Interior Designer Jobs in Saudi

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>WSP Middle East is currently seeking a Principal Engineer – Electrical (Rail Stations) to join our team in Riyadh, Saudi Arabia.</p><br><p>The successful candidate will lead the electrical design and integration of rail/metro/train station fit-out systems from concept through IFC, tender and construction support. You’ll own the LV power and lighting for stations, ancillary buildings and platforms, ensuring safety, reliability, maintainability and authority approval in KSA</p><br><br>Responsibilities:<br><ul><li><p><span>Lead multi-disciplinary station electrical design: LV/MV building distribution, protection/coordination, earthing &amp; bonding, lightning protection, standby generators &amp; UPS, lighting &amp; controls, across underground, at-grade, and elevated stations.&nbsp;</span></p><br></li><li><p><span>Own the full design lifecycle: requirements capture, basis-of-design, load studies, selectivity/arc-flash reviews, single-lines, schematics, cable schedules, layouts, specs/BOQs, and employer’s requirements. Provide construction support as needed.</span></p><br></li><li><p><span>Apply rail-specific life-safety standards in stations: e.g., NFPA 130 for fixed guideway transit (egress, fire protection, emergency ventilation &amp; control/communications); coordinate with fire/life-safety, ventilation and architectural teams.&nbsp;</span></p><br></li><li><p><span>Design compliant emergency lighting to EN 1838/BS 5266 (escape route, open-area, high-risk task) and produce photometric calculations &amp; layouts (Dialux/Relux).&nbsp;</span></p><br></li><li><p><span>Engineer EMC &amp; earthing interfaces to EN 50121 (railway EMC) and EN 50122-1 (earthing/bonding for fixed installations) and manage interfaces with signaling/telecom/PSD.&nbsp;</span></p><br></li><li><p><span>Coordinate digitally in BIM (Revit/ Navisworks) with architecture, structural and MEP; run design reviews, clash prevention and interface matrices.&nbsp;</span></p><br></li><li><p><span>Lead authority approvals (Saudi &amp; UAE Civil Defence and utilities), support client/stakeholder workshops, value engineering and risk registers.</span></p><br></li><li><p><span>Mentor and manage a team of designers; review deliverables, uphold QA/QC; contribute to proposal writing and level-of-effort estimates.</span></p><br></li></ul><br>Qualifications:<br><ul><li>Bachelor’s or Master’s degree in Electrical Engineering.</li><li>Professional registration (e.g., CEng/PE) strongly preferred.</li><li>12–18+ years in building/station electrical design with major rail/metro station projects; GCC experience strongly preferred.</li><li>Strong grasp of NFPA 130, EN 1838/BS 5266 (emergency lighting), EN 50121/EN 50122 (EMC/earthing), BS 7671/IET Wiring Regs or NEC, and typical rail authority requirements.&nbsp;</li><li>Fluency with ETAP/Amtech, Dialux/Relux, AutoCAD/Revit, and BIM coordination; familiarity with SCADA/BMS interfaces for station systems.&nbsp;</li><li><p>Excellent interface management, stakeholder communication and team leadership skills.</p><br><p><strong>Nice to Have</strong></p><br></li><li>Experience integrating station electrical design with PSD, tunnel ventilation controls, SCS/OCS interfaces, and evacuation strategies per NFPA 130.&nbsp;</li><li>Past authority liaison in KSA (RCRC/SDAIA utilities/Civil Defense)</li><li>RAMS exposure (EN 50126/8/9) and cyber/physical security considerations for stations.</li></ul><p><strong>Imagine a better future for you and a better future for us all.</strong></p><br><p>Join our close-knit community of talented individuals who share your passion for making a positive impact. Our global team includes more than 69,000 employees, working together to make a difference in communities both close to home and around the world.</p><br><p><strong>With us, you can. Apply today.</strong></p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p><br></p><p>Create and deliver engaging visual content across digital, print, and multimedia platforms in line with SLS brand standards. Design marketing materials including social media assets, digital campaigns, eDMs, brochures, flyers, menus, event collateral, and in-property signage. Develop creative concepts and visual solutions that support marketing campaigns and business objectives. Collaborate with the Marketing &amp; Communications team to translate briefs into impactful design outputs. Create motion graphics, short-form videos, animations, and digital content for social media, events, and guest-facing platforms. Edit and enhance video content through animation, typography, visual effects, and creative storytelling techniques. Ensure brand consistency across all creative touchpoints while maintaining alignment with global brand guidelines. Support F&amp;B, Events, Spa, and Rooms teams with customized promotional materials and branded creative assets. Assist with photo and video shoots including styling, creative direction, image selection, and post-production editing. Retouch, resize, and adapt visual assets for different platforms and communication channels. Work closely with photographers, videographers, and external creative partners to ensure quality and consistency. Collaborate with Revenue and E-Commerce teams to develop visually engaging assets that support conversion and commercial performance. Manage multiple creative projects while meeting deadlines and maintaining a high standard of quality. Stay updated on emerging design trends, digital content formats, animation techniques, and luxury lifestyle aesthetics. Suggest new creative approaches, technologies, and formats to enhance the brand's visual presence. Maintain organized design files, templates, and creative assets for efficient team access. Represent SLS The Red Sea with creativity, professionalism, and a passion for storytelling.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Graphic Design, Multimedia Design, Visual Communication, or a related field.</li><li>Minimum of 3 years experience in a similar graphic design role, preferably within luxury hospitality, lifestyle, or premium consumer brands.</li><li>Strong portfolio demonstrating expertise in branding, digital design, storytelling, and motion content.</li><li>Advanced proficiency in Adobe Creative Suite including Photoshop, Illustrator, InDesign, After Effects, and Premiere Pro.</li><li>Strong understanding of design principles including typography, layout, color theory, visual hierarchy, and digital formats.</li><li>Experience creating content for social media platforms including Instagram, TikTok, and YouTube.</li><li>Creative mindset with strong attention to detail and a passion for high-quality visual experiences.</li><li>Ability to manage multiple projects, prioritize tasks, and meet deadlines in a fast-paced environment.</li><li>Strong communication skills with the ability to collaborate with different teams and stakeholders.</li><li>Ability to work independently while taking direction from Marketing &amp; Communications leadership.</li><li>Fluent in English, both written and spoken.</li></ul>

<h3 >About the Role</h3> <p >Al Dossary Trading &amp; Real Estate is seeking a <strong >Site Engineer</strong> to join its project team in <strong >Dammam</strong>. This <strong >full-time</strong> position involves managing daily site activities, supervising works, and coordinating with subcontractors to ensure projects, particularly <strong >commercial fit-out works</strong>, are delivered on time, within scope, and in compliance with quality and safety standards. The role offers a salary range of <strong >$1,500 - $2,000</strong>.</p> <h3 >Key Responsibilities</h3> <ul > <li >Supervise daily construction activities, ensuring works are carried out according to approved drawings, specifications, and schedules.</li> <li >Monitor site progress and report regularly to the Project Manager.</li> <li >Manage and supervise commercial fit-out activities, including interior finishes, ceiling systems, partitions, flooring, joinery, carpentry, and MEP coordination with finishing works.</li> <li >Review, coordinate, and follow up on shop drawings and material submittals, ensuring all site works align with approved shop drawings.</li> <li >Assign daily tasks to foremen and subcontractors, track progress, and conduct internal handovers between trades.</li> <li >Prepare and manage handover packages for completed areas, including snag lists, test reports, and inspection approvals, and coordinate final handover with the client/consultant.</li> <li >Liaise with consultants, clients, subcontractors, and suppliers, attending site meetings and preparing progress updates.</li> <li >Implement QA/QC procedures on site, conduct inspections, and ensure rectification of defects and closure of snags.</li> <li >Ensure compliance with quality standards, safety regulations, and overall project requirements.</li> </ul> <h3 >Required Qualifications</h3> <ul > <li >Bachelor’s degree in Civil Engineering, Construction Engineering, or a related field.</li> <li >3–6 years of relevant experience as a Site Engineer.</li> <li >Proven experience in commercial fit-out projects, including offices, retail spaces, restaurants, hotels, and showrooms.</li> <li >Hands-on experience in site supervision, task allocation and work planning, handover procedures and snagging, and coordination of shop drawings and technical submittals.</li> <li >Certification in construction management or site supervision is an advantage.</li> </ul> <h3 >Essential Skills and Competencies</h3> <ul > <li >Strong ability to read and interpret Architectural, Structural, and MEP drawings.</li> <li >Solid knowledge of fit-out construction methods and materials.</li> <li >Proficiency in AutoCAD and MS Office (Excel, Word, Outlook).</li> <li >Familiarity with Project schedules, Inspection &amp; Test Plans (ITPs), and Quality Control procedures.</li> <li >Ability to supervise subcontractors and site teams effectively, distribute daily tasks, and monitor performance.</li> <li >Experience in managing internal and external handovers and preparing comprehensive handover documents.</li> <li >Good knowledge of QA/QC procedures and site safety regulations, with the ability to conduct inspections and enforce safety compliance.</li> <li >Strong leadership and team-management skills.</li> <li >Excellent communication (verbal &amp; written), time management, problem-solving, and decision-making abilities.</li> <li >High level of professionalism, responsibility, and attention to detail.</li> </ul> <h3 >Work Environment and Additional Information</h3> <ul > <li >Ability to work under pressure and meet tight deadlines.</li> <li >Willingness to work extended hours when required by project demands.</li> <li >Experience working in Saudi Arabia or the GCC region is an advantage.</li> <li >A valid driving license is a plus.</li> </ul> <h3 >Application Process</h3> <p >Candidates who meet the above requirements are invited to submit their application for this full-time role.</p>

About Fly Akeed:<br><br>Fly Akeed is an innovative online platform focused on transforming the travel booking experience by enabling seamless flight and hotel reservations. Established in 2017 and headquartered in Riyadh, Saudi Arabia, we aim to simplify work-related travel planning for businesses and individuals alike.<br><br>Highlights:<br><br>Current funding stage: Series A<br><br>Fly Akeed is proudly backed by notable investors including PIF subsidiary Sanabil Investments, Elm, Artal Capital, and Alrajhi Partners.<br><br>About The Role<br><br>We are looking for an experienced Product Design Led to define the design vision, strategy, and execution across our products. You will lead end-to-end product design, mentor designers, establish scalable design systems, and work closely with Product and Engineering to deliver exceptional user experiences.<br><br>This role combines hands-on product design with leadership, driving both product quality and design excellence across the company.<br><br>Responsibilities<br><br>Define and drive the overall product design strategy aligned with business goals Lead end-to-end product design from discovery and research to high-fidelity UI and production handoff Mentor and support designers through coaching, feedback, and career development Collaborate closely with Product Managers, Engineers, and stakeholders to shape product direction Conduct user research, usability testing, and translate insights into impactful product decisions Create user flows, wireframes, prototypes, and polished user interfaces Build, maintain, and evolve a scalable design system Ensure consistency, accessibility, and usability across all products Facilitate design critiques, workshops, and cross-functional collaboration Champion user-centered design and data-informed decision making Leverage modern AI tools and workflows to accelerate design, validation, and implementation<br><br>Requirements<br><br>5+ years of experience in Product Design, UX/UI Design, or a related role Proven experience leading projects or mentoring designers Strong portfolio demonstrating end-to-end product design for web and mobile applications Expertise in Figma, prototyping, interaction design, design tokens and design systems Strong product thinking with the ability to balance user needs, business objectives, and technical constraints Familiarity with frontend technologies (HTML, CSS, Tailwind css, React) and the ability to communicate effectively with engineers Experience with AI-powered design-to-code workflows, including tools such as Codex, Cursor, or Claude Code Hands-on experience with Storybook Comfortable reviewing implementation, contributing to design quality in code, and collaborating throughout the development process Excellent communication, leadership, presentation, and stakeholder management skills Experience working in Agile product teams<br><br>Nice to Have<br><br>Experience designing AI-native products or developer tools Knowledge of accessibility standards (WCAG) and inclusive design Experience with product analytics and experimentation Basic frontend development experience Passion for emerging AI technologies and modern product development workflows

???? We’re Hiring | Graphic Designer & Digital Marketing Specialist<br><br><br>Reval is looking for a creative, analytical, and results-driven Graphic Designer & Digital Marketing Specialist to join our marketing team in Jeddah, Saudi Arabia.<br><br><br>???? Location: Jeddah, Saudi Arabia<br>???? Employment Type: Full-time<br><br><br>???? Key Responsibilities<br><br><br>* Develop creative content and visual materials across digital and traditional platforms.<br>* Create social media posts, stories, presentations, marketing materials, and short-form videos.<br>* Develop and maintain consistent visual branding and brand identity.<br>* Plan, execute, and manage digital marketing campaigns.<br>* Manage paid advertising campaigns across Meta Ads & Google Ads.<br>* Monitor campaign performance and prepare reports based on key marketing KPIs.<br>* Analyze results and recommend improvements to maximize campaign performance.<br>* Collaborate with the Sales and Content teams to ensure consistent brand messaging.<br><br><br>✅ Requirements<br><br><br>* Minimum 1 years of experience in graphic design and digital marketing.<br>* Strong proficiency in Adobe Photoshop, Illustrator, and Premiere Pro or equivalent tools.<br>* Experience with Canva and social media content creation.<br>* Hands-on experience managing Meta Ads and Google Ads campaigns.<br>* Strong analytical skills and ability to understand marketing KPIs and performance reports.<br>* Fluency in Arabic and English, both written and spoken.<br>* Ability to work under deadlines and collaborate effectively within a team.<br>* Strong creativity, attention to detail, and communication skills.<br><br><br>⭐ Preferred Qualifications<br><br><br>* Working knowledge of SEO principles.<br>* Experience with short-form video / Reels.<br>* Strong understanding of social media trends and digital content.<br>* Portfolio of previous work is required.<br><br><br>???? How to Apply<br><br><br>Please send your CV and Portfolio to:<br><br><br>job@Reval-sa.com<br><br><br>Subject: Graphic Designer & Digital Marketing Specialist<br><br><br>???? Be part of Reval’s journey and help us build impactful brands through creativity, strategy, and digital marketing.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Description</b><p><b>Overview</b></p><br><p>We are looking for an experienced Principal Mechanical Engineer to join our team. The ideal candidate will have hands-on experience in the design and implementation of mechanical systems for a variety of entertainment projects. This role involves designing mechanical systems such as HVAC systems and other building-specific mechanical systems, ensuring they meet all performance, efficiency, and regulatory standards.</p><br><p><b>Your role</b></p><br><ul><li><p>Design mechanical systems for buildings, including HVAC (heating, ventilation, and air conditioning), and other mechanical essential systems.</p><br></li><li><p>Produce detailed design documentation, including drawings, calculations, and specifications to meet client requirements and applicable building codes and standards.</p><br></li><li><p>Perform system sizing, load calculations, and energy modelling to optimize the performance, efficiency, and cost-effectiveness of mechanical systems.</p><br></li><li><p>Collaborate closely with other disciplines (architects, electrical engineers, structural engineers) to ensure that mechanical systems are integrated into the overall building design seamlessly.</p><br></li><li><p>Conduct site visits to assess building conditions, verify measurements, and ensure designs are feasible based on existing or proposed conditions.</p><br></li><li><p>Liaise with clients, contractors, and subcontractors to clarify design requirements, provide technical support, and ensure the smooth progression of the project.</p><br></li><li><p>Ensure that all mechanical designs and systems adhere to local building codes, industry standards, and safety regulations.</p><br></li><li><p>Stay up-to-date with the latest design software, industry practices, and regulatory changes to ensure the best possible solutions.</p><br></li><li><p>Perform design reviews and quality checks to ensure the accuracy and quality of deliverables.</p><br></li><li><p>Integrate energy-efficient systems and sustainable technologies, such as renewable energy systems, into designs to meet environmental and energy goals.</p><br></li><li><p>Assist in achieving building certifications (e.g., LEED, BREEAM) by designing energy-efficient and environmentally responsible systems.</p><br></li><li><p>Provide technical support to construction teams during installation and commissioning of mechanical systems.</p><br></li><li><p>Address any design issues that arise during the construction phase and suggest solutions to ensure the systems are installed according to specifications.</p><br></li><li><p>Conduct site inspections and performance testing to ensure systems operate as designed.</p><br></li><li><p>Maintain comprehensive documentation of designs, system specifications, and calculations.</p><br></li><li><p>Prepare and present reports for clients, stakeholders, and regulatory authorities.</p><br></li></ul><p><b>About you</b></p><br><ul><li><p>Bachelor’s degree in Mechanical Engineering or a related field.</p><br></li><li><p>Minimum 12 years of experience as a Mechanical Design Engineer, with a focus on building services or HVAC design.</p><br></li><li><p>Proficiency in mechanical design software such as AutoCAD, Revit, Hap and other relevant engineering tools.</p><br></li><li><p>Solid understanding of mechanical building systems (HVAC, plumbing, fire protection) and their integration into overall building designs.</p><br></li><li><p>Strong knowledge of local building codes, standards (ASHRAE, CIBSE), and regulations related to mechanical systems.</p><br></li><li><p>Experience working on entertainment projects is required.</p><br></li><li><p>Familiarity with sustainable building design practices, energy efficiency measures, and green building certifications (LEED, BREEAM) is a plus.</p><br></li><li><p>Experience with BIM (Building Information Modeling) for mechanical system design.</p><br></li><li><p>Knowledge of energy modeling and simulation tools.</p><br></li><li><p>Familiarity with commissioning and testing procedures for mechanical systems.</p><br></li><li><p>Ability to manage multiple projects simultaneously and effectively meet deadlines.</p><br></li><li><p>Strong analytical and problem-solving skills, with attention to detail.</p><br></li><li><p>Excellent communication skills, both written and verbal.</p><br></li></ul>Rewards &amp; benefits<p>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.</p><br><p>This includes:</p><br><ul><li>Tax-free salary.</li><li>Comprehensive life insurance coverage.</li><li>Premium medical insurance for you and your dependents.</li><li>Generous annual leave balance.</li><li>Flexible and hybrid work solutions.</li><li>Remote work opportunities outside of country.</li><li>Company gratuity scheme.</li><li>Discretionary bonus program.</li><li>Annual flight contribution.</li><li>Relocation assistance.</li><li>Transportation &amp; housing allowances (available for remote work locations).</li><li>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition.</li></ul><p>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</p><br><p><b>About AtkinsRéalis</b></p><br><p>We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people.</p><br><p>Find out more.</p><br><b>Worker Type</b>Employee<b>Job Type</b>Regular<p><span><i>At </i></span> <i><span>AtkinsRéalis</span></i><span><i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. &nbsp;</i></span></p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Description</b>Overview<p>AtkinsRéalis is seeking a highly experienced Senior Electrical Engineer to support the design, review, coordination, and construction supervision of major high-rise residential, commercial, hospitality, mixed-use, and large-scale building developments in Madinah, Saudi Arabia. The successful candidate will provide technical leadership for all electrical engineering systems, ensuring compliance with project requirements, Saudi regulations, international standards, sustainability objectives, and project delivery milestones</p><br>Your role<ul><li>Lead the design and review of mechanical building services systems for high-rise and mixed- Lead the design, review, and coordination of electrical systems for high-rise and complex building developments.</li><li>Review and approve electrical calculations, load schedules, single-line diagrams, technical reports, and specifications.</li><li>Perform electrical load assessments, voltage drop calculations, short-circuit studies, protection coordination studies, and power system analysis.</li><li>Coordinate with architects, structural engineers, mechanical engineers, fire and life safety consultants, and specialist contractors to ensure seamless system integration.</li><li>Review contractor submissions including shop drawings, material submittals, technical queries, method statements, and testing procedures.</li><li>Conduct technical reviews to ensure compliance with project specifications, Saudi Building Code (SBC), SEC requirements, and international standards.</li><li>Monitor electrical construction activities to ensure installations comply with approved drawings, project quality requirements, and safety standards.</li><li>Conduct site inspections and witness testing, commissioning, and energization activities.</li><li>Support authority submissions and approval processes with relevant utility providers and regulatory authorities.</li><li>Lead multidisciplinary design reviews, value engineering workshops, and technical coordination meetings.</li><li>Identify and resolve design, construction, and commissioning issues to minimize project risks and delays.</li><li>Support project handover activities and verify testing and commissioning documentation.</li><li>Implement energy-efficient and sustainable electrical design solutions, including renewable energy integration where applicable.</li><li>Provide mentoring and technical guidance to junior engineers and project teams.</li><li>Prepare technical reports, progress updates, and engineering recommendations for clients and project stakeholders.</li></ul>About you<ul><li>Bachelor’s degree in electrical engineering from a recognized university.</li><li>Master’s degree in electrical engineering or Building Services Engineering is preferred.</li><li>Professional Engineer registration or Chartered Engineer status is preferred.</li><li>Membership of recognized professional bodies such as IEEE, IET, or Saudi Council of Engineers (SCE) is desirable.</li><li>LEED AP, Mostadam, or other sustainability-related certifications are an advantage.</li><li>15 to 20 years of professional electrical engineering experience.</li><li>Minimum 10 years of experience on major high-rise and large-scale building projects.</li><li>Previous experience in Saudi Arabia or GCC countries is highly preferred.</li><li>Experience in consultant, PMC, or multidisciplinary engineering consultancy environments.</li><li>Demonstrated involvement in projects from concept design through construction, commissioning, and handover.</li><li>Strong expertise in electrical building services design and engineering.</li><li>Experience with power system studies and electrical distribution network design.</li><li>Strong understanding of ELV systems, smart building technologies, and BMS integration.</li><li>Experience in sustainable and energy-efficient building design solutions.</li><li>Familiarity with testing, commissioning, and energization procedures.</li></ul><span>Rewards &amp; benefits</span><p><span>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.</span></p><br><p><span>This includes:</span></p><br><ul><li>Tax-free salary.</li><li>Life insurance coverage.</li><li>Medical insurance.</li><li>Annual leave balance.</li><li>Company gratuity scheme.</li><li>Discretionary bonus program.</li><li>Annual flight contribution.</li><li>Transportation &amp; housing allowances.</li><li>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition.</li></ul><p><span>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</span></p><br><span>About AtkinsRéalis</span><p><span>We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people. </span></p><br><p><span>Find out more.</span></p><br><p><b>#Med</b></p><br><b>Worker Type</b>Employee<b>Job Type</b>Regular<p><span><i>At </i></span> <i><span>AtkinsRéalis</span></i><span><i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. &nbsp;</i></span></p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Civil Engineer Eastern Province, Saudi Arabia · Full-time · On-site<br>About the role We are hiring a Civil Engineer to join our Engineering & Consulting department. The role provides civil engineering consulting, design support, and technical advisory services across a diversified portfolio of commercial, industrial, and residential facilities — covering structural assessment, construction supervision, facility planning, and infrastructure design.<br>This is an individual contributor position reporting to the Head of Engineering. The focus is on producing engineering deliverables, conducting site assessments, and supporting the operations team with technical guidance on civil works. It suits an engineer who is comfortable owning a deliverable end to end, moving between desk work and site work, and advising internal clients directly rather than working behind a large project hierarchy.<br>What you will do Civil engineering design and consulting· Prepare civil engineering designs, calculations, and specifications including structural elements, foundations, drainage, and site works· Conduct site assessments, feasibility studies, and condition surveys for existing and proposed facilities· Provide technical consulting on civil infrastructure — tanks, wells, piping, building modifications, and facility layouts· Support institutional and community projects with design and owner's representative services Drawing production and review· Prepare and review civil engineering drawings in Auto CAD; coordinate with offshore CAD drafters for production support· Ensure all drawings comply with Saudi building codes, municipal regulations, and project specifications· Maintain revision control and proper documentation of all civil engineering deliverables Technical support to operations· Provide civil engineering support for fit-out, renovation, and maintenance projects· Advise on structural modifications, load-bearing assessments, and construction methods· Review contractor submissions, shop drawings, and material submittals for civil works Coordination and reporting· Coordinate with the MEP Engineer on multi-discipline projects· Liaise with external engineering offices and contractors· Prepare technical reports and engineering assessments<br>What we are looking for· Bachelor's degree in Civil Engineering· Saudi Council of Engineers registration (required)· 5 to 8 years in civil engineering design, site supervision, or consulting· Experience with structural design, facility assessment, and construction supervision in commercial or industrial settings· Proficiency in Auto CAD; working knowledge of Saudi building codes· Familiarity with fit-out and renovation work is an advantage· Arabic and English<br>How you will be measured· Accuracy and completeness of engineering deliverables· Turnaround on design and assessment requests· Zero regulatory or building code issues in submitted work· Feedback from internal clients on consulting engagements

JOB DESCRIPTION - PROJECT MANAGER<br>The Project Manager is a senior leader responsible for overseeing all activities before the construction phase of a project begins. This includes managing the project design process, ensuring alignment with the Client’s cost plan, securing the necessary relevant statutory approvals and coordinating with the Client to manage the tender process until awarding the contract. The role ends at commencing the construction project at site.<br>Responsibilities:<br>· Project Management:- Oversee the successful completion of assigned preconstruction projects, managing financials, risk management, and client relations throughout the preconstruction phase.- Execute and manage design projects from inception to completion, ensuring alignment with client requirements and company standards.- Ensure that all design work meets high-quality standards and adheres to industry best practices.<br>· Team Coordination:- Lead and mentor project teams, ensuring effective collaboration and communication among team members, clients, architects, and subcontractors.- Collaborate with design teams, clients, and stakeholders to manage project timelines, resources, and deliverables.<br>· Resource Management:- Allocate design resources effectively and monitor project budgets to ensure financial targets are met.<br>· Planning & Scheduling:- Establish baseline program to cover design, tendering process and authorities permitting.- Monitor the progress of all stages and report delay risks to the client and project team and adopt necessary mitigation measures.<br>· Documentation:- Maintain detailed project plans, timelines, and reports for stakeholders to track progress and outcomes.- Coordinate with stakeholders to ensure efficient implementation of the applicable document management systems.<br><br>· Budgeting and Estimating:- Assist in developing and managing project budgets, preparing estimates, and monitoring design scope for changes affecting budget and schedule. Coordinating with estimating teams to ensure accurate bidding documents.<br>· Client Communication:- Facilitate meetings and presentations, providing regular updates on project status, risks, and issues to stakeholders.- Maintain positive relationships with clients, providing regular updates on project progress and addressing any significant issues that may arise.<br>· Risk Management:- Identify potential risks and develop strategies to mitigate them, ensuring that projects are completed on time and within budget.- Maintain a live risk register with clear owners and mitigation measures.<br>· Value Engineering:- Lead value engineering efforts to enhance project value and reduce costs, presenting options and solutions to clients.<br>· Statutory Approvals:- Manage all government related permits, approvals and building code compliance for the project.<br><br>Skills:<br>· Leadership and efficient delegation.· Excellent written and spoken communication skills.· Technical proficiency and strong computer skills.· Ability to manage multiple projects simultaneously.· Extensive professional knowledge of design principles and engineering fundamentals.<br>Experience:Minimum of 5 years of proven career experience in KSA.<br>Qualifications:Bachelor’s degree in Design, Project Management, or a related field as a minimum.

<h3 >About the Opportunity</h3> <p >Abdullah A. Al-Barrak &amp; Son Co. is seeking a <strong >Lead Civil Structure Engineer</strong> to join their team in Al Khobar, Eastern Province. This full-time role involves leading the Civil/Structural discipline, with a primary focus on structural engineering. The position requires active participation in proposal and bidding processes, providing essential technical support during construction phases, and daily involvement in the engineering phase within an EPC (Engineering, Procurement, and Construction) project environment, potentially across single or multiple projects.</p> <h3 >Key Responsibilities</h3> <ul > <li >Plan, schedule, monitor, and control all engineering activities within the Civil/Structural discipline.</li> <li >Facilitate interdisciplinary coordination and support team building initiatives.</li> <li >Identify and communicate potential issues or problems to management for timely resolution.</li> <li >Actively participate in progress review, technical, client, and vendor meetings.</li> <li >Support Procurement activities, including raising Material Requisitions (MR), conducting Technical Bid Clarification/Evaluation (TBC/TBE), and preparing Draft Purchase Requisitions.</li> <li >Assist the bidding team by raising Requests for Quotation (RFQs), performing technical evaluation of bids, and preparing cost estimates.</li> <li >Provide construction support by responding to site-related technical queries (tQ).</li> <li >Review and provide comments on engineering deliverables as required.</li> <li >Ensure the safety and quality of all project deliverables.</li> <li >Participate in Value Engineering practices such as value engineering studies, lessons learned sessions, Risk Assessment/Management Studies and workshops, and Constructability studies and workshops.</li> <li >Contribute to customer satisfaction to enhance company reputation and facilitate repeat business.</li> </ul> <h3 >Required Qualifications</h3> <ul > <li >A Bachelor’s or Master’s degree in Civil Engineering, Structural Engineering, or a closely related discipline.</li> <li >A minimum of <strong >10 years of experience</strong> as a Civil Structure Lead.</li> <li >Demonstrated experience working on EPC (Engineering, Procurement, and Construction) projects.</li> </ul> <h3 >Core Competencies</h3> <ul > <li >Strong leadership and effective communication skills.</li> <li >Ability to foster and instill team spirit among colleagues.</li> <li >A proactive approach to learning from mistakes and continuous improvement.</li> <li >Proficiency in planning and execution, with a focus on punctuality, discipline, and adherence to timelines and schedules.</li> <li >Resourceful and presentable demeanor.</li> <li >Awareness of current industry developments and adaptability to change for collective benefit.</li> <li >Logical and analytical thinking capabilities.</li> <li >Adept at mentoring and open to sharing knowledge with team members.</li> </ul> <h3 >Technical Expertise</h3> <ul > <li >Comprehensive knowledge of Civil and Structural Discipline requirements within the Oil and Gas, Petrochemicals, Power, and Water Industries.</li> <li >Sound command of Saudi Aramco, SABIC, DEP, Royal Commission Standards, Codes and Practices, and HCISS Standards and Regulations.</li> <li >Proficiency in International Codes and Standards such as ACI, ASCE, IBC/UBC, ASTM, JIS, and CSA.</li> <li >Experience in the design and review of Reinforced Concrete and Structural Steel Systems, including equipment foundations, Pipe Racks, Platforms, buildings, pipe supports, and underground structures.</li> <li >Capability in dynamic foundation calculation and study for large rotating equipment (*, pumps, compressors), and structural analysis using STAAD Pro/STAAD Foundation.</li> <li >Expertise in Structural Analysis and Foundation Design for Tanks, Spheres, Columns, Reactors, Incinerators, and Flares.</li> <li >Ability to perform calculations for Oily water systems and subsequent detailed design.</li> <li >Experience in the design and review of Roads, Bridges, and Pipe Culverts.</li> <li >Skill in specifying and scoping for various surveys, including Topography, Geotechnical, Underground Ground Penetrating Radar (GPR), Underground Exploratory Excavation and Trenching, Logistics and Transportation Study, Traffic Study, and Environmental Impact Study.</li> <li >Competence in reviewing structural shop fabrication drawings and connection details.</li> <li >Sound knowledge of Piping, Mechanical, Electrical, and Instrumentation requirements for effective interdisciplinary interface and coordination.</li> <li >Active involvement in supporting designers in the development of 3D models using SP3D or equivalent software.</li> </ul> <h3 >Work Environment</h3> <p >This is a full-time position based in Al Khobar, Eastern Province. The role operates within a dynamic EPC project environment, requiring collaboration across multiple disciplines and projects.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Valleysoft is an IT services provider delivering enterprise technology solutions and support services to clients globally.<br> With experience spanning application development, process management, and systems integration, the company helps organizations design and deliver reliable technology solutions that support complex business needs.<br> In this role, you will shape integration solutions that connect business requirements with robust technical design.<br> You will work closely with cross-functional stakeholders to evaluate integration needs, define effective solution approaches, and support delivery from design through implementation.<br> This is an opportunity to contribute your expertise in enterprise integration while partnering with business, architecture, development, QA, and infrastructure teams on high-impact initiatives.<br> Responsibilities Attend business and technical meetings to gather and analyze business requirements.<br> Perform technical feasibility assessments and propose the optimal integration solution in alignment with the core team.<br> Prepare High-Level Design (HLD) and Low-Level Design (LLD) documents as per the defined standards.<br> Design secure, scalable, and high-performing integration solutions using IBM DataPower.<br> Provide technical guidance and support to development teams throughout the implementation lifecycle.<br> Collaborate with business, architects, development, QA, and infrastructure teams to ensure successful solution delivery.<br> Hands-on experience designing IBM DataPower integration solutions, including Multi-Protocol Gateway (MPGW), Web Service Proxy, and XML Firewall services.<br> Strong experience with XML, XSD, WSDL, SOAP, REST APIs, and XSLT.<br> Strong understanding of SOA, enterprise integration, and middleware concepts.<br> Solid understanding of integration security concepts, including OAuth, SSL/TLS, AAA, and certificate management.<br> Experience communicating with stakeholders and producing technical documentation.<br> Exposure to IBM API Connect or another API management platform is a plus.<br> Experience in the telecom domain is a plus.<br></span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 2+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

We are seeking a Track Design Engineer with a solid design background to extend PMC services for a major client in Saudi Arabia. The role focuses on leading and assuring track alignment design for rail projects, aligning multidisciplinary interfaces, and driving delivery to client standards. <br>Responsibilities<br>Support the Engineering Lead to review horizontal and vertical alignment design for mainline, depot, and yard tracks using industry-standard tools (e.g., Bentley Open Rail, Civil 3D, MX). Define and enforce geometric design criteria, alignment control parameters, and tolerances across project phases (concept, preliminary, detailed design). Conduct design checks, optioneering, and value engineering for alignments, turnouts, crossovers, and transition curves to optimize performance, maintainability, and cost. Ensure compliance with international and regional rail standards and client-specific requirements, integrating RAMS, maintainability, and ride quality considerations. Act as the integrated PMC representative to the client, coordinating multi-disciplinary interfaces (civil, structures, trackwork, OCS, signaling, drainage, utilities). Manage technical queries, change requests, and design approvals, maintaining clear audit trails and configuration control. Lead design risk management for alignment choices, including ground conditions, utilities, third-party constraints, and environmental factors. Oversee contractor and designer performance on alignment deliverables, ensuring baseline schedule and quality adherence. Maintain design schedules, registers, and progress reporting for alignment-related works. Prepare and present technical reports, design review comments, and decision logs to client stakeholders. Ensure constructability and staging are embedded in alignment design, supporting site teams during construction and responding to RFIs. Implement robust quality assurance processes, including independent design reviews and verification/validation activities. Align deliverables with KSA authority requirements and applicable standards; support permitting and approvals. Engage with stakeholders, authorities, and third parties to resolve constraints, protect corridors, and secure approvals.<br>Qualifications and Experience Bachelor’s degree in Civil Engineering or related discipline; Master’s preferred. Minimum 10 years of experience in railway track alignment and geometric design, including significant involvement in major rail programs. Proven experience in the KSA or GCC on rail design projects is strongly preferred; familiarity with KSA standards and authority processes is an advantage. Proficiency with rail alignment and civil design software (e.g., Open Rail/Open Roads, Civil 3D, MX, Power Rail Track) and with model/drawing production workflows (BIM preferred). Solid knowledge of track geometry principles (UIC/EN/AREMA as applicable), turnouts and special trackwork, transition curves, cant and cant deficiency, and alignment constraints in urban and high-speed/metro environments. Demonstrated experience managing multidisciplinary interfaces and performing PMC/consultancy functions with clients. Strong communication, report writing, and stakeholder management skills; ability to lead technical meetings and drive decisions. Experience with quality systems, risk management, and configuration control for design packages.

The Senior Signalling Engineer shall provide specialist technical leadership and hands-on engineering support for the design review, installation, testing, integration, commissioning and handover of the railway signalling systems for the Project. The role shall ensure that signalling works are safe, coordinated, constructible and compliant with the Employer’s Requirements, SAR standards, approved designs, applicable Transport General Authority requirements, relevant EN/UIC/CENELEC standards, the project programmer and quality requirements. The position will support the S&T Manager in integrating the new signaling system with the existing operational railway infrastructure, including the existing interlocking and VICOS interfaces, while coordinating closely with track, civil, electrical, telecommunications, systems assurance, operations and specialist vendors.<br>Key Responsibilities Provide senior technical support and day-to-day engineering leadership for all signaling activities from design through final handover. Review signaling designs, drawings, specifications, calculations, control tables, route tables, equipment schedules, cable schedules and interface documents for completeness, compliance and constructability. Coordinate signaling requirements with track geometry, turnouts, level crossings, civil works, structures, utilities, power supplies, telecommunications and operational railway constraints. Support the S&T Manager in planning resources, priorities, work fronts, technical submissions, long-lead items and signaling deliverables. Identify technical risks, design conflicts, interface gaps and site constraints; recommend and follow up mitigation measures. Provide technical guidance to signaling engineers, supervisors, technicians, subcontractors and system suppliers. Participate in coordination meetings with SAR, the Engineer, designers, vendors, Operations and Maintenance teams, and third-party contractors.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a <b>Content Designer</b> who is creative and intelligent, combining skills in crafting engaging narratives and sophisticated visual design. You will be responsible for transforming complex ideas and information into clear, attractive visual and written content that aligns with the brand's identity across various digital platforms (social media, website, advertising campaigns, and presentations).</p><p><b>Key Responsibilities:</b></p><p><b>Key Responsibilities:</b></p><ul><li><b>Content Development and Production:</b> Innovate and produce comprehensive visual and written content (designs, infographics, posts, short videos/Reels, and stories) for social media platforms and the website.</li><li><b>User Experience (UX Writing):</b> Write and craft text within interfaces and applications (Microcopy) to ensure a seamless and understandable user experience.</li><li><b>Brand Identity Maintenance:</b> Adhere to the brand's tone of voice and visual guidelines in all outputs.</li><li><b>Planning and Collaboration:</b> Work closely with the marketing team, interface developers, and product managers to translate marketing objectives into effective designs and content.</li><li><b>Performance Analysis:</b> Monitor audience interaction with the designed content and analyze it to develop future designs and texts based on data.</li><li><b>Simplifying Information:</b> Transform complex statistical data and reports into simplified and attractive infographics.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Technical Skills:</b></p><ul><li>Proficiency in essential design software: <b>Adobe Photoshop, Illustrator, Figma, Canva</b>.</li><li>Basic knowledge of video editing and graphic animation software (such as Adobe Premiere / After Effects) is a plus.</li></ul><p><b>Language and Writing Skills:</b> Crafting creative texts in Arabic (and English if required) free from spelling and grammatical errors.</p></div>

<h3 >About Egis</h3> <p >Egis is an international firm active in architecture, consulting, construction engineering, and mobility services, with operations spanning 100 countries. In the Middle East, Egis employs 3,500 professionals across 8 countries, having successfully delivered over 700 complex development projects that stimulate economic growth and enhance quality of life in the region.</p> <h3 >The Role: MEP Design Lead Mechanical</h3> <p >Egis is seeking an experienced <strong >MEP Design Lead Mechanical</strong> to join its dynamic engineering team in Jeddah, Saudi Arabia, within the Makkah region. This full-time leadership position requires 5-10 years of experience and involves overseeing the mechanical design aspects of critical airport infrastructure projects. The role ensures compliance with international standards and Saudi Building Code requirements, leading a team of mechanical engineers and designers, and driving innovation and excellence in MEP system design while managing complex coordination across multiple disciplines.</p> <h3 >Key Responsibilities</h3> <ul > <li >Lead and mentor a team of mechanical engineers and design professionals on airport and aviation facility projects.</li> <li >Develop comprehensive mechanical design solutions for HVAC, plumbing, fire protection, and related systems in airport environments.</li> <li >Manage the mechanical design phase from concept through construction documentation.</li> <li >Coordinate with architects, electrical engineers, and other disciplines to ensure seamless system integration and clash-free designs.</li> <li >Utilize BIM and advanced design software to create detailed mechanical models and construction documents.</li> <li >Ensure all designs comply with Saudi Building Code, international standards, and airport-specific requirements.</li> <li >Conduct design reviews and quality assurance checks to maintain high standards of accuracy and completeness.</li> <li >Prepare technical specifications, calculations, and design reports for airport projects.</li> <li >Collaborate with clients, consultants, and contractors to address design challenges and implement solutions.</li> <li >Monitor project timelines and budgets while maintaining design excellence.</li> <li >Stay current with industry best practices and emerging technologies in MEP design.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >5-10 years of experience in MEP design, with a focus on mechanical systems.</li> <li >Advanced proficiency in MEP design software.</li> <li >Comprehensive knowledge of mechanical systems.</li> <li >Strong understanding of Saudi Building Code and international design standards.</li> <li >Expertise in BIM modeling and coordination.</li> <li >Project management experience.</li> <li >Familiarity with airport-specific mechanical requirements.</li> </ul> <h3 >Essential Skills and Competencies</h3> <ul > <li >Excellent analytical and problem-solving skills.</li> <li >Strong communication and interpersonal skills.</li> <li >Demonstrated leadership and mentoring capabilities.</li> </ul> <h3 >Work Location and Type</h3> <p >This is a full-time position based in Jeddah, Saudi Arabia, within the Makkah region. The role involves working on significant airport infrastructure projects.</p>

Senior Site Architect – High-End Finishes & Fit-Out Location: Riyadh, Saudi Arabia Employment Type: Full-time | On-site Required Experience: At least 5 years of relevant architectural site execution experience, including at least 3 years within Saudi Arabia. Availability: Immediate joining required. Applicants must currently be based in Saudi Arabia. ABOUT THE ROLEQWAED AL-EMMAR (QAE) is seeking a Senior Site Architect to lead the execution of architectural works, high-end finishes, and interior fit-out, with experience supervising façades and coordinating external works. This site-based contracting role involves daily work planning, subcontractor supervision, quality inspections, multidisciplinary coordination, safety oversight, and handover. Candidates must have proven site execution experience on large-scale hospitality, commercial, and residential projects. ARCHITECTURAL AND FINISHING WORKSSupervise execution and inspect workmanship across the following packages, as applicable to the project:Masonry, plastering, rendering, and substrate preparation. Gypsum board ceilings, partitions and linings, suspended ceilings, and decorative gypsum works. Marble, natural stone, porcelain, ceramic tiles, and mosaics. Timber flooring, parquet, vinyl, carpets, and epoxy flooring. Painting, putty, decorative coatings, wallcoverings, and wallpaper. Architectural joinery and fixed furniture, including doors, wardrobes, wall panelling, counters, vanity units, and associated hardware. Glass, mirrors, aluminium works, decorative metalwork, and balustrades. Waterproofing to wet areas, roofs, and planters, together with joint sealing and interfaces with finishes. Glazed façades and curtain walls, including Stick and Unitized systems and Structural Silicone Glazing. Aluminium windows and doors, including thermally broken, hinged, and sliding systems, storefront glazing, glazed partitions, and skylights. External cladding, including mechanically fixed stone, metal panels, solid and composite aluminium panels, GRC/GFRC, louvers, and sunshades. Hardscape works, including paving, interlock, kerbs, walkways, plazas, external steps, ramps, and decking. Planters, pergolas, canopies, boundary walls, fences, gates, and outdoor furniture. Coordination of softscape, irrigation, external lighting, and drainage with specialist contractors. Architectural finishes and waterproofing interfaces for swimming pools and water features, where applicable. Installation coordination of Furniture, Fixtures & Equipment (FF&E), sanitary fixtures and bathroom accessories, decorative lighting, curtains, and furnishings. KEY RESPONSIBILITIESLead daily site activities, organise work fronts, and supervise subcontractors, foremen, and site teams. Plan work sequences and verify the availability of approved drawings, materials, manpower, access, and suitable site conditions. Review shop drawings, specifications, material approvals, and samples before execution; raise technical queries and resolve issues with the technical office and relevant disciplines. Coordinate architectural, structural, MEP, façade, and external works, ensuring concealed services and required inspections are completed before closure. Personally inspect materials and workmanship against approved requirements, checking dimensions, levels, alignment, joints, interfaces, finish consistency, and installation quality. Apply approved method statements and inspection and test plans; document defects and non-conformances and verify corrective work. Prepare material and work inspection requests, attend consultant inspections, and close observations. Supervise mock-ups and model rooms and maintain approved quality standards throughout subsequent execution. Follow up on façade installation, specialist drawings, material approvals, and required testing with specialist subcontractors. Coordinate deliveries, storage, installation readiness, FF&E interfaces, and protection of completed works. Prepare short-term work plans and progress reports covering quantities, manpower, productivity, constraints, and recovery actions. Monitor material usage, minimise waste and rework, and manage snagging and final handover. Record approved site changes and provide verified information for as-built drawings and handover documents. Monitor safety and occupational health requirements within the assigned scope, brief workers on task-related risks, and enforce appropriate PPE, housekeeping, safe access, and safe working practices. Identify hazards, stop unsafe activities, and report issues to project management for corrective action. REQUIRED QUALIFICATIONS AND EXPERIENCEBachelor’s degree in Architecture or Architectural Engineering. At least 5 years of architectural site execution and finishing experience, including at least 3 years within Saudi Arabia. Proven hands-on experience in high-end finishes and interior fit-out on large-scale hospitality, commercial, and residential projects. Ability to supervise subcontractors and site teams and manage activities through inspection and completion. Strong practical knowledge of finishing materials, installation methods, gypsum systems, joinery, stonework, waterproofing, and workmanship standards used in Saudi Arabia. Experience supervising façade, glazing, and aluminium installation and coordinating specialist subcontractors. Ability to interpret architectural, structural, and MEP drawings and resolve site interfaces. Ability to independently inspect materials and workmanship, identify defects, and follow corrective actions through to closure. Experience with consultant inspections, mock-ups, snagging, and handover. Working knowledge of FF&E installation and coordination. Familiarity with Saudi Building Code requirements and specifications relevant to the architectural scope. Practical knowledge of site safety and occupational health requirements and the ability to direct safe working practices. Proficiency in Auto CAD and Excel, with the ability to prepare site reports and technical correspondence in English. Strong leadership, attention to detail, follow-up, problem-solving, and deadline management. Currently based in Saudi Arabia and available for immediate joining and full-time site work in Riyadh. PREFERRED QUALIFICATIONSExperience with luxury hotels, model rooms, hotel operator standards, and complex interior finishes. Experience delivering finishing packages from substrate preparation through final handover. Experience in hardscape and coordination of softscape, irrigation, and external works. Familiarity with Revit and Navisworks for model review and coordination. Relevant training in construction quality inspection or occupational health and safety. HOW TO APPLYCandidates who meet all essential requirements are invited to email their application to:hr@aljammaz-co.comEmail subject:Senior Site Architect – Full Name – Current City Required attachments:Updated CV: Include employers, employment dates, and relevant Saudi Arabia experience. Project portfolio: A concise PDF showing completed works and, where available, execution stages, mock-ups, and finishing details. Identify your personal responsibilities. Project list: Include names, locations, project types, approximate scale, work packages, and stages personally handled. This may be included in your CV or portfolio. Please answer the following questions in the email body:What is your current city, and are you available for full-time site work in Riyadh? How many years of architectural site execution experience do you have in total, and how many were within Saudi Arabia? How many years of hands-on experience do you have in high-end finishes and fit-out? Which hospitality, commercial, and residential projects have you worked on, and what were your responsibilities? Which finishing packages have you directly supervised, and what teams or subcontractors have you managed? What façade, glazing, aluminium, and landscape systems or works have you supervised? State your inspection and handover responsibilities. Describe a finishing defect or coordination issue you resolved and how you verified the result. What experience do you have in material and workmanship inspections, consultant inspections, and snag closure? What FF&E responsibilities have you handled? What practical experience or training do you have in site safety and occupational health? What is your proficiency in Auto CAD and Excel, and your familiarity with Revit and Navisworks? Why are you seeking a new opportunity, or why did you leave your most recent employer? How many calendar days do you need to join after accepting an employment offer? Enter “0” if available immediately and state any notice period or procedures affecting your start date. What is your expected total monthly salary in SAR, including basic salary and all fixed allowances, excluding variable bonuses? PROFESSIONAL REFERENCESFinal-stage candidates will be asked to provide two professional references, with a third if available, preferably former direct managers or project managers. Provide each reference’s name, job title, organisation and project where you worked together, professional relationship, and telephone number and/or work email, after obtaining their permission to share these details. References will be contacted with the candidate’s prior consent. A current employer will not be contacted without explicit permission. SELECTION PROCESSShortlisted candidates will discuss their site responsibilities and portfolio. Assessment may include a short practical scenario covering execution, quality inspection, coordination, work sequencing, or safety. Work samples and photographs must be permitted for sharing and exclude confidential project information. Redacted samples are acceptable.

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركة دلتا للتسويق عن <strong >مهندس كهربائي تقني</strong> للانضمام إلى فريقها في جدة، مكة المكرمة. هذا الدور بدوام كامل ومناسب للمرشحين ذوي الخبرة من 0 إلى 1 سنة. يتضمن الدور دراسة التصاميم والمخططات الكهربائية للمشاريع، وتنفيذ برامج تشغيل المعدات، وتشخيص الأعطال ومتابعة إجراءات الإصلاح والمعالجة، بالإضافة إلى إعداد التقارير الفنية المتخصصة.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >دراسة التصاميم والمخططات الكهربائية لمشاريع وأعمال الهندسة الكهربائية بالتنسيق المباشر مع المهندس الكهربائي المصمم.</li> <li >إعداد جداول الكميات اللازمة للمشاريع ومتابعة مراحل التنفيذ.</li> <li >تنفيذ برامج تشغيل الأنظمة والمعدات الكهربائية بما يتوافق مع متطلبات العمل والمشاريع الصناعية.</li> <li >تشخيص أعطال الأجهزة والمعدات والشبكات الكهربائية بدقة.</li> <li >متابعة إجراءات الإصلاح والصيانة والمعالجة لضمان استمرارية وكفاءة الأداء.</li> <li >تنفيذ برامج الصيانة الوقائية للأجهزة والمعدات والشبكات الكهربائية بناءً على توصيات الشركة الصانعة والتعليمات الفنية.</li> </ul> <h3 >تطوير العمل والتوثيق</h3> <ul > <li >تطوير أساليب وإجراءات العمل الحالية ومواكبة أحدث التطورات التقنية في مجال الهندسة الكهربائية.</li> <li >إعداد الوثائق والتقارير المتخصصة التي توضح نتائج الدراسات والتحاليل الفنية.</li> <li >المشاركة في عرض هذه الوثائق والتقارير وتوضيحها ومناقشتها مع الأطراف المعنية.</li> <li >العمل على حفظ الوثائق والتقارير في قاعدة البيانات المخصصة لها وفقاً للسياسات والإجراءات المعتمدة في الشركة.</li> </ul> <h3 >المتطلبات والخبرة</h3> <p >يتطلب هذا الدور خبرة عملية تتراوح من <strong >0 إلى 1 سنة</strong> في مجال الهندسة الكهربائية أو ما يعادلها. يجب أن يكون المرشح قادراً على فهم التصاميم والمخططات الكهربائية الأساسية، ولديه القدرة على تطبيق المعرفة التقنية في بيئة العمل.</p> <h3 >بيئة العمل</h3> <p >يعمل المهندس الكهربائي التقني ضمن فريق شركة دلتا للتسويق في مدينة جدة، مكة المكرمة. الوظيفة بدوام كامل وتتطلب التنسيق المستمر مع المهندسين المصممين وفرق التنفيذ لضمان سير العمل بكفاءة وفعالية.</p> <h3 >عملية التقديم</h3> <p >ندعو المرشحين المهتمين والذين يستوفون المتطلبات المذكورة للتقديم على هذا الدور. سيتم مراجعة جميع الطلبات والتواصل مع المرشحين المؤهلين لمتابعة إجراءات التوظيف.</p></div>

We are seeking an experienced Senior Irrigation Engineer to lead the design, planning, and optimization of irrigation systems for large-scale landscaping and infrastructure projects. This role requires strong technical expertise, leadership capabilities, and the ability to drive efficient and sustainable irrigation solutions from concept through execution.<br>Key Responsibilities<br>Lead the design and development of advanced irrigation systems (drip, sprinkler, subsurface) for complex projects Perform and review hydraulic calculations, including pipe sizing, pressure zoning, and system optimization Oversee preparation of irrigation layouts, detailed drawings, and design documentation Review and approve shop drawings, material submittals, and technical specifications Coordinate closely with landscape architects, civil engineers, and other disciplines to ensure seamless integration Manage design coordination meetings and resolve multidisciplinary clashes Ensure compliance with project requirements, local regulations, and sustainability standards Provide technical guidance and mentorship to junior engineers and designers Support project teams during tendering, estimation, and value engineering stages Evaluate new technologies, materials, and suppliers to improve system efficiency and cost-effectiveness Conduct site visits to support installation, testing, and commissioning of irrigation systems Identify risks and propose technical solutions to ensure timely project delivery<br>Requirements<br>Bachelor’s degree in Agricultural Engineering, Irrigation Engineering, or related field8–12 years of experience in irrigation design, preferably within landscaping projects Strong proficiency in Auto CAD, Civil 3D, and Rain CADProven experience in large-scale landscape or infrastructure projects Experience in GCC projects is a strong advantage

<h3 >About the Role</h3> <p >Amadeus is seeking a <strong >Lead UX/UI Designer</strong> to define, drive, and continuously enhance the end-to-end customer experience within a complex digital ecosystem. This full-time role, based in Makkah or Jeddah, focuses on integrating user experience, customer journey consistency, and conversion performance into solution design and delivery. The ideal candidate will have 5-10 years of experience and will take a hands-on approach to shaping user journeys and optimizing digital touchpoints.</p> <h3 >Core Responsibilities</h3> <p >The Lead UX/UI Designer will contribute to broader business objectives and serve as a reference for less experienced colleagues, supporting their growth. This role involves influencing decisions, anticipating dependencies in complex scenarios, and taking ownership of commitments.</p> <ul > <li >Define and drive the end-to-end user experience vision across digital touchpoints, ensuring consistency, usability, and alignment with business and user needs.</li> <li >Collaborate with stakeholders to understand user needs, expectations, and pain points across the customer journey.</li> <li >Translate business goals into clear UX, CX, and CRO strategies to improve engagement, satisfaction, and conversion outcomes.</li> <li >Act as a key reference for experience-related topics, promoting best practices and consistency across teams.</li> </ul> <h3 >UX Research and Design Leadership</h3> <ul > <li >Plan and conduct user research activities, including interviews, usability testing, and surveys, to generate actionable insights into user behaviors and needs.</li> <li >Stay informed about UX trends, industry practices in travel and digital ecosystems, and emerging interaction patterns.</li> <li >Define and communicate clear UX direction for digital touchpoints, proposing strategic recommendations that balance user needs, business goals, and technical constraints.</li> <li >Build and maintain a shared knowledge base of user insights to support product and experience decisions.</li> <li >Design and refine customer journeys, user flows, and interaction models to deliver intuitive and seamless experiences.</li> <li >Contribute to UX design activities, including wireframes, prototypes, and experience concepts, when needed.</li> <li >Work closely with product and engineering teams to ensure alignment between user experience, business objectives, and technical feasibility.</li> <li >Validate and improve experience quality through iterative testing, user feedback, and continuous improvement practices.</li> </ul> <h3 >Conversion Optimization and Performance</h3> <ul > <li >Define and track key performance indicators related to user experience and conversion (*, engagement, drop-off, conversion rates).</li> <li >Identify opportunities to improve customer journeys and overall digital performance.</li> <li >Design and support experimentation activities such as A/B testing and usability testing to validate improvements.</li> <li >Utilize data and insights to continuously improve user experience and business outcomes.</li> </ul> <h3 >Experience Governance and Collaboration</h3> <ul > <li >Ensure a consistent and high-quality user experience across products, channels, and digital touchpoints.</li> <li >Collaborate with designers, developers, and architects to maintain and evolve UX standards and guidelines.</li> <li >Encourage the use of reusable design patterns and scalable experience solutions.</li> <li >Identify potential UX risks early and support mitigation strategies to maintain experience quality.</li> <li >Foster a strong user-centric mindset by promoting design thinking and experience-driven decision-making.</li> <li >Communicate UX priorities, insights, and improvement opportunities clearly across all relevant stakeholders.</li> </ul> <h3 >Qualifications and Requirements</h3> <ul > <li >Proven experience (5-10 years) in UX, customer experience, web optimization, or digital product design.</li> <li >Ability to conduct and interpret user research and translate insights into meaningful design improvements.</li> <li >Experience with prototyping, journey mapping, and usability testing.</li> <li >Familiarity with experimentation methods such as A/B testing or usability studies.</li> <li >Strong collaboration, communication, and problem-solving skills.</li> <li >Data-driven mindset with the ability to work with analytics and performance insights.</li> <li >Experience in travel, e-commerce, or similar industries is a plus.</li> </ul>

We are seeking a talented and customer-focused Remote Creative Designer to join our team. In this role, you will bridge artistic creativity with client consultation—understanding client needs, providing expert design advice, and translating concepts into production-ready designs for custom neon signs, promotional signages, and commercial print materials.<br>Key Responsibilities:Consult directly with clients remotely to understand their visions, requirements, and brand identity. Provide expert design recommendations and tailored creative solutions to clients. Conceptualize and produce eye-catching, custom designs for neon signages, outdoor/indoor advertising boards, and promotional print collateral. Prepare precise, production-ready artwork files optimized for manufacturing, cutting, and large-format printing. Manage revisions efficiently and collaborate closely with clients to deliver final outputs that exceed expectations.<br>Qualifications & Skills:Proven experience in graphic design with a strong portfolio showcasing neon signs, advertising boards, and print media. Proficiency in industry-standard design software (e.g., Adobe Illustrator, Photoshop). Strong client communication and consulting skills with an ability to interpret brief requirements clearly. Knowledge of materials, production measurements, and print/fabrication prepress setups. Self-motivated with excellent time management skills to operate independently in a remote setting. Reliable workstation and stable high-speed internet connection.<br>Perks & Benefits:100% remote flexibility—work from anywhere. Dynamic, supportive, and creative environment. Competitive compensation based on skills and portfolio experience.