Optometrist Jobs - Jeddah Saudi

Job Description: Mechanical Technician Job Title: Mechanical Technician Job Purpose:Perform preventive and corrective maintenance of mechanical equipment and systems at the wastewater treatment plant to ensure reliable operation, minimize equipment downtime, maintain asset integrity, and comply with health, safety, and environmental (HSE) standards. Key Responsibilities:Perform preventive and corrective maintenance activities in accordance with approved maintenance schedules. Operate, inspect, and maintain pumps, motors, valves, sludge handling systems, piping systems, and other mechanical equipment within the wastewater treatment plant. Conduct routine inspections to verify equipment reliability and identify abnormal operating conditions. Diagnose mechanical failures, perform repairs, and replace defective components as required. Carry out equipment disassembly, assembly, alignment, and installation activities. Assist in the maintenance of aeration equipment, mixers, conveyors, rotating equipment, and other mechanical systems. Perform lubrication activities and monitor lubricant levels in accordance with manufacturers' recommendations. Record maintenance activities, equipment history, and repair details using the organization's maintenance documentation or CMMS. Comply with Health, Safety, and Environmental (HSE) policies, procedures, and permit-to-work requirements while performing maintenance activities. Maintain a clean, safe, and organized work area and ensure proper use of tools and equipment. Coordinate with Operations, Electrical, and Instrumentation teams to ensure continuous and efficient plant operation. Participate in scheduled shutdowns, emergency maintenance, and plant commissioning activities when required. Perform any other related duties assigned by the direct supervisor. Qualifications:Diploma in Mechanical Engineering, Mechanical Technology, or a related technical discipline. Experience:Previous experience in the operation and maintenance of wastewater treatment plants, water treatment plants, or industrial facilities is preferred. Required Skills:Knowledge of mechanical equipment commonly used in wastewater treatment plants. Ability to read and interpret mechanical drawings, manuals, and maintenance procedures. Strong troubleshooting and mechanical repair skills. Proficiency in using mechanical tools, measuring instruments, and maintenance equipment. Understanding of preventive and corrective maintenance practices. Commitment to Health, Safety, and Environmental (HSE) requirements. Ability to work effectively within a team and on shift schedules when required.

APICO – Arabian Plastic Industrial Co. is looking for a qualified Mechanical Technician to join our Maintenance team in Jeddah. Key Responsibilities:Inspect, repair, and maintain mechanical systems, machinery, and production equipment. Perform preventive maintenance to minimize equipment breakdowns. Troubleshoot and resolve mechanical faults. Install new machines, components, and mechanical systems. Align and calibrate mechanical parts, including shafts, bearings, and gears. Ensure maintenance activities comply with safety and quality standards. Maintain accurate records of repairs, spare parts, and maintenance history. Coordinate with electrical and automation teams to resolve complex technical issues. Requirements:Diploma in Mechanical Engineering, Industrial Maintenance, or equivalent.2–4 years of experience in mechanical maintenance, preferably within a manufacturing or industrial environment. Strong knowledge of hydraulic, pneumatic, and rotating equipment. Ability to read and interpret mechanical drawings and manuals. Skilled in using hand tools, power tools, and precision instruments. Strong troubleshooting and problem-solving skills. Knowledge of mechanical maintenance safety procedures. Arabic & English language skills are preferred. Location: Jeddah, Saudi Arabia Employment Type: Full-time | On-site

Qualifications & Experience Saudi Education: Bachelor’s Biology, Microbiology, Food Sciences. Experience: Fresh Graduate. Skills: MS Excel Language: English, Arabic<br>Key Responsibilities:Perform laboratory tests per the defined lab methods if needed, to support Lab Technician. Report the process control related issues to superior to take the required action. Perform samples preparations as per sampling plan for weight analysis and packaging integrity tests. Refill hygiene and sanitation paraphernalia, dispensers and disinfectant in Tetra production hall. Keep the HOLD AREA clean and segregate the products in questions received through NCR, Customer Complaints and Out of Specs. Keep the General Laboratory and its facilities clean to ensure that cleanliness is maintained as per the daily GLP checklist. Act as a custodian to GMP practices and ensure that these are being followed in order achieve set targets for audits. Perform routine tests controls for the product quality parameters to achieve full compliance with approved standards. Carry out additional relevant tasks as advised by the direct supervisor. Follow all BCR safety instructions and procedures and report any safety hazards or near misses immediately to the safety officer.

Are you an IRATA Level 1 or Level 2 Certified Rope Access Technician looking for your next opportunity in Saudi Arabia?<br>Join a prestigious project at Aramco Stadium and become part of a team committed to delivering excellence while maintaining the highest safety standards.<br>Location: Aramco Stadium, Saudi Arabia Job Code: RAT-39<br>Vacancies: 10 Positions Contract: 3 Months (Extendable)<br>What You'll DoPerform rope access work in accordance with IRATA standards. Support inspection, maintenance, installation, and construction activities at height. Conduct equipment inspections and ensure all gear is safe and compliant. Follow HSE procedures, risk assessments, and permit-to-work requirements. Work collaboratively with the rope access team while maintaining the highest safety standards. Report hazards, unsafe conditions, and equipment defects promptly.<br>Requirements Valid IRATA Level 1 or Level 2 Certification Experience in rope access within construction, industrial, or oil & gas projects Strong understanding of safe working practices at height Physically fit and medically capable of performing rope access duties Immediate joiners are highly preferred<br> How to Apply<br>Send your updated CV along with your IRATA Certificate to:deepika.m@kpb.ae

Saudi Arabia ( Jeddah )<br><br>08/06/2026 10:06 AM<br><br>Irrigation Technician<br><br>Job Code: JB00111267<br><br>Easy application process, usually takes less than 1 minutes.<br><br>This opportunity is exclusively open to India candidates.<br><br>New Posted on - 08/06/2026 10:06 AM<br><br>Job Requirement<br><br>Position<br><br>Irrigation Technician<br><br>Industry<br><br>Dockyard / Port<br><br>Qualification<br><br>Diploma, I. T. I.<br><br>Qualification Specialization<br><br>Others<br><br>Job Location<br><br>Saudi Arabia ( Jeddah )<br><br>Experience<br><br>5 - 8 yrs<br><br>Yearly Salary<br><br>Negotiable in SAR<br><br>key skills<br><br>Irrigation System Installation Irrigation System Repair Piping and Tubing Skills, Valve Operation, Water Flow Management, Soil Type Analysis, Pump Operation, Sprinkler Head Adjustment, System Design, Electrical Wiring, Pressure Regulation<br><br>Job Description<br><br>Job Title<br><br>Irrigation Technician<br><br>Description<br><br>RED SEA GLOBAL – REQUIRED FOR SAUDI ARABIA<br><br>(NURSERY DIVISION)<br><br>IRRIGATION TECHNICIAN - 10 NOS<br><br>Candidates should have 5+ Yrs. experience in relevant field.<br><br>Attractive Salary, Free Food, Accommodation, Transportation + OT Provided by company.<br><br>SHORTLISTING FROM 07TH JUNE TO 12TH JUNE 2026<br><br>ONLINE / VIRTUAL INTERVIEW SHORTLY<br><br>08.06.2026<br><br>Interview Details<br><br>Not Available<br><br>Company Profile : ASMACS<br><br>ASMACS’ global network and the infrastructure facilities spread across the Indian Sub-continent and Arabian Gulf Region play a dominant role in the growth of ASMACS Group business.<br><br>Company Address<br><br>411, Sai Chamber, 4th Floor, Opp. Railway Station, Santacruz (E), Mumbai - 400 055, India Tel.:+91 22 26125301 / 26125191 26185509/26150933 / 26180997 Fax: +91 22 26147103 / 26146937 Email: asmacs@asmacs.net<br><br>Skills: NA

Oracle Overseas is looking for Mechanical Maintenance Technician Job Description / Responsibility A Mechanical Maintenance Technician in a plastics factory diagnoses, repairs, and maintains production machinery (like extruders, injection molders) and support systems (conveyors, hydraulics, pneumatics), focusing on preventive maintenance, troubleshooting faults, reading schematics, fabricating parts, and ensuring safety to maximize uptime and production quality. Core Responsibilities Troubleshooting & Repair: Diagnose and fix mechanical, electrical, pneumatic, and hydraulic issues on molding machines, grinders, and packaging equipment. Preventive Maintenance (PM): Conduct scheduled inspections and PM tasks to prevent breakdowns and maintain optimal equipment performance. Installation & Setup: Assist in installing, aligning, and setting up new production machinery and supporting systems. System Operation: Operate hand/power tools, read blueprints/schematics, and use diagnostic equipment. Documentation: Maintain detailed records of repairs, maintenance, and parts usage. Safety & Housekeeping: Adhere to safety protocols (like lockout/tagout) and keep the work area clean and organized. Employment Status Full Time Workplace Work at office Educational Requirements Diploma in Mechanical Experience Requirements At least 2 year(s) The applicants should have experience in the following business area(s):Plastic/ Polymer Industry Freshers are also encouraged to apply. Additional Requirements A Mechanical Maintenance Technician for a plastics factory needs strong skills in hydraulics, pneumatics, and electrical systems, with experience on injection molding/extrusion machines, plus the ability to read diagrams, troubleshoot effectively, and perform preventative maintenance, often requiring a relevant mechanical qualification and 3-5+ years of industrial experience. Key requirements include troubleshooting injection molding/extrusion, understanding mold maintenance, working with PLC controls (sometimes), managing safety protocols, and strong problem-solving. Core Technical Skills Machinery Expertise: Specific experience with injection molding, extrusion, blow molding, or thermoforming machines is crucial, including tooling (molds, dies, fixtures). Hydraulics & Pneumatics: Strong knowledge and repair skills for these systems, common in plastic machinery. Electrical/Electronic: Understanding electrical circuits, PLCs (Programmable Logic Controllers), and variable frequency drives (VFDs). Mechanical Aptitude: Proficient in mechanical repairs, alignments, and preventive maintenance (PM). Diagnostic Tools: Ability to use multimeters, pressure gauges, and other diagnostic equipment. Essential Knowledge & Abilities Troubleshooting: Excellent fault-finding and problem-solving for mechanical, hydraulic, pneumatic, and electrical issues. Technical Documentation: Ability to read and interpret mechanical/electrical drawings, manuals, and schematics. Preventive Maintenance (PM): Planning and executing routine inspections and servicing. Safety: Strict adherence to industrial safety standards (LOTO, PPE) Computer Skills: Basic PC skills for maintenance software or data logging. Qualifications & Experience Education: Diploma in Mechanical/Electrical Engineering or relevant trade certification (e.g., NVQ, T-Level). Experience: 3-5+ years in industrial maintenance, ideally in plastics, packaging, or related manufacturing. Soft Skills Strong communication and team work. Self-motivated and proactive. Ability to work under pressure and manage time effectively. Essential Skills & Activities Hands-on Repair: Replacing worn parts, repairing hoses, valves, wiring. Fabrication: Using welding or machining to create or modify parts. Collaboration: Working with production, engineers, and other technicians. Problem Solving: Identifying root causes of recurring failures. Adjustments: Calibrating machinery settings for quality and efficiency. Job Location Saudi Arabia Salary Tk. 48000 - 72000 (Monthly)

The Civil Technician performs a variety of skilled and semi-skilled tasks related to the inspection, maintenance, repair, and construction of civil infrastructure and facilities. The role provides technical support to operations and project teams, ensuring that civil works are executed in accordance with project specifications, quality standards, and safety requirements.<br><br>Key Responsibilities:Assist in the inspection, maintenance, and repair of civil structures, facilities, and infrastructure Support construction and maintenance activities, ensuring compliance with approved drawings and specifications Monitor site activities and report any structural or operational issues Ensure compliance with health, safety, and environmental requirements Coordinate with other departments and contractors as required to support project execution Assist in planning and monitoring maintenance schedules and civil work activities Maintain accurate records of inspections, maintenance activities, and project progress Participate in troubleshooting site-related issues and identifying corrective action<br>s<br>Knowledge & Skill Knowledge of civil construction methods, materials, and maintenance practices Understanding of statutory regulations and Health & Safety requirements Basic problem-solving and troubleshooting skills Basic Root Cause Analysis Ability to read and interpret civil drawings and technical documents Good communication and teamwork skills Familiarity with quality standards and site inspection procedures Education Diploma in Civil Engineering or any related technical qualification Fresh graduates are encouraged to app<br>ly

Job Title: Quality Control Lab Technician Location: Riyadh, Saudi Arabia (Onsite – Full Time) Nationality: Any nationality currently based in Saudi Arabia<br>Key Responsibilities Perform physical, functional, and dimensional testing of raw materials, in-process products, and finished medical devices in accordance with SOPs and ISO 13485 requirements. Conduct sterility, packaging integrity, and related laboratory evaluations where applicable. Accurately document test results in laboratory records, LIMS, or ERP systems. Prepare test reports and report any non-conformities to the QA team. Operate, calibrate, and maintain laboratory instruments and testing equipment. Ensure compliance with Good Laboratory Practices (GLP) and quality system procedures. Support internal audits by maintaining proper laboratory documentation and records. Assist in investigations, root cause analysis, and corrective actions related to product deviations. Participate in continuous improvement initiatives and test method validations. Support and guide junior laboratory staff when required.<br>Requirements2–4 years of experience in a medical device quality control laboratory. Diploma or Bachelor’s degree in Laboratory Science, Biotechnology, Chemistry, or a related field. Strong knowledge of laboratory testing, equipment handling, and quality documentation practices. Familiarity with ISO 13485 and medical device quality requirements is preferred.

The Civil Technician performs a variety of skilled and semi-skilled tasks related to the inspection, maintenance, repair, and construction of civil infrastructure and facilities. The role provides technical support to operations and project teams, ensuring that civil works are executed in accordance with project specifications, quality standards, and safety requirements.<br><br>Key Responsibilities:<br>Assist in the inspection, maintenance, and repair of civil structures, facilities, and infrastructure Support construction and maintenance activities, ensuring compliance with approved drawings and specifications Monitor site activities and report any structural or operational issues Ensure compliance with health, safety, and environmental requirements Coordinate with other departments and contractors as required to support project execution Assist in planning and monitoring maintenance schedules and civil work activities Maintain accurate records of inspections, maintenance activities, and project progress Participate in troubleshooting site-related issues and identifying corrective actions<br> Knowledge & Skill Knowledge of civil construction methods, materials, and maintenance practices Understanding of statutory regulations and Health & Safety requirements Basic problem-solving and troubleshooting skills Basic Root Cause Analysis Ability to read and interpret civil drawings and technical documents Good communication and teamwork skills Familiarity with quality standards and site inspection procedures Education Diploma in Civil Engineering or any related technical qualification Fresh graduates are encouraged to apply

Maintenance Technician (Filling & Process) – Al Safi Danone (ASD) Location: Al Kharj Department: Manufacturing – Maintenance<br>Role Summary:The Maintenance Technician is responsible for maintaining filling, packaging, and dairy process equipment through effective preventive and corrective maintenance activities. The role focuses on troubleshooting equipment failures, restoring operational performance, supporting production reliability, ensuring compliance with safety and quality standards, and maximizing equipment availability across manufacturing operations.<br>Key Accountabilities:Safety & Work Environment Maintain a safe and healthy work environment by strictly following safety standards, procedures, and site regulations. Ensure compliance with safety, quality, and operational policies at all times.<br>Maintenance Operations Perform preventive and corrective maintenance activities on filling, packaging, and dairy process equipment. Diagnose equipment faults and carry out repairs, replacements, and adjustments as required. Ensure equipment reliability and minimize downtime through effective maintenance practices.<br>Troubleshooting & Problem Solving Identify root causes of equipment failures and implement corrective actions. Support production teams in resolving technical issues affecting operations. Assist in improving equipment performance and reliability through effective troubleshooting techniques.<br>Performance & Planning Execute maintenance work orders according to maintenance schedules and priorities. Support maintenance planning activities and ensure timely completion of assigned tasks. Monitor equipment performance and contribute to improving operational efficiency.<br>Spare Parts & Resource Management Ensure proper utilization of maintenance tools, materials, and resources. Support spare parts monitoring and report shortages when required. Assist in maintaining accurate maintenance records and documentation.<br>Continuous Improvement Identify opportunities to improve maintenance processes and equipment performance. Support initiatives that enhance operational efficiency, equipment reliability, and cost control. Contribute to continuous improvement programs within the maintenance department.<br><br>Job Requirements Diploma in Mechanical, Electrical, Automation Engineering, or related technical field.3–5 years of maintenance experience in Dairy, FMCG, Food & Beverage, or Manufacturing industries. Experience in filling equipment, dairy process equipment, or both. Knowledge of preventive and corrective maintenance practices. Strong troubleshooting skills in mechanical and electrical systems. Experience working with automated production equipment. Strong knowledge of dairy manufacturing operations is preferred. Good English communication skills.<br>Join Al Safi Danone and be part of a company committed to excellence, innovation, and continuous growth. Together, we make a difference in delivering quality products that touch people’s lives every day.

Company Description <br>Stafflethes is an international staffing firm headquartered in India, providing recruitment and outsourcing solutions across sectors such as Aviation, Construction, Engineering, and Finance. The company supports clients across the EU, UK, USA, Asia & Middle East, Australia, and New Zealand, helping them build strong, skilled teams. Stafflethes focuses on connecting organizations with exceptional professionals through tailored hiring solutions that address evolving global workforce needs. With a strong commitment to quality and reliability, Stafflethes partners with businesses worldwide to support long-term growth and operational efficiency. Candidates joining roles through Stafflethes can expect exposure to high standards of safety, performance, and professionalism.<br>Role Description <br>This is a full-time, on-site role for IRATA Certified Multi-Skilled Rope Access Technicians based in Ahmedabad. The role involves performing rope access operations for tasks such as external building maintenance, window cleaning, and structural inspections at height in compliance with IRATA standards and site safety procedures. Daily responsibilities include setting up and checking rope systems, conducting pre-work risk assessments, and maintaining detailed records of work performed and any defects identified. The technician will collaborate with site supervisors and other team members to plan work scopes, follow safe work methods, and ensure efficient completion of tasks within agreed timelines. The role also requires proper care of equipment, adherence to safety regulations, and participation in toolbox talks and periodic training or refresher courses as needed.<br>Job Requirements<br>- Valid IRATA Certification- Multi-skilled Rope Access Technician- Relevant industrial/project experience preferred- Valid passport and willingness to relocate to Saudi Arabia<br>Qualifications<br>Demonstrated competence in Rope Access operations, with current IRATA certification and practical experience in multi-skilled rope access tasks. Strong capability in Working at Height / Work at Height activities, including safe system setup, hazard identification, and strict adherence to safety protocols. Hands-on experience with Window Cleaning and facade maintenance using rope access techniques on commercial or industrial structures. Ability to perform Inspection tasks at height, including visual checks, basic reporting on structural or facade conditions, and documentation of findings. Good physical fitness and stamina suitable for demanding work at height, with a strong safety mindset and attention to detail. Ability to read and follow work instructions, method statements, and safety procedures, and communicate clearly with supervisors and team members. Experience in building maintenance, industrial services, or related fields is an advantage; prior work in multinational or high-compliance environments is beneficial. Relevant vocational training or technical education in a related discipline (e.g., construction, engineering, maintenance) is preferred.<br>What We Offer<br>- Excellent international career opportunity- Competitive salary and benefits- Professional work environment- Long-term project opportunities<br>How to Apply<br>Interested candidates are invited to send their updated CV along with their IRATA certificate to:<br>???? prashant.chhangani@stafflethes.in<br>Only shortlisted candidates will be contacted.

MHE Technician<br>Location: Jeddah, Saudi Arabia Department: Maintenance / MHE<br>About the Role We are looking for a skilled and experienced MHE Technician to join our team in Jeddah. The ideal candidate will be responsible for maintaining, troubleshooting, and repairing Material Handling Equipment to ensure safe, reliable, and efficient operations.<br>Key Responsibilities Perform preventive and corrective maintenance of MHE equipment. Diagnose and troubleshoot mechanical, electrical, and hydraulic faults. Conduct inspections and identify potential equipment issues. Repair and replace faulty components as required. Ensure equipment is operating safely and efficiently. Maintain accurate maintenance records and service reports. Follow safety procedures and maintenance standards. Coordinate with the operations team to minimize equipment downtime.<br>Requirements Technical qualification in Mechanical, Electrical, or a related field. Minimum 3–5 years of experience in MHE maintenance or a related industry. Hands-on experience with forklifts, conveyors, pallet trucks, or other material handling equipment. Strong troubleshooting and fault-finding skills. Knowledge of mechanical, electrical, and hydraulic systems. Transferable Iqama is mandatory. Good communication and teamwork skills. Ability to work independently and under operational requirements. Immediate availability is preferred.<br>What We Offer Competitive salary based on experience and qualifications. Professional growth opportunities. Supportive work environment. Benefits as per company policy and Saudi Labor Law.<br>Apply Now Interested candidates can send their updated CV to:hr@unitedintls.com

Company Description Professionals Arabia Company is a Saudi-based provider of high-quality cleaning, operation, and maintenance services across the Kingdom. Founded in 2015 and headquartered in Riyadh, the company serves residential, commercial, industrial, and governmental clients in all major cities. Its services cover air duct and HVAC cleaning, furniture and carpet care, water tank and pipeline cleaning and disinfection, pest control, deep cleaning, and post-construction cleaning. The company also offers AC and home appliance maintenance and repair, using modern equipment and eco-friendly products to ensure safe, hygienic, and efficient environments. With a strong focus on reliability, transparency, and continuous improvement aligned with Vision 2030, Professionals Arabia Company invests in its people and technology to remain a trusted partner for clients across Saudi Arabia.<br>Role Description The Cleaning Technician is a full-time, on-site role based in Jeddah. This role is responsible for performing a variety of professional cleaning tasks, including deep cleaning of residential and commercial spaces, furniture and carpet cleaning, and post-construction cleanups. Daily activities include following established cleaning procedures and safety standards, using company-provided equipment and eco-friendly products, and ensuring high levels of hygiene in client spaces. The Cleaning Technician will also assist with tasks such as basic HVAC, air duct, and water tank cleaning, and coordinate with supervisors and team members to complete scheduled jobs efficiently. The role requires consistent punctuality, adherence to company quality standards, and respectful interaction with clients and colleagues.<br>Qualifications<br> Strong knowledge of general cleaning techniques, including deep cleaning, surface sanitization, and safe use of cleaning chemicals and equipment. Ability to operate cleaning machinery and tools (e.g., vacuum cleaners, carpet extractors, pressure washers) and perform basic equipment checks and care. Awareness of health, safety, and hygiene standards, including proper use of personal protective equipment and safe handling of materials. Good communication and teamwork skills, with the ability to follow instructions, report issues clearly, and cooperate with supervisors and colleagues. High level of reliability, attention to detail, and commitment to delivering quality, customer-focused service. Previous experience in professional cleaning, facilities services, or a related field is preferred but not always required. Physical ability to perform manual tasks such as lifting, moving equipment, standing for extended periods, and working in varied environments. Willingness to work flexible hours, including weekends or evenings, based on client needs and operational requirements. Basic literacy and numeracy skills to understand work orders, safety guidelines, and reporting forms. Familiarity with cleaning in residential, commercial,

ASTON MARTIN TECHNICIANLocation: Riyadh, Saudi Arabia Employment type: Full-time Company: Legend Motor Works<br>About Legend Motor Works Legend Motor Works is establishing a premium independent automotive service centre in Riyadh, specializing initially in Aston Martin vehicles. We aim to deliver exceptional technical workmanship, accurate diagnostics, transparency, and a customer experience that meets the needs of owners of luxury and high-performance vehicles. We are seeking an experienced Aston Martin Technician to join our technical team and achieve the workshop’s technical and quality standards.<br>MANDATORY REQUIREMENTApplicants must have direct, hands-on technical experience working within an authorized Aston Martin dealership (any dealership around the world)<br>Candidates without authorized Aston Martin dealership experience will not be considered for this first recruitment phase.<br>Key responsibilities Perform scheduled servicing, inspections, maintenance, diagnostics, and mechanical and electrical repairs on Aston Martin vehicles. Diagnose complex mechanical, electrical, electronic, communication-network, and drivability faults. Use AMDS, AMDS II, and Spotlight diagnostic systems to identify faults, perform guided diagnostics, complete software-related procedures, and verify repairs. Interpret diagnostic trouble codes, live data, wiring diagrams, technical bulletins, workshop manuals, and manufacturer repair procedures. Work confidently on Aston Martin V8 and V12 engines, transmissions, suspension, braking, cooling, fuel, HVAC, and electrical systems.<br>Required qualifications and experience Direct experience as a technician within an authorized Aston Martin dealership — mandatory. Aston Martin manufacturer technical training or certification. Practical experience using AMDS and AMDS II. Recognized Level 3 automotive qualification, diploma, apprenticeship, NVQ, City & Guilds, IMI qualification, or an equivalent certification. Strong hands-on experience servicing, diagnosing, and repairing multiple generations of Aston Martin vehicles. Proven knowledge of Aston Martin V8 and V12 powertrains. Experience with software programming, module configuration, calibration, and vehicle-system updates is highly desirable. Good written and spoken English. Willingness to relocate to Riyadh, Saudi Arabia.<br>Employment verification Shortlisted candidates will be required to provide:An updated CV with exact employment dates and job titles. Evidence of employment with an authorized Aston Martin dealership. Aston Martin technical-training records and certificates. Details of AMDS and AMDS II experience. Copies of relevant automotive qualifications and driving licence.<br>The selection process may include a technical interview, document and reference verification, diagnostic case studies, and a practical technical assessment.<br>Only candidates meeting the mandatory Aston Martin dealership-experience requirement will be shortlisted during this recruitment phase.<br><br>Recruitment & Administration Team Legend Motor Works Riyadh, Saudi Arabia Precision. Prestige. Performance.

Description:The Maintenance Technician is responsible for performing skilled or hands-on maintenance and repair work across a variety of systems, including electrical and mechanical.<br>Work Duties and Responsibilities:Performs maintenance, repair, and troubleshooting on electrical, mechanical, HVAC, plumbing systems and building works. Conducts routine inspections to identify potential issues and performs preventive & predictive maintenance tasks. Diagnoses and resolves issues with equipment and machinery. Installs and maintains various types of equipment, machinery, and systems. Responds to emergency maintenance requests and resolves issues promptly. Maintains accurate records of all maintenance activities and repairs. Ensures that all maintenance work complies with safety standards and regulations. Monitors and maintains inventory of tools, equipment, and spare parts. Assists in coordinating and scheduling routine maintenance with the team. Communicates with management regarding any critical issues or maintenance needs. Assists in upgrading or replacing systems and equipment as needed. Uses the Company related softwares and applications professionally. Performs any additional duties or responsibilities assigned by Management.<br>Qualifications and Requirements:High school or diploma in Engineering or related field.3-4+ years of experience. Basic knowledge of tools and maintenance tasks. Good attention to detail and problem-solving skills. Good physical condition Strong knowledge of electrical, mechanical, plumbing, and HVAC systems. Familiarity with safety regulations, and maintenance procedures. Good problem-solving skills and attention to detail. Ability to work independently and as part of a team. Good communication skills.

Saudi Arabia ( SAUDI ARABIA )<br><br>20/06/2026 5:08 PM<br><br>Mechanical Technician<br><br>Job Code: JB00111578<br><br>Easy application process, usually takes less than 1 minutes.<br><br>This opportunity is exclusively open to India candidates.<br><br>New Posted on - 20/06/2026 5:08 PM<br><br>Job Requirement<br><br>Position<br><br>Mechanical Technician<br><br>Industry<br><br>Petroleum / Oil and Gas / Power<br><br>Qualification<br><br>Diploma<br><br>Qualification Specialization<br><br>Mechanical<br><br>Job Location<br><br>Saudi Arabia ( SAUDI ARABIA )<br><br>Experience<br><br>5 - 8 yrs<br><br>Yearly Salary<br><br>Negotiable in SAR<br><br>key skills<br><br>Blueprint reading, Hand tool use, Power tool operation, Welding, Machine shop practices, Mechanical assembly, Hydraulics, Safety protocols<br><br>Job Description<br><br>Job Title<br><br>Mechanical Technician<br><br>Description<br><br>SAUDI ARABIA – REQUIRED FOR REPUTED COMPANY<br><br>MECHANICAL TECHNICIAN – (Fire Fighting) - 10 NOS.<br><br>Must hold a Diploma/Degree in Mechanical Engineering. With previous experience in Saudi Arabia in Fire Fighting companies. <br><br>Terms Of Employment<br><br>Very Attractive Salary<br><br>Contract period will be 2 years <br><br>Duty time will be 8 hours per day / 6 days a week<br><br>Overtime and other benefits will be as per Labour Law Accommodation and Transportation will be provided by the company.<br><br>SHORTLISTING FROM 20TH JUNE TO 24TH JUNE 2026<br><br>ONLINE / VIRTUAL INTERVIEW SHORTLY.<br><br>20.06.2026. <br><br>Interview Details<br><br>Not Available<br><br>Company Profile : ASMACS<br><br>ASMACS’ global network and the infrastructure facilities spread across the Indian Sub-continent and Arabian Gulf Region play a dominant role in the growth of ASMACS Group business.<br><br>Company Address<br><br>411, Sai Chamber, 4th Floor, Opp. Railway Station, Santacruz (E), Mumbai - 400 055, India Tel.:+91 22 26125301 / 26125191 26185509/26150933 / 26180997 Fax: +91 22 26147103 / 26146937 Email: asmacs@asmacs.net<br><br>Skills: Blueprint reading, Hand tool use, Power tool operation, Welding, Machine shop practices, Mechanical assembly, Hydraulics, Safety protocols

Saudi Arabia ( SAUDI ARABIA )<br><br>20/06/2026 5:21 PM<br><br>Chiller Technician<br><br>Job Code: JB00111580<br><br>Easy application process, usually takes less than 1 minutes.<br><br>This opportunity is exclusively open to India candidates.<br><br>New Posted on - 20/06/2026 5:21 PM<br><br>Job Requirement<br><br>Position<br><br>Chiller Technician<br><br>Industry<br><br>Oil and Gas - Pipeline Project<br><br>Qualification<br><br>Diploma<br><br>Qualification Specialization<br><br>Air-conditioning / Refrigeration<br><br>Job Location<br><br>Saudi Arabia ( SAUDI ARABIA )<br><br>Experience<br><br>5 - 8 yrs<br><br>Yearly Salary<br><br>Negotiable in SAR<br><br>key skills<br><br>Refrigeration systems, Electrical troubleshooting, HVAC maintenance, Piping systems, Compressor repair, Pressure testing, Leak detection, Electrical wiring<br><br>Job Description<br><br>Job Title<br><br>Chiller Technician<br><br>Description<br><br>SAUDI ARABIA – REQUIRED FOR REPUTED COMPANY<br><br>CHILLER TECHNICIAN (Compressor Overhauling) - 10 NOS.<br><br>Diploma in HVAC / Mechanical Engineering (mandatory). Minimum 5 years of experience in HVAC/ CHILLER systems within the Facilities Management industry. Preference will be given to Gulf-experienced candidates. The ability to read, understand, and follow drawings and diagrams for various project. Strong technical knowledge of HVAC/ CHILLER systems, components, and troubleshooting methods. Accommodation and Transportation will be provided by the company.<br><br>SHORTLISTING FROM 20TH JUNE TO 24TH JUNE 2026<br><br>ONLINE / VIRTUAL INTERVIEW SHORTLY.<br><br>20.06.2026.<br><br>Interview Details<br><br>Not Available<br><br>Company Profile : ASMACS<br><br>ASMACS’ global network and the infrastructure facilities spread across the Indian Sub-continent and Arabian Gulf Region play a dominant role in the growth of ASMACS Group business.<br><br>Company Address<br><br>411, Sai Chamber, 4th Floor, Opp. Railway Station, Santacruz (E), Mumbai - 400 055, India Tel.:+91 22 26125301 / 26125191 26185509/26150933 / 26180997 Fax: +91 22 26147103 / 26146937 Email: asmacs@asmacs.net<br><br>Skills: Refrigeration systems, Electrical troubleshooting, HVAC maintenance, Piping systems, Compressor repair, Pressure testing, Leak detection, Electrical wiring

Role: IT Operations Technician Number of positions: 1Employment type: Permanent Reporting to: IT Lead Location: Riyadh, KSAStart date: ASAPThis is an events-focused IT operations role, not a software development role. The selected candidate will be responsible for supporting the IT and AV setup for live and hybrid events, including internet bandwidth planning, reviewing hotel RFPs, shipping and installing network/Wi-Fi kits at event locations, and managing the IT setup during the event days. The role will also include starting Zoom sessions, checking primary and backup internet connections, supporting VPN/RDP access, projectors, wireless microphones, recording quality, and escalating any technical issues with hotel IT teams. In addition, the candidate will manage backup connectivity such as 4G routers, SIM cards and adapters, support post-event inventory/reporting, provide HQ IT support between events, and assist with IT purchasing. Must-have profile:The ideal candidate should have:5–7 years of experience in an IT role. Hands-on experience in hybrid/live-event AV and networking. Strong networking, Wi-Fi, VPN/RDP setup experience. BSc in Computer Science is essential. Advanced user experience in Salesforce and MS Office. English is essential; Arabic is strongly preferred. Comfortable with frequent international travel for events. Please note that the most important requirement is live/hybrid event IT and AV experience, over general IT support profiles. Nice to have:Comp TIA Network+ certification. PMI or project management certification.

Job Description:<br>We are a leading electronics and imaging company based in Qatar, dedicated to providing top-tier repair and maintenance services. We are looking for a highly skilled and passionate Digital & Instant Camera Maintenance Technician to join our growing team.<br><br>If you have expert knowledge in diagnosing and repairing all types of digital, DSLR, mirrorless, and instant cameras (such as Fujifilm Instax, Polaroid, etc.), we want you!<br><br>Requirements to Apply:<br>Experience: Proven experience in diagnosing, dismantling, and repairing digital cameras, DSLRs, mirrorless systems, and instant cameras of all major brands. Technical Skills: Strong proficiency in electronic troubleshooting, lens calibration, sensor cleaning, and replacing micro-components (motherboards, shutters, flash units). Software Knowledge: Ability to use camera diagnostic software and firmware update tools. Detail-Oriented: Exceptional precision and hand-eye coordination for handling delicate camera parts. Language: Good communication skills in English (Arabic is a plus).<br><br>What We Offer:<br>Highly Competitive Salary: A rewarding package tailored to your experience and expertise. Excellent Work Environment: Modern laboratory facilities, state-of-the-art tools, and a supportive, professional team. Full Relocation Support: The company will fully cover and handle the recruitment and relocation process (visa, sponsorship, and flight) from your home country to Qa<br>t<br>a<br>r<br>.<br><br>How to Apply:<br>Please submit your updated CV directly through the Linked In Easy Apply button below.

Job Title Maintenance MEP Technician.<br>Job Purpose The Maintenance MEP Technician is responsible for ensuring the efficient and safe operation of the organization's mechanical, electrical, and plumbing (MEP) systems within the facilities. The role involves inspecting, troubleshooting, repairing, maintaining, and installing MEP systems and equipment to ensure business continuity, operational efficiency, and compliance with safety standards.<br>Key Roles & Responsibilities Inspect, maintain, and repair mechanical, electrical, and plumbing (MEP) systems and equipment. Perform preventive and corrective maintenance on HVAC systems, electrical systems, plumbing systems, pumps, motors, lighting, control panels, water supply, and drainage systems. Diagnose faults and perform repairs to minimize equipment downtime. Install, replace, and upgrade MEP equipment and components as required. Assist in the installation and commissioning of new MEP systems during facility upgrades and expansion projects. Monitor the performance of HVAC, electrical, and plumbing systems and recommend improvements. Ensure compliance with company policies, local regulations, and safety standards related to MEP maintenance. Maintain maintenance records and report equipment failures and completed work. Coordinate with contractors and suppliers when specialized maintenance is required. Respond promptly to emergency maintenance requests. Ensure proper use of tools, equipment, and personal protective equipment (PPE). Perform any other duties assigned by the direct manager.<br>Overall Qualifications Qualifications High School Diploma, Technical Diploma, or equivalent. Technical certification in MEP, Mechanical, Electrical, HVAC, or Plumbing is preferred.<br>Work Experience5+ years of experience in facility maintenance, building maintenance, or MEP maintenance in commercial or industrial environments.