Irrigation Technician Jobs - Jubail Saudi

<h3 >About KBR Saudi Arabia and the Welder II Role</h3> <p >KBR Saudi Arabia, through its Sustainable Technology Solutions (STS) division, delivers holistic and value-added solutions across the entire asset life cycle. These solutions encompass world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, and high-end design capabilities. The company is seeking a <strong >Welder II</strong> to join its team in Al Jubail. This full-time position requires 2-5 years of experience in welding operations.</p> <h3 >Core Function of the Welder II</h3> <p >The primary responsibility of the Welder II is to execute all welding jobs on various kinds of material and material combinations according to specified drawings and quality standards. This role also involves the operation of all machines within the welding shop.</p> <h3 >Key Responsibilities</h3> <ul > <li >Lead and support Welder I, Welder II, and Welder III personnel in performing all types of welding jobs as per welding procedures provided by the supervisor.</li> <li >Perform welding activities both in the field and within the plant environment.</li> <li >Monitor ongoing welding jobs to ensure adherence to standards and progress.</li> <li >Assist in field investigation work to support the failure analysis of welding.</li> <li >Log all detailed progress of field work and produce reports for the supervisor.</li> <li >Select correct tools and conduct thorough tool inspections prior to use.</li> </ul> <h3 >Quality and Safety Compliance</h3> <ul > <li >Ensure the completion of all jobs meets specified quality specifications and project schedules.</li> <li >Communicate immediately with the supervisor upon job completion.</li> <li >Ensure full compliance with all safety procedures during welding jobs.</li> <li >Encourage the reporting of unsafe acts and conditions within the workplace.</li> <li >Comply with all Safety, Health, and Environment (SHE) procedures both prior to and during work commencement.</li> <li >Participate in Tool Box talks before commencing any welding job.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >Hold a valid certification issued by a recognized third-party certification body or an accredited Saudi institute, attesting to the individual’s qualifications and competency to perform welding works.</li> <li >2-5 years of demonstrated experience in welding operations.</li> </ul>

<h3 >About the Role</h3> <p >Eram Talent is seeking a skilled Manual Machinist to join our team in Al Jubayl, Saudi Arabia. This is a contract position for a professional with 5-10 years of experience. The role involves working in a dynamic environment where precision and craftsmanship are essential for supporting operations in petrochemical and oil &amp; gas facilities.</p> <h3 >Role Overview</h3> <p >The Manual Machinist is responsible for the machining, repair, and fabrication of precision mechanical components. This position requires the operation of manual and semi-automated machine tools to meet strict dimensional, quality, and safety standards. The machinist will collaborate with maintenance and engineering teams to ensure plant reliability and continuous operations.</p> <h3 >Key Responsibilities</h3> <ul > <li >Operate manual machining equipment, including lathes, milling machines, grinders, and drill presses.</li> <li >Set up machines, select appropriate tools, and determine machining methods.</li> <li >Read and interpret engineering drawings, blueprints, and technical specifications.</li> <li >Machine, modify, and repair components such as shafts, flanges, valves, pumps, and fittings.</li> <li >Measure and inspect parts using precision measuring instruments to ensure accuracy and tolerance compliance.</li> <li >Perform routine maintenance and minor repairs on machining equipment.</li> <li >Adhere to HSE, safety, and quality procedures applicable to petrochemical and oil &amp; gas environments.</li> <li >Maintain clean, organized, and safe work areas.</li> <li >Coordinate with supervisors and maintenance teams to meet operational schedules.</li> </ul> <h3 >Qualifications and Requirements</h3> <ul > <li >Diploma in Industrial Technology (Machining) or an equivalent qualification.</li> <li >Minimum of 5 years of experience as a Machinist.</li> <li >Experience operating manual, semi-automated, and CNC machines.</li> <li >Strong knowledge of machine tools, metal properties, and machining processes.</li> <li >Ability to read and understand blueprints, schematics, and manuals.</li> <li >Good mathematical and analytical skills.</li> <li >Proficiency in English (reading, writing, and speaking).</li> <li >Physically fit with the stamina required for machining tasks.</li> </ul> <h3 >Work Environment</h3> <p >The role is based in Al Jubayl, Saudi Arabia, and involves working within petrochemical and oil &amp; gas facilities. The position requires adherence to strict safety and quality standards inherent to these industrial environments.</p> <h3 >Application Process</h3> <p >Eram Talent is committed to connecting skilled professionals with leading companies. Qualified candidates are encouraged to apply for this Manual Machinist position.</p>

<h3 >About Alfa Laval</h3> <p >Alfa Laval is a global provider of products in heat transfer, separation, and fluid handling. The company focuses on delivering solutions primarily within the energy, environment, food, and marine industries. Alfa Laval is dedicated to addressing challenges and aims to accelerate success for its customers, people, and the planet through a culture that values curiosity and drives progress.</p> <h3 >The Field Service Engineer Role</h3> <p >Alfa Laval's Field Service Operations Department in Al Jubail, Eastern, Saudi Arabia, is seeking a Field Service Engineer. This full-time position is for candidates with 0-1 years of experience. The role involves providing field service support and contributing to the continued growth of operations in a significant industrial market.</p> <h3 >Key Responsibilities</h3> <ul > <li >Maintain a safety-first behavioral attitude, adhering to the Stop-Think-Act principle.</li> <li >Perform installation, commissioning, inspection, repair activities, audits, fault finding, and maintenance of products such as high-speed separators (HSS), decanters, and plate heat exchangers.</li> <li >Troubleshoot Electrical / PLC controls, including EPC controls, 2 touch, basic, and Plus controls, and train customer crews on Alfa Laval equipment.</li> <li >Provide on-site technical support, troubleshooting, and maintenance services.</li> <li >Execute audits and maintenance activities related to Service Agreements.</li> <li >Prepare service reports, documenting every visit and minuting all observations, recommendations, and commitments with the customer.</li> <li >Adhere to all company safety (QHSE) policies, quality, and operational procedures.</li> <li >Effectively use Alfa Laval system tools, including OneService, Lead app, HSE Near miss app (MEA Aleart), E-Learning portal, Workday, and Sensei IB.</li> <li >Generate service business leads by utilizing the FSE Lead app.</li> <li >Report Near Miss incidents using the HSE digital platform (MEA Aleart).</li> <li >Ensure timely submission of service reports, expense reports, payroll information, and customer-signed timesheet service reports.</li> <li >Support Sales functions with technical solutions and participate in technical forums.</li> </ul> <h3 >Required Qualifications and Skills</h3> <ul > <li >0-1 years of experience in a relevant field.</li> <li >A collaborative team player who builds strong relationships with colleagues and maintains a customer focus.</li> <li >Demonstrates open and transparent communication, actively shares knowledge, and possesses a continuous learning mindset.</li> <li >Organized, self-motivated, and results-oriented, with the ability to plan and execute tasks efficiently.</li> <li >Flexible and willing to undertake long-term national and international assignments, as well as work overtime when required.</li> <li >Self-reliant, resilient, and capable of performing effectively under pressure, including responding to assignments with short notice.</li> <li >Adaptable, independent, and robust, with the ability to thrive in a fast-paced environment involving extensive travel and close collaboration with a dynamic regional team.</li> <li >Excellent verbal and written communication skills in English.</li> <li >Proficiency in Microsoft Office applications.</li> <li >Holds a valid driving license; preference will be given to candidates holding a Saudi Arabian or GCC driving license.</li> </ul> <h3 >Workplace Details</h3> <p >The Field Service Engineer position is located at the Alfa Laval Office in Al Jubail, Saudi Arabia. This role is suited for professionals who enjoy working in diverse environments, solving technical challenges, and delivering service to customers while contributing to a high-performing team.</p> <h3 >Company Culture and Opportunities</h3> <p >Alfa Laval offers an open and friendly environment that supports professional development and value creation for customers. As a company with over 130 years of history globally and three decades in the region, Alfa Laval maintains an innovative yet traditional approach. Employees contribute to the company's purpose of accelerating the success of customers, people, and the planet. The role provides opportunities to build a global network, engage with diverse nationalities, and experience continuous learning. Alfa Laval is an equal opportunity employer and values diversity.</p>

<h3 >About Cooperheat Saudi Arabia</h3> <p >Cooperheat Saudi Arabia is a world-class provider of heat treatment services. The company is actively expanding its team and is seeking dedicated professionals to contribute to its operations in Al Jubayl.</p> <h3 >The Role of a Heat Treatment Technician</h3> <p >Cooperheat Saudi Arabia is seeking experienced <strong >Heat Treatment Technicians</strong> to join its growing team in Al Jubayl. This full-time role involves hands-on execution of various industrial heat treatment operations across diverse client sites, ensuring adherence to procedures and safety standards.</p> <h3 >Key Responsibilities and Technical Scope</h3> <p >Heat Treatment Technicians are responsible for a range of specialized tasks, including:</p> <ul > <li >Performing Oil &amp; Gas Fired Heat Treatment / Combustion Heating, including internal and furnace firing.</li> <li >Executing Post Weld Heat Treatment (PWHT) for piping, heavy vessels, and pressure equipment.</li> <li >Conducting Refractory Dry-Out using both electrical resistance and combustion-fired methods.</li> <li >Implementing Electrical Resistance Heating, utilizing 70 KVA and High voltage trolley systems, and four bank channel elements.</li> <li >Installing thermocouples, and managing temperature measurement, control, monitoring, and recording.</li> <li >Setting up, operating, troubleshooting, and maintaining heat treatment equipment.</li> <li >Setting up, installing, and operating temporary furnaces.</li> <li >Reading heat treatment procedures, interpreting P&amp;IDs and drawings, and preparing field documentation.</li> </ul> <h3 >Candidate Requirements</h3> <p >Prospective candidates should meet the following criteria:</p> <ul > <li >Proven field experience in industrial heat treatment operations.</li> <li >Ability to work safely, independently, and as part of a team.</li> <li >A Diploma in Electrical, Electronics, Instrumentation, or Mechanical Engineering is preferred.</li> <li >Previous experience in Saudi Arabia or the GCC oil &amp; gas industry is considered a distinct advantage.</li> </ul> <h3 >Work Environment and Location</h3> <p >This role involves site execution at various industrial facilities, including refineries, petrochemical plants, power plants, fabrication yards, and oil &amp; gas facilities. Technicians must be prepared to work in demanding industrial environments within Al Jubayl and surrounding areas.</p> <h3 >Application</h3> <p >Qualified candidates are invited to apply for this full-time position. Salary details will be discussed during the interview process.</p>

<h3 >About the Role</h3> <p >Amentum is seeking an <strong >Aviation Electrician Lead</strong> to perform comprehensive electrical maintenance on H-60 helicopters. This full-time position is based in Al Jubail, Eastern Province, Saudi Arabia, and requires a skilled electrician capable of executing Planned Maintenance Interval Inspections (PMI), Organizational, Intermediate, and Depot level maintenance.</p> <h3 >Key Responsibilities</h3> <ul > <li >Perform maintenance and repair of major assemblies, subassemblies, and wire and connector replacements on H-60 aircraft and related systems.</li> <li >Conduct inspection, troubleshooting, fault detection, fault isolation, and implement corrective actions on electrical and utilities systems.</li> <li >Operate and maintain all applicable ground support equipment.</li> <li >Identify, use, and maintain common, special, and precision tools for powerplant maintenance and repair.</li> <li >Manage all maintenance documentation, applicable forms, records, and reports using appropriate references and publications, including the NAMP.</li> <li >Provide On-the-Job-Training (OJT) for Saudi technicians and other personnel, including maintaining training records.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >8 years of current or previous experience performing complex helicopter electrical work, including inspections, testing, adjusting, aligning, assembly/disassembly, repair, replacement, modification, and troubleshooting of aircraft electrical systems, equipment, AC/DC power, flight controls, fire detection, power distribution, fuel, and utilities systems.</li> <li >Ability to correct discrepancies by removing, repairing, or replacing defective circuits, wires, connectors, control units, plugs, switches, circuit breakers, diodes, resistors, capacitors, relays, and other parts of aircraft electrical systems.</li> <li >Proficiency in performing final functional checks on existing and newly installed aircraft electrical systems, equipment, wiring, and cables to verify continuity, resistance, amperage, and insulation breakdown using standard and specialized tools.</li> <li >Comprehensive knowledge of electrical theory, principles, circuitry, circuit configuration, aircraft electrical systems and their interrelationships, and a working knowledge of electronic principles.</li> <li >Ability to trace signal paths through printed circuits and aircraft wiring to troubleshoot, modify, repair, overhaul, and maintain complex electrical systems such as antiskid, automatic flight control, and fuel indicating systems.</li> <li >Ability to read and interpret blueprints, wiring diagrams, schematic diagrams, and technical directives.</li> <li >Candidates must pass a background check and drug test. The role may also require obtaining and maintaining a secret clearance.</li> </ul> <h3 >Work Environment and Physical Demands</h3> <p >This role requires the ability to perform essential duties satisfactorily. Physical demands include walking and standing on level and inclined surfaces for extended periods, climbing stairs, ramps, ladders, and work stands. The ability to lift 50 pounds, distinguish color, and judge three-dimensional depth is also required.</p> <h3 >Commitment to Safety and Quality</h3> <p >Amentum maintains a strong safety culture, requiring all employees to continuously develop and maintain a safe work environment, complete training requirements, and participate in emergency response tasks. Quality is foundational to the business, and employees are expected to consistently provide services that meet customer expectations, conforming to the Amentum Quality Policy and applicable Quality System documents.</p>

<h3><strong>About MSA - The Safety Company</strong></h3><p>At MSA, safety is central to our identity and operations. We are a purpose-driven company dedicated to leveraging innovation and technology to deliver on our mission: to help protect people and assets all around the world. MSA is committed to continuously addressing customer challenges to ensure safety each and every day.</p><h3><strong>Role Overview</strong></h3><p>MSA - The Safety Company is seeking a <strong>Junior Technical Service Engineer</strong> for a full-time, permanent position based in Al Jubail, Eastern region. This role reports to the Middle East FGFD Services and Solutions Leader and is responsible for managing various service assignments. The position also involves promoting MSA’s service business by maintaining and developing relationships with established Authorized Service Partners (ASPs), channel partners, existing customers, and new customers.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Commissioning of gas detectors, control panels, HVAC-R and monitoring systems, and other MSA Industrial PPE and Fire Services products.</li><li>Performing servicing, maintenance, on-site calibration, repair, and training activities within Saudi Arabia.</li></ul><h3><strong>Service Execution and Support</strong></h3><ul><li>Co-ordinating with the FGFD Service and Projects team to plan and execute project commissioning schedules.</li><li>Collaborating with authorized service partners and guiding end-users on calibration, repair, maintenance, and training.</li><li>Providing sales support to country and field sales managers for MSA products as required.</li><li>Engaging with Middle East HQ to resolve warranty, quality, and product/spare parts challenges.</li><li>Promoting MSA Services, managing service visits, on-site commissioning, and assisting ASPs in securing Annual Maintenance Contracts.</li><li>Executing on-site paid repair, maintenance, and preventive maintenance.</li><li>Collecting data and images of products, including competitive brands, to support business intelligence.</li><li>Assisting the Quality Engineer by preparing field visit reports for customer quality notes and managing warranty replacements.</li><li>Providing inspection, service, site visit reports, and calibration certificates.</li><li>Supporting customers with spare parts, services, and training via telephone, email, face-to-face, and on-site assistance.</li><li>Reporting customer issues to management and proposing solutions.</li><li>Collaborating with Service Engineers and Sales Managers, and raising alerts for potential negative impacts on MSA functions.</li><li>Offering sales support to the customer-facing team as necessary.</li></ul><h3><strong>Authorized Service Partner (ASP) Engagement</strong></h3><ul><li>Assisting in the implementation of MSA Service policies with selected/certified channel partners in NON-ARAMCO accounts.</li><li>Periodically visiting ASPs to address service challenges, conduct annual audits, and ensure compliance.</li><li>Developing strong customer relationships through responsive service.</li><li>Organizing and attending service meetings and training as required.</li><li>Expanding service support coverage across underserved markets.</li></ul><h3><strong>Required Experience</strong></h3><p>Candidates should possess <strong>3-5 years</strong> of relevant professional experience to be considered for this role.</p>

<h3 >About the Role</h3> <p >Zeppelin Systems Gulf is seeking a <strong >MIG/TIG Aluminium Welder</strong> to join its operations team in Al Jubail, Saudi Arabia. This is a full-time, long-term assignment focused on contributing to high-quality industrial projects within an international work environment. The role is integral to supporting the continued technical excellence of the company.</p> <h3 >Key Responsibilities</h3> <ul > <li >Perform high-quality MIG and TIG welding on aluminium components and structures.</li> <li >Prepare materials, including cutting, grinding, and fitting aluminium parts.</li> <li >Inspect welds to ensure compliance with industry standards and internal quality requirements.</li> <li >Conduct finishing operations such as polishing, deburring, and surface preparation.</li> <li >Maintain welding equipment and ensure proper calibration and functionality.</li> <li >Collaborate with fabrication, engineering, and production teams to meet project timelines.</li> <li >Follow all safety protocols, ensuring a clean and hazard-free working environment.</li> <li >Support continuous improvement initiatives in welding processes and fabrication quality.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Proven expertise in MIG and TIG welding, specifically for aluminium.</li> <li >Strong understanding of fabrication techniques and quality standards.</li> <li >Ability to produce clean, precise welds with minimal distortion.</li> <li >Experience using fabrication tools, including cutting machines, grinders, and measuring instruments.</li> <li >Familiarity with safety standards and best practices in welding operations.</li> </ul> <h3 >Required Skills and Attributes</h3> <ul > <li >High attention to detail, reliability, and a structured working style.</li> <li >Ability to identify issues early and maintain consistent accuracy.</li> <li >Good communication skills.</li> </ul> <h3 >Work Environment and Assignment</h3> <p >This full-time position is based in Al Jubail, Saudi Arabia. The role requires a commitment to a long-term assignment within an international industrial setting, contributing to the operational success of Zeppelin Systems Gulf.</p>

<h3 >About the Role</h3> <p >Applicantz is seeking an experienced <strong >Technical Evaluator Operations</strong> for a contract position based in Al Jubail, Eastern, Saudi Arabia. This role is crucial for providing technical assessment, evaluation, and operational support across critical refinery process units.</p> <h3 >Role Purpose</h3> <p >The primary purpose of this position is to ensure the optimal performance, reliability, and compliance of refinery operations with established engineering and safety standards. The Technical Evaluator Operations will conduct thorough assessments and provide essential technical guidance to maintain operational integrity.</p> <h3 >Key Responsibilities</h3> <ul > <li >Conduct technical evaluations and performance assessments of refinery process units and operations.</li> <li >Provide operational and technical support for specific units, including Fluidized Catalytic Cracking Unit (FCCU), Unsaturated Gas Plant, Alkylation Unit, Sulfuric Acid Recovery Unit, and Selective Hydrogenation Unit.</li> <li >Review and analyze process data to identify performance gaps, deviations, and opportunities for improvement.</li> <li >Evaluate operational procedures, technical proposals, and contractor submissions related to process units.</li> <li >Support troubleshooting, root cause analysis, and technical investigations for process upsets.</li> <li >Coordinate with process engineering, operations, and maintenance teams on unit performance and reliability.</li> <li >Ensure evaluations align with Health, Safety, and Environment (HSE), quality, and refinery operating standards.</li> <li >Prepare technical evaluation reports and recommendations for operational improvements.</li> <li >Support turnaround planning and technical readiness reviews for relevant units.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >A minimum of <strong >5 to 10 years</strong> of relevant experience in technical evaluation or operations within a refinery environment.</li> <li >Prior experience in a Saudi Aramco or other major refinery environment is preferred.</li> </ul> <h3 >Work Arrangement and Location</h3> <p >This is a <strong >contract position</strong> located in <strong >Al Jubail, Eastern, Saudi Arabia</strong>. The role requires on-site presence to provide direct support and evaluation within refinery operations.</p> <h3 >Application Process</h3> <p >Interested candidates are encouraged to apply. Salary details for this contract role will be discussed directly with qualified applicants during the interview process.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br><ul><li><p>Configure, integrate, test, and commission industrial communication networks in accordance with ARAMCO standards.</p></li><li><p>Perform installation, patching, testing, and troubleshooting of Optical Fiber Cable (OSP/FOC) networks using OTDR, optical power meters, laser sources, and related test equipment.</p></li><li><p>Configure and manage Layer 1 and Layer 2 network infrastructure, including network rings for operational redundancy.</p></li><li><p>Configure, harden, and troubleshoot industrial switches and routers such as <strong>MOXA, Cisco</strong>, and equivalent networking equipment.</p></li><li><p>Implement and maintain VLAN configuration, tagging, and network segmentation.</p></li><li><p>Support SCADA communication networks, Remote Terminal Units (RTUs), and other industrial automation systems.</p></li><li><p>Implement and troubleshoot ARAMCO Network Ring Protection and redundancy protocols.</p></li><li><p>Perform network diagnostics, fault isolation, and corrective maintenance to ensure high network availability.</p></li><li><p>Prepare technical documentation, test reports, as-built documentation, and commissioning records.</p></li><li><p>Coordinate with project engineers, vendors, and client representatives during installation, testing, and commissioning activities.</p></li><li><p>Ensure all activities comply with ARAMCO engineering standards, HSE requirements, and project specifications.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Cisco CCNA/CCNP certification is an advantage.</p><p>MOXA Industrial Networking certification is preferred.</p><p>Experience with industrial communication protocols and Ethernet-based automation networks.</p><p>Previous experience in oil &amp; gas, petrochemical, or industrial projects.</p><br><p>Employment Details</p><p><strong>Location:</strong> Jubail, Saudi Arabia</p><p><strong>Contract Duration:</strong> 3–6 Months</p><p><strong>Project:</strong> ARAMCO Industrial Communication Network Project</p><p><strong>Joining:</strong> Immediate or as per project requirement</p><p></p></section>