Air Conditioning Technician Jobs

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Job Purpose / Objective&nbsp; </strong></p><br> <p>Perform echocardiograms according to physician's orders and established practices and procedures by using non-invasive imaging technology to analyse a patient's heart, specifically the function of its veins, arteries, chambers, and valves.</p><br> <p><strong>Key Responsibilities / Accountabilities&nbsp;&nbsp; </strong></p><br> <ul> <li>Confers with cardiologist to establish requirements for non-standard examinations and determines technical factors to satisfy requirements.</li> <li>Prepares and mount ECG for interpretation by Cardiologist.</li> <li>Evaluates nature of critical and emergency procedures and rearranges patient priorities to accommodate them.</li> <li>Advises cardiologists of results of examination and provide preliminary diagnostic evaluation.</li> <li>Notifies cardiologist of significant scans necessitating immediate attention to patient.</li> <li>Assists and participate in ECHO and ECG procedure as per doctor’s order for both in patient or outpatient units.</li> <li>Assists in special procedures in the Cardiology department such as:<ul> <li>Echocardiogram<ul> <li>Dubutamine ECHO</li> <li>Stress ECHO</li> <li>Trans-esophageal ECHO</li> </ul></li> </ul></li> <li>Maintains a logbook of procedures done in the department procedures and prepare reports monthly statistical report.</li> <li>Applies HOLTER monitor to patients as per doctor’s order if nurse technician is busy.</li> <li>Helps to coordinate with patients for HOLTER monitoring or for HOLTER monitor.</li> <li>Reports directly to the Biomed through department in charge regarding any mechanical or electrical defect of equipment.</li> <li>Adheres to manufacturers routine for all equipment’s.</li> <li>Provides individualized patient / family education as per their needs.</li> <li>Organizes supplies in the unit.</li> <li>Adheres to dress code policy.</li> <li>Performs procedure within the infection control standards.</li> <li>Participates in person-centered care initiatives undertaken by HMG.</li> <li>Enriches patient experience with compassion, respect and dignity.</li> <li>Performs other applicable tasks and duties assigned with the realm of his/her knowledge, skills and abilities.</li> </ul><br><p><strong>Education/ Professional Qualification</strong></p><br> <p>Diploma or equivalent qualification i.e. cardiovascular technology or relevant </p><br> <p><strong>Experience </strong></p><br> <p>Minimum of one (1) year relevant experience&nbsp;</p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>Maintains service operations by inspecting and maintaining vehicles. Main duties include using tools to find any potential issues with someone s vehicle, explains problems with the car to the driver and performing maintenance on the car to fix it or prevent it from future breakdowns or issues.</p><p>Ensure that the job card is issued with details of the repair work to be carried out. Ensures that protective covers are used in all vehicles before carrying out any repairs. Should maintain accurate time recording (clocking on and off) for all repairs. Perform brakes, suspension, tire installation, scheduled maintenance, and all manner of automotive repairs and maintenance that you are qualified to perform Secure our guest's approval to perform the work because of the diagnosis, and always maintain a clean, neat work area Complete thorough automotive vehicle inspections on every vehicle you service, and perform any repairs and maintenance Test drive guest vehicles and use our shop truck in a safe manner to pick up inventory as needed Repair brake and steering systems. Diagnose and repair electrical and electronic systems. Replace or repair transmissions and fuel components as needed. Repair cooling components and the system, including air conditioners and engine cooling. Perform emissions inspections, safety checks, and similar state-regulated vehicle examinations. Maintain a clean, safe working environment. Produce legible and accurate paperwork reflecting work performed. Identify problems with vehicles using the diagnostic equipment. Explain automotive repairs and issues, and provide great customer service. Perform basic auto care and maintenance tasks such as oil changes, fluid level checks, and tire rotation. Repair and replace brake pads, wheel bearings, sensors, and other parts. Perform routine maintenance and general mechanic work on vehicles.</p><p><strong>Desired Candidate Profile</strong></p><p>KeyRequirements Ensure that the job card is issued with details of the repair work to be carried out. Ensures that protective covers are used in all vehicles before carrying out any repairs. Should maintain accurate time recording (clocking on and off) for all repairs. Perform brakes, suspension, tire installation, scheduled maintenance, and all manner of automotive repairs and maintenance that you are qualified to perform Secure our guest's approval to perform the work because of the diagnosis, and always maintain a clean, neat work area Complete thorough automotive vehicle inspections on every vehicle you service, and perform any repairs and maintenance Test drive guest vehicles and use our shop truck in a safe manner to pick up inventory as needed Repair brake and steering systems. Diagnose and repair electrical and electronic systems. Replace or repair transmissions and fuel components as needed. Repair cooling components and the system, including air conditioners and engine cooling. Perform emissions inspections, safety checks, and similar state-regulated vehicle examinations. Maintain a clean, safe working environment. Produce legible and accurate paperwork reflecting work performed. Identify problems with vehicles using the diagnostic equipment. Explain automotive repairs and issues, and provide great customer service. Perform basic auto care and maintenance tasks such as oil changes, fluid level checks, and tire rotation. Repair and replace brake pads, wheel bearings, sensors, and other parts. Perform routine maintenance and general mechanic work on vehicles. Prepared to get additional certification as needed. Willingness to learn with hands-on training. Help keep the repair shop clean and organized. Keep a professional appearance.</p>

Laboratory Technician Department: Laboratory Reports To: Laboratory Supervisor / Medical Director Job Location: Medical Centre Job Purpose To collect, process, and analyse patient specimens accurately and safely, ensuring reliable laboratory results and compliance with approved quality, infection-control, and patient-safety standard.<br>Key Responsibilities Collect blood and other clinical specimens using approved procedures. Verify patient identity and correctly label all specimens. Receive, register, process, store, and transport specimens appropriately. Perform laboratory tests in haematology, clinical chemistry, serology, urinalysis, microbiology, and other assigned sections within the authorised scope of practice. Operate, calibrate, clean, and maintain laboratory equipment. Conduct internal quality-control procedures and document the results. Identify abnormal or critical results and immediately report them to the responsible physician or laboratory supervisor. Ensure accurate entry, verification, and timely release of laboratory results. Maintain appropriate stock levels of reagents, consumables, and collection materials. Monitor reagent expiry dates and storage temperatures. Follow infection-control, biosafety, and biomedical-waste disposal procedures. Maintain complete laboratory records, logs, maintenance reports, and quality documents. Protect patient confidentiality and medical information. Participate in audits, proficiency testing, quality-improvement activities, and staff training. Report equipment malfunctions, incidents, errors, and specimen rejection issues promptly. Follow the medical centre’s policies and all applicable regulatory requirements. Perform any other laboratory-related duties assigned by the supervisor or management. Qualifications and Requirements<br>Nationality: Saudi Diploma or bachelor’s degree in Medical Laboratory Technology or a related field. Valid professional classification and registration with the Saudi Commission for Health Specialties (SCFHS). Previous clinical laboratory experience is preferred. Knowledge of laboratory equipment, quality-control procedures, and infection prevention. Good communication skills in Arabic and English.<br>Required Competencies Accuracy and attention to detail. Patient identification and specimen-handling skills. Technical laboratory competence. Professionalism and confidentiality. Time management and teamwork. Ability to work under pressure. Commitment to patient safety and continuous improvement.<br>Key Performance Indicators Accuracy of laboratory results. Specimen rejection and laboratory error rates. Compliance with quality-control requirements. Turnaround time for laboratory tests. Documentation completeness. Compliance with infection-control and safety standards. Patient and physician satisfaction.

Job Title: Smart Home Technician<br><br>Location: Kingdom of Saudi Arabia (On-site)<br><br>Department: Smart Homes<br><br>Job Summary<br><br>We are seeking a skilled and experienced Smart Home Technician . The ideal candidate<br><br>will have hands-on experience in installing, configuring, troubleshooting, and maintaining<br><br>Smart Home systems and devices. This is a technical field role suited for candidates with<br><br>practical expertise rather than a university-based engineering background.<br><br>The selected candidate will work directly on-site to support residential and/or commercial<br><br>Smart Home projects and ensure high-quality system functionality and customer<br><br>satisfaction.<br><br>Key Responsibilities<br><br> Install, configure, and commission Smart Home systems and devices Perform maintenance, troubleshooting, repairs, and upgrades of installed systems Integrate and support various Smart Home technologies including:Smart lighting systems Smart switches and controls Home automation platforms Smart security and surveillance systems Smart locks and access control Audio/video and entertainment integration Smart HVAC and environmental control systems Conduct site inspections and technical assessments before installation Diagnose and resolve technical issues efficiently Ensure installations meet quality, safety, and project standards Provide technical support and guidance to end users when required Coordinate with project teams and supervisors during execution Maintain accurate service reports and installation documentation Stay updated with emerging Smart Home technologies and industry practices<br><br>Requirements<br><br>Requirements<br><br>Education<br><br> Diploma in Electrical, Electronics, Automation, Telecommunications, or a related<br><br>technical field is preferred.<br><br> University degree is not mandatory<br><br>Experience<br><br> Minimum 3-5 years of relevant experience in Smart Home systems installation,<br><br>maintenance, or technical support.<br><br> Mandatory: Previous working experience in the Kingdom of Saudi Arabia (KSA) Proven hands-on experience with Smart Home technologies and integrated<br><br>systems.<br><br> Experience in residential or commercial automation projects is preferred<br><br>Technical Skills<br><br> Strong knowledge of Smart Home devices and automation systems Ability to read technical drawings and wiring diagrams Understanding of low-current systems and structured cabling Familiarity with networking fundamentals and device connectivity Experience with troubleshooting hardware and system integration issues Ability to use installation and maintenance tools safely and effectively<br><br>Candidate Profile<br><br> Strong problem-solving and troubleshooting skills Good communication and teamwork abilities Ability to work on-site and travel within KSA if required Professional, organized, and customer-oriented

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Senior Personnel Technician (Poultry) | Hail, Saudi Arabia</p><br><br> <br> <p><strong>About Almarai:</strong></p><br><br> <p>Founded in 1977, Almarai Company is the world’s largest vertically integrated dairy company and the largest food and beverage manufacturing and distribution company in MENA. Headquartered in Riyadh, Almarai Company is ranked as the number one FMCG Brand in the MENA region and the market leader in all its categories across GCC, Egypt, and Jordan.</p><br><br> <p>Over five decades of sustainable growth, Almarai has consistently provided nutritious and healthy products to consumers of all ages, driven by its core principle: “Quality you can trust.”</p><br><br> <p>Almarai has expanded its product range to include, in addition to dairy products, juices and beverages, baked goods, poultry, infant formula, dates, fish and seafood, and bottled water, under more than 20 brands such as Almarai, L’usine, 7DAYS, ALYOUM, Nuralac, Farm’s Select, Ice Leaf, Almira, Seama, Oska, IVAL, Almara Pro, Premier Chef, Bakemart, and others.</p><br><br> <p>Almarai currently employs over 43,000 Quality Makers, across the GCC, Egypt &amp; Jordan.</p><br><br> <p>In 2025, Almarai reported net income of SAR 2.4 billion on sales of SAR 22 billion.</p><br><br> <br> <p><strong>About the Role:</strong></p><br><br> <p>Under the direction of Reg. Personnel Manager, to perform a wide variety of responsible personnel and administration tasks in the processing and maintenance of personnel related documents in support of Poultry Payroll Function to ensure timely and accurate pay to employees in compliance with established policies and procedures.</p><br><br> <br> <p><strong>Requirements</strong>:</p><br><br> <p>Potential candidates must meet the requirements mentioned below:</p><br><br> <br> <ul> <li>Diploma in Human Resources, Business Administration, or a related field.</li> <li>0-1 experience in HR or administrative support.</li> <li>Good command of English.</li> <li>Strong communication and organizational skills.</li> <li>Proficiency in MS Office applications.</li> </ul> <br> <p>Almarai offers a competitive package, generous leave, medical coverage, discretionary bonus, training, and development etc.</p><br><br> <br> <p>This is a great opportunity to join a successful and expanding global business, offering an excellent remuneration and benefits package.</p><br><br> <br> <br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 1+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Senior Personnel Technician (Poultry) | Hail, Saudi Arabia</p><br><br> <br> <p><strong>About Almarai:</strong></p><br><br> <p>Founded in 1977, Almarai Company is the world’s largest vertically integrated dairy company and the largest food and beverage manufacturing and distribution company in MENA. Headquartered in Riyadh, Almarai Company is ranked as the number one FMCG Brand in the MENA region and the market leader in all its categories across GCC, Egypt, and Jordan.</p><br><br> <p>Over five decades of sustainable growth, Almarai has consistently provided nutritious and healthy products to consumers of all ages, driven by its core principle: “Quality you can trust.”</p><br><br> <p>Almarai has expanded its product range to include, in addition to dairy products, juices and beverages, baked goods, poultry, infant formula, dates, fish and seafood, and bottled water, under more than 20 brands such as Almarai, L’usine, 7DAYS, ALYOUM, Nuralac, Farm’s Select, Ice Leaf, Almira, Seama, Oska, IVAL, Almara Pro, Premier Chef, Bakemart, and others.</p><br><br> <p>Almarai currently employs over 43,000 Quality Makers, across the GCC, Egypt &amp; Jordan.</p><br><br> <p>In 2025, Almarai reported net income of SAR 2.4 billion on sales of SAR 22 billion.</p><br><br> <br> <p><strong>About the Role:</strong></p><br><br> <p>Under the direction of Reg. Personnel Manager, to perform a wide variety of responsible personnel and administration tasks in the processing and maintenance of personnel related documents in support of Poultry Payroll Function to ensure timely and accurate pay to employees in compliance with established policies and procedures.</p><br><br> <br> <p><strong>Requirements</strong>:</p><br><br> <p>Potential candidates must meet the requirements mentioned below:</p><br><br> <br> <ul> <li>Diploma in Human Resources, Business Administration, or a related field.</li> <li>0-1 experience in HR or administrative support.</li> <li>Good command of English.</li> <li>Strong communication and organizational skills.</li> <li>Proficiency in MS Office applications.</li> </ul> <br> <p>Almarai offers a competitive package, generous leave, medical coverage, discretionary bonus, training, and development etc.</p><br><br> <br> <p>This is a great opportunity to join a successful and expanding global business, offering an excellent remuneration and benefits package.</p><br><br> <br> <br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 1+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> We are looking for a talented and skilled Mechanical Technician in Ferro Silicon Plant to join our multicultural and diverse team in Kuwait. You will be responsible to perform preventive, corrective and breakdown maintenance on mechanical equipment to ensure safe, reliable and efficient operation of the Ferro Silicon Plant. Support equipment installation, commissioning and routine maintenance activities while maintaining the HSE requirement.<br><ul><li><span>Carry out preventive, predictive and corrective maintenance on all assigned mechanical equipment according to maintenance schedules</span> .</li><li><span>Maintain equipment including pumps, gearboxes, conveyors, blowers, hydraulic systems, cooling tower systems, valves, water or oil piping and other plant mechanical equipment.</span></li><li><span><span>Support the installation, inspection, alignment, testing and commissioning new equipment.</span></span></li><li><span><span><span>Conduct routine equipment inspections to identify abnormalities and recommend corrective actions before failure.</span></span></span></li><li><span><span><span>Complete maintenance work orders, inspection reports, and equipment history records accurately in SAP, supporting continuous improvement and equipment reliability initiatives.</span></span></span></li><li><span><span><span><span>Support RCA investigations and inspect critical spare parts to ensure equipment reliability, availability, and operational readiness.</span></span></span></span></li><li><span><span><span><span>Complete maintenance works orders, inspections reports, supporting continuous improvement initiatives.</span></span></span></span></li><li><span><span><span><span><span>Perform all maintenance activities in accordance with company HSE policies.</span></span></span></span></span></li></ul>Required Qualifications:<br><ul><li><span>Vocational/Technical Certificate or Diploma in Mechanical Engineering, Mechanical Maintenance, Industrial Maintenance, Utilities, or related discipline</span></li></ul>Preferred Qualifications:<br><ul><li><span>Vocational/Technical Certificate: Minimum 5 years of mechanical maintenance experience in ferro silicon, steel industry, or heavy industry operations.</span></li><li><span>Diploma: Minimum 3 years of mechanical maintenance experience in ferro silicon, steel industry, or heavy industry operations.</span></li></ul>Relevant experience may include:<br><ul><li><span>Experience performing mechanical maintenance, inspection, and troubleshooting of pumps, gearboxes, conveyors, blowers, hydraulic systems, cooling systems, piping, valves, and other industrial equipment.&nbsp;</span></li><li><span>Prior experience in ferroalloy plants, steel plants, smelters, cement plants, power plants, or similar continuous process industries.&nbsp;</span></li><li><span>Exposure to preventive, predictive,&nbsp;</span><span>corrective, breakdown, and shutdown maintenance activities in heavy industrial environments.</span>&nbsp;</li></ul>Job-Specific Skills:<br><ul><li><span>Knowledge of mechanical maintenance practices, including equipment inspection, alignment, installation, and troubleshooting.</span></li><li><span>Ability to perform preventive, predictive, corrective, and breakdown maintenance of mechanical equipment and systems.&nbsp;</span></li><li><span>Ability to inspect, maintain, and troubleshoot pumps, gearboxes, conveyors, blowers, hydraulic systems, cooling tower systems, valves, piping, and associated plant equipment.&nbsp;</span></li><li><span>Ability to support equipment installation, alignment, testing, commissioning, and maintenance activities.</span></li><li><span>Ability to identify equipment abnormalities, diagnose faults, and recommend corrective actions to improve equipment reliability and performance. - Ability to complete maintenance work orders, inspection reports, and equipment history records accurately.&nbsp;</span></li><li><span>Ability to support maintenance activities during breakdowns, shutdowns, and project execution activities.</span></li><li><span>Strong adherence to Safety Standards, SOPs, Lockout/Tagout (LOTO), permit-to-work requirements, and emergency procedures.&nbsp;</span></li><li><span>Strong coordination, communication, troubleshooting, and reporting skills.</span>&nbsp;</li></ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About Jumeirah</strong></span></p><br><p><span>Jumeirah, a global leader in luxury hospitality and a member of Dubai Holding,&nbsp;operates&nbsp;an exceptional portfolio of 29 properties across 11 countries in the Middle East, Europe, and Asia. In 1999, Jumeirah changed the face of luxury hospitality with the opening of the iconic Jumeirah Burj Al Arab and the brand is now renowned worldwide for its distinguished beachfront resorts, esteemed city&nbsp;hotels&nbsp;and exclusive residences. From the contemporary Maldivian island paradise at Jumeirah&nbsp;Olhahali&nbsp;Island to the art-inspired Jumeirah Capri Palace in Italy and the modern twist on a British classic at Jumeirah Carlton Tower in London, the brand has become synonymous with warm and generous service and the ability to craft distinctive and purposeful experiences that bring joy to guests from across the world. </span></p><br><p><span><strong>About Jumeirah Jabal Omar</strong></span></p><br><p><span>Located just minutes from Masjid Al Haram, Jumeirah Jabal Omar Makkah offers a seamless blend of comfort, connectivity, and Arabian hospitality in the heart of the Holy City. Spread across four towers, the hotel features a range of dining venues, retail outlets, a gym, executive&nbsp;lounge&nbsp;and meeting spaces. Guests can enjoy views of the Grand Mosque and a culinary offering that spans Mediterranean, Persian, Middle Eastern and Southeast Asian cuisines.</span>&nbsp;</p><br><p><span><strong>About the Job</strong></span></p><br><p>An opportunity has arisen for<strong> Room Care Technician –</strong> <strong>Engineering&nbsp;</strong>to join <strong>Jumeirah Jabal Omar</strong>.&nbsp;</p><br><p>The main duties and responsibilities of this role:</p><br><ul><li>Understand guestroom-related issues, take the necessary equipment and assess and fix problems efficiently.</li><li>Perform maintenance tasks in rooms, including electrical, furniture, and basic repair jobs.</li><li>Handle guests and team inquiries professionally and resolve room care complaints promptly.</li><li>Complete assigned work orders, room inspections, and document all tasks performed.</li><li>Choose the correct tools and parts from stores and maintain accurate usage logs.</li><li>Report observed room damages to supervisors and recommended appropriate solutions.<br>&nbsp;</li></ul><p><span><strong>About You</strong></span></p><br><p>The ideal candidate for this position will have the following experience and qualifications:</p><br><ul><li>1 – 2 years of experience in the same role with a luxury 5-star property.</li><li>Secondary education required; vocational certification and trade qualification preferred.&nbsp;</li><li>Strong technical skills in trade, basic computer literacy, and knowledge of safety and building systems.</li><li>Proficient in English, able to work independently and adapt to diverse environments.</li></ul><p><span><strong>About the Benefits</strong></span></p><br><p>We offer an attractive salary, paid in Saudi Riyals (SAR), the local currency of the KSA.</p><br><p>In addition, we offer generous F&amp;B benefits, reduced hotel rates across our properties globally, excellent leave and health care packages, flights home, and other employee benefits making the role attractive to high performers and any applicant looking for a career with one of the most luxurious brands in the hospitality industry.</p><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 1+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Job Summary:The jobholder will be part of the Operations organization for the Contract with the Ministry of Interior of Saudi Arabia, and will be placed in Riyadh, reporting hierarchically to the C295 MRO Manager. The jobholder, as part of the Maintenance Department, will have the following missions, responsibilities and main activities for the services performed in the Subsidiary<br>Responsibilities:Working as part of a team, specific duties will include the satisfactory performance of both scheduled and unscheduled maintenance in the PSS C295 fleet, within a Customer Services environment. Undertaking individually or as part of a team, aircraft maintenance, repair and inspection tasks, quality checks and the completion of documentation in accordance with Company and Customer procedures. Performing duties as assigned by the Team/Shift Leader, ensuring that all work is completed in a timely fashion and meets the delivery quality requirements of the ASL Maintenance Organization. Verify that the aircraft status regarding scheduled tasks and deferred items is updated, the aircraft condition is serviceable and sign the Release to Service of the aircraft, when applicable. Ensuring that all work performed is recorded on the appropriate paperwork and signed for on a progressive basis Ensuring the correct use and control of aircraft parts and materials. Checking every time before to start any maintenance activity tools/GSE´s for condition and expiration date and ensure their correct use. Checking every time before starting any maintenance activity the components and parts for conditions (damages, leaks etc.) and that the applicability of the documentation is correct Adhere to all company, regulatory and Health and Safety procedures<br>Key Competencies, Skills & Knowledge Areas:Negotiation level at English language (Technical & Aeronautical) Proven problem solving and decision-making skills Ability to work within a team Ability / flexibility to work and to adapt in different environments Highest standard in terms of quality, reliability and safety<br>Qualifications:FAA or EASA Part-66 B1/B2 licensed aircraft technician. ICAO licenses will also be considered C-295 Aircraft Maintenance Type Training Course, by approved Part 147<br>Experience:More than two (2) years of experience in C-295 aircraft maintenance in the last six (6) years. At least three (3) years of aeronautical experience

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> We are looking for a talented and skilled Electrical Technician in Ferro Silicon Plant to join our multicultural and diverse team in Kuwait. You will be responsible to perform preventive, corrective and breakdown maintenance on electrical equipment and systems to ensure safe, reliable and efficient operation of the plant. Support electrical installation, testing and maintenance activities while comply with HSE requirements.<br><ul><li><span>Perform preventive, predictive, and corrective maintenance on electrical equipment and systems. Inspect, diagnose, troubleshooting, repair, and replace faulty electrical components including motors, MCCs, transformers, switchgear, cables, lighting systems, and other plant electrical equipment to ensure equipment reliability and minimize downtime.</span></li><li><span><span>Support the installation, inspection, testing, energization, and commissioning of electrical equipment and systems. Verify equipment readiness and work closely with the Project, Operations, and Engineering teams.</span>&nbsp;</span></li><li><span><span>Conduct routine inspections and testing of electrical equipment to identify abnormalities and recommend corrective actions. Complete maintenance work orders, inspection reports, equipment history records, and maintenance documentation accurately while supporting continuous improvement initiatives to enhance equipment reliability and performance.</span>&nbsp;</span></li><li><span>Support RCA investigations, inspect critical electrical spare parts, and maintain accurate SAP records to ensure equipment reliability and operational readiness.</span> </li><li><span><span>Perform all electrical maintenance activities in accordance with company HSE policies, electrical safety standards, and isolation procedures. Maintain good housekeeping and work closely with Operations, Mechanical, and Project teams to ensure maintenance activities are carried out safely and efficiently.</span></span></li></ul>Required Qualifications:<br><ul><li>Vocational/Technical Certificate or Diploma in Electrical Engineering, Electrical Maintenance, Industrial Electrical Systems, Electronics, Instrumentation, or related discipline.</li></ul>Preferred Qualifications:<br><ul><li>Vocational/Technical Certificate: Minimum 5 years of electrical maintenance experience in ferro silicon, steel industry, or heavy industry operations.</li><li>Diploma: Minimum 3 years of electrical maintenance experience in ferro silicon, steel industry, or heavy<br>industry operations.</li></ul>Relevant experience may include:<br><ul><li>Experience in maintenance, inspection, and troubleshooting of motors, transformers, switchgear, MCCs, power distribution systems, and other industrial electrical equipment.</li><li>Prior experience in ferroalloy plants, steel plants, smelters, power plants, or similar continuous process industries.</li><li>Exposure to preventive, corrective, and breakdown maintenance in high-temperature industrial environments.</li></ul>Job-Specific Skills:<br><ul><li>Ability to perform preventive, corrective, and breakdown maintenance of electrical equipment and systems.</li><li>Ability to inspect, test, troubleshoot, and repair electrical equipment including motors, MCCs, transformers, switchgear, cables, and associated control systems.</li><li>Ability to support installation, commissioning, testing, and energization of electrical equipment and systems.</li><li>Ability to identify electrical abnormalities, analyze faults, and recommend corrective actions to improve equipment reliability.</li><li>Ability to maintain accurate maintenance records, inspection reports, work orders, and equipment history documentation.</li><li>Ability to use electrical testing instruments and tools safely and effectively.</li><li>Ability to support maintenance activities during breakdowns, shutdowns, and project execution activities.</li><li>Strong adherence to Safety Standards, SOPs, Lockout/Tagout (LOTO), electrical isolation procedures, and emergency procedures.</li><li>Strong coordination, communication, troubleshooting, and reporting skills.</li></ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Senior Analytical Instruments Technician<br>Responsibilities:Monitor and maintain PGNAA and XRF analyzers. Perform preventive maintenance, calibration, and troubleshooting of laboratory instruments. Conduct performance verification and ensure accuracy of analytical results. Coordinate maintenance and calibration activities with external service providers. Maintain calibration, maintenance, and quality records. Ensure compliance with ISO 9001 and ISO/IEC 17025 requirements. Manage reference materials and standard samples used in laboratory analysis.<br>Requirements:Diploma or Bachelor's degree in Chemistry, Instrumentation & Control, or related field.3–5 years' experience (Bachelor's) or 5–7 years' experience (Diploma). Experience with analytical laboratory instruments. Experience with PGNAA and XRF systems is preferred. Knowledge of ISO 9001 and ISO/IEC 17025. Experience in cement or industrial laboratories is preferred.<br>Keywords PGNAA | XRF | Analytical Instruments | Calibration | Instrumentation | Cement Laboratory | ISO 17025 | Quality Control Laboratory | Troubleshooting | Preventive Maintenance

Senior Analytical Instruments Technician<br>Responsibilities:Monitor and maintain PGNAA and XRF analyzers. Perform preventive maintenance, calibration, and troubleshooting of laboratory instruments. Conduct performance verification and ensure accuracy of analytical results. Coordinate maintenance and calibration activities with external service providers. Maintain calibration, maintenance, and quality records. Ensure compliance with ISO 9001 and ISO/IEC 17025 requirements. Manage reference materials and standard samples used in laboratory analysis.<br>Requirements:Diploma or Bachelor's degree in Chemistry, Instrumentation & Control, or related field.3–5 years' experience (Bachelor's) or 5–7 years' experience (Diploma). Experience with analytical laboratory instruments. Experience with PGNAA and XRF systems is preferred. Knowledge of ISO 9001 and ISO/IEC 17025. Experience in cement or industrial laboratories is preferred.<br>Keywords PGNAA | XRF | Analytical Instruments | Calibration | Instrumentation | Cement Laboratory | ISO 17025 | Quality Control Laboratory | Troubleshooting | Preventive Maintenance

To provide services to patients for whom he / she is responsible to the highest attainable standard of care within the resources of Dallah Hospital by performing radiological procedures at a technical level without supervision. Uses independent judgment and initiative to obtain the radiological studies for the prescribed examinations. Assumes responsibility for designated areas or procedures as scheduled by the supervisory staff.<br>Organizational Accountabilities:Ensure work is performed based on approved policies, processes, procedures, and instructions. Identify opportunities for continuous improvement of systems, processes and practices considering leading practices, cost reduction and productivity improvement. Ensure day-to-day activities are properly performed in line with policies and procedures. Follow-up on escalated cases/issues of subordinates to ensure they are closed efficiently and in a timely manner. Functional Accountabilities:Selects and operates appropriate equipment for each exam. Positions patients according to examinations requested. Selects appropriate technical factors for each patient. Produces images of acceptable film quality. Uses suitable working practices to ensure that all radiation protection and safety regulations are complied with Maintains correct attitude of professional conduct and conforms to all normal ethical relationships. Ensures examination rooms are always in a state of cleanliness and readiness. Reports all equipment malfunctions to the Chief Technician or designee. Assists in the emergency treatment of patients. Observes all infection control standards laid down in policy documents, particularly in respect to sterile procedures. Administer (under the direction and supervision of the radiologist) oral, rectal, and parenteral contrast media, including intravenous contrast media. Implements and coordinates policies and procedures to achieve the hospital’s goals and objectives in pursuit of Standards of Care, Quality / Performance Improvement. Participate in patient and family education to help patients and families to better understand and participate in their care and make well informed care decisions. Ultrasound:o Responsible for performing ultrasound procedures at technical level in closed coordination with the radiologists.o Assist the Radiologist during ultrasound examination.o Clean the ultrasound gel from the patient body after examination and portable X ray machine.<br>Requirements Knowledge and Experience:Essential: Minimum of two years post graduate/diploma practice in an acute care facility. Desirable: Practical experience in MRI/CT/Ultrasound/Angio for at least one year in an acute care facility Education and Certifications:Associate Degree or Diploma in Radiologic Technology or its equivalent from a recognized institute/college.

A Snapshot of Your Day:<br><br>As a Mechanical Technician on the Dammam Tooling Center (DTC) floor team, you will collaborate closely with the technical team to ensure the optimal performance of mechanical equipment and systems. Your role will involve installing, calibrating, and repairing various mechanical components while conducting quality assurance tests to maintain high operational standards.<br><br>How You’ll Make an Impact:<br><br>Assist mechanical engineers in developing technical solutions for mechanical devices and systems. Install, calibrate, and repair components of mechanical devices and systems. Fabricate and assemble new or modified mechanical components for machinery and equipment. Conduct quality assurance/control tests and procedures. Prepare inspection, inventory, and discrepancy reports. Support tooling control, storage, and operational readiness.<br><br><br>What You’ll Bring:<br><br>A Mechanical Diploma or higher technical qualification. Hands-on experience with various types of tooling, including standard, precision, and power tools. Familiarity with forklift operation and handling. Proficiency in reading, writing, and communicating in both English and Arabic. Experience in using digital applications for inventory management and database record keeping. Strong teamwork, collaboration, and communication skills.<br><br><br>About The Team<br><br>Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet.<br><br>Who is Siemens Energy?<br><br>At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation.<br><br>Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.<br><br>Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo<br><br>Our Commitment to Diversity<br><br>Lucky for us, we are not all the same. Through diversity we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character – no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences.<br><br>Rewards/Benefits:<br><br>Competitive Salary Package Targeted Bonus Opportunities to work on a variety of innovative projects<br><br><br>https://jobs.siemens-energy.com/jobs

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">Product Repair &amp; Modification Technician - Structures<p> </p> <p> </p> <p> <b>Company:</b> </p>Boeing Saudi Arabia Limited<p> </p> <p> </p> <p>At Boeing, we are all innovators on a mission to connect, protect, explore and inspire. From the sea bed to outer space, you ll learn and grow, contributing to work that shapes the world. Find your future with us.<br> </p> <p>An opportunity has become available to join Boeing Saudi Arabia as a Structural Modification technician.<br> </p> <p>This position is part of the on-site F-15 modification team, supporting upgrades of the RSAF F-15SA aircraft based at Dhahran. Working as part of four teams you will perform structural modifications utilizing engineering drawings and Technical Orders. We are offering an opportunity for you to join a team responsible for updating one of the worlds most operationally tasked fighters.<br> </p> <p> <b>Role Description:</b> </p> <p>You will perform structural modifications and assist in maintenance activities, fault diagnosis and disturbed system functional tests. You will work with peers to perform tasks associated with aircraft safe handling and maintenance. Candidates will be responsible to ensure established process adherence, accurate and timely work recording and contractual/regulatory compliance. </p> <p> </p> <p> <b>Responsibilities</b>: </p> <ul> <li> <p>Assembles, disassembles and/or structurally modifies systems by changing, removing, replacing, or upgrading aerospace vehicle components to implement change.</p> </li> <li> <p>Oversees/completes assembly/disassembly or overhaul.</p> </li> <li> <p>Configures aerospace vehicles and test equipment.</p> </li> <li> <p>Troubleshoots complex aircraft systems to isolate structural faults and repair faulty components within guidelines published in authorized maintenance documents.</p> </li> <li> <p>Performs validation/verification testing of systems and components.</p> </li> <li> <p>Documents procedures and established processes to ensure contractual and regulatory compliance.</p> </li> <li> <p>Inspects components and verifies repairs for flight worthiness requirements.</p> </li> </ul> <p> </p> <p> <b>What we are looking for:</b> </p> <ul> <li> <p>3+ years prior Mechanical/structural experience in a production or MRO facility is essential.</p> </li> <li> <p>Demonstrable proficiency in the interpretation of engineering drawings and technical data.</p> </li> <li> <p>1+ years of experience supporting military aircraft modifications.</p> </li> <li> <p>Strong communication skills (both written and oral).</p> </li> <li> <p>Working with limited supervision.</p> </li> <li> <p>Good organizational skills.</p> </li> <li> <p>A high level of written and verbal communication and interpersonal skills are required.</p> </li> <li> <p>Attention to detail. </p> </li> </ul> <p> </p> <p>Employer is willing to sponsor applicants for employment visa status</p> <p> </p> <p>Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.</p> <p> </p> <p>This requisition is for an international, locally hired position in Dharan, Saudi Arabia. Benefits and pay are determined at the local level and are not part of Boeing U.S.-based payroll and will commensurate with experience and qualifications and in accordance with applicable Saudi Arabia law. Employment is subject to the candidate's ability to satisfy all Saudi Arabia labor and immigration formalities.</p> <p> </p> <p> </p> <p> <b> <b> <b>Language Requirements:</b> </b> </b> </p> <p> </p>Not Applicable<p> </p> <p> </p> <p> <b>Education:</b> </p>Not Applicable<p> </p> <p> </p> <p> <b>Relocation:</b> </p>Relocation assistance is not a negotiable benefit for this position.<p> </p> <p> </p> <p> <b>Security Clearance:</b> </p>This position does not require a Security Clearance.<p> </p> <p> </p> <p> <b>Visa Sponsorship:</b> </p>Employer willing to sponsor applicants for employment visa status.<p> </p> <p> </p> <p> <b>Contingent Upon Award Program</b> </p>This position is not contingent upon program award<p> </p> <p> </p> <p> <b>Shift:</b> </p>Not a Shift Worker (Saudi Arabia)</div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p><p>Serves as the Aviation Maintenance Quality Control/Quality Assurance (QC/QA) Technical Inspector under the direction of the QC Manager. Responsibilities encompass the sign-off of all red X and circle red X conditions related to aircraft systems and components. Engages in technical inspection of specific airframe, powertrain, power-plant, armament, electrical, and avionics systems. Evaluates the need for Maintenance Test Flights (MTF) and Maintenance Operational Checks (MOC), providing inspection criteria interpretation to the maintenance staff. Utilizes common measuring tools, precision measuring gauges, and alignment fixtures (GFE). Assists the Customer in maintaining a current technical library and relevant aircraft forms and records. Collaborates with the Customer Weight and Balance (W&amp;B) technician to complete Weight and Balance records for all assigned aircraft, adhering to Customer directives and applicable manuals. Assumes the role of the site QC Data Analyst and the technical and compliance documentation administrator. Establishes maintenance quality control processes, procedures, standards, measures, and reports, supporting the maintenance program for all maintenance support activities. Prioritizes safety in all related operations and conducts maintenance and technical inspector training as required, inputting OJT training data into the learning management system database.</p><p>Performs quality technical inspection of aircraft, equipment, vehicles, aircraft components, parts, and systems (including avionics, electrical, instrument and armament) as required by functional assignment. Performs quality and safety inspections of on-site equipment and tools used in aircraft maintenance, vehicles, and equipment. Performs in-progress and final quality technical inspections during maintenance, repair, modification, rework, and overhaul of aircraft, aircraft components, and component parts. Inspects job procedural forms and maintenance forms used in the performance of aircraft maintenance, vehicle and equipment maintenance to assure compliance with approved methods and procedures. Assists in preparation, processing, and answering of Quality Deficiency Reports (QDRs). Assists in aircraft accident investigations, prepares estimated cost of damage reports as required. Establish the maintenance quality control processes, procedures, standards, measures, and reports in support of the maintenance program and in coordination with Supply Chain Management (SCM) activities. Directs inquires, investigations, and research analysis related to quality control maintenance processes and supporting maintenance activities, to the QC Manager. Ensures all quality control maintenance operations and related maintenance support activities are conducted in a safe manner. In coordination with the QC Manager, supports the Downed Aircraft Recovery Team (DART) processes and procedures. Conducts maintenance training and technical inspector training as required. Other tasks as directed by the QC Manager. Works within the maintenance quality control processes, procedures, and standards. Ensures all maintenance operations and related maintenance support activities are conducted in a safe manner. Supports, in coordination with the Maintenance Manager and Flight Operations Manager, the Downed Aircraft Recovery Team (DART) process and procedure. Performs within the broad guidelines of duties and responsibilities with significant choice of methods. Authority to select and implement goals and objectives within the execution of duties and responsibilities.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Associates degree required; Bachelor s degree preferred.</p><p>As a condition of employment in Saudi Arabia, all candidates must successfully complete the Saudi Ministry of Human Resources and Social Development s Qualification Verification Program (QVP) to ensure eligibility for visa processing and employment authorization.</p><p>Federal Aviation Administration (FAA) Inspector Authorization (IA) certificate.</p><p>FAA Airframe and Powerplant certificate.</p><p>Five (5) years experience maintaining specific or similar Mission Design Series (MDS).</p><p>Able to use the Automated Weight and Balance Software (AWBS).</p><p>Demonstrated knowledge and experience of rotary wing Aviation operations inclusive of maintenance, Aviation logistics, flight operations and training.</p><p>Army Aviation maintenance certification with rating in the AH-64 or UH-60 or MD500 Series Aircraft (Army Rotary Wing equivalent) or OH-58D desired.</p><p>FAA, A&amp;P certificate or Equivalent required.</p><p>Proficient in the use of computer-hosted interactive technical manuals, aircraft maintenance forms, and other aircraft related documentation.</p><p>Graduate of a US Military Aircraft Maintenance Course or civilian A&amp;P equivalent with a minimum of 5 years experience</p><p>Possess a valid U.S driver s license and Passport.</p><p>DD214 required for military experience.</p><p>Must be able to pass employment and deployment qualification requirements that include medical, drug testing, background checks, etc.</p><p>Previous experience in a leadership or supervisory role within a military maintenance unit.</p><p>Strong knowledge of military logistics procedures and regulations.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>1. Mechanical Maintenance and Repair Activities Perform planned preventive, predictive, corrective, and breakdown maintenance activities on assigned mechanical equipment.<br> Carry out daily inspections, running checks, and maintenance checklists in accordance with approved maintenance schedules.<br> Monitor the physical condition of equipment and report abnormalities, non-conformances, and developing defects to the Mechanical Maintenance Engineer.<br> Troubleshoot mechanical failures using approved tools, drawings, manuals, and diagnostic techniques to identify the cause and carry out necessary repairs.<br> Perform dismantling, inspection, cleaning, repair, replacement, reassembly, alignment, and functional testing of mechanical equipment and components.<br> Replace defective parts such as bearings, seals, gaskets, O-rings, gland packing, couplings, bolts, filters, strainers, belts, and lubrication-system components.<br> Perform adjustment, alignment, tightening, lubrication, greasing, oil top-up, oil changing, and cleaning activities in accordance with approved procedures.<br> Identify and report corrosion, cracks, leaks, overheating, vibration, abnormal noise, misalignment, loose bolts, damaged insulation, and other equipment defects.<br> Ensure the working area is clean, safe, and properly restored after completion of maintenance activities.<br> v Support maintenance, inspection, and repair of mechanical equipment including, but not limited to: Siemens 9000HL-Class gas turbine auxiliaries, including lube oil, hydraulic oil, fuel gas, inlet air, ventilation, and turning gear systems.<br> Steam turbine auxiliaries, including lube oil, gland steam, seal oil, condensate, cooling, and turning gear systems.<br> Heat Recovery Steam Generator (HRSG), including drums, valves, blowdown systems, expansion joints, and associated auxiliary equipment.<br> Pumps, including boiler feedwater pumps, condensate extraction pumps, closed cooling water pumps, service water pumps, fire water pumps, fuel oil pumps, chemical dosing pumps, and drainage pumps.<br> Compressors, blowers, fans, air handling units, ventilation fans, and instrument/service air compressor systems.<br> Valves, including gate, globe, check, control, safety Valves.<br> Water treatment, reverse osmosis, condensate polishing, chemical dosing, wastewater treatment, and other balance-of-plant mechanical equipment.<br> 2. Inspection, Testing, and Troubleshooting Conduct routine inspections and condition assessments of assigned mechanical equipment.<br> Use approved maintenance and diagnostic tools such as vibration meters, infrared thermometers, laser alignment tools, dial gauges, feeler gauges, torque wrenches, pressure gauges, vernier calipers, and micrometers.<br> Assist in vibration monitoring, alignment checks, bearing inspections, pump performance checks, valve testing, pressure testing, leak testing, and functional testing.<br> Record inspection findings, test readings, equipment condition, defects identified, and maintenance work completed.<br> Assist in identifying the root cause of equipment failures and support implementation of corrective actions.<br> Monitor repeated failures and report recommendations for repair, modification, replacement, or maintenance-plan improvement.<br> Support basic welding, fabrication, and workshop repair activities.<br> Participate in planned shutdowns, major outages, overhauls, commissioning activities, warranty works, and emergency repairs.<br> 3. Safety, Permit-to-Work, and Compliance Follow all applicable safety rules, permit-to-work requirements, lockout/tagout procedures, confined-space-entry requirements, lifting procedures, and site safety standards.<br> Verify that equipment is properly isolated, depressurized, drained, vented, cooled down, and released for maintenance before starting work.<br> Use required personal protective equipment, approved tools, lifting equipment, and safety devices at all times.<br> Participate in toolbox talks, risk assessments, safety observations, hazard reporting, audits, and incident investigations.<br> Immediately report unsafe conditions, leaks, damaged tools, lifting hazards, near misses, and incidents.<br> Follow environmental and waste-management requirements, including proper identification, handling, segregation, and disposal of waste materials.<br> Ensure maintenance work complies with approved site procedures, OEM requirements, quality standards, and EHS requirements.<br> 4. Documentation and CMMS Support Complete maintenance checklists, inspection sheets, work completion records, test reports, and defect reports accurately.<br> Provide clear feedback to the Mechanical Maintenance Engineer regarding work completed, materials used, defects found, and follow-up actions required.<br> Support work-order completion, man-hour recording, and equipment-history updates in the CMMS.<br> 5. Spare Parts, Tools, and Housekeeping Review assigned work orders and identify the required spare parts, consumables, tools, lifting equipment, and test instruments before starting work.<br> Check availability of spare parts and coordinate with the warehouse storekeeper for material collection and return.<br> Maintain mechanical hand tools, power tools, lifting tools, portable test instruments, and workshop equipment in good working condition.<br> Report shortages of spare parts, consumables, special tools, and defective equipment to the Mechanical Maintenance Engineer.<br> Maintain good housekeeping in workshops, equipment areas, stores, and maintenance locations.<br> 6. Coordination, Training, and Continuous Improvement Work closely with Mechanical Maintenance Engineers, Operations personnel, Electrical and I&amp;C teams, contractors, OEM representatives, and other site personnel.<br> Support Operations during equipment isolation, release for maintenance, testing, start-up, and return-to-service activities.<br> Assist other departments in troubleshooting and repair activities when required.<br> Support training and mentoring of junior technicians,, and newly joined maintenance personnel.<br> Participate in continuous-improvement initiatives, maintenance improvement programs, 5S activities, and hazard-reporting programs.<br> Education Mechanical Diploma, Mechanical Technology, or an equivalent discipline.<br> Mechanical trade certifications is preferred.<br> Training in rigging, lifting operations, Forklift operator, and safety courses is an advantage.<br> Experience Minimum 5 years of mechanical maintenance experience in a power plant, heavy industrial facility, oil and gas plant, desalination plant, petrochemical plant.<br> Combined cycle power plant experience is preferred.<br> Technical Knowledge Knowledge of mechanical systems used in combined cycle power plants.<br> Knowledge of gas turbines, steam turbines, HRSG systems, pumps, valves, compressors, fans, blowers, heat exchangers, filters, strainers, and piping systems.<br> Understanding of lube oil, hydraulic oil, fuel gas, fuel oil, cooling water, condensate, boiler feedwater, compressed air, and water-treatment systems.<br> Knowledge of rotating-equipment maintenance practices, including bearing inspection, lubrication, seal replacement, coupling alignment, and vibration awareness.<br> Familiarity with valve maintenance, including gland packing, seat leakage, Lapping, and basic valve overhaul activities.<br> Understanding of lifting and rigging, torque tightening, mechanical assembly, and use of lifting tools.<br> Knowledge of permit-to-work, lockout/tagout, confined-space entry, lifting operations, and general mechanical safety requirements.<br> Practical Skills Ability to use maintenance diagnostic tools such as vibration meters, infrared thermometers, pressure gauges, and tachometers.<br> Basic computer skills for CMMS andwork-order updates, maintenance records, and reporting.<br> Good working knowledge of written and spoken English.<br> Good communication, teamwork, and coordination skills.<br> Willingness to work during planned outages, emergency breakdowns, shift duties, and on-call assignments when required</span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><b>Requisition ID:<b>29060</b>&nbsp;&nbsp;</b></p><br> <p><b>Job Country:&nbsp; &nbsp;&nbsp;<b>Saudi Arabia (SA)</b>&nbsp;</b></p><br> <p><b>Job City:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;<b>Riyadh</b>&nbsp;&nbsp;</b></p><br> <p><span><span><b>&nbsp;Group overview:</b></span></span></p><br> <p><span><span><span>&nbsp; Headquartered in Riyadh, Saudi Arabia, we operate construction and manufacturing businesses, design &amp; development centers and a host of facilities in the Middle East and other countries.</span></span></span></p><br> <p><span><span><span>&nbsp;&nbsp;<b>alfanar is involved in:</b></span></span></span></p><br> <p><span><span><span>&nbsp; • Electrical, Electromechanical and Civil Engineering Construction</span></span></span></p><br> <p><span><span><span>&nbsp; • Manufacturing and Marketing Electrical Construction Products</span></span></span></p><br> <p><span><span><span>&nbsp; • Allied Engineering Services</span></span></span></p><br> <p><span><b><span><span>&nbsp;Our Main Divisions:</span></span></b></span></p><br> <p><span><span><span>&nbsp; • alfanar electric</span></span></span></p><br> <p><span><span><span>&nbsp; • alfanar Construction</span></span></span></p><br> <p><span><span><span>&nbsp; • alfanar Building Systems</span></span></span></p><br> <p><span><b><span><span>&nbsp;alfanar Construction</span></span></b></span></p><br> <p><span><span><span>&nbsp; alfanar Construction is classified as a Grade I contractor by the Contractors Classification Committee of the Government of Saudi Arabia.</span></span></span></p><br> <p><span><span><span>&nbsp; alfanar Construction is an Engineering, Procurement and Construction (EPC) company with a track record of consistent growth. We have emerged as a strong EPC contractor in the Energy, Infrastructure as well as Engineering Services sectors in Saudi Arabia.</span></span></span></p><br> <p><span><span><span>&nbsp; With the support of special purpose service units, alfanar Construction continuously strives to provide appropriate and timely solutions to clients, conforming to international standards.</span></span></span></p><br> <p><span><b><span><span>&nbsp;The core EPC activities of alfanar Construction are in the fields of:</span></span></b></span></p><br> <p><span><span><span>&nbsp; • Power and Water Projects</span></span></span></p><br> <p><span><span><span>&nbsp; • Transmission and Distribution Projects</span></span></span></p><br> <p><span><span><span>&nbsp; • Building Construction (Industrial &amp; Commercial) Projects</span></span></span></p><br> <p><span><span><span>&nbsp; • Electro-Mechanical projects</span></span></span></p><br> Job Purpose <br><br>Key Accountability Areas <br><ul> <li><span>Support start up, testing, and commissioning activities across DMF, UF, SWRO, BWRO, CEDI, GTMDO and chemical injection units.</span></li> <li><span>Support pipeline flushing, hydrotesting, and pre-commissioning activities.</span></li> <li><span>Monitor plant parameters, record operational data as per OEM guidelines.</span></li> <li><span>Perform routine inspections, troubleshooting, and maintenance of pumps and dosing systems.</span></li> <li><span>Assist in chemical preparation, dosing calibration, and system flushing.</span></li> <li><span>Carry out routine cleaning of strainers, cartridge filters, and dosing lines.</span></li> <li><span>Inspect pumps, vacuum pumps, blowers, valves, actuators, and instrumentation for proper operation.</span></li> <li><span>Monitor chemical storage levels and support safe unloading and transfer of chemicals.</span></li> <li><span>Perform backwashing, air scouring, and CIP activities for DMF, UF, and RO systems.</span></li> <li><span>Inspect and replace cartridge filters, check SDI/turbidity, and ensure pretreatment integrity</span></li> <li><span>Track critical process parameters and water parameters to ensure optimal operation of the plant to avoid any concerns of scaling &amp; fouling. </span></li> <li><span>Calibrate online conductivity/resistivity, pH, ORP, DO, CO₂, and flow/pressure instruments. Conduct routine grab sampling: conductivity, silica, DO &amp; Sodium and reconcile with online analyzers.</span></li> </ul><br><br>Role Accountability <br>Communicate effectively with peers and supervisors and show openness to directions and feedback. Use tools and machineries within efficient cost and time. Execute the operational activities as per delivery schedules and work instructions. Solve any related issues arise and escalate any complex operational problems. Implement the quality standards for products or processes or related activities. Execute the tasks as per work routines and instructions. Comply to related policy, procedures, and processes. Adhere to all Safety procedures and regulations<br><br>Academic Qualification <br>Diploma Degree in Mechanical Institue<br><br><br>Work Experience <br>6 to 10 Years<br><br><br>Technical / Functional Competencies <br>Quality Control<br>Safety<br>Troubleshooting<br>Communication<br>Multi-Tasking<br>Teamwork<br>Physically fit<br>Hand/Power Tool Proficiency<br>Equipment Maintenance<br>Quick learning<br>Adaptability<br><br><br><br><p>.</p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Description <br></p><br><p>We have an excellent opportunity with one of our reputed clients in <strong>Riyadh, Saudi Arabia</strong> for the position of <strong>Mechanical Technician</strong>.</p><br><br>Position Details:<ul><li><p><strong>Position:</strong> Mechanical Technician</p><br><br></li><li><p><strong>Location:</strong> Riyadh, Saudi Arabia</p><br><br></li><li><p><strong>Salary:</strong> SAR 4,500 [Gross - Inclusive of All Allowances (Food, Accomodation, Transportation) ]</p><br><br></li><li><p><strong>Contract Duration:</strong> 2 Years</p><br><br></li><li><p><strong>Working Hours:</strong> 8 Hours/Day, 6 Days/Week</p><br><br></li><li><p><strong>Overtime:</strong> Applicable</p><br><br></li><li><p><strong>Interview Mode:</strong> Online</p><br><br></li></ul>Job Requirements:<ul><li><p>Diploma in Mechanical Engineering.</p><br><br></li><li><p>Minimum <strong>5 years of experience</strong> in the maintenance of <strong>plastic/polymer processing equipment</strong>.</p><br><br></li><li><p>Hands-on experience with:</p><br><br><ul><li><p>Extruders</p><br><br></li><li><p>Injection Molding Machines</p><br><br></li><li><p>Blow Molding Machines</p><br><br></li><li><p>Film Lines (Blown/Cast Film)</p><br><br></li><li><p>Compounding &amp; Pelletizing Systems</p><br><br></li><li><p>Hydraulics &amp; Pneumatics</p><br><br></li><li><p>Rotating Equipment &amp; Power Transmission</p><br><br></li></ul></li><li><p>Experience in <strong>Petrochemical, Polymer Processing, Plastic Manufacturing, or Compounding &amp; Extrusion Plants</strong> is Must.</p><br><br></li><li><p>Good English communication skills.</p><br><br></li></ul>Selection Process:<ol><li><p>CV Shortlisting</p><br><br></li><li><p>Online Interview with the Client</p><br><br></li><li><p>Final Selection &amp; Offer</p><br><br></li></ol><br><p>We look forward to hearing from you.</p><br><br>Requirements <br><ul><li><p>Experience in <strong>Petrochemical, Polymer Processing, Plastic Manufacturing, or Compounding &amp; Extrusion Plants</strong> is Must</p><br><br></li></ul><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Designer – Mechanical / HVACKey Responsibilities:Prepare accurate 2D & 3D layouts and engineering drawings for HVAC products using Auto CAD. Develop and update drawings based on engineering specifications, production requirements, testing, and field feedback. Coordinate with Product Engineers to ensure design accuracy, functionality, and correct BOMs. Prepare drawings for CNC manufacturing, including DXF files, panels, components, and assemblies. Support design standardization, cost reduction, material optimization, and improvement of manufacturing efficiency. Perform basic engineering calculations and apply relevant engineering standards, tolerances, and material properties. Maintain drawing revisions, part numbering, documentation, and project traceability. Provide technical drawing support to Engineering, Production, Quality, and Purchasing teams. Key Requirements:Diploma in Mechanical Engineering / Mechanical Drafting. Minimum 3-5 years of experience, including at least 2 years in HVAC/Air Conditioning Unit Design. Strong proficiency in Auto CAD; experience with 3D design software is an advantage. Knowledge of 2D/3D drawings and DXF files for CNC machines. Good understanding of engineering standards, dimensions, tolerances, and materials. Good English communication skills. Detail-oriented, analytical, innovative, and a strong team player.