Embedded Systems Engineer Jobs in Saudi

Job Opportunity at Bits Arabia Company. Job Description Position Title: Network & IPTV Engineer Location:???? Jeddah, Saudi Arabia Description Experienced Network Engineer with strong expertise in enterprise networking, network security, and IPTV infrastructure within high-availability hospitality environments. Responsible for the design, deployment, administration, troubleshooting, and optimization of Cisco Meraki, Aruba, and Fortinet firewall. Key Duties and Tasks Design, deploy, configure, and maintain Cisco Meraki and Aruba network infrastructure. Deploy, configure, and maintain Fortinet firewalls, including security policies, VPNs, and threat prevention features. Monitor network performance, availability, and security across enterprise environments. Manage and support end-to-end IPTV systems, including headend equipment, streamers, middleware, and content distribution networks. Perform advanced troubleshooting and root cause analysis (RCA) for network outages, IPTV service interruptions, and performance issues. Plan and execute network and IPTV hardware refresh projects. Implement network security best practices and ensure compliance with organizational standards. Maintain accurate network diagrams, configuration records, and technical documentation. Coordinate with vendors, service providers, and internal teams for upgrades, maintenance, and issue resolution. Ensure service continuity and adherence to defined Service Level Agreements (SLAs). Support multicast networking, video streaming technologies, and hospitality-specific network requirements. Participate in infrastructure improvement initiatives and technology upgrades. Experience Hands-on experience with Cisco Meraki wireless, switching, and security solutions. Strong operational experience with Aruba networking products, including switches and wireless infrastructure. Proven expertise in Fortinet firewall administration, VPN implementation, and network security management. Practical experience managing IPTV platforms, video streaming systems, middleware, and content delivery services. Extensive experience troubleshooting complex enterprise network environments. Familiarity with multicast routing, VLANs, QoS, network monitoring, and performance optimization. Experience working in hospitality, hotel, resort, or other high-availability environments is highly preferred. Ability to work effectively in fast-paced operational environments with strong attention to detail and problem-solving skills.

<h3 >About Ma'aden and the Role</h3> <p >Ma'aden – Saudi Arabian Mining Company, established in 1997, is a prominent multi-commodity mining and metals company in the Middle East. The company is a key contributor to the development of the mining industry, aiming to establish it as a core pillar of Saudi Arabia’s economy through a fully integrated mining value chain. We are seeking a <strong >Production Engineer</strong> to join our team in a full-time capacity.</p> <h3 >Role Purpose</h3> <p >The Production Engineer is responsible for planning and coordinating the availability and utilization of personnel, supplies, and equipment. This role ensures efficient mine operations are maintained in alignment with statutory, safety, and environmental conditions. The position contributes directly to operational effectiveness and adherence to regulatory standards.</p> <h3 >Core Responsibilities: Resource and Extraction Planning</h3> <ul > <li >Test the validity of minable resources through preliminary surveys conducted in collaboration with geologists.</li> <li >Determine the feasibility of ore extraction based on resource assessments.</li> <li >Identify and implement suitable ore extraction methods, considering factors such as overburden depth, altitude, deposit characteristics, and surrounding strata.</li> <li >Plan and coordinate the deployment of labor, supplies, and equipment to optimize operational efficiency and ensure compliance with statutory, safety, and environmental regulations.</li> </ul> <h3 >Core Responsibilities: Engineering and Commercial Analysis</h3> <ul > <li >Consult with geologists, metallurgists, and other engineers regarding mining machines, facilities, systems, infrastructure, and environmental protection or restoration initiatives.</li> <li >Prepare operating and project estimates, assess capital and operating viability, and manage expenditure during production phases.</li> <li >Participate in negotiations related to mine purchases or investments.</li> <li >Analyze environmental sensitivities associated with processes, waste, chemicals, environmental and cultural factors, and geopolitical considerations.</li> </ul> <h3 >Core Responsibilities: Reporting and HSE Compliance</h3> <ul > <li >Analyze and compile monthly and yearly statistical production reports for management review and information.</li> <li >Monitor adherence to Ma'aden's Health, Safety, and Environment (HSE) programs, policies, and procedures.</li> <li >Provide guidance and recommendations to address unsafe or damaging work practices.</li> <li >Investigate incidents within the assigned work area, provide recommendations or responses, and brief contractors on applicable HSE regulations.</li> </ul> <h3 >Qualifications and Experience</h3> <p >Candidates for the Production Engineer position are required to have <strong >5 to 10 years of relevant experience</strong> in a production engineering role, preferably within the mining sector. A strong understanding of mine operations, resource planning, and HSE protocols is essential for this role.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p>Parsons is seeking a highly experienced Senior Civil Engineer to join our growing team in Tabuk. In this role, you will provide senior-level technical expertise, oversight, and design coordination for massive infrastructure and site development projects. You will be responsible for leading civil engineering design reviews, managing infrastructure master planning elements, and ensuring that construction activities strictly align with project specifications, international codes, and safety standards.</p><p>What You ll Be Doing</p><ul><li>Lead and oversee civil engineering design elements, including site grading, drainage systems, roadways, earthworks, and wet utility networks.</li><li>Perform comprehensive technical reviews of contractor submittments, shop drawings, calculation reports, and material specifications.</li><li>Provide strategic guidance and technical mentorship to junior engineers and design teams, ensuring a high standard of deliverable quality.</li><li>Coordinate extensively with cross-functional teams (structural, mechanical, electrical, and project management) to resolve interface conflicts and ensure smooth multidisciplinary integration.</li><li>Act as a key technical liaison with clients, stakeholders, and local municipal authorities to facilitate design approvals and project alignment.</li><li>Conduct site visits and engineering audits to monitor progress, resolve complex field issues, and ensure strict compliance with approved designs.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree in Civil or related Engineering field from an accredited university.</li><li>Professional Engineer (PE), Chartered Engineer (CEng), or equivalent professional registration is highly preferred.</li><li>Minimum of 12 years of progressive civil engineering experience, with significant exposure to large-scale infrastructure mega-projects, land development..</li><li>Advanced proficiency in civil engineering design software, including Civil 3D, AutoCAD, and various hydraulic modeling tools.</li><li>Deep understanding of international standards (AASHTO, ASTM) and the Saudi Building Code (SBC).</li><li>Strong leadership, negotiation, and communication skills in English.</li><li>Ability to effectively present technical strategies to clients and project executives.</li><li>Arabic language capability is advantageous.</li><li>Exceptional analytical and problem-solving skills, with a proven ability to deliver results within tight schedules on high-profile developments in Tabuk.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Please submit your CV in English and indicate your level of English proficiency.<br> Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems.<br> Participation is project-based, not permanent employment.<br> What this opportunity involves We're building a dataset to evaluate AI coding agents - how well a model handles real-world developer tasks.<br> You'll create challenging tasks and evaluation criteria within realistic simulated environments: Build realistic developer environments - a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history Design tasks from intermediate states of these environments - craft the prompt, define what "solved" means, and ensure the task is solvable by an AI agent Write tests that verify agent solutions - accept all valid approaches and reject incorrect ones, neither too strict nor too lenient Iterate on tasks and tests based on QA feedback - review agent solutions, analyze failures, and refine until the evaluation is fair and robust What this is NOT Not data labeling Not prompt engineering Not writing code from scratch - the agent writes most of the code; you guide and evaluate What we look for 5+ years in software development Core stack: Python (FastAPI), JavaScript/TypeScript (React), Docker, Postgres, Kafka, Redis Experience writing tests (functional, integration) English proficiency - B2+ Why this is hard Frontier models are already good at coding.<br> Creating a task that genuinely challenges the best models is non-trivial.<br> You need to deeply understand where models fail and what scenarios reveal the difference between a good and a bad solution.<br> Tasks have many valid solutions - writing tests that accept all correct solutions and reject incorrect ones is harder than it sounds.<br> How it works Apply → Pass qualification(s) → Join a project → Complete tasks → Get paid Compensation Up to $50/hr equivalent , depending on level and pace.<br> Tasks are estimated at ~20 hours each; you set your own schedule.<br></span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

We have an exciting opportunity for a "Engineer 1 - Electrical Engineering " with our client in Saudi Arabia . Interested candidates are encouraged to send their CV to navika.srivastava@lancesoft.com<br>**Job Title:** Engineer 1 - Electrical Engineering**Location:** King Abdullah bin Abdul Aziz Science Park (KASP), Saudi Technology & Innovation Center, Dhahran Techno Valley, Dhahran 04 31261, Saudi Arabia**Contract Duration:** 12 Months<br>Description:Role Summary:- Will be responsible for providing expert technical input and organizational input to electrical engineering activities on a wide range of projects from studies and design to troubleshooting, commissioning, and decommissioning<br>Essential Responsibilities:-<br>* Primarily responsibility is to create electrical control cabinet design with all necessary documentation according to industry and customer requirements.* Use Micro Station CAD, Autodesk Inventor software to create, revise, review Project Drawings (System Interconnect, Power wiring, Layout drawings, Loop drawings, blocks, etc.)* Compliance to customer specifications for Hardware / Cabinets* Knowledge of industry codes and standards (IEEE, ANSI, NEC, IEC, NFPA).* Assist Project Engineer in customer witness testing of Hardware / Cabinet design functionality.* Follow quality procedures and standard design processes.* Develop detailed bills of material for panels.* Specify parts and develop ordering drawings. Update PE with job completion estimates and status* Provide performance based and economic evaluations, selection, application, troubleshooting and maintenance practices of protection devices.* Incorporate new design techniques to increase efficiency of Cabinet Engineering.* Responsible for executing defect-free designs in a timely manner.* Demonstrated ability to work in a global team environment,* Understanding of the electrical engineering concepts deemed necessary for designing the electrical cabinet* Understanding of NEMA/IP classifications<br>Essential Requirements of the role (Experience / Skills / Competencies):-•Years of experience: 3+ years•Field of experience: 3+ years field / projects / maintenance experience (working with instrumentation, control systems) in energy and/or oil & gas environment or relevant field will be an added advantage.•Technical Skills: ? Refer attached Desired & Essential Functions (Responsibilities):•Soft Skills: Good written and spoken communication skills in English, with demonstrated capability to structure and write technical material.•Tools or Software (Required / Preferred): Proven experience with document layout, formatting, and editing.•Education Qualifications: Bachelors or Diploma in Instrumentation / Electronics / Electrical or equivalent and up to 5+yrs experience.•Industry Background or Experience (Required / Preferred): Knowledge of rotating machinery operation and controls systems.•Target Companies: ? Any•Off-limits Companies: ? Not clear .•Required Accreditations / Qualifications / Certification / Licenses including Driving License: Ability and willingness to travel for site survey •Self-starter with minimal supervision requirement; able to work independently; ability to prioritize, organize work and meet deadlines<br>Desirable attributes of the worker (Experience / Skills / Competencies):-* Strong preference for individuals experienced in design of Bently Nevada machinery protection cabinet and control products.* Knowledge of Cabinet design engineering,* Knowledge of Bently Nevada machinery protection and management systems products and services.* 3+ years field / projects / maintenance experience (working with instrumentation, control systems) in energy and/or oil & gas environment or relevant field will be an added advantage.* Understanding of ISO 9001 design control standards* Prior experience with utility protection and control design standards* Knowledge of LV control circuit, fuse and circuit breaker coordination* Prior experience following quality assurance processes while working in a projects schedule-driven environment<br>Interested candidates should send their CV along with the following details:Expected salary Visa/Work Permit status Notice Period Current Location

<h3><strong>About the Opportunity</strong></h3><p>Dar Al Riyadh Consultants is seeking a dedicated <strong>Civil/Structural Engineer</strong> to join their team in <strong>Riyadh, Saudi Arabia</strong>. This <strong>full-time</strong> role is crucial for ensuring the highest standards of civil construction activities through detailed inspections and compliance verification.</p><h3><strong>Role Overview</strong></h3><p>The successful candidate will be instrumental in upholding project integrity and safety by meticulously reviewing construction processes against approved plans, specifications, and industry benchmarks. This position requires a proactive approach to quality control and a commitment to regulatory adherence across all civil construction works.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Conduct detailed inspections of civil construction activities to ensure compliance with approved plans, specifications, and industry standards.</li><li>Verify that all work aligns with local regulations and project-specific requirements.</li><li>Implement and maintain robust quality control processes to ensure the integrity of civil construction works.</li><li>Identify and address any deviations from approved plans, initiating corrective actions as needed.</li><li>Create comprehensive inspection reports, meticulously documenting findings, deviations, and corrective measures.</li><li>Maintain accurate and organized records of all inspection activities and related documentation.</li><li>Collaborate effectively with construction teams, project managers, and other stakeholders to facilitate efficient inspections.</li><li>Provide expert guidance on meeting civil construction requirements throughout project execution.</li><li>Oversee testing and validation procedures for civil construction materials and elements.</li><li>Ensure that all construction materials meet specified standards and project requirements.</li><li>Monitor and enforce stringent safety standards on construction sites.</li><li>Identify and address safety hazards specifically related to civil construction activities.</li><li>Communicate inspection results clearly and professionally to clients, project teams, and relevant authorities.</li><li>Provide informed guidance on addressing any non-compliance issues.</li><li>Stay updated on industry best practices, codes, and emerging technologies in civil construction.</li><li>Recommend improvements to enhance the overall efficiency and quality of civil construction projects.</li></ul><h3><strong>Required Qualifications and Experience</strong></h3><ul><li>A minimum of <strong>15 years of experience</strong> in civil construction inspection or a related field.</li><li>Proven ability to conduct detailed inspections and ensure compliance with industry standards and regulations.</li></ul><h3><strong>Work Setting</strong></h3><p>This is a <strong>full-time position</strong> based in <strong>Riyadh, Saudi Arabia</strong>. The role involves significant on-site presence for inspections and close collaboration with various project stakeholders.</p><h3><strong>Application Process</strong></h3><p>Interested candidates are invited to apply, demonstrating their relevant experience and qualifications for this critical Civil/Structural Engineer role.</p>

<h3 >About Qualcomm and the Opportunity</h3> <p >Qualcomm is expanding its presence in Riyadh, Saudi Arabia, to bolster its infrastructure across the region. As Saudi Arabia progresses with its digital transformation under Vision 2030, Qualcomm is investing in advanced computing and data centre capabilities to support AI, cloud technologies, and scalable advanced connectivity. This presents an opportunity to contribute to a rapidly growing technology hub. We are seeking a <strong >Machine Learning Engineer Staff level</strong> for our Datacentre AI Engineering team in a full-time capacity in Riyadh.</p> <h3 >Role Overview</h3> <p >The Staff-level ML Applications Engineer will operate with a high degree of autonomy, defining technical goals and scope for assigned problem areas. This role involves leading development efforts from conception through execution, requiring extensive hands-on experience in C++/Python-based AI development within a Linux environment. The successful candidate will demonstrate strong analytical skills, foster effective cross-team collaboration, and mentor other engineers through practical example, maintaining a hands-on, execution-focused approach.</p> <h3 >Key Responsibilities</h3> <ul > <li >Improve and optimize key Deep Learning models on Qualcomm AI 100.</li> <li >Build deep learning framework extensions for Qualcomm AI 100 in upstream open-source repositories.</li> <li >Collaborate with internal teams to analyze and optimize training and inference for deep learning.</li> <li >Develop software tools and an ecosystem around the AI SW Stack.</li> <li >Work on Triton, ExecuTorch, Inductor, and TorchDynamo to build abstraction layers for inference accelerators.</li> <li >Optimize workloads for both scale-up (multi-SoC) and scale-out (multi-card) systems.</li> <li >Optimize the entire deep learning pipeline, including graph compiler integration.</li> <li >Apply knowledge of software engineering best practices.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >5-10 years of professional experience in a relevant engineering role, specifically in AI development.</li> <li >Extensive hands-on experience in C++/Python-based AI development within a Linux environment.</li> <li >Demonstrated ability to define technical goals, scope problem areas, and lead development efforts from conception through execution.</li> <li >Strong analytical skills and a proven ability to collaborate effectively across teams.</li> <li >Experience mentoring and guiding other engineers through practical example.</li> <li >Proficiency with Deep Learning models, frameworks, and optimization techniques.</li> <li >Familiarity with open-source contributions and building software ecosystems around AI stacks.</li> <li >Knowledge of inference accelerators and related technologies such as Triton, ExecuTorch, Inductor, and TorchDynamo.</li> <li >Understanding of workload optimization for multi-SoC and multi-card systems, and deep learning pipeline optimization including graph compiler integration.</li> <li >Adherence to software engineering best practices.</li> </ul> <h3 >Compensation Structure</h3> <p >The compensation package for this full-time position includes a competitive salary, housing and transport allowances, Stock (RSU's), and a performance-related bonus.</p> <h3 >Join Our Team</h3> <p >This role offers an opportunity to contribute to the advancement of AI and data centre capabilities within a global technology leader. We invite qualified candidates to apply.</p>

Job Summary Assists the Site Engineer / Construction Manager in leading activities, related to his discipline, in a defined zone Assists in planning, managing, and following up on the day-to-day execution of construction plans in a defined zone Reads the drawings, scope of work, and specifications related to his discipline carefully and in detail Ensures that all operations are being conducted as per the standard construction methods Monitors the man-power and equipment allocation as instructed by the Site Engineer/Construction Manager Ensures that all materials and tools related to his discipline are available on site, and reports to the Site Engineer/Construction Manager in case of any shortage or delay Assists the Site Engineer / Construction Manager in the preparation of daily progress reports related to his discipline Knowledge, Skills, and Experience Bachelor in Engineering Good interpersonal and communication skills with planning and organizational abilities

The LOTO Engineer is responsible for developing, implementing, and managing the Lockout/Tagout (LOTO) and Energy Isolation Program during construction completion, pre-commissioning, commissioning, testing, and plant handover activities. The role ensures personnel safety by preventing inadvertent energization, startup, release of stored energy, or operation of equipment during work execution. The LOTO Engineer shall coordinate all isolation activities between EPC Contractors, OEMs, Commissioning Teams, Construction, HSE, and future Operations personnel.<br><br>Key Responsibilities LOTO Program Development Review and maintain the project Lockout/Tagout (LOTO) Procedure in accordance with project requirements, international standards, and company HSE policies Establish isolation management processes for mechanical, electrical, instrumentation, hydraulic, pneumatic, chemical, and thermal energy sources Develop isolation boundaries and energy isolation philosophy for all plant systems Ensure compliance with OSHA, NFPA 70E, IEC, and project-specific safety requirements<br>Isolation Planning and Coordination Review commissioning schedules and identify isolation requirements for testing and energization activities Coordinate with Construction, Commissioning, System Completion, and EPC teams to plan safe equipment release and energization Participate in System Handover and Ready for Commissioning reviews Ensure isolations are properly planned before commencement of commissioning activities<br>Commissioning Support Support first energization activities for:Gas Turbine Generator systems Steam Turbine systems HRSG systems Electrical substations MV and LV distribution systems DCS and control systems Auxiliary systems Coordinate temporary and permanent isolations during commissioning and testing Ensure safe management of simultaneous operations (SIMOPS)<br>Documentation and Reporting Maintain LOTO registers and isolation logs Track active isolations and provide daily isolation status repots Maintain isolation drawings, single-line diagrams, and mark-ups Prepare weekly and monthly reports on isolation activities and compliance<br>Training and Awareness Deliver LOTO awareness and competency training to project personnel Conduct toolbox talks and safety briefings related to energy isolation Support contractor onboarding regarding project LOTO requirements<br>Audits and Compliance Conduct routine audits of active isolations Identify and close LOTO-related non-conformances Participate in incident investigations involving energy isolation Recommend improvements to strengthen isolation controls<br>Qualifications Education Bachelor’s degree in electrical engineering, Mechanical Engineering, Instrumentation Engineering, or equivalent Experience Minimum 10 years of experience in power generation Minimum 5 years of experience in commissioning, startup, operations, or energy isolation management Experience with Combined Cycle Power Plants is preferred. Experience in commissioning and startup of CCGT projects <br>Technical Knowledge Lockout/Tagout systems and procedures. Permit-to-Work systems. Electrical safety and switching operations. Mechanical isolation techniques. Commissioning and startup processes. System Completion and Turnover processes. SIMOPS management. Risk assessment and Job Safety Analysis.<br>Preferred Certifications OSHA 30-Hour Construction Safety. NFPA 70E Awareness. Authorized LOTO Coordinator Training. NEBOSH IGC (preferred). Electrical Safety Training.

A leading MEP Contracting Company in Riyadh, Saudi Arabia is looking for an experienced Mechanical Engineer to join our growing team.- Location: Riyadh, Saudi Arabia- Experience: 5–10 years in MEP/Construction projects<br>Key Responsibilities:Supervise and manage on-site mechanical works in accordance with project specifications and approved drawings. Coordinate with civil, electrical, and structural teams to ensure seamless integration of mechanical systems. Oversee the installation of HVAC, plumbing, fire protection, and other mechanical systems. Ensure all mechanical works comply with applicable codes, standards, and quality requirements. Monitor project progress and coordinate with contractors, subcontractors, and suppliers to ensure timely project delivery. Review mechanical drawings, specifications, and technical documents. Provide technical support and resolve on-site engineering issues efficiently. Prepare method statements, risk assessments, and support project planning activities. Enforce HSE regulations and company safety policies through regular inspections and audits. Attend site meetings and provide progress updates to the project management team. Maintain accurate project documentation, daily reports, progress reports, and material records. Requirements:✔ Bachelor's Degree in Mechanical Engineering.✔ 5–10 years of experience in MEP or construction contracting projects.✔ Strong experience in HVAC, Plumbing, Fire Fighting, and Mechanical Systems.✔ Excellent knowledge of site execution, testing & commissioning, quality control, and project coordination.✔ Ability to read and interpret mechanical drawings and technical specifications.✔ Strong communication, leadership, and problem-solving skills.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Support the Facility Management function by assisting in FM Design Review, city planning, and Operational Strategy Implementation initiatives.</p><p>The trainee will help coordinate related activities, prepare digital dashboards and track the implementation of the operations strategy. This role provides practical exposure to data analysis design, review support, reporting, and cross-department coordination within a large scale urban development environment.</p><p><strong>Job Responsibilities:</strong></p><ul><li>Assist in preparing digital dashboards and progress reports to track city operations strategy implementation and operational readiness activities.</li><li>Assist in project lifecycle activities including scope execution, and closeout.</li><li>Support the FM Design Review process by organizing design review comments, maintaining trackers, and coordinating with design and development teams.</li><li>Collect, organize, and analyze operational and project data from different teams to support reporting and decision-making.</li><li>Maintain action trackers, issue logs and progress monitoring tools related to operational readiness and strategy implementation.</li><li>Support coordination between FM and development teams to follow up on operational requirements.</li><li>Assist in preparing presentations, briefing notes and summary reports for internal meetings and management updates.</li><li>Support documentation and record keeping related to -M design inputs, operational planning, and strategy Implementation related activities.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in mechanical or electrical engineering or related discipline.</li><li>Basic knowledge in Data Analytics / Information Systems</li><li>Proficient in both Arabic and English (written and spoken).</li><li>No prior experience required.</li><li>Eligible for Tamheer Program.</li></ul><p></p></section>

We are looking for a Civil Technical Office Engineer – Wet Utilities to join our team in Jeddah. Key Responsibilities Prepare and review detailed shop drawings for gravity networks, including sewerage and stormwater systems. Prepare and review shop drawings for pressurized networks, including water supply, firefighting, and irrigation systems. Prepare detailed drawings for manholes, chambers, thrust blocks, puddle flanges, and connection details. Develop fully coordinated fabrication and shop drawings from design packages prior to client submission and site execution. Prepare Purchase Requisitions (PRs) and Material Submittals for pipes, fittings, valves, and other network components. Coordinate with vendors to obtain shop and fabrication drawings for specialized items. Prepare accurate Material Take-Offs (MTO) and verify BOQs based on approved drawings. Respond to RFIs and provide technical support to the site team regarding levels, slopes, alignment, and design clashes. Coordinate technically with clients, consultants, vendors, and site teams. Requirements Bachelor’s degree in Civil Engineering. Minimum 7 years of relevant experience in wet utilities, infrastructure, or technical office works. Strong knowledge of gravity and pressurized utility networks. Experience with sewerage, stormwater, water supply, firefighting, and irrigation networks. Strong knowledge of pipe materials, fittings, valves, and related utility components. Proficiency in Auto CAD and Civil 3D. Strong experience in shop drawings, MTO, material submittals, and technical coordination

<p class="isSelectedEnd">A contracting company is looking for <strong>recent engineering graduates</strong> to join its team:</p><p class="isSelectedEnd"> Civil Engineer<br> Architect<br> Mechanical Engineer</p><p><strong>Saudi nationality</strong> and recent graduation are required.</p>

We’re Hiring | Procurement Engineers Esnad Contracting Company is looking for 3 Procurement Engineers to join our team in Riyadh,<br>???? Civil Procurement Engineer ???? Electrical Procurement Engineer ???? MEP Procurement Engineer <br>Requirements:• Bachelor’s degree in Engineering or a related field• 1–7 years of relevant experience in procurement• Experience in construction and infrastructure projects• Good knowledge of materials, suppliers, RFQs, quotations, and purchase orders• Strong negotiation and communication skills• Saudi

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking an experienced Landscape Engineer to join our team, responsible for the design, planning, and execution of landscape projects from concept through construction and handover. The ideal candidate will have a strong technical background in landscape architecture, irrigation systems, and site supervision, combined with the ability to manage multiple projects and coordinate effectively with cross-functional teams.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Key Responsibilities</b></p><ul><li>Prepare landscape master plans, planting plans, hardscape layouts, and irrigation design drawings</li><li>Develop construction documents, technical specifications, and detailed drawings for landscape works</li><li>Prepare Bills of Quantities (BOQs), cost estimates, and material take-offs</li><li>Supervise landscape construction works on site, ensuring compliance with design intent, quality standards, and safety regulations</li><li>Coordinate with architects, civil engineers, MEP engineers, contractors, and clients throughout project phases</li><li>Review contractor submittals, shop drawings, and material samples for approval</li><li>Conduct site inspections and prepare progress reports, snag lists, and punch lists</li><li>Ensure compliance with local municipal codes, environmental regulations, and sustainability standards</li><li>Select appropriate plant species, soil types, and irrigation systems suited to local climate and site conditions</li><li>Manage project timelines, budgets, and resources to ensure timely delivery</li><li>Provide technical support and problem-solving during construction phases</li><li>Prepare as-built drawings and project closeout documentation</li></ul><p><b>Qualifications &amp; Requirements</b></p><ul><li>Bachelor's degree in Landscape Architecture, Landscape Engineering, Horticulture, or a related field</li><li>Minimum 5 years of relevant experience in landscape design and construction supervision</li><li>Proficiency in AutoCAD, SketchUp, Adobe Photoshop/Illustrator; GIS knowledge is a plus</li><li>Strong knowledge of irrigation systems, hardscape materials, and regional plant palettes</li><li>Experience with BOQ preparation, cost estimation, and technical specification writing</li><li>Familiarity with local building codes, landscape regulations, and sustainability practices</li><li>Proven experience in site supervision and quality control</li><li>Excellent verbal and written communication skills in English (Arabic is an advantage)</li><li>Strong organizational, coordination, and project management skills</li><li>PMP certification is a plus</li><li>Valid driver's license (site visits required)</li></ul><p><b>Skills</b></p><ul><li>Attention to detail and strong design sensibility</li><li>Problem-solving and decision-making under site constraints</li><li>Ability to manage multiple projects simultaneously</li><li>Team collaboration and client-facing communication</li></ul><p><br></p></div>

<p><b>Job Purpose:&nbsp;</b></p><p><br></p><p>To ensure the safe and efficient operation of biomedical equipment by performing maintenance, repairs, and providing training on its proper use, in compliance with national and international healthcare accreditation standards and applicable regulations.</p><p><b><br></b></p><p><b>Key Responsibilities and Duties:</b></p><ul><li>Assures the working conditions of Fakeeh Health Care facility medical equipment s in his / her domain of specialties and reports to Biomedical Engineering Unit Manager on any urgent stage related to Biomedical Equipment.</li><li>Works independently and/or collaboratively with other BME Department members according to the job requirement, to minimize the down time of the medical equipment in his domain of specialties.</li><li>Suggests to Biomedical Engineering Manager / Director the necessary tools, test equipment as well as service materials required for the medical equipment in his domain of specialties.</li><li>Performs and/or supervises corrective jobs for medical equipment whenever is needed and confirm completion of this task by signed service report from end-user and debrief action taken on the system</li><li>Performs and/or supervises scheduled PPM s per manufacturer checklist and confirm completion of this task by signed service report from end-user and debrief action taken on the system</li><li>Performs and/or supervises medical equipment installation and dismantling activities after getting necessary permits from the Medical Equipment Department Head this includes complete needed documentation for new acceptance &amp; scrap process.</li><li>Controls the work and follow-up the daily request to be distributed to Biomedical Technician and follow-up the action taken for each job order.</li><li>Assists Supply Chain Department in evaluating the medical equipment spare parts offers.</li><li>Assures the environmental and technical specifications fulfillment of the new and existing medical equipment in site.</li><li>Reports to the Biomedical Engineering Manager / Director in monthly basis including execution status of the PPM Plan for medical equipment.</li><li>Responds to urgent incidents and perform immediate actions in coordination with Biomedical Engineering Manager / Director.</li><li>Orders missing equipment / spare parts and product catalogues for medical equipment in his domain of specialties and assures keeping them organized.</li><li>Controlling the training needed for Fakeeh Health Care facility users and do the necessary training of needed.</li><li>Always Observes and supervises the Biomedical Workshop activities.</li><li>All Fakeeh Care employees are responsible for continuous improvement, including: Performing all duties and tasks in a manner that supports Fakeeh s Person-Centered care values. Actively contributing to continuous improvement initiatives, within the scope of the role. Adherence to safety protocols and proactively seeking to address any job-related safety concerns. Maintaining strict confidentiality of all sensitive information accessed or encountered during work. Complying with cybersecurity policies and standards to protect Fakeeh s systems and participating in awareness training and initiatives to prevent cyber threats. Adhering to and upholding Fakeeh Care s code of conduct, policies and ethical standards. Completion of mandatory education as per the requirement, at least one month prior to expiration.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum 5 years experience in service and maintenance activities of medical equipment in his domain of specialty in either hospital or medical equipment services provider company.</li><li>Bachelor degree of Electronics or Biomedical Engineering.</li><li>Excellent command of oral and written English and prefer Arabic.</li><li>Hold a valid license to practice as a Biomedical Engineer issued by the relevant regulatory authority.</li></ul>

<h3 >About the Role</h3> <p >Napco National is seeking a <strong >Process Improvement Engineer</strong> to join their team in Dammam, Eastern Region. This full-time role is suitable for candidates with 0-1 years of experience, focusing on enhancing operational efficiency and supporting strategic decision-making within the company.</p> <h3 >Key Responsibilities</h3> <ul > <li >Interpret and apply internal policies and procedures, leveraging an understanding of Napco National's business environment and objectives.</li> <li >Communicate information clearly and concisely, both verbally and in writing, within a business context.</li> <li >Monitor, collect, and interpret raw data from various sources, evaluating results to create reports that support decision-making processes.</li> <li >Organize and plan work and project activities to efficiently accomplish tasks and meet objectives.</li> <li >Gather and analyze data to effectively respond to complex or problematic situations, developing solutions that add value for the company and its customers.</li> <li >Serve as a lead auditor, providing guidance, assistance, and evaluation to internal auditors.</li> </ul> <h3 >Required Competencies</h3> <ul > <li >Ability to understand and apply business policies and procedures.</li> <li >Strong communication skills for delivering information in a professional setting.</li> <li >Proficiency in data collection, interpretation, and analysis for report generation.</li> <li >Fluency in both spoken and written national and foreign languages.</li> <li >Organizational and planning skills to manage work activities effectively.</li> <li >Competence in using standard office equipment, automation systems, and software.</li> <li >Problem-solving skills to address new or complex situations and develop innovative solutions.</li> </ul> <h3 >Experience and Work Type</h3> <p >This position requires <strong >0-1 years of experience</strong>, making it suitable for recent graduates or individuals early in their careers. It is a <strong >full-time</strong> role within Napco National.</p> <h3 >Location</h3> <p >The role is based in <strong >Dammam</strong>, located in the Eastern Region.</p> <h3 >Application Process</h3> <p >Candidates who meet the outlined requirements are encouraged to apply for this Process Improvement Engineer position at Napco National.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>Job Title: </strong>Engineer, Production</span></p><br> <br> <p><span><strong>Reporting to: </strong>Mine Manager</span></p><br> <br> <p><span><strong>Business Unit / Function: </strong>GGM</span></p><br> <p><span><strong>Why This Role Matters</strong></span></p><br> <br> <p><span>The Engineer, Production plans and coordinates the availability and use of people, supplies, and equipment to support efficient mine operations in line with statutory, safety, and environmental conditions.</span></p><br> <br> <p><span><strong>What You Will Deliver</strong></span></p><br> <br> <p><span><strong>Resource and Extraction Planning</strong></span></p><br> <br> <ul> <li><span>Test the validity of minable resources through preliminary surveys with geologists and determine the feasibility of ore extraction.</span></li> </ul> <br> <ul> <li><span>Determine suitable ore extraction methods considering overburden depth, altitude, deposit characteristics, and surrounding strata.</span></li> </ul> <br> <ul> <li><span>Plan and coordinate the use of labor, supplies, and equipment in line with efficiency, statutory, safety, and environmental conditions.</span></li> </ul> <br> <p><span><strong>Engineering and Commercial Analysis</strong></span></p><br> <br> <ul> <li><span>Consult with geologists, metallurgists, and engineers on mining machines, facilities, systems, infrastructure, and environmental protection or restoration.</span></li> </ul> <br> <ul> <li><span>Prepare operating and project estimates, assess capital and operating viability, control expenditure during production, and participate in negotiations for mine purchases or investments.</span></li> </ul> <br> <ul> <li><span>Analyze environmental sensitivities related to processes, waste, chemicals, environmental and cultural factors, and geopolitical considerations.</span></li> </ul> <br> <p><span><strong>Reporting and HSE</strong></span></p><br> <br> <ul> <li><span>Analyze and compile monthly and yearly statistical production reports for management review and information.</span></li> </ul> <br> <ul> <li><span>Monitor adherence to Maaden Health, Safety and Environment programs, policies, and procedures, and provide guidance to address unsafe or damaging work practices.</span></li> </ul> <br> <ul> <li><span>Investigate incidents in the assigned work area, provide recommendations or responses, and brief contractors on applicable HSE regulations.</span></li> </ul> <br> <br> <p><span><strong>Minimum Qualifications</strong></span></p><br> <br> <ul> <li><span>Bachelor’s degree in mining engineering.</span></li> </ul> <br> <p><span><strong>Experience</strong></span></p><br> <br> <ul> <li><span>5 years of experience in mining engineering, including mine operations experience in differing mine styles.</span></li> </ul> <br> <p><span><strong>Skills That Matter</strong></span></p><br> <br> <ul> <li><span>Good knowledge of English.</span></li> </ul> <br> <ul> <li><span>Achievement orientation.</span></li> </ul> <br> <ul> <li><span>Teamwork.</span></li> </ul> <br> <ul> <li><span>Ethics and values.</span></li> </ul> <br> <br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

We are hiring Planning Engineer on behalf of a leading technology solutions company specializing in ELV (Extra Low Voltage) and AV (Audio Visual) systems based in Riyadh - KSA, delivering integrated technology solutions across the Middle East. With expertise in system design, supply, installation, and integration, the company serves a diverse range of commercial and specialized projects, with a strong focus on quality, innovation, and customer satisfaction.<br>Duties and Responsibilities: Planer Preparing base line plan (primavera) for ongoing projects and make sure it gets approved by contractor/ client at beginning of projects. Update project plan periodically as per contract terms and condition. Update on monthly basis from engineers and update project plans. Raise any delay events may accrue on project and raise the same to project manager. Assist in preparing claim for delay events as per contract terms and condition and raise to contractor / client. Support the planning team in maintaining accurate project documentation and progress reports Implement Company quality system. Train staff on selected topics. Qualifications Bachelor’s Degree in Civil Engineering, Electrical Engineering, Mechanical Engineering, Construction Management, or related field. Diploma holders with strong experience in planning can also be considered. Professional certification in Primavera P6 (PMP or Planning certification is an advantage). Strong knowledge of project management principles and construction methodologies. Experience3–7 years of experience as a Project Planner / Planning Engineer in construction, MEP, ELV, infrastructure, or EPC projects. Experience in developing baseline schedules, updated programs, and recovery schedules. Hands-on experience in project planning, monitoring, and progress reporting. Experience in preparing look-ahead schedules (weekly and monthly). Experience in tracking project milestones, deliverables, and critical path activities. Experience in coordinating with project managers, site engineers, procurement, and subcontractors. Experience in preparing delay analysis and EOT (Extension of Time) claims. Experience in project reporting to clients and senior management. Skills Primavera P6 (mandatory) Microsoft Project (MSP) Advanced Microsoft Excel (dashboards, pivot tables, reporting) Project scheduling & resource planning Critical Path Method (CPM)

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li> <p>Senior E2E &amp; UAT Test Engineer responsible for defining and governing end-to-end test coverage across complex business journeys and integrated systems, with primary focus on UAT and Pre-Production environments.</p> <p>The role will:</p> <ul> <li>Define E2E coverage and supervise test execution across business-critical journeys.</li> <li>Design and prepare E2E test scenarios, test cases, and required test data.</li> <li>Validate E2E defects for quality, reproducibility, evidence, and business impact.</li> <li>Maintain the UAT Journey Matrix covering test scope, integrations, environments, sprint deliveries, dependencies, and execution status.</li> <li>Track readiness and availability of external and dependent integrations.</li> <li>Perform UAT environment sanity checks, validation, and stabilization activities.</li> <li>Coordinate UAT execution, issue resolution, and customer-facing validation.</li> <li>Work closely with business, development, integration, and testing teams to ensure E2E readiness and successful UAT completion.</li> <li>Report functionally to the Test TPL for UAT and coverage governance and coordinate operationally with the Test Lead for planning and integration activities.</li> </ul> </li> </ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 4+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>