Cost Engineer Jobs - Tabuk Saudi

<p>Architect required</p><p>An engineering entity announces a job vacancy for an <strong>Architect</strong> according to the following requirements:</p><ul><li>Bachelor's degree in Architecture.</li><li><strong>Holder of a 6-month Fire Safety and Prevention course – mandatory requirement.</strong></li><li>Experience in the field of <strong>Fire Safety and Prevention</strong>.</li><li>Experience in preparing, designing, and reviewing <strong>architectural drawings</strong>.</li><li>Proficiency in preparing and reviewing <strong>technical drawings and reports</strong>.</li><li>Proficiency in using <strong>AutoCAD</strong>, with preference for <strong>Revit</strong> proficiency.</li><li>Proficiency in using <strong>Microsoft Office</strong> programs.</li><li>Ability to work within a team and communicate effectively.</li><li>Preference for those with experience in preparing drawings and documents related to fire safety and prevention regulations.</li></ul><p><strong>Note:</strong><br>Those who do not hold a <strong>6-month Fire Safety and Prevention course</strong>, we request that you do not send your CV.</p><p><strong>Important Warning:</strong><br>A <strong>6-month Fire Safety and Prevention course</strong> is required; those who do not possess the course, we request that you do not send your CV.</p><p>&nbsp;</p>

Be the Change. Join the World’s Most Visionary Developer.<br>Coastal Contracting Company, a proud subsidiary of Red Sea Global, stands apart with its unwavering commitment to quality craftsmanship, excellence, and exceptional service. Trusted with challenging and creative projects, we deliver a wide range of services through a meticulous and innovative approach to project management.<br>Since our inception, we have been dedicated to transforming ideas into reality while maintaining our commitment to both people and the planet.<br>As a purpose-driven company, we actively contribute to Saudi Arabia’s Vision 2030 and lead the global movement toward regenerative tourism – ensuring a sustainable and prosperous future for generations to come.<br>Join us and be part of the positive change for Saudi Arabia and the world.<br><br>Job Purpose:<br>The Senior Planning Engineer has overall responsibility for the management of Planning Engineers to ensure planning work on Coastal Contracting Company projects is undertaken in compliance with Coastal Contracting Company Planning Manual requirements, in line with the required timeframes to the expected quality. The qualified candidate will have the specialized domain knowledge and commitment to excellence expected by the Coastal Contracting Company team.<br><br>Job Responsibilities:<br>Supporting the planning function across a portfolio of projects, providing analysis of cost and schedule trend information, the identification of critical path changes risks for specific projects or across a portfolio of projects. Establish, review and control schedule quality outputs for multiple consultants and contractors across a range of projects Responsible for the generation and reporting of all planning related matters – risks, CPM management, change control etc across the portfolio. Contributes to value engineering and constructability reviews. Manages the resolution of planning phase risk associated with the clarity, specificity and completeness of construction documents. Support the assessment of consultant and contactor time-related claims and advise Coastal Contracting Company of final determinations on the same. Provide executive level strategic advice to Coastal Contracting Company management teams, including the writing of management reports and delivering presentations to the executive.<br><br>Qualifications and Experience:<br>Bachelor of Science in Engineering or any other construction / development related degree.8–10 years’ experience in a large-scale mixed-used development project is desirable. Project Management certification / diploma / master’s is preferable. Proficiency in Primavera planning software (latest version).

<h3 >About Bouygues Travaux Publics KSA and the Role</h3> <p >Bouygues Travaux Publics KSA specializes in civil engineering, underground tunneling, and complex structures, delivering major infrastructure and land-use projects worldwide. As part of Bouygues Travaux Publics, the company is committed to sustainable construction and diversity. We are seeking a <strong >Project Data Senior Engineer</strong> to join our team in Al Ula, Tabuk, KSA. This full-time role requires 2-5 years of relevant experience.</p> <h3 >The Project Data Senior Engineer Role</h3> <p >The Project Data Senior Engineer is responsible for ensuring the integrity and completeness of design data throughout the project lifecycle. This role involves critical analysis of design packages, managing quantity take-offs, and maintaining integrated 3D models to support procurement, construction, and project control functions on major infrastructure projects.</p> <h3 >Key Responsibilities</h3> <ul > <li >Review incoming excavation and building design packages to ensure data completeness, model integrity, geometry, quantities, and technical specifications are suitable for procurement and construction.</li> <li >Extract and validate Material Take-Offs (MTOs), including excavation volumes, ground support systems, rockbolts, steel sets, structural, architectural, and MEP quantities.</li> <li >Develop and maintain an integrated 3D design model, incorporating design updates and monitoring design maturity at key project stages.</li> <li >Track quantity changes resulting from design revisions and provide clear variance analyses to Technical, Estimating, Finance, Procurement, and Operations teams.</li> <li >Identify design inconsistencies, clashes, missing information, and multidisciplinary coordination issues; escalate critical items to the Technical Director.</li> <li >Maintain traceability of design assumptions, model versions, RFIs, and design changes, ensuring all information is appropriately documented and controlled.</li> <li >Support the preparation of cost baselines, work-package scopes, and procurement requirements through accurate and validated design data.</li> <li >Contribute to the definition of design interfaces, handover points, trade sequencing, and construction phasing requirements.</li> <li >Develop 4D model outputs, visualizations, and construction sequence simulations to support planning, site access, and delivery coordination.</li> <li >Coordinate the integration of survey and as-built information into the project model.</li> <li >Compare as-built conditions and quantities against design and contractual requirements, highlighting discrepancies and supporting remedial-work or change assessments.</li> <li >Work closely with Design, Technical, Construction, Procurement, Planning, and Commercial teams to ensure design information is translated into construction-ready deliverables.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Bachelor’s degree in Civil Engineering, Geotechnical Engineering, Construction Engineering, BIM/Digital Engineering, or a related discipline.</li> <li >Proven experience (2-5 years) in BIM/VDC, design coordination, digital engineering, or model-based quantity management on major construction or infrastructure projects.</li> <li >Experience in underground works, tunneling, rock excavation, or ground-support systems is highly desirable.</li> </ul> <h3 >Essential Skills and Technical Proficiency</h3> <ul > <li >Strong ability to review multidisciplinary design models and identify coordination issues, data gaps, and constructability risks.</li> <li >Demonstrated experience in Material Take-Offs, quantity tracking, design change management, and model version control.</li> <li >Proficiency with BIM and coordination tools such as Solibri, Navisworks, Revit, and/or Civil 3D; experience with 4D planning tools is an advantage.</li> <li >Good understanding of construction sequencing, work packaging, procurement interfaces, and as-built data management.</li> <li >Strong analytical and problem-solving skills, with a high level of accuracy and attention to detail.</li> <li >Ability to communicate complex technical information clearly and work effectively with multidisciplinary stakeholders.</li> <li >Fluent English communication skills, both written and verbal.</li> </ul> <h3 >Application Information</h3> <p >Candidates meeting the above requirements are encouraged to apply for this full-time position in Al Ula, Tabuk.</p>

ACWA Operations:At Acwa Operations, we make essential services dependable and efficient for the millions of people who rely on them every day. Formerly NOMAC (The First National Operations & Maintenance Company), we are the operations and maintenance arm of Acwa, focused on keeping power generation and water desalination assets running safely, reliably and cost-effectively across their full lifecycle. Since 2005, we have partnered with clients across the Middle East, Africa and Asia to support complex infrastructure that powers communities and sustains economies. As part of Acwa, we bring deep technical knowledge, strong operational systems and a culture built on performance and accountability. Our work covers everything from commissioning and asset management to preventive and corrective maintenance, technical support and continuous performance improvement. We know that reliability and cost discipline aren’t just technical goals, they determine whether people have light at night, water in their homes and industry can operate without interruption. By maximising asset availability, enhancing resilience and upholding the highest safety and quality standards, Acwa Operations contributes directly to Acwa’s mission to deliver sustainable, affordable energy and water solutions that advance people’s lives and strengthen communities worldwide.<br>Marafiq Red Sea Project:The Red Sea Utilities Multi-Utilities Project is a landmark greenfield initiative developed by ACWA Power in partnership with Red Sea Global, supporting Saudi Arabia’s premier tourism destination along the Red Sea coast. Under a 25-year Utilities Concession Agreement, ACWA Power is responsible for the development, construction, operation, and eventual transfer of a fully integrated, off-grid utilities infrastructure. The project includes a 340 MWac solar PV plant combined with one of the world’s largest captive-scale battery energy storage systems (1,000–1,200 MWh), enabling 24/7 clean energy supply. In addition to renewable power, the scope covers seawater desalination (up to 32,500 m³/day), wetlands-based sewage treatment (16,000 m³/day), district cooling (32,500 RT), and zero-landfill waste management (~11,775 t/year).<br>Reporting to:Operations Manager<br>Job Purpose:Lead the safe, efficient and reliable operation of power generation assets at RSP (PV/BESS, auxiliaries and integration to RO/DCP/STP interfaces), ensuring compliance with grid codes, OEM recommendations and NOMAC HSSE standards, to maximise availability and performance.<br>Key Accountabilities:Operations Management Oversee day-to-day generation operations including start-up, shutdown and load management across PV/BESS and balance-of-plant. Monitor alarms, trends and KPIs; coordinate response to deviations and abnormal events; implement corrective actions to prevent recurrence. Ensure adherence to dispatch instructions and grid requirements; coordinate with CCC/SCADA and Shift teams. Technical Governance:Own and continuously improve operating procedures, SOPs and LOTO; ensure robust PTW implementation. Support root cause analyses and lead implementation of corrective and preventive actions. Outage & Maintenance Interface:Coordinate with Maintenance and Performance teams for planned outages and emergent work to minimise downtime and production losses. Validate commissioning/return-to-service for power systems after maintenance HSSE & Compliance:Champion HSSE culture; ensure compliance with NOMAC/ACWA standards and RSG site rules; participate in audits and drills. People & Stakeholder Management:Guide Shift Engineers/Operators; provide on-the-job coaching and ensure skills are current; liaise with PGM, O&M and external stakeholders as required.<br>Communication & Working Relationships:Internal:PGM, Operations Supervisors, Maintenance (Electrical/Mechanical/I&C), Performance Assurance, HSE, Supply Chain, Finance. External:Grid operator, EPC/OEMs, RSG counterparts and contractors.<br>Minimum Qualifications:Bachelor’s Degree in Electrical/Mechanical/Power Engineering or equivalent8–10+ years in power generation operations with experience in PV/BESS or conventional generation and plant utilities; at least 3 years in a senior/lead role.<br>Skills:Strong knowledge of power plant systems (PV inverters, BESS, transformers, GIS/AIS switchgear, protection, auxiliaries). SCADA/CCR operations proficiency and incident response. Procedure authoring, RCA and continuous improvement. Knowledge of IMS/ISO 9001, 14001, 45001; PTW/LOTO. Leadership and stakeholder management.

POSITION SUMMARYThis position will be part of NGHC (Neom Green Hydrogen Company) Operations based in Neom The Principal Process Safety Engineer is the technical cornerstone to the NGHC safety culture, where safety is in our DNA. This role manages the distinct high pressure and extreme flammability hazards of green hydrogen and the toxicity hazards of green ammonia among the process operating complexities of the plant. The role is responsible to lead all safety initiatives relative to the industrial processes on behalf of NGHC, facilitating the application of engineering principles for the design, construction, operation and maintenance on the NEOM Green Hydrogen Company, with the objective to develop, implement and maintain the Process Safety Management System for the company. The incumbent shall support all interface activities between all project contractors and NGHC as needed to support all Process Safety deliverables. NATURE & SCOPE<br>Lead and provide process safety services during the design and construction of all NEOM Green Hydrogen Company projects, including the remaining design and construction of the plant currently underway, ensuring that all related activities meet legal requirements and comply with project and industry safety standards. Provide expert process leadership and support for corporate business development initiatives. Serve as the Subject Matter Expert (SME) for hydrogen and ammonia safety chemistry, including embrittlement, cryogenic storage, and toxicity dispersion. Provide process safety training for project engineers, asset and reliability engineers, and integrated management and continuous improvement facilitators. Support operations’ process engineers. Own the Management of Change for process safety. Ensure seamless safety transitions Fulfil the role of Technical Authority for Technical Safety on behalf of NGHC for both the Project and Operations Establish and maintain technical safety standards, process safety operating procedures and systems as the Technical Authority Develop and conduct company process safety standards, tools, programs, training programs and work processes. Identify and implement continuous improvement efforts, including sustaining capital projects, for improved safety process performance. Lead and/or participate in Process Hazard Reviews, Gas Dispersion Modelling, Hazardous Area Classification, process safety studies, technical risk assessments, etc. to support the Project and Operations teams. Provide process safety consulting support and recommend optimal solutions to the site’s project execution, engineering, operating and commercial teams in execution of process safety requirements and to ensure compliance to Company standards and policies. Assist in the interpretation of national and local process safety Regulatory/Code requirements for Saudi Arabia and provide guidance to the site team. Assist in the assessment or review for regulatory and permitting process as required. Lead and support Root Causes Analysis (RCA) investigations for process safety. Apply Human Performance principles to process safety, particularly with RCAs and MOCs. Lead, facilitate, and train staff on HAZOP, HAZID, LOPA, and Quantitative Risk Assessments (QRA). Function as industry liaison to best practices in process safety including the Center for Chemical Process Safety (CCPS) in the American Institute of Chemical Engineers (AIChE) and The Mary Kay O’Connor Process Safety Center. Participate in leading industry forums to keep NGHC on the cutting edge of safety. Influence emerging global standards to improve industry safety practices while providing cost effective solutions. Oversee advanced consequence modeling for fire, explosion, and toxic gas release scenarios. Collaborate with the control systems engineers and instrument engineers to manage the Safety Instrumented Systems (SIS) lifecycle to ensure that the Safety Integrity Levels (SILs) meet targets. Identify and facilitate engineering and administrative improvements to reduce risk. Lead process safety standard improvement initiatives. Work closely with the NGHC projects and O&M team. Conduct dangerous goods assessments and compliance checks in support of permitting or licensing requirements. Provide support as required to ensure the successful implementation and execution of the NGHC Audit Plan PRINCIPAL DUTIES AND RESPONSBILITIESLead all safety initiatives relative to the industrial processes on behalf of NGHC, facilitating the application of engineering principles for the design, construction, operation and maintenance on the NEOM Green Hydrogen Company, with the objective to develop, implement and maintain the Process Safety Management System for the company. The incumbent shall support all interface activities between the Contractor and Company as needed to support all Process Safety deliverables. People Management Will manage the contractors that provide project, engineering, and construction services.<br>ESSENTIAL EDUCATION and/or QUALIFICATIONS REQUIREDBachelor’s degree in engineering with experience in Process and Process Safety Engineering.<br>DESIRED EDUCATION and/or QUALIFICATIONS REQUIREDTraining or certification from the Mary Kay O'Connor Process Safety Center (MKOPSC)

POSITION SUMMARYStaff Asset and Reliability Engineer is a high-level technical position foundational to the operation and maintenance of the facilities. NATURE & SCOPE<br>Staff Asset and Reliability Engineer drives improvements in asset performance, reliability, and lifecycle management. This role is key to ensuring our critical equipment and systems perform optimally while minimizing downtime and maximizing return on investment. This engineer combines deep technical expertise with strategic insight to deliver asset management and reliability engineering best practices, support maintenance strategies, and mentor junior engineers.<br>KEY RESPONSIBILITIES<br>Asset Management:Lead asset lifecycle planning including acquisition, operation, maintenance, and disposal strategies. Develop and maintain the asset register and criticality rankings. Analyze asset performance data to identify trends, optimize performance, and extend asset life. Collaborate with finance and operations to develop capital and replacement plans.<br>Reliability Engineering:Conduct Root Cause Failure Analysis (RCFA) and Failure Modes and Effects Analysis (FMEA/FMECA). Develop, review, and refine preventive and predictive maintenance strategies using RCM principles. Implement reliability improvement projects for critical assets and systems. Monitor and optimize key reliability metrics (MTBF, MTTR, asset availability, etc.).<br>Technical Leadership:Serve as SME (Subject Matter Expert) for condition monitoring, asset health, and reliability tools. Lead cross-functional reliability improvement teams and mentoring of junior staff. Interface with OEMs, vendors, and contractors to resolve complex technical issues.<br>Systems and Tools:Utilize EAM/CMMS platform for maintenance planning and analysis. Support implementation of digital tools such as APM (Asset Performance Management), IoT sensors, or data analytics platforms. Develop dashboards and reports to communicate asset health and reliability performance.<br><br>EDUCATION & EXPERIENCE:Bachelor’s degree in an engineering discipline. Minimum of 10 years of maintenance and reliability engineering experience in an operating industrial plant with 5 years specifically related to reliability and asset engineering. Strong knowledge of asset management frameworks. Proficiency in RCA, RCM, REX, FMEA/FMECA, Weibull analysis, and reliability-centered maintenance tools, maintenance data analysis and reporting methods. Safety-conscious with strong knowledge of maintenance and safety consensus standards and best practices. Familiar with regulatory and environmental compliance requirements. Strong knowledge of condition monitoring technologies. Experience in one or more of: hydrogen electrolysis, hydrogen storage, ammonia production, power systems, air separation. Familiarity with stage-gated capital project processes and asset handover requirements.

We are currently looking for experienced Site QC Communication Engineer to support our projects across the Southern, Western, and Northern regions of Saudi Arabia.<br>Location:Southern, Western & Northern Regions, Saudi Arabia. The exact project location will be confirmed after the personal interview.<br>Key Requirements:Bachelor’s Degree in Electrical Engineering or Instrumentation Engineering (or equivalent). Minimum 5 years of experience. Certified ISO 9001:2015 QMS Internal Quality Auditor. Strong knowledge of OSP (Outside Plant) and PDS (Premise Distribution System) installation. Familiarity with BICSI Telecommunications Distribution Methods Manual (TDMM). Good understanding of National Electrical Codes (NEC) and National Electrical Safety Codes (NESC) or equivalent international standards. Knowledge of International Telecommunications Standards.<br><br>#Telecommunications #Communications

Egis is a leading global architectural, consulting, construction engineering, operations and mobility services firm. We create and operate intelligent infrastructure and buildings that both respond to the climate emergency and contribute to balanced, sustainable and resilient development. Our 20,500 employees operate across over 100 countries, deploying their expertise to develop and deliver cutting-edge innovations and solutions for clients. Through the wide range of our activities, we are central to the collective organization of society and the living environment of citizens all over the world.<br><br><br><br>Job Description<br><br>The Senior Electrical Engineer is responsible for providing oversight, coordination and construction supervision support for electrical works across AlUla infrastructure and development projects. The role ensures that electrical works are executed in accordance with approved designs, specifications, applicable Saudi regulations, authority requirements, international standards, project quality requirements, and approved construction programmes.<br><br>The position will work closely with the Resident Engineer, Project Manager, contractors, supervision consultants, designers, utility providers (SEC), authorities and other engineering disciplines to facilitate the successful delivery, testing, commissioning, and handover of electrical infrastructure.<br><br> <br><br>Key Roles & Responsibilities<br><br>Provide senior technical oversight of electrical works during the construction, testing, commissioning and handover stages. Sanity checks electrical drawings, specifications, method statements, material submissions, shop drawings, and technical proposals for compliance with project requirements. Monitor installation of electrical infrastructure including HV/MV/LV networks, substations, transformers, switchgear, distribution systems etc. Coordinate electrical works with civil, utilities, roads, architectural, mechanical, ICT and other project disciplines. Monitor site activities to ensure compliance with approved IFC drawings, specifications, approved materials, and relevant standards. Coordinate interfaces with Saudi Electricity Company (SEC) and other relevant utility providers and authorities as required. Support the Project Manager/Resident Engineer in facilitating technical and authority approvals necessary for construction. Monitor contractor progress against the approved programme and identify electrical activities that may affect project milestones or critical interfaces. Monitor testing and commissioning activities and verify that required inspections, tests and documentation are completed before handover. Review electrical snagging/punch-list items and monitor their closure. Support review of as-built drawings, O&M manuals, testing and commissioning records and final handover documentation. Maintain professional communication with the Client, contractors, consultants and relevant stakeholders. Perform other electrical engineering duties required for successful delivery of the assigned AlUla projects. <br><br><br>Qualifications<br><br>Bachelor’s degree in electrical engineering from a recognized university. Minimum 10 years of relevant professional experience, preferably involving major infrastructure, utilities, and development projects. Strong experience in electrical infrastructure including HV/MV/LV distribution, substations, transformers, street lighting, external networks and associated systems. Demonstrable experience working within PMC, PMCM, engineering consultancy or construction supervision environments. Previous experience on major infrastructure or multidisciplinary development programmes is highly desirable. Previous experience in Saudi Arabia and/or the GCC is required. Good knowledge of SEC requirements, Saudi Building Code and applicable Saudi authority requirements. Good knowledge of relevant international standards including IEC, IEEE, NFPA and BS standards, as applicable. Experience with testing, commissioning, and handover of electrical systems. Professional engineering registration or membership of a recognized engineering institution is preferred. Registration with the Saudi Council of Engineers (SCE), where applicable, is preferred.

<h3 >About Air Products and the Role</h3> <p >Air Products is seeking a <strong >DT Industrial Automation Senior Engineer</strong> to join its team in Duba, Tabuk, Saudi Arabia. This full-time role is integral to the NEOM Green Hydrogen program, a world-scale initiative where Air Products contributes to groundbreaking solutions. The company is known for its commitment to innovation, leveraging collective experience to drive progress in various sectors, including industrial production facilities.</p> <h3 >Role Context and Program Contribution</h3> <p >The Senior Engineer will represent DT Plant Computing engineering efforts directly on the NEOM Green Hydrogen program site in NEOM, KSA. This position requires close collaboration with Air Products Engineering centers located in the US and India. A key aspect of this role involves applying hands-on field experience during the active construction and project phases, prior to the operational start-up of the facilities.</p> <h3 >Key Responsibilities</h3> <ul > <li >Collaborate with Process Automation Engineers to build and deploy control systems for NEOM Green Hydrogen plant projects.</li> <li >Participate in Industrial Control System cybersecurity assessments and deployments.</li> <li >Configure and install PCs and Servers specifically for Process Control Applications.</li> <li >Troubleshoot issues identified during testing and DT activities throughout commissioning and start-up phases, focusing on Process Control PCs and Servers.</li> <li >Develop Zone &amp; Conduit Diagrams and Purdue Enterprise Reference Architecture models for Process Control Systems.</li> <li >Develop, design, configure, and deploy Plant Floor applications for various layers of protection for OT assets, including malware, antivirus, disaster recovery, safelisting, asset management, remote access, and intrusion detection.</li> <li >Work with vendors and ensure adherence to industry best practices for proper infrastructure support.</li> <li >Optimize work processes and implement automation to enhance service efficiency and productivity.</li> <li >Train, orient, and onboard new team members.</li> </ul> <h3 >Required Qualifications and Experience</h3> <p >Candidates for this role should possess <strong >5-10 years of relevant experience</strong> in industrial automation or a related field. The position requires a strong technical background and practical experience in the areas outlined in the responsibilities.</p> <h3 >Essential Skills and Attributes</h3> <ul > <li >Willingness to learn and develop security administration skillsets.</li> <li >Ability to manage multiple project priorities and competing demands effectively.</li> <li >Strong leadership and teamwork skills, coupled with the ability to work independently.</li> <li >Demonstrated creativity, results-orientation, focus, and attention to detail and accuracy.</li> <li >A sharp, quick, dedicated, and innovative approach to problem-solving.</li> <li >Ability to safely handle the physical demands of the position, including lifting up to 25 pounds, installing equipment in tight spaces, and pulling wire, cables, and running conduits as required.</li> </ul> <h3 >Work Environment and Commitment</h3> <p >This role is based at the project site location in NEOM, KSA, and requires a willingness to demonstrate technical leadership and project delivery from this base. The successful candidate will contribute to a critical program within a dynamic industrial environment.</p>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركة صحارى لخدمات الصيانة عن <strong >مهندس كهربائي</strong> للانضمام إلى فريقها في تبوك. يتولى شاغل هذا الدور مسؤولية إعداد التصاميم والمخططات الكهربائية لمختلف المشاريع والأعمال الهندسية، بالإضافة إلى متابعة تنفيذها وتشخيص الأعطال وإعداد برامج الصيانة الوقائية. هذا الدور بدوام كامل يتطلب خبرة تتراوح بين 0-1 سنة ويهدف إلى ضمان كفاءة وسلامة الأنظمة والمعدات الكهربائية.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >إعداد التصاميم والمخططات الكهربائية لمشاريع وأعمال الهندسة الكهربائية، ومتابعة مراحل تنفيذها لضمان الجودة والالتزام بالمواصفات.</li> <li >تطوير مخططات ومواصفات خطوط شبكات النقل والتوزيع الكهربائية، وتحديد مساراتها بدقة وكفاءة.</li> <li >إعداد برامج تشغيل الأنظمة والمعدات الكهربائية بما يتوافق مع متطلبات العمل والتشغيل.</li> <li >تشخيص أعطال الأجهزة والمعدات الكهربائية، ومتابعة إجراءات الإصلاح والصيانة لضمان استمرارية العمل.</li> <li >وضع برامج الصيانة الوقائية للأجهزة والمعدات والشبكات الكهربائية بناءً على توصيات الشركات المصنعة والتعليمات الفنية.</li> <li >المساهمة في تطوير أساليب وإجراءات العمل ومواكبة أحدث التطورات التقنية في مجال الهندسة الكهربائية.</li> <li >إعداد الوثائق والتقارير الفنية المتخصصة بنتائج الدراسات والتحاليل، وعرضها وتوضيحها وحفظها في قاعدة البيانات المعتمدة.</li> </ul> <h3 >المؤهلات والخبرات المطلوبة</h3> <ul > <li >شهادة جامعية في الهندسة الكهربائية أو مجال ذي صلة.</li> <li >خبرة عملية تتراوح من <strong >0 إلى 1 سنة</strong> في مجال الهندسة الكهربائية.</li> </ul> <h3 >المهارات والكفاءات</h3> <ul > <li >القدرة على إعداد التصاميم والمخططات الكهربائية باستخدام البرامج المتخصصة.</li> <li >مهارات تحليلية قوية لتشخيص الأعطال وتحديد الحلول المناسبة.</li> <li >القدرة على إعداد التقارير الفنية والوثائق المتخصصة بشكل واضح ودقيق.</li> <li >معرفة جيدة ببرامج تشغيل الأنظمة والمعدات الكهربائية.</li> <li >الالتزام بمعايير السلامة والجودة في جميع مراحل العمل.</li> <li >مهارات التواصل الفعال والقدرة على العمل ضمن فريق.</li> </ul> <h3 >تفاصيل الوظيفة</h3> <ul > <li >نوع العمل: دوام كامل.</li> <li >الموقع: تبوك، المملكة العربية السعودية.</li> <li >الراتب: لم يتم الإفصاح عنه.</li> </ul> <h3 >التقديم</h3> <p >ندعو المهتمين ممن تنطبق عليهم الشروط المذكورة أعلاه للتقديم لهذه الفرصة المهنية في شركة صحارى لخدمات الصيانة.</p></div>

The Operations Engineer will be responsible for monitoring and controlling the operation of all facility systems and coordinating maintenance-related activities at the Primary Nursery Facility in NEOM. The role will also oversee the delivery of support services, including Janitorial, Horticulture, Pest Control, Waste Management, and Office Services. The Operations Engineer will ensure the safe, efficient, and reliable operation of electro-mechanical systems, monitor service provider performance, ensure compliance with operational KPIs, resolve customer complaints, and continuously identify opportunities to improve facility performance, energy efficiency, and end-user satisfaction.<br>Key Responsibilities<br>Supervise and coordinate the daily operation of all MEP and electro-mechanical systems at the Primary Nursery Facility. Monitor and control equipment including MCCs, pumps, VFDs, fans, instrumentation, emergency generators, AHUs, chillers, and related systems. Plan operational activities, establish priorities, and coordinate maintenance and project-related works. Conduct regular inspections and monitor system performance to ensure facility readiness, reliability, and compliance with operational requirements. Analyze system performance, operating parameters, alarms, and set points, and implement corrective actions and improvement initiatives. Respond promptly to emergencies, major faults, equipment failures, and operational interruptions. Support Root Cause Analysis (RCA), incident investigations, commissioning activities, and the implementation of corrective actions. Manage and monitor contractors and service providers delivering Janitorial, Horticulture, Pest Control, Waste Management, and Office Services. Ensure customer satisfaction by resolving complaints, high-priority tickets, and recurring operational issues while monitoring service delivery against KPIs.<br><br>Requirements<br><br><br>Bachelor's degree in Electrical, Mechanical, Electro-Mechanical Engineering, or a related field. 4-6 years of experience in Facility Management, Facility Operations, or a similar role. Proven experience in the operation and monitoring of MEP and electro-mechanical systems. Good knowledge of facility systems and equipment, including MCCs, pumps, VFDs, generators, AHUs, chillers, fans, and instrumentation. Ability to read and interpret technical drawings and understand MEP commissioning procedures. Experience in contractor management, service provider coordination, and KPI monitoring. Strong knowledge of troubleshooting, problem-solving, Root Cause Analysis (RCA), and corrective action processes. Good communication, leadership, coordination, analytical, and customer service skills. Good command of written and spoken English, with the ability to work effectively under pressure and respond to operational emergencies.

We are Hiring!<br>We are looking for a skilled Mechanical Engineer specializing in Hospital Systems & Medical Gas Pipeline Systems (MGPS) to join our team. If you have strong experience in design review, healthcare mechanical infrastructure, and executing hospital projects, we want to hear from you.<br>Key Responsibilities:Design Review & Verification: Thoroughly review, evaluate, and verify mechanical design drawings, calculations, and specifications to ensure accuracy and compliance with healthcare standards before execution. Medical Gas Systems: Review and supervise the installation, testing, and compliance of Medical Gas Pipeline Systems (MGPS) in accordance with international healthcare codes (e.g., HTM 02-01, NFPA 99). Engineering & Site Supervision: Oversee mechanical works, including HVAC, plumbing, and fire protection systems tailored for hospital facilities. Quality & Compliance: Ensure all mechanical infrastructure meets strict infection control and healthcare environment standards (including cleanroom and isolation room ventilation). Coordination: Work closely with consultants, contractors, project managers, and hospital authorities to resolve design discrepancies and site queries.<br>Requirements & Qualifications:Education: Bachelor’s Degree in Mechanical Engineering. Experience: Proven experience in design review and site supervision for hospital/healthcare facility projects. Technical Knowledge: Deep understanding of Medical Gas Systems, healthcare HVAC standards, design verification, and international health facility codes. Skills: High attention to detail, strong engineering review capabilities, communication, and project coordination skills.

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br>Reimagine What’s Possible <br><br>NEOM Green Hydrogen Project is part of the most complex capital project and a flagship project at scale for Air Products. Air Products is executing a EPC Contract with the customer – NEOM Green Hydrogen Company (NGHC). Air Products have the responsibility to design, build and delivery Process Controls / Process Automation System and IT/Digital Technology infrastructure scope. This scope shall comply with the local laws and regulations on cybersecurity, which is a crucial part in the project’s safety, security and overall compliance.<br><br>The Cybersecurity Engineer – Renewable Power Sector is a senior technical competent individual contributor within the Project Cybersecurity Taskforce, responsible for assuring cybersecurity compliance, resilience, and safe operation of power generation and power transmission systems supporting large scale renewable energy assets (Solar PV, Wind Turbines, BESS, HV/MV substations, and grid interfaces).<br><br>The Engineer is also responsible for coordinating with Engineering, Pre-Commissioning, Commissioning and Client operations team related to Cyber Security field verifications.<br><br>The Cyber Security engineer acts as the technical interface between Air Products project execution, commissioning teams and the vendors, during the field verification of cyber assets.<br><br>Experience in supporting large scale construction, pre commissioning, commissioning, startup and handover phases, ensuring cybersecurity controls are implemented without impacting schedule critical activities<br><br>This position based out of Duba, Tabuk Region, Saudi Arabia working on rotation of 8 Weeks ON / 2 Weeks OFF.<br><br>The position will be a site-based role with below duties:<br><br>Perform field verification and validation of cybersecurity design and implementation for renewable power generation and transmission assets, ensuring compliance with Saudi and international standards. Assure cybersecurity controls for Solar PV plants, Wind Turbine systems, BESS, HV/MV substations, and grid interconnections, including PPC and EMS interfaces. Develop, maintain, and verify OT cybersecurity asset registers, network diagrams, zone‑conduit models, and risk registers for power systems. Lead and support cyber risk assessments for power packages and OEM skid systems; track and close mitigation actions with vendors and contractors. Support pre‑commissioning and commissioning by validating firewall rules, secure remote access, endpoint hardening, role‑based access control, logging, and monitoring prior to system energization. Oversee and participate in FAT, SAT, CSAT, and performance testing for substation automation systems, turbine control systems, and plant SCADA. Coordinate closely with subcontractors and OEMs to control third‑party access, remote connectivity, and cybersecurity compliance during construction and startup. Act as the technical cybersecurity interface between project execution, commissioning teams, OEMs, grid operators, and client representatives. Support change management to ensure cybersecurity impacts of design, procurement, installation, and commissioning changes are reviewed and approved. Contribute to OT cybersecurity handover to operations, including procedures, access governance, incident response alignment, backup, recovery, and secure remote support models<br><br>Minimum Requirements<br><br>Bachelor’s degree in engineering (electronics & communication, (or) instrumentation / process automation background is preferred) or equivalent. Minimum 10 to 15 years’ experience in Operational Technology (OT), or related field with at least 3 years focused on designing (or) building (or) validating the design/implementation of the cybersecurity for industrial control systems and networks. Project implementation experience of Saudi cyber standards HCIS, NCA, or ISA 62443 Industry standards, specifications, regulations, best practices. Strong knowledge and understanding of controls systems (SAS, SCADA/DCS/PLCs, etc.,) including Wind Turbine systems, relevant protocols (Modbus, PROFINET, DNP3, IEC61850, etc.), key technologies including Firewalls, IDS, Anti-Virus, Vulnerabilities assessments, etc. in the ICS/OT networks OT/ICS cybersecurity relevant accreditations such as ISA/IEC62443, SANS or other internationally recognized certifications are preferred. Advanced skills in Microsoft Office tools such as Teams, Share Point, Word, Excel, Power point and Visio etc.,Excellent communication skills and the ability to communicate appropriately at all levels of the organization; this includes written and verbal communications<br><br>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br>Reimagine What’s Possible <br><br>NEOM Green Hydrogen Project is part of the most complex capital project and a flagship project at scale for Air Products. Air Products is executing a EPC Contract with the customer – NEOM Green Hydrogen Company (NGHC). Air Products have the responsibility to design, build and delivery Process Controls / Process Automation System and IT/Digital Technology infrastructure scope. This scope shall comply with the local laws and regulations on cybersecurity, which is a crucial part in the project’s safety, security and overall compliance.<br><br>The Cybersecurity Engineer – Renewable Power Sector is a senior technical competent individual contributor within the Project Cybersecurity Taskforce, responsible for assuring cybersecurity compliance, resilience, and safe operation of power generation and power transmission systems supporting large scale renewable energy assets (Solar PV, Wind Turbines, BESS, HV/MV substations, and grid interfaces).<br><br>The Engineer is also responsible for coordinating with Engineering, Pre-Commissioning, Commissioning and Client operations team related to Cyber Security field verifications.<br><br>The Cyber Security engineer acts as the technical interface between Air Products project execution, commissioning teams and the vendors, during the field verification of cyber assets.<br><br>Experience in supporting large scale construction, pre commissioning, commissioning, startup and handover phases, ensuring cybersecurity controls are implemented without impacting schedule critical activities<br><br>This position based out of Duba, Tabuk Region, Saudi Arabia working on rotation of 8 Weeks ON / 2 Weeks OFF.<br><br>The position will be a site-based role with below duties:<br><br>Perform field verification and validation of cybersecurity design and implementation for renewable power generation and transmission assets, ensuring compliance with Saudi and international standards. Assure cybersecurity controls for Solar PV plants, Wind Turbine systems, BESS, HV/MV substations, and grid interconnections, including PPC and EMS interfaces. Develop, maintain, and verify OT cybersecurity asset registers, network diagrams, zone‑conduit models, and risk registers for power systems. Lead and support cyber risk assessments for power packages and OEM skid systems; track and close mitigation actions with vendors and contractors. Support pre‑commissioning and commissioning by validating firewall rules, secure remote access, endpoint hardening, role‑based access control, logging, and monitoring prior to system energization. Oversee and participate in FAT, SAT, CSAT, and performance testing for substation automation systems, turbine control systems, and plant SCADA. Coordinate closely with subcontractors and OEMs to control third‑party access, remote connectivity, and cybersecurity compliance during construction and startup. Act as the technical cybersecurity interface between project execution, commissioning teams, OEMs, grid operators, and client representatives. Support change management to ensure cybersecurity impacts of design, procurement, installation, and commissioning changes are reviewed and approved. Contribute to OT cybersecurity handover to operations, including procedures, access governance, incident response alignment, backup, recovery, and secure remote support models<br><br>Minimum Requirements<br><br>Bachelor’s degree in engineering (electronics & communication, (or) instrumentation / process automation background is preferred) or equivalent. Minimum 10 to 15 years’ experience in Operational Technology (OT), or related field with at least 3 years focused on designing (or) building (or) validating the design/implementation of the cybersecurity for industrial control systems and networks. Project implementation experience of Saudi cyber standards HCIS, NCA, or ISA 62443 Industry standards, specifications, regulations, best practices. Strong knowledge and understanding of controls systems (SAS, SCADA/DCS/PLCs, etc.,) including Wind Turbine systems, relevant protocols (Modbus, PROFINET, DNP3, IEC61850, etc.), key technologies including Firewalls, IDS, Anti-Virus, Vulnerabilities assessments, etc. in the ICS/OT networks OT/ICS cybersecurity relevant accreditations such as ISA/IEC62443, SANS or other internationally recognized certifications are preferred. Advanced skills in Microsoft Office tools such as Teams, Share Point, Word, Excel, Power point and Visio etc.,Excellent communication skills and the ability to communicate appropriately at all levels of the organization; this includes written and verbal communications<br><br>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br>Reimagine What’s Possible <br><br>NEOM Green Hydrogen Project is part of the most complex capital project and a flagship project at scale for Air Products. Air Products is executing a EPC Contract with the customer – NEOM Green Hydrogen Company (NGHC). Air Products have the responsibility to design, build and delivery Process Controls / Process Automation System and IT/Digital Technology infrastructure scope. This scope shall comply with the local laws and regulations on cybersecurity, which is a crucial part in the project’s safety, security and overall compliance.<br><br>The Cybersecurity Engineer – Renewable Power Sector is a senior technical competent individual contributor within the Project Cybersecurity Taskforce, responsible for assuring cybersecurity compliance, resilience, and safe operation of power generation and power transmission systems supporting large scale renewable energy assets (Solar PV, Wind Turbines, BESS, HV/MV substations, and grid interfaces).<br><br>The Engineer is also responsible for coordinating with Engineering, Pre-Commissioning, Commissioning and Client operations team related to Cyber Security field verifications.<br><br>The Cyber Security engineer acts as the technical interface between Air Products project execution, commissioning teams and the vendors, during the field verification of cyber assets.<br><br>Experience in supporting large scale construction, pre commissioning, commissioning, startup and handover phases, ensuring cybersecurity controls are implemented without impacting schedule critical activities<br><br>This position based out of Duba, Tabuk Region, Saudi Arabia working on rotation of 8 Weeks ON / 2 Weeks OFF.<br><br>The position will be a site-based role with below duties:<br><br>Perform field verification and validation of cybersecurity design and implementation for renewable power generation and transmission assets, ensuring compliance with Saudi and international standards. Assure cybersecurity controls for Solar PV plants, Wind Turbine systems, BESS, HV/MV substations, and grid interconnections, including PPC and EMS interfaces. Develop, maintain, and verify OT cybersecurity asset registers, network diagrams, zone‑conduit models, and risk registers for power systems. Lead and support cyber risk assessments for power packages and OEM skid systems; track and close mitigation actions with vendors and contractors. Support pre‑commissioning and commissioning by validating firewall rules, secure remote access, endpoint hardening, role‑based access control, logging, and monitoring prior to system energization. Oversee and participate in FAT, SAT, CSAT, and performance testing for substation automation systems, turbine control systems, and plant SCADA. Coordinate closely with subcontractors and OEMs to control third‑party access, remote connectivity, and cybersecurity compliance during construction and startup. Act as the technical cybersecurity interface between project execution, commissioning teams, OEMs, grid operators, and client representatives. Support change management to ensure cybersecurity impacts of design, procurement, installation, and commissioning changes are reviewed and approved. Contribute to OT cybersecurity handover to operations, including procedures, access governance, incident response alignment, backup, recovery, and secure remote support models<br><br>Minimum Requirements<br><br>Bachelor’s degree in engineering (electronics & communication, (or) instrumentation / process automation background is preferred) or equivalent. Minimum 10 to 15 years’ experience in Operational Technology (OT), or related field with at least 3 years focused on designing (or) building (or) validating the design/implementation of the cybersecurity for industrial control systems and networks. Project implementation experience of Saudi cyber standards HCIS, NCA, or ISA 62443 Industry standards, specifications, regulations, best practices. Strong knowledge and understanding of controls systems (SAS, SCADA/DCS/PLCs, etc.,) including Wind Turbine systems, relevant protocols (Modbus, PROFINET, DNP3, IEC61850, etc.), key technologies including Firewalls, IDS, Anti-Virus, Vulnerabilities assessments, etc. in the ICS/OT networks OT/ICS cybersecurity relevant accreditations such as ISA/IEC62443, SANS or other internationally recognized certifications are preferred. Advanced skills in Microsoft Office tools such as Teams, Share Point, Word, Excel, Power point and Visio etc.,Excellent communication skills and the ability to communicate appropriately at all levels of the organization; this includes written and verbal communications<br><br>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br>Reimagine What’s Possible <br><br>NEOM Green Hydrogen Project is part of the most complex capital project and a flagship project at scale for Air Products. Air Products is executing a EPC Contract with the customer – NEOM Green Hydrogen Company (NGHC). Air Products have the responsibility to design, build and delivery Process Controls / Process Automation System and IT/Digital Technology infrastructure scope. This scope shall comply with the local laws and regulations on cybersecurity, which is a crucial part in the project’s safety, security and overall compliance.<br><br>The Cybersecurity Engineer – Renewable Power Sector is a senior technical competent individual contributor within the Project Cybersecurity Taskforce, responsible for assuring cybersecurity compliance, resilience, and safe operation of power generation and power transmission systems supporting large scale renewable energy assets (Solar PV, Wind Turbines, BESS, HV/MV substations, and grid interfaces).<br><br>The Engineer is also responsible for coordinating with Engineering, Pre-Commissioning, Commissioning and Client operations team related to Cyber Security field verifications.<br><br>The Cyber Security engineer acts as the technical interface between Air Products project execution, commissioning teams and the vendors, during the field verification of cyber assets.<br><br>Experience in supporting large scale construction, pre commissioning, commissioning, startup and handover phases, ensuring cybersecurity controls are implemented without impacting schedule critical activities<br><br>This position based out of Duba, Tabuk Region, Saudi Arabia working on rotation of 8 Weeks ON / 2 Weeks OFF.<br><br>The position will be a site-based role with below duties:<br><br>Perform field verification and validation of cybersecurity design and implementation for renewable power generation and transmission assets, ensuring compliance with Saudi and international standards. Assure cybersecurity controls for Solar PV plants, Wind Turbine systems, BESS, HV/MV substations, and grid interconnections, including PPC and EMS interfaces. Develop, maintain, and verify OT cybersecurity asset registers, network diagrams, zone‑conduit models, and risk registers for power systems. Lead and support cyber risk assessments for power packages and OEM skid systems; track and close mitigation actions with vendors and contractors. Support pre‑commissioning and commissioning by validating firewall rules, secure remote access, endpoint hardening, role‑based access control, logging, and monitoring prior to system energization. Oversee and participate in FAT, SAT, CSAT, and performance testing for substation automation systems, turbine control systems, and plant SCADA. Coordinate closely with subcontractors and OEMs to control third‑party access, remote connectivity, and cybersecurity compliance during construction and startup. Act as the technical cybersecurity interface between project execution, commissioning teams, OEMs, grid operators, and client representatives. Support change management to ensure cybersecurity impacts of design, procurement, installation, and commissioning changes are reviewed and approved. Contribute to OT cybersecurity handover to operations, including procedures, access governance, incident response alignment, backup, recovery, and secure remote support models<br><br>Minimum Requirements<br><br>Bachelor’s degree in engineering (electronics & communication, (or) instrumentation / process automation background is preferred) or equivalent. Minimum 10 to 15 years’ experience in Operational Technology (OT), or related field with at least 3 years focused on designing (or) building (or) validating the design/implementation of the cybersecurity for industrial control systems and networks. Project implementation experience of Saudi cyber standards HCIS, NCA, or ISA 62443 Industry standards, specifications, regulations, best practices. Strong knowledge and understanding of controls systems (SAS, SCADA/DCS/PLCs, etc.,) including Wind Turbine systems, relevant protocols (Modbus, PROFINET, DNP3, IEC61850, etc.), key technologies including Firewalls, IDS, Anti-Virus, Vulnerabilities assessments, etc. in the ICS/OT networks OT/ICS cybersecurity relevant accreditations such as ISA/IEC62443, SANS or other internationally recognized certifications are preferred. Advanced skills in Microsoft Office tools such as Teams, Share Point, Word, Excel, Power point and Visio etc.,Excellent communication skills and the ability to communicate appropriately at all levels of the organization; this includes written and verbal communications<br><br>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br>Reimagine What’s Possible <br><br>NEOM Green Hydrogen Project is part of the most complex capital project and a flagship project at scale for Air Products. Air Products is executing a EPC Contract with the customer – NEOM Green Hydrogen Company (NGHC). Air Products have the responsibility to design, build and delivery Process Controls / Process Automation System and IT/Digital Technology infrastructure scope. This scope shall comply with the local laws and regulations on cybersecurity, which is a crucial part in the project’s safety, security and overall compliance.<br><br>The incumbent in this position based at project site, as ICS Cyber Security Engineer, plays a key member of a Cybersecurity task force team to undertake the field verification of the cyber assets to comply with the project specifications and the site acceptance criteria.<br><br>The Engineer is also responsible for coordinating with Engineering, Pre-Commissioning, Commissioning and Client operations team related to Cyber Security field verifications.<br><br>The Cyber Security engineer acts as the technical interface between Air Products project execution, commissioning teams and the vendors, during the field verification of cyber assets.<br><br>Experience in supporting large scale construction, pre commissioning, commissioning, startup and handover phases, ensuring cybersecurity controls are implemented without impacting schedule critical activities<br><br>The position is based out of Duba, Tabuk Region, Saudi Arabia working on rotation of 8 Weeks ON / 2 Weeks OFF.<br><br>The position will be a site-based role with the below duties:<br><br>Perform the field verification of the design, implementation and testing of the cyber assets to meet the cybersecurity standards, regulatory requirements and technologies, processes/procedures and specifications to transition the project assets to commissioning, start-up and final handover to the client. Develop, document, and maintain cybersecurity asset register and other key deliverables as guided by the Site Cybersecurity Lead or Cybersecurity Manager. Organize and lead/facilitate the resolution and implementation of the cybersecurity risk assessment exercises and implement risk assessment recommendations for Air Products design and also for vendor/ skid package control system Support pre‑commissioning and commissioning teams by validating firewall rules, secure remote access, endpoint hardening, Asset inventory validation, Access control execution, and logging before system energization. Lead and oversee architecture, standards and FAT/SAT/CSAT procedures development, execution and performance testing. Ensure the verification and approval of the 3rd party device access needs as requested by the subcontractor and vendors as part of the commissioning and start-up requirements on the vendor packages. Participate in technical coordination meetings with cross-functional teams as guided by the Site Cybersecurity lead. Coordinate with vendors and Air Products engineering team to resolve and liquidate the punch points identified during the field verification of the cyber assets. Coordinate and assist the Site Cybersecurity Lead with the change management activities to ensure design, procurement, installation, commissioning, and startup of cybersecurity scope are reviewed for schedule, and budget compliance. Prepare weekly updates and dashboard to the Site cybersecurity lead and the Project Cybersecurity Collaboration Lead. Identify and escalate risks and opportunities, Collect and report lessons learned during vendor site visits and project execution. Support OT cybersecurity handovers to operations, including procedures, asset inventories, access management, and incident response alignment. Contribute to OT Cybersecurity Operations Model, including monitoring, patching, backup, disaster recovery, and secure remote support.<br><br>Minimum Requirements<br><br>Bachelor’s degree in engineering (electronics & communication, (or) instrumentation / process automation background is preferred) or equivalent. Minimum 10 to 15 years’ experience in Operational Technology (OT), or related field with at least 3 years focused on designing (or) building (or) validating the design/implementation of the cybersecurity for industrial control systems and networks. Project implementation experience of Saudi cyber standards HCIS, NCA, CRA compliance, ISA 62443 Industry standards, specifications, regulations, best practices. Strong knowledge and understanding of controls systems (SCADA/DCS/PLCs, etc.,), relevant protocols (Modbus, PROFINET, DNP3, IEC61850, etc.), key technologies including Firewalls, IDS, Anti-Virus, Vulnerabilities assessments, etc. in the ICS/OT networks OT/ICS cybersecurity relevant accreditations such as ISA/IEC62443, SANS or other internationally recognized certifications are preferred. Additional cybersecurity certifications such as CISSP, CISM, ISO 27001, etc., will be an added advantage Advanced skills in Microsoft Office tools such as Teams, Share Point, Word, Excel, Power point and Visio etc.,Excellent communication skills and the ability to communicate appropriately at all levels of the organization; this includes written and verbal communications<br><br>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br>Reimagine What’s Possible <br><br>NEOM Green Hydrogen Project is part of the most complex capital project and a flagship project at scale for Air Products. Air Products is executing a EPC Contract with the customer – NEOM Green Hydrogen Company (NGHC). Air Products have the responsibility to design, build and delivery Process Controls / Process Automation System and IT/Digital Technology infrastructure scope. This scope shall comply with the local laws and regulations on cybersecurity, which is a crucial part in the project’s safety, security and overall compliance.<br><br>The incumbent in this position based at project site, as ICS Cyber Security Engineer, plays a key member of a Cybersecurity task force team to undertake the field verification of the cyber assets to comply with the project specifications and the site acceptance criteria.<br><br>The Engineer is also responsible for coordinating with Engineering, Pre-Commissioning, Commissioning and Client operations team related to Cyber Security field verifications.<br><br>The Cyber Security engineer acts as the technical interface between Air Products project execution, commissioning teams and the vendors, during the field verification of cyber assets.<br><br>Experience in supporting large scale construction, pre commissioning, commissioning, startup and handover phases, ensuring cybersecurity controls are implemented without impacting schedule critical activities<br><br>The position is based out of Duba, Tabuk Region, Saudi Arabia working on rotation of 8 Weeks ON / 2 Weeks OFF.<br><br>The position will be a site-based role with the below duties:<br><br>Perform the field verification of the design, implementation and testing of the cyber assets to meet the cybersecurity standards, regulatory requirements and technologies, processes/procedures and specifications to transition the project assets to commissioning, start-up and final handover to the client. Develop, document, and maintain cybersecurity asset register and other key deliverables as guided by the Site Cybersecurity Lead or Cybersecurity Manager. Organize and lead/facilitate the resolution and implementation of the cybersecurity risk assessment exercises and implement risk assessment recommendations for Air Products design and also for vendor/ skid package control system Support pre‑commissioning and commissioning teams by validating firewall rules, secure remote access, endpoint hardening, Asset inventory validation, Access control execution, and logging before system energization. Lead and oversee architecture, standards and FAT/SAT/CSAT procedures development, execution and performance testing. Ensure the verification and approval of the 3rd party device access needs as requested by the subcontractor and vendors as part of the commissioning and start-up requirements on the vendor packages. Participate in technical coordination meetings with cross-functional teams as guided by the Site Cybersecurity lead. Coordinate with vendors and Air Products engineering team to resolve and liquidate the punch points identified during the field verification of the cyber assets. Coordinate and assist the Site Cybersecurity Lead with the change management activities to ensure design, procurement, installation, commissioning, and startup of cybersecurity scope are reviewed for schedule, and budget compliance. Prepare weekly updates and dashboard to the Site cybersecurity lead and the Project Cybersecurity Collaboration Lead. Identify and escalate risks and opportunities, Collect and report lessons learned during vendor site visits and project execution. Support OT cybersecurity handovers to operations, including procedures, asset inventories, access management, and incident response alignment. Contribute to OT Cybersecurity Operations Model, including monitoring, patching, backup, disaster recovery, and secure remote support.<br><br>Minimum Requirements<br><br>Bachelor’s degree in engineering (electronics & communication, (or) instrumentation / process automation background is preferred) or equivalent. Minimum 10 to 15 years’ experience in Operational Technology (OT), or related field with at least 3 years focused on designing (or) building (or) validating the design/implementation of the cybersecurity for industrial control systems and networks. Project implementation experience of Saudi cyber standards HCIS, NCA, CRA compliance, ISA 62443 Industry standards, specifications, regulations, best practices. Strong knowledge and understanding of controls systems (SCADA/DCS/PLCs, etc.,), relevant protocols (Modbus, PROFINET, DNP3, IEC61850, etc.), key technologies including Firewalls, IDS, Anti-Virus, Vulnerabilities assessments, etc. in the ICS/OT networks OT/ICS cybersecurity relevant accreditations such as ISA/IEC62443, SANS or other internationally recognized certifications are preferred. Additional cybersecurity certifications such as CISSP, CISM, ISO 27001, etc., will be an added advantage Advanced skills in Microsoft Office tools such as Teams, Share Point, Word, Excel, Power point and Visio etc.,Excellent communication skills and the ability to communicate appropriately at all levels of the organization; this includes written and verbal communications<br><br>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.

Overview The HSE Engineer is responsible for developing, implementing, and monitoring health, safety, and environmental (HSE) policies and procedures on construction sites in Amaala, Saudi Arabia. This role requires full physical presence on-site in Amaala to ensure compliance with regulations and promotes a culture of safety among all team members.<br>Responsibilities:HSE Policy Development:Create and update HSE policies and procedures to align with industry standards and regulations. Conduct risk assessments and develop mitigation strategies. Training and Awareness:Conduct HSE training sessions for all site personnel to promote safety awareness. Ensure that new employees receive proper HSE orientation. Site Inspections:Maintain continuous on-site presence in Amaala to perform regular site inspections to identify hazards and ensure compliance with HSE standards. Document findings and recommend corrective actions. Incident Investigation:Lead investigations of accidents and incidents to identify root causes. Prepare reports and present findings to management with recommendations for improvement. Regulatory Compliance:Stay updated on local and national HSE regulations and ensure compliance across all projects. Liaise with regulatory bodies during inspections and audits. Reporting and Documentation:Maintain accurate records of HSE activities, incidents, and training. Prepare and submit regular HSE reports to the Projects Director.<br>Key Responsibilities & KPIs:Incident Rate: Reduction in the number of workplace incidents. Compliance Rate: Percentage of compliance with HSE regulations during inspections. Training Participation: Number of employees trained and their feedback. Risk Assessment Completion: Timeliness and thoroughness of risk assessments conducted. HSE Audit Results: Outcomes of internal and external HSE audits. Interfaces Regulatory Authorities: Interface during inspections and compliance checks. Consultants: Work with external HSE consultants as needed for assessments and improvement.<br>Qualifications:Location Requirement: Must be located in or willing to relocate to Amaala, Saudi Arabia. Education: Bachelor’s degree in Environmental Science, Safety Engineering, or a related field. Experience: 3-5 years of experience in HSE management, preferably in construction. Certifications: NEBOSH, IOSH, or equivalent HSE certification.<br>Skills:Strong analytical and problem-solving skills. Excellent communication and training abilities. In-depth knowledge of HSE regulations and best practices. Proficiency in HSE management software and reporting tools.

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br>Reimagine What’s Possible <br><br>Job Title: EPMS Engineer<br><br>Job Purpose<br><br>The EPMS Engineer is responsible for driving the resolution and closeout of all outstanding EPMS-related technical, functional, integration, testing, and commissioning issues. The role involves coordinating with engineering contractors, vendors, commissioning teams, operations personnel, and project stakeholders to ensure the EPMS is fully functional, compliant with project requirements, and ready for final handover.<br><br>Key Responsibilities<br><br>Issue Management and Closeout<br><br>Review, prioritize, and manage all EPMS punch list items and outstanding actions. Maintain a comprehensive EPMS issue tracker with owners, target dates, and status updates. Investigate technical issues, determine root causes, and coordinate corrective actions. Verify that all identified issues are resolved and formally closed.<br><br>Technical Support<br><br>Provide technical expertise on EPMS architecture, hardware, software, networking, and system integration. Review configuration settings, alarms, events, reports, dashboards, and monitoring functions. Support troubleshooting of communication issues between EPMS, SCADA, DCS, PLCs, protection relays, meters, and other integrated systems. Validate system performance against project specifications and operational requirements.<br><br>Testing and Verification<br><br>Develop and execute test procedures for issue verification and closeout. Witness and document retesting activities following corrective actions. Ensure all functional, integration, and reliability tests are successfully completed. Support SAT, commissioning, and performance testing activities.<br><br>Vendor and Contractor Coordination<br><br>Interface with EPMS suppliers, system integrators, OEMs, and EPC contractors. Monitor vendor action items and ensure timely resolution of defects. Review and approve technical submissions, software revisions, and configuration changes. Facilitate technical meetings to drive issue resolution.<br><br>Documentation and Handover<br><br>Ensure all as-built documentation is complete and accurate. Review operating procedures, maintenance manuals, and user guides. Verify closure of all comments from FAT, SAT, commissioning, and operational readiness reviews. Support final handover to operations and maintenance teams.<br><br>Reporting<br><br>Provide regular status reports on outstanding issues, risks, and mitigation plans. Highlight critical path items affecting project completion. Escalate unresolved technical issues to project management when required.<br><br>Qualifications<br><br>Education<br><br>Bachelor's Degree in Electrical Engineering, Power Systems Engineering, or a related discipline.<br><br>Experience<br><br>5–10+ years of experience in electrical power systems, SCADA, EMS, or EPMS projects. Experience with commissioning and troubleshooting electrical monitoring and control systems. Proven track record in managing punch lists and closeout activities during project execution.<br><br>Technical Skills<br><br>Knowledge of power system monitoring, protection, and control systems. Familiarity with communication protocols such as Modbus, IEC 61850, DNP3, OPC, and Ethernet networks. Experience with electrical substations, switchgear, protection relays, energy meters, and power management systems. Understanding of FAT, SAT, commissioning, and handover processes. Ability to analyze system logs, alarms, events, and performance data.<br><br>Soft Skills<br><br>Strong problem-solving and troubleshooting abilities. Excellent coordination and stakeholder management skills. Strong written and verbal communication. Ability to manage multiple issues and priorities in a fast-paced project environment.<br><br>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.