Financial Analyst Jobs in Saudi

<div> <p> <strong>POSITION SUMMARY</strong> </p> <p> </p> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventative maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Record information for unfinished calls prior to shift change.</p> <p> </p> <p>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Ensure adherence to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.</p> <p> </p> <p><b>PREFERRED QUALIFICATIONS </b></p> <p>Education: Technical, Trade, or Vocational School Degree.</p> <p>Related Work Experience: At least 2 years of related work experience.</p> <p>Supervisory Experience: No supervisory experience. </p> <p>License or Certification: None </p> <p> </p> <p> </p> </div> <div> </div> <p> <i>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</i> </p>

<p>The Executive Technical Assistant PMO provides executive-level technical and operational support to the PMO leadership, ensuring the effective coordination, monitoring, and administration of strategic engineering and construction projects. The role serves as the central coordination point between executive management, project teams, consultants, and stakeholders by preparing technical documentation, monitoring project performance, coordinating meetings, and supporting project governance.</p><p>The ideal candidate possesses strong engineering knowledge combined with excellent organizational, analytical, and communication skills, enabling the PMO leadership to make informed and timely decisions.</p><p>Key Responsibilities:</p><ul><li>Provide executive and technical support to the PMO Director on strategic projects.</li><li>Coordinate with project managers, engineering teams, consultants, and contractors to ensure timely project delivery.</li><li>Prepare executive reports, presentations, meeting minutes, and technical documentation.</li><li>Monitor project schedules, milestones, risks, and action items using project management tools.</li><li>Track project performance and support the preparation of PMO dashboards and status reports.</li><li>Review engineering and project documents for completeness and accuracy.</li><li>Maintain project documentation, correspondence, and document control systems.</li><li>Follow up on executive decisions and ensure timely closure of assigned actions.</li><li>Support PMO governance, reporting, and continuous process improvement initiatives.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Degree in Civil Engineering, Architectural Engineering, Information Technology, or a related discipline.</p><p>Minimum 10 years of experience in technical support, project coordination, or PMO within engineering, consultancy, or construction organizations.</p><p>Strong understanding of engineering project lifecycles, including planning, design, project controls, and construction supervision.</p><p>Proficiency in Primavera P6, MS Project, Smartsheet, or similar project management software.</p><p>Advanced knowledge of Microsoft Office (Excel, Word, PowerPoint).</p><p>Experience with engineering software such as AutoCAD or Revit is an advantage.</p><p>Excellent organizational, communication, and stakeholder management skills.</p><p>Ability to manage multiple priorities and work effectively in a fast-paced project environment.</p>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >يبحث مجمع شرق جده الطبي عن <strong >أخصائي تقنية إشعاعية</strong> للانضمام إلى فريقه في جدة، مكة المكرمة. هذا الدور بدوام كامل ومخصص للمرشحين ذوي الخبرة من 0 إلى سنة واحدة، حيث سيتولى مسؤولية إجراء التصوير الإشعاعي للمرضى وضمان جودة الصور وسلامة الإجراءات.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >إعداد المرضى للتصوير وتهيئتهم في الأوضاع الصحيحة، مع تحديد واختيار الوسائل الواقية المناسبة.</li> <li >تشغيل أجهزة التصوير الشعاعي وتصوير الحالات المختلفة للمرضى والمصابين، ومراقبة حالتهم أثناء وبعد التصوير.</li> <li >تفقد وتجهيز أجهزة التحميض، ومراجعة الصور، وإجراء التحليل الأولي للتأكد من جودة التصوير.</li> <li >تطوير أساليب وإجراءات العمل ومواكبة التطورات الحديثة في تقنيات التصوير بالأشعة.</li> <li >إعداد الوثائق والتقارير المتخصصة المتعلقة بالتصوير الإشعاعي وحفظها في قاعدة البيانات المخصصة وفقاً للسياسات والإجراءات المنظمة.</li> <li >ضمان تطبيق مبادئ وقواعد السلامة العامة خلال جميع أعمال التصوير بالأشعة.</li> </ul> <h3 >المؤهلات والخبرة</h3> <ul > <li >خبرة عملية تتراوح من 0 إلى سنة واحدة في مجال تقنية الإشعاع.</li> <li >القدرة على التعامل مع أجهزة التصوير الشعاعي المختلفة.</li> <li >معرفة جيدة بإجراءات السلامة العامة في بيئة العمل الإشعاعي.</li> </ul> <h3 >بيئة العمل</h3> <p >يعمل أخصائي تقنية الإشعاع ضمن فريق مجمع شرق جده الطبي في مدينة جدة، مكة المكرمة، في بيئة عمل متكاملة تركز على تقديم رعاية صحية عالية الجودة للمرضى. الوظيفة بدوام كامل.</p> <h3 >معلومات إضافية</h3> <p >الراتب لهذا الدور سيتم تحديده ومناقشته خلال عملية المقابلة.</p></div>

Applus+ is a global leader in inspection, testing and certification services delivering innovative solutions across key industries including energy, construction, environment, and infrastructure. Operating in more than 70 countries. We are committed to helping clients achieve operation excellence while maintaining the highest safety and environmental standards. At Applus+ we foster a culture of integrity, technical leadership, and continuous professional development.<br><br>You will be responsible of supporting quality control activities by conducting inspections and maintaining records. In addition to ensuring compliance with quality standards and reporting non-conformances.<br><br>Requirements<br><br>QA/QC Technician4-7 years of experience QA/QC Experience in Infrastructure Projects<br><br>Responsibilities:<br><br>Conduct inspections and maintain QA/QC records Support implementation of quality plans Report non-conformances<br><br>Key Competencies:<br><br>Technical: QA/QC procedures, inspection Behavioral: Accuracy, discipline

<p><br></p><p><b>Responsibilities</b></p><p>jOB PURPOSE</p><p>Execution of assigned tasks and work orders related to all types of Electrical &amp; controls maintenance and any engineering related works in safe, good and cost-effective manner within the given time frames.</p><p>PRINCIPAL ACCOUNTABILITIES</p><ul><li>Achieving the Line availability &amp; Equipment readiness.</li><li>Follow &amp; review of PEMM (PepsiCo Maintenance Methodology) improvement plan throughout the year.</li><li>The overall responsibility for performing assigned Work Orders as well as any other tasks by the supervisor.</li><li>Solving technical problems and identifying the actions and parts requirement.</li><li>Executing the maintenance schedules to maintain the plant equipment with-in given engineering standards.</li><li>Maintain and implement AIB standards.</li><li>SAP PM &amp; CM Work orders status updates.</li><li>Identify the RCA of major and repeating problems.</li><li>Ensure all requirements of the safety policies are adhering too.</li><li>To implement, sustain and participate in the continual improvement of the EHS Management System (MS) at area of responsibility in accordance to the legislations, PepsiCo GEHSMS and relevant EHS &amp; Electrical standards, ensuring proper controls for all hazards and risks associated with all activities/areas are in place and EHS targets are achieved.</li><li>Perform assigned Work Orders as well as any other tasks assigned by the supervisor.</li><li>Respond to all technical problems within the assigned area and making sure proper actions are identified and taken.</li><li>Knowledge of spare parts description, application and criticality.</li><li>Adhere to EHS and QFS policies and standards.</li><li>Ensure proper controls for all hazards and risks associated with all activities are in place and EHS targets are achieved.</li><li>Operates all equipment related to Utilities sections.</li><li>Maintain accurate SAP-PM records and updates for all assigned Work Orders.</li><li>Performs required daily parameters reading and monitoring and as assigned by the supervisor.</li><li>Daily reporting of all shift activities.</li><li>Identify opportunities and support initiatives to improve production processes as assigned by Maintenance Supervisor in coordination with production personnel to improve quality, productivity, enhance safety or drive down costs.</li><li>Support the execution of the site Maintenance and Reliability M&amp;R Strategy to achieve World Class maintenance status.</li><li>Execute and follow the assigned actions related to PEMM (PepsiCo Maintenance Methodology) tool and MIAP (Maintenance Improvement Action Plan).</li><li>Support the implementation of Reliability Engineering tools and techniques to achieve Maintenance and Reliability M&amp;R KPI's.</li><li>Support executing Continuous Improvement CI initiatives and Failure Analysis techniques (e.g. Root Cause Analysis RCA).</li><li>Attend the Maintenance forum meetings to share Maintenance Performance, Best Practices, Challenges and achievements</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>Qualifications</h2><p>Knowledge / Skill</p><ul><li>Diploma in Electrical &amp; Electronics / Instrumentation Engineering.</li><li>Hands-on experience in electrical equipment troubleshooting, PLC, SCADA, Instrumentations and Controls.</li><li>LT &amp; MCC, feeder panels &amp; control panels working background</li><li>Electrical safety standards awareness</li><li>Maintenance Planning &amp; execution system</li><li>Awareness of Electrical safety standards as well as basic EHS systems.</li><li>Have knowledge in operating and automation systems.</li><li>Have Quality and Food Safety QFS systems and policies knowledge.</li><li>Environment, Health and Safety EHS systems and policies knowledge.</li><li>Can read and understand plans, diagrams, layouts and schematic drawings (in the field of qualification).</li><li>Knowledge in any Maintenance Management software (CMMS) is a plus.</li><li>Have a general knowledge and ability to use computers (MS office applications).</li><li>Has good command of English language (Reading, Writing and Speaking).</li><li>Basic computer skills of MS Office.</li><li>Electrical safety standard s accomplishment.</li></ul><p>Experience</p><ul><li>Minimum 2 years industrial experience is preferred.</li></ul><p>Competencies</p><ul><li>Analytical thinker, can lead modifications and small projects</li><li>Malfunctions and technical trouble shooting ability</li><li>Able to do electrical &amp; controls works independently</li><li>Able to do mechanical works independently &amp; support.</li><li>A team player with good collaboration and communications skills.</li><li>Flexible in tolerating to changes and accepting new ideas.</li><li>Capable of executing planned activities.</li><li>Able to do electrical &amp; controls works independently.</li><li>Can support and motivate others.</li></ul>

<p>The Field Engineer III Managed Pressure Drilling (MPD) is responsible for planning, executing, and optimizing Managed Pressure Drilling operations at customer well sites. The role provides advanced engineering expertise, operational leadership, and technical support to ensure safe, efficient, and reliable drilling performance while meeting customer expectations, company standards, and regulatory requirements. Working closely with customers, drilling contractors, and internal teams, the Field Engineer III serves as the primary engineering resource for complex onshore and offshore MPD projects.</p><p><b><br></b></p><p><b>Responsibilities:</b></p><ul><li>Lead the execution of Managed Pressure Drilling (MPD) operations in accordance with approved engineering programs, operational procedures, and HSE standards.</li><li>Provide real-time engineering support during drilling, tripping, casing running, cementing, and other well construction activities requiring MPD.</li><li>Monitor, analyze, and optimize drilling parameters, hydraulic performance, and pressure data to maintain wellbore pressure control.</li><li>Operate and oversee automated MPD control systems to maintain target bottom-hole pressure throughout drilling operations.</li><li>Develop engineering recommendations and operational adjustments based on real-time well conditions and technical analysis.</li><li>Support pre-job planning, hazard identification, risk assessments, and technical reviews with customers and internal stakeholders.</li><li>Supervise the rig-up, pressure testing, commissioning, troubleshooting, maintenance, and rig-down of MPD equipment.</li><li>Coordinate field activities with drilling supervisors, company representatives, rig personnel, and service providers to ensure seamless operations.</li><li>Investigate operational issues and equipment failures, perform root cause analysis, and implement corrective and preventive actions.</li><li>Prepare accurate daily operational reports, engineering analyses, end-of-well reports, and lessons learned documentation.</li><li>Ensure compliance with company HSE policies, customer requirements, API standards, and industry best practices.</li><li>Mentor and provide technical guidance to junior Field Engineers and Field Specialists.</li><li>Support equipment commissioning, new technology implementation, inventory management, and continuous improvement initiatives.</li><li>Maintain equipment readiness and support mobilization planning for upcoming projects.</li><li>Build and maintain strong customer relationships by delivering high-quality technical support and operational excellence.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Strong knowledge of Managed Pressure Drilling (MPD) technologies, equipment, and operational applications.</li><li>Thorough understanding of well control principles, drilling hydraulics, and surface back-pressure management.</li><li>Experience with Rotating Control Devices (RCD), MPD choke systems, Coriolis flow measurement systems, and automated MPD control systems.</li><li>Proficiency in hydraulic modeling, pressure analysis, and interpretation of real-time drilling data.</li><li>Ability to troubleshoot mechanical, hydraulic, electrical, instrumentation, and operational issues under demanding field conditions.</li><li>Knowledge of drilling data acquisition systems and digital drilling technologies.</li><li>Technical leadership and engineering decision-making.</li><li>Strong analytical and problem-solving capabilities.</li><li>Excellent communication, reporting, and customer engagement skills.</li><li>Project planning and operational coordination.</li><li>Risk assessment and mitigation.</li><li>Team leadership, mentoring, and coaching.</li><li>Strong commitment to HSE, quality, and operational excellence.</li><li>Ability to work effectively in high-pressure, remote, and rotational field environments.</li><li>Bachelor's degree in Petroleum Engineering, Mechanical Engineering, Chemical Engineering, or a related engineering discipline.</li><li>Minimum 7 years of oil and gas drilling experience, including at least 5 years in Managed Pressure Drilling (MPD) operations.</li><li>Demonstrated experience supporting complex onshore and offshore MPD projects.</li><li>Willingness to travel internationally and work rotational assignments in remote locations.</li><li>IWCF or IADC Well Control Certification (Supervisor Level).</li><li>Experience in HPHT, deepwater, extended-reach, depleted reservoir, and narrow-margin drilling environments.</li><li>Knowledge of Constant Bottom Hole Pressure (CBHP), Pressurized Mud Cap Drilling (PMCD), Mud Cap Drilling (MCD), and Managed Pressure Cementing.</li><li>H S, First Aid/CPR, BOSIET, and offshore survival certifications (as applicable).</li></ul>

This position is listed on behalf of a partner company, who manages all applications and next steps. Our partner is looking for a Technical Support Team Lead (Saa S | SQL) based in Saudi Arabia.<br><br>As a Technical Support Team Lead, you’ll lead a team of six technical support specialists responsible for a business-critical Saa S platform operating around the clock. You’ll combine people leadership with deep technical troubleshooting, serving as the primary escalation point before engineering. The role gives you ownership of team performance, support quality, coverage, and operational KPIs. You’ll work closely with engineering to eliminate recurring issues and build tools that allow support specialists to resolve more problems independently. Working across Azure, SQL Server, C#, Angular, and modern AI support tools, you’ll become a key technical authority for the platform and customer base. Reporting directly to senior leadership, you’ll have significant influence over how the support function evolves and performs.<br><br>Accountabilities<br><br>Directly manage and develop a team of six technical support specialists with varying levels of product knowledge and experience. Lead a support function operating across multiple time zones, including participation in mandatory daily team meetings at 8:00 am and 11:00 am Pacific Time. Coach team members, identify skill gaps, and develop capabilities that reduce unnecessary engineering escalations. Review the support ticket queue daily, guide prioritization, and own escalation decisions. Serve as the primary technical escalation point before engineering and determine appropriate ticket severity and priority. Lead major P1 and system-down incidents, coordinating response efforts, communicating with affected customers, and producing root-cause reports after resolution. Resolve escalated issues permanently through controlled support tooling, code fixes, or documented procedures whenever possible. Identify recurring support issues and partner with engineering to address their underlying root causes. Develop deep knowledge of the Saa S platform and customer environment to maximize first-line resolution. Partner with the Engineering Manager to prioritize and justify new support tooling and automation initiatives. Own support KPIs including open tickets, ticket age, backlog aging, First Response Time, Time to Resolution, reopen rate, repeat-escalation rate, and CSAT. Conduct quality assurance and case reviews, evaluating both resolution effectiveness and the quality of ticket documentation. Monitor stalled tickets and ensure specialists maintain appropriate follow-up and ownership. Champion AI-assisted support using tools such as Claude and Codex to improve troubleshooting, productivity, and team enablement. Own support procedures and documentation in Confluence and use quieter periods to strengthen the team's knowledge base. Contribute to occasional after-hours escalation management when genuine major incidents occur.<br><br>Requirements<br><br>10+ years of technical support experience in a Saa S or software environment.5+ years of experience leading or managing technical support teams. Strong hands-on knowledge of the Atlassian ecosystem, particularly Jira, Jira Service Management, and Confluence. Advanced practical experience with Microsoft SQL Server and confident SQL troubleshooting skills. Working knowledge of C#, with the ability to read backend code and reason about potential root causes. Proven experience coaching support specialists, managing performance, and conducting QA and case-quality reviews. Strong understanding of support KPIs and SLAs, including First Response Time, Time to Resolution, backlog aging, reopen rate, repeat-escalation rate, and CSAT. Sound judgment when assessing ticket severity, managing incidents, and determining when engineering escalation is necessary. Strong analytical and troubleshooting skills, with the ability to quickly develop deep knowledge of a complex Saa S platform and its customer base. Comfortable using AI tools to accelerate troubleshooting, documentation, and support enablement. Strong written and spoken English. Self-directed leadership style with the ability to establish clear priorities, expectations, and direction for the team. Ability to work effectively across time zones and collaborate closely with engineering and senior leadership. Familiarity with Git Hub or other source-control systems is a plus. Exposure to Angular is advantageous. French and/or Spanish language skills are a plus. Familiarity with SSO technologies such as SAML or OAuth is beneficial.<br><br>Benefits<br><br>Fully remote position. Leadership responsibility for a six-person technical support team. Significant ownership of a 24/7 Saa S support function and its operational performance. Opportunity to serve as the team's senior technical authority and primary escalation point before engineering. Direct collaboration with engineering to improve tooling, automation, and support processes. Exposure to a Microsoft technology stack including Azure, SQL Server, C#, and Angular. Opportunity to work with modern AI-assisted support tools such as Claude and Codex. Direct visibility and collaboration with senior company leadership. Opportunity to shape support processes, knowledge management, quality standards, and team development. High-impact role focused on improving platform reliability, customer experience, and support efficiency.<br><br>How Jobgether Works<br><br>We use an AI-powered matching process to ensure your application is reviewed quickly, objectively, and fairly against the role's core requirements. Our system identifies the top-fitting candidates, and this shortlist is then shared directly with the hiring company. The final decision and next steps (interviews, assessments) are managed by their internal team.<br><br>We appreciate your interest and wish you the best!<br><br> Why Apply Through Jobgether?<br><br>Data Privacy Notice: By submitting your application, you acknowledge that Jobgether will process your personal data to evaluate your candidacy and share relevant information with the hiring employer. This processing is based on legitimate interest and pre-contractual measures under applicable data protection laws (including GDPR). You may exercise your rights (access, rectification, erasure, objection) at any time.<br><br>We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

<h3 >About the Role</h3> <p >Silah Tamkeen is seeking an <strong >Engineering Technical Trainer</strong> to deliver high-quality theoretical and practical training across various engineering disciplines. This full-time position is based in 'Asir, Saudi Arabia, and requires 2-5 years of relevant experience.</p> <h3 >Key Responsibilities</h3> <ul > <li >Deliver high-quality theoretical and practical training across various engineering disciplines.</li> <li >Develop structured training materials, lesson plans, presentations, and practical exercises.</li> <li >Provide practical instruction in engineering drawing, drafting techniques, and engineering design applications.</li> <li >Deliver hands-on training using AutoCAD, 3ds Max, and Revit.</li> <li >Demonstrate engineering design and drafting applications relevant to each discipline.</li> <li >Conduct theoretical and practical assessments to evaluate trainees’ engineering competencies.</li> <li >Monitor trainee performance and provide engineering guidance and constructive feedback.</li> <li >Maintain accurate training records and prepare progress and performance reports.</li> <li >Ensure training delivery aligns with relevant engineering standards and industry best practices.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Bachelor’s degree in Engineering.</li> <li >Minimum of 2 years of experience in engineering training.</li> <li >Proven hands-on experience with AutoCAD, 3ds Max, and Revit.</li> <li >Practical experience in engineering drafting and design across multiple engineering disciplines, preferably including: <ul > <li >Civil Engineering</li> <li >Architectural Engineering</li> <li >Structural Engineering</li> <li >Electrical Engineering</li> <li >Mechanical Engineering</li> <li >Road &amp; Infrastructure Engineering</li> <li >HVAC &amp; Plumbing Engineering</li> </ul> </li> </ul> <h3 >Required Skills</h3> <ul > <li >Strong communication, presentation, and instructional skills.</li> <li >Ability to deliver effective theoretical and practical engineering training.</li> </ul> <h3 >Work Type</h3> <p >This is a full-time position.</p> <h3 >Application Process</h3> <p >Interested candidates are encouraged to apply. Salary details will be discussed during the interview process.</p>

Technical Draftsman – Shop Drawings (Marble & Interior Finishing)???? Riyadh, Saudi Arabia | Full-Time | On-Site<br>About Dar Almasalla Dar Almasalla is a Saudi company specializing in marble fabrication, custom marble works, sanitary solutions, and interior finishing projects. Our work combines technical accuracy, modern production methods, and skilled craftsmanship to deliver high-quality residential and commercial projects.<br>Role Overview We are looking for a Technical Draftsman to join our technical team in Riyadh. The role is primarily responsible for preparing accurate shop drawings, fabrication drawings, and technical details for marble, stone, and interior finishing works based on architectural drawings, site measurements, approved designs, and project requirements. The ideal candidate should have strong Auto CAD skills, good technical understanding, and the ability to convert design concepts and site information into clear drawings suitable for production and installation.<br>Key Responsibilities Prepare detailed shop drawings based on architectural drawings, design drawings, and project specifications. Prepare fabrication and production drawings for marble, granite, natural stone, and related finishing works. Develop plans, elevations, sections, details, and enlarged technical drawings as required. Prepare accurate dimensions, joint locations, edge details, openings, cut-outs, and installation details. Convert approved designs and site measurements into production-ready drawings. Review architectural and structural drawings and identify discrepancies before production. Coordinate drawings with site conditions, sanitary fixtures, plumbing points, electrical requirements, and other related works. Revise shop drawings based on consultant, client, site, or internal technical comments. Coordinate with estimation, production, site, design, and project teams. Prepare cutting details, piece identification, and production information when required. Ensure drawings are technically accurate and practical for fabrication and installation. Maintain proper drawing revisions, records, and document control. Support the production team by clarifying drawing details and resolving technical issues when required.<br>Qualifications Diploma or Bachelor's degree in Civil Engineering, Architecture, Drafting, or a related technical field. Proven experience preparing shop drawings and technical drawings. Strong proficiency in Auto CAD is required. Strong ability to read and interpret architectural and technical drawings. Good understanding of dimensions, sections, elevations, construction details, and installation requirements. High attention to detail and dimensional accuracy. Ability to coordinate between drawings, site conditions, and production requirements. Good organizational skills and ability to manage multiple drawings and revisions. Ability to communicate effectively with technical, production, and site teams. Experience with marble, granite, natural stone, interior finishing, fit-out, kitchens, sanitary works, or similar industries is highly preferred. Experience working in Saudi Arabia or the GCC is an advantage. Knowledge of Sketch Up, Revit, or other drafting/design software is an advantage.

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تعلن شركة سابا الطبية عن حاجتها لأخصائي تقنية إشعاعية للانضمام إلى فريقها في مدينة جدة، بمنطقة مكة المكرمة. يهدف هذا الدور بدوام كامل إلى ضمان تقديم خدمات تصوير إشعاعي عالية الجودة، من خلال إعداد المرضى وتصويرهم، بالإضافة إلى إدارة الصور والتقارير المتعلقة بها.</p> <h3 >الغرض من الوظيفة</h3> <p >يتولى أخصائي تقنية الإشعاع مسؤولية تجهيز المرضى لإجراءات التصوير الشعاعي، وتنفيذ عمليات التصوير بدقة، وضمان جودة الصور الناتجة. كما يشمل الدور مهام حفظ وتوثيق الصور الشعاعية والمواد والتقارير الطبية، مع الالتزام بمعايير السلامة والجودة.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >إعداد المرضى للتصوير وتهيئتهم وفق الأوضاع السليمة، وتحديد واختيار الوسائل الواقية المناسبة.</li> <li >تفقد وتشغيل أجهزة التصوير الشعاعي، وتصوير الحالات المختلفة للمرضى والمصابين، ومراقبة حالتهم أثناء وبعد التصوير.</li> <li >تفقد وتجهيز أجهزة التحميض، ومراجعة الصور، وإجراء التحليل الأولي للتأكد من جودة التصوير.</li> <li >تطوير أساليب وإجراءات العمل ومواكبة التطورات الحديثة في تقنيات التصوير بالأشعة.</li> <li >إعداد الوثائق والتقارير المتخصصة المتعلقة بالتصوير الإشعاعي، وحفظها في قاعدة البيانات المخصصة وفقاً للسياسات والإجراءات المنظمة.</li> <li >ضمان تطبيق مبادئ وقواعد السلامة العامة أثناء القيام بجميع أعمال التصوير بالأشعة.</li> </ul> <h3 >المؤهلات والخبرات</h3> <ul > <li >خبرة تتراوح بين <strong >0 إلى 1 سنة</strong> في مجال تقنية الإشعاع أو ما يعادله.</li> </ul> <h3 >موقع العمل</h3> <p >يقع مقر العمل لهذه الوظيفة بدوام كامل في مدينة <strong >جدة</strong>، ضمن منطقة مكة المكرمة.</p> <h3 >معلومات إضافية</h3> <p >هذه فرصة للانضمام إلى فريق طبي متخصص والمساهمة في تقديم رعاية صحية متميزة. سيتم تحديد الراتب بناءً على المؤهلات والخبرة.</p></div>

Additional Information<br><br>Job Number 26118064<br><br>Job Category Engineering & Facilities<br><br>Location Central Area District North of Al Masjid Al Nabawi, Madinah, Saudi Arabia, Saudi Arabia,VIEW ON MAP<br><br>Schedule Full Time<br><br>Located Remotely? N<br><br>Position Type Non-Management<br><br>Position Summary<br><br>Apply paint, stain and other finishes to property walls, ceilings, and furniture using brushes, spray guns, or rollers. Apply primers or sealers to prepare new surfaces for finish coats. Remove old finishes by stripping, sanding, wire brushing, burning, or using water and/or abrasive blasting. Cover surfaces with appropriate material for protection during painting and post appropriate paint signs. Clean up and store paint and painting tools and equipment in appropriate areas. Coordinate with vendor in order to modify colors of paint, stain, or varnish.<br><br>Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Speak with others using clear and professional language. Support team to reach common goals. Ensure adherence to quality expectations and standards. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move up and down a ladder. Grasp, turn, and manipulate objects of varying size and weight. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Stand, sit, or walk for an extended period of time. Perform other reasonable job duties as requested by Supervisors.<br><br>Preferred Qualifications<br><br>Education: Technical, Trade, or Vocational School Degree.<br><br>Related Work Experience: At least 1 year of related work experience.<br><br>Supervisory Experience: No supervisory experience.<br><br>License or Certification: None<br><br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates.  We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.

Additional Information<br><br>Job Number 26118064<br><br>Job Category Engineering & Facilities<br><br>Location Central Area District North of Al Masjid Al Nabawi, Madinah, Saudi Arabia, Saudi Arabia,VIEW ON MAP<br><br>Schedule Full Time<br><br>Located Remotely? N<br><br>Position Type Non-Management<br><br>Position Summary<br><br>Apply paint, stain and other finishes to property walls, ceilings, and furniture using brushes, spray guns, or rollers. Apply primers or sealers to prepare new surfaces for finish coats. Remove old finishes by stripping, sanding, wire brushing, burning, or using water and/or abrasive blasting. Cover surfaces with appropriate material for protection during painting and post appropriate paint signs. Clean up and store paint and painting tools and equipment in appropriate areas. Coordinate with vendor in order to modify colors of paint, stain, or varnish.<br><br>Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Speak with others using clear and professional language. Support team to reach common goals. Ensure adherence to quality expectations and standards. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move up and down a ladder. Grasp, turn, and manipulate objects of varying size and weight. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Stand, sit, or walk for an extended period of time. Perform other reasonable job duties as requested by Supervisors.<br><br>Preferred Qualifications<br><br>Education: Technical, Trade, or Vocational School Degree.<br><br>Related Work Experience: At least 1 year of related work experience.<br><br>Supervisory Experience: No supervisory experience.<br><br>License or Certification: None<br><br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates.  We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.

Additional Information<br><br>Job Number 26118064<br><br>Job Category Engineering & Facilities<br><br>Location Central Area District North of Al Masjid Al Nabawi, Madinah, Saudi Arabia, Saudi Arabia,VIEW ON MAP<br><br>Schedule Full Time<br><br>Located Remotely? N<br><br>Position Type Non-Management<br><br>Position Summary<br><br>Apply paint, stain and other finishes to property walls, ceilings, and furniture using brushes, spray guns, or rollers. Apply primers or sealers to prepare new surfaces for finish coats. Remove old finishes by stripping, sanding, wire brushing, burning, or using water and/or abrasive blasting. Cover surfaces with appropriate material for protection during painting and post appropriate paint signs. Clean up and store paint and painting tools and equipment in appropriate areas. Coordinate with vendor in order to modify colors of paint, stain, or varnish.<br><br>Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Speak with others using clear and professional language. Support team to reach common goals. Ensure adherence to quality expectations and standards. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move up and down a ladder. Grasp, turn, and manipulate objects of varying size and weight. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Stand, sit, or walk for an extended period of time. Perform other reasonable job duties as requested by Supervisors.<br><br>Preferred Qualifications<br><br>Education: Technical, Trade, or Vocational School Degree.<br><br>Related Work Experience: At least 1 year of related work experience.<br><br>Supervisory Experience: No supervisory experience.<br><br>License or Certification: None<br><br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates.  We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.

Additional Information<br><br>Job Number 26118064<br><br>Job Category Engineering & Facilities<br><br>Location Central Area District North of Al Masjid Al Nabawi, Madinah, Saudi Arabia, Saudi Arabia,VIEW ON MAP<br><br>Schedule Full Time<br><br>Located Remotely? N<br><br>Position Type Non-Management<br><br>Position Summary<br><br>Apply paint, stain and other finishes to property walls, ceilings, and furniture using brushes, spray guns, or rollers. Apply primers or sealers to prepare new surfaces for finish coats. Remove old finishes by stripping, sanding, wire brushing, burning, or using water and/or abrasive blasting. Cover surfaces with appropriate material for protection during painting and post appropriate paint signs. Clean up and store paint and painting tools and equipment in appropriate areas. Coordinate with vendor in order to modify colors of paint, stain, or varnish.<br><br>Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Speak with others using clear and professional language. Support team to reach common goals. Ensure adherence to quality expectations and standards. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move up and down a ladder. Grasp, turn, and manipulate objects of varying size and weight. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Stand, sit, or walk for an extended period of time. Perform other reasonable job duties as requested by Supervisors.<br><br>Preferred Qualifications<br><br>Education: Technical, Trade, or Vocational School Degree.<br><br>Related Work Experience: At least 1 year of related work experience.<br><br>Supervisory Experience: No supervisory experience.<br><br>License or Certification: None<br><br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates.  We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.

<p>Eram Talent is seeking a creative and technically skilled IT Support Assistant Graphic Design Background to provide IT support services while delivering high-quality graphic design solutions for digital and print media. Reporting to the IT Supervisor/Operations Manager, the role supports the maintenance of IT systems, software, and documentation while creating visually engaging content that enhances internal and external communications. The successful candidate will assist with troubleshooting IT issues, maintaining data backups, preparing system documentation, and designing creative assets including presentations, brochures, social media graphics, advertisements, and other digital content. The ideal candidate has 3 5 years of relevant experience in IT support with a strong background in graphic design.</p><p><strong>Key Responsibilities</strong></p><ul><li>Provide first-level IT support for hardware, software, and system-related issues.</li><li>Assist in maintaining computer programs, applications, system documentation, and operational procedures.</li><li>Design creative layouts using typography, color, imagery, and branding guidelines.</li><li>Produce high-quality visual assets for print and digital platforms, including brochures, presentations, banners, social media graphics, advertisements, and marketing materials.</li><li>Collaborate with stakeholders to understand project requirements and deliver creative solutions.</li><li>Support website and digital content updates when required.</li><li>Troubleshoot minor computer hardware, software, and network-related issues.</li><li>Maintain data backups and support portal administration activities.</li><li>Prepare reports, presentations, and documentation for management review.</li><li>Assist senior IT personnel with software configuration, system maintenance, and technical support activities.</li><li>Handle service requests, trouble reports, and documentation with minimal supervision.</li><li>Ensure compliance with organizational IT policies, security procedures, and branding standards.</li><li>Perform other related IT and creative support duties as assigned.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Diploma or Bachelor's degree in Computer Science, Information Technology, Graphic Design, Multimedia, or a related field. 3 5 years of experience in IT support with a strong graphic design background. Proficiency in Adobe Creative Suite (Photoshop, Illustrator, InDesign) and other graphic design tools. Experience with Microsoft Office, particularly PowerPoint for presentation design. Basic knowledge of computer hardware, software installation, troubleshooting, and system support. Familiarity with website content management systems (CMS) and digital media is an advantage. Strong understanding of branding, typography, layout design, and visual communication. Excellent organizational and multitasking skills with the ability to manage multiple projects simultaneously. Strong verbal and written communication skills in English. Ability to work independently while collaborating effectively with cross-functional teams. Experience supporting engineering, technical, or corporate environments is preferred.</p>

<p><b>Job Description:</b></p><p>7-10 years of experience in ship maintenance in dry docks , Hull, Deck and tanks extra….</p><p><br></p><p><b>Knowledge &amp; Qualification:</b></p><p>N/A</p><p>Role &amp; Responsibilities:</p><p>Must have detail knowledge &amp; experience in Project control and cost control / MS office and XL</p><p>Should be well versed with KSA norms and regulation&nbsp;</p><p><strong>Desired Candidate Profile</strong></p><p>Must have detail knowledge &amp; experience in Project control and cost control / MS office and XL Should be well versed with KSA norms and regulation</p>

<p>Install, maintain, and repair electrical wiring, fixtures, equipment, and control systems. Read and interpret electrical drawings, blueprints, and technical diagrams. Diagnose electrical faults and perform troubleshooting to identify and resolve issues. Inspect electrical systems to ensure compliance with safety codes and regulations. Test electrical systems and components using specialized tools and equipment. Replace defective electrical components and wiring. Perform preventive maintenance on electrical equipment. Ensure a safe working environment by following health and safety procedures. Maintain accurate records of work completed, inspections, and maintenance activities. Coordinate with supervisors, engineers, and other trades to complete projects efficiently.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent; technical or vocational certification in electrical work is preferred.</li><li>Valid electrician license or certification (where required).</li><li>Proven experience as an electrician in residential, commercial, or industrial environments.</li><li>Strong knowledge of electrical systems, wiring, and safety regulations.</li><li>Ability to read electrical schematics and blueprints.</li><li>Proficiency in using electrical testing and diagnostic equipment.</li><li>Good problem-solving and troubleshooting skills.</li><li>Physical ability to work at heights, in confined spaces, and lift heavy equipment.</li><li>Strong communication and teamwork skills</li></ul>

<h3 >About Almarai</h3> <p >Almarai is recognized as the world’s largest vertically integrated dairy company and the leading food and beverage manufacturing and distribution company in the region. Headquartered in the Kingdom of Saudi Arabia, Almarai holds the position of the #1 FMCG Brand in the MENA region and is a market leader across all its categories within the GCC. The company employs over 41,000 individuals, serving approximately 110,000 retail outlets, and reported a net income of SAR * Billion on sales of SAR ** Billion in 2022. Ongoing expansion programs and strategic acquisitions in new vertical markets contribute to a dynamic environment, offering opportunities to join a multinational team dedicated to furthering the group's growth plans.</p> <h3 >The Role of Technical Trainer (Manufacturing)</h3> <p >Almarai is seeking a full-time Technical Trainer (Manufacturing) to join its operations in Al-Kharj. This role is focused on providing essential learning, development, and competency assessment for Engineering staff. The successful candidate will work within the framework of Operations business needs and in conformance with overall Corporate learning and development objectives, specifically targeting Dairy and Bakery production maintenance and Engineering utilities.</p> <h3 >Key Responsibilities</h3> <ul > <li >Deliver learning and development programs to Engineering staff.</li> <li >Conduct competency assessments for personnel involved in Dairy and Bakery production maintenance.</li> <li >Provide training and assessment for staff working with Engineering utilities.</li> <li >Ensure all training and development activities align with Operations business requirements.</li> <li >Adhere to the corporate learning and development objectives in all training initiatives.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of <strong >2 to 5 years of relevant experience</strong> is required for this position.</li> </ul> <h3 >Compensation and Benefits</h3> <p >Almarai offers a comprehensive package to its employees. This includes a competitive remuneration package, generous leave entitlements, and medical coverage. Additionally, employees may be eligible for a discretionary bonus, alongside opportunities for continuous training and professional development.</p> <h3 >Joining Almarai</h3> <p >This role presents an opportunity to contribute to a successful and expanding global business. The company's growth trajectory creates a supportive environment for professionals looking to develop their careers within a leading food and beverage organization.</p>

<h3 >Role Overview: Member of Technical Staff, Legal Research</h3> <p >Hired is recruiting for a <strong >Member of Technical Staff, Legal Research</strong> on behalf of a client, a global leader in the Software Development industry. This is a full-time position located in <strong >Saudi Arabia</strong>, with a salary range of <strong >$350,000 to $500,000 per year</strong>. The role involves working at the intersection of legal expertise and technical development to ensure product compliance and innovation.</p> <h3 >About the Position</h3> <p >The individual in this role will research and analyze complex legal and regulatory frameworks. This work is critical for supporting product development and compliance initiatives within the client's technology solutions. The position requires developing technical solutions to address legal research challenges and ensuring alignment with evolving legal standards in the software development sector.</p> <h3 >Key Responsibilities</h3> <ul > <li >Research and interpret laws, regulations, and case law to inform product decisions.</li> <li >Develop technical frameworks and tools to automate legal research processes.</li> <li >Collaborate with cross-functional teams to integrate legal insights into product design.</li> <li >Evaluate emerging legal trends and their potential impact on technology solutions.</li> <li >Draft technical documentation and guidelines for legal compliance in product development.</li> </ul> <h3 >Experience Requirements</h3> <p >Candidates for this position should have <strong >2-5 years of experience</strong> in a relevant field. This experience should demonstrate a strong background in legal research, regulatory analysis, or technical roles supporting legal compliance, preferably within a software development context.</p> <h3 >Contribution to Product Development</h3> <p >This role contributes to the development of technology solutions designed to meet complex legal and regulatory requirements. The Member of Technical Staff, Legal Research will play a key role in shaping products that effectively balance innovation with necessary compliance standards, directly impacting the client's offerings in the global software development industry.</p> <h3 >Equal Opportunity Employer</h3> <p >Hired is an equal opportunity employer. Hiring decisions are based on skills and expertise. All qualified candidates are welcome to apply regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Description</span><br><span></span><p><span><b><span><strong><u>ROLES</u></strong></span><span><strong><u>AND</u></strong></span><span><strong><u>RESPONSIBILITIES:</u></strong></span></b></span></p><br><p><span><span><strong>Operational: </strong></span></span></p><br><p><span><span>·</span></span><span><span>Install, configure, maintain, and troubleshoot CCTV cameras, NVRs, DVRs, video management systems, and related surveillance equipment installed on drilling rigs.</span></span></p><br><p><span><span>·</span></span><span><span>Perform routine inspections and preventive maintenance of CCTV systems to ensure continuous operation and compliance with company standards.</span></span></p><br><p><span><span>·</span></span><span><span>Diagnose and resolve hardware, software, network, and communication issues related to surveillance systems.</span></span></p><br><p><span><span>·</span></span><span><span>Configure IP cameras, network switches, fiber media converters, wireless bridges, and associated communication equipment.</span></span></p><br><p><span><span>·</span></span><span><span>Support the installation and commissioning of new cameras and surveillance systems on newly built and existing rigs.</span></span></p><br><p><span><span>·</span></span><span><span>Configure and maintain live streaming and remote access solutions for authorized users and management personnel.</span></span></p><br><p><span><span>·</span></span><span><span>Ensure all CCTV systems comply with SANAD, Saudi Aramco, and cybersecurity requirements.</span></span></p><br><p><span><span>·</span></span><span><span>Assist in investigations by retrieving, exporting, and preserving video footage when requested by management or HSE departments.</span></span></p><br><p><span><span>·</span></span><span><span>Provide technical support and user training regarding CCTV monitoring systems and video retrieval procedures.</span></span></p><br><p><span><span>·</span></span><span><span>Support integration of CCTV systems with other security and monitoring platforms where applicable.</span></span></p><br><p><span><span>·</span></span><span><span>Install, configure, maintain, and troubleshoot facility access control systems, including card readers, biometric readers, access control panels, door controllers, and electronic locking systems.</span></span></p><br><p><span><span><strong>Operational</strong></span><span><strong>(General):</strong></span></span></p><br><p><span><span>·</span></span><span><span>Provide assistance to SANAD business units on issues related to CCTV and surveillance systems.</span></span></p><br><p><span><span>·</span></span><span><span>Participate in routine inspections to ensure the highest safety and quality standards are maintained.</span></span></p><br><p><span><span>·</span></span><span><span>Comply with company HSE policies and procedures while working on drilling rigs and remote locations.</span></span></p><br><p><span><span>·</span></span><span><span>Support the organization during emergency situations and operational incidents when required.</span></span></p><br><p><span><span>·</span></span><span><span>Perform any maintenance activities assigned by management both onsite and remotely.</span></span></p><br><p><span><span>·</span></span><span><span>Remain up to date with the Company's business environment and the role's responsibilities to identify potential opportunities and challenges.</span></span></p><br><p><span><span>·</span></span><span><span>Contribute to the execution of departmental activities as required to ensure business continuity during the absence of team members.</span></span></p><br><br> <br> <span>Qualifications</span><br><span></span><p><span><span><strong><u>JOB</u></strong></span><span><strong><u>QUALIFICATIONS</u></strong></span><span><strong><u>AND</u></strong></span><span><strong><u>REQUIREMEN:</u></strong></span></span><span><b><span><strong>TS</strong></span></b></span></p><br><p><span><b><span><strong>Knowledge</strong></span><span><strong>and </strong></span><span><strong>Experience:</strong></span></b></span></p><br><p><span><span>Minimum</span><span>of</span><span>2–5</span><span>years</span><span>of</span><span>relevant</span><span>experience</span><span>in</span><span>CCTV,</span><span>surveillance,</span><span>networking,</span><span>and</span><span>security </span><span>systems.</span></span></p><br><p><span><b><span><strong>Education</strong></span><span><strong>and </strong></span><span><strong>Certifications:</strong></span></b></span></p><br><p><span><span>Diploma</span><span>or</span><span>Bachelor's</span><span>Degree</span><span>in</span><span>Electronics,</span><span>Information</span><span>Technology,</span><span>Telecommunications, Instrumentation, or related field.</span></span></p><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>