Automotive Engineer Jobs in Saudi

Job Description Field Service Engineer – Commercial Vehicles & Trucks Job Purpose To provide technical and field service support for commercial vehicles and trucks by diagnosing and resolving complex technical issues at customer sites, workshops, and vehicle locations. The Field Service Engineer will support service operations, ensure effective troubleshooting and repairs, and act as a technical link between the company, workshops, customers, and the manufacturer. Key Responsibilities Provide on-site technical support for commercial vehicles, trucks, and other assigned vehicles. Diagnose and troubleshoot complex mechanical, electrical, electronic, and drivability issues. Conduct field inspections and technical investigations for vehicle complaints and failures. Support workshops and technicians in identifying the root cause of technical problems. Attend breakdowns and critical technical cases when required. Analyze vehicle symptoms, diagnostic trouble codes (DTCs), test results, and repair history. Use diagnostic tools and equipment to perform accurate vehicle diagnosis. Provide technical guidance and repair recommendations to workshop technicians. Support the resolution of repeated and difficult-to-diagnose vehicle failures. Perform technical inspections before and after major repairs. Conduct road tests and functional tests when required. Prepare detailed technical reports for major failures, repeated complaints, and field cases. Document findings, root causes, troubleshooting steps, and corrective actions. Coordinate with the Warranty team regarding technical findings and warranty-related cases. Support warranty investigations by providing technical evidence and failure analysis. Escalate complex or unresolved technical cases to the manufacturer and follow up until resolution. Review and implement manufacturer Technical Service Bulletins (TSBs), Service Campaigns, Recalls, and technical instructions. Support workshops during new model introductions and major technical issues. Provide technical training and on-the-job guidance to technicians when required. Monitor recurring technical issues and identify trends across the vehicle fleet. Provide feedback to the manufacturer regarding recurring failures and product quality concerns. Support the development and improvement of repair procedures and troubleshooting methods. Ensure all field activities are completed safely and according to company and manufacturer standards. Maintain accurate records of field visits, technical cases, repairs, and recommendations. Required Technical Experience The candidate must have strong hands-on experience in commercial vehicles and trucks, including:Diesel engines and diesel engine management systems. Commercial vehicles and heavy-duty trucks. Diesel fuel injection and fuel systems. Engine cooling, lubrication, and air intake systems. Manual and automated/automatic transmissions. Differential, driveline, and 4WD systems where applicable. Brake systems, including air brake systems. Steering and suspension systems. Vehicle electrical and electronic systems. CAN Bus and vehicle communication systems. Automotive diagnostic scanners and OEM diagnostic software. Troubleshooting of mechanical, electrical, and electronic vehicle failures. Qualifications & Experience Bachelor's degree or Diploma in Automotive Engineering, Mechanical Engineering, Electrical Engineering, or Automotive Technology. Minimum 5 years of relevant experience in automotive technical support, field service, dealership, fleet, or commercial vehicle operations. Mandatory experience with commercial vehicles, trucks, and diesel engines. Experience working with heavy-duty or commercial vehicle manufacturers is highly preferred. Strong practical experience in vehicle diagnosis and troubleshooting. Experience supporting workshops and technicians. Experience dealing with customers and technical complaints is preferred. Valid Saudi driving license is required. Willingness to travel extensively within Saudi Arabia. Core Competencies Strong technical and diagnostic skills. Excellent troubleshooting and root-cause analysis capability. Strong knowledge of diesel engines and commercial vehicles. Ability to analyze complex technical problems and develop practical solutions. Strong communication and interpersonal skills. Ability to work independently in the field. Ability to work under pressure and manage multiple technical cases. Good technical reporting skills. Customer-oriented approach. Strong coordination and follow-up skills. Safety and quality focused. Key Performance Indicators (KPIs) Field cases resolved within the required turnaround time. First-time-right technical resolution rate. Reduction in repeat technical failures. Technical case closure time. Workshop technical support response time. Accuracy and quality of technical reports. Reduction in vehicle downtime. Successful resolution of escalated technical cases. Technician technical support and training effectiveness. Customer technical complaint resolution rate.

<p>Handle vehicle inspections throughout the car journey and support the Cars Operations team with day-to-day operational tasks.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Good knowledge and experience in car inspection</li><li>Able to inspect vehicle body, exterior, interior, and overall condition</li><li>Good automotive knowledge</li><li>Arabic communication skills</li><li>Attention to detail and ability to identify vehicle issues accurately</li><li>Flexible and willing to support other operational tasks</li></ul>

<p>Jasara Program Management Company (Jasara PMC) is a leading Joint Venture between Public Investment Fund (PIF), Jacobs, and Saudi Aramco, established to deliver world-class program management services across the Kingdom of Saudi Arabia. Jasara plays a key role in supporting the realization of Saudi Vision 2030, particularly in delivering giga-projects and large-scale infrastructure developments. We are seeking a Director for Roads and Car Parks to join JASARA PMC. The Director Roads and Car Parks serves as the Subject Matter Expert (SME) responsible for the strategic planning, assurance, governance, performance monitoring, operational readiness, asset management, and lifecycle optimization of roads, tunnels, and car park infrastructure. The role provides technical leadership and oversight across the full asset lifecycle, ensuring infrastructure assets are safe, reliable, sustainable, compliant, and aligned with organizational objectives and industry best practices. Key Responsibilities Strategic Leadership Develop and implement the long-term strategy for roads, tunnels, and car park assets. Establish asset management frameworks, standards, policies, and procedures aligned with international best practices. Support executive leadership in defining infrastructure investment priorities and capital planning strategies. Act as the technical authority and SME for all roads, tunnels, and parking-related infrastructure matters. Asset Management and Lifecycle Planning Lead asset lifecycle management activities including planning, design review, operation, maintenance, renewal, and replacement strategies. Develop and maintain asset management plans, asset condition assessments, and long-term investment programs. Ensure infrastructure assets achieve required levels of service while optimizing whole-life costs. Oversee asset criticality assessments and risk-based maintenance approaches. Assurance and Governance Lead Stage Gate Assurance reviews for roads, tunnels, and car park projects. Review project deliverables and provide technical recommendations for Go/No-Go decisions. Ensure compliance with organizational governance requirements, industry standards, and regulatory obligations. Conduct technical audits, performance reviews, and assurance assessments. Design and Technical Oversight Review and approve engineering designs, specifications, standards, and technical submissions. Ensure designs meet operational, safety, sustainability, accessibility, and maintainability requirements. Evaluate innovative technologies, smart mobility solutions, and industry developments. Provide expert technical guidance on road geometry, pavement systems, tunnel systems, drainage, parking facilities, traffic management, and associated infrastructure. Operations and Maintenance Monitor operational performance of road, tunnel, and parking assets. Ensure maintenance strategies are effectively implemented to maximize asset performance and reliability. Drive continuous improvement initiatives to increase efficiency and service levels. Support operational readiness and transition from project delivery to operations. Risk Management and Compliance Identify infrastructure risks and develop mitigation strategies. Ensure compliance with local regulations, international standards, and health and safety requirements. Oversee emergency response, resilience planning, and business continuity considerations for critical infrastructure. Monitor environmental and sustainability performance requirements. Stakeholder Management Collaborate with internal and external stakeholders, including project teams, operators, consultants, contractors, regulators, and government authorities. Represent the organization in technical committees and industry forums. Provide executive-level reporting and technical advice to senior leadership. Performance Monitoring Develop and monitor KPIs related to asset performance, condition, availability, reliability, and lifecycle costs. Establish reporting dashboards and performance review processes. Ensure data-driven decision-making through asset intelligence and performance analytics. Key Accountabilities Roads, tunnels, and car park asset performance. Asset lifecycle and maintenance strategies. Technical governance and assurance. Infrastructure risk management. Operational readiness and transition assurance. Asset management compliance and maturity. Capital investment and renewal planning. Service level achievement and optimization.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Civil Engineering or related discipline.</li><li>Master's degree in Engineering, Infrastructure Management, Asset Management, or a related field preferred.</li><li>Professional Certifications (Preferred): Chartered Engineer (CEng), PE, or equivalent. Certified Asset Management Assessor (CAMA). IAM Certificate/Diploma or equivalent Asset Management qualification. PMP, PRINCE2, or equivalent project management certification. Relevant transportation, tunnel, or infrastructure certifications.</li><li>20+ years of experience in transportation, infrastructure, roads, tunnels, or parking asset management.</li><li>Minimum 8 years in a senior leadership or management role.</li><li>Proven experience in large-scale infrastructure programs, smart cities, municipalities, giga projects, or transportation authorities.</li><li>Strong background in asset management, operations, maintenance, and infrastructure lifecycle planning.</li><li>Experience leading technical assurance and stage-gate reviews.</li></ul>

Location: Madinah / Kingdom of Saudi Arabia Division: Anti termite Treatment, Waterproofing, Insulation and Concrete Treatment<br>Indigo Builders, Madinah is looking for a Technical Business Development / Sales Engineer to develop business opportunities in Anti termite Treatment, Waterproofing, Insulation and Concrete Treatment and related specialized construction services. The selected candidate will be responsible for generating new leads, developing relationships with contractors, consultants, developers and facility-management companies. Conducting site visits, understanding client requirements, preparing quotations and following opportunities through to award and collection.<br>Key Responsibilities -Generate new business leads and identify project opportunities -Visit contractors, consultants, developers and project sites- Conduct initial site surveys and understand technical requirements- Prepare quotations, proposals and technical/commercial offers- Follow up RFQs, tenders and submitted quotations- Build and maintain strong client relationships- Coordinate with the technical and execution teams- Maintain a database of prospects, projects and follow-ups- Support vendor registrations and prequalification submissions- Achieve monthly sales and business-development targets<br>Candidate Profile- Civil Engineering or relevant technical qualification preferred- 5+ years of experience in Saudi Arabia construction market preferred- Minimum 5 years of marketing/sales experience within the construction industry- Experience in Anti termite Treatment, Waterproofing, Insulation and Concrete Treatment is an advantage- Good knowledge of BOQs, drawings and quotations- Strong communication, negotiation and presentation skills- Must be fluent in Arabic (spoken and written)- Existing relationships with contractors, consultants or developers will be a major advantage- Valid Saudi driving license required; candidate must have a personal vehicle (car and fuel allowance provided)<br>Compensation SAR 4,500 – 5,000 basic salary (depending on experience) plus performance-based sales commission.

<p>Position Details</p><p>Position: Facility &amp; Maintenance Engineer Location: Saudi Arabia Experience: 5 10 Years Employment Type: Full-Time Department: Operations / Engineering</p><p>Key Responsibilities</p><p>Manage day-to-day maintenance of the manufacturing facility, infrastructure and utilities.</p><p>Handle preventive, predictive and breakdown maintenance of CNC machines and production equipment.</p><p>Troubleshoot mechanical, electrical, hydraulic and pneumatic systems.</p><p>Manage maintenance of CNC turning, milling and other machining equipment.</p><p>Coordinate with OEMs and external service providers for technical support and major breakdowns.</p><p>Manage electrical systems, DG sets, compressed air, HVAC, water systems, fire &amp; safety systems and other plant utilities.</p><p>Develop preventive maintenance schedules and maintain equipment/breakdown records.</p><p>Manage critical maintenance spares, inventory and procurement requirements.</p><p>Ensure compliance with HSE, LOTO, permit-to-work and statutory requirements.</p><p>Coordinate with vendors and contractors, including AMC activities and service contracts.</p><p>Support machine installation, commissioning and facility readiness for the new JV operation.</p><p>Establish maintenance SOPs, checklists, preventive maintenance systems and critical-spares inventory.</p><p><strong>Desired Candidate Profile</strong></p><p>We are particularly looking for candidates with a combination of:</p><p>CNC Machine Maintenance + Facility/Utilities Management + Greenfield/Plant Commissioning Experience</p><p>Candidates from Oil &amp; Gas, Precision Engineering, CNC Machining, Aerospace &amp; Defence, Heavy Engineering, Automotive, Industrial Manufacturing or Machine Tool industries would be preferred.</p><p>Educational Qualification</p><p>Bachelor's Degree / Diploma in Mechanical, Electrical or Mechatronics Engineering .</p>

<h3 >About Lucid Motors Middle East</h3> <p >At <strong >Lucid Motors Middle East</strong>, we focus on creating mobility experiences through innovation, leveraging proprietary technology and a software-defined vehicle architecture. Our approach involves deep vertical integration, with design, engineering, and production managed in-house across our global offices and manufacturing facilities. We aim to redefine possibilities in the automotive market by combining performance, sustainability, design, and engineering.</p> <h3 >The Role of Process Engineer</h3> <p >Lucid Motors Middle East is seeking a <strong >Process Engineer</strong> to join our team in Riyadh, Saudi Arabia. This full-time role is responsible for developing, implementing, and optimizing technical and operational processes across various aftersales functions, including service centers, body repair centers (LABRC), mobile service operations, PDI, and service parts activities. The Process Engineer supports the Aftersales Program Manager by providing engineering analysis, process design, validation, and continuous improvement initiatives to ensure efficient, scalable, and high-quality aftersales operations aligned with Lucid engineering standards. This position is suitable for candidates with 0-1 years of experience.</p> <h3 >Key Responsibilities</h3> <ul > <li >Design, standardize, and document end-to-end service processes covering diagnosis, repair workflows, quality checks, and turnaround time (TAT).</li> <li >Analyze repair cycle times and throughput to improve operational efficiency and reduce customer wait times.</li> <li >Develop and optimize processes related to PDI, warranty repairs, and workshop operations in alignment with Lucid engineering standards.</li> <li >Create PFMEAs, control plans, SOPs, and work instructions for aftersales processes using Lucid’s Process Engineering methodologies.</li> <li >Provide data analysis, process insights, and engineering inputs to support program planning and execution for aftersales initiatives.</li> <li >Support cross-functional initiatives, including service readiness, new service program launches, and field quality improvements, participating in reviews with Engineering, Quality, Parts Operations, Logistics, LABRC, and Field Support teams.</li> <li >Partner with Field Quality Engineers to analyze failure trends and develop corrective process actions, supporting root cause analysis and containment activities using methodologies such as 8D and Six Sigma.</li> <li >Translate engineering solutions and design changes into practical service center workflows and procedures.</li> <li >Improve parts ordering, availability, and parts-to-repair workflows in collaboration with Parts Operations and Supply Chain teams, identifying fulfillment bottlenecks and designing process improvements.</li> <li >Analyze service operational data, including First Time Through (FTT), Turnaround Time (TAT), repeat repairs, quality flags, and parts usage.</li> <li >Develop dashboards and performance reports to support KPI tracking and decision-making, and map process gaps within DMS, ERP, and technical information portals.</li> <li >Apply Lean principles to eliminate waste, improve technician utilization, and optimize workshop layout and flow, conducting onsite time studies and capacity assessments.</li> <li >Ensure all process improvements align with Lucid’s global standards for safety, quality, and operational excellence.</li> </ul> <h3 >Required Qualifications</h3> <ul > <li >0-1 years of experience in process engineering, automotive service operations, aftersales engineering, or manufacturing environments.</li> <li >Strong hands-on experience with Lean, Six Sigma, 8D, and other process improvement methodologies.</li> <li >Experience analyzing service KPIs and working across engineering, quality, logistics, and service teams.</li> </ul> <h3 >Preferred Experience</h3> <ul > <li >Exposure to EV aftersales operations and service environments.</li> <li >Experience with service parts operations, warranty processes, or body repair centers.</li> <li >Experience leading process standardization across multi-location operations.</li> <li >Knowledge of BIW, high voltage systems, or EV repair processes.</li> </ul> <h3 >Compensation and Work Type</h3> <p >This is a full-time position based in Riyadh, Saudi Arabia. Compensation for this role includes a discretionary cash incentive and participation in an equity program.</p>

<p>We're looking for a creative and enthusiastic Automotive Content Creator to join our team. You'll be responsible for creating engaging content from our car showroom, showcasing vehicles across TikTok and Snapchat while helping grow our online presence.</p><p><b>Key Responsibilities:</b></p><ul><li>Create engaging TikTok content showcasing our vehicles.</li><li>Capture daily Snapchat content from the showroom during working hours.</li><li>Present and showcase vehicles confidently on camera.</li><li>Create creative automotive content aligned with social media trends.</li><li>Engage with followers across social media.</li><li>Collaborate with the marketing team to execute the content plan</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Passion for cars and the automotive industry.</li><li>Confident and comfortable speaking on camera.</li><li>Experience creating content for TikTok and Snapchat.</li><li>Basic video editing skills (CapCut or similar).</li><li>Creative, energetic, and up to date with social media trends.</li><li>Available to work on-site at the showroom on a part-time basis.</li></ul><p>We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.</p>

<p>Syarah is on a mission to transform the way people buy cars in Saudi Arabia and the Middle East. We offer customers an end-to-end digital car buying experience, allowing them to purchase their next vehicle from the comfort of their homes. Behind the scenes, we build and operate systems that manage vehicle sourcing, inspection, photography, merchandising, reconditioning, financing, insurance, shipping, and much more. Our goal is to make car buying a seamless, transparent, and enjoyable experience.</p><p>We are seeking an experienced and highly organized Used Cars Refurbishment Manager to lead our vehicle reconditioning department. In this role, you will manage the entire lifecycle of pre-owned vehicles from the moment they are acquired until they hit the sales floor. Your primary goal is to oversee mechanical repairs, bodywork, and detailing while balancing quick turnaround times, strict quality standards, and budget constraints.</p><h3>Key Responsibilities</h3><p>Operations &amp; Turnaround Management</p><ul><li>Streamline the end-to-end reconditioning process to meet target turnaround times (e.g., frontline ready within 3 5 days).</li><li>Coordinate workflow between mechanical, body shop, and detailing teams.</li><li>Manage sublet repairs and maintain strong relationships with outside vendors for specialized work.</li></ul><p>Quality Assurance &amp; Compliance</p><ul><li>Implement rigorous multi-point inspection and quality control processes.</li><li>Ensure all refurbished vehicles meet state safety regulations and dealership brand standards.</li><li>Conduct final test drives and cosmetic sign-offs before releasing vehicles to inventory.</li></ul><p>Financial &amp; Inventory Control</p><ul><li>Manage the monthly refurbishment budget and track cost-per-vehicle metrics.</li><li>Review and approve all repair estimates, parts orders, and vendor invoices.</li><li>Monitor shop supply inventory and order parts efficiently to minimize vehicle downtime.</li></ul><p>Team Leadership &amp; Safety</p><ul><li>Recruit, train, schedule, and supervise technicians, detailers, and support staff.</li><li>Set clear performance goals and conduct regular evaluations.</li><li>Enforce safety regulations, environmental guidelines, and shop safety policies.</li></ul><p><strong>Desired Candidate Profile</strong></p><h3>Experience:</h3><p>3+ years of experience in automotive reconditioning management, service advising, or service shop management.</p><h3>Technical Knowledge:</h3><p>Deep understanding of automotive mechanics, collision repair, and detailing techniques.</p><h3>Leadership:</h3><p>Proven ability to manage, motivate, and hold a diverse team accountable.</p><h3>Software Skills:</h3><p>Proficiency with dealership management systems (DMS) and inventory tracking tools.</p>

<p>The Welding Engineer is responsible for planning, controlling, supervising and providing technical support for all welding activities associated with fabrication, construction, installation, maintenance and repair works. The Welding Engineer shall ensure that welding activities are carried out in accordance with approved WPS/PQR/WPQ, project specifications, applicable international codes, client requirements and quality standards . The position requires strong knowledge of welding processes, welding metallurgy, materials, welding consumables, welding procedures, NDT, PWHT and welding quality control.</p><p>Role &amp; responsibilities</p><ul><li>Prepare, review and qualify Welding Procedure Specifications (WPS) .</li><li>Prepare and review Procedure Qualification Records (PQR) .</li><li>Develop welding procedures based on project specifications and applicable codes.</li><li>Witness and coordinate welding procedure qualification tests and welding parameters.</li><li>Review mechanical test and NDT results associated with procedure qualification.</li><li>Maintain approved welding procedure records.</li><li>Plan and coordinate welder qualification tests.</li><li>Review Welder Performance Qualification (WPQ/WQT) records.</li><li>Ensure welders are qualified for the applicable welding process, material, thickness, position and joint configuration.</li><li>Maintain welder qualification and performance records.</li><li>Monitor welder performance and productivity.</li><li>Identify welders requiring requalification or additional training.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>WPS / PQR / WPQ preparation and qualification ASME IX, ASME VIII, ASME B31.3, API 1104, AWS D1.1 SMAW, GTAW/TIG, GMAW/MIG, FCAW &amp; SAW Welding parameters: current, voltage, heat input, travel speed Preheat &amp; interpass temperature control PWHT requirements and chart interpretation Welding consumable selection, storage &amp; control Welding metallurgy: CS, SS, alloy steel, duplex Weld defect identification &amp; root-cause analysis NDT coordination RT, UT, MT, PT Weld repair procedures &amp; distortion control Material/MTC and filler-metal compatibility Weld documentation, traceability &amp; NCR/CAR Client/project specifications and Oil &amp; Gas EPC experience</p><p>Job Title: Welding Engineer Experience: 510 years Education: B.E./B.Tech Mechanical / Metallurgical / Welding Engineering Industry: Oil &amp; Gas / Petrochemical / Refinery / EPC Gulf Experience: Preferred Key Codes: ASME IX, ASME VIII, ASME B31.3, API 1104, AWS D1.1 Key Documents: WPS, PQR, WPQ, Weld Map, ITP, NCR, NDT &amp; PWHT Records Preferred Certification: IWE/EWE / CSWIP / AWS</p>

???? HIRING: Technical Sales Engineer — Industrial Pumps & Fluid Control???? Saudi Arabia | Field-Based | Full-Time<br>SAWAB Industrial is growing and we're looking for a technically sharp sales engineer to join our team.<br>We sell premium Italian and American industrial equipment — AODD pumps and chemical feed accessories — to water treatment facilities, industrial plants, EPC contractors, and food processing operations across Saudi Arabia.<br>━━━━━━━━━━━━━━━━━━━━━━━━WHAT YOU'LL DO━━━━━━━━━━━━━━━━━━━━━━━━▶ Develop new customers across industrial sectors in Saudi Arabia▶ Provide technical consultation on pump selection and system design▶ Visit plants and present to procurement managers and engineers▶ Prepare technical quotations and complete system proposals▶ Manage full sales cycle from prospecting to closing<br>━━━━━━━━━━━━━━━━━━━━━━━━WHAT WE'RE LOOKING FOR━━━━━━━━━━━━━━━━━━━━━━━━✦ Engineering degree (Mechanical, Chemical, or related)✦ 3–7 years in industrial equipment sales OR plant maintenance✦ Fluent Arabic and English✦ Genuine technical curiosity and consultative approach✦ Comfortable visiting industrial plants and construction sites✦ Self-motivated, organized, and able to manage territory independently✦ Valid Saudi driving license, willing to travel to industrial sites<br>Bonus if you have: Experience with pumps/valves, water treatment or chemical plant background, or existing relationships with industrial procurement contacts in Saudi Arabia.<br>━━━━━━━━━━━━━━━━━━━━━━━━WHAT WE OFFER━━━━━━━━━━━━━━━━━━━━━━━━???? Competitive base salary + commission???? Car allowance + fuel for field work???? Mobile phone and laptop provided???? Early opportunity in a growing industrial e-commerce platform???? Health insurance + standard Saudi labor benefits<br>━━━━━━━━━━━━━━━━━━━━━━━━TO APPLY━━━━━━━━━━━━━━━━━━━━━━━━Send your CV to: info@sawab.appSubject: Technical Sales Engineer<br>Or message me directly here on Linked In.<br>#Hiring #Technical Sales #Saudi Arabia #Industrial Equipment #Pumps #Chemical Engineering #Mechanical Engineering #Sales Engineer #Water Treatment #Petrochemical #KSA

Senior Quality Engineer (Saudi Nationals Only)<br>Responsibilities:<br>FUNCTIONAL RESPONSIBILITIES<br>Adheres to company Quality Management System policies and procedures. Establishes and maintains necessary quality reports for Quality Manager and Project Manager. Plans and conducts project internal audits and functional & department audits and oversees follow-up and close-out of audit findings. Reviews the implementation of design control activities on engineering design packages prior to submittal to clients or third parties. Conducts the quality control plan, audit, measurement and analysis activities for Engineering packages and advice correction. Raises and monitors non-conformities and corrective action reports on projects. Follows-up and verifies closing of audit observations, NCRs and CARs. Performs root cause analysis as required. Provides quality reports to the Quality Manager and Project Manager as required. Performs other duties assigned by Quality Supervisor/Manager.<br>AUTHORITY/LEADERSHIP RESPONSIBILITIES<br>Reports to Quality Supervisor or Quality Manager. Provides guidance to quality engineers. Leads design package reviews. Leads audit functions.<br>Requirements:<br>BS Engineering with 10 years of significant experience in engineering and/or construction, of which 5 years in Building, Constriction, Infrastructure industry. Has experience in quality system auditing with Lead Auditor Certificate for ISO 9001 latest edition. Must have good knowledge of quality assurance/quality control methods, practices, international codes and standards, and procedures. Analytical skills. Report writing skills. Team player. Excellent communication skills.

<h3 >About the Role</h3> <p >*********** is seeking a dedicated <strong >Sourcing Inspector/Car Buyer</strong> to join its team in Dammam. This full-time role is central to the car acquisition process, involving direct interaction with sellers and comprehensive vehicle assessment. Candidates should possess 2-5 years of relevant experience.</p> <h3 >Company Overview</h3> <p >***********, operating under the Kayishha brand, provides a modern, secure, and convenient platform for selling cars across the Arab world. The company offers complimentary car valuation services for all makes and models, professional inspections, and a rapid car buying process. This service aims to be an efficient alternative to traditional, time-consuming selling methods, also facilitating free car deregistration, part-exchange, and the settlement of bank loans or mortgages. The goal is to deliver a fast, easy, and fair car buying experience, alongside opportunities for professional growth and development.</p> <h3 >Key Responsibilities</h3> <ul > <li >Welcome and engage with sellers in a professional and courteous manner to establish positive initial rapport.</li> <li >Guide sellers through the necessary check-in, waiting, and deal area procedures.</li> <li >Perform thorough vehicle inspections safely and professionally.</li> <li >Accurately complete inspection reports within specified timeframes, adhering to SAC Quality Standards for both picture and vehicle inspection.</li> <li >Identify key seller motivations using structured qualifying questions and relay this critical information to the closer.</li> <li >Support the Closer in finalizing deals by employing appropriate trial closing, negotiation, perceived value enhancement, and objection handling techniques.</li> <li >Prepare all required documentation for accepted offers and ensure its complete and accurate transfer, along with the vehicle, to the Operations Team.</li> <li >Ensure all prospective sellers, regardless of offer acceptance, are professionally and courteously dismissed to uphold a positive company image and encourage future referrals.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of <strong >2 to 5 years of experience</strong> in a relevant field, such as automotive sales, vehicle inspection, or customer service.</li> </ul> <h3 >Required Skills and Attributes</h3> <ul > <li >Strong interpersonal and communication skills to effectively interact with diverse sellers.</li> <li >Demonstrated ability to perform detailed vehicle inspections and generate precise reports.</li> <li >A professional demeanor and a keen eye for detail in all aspects of the role.</li> <li >Basic negotiation and problem-solving skills to assist in deal closure.</li> </ul> <h3 >Work Location</h3> <p >This <strong >full-time</strong> position is based in <strong >Dammam</strong>, Saudi Arabia.</p>

<p class="isSelectedEnd"><b>Job Summary</b></p><p class="isSelectedEnd">A company specializing in <strong>electrical tools and construction equipment</strong> wishes to attract a <strong>Mechanical Sales Engineer</strong> to manage and develop key customer relationships and attract new sales opportunities through field visits and customer site visits.</p><p>Tasks include understanding customers' technical needs, presenting appropriate products and solutions, preparing commercial offers, and following up on sales opportunities until completion and achievement of sales targets.</p><p><strong>A car provided by the company</strong> for field visits and customer visits.</p><p><b>Requirements</b></p><p></p><ul><li>Bachelor's degree in Mechanical Engineering or a related engineering discipline.</li><li>4 to 8 years of experience in technical sales, industrial equipment sales, construction equipment sales, or related products.</li><li>Experience dealing with companies, key clients, and contractors.</li><li>Good skills in sales, negotiation, and customer relationship building.</li><li>Ability to understand customers' technical needs and provide appropriate solutions.</li><li>Willingness for continuous field visits and customer site visits.</li><li>Proficiency in English, spoken and written.</li><li>Proficiency in computer use.</li><li>Ability to work according to targets and achieve sales goals.</li><li><b>Valid driver's license.</b></li></ul><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>&nbsp;About Us:</strong></span></p><br> <p>Soum is on a mission to revolutionise e-commerce in the MENA region and beyond by building the most convenient and trustworthy re-commerce marketplace in the region. We're reshaping how C2C marketplaces operate, making buying and selling second-hand products seamless and reliable. Since our launch in July 2021, Soum has become one of the fastest-growing startups in the region, achieving rapid expansion in both our team and product offerings. In recognition of our impact and growth, we are proud to have been named one of the Top 10 LinkedIn Startups in Saudi Arabia for 2024.</p><br> <p><span><strong>Job Overview</strong></span></p><br> Handle vehicle inspections throughout the car journey and support the Cars Operations team with day-to-day operational tasks.&nbsp;<br><br><p><b>Requirements:</b></p><br><ul> <li>Good knowledge and experience in car inspection</li> <li>Able to inspect vehicle body, exterior, interior, and overall condition</li> <li>Good automotive knowledge</li> <li>Arabic communication skills</li> <li>Attention to detail and ability to identify vehicle issues accurately</li> <li>Flexible and willing to support other operational tasks<br></li> </ul><br><p><b>Responsibilities:</b></p><br><ul> <li>Conduct the initial inspection of vehicles, including body, exterior, interior, and overall condition</li> <li>Conduct the final inspection before vehicle handover/completion</li> <li>Identify and report any damages, issues, or discrepancies</li> <li>Ensure vehicle condition is accurately documented</li> <li>Coordinate with the Operations team throughout the car journey</li> <li>Support other Cars Operations tasks when required<br></li> </ul><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Jasara Program Management Company (Jasara PMC) is a leading Joint Venture between Public Investment Fund (PIF), Jacobs, and Saudi Aramco, established to deliver world-class program management services across the Kingdom of Saudi Arabia.<br> Jasara plays a key role in supporting the realization of Saudi Vision 2030, particularly in delivering giga-projects and large-scale infrastructure developments.<br> We are seeking a Director for Roads and Car Parks to join JASARA PMC.<br> The Director – Roads and Car Parks serves as the Subject Matter Expert (SME) responsible for the strategic planning, assurance, governance, performance monitoring, operational readiness, asset management, and lifecycle optimization of roads, tunnels, and car park infrastructure.<br> The role provides technical leadership and oversight across the full asset lifecycle, ensuring infrastructure assets are safe, reliable, sustainable, compliant, and aligned with organizational objectives and industry best practices.<br> Key ResponsibilitiesStrategic Leadership Develop and implement the long-term strategy for roads, tunnels, and car park assets.<br> Establish asset management frameworks, standards, policies, and procedures aligned with international best practices.<br> Support executive leadership in defining infrastructure investment priorities and capital planning strategies.<br> Act as the technical authority and SME for all roads, tunnels, and parking-related infrastructure matters.<br> Asset Management and Lifecycle Planning Lead asset lifecycle management activities including planning, design review, operation, maintenance, renewal, and replacement strategies.<br> Develop and maintain asset management plans, asset condition assessments, and long-term investment programs.<br> Ensure infrastructure assets achieve required levels of service while optimizing whole-life costs.<br> Oversee asset criticality assessments and risk-based maintenance approaches.<br> Assurance and Governance Lead Stage Gate Assurance reviews for roads, tunnels, and car park projects.<br> Review project deliverables and provide technical recommendations for Go/No-Go decisions.<br> Ensure compliance with organizational governance requirements, industry standards, and regulatory obligations.<br> Conduct technical audits, performance reviews, and assurance assessments.<br> Design and Technical Oversight Review and approve engineering designs, specifications, standards, and technical submissions.<br> Ensure designs meet operational, safety, sustainability, accessibility, and maintainability requirements.<br> Evaluate innovative technologies, smart mobility solutions, and industry developments.<br> Provide expert technical guidance on road geometry, pavement systems, tunnel systems, drainage, parking facilities, traffic management, and associated infrastructure.<br> Operations and Maintenance Monitor operational performance of road, tunnel, and parking assets.<br> Ensure maintenance strategies are effectively implemented to maximize asset performance and reliability.<br> Drive continuous improvement initiatives to increase efficiency and service levels.<br> Support operational readiness and transition from project delivery to operations.<br> Risk Management and Compliance Identify infrastructure risks and develop mitigation strategies.<br> Ensure compliance with local regulations, international standards, and health and safety requirements.<br> Oversee emergency response, resilience planning, and business continuity considerations for critical infrastructure.<br> Monitor environmental and sustainability performance requirements.<br> Stakeholder Management Collaborate with internal and external stakeholders, including project teams, operators, consultants, contractors, regulators, and government authorities.<br> Represent the organization in technical committees and industry forums.<br> Provide executive-level reporting and technical advice to senior leadership.<br> Performance Monitoring Develop and monitor KPIs related to asset performance, condition, availability, reliability, and lifecycle costs.<br> Establish reporting dashboards and performance review processes.<br> Ensure data-driven decision-making through asset intelligence and performance analytics.<br> Key Accountabilities Roads, tunnels, and car park asset performance.<br> Asset lifecycle and maintenance strategies.<br> Technical governance and assurance.<br> Infrastructure risk management.<br> Operational readiness and transition assurance.<br> Asset management compliance and maturity.<br> Capital investment and renewal planning.<br> Service level achievement and optimization.<br> a { text-decoration: none; color: #464feb; } tr th, tr td { border: 1px solid #e6e6e6; } tr th { background-color: #f5f5f5; } Education Bachelor's degree in Civil Engineering or related discipline.<br> Master's degree in Engineering, Infrastructure Management, Asset Management, or a related field preferred.<br> Professional Certifications (Preferred) Chartered Engineer (CEng), PE, or equivalent.<br> Certified Asset Management Assessor (CAMA).<br> IAM Certificate/Diploma or equivalent Asset Management qualification.<br> PMP, PRINCE2, or equivalent project management certification.<br> Relevant transportation, tunnel, or infrastructure certifications.<br> Experience 20+ years of experience in transportation, infrastructure, roads, tunnels, or parking asset management.<br> Minimum 8 years in a senior leadership or management role.<br> Proven experience in large-scale infrastructure programs, smart cities, municipalities, giga projects, or transportation authorities.<br> Strong background in asset management, operations, maintenance, and infrastructure lifecycle planning.<br> Experience leading technical assurance and stage-gate reviews.<br></span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Automotive Electrical Technician<br>We are looking for a skilled Automotive Electrical Technician to join our team at Solutions Workshop for Car Maintenance.<br>Key Responsibilities:<br>Diagnose and repair electrical and electronic faults in all types of vehicles. Read and interpret vehicle wiring diagrams and electrical schematics. Use professional diagnostic scanners to identify and troubleshoot faults. Perform ECU diagnostics, programming, coding, and module calibration. Diagnose and repair charging and starting systems, including alternators and starters. Diagnose, repair, and service automotive air conditioning (A/C) systems. Identify electrical issues efficiently and perform accurate repairs. Conduct preventive inspections and ensure repairs meet manufacturer standards. Maintain a clean, safe, and organized work environment.<br>Requirements:<br>Proven experience as an Automotive Electrical Technician. Strong knowledge of automotive electrical systems and CAN Bus networks. Proficiency in using diagnostic scanners and programming tools. Ability to read and understand wiring diagrams and service manuals. Experience in alternator, starter, battery, and A/C diagnostics and repair. Strong troubleshooting and problem-solving skills. Valid driving license is preferred.

<h3 >About the Role</h3> <p >Petromin Corporation is seeking a <strong >Senior Infrastructure Engineer</strong> to join its Network Development &amp; Maintenance (NDM) team. This full-time, owner-side role is based in Rabigh, Makkah, Saudi Arabia, and is responsible for defining, validating, and governing all site-wide infrastructure systems for the Rabigh Special Project. The engineer ensures that utilities, roads, drainage, grading, and technical systems are designed, integrated, and executed in alignment with the approved master plan and Petromin’s operational and expansion requirements.</p> <p >The role involves overseeing infrastructure consultants and contractor execution from a technical compliance perspective, ensuring that all infrastructure systems are practical, scalable, and aligned with phased development requirements. This position also supports the General Manager of NDM in cross-functional requirements where infrastructure expertise is needed.</p> <h3 >Key Responsibilities</h3> <ul > <li >Define and govern all site-wide infrastructure strategies, including utilities, roads, drainage, grading, and service corridors.</li> <li >Review, challenge, and technically validate infrastructure-related deliverables produced by consultants.</li> <li >Ensure infrastructure systems align with the master plan, building layouts, and long-term expansion requirements.</li> <li >Oversee consultant deliverables to ensure completeness, quality, coordination, and alignment with project requirements.</li> <li >Oversee contractor execution to ensure compliance with approved infrastructure designs, specifications, and technical standards.</li> <li >Identify infrastructure design gaps, execution risks, or capacity constraints and recommend corrective actions.</li> <li >Coordinate closely with the Senior Architectural Lead to ensure alignment between infrastructure systems and overall site planning.</li> <li >Ensure infrastructure planning supports phased construction, early works, and future expansion without rework.</li> <li >Integrate geotechnical, topographical, and environmental inputs into infrastructure design and execution planning.</li> <li >Support value engineering initiatives to optimize infrastructure design, cost, and constructability.</li> <li >Maintain structured records of infrastructure assumptions, design decisions, risks, and consultant outputs.</li> <li >Support cross-functional organizational requirements as directed by the GM NDM, including infrastructure assessments and technical reviews across projects.</li> </ul> <h3 >Educational Qualifications</h3> <p >A <strong >Bachelor’s Degree in Civil, Mechanical, or Electrical Engineering</strong> is mandatory for this position.</p> <h3 >Professional Certifications</h3> <ul > <li >Mandatory registration with the <strong >Saudi Council of Engineers</strong>.</li> <li >PMP or an equivalent certification is preferred.</li> </ul> <h3 >Required Experience and Skills</h3> <ul > <li >Candidates must possess <strong >15-20 years of experience</strong> in infrastructure engineering and large-scale project development, preferably within industrial, logistics, or automotive environments.</li> <li >Proven experience in owner-side or consultant management roles is required.</li> <li >Strong technical understanding of infrastructure systems and integration.</li> <li >Ability to challenge consultants and validate technical proposals.</li> <li >Experience in multi-disciplinary coordination across design and execution.</li> <li >Ability to operate effectively in lean project environments with high accountability.</li> </ul> <h3 >Work Location and Type</h3> <p >This is a <strong >full-time position</strong> located in <strong >Rabigh, Makkah, Saudi Arabia</strong>, with potential coordination needs extending to Jeddah.</p>

Overview As an Application Engineer, you will be working with innovative companies in the aerospace/defense, oil/gas, communications, automation and machinery industries. You will be responsible for contributing to the marketing and sales of Math Works’ sophisticated engineering products; assisting in the development of components of software product models and simulations to demonstrate the use of Math Works’ MATLAB and Simulink products; developing components of technical engineering demonstrations of Math Works’ Simulink and MATLAB products to support the company’s sales activities; assisting senior team members in engagements with prospective and existing customers to understand their workflow and identifying relevant Math Works engineering solutions; and developing application examples and simulations to demonstrate how Math Works engineering software addresses<br>Qualifications A bachelor's degree in engineering (Aerospace, Electrical, Mechanical, Communications). At least 2 years of experience with MATLAB and Simulink in signal processing, radio frequency and wireless communications applications or equivalent academic experience. Excellent verbal and written communication and presentation skills in English.<br>Special Requirements Demonstrated expertise in model-based design using MATLAB and Simulink tools, including modeling, simulating and analyzing design, testing and deployment workflows for control design and automation applications in a range of industries -- automotive, aerospace, and robotics. Demonstrated expertise supporting customers with engineering data analysis workflows using MATLAB and Simulink. Demonstrated expertise in developing and delivering technical product demonstrations to customers and assessing product marketing strategy.<br>Daily activities include Technical engagement with customers to understand their project requirements and workflows and then recommend Math Works technical capabilities. Prepare and deliver technical presentations and demonstrate application examples (onsite visits, seminars, etc.). Work with sales and marketing teams to create strategies for different accounts and markets. Execute in-depth technical engagements with customers evaluating Math Works products. Technical support for customers using MATLAB, Simulink, and the entire suite of products.

Overview As an Application Engineer, you will be working with innovative companies in the aerospace/defense, oil/gas, communications, automation and machinery industries. You will be responsible for contributing to the marketing and sales of Math Works’ sophisticated engineering products; assisting in the development of components of software product models and simulations to demonstrate the use of Math Works’ MATLAB and Simulink products; developing components of technical engineering demonstrations of Math Works’ Simulink and MATLAB products to support the company’s sales activities; assisting senior team members in engagements with prospective and existing customers to understand their workflow and identifying relevant Math Works engineering solutions; and developing application examples and simulations to demonstrate how Math Works engineering software addresses<br>Qualifications A bachelor's degree in engineering (Aerospace, Electrical, Mechanical, Communications). At least 2 years of experience with MATLAB and Simulink in signal processing, radio frequency and wireless communications applications or equivalent academic experience. Excellent verbal and written communication and presentation skills in English.<br>Special Requirements Demonstrated expertise in model-based design using MATLAB and Simulink tools, including modeling, simulating and analyzing design, testing and deployment workflows for control design and automation applications in a range of industries -- automotive, aerospace, and robotics. Demonstrated expertise supporting customers with engineering data analysis workflows using MATLAB and Simulink. Demonstrated expertise in developing and delivering technical product demonstrations to customers and assessing product marketing strategy.<br>Daily activities include Technical engagement with customers to understand their project requirements and workflows and then recommend Math Works technical capabilities. Prepare and deliver technical presentations and demonstrate application examples (onsite visits, seminars, etc.). Work with sales and marketing teams to create strategies for different accounts and markets. Execute in-depth technical engagements with customers evaluating Math Works products. Technical support for customers using MATLAB, Simulink, and the entire suite of products.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span>About Lucid</span></span></p><br><p><span>At Lucid, we are creating exceptional mobility experiences through innovation to drive the world forward. Built on Lucid’s proprietary technology and software-defined vehicle architecture, our award-winning vehicles bring our “Compromise Nothing™” approach to the global automotive market. That means refusing to choose between performance and sustainability, design and engineering, ambition and integrity. In Lucid Air and Lucid Gravity, we have designed and built vehicles that have redefined their segments, combining exceptional range, performance, design, and expansive space in a single experience.</span><span>&amp;nbsp;</span></p><br><p><span>We achieve this through deep vertical integration, with design, engineering, and production&amp;nbsp;happening in-house&amp;nbsp;across our global offices and&amp;nbsp;manufacturing&amp;nbsp;facilities.&amp;nbsp;Our&amp;nbsp;teams&amp;nbsp;come&amp;nbsp;from&amp;nbsp;industries&amp;nbsp;around the world, united by a shared commitment to excellence.&amp;nbsp;By refusing to settle, you&amp;nbsp;can&amp;nbsp;help&amp;nbsp;redefine&amp;nbsp;what’s&amp;nbsp;possible and&amp;nbsp;shape the future of mobility.</span></p><br><br><p>Position Overview</p><br><p>ECU MFG HW/SW Engineer provides dedicated ownership of software release management across engineering builds, manufacturing, sustaining, and operations teams for In house Low Voltage ECUs. As program volume, ECU content, software complexity, production deployment, and sustaining activities continue to increase, a centralized resource is required to manage release timing, content readiness, validation status, traceability, field/manufacturing issue follow-up, and resolution across concurrent programs. This role supports both new program launches and sustaining operations by maintaining released software packages, coordinating updates for production and service needs, ensuring software and flashing information remain accurate, and driving closure of issues that impact internal sites, contract manufacturers, and ongoing production. This role will improve execution discipline by ensuring software releases and sustaining updates are planned, tracked, validated, documented, and communicated through each phase from engineering development to production rollout and post-launch support.</p><br><p>Key Responsibilities</p><br><p>&amp;nbsp;</p><br><ul><li>Support sustaining activities by coordinating troubleshooting for hardware-related issues impacting ECU flashing, manufacturing test execution, software deployment, or production continuity</li><li>Act as the technical point of contact between the in-house Low Voltage ECU team and Lucid Manufacturing teams to align on sustaining issues, escalation paths, technical containment, and production support needs</li><li>Serve as the central resource to establish and track SW releases, timing and content rollout based off program plans within cross functionals teams</li><li>Act as user champion when coordinating software releases with business stakeholders</li><li>Manage in-house ECU SW release process with Test Team (MFG), Operations and Contact Manufacturers</li><li>Collaborate with TPMs, SW engineers and test engineers to implement and maintain release management system, solutions, and processes.</li><li>Support other teams providing information requested (e.g. SW files location, flashing tools, traceability information, etc.) for all Engineering builds and Production</li><li>Communicate regularly to management on activities and status for all programs assigned</li><li>Review, track and sign off all SW QUALs/PCRs/ECR/ECOs for internal and external ECUs</li><li>Manage multiple concurrent releases/build and deployments from development to production rollout</li><li>Manage the pre-release SW testing in the Mfg Test lab, CM, and Internal sites</li><li>Collaborate with internal and external stakeholders and lead the team to achieve goals</li><li>Track all open SW issues that affect these teams and manage to resolution</li><li>To support engineering teams at HQ during final verification of SW intended to be released to production</li></ul><p>Skills</p><br><ul><li>HW Program Management or HW/SW TPM role in an Engineering role</li><li>Skilled in working with multiple organizations across different cultures and regions</li><li>Problem resolutions tools</li><li>Ability to work in a small, motivated group within a larger organization</li><li>Configuration management process (knowledge and implementation)<ul><li>Engineering Change Request, Issue manager and configuration management</li></ul></li></ul><p>Minimum Qualifications</p><br><ul><li>Bachelor’s degree required, in CS, EE, CE or related field</li><li>7+ years of experience in electronics to end customers</li><li>At least 5 years of experience in technical roles</li><li>Experience in the SW release process, SW testing, Jira, waterfall (Development), SCRUM, and build processes required</li><li>Experience in high volume Consumer or Enterprise, with Automotive ECU experience a definite plus</li><li>Microsoft Office Suite (Word, Excel, PowerPoint)</li><li>ERP, Bug tracking and ECO/BOM systems experience (Examples; NetSuite, Jira, Arena, MKS, Smart Bear)</li><li>Excellent communication skills (writing and oral)</li></ul><p><strong>&amp;nbsp;</strong></p><br><p><strong>Preferred qualifications</strong></p><br><ul><li>Knowledge of UDS standard (User level)</li><li>Knowledge of CAN and DoIP protocols (User level)</li><li>Automotive experience</li></ul><p>&amp;nbsp;</p><br>&amp;nbsp;<br>&amp;nbsp;<br>&amp;nbsp;<br>&amp;nbsp;<br>&amp;nbsp;<br>&amp;nbsp;<br>&amp;nbsp;<br>&amp;nbsp;<br><p><span><span><strong><span>Compensation</span></strong><span><strong> &amp;amp; Benefits:<span>&amp;nbsp;</span></strong><span>Lucid offers a comprehensive and competitive&amp;nbsp;</span><span>benefits package&amp;nbsp;including medical, dental, and vision insurance; life and disability coverage; paid time off; paid holidays, paid sick leave; and a&amp;nbsp;401(k) retirement&amp;nbsp;plan. Hourly/non-exempt employees accrue up to 120 hours paid time off, and salaried/exempt employee accrue up to 160 hours paid time off.&amp;nbsp;&amp;nbsp;Eligible employees may also&amp;nbsp;participate&amp;nbsp;in Lucid’s equity program and/or a discretionary annual cash incentive program. Incentive and equity awards, if applicable, are&amp;nbsp;determined&amp;nbsp;based on individual performance, role scope, market considerations, and overall company results,&amp;nbsp;in accordance with&amp;nbsp;the terms of the applicable plans.&amp;nbsp;&amp;nbsp;</span></span></span></span></p><br><p><strong><span>Equal Opportunity: </span></strong><span>At Lucid, we believe diversity strengthens everything we build. Lucid Motors is proud to be an equal opportunity employer and is committed to providing an inclusive workplace for all. We consider all qualified applicants without regard to race, color, national or ethnic origin, age, religion, disability, sexual orientation, gender, gender identity or expression, marital status, or any other characteristic protected by applicable state or federal laws and regulations.</span><span>&amp;nbsp;</span></p><br><p><strong><span>Accessibility:&amp;nbsp;</span></strong><span>Lucid Motors is committed to providing reasonable accommodations for qualified individuals with disabilities. If you need any&amp;nbsp;accommodation to&amp;nbsp;participate&amp;nbsp;in the application process, please contact us at&amp;nbsp;TA-Operations &amp;lt;@&amp;gt; lucidmotors.com.</span><span> <span><strong>This email address is designated solely for accommodation requests and is not monitored for job applications or resume submissions. To be considered for employment, all applications must be submitted through the Lucid Motors Careers website.</strong></span></span></p><br><p><strong><span>Candidate Data Privacy:&amp;nbsp;</span></strong><span>By&amp;nbsp;submitting&amp;nbsp;your application, you understand and agree that your personal data will be processed&amp;nbsp;in accordance with&amp;nbsp;our&amp;nbsp;</span><span><span>Candidate Privacy Notice</span></span><span>.</span><span>&amp;nbsp;</span></p><br><p><strong><span>To all recruitment agencies:</span></strong><span>Lucid Motors does not accept agency resumes. Please do not forward resumes to Lucid Motors. Lucid Motors is not responsible for any fees related to unsolicited resumes.</span><span>&amp;nbsp;</span></p><br><p><span>&amp;nbsp;</span></p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>