Heavy equipment mechanical engineer Jobs - Al Ahsa Saudi

<p>Heavy Equipment &amp; Plant Operators – Multiple Positions</p><p><strong>Saudi Nationals | Dammam</strong></p><p><strong>Salary upto 7,425 SAR per month + standard company benefits</strong></p><p><br></p><p>We are supporting a <strong>well-established Saudi group headquartered in Dammam</strong> with a major expansion of its Saudi workforce.</p><p><br></p><p>The Group currently employs approximately <strong>4,000 people</strong> and has ambitious plans to grow to around <strong>10,000 employees over the next five years</strong>. As part of this growth, we are hiring experienced <strong>Heavy Equipment &amp; Plant Operators</strong> across multiple equipment categories.</p><p><br></p><p><strong><u>Positions Available</u></strong></p><p>We are interested in Saudi operators with experience across:</p><ul><li><strong>Crane Operations</strong></li><li><strong>Forklift Operations</strong></li><li><strong>Excavators</strong></li><li><strong>Bulldozers / Dozers</strong></li><li><strong>Wheel Loaders</strong></li><li><strong>Motor Graders</strong></li><li><strong>JCB / Backhoe Loaders</strong></li><li><strong>Bobcat / Skid-Steer Loaders</strong></li><li><strong>Rollers / Compactors</strong></li><li><strong>Telehandlers / Telescopic Forklifts</strong></li><li><strong>Manlifts / MEWPs</strong></li><li><strong>Other Heavy Equipment / Specialist Operator positions</strong></li></ul><p><br></p><p>Candidates will be assessed and matched to the most appropriate position based on their <strong>equipment experience, licence/certification and level of competency</strong>.</p><p><br></p><p><strong><u>What We're Looking For</u></strong></p><ul><li><strong>Saudi national – mandatory</strong></li><li>Previous hands-on experience operating the relevant heavy equipment or plant</li><li>Valid <strong>operator licence/certificate</strong> relevant to the equipment operated</li><li>Good understanding of <strong>pre-operational inspections and basic equipment checks</strong></li><li>Strong awareness of <strong>HSE and safe operating procedures</strong></li><li>Ability to work within site and operational environments</li><li>Willing and able to work in <strong>Dammam</strong></li><li>Able to provide copies of relevant <strong>operator licences and certificates</strong></li></ul><p><br></p><p>Experience operating equipment within <strong>construction, heavy equipment, oil &amp; gas, industrial, infrastructure or major project environments</strong> would be advantageous.</p><p><br></p><p><strong><u>Salary &amp; Benefits</u></strong></p><p><strong>Up to approximately SAR 7,425 per month total package</strong>, depending on the specific equipment category, experience and licences/certifications held.</p><p><br></p><p><strong><u>Location</u></strong></p><p><strong>Dammam, Saudi Arabia</strong></p><p><br></p><p><strong><u>Why Join?</u></strong></p><p>This is an opportunity to join a <strong>large and established Saudi group during a significant period of growth and transformation</strong>.</p><p><br></p><p>With approximately <strong>4,000 employees today and plans to grow to around 10,000 over the next five years</strong>, the business is making a substantial investment in expanding and developing its Saudi workforce.</p><p><br></p><p><strong><u>How to Apply</u></strong></p><p>If you are a <strong>Saudi national</strong> with professional experience operating heavy equipment or plant, please apply with your updated CV.</p><p>When applying, please make sure you clearly state:</p><p><strong>1. Which equipment you operate</strong></p><p><strong>2. How many years of experience you have on each type</strong></p><p><strong>3. Which valid operator licences/certificates you hold</strong></p><p><br></p><p>Shortlisted candidates will be required to provide <strong>copies of their relevant licences/certifications</strong> as part of the screening process.</p><p><br></p><p><strong>Saudi nationals only.</strong></p>

Key Responsibilities:<br>I&C Installation Inspection Inspect installation of field instruments, transmitters, switches, gauges, control valves, analyzers and related equipment. Inspect instrument tubing, impulse lines, manifolds and fittings. Inspect cable trays, conduits, junction boxes and instrument marshalling cabinets. Verify installation, tagging, orientation, accessibility and identification of instruments. Inspect instrument and control cables, including routing, termination, glanding and earthing. Inspect installation of PLC/DCS/ESD panels, cabinets and associated equipment. Verify installation against approved IFC drawings, P&IDs, instrument index and cable schedules.<br>Quality Control & ITPPerform inspections in accordance with approved ITPs, checklists and method statements. Conduct Hold Point, Witness Point and surveillance inspections as required. Verify that construction activities comply with approved project specifications and procedures. Review inspection requests (IRs) and verify readiness before inspection. Raise and follow up NCRs, observations and punch items where required. Verify corrective actions and close-out of quality findings.<br>Testing & Calibration Witness and verify calibration of pressure, temperature, flow and level instruments. Inspect continuity, insulation resistance and loop testing. Witness instrument loop checks from field devices to DCS/PLC/ESD systems. Verify functional testing of control valves, actuators and associated accessories. Witness testing of alarms, interlocks, trips and shutdown systems where applicable. Verify calibration certificates and test records.<br>Documentation:Review inspection and test records for completeness and compliance. Maintain inspection reports, calibration records, test certificates and checklists. Verify As-Built drawings and red-line markups. Maintain I&C quality dossiers and turnover documentation. Support preparation of Mechanical Completion and Commissioning dossiers. Ensure traceability of instruments and equipment through tagging and documentation.<br>CCGT-Specific Responsibilities The Inspector may be required to cover I&C installations associated with:Gas Turbine and Generator systems HRSG systems Steam Turbine and Generator DCS / PLC / ESD systems Gas and steam systems Water Treatment and Demineralization Cooling Water systems Condensate and Feedwater systems Fuel Gas systems Electrical protection/control interfaces Plant auxiliary systems Fire & Gas systems CEMS / environmental monitoring systems Balance of Plant (BOP) instrumentation.<br>Standards & Requirements Ensure compliance with applicable:Project specifications and Employer/Owner requirements Approved IFC drawings and P&IDsInstrument Datasheets and Instrument Index ITPs and Method Statements IEC standards ISA standards API standards where applicable NFPA requirements where applicable NEC/local electrical requirements where applicable Manufacturer/vendor requirements EPC Contractor QA/QC procedures<br>Coordination:Coordinate daily with I&C construction engineers, supervisors and subcontractors. Interface with EPC QA/QC Engineers and Owner/PMC inspectors. Coordinate with commissioning and pre-commissioning teams. Participate in quality meetings and inspection coordination meetings. Support resolution of technical and quality issues at site. Ensure timely inspection and release of completed works.<br>Minimum Qualifications Diploma or Bachelor's degree in Instrumentation, Control Engineering, Electronics, 2. Electrical Engineering, or related discipline. Typically 5–8 years of relevant QA/QC experience, preferably in power generation or CCGT projects. Experience in large-scale power plant construction is highly desirable. Strong knowledge of instrumentation installation, calibration, loop checking and control systems. Experience working with EPC contractors and Owner/PMC inspection teams.<br>Required Competencies Strong knowledge of I&C construction and inspection activities. Ability to read and interpret P&IDs, Instrument Datasheets, Loop Diagrams, Wiring Diagrams, Cable Schedules and Hook-up Drawings. Knowledge of DCS, PLC and ESD systems. Knowledge of instrument calibration and testing. Strong NCR and punch-list management skills. Good understanding of QA/QC documentation and turnover requirements. Strong communication and coordination skills. Ability to work effectively in a fast-paced construction environment. Good knowledge of MS Office and relevant QA/QC systems.

<p>We are looking for an experienced and motivated Equipment / Vehicle Operations & Business Development Coordinator to join our team in Saudi Arabia.</p><p>The candidate will be responsible for coordinating heavy equipment and vehicles, managing equipment requirements and deployment, dealing directly with clients, negotiating rental rates and commercial terms, and coordinating with equipment owners and suppliers.</p><p>Key Responsibilities:</p><ul><li><p>Coordinate heavy equipment, vehicles and transportation operations.</p></li><li><p>Manage equipment requirements, availability and deployment.</p></li><li><p>Develop and maintain strong relationships with clients and equipment suppliers.</p></li><li><p>Communicate directly with clients and negotiate prices and commercial terms.</p></li><li><p>Source equipment and obtain competitive rental rates.</p></li><li><p>Prepare and follow up on quotations, contracts, POs and invoices.</p></li><li><p>Develop new clients and identify new business opportunities.</p></li><li><p>Monitor equipment utilization, operational performance and profitability.</p></li><li><p>Handle day-to-day operational and coordination matters.</p></li><li><p>Support business development and achieve company targets.</p></li></ul><p>Requirements:</p><ul><li><p>2–5 years of relevant Saudi experience in heavy equipment, transportation, construction or equipment rental/operations.</p></li><li><p>Strong client-handling, negotiation and communication skills.</p></li><li><p>Good knowledge of the Saudi market.</p></li><li><p>Arabic, English, Hindi and Urdu are mandatory.</p></li><li><p>Transferable Iqama with at least 3 months validity.</p></li><li><p>Ability to work independently and manage multiple tasks.</p></li><li><p>Saudi Driving License is preferred.</p></li></ul><p>Salary is negotiable and will be discussed based on experience and qualifications. Performance-based incentives/commission may be offered based on business development, client acquisition, equipment utilization and profitability.</p><p>Only candidates who meet the relevant Saudi experience and all four language requirements will be considered.</p><p><strong>Desired Candidate Profile</strong></p><p>Skills:</p><ul><li><p>Strong communication and interpersonal skills</p></li><li><p>Excellent client handling and negotiation skills</p></li><li><p>Strong business development and sales skills</p></li><li><p>Good knowledge of heavy equipment, vehicles and transportation operations</p></li><li><p>Ability to coordinate with clients, equipment owners and suppliers</p></li><li><p>Strong commercial awareness and problem-solving skills</p></li><li><p>Ability to work independently and achieve business targets</p></li></ul><p>Experience:</p><ul><li><p>2–5 years of relevant experience in Saudi Arabia</p></li><li><p>Experience in Heavy Equipment, Equipment Rental, Transportation or Construction</p></li><li><p>Previous experience in client management, equipment coordination or business development is preferred</p></li></ul><p>Languages:</p><ul><li><p>Arabic – Mandatory</p></li><li><p>English – Mandatory</p></li><li><p>Hindi – Mandatory</p></li><li><p>Urdu – Mandatory</p></li></ul><p>Qualifications:</p><ul><li><p>High School / Diploma or equivalent</p></li><li><p>Relevant professional experience will be given strong preference</p></li><li><p>Saudi Driving License is preferred</p></li><li><p>Transferable Iqama with minimum 3 months validity is required</p></li></ul>

<p>Electricians &amp; Auto Electricians – Multiple Positions</p><p><strong>Saudi Nationals | Eastern Province, Saudi Arabia</strong></p><p><br></p><p>We are supporting a <strong>well-established Saudi organisation</strong> with the continued expansion of its technical and maintenance operations in the Eastern Province.</p><p><br></p><p>As part of an ongoing recruitment programme, we are looking to hire experienced <strong>Electricians and Auto Electricians across multiple technical specialisms</strong>.</p><p><br></p><p>This is an opportunity to join an established operational environment working across <strong>vehicles, heavy equipment, machinery and associated electrical systems</strong>, with positions available for candidates at different levels of experience.</p><p><br></p><p><strong><u>Positions Available</u></strong></p><p>We are interested in Saudi candidates with experience across areas including:</p><ul><li><strong>Electricians</strong></li><li><strong>Senior Electricians</strong></li><li><strong>Heavy Equipment Auto Electricians</strong></li><li><strong>Senior Heavy Equipment Auto Electricians</strong></li><li><strong>Heavy Truck Auto Electricians</strong></li><li><strong>Senior Heavy Truck Auto Electricians</strong></li><li><strong>Crane Auto Electricians</strong></li><li><strong>Senior Crane Auto Electricians</strong></li><li><strong>Light Equipment Auto Electricians</strong></li><li><strong>Senior Light Equipment Auto Electricians</strong></li></ul><p><br></p><p>Candidates will be assessed and matched to the most appropriate position based on their <strong>technical experience, equipment specialism and level of competency</strong>.</p><p><br></p><p><strong><u>What We're Looking For</u></strong></p><ul><li><strong>Saudi national – mandatory</strong></li><li>Relevant hands-on electrical or auto-electrical experience</li><li>Electrical, Auto-Electrical, Electromechanical or other relevant <strong>technical qualification/trade certification</strong></li><li>Experience in <strong>fault finding, diagnostics, repair and preventive maintenance</strong></li><li>Ability to understand electrical systems, wiring and components relevant to your specialism</li><li>Strong understanding of <strong>HSE and safe working procedures</strong></li><li>Ability to work within workshop, field and operational environments</li><li>Able to provide copies of relevant <strong>technical qualifications and certifications</strong></li></ul><p><br></p><p>For Auto Electrician positions, experience working with systems such as <strong>starters, alternators, batteries, wiring, sensors, control modules/ECUs and electrical fault diagnosis</strong> would be particularly relevant.</p><p><br></p><p>Experience within <strong>heavy equipment, transportation, fleet, automotive, construction, industrial, oil &amp; gas or major project environments</strong> would be advantageous.</p><p><br></p><p>Successful candidates will have the opportunity to work within an established operational environment alongside experienced maintenance and technical teams supporting a diverse range of equipment and assets.</p><p><br></p><p>We are interested in candidates at different stages of their careers, from experienced <strong>Electricians and Auto Electricians through to Senior-level specialists</strong>.</p><p><br></p><p><strong><u>How to Apply</u></strong></p><p>If you are a <strong>Saudi national</strong> with professional electrical or auto-electrical experience, please apply with your updated CV.</p><p>Please make sure your CV clearly shows:</p><p><strong>• Your electrical/auto-electrical specialism</strong></p><p><strong>• The vehicles, equipment or systems you have worked on</strong></p><p><strong>• Your years of relevant experience</strong></p><p><strong>• Your technical qualifications and certifications</strong></p><p><br></p><p><strong>Saudi nationals only.</strong></p>

Position Summary We are seeking a skilled and detail-oriented Pipe Fabricator to join our technical team. The successful candidate will be responsible for selecting, measuring, cutting, threading, bending, and assembling piping systems and structural components according to strict isometric blueprints and industrial safety specifications. <br>Key Responsibilities & Duties Blueprint Reading: Interpret and analyze advanced isometric drawings, piping layouts, blueprints, and weld maps to determine accurate dimensions, material requirements, and assembly sequences. Layout & Fit-Up: Measure, mark, layout, and fit pipes and components precisely to ensure alignment, correct angles, and compliance with project tolerances before final welding. Cutting & Preparation: Utilize industrial tools (including torches, plasma cutters, saws, beveling machines, and grinders) to cut, thread, groove, and bevel piping materials. Material Handling: Work safely with a wide variety of piping materials, including carbon steel, stainless steel, alloy steel, and galvanized pipes. Tack-Welding: Perform secure tack-welding to temporarily hold pieces in position for structural integrity prior to final production welding. Quality & Safety Assurance: Perform quality self-checks using calipers, gauges, and tape measures. Adhere strictly to plant safety guidelines, Lock-Out/Tag-Out (LOTO) protocols, and PPE compliance. <br>Job Requirements & Qualifications Education & Certifications Minimum Requirement: High School Diploma, Technical School Certificate, or ITI (Industrial Training Institute) credential in Pipe Fabrication, Structural Fitting, or Mechanical Trades. Preferred: Valid industry certifications or third-party approvals (e.g., Aramco-approved or TUV certified testing status is a strong asset).<br>Experience Minimum 5 years of verifiable experience as a Pipe Fabricator within the Oil & Gas, Petrochemical, Refinery, or Heavy Industrial Construction fields.<br>Technical Expertise & Skills Proficient in reading and translating complex isometric drawings and mechanical schematics. Expert handling of fabrication hand tools, shop machinery, and measurement instruments. Good understanding of welding symbols, joint configurations, and standard piping specifications (ASME/ANSI codes). Strong spatial reasoning, mathematical capability (for calculating angles and offsets), and manual dexterity. Basic command of the English language (spoken and readable technical instructions).

ENGIE SOLUTIONS MIDDLE EASTENGIE Solutions is part of the ENGIE Group, a global reference in low-carbon energy and services, with more than 96,000 employees. At ENGIE Solutions, we believe in providing solutions, not just services. We bring to the table integrated, tailor-made, financed, technology-enabled, and data-driven facility management solutions that improve energy and asset performance for cities, communities, industries, and properties. The company is committed to investing in countries through empowering the local workforce, implementing smart technology solutions and know-how, and delivering financed and guaranteed energy-efficient projects for our customers.<br>All interested applicants can email their CVs to careers.escl@dhowsolutions.com with a subject line of “Data Center Medium Voltage Technician” mentioning their availability.<br>Industry: Facilities Management Job Title: Data Center Medium Voltage Technician Position Reports to: Data Center Electrical Engineer Location: Dammam, Saudi Arabia<br>SUMMARY: Data Center Medium Voltage (MV) Technician operates, maintains, and repairs critical electrical distribution systems (11 k V to 33 k V) to guarantee 100% uptime. Responsibilities include maintaining switchgear, transformers, and generators, executing strict Lockout/Tagout (LOTO) protocols, and tracking performance via CAFM.<br>PRIMARY FUNCTIONS AND ESSENTIAL RESPONSIBILITIES:Monitor, operate, and troubleshoot MV switchgear, ring main units (RMUs), circuit breakers, and protection relays. Perform routine maintenance on transformers, generators, and distribution cabling to prevent critical facility outages. Conduct specialized electrical testing such as insulation resistance, Hi-Pot, contact resistance, and relay calibration tests. Strictly adhere to electrical safety standards, Lockout/Tagout (LOTO) procedures. Respond immediately to emergency power issues, alarms, or abnormal conditions within the data center's critical power chain. Log all maintenance hours, observations, and parts usage into the CAFM. Responsible for performing daily performance monitoring of electrical equipment during walk rounds. Responsible for following SOPs and EOPs during preventive and corrective maintenance.<br>EDUCATION / CERTIFICATION / KNOWLEDGE:Diploma in Electrical Engineering Deep understanding of critical power infrastructures, including UPS systems, standby generators, and ATS (Automatic Transfer Switches). Familiarity with electrical diagnostic testing, fault analysis, and troubleshooting procedures Very familiar with Health & Safety guidelines and procedures, especially for operating energized or mechanical equipment.<br>EXPERIENCE:5+ years of experience working with industrial or commercial medium/high voltage systems. Experience in preventive and corrective maintenance of MV equipment.<br>SKILLS/ABILITIES:Ability to read and interpret complex electrical schematics, one-line diagrams, and protection schemes. Strong analytical, troubleshooting, and problem-solving skills Good communication and teamwork abilities Ability to work a rotational on-call shift. Ability to work under pressure, adaptable. Ability to diagnose root cause of equipment failures.

Responsibilities<br><br> JOB DESCRIPTION <br><br>Maintenance Repair Work<br><br> Repairs & maintains, in accordance with diagrams, sketches, operation manuals & manufacturer’s specifications machineries & other mechanical equipment. Inspects & troubleshoots the problem. Dismantles devices to repair defective parts. Reports work done, remarks & parts used on the repair request form. Checks the bearing condition & other wear & tear. Replaces faulty Mechanical components of machines & equipment, such as bearing, chains, belts, pneumatic & Hydraulic Components, using proper equipment & hand tools. Performs & implements routine maintenance programs using appropriate tools & all related references. Carry out the calibration based on the calibration schedule. Logging the daily activities.<br><br>5s<br><br> Carry out, implement and maintain the 5S culture. Ensures that health & safety requirements are implemented throughout the plant; that employee health is adequately safeguarded from industrial hazards.<br><br>Authorities<br><br> Prepares & issues a needed spare parts voucher. Initiates & recommends modification or replacement of components & equipment which fail to meet acceptable operating standards. May direct, assist & train new or lower level technicians.

Who we are Founded in 1978, Al Marwan Group is a diversified organization serving the construction, heavy machinery, Oil & Gas, real estate, development and Hospitality sectors across the GCC. The Group operates through multiple business units and subsidiaries, delivering integrated solutions supported by strong operational expertise and a well-established regional presence.<br>Job Summary We are seeking a dynamic and results-driven Rental Sales Executive - Hindi Speaker with a solid background in heavy equipment rental within the Saudi Arabian market. The ideal candidate will be responsible for generating rental revenue, developing strong client relationships, identifying upcoming project opportunities, and promoting our fleet of heavy equipment to clients across the construction, infrastructure, mining, oil & gas, marine, and industrial sectors. This role requires extensive market knowledge, a well-established industry network, strong business development capabilities, and the ability to convert opportunities into long-term rental contracts while consistently achieving sales targets.<br>Key Responsibilities The key duties and responsibilities of the Rental Sales Executive include, but are not limited to:Identify, develop, and secure new rental business opportunities across construction, infrastructure, mining, marine, oil & gas, and industrial sectors within Saudi Arabia. Promote and sell heavy equipment rental solutions, including excavators, wheel loaders, bulldozers, dump trucks, crawler cranes, telehandlers, forklifts, manlifts, and other earthmoving and lifting equipment. Conduct regular client visits, site inspections, and project assessments to understand customer requirements and recommend suitable rental solutions. Build and maintain strong relationships with contractors, EPC companies, procurement teams, project managers, plant managers, rental coordinators, and key decision-makers. Prepare rental quotations, commercial proposals, tender submissions, and RFQ responses in accordance with company policies and commercial guidelines. Negotiate rental rates, contract terms, and service agreements to secure profitable long-term business. Coordinate with operations, workshop, transport, and logistics teams to ensure timely mobilization, demobilization, and customer satisfaction. Monitor market trends, competitor activities, pricing strategies, and upcoming projects to identify new business opportunities. Maintain accurate customer records, sales pipelines, opportunity tracking, and forecasting through the CRM system. Prepare and submit regular sales reports, business development updates, and market intelligence reports to management. Follow up on outstanding payments and support collection activities in coordination with the Finance Department. Achieve monthly, quarterly, and annual rental revenue targets in line with company objectives. Support cross-selling opportunities for equipment sales, spare parts, maintenance services, and long-term contractual agreements where applicable.<br>Required Skills & Qualifications Minimum 5 years of proven experience in heavy equipment rental sales within the Kingdom of Saudi Arabia. Strong understanding of construction, infrastructure, mining, marine, oil & gas, and industrial sectors. Well-established network with major contractors, EPC companies, mining operators, oil field contractors, and government-related entities across KSA. Comprehensive knowledge of heavy equipment applications, specifications, and rental solutions. Proven track record of achieving rental sales targets and securing long-term rental contracts. Strong negotiation, presentation, business development, and relationship management skills. Experience in handling tenders, RFQs, commercial proposals, and contract negotiations. Proficiency in CRM systems, sales pipeline management, Microsoft Office, and sales reporting tools. Excellent communication, customer service, and professional email writing skills in both Arabic and English. Valid KSA driving license and willingness to travel extensively throughout the Kingdom. Self-motivated, target-driven, and capable of working independently with minimal supervision.<br>Preferred Qualifications Hindi and English language proficiency is mandatory. Existing customer relationships and industry contacts within the KSA heavy equipment rental market will be a strong advantage. Previous experience dealing with major construction contractors, mining companies, EPC contractors, and industrial clients is highly desirable.<br>Work Location????Eastern Region, Kingdom of Saudi Arabia

Transafe Logistics LLC, part of Mazrui International - Trading Division, is seeking a dynamic and efficient Fleet and Safety Coordinator to join our Logistics Team based in Dammam in KSA.<br>Transafe Logistics LLC specializes in the transportation of Oxygen, Nitrogen, Argon, Carbon Dioxide, Helium, and Hydrogen gases. We’ve spent more than a decade transporting hazardous goods around the region . With headquarter in Dubai, our operation hubs are also based in Abu Dhabi, Qatar, Kuwait and Saudi Arabia.<br>Mazrui International is a diversified holding group with wide variety of businesses in Oil & Gas/Oilfield Services, Financial Investments, Real Estate, Construction, Retail, Trading, Distribution, Logistics, Transportation, Hospitality, Education etc.<br>Websites :-https://www.transafe.ae/ (Transafe Logistics)https://www.mazruiinternational.ae/ (Main Holding Group)<br>The job objective is for the efficient scheduling of deliveries, proper routing of trucks and monitoring and reporting of the fleet management system. The ideal candidate will have at least 4 years experience in the fleet management of Heavy duty Trucks carrying hazardous materials within KSA and cross border transportation.<br>Key Responsibilities/Duties :- Maintaining vehicles for deliveries. Developing efficient driver schedules to maximize profits. Managing drivers so they adhere to strict schedules. Registering and licensing all vehicles under their management. Finding ways to cut costs and maximize profits. Developing strategies for greater fuel efficiency. Maintaining detailed records of vehicle servicing and inspection. Complying with country laws and regulations. Scheduling regular vehicle maintenance to ensure operational efficiency. Ensuring strict servicing and maintenance times to minimize downtime and maintain schedules. Monitoring driver behavior and ensuring a high level of customer service. Analyzing data to increase business operational efficiency. Utilizing GPS systems to monitor drivers and track vehicles. Take on the responsibility for efficient and scheduling of deliveries proper routing of trucks, and take telephone orders and other information related to delivery of products Updates and monitor driver’s location Sending daily and weekly reports Guiding drivers for offloading to port and assist for the documents needed Registration process for trucks/trailers and follow up it with government authorities. Schedule repairs and maintenance of trucks and other company equipment Assist in taking scheduled inventories, set-up and maintain all driver files Follow company policies and procedures and recommendations on lease extensions Maintain technical and computer skills and capability to effectively use distribution and office software Other duties as assigned by the transport manager QHSE Management & Support Ensure achievement of QRTS Objectives Ensure that the EPR programs are undertaken to prepare drivers to face RTS issues prior to dispatch Take part as applicable in Mock Drills and trainings related to RTSParticipating in Root Cause and implementing corrective action as required Receive Purchase Requisitions (PR), check for correctness and transfer into a Purchase Order(PO) Carry out cancellation and amendments to PO’s Organize and maintain computerized records for the FMSCarry out system administration tasks as required for Oracle and the FMS<br>Experience Bachelors in Logistics or Safety. At least 4 years experience in fleet management of Heavy duty Trucks carrying hazardous materials within KSA and cross border. Minimum 2-3 years in the transportation industry. Outstanding organizational skills. Exceptional interpersonal skills. Excellent written and verbal communication<br>If this sounds like you, please apply to this job with your updated CV, we would like to hear from you.

The Technical Sales Support Engineer will drive installed-base aftermarket, spare parts and brownfield business development across Saudi Arabia and Bahrain, focusing on GOSP, oil &amp; gas, refineries, petrochemical and seawater facilities.<br><br>The role will leverage SLB's legacy Cameron installed base as a strategic door opener to facilities, developing trusted customer relationships, understanding operational challenges and converting identified needs into opportunities across the broad PTS (Process Technologies &amp; Solutions) lifecycle-services portfolio.<br><br><strong>Key Responsibilities<br><br>Installed Base &amp; Spare Parts<br><br></strong><ul><li>Own and develop the legacy Cameron installed base, identifying aftermarket, upgrade, replacement, service and lifecycle opportunities.</li><li>Drive spare-parts business for the Geounit and ensure customers maintain appropriate and up-to-date spare-parts inventories.</li><li>Review installed equipment and customer spare-parts requirements, identify obsolete, discontinued or at-risk components, and proactively implement SLB spares obsolescence/replacement programs.</li><li>Develop installed-base strategies to increase equipment reliability, availability and lifecycle value.<br><br></li></ul><strong>Customer &amp; Facility Engagement<br><br></strong><ul><li>Establish a strong network across Operations, Maintenance, Engineering, Reliability, Procurement and Projects.</li><li>Understand facility procurement routes, decision makers, specifications, approved-vendor requirements and purchasing processes.</li><li>Conduct regular facility visits to understand operations, troubleshoot issues and identify customer pain points.</li><li>Use the installed base as a door opener to expand SLB relationships within the facility.<br><br></li></ul><strong>Technical Assessment &amp; Solution Development<br><br></strong><ul><li>Obtain necessary technical, operational and process data from clients.</li><li>Compile, validate, structure and analyze data to understand facility conditions, equipment performance, operational challenges and root causes.</li><li>Work closely with SLB's fleet of technical experts, subject-matter experts and technology domains to obtain specialist advice and support solution development.</li><li>Translate customer problems into practical, value-driven SLB solutions, including cross-division capabilities where applicable.</li><li>Prepare technical reports, assessments, studies and presentations documenting findings, analysis, recommendations and proposed solutions.</li><li>Present findings and recommendations directly to client engineering, operations, maintenance and management teams.<br><br></li></ul><strong>Brownfield &amp; PTS Lifecycle Business<br><br></strong><ul><li>Develop a strong understanding of the diversity of the PTS brownfield and lifecycle-services portfolio, including:</li><li>Spare parts &amp; obsolescence management</li><li>Internals replacement and upgrades</li><li>Equipment upgrades and retrofit</li><li>Process and performance studies</li><li>Debottlenecking studies</li><li>Retrofit and revamp studies</li><li>Operations &amp; Maintenance contracts</li><li>Maintenance support and installation services</li><li>Turnaround and inspection support/services</li><li>Maintenance contracts</li><li>Laboratory and analytical services</li><li>Equipment optimization and lifecycle solutions</li><li>Identify opportunities where multiple PTS services can be combined to address broader customer requirements.</li><li>Focus on brownfield facilities, debottlenecking, reliability improvement, lifecycle extension and operational performance.<br><br></li></ul><strong>Commercial &amp; Market Development<br><br></strong><ul><li>Support technical proposals, tenders, workshops and customer presentations through commercial handover.</li><li>Work closely with Geounit, Product Lines, SLB technical experts and HQ to develop opportunities and achieve KPIs.</li><li>Maintain market and competitive intelligence across Saudi Arabia and Bahrain.</li><li>Participate in conferences, workshops and technical events to strengthen SLB's </li><li>Bachelor's degree in Chemical/Process, Mechanical or related Engineering.</li><li>5+ years of relevant experience in oil &amp; gas, refinery, petrochemical, water/seawater or process industries.</li><li>Facility operations, maintenance, reliability or engineering experience is highly desirable.</li><li>Strong capability in data collection, analysis, technical problem solving and report preparation.</li><li>Strong customer-facing, networking and consultative-sales skills.</li><li>Engineering/process simulation/design/equipment-sizing software experience is an advantage.</li><li>Existing relationships with major KSA/Bahrain operators, EPCs or engineering organizations are advantageous.<br><br></li></ul>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.

<p><strong>Position Title: Vendor Registration &amp; Tendering Officer (Saudi Experience Required)</strong></p><p>A specialized role focused on vendor registrations, tender submissions,</p><p>Document control and compliance for recruitment, manpower supply, heavy</p><p>equipment rental, and material supply services.</p><p><br></p><p><strong>Role Summary</strong></p><p>He will be responsible for managing all vendor registrations, prequalification</p><p>submissions, and tendering activities for ITL Contracting company specializing in</p><p>overseas recruitment, supplementary manpower, heavy equipment rentals, and</p><p>industrial/material supply. The role ensures the company is fully registered, compliant,</p><p>and eligible to participate in tenders with major Saudi clients across Oil &amp; Gas, EPC, Civil</p><p>Construction, Facilities Management, Industrial Services, and Government entities.</p><p><br></p><p><strong>Key Responsibilities</strong></p><p>1. Vendor Registration &amp; Portal Management</p><ul><li>Complete and maintain vendor registrations with major Saudi clients such as Saudi Aramco, SABIC, Ma’aden, SWCC, SEC, NEOM, Royal Commission, PIF entities, EPC contractors, government procurement portals (Etimad) and private networks SupplHi, Achilles, SAP Ariba, etc.</li><li>Upload and update company documents including CR, Chamber, Zakat, GOSI, Saudization certificates, financials, manpower capability lists, equipment lists, HSE/QA manuals, and project references.</li><li>Track renewal dates, compliance requirements, and portal updates.</li><li>Maintain a master database of vendor codes, portal credentials, and registration statuses.</li></ul><p><br></p><p><strong>2. Tendering &amp; Bidding</strong></p><p><br></p><ul><li>Review tender invitations and RFQs related to:</li></ul><p>o Overseas recruitment services</p><p>o Supplementary manpower supply (hourly/monthly)</p><p>o Heavy equipment rental with operators</p><p>o Material supply (industrial, oilfield, construction, tools, consumables)</p><p><br></p><ul><li>Prepare technical bid documents including:</li></ul><p>o Company profile</p><p>o Recruitment capability</p><p>o Manpower availability lists</p><p>o Equipment fleet details</p><p>o Material supply capability</p><p>o HSE/QA certifications</p><p>o Past performance and project references</p><p><br></p><ul><li>Coordinate with finance to prepare commercial bids, pricing sheets, BOQs manpower rates, equipment rental rates, and supply quotations.</li><li>Upload tender submissions on portals such as Aramco SAP Ariba, Etimad, NEOM, RC, Ma’aden, EPC contractor portals, etc.</li><li>Maintain a tender tracker for submitted, ongoing, and awarded bids.</li></ul><p><br></p><p><strong>3. Compliance &amp; Documentation</strong></p><ul><li>Ensure all company documents meet Saudi regulatory and client-specific compliance standards.</li><li>Coordinate with Business Development, HR, Recruitment, Operations, and Finance to collect updated certificates and supporting documents.</li><li>Verify accuracy of manpower lists, equipment lists, and material supply capability documents before submission.</li></ul><p><br></p><p><strong>4. Client Coordination</strong></p><ul><li>Communicate with procurement, vendor management, and tendering</li></ul><p>departments of major clients.</p><ul><li>Respond to clarifications, additional document requests, and compliance queries.</li><li>Follow up on vendor approvals, tender evaluations, and prequalification results.</li></ul><p><br></p><p><strong>5. Internal Coordination &amp; Reporting</strong></p><ul><li>Work closely with the Business development team, Recruitment team, Manpower Operations team, Heavy Equipment, and Material Supply teams to ensure accurate tender submissions.</li><li>Provide weekly reports on vendor registration status, tender progress and upcoming deadlines to the reporting manager.</li><li>Maintain organized digital records for audit and compliance purposes.</li></ul><p><br></p><p><strong>Required Experience</strong></p><ul><li>Minimum 3–5 years of experience in Saudi Arabia in vendor registration and tendering roles.</li><li>Strong knowledge of Saudi procurement systems and government portals (Etimad, Ariba, NEOM, RC, Ma’aden, SEC, SWCC, EPC contractors).</li><li>Experience in overseas recruitment, manpower supply, heavy equipment rental, or material supply is mandatory.</li></ul>

Job Purpose The CNC technician will be responsible for setting up, programming, and operating CNC machines to produce high-precision components used in oilfield drilling and completion tools. The technician ensures all machining tasks meet the specifications, quality standards, and deadlines, and collaborates with team members to optimize productivity and equipment performance.<br>Duties and responsibilities1. Set up and operate CNC machines (lathes, mills, and grinders) to produce the components of oilfield drilling and completion tools.2. Interpret technical drawings and CAD/CAM models..3. Monitor machine operations and make adjustments to maintain tolerances and surface finishes.4. Inspect finished parts using measuring instruments to ensure quality compliance.5. Perform routine maintenance on machines and troubleshoot any technical issues.6. Collaborate with engineers and workshop supervisors to improve machining processes.7. Document production data and machine logs accurately.8. Ensure all parts are produced within industry specifications and quality control standards.9. Maintain a clean and organized work environment following safety protocols. <br>Qualifications 1. Have diploma in CNC machining or mechanical engineering.2. Minimum 3 years of experience operating CNC machines, preferably in an oilfield drilling and completion tools area.3. Strong understanding of manufacturing processes and quality standards.4. Technical troubleshooting and root cause analysis skills.5. Good verbal and written communication skills in English.6. Have basic computer skills (Microsoft Word, Excel, etc).7. Good communication and interpersonal skills.

Description<br><br>Tuwaiq Casting & Forging is seeking a skilled and certified NDE Technician specialising in Ultrasonic Testing (UT) to join the Quality Department. Reporting to the NDE Engineer, this role is responsible for performing Ultrasonic Testing on cast and forged components to detect internal discontinuities, ensuring full compliance with client specifications, internal quality procedures, international codes, and TCF EHSS safety regulations. The role is critical for verifying the structural integrity of high-stress parts and supporting cross-functional NDT activities including RT, MT, PT, and VT.<br><br>Key Responsibilities<br><br>Receive and execute the day-to-day Ultrasonic Testing inspection schedule for production lines Maintain NDE Shop inventory stocks for NDE consumables required for day-to-day operations Prepare detailed UT Scan Plans and Technique Sheets based on relevant code standards including ASME, ASTM, and EN, as well as specific customer requirements, to ensure 100% volumetric coverage Coordinate and explain techniques to third-party inspectors, customers, and auditors during UT audits or inspections Recommend verification block preparation in accordance with job requirements, materials, and applicable specifications Perform daily verification checks for NDE methods and carry out preventive maintenance on transducers, cables, and flaw detectors to ensure system reliability Set up and calibrate NDE equipment and probes, including the use of calibration blocks to verify range, velocity, and sensitivity in accordance with written instructions and technique sheets Create and evaluate Distance Amplitude Curve (DAC) and Distance Gain Size (DGS) curves for existing blocks and technique sheets Ensure component surfaces are cleaned prior to inspection, removing scale, slag, or roughness in accordance with specific technique sheets to ensure optimal sound transmission Evaluate and interpret ultrasonic signals to characterise discontinuities such as porosity, shrinkage, cracks, and laps based on applicable acceptance criteria Maintain detailed UT inspection logs and upload reports to the MES system Maintain accurate records of calibration, inspection logs, scan plans, data files, and inspection results, ensuring full traceability to specific melt or heat numbers, and upload to the MES system Arrange materials in designated safe locations and ensure the shop floor remains compliant with EHSS protocols Ensure all inspection activities comply with applicable international standards including ASTM A609, EN ISO 12680, ASTM A388, and EN ISO 10228-3, as well as specific customer technical specifications Participate in cross-functional NDT operations including RT, MT, PT, and VT when required to support the overall production schedule and quality flow.<br><br>Requirements<br><br>Education<br><br>ITI, Diploma, Degree, or equivalent qualification in a relevant discipline.<br><br>Certifications<br><br>ASNT Level II certification in a minimum of four NDT methods including RT, UT, MT, and PTISO 9712 certification is preferred.<br><br>Experience<br><br>Minimum 5–8 years of industrial Ultrasonic Testing experience, with at least 5 years in the casting industry Forging experience is an additional advantage Previous GE Equipment training and certification is preferred Proficiency in operating GE Krautkramer and RT, MT, PT NDE instruments Ability to work across multiple NDT methods including RT, MT, PT, UT, and VTSound understanding of NDE codes including ASME, ASTM, ISO, and EN standards.<br><br>Technical Skills<br><br>Ability to interpret engineering drawings, inspection standards, and test procedures Strong understanding of UT principles and DAC and DGS curves Proficiency in UT inspection, interpretation, and reporting Knowledge of defect types typical in castings and forgings Proficiency in MS Office, documentation, and email communication Commitment to safety, quality, and continuous improvement.<br><br>Behavioral Competencies<br><br>Strong attention to detail and observation skills Good communication and reporting abilities Physically fit for fieldwork and capable of working in confined spaces or at elevated positions when required.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Dear Candidate,</p><p><br></p><p>We have job opportunities for Mukoun, Saudi Arabia</p><p><br></p><p>Engineer - Electrical / Mechanical / Civil</p><p>Civil Foreman - Finishing / Carpenter</p><p>Foreman - Electrical / Mechanical</p><p><br></p><p>Client Interview will be conducted on 23rd July on the below address:</p><p>JABAL TARIQ TOURS &amp; TRAVELS</p><p>NEMINATH SQUARE 8TH FLOOR</p><p>RAM MANDIR SIGNAL</p><p>SV ROAD</p><p>GOREGAON WEST</p><p>MUMBAI – 400101</p><p><br></p><p>Client Interview will be conducted on 24th July on the below address:</p><p>JABAL SKILL HUB</p><p>BUILDING NO 46,</p><p>NEMINATH INDUSTRIAL ESTATE NO 02,</p><p>HDIL INDUTRIAL ESTATE</p><p>CHANDANSAR RD VIRAR EAST</p><p>VIRAR MAHASHTRA - 401303</p><p><br></p><p>Experience in construction industry is mandatory.</p><p><br></p><p>Interested candidates please forward your updated CV on the mentioned Email ID</p><p><br></p><p>Thanks &amp; Regards</p><p>Jabal Tariq Tours &amp; travels</p><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Experience in construction sector is mandatory</p><p></p></section>

Production Manager – Aircraft Hangar Door Manufacturing<br>We are seeking an experienced Production Manager to lead the manufacture and delivery of large-scale aircraft hangar door systems.<br>This is a specialist role for someone with strong experience in steel fabrication, and production management, ideally within aircraft hangar doors, industrial door systems or large engineered metal structures.<br>Key responsibilities Manage the complete production process for aircraft hangar door systems. Plan workshop capacity, labour, materials and production schedules. Oversee steel fabrication, welding, assembly, finishing and quality inspections. Ensure manufacturing is completed in line with approved drawings, specifications and project deadlines. Coordinate closely with design, engineering, procurement, quality and site-installation teams. Review fabrication drawings, bills of materials and production requirements. Monitor productivity, manufacturing costs, material usage and workshop performance. Identify production risks, bottlenecks and technical issues, implementing effective solutions. Ensure compliance with health, safety and quality standards. Manage supervisors, fabricators, welders and assembly teams. Support testing, pre-assembly, packing and preparation for site installation. Drive continuous improvement across production methods, workflow and quality. Required experience Proven experience as a Production Manager, Manufacturing Manager or Fabrication Manager. Direct experience with aircraft hangar doors is strongly preferred. Strong knowledge of heavy steel or metal fabrication. Experience manufacturing large sliding, folding, telescopic, vertical-lift or motorised door systems. Ability to read and interpret engineering and fabrication drawings. Strong understanding of welding, assembly, tolerances and quality control. Experience managing workshop teams, production schedules and material requirements. Strong coordination skills across engineering, procurement and installation functions. Excellent leadership, problem-solving and communication skills. Highly desirable Experience with airport, aviation or aircraft maintenance hangar projects. Knowledge of door-drive systems, motors, controls and automation. Experience with structural steel, large-span moving structures or specialist industrial doors. Familiarity with Auto CAD, Solid Works, Inventor, Tekla or ERP/MRP production systems. Experience working on international projects. The opportunity This is an excellent opportunity to take ownership of the production function within a specialist engineering environment and contribute to the successful delivery of complex aircraft hangar door projects. To apply, please send your CV or message me directly for a confidential discussion.#Production Manager #Manufacturing Manager #Aircraft Hangar Doors #Hangar Doors #Steel Fabrication #Heavy Engineering #Aviation #Industrial Doors #Fabrication Manager #Engineering Jobs

<strong>A Snapshot of Your Day<br><br></strong>As a Manufacturing Assembly Technician at Siemens Energy, you will engage in hands-on production operations within the transformer manufacturing process. You will work on meaningful projects that contribute to the production of high-quality transformers, directly impacting our clients and partners while supporting Siemens Energy’s mission to deliver reliable energy solutions.<br><br><strong>How You’ll Make An Impact<br><br></strong><ul><li>Perform active-part drying operations, ensuring adherence to standard work instructions and monitoring process data.</li><li>Prepare tanks by assembling accessories according to drawings and conducting self-inspections to meet quality standards.</li><li>Execute active part in tanking, including tightening and installation of components, while ensuring compliance with specifications.</li><li>Carry out vacuum and oil filling procedures, maintaining equipment and troubleshooting any malfunctions during the process.</li><li>Disassemble transformers post-testing, preparing accessories for delivery and ensuring proper packaging and storage.</li><li>Uphold safety, quality, and 5S management practices, maintaining a clean and organized work environment.<br><br><br></li></ul><strong>What You Bring<br><br></strong><ul><li>High school diploma or vocational/technical certificate; technical training in electrical or mechanical trades is preferred.</li><li>Prior experience in transformer or heavy electrical equipment manufacturing is advantageous.</li><li>Ability to thrive in a physically demanding production environment and willingness to work in shifts.</li><li>Basic proficiency in English and Arabic is preferred for effective communication.</li><li>Strong attention to detail and commitment to quality assurance in all tasks.</li><li>A proactive approach to problem-solving and equipment maintenance, contributing to team efficiency.<br><br><br></li></ul><strong>About The Team<br><br></strong>Our Grid Technology division enables a reliable, sustainable, and digital grid. The power grid is the backbone of the energy transition. Siemens Energy offers a leading portfolio and solutions in HVDC transmission, grid stabilization and storage, high voltage switchgears and transformers, and digital grid technology.<br><br><strong>Who is Siemens Energy?<br><br></strong>At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation.<br><br>Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.<br><br>Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo<br><br><strong>Our Commitment to Diversity<br><br></strong>Lucky for us, we are not all the same. Through diversity we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character – no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences.<br><br><strong>Rewards/Benefits<br><br></strong><ul><li>Opportunities to work with a global team </li><li>Opportunities to work on and lead a variety of innovative projects </li><li>Continual learning through the Learn@Siemens-Energy platform <br><br><br></li></ul>https://jobs.siemens-energy.com/jobs<br><br>

The Hull Construction Manager is responsible for planning, organizing, directing, and controlling all hull construction activities associated with newbuilding vessel projects. The role leads hull fabrication, block assembly, block erection, and related production activities to ensure vessels are constructed safely, on schedule, within budget, and in compliance with quality and classification requirements.<br>The position is responsible for maximizing productivity, optimizing resources, managing manpower, and driving continuous improvement across all hull construction operations.<br>Key Responsibilities Production Management Manage all hull construction activities from steel fabrication through block assembly, block erection, and structural completion. Ensure project schedules and production targets are achieved in line with contractual milestones. Coordinate construction activities with Engineering, Planning, Procurement, Quality, Outfitting, and Project teams. Monitor production progress and implement corrective actions to recover schedule delays. Ensure efficient utilization of workforce, facilities, equipment, and materials.<br>Hull Fabrication & Block Construction Lead steel fabrication workshops, panel lines, sub-assembly, assembly, and block construction operations. Manage block erection and alignment activities within dry docks, slipways, and erection areas. Monitor welding, structural fabrication, dimensional control, and NDT activities. Ensure compliance with approved drawings, specifications, and class requirements. Coordinate heavy lifting and transportation of blocks and modules.<br>Resource & Manpower Management Develop manpower loading plans based on project requirements. Allocate supervisors, foremen, subcontractors, and production personnel effectively. Monitor manpower productivity and implement improvement initiatives. Support recruitment, training, performance management, and succession planning activities.<br>Project Planning & Control Review project schedules and provide production input during project planning phases. Participate in construction strategy development and build sequence planning. Monitor production KPIs, manhours, productivity rates, and earned value performance. Support budget preparation and cost-control activities. Quality Management Ensure construction activities comply with:Classification Society requirements Client specifications Company quality procedures International shipbuilding standards Participate in inspections with Owners, Class Surveyors, and regulatory bodies. Support resolution of NCRs and quality-related issues.<br>HSE Responsibilities Promote a strong safety culture throughout hull construction operations. Ensure compliance with all Health, Safety, Environmental, and regulatory requirements. Conduct regular safety reviews and risk assessments. Ensure safe execution of heavy lifting, confined space, hot work, and work-at-height activities.<br>Continuous Improvement Implement Lean Manufacturing, 5S, Six Sigma, and productivity improvement initiatives. Analyze production bottlenecks and improve workflow efficiency. Drive innovation in fabrication, assembly, and erection methodologies.<br>Qualifications Bachelor's Degree in Naval Architecture, Ocean Engineering, Shipbuilding Engineering, or a related engineering discipline. Additional project management or shipbuilding certifications will be an advantage.<br>Experience Minimum 15-20 years of experience in shipbuilding, shipyard operations, or heavy engineering projects. Proven experience in managing hull fabrication, block assembly, block erection, and shipbuilding construction activities. Strong track record in leading large multidisciplinary teams within a shipyard environment. Experience managing subcontractors, project schedules, manpower, and budgets. Previous experience in large commercial, naval, offshore, or newbuild vessel projects is preferred.

Head of Engineering Eastern Province, Saudi Arabia | Full-time<br>We are seeking a Head of Engineering to lead our engineering consultancy and design function, serving as the senior technical authority across civil, mechanical, and electrical disciplines. This is an advisory and design leadership role — not a general management position. The role is responsible for providing engineering consulting services to our group's operating entities, charity projects, and stakeholders, as well as supporting operations with technical oversight on fit-out, renovation, and maintenance projects. The Head of Engineering also oversees offshore CAD drafting and interior design resources, manages the department's document control function, and ensures all engineering deliverables meet quality, regulatory, and client requirements.<br>Key Accountabilities Engineering Consultancy Provide civil, mechanical, and electrical engineering consulting to group entities and stakeholders. Conduct site assessments, feasibility reviews, and technical evaluations. Act as owner's representative in dealings with external engineering offices and contractors. Design & Drafting Management Oversee production of engineering drawings, Auto CAD drafts, specifications, and design packages. Manage and coordinate offshore CAD and interior/landscape design resources. Review and approve all drawings before issue. Maintain structured document control through the Admin Assistant / Document Controller. Technical Support to Operations Provide engineering guidance to the operations team on fit-out, renovation, and maintenance projects. Review project scopes, specifications, and technical requirements. Advise on material selection, construction methods, and engineering solutions for complex issues. Quality Assurance & Standards Establish and enforce engineering quality standards, drawing conventions, and specification templates. Ensure compliance with Saudi building codes, municipal regulations, and industry standards. Conduct periodic deliverable reviews for accuracy and compliance. Team Leadership & Development Lead, mentor, and evaluate in-house engineers and the offshore design team. Manage workload allocation across consulting engagements, design work, and operations support. Identify training needs and participate in engineering recruitment decisions. Reporting & Coordination Prepare monthly engineering activity reports covering ongoing projects, resource utilization, and deliverable status. Coordinate with the Operations Manager. Liaise with external consultants, contractors, and regulatory authorities. Support business development proposals and client presentations. Other Perform any other duties reasonably required by the General Manager consistent with the scope of this role.<br>Competencies Core: ▸ Civil Engineering — Strong expertise in civil design, structural assessment, and construction supervision ▸ Multi-Discipline Knowledge — Working knowledge of mechanical, electrical, and plumbing systems ▸ Auto CAD & Design Tools — Proficiency in Auto CAD; ability to review and approve technical drawings ▸ Building Codes & Regulations — Familiarity with Saudi building codes and construction standards ▸ Project Technical Oversight — Ability to provide guidance on fit-out, renovation, and maintenance projects<br>Soft: ▸ Leadership — Proven ability to lead a small, multi-discipline team including remote/offshore resources ▸ Communication — Ability to explain complex engineering concepts to non-technical stakeholders ▸ Organizational Skills — Strong document control instincts and deliverable tracking ▸ Problem Solving — Practical, solutions-oriented approach in a resource-constrained environment ▸ Collaboration — Ability to influence through expertise rather than hierarchy<br>Job Specifications Industry: General Contracting / Facility Management / Engineering Consultancy Experience:▸ 10 to 15 years in civil engineering, with at least 5 years in a supervisory or lead role▸ Experience providing engineering consultancy across civil, mechanical, and electrical disciplines in a contracting or facility management environment▸ Proven experience managing engineering design teams, including offshore/remote resources▸ Familiarity with fit-out, renovation, and maintenance work in commercial and industrial facilities ▸ GCC experience preferred<br>Education: ▸ Bachelor's degree in Civil Engineering or a closely related discipline▸ Professional Engineer (PE) registration or equivalent is preferred▸ Master's degree or professional certification (PMP, LEED) is an advantage<br>Languages:▸ Arabic — Native▸ English — Advanced proficiency

A leading Construction Project is urgently hiring for the role of MEP Coordinator<br>QUALIFICATION:Bachelor’s degree in Mechanical, Electrical, or related engineering field Strong knowledge of MEP systems and coordination Proficiency in Auto CAD, Revit, and coordination tools5–10 years of relevant experience<br>RESPONSIBILITIES:Coordinate mechanical, electrical, and plumbing (MEP) works Review drawings and resolve clashes Ensure compliance with project specifications and standards Liaise with engineers, contractors, and consultants Monitor site progress and support project execution<br>NOTE:Candidate should have a valid Iqama ID minimum of 3 months 2026Available to join immediately Send us your Latest CV, Academic and Experience Certificates, etc. Applications without the above-mentioned documents will be rejected

Job Title - Heavy Equipment Superintendent/Assessor Location - Dammam, SAContract duration - 1 year (extendable contract) Payroll Company - Prime Innovation (https://www.primearabiagroup.com/)<br>Job Purpose The Heavy Equipment Assessor is responsible for assessing and certifying operator competency through written and practical evaluations in accordance with Saudi Arabia regulations, client requirements, and Energy Tech HE Certifications Unit policies. The role supports safe operations, regulatory compliance, and continuous improvement across project and training sites.<br>Key Responsibilities Conduct written and practical competency assessments for operators in compliance with Saudi Aramco / client standards, local authority requirements, and site safety rules, including:Heavy Equipment (Backhoe, Bulldozer, Forklift, Grader, Wheel Loader, Skid Loader, Backhoe Loader, Sideboom, Telehandler, etc.) Cranes Rigging Ensure assessments align with KSA regulatory requirements, company procedures, and approved competency frameworks. Assist in the development, review, and localization of assessment materials to meet Saudi industry and client standards. Analyze assessment results and prepare clear competency reports and recommendations. Maintain accurate assessment records in line with audit, certification, and KSA compliance requirements. Support internal and external audits, including client and regulatory audits. Take on mentoring responsibilities for assessors and trainees as required. Assist in policy and procedural reviews, ensuring alignment with Saudi regulations and best practices. Ensure strict compliance with Energy Tech HE Certifications Unit policies, ethical standards, and HSE requirements. Coordinate with site teams, operations, and HSE departments to support safe equipment operation across projects.<br>Academic & Professional Qualifications (Minimum Requirements) Technical qualification or diploma in a relevant trade or discipline. Certified in one or more of the following areas:Heavy Equipment operations Crane operations Rigging Proven hands-on experience within industrial, construction, oil & gas, or infrastructure projects in KSA (preferred). Fluent in English (reading and writing). Arabic is an advantage. Working knowledge of Microsoft Office applications (intermediate level).<br>Key Skills & Competencies Strong understanding of KSA HSE regulations and client safety standards. Ability to conduct objective, structured competency assessments. High attention to detail, documentation accuracy, and audit readiness. Strong coordination and communication skills with operators, contractors, and site management. Ability to work independently in site-based and operational environments.