Computer Technician Jobs - Jeddah Saudi

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>perform maintenance on auto vehicles such as oil, fluid and tire changes, wheel balancing &amp; assist our more experienced auto mechanics with more complicated repairs Responsibilities Raise vehicles, using hydraulic jacks. Operate cranes, hoists, or other moving or lifting equipment. Remount wheels onto vehicles. Unbolt and remove wheels from vehicles, using lug wrenches or other hand or power tools. Remove parts or components from vehicles. Place wheels on balancing machines to determine counterweights required to balance wheels. Test mechanical equipment to ensure proper functioning. Identify tire size and ply and inflate tires accordingly. Replace valve stems and remove puncturing objects. Hammer required counterweights onto rims of wheels. Assemble mechanical components or machine parts. Seal punctures in tubeless tires by inserting adhesive material and expanding rubber plugs into punctures, using hand tools. Reassemble tires onto wheels. Reassemble equipment after repair Inspect tire casings for defects, such as holes or tears. Inspect mechanical components of vehicles to identify problems. Locate punctures in tubeless tires by visual inspection or by immersing inflated tires in water baths and observing air bubbles. Inspect mechanical components of vehicles to identify problems. Glue tire patches over ruptures in tire casings, using rubber cement. Assist mechanics and perform various mechanical duties, such as changing oil or checking and replacing batteries. Rotate tires to different positions on vehicles, using hand tools. Install vehicle parts or accessories Clean and tidy up the shop. Buff defective areas of inner tubes, using scrapers. Smooth surfaces of objects or equipment Order replacements for tires or tubes. Order materials, supplies, or equipment . Prepare rims and wheel drums for reassembly by scraping, grinding, or sandblasting. Apply rubber cement to buffed tire casings prior to vulcanization process. Separate tubed tires from wheels, using rubber mallets and metal bars or mechanical tire changers. Disassemble equipment for maintenance or repair. Inspect mechanical components of vehicles to identify problems. Place tire casings and tread rubber assemblies in tire molds for the vulcanization process and exert pressure to ensure good adhesion. Drive automobile or service trucks to industrial sites to provide services or respond to emergency calls. Drive trucks or other vehicles to or at work sites Clean sides of whitewall tires Clean equipment, parts, or tools to repair or maintain them in good working order . Qualification vocational diploma or equivalent. Required Experiences 2 years Minimum Requirements mechanical aptitude and skill set in car maintenance Ability to perform day-to-day physical tasks Competencies Accountability Adaptability Collaboration Communication Results Orientation Emotional Intelligence </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Candidate Profile</strong></p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures using hand tools and power tools. Inspect and diagnose malfunctioning tools, equipment, electrical systems, apparatus, and components. Connect wires to circuit breakers, transformers, or other components. Use testing devices such as ohmmeters, voltmeters, and oscilloscopes. Test batteries in generators, emergency lighting, etc. Plan layout and installation of electrical wiring, equipment, and fixtures, based on job specifications and current National Electric Code and local codes. Read and follow blueprints/schematics. Respond to repair requests and perform preventative maintenance on tools and equipment, and appliances. Maintain maintenance inventory and requisition parts and supplies. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Maintain confidentiality of proprietary information and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Develop and maintain positive working relationships with others and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language and prepare and review information in a variety of formats accurately and completely. Move, lift, carry, push, pull, and place objects weighing less than or equal to 10 pounds without assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Perform other reasonable job duties as requested by Supervisors.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education: Technical, Trade, or Vocational School Degree. Related Work Experience: At least 2 years of related work experience. Supervisory Experience: No supervisory experience. REQUIRED QUALIFICATIONS License or Certification: Valid Driver s License</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Date Posted: 2026-06-29 Work location Jeddah, Saudi Arabia. Responsibilities to Anticipate: Diagnoses and troubleshoot faults Use Depot Test Equipment (DTE) Enforce safety regulations and procedures Provide technical assistance and support when needed Analyze Circuit Card Assemblies (CCAs) and power supplies Read engineering documents and electronic circuit diagrams</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma in Electronics from an accredited foreign or local college or institute Must be a Saudi national 8 years prior experience in troubleshooting, fault isolation, repair, and final inspection of defense systems Experience in soldering, splicing, and wiring is preferred Knowledge in reading and understanding engineering documents, and electronic circuit diagrams General knowledge of maintenance workshop procedure</p><p></p></section>

<p>Maintains service operations by inspecting and maintaining vehicles. Main duties include using tools to find any potential issues with someone s vehicle, explains problems with the car to the driver and performing maintenance on the car to fix it or prevent it from future breakdowns or issues.</p><p>Ensure that the job card is issued with details of the repair work to be carried out. Ensures that protective covers are used in all vehicles before carrying out any repairs. Should maintain accurate time recording (clocking on and off) for all repairs. Perform brakes, suspension, tire installation, scheduled maintenance, and all manner of automotive repairs and maintenance that you are qualified to perform Secure our guest's approval to perform the work because of the diagnosis, and always maintain a clean, neat work area Complete thorough automotive vehicle inspections on every vehicle you service, and perform any repairs and maintenance Test drive guest vehicles and use our shop truck in a safe manner to pick up inventory as needed Repair brake and steering systems. Diagnose and repair electrical and electronic systems. Replace or repair transmissions and fuel components as needed. Repair cooling components and the system, including air conditioners and engine cooling. Perform emissions inspections, safety checks, and similar state-regulated vehicle examinations. Maintain a clean, safe working environment. Produce legible and accurate paperwork reflecting work performed. Identify problems with vehicles using the diagnostic equipment. Explain automotive repairs and issues, and provide great customer service. Perform basic auto care and maintenance tasks such as oil changes, fluid level checks, and tire rotation. Repair and replace brake pads, wheel bearings, sensors, and other parts. Perform routine maintenance and general mechanic work on vehicles.</p><p><strong>Desired Candidate Profile</strong></p><p>KeyRequirements Ensure that the job card is issued with details of the repair work to be carried out. Ensures that protective covers are used in all vehicles before carrying out any repairs. Should maintain accurate time recording (clocking on and off) for all repairs. Perform brakes, suspension, tire installation, scheduled maintenance, and all manner of automotive repairs and maintenance that you are qualified to perform Secure our guest's approval to perform the work because of the diagnosis, and always maintain a clean, neat work area Complete thorough automotive vehicle inspections on every vehicle you service, and perform any repairs and maintenance Test drive guest vehicles and use our shop truck in a safe manner to pick up inventory as needed Repair brake and steering systems. Diagnose and repair electrical and electronic systems. Replace or repair transmissions and fuel components as needed. Repair cooling components and the system, including air conditioners and engine cooling. Perform emissions inspections, safety checks, and similar state-regulated vehicle examinations. Maintain a clean, safe working environment. Produce legible and accurate paperwork reflecting work performed. Identify problems with vehicles using the diagnostic equipment. Explain automotive repairs and issues, and provide great customer service. Perform basic auto care and maintenance tasks such as oil changes, fluid level checks, and tire rotation. Repair and replace brake pads, wheel bearings, sensors, and other parts. Perform routine maintenance and general mechanic work on vehicles. Prepared to get additional certification as needed. Willingness to learn with hands-on training. Help keep the repair shop clean and organized. Keep a professional appearance.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Inspect client sites to identify pest types, sources, and the conditions that attract them.</p></li><li><p>Recommend and apply the appropriate IPM treatment — chemical and non-chemical — tailored to each site.</p></li><li><p>Prepare and apply pesticides strictly per label directions and HSE safety procedures.</p></li><li><p>Adjust chemical mixtures and dosages to the size of the area and the severity of the infestation.</p></li><li><p>Advise clients on prevention, sanitation, and follow-up measures.</p></li><li><p>Respond promptly and professionally to service requests and callbacks.</p></li><li><p>Complete accurate service reports and documentation after each job.</p></li><li><p>Maintain equipment, vehicle, and PPE; ensure safe storage and transport of chemicals.</p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Must have</strong></p><ul><li><p>High school diploma or above.</p></li><li><p>Physically able to work outdoors in all conditions — lifting equipment, using ladders, and accessing tight or confined spaces.</p></li><li><p>Strong attention to detail and a safety-first mindset.</p></li><li><p>Good communication and customer-service skills (Arabic and/or English).</p></li></ul><p><strong>Preferred</strong></p><ol><li><p>Proven pest control / IPM experience.</p></li><li><p>Familiarity with pesticide safety standards and relevant certifications (or willingness to obtain them).</p></li></ol><p>3.Knowledge of common urban and stored-product pests.<br>4.Valid Saudi driver's license (daily travel to client sites).</p><p></p></section>

Technical Draftsman – Shop Drawings (Marble & Interior Finishing)???? Riyadh, Saudi Arabia | Full-Time | On-Site<br>About Dar Almasalla Dar Almasalla is a Saudi company specializing in marble fabrication, custom marble works, sanitary solutions, and interior finishing projects. Our work combines technical accuracy, modern production methods, and skilled craftsmanship to deliver high-quality residential and commercial projects.<br>Role Overview We are looking for a Technical Draftsman to join our technical team in Riyadh. The role is primarily responsible for preparing accurate shop drawings, fabrication drawings, and technical details for marble, stone, and interior finishing works based on architectural drawings, site measurements, approved designs, and project requirements. The ideal candidate should have strong Auto CAD skills, good technical understanding, and the ability to convert design concepts and site information into clear drawings suitable for production and installation.<br>Key Responsibilities Prepare detailed shop drawings based on architectural drawings, design drawings, and project specifications. Prepare fabrication and production drawings for marble, granite, natural stone, and related finishing works. Develop plans, elevations, sections, details, and enlarged technical drawings as required. Prepare accurate dimensions, joint locations, edge details, openings, cut-outs, and installation details. Convert approved designs and site measurements into production-ready drawings. Review architectural and structural drawings and identify discrepancies before production. Coordinate drawings with site conditions, sanitary fixtures, plumbing points, electrical requirements, and other related works. Revise shop drawings based on consultant, client, site, or internal technical comments. Coordinate with estimation, production, site, design, and project teams. Prepare cutting details, piece identification, and production information when required. Ensure drawings are technically accurate and practical for fabrication and installation. Maintain proper drawing revisions, records, and document control. Support the production team by clarifying drawing details and resolving technical issues when required.<br>Qualifications Diploma or Bachelor's degree in Civil Engineering, Architecture, Drafting, or a related technical field. Proven experience preparing shop drawings and technical drawings. Strong proficiency in Auto CAD is required. Strong ability to read and interpret architectural and technical drawings. Good understanding of dimensions, sections, elevations, construction details, and installation requirements. High attention to detail and dimensional accuracy. Ability to coordinate between drawings, site conditions, and production requirements. Good organizational skills and ability to manage multiple drawings and revisions. Ability to communicate effectively with technical, production, and site teams. Experience with marble, granite, natural stone, interior finishing, fit-out, kitchens, sanitary works, or similar industries is highly preferred. Experience working in Saudi Arabia or the GCC is an advantage. Knowledge of Sketch Up, Revit, or other drafting/design software is an advantage.

Technical Manager – Major Roads PMCM<br>International Engineering Consultancy is seeking expressions of interest from experienced Technical Managers for a major roads PMCM project in Saudi Arabia.<br>Requirements:Bachelor’s degree in Civil Engineering or a related engineering discipline. Minimum 15 years of overall professional experience. Minimum 10 years of relevant experience in technical management, engineering management, design coordination, or multidisciplinary engineering delivery for major road, highway, or transportation infrastructure projects. Strong experience leading and coordinating multidisciplinary engineering teams across civil, roads, structures, utilities, drainage, electrical, mechanical, ITS, and other infrastructure disciplines. Proven experience reviewing engineering designs, technical submissions, method statements, shop drawings, technical queries, value engineering proposals, and compliance with project specifications and applicable standards. Strong ability to manage technical interfaces, resolve multidisciplinary engineering issues, coordinate with designers, contractors, consultants, and stakeholders, and support construction delivery. Previous experience in major road/highway projects under consultancy, supervision, PMC, or PMCM environments is highly desirable. Candidates who do not meet the minimum experience requirements above may not be considered for this position.<br>Interested candidates may send their updated CV to amohammad@ayesa.com, clearly mentioning “Technical Manager” in the subject line.

Koenig Solutions is looking for an experienced Corporate Trainer / Instructor – Project & Portfolio Management with 8–15 years of industry experience and a PgMP and/or PfMP certified to deliver world-class training programs for professionals preparing for PMI certifications. <br>Key Responsibilities:Design, develop, and deliver instructor-led training programs for PgMP and PfMP certifications. Deliver training through virtual, classroom, and blended learning modes. Develop courseware, presentations, case studies, labs, mock exams, and assessments aligned with PMI standards. Continuously update training content based on PMI changes and industry trends. Stay updated with PMI standards and project/program/portfolio management best practices.<br>Required Qualification & Skills:PgMP and/or PfMP certification is mandatory.8–15 years of experience in Program, Portfolio, or Project Management / PMO leadership. Experience delivering corporate training or mentoring professionals. Strong understanding of Program Management, Portfolio Management, Governance, Benefits Realization, Risk & Stakeholder Management, Strategic Alignment, and PMI standards.<br>Apply or refer someone:Send your resume to Ishita. Gupta@koenig-solutions.com

Electrical buildings foundation, finishing, and maintenance; everything related to the field of electricity is available in Jeddah.

Syarah is on a mission to change how people buy their cars in Saudi and the Middle East. We offer buyers an end-to-end digital car buying experience where they can buy their next car from the comfort of their living rooms. Under the hood, we build systems to manage sourcing of cars, inspection, photography, merchandising, reconditioning, financing, insurance, shipping and many more. Our goal is to turn car buying into an experience of delight, comfort and peace of mind.<br><br>We are on the lookout for ambitious, competitive, growth-minded professionals to help us continue to harness technology to delight our customers and achieve our ambitious growth objectives in the auto sector.<br><br>Requirements<br><br>Uses diagnostic equipment as an aid in locating vehicle defects Has experience in road testing vehicles and determining the faults Coordinates the activities of subordinates Inspects work performed by Automotive technicians Leading technical skills and personality traits<br><br>Education & Skills:<br><br>BA or diploma in auto mechanic or any related field5+ year experience in automotive industry/ 2 years minimum as a team leader/supervisor Has experience in leading technicians at least for 2 years Leadership skills Hands on Technical experience in automotive industry

Requirements5–10 years of experience in the industrial field. Willingness to join immediately after successfully passing the interview. For Saudi nationals: A valid Saudi Council of Engineers (SCE) accreditation/certificate is required. Salary starts from SAR 9,000–10,000. to Applysend your CV to: career@mtech-ksa.com

POSITION OBJECTIVE The position is responsible for monitoring and maintenance of the Building Management System and Heating, Ventilation & Air Conditioning System under the direction of the Project Manager or Control Engineer.<br><br>Key Responsibilities<br><br> Resolve technical problems and investigate elevated issues by confirming the validity of the problem. Basic Knowledge of AC, Electrical, Plumbing & Fire Alarm system particularly of busy commercial Building & Warehouse. Knowledge and experience in BMS panel & field device termination work. Experience in involving BMS testing & commissioning activities. Coordinate with MEP staff & 3rd party for all kind of maintenance activities. Able to read BMS drawings based on pipe, duct, containment and all other MEP site installation. Conducts frequent site verification if required. Recommends changes for improvement in the system, methods and procedures. Understand and instruct team for adhering local safety regulation.

Responsibilities: Assist in the installation, calibration, maintenance, and repair of instrumentation equipment, including sensors, flow meters, pressure gauges, and level transmitters. Support the operation, monitoring, and troubleshooting of SCADA systems to ensure seamless communication and control of lift station processes. Perform regular inspections and basic troubleshooting of control panels and PLCs under the supervision of senior technicians. Monitor data from SCADA systems to identify anomalies and report issues to the operations team. Assist in configuring and maintaining communication networks for SCADA systems, including wired and wireless components. Support senior technicians in performing preventive and corrective maintenance on instrumentation and SCADA hardware and software. Maintain accurate records of calibration, repair activities, and system performance. Follow safety protocols and ensure compliance with regulatory standards for instrumentation and SCADA operations. Participate in training programs to develop technical skills in instrumentation and SCADA systems.<br>Qualifications:Diploma or certification in Instrumentation, Electrical Engineering, or a related field (BSc is a plus). Basic understanding of instrumentation systems, including sensors, transmitters, and actuators. Familiarity with SCADA systems, PLCs, and HMI (Human-Machine Interface) software. Knowledge of communication protocols such as Modbus, Profibus, or Ethernet is an advantage. Eagerness to learn and grow in the field of instrumentation and SCADA technology. Strong communication and teamwork skills, with the ability to follow instructions effectively. Basic understanding of safety protocols and compliance requirements for instrumentation and SCADA systems. Analytical mindset and problem-solving skills for diagnosing and resolving system issues. Experience with technical documentation and report preparation is a plus.

Hairstylist <br>Job Description<br>We are looking for a skilled and experienced Hairstylist who can provide a full range of professional hair services.<br>Responsibilities<br>Perform all hair coloring services, including highlights, full color, and root color. Create a variety of hairstyles and hair looks. Perform haircuts according to clients’ preferences. Provide professional blow-dry, wavy, and straight hairstyles. Perform hot and cold hair treatments. Maintain high standards of hair care and service quality. Maintain a clean and hygienic working environment.<br>Qualifications<br>Minimum 2 years of professional salon experience. Strong knowledge of hair coloring, cutting, styling, and treatments. Excellent hygiene and cleanliness standards. Professional, friendly, and well-presented. Good communication and client-service skills. Strong product knowledge and ability to recommend and sell suitable hair-care products to clients. Confident sales and upselling skills. Able to work efficiently in a professional salon environment.

About the job :Tamheer program is an on-the-job training program for Saudi graduates. Tamheer aims at training Saudi graduate holders at international organizations and outstanding companies in order for them to gain experience and skills to prepare them for full time employment. We are intended for graduates who have bachelor's degree, and that have not been employed during the last six months.<br>We are ( CARE ) looking for fresh graduates for Tamheer opportunity for medical Departments.<br>Minimum Requirements:To be eligible to apply, you must meet the below criteria:Should have a bachelor's degree or above. Should not have been employed or registered in GOSI for the last six months. Should not have previously participated in the Tamheer program.<br>Skills :Strong academic results. Good command of the English, Arabic language. Good experience MS Office tools (Power Point, Excel, Word) Good Communication Skills.

Role:The candidate will Perform preventive and corrective maintenance on diesel and gasoline engines. Dismantle, inspect, repair, and reassemble engines and generators and related components. Troubleshoot starting, charging, overheating, low-power, vibration, and abnormal-noise problems. The candidate will Perform engine servicing, including oil and filter changes, belt replacement, coolant servicing, and fuel system maintenance. Follow manufacturer specifications, maintenance schedules, and overhaul procedures. Inspect engines, generators, cooling systems, fuel systems, batteries, and electrical components. Diagnose mechanical, electrical, and fuel-system faults using appropriate testing and diagnostic equipment. Conduct generator testing, load-bank testing, and operational checks where required. Maintain accurate records of inspections, repairs, maintenance activities, and spare parts used. Maintain workshop tools, equipment, and work areas in safe and clean condition.<br>Qualifications:Diploma in Mechanical Engineering or a related technical field. Minimum 3 years working experience as Car Mechanic. Excellent knowledge of vehicle mechanical system and components. Ability to read and understand technical manuals and repair instructions. Ability to diagnose and troubleshoot mechanical tools. Very Good understanding of mechanical tools and using automotive diagnostic. Proficiency in Microsoft Office. Proficiency in English, spoken and written.

Company Description<br>Secure Tech is a system integration company in Riyadh, Saudi Arabia, specializing in security systems and technical solutions. Our commitment is to provide the best service and equipment in the technological and security fields, adhering to international standards. Our team of qualified professionals strives for development and improvement for a better future in Saudi Arabia.<br>Key Responsibilities<br>Installation & Commissioning: Install road blockers, hydraulic power packs, and control units to precise manufacturing tolerances. System Troubleshooting: Diagnose and repair hydraulic leaks, cylinder failures, faulty sensors, and electrical control panels. Preventive Maintenance: Conduct routine checks on hydraulic fluid levels, valves, pumps, and moving parts to prevent equipment downtime. Access Control Integration: Wire and integrate road blocker systems with Automatic Doors Road Blockers and Barriers, gate barriers, loop detectors, and CCTV networks. Emergency Response: Perform emergency overrides and system resets, particularly on emergency fast operation (EFO) systems.<br>Core Requirements<br>Technical Qualifications: Diploma in Electrical, Mechanical, or Electro-Mechanical Engineering. Experience: 2–5 years of hands-on experience working with hydraulic systems, PLC controls, and low-voltage security barriers. Skills: Ability to read schematics, use multimeters, and operate heavy lifting/trenching equipment.

Job Title: Rolling Stock Maintenance Professional – Lines 4&6Location: Riyadh, Saudi Arabia Nationality Requirement: Open to Saudis only<br>About the Role:In this hands-on role, you will be responsible for executing preventive and corrective maintenance on a fleet of 50 driverless metro trains, ensuring high availability, safety, and service reliability. You will report directly to the Rolling Stock Leader and work collaboratively across multidisciplinary teams.<br>Key Responsibilities:Perform daily, routine, and emergency maintenance tasks (both planned and unplanned). Diagnose and resolve technical failures across various metro subsystems. Strictly adhere to all safety protocols, method statements, and permit-to-work procedures. Ensure rapid onsite intervention to recover trains and restore service with minimal disruption. Maintain transparent reporting and support continuous improvement initiatives.<br>Candidate Requirements:Nationality: Saudis only. Education: Diploma or higher in Engineering (Mechanical, Electrical, or a related field). Experience: Minimum 2 years of relevant experience in rolling stock, railway, or heavy equipment maintenance. Technical Knowledge: Familiarity with metro/railway systems, mechanical, and electrical components. Key Competencies: Strong problem-solving skills, planning ability, and a sense of urgency. Soft Skills: Team player with clear reporting skills and professionalism in a multicultural environment.

Qualifications Education: Bachelor’s degree holder in engineering or any related field. Experience: 0-1 Year experience in HSE, preferably within the FMCG industry. Certification: HSE Practitioner Certificate. Skills: Knowledge of ISO 45001 auditing, hygiene and Food Safety Standards, GxP internal audits, HSE Standards. Language: English and Arabic.<br><br>Position Summary The incumbent holds the responsibility to create a safe working environment in all buildings and sites of BCR in close collaboration with the HSE team.<br>Key Responsibilities Support the implementation and continuous improvement of Health, Safety, and Environment (HSE) programs across the organization. Promote compliance with HSE policies, procedures, and applicable regulatory requirements. Conduct workplace inspections and identify potential health and safety risks, supporting corrective and preventive actions. Participate in internal audits and risk assessments related to HSE, GMP, and other quality systems. Support the maintenance of ISO 45001 and other relevant management system requirements. Assist in delivering HSE awareness and safety training programs to employees. Monitor and report HSE performance, incidents, near misses, and safety observations, ensuring accurate documentation. Collaborate with cross-functional teams to promote a strong safety culture and drive continuous improvement initiatives. Support compliance with company policies, occupational health and safety standards, and environmental regulations. Perform other HSE-related duties as assigned.

Key Responsibilities Perform preventive, predictive, and corrective maintenance on instrumentation and control systems. Troubleshoot, diagnose, and repair faults in PLC, SCADA, HMI, RTU, VFD, and field instrumentation systems. Calibrate, test, install, and commission field instruments, including pressure, flow, level, temperature, and analytical instruments. Ensure the reliable and efficient operation of automation and control systems in wastewater treatment plants (WWTPs), pumping stations, and lift stations. Monitor control system performance and identify opportunities to improve system reliability and reduce downtime. Read and interpret P&IDs, electrical drawings, loop diagrams, control logic, and technical documentation to perform maintenance activities. Conduct routine inspections and functional testing of instrumentation and control equipment. Maintain accurate maintenance records, calibration certificates, and work reports in the computerized maintenance management system (CMMS). Coordinate with operations and maintenance teams to plan and execute maintenance activities with minimal disruption to plant operations. Assist in the installation, modification, and upgrading of instrumentation and control systems. Ensure compliance with company policies, safety procedures, and applicable industry standards during all maintenance activities. Support emergency breakdown response and participate in on-call maintenance activities when required. Identify spare parts requirements and report equipment defects or recurring failures to supervisors. Participate in system testing, commissioning, and performance verification following maintenance or project activities. Maintain housekeeping standards and ensure tools, instruments, and test equipment are properly maintained and calibrated.