Fire Alarm Technician Jobs - Qassim Saudi

<h3 >About Al-Watania Poultry</h3> <p >Al-Watania Poultry, a prominent company in Saudi Arabia, is dedicated to maintaining high operational standards and ensuring continuous production. We are seeking a skilled professional to join our team in Al Qassim.</p> <h3 >The Role of Electrician Technician</h3> <p >The Electrician Technician is responsible for the maintenance and monitoring of all machines and production lines within our facilities. This <strong >full-time position</strong> involves addressing daily faults, implementing scheduled maintenance programs, and ensuring the continuous readiness and operation of equipment without interruption. The role is based in <strong >Al Qassim</strong>.</p> <h3 >Key Responsibilities</h3> <ul > <li >Execute maintenance work and programs for various equipment throughout the factory.</li> <li >Address and resolve daily operational faults to minimize downtime.</li> <li >Document all completed maintenance tasks, including comprehensive details of the work performed.</li> <li >Monitor and track the performance of production lines and all associated machinery.</li> <li >Prepare and submit detailed reports to the department supervisor regarding maintenance activities and equipment status.</li> </ul> <h3 >Role Objectives</h3> <p >The primary objective of the Electrician Technician is to ensure the uninterrupted and efficient operation of all production machinery. This involves proactive maintenance, swift fault resolution, and rigorous adherence to maintenance schedules to guarantee the continuous readiness of all equipment.</p> <h3 >Required Qualifications and Experience</h3> <ul > <li >Proven experience working in a factory environment is required.</li> <li >A minimum of <strong >2 to 5 years</strong> of relevant experience in electrical maintenance or a similar industrial role.</li> </ul> <h3 >Application Information</h3> <p >Qualified candidates are invited to apply for this full-time Electrician Technician position at Al-Watania Poultry in Al Qassim. Join our team and contribute to our commitment to operational excellence.</p>

<h3 >About the Role</h3> <p >Al-Watania Poultry (Saudi Arabia) is seeking a dedicated <strong >Electrician Technician</strong> to join its operational team in Al Qassim. This full-time position is critical for ensuring the continuous and problem-free operation of all machinery and production lines within the facility. The role involves proactive maintenance, fault resolution, and diligent monitoring of electrical systems to support efficient production.</p> <h3 >Role Purpose</h3> <p >The primary objective of the Electrician Technician is to maintain and monitor the electrical functionality of all production equipment. This encompasses addressing daily operational faults, executing scheduled maintenance programs, and ensuring that all machines and lines are consistently ready for operation without interruption. The technician plays a vital role in upholding the reliability and efficiency of the production process.</p> <h3 >Key Responsibilities</h3> <ul > <li >Execute all assigned maintenance work and implement planned programs for various electrical equipment across the factory.</li> <li >Accurately record all completed tasks, including detailed information on faults identified, repairs performed, and maintenance activities.</li> <li >Regularly check and track the electrical performance of production lines and all associated machinery.</li> <li >Prepare and submit comprehensive reports to the department supervisor detailing equipment status and maintenance interventions.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of <strong >2 to 5 years</strong> of relevant experience as an Electrician Technician in an industrial or production environment.</li> <li >Demonstrated ability to diagnose and resolve electrical faults efficiently.</li> <li >Experience in implementing and adhering to preventative maintenance schedules.</li> <li >Strong attention to detail for precise record-keeping and reporting.</li> </ul> <h3 >Employment Details</h3> <p >This is a <strong >full-time</strong> employment opportunity based in <strong >Al Qassim</strong>, Saudi Arabia. The role offers a professional environment to apply and develop technical expertise within a leading agricultural company.</p> <h3 >Application Information</h3> <p >Candidates who meet the specified qualifications and experience are invited to apply. Join Al-Watania Poultry and contribute to maintaining our high standards of operational excellence and production reliability.</p>

<h3 >About Al-Watania Poultry</h3> <p >Al-Watania Poultry (Saudi Arabia) is a leading company in the poultry industry. We are committed to maintaining high operational standards across our facilities. We are currently seeking a dedicated Electrician Technician to join our team in Al-Qassim.</p> <h3 >Role Overview</h3> <p >The Electrician Technician is responsible for the maintenance and monitoring of all electrical systems within our machines and production lines. This role involves actively addressing daily operational faults, implementing scheduled maintenance programs, and ensuring the continuous readiness and smooth operation of equipment without interruption.</p> <h3 >Key Responsibilities</h3> <ul > <li >Execute maintenance tasks and programs for various electrical equipment throughout the factory.</li> <li >Document all completed work, including detailed records of actions taken and observations.</li> <li >Monitor and track the performance of production lines and all associated machinery.</li> <li >Prepare and submit regular reports to the department supervisor regarding equipment status and maintenance activities.</li> </ul> <h3 >Qualifications and Experience</h3> <p >Candidates for this position should possess <strong >2 to 5 years of relevant experience</strong> in electrical maintenance or a similar technical field, preferably within a manufacturing or industrial environment.</p> <h3 >Work Setting</h3> <p >This is a <strong >full-time position</strong> based at our facilities in <strong >Al-Qassim</strong>, Saudi Arabia. The role requires consistent presence to ensure operational continuity.</p> <h3 >Application Process</h3> <p >We invite qualified individuals who meet the specified requirements to submit their application for this Electrician Technician role.</p>

<h3 >Position Overview</h3> <p >Al-Watania Poultry is seeking a qualified <strong >Electrical Technician</strong> to join our team in Al Qassim, Saudi Arabia. This full-time role is central to ensuring the continuous and problem-free operation of our production machinery and lines through effective maintenance and fault resolution.</p> <h3 >Role Purpose</h3> <p >The Electrical Technician is responsible for the proactive maintenance and diligent monitoring of all electrical systems within machines and production lines. This involves addressing daily operational faults promptly, executing planned maintenance programs, and ultimately ensuring the readiness and uninterrupted functionality of all equipment within the factory environment.</p> <h3 >Key Responsibilities</h3> <ul > <li >Execute maintenance work and programs for various electrical equipment and systems within the factory.</li> <li >Document all completed maintenance tasks, including detailed records of actions taken and observations.</li> <li >Monitor and track the performance of production lines and all associated machinery to identify potential issues.</li> <li >Prepare and submit comprehensive reports on maintenance activities and equipment performance to the department supervisor.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of <strong >2 to 5 years of experience</strong> in electrical maintenance, preferably within a manufacturing or industrial environment.</li> <li >Demonstrated ability to diagnose and resolve electrical faults in machinery and production lines.</li> <li >Proficiency in implementing maintenance programs and ensuring operational readiness.</li> </ul> <h3 >Work Setting</h3> <p >This is a <strong >full-time position</strong> based at our facilities in <strong >Al Qassim</strong>, Saudi Arabia. The role requires on-site presence to manage and respond to operational needs effectively, contributing to the smooth functioning of our poultry production processes.</p> <h3 >Join Our Team</h3> <p >If you possess the required experience and skills for this Electrical Technician role, we invite you to apply and contribute to the operational excellence of Al-Watania Poultry.</p>

<h3 >About the Role</h3> <p >Al-Watania Poultry, a prominent company in Saudi Arabia, is seeking a dedicated <strong >Electrician Technician</strong> to join its operational team in Al-Qassim. This full-time position is essential for maintaining the continuous and efficient operation of all machinery and production lines within the facility. The role involves proactive engagement with daily faults and the systematic implementation of maintenance programs to ensure uninterrupted production.</p> <h3 >Key Objective of the Position</h3> <p >The primary objective of the Electrician Technician is to meticulously maintain and monitor the performance of all production machines and lines. This includes promptly addressing daily electrical faults, executing comprehensive maintenance programs, and ensuring that all equipment is consistently ready for continuous operation without issues. The role is critical in upholding the high standards of operational reliability and efficiency at Al-Watania Poultry.</p> <h3 >Core Responsibilities</h3> <ul > <li >Carry out maintenance work and implement scheduled programs for various electrical equipment throughout the factory.</li> <li >Accurately record all implemented works, including comprehensive details of tasks performed.</li> <li >Regularly check and track the performance of production lines and all associated machinery to identify potential issues.</li> <li >Prepare and submit detailed reports to the department supervisor regarding maintenance activities and equipment status.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of <strong >2 to 5 years of relevant experience</strong> as an Electrician Technician, preferably within an industrial or manufacturing environment.</li> <li >Demonstrated ability to diagnose, troubleshoot, and resolve electrical faults efficiently.</li> <li >Proven capability in implementing and adhering to scheduled maintenance programs for industrial machinery.</li> </ul> <h3 >Work Environment and Location</h3> <p >This is a <strong >full-time position</strong> located at Al-Watania Poultry's facilities in <strong >Al-Qassim, Saudi Arabia</strong>. The role requires on-site presence to ensure immediate response to operational demands and to conduct regular maintenance activities across diverse production areas.</p> <h3 >Join Our Team</h3> <p >If you are an experienced Electrician Technician seeking to contribute your expertise to a critical and dynamic operation, we invite you to consider this opportunity with Al-Watania Poultry. Join us in ensuring the smooth and efficient functioning of our essential production processes.</p>

<h3 >About Al-Watania Poultry</h3> <p >Al-Watania Poultry, a prominent agricultural and food production company in Saudi Arabia, is seeking a skilled <strong >Electrician Technician</strong> to join its operations. This full-time role is based in Al Qassim and is integral to maintaining the high standards of efficiency and reliability across the company's production facilities.</p> <h3 >Role Overview</h3> <p >The Electrician Technician is responsible for the comprehensive maintenance and continuous monitoring of all electrical systems within the factory's machines and production lines. This involves proactively addressing daily operational faults, diligently implementing scheduled maintenance programs, and ensuring the consistent readiness and uninterrupted functionality of all equipment.</p> <h3 >Key Responsibilities</h3> <ul > <li >Execute routine and preventative maintenance tasks and programs for various electrical equipment throughout the factory.</li> <li >Diagnose and resolve daily electrical faults efficiently to minimize downtime and ensure continuous production.</li> <li >Maintain accurate records of all implemented maintenance works, including detailed information on issues, resolutions, and parts used.</li> <li >Monitor and track the electrical performance of production lines and all associated machinery to identify potential issues.</li> <li >Prepare and submit comprehensive reports on maintenance activities and equipment status to the department supervisor.</li> </ul> <h3 >Qualifications and Experience</h3> <p >Candidates for the Electrician Technician position should possess a solid technical background in industrial electrical systems. A minimum of <strong >2 to 5 years of relevant experience</strong> in electrical maintenance, preferably within a manufacturing or poultry processing environment, is required.</p> <h3 >Work Environment and Location</h3> <p >This is a <strong >full-time</strong> role located at Al-Watania Poultry's facilities in <strong >Al Qassim, Saudi Arabia</strong>. The position requires a hands-on approach and involves working directly with production machinery in a dynamic industrial setting.</p> <h3 >Application Information</h3> <p >Al-Watania Poultry invites qualified individuals who meet the specified requirements to apply for this position. Further details regarding the application process will be provided to interested candidates.</p>

<p>A Multi-skilled Steel Fabricator is required, holding a diploma in Mechanical/Manufacturing.</p><p>Must have experience in fabricating light steel equipment and carts, installing canopies and privacy screens, and installing sandwich panel rooms.</p><p>Must be proficient in taking measurements, cutting, welding, and squaring on his own.</p><p>Work area: (Riyadh - Qassim).<br><br>A Multi-skilled Steel Fabricator is required, holding a diploma in Mechanical/Manufacturing Engineering</p><p>with experience in fabricating light steel equipment and carts, installing canopies/shades and privacy fences, and installing sandwich panel rooms.&nbsp;</p><p>He must be skilled in taking measurements, cutting, welding, and squaring on his own.&nbsp;</p>

Job Opportunity – Electrical Technician We are looking for a qualified Electrical Technician . Key Responsibilities:Perform preventive and corrective maintenance on electrical systems and equipment. Diagnose and repair electrical faults. Install and maintain wiring, electrical panels, and related components. Inspect equipment to ensure safe and efficient operation. Read and interpret electrical drawings and schematics. Follow health and safety procedures. Prepare maintenance and fault reports. Requirements:Diploma in Electrical Engineering, Electrical Technology, or a related field. Relevant experience in electrical maintenance. Good knowledge of electrical panels, wiring, and control systems. Ability to use electrical testing and measuring tools. Strong troubleshooting and problem-solving skills. Ability to work independently and as part of a team. Commitment to safety standards and procedures.

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركة ربوة الصحة عن <strong >فني صيدلة</strong> للانضمام إلى فريقها في القصيم. هذا الدور بدوام كامل ومخصص للمرشحين ذوي الخبرة التي تتراوح من 0 إلى سنة واحدة، حيث سيتولى المهام المتعلقة بإنتاج الأدوية ومراقبة جودتها.</p> <h3 >ملخص الوظيفة</h3> <p >يتضمن دور فني الصيدلة دراسة المكونات الكيميائية للأدوية، ومتابعة جميع مراحل إنتاج الأدوية، بالإضافة إلى تشغيل وصيانة الآلات المستخدمة في عمليات الخلط والتجهيز والتصنيع. كما يشمل الدور إعداد وتقديم التقارير الدورية لضمان سير العمل بكفاءة ودقة.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >دراسة مواصفات وتركيبات الأدوية والعقاقير والأمصال والسموم والمواد الصيدلانية، وتنفيذ خطط تصنيع الأدوية المعتمدة.</li> <li >تحديد الكميات المعيارية وإعداد البرنامج التنفيذي لإنتاج الأدوية بالتنسيق مع الصيدلي المشرف.</li> <li >تحضير المواد الخام اللازمة لإنتاج الأدوية الصلبة والسائلة وفقاً للكميات المطلوبة والمواصفات المحددة.</li> <li >تفقد وتشغيل وصيانة الأجهزة والأدوات المستخدمة في عمليات إنتاج الأدوية لضمان كفاءتها وسلامتها.</li> <li >متابعة عمليات إنتاج الأدوية والمستحضرات، وأخذ عينات من المنتج النهائي لإجراء الفحوصات المخبرية ومطابقة المواصفات.</li> <li >إعداد وتقديم تقارير العمل الدورية، وتوثيقها وحفظها بشكل منظم ودقيق.</li> </ul> <h3 >المؤهلات والخبرات المطلوبة</h3> <ul > <li >خبرة عملية تتراوح من <strong >0 إلى سنة واحدة</strong> في مجال الصيدلة أو تصنيع الأدوية.</li> <li >القدرة على فهم ودراسة مكونات الأدوية الكيميائية وتركيباتها.</li> <li >مهارات في تشغيل وصيانة المعدات والأجهزة الصيدلانية.</li> <li >القدرة على إعداد التقارير الفنية وتوثيقها.</li> </ul> <h3 >بيئة العمل</h3> <p >يقع مقر العمل في <strong >القصيم</strong>، وتتطلب الوظيفة التزاماً بالدوام الكامل ضمن فريق شركة ربوة الصحة.</p> <h3 >تقديم الطلبات</h3> <p >ندعو المرشحين المهتمين والذين يستوفون المتطلبات المذكورة أعلاه إلى تقديم طلباتهم لهذه الفرصة في شركة ربوة الصحة.</p></div>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث <strong >شركة عصام قباني وشركاه لمواد الانشاء والتعمير</strong> عن <strong >فني صيانة آلات كهربائية</strong> للانضمام إلى فريقها في منطقة <strong >القصيم</strong>. يركز هذا الدور على تنفيذ أعمال التركيب والصيانة للآلات الكهربائية، ومتابعة إجراءات التشغيل، بالإضافة إلى إجراء الفحوصات النهائية لمرحلة ما قبل التشغيل. كما يشمل الدور متابعة برامج الصيانة الوقائية والعلاجية للآلات الكهربائية وأنظمتها لضمان كفاءة التشغيل واستمرارية الأداء.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >دراسة المخططات الفنية المتعلقة بتنفيذ أعمال التركيب والصيانة للآلات الكهربائية ذات التيار المتناوب والمستمر.</li> <li >متابعة عمليات تركيب الآلات الكهربائية والإشراف على إجراءات التشغيل المتعلقة بها.</li> <li >إجراء الفحوصات النهائية للآلات الكهربائية قبل مرحلة التشغيل لضمان جاهزيتها.</li> <li >تنفيذ الفحوصات الدورية للتأكد من صلاحية عمل الآلات الكهربائية، مثل فحوص العازلية، التأريض، الدوران، ارتفاع درجة الحرارة، وتيار بدء الحركة.</li> <li >تشخيص الأعطال الفنية في الآلات الكهربائية وأنظمة تشغيلها وتحديد أسبابها.</li> <li >متابعة إجراءات تنفيذ برامج الصيانة الوقائية والعلاجية للآلات الكهربائية وأنظمتها.</li> <li >تطبيق جميع إجراءات وتعليمات السلامة والصحة المهنية في بيئة العمل.</li> </ul> <h3 >المؤهلات والخبرة</h3> <ul > <li >خبرة عملية تتراوح بين <strong >2 إلى 5 سنوات</strong> في مجال صيانة الآلات الكهربائية.</li> <li >معرفة قوية بالمخططات الكهربائية للآلات ذات التيار المتناوب والمستمر.</li> <li >فهم شامل لإجراءات التشغيل والفحوصات الفنية للآلات الكهربائية.</li> </ul> <h3 >المهارات والكفاءات</h3> <ul > <li >القدرة على تشخيص الأعطال الكهربائية بدقة وفعالية.</li> <li >مهارات تطبيق برامج الصيانة الوقائية والعلاجية.</li> <li >الالتزام الصارم بتعليمات وإجراءات السلامة والصحة المهنية.</li> <li >مهارات تنظيمية ومتابعة جيدة.</li> </ul> <h3 >تفاصيل العمل</h3> <ul > <li >نوع الوظيفة: <strong >دوام كامل</strong>.</li> <li >الموقع: <strong >القصيم</strong>.</li> <li >الراتب: <strong >غير معلن</strong>.</li> </ul> <h3 >التقديم</h3> <p >ندعو المهتمين ممن تنطبق عليهم المتطلبات المذكورة أعلاه للتقديم على هذه الوظيفة.</p></div>

Mechanical Maintenance and Repair Activities Perform planned preventive, predictive, corrective, and breakdown maintenance activities on assigned mechanical equipment Carry out daily inspections, running checks, and maintenance checklists in accordance with approved maintenance schedules Monitor the physical condition of equipment and report abnormalities, non-conformances, and developing defects to the Mechanical Maintenance Engineer Troubleshoot mechanical failures using approved tools, drawings, manuals, and diagnostic techniques to identify the cause and carry out necessary repairs Perform dismantling, inspection, cleaning, repair, replacement, reassembly, alignment, and functional testing of mechanical equipment and components Replace defective parts such as bearings, seals, gaskets, O-rings, gland packing, couplings, bolts, filters, strainers, belts, and lubrication-system components Perform adjustment, alignment, tightening, lubrication, greasing, oil top-up, oil changing, and cleaning activities in accordance with approved procedures Identify and report corrosion, cracks, leaks, overheating, vibration, abnormal noise, misalignment, loose bolts, damaged insulation, and other equipment defects Ensure the working area is clean, safe, and properly restored after completion of maintenance activities<br><br>v Support maintenance, inspection, and repair of mechanical equipment including, but not limited to:<br><br>Siemens 9000HL-Class gas turbine auxiliaries, including lube oil, hydraulic oil, fuel gas, inlet air, ventilation, and turning gear systems Steam turbine auxiliaries, including lube oil, gland steam, seal oil, condensate, cooling, and turning gear systems Heat Recovery Steam Generator (HRSG), including drums, valves, blowdown systems, expansion joints, and associated auxiliary equipment Pumps, including boiler feedwater pumps, condensate extraction pumps, closed cooling water pumps, service water pumps, fire water pumps, fuel oil pumps, chemical dosing pumps, and drainage pumps Compressors, blowers, fans, air handling units, ventilation fans, and instrument/service air compressor systems Valves, including gate, globe, check, control, safety Valves Water treatment, reverse osmosis, condensate polishing, chemical dosing, wastewater treatment, and other balance-of-plant mechanical equipment Inspection, Testing, and Troubleshooting Conduct routine inspections and condition assessments of assigned mechanical equipment Use approved maintenance and diagnostic tools such as vibration meters, infrared thermometers, laser alignment tools, dial gauges, feeler gauges, torque wrenches, pressure gauges, vernier calipers, and micrometers Assist in vibration monitoring, alignment checks, bearing inspections, pump performance checks, valve testing, pressure testing, leak testing, and functional testing Record inspection findings, test readings, equipment condition, defects identified, and maintenance work completed Assist in identifying the root cause of equipment failures and support implementation of corrective actions Monitor repeated failures and report recommendations for repair, modification, replacement, or maintenance-plan improvement Support basic welding, fabrication, and workshop repair activities Participate in planned shutdowns, major outages, overhauls, commissioning activities, warranty works, and emergency repairs Safety, Permit-to-Work, and Compliance Follow all applicable safety rules, permit-to-work requirements, lockout/tagout procedures, confined-space-entry requirements, lifting procedures, and site safety standards Verify that equipment is properly isolated, depressurized, drained, vented, cooled down, and released for maintenance before starting work Use required personal protective equipment, approved tools, lifting equipment, and safety devices at all times Participate in toolbox talks, risk assessments, safety observations, hazard reporting, audits, and incident investigations Immediately report unsafe conditions, leaks, damaged tools, lifting hazards, near misses, and incidents Follow environmental and waste-management requirements, including proper identification, handling, segregation, and disposal of waste materials Ensure maintenance work complies with approved site procedures, OEM requirements, quality standards, and EHS requirements Documentation and CMMS Support Complete maintenance checklists, inspection sheets, work completion records, test reports, and defect reports accurately Provide clear feedback to the Mechanical Maintenance Engineer regarding work completed, materials used, defects found, and follow-up actions required Support work-order completion, man-hour recording, and equipment-history updates in the CMMS Spare Parts, Tools, and Housekeeping Review assigned work orders and identify the required spare parts, consumables, tools, lifting equipment, and test instruments before starting work Check availability of spare parts and coordinate with the warehouse storekeeper for material collection and return Maintain mechanical hand tools, power tools, lifting tools, portable test instruments, and workshop equipment in good working condition Report shortages of spare parts, consumables, special tools, and defective equipment to the Mechanical Maintenance Engineer Maintain good housekeeping in workshops, equipment areas, stores, and maintenance locations Coordination, Training, and Continuous Improvement Work closely with Mechanical Maintenance Engineers, Operations personnel, Electrical and I&C teams, contractors, OEM representatives, and other site personnel Support Operations during equipment isolation, release for maintenance, testing, start-up, and return-to-service activities Assist other departments in troubleshooting and repair activities when required Support training and mentoring of junior technicians,, and newly joined maintenance personnel<br><br>Participate in continuous-improvement initiatives, maintenance improvement programs, 5S activities, and hazard-reporting programs.<br><br>Requirements<br><br>Education<br><br>Mechanical Diploma, Mechanical Technology, or an equivalent discipline Mechanical trade certifications is preferred Training in rigging, lifting operations, Forklift operator, and safety courses is an advantage<br><br>Experience<br><br>Minimum 5 years of mechanical maintenance experience in a power plant, heavy industrial facility, oil and gas plant, desalination plant, petrochemical plant. Combined cycle power plant experience is preferred<br><br>Technical Knowledge<br><br>Knowledge of mechanical systems used in combined cycle power plants Knowledge of gas turbines, steam turbines, HRSG systems, pumps, valves, compressors, fans, blowers, heat exchangers, filters, strainers, and piping systems Understanding of lube oil, hydraulic oil, fuel gas, fuel oil, cooling water, condensate, boiler feedwater, compressed air, and water-treatment systems Knowledge of rotating-equipment maintenance practices, including bearing inspection, lubrication, seal replacement, coupling alignment, and vibration awareness Familiarity with valve maintenance, including gland packing, seat leakage, Lapping, and basic valve overhaul activities Understanding of lifting and rigging, torque tightening, mechanical assembly, and use of lifting tools Knowledge of permit-to-work, lockout/tagout, confined-space entry, lifting operations, and general mechanical safety requirements<br><br>Practical Skills<br><br>Ability to use maintenance diagnostic tools such as vibration meters, infrared thermometers, pressure gauges, and tachometers Basic computer skills for CMMS andwork-order updates, maintenance records, and reporting Good working knowledge of written and spoken English Good communication, teamwork, and coordination skills Willingness to work during planned outages, emergency breakdowns, shift duties, and on-call assignments when required

<h3 >About ABYAT</h3> <p >ABYAT is a prominent retail store in the Middle East, established in September 2005. The company specializes in home improvement products, operating a 22,000 square meter store that offers over 22,000 items, including elegant tiles, captivating wallpapers, state-of-the-art lighting solutions, and stylish kitchen fixtures. Founded in Kuwait, ABYAT is actively expanding its operations into Saudi Arabia, Qatar, and the UAE, maintaining a strong focus on customer needs and service excellence.</p> <h3 >The Role: Technical Support Engineer</h3> <p >ABYAT is seeking a <strong >Technical Support Engineer</strong> to join its team in <strong >Al Qassim</strong>. This is a <strong >full-time</strong> position requiring <strong >2-5 years of experience</strong> in a technical support role. The successful candidate will be integral to ensuring the smooth operation of IT systems across ABYAT’s retail and corporate environments.</p> <h3 >Role Purpose</h3> <p >The primary purpose of this role is to provide comprehensive technical support, ensuring the availability, reliability, and performance of end-user devices, Microsoft services, retail technology systems, and IT infrastructure. The Technical Support Engineer will serve as the first point of contact for technical incidents and service requests, delivering exceptional customer service and contributing to business continuity.</p> <h3 >Key Responsibilities</h3> <ul > <li >Provide first-line technical support for hardware, software, operating systems, and peripheral devices across ABYAT locations.</li> <li >Manage and resolve incidents and service requests through the IT ticketing system, adhering to service level expectations.</li> <li >Administer Active Directory, including user account creation, access management, group membership updates, and employee onboarding/offboarding.</li> <li >Support Microsoft 365 applications, such as Outlook, Teams, and Office applications, and troubleshoot user account and email-related issues.</li> <li >Diagnose and resolve issues related to Windows operating systems, desktops, laptops, printers, and workstations.</li> <li >Perform first-level network troubleshooting, covering connectivity, DNS, DHCP, TCP/IP, LAN, and wireless network issues.</li> <li >Support Point of Sale (POS) systems, receipt printers, barcode scanners, and other retail technology devices to ensure uninterrupted showroom operations.</li> <li >Prioritize and respond quickly to critical business incidents affecting sales operations, store productivity, or management users.</li> <li >Maintain accurate ticket updates, technical documentation, and standard operating procedures.</li> <li >Collaborate with internal teams and vendors to resolve technical issues and support infrastructure-related initiatives.</li> </ul> <h3 >Candidate Profile</h3> <ul > <li >Strong communication and customer service skills.</li> <li >A structured and logical troubleshooting approach.</li> <li >Ability to work independently and take ownership of technical issues.</li> <li >Strong prioritization skills and a sense of urgency when handling business-critical incidents.</li> <li >Calm, patient, and adaptable personality, with the ability to support users from diverse backgrounds.</li> </ul> <h3 >Application Information</h3> <p >Qualified candidates are invited to apply for this position. Salary information will be discussed during the interview process.</p>

Maintenance and Repair Activities Perform preventive, predictive, corrective, and breakdown maintenance activities on assigned electrical equipment Carry out routine inspections and identify abnormal conditions such as overheating, unusual noise, vibration, oil leakage, loose connections, damaged cables, and insulation deterioration Perform cleaning, tightening, lubrication where applicable, replacement of defective parts, cable termination, minor repair work, and equipment restoration activities Troubleshoot electrical faults, alarms, trips, and abnormal operating conditions to support timely restoration of equipment and minimize plant downtime Ensure maintenance work is completed in accordance with approved procedures, OEM manuals, drawings, safety requirements, and site standards Verify the work area is clean, safe, and properly restored after completion of maintenance activities<br><br>v Support maintenance, inspection, and repair of electrical equipment including, but not limited to:<br><br>Medium-voltage and low-voltage switchgear, circuit breakers, motors repaire, contactors, relays, and control panels Generators, excitation systems, generator auxiliaries, and associated protection systems Generator Circuit Breakers, Isolated Phase Busbars, Gas-Insulated Bus systems, and associated auxiliary equipment where assigned Generator transformers, auxiliary transformers, and transformer auxiliary systems MV and LV motors, motor-operated valves, soft starters, variable frequency drives, and local control stations UPS systems, battery chargers, battery banks, DC distribution boards, emergency lighting, and diesel generator electrical systems Cable systems, cable trays, junction boxes, earthing systems, and lightning protection systems Electrical equipment associated with gas turbines, steam turbines, HRSG systems, water treatment systems, reverse osmosis plants, and balance-of-plant facilities Testing, Inspection, and Troubleshooting Use approved electrical test instruments, including multimeters, clamp meters, insulation resistance testers, continuity testers, earth resistance testers, and phase rotation meters Carry out routine electrical testing such as voltage checks, current checks, insulation resistance testing, battery checks, and earth resistance testing Assist with specialist testing activities such as relay testing, primary injection, secondary injection, breaker timing, contact resistance testing, transformer testing, thermography, and partial discharge testing where applicable Record all test readings accurately and immediately report abnormal results to the Electrical Maintenance Engineer Assist in identifying root causes of equipment failures and support corrective actions as directed Monitor equipment condition and report any developing defects or operational risks Installation, Commissioning, and Modification Support Assist with installation, commissioning, modification, and upgrading of electrical systems and equipment Support equipment testing, energization, functional checks, and return-to-service activities Ensure all installation and modification work complies with technical specifications, approved drawings, and safety requirements Safety, Permit-to-Work, and Compliance Follow all electrical safety rules, permit-to-work requirements, lockout/tagout procedures, grounding requirements, and arc-flash precautions Verify that equipment is properly isolated, discharged, grounded, and tested before work starts Participate in toolbox talks, risk assessments, safety observations, and incident investigations Immediately report unsafe conditions, damaged tools, electrical hazards, near misses, and incidents Ensure all maintenance work is performed in compliance with applicable site procedures, OEM requirements, and environmental, health, and safety standards Documentation and CMMS Support Complete maintenance checklists, inspection sheets, test reports, work completion records, and defect reports accurately Provide clear work feedback to the Electrical Maintenance Engineer, including work completed, materials used, defects found, and follow-up actions required Prepare basic reports on maintenance tasks, equipment condition, and identified issues for review by the Electrical Maintenance Engineer Spare Parts, Tools, and Housekeeping Check the availability of required spare parts, consumables, tools, and test instruments before starting work Handle, store, and preserve electrical spare parts and materials in accordance with site preservation requirements Maintain electrical hand tools, power tools, portable test instruments, and workshop equipment in good working condition Report shortages of spare parts, consumables, and defective tools to the Electrical Maintenance Engineer Support incoming inspection of electrical materials and spare parts in coordination with the Storekeeper when assigned Coordination and Teamwork Work closely with Electrical Maintenance Engineers, Operations personnel, Mechanical and I&C teams, contractors, OEM representatives, and other site personnel Support Operations during equipment isolation, release for maintenance, testing, energization, and return to service Assist in training junior technicians, and new team members in electrical maintenance practices and safety requirements Support continuous improvement by identifying recurring defects, maintenance issues, and opportunities to improve equipment reliability<br><br>Requirements<br><br>Technical Knowledge<br><br>Knowledge of electrical systems used in combined cycle power plants Knowledge of MV and LV switchgear, circuit breakers, transformers, motors, motor control centers, contactors, relays, UPS systems, battery chargers, and DC systems Understanding of generators, generator auxiliaries, power distribution systems, cable systems, earthing systems, and lighting systems Familiarity with electrical drawings, single-line diagrams, wiring diagrams, cable schedules, equipment manuals, and maintenance procedures Understanding of electrical safety requirements, permit-to-work systems, lockout/tagout procedures, grounding, hazardous-energy control, and arc-flash hazards Awareness of electrical protection devices and their functions<br><br>Minimum Qualifications And Experience<br><br>Education<br><br>Electrical Diploma, or an equivalent discipline Electrical trade certification is preferred<br><br>Experience<br><br>Minimum 3 to 5 years of electrical maintenance experience in a power plant, Combined cycle power plant experience is preferred<br><br>Personal Attributes<br><br>Strong commitment to safety, quality, reliability, and compliance Responsible, disciplined, and able to follow instructions and procedures Detail-oriented with a proactive approach to identifying equipment defects Good communication and teamwork skills Ability to work under pressure and manage multiple assigned tasks Willingness to work during planned outages, emergency breakdowns, and on-call duties when required Willingness to work in outdoor and industrial environments<br><br>Physical Requirements<br><br>Physically capable of working in industrial environments Ability to use appropriate personal protective equipment and follow all site safety requirements Ability to respond to emergency maintenance requirements as required

Job Title: Warehouse Keeper Arif Al-Nahdi Company, specializing in the manufacture of fire-fighting pumps and safety systems, announces a job opening. Location: Al-Qassim Duties and Responsibilities: * Managing and monitoring inventory and warehouse operations. * Carrying out daily tasks related to organizing and arranging goods. Experience: * At least one year of prior experience in inventory and warehouse management. * Prior experience using Enterprise Resource Planning (ERP) software. Skills: * Knowledge of and readiness to operate a forklift for daily tasks. * Proficiency in using computers and software applications, particularly Microsoft Word and Excel. * Intermediate English language proficiency is preferred.<br><br><br><br>Job Title: Warehouse Keeper<br>Arif Al-Nahdi Company, specializing in the manufacture of fire-fighting pumps and safety systems, announces a job opening.<br>Location: Al-Qassim<br>Duties and Responsibilities:<br>* Managing and monitoring inventory and warehouse operations.<br>* Carrying out daily tasks related to organizing and arranging goods.<br>Experience:<br>* At least one year of prior experience in inventory and warehouse management.<br>* Prior experience using Enterprise Resource Planning (ERP) software.<br>Skills:<br>* Knowledge of and readiness to operate a forklift for daily tasks.<br>* Proficiency in using computers and software applications, particularly Microsoft Word and Excel.<br>* Intermediate English language proficiency is preferred.

Reapp Rehabilitation announces a job vacancy for the position of "Security Guard" to work at the center's headquarters in the Qassim region – Al-Bukayriyah, and to contribute to providing a safe and organized environment within the center by managing entry and exit movements, implementing security and safety policies, and maintaining the privacy of residents and staff.<br>Tasks and Responsibilities:· Handling parking and dealing with emergency events.· Implementing the center's internal security policies.· Monitoring and reporting any violations.· Communication skills and respect for client privacy.· Monitoring building entrances and exits and preventing unauthorized entry.· Supervising camera and fire alarm systems.<br>Required Qualifications:High school diploma or higher.High level of physical fitness and ability to handle security work requirements within a rehabilitation environment.Previous experience in the security field or health institutions.Preferably holding certificates in security and safety.Ability to work at the center's headquarters in the Qassim region – Al-Bukayriyah.<br>Required Skills and Competencies:Discipline and adherence to regulations and instructions.Good conduct in various situations.Good communication skills with clients and the team.Ability to maintain confidentiality and privacy.Readiness to work in shift patterns according to work needs.<br>

Algihaz is one of Saudi Arabia's leading engineering, procurement, and construction (EPC)companies, Algihaz contracting has been delivering engineering design and construction excellence in infrastructure and essential services for over 45 years. Our Vision A global investment Company that is admired as a place to work to do Business, whilst relentlessly supporting our community. Our Mission Across a range of business sectors, we build trusted partnership that leverage our mutual strengths to underpin economics and communities in the Kingdom and internationally. Our values Integrity: -We consistently sustain the highest standards of commitment to ethics through all our actions by embracing self-discipline, honesty, fairness, and security. Teamwork: - We work together across boundaries to deliver unsurpassed quality and value. Respect- We value the diversity and dignity of everyone, encouraging their development and rewarding their performance. Transparency- We conduct our actions with complete accountability, communicate objectively and are open to all business practices. Solutions-oriented- We are inspired by problems and define them as opportunities to learn and grow as we strive for excellence and dynamism.<br>Responsibilities:• Maintain a safe work environment without any risk to health safety and environment.• Make sure that all the safety standards, rule, and regulations as per AGH and client HSE Requirements.• Conduct or coordinate HSE Training for the site workers as per the nature of job being performed.• Ensure the compliance of HIRA, JSP and LPP at site during the job execution.• Update and maintain all the HSE documents, and records as per AGH and client requirements.• Conduct frequent site inspection to make sure the HSE Compliance at site.• Provide regular HSE reports to the site management and immediate supervisor about site Safety Issues.• Attend the weekly/monthly meetings with client and site management to discuss site safety issues.• Keep up to date with all aspects of relevant health, safety & welfare at work legislation and communicate relevant changes to the projects.• Ensure that safety inspections are carried out, fire drills and fire alarms are correctly reported, safety inspections, risk assessments and lone working procedures are managed, and employees are aware of their responsibilities.• Participate in monthly meetings when required to report on relevant health & safety matters.<br>Requirements: <br>Education:Bachelor’s degree in Engineering (Civil, Chemical, Environmental, or equivalent)<br>Experience:4-5 years of relevant experience in HSE management within construction projects Experience in Overhead Transmission Line projects (OHTL)<br>Professional Certifications:NEBOSH IGCValid membership with the Saudi Council of Engineers (SCE)<br>Additional Qualifications (Preferred):ISO 14001 & ISO 45001 Lead Auditor certifications Previous client approvals in similar projects (e.g., SE, Aramco)

Join the Team at ABYAT - Your Gateway to Retail Excellence!<br>About us Are you ready to be part of the largest retail store in the Middle East ABYAT, spanning an impressive 22,000 square meters and offering over 22,000 products, is your one-stop destination for all things home improvement and more. From elegant tiles and captivating wallpapers to state-of-the-art lighting solutions and stylish kitchen fixtures, we pride ourselves on offering a diverse array of top-quality products under one roof.<br>Established locally with a vision for excellence, ABYAT has been setting benchmarks since its inception in September 2005. With an unwavering focus on our customers, we've crafted an experience that revolves around their needs, from our meticulously designed store layouts to our unparalleled service offerings.<br>Expanding beyond our roots in Kuwait, ABYAT is now making waves in Saudi Arabia and setting our sights on Qatar and the UAE. As we continue to grow, we're seeking passionate individuals to join our dynamic team and contribute to our journey of success.<br>Position: Facilities Manager Location: KSA - Riyadh Type: Full-time<br>The Facilities Manager is responsible for leading, managing, and controlling the end-to-end delivery of facilities management services across assigned ABYAT premises, including both hard and soft services.<br>The role is responsible for ensuring asset uptime, statutory and HSE compliance, effective maintenance planning, contractor performance, budget control, service quality, and operational readiness across facilities. This includes managing preventive and corrective maintenance activities, overseeing service providers, maintaining accurate records and reports, supporting minor projects and site mobilizations, and ensuring all facilities services are delivered in line with approved policies, procedures, SLAs, KPIs, and business requirements.<br>Key Responsibilities:<br>Facilities Operations Management Lead the overall delivery of hard and soft facilities management services across assigned premises. Ensure the implementation of approved policies, SOPs, IMS/HSE procedures, permits to work, risk assessments, and lockout/tagout requirements across all site activities. Translate contracts and scopes of work into clear site objectives, service standards, SLA/KPI targets, and operational plans. Build and maintain integrated site plans covering preventive maintenance calendars, manpower rosters, vendor schedules, consumables, spare parts, and seasonal contingencies. Define critical systems, operational risks, escalation paths, and response procedures to support business continuity. Hard Services and Asset Maintenance Ensure effective preventive and corrective maintenance for HVAC, electrical systems, lighting and controls, plumbing and drainage, firefighting and fire alarm systems, generators, UPS, BMS, elevators, and other critical building systems. Ensure maintenance is completed in line with OEM requirements, safety standards, and statutory requirements. Monitor alarms, system performance, asset condition, and repeated failures to identify risks and improvement opportunities. Approve shutdowns, energization activities, testing, and close-out documentation with proper evidence. Maintain asset registers including make, model, serial number, warranty details, criticality, lifecycle status, and maintenance history. Soft Services Management Manage cleaning, security, pest control, landscaping, waste management, hygiene services, and other soft services as applicable. Set service routes, frequencies, quality standards, inspection routines, and audit cycles. Ensure front-of-house, public areas, and customer-facing spaces are maintained to the required presentation and service standards. Coordinate additional coverage for peak periods, events, tenant moves, operational changes, and business requirements. Contractor and Vendor Management Develop scopes of work and RFQs for facilities services, maintenance contracts, minor works, and operational requirements. Support technical and commercial evaluations and recommend vendor awards within authority limits. Mobilize contractors and service providers, chair progress and HSSE meetings, review deliverables, and verify completion against scope, SLA, and KPI requirements. Manage contractor renewals, improvement plans, non-conformance reports, corrective actions, and close-out documentation. Validate vendor invoices against actual scope delivered and support Finance with payment sequencing. Budgeting, Cost Control and Reporting Prepare annual OPEX and CAPEX budget inputs for facilities activities. Forecast, monitor, and control facilities expenses to ensure activities are executed within approved budgets. Drive cost optimization through scope clarity, frequency reviews, vendor mix improvements, spare parts strategies, and energy-saving initiatives. Track budget versus actual performance and provide variance analysis, risks, and recommendations. Prepare timely monthly facilities management reports covering PPM/CM status, SLA/KPI performance, incidents, NCRs, utilities, vendor performance, budget status, risks, opportunities, and improvement actions. HSE, Compliance and Risk Management Enforce HSE requirements, permits to work, risk assessments, lockout/tagout, and safe systems of work across all facilities activities. Ensure statutory inspections, compliance certificates, permits, checklists, and life-safety documentation are complete, current, and accessible. Maintain readiness of emergency systems including fire pumps, fire alarms, generators, UPS, emergency lighting, and elevator rescue arrangements. Conduct drills, close audit findings, and maintain readiness for internal, external, HSE, quality, and statutory audits. Maintain a live risk register for critical assets and operations and implement mitigation and contingency procedures. CAFM / CMMS and Documentation Ensure CAFM/CMMS data integrity for all work orders, including scope, timestamps, manpower, parts, photos, signatures, and completion evidence. Maintain accurate documentation, logbooks, permits, certificates, asset records, maintenance reports, and compliance evidence. Analyze repeat faults, identify root causes, refine preventive maintenance frequencies and SOPs, and recommend corrective and improvement actions. Ensure all facilities records are complete, auditable, and available for management review and compliance purposes. Projects, Renovations and Site Mobilization Lead minor projects, renovations, and facilities improvement works as assigned. Review drawings, specifications, BOQs, method statements, risk assessments, and execution plans. Supervise work execution, monitor contractor performance, manage snags, and ensure proper handover and close-out. Manage new-site mobilization and transition activities, including asset capture, asset tagging, PPM readiness, emergency plans, and handover packs to steady-state operations. Energy and Utilities Management Monitor energy and water consumption across assigned premises. Investigate consumption anomalies, leaks, overconsumption, and metering issues. Implement conservation initiatives such as set-point optimization, scheduling improvements, low-cost retrofits, and operational improvements. Track savings, return on investment, and performance improvements related to utilities and resource consumption. Stakeholder Coordination Act as the primary facilities contact for internal stakeholders, clients, landlords, tenants, consultants, vendors, contractors, and authorities. Manage approvals, communications, escalations, service recovery, inspections, permits, and statutory compliance coordination Coordinate with Procurement, Finance, HSE/LP, Helpdesk/CAFM, Operations, and Senior Management to ensure smooth facilities operations. Provide updates, reports, recommendations, and escalation support to management as required.<br>Qualifications:<br>8 to 10 years of experience in Facilities Management, with at least 4 years in a supervisory or leadership role. Proven experience managing complex facilities, multi-system sites, and multiple vendors or contractors. Strong experience in hard services, including HVAC, electrical, plumbing, fire systems, generators, UPS, BMS, elevators, and related building systems. Strong experience in soft services, including cleaning, security, pest control, landscaping, waste management, and hygiene services. Experience in preventive maintenance, corrective maintenance, asset management, root-cause analysis, and lifecycle planning. Experience in contract management, vendor management, scope writing, RFQs, bid evaluations, and SLA/KPI monitoring. Experience in budgeting, cost control, invoice validation, CAPEX/OPEX planning, and variance reporting. Hands-on experience with CAFM/CMMS systems and strong data/documentation accuracy. Knowledge of HSE, statutory compliance, emergency readiness, audits, permits, inspections, and certifications. Experience in minor projects, renovations, drawings, BOQs, commissioning, testing, snagging, and handover is preferred. Advanced reporting skills using Excel, Power Point, dashboards, and performance reports.<br>Apply now and take the first step towards an exciting career with ABYAT!

We are looking for an experienced Workshop & Fleet Maintenance Supervisor to join our Facility Management team. The ideal candidate should be a strong hands-on technician with solid experience in vehicle maintenance and repair, as well as the ability to supervise technicians, manage workshop activities, and ensure the operational readiness of the company’s fleet and equipment. Job Summary The Workshop & Fleet Maintenance Supervisor will be responsible for supervising daily workshop and fleet maintenance operations, diagnosing technical faults, following up on mechanical and electrical repairs, supervising technicians, and ensuring that vehicles and equipment are safe, reliable, and ready for operation. Key Responsibilities Supervise daily workshop operations and maintenance activities. Diagnose vehicle and equipment faults and provide technical guidance to technicians. Participate in troubleshooting and repair activities when required. Supervise, distribute, and follow up on technicians’ daily tasks. Follow up on preventive and corrective maintenance schedules. Inspect completed repairs and ensure proper repair quality before releasing vehicles/equipment. Manage vehicle breakdowns and emergency repair requirements. Ensure the operational readiness, safety, and reliability of fleet and equipment. Coordinate with fleet/transport operations to minimize vehicle downtime. Monitor spare parts, tools, workshop equipment, and consumables. Maintain accurate maintenance records, repair history, and vehicle technical files. Monitor maintenance costs and spare parts consumption. Follow up on vehicle inspections, licensing, accidents, and related technical procedures. Ensure compliance with company HSE procedures and applicable Saudi regulations. Prepare daily, weekly, and monthly maintenance and technical reports.???? Qualifications Diploma or Bachelor’s degree in Automotive Technology, Mechanical Engineering, Mechanical Technology, or a related technical field. Strong practical knowledge of vehicle mechanical and electrical systems. Technical certifications in vehicle maintenance, diagnostics, or fleet maintenance are preferred.???? Experience & Skills Minimum 5 years of relevant experience in vehicle maintenance, workshop operations, fleet maintenance, or a similar role. Strong hands-on experience in diagnosing and repairing mechanical and electrical vehicle faults. Proven experience supervising automotive technicians and workshop teams. Strong knowledge of preventive and corrective maintenance. Ability to inspect vehicles, identify faults, and verify completed repairs. Experience in fleet operations and vehicle breakdown management. Good knowledge of spare parts, workshop tools, and maintenance procedures. Experience with GPS tracking and fleet management systems. Experience dealing with Saudi systems and authorities such as TAMM, Najm, and Traffic systems is preferred. Good reporting, communication, and team leadership skills. Ability to work under pressure and respond to emergency breakdowns.

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تعلن شركة الشريف للمقاولات والتنميه التجارية عن حاجتها لـ <strong >مهندس ميكانيكي</strong> للانضمام إلى فريقها في القصيم. يركز هذا الدور على المساهمة في تنفيذ ومتابعة الأعمال الميكانيكية وأنظمة الـ MEP ضمن مشاريع المحطات الكهربائية الفرعية (Substations). يشمل ذلك إعداد التصاميم والمخططات، وبرامج تجميع وتركيب وتشغيل التجهيزات الميكانيكية، بالإضافة إلى إعداد برامج تشغيل المعدات الصناعية والصيانة الوقائية، وتوثيق نتائج الأعمال. الوظيفة بدوام كامل وتتطلب خبرة تتراوح بين 0-1 سنة.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >مراجعة المخططات والرسومات والمواصفات الفنية المتعلقة بالأعمال الميكانيكية وأنظمة MEP في مشاريع المحطات الفرعية.</li> <li >متابعة تنفيذ أعمال أنظمة التكييف والتهوية (HVAC) وأنظمة مكافحة الحريق والحماية من الحريق.</li> <li >إجراء الفحوصات والمعاينات الميدانية للأعمال الميكانيكية لضمان الجودة والمطابقة.</li> <li >المساعدة في إعداد ومتابعة خطط الفحص والاختبار (ITP) وتقارير الفحص وتوثيق نتائج الأعمال.</li> <li >متابعة اختبارات وفحوصات الأنظمة والمعدات الميكانيكية والتأكد من مطابقتها للمواصفات الفنية.</li> <li >المساعدة في تحديد ومتابعة حالات عدم المطابقة (NCR) واتخاذ الإجراءات التصحيحية اللازمة.</li> <li >التنسيق الفعال مع الاستشاريين والمقاولين والفرق الفنية المختلفة في موقع المشروع.</li> <li >ضمان الالتزام التام بالمخططات والمواصفات ومعايير الجودة المحددة للمشروع.</li> <li >الالتزام بجميع إجراءات ومتطلبات السلامة والصحة المهنية في موقع المشروع.</li> <li >متابعة الأعمال الميكانيكية والتنسيق مع الأعمال الكهربائية والمدنية لضمان سير المشروع بشكل متكامل.</li> <li >المساعدة في مراجعة رسومات التنفيذ (Shop Drawings) ووثائق تقديم المواد (Material Submittals) والوثائق الفنية ذات الصلة.</li> </ul> <h3 >الخبرة المطلوبة</h3> <ul > <li >خبرة عملية تتراوح بين <strong >0 إلى 1 سنة</strong> في مجال الهندسة الميكانيكية، ويفضل أن تكون في مشاريع المحطات الكهربائية الفرعية أو مجالات مشابهة.</li> </ul> <h3 >المهارات والكفاءات</h3> <ul > <li >القدرة على قراءة ومراجعة المخططات والرسومات والمواصفات الفنية.</li> <li >معرفة بأنظمة التكييف والتهوية (HVAC) وأنظمة مكافحة الحريق والحماية من الحريق.</li> <li >مهارات التنسيق والتواصل الفعال مع مختلف الأطراف المعنية بالمشروع.</li> <li >الالتزام بمعايير الجودة وإجراءات السلامة المهنية.</li> <li >مهارات إعداد التقارير الفنية وتوثيق الأعمال.</li> </ul> <h3 >بيئة العمل والموقع</h3> <p >يعمل المهندس الميكانيكي ضمن فريق مشروع في مواقع المحطات الكهربائية الفرعية في منطقة القصيم. يتطلب الدور التنسيق المستمر مع الفرق الهندسية الأخرى لضمان سير العمل بشكل متكامل وفعال.</p> <h3 >معلومات إضافية حول الوظيفة</h3> <p >هذه الوظيفة بدوام كامل في القصيم. سيتم تحديد الراتب بناءً على الخبرة والمؤهلات بعد المقابلة الشخصية. نشجع المهندسين حديثي التخرج أو ذوي الخبرة المحدودة على التقديم.</p></div>

Algihaz is one of Saudi Arabia's leading engineering, procurement, and construction (EPC)companies, Algihaz contracting has been delivering engineering design and construction excellence in infrastructure and essential services for over 45 years. Our Vision A global investment Company that is admired as a place to work to do Business, whilst relentlessly supporting our community. Our Mission Across a range of business sectors, we build trusted partnership that leverage our mutual strengths to underpin economics and communities in the Kingdom and internationally. Our values Integrity: -We consistently sustain the highest standards of commitment to ethics through all our actions by embracing self-discipline, honesty, fairness, and security. Teamwork: - We work together across boundaries to deliver unsurpassed quality and value. Respect- We value the diversity and dignity of everyone, encouraging their development and rewarding their performance. Transparency- We conduct our actions with complete accountability, communicate objectively and are open to all business practices. Solutions-oriented- We are inspired by problems and define them as opportunities to learn and grow as we strive for excellence and dynamism.<br>Responsibilities:Maintain a safe work environment, eliminating risks to health, safety, and the environment. Ensure full compliance with AGH and client HSE standards, policies, and regulations. Organize and conduct HSE training tailored to the nature of on-site tasks. Enforce the implementation of HIRA (Hazard Identification and Risk Assessment), JSP (Job Safety Plan), and LPP (Life Protection Plan) during job execution. Update and manage all HSE documentation and records in line with company and client standards. Conduct regular site inspections to verify ongoing HSE compliance. Report safety-related issues to site management and immediate supervisors through regular updates. Attend scheduled meetings with clients and management to discuss site safety matters. Stay current on relevant health, safety, and welfare legislation and communicate updates to project teams. Oversee safety inspections, fire drills, risk assessments, and lone working procedures; ensure all staff understand their safety responsibilities. Participate in monthly meetings to provide input on health and safety performance and concerns.<br><br>Requirements:Minimum 3 years of relevant HSE experience. NEBOSH IGC is a MUST. Experience in Overhead Transmission Line projects (OHTL) Saudi national.