Electromechanical Engineer Jobs

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Adjust pressure, temperature, flow rates, and purity parameters to support the production of oxygen and nitrogen. Record day-to-day operating parameters of ASP equipment and LPG storage and handling equipment and check any defects or failures during the shift and notify the Shift In-Charge.&nbsp;<br><strong>KEY ACCOUNTABILITIES:</strong><br>• Record daily checks and note parameters of Air Separation Plant equipment including centrifugal air compressors, oxygen compressors, chilled water equipment, Liquid Oxygen turbine, cold box, Liquid Oxygen pump, Liquid Nitrogen pump, and storage facilities and check safety requirements for air separation plants.&nbsp;<br>• Handle preventive maintenance with Mechanical Technicians as per servicing plans and check jobs during planned down days and corrective maintenance activities under safety norms.&nbsp;<br>• Handle tasks and duties assigned by the superior.&nbsp;<br>• Carry out shift activities in Water Treatment Plant (WTP) including sand filter backwash and water blowdown.&nbsp;<br>• Support Root Cause Analysis (RCA) investigations by providing accurate failure observations, field-level feedback, and execution insights, contributing practical knowledge of equipment behavior and maintenance conditions. Apply approved preventive actions and updated maintenance tasks resulting from RCA outcomes.&nbsp;<br>• Perform inspection, preservation, and functional testing of critical spare parts stored in the warehouse, in accordance with defined procedures, checklists, and schedules, ensuring spares remain reliable, protected, and ready for installation when needed.<br>• Accurately record maintenance execution data in SAP, including work performed, failure symptoms, parts replaced, and observations, ensuring factual, complete, and timely information to support equipment history, analysis, and maintenance plan improvement.<br>• Handle operation and process tasks of the Air Separation Plant.&nbsp;<br>• Adjust oxygen and nitrogen parameters as required by the Electric Arc Furnace (EAF) and Ladle Furnace (LF) processes and check Air Separation Plant (ASP) process conditions.&nbsp;<br>• Check technical and safety parameters of Liquified Petroleum Gas (LPG) storage facilities and of Liquified Petroleum Gas (LPG) &nbsp;handling equipment including LPG compressors, storage tanks, hot water boilers, of Liquified Petroleum Gas (LPG) &nbsp;pumps, evaporators, and pressure-reducing stations. • Handle Air Separation Plant (ASP), Water Treatment Plant (WTP), compressed air plant, and LPG storage system operation<br>• Assist coordination with EAF, LF, and caster teams to manage demand.&nbsp;<br>• Assist coordination with other departments and check team requirements.&nbsp;<br>• Carry out daily shift activities and check operation and maintenance problems.<br>• Check system leaks, compressors, and storage tanks.&nbsp;<br>• Handle emergency power failure activities in WTP, CAP, ASP, and LPG storage systems.<br>• Record oxygen purity, output, and alarms.&nbsp;<br>• Check and record instructions from Management.&nbsp;<br>• Record field readings of ASP, WTP, CAP, and LPG storage system as per log sheet and notify any abnormality.<br>• Handle safety steps during unloading of LPG from mobile tankers to storage tanks.&nbsp;<br>• Clean equipment, tools, and work areas by removing combustible materials and handle cleaning after maintenance jobs.&nbsp;<br>• Handle safe shutdown and startup of the oxygen plant.&nbsp;<br>• Handle liquid oxygen and nitrogen safely during tanker unloading.&nbsp;<br>• Handle safe unloading of LPG tankers in storage tanks.&nbsp;<br>• Check compliance with safety directives issued by Management. &nbsp; &nbsp;<br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p>Parsons is looking for an experienced Lead Rolling Stock professional to join our team. The Lead Rolling Stock will lead the team in effectively delivering technical services for the installation, testing, and commissioning of rolling stock and depot equipment systems. This role ensures that project requirements are met within budget and in line with key performance indicators, while providing safe and fit-for-purpose vehicles and infrastructure.</p><p>Reporting to the Systems Manager, the Lead Rolling Stock will be responsible for developing and reviewing engineering, quality, and operational standards, as well as specifications, procedures, and instructions for electronic rolling stock systems and related equipment. These will be designed to ensure fitness for purpose and to support the safe, reliable, and cost-effective management of all assets.</p><h2>What You'll Be Doing:</h2><ul><li>Oversee all rail systems, rail infrastructure and rolling stock testing &amp; commissioning activities and monitor sub-contractors' testing, commissioning and handover work</li><li>Review and comment on all testing &amp; commissioning programs, procedures, reports, etc. in due consideration of operation and maintenance requirements</li><li>Monitor all testing activities (Type Testing, Performance Testing, Routine Testing, Dynamic Testing and Final Testing) and identify issues and opportunities for improvements</li><li>Ensure accuracy of the work produced by the designers, design &amp; build contractors, etc. in terms of system integration, test and commissioning</li><li>Review system integration management activities so that the system can be properly integrated in terms of equipment, data, etc.</li><li>Coordinate and monitor rolling stock related interfaces and integration with other disciplines (Platform Screen Doors, Signaling, SCADA and Power Supply).</li><li>Monitor (maintainer manages the process) and ensure the implementation of the preventive and corrective maintenance of the rolling stock and related features.</li><li>Liaise with other disciplines and contractors to ensure proper integration and configuration of the system for all aspects of the project;</li><li>Liaise with System Interface Managers of the contractors to plan and schedule integration tests and documentation and submission of result reports; and</li><li>Identify, initiate, and implement corrective actions and process improvement methodologies in line with cost reduction and lean organization.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>University degree in Electrical, Mechanical, or Industrial Engineering (Bachelor of Sciences minimum) or Business engineering (Bachelor of Sciences or equivalent minimum).</li><li>Minimum of 15 years experience in metro system testing and commissioning with solid understanding of Systems Engineering Life Cycle.</li><li>Knowledge of fundamental of rail engineering disciplines and systems.</li><li>Possess strong commitment to the organization mission and is highly motivated to combine energy and expertise with other colleagues to achieve a common objective.</li><li>Ability to deploy available processes, tools and time management methodologies that increase efficiency and productivity to fulfil objectives.</li><li>Exceptional communication skills, fluent in report writing and group facilitation; presentation skills, and fluency in English spoken and written.</li><li>Knowledge of Arabic language preferred.</li><li>Analytical thinking, problem solving, business innovation, and customer service orientation.</li><li>GCC Experience</li></ul>

<p>Account Executive PT Nalco , an Ecolab Company, has an immediate need for an Account Executive - PT - in our Purolite group. If you are a passionate sales professional with a proven track record of success in technical sales we invite you to apply. This is your opportunity to join a large growing company offering a competitive base salary, bonus structure and benefits. You will be primarily responsible for revenue and profit growth of Nalco. You will be required to take a consultative sales approach with a primary emphasis on strong account leadership skills and retention of strategic Nalco accounts. In addition, you must build long-term relationships with a large customer base by understanding their key business drivers, executing system assurance programs, and selling new technologies.</p><p>What s in It For You:</p><ul><li>Flexible, independent work environment where you will manage a monthly schedule</li><li>Access to best in class resources, tools, and technology</li><li>Grow your income as you drive growth</li><li>Thrive in a company that values a culture of safety to include top-notch safety training and personal protection equipment</li></ul><p>What You Will Do:</p><ul><li>Contacting &amp; Visiting Customers and Prospects for at least 75% of his working time to at least achieve the agreed budgeted targets.</li><li>Control the expenses in accordance with the budget.</li><li>Complete, with all necessary information, orders prior to processing.</li><li>Propose marketing strategies to promote the Purolite brand and the development of the sales of Purolite ion exchange resins to Customers &amp; Prospects.</li><li>Provide technical support in the marketplace to convince contacts to become regular customers:</li><ul><li>Calculation of projects and / or plant optimization</li><li>On-site intervention and audit on industrial sites for the optimal use of resins and the settlement of any operating difficulty.</li></ul><li>Participate in technical seminars for water treatment.</li><li>Propose the best solutions to commercial and technical problems encountered by helping before and after sales.</li><li>Improve market intelligence regarding the competition in terms of people, strategies, pricing, share per segment</li></ul><p>Position Details:</p><ul><li>Area of operation: Water and Non-Water* sectors in Saudi and the Gulf. (End users, OEM (S)**, Main Contractors and Service Companies and specialized Traders)</li><li>Main mission: To develop sales of Purolite ion exchange resins in the areas mentioned above.</li><li>Reporting to: Regional Manager Purolite Middle East</li></ul><p>*Non-Water Sector: covers Chemistry, Petrochemicals, Hydrometallurgy, Mining, Food, Pharmaceutical (OEM means Original Equipment Manufacturer)</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Engineering (Chemical, Mechanical, Industrial), or Life Sciences (Biology, Chemistry, etc.)</li><li>1+years of successful technical sales or field sales support experience</li><li>1+ years of experience directly related to well service stimulation business preferred</li><li>Water treatment or specialty chemical industry experience</li><li>Working knowledge of boilers, cooling towers, and wastewater treatment systems</li><li>High computer application literacy (including Microsoft Office Suite, and ability to learn internal business systems)</li><li>History of working in a field that required autonomy and self-motivation</li><li>Prior experience that required excellent communication skills</li><li>Prior experience that required excellent organizational skills</li><li>Account leadership experience that includes calling on multilevel plant or facilities management to accomplish company goals</li><li>Prior experience that demonstrates a strong work ethic and ability to multitask</li></ul>

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About the Role</h3> <p style="margin:0 0 12px; ************;">Amazon is seeking a <strong style="font-weight:700;">Sr Regional Pre construction GES</strong> to join its team in Riyadh, Saudi Arabia. This full-time role involves leading the delivery of pre-construction (engineering design) phases for significant Customer Fulfillment (FC), delivery station (AMZL), sort center (SC), and quick commerce projects and conversions across AMET countries. The position manages an annual investment portfolio exceeding USD 1 billion, driving projects from site selection through construction readiness to meet Plan of Record requirements for timeline, quality, and financial targets.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Lead pre-construction activities including site selection, site evaluation, budget estimation, concept design, schematic design, and detail design for complex projects.</li> <li style="margin:0 0 6px;">Partner with Design &amp; Construction stakeholders and Real Estate teams to develop construction and site strategies that achieve optimal quality and business outcomes.</li> <li style="margin:0 0 6px;">Identify process improvements, analyze design conflicts, evaluate resources, and predict and mitigate risks throughout the pre-construction phase.</li> <li style="margin:0 0 6px;">Assess complex situations requiring leadership visibility and involvement, applying sound judgment to navigate decisions and determine appropriate escalation paths.</li> <li style="margin:0 0 6px;">Lead and drive cross-functional teams to deliver results and execute project deliverables independently, participating in and leading continuous improvement initiatives.</li> <li style="margin:0 0 6px;">Apply analytical skills to navigate local regulations and customer requirements, challenging current practices and developing innovative solutions.</li> <li style="margin:0 0 6px;">Create and own written communications to business partners and stakeholders on pre-construction matters, building collaborative and influential relationships.</li> <li style="margin:0 0 6px;">Troubleshoot issues independently and drive them to closure with minimal supervision, navigating internal and external barriers while managing multicultural teams.</li> <li style="margin:0 0 6px;">Travel up to 50% across the AMET region to support site evaluations and provide construction oversight during critical project phases.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Project Scope and Strategic Impact</h3> <p style="margin:0 0 12px; ************;">This role is responsible for projects ranging from 6,000 to 1,000,000 square feet. It involves building a robust 3+ year pipeline to anticipate future capacity needs and reduces business risk by analyzing and developing projects that define the next generation of high-performing fulfillment centers across AMET. Working at the intersection of real estate, design, and construction, the Sr Regional Pre construction GES evaluates opportunities, influences strategic decisions, and establishes the foundation for successful project execution. The position offers significant impact on AMET's infrastructure growth and contributes to developing future leaders by identifying and coaching talent within the team.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Required Qualifications</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Experience in construction or engineering project management, real estate development, or architecture/design.</li> <li style="margin:0 0 6px;">Bachelor's degree or above in Civil Engineering, Mechanical Engineering, Electrical Engineering, Construction Management, or an equivalent engineering science.</li> <li style="margin:0 0 6px;">15+ years of experience in construction management, pre-construction management, or related disciplines with progressive leadership responsibility.</li> <li style="margin:0 0 6px;">10+ years leading development and pre-construction activities for logistics facilities, warehouses, industrial facilities, and/or critical infrastructure projects.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Preferred Qualifications</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Master's degree in Engineering or a related field.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Disability Inclusion</h3> <p style="margin:0 0 12px; ************;">Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit <em style="font-style:italic;">https://**********************************************</em> for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Technical Manager is responsible for leading and managing all technical and engineering activities throughout the construction project lifecycle. The role ensures that engineering deliverables, designs, technical submissions, and construction activities comply with project specifications, approved drawings, applicable codes and standards, and the required quality and safety requirements.</p><p>Key Responsibilities</p><ul><li>Lead and manage the technical and engineering team throughout the project.</li><li>Review and coordinate engineering drawings, specifications, calculations, and technical documents.</li><li>Ensure all technical activities comply with approved project requirements, applicable codes, standards, and regulations.</li><li>Coordinate with consultants, clients, subcontractors, and internal departments on technical matters.</li><li>Review and approve technical submittals, method statements, material submissions, and shop drawings.</li><li>Monitor the progress of engineering deliverables and ensure timely submission and approval.</li><li>Identify and resolve technical issues, design conflicts, and construction-related challenges.</li><li>Coordinate with construction teams to ensure proper implementation of approved designs and engineering requirements.</li><li>Manage the RFI process and ensure technical queries are addressed and closed within the required timeframe.</li><li>Review design changes, variations, and technical proposals and assess their impact on cost, schedule, and constructability.</li><li>Ensure proper coordination between different engineering disciplines and eliminate design/interface conflicts.</li><li>Participate in technical meetings with the client, consultant, and project stakeholders.</li><li>Provide technical guidance and support to project and construction teams.</li><li>Monitor technical risks and develop appropriate mitigation measures.</li><li>Ensure that all engineering documentation and technical records are properly maintained.</li><li>Support project planning, cost control, procurement, and construction activities from a technical perspective.</li><li>Review subcontractor and supplier technical documents and ensure compliance with project requirements.</li><li>Contribute to project progress reports and provide updates on technical activities and outstanding issues.</li><li>Ensure compliance with company policies, HSE requirements, quality standards, and project procedures.</li><li>Lead technical problem-solving and support continuous improvement throughout the project.</li></ul><p>Qualifications</p><ul><li>Bachelor’s degree in <b>Civil Engineering, Architectural Engineering, Mechanical Engineering, Electrical Engineering</b>, or a related engineering discipline.</li><li>Relevant professional certifications or engineering registration are preferred.</li><li>PMP, professional engineering certification, or relevant technical certifications would be an advantage.</li></ul><p>Experience</p><ul><li><b>10+ years of relevant experience</b> in the construction industry, preferably with experience in large-scale construction or EPC projects.</li><li>Minimum <b>5 years in a technical/engineering management role</b>.</li><li>Proven experience managing multidisciplinary engineering teams.</li><li>Experience working with consultants, clients, subcontractors, and project stakeholders.</li><li>Strong experience in technical coordination, design review, construction documentation, and resolving engineering issues.</li><li>Experience with major construction projects is highly preferred.</li></ul><p>Key Performance Indicators (KPIs)</p><ul><li>Timely completion and approval of technical deliverables.</li><li>Reduction and timely closure of RFIs and technical issues.</li><li>Compliance with project specifications and approved designs.</li><li>Effective coordination between engineering disciplines and construction teams.</li><li>Timely resolution of design and construction interfaces.</li><li>Compliance with project quality, safety, cost, and schedule requirements.</li><li>Effective management and development of the technical team.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Strong technical and engineering management skills.</li><li>Excellent knowledge of construction methods, engineering standards, and project specifications.</li><li>Strong leadership and team management capabilities.</li><li>Excellent problem-solving and decision-making skills.</li><li>Strong communication and stakeholder management skills.</li><li>Ability to manage multiple priorities and work under pressure.</li><li>Strong knowledge of project management principles and construction processes.</li><li>Proficiency in MS Office and relevant engineering/project management software.</li><li>Strong analytical and organizational skills.</li><li>Ability to review and interpret engineering drawings, specifications, and technical documents.</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Project QA/QC Manager is responsible for establishing, implementing, and managing the project's Quality Assurance and Quality Control systems to ensure that all construction activities, materials, and deliverables comply with approved drawings, project specifications, applicable codes and standards, contractual requirements, and company quality procedures.</p><p><br></p><p><b>Key Responsibilities</b></p><ul><li>Lead and manage the project QA/QC team and oversee all quality activities throughout the construction lifecycle.</li><li>Develop, implement, and maintain the Project Quality Plan (PQP) in accordance with project and contractual requirements.</li><li>Ensure construction activities are performed in accordance with approved drawings, specifications, method statements, ITPs, and applicable standards.</li><li>Review and approve Inspection and Test Plans (ITPs), method statements, checklists, and quality procedures.</li><li>Monitor and inspect construction activities to ensure compliance with approved requirements.</li><li>Coordinate with the client, consultant, subcontractors, and project team on all QA/QC matters.</li><li>Ensure all required inspections and tests are conducted and properly documented.</li><li>Manage and monitor <b>Non-Conformance Reports (NCRs)</b> and ensure timely corrective and preventive actions.</li><li>Review and follow up on technical and quality-related submittals, material approvals, and inspection requests.</li><li>Conduct regular quality audits and inspections of construction activities and subcontractor performance.</li><li>Ensure proper implementation of quality control procedures by subcontractors and suppliers.</li><li>Monitor the quality of incoming materials and ensure compliance with approved material specifications.</li><li>Maintain and review quality records, inspection reports, test results, and project quality documentation.</li><li>Identify potential quality risks and implement appropriate preventive measures.</li><li>Participate in project meetings and provide regular updates on quality performance and outstanding issues.</li><li>Coordinate with engineering and construction teams to resolve quality and technical issues.</li><li>Ensure the timely closure of NCRs, observations, punch lists, and other quality-related actions.</li><li>Support internal, client, consultant, and third-party quality audits.</li><li>Ensure compliance with applicable <b>ISO 9001</b> requirements and project-specific quality standards.</li><li>Prepare and submit periodic QA/QC reports and quality performance indicators to project management.</li><li>Lead the preparation of project handover and final quality documentation.</li><li>Promote a strong quality culture across the project and ensure continuous improvement.</li></ul><p><br></p><p><b>Qualifications</b></p><ul><li>Bachelor’s degree in <b>Civil Engineering, Mechanical Engineering, Electrical Engineering</b>, or a related engineering discipline.</li><li>Relevant professional QA/QC certifications are preferred.</li><li><b>ISO 9001 Lead Auditor / Internal Auditor certification</b> is preferred.</li><li>Additional certifications such as <b>PMP, CQI/IRCA, ASQ, or equivalent</b> would be an advantage.</li></ul><p><br></p><p><b>Experience</b></p><ul><li><b>10+ years of experience</b> in QA/QC within the construction industry.</li><li>Minimum <b>5 years of experience in a QA/QC Manager or similar senior management position</b>.</li><li>Strong experience in large-scale construction, EPC, industrial, infrastructure, or building projects.</li><li>Proven experience managing multidisciplinary QA/QC teams.</li><li>Experience working with clients, consultants, subcontractors, and third-party inspection agencies.</li><li>Strong knowledge of construction quality standards, inspection procedures, ITPs, NCR management, and project quality documentation.</li><li>Experience in <b>Saudi Arabia/GCC projects</b> is highly preferred.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Strong leadership and team management skills.</li><li>Excellent knowledge of construction QA/QC procedures and standards.</li><li>Strong understanding of drawings, specifications, method statements, and ITPs.</li><li>Excellent problem-solving and analytical skills.</li><li>Strong communication and stakeholder management skills.</li><li>Ability to manage multiple priorities and work under pressure.</li><li>Strong knowledge of <b>ISO 9001</b> and quality management systems.</li><li>Good knowledge of applicable international and project-specific construction standards.</li><li>Proficiency in MS Office and relevant quality management/document control systems.</li></ul></div>

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About the Role</h3> <p style="margin:0 0 12px; ************;">SEVEN (Saudi Entertainment Ventures) is seeking a <strong style="font-weight:700;">Senior Technician – Maintenance</strong> to join its team. This full-time role involves performing advanced-level planned maintenance, repair activities, and troubleshooting for attraction rides and devices of all types. The Senior Technician will lead work execution alongside other attraction technicians within the complex, contributing to the operational readiness of entertainment venues across various cities including Riyadh, Tabuk, Abha, Yanbu, and Medina.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Role Purpose and Context</h3> <p style="margin:0 0 12px; ************;">The primary purpose of this role is to execute SEVEN’s maintenance requirements, processes, and technical pre- and post-opening requirements. This includes providing active support during the installation phase on-site, collaborating closely with contractors and manufacturers. The Senior Technician ensures that all maintenance activities adhere to international safety best practices and KSA regulatory requirements, maintaining high standards of safety and operational efficiency for all attractions.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Lead and execute technical activities for rides and attractions, supported by the technician team and technical management.</li> <li style="margin:0 0 6px;">Perform and document planned preventive maintenance activities according to approved schedules and SEVEN’s technical maintenance requirements.</li> <li style="margin:0 0 6px;">Execute and record corrective maintenance activities on rides and attractions in accordance with industry standards and manufacturer requirements.</li> <li style="margin:0 0 6px;">Respond to ride and attraction breakdowns, diagnose faults, and restore operations safely and efficiently.</li> <li style="margin:0 0 6px;">Verify the quality and accuracy of technicians' work, particularly on safety-critical inspections and repairs.</li> <li style="margin:0 0 6px;">Support daily ride operational readiness and contribute to achieving reliability and availability targets.</li> <li style="margin:0 0 6px;">Actively participate with Operations, Project Attraction Teams, and Project Management Consultants, maintaining close communication with ride manufacturers' representatives.</li> <li style="margin:0 0 6px;">Contribute to the continuous improvement of technical documentation, including SOPs, technical manuals, troubleshooting guides, and PM checklists.</li> <li style="margin:0 0 6px;">Monitor spare parts and consumable stock requirements, providing proactive feedback to ensure availability.</li> <li style="margin:0 0 6px;">Lead and execute major annual maintenance and rehabilitation activities to ensure optimal ride performance.</li> <li style="margin:0 0 6px;">Support annual certification and recertification processes conducted by Independent Bodies (IB).</li> <li style="margin:0 0 6px;">Deliver training and maintain training records in line with Learning &amp; Development requirements.</li> <li style="margin:0 0 6px;">Adhere to all QHSE policies, procedures, and company standards, ensuring a clean, safe, and organized work environment.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Qualifications and Experience</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">A minimum of <strong style="font-weight:700;">5 to 10 years</strong> of experience in maintenance, repair, and troubleshooting of attraction rides and devices.</li> <li style="margin:0 0 6px;">Demonstrated ability to lead technical activities and guide a team of technicians.</li> <li style="margin:0 0 6px;">Proficiency in diagnosing faults and implementing effective solutions for complex mechanical and electrical systems.</li> <li style="margin:0 0 6px;">Strong understanding of international safety best practices and KSA regulatory requirements related to entertainment attractions.</li> <li style="margin:0 0 6px;">Experience with asset management systems and related documentation is preferred.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Work Environment and Collaboration</h3> <p style="margin:0 0 12px; ************;">This role operates within a dynamic environment, requiring close collaboration with Operations teams, Project Attraction Teams, and external contractors and manufacturers. The Senior Technician will work across various SEVEN project sites in Riyadh, Tabuk, Abha, Yanbu, and Medina, ensuring consistent application of maintenance standards and procedures. The position demands a commitment to promoting guest experience excellence while upholding the highest safety standards.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Commitment to Standards</h3> <p style="margin:0 0 12px; ************;">The Senior Technician is expected to support SEVEN’s vision, mission, and values, contributing to organizational objectives. Adherence to the SEVEN Code of Conduct and maintaining the highest standards of integrity are fundamental to this role. This position also involves performing additional duties and responsibilities as assigned by Attraction Management.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong><span><span>Senior Engineering Manager (Infant Nutrition) | Al Kharj, Riyadh, Saudi Arabia</span></span></strong></p><br><br> <br> <p><strong><span>The Company&nbsp;</span></strong></p><br><br> <br> <p><span>Founded in 1977, Almarai Company is the world’s largest vertically integrated dairy company and the largest food and beverage manufacturing and distribution company in MENA. Headquartered in Riyadh, Almarai Company is ranked as the number one FMCG Brand in the MENA region and the market leader in all its categories across GCC, Egypt, and Jordan.</span></p><br><br> <br> <p><span>Over five decades of sustainable growth, Almarai has consistently provided nutritious and healthy products to consumers of all ages, driven by its core principle: “Quality you can trust.”</span></p><br><br> <br> <p><span>Almarai has expanded its product range to include, in addition to dairy products, juices and beverages, baked goods, poultry, infant formula, dates, fish and seafood, and bottled water, under more than 20 brands such as Almarai, L’usine, 7DAYS, ALYOUM, Nuralac, Farm’s Select, Ice Leaf, Almira, Seama, Oska, IVAL, Almarai Pro, Premier Chef, Bakemart, and others. </span></p><br><br> <br> <p><span>Almarai currently employs over 46,000 Quality Makers, across the GCC, Egypt &amp; Jordan. &nbsp;&nbsp;In 2025, Almarai reported net income of SAR 2.4 billion on sales of SAR 22 billion.</span></p><br><br> <br> <p><span>An aggressive expansion program together with acquisitions in new vertical markets have created an exciting opportunity to join a dynamic multinational team dedicated to furthering growth plans for the group.</span></p><br><br> <br> <p><strong><span>The Opportunity</span></strong></p><br><br> <br> <p><span>Almarai is seeking a highly experienced Senior Engineering Manager to lead the engineering and maintenance function within our Infant Nutrition manufacturing facility. The successful candidate will be responsible for ensuring optimal plant reliability, operational efficiency, safety compliance, asset performance, and continuous improvement across a highly automated manufacturing environment.</span></p><br><br> <br> <p><span>This role will provide strategic leadership for preventative maintenance, engineering projects, CAPEX planning, budget control, and the development of engineering teams to support world-class infant nutrition production standards. The position requires extensive experience in spray drying technology, packaging systems, and infant formula manufacturing processes while maintaining compliance with quality, food safety, and regulatory requirements.</span></p><br><br> <br> <p><strong><span>Requirements:</span></strong></p><br><br> <br> <ul> <li><span>Bachelor's Degree in Mechanical Engineering, Electrical Engineering from a recognized university or institution. Additional engineering qualifications or certifications will be advantageous</span></li> <li><span>Minimum 10 years of hands-on engineering and maintenance experience within food, dairy, beverage, or infant nutrition manufacturing</span></li> <li><span>At least 5 years in a similar leadership position within an Infant Nutrition manufacturing environment</span></li> <li><span>Proven experience with leading infant nutrition manufacturers or equivalent organizations</span></li> <li><span>Extensive experience in Preventive Maintenance (PPM) implementation, engineering operations, and asset reliability management</span></li> <li><span>Strong experience in <strong>Spray Drying plant operations and maintenance</strong></span></li> <li><span>Experience maintaining <strong>Can Filling, Sachet Filling, Ready-to-Drink (RTD), and Ready-to-Feed (RTF)</strong> production equipment</span></li> <li><span>Hands-on knowledge of packaging systems including: </span> <ul> <li><span>Tetra Pak</span></li> <li><span>GEA Can Fillers</span></li> <li><span>Rovema packaging equipment</span></li> </ul> </li> <li><span>Knowledge of automated manufacturing equipment, utilities, and engineering control systems</span></li> <li><span>Experience with engineering project commissioning, plant start-ups, and continuous improvement initiatives</span></li> <li><span>Exposure to Lean Manufacturing, TPM, Continuous Improvement, and Six Sigma methodologies</span></li> </ul> <br> <p><span>If you meet the requirements and are looking for a challenging opportunity in a dynamic industry, please apply now. &nbsp;</span></p><br><br> <br> <p><span>Almarai offers an excellent opportunity to join the world's largest vertically integrated dairy company and contribute to the operational excellence of its state-of-the-art Infant Nutrition manufacturing operations.</span></p><br><br> <br> <br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 5+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong><span><span>Senior Engineering Manager (Infant Nutrition) | Al Kharj, Riyadh, Saudi Arabia</span></span></strong></p><br><br> <br> <p><strong><span>The Company&nbsp;</span></strong></p><br><br> <br> <p><span>Founded in 1977, Almarai Company is the world’s largest vertically integrated dairy company and the largest food and beverage manufacturing and distribution company in MENA. Headquartered in Riyadh, Almarai Company is ranked as the number one FMCG Brand in the MENA region and the market leader in all its categories across GCC, Egypt, and Jordan.</span></p><br><br> <br> <p><span>Over five decades of sustainable growth, Almarai has consistently provided nutritious and healthy products to consumers of all ages, driven by its core principle: “Quality you can trust.”</span></p><br><br> <br> <p><span>Almarai has expanded its product range to include, in addition to dairy products, juices and beverages, baked goods, poultry, infant formula, dates, fish and seafood, and bottled water, under more than 20 brands such as Almarai, L’usine, 7DAYS, ALYOUM, Nuralac, Farm’s Select, Ice Leaf, Almira, Seama, Oska, IVAL, Almarai Pro, Premier Chef, Bakemart, and others. </span></p><br><br> <br> <p><span>Almarai currently employs over 46,000 Quality Makers, across the GCC, Egypt &amp; Jordan. &nbsp;&nbsp;In 2025, Almarai reported net income of SAR 2.4 billion on sales of SAR 22 billion.</span></p><br><br> <br> <p><span>An aggressive expansion program together with acquisitions in new vertical markets have created an exciting opportunity to join a dynamic multinational team dedicated to furthering growth plans for the group.</span></p><br><br> <br> <p><strong><span>The Opportunity</span></strong></p><br><br> <br> <p><span>Almarai is seeking a highly experienced Senior Engineering Manager to lead the engineering and maintenance function within our Infant Nutrition manufacturing facility. The successful candidate will be responsible for ensuring optimal plant reliability, operational efficiency, safety compliance, asset performance, and continuous improvement across a highly automated manufacturing environment.</span></p><br><br> <br> <p><span>This role will provide strategic leadership for preventative maintenance, engineering projects, CAPEX planning, budget control, and the development of engineering teams to support world-class infant nutrition production standards. The position requires extensive experience in spray drying technology, packaging systems, and infant formula manufacturing processes while maintaining compliance with quality, food safety, and regulatory requirements.</span></p><br><br> <br> <p><strong><span>Requirements:</span></strong></p><br><br> <br> <ul> <li><span>Bachelor's Degree in Mechanical Engineering, Electrical Engineering from a recognized university or institution. Additional engineering qualifications or certifications will be advantageous</span></li> <li><span>Minimum 10 years of hands-on engineering and maintenance experience within food, dairy, beverage, or infant nutrition manufacturing</span></li> <li><span>At least 5 years in a similar leadership position within an Infant Nutrition manufacturing environment</span></li> <li><span>Proven experience with leading infant nutrition manufacturers or equivalent organizations</span></li> <li><span>Extensive experience in Preventive Maintenance (PPM) implementation, engineering operations, and asset reliability management</span></li> <li><span>Strong experience in <strong>Spray Drying plant operations and maintenance</strong></span></li> <li><span>Experience maintaining <strong>Can Filling, Sachet Filling, Ready-to-Drink (RTD), and Ready-to-Feed (RTF)</strong> production equipment</span></li> <li><span>Hands-on knowledge of packaging systems including: </span> <ul> <li><span>Tetra Pak</span></li> <li><span>GEA Can Fillers</span></li> <li><span>Rovema packaging equipment</span></li> </ul> </li> <li><span>Knowledge of automated manufacturing equipment, utilities, and engineering control systems</span></li> <li><span>Experience with engineering project commissioning, plant start-ups, and continuous improvement initiatives</span></li> <li><span>Exposure to Lean Manufacturing, TPM, Continuous Improvement, and Six Sigma methodologies</span></li> </ul> <br> <p><span>If you meet the requirements and are looking for a challenging opportunity in a dynamic industry, please apply now. &nbsp;</span></p><br><br> <br> <p><span>Almarai offers an excellent opportunity to join the world's largest vertically integrated dairy company and contribute to the operational excellence of its state-of-the-art Infant Nutrition manufacturing operations.</span></p><br><br> <br> <br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 5+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong><span><span>Senior Engineering Manager (Infant Nutrition) | Al Kharj, Riyadh, Saudi Arabia</span></span></strong></p><br><br> <br> <p><strong><span>The Company&nbsp;</span></strong></p><br><br> <br> <p><span>Founded in 1977, Almarai Company is the world’s largest vertically integrated dairy company and the largest food and beverage manufacturing and distribution company in MENA. Headquartered in Riyadh, Almarai Company is ranked as the number one FMCG Brand in the MENA region and the market leader in all its categories across GCC, Egypt, and Jordan.</span></p><br><br> <br> <p><span>Over five decades of sustainable growth, Almarai has consistently provided nutritious and healthy products to consumers of all ages, driven by its core principle: “Quality you can trust.”</span></p><br><br> <br> <p><span>Almarai has expanded its product range to include, in addition to dairy products, juices and beverages, baked goods, poultry, infant formula, dates, fish and seafood, and bottled water, under more than 20 brands such as Almarai, L’usine, 7DAYS, ALYOUM, Nuralac, Farm’s Select, Ice Leaf, Almira, Seama, Oska, IVAL, Almarai Pro, Premier Chef, Bakemart, and others. </span></p><br><br> <br> <p><span>Almarai currently employs over 46,000 Quality Makers, across the GCC, Egypt &amp; Jordan. &nbsp;&nbsp;In 2025, Almarai reported net income of SAR 2.4 billion on sales of SAR 22 billion.</span></p><br><br> <br> <p><span>An aggressive expansion program together with acquisitions in new vertical markets have created an exciting opportunity to join a dynamic multinational team dedicated to furthering growth plans for the group.</span></p><br><br> <br> <p><strong><span>The Opportunity</span></strong></p><br><br> <br> <p><span>Almarai is seeking a highly experienced Senior Engineering Manager to lead the engineering and maintenance function within our Infant Nutrition manufacturing facility. The successful candidate will be responsible for ensuring optimal plant reliability, operational efficiency, safety compliance, asset performance, and continuous improvement across a highly automated manufacturing environment.</span></p><br><br> <br> <p><span>This role will provide strategic leadership for preventative maintenance, engineering projects, CAPEX planning, budget control, and the development of engineering teams to support world-class infant nutrition production standards. The position requires extensive experience in spray drying technology, packaging systems, and infant formula manufacturing processes while maintaining compliance with quality, food safety, and regulatory requirements.</span></p><br><br> <br> <p><strong><span>Requirements:</span></strong></p><br><br> <br> <ul> <li><span>Bachelor's Degree in Mechanical Engineering, Electrical Engineering from a recognized university or institution. Additional engineering qualifications or certifications will be advantageous</span></li> <li><span>Minimum 10 years of hands-on engineering and maintenance experience within food, dairy, beverage, or infant nutrition manufacturing</span></li> <li><span>At least 5 years in a similar leadership position within an Infant Nutrition manufacturing environment</span></li> <li><span>Proven experience with leading infant nutrition manufacturers or equivalent organizations</span></li> <li><span>Extensive experience in Preventive Maintenance (PPM) implementation, engineering operations, and asset reliability management</span></li> <li><span>Strong experience in <strong>Spray Drying plant operations and maintenance</strong></span></li> <li><span>Experience maintaining <strong>Can Filling, Sachet Filling, Ready-to-Drink (RTD), and Ready-to-Feed (RTF)</strong> production equipment</span></li> <li><span>Hands-on knowledge of packaging systems including: </span> <ul> <li><span>Tetra Pak</span></li> <li><span>GEA Can Fillers</span></li> <li><span>Rovema packaging equipment</span></li> </ul> </li> <li><span>Knowledge of automated manufacturing equipment, utilities, and engineering control systems</span></li> <li><span>Experience with engineering project commissioning, plant start-ups, and continuous improvement initiatives</span></li> <li><span>Exposure to Lean Manufacturing, TPM, Continuous Improvement, and Six Sigma methodologies</span></li> </ul> <br> <p><span>If you meet the requirements and are looking for a challenging opportunity in a dynamic industry, please apply now. &nbsp;</span></p><br><br> <br> <p><span>Almarai offers an excellent opportunity to join the world's largest vertically integrated dairy company and contribute to the operational excellence of its state-of-the-art Infant Nutrition manufacturing operations.</span></p><br><br> <br> <br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 5+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong><span><span>Senior Engineering Manager (Infant Nutrition) | Al Kharj, Riyadh, Saudi Arabia</span></span></strong></p><br><br> <br> <p><strong><span>The Company&nbsp;</span></strong></p><br><br> <br> <p><span>Founded in 1977, Almarai Company is the world’s largest vertically integrated dairy company and the largest food and beverage manufacturing and distribution company in MENA. Headquartered in Riyadh, Almarai Company is ranked as the number one FMCG Brand in the MENA region and the market leader in all its categories across GCC, Egypt, and Jordan.</span></p><br><br> <br> <p><span>Over five decades of sustainable growth, Almarai has consistently provided nutritious and healthy products to consumers of all ages, driven by its core principle: “Quality you can trust.”</span></p><br><br> <br> <p><span>Almarai has expanded its product range to include, in addition to dairy products, juices and beverages, baked goods, poultry, infant formula, dates, fish and seafood, and bottled water, under more than 20 brands such as Almarai, L’usine, 7DAYS, ALYOUM, Nuralac, Farm’s Select, Ice Leaf, Almira, Seama, Oska, IVAL, Almarai Pro, Premier Chef, Bakemart, and others. </span></p><br><br> <br> <p><span>Almarai currently employs over 46,000 Quality Makers, across the GCC, Egypt &amp; Jordan. &nbsp;&nbsp;In 2025, Almarai reported net income of SAR 2.4 billion on sales of SAR 22 billion.</span></p><br><br> <br> <p><span>An aggressive expansion program together with acquisitions in new vertical markets have created an exciting opportunity to join a dynamic multinational team dedicated to furthering growth plans for the group.</span></p><br><br> <br> <p><strong><span>The Opportunity</span></strong></p><br><br> <br> <p><span>Almarai is seeking a highly experienced Senior Engineering Manager to lead the engineering and maintenance function within our Infant Nutrition manufacturing facility. The successful candidate will be responsible for ensuring optimal plant reliability, operational efficiency, safety compliance, asset performance, and continuous improvement across a highly automated manufacturing environment.</span></p><br><br> <br> <p><span>This role will provide strategic leadership for preventative maintenance, engineering projects, CAPEX planning, budget control, and the development of engineering teams to support world-class infant nutrition production standards. The position requires extensive experience in spray drying technology, packaging systems, and infant formula manufacturing processes while maintaining compliance with quality, food safety, and regulatory requirements.</span></p><br><br> <br> <p><strong><span>Requirements:</span></strong></p><br><br> <br> <ul> <li><span>Bachelor's Degree in Mechanical Engineering, Electrical Engineering from a recognized university or institution. Additional engineering qualifications or certifications will be advantageous</span></li> <li><span>Minimum 10 years of hands-on engineering and maintenance experience within food, dairy, beverage, or infant nutrition manufacturing</span></li> <li><span>At least 5 years in a similar leadership position within an Infant Nutrition manufacturing environment</span></li> <li><span>Proven experience with leading infant nutrition manufacturers or equivalent organizations</span></li> <li><span>Extensive experience in Preventive Maintenance (PPM) implementation, engineering operations, and asset reliability management</span></li> <li><span>Strong experience in <strong>Spray Drying plant operations and maintenance</strong></span></li> <li><span>Experience maintaining <strong>Can Filling, Sachet Filling, Ready-to-Drink (RTD), and Ready-to-Feed (RTF)</strong> production equipment</span></li> <li><span>Hands-on knowledge of packaging systems including: </span> <ul> <li><span>Tetra Pak</span></li> <li><span>GEA Can Fillers</span></li> <li><span>Rovema packaging equipment</span></li> </ul> </li> <li><span>Knowledge of automated manufacturing equipment, utilities, and engineering control systems</span></li> <li><span>Experience with engineering project commissioning, plant start-ups, and continuous improvement initiatives</span></li> <li><span>Exposure to Lean Manufacturing, TPM, Continuous Improvement, and Six Sigma methodologies</span></li> </ul> <br> <p><span>If you meet the requirements and are looking for a challenging opportunity in a dynamic industry, please apply now. &nbsp;</span></p><br><br> <br> <p><span>Almarai offers an excellent opportunity to join the world's largest vertically integrated dairy company and contribute to the operational excellence of its state-of-the-art Infant Nutrition manufacturing operations.</span></p><br><br> <br> <br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 5+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About Maaden</h3> <p style="margin:0 0 12px; ************;">Maaden, established in 1997, is recognized as one of the world's fastest-growing mining companies and the largest multi-commodity mining and metals company in the Middle East. The company is actively leading the development of the mining industry to establish it as the third pillar of Saudi Arabia’s economy, building a world-class, fully integrated mining value chain.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">The Role: Senior Specialist Fleet Management II</h3> <p style="margin:0 0 12px; ************;">Maaden is seeking a <strong style="font-weight:700;">Senior Specialist Fleet Management II</strong> to join its team in the Khurais oil field. This full-time role is central to managing and controlling fleet operations effectively, ensuring optimal vehicle utilization, safety compliance, cost control, and service reliability across field operations. The specialist will support uninterrupted transportation services through proactive maintenance planning, system management, vendor coordination, performance monitoring, and continuous improvement of fleet efficiency.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities: Fleet Operations and Maintenance</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Oversee general fleet operations to ensure optimal vehicle availability, utilization, and efficiency, including daily vehicle allocation and scheduling.</li> <li style="margin:0 0 6px;">Manage vehicle repair and maintenance activities, ensuring timely completion and adherence to quality standards.</li> <li style="margin:0 0 6px;">Plan, schedule, and monitor preventive maintenance programs for all fleet vehicles.</li> <li style="margin:0 0 6px;">Conduct regular in-person vehicle inspections to verify roadworthiness and condition.</li> <li style="margin:0 0 6px;">Ensure full compliance with safety, legal, and regulatory requirements governing fleet operations.</li> <li style="margin:0 0 6px;">Manage trip requests, including permanent vehicle assignments and pool service scheduling, ensuring efficient allocation and control.</li> <li style="margin:0 0 6px;">Ensure effective TAMM system management, including registering vehicles under correct users, and maintain up-to-date vehicle documentation.</li> <li style="margin:0 0 6px;">Monitor fuel consumption patterns, identify variances, and implement control measures.</li> <li style="margin:0 0 6px;">Coordinate with the Inventory Team to ensure adequate availability of fleet-related spare parts and consumables.</li> <li style="margin:0 0 6px;">Manage accident-related processes, including insurance claims, documentation, and repair follow-up until vehicle closure and return to service.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities: Reporting, Vendor, and Team Supervision</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Maintain accurate daily, weekly, monthly, quarterly, and annual fleet reports, and prepare ad hoc reports for management decision-making.</li> <li style="margin:0 0 6px;">Develop, implement, and monitor fleet KPIs such as downtime, cost per kilometer, fuel efficiency, and availability.</li> <li style="margin:0 0 6px;">Coordinate with fleet service providers and suppliers for vehicle maintenance, repairs, and related services, including reviewing technical proposals and validating invoices.</li> <li style="margin:0 0 6px;">Supervise drivers and the JMS Team performance, including roster planning, policy compliance, and implementing corrective actions.</li> <li style="margin:0 0 6px;">Monitor and respond to Blue Key Users events, formally notifying respective line managers for action.</li> <li style="margin:0 0 6px;">Manage driver petty cash, approve operational expenses, and ensure proper documentation and reconciliation.</li> <li style="margin:0 0 6px;">Review petty cash invoices related to vehicles and supporting documents before submission to the Reporting Team.</li> <li style="margin:0 0 6px;">Raise purchase requisitions for fleet-related assets, items, and services, following up until delivery.</li> <li style="margin:0 0 6px;">Drive initiatives to reduce fleet operating costs, improve efficiency, and enhance service performance.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Minimum Qualifications</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Bachelor’s degree in Mechanical Engineering, Logistics, Transportation Management, or a related discipline, or equivalent relevant fleet management experience.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Required Experience</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Minimum of 8–10 years of experience in fleet operations, transportation management, or related roles.</li> <li style="margin:0 0 6px;">Hands-on experience in fleet systems, maintenance coordination, and compliance management.</li> <li style="margin:0 0 6px;">Experience managing vehicles across multiple sites or remote operations is preferred.</li> <li style="margin:0 0 6px;">Experience working in remote sites, camps, or industrial/mining environments is preferred.</li> <li style="margin:0 0 6px;">Proven experience with audits, reporting, and fleet management systems.</li> </ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Position Overview:</strong> Electrical Maintenance Technician in Paint Shop is responsible for the preventive, corrective, and predictive maintenance of all electrical systems and equipment within the automotive paint shop. The role ensures the safe, reliable, and efficient operation of electrical assets supporting paint shop processes including pre-treatment, E-coat, primer, basecoat, clearcoat, ovens, inspection areas, material handling systems, and utilities. The technician plays a key role in minimizing downtime, ensuring electrical safety, and supporting production and quality targets.</p><p><strong>Responsibilities:</strong></p><ul><li><strong>Electrical Equipment Maintenance:</strong> Perform preventive maintenance on paint shop electrical systems including motors, drives, panels, sensors, actuators, and power distribution equipment. Troubleshoot and repair electrical faults in conveyors, spray booths, ovens, robots, pumps, fans, and utility systems. Identify and rectify issues related to cables, connectors, relays, contactors, VFDs, and safety circuits. Support predictive maintenance through insulation resistance testing, thermal scanning, and condition monitoring.</li><li><strong>Troubleshooting &amp; Breakdown Response:</strong> Respond promptly to electrical breakdowns to restore equipment safely and minimize production downtime. Use electrical drawings, schematics, IO lists, and manuals to diagnose faults. Coordinate with automation and mechanical maintenance teams for integrated troubleshooting. Support root cause analysis (RCA) for recurring electrical failures and implement corrective actions.</li><li><strong>Installation &amp; Commissioning Support:</strong> Assist in installation, wiring, testing, and commissioning of new electrical equipment and panels. Support electrical modifications, upgrades, and retrofits approved by engineering. Verify electrical safety, functionality, and operational readiness before handover to production.</li><li><strong>Safety &amp; Compliance:</strong> Strictly follow electrical safety, LOTO procedures, hazardous-area / ATEX requirements, and PPE usage. Ensure compliance with company standards, OEM guidelines, and applicable electrical codes and regulations. Identify and report electrical safety hazards, near misses, and unsafe conditions.</li><li><strong>Process &amp; Quality Support:</strong> Ensure electrical systems operate within defined process parameters to support stable paint quality. Support electrical checks related to process control, sensors, and monitoring systems. Report electrical abnormalities that may impact paint quality, safety, or equipment reliability.</li><li><strong>Documentation &amp; Coordination:</strong> Complete maintenance work orders, inspection checklists, and fault reports accurately. Maintain records of electrical repairs, inspections, and modifications. Communicate equipment status and electrical risks with supervisors and cross-functional teams.</li></ul><p><strong>Work Environment</strong></p><ul><li>Automotive paint shop, electrical rooms, and maintenance areas. Exposure to ovens, conveyors, and hazardous zones.</li><li>Shift work and on-call support as per production requirements.</li></ul><p><strong>Skills:</strong></p><ul><li>Strong knowledge of industrial electrical systems and controls.</li><li>Experience with motors, drives, sensors, safety circuits, and electrical panels.</li><li>Ability to read and interpret electrical schematics and wiring diagrams.</li><li>Familiarity with paint shop equipment and continuous production lines.</li><li>Basic understanding of PLC IO and automation interfaces (troubleshooting level).</li><li>Strong safety awareness and attention to detail.</li><li>Structured problem-solving ability under pressure.</li><li>Good communication and teamwork skills.</li><li>Ability to work independently and in shift environments.</li><li>Electrical maintenance certification or trade license. (Preferred)</li><li>Electrical safety or LOTO certification. (Preferred)</li><li>Thermal imaging or condition monitoring certification (advantage)</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Qualifications:</strong></p><ul><li>High School Diploma or equivalent; technical training in Electrical Maintenance preferred.</li><li>2-4 years of electrical maintenance experience in automotive manufacturing or paint shop environments.</li><li>Experience with automated paint shop equipment, conveyors, and industrial electrical systems preferred.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>To lead the technical and engineering department of the company, holding full accountability for the assessment, design, and integration of comprehensive solar PV systems across various sectors (Residential, Agricultural, Industrial, and Commercial). The role involves scouting, evaluating, and selecting top-tier global components (Solar Panels, Inverters, Transformers, Cabling, and Thermal/Electrical Protection Systems) to deliver highly efficient, reliable, and cost-effective solar solutions.</p><p><strong>Key Responsibilities</strong></p><p>1. <strong>Technical Evaluation &amp; Component Selection</strong></p><ul><li>Evaluate and approve technical specifications for cutting-edge solar modules (e.g., N-Type, TOPCon, HJT cells) and monitor commercial conversion efficiency ceilings in the market.</li><li>Select and audit solar inverters and Variable Frequency Drives (VFDs) for agricultural water pumping, ensuring maximum MPPT algorithm efficiency under harsh local weather conditions.</li><li>Design and implement innovative thermal insulation and cooling enclosures to protect sensitive inverters and battery banks from extreme summer temperatures.</li><li>Specify DC/AC cabling parameters, conducting precise voltage drop and power loss calculations to optimize overall plant yield (Performance Ratio).</li></ul><p>2. <strong>System Engineering &amp; PV Design</strong></p><ul><li>Oversee the preparation of detailed electrical and mechanical blueprints for projects ranging from residential rooftops to large-scale industrial and agricultural plants (capacities exceeding 400 kW).</li><li>Utilize advanced simulation software to conduct yield assessments, string configuration, shading analysis, and temperature degradation modeling.</li><li>Design robust structural mounting systems and galvanized steel foundations capable of withstanding high wind loads and dust accumulation in open or desert environments.</li></ul><p>3. <strong>Procurement &amp; Vendor Management</strong></p><ul><li>Review, analyze, and technically audit commercial bids submitted by international (Tier 1/Tier 2) and local manufacturers.</li><li>Draft precise Technical Specifications and Requests for Proposals (RFPs) for procurement and contract deployment.</li><li>Conduct techno-economic feasibility studies, calculating Levelized Cost of Energy (LCOE) and Return on Investment (ROI) to present compelling business cases to industrial, commercial, and agricultural investors.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><strong>Educational Requirements</strong></li><li>Core Requirement: Bachelor's Degree in Renewable Energy Engineering or Electrical Engineering (Power &amp; Energy Systems).</li><li>Preferred Qualifications: Master's Degree in Sustainable Energy Engineering or Engineering Project Management.</li><li>Project Management Professional (PMP) certification.</li><li>Globally recognized professional solar certifications (e.g., NABCEP PV Installation Professional or equivalent local regulatory authority certification).</li><li><strong>Professional Experience &amp; Skills</strong></li><li>Experience: Minimum of 7 to 10 years of progressive experience in solar PV system design and deployment, with at least 3 years in a leadership or managerial role overseeing large-scale commercial, industrial, or agricultural solar projects.</li><li>Technical Competencies: Deep knowledge of the global solar supply chain, pricing dynamics, and market-leading brands in the tier-one module and inverter categories.</li><li>Proven hands-on experience designing off-grid direct solar pumping systems (Solar VFDs) and handling heavy inductive loads (e.g., 200 HP water pumps and above).</li><li>Advanced proficiency in industry-standard design and simulation software such as PVSYST, HelioScope, or AutoCAD.</li><li>Soft &amp; Leadership Skills: Strong commercial negotiation skills to audit technical contracts and optimize Balance of System (BOS) costs without compromising quality.</li><li>Analytical problem-solving mindset capable of troubleshooting unexpected site issues (e.g., grid-coupling issues or thermal clipping).</li><li>Ability to lead, mentor, and align a multidisciplinary team of design engineers and field technicians.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>1. Decontamination: - Receives, sorts, and inspects used surgical instruments and medical equipment for decontamination. - Manually cleans instruments using appropriate detergents and disinfectants. - Operates and maintains decontamination equipment such as ultrasonic cleaners, washers, and disinfectors. 2. Preparation and Packaging: - Assembles surgical instrument sets and medical equipment according to established protocols. - Packages instruments and supplies in preparation for sterilization, ensuring proper wrapping, labeling, and documentation. - Inspects instruments for damage or wear and report any issues to the line manager. 3. Sterilization: - Operates sterilizers (e.g., autoclaves) according to manufacturer guidelines and Fakeeh Care policies. - Monitors and documents sterilization cycles, including time, temperature, and pressure parameters. - Performs routine biological, chemical, and mechanical monitoring tests to ensure effective sterilization. 4. Storage and Distribution: - Stores sterilized instruments and supplies in designated storage areas, ensuring proper rotation and inventory control. - Distributes sterilized instruments and equipment to operating rooms, clinics, and other departments as required. - Maintains accurate records of sterilization processes and inventory levels. 5. Quality Control and Safety: - Adheres to all infection control and safety protocols to prevent cross-contamination and ensure a safe working environment. - Participates in regular equipment maintenance, calibration and performance checks, and quality improvement initiatives. Report any equipment malfunctions/ incidents or safety concerns to the supervisor. 6. Compliance and Documentation: - Ensures compliance with all regulatory standards, including Joint Commission, OSHA, and facility-specific policies. - Maintains accurate records of sterilization processes, inventory management, and quality control measures. 7. Professional Development: - Stay updated on advancements in sterilization techniques and technologies through ongoing education and training. - Participates in departmental meetings and contributes to continuous improvement initiatives. - Attends all mandatory training as scheduled. - Demonstrates compassionate communication skills while providing support and care to the patients and staff. - Maintain a positive and proactive approach to challenges. All Fakeeh Care employees are responsible for continuous improvement, including: 1. Performing all duties and tasks in a manner that supports Fakeeh s Person-Centered care values. 2. Actively contributing to continuous improvement initiatives, within the scope of the role. 3. Adherence to safety protocols and proactively seeking to address any job-related safety concerns. 4. Maintaining strict confidentiality of all sensitive information accessed or encountered during work. 5. Complying with cybersecurity policies and standards to protect Fakeeh s systems and participating in awareness training and initiatives to prevent cyber threats. 6. Adhering to and upholding Fakeeh Care s code of conduct, policies and ethical standards. 7. Completion of mandatory education as per the requirement, at least one month prior to expiration.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Skills and Abilities: - Service Oriented - Attention to Details - Critical Thinking - Must possess Excellent Interpersonal Skills</li><li>Experience: Minimum of 1-year experience as a certified sterilization technician in a clinically complex tertiary center. Knowledge of Performance Improvement Process and International Standards.</li><li>Education: Bachelor s degree associate or Health Science, or similar discipline Certification in sterile processing / Diploma in sterilization</li><li>Language: Excellent command of oral and written English</li><li>Licenses / Certifications: License from the country of origin, License for practice as per the regional health regulatory authority e.g. (SCFHS / DHA), BLS, ACLS and other LSTC courses as applicable.</li></ul><p></p></section>

We’re Hiring | Physical Security Pre-sales Engineer<p><br></p><p>We are seeking an experienced and highly motivated <strong>Physical Security Pre-sales Engineer</strong> to join our team in Riyadh.</p><p><br></p><p>The successful candidate will support the Sales and Business Development teams in designing integrated physical security solutions, developing customer opportunities, preparing technical proposals and tender submissions, and providing technical expertise throughout the sales cycle for <strong>government, enterprise, and major commercial customers</strong>.</p><p><br></p><p><strong>Location:</strong> Riyadh, Saudi Arabia</p><p><strong>Experience:</strong> Minimum 3–5 years in Physical Security Systems Pre-sales / Solution Engineering</p><p><br></p>Key Responsibilities<p><br></p><ul><li>Work closely with Sales and Business Development teams to understand customer requirements and develop appropriate technical solutions.</li><li>Participate in developing customer opportunities and supporting business development activities.</li><li>Conduct client meetings, site surveys, technical assessments, presentations, and product demonstrations.</li><li>Design integrated physical security solutions, including <strong>CCTV, VMS, Access Control, Intrusion Detection, Intercom, ANPR, Perimeter Protection, Road Blockers, Bollards, Gates, and related security infrastructure</strong>.</li><li>Prepare <strong>technical proposals, BoQs, compliance matrices, system architectures, drawings, and technical documentation</strong>.</li><li>Review RFPs, RFQs, tender specifications, and scopes of work to ensure full technical compliance.</li><li>Prepare cost estimates and coordinate with Procurement, manufacturers, and vendors to obtain competitive technical and commercial proposals.</li><li>Optimize solution designs to achieve technical compliance while maintaining commercial competitiveness.</li><li>Develop system architectures, network topologies, equipment selections, and integration requirements.</li><li>Coordinate with project and technical teams to ensure a smooth handover from pre-sales to project execution.</li><li>Build and maintain strong relationships with customers, consultants, manufacturers, technology partners, and suppliers.</li><li>Stay current with emerging physical security technologies, industry standards, and market developments.&nbsp;<br></li></ul>Requirements<ul><li>Bachelor’s degree in <strong>Electrical, Electronics, Computer, Telecommunications Engineering, IT</strong>, or a related technical field.</li><li>Minimum <strong>3–5 years of relevant experience</strong> in Physical Security Systems Pre-sales, Solution Design, or Technical Sales.</li><li>Strong technical knowledge of <strong>CCTV, VMS, Access Control, Intrusion Detection, Intercom, ANPR, and Perimeter Security Systems</strong>.</li><li>Proven experience preparing <strong>BoQs, technical proposals, compliance matrices, system designs, and tender submissions</strong>.</li><li>Good understanding of <strong>IP networking, system integration, servers, storage, and security system architecture</strong>.</li><li><strong>Established customer portfolio and professional network within the Saudi physical security market, with the ability to identify and support new business opportunities.</strong></li><li>Existing relationships with <strong>government, enterprise, consultants, and major commercial customers</strong> are highly preferred.</li><li>Experience working with major physical security manufacturers and technology partners.</li><li>Experience with <strong>government and enterprise tenders in Saudi Arabia</strong> is highly preferred.</li><li>Proficiency in <strong>AutoCAD and relevant design/documentation tools</strong> is preferred.</li><li>Strong communication, presentation, and customer-facing skills.</li><li>Good command of <strong>English</strong>; Arabic is an advantage.</li><li>Ability to manage multiple tenders and opportunities simultaneously under tight deadlines.&nbsp;</li></ul><p><br></p>

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About the Role</h3> <p style="margin:0 0 12px; **********<strong>;">NVIDIA is seeking a Developer Technology Engineer specializing in Energy to accelerate simulation and AI workflows on NVIDIA platforms. This full-time position in Saudi Arabia involves optimizing CUDA performance for various workloads, including seismic processing, reservoir simulation, and power grid simulators. The role requires 5-10 years of experience.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Role Context and Focus</h3> <p style="margin:0 0 12px; </strong>********<strong>;">This role focuses on advancing NVIDIA's computing model, which is centered on visual and AI computing. The Developer Technology Engineer will work directly with customer and partner engineering teams, as well as NVIDIA's internal product and engineering groups, to achieve measurable speedups and scalable performance on multi-GPU and multi-node systems. The primary objective is to enhance the effectiveness of NVIDIA's GPU technology in solving complex problems within the Energy sector.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Profile, analyze, and optimize GPU-accelerated applications, with a focus on CUDA kernels, memory movement, concurrency, and end-to-end throughput.</li> <li style="margin:0 0 6px;">Drive performance improvements across the stack, including CUDA C++ kernel optimization, launch configuration, memory hierarchy, streams/events, and GPU libraries (cuBLAS, cuFFT, cuSPARSE, cuSOLVER, NCCL).</li> <li style="margin:0 0 6px;">Implement multi-GPU and multi-node scaling using MPI + NCCL, CPU/GPU overlap, and communication patterns.</li> <li style="margin:0 0 6px;">Build reproducible benchmarks, performance reports, and tuning recommendations, detailing methodology and scaling curves.</li> <li style="margin:0 0 6px;">Develop and maintain reference implementations, examples, and/or patches to customer code to ensure performance and portability.</li> <li style="margin:0 0 6px;">Support customer engagements from Proof of Concept (POC) to production, including debugging correctness/performance issues and advising on deployment best practices (containers, schedulers, clusters).</li> <li style="margin:0 0 6px;">Collaborate with internal teams to file actionable issues, validate fixes, and influence the product roadmap based on customer requirements in the Energy sector.</li> <li style="margin:0 0 6px;">Build internal libraries and reusable code that can contribute to future NVIDIA products.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Required Experience</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Candidates should possess 5-10 years of experience in a relevant field.</li> <li style="margin:0 0 6px;">Demonstrated expertise in computer science and engineering, particularly in accelerating Energy simulation and AI workflows.</li> <li style="margin:0 0 6px;">Experience with CUDA performance optimization for workloads such as seismic processing, reservoir simulation, and power grid simulators.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About NVIDIA</h3> <p style="margin:0 0 12px; </strong>********<strong>;">NVIDIA has been a pioneer in visual computing for two decades, with the invention of the GPU. The company's work is dedicated to a computing model focused on visual and AI computing. Today, NVIDIA’s GPU technology is applied to simulating human intelligence, running deep learning algorithms, and serving as the core processing unit for advanced systems such as robots and self-driving cars.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Application Process</h3> <p style="margin:0 0 12px; </strong>**********;">NVIDIA seeks individuals who are creative and autonomous. Qualified candidates are encouraged to apply for this full-time position.</p>

<p>The opportunity We are seeking a motivated and enthusiastic GIS I&amp;C Engineer to join our team. In this role, you will be working as a GIS I&amp;C Engineer to cover all the activities/actions required to enable switching systems to be successfully installed, repaired and any faults eliminated. You will be responsible for installation of high voltage systems worldwide for PGHV. He/she represents PG in general through his presence and technical knowledge and PGHV specifically in dealings with the client at the installation site. The deadlines issued for each project are adhered to, whereby the cost-performance ratio must always be borne in mind in this respect. He/she embodies the PG QA philosophy, considering the special conditions on the construction sites. You will be responsible for the installation &amp; commissioning work entrusted to him being carried out in perfect technical order.</p><p>How you ll make an impact</p><ul><li>Carrying out installation and maintenance work independently.</li><li>Ensuring compliance with the installation requirements and Instructions &amp;ensures that the necessary accident prevention measures are observed; specifically, he abides by the guidelines for work on live system components.</li><li>Responsible for red-mark drawings/documents with any changes or modification that became necessary during the installation.</li><li>Advising the sub-supplier's installation superintendent in planning and coordination of the work force necessary to comply with the schedule.</li><li>Cooperating with PG Project Manager on establishing status of completed and non-completed work.</li><li>Inspecting of arriving material for completeness and possible damage and coordination of material handling in cooperation with sub-suppliers Material Control within sub-suppliers' procedures.</li><li>Issuing non-conformance reports for damage or missing equipment within PG scope of supply in cooperation with PG Project Manager.</li><li>Supervising final installation &amp; commissioning tests and PG installation completion documentation.</li><li>Supervising and coordinating the loop check activities and participation at site meetings as requested by the PG-CH Project Manager.</li><li>Responsible for the competence execution of his tasks.</li><li>Carry out any tasks that are assigned by management necessary to fulfil the job requirements.</li><li>Responsible for ensuring compliance with applicable external and internal regulations, procedures, and guidelines.</li><li>Living Hitachi Energy s core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>A bachelor's degree or diploma in Electrical Engineering is required.</li><li>Minimum 2-5 years of experience with GIS is preferred.</li><li>Previous experience with SF6 GAS-Handling and PGHV Transmission &amp; Sub transmission GIS Product knowledge preferred.</li><li>Having capability to use MS project professionally.</li><li>Proficiency in both spoken &amp; written English language is required.</li></ul>

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About the Role</h3> <p style="margin:0 0 12px; **********<strong>;">St. Regis Hotels &amp; Resorts is seeking an Engineer III to join its team in the Red Sea region. This full-time position requires 2-5 years of experience and involves maintaining the operational integrity of hotel facilities and equipment. The role is part of the Marriott International portfolio, focusing on delivering exceptional service through meticulous maintenance and support.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Company Overview</h3> <p style="margin:0 0 12px; </strong>********<strong>;">St. Regis Hotels &amp; Resorts operates over 50 luxury hotels and resorts globally, known for combining timeless charm with a pioneering spirit. Since its inception by John Jacob Astor IV, the brand has provided personalized, impeccable, and attentive service. As part of Marriott International, St. Regis values diversity and aims to create an inclusive environment where employees are respected and given opportunities for professional growth.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Respond to and address customer repair requests and maintenance issues.</li> <li style="margin:0 0 6px;">Perform preventive maintenance on tools and equipment, including cleaning and lubrication, and conduct visual inspections.</li> <li style="margin:0 0 6px;">Transport equipment such as tools and radios, and identify, locate, and operate all equipment shut-off valves.</li> <li style="margin:0 0 6px;">Manage maintenance inventory, order necessary parts and supplies, and record information on unfinished tasks before shift changes.</li> <li style="margin:0 0 6px;">Adhere to all safety and security policies, report hazards or incidents, complete required safety training, and properly store flammable materials.</li> <li style="margin:0 0 6px;">Maintain a clean and professional appearance, ensure confidentiality of brand and hotel information, and protect company property.</li> <li style="margin:0 0 6px;">Welcome guests according to brand standards, anticipate needs, assist disabled persons, and ensure compliance with quality requirements.</li> <li style="margin:0 0 6px;">Foster positive professional relationships with colleagues, collaborate to achieve common goals, and communicate effectively.</li> <li style="margin:0 0 6px;">Perform physical tasks including moving, lifting, carrying, pushing, pulling, and placing loads up to 23 kilograms independently.</li> <li style="margin:0 0 6px;">Climb stairs, service access points, and ladders, and perform movements such as bending, turning, pulling, and stooping.</li> <li style="margin:0 0 6px;">Execute any other tasks as assigned by management that are consistent with the position.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Qualifications and Requirements</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">2-5 years of experience in a relevant engineering or maintenance role.</li> <li style="margin:0 0 6px;">Ability to communicate clearly and courteously in all interactions.</li> <li style="margin:0 0 6px;">Proficiency in identifying and resolving maintenance issues.</li> <li style="margin:0 0 6px;">Capability to perform physical tasks as described, including lifting and various movements.</li> <li style="margin:0 0 6px;">Commitment to following safety and security procedures.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Work Environment</h3> <p style="margin:0 0 12px; </strong>********<strong>;">The Engineer III will work in a full-time capacity within a luxury hotel environment in the Red Sea. The role requires adherence to high standards of service and professionalism, contributing to a team dedicated to guest satisfaction and operational excellence.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Application Process</h3> <p style="margin:0 0 12px; </strong>**********;">Interested candidates are invited to apply. St. Regis Hotels &amp; Resorts, a Marriott International brand, is committed to equal employment opportunities and values a diverse workforce.</p>

<div>We are seeking an experienced HSE Engineer to join our Construction Supervision team in Jeddah, Saudi Arabia. The successful candidate will support the delivery of major transport, road, and infrastructure utilities projects, ensuring compliance with project HSE requirements, Saudi regulations, and international best practices. This is a site-based supervision role requiring extensive experience working with engineering consultants on infrastructure projects within Saudi Arabia.</div> <div> <ul> <li>Bachelor's Degree in Engineering or related discipline.</li> <li>Professional HSE qualification such as NEBOSH IGC, NEBOSH Construction Certificate, IOSH, or equivalent.</li> <li>Minimum 8 to 12 years of overall experience with at least 5 years of experience in Saudi Arabia.</li> <li>Demonstrated experience on transportation, roads, highways, infrastructure, and utility projects within KSA.</li> <li>Previous experience working for engineering consultants or construction supervision consultants is essential.</li> <li>Strong knowledge of Saudi HSE regulations, infrastructure construction risks, and industry best practices.</li> <li>Experience monitoring utility works including wet and dry utilities, stormwater, drainage, potable water, irrigation, power, and telecommunications networks.</li> <li>Excellent report writing and communication skills in English.</li> <li>Ability to engage effectively with contractors, client representatives, and project stakeholders.</li> <li>Saudi Council of Engineers registration preferred.</li> <li>Relevant professional certifications and training in construction safety will be an advantage.</li> <li>Candidates must have a dominant background in KSA infrastructure supervision projects and consultant-side delivery.</li> <li>Candidates with primary experience in building projects, contractor-only environments, design offices, or corporate HSE roles are not preferred.</li> </ul> <p> </p> <p>Imagine a better future for you and a better future for us all.</p> <p>Work with us and be part of a team shaping the future of infrastructure and sustainable communities across Saudi Arabia and beyond.</p> </div> <div> <ul> <li>Monitor contractor compliance with project HSE requirements, specifications, and approved safety plans.</li> <li>Conduct regular site inspections, audits, and safety observations across road, utility, and infrastructure works.</li> <li>Review and monitor method statements, risk assessments, permit systems, and emergency response procedures.</li> <li>Identify unsafe acts and conditions and ensure timely implementation of corrective and preventive actions.</li> <li>Support the Resident Engineer in enforcing project health, safety, and environmental requirements.</li> <li>Monitor excavation works, utility diversions, traffic management activities, lifting operations, and confined space works.</li> <li>Review contractor HSE performance and prepare daily, weekly, and monthly safety reports.</li> <li>Participate in incident investigations and verify the implementation of corrective measures.</li> <li>Coordinate with project stakeholders to promote safety awareness and continuous improvement initiatives.</li> <li>Monitor environmental compliance relating to waste management, dust control, noise mitigation, and environmental protection measures.</li> <li>Ensure compliance with Saudi regulations, client requirements, and international HSE standards.</li> <li>Conduct toolbox talks, safety briefings, and site inductions as required.</li> <li>Maintain accurate records of inspections, audits, incidents, and corrective action tracking.</li> </ul> </div>