Industrial Diploma Jobs - Medina Saudi

<p>Smart Resourcing International is hiring experienced Maintenance Engineers / Field Service Engineers for a leading Hydrogen Systems project in Riyadh, Kingdom of Saudi Arabia .</p><p>POSITION Maintenance Engineer / Field Service Engineer Hydrogen Electrolyser Systems</p><p>TECHNOLOGY PLATFORM Teledyne Technologies Incorporated TITAN Series Alkaline Electrolyser Systems Experience with TITAN Series HMXT / EC / EL Models will be preferred.</p><p>KEY RESPONSIBILITIES</p><ul><li>Installation, commissioning, operation support, maintenance, and troubleshooting of alkaline hydrogen electrolyser systems .</li><li>Perform preventive, predictive, and corrective maintenance activities.</li><li>Diagnose and troubleshoot electrical, instrumentation, PLC, control, and automation-related faults .</li><li>Identify equipment failures and implement appropriate corrective actions.</li><li>Support commissioning and start-up activities for hydrogen production systems.</li><li>Monitor equipment performance and ensure reliable operation of electrolyser systems.</li><li>Carry out field service activities and provide technical support at project sites.</li><li>Work with mechanical, electrical, instrumentation, and control systems associated with electrolyser plants.</li><li>Interpret technical drawings, equipment manuals, electrical diagrams, P&amp;IDs, and instrumentation documents.</li><li>Maintain proper service, maintenance, inspection, and troubleshooting records.</li><li>Coordinate with project, engineering, operations, and maintenance teams to resolve technical issues.</li><li>Follow approved maintenance procedures, company standards, and site requirements.</li><li>Ensure strict compliance with HSE standards, permit-to-work procedures, and safe working practices .</li><li>Participate in equipment inspections, testing, commissioning, and performance-related activities.</li></ul><p>REQUIRED TECHNICAL EXPERIENCE</p><ul><li>Hands-on experience in industrial equipment maintenance, field service, commissioning, or troubleshooting .</li><li>Experience with hydrogen electrolyser systems will be highly preferred.</li><li>Knowledge or experience with Teledyne TITAN Series Alkaline Electrolyser Systems will be an added advantage.</li><li>Strong knowledge of PLC systems, instrumentation, industrial automation, and process control .</li><li>Ability to troubleshoot electrical and instrumentation/control systems.</li><li>Knowledge of industrial process equipment and maintenance practices.</li><li>Experience working on complex industrial projects, plants, or process systems.</li><li>Good understanding of preventive and corrective maintenance procedures.</li><li>Ability to read and understand P&amp;IDs, electrical drawings, control schematics, and technical documentation .</li><li>Strong analytical and problem-solving skills.</li><li>Good understanding of industrial HSE and safety procedures .</li></ul><p><strong>Desired Candidate Profile</strong></p><h3>QUALIFICATION</h3>Bachelor's Degree / Diploma in: Mechanical Engineering Electrical Engineering Instrumentation Engineering Electronics / Automation Engineering or another relevant engineering discipline.<h3>CANDIDATE PROFILE</h3>Candidates with experience in the following areas may be considered: Hydrogen Systems | Electrolysers | Alkaline Electrolysers | Industrial Automation | PLC | Instrumentation | Process Control | Commissioning | Field Service | Plant Maintenance | Electrical Maintenance

Job Description <ul> <li>Conduct comprehensive inspections of pressure vessels, storage tanks, piping systems, and mechanical components to ensure compliance with project specifications, codes, and standards.</li> <li>Perform welding inspections in accordance with <strong>CSWIP 3.2</strong> standards, including visual inspections, dimensional checks, and defect identification.</li> <li>Conduct in-service inspection, assessment, and certification of pressure vessels (<strong>API 510</strong>) and storage tanks (<strong>API 653</strong>).</li> <li>Review fabrication, erection, and maintenance procedures for compliance with engineering drawings and standards.</li> <li>Prepare detailed inspection reports, non-conformance reports (NCRs), and recommendations for corrective actions.</li> <li>Coordinate with project engineers, QA/QC teams, and contractors to ensure timely and effective resolution of inspection issues.</li> <li>Mentor and guide junior inspectors to enhance inspection quality and compliance awareness.</li> <li>Maintain up-to-date knowledge of industry standards, codes, and best practices relevant to oil and gas mechanical inspections.Company Description</li></ul>Qualifications <p></p> <ul> <li> <strong>BE/BTech in Mechanical Engineering</strong> with a minimum of <strong>6 years of inspection experience</strong>; OR <strong>2-year Industrial/Technical College Diploma</strong> with a minimum of<strong> 12 years of inspection experience.</strong> </li> <li> <p> <strong>Mandatory Certifications:</strong> Valid <strong>CSWIP 3.2 and API 570 certifications.</strong> Both<strong> certifications are compulsory.</strong> </p> </li> <li> <p> <strong>Driving Licence:</strong> Valid <strong>Saudi driving licence</strong> is mandatory.</p> </li> <li>Demonstrated thorough knowledge of applicable international standards.</li> <li>Demonstrated full working knowledge of quality system standards and methods</li></ul><p><strong>Desired Candidate Profile</strong></p><ul> <li> <strong>BE/BTech in Mechanical Engineering</strong> with a minimum of <strong>6 years of inspection experience</strong>; OR <strong>2-year Industrial/Technical College Diploma</strong> with a minimum of<strong> 12 years of inspection experience.</strong> </li> <li> <p> <strong>Mandatory Certifications:</strong> Valid <strong>CSWIP 3.2 and API 570 certifications.</strong> Both<strong> certifications are compulsory.</strong> </p> </li> <li> <p> <strong>Driving Licence:</strong> Valid <strong>Saudi driving licence</strong> is mandatory.</p> </li> <li>Demonstrated thorough knowledge of applicable international standards.</li> <li>Demonstrated full working knowledge of quality system standards and methods</li></ul>

Job Purpose:The Pellet Mill Operator is responsible for operating, monitoring, and maintaining pellet mill equipment to produce high-quality pellets that meet production and quality standards. The operator ensures efficient production, monitors process parameters, performs routine equipment inspections, and follows all health, safety, and environmental (HSE) procedures.<br>Key Responsibilities:Operate and monitor pellet mill equipment in accordance with standard operating procedures. Start up, adjust, and shut down pellet mill systems safely and efficiently. Monitor production parameters, including temperature, pressure, moisture content, and pellet quality. Adjust machine settings to optimize pellet production and minimize waste. Inspect raw materials and finished products to ensure compliance with quality specifications. Perform routine equipment inspections and report any mechanical or operational issues. Conduct basic preventive maintenance, cleaning, lubrication, and minor adjustments to equipment. Coordinate with maintenance personnel for equipment repairs and planned maintenance activities. Record production data, equipment performance, downtime, and maintenance activities. Maintain cleanliness and housekeeping in the production area. Follow all health, safety, environmental, and quality procedures, including proper use of personal protective equipment (PPE). Assist with inventory monitoring of raw materials and production supplies. Support continuous improvement initiatives to enhance productivity and product quality.<br>Required Qualifications High school diploma, technical certificate, or equivalent qualification. Experience operating pellet mills or similar industrial processing equipment is preferred. Basic knowledge of mechanical equipment and manufacturing processes. Ability to understand operating procedures and production documentation. Basic computer skills for recording production data.<br>Required Skills:Ability to operate and monitor industrial machinery safely. Good mechanical aptitude and basic troubleshooting skills. Strong attention to detail and quality control. Ability to identify and respond to process abnormalities. Good communication and teamwork skills. Time management and organizational abilities. Ability to work independently with minimal supervision. Commitment to workplace safety and operational excellence.

<p>Clean and prepare metallic surfaces, piping, and fabricated structures using abrasive blasting to achieve specified cleanliness profiles (e.g., SA 2.5 / NACE 2). Mix and prepare industrial paints, primers, and chemical coatings in strict accordance with Technical Data Sheets (TDS) and Material Safety Data Sheets (MSDS). Operate airless and conventional spray equipment to apply primers, intermediate, and finish coats to specified dry film thicknesses. Perform wet and dry film thickness measurements using specialized gauges to ensure compliance with quality standards. Inspect, clean, and maintain blasting pots, air compressors, spray guns, hoses, and pressure regulators on a routine basis. Mask and shield critical components, machined faces, threads, and electrical parts from overspray and damage. Monitor and record ambient conditions, including relative humidity, dew point, and steel surface temperatures prior to application. Maintain accurate logs of material batches, environmental parameters, and layer thickness test results on daily job reports. Safely handle, store, and dispose of paints, thinners, solvents, and hazardous waste in accordance with environmental regulations.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma in a relevant technical field. NACE / AMPP (or equivalent) Blasting &amp; Coating Certification. Minimum of 2 years of hands on experience in blasting and painting industrial structures. Proficient in reading and applying TDS and MSDS documentation. Ability to operate and maintain blasting pots, air compressors, and spray equipment. Experience with wet and dry film thickness measurement techniques. Knowledge of environmental condition monitoring (humidity, dew point, surface temperature). Demonstrated safe handling and disposal of hazardous chemicals and waste. Strong documentation and reporting skills. Effective teamwork and communication abilities.</p>

<h3 >About House of Consulting Office (HCO)</h3> <p >House of Consulting Office for Consulting Engineers Co. (HCO) is a leading multidisciplinary consulting engineering firm in Saudi Arabia. We provide integrated architectural, engineering, planning, and project management consultancy services, delivering comprehensive solutions that support clients throughout the entire project lifecycle.</p> <h3 >The Role: Document Controller</h3> <p >We are seeking an experienced Document Controller to join our team in <strong >AlUla, Al Madinah, Saudi Arabia</strong>. This full-time role is crucial for supporting the delivery of a major construction project by ensuring all project documentation is meticulously managed, organized, and maintained according to established standards.</p> <h3 >Key Responsibilities</h3> <ul > <li >Manage, organize, and maintain all project documentation in accordance with company procedures and document control standards.</li> <li >Receive, register, distribute, track, and archive project documents, drawings, and correspondence.</li> <li >Ensure all documents are properly reviewed, approved, and issued to relevant stakeholders.</li> <li >Maintain document control logs, registers, and filing systems.</li> <li >Coordinate with project teams, consultants, contractors, and clients regarding document submissions and revisions.</li> <li >Monitor document workflows and ensure timely processing of all project documentation.</li> <li >Prepare reports related to document status, transmittals, and outstanding submissions.</li> <li >Ensure confidentiality, accuracy, and integrity of project records.</li> <li >Support project teams by maintaining up-to-date documentation throughout the project lifecycle.</li> <li >Ensure compliance with company procedures and project documentation requirements.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Bachelor's Degree or Diploma in Business Administration, Engineering, or a related field.</li> <li >Minimum of <strong >5 years of experience</strong> as a Document Controller in construction or engineering projects.</li> <li >Previous experience working with Project Management Consultancy (PMC) organizations is preferred.</li> <li >Proficiency in document control systems such as Aconex, EDMS, Autodesk Construction Cloud (ACC), or similar platforms.</li> </ul> <h3 >Essential Skills and Attributes</h3> <ul > <li >Excellent knowledge of document management procedures and project documentation workflows.</li> <li >Strong organizational, communication, and coordination skills.</li> <li >Proficiency in Microsoft Office applications, particularly Excel and Word.</li> <li >Ability to work effectively in a fast-paced, site-based environment.</li> </ul> <h3 >Work Environment</h3> <p >This full-time position requires working effectively in a dynamic, site-based environment in AlUla, Al Madinah, Saudi Arabia, as part of a dedicated project team.</p>

<p>Responsible for leading maintenance activities for plastic manufacturing machinery and plant utilities. Handle preventive and breakdown maintenance, troubleshoot electrical/mechanical issues, and ensure maximum machine availability. Key Responsibilities: Lead daily maintenance activities and maintenance technicians. Perform preventive, predictive, and breakdown maintenance. Troubleshoot injection moulding/extrusion machines, PLC, VFD, hydraulic and pneumatic systems. Maintain plant utilities such as compressors, chillers, pumps, and electrical systems. Ensure minimum downtime and timely breakdown resolution. Maintain maintenance records, spare-parts requirements, and safety standards. Coordinate with production and engineering teams for smooth plant operations.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma in mechanical engineering with minimum 2 yes experience in the industrial sector</p>

<p><br></p> <p>1. Job Summary</p> <p>The Lifting Engineer / Heavy Lifting Engineer will be responsible for planning, coordinating, supervising, and controlling heavy lifting and equipment erection activities at power plant and EPC project sites. The role involves preparing lifting plans, conducting rigging studies, verifying crane capacities, and ensuring all lifting operations comply with approved procedures, project specifications, and applicable health, safety, and environmental (HSE) requirements.</p> <p>2. Key Responsibilities</p> <ul> <li>Plan, supervise, and control lifting and erection activities for HRSG, turbines, piping systems, structural steel, and heavy equipment.</li> <li>Prepare and review lifting plans, crane load charts, crane configurations, rigging studies, and lifting sequences.</li> <li>Verify crane capacity, ground-bearing conditions, lifting accessories, rigging arrangements, and exclusion zones before executing critical lifting operations.</li> <li>Coordinate with construction, rigging, HSE, QA/QC, and subcontractor teams to ensure safe and efficient lifting activities.</li> <li>Conduct toolbox talks and ensure lifting operations comply with approved method statements, Job Safety Analysis (JSA), Risk Assessments (RA), and Permit to Work (PTW) requirements.</li> <li>Supervise and monitor critical lifting operations, ensuring proper positioning, alignment, and protection of equipment during erection.</li> <li>Inspect lifting equipment and accessories to ensure they are certified, fit for purpose, and compliant with project requirements.</li> <li>Maintain lifting operation records, inspection certificates, equipment certification documents, and daily progress reports.</li> <li>Identify potential lifting hazards, implement preventive measures, and ensure compliance with project HSE procedures.</li> <li>Stop unsafe lifting operations and implement appropriate corrective actions to prevent incidents and equipment damage.</li> <li>Coordinate lifting activities with construction schedules and other site operations to minimize delays and ensure timely project execution.</li> </ul> <p>3. Educational Qualifications</p> <ul> <li>Diploma or Bachelor s Degree in Mechanical Engineering or a related engineering discipline.</li> <li>Relevant technical or professional certifications in lifting operations, rigging, crane operations, or lifting supervision will be an advantage.</li> </ul> <p>4. Experience Requirements</p> <ul> <li>Minimum <strong>5 8+ years of relevant experience</strong> in heavy lifting, rigging, and equipment erection activities.</li> <li>Experience in Combined Cycle Power Plant (CCPP), EPC, industrial, or power plant construction projects is preferred.</li> <li>Hands-on experience with HRSG, steam turbines, structural steel, piping systems, and heavy equipment erection.</li> <li>Previous experience working on projects in Saudi Arabia is preferred.</li> </ul> <p>5. Technical Skills and Competencies</p> <ul> <li>Strong knowledge of cranes, rigging equipment, lifting accessories, and lifting operations.</li> <li>Ability to prepare and interpret lifting plans, crane load charts, rigging studies, and load calculations.</li> <li>Knowledge of crane configuration, load distribution, ground-bearing pressure, and lifting radius calculations.</li> <li>Ability to read and interpret engineering drawings, equipment layouts, and lifting studies.</li> <li>Knowledge of critical lifting procedures, risk assessments, and safe lifting practices.</li> <li>Familiarity with Saudi Aramco, Saudi Electricity Company (SEC), and project-specific HSE requirements, where applicable.</li> <li>Good coordination, communication, planning, and problem-solving skills.</li> <li>Ability to work effectively in a construction site environment and coordinate with multidisciplinary teams.</li> </ul> <p>6. Health, Safety, and Compliance</p> <ul> <li>Ensure all lifting activities comply with approved lifting plans, method statements, and project HSE procedures.</li> <li>Verify that cranes, rigging equipment, and lifting accessories have valid inspection and certification documents.</li> <li>Ensure all personnel involved in lifting operations possess the required qualifications and authorizations.</li> <li>Maintain safe working conditions by enforcing exclusion zones, communication protocols, and emergency procedures.</li> <li>Ensure compliance with applicable PTW systems and project-specific safety standards.</li> </ul> <p>7. Preferred Requirements</p> <ul> <li>Previous experience in Saudi Arabia's power plant or EPC construction projects.</li> <li>Relevant lifting engineering, rigging, or lifting supervision certifications.</li> <li>Experience with critical and heavy lifts involving HRSG modules, turbines, and large industrial equipment.</li> <li>Familiarity with Saudi Aramco or SEC project standards and procedures, where applicable.</li> </ul> <p>8. Key Competencies</p> <ul> <li>Strong technical and analytical skills.</li> <li>Effective site coordination and leadership.</li> <li>Attention to detail and safety awareness.</li> <li>Ability to make sound decisions under pressure.</li> <li>Strong commitment to quality, safety, and project deadlines.</li> </ul> <p><strong>Note:</strong> Candidates should have relevant heavy lifting and erection experience, preferably in CCPP or EPC projects. Experience in Saudi Arabia and knowledge of applicable client-specific HSE requirements will be an added advantage.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma or Bachelor s Degree in Mechanical Engineering or a related engineering discipline.</li><li>Relevant technical or professional certifications in lifting operations, rigging, crane operations, or lifting supervision will be an advantage.</li><li>Minimum <strong>5 8+ years of relevant experience</strong> in heavy lifting, rigging, and equipment erection activities.</li><li>Experience in Combined Cycle Power Plant (CCPP), EPC, industrial, or power plant construction projects is preferred.</li><li>Hands-on experience with HRSG, steam turbines, structural steel, piping systems, and heavy equipment erection.</li><li>Previous experience working on projects in Saudi Arabia is preferred.</li><li>Strong knowledge of cranes, rigging equipment, lifting accessories, and lifting operations.</li><li>Ability to prepare and interpret lifting plans, crane load charts, rigging studies, and load calculations.</li><li>Knowledge of crane configuration, load distribution, ground-bearing pressure, and lifting radius calculations.</li><li>Ability to read and interpret engineering drawings, equipment layouts, and lifting studies.</li><li>Knowledge of critical lifting procedures, risk assessments, and safe lifting practices.</li><li>Familiarity with Saudi Aramco, Saudi Electricity Company (SEC), and project-specific HSE requirements, where applicable.</li><li>Good coordination, communication, planning, and problem-solving skills.</li><li>Ability to work effectively in a construction site environment and coordinate with multidisciplinary teams.</li><li>Ensure all lifting activities comply with approved lifting plans, method statements, and project HSE procedures.</li><li>Verify that cranes, rigging equipment, and lifting accessories have valid inspection and certification documents.</li><li>Ensure all personnel involved in lifting operations possess the required qualifications and authorizations.</li><li>Maintain safe working conditions by enforcing exclusion zones, communication protocols, and emergency procedures.</li><li>Ensure compliance with applicable PTW systems and project-specific safety standards.</li><li>Previous experience in Saudi Arabia's power plant or EPC construction projects.</li><li>Relevant lifting engineering, rigging, or lifting supervision certifications.</li><li>Experience with critical and heavy lifts involving HRSG modules, turbines, and large industrial equipment.</li><li>Familiarity with Saudi Aramco or SEC project standards and procedures, where applicable.</li><li>Strong technical and analytical skills.</li><li>Effective site coordination and leadership.</li><li>Attention to detail and safety awareness.</li><li>Ability to make sound decisions under pressure.</li><li>Strong commitment to quality, safety, and project deadlines.</li></ul>

<ul><li>Execute post-weld heat treatment (PWHT) procedures precisely according to engineering specifications and applicable codes (e.g., ASME, API).</li><li>Set up and operate various heating equipment, including resistance heating elements, induction heating systems, and furnaces, ensuring proper insulation.</li><li>Monitor and record temperature profiles using calibrated thermocouples and data loggers throughout the entire heating and cooling cycle.</li><li>Troubleshoot and resolve heating anomalies or equipment malfunctions promptly to maintain treatment integrity and project timelines.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>High School Diploma or equivalent qualification.</li><li>Certified as a Level II or Level III Non-Destructive Testing (NDT) technician with a specialization in PWHT.</li><li>Minimum of 5 years of hands-on experience in performing PWHT on diverse materials and components in industrial settings.</li><li>Proficiency in interpreting welding procedures, code requirements (ASME Section IX, API , and P&IDs.</li></ul>

<p>To collect accurate vibration and condition-monitoring data from rotating equipment to support predictive maintenance, equipment health assessment, and early fault detection.</p><p>Collect vibration readings from pumps, motors, compressors, turbines, gearboxes, fans, blowers, and other rotating machinery. Ensure correct measurement locations, sensor placement, equipment identification, and data quality during inspections. Monitor equipment readings and identify abnormal vibration levels or changes in equipment condition. Upload and maintain accurate vibration data in the condition-monitoring database/software. Report abnormal readings or equipment conditions to the Condition Monitoring Engineer/Reliability team for further analysis. Follow approved inspection procedures, HSE requirements, and client standards during all field activities.</p><p><strong>Desired Candidate Profile</strong></p><p>ITI/Diploma in Mechanical Engineering or related technical field with 2 5 years of experience in vibration data collection/condition monitoring in Oil &amp; Gas, Petrochemical, Power Plant, or industrial facilities, preferably with ISO 18436 Vibration Analysis Category 2 certification.</p>

<p>To monitor and assess the condition and reliability of rotating equipment through vibration analysis and other predictive maintenance techniques, ensuring early fault detection and improved equipment performance.</p><p>Conduct condition monitoring and vibration data collection for rotating equipment such as pumps, compressors, motors, turbines, gearboxes, fans, and blowers. Analyse vibration spectra, waveforms, trends, and other condition-monitoring data to identify developing machinery faults. Diagnose issues such as unbalance, misalignment, looseness, bearing defects, gear defects, and resonance. Monitor equipment condition trends and provide timely recommendations for corrective and preventive maintenance. Prepare technical condition-monitoring reports and communicate findings to maintenance and reliability teams. Support troubleshooting, root-cause analysis, and failure investigations of critical rotating equipment. Maintain accurate condition-monitoring records and ensure activities comply with relevant HSE procedures, industry standards, and client requirements.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s/Diploma in Mechanical Engineering or related field with 5 10 years of relevant Oil &amp; Gas/industrial experience, preferably with ISO 18436 Vibration Analysis Category II or equivalent certification.</p>

<p>The QC Coating Inspector is responsible for inspecting surface preparation and coating application activities to ensure compliance with project specifications, international standards, and client requirements in oil &amp; gas, refinery, petrochemical, and pipeline projects.</p><h4>Roles &amp; Responsibilities</h4><ul><li>Inspect surface preparation activities including blasting and cleaning</li><li>Verify environmental conditions prior to coating application</li><li>Monitor coating application processes and ensure compliance with approved procedures</li><li>Conduct DFT (Dry Film Thickness), holiday testing, adhesion testing, and visual inspections</li><li>Ensure compliance with SAEP-316 and project specifications</li><li>Identify and report non-conformities and follow up on corrective actions</li><li>Prepare inspection reports and maintain QA/QC documentation</li><li>Coordinate with contractors, QA/QC teams, and client inspectors</li></ul><p><strong>Desired Candidate Profile</strong></p><h4>Mandatory Requirements</h4><ul><li>B.S. Degree in Engineering with minimum 5 years of relevant inspection experience OR Industrial/Technical Diploma with minimum 810 years of relevant inspection experience in oil &amp; gas / refinery / petrochemical / pipeline projects</li><li>Valid certification: CSWIP-BGAS Level 2 / NACE Level 2 / Equivalent</li><li>Qualified as per SAEP-316 requirements</li><li>Demonstrated experience in all phases of critical coating applications</li><li>Valid driving license (Mandatory)</li></ul>

<ul><li>Perform Non-Destructive Testing (NDT) on various materials and components using multiple methods, ensuring adherence to established procedures and specifications for accurate defect detection.</li><li>Calibrate and maintain NDT equipment, ensuring optimal performance and accuracy, while troubleshooting and resolving any technical issues promptly.</li><li>Interpret test results, evaluate findings against acceptance criteria, and generate detailed reports, providing clear and concise documentation of inspections.</li><li>Conduct inspections on a variety of assets, including but not limited to welds, castings, forgings, and composite materials, to identify internal and external imperfections.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Possess a high school diploma or equivalent, with a preference for candidates holding an associate's degree in a related technical field.</li><li>Hold relevant NDT certifications (e.g., ASNT Level II/III) in multiple methods (e.g., UT, RT, MT, PT, ET), demonstrating proficiency in various inspection techniques.</li><li>Demonstrate a minimum of 3-5 years of hands-on experience in NDT, showcasing a strong understanding of inspection principles and practices.</li><li>Exhibit experience in the aerospace, oil and gas, or manufacturing industries, indicating familiarity with industry-specific standards and requirements.</li></ul>

<p><strong>JOB PURPOSE</strong></p><p>The Maintenance Planner plans and schedules maintenance activities to maximize equipment availability while meeting production requirements. The role prepares weekly, daily, preventive, and predictive maintenance plans, defines job scope and resources for work orders, and coordinates with Production, Operations, Warehouse, and HSE to ensure planned work is executed safely and recorded accurately in SAP PM.</p><p><br></p><p><strong>KEY ACCOUNTABILITIES</strong></p><p><strong>Maintenance Planning &amp; Scheduling</strong></p><ul><li>Develop weekly and daily maintenance plans based on production requirements.</li><li>Prepare preventive and predictive maintenance schedules.</li><li>Prepare manpower schedules and record manpower hours.</li></ul><p><strong>Work Order Planning &amp; Prioritization</strong></p><ul><li>Plan corrective maintenance work orders based on priority and equipment criticality.</li><li>Define job scope, manpower, tools, spare parts, materials, and estimated duration.</li><li>Prioritize work orders based on safety, production impact, equipment criticality, and urgency.</li></ul><p><strong>Cross-Functional Coordination</strong></p><ul><li>Coordinate maintenance activities with Production, Operations, Warehouse, and HSE.</li><li>Coordinate spare parts and material availability ahead of planned jobs.</li><li>Align planned work with production windows to minimize downtime.</li></ul><p><strong>Work Order Closure &amp; Maintenance Records</strong></p><ul><li>Close completed work orders in SAP PM.</li><li>Ensure maintenance history is properly recorded in SAP PM.</li><li>Track planning performance, such as schedule compliance and work order backlog.</li></ul><p><br></p><p><strong>QUALIFICATIONS &amp; EXPERIENCE</strong></p><ul><li>Bachelor's degree or diploma in Mechanical, Electrical, or a related engineering discipline.</li><li>3–5 years of experience in maintenance planning and scheduling in an industrial or manufacturing environment.</li></ul>

Job Purpose: <br><br>The QA/QC Engineer is responsible for ensuring that all project activities, materials, and deliverables comply with applicable quality standards, specifications, codes, and contractual requirements. The role involves developing and implementing quality control procedures, conducting inspections and audits, and driving continuous improvement across all project phases.<br><br>Responsibilities: <br><br>Develop, implement, and maintain the project Quality Management System (QMS) in line with ISO 9001 and relevant industry standards Prepare and update Inspection and Test Plans (ITPs), quality control procedures, and method statements Conduct site/factory inspections at key stages (material receipt, in-process, and final inspection) to verify compliance with drawings and specifications Review and approve material submittals, shop drawings, and subcontractor quality documentation Witness and coordinate third-party inspections, testing, and certifications as required Identify non-conformances, raise Non-Conformance Reports (NCRs), and track corrective and preventive actions (CAPA) to closure Conduct internal audits and support external/client audits; prepare audit reports and follow up on findings Maintain accurate quality records, inspection reports, test certificates, and traceability documentation Liaise with project management, engineering, procurement, and site teams to resolve quality issues promptly Support root cause analysis for recurring quality issues and recommend process improvements Ensure compliance with client specifications, codes (e.g., ASME, ASTM, API, BS, EN) and statutory/regulatory requirements Conduct training and toolbox talks to promote quality awareness among site/production personnel Compile quality metrics/KPIs and prepare periodic quality performance reports for management<br><br>Requirements<br><br>Education requirements: Bachelor's degree in Engineering (Civil, Mechanical, Electrical, Industrial, or related discipline).<br><br>Certification Requirements: ISO 9001:2015 Lead Auditor / Internal Auditor certification (preferred).<br><br>Experience: 3-8 years of relevant QA/QC experience in construction, manufacturing.<br><br>Languages: Arabic (Fluent), English (Professional).<br><br>Technical Skills: <br><br>Working knowledge of ISO 9001:2015 Quality Management System requirements and documentation Proficient in reading and interpreting engineering drawings, P&IDs, GA drawings, and technical specifications Knowledge of material testing methods

<strong>Job Purpose<br><br></strong>Carry out all operational activities through DCS and keep continuous controlling &amp; monitoring operating parameters and alarms of Desal/SWC and all related systems and take appropriate action to correct deviations to ensure continuity of operations and production of water and seawater supply in a safe and reliable manner.<br><br><strong>Key Duties &amp; Responsibility<br><br></strong><ul><li> Shift take over – review with outgoing shift control operator the activities of the previous shift such as, tripping, shut-downs, start-ups, deviations from normal operating standards, etc. to ensure that continuing problems are handled as necessary.</li><li> Review logbook from previous shift and fill log sheets and other assigned sheets to determine condition/status of each unit. Check parameters, alarms, unit load, take corrective action in respect of deviations according to established procedures and report to Shift supervisor for further advice and action.</li><li>Check and record readings, alarms, process parameters, electrical network etc. for plant/system/equipment and related auxiliaries and report abnormalities or deviations to shift supervisor for advice and further action.</li><li>Follow all relevant safety, quality and environmental control procedures and instructions so that personal safety of others is not jeopardized, and a minimum level of product/service and environmental impact can be guarantee.</li><li>Continuous monitoring for parameters and alarms of Desal/SWC and all related systems and take appropriate action to correct deviations to ensure continuity of operations and production of water and seawater</li><li>Conduct routine equipment/system check, all routine tests and change over, routine test in coordination with field operator, supervisor and all related parties, and fill/maintain record.</li><li>Coordinate/isolate with Field Operators and shift supervisor to resolve deviations from normal standards and problems on the plant electrical systems including isolation of equipment and auxiliaries, operating the electrical system, switching operation of the network.</li><li>Communicate and coordinate with all internal/external parties to maintain and control interfaces and resources supply such as water, seawater, steam, chemical, condensate return, process air etc.</li><li>Act and response to emergency situations; take appropriate steps to stabilize the problem as much as possible while simultaneously informing shift supervisor and other parties as indicated in the procedures to safeguard the unit.</li><li>Ensure compliance with regulations, standard and procedures, provide feedback and recommendation for improvement where necessary.</li><li>Maintain accurate and detailed reports including plant status, main activities and incidents and report any deviations, abnormalities, or issues and keep as a reference.</li><li>Participate and provide support to train new control room operator, insure knowledge and experience transfer to maintain high level of capability.</li><li>Maintain proper housekeeping in Control Room and insure all desk facility proper working.</li><li>Review and analyze laboratory reports to verify compliance with water quality standards, identify any deviations, and implement corrective actions as necessary.</li><li>Conduct regular assessments of equipment availability and prepare weekly reports outlining non-functional equipment, identifying underlying issues, and proposing solutions to ensure optimal operational efficiency.<br><br></li></ul><strong>Minimum Experience Requirements<br><br></strong><ul><li>4 years’ relevant plant operational experience in a large industrial environment for a Diploma holder, OR</li><li>6 – 8 years’ relevant plant operational experience in a large industrial environment for a High School graduate.</li><li>2 years’ Field Operator experience.<br><br></li></ul><strong>Professional Certification(s)<br><br></strong>N/A

<p>We are seeking an experienced Electrical Inspector with years of expertise in electrical inspections and compliance. The successful candidate will play a crucial role in ensuring that electrical systems meet regulatory standards, project specifications, and industry best practices.</p><p><b><br></b></p><p><b>Responsibilities:</b></p><ul><li>Conduct thorough inspections of electrical installations to ensure compliance with local regulations, national codes, and project specifications.</li><li>Verify that work is carried out in accordance with approved electrical designs.</li><li>Implement and maintain quality control processes to ensure the integrity of electrical systems.</li><li>Identify and address any deviations from approved plans.</li><li>Create detailed inspection reports outlining findings, deviations, and corrective actions.</li><li>Maintain accurate and organized records of inspections.</li><li>Collaborate with electrical contractors, project managers, and other stakeholders to facilitate efficient inspections.</li><li>Provide guidance on meeting electrical requirements during construction.</li><li>Oversee electrical testing and commissioning activities to ensure proper functionality of systems.</li><li>Verify the performance of electrical components and equipment.</li><li>Ensure that all electrical work meets safety standards and regulations.</li><li>Identify and address safety hazards related to electrical installations.</li><li>Communicate inspection results to clients, project teams, and relevant authorities.</li><li>Provide guidance on addressing any non-compliance issues.</li><li>Stay updated on industry trends, electrical codes, and emerging technologies.</li><li>Recommend improvements to enhance the efficiency and safety of electrical installations.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor or Diploma in Electrical Engineering.</li><li>Minimum of 5 years of experience as an Electrical Inspector, with a focus on construction projects.</li><li>In-depth knowledge of electrical codes, regulations, and industry standards.</li><li>Strong analytical and problem-solving skills.</li><li>Excellent communication and interpersonal skills.</li><li>Proficient in using electrical testing equipment.</li><li>Professional certification as an Electrical Inspector.</li><li>Experience with a variety of electrical systems, including commercial, residential, and industrial projects.</li></ul>

<p>The QA/QC Engineer will join Napesco, providing technical leadership for quality assurance and control across all service and manufacturing activities. The role ensures compliance with API, ISO, and client specifications, drives continuous improvement, and supports audits and vendor management.</p><p>Develop, implement, and maintain QA/QC procedures, inspection plans, and documentation per API, ISO, and client requirements. Perform in process and final inspections of tools, equipment, and assemblies for TRS, GYRO, DHT, and manufacturing operations. Supervise all stages of service maintenance, including NDT inspections, ensuring compliance. Conduct dimensional verification, functional test witnessing, and visual inspections using calibrated tools. Ensure equipment and tools are tagged, labeled, and traceable at each stage per company and client standards. Review and verify certification packages, inspection reports, and traceability records before delivery or mobilization. Report non conformities, participate in root cause analysis, and implement corrective actions. Collaborate with operations, maintenance, and engineering teams to resolve quality issues and drive continuous improvement. Monitor vendor and subcontractor performance against purchase and quality requirements. Support internal/external audits, client inspections, and maintain audit ready documentation and records.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree or diploma in Mechanical, Industrial, Quality Engineering, or related technical discipline. Fresh graduates are welcome; candidates with 3 years oil and gas experience preferred. Knowledge of API Q1, ISO 9001, API 5CT, 7 1, 6A, and related oilfield service specifications. ISO 9001:2015 Internal Auditor certification (preferred). Familiarity with NDT inspection methods and equipment. Ability to read and interpret engineering drawings and specifications. Proficiency with calibrated measurement tools and documentation software. Strong analytical, problem solving, and root cause analysis skills. Excellent communication and teamwork abilities. Commitment to maintaining accurate quality records in line with company retention policy.</p>

<p><strong>Company Description</strong> Faris And Orhaan Contracting Company is a construction and contracting firm operating in Al Madinah Al Munawwarah and the surrounding region. The company delivers projects across residential, commercial, and infrastructure sectors, with a focus on quality workmanship and reliable service. Teams work closely with clients, consultants, and suppliers to ensure projects are completed safely, on time, and within budget. The company values technical competence, adherence to safety standards, and collaborative problem-solving on-site.</p><p><strong>Role Description</strong> The Electrical Technician is a full-time, on-site role based in Al Madinah Al Munawwarah. The role involves installing, maintaining, and repairing electrical systems and equipment on construction and operational sites, including wiring, panels, lighting, and control systems. Day-to-day tasks include performing routine electrical maintenance, diagnosing faults, troubleshooting issues, and implementing corrective actions in compliance with relevant codes and safety regulations. The Electrical Technician will read and interpret electrical drawings and schematics, coordinate with engineers, supervisors, and other trades, and document work performed and materials used. The role also requires supporting site inspections, adhering to company safety procedures, and responding to urgent electrical issues as needed.</p><p><strong>Qualifications</strong></p><p> </p><ul><li>Strong skills in Electrical Maintenance and hands-on work with Electrical Equipment across construction or industrial environments.</li><li>Solid understanding of Electricity principles and basic Electrical Engineering concepts relevant to installation and repair.</li><li>Proficiency in Troubleshooting electrical faults, identifying root causes, and applying effective corrective solutions.</li><li>Experience reading and interpreting electrical diagrams, schematics, and technical documentation.</li><li>Vocational diploma, technical certificate, or equivalent qualification in Electrical Technology or a related field.</li><li>Knowledge of local electrical codes, safety regulations, and best practices for safe work on energized and de-energized systems.</li><li>Ability to use standard electrical tools, testing instruments, and measurement devices accurately.</li><li>Effective communication skills and ability to collaborate with multidisciplinary site teams and supervisors.</li><li>Previous experience as an Electrical Technician or similar role in contracting, construction, or facilities maintenance is preferred.</li><li>Commitment to safety, reliability, and maintaining high-quality standards in all assigned tasks.</li></ul>

<p>Job Description: Job Description Position: CAD/CAM Programmer / CAD/CAM Technician Location Kingdom of Saudi Arabia Department Engineering / Manufacturing Reporting To Engineering Manager / Operations Head</p><p>Position Summary The CAD/CAM Programmer will be responsible for creating optimized CNC machining programs for complex precision components used in Oil &amp; Gas applications. The role includes developing machining strategies, preparing manufacturing drawings, generating tool paths, selecting cutting tools, and supporting production teams to ensure efficient, high-quality manufacturing withminimal cycle time.</p><p>Key Responsibilities</p><p>CAD/CAM Programming</p><ul><li>Develop CNC programs for 3-axis, 4-axis, and 5-axis CNC machining centers.</li><li>Generate machining tool paths using CAD/CAM software.</li><li>Create manufacturing drawings and machining process documentation.</li><li>Optimize machining strategies to improve productivity and reduce cycle times.</li><li>Verify machining programs through simulation before production.</li><li>Prepare setup sheets, tooling lists, and work instructions.</li></ul><p>Engineering Support</p><ul><li>Interpret customer drawings, GD&amp;T, and engineering specifications.</li><li>Prepare machining methods for new and existing components.</li><li>Support reverse engineering activities whenever required.</li><li>Coordinate with Production, Quality, and Planning teams.</li><li>Resolve machining and programming issues during production.</li><li>Assist in tooling selection and fixture design.</li></ul><p>Process Improvement</p><ul><li>Reduce machining cycle time.</li><li>Improve tool life and machining efficiency.</li><li>Standardize machining programs and documentation.</li><li>Support Lean Manufacturing and Continuous Improvement initiatives.</li><li>Participate in root cause analysis for machining-related issues.</li></ul><p>Documentation</p><ul><li>Maintain revision-controlled CNC programs.</li><li>Update machining documentation and engineering records.</li><li>Ensure program backups are maintained.</li><li>Maintain engineering databases and drawing records.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Qualification Diploma or Bachelor's Degree in Mechanical Engineering, Tool Engineering, Manufacturing Engineering, or equivalent. CAD/CAM certification will be an added advantage.</p><p>Experience 5 10 years of experience in CNC Programming 5 10 years of experience in CNC Programming and CAD/CAM. Experience in precision machining for Oil &amp; Gas, Aerospace, Heavy Engineering, or Energy industries. Experience in remanufacturing of critical components is highly preferred. Hands-on experience in multi-axis CNC machining.</p><p>Technical Skills</p><p>CAD Software AutoCAD SolidWorks Inventor (Preferred)</p>

Job Summary: Obeikan Glass Company is seeking a skilled and experienced Furnace Operator to join our Float Glass Production team. The candidate will be responsible for operating and monitoring the float glass furnace to ensure safe, stable, and efficient production while maintaining optimal furnace conditions and product quality. The ideal candidate should have a minimum of 5 years of experience in the float glass manufacturing industry, with hands-on experience in furnace operations and DCS-controlled systems.<br>Key Responsibilities:Operate and monitor the float glass furnace to ensure safe, stable, and efficient production. Monitor and control furnace operating parameters, including temperature, pressure, gas emissions, glass level, natural gas firing, reversal, and associated DCS process indicators. Adjust furnace controls to maintain optimal operating conditions and consistent product quality. Conduct routine field inspections, identify abnormalities, and promptly report equipment or process issues. Respond effectively to operational incidents and follow established emergency procedures. Perform basic autonomous maintenance activities and support both planned and unplanned maintenance interventions. Accurately record operating data, furnace parameters, and shift activities while ensuring effective shift handovers. Adhere to company Health, Safety, Environment (HSE), quality, and 5S standards, reporting near misses and unsafe conditions. Collaborate with shift teams to achieve production, quality, and operational performance targets. Qualifications:Diploma in Mechanical Engineering, Electrical Engineering, Chemical Engineering, Industrial Engineering, or a related technical discipline. Minimum 5 years of experience as a Furnace Operator in a Float Glass Manufacturing plant. Required Skills:Strong knowledge of float glass furnace operations. Experience with DCS operation and process monitoring. Understanding of combustion systems, natural gas firing, and furnace temperature control. Process troubleshooting and analytical problem-solving skills. Preventive and autonomous maintenance knowledge. Strong attention to detail and operational discipline. Effective communication and teamwork skills. Knowledge of HSE, 5S, and continuous improvement practices. Ability to work efficiently under pressure in a manufacturing environment.