Automotive Engineer Jobs in Saudi

Job description:<br><br><p>The Systems Engineer will be based at King Khalid International Airport (KKIA) in Riyadh and will report directly to the Maintenance Manager. The role is responsible for managing and supervising the execution of maintenance activities related to the Airfield Lighting Control and Monitoring System (ALCMS), Airfield Ground Lighting (AGL), and Constant Current Regulators (CCRs) under the SLA contract at King Khalid International Airport. The Systems Engineer will assess the airport’s repair and maintenance needs and ensure that all activities are properly planned, coordinated, executed, and completed according to contractual, operational, technical, and safety requirements. The role requires a proactive and self-driven engineer who can troubleshoot complex technical issues, take ownership of assigned tasks, and develop effective solutions with limited supervision.</p><p><strong>You will make an impact by:</strong></p><ul> <li>Managing the maintenance team with direct responsibility for the maintenance of ALCMS, AGL, CCRs, and related electronic systems and equipment installed at the airport.</li> <li>Supervising, planning, organizing, directing, and evaluating the work of employees.</li> <li>Adjusting assignments, procedures, and schedules as necessary.</li> <li>Scheduling and assigning work, including overtime, vacations, and other time off.</li> <li>Participating in the selection process for subordinate personnel.</li> <li>Managing the execution of maintenance tasks within the defined scope.Managing work orders, including their issuance, execution, reporting, follow-up, and closure.</li> <li>Maintaining records and preparing reports related to airfield maintenance and repair activities.</li> <li>Ensuring the availability of spare parts, tools, equipment, vehicles, and other required resources.</li> <li>Coordinating daily with the Maintenance Manager regarding unplanned activities that require additional staff support.</li> <li>Establishing preventive, planned, corrective, and unplanned maintenance activities for the scope included in the maintenance plan.</li> <li>Following up, evaluating, and optimizing all preventive maintenance procedures.</li> <li>Following corrective maintenance work orders and closing completed work orders in the Computer-Aided Facility Management system (CAFM).Preparing and submitting Permit to Work (PTW) requests to the Customer Representative correctly and within the required time.</li> <li>Enforcing safety rules and regulations and ensuring that all work progresses according to approved procedures, project plans, and specifications.</li> <li>Preparing, signing, and forwarding all documents required for submission to the Customer Representative to the Maintenance Manager for approval.</li> <li>Obtaining cost figures and estimates to support the preparation of the maintenance contract budget.</li> <li>Recommending additional capital equipment, replacement of existing equipment, and the purchase of required spare parts.</li> <li>Coordinating with the Maintenance Manager regarding the review, control, and updating of technical documentation.</li> <li>Leading the troubleshooting of complex technical faults, performing root-cause analysis, and implementing effective corrective actions.</li> <li>Taking ownership of technical issues from initial identification through to final resolution.</li> <li>Proactively identifying recurring faults, operational risks, and opportunities to improve system reliability and maintenance performance.</li> <li>When obstacles arise, actively exploring alternative solutions, seeking the necessary support, and escalating the matter promptly rather than allowing the task to stop.</li> <li>Participating in the airport’s on-call, recall, and standby programmes.</li> <li>Being responsible for achieving the SLA contract KPIs.</li> </ul><p><strong>The talent we want to inspire has:</strong></p><ul> <li>A diploma in electrical/electronic engineering or an equivalent qualification.</li> <li>A minimum of 10 years of maintenance experience, including specific hands-on experience with ALCMS, AGL systems, and CCRs.</li> <li>Strong knowledge of the operation, maintenance, and troubleshooting of airfield lighting control systems, AGL circuits, and CCR equipment.</li> <li>Skill in using standard and specialized tools required for the work.</li> <li>The ability to interpret, understand, and effectively carry out complex written and verbal technical instructions.</li> <li>The ability to communicate effectively by radio with the Air Traffic Control Tower and comply with applicable rules regarding vehicle use within airport movement and non-movement areas.</li> <li>The ability to prepare detailed technical reports and provide recommendations for improving maintenance operations.</li> <li>The ability to establish and maintain effective working relationships with colleagues, customers, contractors, and the airport operator.</li> <li>Strong ability to supervise, train, motivate, and inspect the work of subordinate employees.</li> <li>Excellent knowledge of international safety rules and regulations.Good knowledge of applicable ICAO standards.</li> <li>Excellent spoken and written English; knowledge of any additional language is considered an advantage.</li> <li>Strong technical troubleshooting, analytical, and problem-solving skills.</li> <li>A proactive and self-driven approach, with the ability to take initiative and work effectively with limited supervision.</li> <li>A strong sense of ownership and accountability for assigned tasks, technical issues, and operational results.</li> <li>A solution-oriented mindset, including the ability to identify practical alternatives when the original approach cannot be completed.</li> <li>The ability to remain focused and make sound decisions in a safety-critical and operationally demanding environment.</li> </ul><p><strong>What’s on offer:</strong></p><p>A dynamic and challenging working environment that encourages professional growth and continuous learning. The opportunity to work with safety-critical airport systems and contribute directly to reliable airport operations. Opportunities to shape the future of our industry and make a significant impact on the company’s business. A collaborative culture that values innovation, integrity, accountability, and inclusion. A competitive compensation package, including health benefits and other applicable benefits.</p><p>If you want to join a global business and are a driven, proactive, and passionate team player, this is your opportunity to come on board.</p><p>To learn more about working at ADB SAFEGATE, please visit our Careers website.</p><p>&nbsp;</p><p>https://adbsafegate.com/about/career/</p><p>&nbsp;<br><br></p>We offer:<br><br><p>What to learn more about working at ADB SAFEGATE then check out our Career's website</p><p>https://adbsafegate.com/about/career/</p><p>&nbsp;</p><p>&nbsp;</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Technical Advisor - Piping<br><br><p>Under broad direction, functions as a technical specialist who makes decisions and recommendations that are recognized as authoritative and have a far reaching impact on extensive engineering and related activities of the company. Negotiates critical and controversial issues with top-level engineers and officers of other organizations and companies. Performs advisory and consulting work for the organization as a recognized authority for broad program areas or in an intensely specialized area. Job role contributes directly to value creation. Skills are typically acquired through an undergraduate degree in Engineering and a minimum of 10 years related experience, with average experience of 15+ years.</p><br><br><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<ul><li>Prepare surfaces for painting by cleaning, sanding, and masking areas to ensure a flawless finish.</li><li>Mix and match paint colors to meet customer specifications, ensuring consistency and quality in every application.</li><li>Apply primer and paint using spray guns or other equipment, demonstrating precision and attention to detail.</li><li>Inspect painted surfaces for defects, making necessary adjustments or reapplications to achieve perfection.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent; vocational training in automotive painting is a plus.</li><li>Minimum of 2-3 years of experience in automotive painting or related field, showcasing a strong portfolio.</li><li>Certification in automotive refinishing or related areas, demonstrating commitment to industry standards.</li><li>Experience working with various paint types, including water-based and solvent-based products, is essential.</li></ul>

<p>YOU ARE As an AI/ML Computational Scientist, you will design, build, and operationalize artificial intelligence and machine learning solutions for enterprise clients, combining custom models with cloud and third-party AI services to deliver production-ready outcomes. Your role spans the full solution lifecycle assessing client needs and data, selecting and customizing models (including Deep Learning, Generative AI, and Large Language Models), designing scalable data and DevOps &amp; MLOps pipelines for training and production, and ensuring quality, value, and reliability of deployed systems. THE WORK Formulate real-world problems into practical, efficient, and scalable AI and Machine Learning solutions Develop and implement machine learning algorithms, models, and computational systems; design and build scalable data pipelines to support model training and production with DevOps &amp; MLOps Customize and apply Deep Learning and Gen AI models for various use cases based on the business needs, data availability, system and infrastructure requirements - including edge device and HPC Engage in research and development of new AI and high-performance compute algorithms, models, and simulations along with their applications to solve complex business problems at client sites Work with large-scale datasets and utilize data preprocessing techniques to ensure high-quality input for training and production Implement and maintain efficient data storage and retrieval mechanisms for models and knowledge using appropriate tools Justify the value of model approaches in business problems Collaborate with teams from both business and technical sides, including users, use case representatives, business owners, engineers, architects, and UI designers, to achieve end-to-end project goals and integrate into production</p><p><strong>Desired Candidate Profile</strong></p><ul><li>EDUCATION Bachelor's Degree or equivalent</li><li>BASIC (REQUIRED) QUALIFICATION Proven experience as a machine learning engineer or scientist, deploying models in production at scale , including monitoring, alerting, automatic bug filing and auditing.</li><li>Experience in applying theoretical foundations of computer science, including computer system architecture, system engineering, and programming</li><li>Hands-on experience in distributed computing systems and architecture that may include big data, high-performance compute, engineering simulations, scientific compute, grid and cloud computing, distributed networks</li><li>Experience in building and deploying AI/ML based software to a cloud environment.</li><li>PREFERRED QUALIFICATION Proficiency in Python and python-based AI/ML framework and familiarity with relevant libraries and frameworks (e.g., TensorFlow, PyTorch)..</li><li>Experience working with language models like LLM's APIs and optimizing their usage for specific applications.</li><li>Experience with the following programming languages: Python, C++, Java, R, SQL</li><li>Strong written &amp; verbal communication skills and ability to communicate complex technical concepts to non-technical stakeholders</li><li>Strong client-facing skillsets in a consulting environment</li><li>Strong cross-functional skills with the ability to collaborate with a variety of internal and client-side teams</li><li>Entrepreneurial mindset with a curiosity and passion for emergent tech and driving innovation</li><li>MS or PhD in related field preferred (computer science, engineering, etc.)</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Description</b>Overview<p>Are you ready to take up a vital role in shaping some of our exciting projects? How about joining our talented team, where everyone has a voice, and together we face our clients' problems head-on. It's a diverse and inclusive work environment where world-class talent knows no distinctions. We are looking for innovative, forward-thinking people who enjoy challenge and actively seek to develop and improve work processes.</p><br><p>Join us as an Assistant Construction Director, T&amp;C and Hand-Over in our Transportation Project Delivery team and you will have the opportunity to contribute the delivery of an exciting multi-disciplinary Transportation project. You will lead the construction supervision functional group across all stages of the project lifecycle, including preliminary works, design, engineering and construction, in collaboration with other functional leads within the organization, and in close coordination with the D&amp;B Contractor overseeing the construction, testing and commissioning and hand-over of the works, with focus on delivery and special emphasis on safety.</p><br><p>With such size, scope and scale, you'll have plenty of opportunities to keep yourself challenged and to grow your technical leadership skills.</p><br>Your role<ul><li>The Head of Construction, Testing and Commissioning and Hand-Over is responsible for leading and managing construction supervision activities across the Project. The role ensures that construction works are delivered in accordance with approved designs, contract specifications, quality standards, safety requirements, budget constraints, and project schedules. The duties have continuity through leading the testing and commissioning activities and hand-over of the works to the Client and/or operator. The Manager oversees supervision teams, coordinates with clients and contractors, and provides leadership to achieve successful project delivery.</li><li>Lead and manage construction supervision teams, including Resident Engineers, Discipline Engineers, Inspectors, and support staff.</li><li>Establish project supervision objectives, priorities, and performance expectations.</li><li>Mentor, develop, and evaluate team members to maintain a high-performing organization.</li><li>Promote a culture of safety, quality, collaboration, and continuous improvement.</li><li>Monitor project progress and identify potential risks, delays, and issues.</li><li>Direct corrective and preventive actions to minimize project impacts.</li><li>Ensure timely completion of project deliverables and reporting requirements.</li><li>Serve as the primary point of contact for clients regarding construction supervision matters.</li><li>Build and maintain strong relationships with clients, contractors, authorities, and other stakeholders.</li><li>Participate in project review meetings and executive-level presentations.</li><li>Monitor contractor compliance with contract terms and conditions.</li><li>Review and provide recommendations regarding variations, claims, extensions of time, and contractual disputes.</li><li>Ensure proper documentation and record management practices are maintained.</li><li>Monitor project supervision budgets and resource utilization.</li><li>Review project forecasts, staffing plans, and financial performance.</li><li>Support management in achieving revenue and profitability targets.</li><li>Identify opportunities for operational efficiencies and cost optimization.</li><li>Prepare and present periodic project performance reports to senior management and clients.</li><li>Monitor project KPIs related to schedule, quality, safety, and cost.</li><li>Escalate critical issues and provide strategic recommendations.</li><li>Ensure compliance with organizational governance and reporting requirements.</li></ul>About you<ul><li>Degree in a related Architecture of Engineering discipline. Master’s degree is preferred.</li><li>Professional membership with a recognized engineering institution is preferred.</li><li>Minimum 18 years of experience in construction and engineering projects.</li><li>At least 10 years in a managerial or leadership role within construction supervision, project management, or engineering consultancy.</li><li>Proven experience overseeing medium or large-scale infrastructures, complex buildings and/or urban developments.</li><li>Experience managing multidisciplinary teams and coordinating with other functional leads, majorly contract/commercial management, projects controls, engineering.</li><li>Experience coordinating with contractors, consultants, and government authorities. Excellent coordination and stakeholder management skills.</li><li>Robust competency on construction supervision, site management, quality management and construction planning.</li><li>Good competency on contract and commercial management, project controls, quality control and engineering.</li><li>Good knowledge of inspection and testing techniques with regard to temporary and permanent works.</li><li>Strong analytical and problem-solving abilities, mid and long-term thinking and anticipation skills.</li><li>Strong engineering judgement, communication and technical reporting skills.</li><li>Strong ability on negotiation, conflict resolution, decision-making and problem-solving.</li><li>High level of organisation and commitment to your work.</li><li>Excellent personal organisational skills and team work.</li><li>Used to work in a fast-paced office environment combining construction supervision works and administration work.</li><li>Open to adapt to flexible working hours arrangements.</li><li>Experience working in the KSA or wider Middle East region is preferred.</li></ul><span>Rewards &amp; benefits</span><p><span>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.</span></p><br><p><span>This includes:</span></p><br><ul><li><span>Tax-free salary.</span></li><li><span>Life insurance coverage.</span></li><li><span>Medical insurance.</span></li><li><span>Annual leave balance.</span></li><li><span>Company gratuity scheme.</span></li><li><span>Discretionary bonus program.</span></li><li><span>Annual flight contribution.</span></li><li><span>Transportation &amp; housing allowances.</span></li><li><span>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition.</span></li></ul><p><span>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</span></p><br><span>About AtkinsRéalis</span><p><span>We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people. </span></p><br><p><span>Find out more.</span></p><br><b>Worker Type</b>Employee<b>Job Type</b>Regular<p><span><i>At </i></span> <i><span>AtkinsRéalis</span></i><span><i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. &nbsp;</i></span></p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 5+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p><strong>Company Overview:</strong></p><p><br></p><p>Dar, the founding member of the Sidara group, is an international multidisciplinary consulting organization specializing in engineering, architecture, planning, environment, project management, facilities management, and economics. Sidara operates in 60 countries with 20,500 professionals, Dar connects people, places, and communities through innovative solutions to the world's most complex challenges. We deliver projects from inception through completion, embracing challenges to empower communities worldwide. Learn more at<strong> www.dar.com</strong>.</p><p><br></p><p><strong>Our Vision and Values:</strong></p><p><br></p><p>We aspire to be the chosen home of those with a gift for crafting solutions that empower people and an unwavering passion for learning and innovation. Our core values shape our culture and guide our decision-making. We are committed to:</p><p><br></p><ul><li>Excellence</li><li>Responsibility</li><li>Empowerment</li><li>Connectivity</li><li>Courage</li></ul><p><br></p><p><strong>Role Overview:</strong></p><p><br></p><p>Traffic and Detour Engineer responsible for planning, designing, reviewing, and supervising all temporary traffic management schemes and detours for road and bridge construction projects, ensuring safety, efficiency, and compliance with Saudi traffic regulations and project requirements.</p><p><br></p><p><strong>Key Responsibilities</strong></p><p><br></p><ol><li><strong>Traffic Management &amp; Detour Planning</strong></li></ol><ul><li>Prepare and review Traffic Management Plans (TMPs) and detour designs in coordination with the design and construction teams.</li><li>Ensure compliance with MOT / RCRC traffic standards, Saudi Building Codes, and safety regulations.</li><li>Coordinate with stakeholders (traffic police, municipalities, utilities, and client representatives) for approvals of detours and closures.</li></ul><ol><li><strong>Safety &amp; Compliance</strong></li></ol><ul><li>Implement international and local best practices for road safety in work zones.</li><li>Monitor site implementation of traffic diversions, signage, barriers, and lighting.</li><li>Conduct risk assessments for detour operations and recommend mitigation measures.</li></ul><ol><li><strong>Supervision &amp; Monitoring</strong></li></ol><ul><li>Supervise the contractor’s traffic management and detour works on site.</li><li>Inspect installed detours and traffic arrangements, ensuring they are properly executed and maintained.</li><li>Ensure continuous accessibility for emergency services, local residents, and businesses during construction.</li></ul><ol><li><strong>Coordination &amp; Communication</strong></li></ol><ul><li>Liaise with client, authorities, and other stakeholders regarding traffic diversions and road closures.</li><li>Provide technical advice and solutions for unexpected site traffic issues.</li><li>Support project scheduling to minimize disruption to traffic flow.</li></ul><ol><li><strong>Documentation &amp; Reporting</strong></li></ol><ul><li>Review and approve contractor’s traffic detour drawings and method statements.</li><li>Maintain records of traffic management activities and incidents.</li><li>Prepare progress reports and highlight non-compliance or safety concerns.</li></ul><p><br></p><p><strong>Qualifications &amp; Skills</strong></p><p><br></p><ul><li>Bachelor’s Degree in Civil Engineering / Transportation Engineering or equivalent.</li><li>Minimum 7 years of experience.</li><li>Strong knowledge of Saudi MOT/RCRC traffic regulations, work zone safety standards, and international best practices.</li><li>Excellent communication and coordination skills with authorities and stakeholders.</li></ul><p><br></p>

<p><strong>Company Overview:</strong></p><p><br></p><p>Dar, the founding member of the Sidara group, is an international multidisciplinary consulting organization specializing in engineering, architecture, planning, environment, project management, facilities management, and economics. Sidara operates in 60 countries with 20,500 professionals, Dar connects people, places, and communities through innovative solutions to the world's most complex challenges. We deliver projects from inception through completion, embracing challenges to empower communities worldwide. Learn more at<strong> www.dar.com</strong>.</p><p><br></p><p><strong>Our Vision and Values:</strong></p><p><br></p><p>We aspire to be the chosen home of those with a gift for crafting solutions that empower people and an unwavering passion for learning and innovation. Our core values shape our culture and guide our decision-making. We are committed to:</p><p><br></p><ul><li>Excellence</li><li>Responsibility</li><li>Empowerment</li><li>Connectivity</li><li>Courage</li></ul><p><br></p><p><br></p><p><strong>Role Overview:</strong></p><p><br></p><p>Traffic and Detour Engineer responsible for planning, designing, reviewing, and supervising all temporary traffic management schemes and detours for road and bridge construction projects, ensuring safety, efficiency, and compliance with Saudi traffic regulations and project requirements.</p><p><br></p><p><strong>Key Responsibilities</strong></p><p><br></p><ol><li><strong>Traffic Management &amp; Detour Planning</strong></li></ol><ul><li>Prepare and review Traffic Management Plans (TMPs) and detour designs in coordination with the design and construction teams.</li><li>Ensure compliance with MOT / RCRC traffic standards, Saudi Building Codes, and safety regulations.</li><li>Coordinate with stakeholders (traffic police, municipalities, utilities, and client representatives) for approvals of detours and closures.</li></ul><ol><li><strong>Safety &amp; Compliance</strong></li></ol><ul><li>Implement international and local best practices for road safety in work zones.</li><li>Monitor site implementation of traffic diversions, signage, barriers, and lighting.</li><li>Conduct risk assessments for detour operations and recommend mitigation measures.</li></ul><ol><li><strong>Supervision &amp; Monitoring</strong></li></ol><ul><li>Supervise the contractor’s traffic management and detour works on site.</li><li>Inspect installed detours and traffic arrangements, ensuring they are properly executed and maintained.</li><li>Ensure continuous accessibility for emergency services, local residents, and businesses during construction.</li></ul><ol><li><strong>Coordination &amp; Communication</strong></li></ol><ul><li>Liaise with client, authorities, and other stakeholders regarding traffic diversions and road closures.</li><li>Provide technical advice and solutions for unexpected site traffic issues.</li><li>Support project scheduling to minimize disruption to traffic flow.</li></ul><ol><li><strong>Documentation &amp; Reporting</strong></li></ol><ul><li>Review and approve contractor’s traffic detour drawings and method statements.</li><li>Maintain records of traffic management activities and incidents.</li><li>Prepare progress reports and highlight non-compliance or safety concerns.</li></ul><p><br></p><p><strong>Qualifications &amp; Skills</strong></p><p><br></p><ul><li>Bachelor’s Degree in Civil Engineering / Transportation Engineering or equivalent.</li><li>Minimum 15 years of experience.</li><li>Strong knowledge of Saudi MOT/RCRC traffic regulations, work zone safety standards, and international best practices.</li><li>Excellent communication and coordination skills with authorities and stakeholders.</li></ul><p><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul><li>Mechanical design and technical delivery responsibility</li><li>Based in Riyadh, KSA</li></ul><br><p><b>About SJ</b><br>Surbana Jurong Group is a diverse collective of engineering and consultancy businesses with professionals across 120+ offices in 40+ countries. We bring together technical expertise across the full project lifecycle, supporting clients across sectors including infrastructure, transport, water, aviation, energy and the built environment.</p><br><br><p><b>The Role</b><br>We are seeking an experienced Associate / Principal Mechanical Engineer to lead mechanical design and technical delivery for major multidisciplinary projects in the Middle East.</p><br><br><p>The role will focus on developing and reviewing mechanical designs, leading design activities and coordinating mechanical services with other disciplines to deliver technically robust and compliant solutions.</p><br><br><p><b>The Ideal Candidate</b></p><br><ul><li>12+ years of relevant mechanical engineering design experience.</li><li>Strong consultancy experience delivering medium to large-scale building/infrastructure projects.</li><li>Proven experience leading mechanical design from concept through detailed design and tender stages.</li><li>Strong technical knowledge of HVAC, chilled water systems, ventilation, heating, plumbing and drainage, and fire protection systems.</li><li>Experience preparing and reviewing design calculations, drawings, specifications, reports and technical submissions.</li><li>Strong multidisciplinary coordination experience with architectural, structural, electrical and other engineering disciplines.</li><li>Minimum 5 years of Middle East design experience, preferably with Saudi/GCC projects.</li><li>Strong knowledge of relevant international standards, codes and Middle East regulations.</li><li>Proficiency in AutoCAD, Revit/BIM and relevant mechanical design/calculation software.</li><li>Strong technical leadership, communication and problem-solving skills.</li><li>Professional registration/chartership would be advantageous.</li></ul><br><p><b>How to Apply</b><br>All applications must be submitted online. To apply, click on the "Apply Now" link below and follow the prompts.</p><br><br><p><b>Wrap Up</b><br>As an inclusive and growing organisation, SJ is committed to building a global community of talented professionals and thought leaders.</p><br><br><p>We recognise the value and importance of a diverse and inclusive workplace and look for people with different backgrounds, skills and expertise to drive innovation and shared learning across our growing global network.</p><br><br><p>All recruitment activities go through our Resourcing function and currently, this role doesn’t require agency input. Please do not forward resumes directly to SJ employees/managers; we do not accept unsolicited resumes and are not responsible for any associated fees.</p><br><p>At Surbana Jurong, we put talent, hard work, teamwork and a fun workplace together to approach problems and solve them creatively and collaboratively. Join us in making a positive impact on the world!</p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<strong>Company Description</strong><p><br></p><p><strong>SAWAED CONSTRUCTION COMPANY</strong> is a growing construction and engineering company operating in the Riyadh Region, delivering mechanical, civil, and infrastructure projects to a diverse range of clients.</p><p>SAWAED is committed to quality, safety, efficiency, and reliable project delivery. We work closely with suppliers, contractors, consultants, and customers to provide effective technical solutions and build long-term business relationships.</p><p><br></p>Role Description<p><br></p><p>We are looking for an experienced <strong>Mechanical Pipes Sales Engineer</strong> to join our team in Riyadh.</p><p>The successful candidate will be responsible for developing and managing sales of <strong>mechanical piping products</strong>, identifying new business opportunities, building strong relationships with contractors, consultants, distributors, and end users, and providing technical support throughout the sales process.</p><p>Key responsibilities include:</p><ul><li>Developing new sales opportunities within the <strong>Saudi Arabian market</strong>.</li><li>Promoting and selling <strong>PPR, PVC, and HDPE pipes in all available diameters</strong>.</li><li>Building and maintaining strong relationships with contractors, consultants, distributors, and end users.</li><li>Conducting customer visits, site visits, and technical meetings.</li><li>Understanding customer requirements and recommending suitable piping solutions.</li><li>Preparing and presenting technical and commercial quotations.</li><li>Following up on quotations and negotiating with customers to close sales.</li><li>Monitoring market trends, competitors, pricing, and customer requirements.</li><li>Coordinating with engineering, procurement, and other internal teams.</li><li>Supporting customers with technical and product-related inquiries.</li><li>Maintaining accurate sales records and following up on after-sales requirements.</li><li>Achieving agreed sales and business development targets.</li></ul><li><br></li>Mandatory Qualifications &amp; Experience<p><br></p><ul><li><strong>Bachelor’s Degree in Mechanical Engineering</strong> or a closely related field.</li><li><strong>Proven sales experience within the Kingdom of Saudi Arabia.</strong></li><li><strong>Direct and proven experience in selling PPR, PVC, and HDPE pipes is MANDATORY.</strong></li><li><strong>Strong knowledge of piping products, applications, specifications, and different pipe diameters.</strong></li><li><strong>Strong understanding of the Saudi construction and infrastructure market.</strong></li><li><strong>Existing relationships with contractors, consultants, distributors, and project clients are highly preferred.</strong></li><li><strong>Strong communication, negotiation, presentation, and business development skills.</strong></li><li><strong>Ability to conduct professional client and site meetings.</strong></li><li><strong>Good knowledge of MS Office</strong>; familiarity with CRM systems is an advantage.</li><li>Valid Saudi driving license is preferred.</li></ul><p><br></p>IMPORTANT – PLEASE READ<p><br></p><p><strong>This position is strictly for candidates with direct sales experience in PPR, PVC, and HDPE pipes within the Saudi Arabian market.</strong></p><p><strong>Candidates with general Mechanical, HVAC, maintenance, inspection, or other sales experience without direct piping sales experience will NOT be considered.</strong></p><p><strong>Location:</strong> Riyadh Region, Saudi Arabia</p><ul><li><strong>Employment Type:</strong> Full-Time | On-Site</li></ul>

<ul><li><p>Ensure the availability and adequacy of all the Supervision Consultant’s (Engineer’s) and Contractors’ HSE</p></li></ul><p>provisions as per the requirements of this Policy, the Construction Contracts General Conditions and</p><p>Specifications, their HSE Plans, Employer’s HSE Requirements, and the applicable local/national and</p><p>international statutes, Regulations</p><ul><li><p>Measuring the HSE performance of the Supervision Consultant (Engineer) and Contractors and advise on the</p></li></ul><p>actions necessary for improvement.</p><ul><li><p>investigating direct and root/underlying causes of accidents/incidents and advising recommendations to</p></li></ul><p>prevent recurrence of the same</p><ul><li><p>Recording and following-up on any noted safety hazards and non-conformances to HSE regulators and parties</p></li></ul><p>having jurisdiction.</p><ul><li><p>Coordinating with the PMC Project Manager/Construction Manager in the implementation of effective HSE</p></li></ul><p>systems on their Projects sites.</p><ul><li><p>Liaison with the Employer, PMC (Hill International) and the Local/Enforcing Authorities / Municipality</p></li></ul><p>Authorities in ensuring adherence of all parties to the HSE Requirements of their Projects.</p><ul><li><p>Training and inducting staff on HSE.</p></li><li><p>Reviewing and approving Contractors’ HSE documents, submittals, drawings, etc to verify their suitability,</p></li></ul><p>adequacy and conformance.</p><ul><li><p>Ensuring the Supervision Consultant’s (Engineer’s) and Contractors’ full compliance with the Project HSE</p></li></ul><p>Requirements.</p><ul><li><p>Carrying-out scheduled and unscheduled HSE audits and inspections and reporting to the Project</p></li></ul><p>management team on any identified non-conformances for necessary action and correction by the violating</p><p>party.</p><ul><li><p>Informs themselves of the relevant Quality, Environmental, Safety and Occupational Health Policies, Manuals</p></li></ul><p>and Procedures within Hill International and ensures continued compliance with these requirements while</p><p>employed by Hill.</p><ul><li><p>Perform other duties as assigned by the line manager/supervisor.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>A degree in engineering (or equivalent work experience) supplemented by relevant international certifications.</p></li><li><p>Minimum 10 years’ experience in large-scale projects.</p></li><li><p>Experience in managing all aspects of HSSE on projects or facilities.</p></li><li><p>Knowledge of HSSE sciences/engineering systems, principles and methodologies. Extensive and</p></li></ul><p>demonstrated knowledge of national and international HSSE laws/regulations and regulatory/resource</p><p>agencies permitting processes and responsibilities, industry standards for HSSE compliance and best</p><p>management practices for minimizing potential HSSE impacts during project execution. Knowledge of</p><p>technical terminology common to industrial hygiene, health physics, safety engineering, and environmental</p><p>compliance.</p><ul><li><p>Ability to deal effectively with HSSE matters with contractors/subcontractors or consultants during</p></li></ul><p>construction.</p><ul><li><p>Ability to prepare reports related to HSSE activities in the projects</p></li><li><p>Excellent English written and verbal communication skills. Excellent presentation skills.</p></li><li><p>Experience of working internationally (preference KSA experience)</p></li></ul>

<ul><li><p>Ensure the availability and adequacy of all the Supervision Consultant’s (Engineer’s) and Contractors’ HSE</p></li></ul><p>provisions as per the requirements of this Policy, the Construction Contracts General Conditions and</p><p>Specifications, their HSE Plans, Employer’s HSE Requirements, and the applicable local/national and</p><p>international statutes, Regulations</p><ul><li><p>Measuring the HSE performance of the Supervision Consultant (Engineer) and Contractors and advise on the</p></li></ul><p>actions necessary for improvement.</p><ul><li><p>investigating direct and root/underlying causes of accidents/incidents and advising recommendations to</p></li></ul><p>prevent recurrence of the same</p><ul><li><p>Recording and following-up on any noted safety hazards and non-conformances to HSE regulators and parties</p></li></ul><p>having jurisdiction.</p><ul><li><p>Coordinating with the PMC Project Manager/Construction Manager in the implementation of effective HSE</p></li></ul><p>systems on their Projects sites.</p><ul><li><p>Liaison with the Employer, PMC (Hill International) and the Local/Enforcing Authorities / Municipality</p></li></ul><p>Authorities in ensuring adherence of all parties to the HSE Requirements of their Projects.</p><ul><li><p>Training and inducting staff on HSE.</p></li><li><p>Reviewing and approving Contractors’ HSE documents, submittals, drawings, etc to verify their suitability,</p></li></ul><p>adequacy and conformance.</p><ul><li><p>Ensuring the Supervision Consultant’s (Engineer’s) and Contractors’ full compliance with the Project HSE</p></li></ul><p>Requirements.</p><ul><li><p>Carrying-out scheduled and unscheduled HSE audits and inspections and reporting to the Project</p></li></ul><p>management team on any identified non-conformances for necessary action and correction by the violating</p><p>party.</p><ul><li><p>Informs themselves of the relevant Quality, Environmental, Safety and Occupational Health Policies, Manuals</p></li></ul><p>and Procedures within Hill International and ensures continued compliance with these requirements while</p><p>employed by Hill.</p><ul><li><p>Perform other duties as assigned by the line manager/supervisor.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>A degree in engineering (or equivalent work experience) supplemented by relevant international certifications.</p></li><li><p>Minimum 10 years’ experience in large-scale projects.</p></li><li><p>Experience in managing all aspects of HSSE on projects or facilities.</p></li><li><p>Knowledge of HSSE sciences/engineering systems, principles and methodologies. Extensive and</p></li></ul><p>demonstrated knowledge of national and international HSSE laws/regulations and regulatory/resource</p><p>agencies permitting processes and responsibilities, industry standards for HSSE compliance and best</p><p>management practices for minimizing potential HSSE impacts during project execution. Knowledge of</p><p>technical terminology common to industrial hygiene, health physics, safety engineering, and environmental</p><p>compliance.</p><ul><li><p>Ability to deal effectively with HSSE matters with contractors/subcontractors or consultants during</p></li></ul><p>construction.</p><ul><li><p>Ability to prepare reports related to HSSE activities in the projects</p></li><li><p>Excellent English written and verbal communication skills. Excellent presentation skills.</p></li><li><p>Experience of working internationally (preference KSA experience)</p></li></ul>

<strong>Responsibilities<br><br></strong><ul><li> Ensure the availability and adequacy of all the Supervision Consultant’s (Engineer’s) and Contractors’ HSE<br><br></li></ul>provisions as per the requirements of this Policy, the Construction Contracts General Conditions and<br><br>Specifications, their HSE Plans, Employer’s HSE Requirements, and the applicable local/national and<br><br>international statutes, Regulations<br><br><ul><li> Measuring the HSE performance of the Supervision Consultant (Engineer) and Contractors and advise on the<br><br></li></ul>actions necessary for improvement.<br><br><ul><li> investigating direct and root/underlying causes of accidents/incidents and advising recommendations to<br><br></li></ul>prevent recurrence of the same<br><br><ul><li> Recording and following-up on any noted safety hazards and non-conformances to HSE regulators and parties<br><br></li></ul>having jurisdiction.<br><br><ul><li> Coordinating with the PMC Project Manager/Construction Manager in the implementation of effective HSE<br><br></li></ul>systems on their Projects sites.<br><br><ul><li> Liaison with the Employer, PMC (Hill International) and the Local/Enforcing Authorities / Municipality<br><br></li></ul>Authorities in ensuring adherence of all parties to the HSE Requirements of their Projects.<br><br><ul><li> Training and inducting staff on HSE.</li><li> Reviewing and approving Contractors’ HSE documents, submittals, drawings, etc to verify their suitability,<br><br></li></ul>adequacy and conformance.<br><br><ul><li> Ensuring the Supervision Consultant’s (Engineer’s) and Contractors’ full compliance with the Project HSE<br><br></li></ul>Requirements.<br><br><ul><li> Carrying-out scheduled and unscheduled HSE audits and inspections and reporting to the Project<br><br></li></ul>management team on any identified non-conformances for necessary action and correction by the violating<br><br>party.<br><br><ul><li> Informs themselves of the relevant Quality, Environmental, Safety and Occupational Health Policies, Manuals<br><br></li></ul>and Procedures within Hill International and ensures continued compliance with these requirements while<br><br>employed by Hill.<br><br><ul><li> Perform other duties as assigned by the line manager/supervisor.<br><br></li></ul><strong>Qualifications<br><br></strong><ul><li> A degree in engineering (or equivalent work experience) supplemented by relevant international certifications.</li><li> Minimum 10 years’ experience in large-scale projects.</li><li> Experience in managing all aspects of HSSE on projects or facilities.</li><li> Knowledge of HSSE sciences/engineering systems, principles and methodologies. Extensive and<br><br></li></ul>demonstrated knowledge of national and international HSSE laws/regulations and regulatory/resource<br><br>agencies permitting processes and responsibilities, industry standards for HSSE compliance and best<br><br>management practices for minimizing potential HSSE impacts during project execution. Knowledge of<br><br>technical terminology common to industrial hygiene, health physics, safety engineering, and environmental<br><br>compliance.<br><br><ul><li> Ability to deal effectively with HSSE matters with contractors/subcontractors or consultants during<br><br></li></ul>construction.<br><br><ul><li> Ability to prepare reports related to HSSE activities in the projects</li><li> Excellent English written and verbal communication skills. Excellent presentation skills.</li><li> Experience of working internationally (preference KSA experience).</li></ul>

<p>Conduct daily inspections of mechanical works for the renovation of a high-rise, five-star hotel. Ensure installations comply with approved drawings, specifications, method statements, Saudi Building Code, and applicable international standards. Inspect HVAC ductwork, supports, insulation, dampers, flexible connections, air terminals, and equipment connections. Inspect chilled-water piping, valves, insulation, pumps, AHUs, FCUs, and associated mechanical equipment. Verify acoustic insulation and vibration-control measures for guestrooms, suites, and public areas. Inspect domestic hot- and cold-water systems, drainage, vent piping, cleanouts, and plumbing fixtures. Verify drainage slopes, pipe routing, connections, and rough-in locations for guestrooms, kitchens, and public facilities. Inspect fire-fighting pipework, sprinkler heads, landing valves, hose reels, fire pumps, and related equipment. Witness hydrostatic and pressure testing of chilled-water, plumbing, drainage, and fire-fighting systems. Inspect approved materials and equipment upon delivery and verify their correct storage, protection, and installation. Review and respond to mechanical Requests for Inspection and maintain accurate supporting records. Identify defective or non-compliant work and initiate inspection comments or Non-Conformance Reports. Monitor corrective actions and reinspect completed rectification works. Coordinate inspections with the Mechanical Engineer, MEP team, contractor supervisors, and testing crews. Assist in witnessing flushing, cleaning, disinfection, air balancing, water balancing, and system commissioning. Maintain daily inspection reports, photographs, test results, and site observations. Support snagging, de-snagging, as-built verification, and final handover activities.</p><p><strong>Desired Candidate Profile</strong></p><div>Diploma or bachelor s degree in Mechanical Engineering or a related discipline. Valid Saudi Council of Engineers registration in the applicable Technician or Engineering category is mandatory. Minimum 12 years of mechanical inspection experience on building construction projects. Proven experience in high-rise buildings, five-star hotels, luxury hospitality projects, or major MEP renovations. Practical experience inspecting HVAC, chilled-water, plumbing, drainage, and fire-fighting systems. Experience with high-rise MEP retrofits, chilled-water plants, and brownfield renovation works. Strong knowledge of SMACNA, IPC, NFPA, Saudi Building Code, and applicable mechanical standards. Ability to interpret mechanical drawings, schematics, equipment schedules, specifications, and approved method statements. Experience witnessing pressure tests, flushing, disinfection, air balancing, water balancing, and commissioning activities. Familiarity with acoustic requirements and vibration-control measures for luxury hospitality projects. Previous experience working with an engineering consultancy or construction supervision consultant. Ability to prepare accurate inspection reports, NCRs, punch lists, and photographic records. Experience in Madinah Central Area or similarly congested and sensitive locations is preferred. Good written and spoken English is required; Arabic is an advantage.</div>

<p>Conduct daily inspections of civil and structural works for the renovation of a high-rise, five-star hotel.<br>Inspect selective demolition, temporary propping, concrete chipping, reinforcement preparation, and structural repair works.<br>Review and respond to civil and structural Requests for Inspection.<br>Inspect formwork, reinforcement, embedded items, concrete placement, curing, and finished concrete works.<br>Verify that civil works comply with approved drawings, specifications, method statements, and the Saudi Building Code.<br>Witness concrete sampling, cube testing, core extraction, pull-off testing, and other destructive and non-destructive tests.<br>Inspect concrete repairs, crack injection, grout application, repair mortars, CFRP bonding, and structural strengthening works.<br>Inspect below-grade, roof, bathroom, kitchen, and wet-area waterproofing.<br>Verify waterproofing surface preparation, membrane installation, protection layers, and flood testing.<br>Confirm that approved materials are used and properly stored, handled, and installed.<br>Identify defective or non-compliant work and immediately report it to the Civil/Structural Engineer.<br>Monitor corrective actions and reinspect completed rectification works.<br>Coordinate inspections with contractor representatives, surveyors, and independent testing laboratories.<br>Maintain daily inspection reports, photographic records, test results, and site observations.<br>Record contractor manpower, equipment, work locations, progress, and site constraints.<br>Assist with snagging, de-snagging, as-built verification, and final handover inspections.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma or bachelor s degree in Civil Engineering, Construction Technology, or a related discipline.<br>Valid Saudi Council of Engineers registration in the applicable Technician or Engineering category is mandatory.<br>Minimum 12 years of on-site civil and structural inspection experience.<br>Proven experience in high-rise buildings, major renovations, or structural rehabilitation projects.<br>Practical experience in selective demolition, concrete repair, reinforcement works, structural strengthening, and temporary propping.<br>Experience inspecting CFRP systems, grout injection, repair mortars, and waterproofing works.<br>Strong knowledge of concrete placement, testing, curing, repair, and quality-control procedures.<br>Familiarity with the Saudi Building Code and relevant ASTM and British Standards.<br>Ability to interpret civil and structural drawings, specifications, method statements, and inspection plans.<br>Previous experience working with an engineering consultancy or construction supervision consultant.<br>Ability to prepare accurate inspection reports, site records, and photographic documentation.<br>Experience coordinating with independent testing laboratories and witnessing construction-material tests.<br>Experience in Madinah Central Area or similarly congested and sensitive locations is preferred.<br>ACI Concrete Field Testing certification or an equivalent inspection qualification is preferred.<br>Good written and spoken English is required; Arabic is an advantage.</p>

<p><b>Key Responsibilities:</b></p><ul><li>Conduct daily inspections of electrical works for the renovation of a high-rise, five-star hotel.</li><li>Ensure installations comply with approved drawings, specifications, method statements, Saudi Electrical Code, SEC requirements, and hotel standards.</li><li>Inspect cable trays, conduits, trunking, cable pulling, terminations, labelling, and distribution-panel installations.</li><li>Verify the installation of low-voltage power distribution, lighting, small power, emergency power, earthing, and lightning-protection systems.</li><li>Inspect guestroom power outlets, decorative lighting, switches, sensors, dimming controls, and Guest Room Management System interfaces.</li><li>Inspect fire-alarm devices, manual call points, interface modules, sounders, emergency lighting, and illuminated exit signs.</li><li>Inspect ELV and low-current systems, including data, telephone, CCTV, access control, public address, IPTV, and related containment.</li><li>Verify that approved electrical materials and equipment are properly delivered, stored, protected, and installed.</li><li>Review and respond to electrical Requests for Inspection and maintain accurate supporting documentation.</li><li>Witness insulation-resistance, continuity, earth-resistance, functional, and related field tests.</li><li>Coordinate inspections with the Electrical Engineer, MEP team, contractors, and commissioning specialists.</li><li>Identify defective or non-compliant work and initiate inspection comments or Non-Conformance Reports.</li><li>Monitor corrective actions and reinspect completed rectification works.</li><li>Assist in witnessing testing, commissioning, energisation, and operational performance testing.</li><li>Maintain daily inspection reports, photographs, test results, and site observations.</li><li>Support snagging, de-snagging, as-built verification, and final handover activities.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Diploma or bachelor s degree in Electrical Engineering or a related discipline.</p><p>Valid Saudi Council of Engineers registration in the applicable Technician or Engineering category is mandatory.</p><p>Minimum 12 years of electrical site inspection experience on building construction projects.</p><p>Proven experience in high-rise buildings, five-star hotels, luxury hospitality projects, or major electrical renovation works.</p><p>Practical experience inspecting power distribution, lighting, emergency power, earthing, and electrical life-safety systems.</p><p>Strong experience with GRMS, fire alarm, and complex ELV and low-current systems.</p><p>Familiarity with the Saudi Building Code, Saudi Electrical Code, SEC requirements, NFPA standards, and applicable international codes.</p><p>Ability to interpret electrical drawings, single-line diagrams, panel schedules, specifications, and approved method statements.</p><p>Experience witnessing insulation-resistance, continuity, earth-resistance, and functional testing.</p><p>Previous experience working with an engineering consultancy or construction supervision consultant.</p><p>Ability to prepare accurate inspection reports, NCRs, punch lists, and photographic records.</p><p>Experience in Madinah Central Area or similarly congested and sensitive locations is preferred.</p><p>Good written and spoken English is required; Arabic is an advantage.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong><span>Key Responsibilities:</span></strong></p><br> <ul> <li><span>Conduct daily inspections of civil and structural works for the renovation of a high-rise, five-star hotel.</span></li> <li><span>Inspect selective demolition, temporary propping, concrete chipping, reinforcement preparation, and structural repair works.</span></li> <li><span>Review and respond to civil and structural Requests for Inspection.</span></li> <li><span>Inspect formwork, reinforcement, embedded items, concrete placement, curing, and finished concrete works.</span></li> <li><span>Verify that civil works comply with approved drawings, specifications, method statements, and the Saudi Building Code.</span></li> <li><span>Witness concrete sampling, cube testing, core extraction, pull-off testing, and other destructive and non-destructive tests.</span></li> <li><span>Inspect concrete repairs, crack injection, grout application, repair mortars, CFRP bonding, and structural strengthening works.</span></li> <li><span>Inspect below-grade, roof, bathroom, kitchen, and wet-area waterproofing.</span></li> <li><span>Verify waterproofing surface preparation, membrane installation, protection layers, and flood testing.</span></li> <li><span>Confirm that approved materials are used and properly stored, handled, and installed.</span></li> <li><span>Identify defective or non-compliant work and immediately report it to the Civil/Structural Engineer.</span></li> <li><span>Monitor corrective actions and reinspect completed rectification works.</span></li> <li><span>Coordinate inspections with contractor representatives, surveyors, and independent testing laboratories.</span></li> <li><span>Maintain daily inspection reports, photographic records, test results, and site observations.</span></li> <li><span>Record contractor manpower, equipment, work locations, progress, and site constraints.</span></li> <li><span>Assist with snagging, de-snagging, as-built verification, and final handover inspections.</span></li> </ul> <p><strong><span>Minimum Requirements:</span></strong></p><br> <ul> <li><span>Diploma or bachelor’s degree in Civil Engineering, Construction Technology, or a related discipline.</span></li> <li><span>Valid Saudi Council of Engineers registration in the applicable Technician or Engineering category is mandatory.</span></li> <li><span>Minimum 12 years of on-site civil and structural inspection experience.</span></li> <li><span>Proven experience in high-rise buildings, major renovations, or structural rehabilitation projects.</span></li> <li><span>Practical experience in selective demolition, concrete repair, reinforcement works, structural strengthening, and temporary propping.</span></li> <li><span>Experience inspecting CFRP systems, grout injection, repair mortars, and waterproofing works.</span></li> <li><span>Strong knowledge of concrete placement, testing, curing, repair, and quality-control procedures.</span></li> <li><span>Familiarity with the Saudi Building Code and relevant ASTM and British Standards.</span></li> <li><span>Ability to interpret civil and structural drawings, specifications, method statements, and inspection plans.</span></li> <li><span>Previous experience working with an engineering consultancy or construction supervision consultant.</span></li> <li><span>Ability to prepare accurate inspection reports, site records, and photographic documentation.</span></li> <li><span>Experience coordinating with independent testing laboratories and witnessing construction-material tests.</span></li> <li><span>Experience in Madinah Central Area or similarly congested and sensitive locations is preferred.</span></li> <li><span>ACI Concrete Field Testing certification or an equivalent inspection qualification is preferred.</span></li> <li><span>Good written and spoken English is required; Arabic is an advantage.</span></li> </ul> <br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About the Role</h3> <p style="margin:0 0 12px; ************;">AECOM is seeking a <strong style="font-weight:700;">Sustainability Engineer</strong> to join its team in Riyadh, Saudi Arabia. This full-time role focuses on driving sustainability initiatives and achieving environmental and operational excellence goals. The successful candidate will collaborate across departments to develop, implement, and monitor sustainable practices aligned with corporate strategy and regional objectives.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Conduct comprehensive environmental impact assessments and sustainability audits across operations and facilities.</li> <li style="margin:0 0 6px;">Develop and implement sustainability strategies and action plans to reduce carbon footprint, energy consumption, and waste generation.</li> <li style="margin:0 0 6px;">Analyze data and metrics to identify opportunities for process optimization and resource efficiency improvements.</li> <li style="margin:0 0 6px;">Design and oversee sustainability projects, including renewable energy initiatives, waste management programs, and water conservation efforts.</li> <li style="margin:0 0 6px;">Ensure compliance with environmental regulations, standards, and corporate sustainability policies.</li> <li style="margin:0 0 6px;">Prepare sustainability reports and documentation for internal stakeholders and external regulatory bodies.</li> <li style="margin:0 0 6px;">Collaborate with cross-functional teams to integrate sustainability considerations into business operations and decision-making processes.</li> <li style="margin:0 0 6px;">Research and evaluate emerging sustainable technologies and best practices for potential organizational adoption.</li> <li style="margin:0 0 6px;">Monitor and track key performance indicators (KPIs) related to sustainability goals and provide regular progress updates.</li> <li style="margin:0 0 6px;">Support the development of sustainability training and awareness programs for employees.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Qualifications and Experience</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;"><strong style="font-weight:700;">10 years of professional experience</strong> in sustainability engineering, environmental engineering, or a related field.</li> <li style="margin:0 0 6px;">Strong knowledge of environmental engineering principles, sustainability assessment methodologies, and regulatory compliance requirements.</li> <li style="margin:0 0 6px;">Proficiency in data analysis and the ability to interpret complex environmental metrics and sustainability performance indicators.</li> <li style="margin:0 0 6px;">Experience with sustainability reporting frameworks such as GRI (Global Reporting Initiative) or SASB (Sustainability Accounting Standards Board).</li> <li style="margin:0 0 6px;">Demonstrated expertise in life cycle assessment (LCA) and carbon footprint analysis.</li> <li style="margin:0 0 6px;">Familiarity with renewable energy systems, waste management practices, and circular economy principles.</li> <li style="margin:0 0 6px;">Project management skills with the ability to lead cross-functional initiatives and manage multiple priorities.</li> <li style="margin:0 0 6px;">Strong technical writing and communication skills for preparing reports and presenting findings to diverse audiences.</li> <li style="margin:0 0 6px;">Proficiency with sustainability analysis tools and software (such as energy modeling tools or GIS software).</li> <li style="margin:0 0 6px;">ISO 14001 certification or equivalent environmental management system knowledge (preferred).</li> <li style="margin:0 0 6px;">Knowledge of green building standards and certifications (LEED, BREEAM, or similar) is a plus.</li> <li style="margin:0 0 6px;">Familiarity with Saudi Arabia's Vision 2030 sustainability initiatives and regional environmental priorities (preferred).</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Required Skills</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Analytical mindset with strong problem-solving abilities and attention to detail.</li> <li style="margin:0 0 6px;">Collaborative approach with the ability to work effectively across organizational departments.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Work Environment</h3> <p style="margin:0 0 12px; ************;">This is a full-time position based in Riyadh, Saudi Arabia, requiring collaboration across various departments to achieve sustainability objectives.</p>

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About the Role</h3> <p style="margin:0 0 12px; ************;">Honeywell Technologies is seeking an <strong style="font-weight:700;">Application/Sys Sales Engineer I</strong> to join its team in Saudi Arabia. This full-time position is specifically for <strong style="font-weight:700;">fresh graduates who are Saudi Nationals only</strong>, with 0-1 years of professional experience. As a CX (Sales Support Specialist), you will contribute to shaping the customer experience strategy and driving initiatives focused on enhancing customer satisfaction and loyalty.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Role Purpose and Objectives</h3> <p style="margin:0 0 12px; ************;">This role is crucial for supporting technical requests from customers, optimizing customer experience programs, and driving business growth. The primary objectives include improving customer satisfaction, increasing revenue, fostering stronger cross-functional collaboration, and cultivating a customer-centric culture, all contributing to the long-term success and growth of the organization.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Design Support Responsibilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Interpret client requirements, building codes, and relevant fire safety standards to develop compliant, cost-effective, and robust Fire, Security, or Building Management System (BMS) solutions.</li> <li style="margin:0 0 6px;">Collaborate closely with clients, consultants, architects, and contractors throughout the design and project lifecycle to ensure alignment, technical accuracy, and timely delivery.</li> <li style="margin:0 0 6px;">Prepare detailed system architecture and bill of materials for Fire, Security, or BMS systems, including complimentary systems.</li> <li style="margin:0 0 6px;">Review project specifications, drawings, Bills of Quantities (BOQs), and client requirements.</li> <li style="margin:0 0 6px;">Prepare technical proposals for bids and tenders.</li> <li style="margin:0 0 6px;">Understand the competitive landscape and local industry practices for assigned systems and regions.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Application Engineering Responsibilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Conduct product demonstrations, Proof of Concepts (PoCs), presentations, and technical consultations.</li> <li style="margin:0 0 6px;">Obtain vendor quotations and evaluate technical and commercial compliance.</li> <li style="margin:0 0 6px;">Support project managers and installation teams by providing engineering input during procurement, construction, and commissioning phases.</li> <li style="margin:0 0 6px;">Develop products with enhancements and new product developments to increase product specifications and quality.</li> <li style="margin:0 0 6px;">Conduct technical reviews, design risk assessments, and site visits to resolve technical queries and verify installation quality as per design intent.</li> <li style="margin:0 0 6px;">Develop and implement customer-centric programs to enhance customer satisfaction and loyalty.</li> <li style="margin:0 0 6px;">Collaborate with cross-functional teams to drive customer-focused initiatives and ensure alignment with business goals.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Required Qualifications</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Bachelor’s degree in Engineering (Electrical, Computer, or a related field).</li> <li style="margin:0 0 6px;">Proficiency in AutoCAD and other design/drafting tools.</li> <li style="margin:0 0 6px;">Strong knowledge or familiarity with international standards such as NFPA, FM, UL, EN, IEC, and ATEX, as applicable.</li> <li style="margin:0 0 6px;">Ability to read and interpret technical drawings and specifications.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Essential Skills and Attributes</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Strong analytical, communication, and organizational skills.</li> <li style="margin:0 0 6px;">Ability to manage multiple tasks and meet deadlines effectively.</li> </ul>

<h3><strong>About the Opportunity</strong></h3><p>Hill International is seeking a <strong>Senior Mechanical Engineer (District Cooling)</strong> to join their team in the <strong>Dammam Region, Dammam</strong>. This full-time position involves overseeing the engineering design, review, and coordination of district cooling systems for a significant airport project. The role operates under the Project Management Consultant (PMC) framework, ensuring the delivery of efficient, reliable, and sustainable cooling solutions.</p><h3><strong>Role Context and Objectives</strong></h3><p>The primary objective of this role is to ensure that all district cooling solutions for the airport project are aligned with project requirements, international standards, and operational performance benchmarks. This involves a critical focus on delivering robust and sustainable cooling infrastructure, maintaining high standards of quality and efficiency throughout the project lifecycle.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Lead the design review and validation of district cooling systems, including chilled water plants, distribution networks, and energy transfer stations (ETS).</li><li>Ensure strict compliance with project specifications, international standards, and local authority regulations.</li><li>Coordinate effectively with MEP, structural, and architectural teams for seamless integration of district cooling systems within the overall project.</li><li>Review and approve technical submittals, shop drawings, method statements, and material specifications.</li><li>Oversee hydraulic calculations, cooling load assessments, and system optimization to achieve energy efficiency.</li><li>Provide expert technical guidance on plant equipment such as chillers, pumps, cooling towers, and control systems.</li><li>Identify potential design and operational risks and develop appropriate mitigation strategies.</li><li>Support value engineering initiatives aimed at optimizing cost, efficiency, and sustainability.</li><li>Participate in design coordination meetings and liaise with key stakeholders, including utility providers and operators.</li><li>Review testing and commissioning plans to verify that system performance meets the design intent.</li><li>Ensure adherence to Hill International’s Quality, Environmental, Safety, and Occupational Health policies and procedures.</li><li>Perform other duties as assigned by the Project Director or line manager.</li></ul><h3><strong>Required Qualifications and Experience</strong></h3><ul><li>A minimum of <strong>15 years of proven experience</strong> in mechanical engineering, specifically with district cooling systems.</li><li>Demonstrated experience in large-scale infrastructure or airport projects is essential.</li></ul><h3><strong>Essential Attributes</strong></h3><ul><li>Ability to perform effectively under pressure and manage tight deadlines.</li></ul><h3><strong>Commitment to Standards</strong></h3><p>Hill International is committed to maintaining the highest standards of Quality, Environmental, Safety, and Occupational Health. The successful candidate will play a crucial role in upholding these policies and procedures within the project scope, contributing to a safe and compliant work environment.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>About the Role</b></p><p>Jazan Integrated Gasification &amp; Power Company (JIGPC) is seeking a highly skilled <b>Protection Engineer</b> to join our Maintenance team. The successful candidate will be responsible for ensuring the reliability, compliance, testing, maintenance, and optimization of electrical protection systems supporting a large-scale industrial and power generation facility.</p><p>This role requires hands-on expertise in protective relays, fault analysis, relay testing, switchgear protection, and power system troubleshooting within power generation, utilities, oil &amp; gas, petrochemical, or heavy industrial environments.</p><p><br></p><p><b>Key Responsibilities</b></p><ul><li>Perform preventive, predictive, and corrective maintenance of electrical protection systems.</li><li>Test, calibrate, configure, and troubleshoot protective relays and associated equipment.</li><li>Conduct fault investigations, root cause analysis, and system performance evaluations.</li><li>Maintain and optimize protection schemes for transmission, distribution, and generation systems.</li><li>Support maintenance shutdowns, turnarounds, and plant upgrades.</li><li>Analyze protection events and disturbance records to improve system reliability.</li><li>Ensure compliance with company standards, safety requirements, and industry regulations.</li><li>Provide technical support to Operations, Maintenance, and Project teams.</li><li>Prepare maintenance reports, test records, and technical documentation.</li><li>Support continuous improvement initiatives related to electrical protection systems.</li></ul><p><br></p><p><b>Minimum Requirements</b></p><p><b>Education</b></p><ul><li>Bachelor's Degree in Electrical Engineering or related discipline.</li></ul><p><b>Experience</b></p><ul><li>10 years of experience in Electrical Protection Engineering.</li><li>Experience within Power Generation, Utilities, Oil &amp; Gas, Petrochemical, Energy, or Heavy Industrial facilities.</li><li>Hands-on experience with protection relays, relay testing, fault analysis, and electrical troubleshooting.</li></ul><p><br></p><p><b>Preferred Qualifications</b></p><ul><li>Master's Degree in Power Systems Engineering.</li><li>Certification in Protective Relaying (SEL, GE, Siemens, Beckwith, or equivalent).</li><li>NFPA 70E or other Electrical Safety Certification.</li><li>Experience with SAP PM or other CMMS systems.</li></ul><p><br></p><p><b>Apply now to be part of one of the Middle East's leading integrated gasification and power generation companies.</b></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Technical Skills</b></p><p>Candidates should have strong knowledge and experience in:</p><ul><li>Power System Protection</li><li>Protective Relays (SEL, Siemens, GE, MiCOM, Beckwith)</li><li>Overcurrent &amp; Earth Fault Protection</li><li>Transformer Differential Protection</li><li>Line Differential Protection</li><li>Generator Protection Systems</li><li>Motor Protection Systems</li><li>High Impedance Busbar Protection</li><li>Arc Flash Protection</li><li>Automatic Voltage Regulators (AVR)</li><li>Synchronizing Systems</li><li>HV, MV, and EHV Protection Schemes</li><li>Switchgear Protection Systems</li><li>Fault Analysis and Root Cause Investigation</li><li>Relay Testing and Commissioning</li></ul><p><br></p><p><b>Testing &amp; Software Experience</b></p><p>Experience with the following is highly desirable:</p><ul><li>Omicron Relay Testing Equipment</li><li>Megger Testing Equipment</li><li>SEL Software</li><li>Siemens DIGSI</li><li>GE Protection Systems</li><li>MiCOM Relay Software</li><li>Beckwith Relays</li><li>REG-DA</li><li>TAPCON</li></ul><p><br></p></div>