Inspection Engineer Jobs in Saudi

<h3 >About the Role</h3> <p >ABIS is seeking a <strong >QC Inspector – Insulation – Project</strong> to join their team. This full-time role involves performing inspection and testing of thermal/mechanical insulation and cladding installation activities to ensure compliance with project drawings, specifications, and applicable standards.</p> <h3 >Key Responsibilities</h3> <ul > <li >Perform in-process and final inspections on insulation and cladding installation works.</li> <li >Verify insulation material, thickness, and installation methods against approved specifications.</li> <li >Witness moisture barrier, banding, and cladding installation checks according to the Inspection and Test Plan (ITP).</li> <li >Verify materials and batch certificates against approved specifications.</li> <li >Record inspection results and raise Non-Conformance Reports (NCRs) as required.</li> <li >Coordinate hold points and inspections with client and third-party inspectors.</li> <li >Maintain inspection records, checklists, and daily Quality Control (QC) reports.</li> <li >Verify the calibration status of measuring and test equipment used on site.</li> <li >Support punch-list generation and verification of closure for insulation works.</li> <li >Ensure work fronts comply with approved method statements and insulation standards.</li> <li >Support the preparation of quality documentation for insulation handover dossiers.</li> </ul> <h3 >Performance Indicators</h3> <p >Performance in this role will be evaluated based on the following criteria:</p> <ul > <li >Accuracy and completeness of inspections.</li> <li >Timely identification and reporting of non-conformances.</li> <li >First-time inspection pass rate on assigned work fronts.</li> <li >Adherence to inspection schedules and hold points.</li> <li >Quality of inspection documentation.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of <strong >5 to 8 years of experience</strong> as a QC Inspector on insulation/cladding application projects.</li> <li >A Diploma or Bachelor's degree in Mechanical Engineering is required.</li> <li >QC/inspection certification is preferred.</li> </ul> <h3 >Application Process</h3> <p >Interested candidates are encouraged to apply for this full-time position. The salary for this role will be discussed during the interview process.</p>

Job Overview The Procurement Quality Control Supervisor (PQCS) is responsible for ensuring that all procured materials, equipment, and services comply with project specifications, client requirements, applicable codes, and company quality standards. The role oversees supplier quality performance, inspection activities, material approvals, and quality documentation to ensure only compliant products are delivered to projects.<br>Roles & Responsibilities· Supervise procurement quality control activities to ensure compliance with project specifications, client requirements, and company quality standards.· Review material requisitions, purchase orders, technical specifications, and vendor documentation for quality compliance.· Coordinate with Procurement, Engineering, QA/QC, Warehouse, and Project teams to ensure quality requirements are clearly communicated and implemented.· Evaluate supplier quality documentation, including material certificates, inspection reports, test certificates, and compliance records.· Coordinate supplier inspections, factory acceptance tests (FAT), and third-party inspections when required.· Verify that procured materials and equipment meet approved specifications, standards, and contractual requirements before delivery.· Monitor supplier performance and maintain supplier quality records, inspection status, and non-conformance reports (NCRs).· Identify quality issues related to purchased materials and coordinate corrective and preventive actions with suppliers.· Ensure all procurement quality documents are complete, accurate, and properly maintained for audit and project records.· Coordinate material receiving inspections and resolve quality-related discrepancies with suppliers and internal stakeholders.· Prepare procurement quality reports, inspection summaries, supplier performance evaluations, and quality metrics for management.· Support internal and external audits by providing procurement quality documentation and records.· Ensure compliance with the company's Quality Management System (QMS), procurement procedures, and applicable international standards.· Identify opportunities to improve supplier quality, procurement processes, and quality control procedures.· Perform other procurement quality assurance and quality control duties as assigned. Qualifications · Diploma or Bachelor's degree in Engineering, Supply Chain Management, Procurement, Quality Management, Industrial Engineering, or a related field.· Minimum of 5 years of experience in Procurement Quality Control, Supplier Quality, Quality Assurance, Procurement, or a similar role.· Experience in construction, engineering, manufacturing, oil & gas, industrial, or EPC projects is preferred.· Strong knowledge of procurement processes, material inspection requirements, and supplier quality management.· Familiarity with international standards, material certification requirements, and inspection procedures.· Knowledge of ISO 9001 Quality Management Systems and quality documentation requirements.· Proficiency in Microsoft Office Suite (Word, Excel, Outlook, and Power Point).· Experience using ERP systems (SAP, Oracle, Microsoft Dynamics, or equivalent) and Electronic Document Management Systems (EDMS) is an advantage.· Strong analytical, organizational, and problem-solving skills.· Excellent written and verbal communication skills.· Ability to evaluate technical documents, supplier documentation, and inspection records.· Ability to work independently and manage multiple priorities in a fast-paced environment.· High attention to detail and commitment to quality, compliance, and continuous improvement.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Summary: The QC Manager is responsible for establishing and managing the project quality control system, ensuring all piping, civil, and mechanical works meet contractual, code, and specification requirements through inspection, testing, and non-conformance management.<br> Duties &amp; Responsibilities: Develop and implement the project Quality Control Plan and Inspection &amp; Test Plans (ITPs).<br> Manage and supervise QC Inspectors across the piping, civil, and mechanical disciplines.<br> Ensure inspections, tests, and hold points are executed per approved ITPs and specifications.<br> Review and approve inspection reports, NDE reports, and material certificates.<br> Manage the Non-Conformance Report (NCR) process, including root cause and corrective action.<br> Coordinate third-party inspection, client inspection, and certification activities.<br> Ensure calibration and control of inspection and test equipment.<br> Conduct internal quality audits and site quality walkdowns.<br> Compile quality documentation for final dossiers and project handover.<br> Liaise with client/consultant QA/QC representatives on quality matters.<br> Provide quality performance reporting to project management.<br> Support training and awareness of QC requirements across site teams.<br> Experience: +10 years of experience in quality control/assurance on EPC or industrial construction projects, including supervisory experience.<br> Education: Bachelor's degree in Engineering (Mechanical/Civil) or a related field.<br> Certified Welding Inspector (CWI) or equivalent QC certification preferred.<br> Required Skills &amp; Abilities: 1- Core Competencies: Attention to Detail Analytical Thinking Integrity Communication Skills Decision Making Leadership 2- Technical Skills: Quality Management Systems (ISO 9001) Welding &amp; NDE Standards (ASME, API, etc.<br>) Piping &amp; Civil Inspection Techniques Inspection &amp; Test Plan (ITP) Development NCR &amp; Corrective Action Management Reading Technical Drawings &amp; Specifications</span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>Supervise and coordinate QA/QC activities for the fabrication, assembly, inspection, repair, refurbishment, and testing of Top Drive, Catwalk, Casing Drive Systems, and other drilling equipment. Ensure receiving, in-process, final inspections, and Factory Acceptance Tests (FAT) are performed in accordance with approved drawings, specifications, Inspection and Test Plans (ITPs), procedures, and applicable industry standards. Assign and monitor daily inspection activities, provide technical guidance to QA/QC Inspectors, review inspection results, and ensure timely completion of assigned quality activities. Review WPS, PQR, welder qualifications, material certificates, and related welding documentation. Ensure welding, fabrication, NDT, dimensional inspection, and associated activities comply with approved requirements and applicable codes and standards. Review and coordinate Non-Conformance Reports (NCR), support root cause investigations and corrective actions, and verify implementation of approved dispositions. Escalate significant or recurring quality issues to Quality Management and Engineering as required. Coordinate supplier inspections, surveillance, first article inspections, audits, and qualification activities. Monitor supplier quality performance and support supplier development and corrective action activities. Coordinate with Engineering on material substitutions, deviations, concessions, repair dispositions, and technical clarifications. Ensure approved dispositions and technical requirements are properly implemented and documented. Review and verify inspection reports, Inspection Release Notes (IRN), FAT records, NDT reports, material certificates, data books, Certificates of Conformance, and other quality documentation prior to product or equipment release. Ensure measuring, inspection, and test equipment used by the QA/QC team is suitable for the intended application, available when required, properly maintained, calibrated, and within its valid calibration period. Ensure QA/QC activities are performed in accordance with the company Quality Management System, API Q1 requirements, applicable API specifications, internal procedures, engineering requirements, and customer specifications. Support and participate in internal, customer, supplier, and API audits. Coordinate preparation and verification of relevant quality records, address assigned audit findings, and monitor corrective actions through closure. Provide QA/QC support for equipment repair, overhaul, servicing, field activities, aftermarket operations, warranty issues, and other quality-related matters involving drilling equipment and associated components. Monitor inspection status, NCRs, supplier quality performance, corrective actions, quality issues, and assigned quality KPIs. Provide regular reports and updates to Quality Management. Identify opportunities to improve inspection practices, documentation, supplier performance, product quality, and QA/QC processes. Support lessons learned, corrective actions, and continuous improvement initiatives. Exercise appropriate authority within the assigned QA/QC scope to accept or reject work based on approved requirements, stop nonconforming work when necessary, initiate NCRs, and escalate unresolved or critical quality issues to the appropriate authority. Perform assigned duties in accordance with the company s policies, procedures, Quality Management System requirements, and established quality objectives. Exercise the necessary authority to make decisions within the defined scope of work, escalate issues as required, and collaborate with Engineering, Operations, Supply Chain, Aftermarket, Sales, vendors, and other relevant stakeholders to ensure operational effectiveness. Be accountable for the quality, accuracy, and timeliness of assigned work and for reporting any nonconformities, risks, or concerns that may impact quality, legal or regulatory compliance, safety, environmental performance, or customer satisfaction. Support and participate in achieving the organization s Quality, Health, Safety, and Environment (QHSE) objectives and continuous improvement initiatives. Perform other duties and responsibilities as assigned.</p><p><strong>Desired Candidate Profile</strong></p><h4>QUALIFICATIONS</h4> Bachelor s degree or Diploma in Mechanical Engineering, Welding Engineering, Manufacturing, or a related technical discipline. Relevant certification in Welding Inspection, NDT, Quality Management, or API-related disciplines is preferred. Knowledge of API Q1, applicable API product specifications, AWS/ASME requirements, and ISO 9001 principles is preferred. <h4>SKILLS REQUIREMENTS</h4> Strong knowledge of fabrication, welding, machining, assembly, inspection, testing, and repair of drilling equipment. Ability to review engineering drawings, specifications, WPS/PQR, material certificates, NDT reports, ITPs, and quality documentation. Good understanding of NCR, root cause analysis, corrective actions, supplier quality, and deviation control processes. Strong leadership and supervisory skills with the ability to guide QA/QC Inspectors and coordinate quality activities. Good communication and coordination skills for working with Engineering, Operations, Supply Chain, vendors, customers, and other stakeholders. Proficient in technical reporting, documentation, and standard Microsoft Office applications. Ability to make sound quality decisions, prioritize activities, and escalate critical quality issues when required. <h4>EXPERIENCE LEVEL</h4> Minimum 7 10 years of relevant QA/QC experience in manufacturing, fabrication, repair, or servicing of oilfield, drilling, or heavy mechanical equipment. Minimum 2 3 years of supervisory or team-lead experience in a QA/QC environment is preferred. Hands-on experience with welding inspection, dimensional inspection, material verification, NDT coordination, FAT, supplier inspection, and quality documentation. Experience working in an OEM, oilfield equipment manufacturer, drilling equipment, or similar heavy-engineering environment is highly preferred. Experience supporting API Q1 audits, supplier audits, customer inspections, NCR investigations, and corrective action activities is preferred.

About the Role:We are seeking a qualified Mechanical QC Inspector to join our team on an urgent basis for a high-priority infrastructure project. The ideal candidate will have solid experience in inspection and quality control of mechanical systems, particularly piping networks and HVAC systems. Key Responsibilities:Conduct material receiving inspections for wet utilities. Perform site inspections for installation works related to piping and HVAC/DCP systems. Ensure compliance with project specifications, standards, and approved drawings. Monitor testing and commissioning activities for metallic and non-metallic piping systems. Identify non-conformities and ensure proper corrective actions are implemented. Maintain accurate inspection records and reports. Coordinate with the QA/QC team, consultants, and contractors to ensure quality standards are met. Requirements:Diploma or Bachelor's Degree in Mechanical Engineering. Minimum 6 years of relevant experience in infrastructure construction projects. Hands-on experience in metallic & non-metallic piping systems, HVAC/DCP networks, and mechanical testing & inspection procedures. Previous experience on infrastructure projects (roads, utilities, wet utilities, or similar) is mandatory. Aramco Approval/Approval Profile or NEOM Approval/Profile is highly preferred. Good understanding of quality standards and inspection processes. Ability to work under pressure in urgent project environments.

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About the Role</h3> <p style="margin:0 0 12px; **********<strong>;">ABIS is seeking a <strong style="font-weight:700;">QC Inspector - Mechanical - Project</strong> to join our team. This full-time role involves performing comprehensive inspection and testing of mechanical equipment installation activities to ensure strict compliance with project drawings, specifications, and all applicable codes and standards. The position requires 5-10 years of relevant experience.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Conduct in-process and final inspections on mechanical equipment installation works, including pumps, vessels, packages, and structural skids.</li> <li style="margin:0 0 6px;">Verify equipment installation, alignment, and grouting against approved drawings and vendor specifications.</li> <li style="margin:0 0 6px;">Witness mechanical running tests, alignment checks, and equipment box-up activities in accordance with the Inspection and Test Plan (ITP).</li> <li style="margin:0 0 6px;">Verify materials and equipment against material certificates, vendor data, and project specifications.</li> <li style="margin:0 0 6px;">Record inspection results accurately and raise Non-Conformance Reports (NCRs) as required.</li> <li style="margin:0 0 6px;">Coordinate hold points and inspections effectively with client and third-party inspectors.</li> <li style="margin:0 0 6px;">Maintain detailed inspection records, checklists, and daily Quality Control (QC) reports.</li> <li style="margin:0 0 6px;">Verify the calibration status of all measuring and test equipment utilized on site.</li> <li style="margin:0 0 6px;">Support the generation of punch-lists and verify the closure of identified items for mechanical works.</li> <li style="margin:0 0 6px;">Ensure all work fronts comply with approved method statements and mechanical equipment standards.</li> <li style="margin:0 0 6px;">Support the preparation of quality documentation for mechanical handover dossiers.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Performance Evaluation</h3> <p style="margin:0 0 12px; </strong>********<strong>;">Performance in this role will be evaluated based on several key indicators, ensuring high standards of quality and efficiency in all inspection activities.</p> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Accuracy and completeness of inspections.</li> <li style="margin:0 0 6px;">Timely identification and reporting of non-conformances.</li> <li style="margin:0 0 6px;">First-time inspection pass rate on assigned work fronts.</li> <li style="margin:0 0 6px;">Adherence to inspection schedules and hold points.</li> <li style="margin:0 0 6px;">Quality of inspection documentation.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Qualifications and Experience</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">A minimum of 5 to 10 years of experience in mechanical quality control inspection, preferably within project environments.</li> <li style="margin:0 0 6px;">Demonstrated ability to interpret engineering drawings, specifications, and relevant industry codes and standards.</li> <li style="margin:0 0 6px;">Proficiency in performing inspections for mechanical equipment installations, including alignment and grouting.</li> <li style="margin:0 0 6px;">Experience with mechanical running tests and material verification processes.</li> <li style="margin:0 0 6px;">Strong understanding of quality documentation and reporting procedures, including NCRs.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Work Type</h3> <p style="margin:0 0 12px; </strong>********<strong>;">This is a full-time position with ABIS.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Application Process</h3> <p style="margin:0 0 12px; </strong>**********;">Interested candidates who meet the specified requirements are encouraged to apply.</p>

<p>JASARA PMC operates in the civil engineering sector with a focus on MEP inspections and project quality. The team supports complex construction work by helping ensure installed systems meet project requirements, regulatory expectations, and approved technical standards. This is an opportunity to contribute to work where precision, accountability, and close coordination across site teams are essential. As a Senior Inspections Specialist, you will play an important role in maintaining inspection quality across MEP works and supporting successful project delivery. You will work closely with contractors and project stakeholders to help ensure installations are properly reviewed, issues are identified early, and corrective actions are followed through to completion.</p><p>Responsibilities</p><ul><li>Oversee MEP inspection activities to ensure compliance with project specifications.</li><li>Review inspection reports and document non-conformance items accurately.</li><li>Monitor site progress and verify MEP installations meet approved standards.</li><li>Collaborate with project teams to maintain safety and regulatory compliance.</li><li>Coordinate with contractors to resolve inspection findings and quality issues.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in mechanical, electrical, or civil engineering. 7+ years of experience inspecting MEP systems on large-scale construction projects. Proficiency in reading technical drawings, specifications, and inspection reports. Knowledge of applicable codes and standards for MEP inspections, including Saudi Building Code requirements and MEP inspection standards. Experience with quality inspection procedures. Eligible to work in Saudi Arabia.</p>

<p><strong style="font-size: 11px;">Inspection &amp; Testing</strong></p><ul><li>Coordinate source inspections and supplier surveillance activities.</li><li>Review and monitor supplier ITPs and inspection procedures.</li><li>Witness or coordinate:<ul><li>Factory Acceptance Tests (FAT)</li><li>Performance Tests</li><li>Functional Tests</li><li>Hydrostatic / Pressure Tests</li><li>Electrical Tests</li><li>Mechanical Tests</li><li>Material Tests</li><li>Dimensional Inspections</li><li>Coating / Painting Inspections</li><li>Welding Inspections</li><li>NDT Activities</li></ul></li><li>Review test results and verify compliance with specified acceptance criteria.</li><li>Ensure failed tests are investigated and corrective actions implemented.</li><li>Coordinate inspection release and material / equipment acceptance.</li><li>Verify final inspection documentation before shipment.</li></ul><p><strong>Procurement &amp; Engineering Coordination</strong></p><ul><li>Coordinate with Procurement to ensure quality requirements are incorporated into purchase orders and supplier agreements.</li><li>Review technical specifications and quality requirements included in procurement packages.</li><li>Coordinate with Engineering to clarify technical and quality requirements.</li><li>Review supplier technical submittals and deviations.</li><li>Monitor approved vendor and manufacturer lists.</li><li>Support technical evaluation of alternative suppliers where required.</li><li>Ensure supplier changes and substitutions follow the project approval process.</li><li>Monitor long-lead equipment quality status and risks.</li><li>Identify quality issues that may affect procurement schedules and project milestones.</li></ul><p><strong>Supplier NCR &amp; Corrective Action Management</strong></p><ul><li>Lead management of supplier-related NCRs and quality observations.</li><li>Review supplier proposed corrective actions.</li><li>Conduct or coordinate root cause analysis for significant quality issues.</li><li>Monitor corrective and preventive actions through closure.</li><li>Verify objective evidence supporting NCR closure.</li><li>Monitor recurring supplier defects and identify systemic issues.</li><li>Escalate critical quality issues and potential delivery risks to Project Management.</li></ul><p><strong>Supplier Performance Management</strong></p><ul><li>Establish and monitor supplier quality KPIs, including:<ul><li>NCR Rate</li><li>Inspection Pass Rate</li><li>FAT Pass Rate</li><li>Material Rejection Rate</li><li>Defect Rate</li><li>On-Time Quality Documentation</li><li>Corrective Action Closure</li><li>Repeat Non-Conformances</li></ul></li><li>Develop supplier quality performance reports and dashboards.</li><li>Identify underperforming suppliers and recommend improvement actions.</li><li>Support supplier performance reviews and quality meetings.</li><li>Participate in supplier audits and capability assessments.</li><li>Develop lessons learned and continuous improvement initiatives.</li></ul><p><strong>Airport / Infrastructure &amp; Critical Equipment</strong></p><ul><li>Provide supplier quality oversight for critical airport and infrastructure equipment.</li><li>Support quality management of equipment and materials associated with:<ul><li>MEP Systems</li><li>Electrical Systems</li><li>Mechanical Equipment</li><li>ICT / ELV Systems</li><li>Fire &amp; Life Safety Systems</li><li>Wet &amp; Dry Utilities</li><li>Roads &amp; Infrastructure</li><li>Airfield Systems</li><li>Specialist Airport Equipment</li></ul></li><li>Apply risk-based inspection strategies to critical and long-lead equipment.</li><li>Coordinate supplier inspections for equipment requiring specialized testing or certification.</li><li>Ensure critical equipment complies with Client, Consultant, authority, and airport requirements.</li></ul><p><strong>Quality Documentation &amp; Handover</strong></p><ul><li>Review and verify supplier Manufacturing Record Books (MRBs).</li><li>Ensure quality documentation is complete, accurate, and traceable.</li><li>Review:<ul><li>Material Certificates</li><li>Certificates of Conformity</li><li>Test Reports</li><li>Inspection Reports</li><li>FAT Records</li><li>Calibration Certificates</li><li>Welding Records</li><li>NDT Reports</li><li>Coating Reports</li><li>Release Notes</li><li>Warranty Documentation</li></ul></li><li>Coordinate submission of supplier quality dossiers for project handover.</li><li>Ensure final documentation is aligned with project and Client requirements.</li></ul><p><strong>What Required Skills You ll Bring</strong></p><ul><li>Bachelor's Degree in Engineering, Quality Management, Manufacturing Engineering , or a related discipline.</li><li>Minimum 10 years of relevant experience in supplier quality, vendor inspection, manufacturing quality, or project QA/QC.</li><li>Strong experience managing supplier and manufacturer quality for major construction / infrastructure projects.</li><li>Experience with major airport, infrastructure, industrial, transportation, or large-scale development projects is highly desirable.</li><li>Strong knowledge of supplier quality management and manufacturing inspection processes.</li><li>Experience with FATs, source inspections, vendor surveillance, NCR management, and quality documentation.</li><li>Strong understanding of ISO 9001 quality management systems.</li><li>Experience with multidisciplinary equipment and materials is preferred.</li><li>ASQ, CQI, ISO 9001 Lead Auditor, or equivalent certification is an advantage.</li><li>Strong communication, negotiation, coordination, analytical, and problem-solving skills.</li></ul><p><strong>What Desired Skills You ll Bring</strong></p><ul><li>Supplier Quality Management</li><li>Vendor Quality Assurance</li><li>Manufacturer Surveillance</li><li>Source Inspection</li><li>Factory Acceptance Testing</li><li>Supplier Auditing</li><li>Inspection &amp; Testing</li><li>Manufacturing Quality</li><li>NCR Management</li><li>Root Cause Analysis</li><li>Corrective &amp; Preventive Actions</li><li>Material &amp; Equipment Quality</li><li>Quality Documentation</li><li>Supplier Performance Management</li><li>Procurement Quality</li><li>Technical Coordination</li><li>Risk-Based Inspection</li><li>Quality Reporting</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Degree in Engineering, Quality Management, Manufacturing Engineering , or a related discipline. Minimum 10 years of relevant experience in supplier quality, vendor inspection, manufacturing quality, or project QA/QC. Strong experience managing supplier and manufacturer quality for major construction / infrastructure projects. Experience with major airport, infrastructure, industrial, transportation, or large-scale development projects is highly desirable. Strong knowledge of supplier quality management and manufacturing inspection processes. Experience with FATs, source inspections, vendor surveillance, NCR management, and quality documentation. Strong understanding of ISO 9001 quality management systems. Experience with multidisciplinary equipment and materials is preferred. ASQ, CQI, ISO 9001 Lead Auditor, or equivalent certification is an advantage. Strong communication, negotiation, coordination, analytical, and problem-solving skills.</p>

<h3 >About the Role</h3> <p >GE Vernova is seeking a <strong >Quality Inspector</strong> to join our team in Dammam, Eastern, Saudi Arabia. This full-time position is central to ensuring the integrity and quality of gas turbine component repairs. The role involves conducting comprehensive quality inspections throughout the repair process, from initial receipt to final output.</p> <h3 >Core Responsibilities</h3> <ul > <li >Conduct quality inspections during the repair of gas turbine components, covering incoming, in-process, and final stages.</li> <li >Identify nonconformances and defects in components.</li> <li >Evaluate inspection results against applicable codes, standards, and specifications.</li> <li >Ensure strict compliance with safety, quality, EHS, and company procedures.</li> <li >Act as a promoter of EHS, Quality, and compliance within the shop floor operations.</li> </ul> <h3 >Inspection and Reporting Duties</h3> <p >The Quality Inspector will be responsible for executing quality inspection tasks within cell operations. This includes building knowledge across all aspects of quality in operations and inspection during the repair cycle of gas turbine components. A key part of the role involves developing expertise in writing technical reports detailing job conditions and identified defects.</p> <h3 >Required Qualifications</h3> <ul > <li >A minimum of <strong >0-1 years</strong> of experience in a relevant quality inspection role.</li> </ul> <h3 >Essential Skills and Knowledge</h3> <ul > <li >Proficiency in NDT (Non-Destructive Testing) inspection methods.</li> <li >Ability to accurately read and interpret technical drawings and work instructions.</li> <li >Competence in using various measuring instruments for inspection purposes.</li> <li >Skill in preparing clear and concise technical reports.</li> </ul> <h3 >Commitment to Standards</h3> <p >The selected candidate must consistently conform to all established safety and quality requirements. This role expects individuals to lead by example, upholding the highest standards of quality and compliance in all operational aspects. Adherence to all GE Vernova policies and procedures is mandatory.</p>

<p><strong>Job Summary</strong></p><p>We are seeking an experienced QC Mechanical Inspector to oversee and verify mechanical inspection and quality control activities across project sites in Saudi Arabia. The role requires strong knowledge of mechanical inspection procedures, ITPs, QA/QC documentation, applicable codes and standards, and Saudi Aramco project requirements.</p><p><br></p><p><strong>Roles &amp; Responsibilities</strong></p><ul><li>Conduct inspections of mechanical equipment, installations, fabrication, and construction activities in accordance with approved drawings, specifications, ITPs, and project standards.</li><li>Perform material receiving, fit-up, fabrication, installation, dimensional, and final inspections.</li><li>Review and verify MTCs, inspection reports, test records, and QA/QC documentation.</li><li>Ensure compliance with approved ITPs, method statements, specifications, and Saudi Aramco standards.</li><li>Coordinate with construction teams, subcontractors, and client/third-party inspectors for inspection activities.</li><li>Raise and follow up on NCRs, observations, and corrective actions and ensure timely closure.</li><li>Maintain inspection records, checklists, reports, and quality documentation.</li><li>Participate in testing, pre-commissioning, and final inspection activities as required.</li><li>Monitor site activities to ensure adherence to approved quality and safety requirements.</li><li>Support preparation of Turnover/Mechanical Completion dossiers and other project quality records.</li></ul><p><br></p><p><strong>Mandatory Requirements</strong></p><ul><li>Diploma/Bachelor's Degree in Mechanical Engineering or equivalent technical qualification.</li><li>6+ years of relevant experience as a QC Mechanical Inspector.</li><li>Minimum 6+ years of relevant Gulf experience preferred/required.</li><li>Valid Saudi Aramco approval or proven experience working on Saudi Aramco projects.</li><li>Valid CBT certification, where applicable.</li><li>Strong knowledge of mechanical inspection procedures, ITP, QA/QC documentation, and project specifications.</li><li>Good understanding of applicable international codes, standards, and Saudi Aramco requirements.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>MEP INSPECTOR – SAUDI NATIONALS ONLY</p><p><br></p><p>Afniah Engineering Consulting Co. is seeking a qualified <b>MEP Inspector</b> to join our Project Supervision / Inspection &amp; Technical Support team in Saudi Arabia.</p><p><br></p><p>The MEP Inspector is responsible for inspecting and monitoring MEP construction and installation activities to ensure compliance with approved drawings, specifications, applicable engineering standards, project requirements, and Afniah quality and supervision procedures. The role supports effective project delivery through systematic inspection, testing, technical reporting, quality verification, site coordination, and follow-up of corrective actions.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>• Strong MEP inspection and testing skills.</p><p>• Knowledge of HVAC installation and compliance requirements.</p><p>• Knowledge of mechanical, electrical, plumbing, and building services systems.</p><p>• Ability to read and interpret MEP drawings and specifications.</p><p>• Knowledge of inspection and testing procedures.</p><p>• Knowledge of applicable engineering standards and regulatory requirements.</p><p>• Strong understanding of site safety and compliance requirements.</p><p>• Ability to identify technical defects and non-conforming works.</p><p>• Strong technical reporting and documentation skills.</p><p>• Good understanding of QA/QC procedures and Inspection &amp; Test Plans.</p><p>• Strong attention to detail and quality awareness.</p><p>• Good communication and coordination skills.</p><p>• Strong problem-solving and analytical skills.</p><p>• Proficiency in Microsoft Office and relevant project documentation systems.</p><p><br></p><p>QUALIFICATIONS:</p><p>Saudi National with a Bachelor’s degree or Diploma in Mechanical Engineering, Electrical Engineering, Building Services Engineering, or a related discipline from a recognised institution. Relevant professional or technical certification is advantageous.</p><p><br></p><p>EXPERIENCE:</p><p>Minimum three (5-7) years of relevant professional experience in MEP inspection, construction supervision, engineering consultancy, or project supervision. Experience in HVAC installation inspection and MEP system testing is preferred.</p></div>

<strong>Job Description Summary<br><br></strong>The Quality Inspector is responsible for supporting quality control activities on gas turbine components, including in-process quality inspection, final quality inspection, final report creation, and packing inspection processes. This role ensures that product quality requirements are met throughout the manufacturing and final preparation stages in accordance with approved work instructions, specifications, engineering requirements, and quality standards.<br><br>In addition to executing inspection activities accurately and consistently, this role is expected to demonstrate strong Lean behaviors, actively support problem solving, maintain 5S standards, contribute to root cause analysis (RCA), raise quality concerns, initiate NCRs when required, and support overall quality control across the line. The Quality Inspector plays an important role in driving overall Lean implementation by identifying improvement opportunities, supporting standard work, reducing waste, and helping improve process flow and operational performance.<br><br><strong>Job Description<br><br></strong><strong>Key Responsibilities<br><br></strong><ul><li>Perform Quality Inspection in accordance with approved work instructions, quality plans, and process requirements.</li><li>Review and verify Final Reports for completeness, accuracy, and compliance with quality requirements.</li><li>Raise quality concerns in a timely manner and escalate issues that may impact product quality, process compliance, or customer requirements.</li><li>Initiate and support NCR (Non-Conformance Report) activities as required to document and control nonconforming product or process conditions.</li><li>Contribute to root cause analysis (RCA) and corrective action activities to address recurring or significant quality issues.</li><li>Support overall quality control by ensuring inspection discipline, process compliance, and adherence to quality standards across the line.</li><li>Read and interpret work instructions, quality forms, technical documentation, specifications, and engineering drawings to ensure accurate inspection execution.</li><li>Record and maintain accurate inspection results, quality findings, and supporting documentation as required.</li><li>Use inspection tools, gauges, measuring devices, and related equipment safely and effectively.</li><li>Identify nonconforming conditions and support containment, documentation, escalation, and follow-up actions as required.</li><li>Adhere to Standard Work and Standard Work Combination Sheets to ensure consistency, quality, safety, and efficient line flow.</li><li>Maintain a clean, safe, and organized work area in accordance with 5S standards.</li><li>Demonstrate strong understanding and application of Lean principles in daily work activities.</li><li>Actively participate in problem solving, root cause analysis, and corrective action activities to address quality or process issues.</li><li>Identify and communicate opportunities for continuous improvement in safety, quality, cycle time, flow, and waste reduction.</li><li>Support improvements in standard work, line organization, visual management, and process discipline to strengthen overall Lean implementation.</li><li>Contribute to team efforts that improve line performance, operational efficiency, and overall shop productivity.</li><li>Work within takt time, cycle time, and standard process flow expectations to support production goals.</li><li>Use shop floor systems and interfaces such as ELM, SmartShop, and MyAndon as required.</li><li>Comply with company quality policies, safety requirements, applicable procedures, and standard work.<br><br></li></ul><strong>Required Qualifications<br><br></strong><ul><li>Diploma, technical college degree, or equivalent hands-on experience.</li><li>Knowledge or experience in welding quality inspection.<br><br></li></ul><strong>Desired Characteristics<br><br></strong><ul><li>Min 2 years’ experience working with gas turbine components or other precision aerospace/industrial parts.</li><li>NDT License is a plus<br><br></li></ul><strong><strong><strong>Additional Information<br><br></strong></strong></strong><strong>Relocation Assistance Provided: </strong>No

In a world of possibilities, pursue one with endless opportunities. Imagine Next!<p> </p>At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.<p> </p> <p> </p> <p> <u> <b>Job Description:</b> </u> </p> <p>Parsons is looking for a talented<span> </span> <b>Landscape Manager</b> <span> to join our team. In this role, you will manage horticultural, softscape, forestry, planting, and landscape establishment works across a major development program, with specific responsibility for protecting and enhancing heritage assets and cultural landscapes, and integrating landscape information within the project s BIM environment.</span> </p> <p> </p> <p> <b>What You ll Be Doing:</b> </p> <p> </p> <p> <b>Horticulture, Softscape and Landscape Establishment</b> </p> <ul> <li> <p>Manage horticultural, softscape, forestry, planting and landscape establishment activities across the project.</p> </li> <li> <p>Provide technical oversight on plant selection, tree species, nursery stock, soil preparation, planting methodology, irrigation requirements, fertilization, pruning, pest control and plant health.</p> </li> <li> <p>Review planting plans, landscape specifications, method statements, material submittals, inspection requests and contractor technical documentation.</p> </li> <li> <p>Monitor site works to ensure planting, tree works, soil works, irrigation interfaces and horticultural activities are delivered in line with approved designs, contract requirements and project quality standards.</p> </li> <li> <p>Inspect nursery stock, trees, palms, shrubs, groundcovers, turf and other plant materials to confirm quality, suitability and compliance before installation.</p> </li> <li> <p>Support tree management activities, including tree protection, relocation, replacement, establishment and long term maintenance planning.</p> </li> </ul> <p> </p> <p> <b>Heritage and Cultural Landscape Management</b> </p> <ul> <li> <p>Conserve the topography and open spaces within heritage zones and associated cultural landscapes so that their character, identity and image are preserved for future generations.</p> </li> <li> <p>Safeguard architectural heritage interrelated with the cultural landscape by ensuring that landscape and open space works respect and foster the special character and heritage of the region.</p> </li> <li> <p>Ensure that heritage related landscape works comply with the Client sustainability program, Saudi heritage legislation and applicable UNESCO and ICOMOS conservation guidelines.</p> </li> <li> <p>Enhance the relationship between people and heritage places by creating landscape connections that respect and support heritage buildings, cultural landscapes and their settings.</p> </li> <li> <p>In heritage zones, review and support the design of new landscape and open space developments so they are located, designed and scaled to avoid any detrimental impact on existing heritage, cultural landscapes or their visual setting.</p> </li> <li> <p><br></p></li></ul><ul><li> </li> </ul> <p> </p> <p> <b>What Required Skills You ll Bring:</b> </p> <ul> <li> <p>Bachelor s degree in Horticulture, Forestry, Agriculture, Arboriculture, Landscape Architecture, Environmental Science or a related discipline.</p> </li> <li> <p>Minimum of 18 years of relevant experience in horticulture, forestry, softscape, planting, landscape establishment or landscape maintenance.</p> </li> <li> <p>Strong technical knowledge of plant health, tree management, soil science, irrigation requirements, nursery stock, pest control, fertilization, pruning and landscape establishment.</p> </li> <li> <p>Experience managing horticultural or forestry works on large scale public realm, parks, infrastructure, mixed use, urban development or open space projects.</p> </li> <li> <p>Ability to review planting plans, landscape drawings, specifications, method statements, material submittals and inspection requests.</p> </li> <li> <p>Understanding of heritage sensitive environments and the need to conserve topography, open spaces and cultural landscapes in line with defined conservation principles.</p> </li> <li> <p>Familiarity with BIM enabled project delivery and coordination of landscape information with other disciplines (awareness of LOD concepts, data integrity and codification).</p> </li> </ul> <p> </p> <p> <b>What Desired Skills You ll Bring:</b> </p> <ul> <li> <p>Experience working in the GCC or Middle East region.</p> </li> <li> <p>Knowledge of arid climate planting, native and adaptive species, water efficient landscaping and sustainable horticultural practices.</p> </li> <li> <p>Experience with tree surveys, tree relocation, tree protection, forestry management or arboricultural assessments.</p> </li> <li> <p>Experience with nursery management, plant procurement and plant material inspections.</p> </li> <li> <p>Experience working on projects involving heritage assets, cultural landscapes or historic environments.</p> </li> <li> <p>Experience contributing landscape information to BIM models and participating in BIM coordination activities.</p> </li> <li> <p>Professional certification or membership in horticulture, forestry, arboriculture, agriculture, irrigation or a related discipline.</p> </li> <li> <p>Previous experience in a PMC, supervision consultant, contractor or client representative environment.</p> </li> </ul> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p>Parsons equally employs representation at all job levels no matter the race, color, religion, sex (including pregnancy), national origin, age, disability or genetic information.<p> </p> <p> </p> <p>We truly invest and care about our employee s wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest APPLY TODAY!</p> <p> </p> <p> </p> <p>Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to<span> </span> <span>https://www.parsons.com/fraudulent-recruitment/</span> .</p>

<div><span style="font-size: 11px;">We are looking for a candidate to join our Quantum Applications department delivery team to build and deliver client-facing solutions based on Pasqal’s quantum ML algorithm portfolio.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">his is an application-driven engineering role focused on adapting, integrating, and deploying existing approaches to real-world partner and client use cases. The goal is to turn existing methods into reliable client deliverables; contributions to internal method improvement are welcome when they directly support project outcomes.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">As a Senior machine learning engineer with around 5 years of professional experience at least with interest in quantum computing (physics background is a plus, not a requirement), you will:</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Adapt and implement Pasqal’s existing quantum(-enhanced) graph ML algorithms to fit client datasets, constraints, and performance targets.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Build and maintain robust ML pipelines (data ingestion, preprocessing, training, evaluation, post-processing), including integration with quantum execution workflows, emulation/simulation platforms, and internal tooling.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Establish baselines, metrics, and acceptance criteria with stakeholders, and drive solution iterations until delivery requirements are met.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Collaborate closely with internal R&amp;D teams to transfer methods from research to application, clarify assumptions/limits, and select the best approach from the portfolio for each use case.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Work with hardware and platform engineers to run solutions on Pasqal QPUs, taking into account hardware constraints, execution constraints, and reliability.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Work closely with domain experts from high profile enterprises and partners to deliver solutions on real-world business problems</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Produce maintainable code, documentation, and handover material so delivered solutions can be reused and supported.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Keeping a regular scientific and technological watch.</span></div><div><br></div>

<p>Location: Madinah / Kingdom of Saudi Arabia</p><p>Division: Anti termite Treatment, Waterproofing, Insulation and Concrete Treatment</p><p><br></p><p>Indigo Builders, Madinah is looking for a Technical Business Development / Sales Engineer to develop business opportunities in Anti termite Treatment, Waterproofing, Insulation and Concrete Treatment and related specialized construction services. The selected candidate will be responsible for generating new leads, developing relationships with contractors, consultants, developers and facility-management companies. Conducting site visits, understanding client requirements, preparing quotations and following opportunities through to award and collection.</p><p><br></p><p><strong>Key Responsibilities</strong></p><p>-Generate new business leads and identify project opportunities</p><p>-Visit contractors, consultants, developers and project sites</p><p>- Conduct initial site surveys and understand technical requirements</p><p>- Prepare quotations, proposals and technical/commercial offers</p><p>- Follow up RFQs, tenders and submitted quotations</p><p>- Build and maintain strong client relationships</p><p>- Coordinate with the technical and execution teams</p><p>- Maintain a database of prospects, projects and follow-ups</p><p>- Support vendor registrations and prequalification submissions</p><p>- Achieve monthly sales and business-development targets</p><p><br></p><p><strong>Candidate Profile</strong></p><p>- Civil Engineering or relevant technical qualification preferred</p><p>- 5+ years of experience in Saudi Arabia construction market preferred</p><p>- Minimum 5 years of marketing/sales experience within the construction industry</p><p>- Experience in Anti termite Treatment, Waterproofing, Insulation and Concrete Treatment is an advantage</p><p>- Good knowledge of BOQs, drawings and quotations</p><p>- Strong communication, negotiation and presentation skills</p><p>- Must be fluent in Arabic (spoken and written)</p><p>- Existing relationships with contractors, consultants or developers will be a major advantage</p><p>- Valid Saudi driving license required; candidate must have a personal vehicle (car and fuel allowance provided)</p><p><br></p><p><strong>Compensation</strong></p><ul><li>SAR 4,500 – 5,500 basic salary (depending on experience) plus sales commission.</li></ul>

<p><strong>Job Summary</strong></p><p>MOBCO Group is seeking an experienced Facility Management Engineer with a strong mechanical engineering background and proven experience in facility management operations. The candidate will be responsible for overseeing the operation, maintenance, and performance of building facilities and mechanical systems.</p><p><strong>Key Responsibilities</strong></p><ul><li>Manage and supervise day-to-day facility management and maintenance activities.</li><li>Oversee the operation and maintenance of HVAC, mechanical, plumbing, and other building systems.</li><li>Plan and monitor preventive and corrective maintenance activities.</li><li>Coordinate with maintenance teams, contractors, and service providers to ensure timely completion of work.</li><li>Conduct regular inspections of facilities and identify maintenance requirements and potential issues.</li><li>Monitor the performance and condition of mechanical equipment and building systems.</li><li>Ensure all maintenance activities comply with approved standards, procedures, and HSE requirements.</li><li>Manage maintenance schedules, work orders, service reports, and technical documentation.</li><li>Monitor contractors and ensure compliance with contractual and service-level requirements.</li><li>Respond promptly to breakdowns, emergencies, and facility-related issues.</li><li>Monitor maintenance costs, spare parts, manpower, and other operational requirements.</li><li>Prepare regular facility management and maintenance reports for management.</li><li>Ensure proper implementation of preventive maintenance programs to minimize equipment downtime.</li></ul><p><strong>Requirements</strong></p><ul><li>Minimum 10 years of relevant experience.</li><li>B.Sc. in Mechanical Engineering is mandatory.</li><li>Proven experience in Facility Management and building maintenance.</li><li>Strong knowledge of HVAC, mechanical systems, plumbing, and general building services.</li><li>Experience managing maintenance teams, contractors, and service providers.</li><li>Strong understanding of preventive and corrective maintenance practices.</li><li>Good knowledge of HSE requirements and facility management procedures.</li><li>Strong communication, coordination, and problem-solving skills.</li></ul><p><br></p><p><br></p><p><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><span><span><span><span><span>On behalf of our client, we are looking to hire a Site Supervisor&nbsp;</span></span></span></span></span><span><span><span><span><span>to join their team in Riyadh.</span></span></span></span></span><br><br><span><span><span><span><span>Job Summary:&nbsp;</span></span></span></span></span><br><br><span>The Site Supervisor supports the supervision of daily façade installation activities on-site, ensuring work is carried out safely, efficiently, and in accordance with approved drawings, specifications, and project requirements.</span><br><br><span><span><span><span><span><b><span><span>Responsibilities:&nbsp;</span></span></b></span></span></span></span></span><br><br><span><span><span><span><span><b><span><span>​</span></span></b></span></span></span></span></span><br><br></span><p><span>• Support the supervision of daily façade installation activities according to approved drawings and procedures.</span><br></p><br><p><span>• Coordinate with site engineers, subcontractors, and workers regarding daily activities, manpower, and materials. </span><br></p><br><span>• Assist with site inspections and progress monitoring to ensure activities are completed as planned.</span><br><br><p><span>• Check that façade components are installed according to shop drawings and approved methods.</span><br></p><br><p><span>• Support HSE and quality requirements, including safety checks and identification of site issues.</span><br></p><br><p><span>• Report technical, material, or installation issues to the Senior Site Engineer / Project Manager.</span><br></p><br><p><span>• Maintain basic records of daily progress, manpower, materials, and site activities.</span><br></p><br><span>• Support the team in checking completed works and following up on defect rectification.</span><br><br><span><span>Requirements:&nbsp;</span></span><br><br><p><span>• Diploma or Bachelor’s degree in Civil Engineering, Construction, Architecture, or a related field preferred.</span><br></p><br><p><span>• 1–2 years of experience in construction or site-related work.</span><br></p><br><p><span>• Basic understanding of construction drawings and site activities.</span><br></p><br><p><span>• Basic knowledge of HSE and quality requirements.</span><br></p><br><p><span>• Good communication, teamwork, and organizational skills.</span><br></p><br><p><span>• Willingness to work on-site and learn façade installation and construction practices.</span><br></p><br><span>• Basic proficiency in MS Office / Excel.&nbsp;</span><br><br><p>Compensation Decisions:&nbsp;<br></p><br><span><b>Salary:</b> SAR 8,000 to 10,000 per month</span><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 2+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>We are looking for a AI Engineer to serve as one of the first technical hires in our client's newly established Data &amp; AI Office in Dammam. In this role, you will take hands-on ownership of building, hardening, and scaling production-grade AI applications, RAG services, and multi-agent systems built directly into an enterprise Azure environment.</p><p><br></p><p>What You’ll Do:</p><ul><li>Enterprise AI &amp; Agentic Systems: Architect and deploy production RAG services, vector store integrations, and multi-agent orchestrations (task decomposition, tool calling, state management) co-developed alongside specialist partners.</li><li>Full-Stack Engineering: Build across the full stack—developing robust Python microservices/APIs and thin, functional TypeScript/React interfaces for investment professionals.</li><li>Platform Architecture &amp; Gateways: Build model-agnostic inference wrappers, automated failover routing, parameterized guardrail modules, and cost/token control gateways.</li><li>Security &amp; Change Governance: Implement prompt-injection defenses, schema-allowlisted read-only queries, managed identities, private networking, and change-managed CI/CD pipelines.</li></ul><p><br></p><p>What We’re Looking For</p><ul><li>5–10 years of software engineering experience with proven hands-on deployment of LLM-enabled systems to production.</li><li>Deep proficiency in Python, TypeScript/React, enterprise Azure (App Service, Functions, Key Vault, Log Analytics), Docker, and IaC (Bicep/Terraform).</li><li>Strong background operating in security-sensitive, fiduciary, or financial services environments with a "founding-team" high-agency mindset.</li></ul><p><br></p><p>What's On Offer?</p><ul><li>Competitive monthly salary package </li><li>Tax-free compensation package in Dammam, Saudi Arabia</li><li>Visa sponsorship, relocation support, and comprehensive family benefits</li><li>High-impact ground-floor role setting the firm-wide engineering standards for AI</li><li>Family medical insurance</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of Project Control Engineer in Saudi Arabia. Our client is seeking an experienced civil engineering professional to support project planning, scheduling, monitoring, reporting, and control activities for infrastructure/civil site projects.</span><br></p><br><p><b><span>Key Responsibilities:</span></b><br></p><br><ul><li><span>Develop and maintain project schedules for infrastructure and civil construction activities.</span><br></li><li><span>Monitor project progress against approved schedules and milestones.</span><br></li><li><span>Coordinate with construction, engineering, procurement, and project management teams.</span><br></li><li><span>Prepare progress reports, schedule updates, and project control documentation.</span><br></li><li><span>Track planned versus actual progress and identify schedule deviations.</span><br></li><li><span>Support recovery planning and corrective actions for delayed activities.</span><br></li><li><span>Monitor project resources, productivity, and key performance indicators.</span><br></li><li><span>Maintain project control records and provide timely updates to project management.</span><br></li></ul><p><b><span>Required Skills:</span></b><br></p><br><ol><li><span>Project Planning — ability to develop and monitor construction schedules.</span><br></li><li><span>Project Scheduling — experience tracking activities, milestones, and dependencies.</span><br></li><li><span>Primavera P6 — knowledge of construction planning and scheduling tools.</span><br></li><li><span>Civil/Infrastructure Projects — relevant site/project control experience.</span><br></li><li><span>Progress Monitoring — ability to measure planned versus actual progress.</span><br></li></ol><p><b><span>Preferred Skills:</span></b><br></p><br><ul><li><span>Advanced Primavera P6 proficiency.</span><br></li><li><span>Experience with major infrastructure projects.</span><br></li><li><span>Knowledge of project cost and resource control.</span><br></li></ul><b><span>Work Experience Requirements:</span></b><br><br><span>Minimum 8 years of experience is required, with relevant experience in project controls for infrastructure or civil construction projects. Candidates should have practical exposure to project planning, scheduling, progress monitoring, and reporting.</span><br><br><p><b><span>Education:</span></b><br></p><br><ul><li><span>Minimum: Bachelor of Civil Engineering</span><br></li></ul>Contact Number - 97868 88866 <br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 5+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Join our innovative team as a Mechanical Engineer in Riyadh, Saudi Arabia, where you will play a pivotal role in enhancing our market research capabilities. This position offers a unique opportunity to leverage your engineering expertise to develop solutions that directly impact our research initiatives. You will be part of a collaborative environment that values creativity and growth, with ample opportunities for professional development and career progression.</p><p><b>Responsibilities:</b></p><ol><li>Design mechanical systems and components using CAD software, ensuring alignment with project specifications and industry standards.</li><li>Conduct feasibility studies to assess project viability, providing detailed cost analysis to guide decision-making.</li><li>Collaborate with product managers and researchers to integrate engineering solutions into market research processes effectively.</li><li>Perform testing and validation of designs, ensuring compliance with safety regulations and performance benchmarks.</li><li>Provide technical support during implementation, promptly resolving issues to maintain project timelines.</li><li>Create comprehensive documentation, including reports and presentations, to communicate findings to stakeholders.</li><li>Stay updated on industry trends to incorporate new technologies into engineering practices.</li><li>Mentor junior engineers, fostering a culture of learning and professional development within the team.</li><li>Identify areas for process improvement to enhance project delivery efficiency and effectiveness.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Proficient in CAD software for mechanical design and modeling.</li><li>Strong analytical skills for conducting feasibility studies and cost analyses.</li><li>Excellent communication abilities for effective teamwork and stakeholder engagement.</li><li>Experience in testing and validation methodologies for compliance assurance.</li><li>Knowledge of industry trends in mechanical engineering for innovative solutions.</li><li>Leadership skills to mentor junior engineers and promote collaboration.</li><li>Problem-solving capabilities to troubleshoot mechanical systems effectively.</li></ul></div>