Drupal Developer Jobs in Saudi

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Operate and monitor washing, dry cleaning, and drying machinery, including adding chemicals and cleaning lint traps. Identify stained or damaged items and determine status for repair, spot treatment, rewash, or discard. Inspect cleanliness of articles removed from the washer, dryer, or dry-cleaning machines and place in clean linen carts. Set dryers to designated times and temperatures based on fabrics contained in load. Remove lint and debris from dryer screens, dry cleaning filters, and drain trap after each load. Fold cleaned articles into designated size, either by hand or using folding machine. Maintain accurate records of items laundered.</p> <p>Follow all company safety and security policies and procedures; report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Visually inspect tools, equipment, or machines (e.g., to identify defects). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. Move through narrow, confined, or elevated spaces. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education: No high school diploma or G.E.D. equivalent.</p> <p>Related Work Experience: No related work experience.</p> <p>Supervisory Experience: No supervisory experience.</p> <p>License or Certification: None</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Operate and monitor washing, dry cleaning, and drying machinery, including adding chemicals and cleaning lint traps.</p> <p>Identify stained or damaged items and determine status for repair, spot treatment, rewash, or discard.</p> <p>Inspect cleanliness of articles removed from the washer, dryer, or dry-cleaning machines and place in clean linen carts.</p> <p>Set dryers to designated times and temperatures based on fabrics contained in load.</p> <p>Remove lint and debris from dryer screens, dry cleaning filters, and drain trap after each load.</p> <p>Fold cleaned articles into designated size, either by hand or using folding machine.</p> <p>Maintain accurate records of items laundered.</p> <p>Follow all company safety and security policies and procedures; report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications.</p> <p>Ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets.</p> <p>Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees.</p> <p>Ensure adherence to quality expectations and standards; identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings.</p> <p>Visually inspect tools, equipment, or machines (e.g., to identify defects).</p> <p>Stand, sit, or walk for an extended period of time or for an entire work shift.</p> <p>Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance.</p> <p>Move through narrow, confined, or elevated spaces.</p> <p>Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps.</p> <p>Reach overhead and below the knees, including bending, twisting, pulling, and stooping.</p> <p>Perform other reasonable job duties as requested by Supervisors.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>PREFERRED QUALIFICATIONS</strong></p> <p>Education: No high school diploma or G.E.D. equivalent.</p> <p>Related Work Experience: No related work experience.</p> <p>Supervisory Experience: No supervisory experience.</p> <p>License or Certification: None</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>About Supply Chain &amp; Operationsem&gt; /em&gt; in EY:</p><p>EY Supply Chain &amp; Operations consulting helps organizations transform their end-to-end supply chains to drive growth, boost resilience, improve efficiency, and manage costs. They address complex issues and opportunities across the entire product lifecycle, from sourcing raw materials to final delivery to the customer, leveraging technology like AI, data analytics, and automation.em&gt; /em&gt; </p><p><strong>Role and Requirementsu&gt;:/u&gt;</strong></p><ul><li>Develop and implement asset management strategies aligned with organizational goals.</li><li>Oversee the implementation of ISO 55001 standards across asset management processes.</li><li>Lead Maximo implementation projects to enhance asset tracking and management capabilities.</li><li>Collaborate with cross-functional teams to ensure effective asset lifecycle management.</li><li>Monitor and report on asset performance metrics, identifying areas for improvement.</li><li>Manage a team of asset management professionals, providing guidance and support.</li><li>Stay updated on industry trends and best practices to drive continuous improvement.</li><li>Lead and drive business development work across the region</li></ul><p>To do this role effectively, we are looking for people with <strong>knowledge and experience</strong> in the following areas:</p><ul><li>A minimum of 10 years of experience in asset management.</li><li>Implementing ISO 55001 projects in the power and utilities sector</li></ul><ul><li>Certification in Asset Management (e.g., ISO 55001 Lead Auditor)</li></ul><ul><li>Hands-on experience with Maximo or similar asset management software.</li><li>Previous experience in a consulting role within a Big 4 firm</li></ul><p><strong>you ll also have to:</strong></p><p>em&gt; /em&gt; </p><ul><li>Demonstrate strong leadership and team management skills.</li><li>Exhibit excellent communication and interpersonal abilities to engage with stakeholders at all levels.</li><li>Show a commitment to continuous learning and professional development in asset management practices.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>The Opportunity:/strong&gt;</strong></p><p><strong>We are seeking an experienced Asset Management Manager to join our asset management practice. The ideal candidate will have a strong background in asset management, with a focus on implementing best practices and optimizing asset performance. This role requires a strategic thinker with a proven track record in managing complex asset portfolios and driving operational excellence.</strong></p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>. JOB PURPOSE / OBJECTIVE</p><br><p>To Lead the QC team, coordinates inspections, and drives continuous improvement in quality processes to support successful project delivery. Overseeing all quality control operations across assigned projects,</p><br><p> ensuring compliance with applicable standards, specifications, and client requirements</p><br><p>KEY ACCOUNTABILITIES</p><br><p>• Lead and supervise the Project QC team, including inspectors and engineers, across multiple disciplines. </p><br><p>• Develop, implement, and maintain project-specific quality plans and inspection test plans (ITPs). </p><br><p>• Coordinate with project management, engineering, and client representatives to ensure quality &nbsp;expectations are met. </p><br><p>• Oversee inspection activities for welding, NDT, painting, mechanical, and structural disciplines. </p><br><p>• Review and approve quality documentation, including inspection reports, material certificates, and test &nbsp;records. </p><br><p>• Ensure timely closure of non-conformance reports (NCRs) and punch list items. • Mentor junior QC staff and support training initiatives. </p><br><p>• Maintain up-to-date knowledge of industry codes and standards (e.g., ASME, AWS, ISO). </p><br><p>• Develop and maintain inspection schedules to ensure timely execution of quality activities across all project phases. </p><br><p>• Liaise with procurement and subcontracting teams to ensure quality requirements are embedded in vendor and subcontractor deliverables. </p><br><p>• Evaluate and approve subcontractor and supplier quality plans, ensuring alignment with project standards. </p><br><p>• Lead quality-related risk assessments and implement mitigation strategies. </p><br><p>• Ensure proper calibration and maintenance of inspection and testing equipment. </p><br><p>• Participate in constructability reviews and provide input on quality-related aspects during planning and design phases.</p><br><p> • Represent the QC function in project progress meetings, client reviews, and regulatory inspections. </p><br><p>• Promote a proactive quality culture by leading toolbox talks, workshops, and awareness sessions.</p><br><p>• Track and report quality performance trends, initiating improvement initiatives where necessary.</p><br> <p>QUALIFICATIONS &amp; EXPERIENCE</p><br><p>Education • bachelor’s degree in mechanical engineering or equivalent.</p><br><p>Experience At least 10+ years’ experience in Oil &amp; Gas Construction Industry quality functions, of which 5 must have been in a supervisory position.&nbsp;</p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job CIVIL 3D MODELER (DRY UTILITIES) <p>We are looking for an experienced Civil 3D Modeler – Dry Utilities to join major infrastructure projects in Saudi Arabia. The successful candidate will be responsible for creating and coordinating BIM models related to dry utility systems including electrical, telecom, ICT, street lighting, and utility corridors while ensuring compliance with BIM standards and project requirements.</p><br><p>Key Responsibilities:</p><br> <ul> <li> Develop accurate 3D BIM models for dry utility networks using Autodesk Civil 3D. </li> <li> Prepare utility alignments, duct bank layouts, profiles, and construction drawings. </li> <li> Coordinate dry utility models with roads, structures, wet utilities, and landscape disciplines. </li> <li> Produce 2D drawings, shop drawings, and detailed BIM deliverables. </li> <li> Perform clash detection and model coordination activities using Navisworks or similar software. </li> <li> Support quantity extraction and preparation of utility coordination drawings. </li> <li> Ensure compliance with BIM Execution Plans (BEP), company standards, and project requirements. </li> <li> Update and revise BIM models during design and construction phases. </li> <li> Maintain proper documentation and records of BIM deliverables and coordination reports. </li> <li> Support engineering teams with technical drafting and modeling requirements.</li></ul><p>Key Qualifications:</p><br> <ul> <li> Bachelor's Degree or Diploma in Civil Engineering or related discipline. </li> <li> Minimum 5 years of experience in dry utilities BIM modeling. </li> <li> Strong knowledge of electrical, telecom, ICT, and street lighting utility systems. </li> <li> Proficiency in Autodesk Civil 3D is mandatory. </li> <li> Experience with AutoCAD, Navisworks, and BIM workflows. </li> <li> Ability to interpret utility design drawings and specifications. </li> <li> Familiarity with infrastructure coordination and utility authority standards. </li> <li> Experience in infrastructure and mega projects is highly preferred. </li> <li> Strong teamwork and communication skills. </li> <li> Good command of English language.</li><li>Infrastructure and utilities projects </li> <li> Smart city developments </li> <li> Road and transportation projects </li> <li> Mega developments and mixed-use projects</li></ul> <p><strong><strong>Vertical:<br>Digital Engineering</strong></strong></p><br> <br> <br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Senior Risk Engineering Consultant Commercial Risk Solutions / Risk Engineering Jeddah, Saudi Arabia (On-site)<br>Aon is looking for a Senior Risk Engineering Consultant in our Commercial Risk/Risk Engineering department based on a full time basis from our offices in Jeddah.<br>The Senior Risk Engineering Consultant supports Aon clients in identifying, assessing, and mitigating operational, property, and business risks. The role involves conducting risk assessments, site surveys, loss prevention evaluations, and providing risk improvement recommendations to enhance clients' resilience, reduce losses, and support effective insurance placement and risk transfer solutions. The consultant acts as a trusted advisor to clients while working closely with brokers, insurers, and technical specialists. Based on Aon’s risk engineering practices, the role focuses on helping clients understand and improve their risk exposures, develop risk management strategies, and support business continuity and operational resilience.<br>Aon is In the Business of Better Decisions At Aon, we shape decisions for the better to protect and enrich the lives of people around the world. As a global professional services firm, Aon is a global professional services firm providing a broad range of risk, retirement, and health solutions. Within Commercial Risk, Aon supports clients in understanding, managing, and transferring risk through data-driven insights, risk engineering, and insurance placement strategies.<br>Key Responsibilities Risk Assessment & Surveying Conduct property risk engineering assessments across client locations. Perform site visits and risk engineering surveys to identify potential hazards and operational vulnerabilities. Evaluate fire protection systems, maintenance practices, business continuity measures, and loss prevention controls. Assess exposure to property damage, business interruption, machinery breakdown, and operational risks. Conduct construction risk engineering surveys in line with insurance market requirements/ Develop Estimated Maximum loss values to support insurance placement requirements. Review process safety controls, integrity programs and critical equipment risks. Evaluate exposures associated with Business Interruption and Machinery breakdown. <br>Risk Analysis & Reporting Develop comprehensive risk control engineering reports. Prepare risk improvement recommendations and action plans. Support risk quantification activities and evaluation of potential loss scenarios, such as EML and MFL. Monitor implementation of recommendations and assess progress<br>Client Advisory Advise clients on risk mitigation strategies and operational resilience improvements. Support clients in complying with insurance, regulatory, and industry requirements. Provide industry benchmarking and best-practice guidance. Participate in client meetings, presentations, and risk workshops<br>Insurance & Broking Support Collaborate with broking teams to support insurance placement and renewal processes. Prepare and present risk engineering submissions to insurers and underwriters, clearly articulating key exposures and risk improvement measures. Assist insurers and underwriters by supplying risk engineering information and analyses. Contribute to achieving improved insurance terms and risk transfer outcomes.tcomes. Support business development activities including proposals, client pitches, and technical presentations as and when required.<br>Relationship Manegement Act as a trusted risk advisor to key clients, providing technically sound and commercially relevant guidance. Build strong relationships with clients, insurers, surveyors, and internal stakeholders, by leading client discussions. Work closely with regional and global Aon risk engineering teams. Promote Aon’s Risk Engineering and Risk Consulting capabilities to clients. There may be occasional situations where supporting other offices in KSA and international surveys may be required. <br>Skills And Experience That Will Lead to Success<br>Bachelor's or master’s degree in engineering (Mechanical, Electrical, Chemical, Industrial, Civil, construction or related discipline. Professional engineering certification is preferred. Relevant risk engineering, loss prevention, HSE, property risk, or industrial operations experience is preferred.<br>Experience Minimum eight years’ experience at Risk Consultant level. with proven ability to lead site surveys independently and engage directly with clients and insurers. Experience in engineering operations, risk management, insurance risk surveying, manufacturing, energy, construction, or industrial sectors is advantageous. <br>Skills & Competencies Risk assessment and analytical skills Report writing and technical documentation Client relationship management Presentation and communication skills. Problem-solving and decision-making abilities. Knowledge of industrial safety, fire protection, and business continuity principles Strong proficiency in Microsoft Office applications. Fluent in English and Arabic Familiarity with international standards (NFPA, FM Global, API, ISO).<br>How We Support Our Colleagues Aon provides a comprehensive benefits package and a collaborative working environment, designed to support professional development, performance, and wellbeing. <br>KSA HR Statement This role is based in the Kingdom of Saudi Arabia and is subject to local labor laws and regulations. <br>About Aon Aon plc (NYSE: AON) exists to shape decisions for the better — to protect and enrich the lives of people around the world.

Smit Lamnalco is part of the Boskalis group of companies. Working at Smit Lamnalco is about providing marine support services tailored to the unique operational needs of our global customers in local markets. Our promise to our clients is to provide the best marine services possible, no matter how challenging the environment or how remote the location.<br><br>At Smit Lamnalco we are convinced that our people make the difference. With dedication, experience, and teamwork, we make a vital contribution to our clients’ success. Drawing from different backgrounds and nationalities, we are one team working towards the same goal. We offer you the opportunity to develop yourself in a challenging, dynamic, and truly international environment. Together!<br><br>Job Description<br><br>You can make your mark by providing safe, efficient, and professional pilotage services for vessels calling at JCPDI Port, Saudi Aramco facilities, and the Single Point Mooring (SPM), while ensuring all operations are carried out in line with applicable regulations, Harbour Master Instructions, international best practice, and company safety standards.<br><br>Your responsibilities as a Senior Marine Pilot:<br><br>Conduct safe and efficient pilotage operations for vessels arriving, departing, shifting, berthing, and unberthing within JCPDI Port limits, associated facilities, and assigned offshore SPM locations. Provide professional navigational advice to vessel Masters and bridge teams to ensure the safe movement of all vessel types within the port and its approaches. Assess weather, sea state, tides, currents, traffic, and navigational hazards to determine safe operating parameters and support pilotage decisions. Develop and communicate pilotage and berthing plans with vessel Masters, tug Masters, mooring teams, VTS, terminal representatives, and other relevant parties. Direct tug usage and mooring arrangements during berthing, unberthing, and vessel shifting operations. Maintain effective communication and coordination with VTS, port authorities, terminal operators, and vessel bridge teams throughout operations. Ensure compliance with Harbour Master Instructions, port regulations, company procedures, and applicable national and international maritime regulations. Maintain accurate pilotage records, reports, and documentation in line with company requirements. Participate in incident investigations, safety meetings, emergency response exercises, and operational reviews, while actively supporting HSE initiatives and a strong safety culture. Contribute to the mentoring and development of junior pilots, as well as continuous improvement in marine safety, operational efficiency, and customer service. Participate in a 24/7 operational roster and remain available for pilotage duties as required by operational demands. <br><br>Your qualities <br><br>You can make your mark as a Senior Marine Pilot if you have:<br><br>Master Mariner Class 1 (Unlimited) Certificate of Competency, valid medical fitness certification, and completion of IMO Resolution A.960 Pilot Training or an equivalent recognised pilot training programme. Minimum 10 years of experience as a Marine Pilot, including harbour, tanker, offshore, and SPM pilotage operations, preferably within major commercial ports, industrial ports, or oil and gas terminals. Strong knowledge of ship handling, tug operations, bridge resource management, pilotage best practices, and modern navigation systems including ECDIS, radar, and pilotage equipment. Previous experience in the Middle East or Saudi Arabia, as well as exposure to VTS operations, port management systems, container terminal operations, and bulk cargo operations. Proficiency in English is essential, while knowledge of Arabic is a plus. Training or certification in Bridge Resource Management (BRM) and Human Factors. Strong leadership, decision-making, situational awareness, and risk assessment skills. <br><br>Qualifications<br><br>What you can expect <br><br>A dynamic environment: A job that allows you to collaborate with a talented team of experts from different backgrounds and contribute to making a significant impact. Rewarding conditions: This is a great opportunity for a talented and motivated technical professional who is keen and eager to join an International Marine company. Smit Lamnalco offers a competitive compensation & benefit package. Career development: We offer you plenty of opportunities to bring out the best in yourself . <br><br>Extra information <br><br>Full/part-time job: The position of Senior Marine Pilot is a full-time role on an 9-weeks-on, 9-weeks-off rotation. Next steps: Apply easily by completing the online application form. Interviews are held online or in the office. Once it’s clear we’re a good match, we’ll make you an offer – and look forward to welcoming you to the company. <br><br>Additional Information<br><br>We’ll be happy to answer your questions about the position of Senior Marine Pilot. Please contact Catherine Buenaagua, corporate recruiter via our careers page.<br><br>Interested? Please apply by filling in your details and by uploading your cover letter and CV on our careers site.

Senior Risk Engineering Consultant Commercial Risk Solutions / Risk Engineering Jeddah, Saudi Arabia (On-site)<br><br>Aon is looking for a Senior Risk Engineering Consultant in our Commercial Risk/Risk Engineering department based on a full time basis from our offices in Jeddah<br>.<br>The Senior Risk Engineering Consultant supports Aon clients in identifying, assessing, and mitigating operational, property, and business risks. The role involves conducting risk assessments, site surveys, loss prevention evaluations, and providing risk improvement recommendations to enhance clients' resilience, reduce losses, and support effective insurance placement and risk transfer solutions. The consultant acts as a trusted advisor to clients while working closely with brokers, insurers, and technical specialists. Based on Aon’s risk engineering practices, the role focuses on helping clients understand and improve their risk exposures, develop risk management strategies, and support business continuity and operational resilienc<br>e.<br>Aon is In the Business of Better Decisions At Aon, we shape decisions for the better to protect and enrich the lives of people around the world. As a global professional services firm, Aon is a global professional services firm providing a broad range of risk, retirement, and health solutions. Within Commercial Risk, Aon supports clients in understanding, managing, and transferring risk through data-driven insights, risk engineering, and insurance placement strategi<br>es.<br>Key Responsibilities Risk Assessment & Surveying Conduct property risk engineering assessments across client locations. Perform site visits and risk engineering surveys to identify potential hazards and operational vulnerabilities. Evaluate fire protection systems, maintenance practices, business continuity measures, and loss prevention controls. Assess exposure to property damage, business interruption, machinery breakdown, and operational risks. Conduct construction risk engineering surveys in line with insurance market requirements. Develop Estimated Maximum loss values to support insurance placement requirements. Review process safety controls, integrity programs and critical equipment risks. Evaluate exposures associated with Business Interruption and Machinery breakd<br>own.<br>Risk Analysis & Reporting Develop comprehensive risk control engineering reports. Prepare risk improvement recommendations and action plans. Support risk quantification activities and evaluation of potential loss scenarios, such as EML and MFL. Monitor implementation of recommendations and assess prog<br>ress.<br>Client Advisory Advise clients on risk mitigation strategies and operational resilience improvements. Support clients in complying with insurance, regulatory, and industry requirements. Provide industry benchmarking and best-practice guidance. Participate in client meetings, presentations, and risk work<br>shops.<br>Insurance & Broking Support Collaborate with broking teams to support insurance placement and renewal processes. Prepare and present risk engineering submissions to insurers and underwriters, clearly articulating key exposures and risk improvement measures. Assist insurers and underwriters by supplying risk engineering information and analyses. Contribute to achieving improved insurance terms and risk transfer outcomes. Support business development activities including proposals, client pitches, and technical presentations as and when re<br>quired.<br>Relationship Management Act as a trusted risk advisor to key clients, providing technically sound and commercially relevant guidance. Build strong relationships with clients, insurers, surveyors, and internal stakeholders, by leading client discussions. Work closely with regional and global Aon risk engineering teams. Promote Aon’s Risk Engineering and Risk Consulting capabilities to clients. There may be occasional situations where supporting other offices in KSA and international surveys may be r<br>equired.<br>Skills And Experience That Will Lead to Success Qualifications Bachelor's or master’s degree in engineering (Mechanical, Electrical, Chemical, Industrial, Civil, construction or related discipline). Professional engineering certification is preferred. Relevant risk engineering, loss prevention, HSE, property risk, or industrial operations experience is p<br>referred.<br>Experience Minimum eight years’ experience at Risk Consultant level. with proven ability to lead site surveys independently and engage directly with clients and insurers. Experience in engineering operations, risk management, insurance risk surveying, manufacturing, energy, construction, or industrial sectors is adv<br>antageous.<br>Skills & Competencies Risk assessment and analytical skills. Report writing and technical documentation. Client relationship management. Presentation and communication skills. Problem-solving and decision-making abilities. Knowledge of industrial safety, fire protection, and business continuity principles. Strong proficiency in Microsoft Office applications. Fluent in English and Arabic. Familiarity with international standards (NFPA, FM Global,<br> API, ISO).<br>How We Support Our Colleagues? Aon provides a comprehensive benefits package and a collaborative working environment, designed to support professional development, performance, and<br> well-being.<br>KSA HR Statement This role is based in the Kingdom of Saudi Arabia and is subject to local labor laws and<br> regulations.<br>About Aon Aon plc (NYSE: AON) exists to shape decisions for the better — to protect and enrich the lives of people aro<br>und the world.

Global presentation Vallourec provides benchmark tubular solutions for the energy sector and for some of the most demanding industrial applications. Its offer ranges from oil and gas wells in extreme conditions to high-performance mechanical equipment, as well as solutions for the hydrogen, CCUS (Carbon Capture, Utilization and Storage), geothermal and solar energy markets. Vallourec’s pioneering spirit and cutting edge R&D open new technological frontiers. With 15,000 dedicated and passionate employees in more than 20 countries, Vallourec works hand-in-hand with its customers to offer more than just tubes: Vallourec delivers innovative, safe, competitive and smart tubular solutions, to make every project possible.<br>Industrial Information Systems Expert Provide expertise on industrial IT solutions (implementation, support, continuous improvement) : level 2 (RTT/SCADA), level 3 (MES), industry 4.0 solutions, specific industrial solutions, and their integration with ERP and automation systems. Scope<br>Entities : Vallourec Saudi Arabia Sites : Vallourec Saudi Arabia plant, Dammam, Second Industrial City Scope : Industrial IT, with the support of other VDIS teams Industrial IT information systems :Main information systems : MES, RTT (=SCADA) Digital solutions : Smartengo Inventory (SI), Digital Log Sheet (DLS), Realtime Threading Performance (RTP), Fabriq…<br>Specific industrial solutions :Industrial computers running specific solutions (machine-specific software, automation software) Production CCTVOther industrial solutions with a functional aspect Integration with other solutions : ERPs, automation ERPs, PLCs and automation are out of scope apart from integration points<br>Responsibilities Evolutions/Run projects/Projects :Manage projects Understand and analyze business requirements, convert them into IT requirements Follow-up the realization with the teams in charge of the solutions (Application Managers, Product Owners) Follow-up the topics with the various stakeholders Organize and coordinate user acceptance tests Coordinate the new solutions/changes implementation/commissioning/ramp-up Take the ownership and develop a deep understanding of the various solutions, develop the relations with Operations teams/solutions owners :Understand the processes/flows (functional part) Understand the special software (functional and technical part) Understand the underlying infrastructure (technical part) : hardware/software, stations location Document the solutions Join VSA routine meetings (VMS, SMT…) Animate the industrial IT solutions governance (follow-up meetings…) Run activities:Support users on the industrial IT scope Track support requests Identify the improvement opportunities Support the resolution of issues/problems with an industrial IT component through workshops, CITsProvide training Assets management activities :Maintain IT hardware and software inventories on the scope : special industrial computers, special software, solution-specific mobile devices Identify obsolescence points, put these under control in collaboration with the operations teams and the Global Infrastructure teams Take the ownership and develop a deep understanding of the various solutions, develop the relations with Operations teams :Be the referent for industrial information systems Establish and formalize a close collaboration with operational teams and solutions owners Give the operations team visibility on the industrial IT solutions Capitalize the knowledge in the documentation portal<br>Run activities:Make sure the support requests are logged, monitored, closed Provide advanced support when needed (workshops, CITs)<br>Assets management activities :Keep IT hardware and software inventories in the scope up-to-date Keep these assets lifecycle under control Ensure the respect of the Group standards (HSE, governance, infrastructure, security, sourcing, HR…)<br>Health, Safety and Environment Vallourec Saudi Arabia is an industrial site, the Industrial IT Manager works in the IT domain The Industrial IT Manager knows and complies to all HSE rules applicable to the site and the Group<br>EDUCATIONIndustrial information systems-oriented Computer Engineering/Science Masters’s degree Project management certifications are plus<br>Skills Deep understanding of industrial IT solutions (automation pyramid) Technical IT background : general knowledge about servers, networks, computers, security Projects management Experience with continuous improvement methodologies is a plus (CITs, PDCA method…) Excellent analytical/problem-solving skills and autonomy, high level of curiosity Excellent communication skills, both verbal and written, with both local and remote teams<br>REQUIRED EXPERIENCE10-year experience in the management of industrial IT solutions (level 2/3 solutions) as systems analyst/functional consultant, with a significant experience deploying/improving industrial IT solutions Experience with ERPs (SAP, Oracle,…) is a plus Experience with automation solutions is a plus<br>Technical environment In-house level 2 solution for real-time production tracking Specific level 3 solution (PSI) for MESSAP as ERPVarious in-house digital solutions for yard management, production performance monitoring, digitalization Various vendor-specific software to control the machines<br>LANGUISTIC KNOWLEDGEGood English (written, spoken) is mandatory Arabic, French are plus

Be the change. Join the world’s most visionary developer.<br>Red Sea Global (RSG) is showing that there is a better way to positively shape the places we live, work and travel.<br>We are purpose-driven and committed to people and planet. Our transformative programs are a driving force to achieving Vision 2030, as well as leading the world towards regenerative tourism.<br>Join RSG and be part of the positive change for Saudi Arabia and the world.<br>Job Purpose<br>Manage the development, governance, and execution of RSG's HR strategy framework, project portfolio, and divisional planning cycle, ensuring alignment with corporate objectives and integrated delivery across all HR functions.<br>Functional Responsibilities:<br>This job description outlines the core responsibilities of the role but is not exhaustive. Additional tasks related to the broader department may be assigned as required.<br>Manage the development and maintenance of RSG's People and HR strategy framework and HR service model, ensuring alignment with corporate strategy and evolving business priorities across all HR functions. Monitor the execution of the HR strategy roadmap, tracking progress against defined milestones, identifying delivery risks, and providing structured performance updates to senior HR leadership. Drive the governance of strategic HR projects and initiatives, establishing reporting cadences, coordinating cross-functional stakeholders, and ensuring timely and structured delivery in line with defined objectives. Act as the focal point for HR project governance, maintaining structured delivery frameworks, documentation standards, and stakeholder coordination protocols across all active HR strategic initiatives. Manage the annual business planning cycle for the HR division, coordinating input from all HR functions, consolidating deliverables and budget submissions, and ensuring timely alignment with RSG's business planning calendar. Develop, cascade, and monitor the HR division's KPIs and objectives in coordination with the Strategy & Performance division, ensuring alignment with corporate performance frameworks and consistent tracking across all HR functions. Integrate change management strategies into RSG projects and initiatives that affect people, overseeing stakeholder engagement, communication planning, and transition support, while monitoring and managing the people impact of organizational changes to ensure smooth adoption throughout the change process, in alignment with the organizational culture and internal communications units. Develop and maintain the HR shared services delivery model between Group HR and RSG subsidiaries, defining the service catalog, pricing framework, and governance method, and conducting periodic HR maturity assessments to inform continuous improvement. Facilitate alignment between corporate strategy and HR deliverables through structured project planning, milestone tracking, and cross-functional execution reviews. Contribute to enterprise-wide transformation initiatives from an HR strategy perspective, in collaboration with the organization design & workforce planning section and other relevant HR functions, ensuring operational and people impacts are assessed, planned, and executed in the best interest of RSG. Support the development and implementation of RSG's Saudization strategy in collaboration with relevant HR functions, contributing to workforce localization planning, people upskilling, succession planning, and vocational and internship programs, ensuring HR's role in Saudization compliance and regulatory reporting is fulfilled in alignment with internal control standards. Support GRC and internal audit processes from a project governance perspective by maintaining structured documentation of HR strategic initiatives, milestone tracking records, and divisional performance reports, coordinating with the HR Policies & Procedures section as the primary compliance and regulatory contact for the HR division.<br>Managerial Responsibilities:Contribute to providing input to the Department’s strategy from the Section or Unit perspective, in alignment with RSG’s vision and mission. Contribute to developing the Section or Unit’s objectives, KPIs, and annual operational plans, ensuring implementation meets performance targets. Contribute to the Section or Unit’s budget preparation and monitor financial performance. Implement and ensure adherence to Section or Unit policies and procedures; oversee performance and KPI communication. Ensure effective staffing, development, and deployment of Section or Unit employees in coordination with higher management.<br>Job Requirements Academic Qualifications:Bachelor's degree in Human Resources, Business Administration, Organizational Psychology, or a related field. (Master’s Degree Preferred) Years of Experience: 10 years (with 2+ in managerial roles) of relevant experience Other Requirements:Project Management Professional (PMP) or equivalent project governance certification is preferred HR certifications such as SHRM-CP, CIPD, APHRI, or equivalent are preferred Experience in organizational change management or holding a recognized change management certification (e.g., Prosci, ACMP) is preferred<br>Key Interactions Internal Interactions External Interactions:HR Centers of Excellence Organization Design & Workforce Planning Unit RSG Subsidiaries (where applicable) Strategy & Performance GRCLegal Sustainability

Global presentation Vallourec provides benchmark tubular solutions for the energy sector and for some of the most demanding industrial applications. Its offer ranges from oil and gas wells in extreme conditions to high-performance mechanical equipment, as well as solutions for the hydrogen, CCUS (Carbon Capture, Utilization and Storage), geothermal and solar energy markets. Vallourec’s pioneering spirit and cutting edge R&D open new technological frontiers. With 15,000 dedicated and passionate employees in more than 20 countries, Vallourec works hand-in-hand with its customers to offer more than just tubes: Vallourec delivers innovative, safe, competitive and smart tubular solutions, to make every project possible.<br>Industrial Information Systems Expert Provide expertise on industrial IT solutions (implementation, support, continuous improvement) : level 2 (RTT/SCADA), level 3 (MES), industry 4.0 solutions, specific industrial solutions, and their integration with ERP and automation systems. Scope<br>Entities : Vallourec Saudi Arabia Sites : Vallourec Saudi Arabia plant, Dammam, Second Industrial City Scope : Industrial IT, with the support of other VDIS teams Industrial IT information systems :Main information systems : MES, RTT (=SCADA) Digital solutions : Smartengo Inventory (SI), Digital Log Sheet (DLS), Realtime Threading Performance (RTP), Fabriq…<br>Specific industrial solutions :Industrial computers running specific solutions (machine-specific software, automation software) Production CCTVOther industrial solutions with a functional aspect Integration with other solutions : ERPs, automation ERPs, PLCs and automation are out of scope apart from integration points<br>Responsibilities Evolutions/Run projects/Projects :Manage projects Understand and analyze business requirements, convert them into IT requirements Follow-up the realization with the teams in charge of the solutions (Application Managers, Product Owners) Follow-up the topics with the various stakeholders Organize and coordinate user acceptance tests Coordinate the new solutions/changes implementation/commissioning/ramp-up Take the ownership and develop a deep understanding of the various solutions, develop the relations with Operations teams/solutions owners :Understand the processes/flows (functional part) Understand the special software (functional and technical part) Understand the underlying infrastructure (technical part) : hardware/software, stations location Document the solutions Join VSA routine meetings (VMS, SMT…) Animate the industrial IT solutions governance (follow-up meetings…) Run activities:Support users on the industrial IT scope Track support requests Identify the improvement opportunities Support the resolution of issues/problems with an industrial IT component through workshops, CITsProvide training Assets management activities :Maintain IT hardware and software inventories on the scope : special industrial computers, special software, solution-specific mobile devices Identify obsolescence points, put these under control in collaboration with the operations teams and the Global Infrastructure teams Take the ownership and develop a deep understanding of the various solutions, develop the relations with Operations teams :Be the referent for industrial information systems Establish and formalize a close collaboration with operational teams and solutions owners Give the operations team visibility on the industrial IT solutions Capitalize the knowledge in the documentation portal<br>Run activities:Make sure the support requests are logged, monitored, closed Provide advanced support when needed (workshops, CITs)<br>Assets management activities :Keep IT hardware and software inventories in the scope up-to-date Keep these assets lifecycle under control Ensure the respect of the Group standards (HSE, governance, infrastructure, security, sourcing, HR…)<br>Health, Safety and Environment Vallourec Saudi Arabia is an industrial site, the Industrial IT Manager works in the IT domain The Industrial IT Manager knows and complies to all HSE rules applicable to the site and the Group<br>EDUCATIONIndustrial information systems-oriented Computer Engineering/Science Masters’s degree Project management certifications are plus<br>Skills Deep understanding of industrial IT solutions (automation pyramid) Technical IT background : general knowledge about servers, networks, computers, security Projects management Experience with continuous improvement methodologies is a plus (CITs, PDCA method…) Excellent analytical/problem-solving skills and autonomy, high level of curiosity Excellent communication skills, both verbal and written, with both local and remote teams<br>REQUIRED EXPERIENCE10-year experience in the management of industrial IT solutions (level 2/3 solutions) as systems analyst/functional consultant, with a significant experience deploying/improving industrial IT solutions Experience with ERPs (SAP, Oracle,…) is a plus Experience with automation solutions is a plus<br>Technical environment In-house level 2 solution for real-time production tracking Specific level 3 solution (PSI) for MESSAP as ERPVarious in-house digital solutions for yard management, production performance monitoring, digitalization Various vendor-specific software to control the machines<br>LANGUISTIC KNOWLEDGEGood English (written, spoken) is mandatory Arabic, French are plus

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Develop and maintain strategic partnerships with key accounts, including hospitals, healthcare institutions, and other healthcare providers. Will be responsible for driving sales growth, maximizing market share, and ensuring the successful commercialization of Aspen Healthcare products within the assigned key accounts.</p><p>Key Account Management: Develop and implement strategic account plans for assigned key accounts, in alignment with the overall business objectives. Build and maintain strong relationships with key stakeholders, including KOLs (Key Opinion Leaders), procurement managers, and other decision-makers within the accounts. Sales Growth: Drive sales growth by identifying opportunities, generating leads, and expanding product adoption within the assigned key accounts. Collaborate with the sales team to develop and execute sales strategies, promotional plans, and product launch initiatives. Business Development: Identify and pursue new business opportunities within the assigned key accounts. This includes conducting market research, analysing the competitive landscape, and identifying potential areas for product expansion or partnership collaborations. Strategic Planning: Develop and execute strategic account plans that outline objectives, tactics, and timelines to maximize sales and market share within the key accounts. Continuously monitor account performance, market trends, and competitor activities to identify opportunities and challenges. Relationship Management: Build and maintain strong relationships with key stakeholders within the key accounts. Understand their needs, priorities, and challenges, and provide solutions and support to meet their requirements. Act as a trusted advisor and provide product information, training, and support as needed. Cross-functional Collaboration: Collaborate with internal teams, including sales, marketing, medical affairs, market access, and supply chain, to ensure alignment and integration of strategies within the assigned key accounts. Coordinate with these teams to deliver value-added services, educational programs, and promotional activities to the accounts. Market Insights: Gather market intelligence and insights from key accounts to inform product development, market strategies, and competitive positioning. Provide feedback and recommendations to internal teams to enhance product offerings and address customer needs.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Requirements</h2><p>EDUCATION QUALIFICATIONS AND EXPERIENCE:</p><p>Bachelor's Degree in B.Sc. Pharmacy</p><p>3 Years in Pharmaceutical Sales OTC, Dermatology or Women's Health</p><h2>TECHNICAL SKILLS:</h2><p>Key Account Management - Professional</p><h2>KEY ATTRIBUTES:</h2><p>Market Knowledge</p><p>Flexibility and tolerance for ambiguity</p><p>Technical /Professional skills</p><p>Consumer relevancy</p><p>Capacity for and resistance to stress</p><p>Industry knowledge</p><p>Problem solving</p><p>Active listening</p><p>Curiosity/learning agility</p><p>Information seeking</p><p>Informal communication skills</p><h2>ASPEN COMPETENCIES:</h2><h3>BUSINESS</h3><p>Foster Consumer &amp; Customer Commitment</p><p>Makes Good Decision</p><h3>PEOPLE</h3><p>Communicate Effectively</p><p>Dealing with ambiguity/Embrace change</p><h3>SELF</h3><p>Continuously Grow &amp; Develop</p><p>Contribute Special Expertise</p><p></p></section>

Senior Risk Engineering Consultant Commercial Risk Solutions / Risk Engineering Jeddah, Saudi Arabia (On-site)<br><br>Aon is looking for a Senior Risk Engineering Consultant in our Commercial Risk/Risk Engineering department based on a full time basis from our offices in Jeddah<br>.<br>The Senior Risk Engineering Consultant supports Aon clients in identifying, assessing, and mitigating operational, property, and business risks. The role involves conducting risk assessments, site surveys, loss prevention evaluations, and providing risk improvement recommendations to enhance clients' resilience, reduce losses, and support effective insurance placement and risk transfer solutions. The consultant acts as a trusted advisor to clients while working closely with brokers, insurers, and technical specialists. Based on Aon’s risk engineering practices, the role focuses on helping clients understand and improve their risk exposures, develop risk management strategies, and support business continuity and operational resilienc<br>e.<br>Aon is In the Business of Better Decisions At Aon, we shape decisions for the better to protect and enrich the lives of people around the world. As a global professional services firm, Aon is a global professional services firm providing a broad range of risk, retirement, and health solutions. Within Commercial Risk, Aon supports clients in understanding, managing, and transferring risk through data-driven insights, risk engineering, and insurance placement strategi<br>es.<br>Key Responsibilities Risk Assessment & Surveying Conduct property risk engineering assessments across client locations. Perform site visits and risk engineering surveys to identify potential hazards and operational vulnerabilities. Evaluate fire protection systems, maintenance practices, business continuity measures, and loss prevention controls. Assess exposure to property damage, business interruption, machinery breakdown, and operational risks. Conduct construction risk engineering surveys in line with insurance market requirements. Develop Estimated Maximum loss values to support insurance placement requirements. Review process safety controls, integrity programs and critical equipment risks. Evaluate exposures associated with Business Interruption and Machinery breakd<br>own.<br>Risk Analysis & Reporting Develop comprehensive risk control engineering reports. Prepare risk improvement recommendations and action plans. Support risk quantification activities and evaluation of potential loss scenarios, such as EML and MFL. Monitor implementation of recommendations and assess prog<br>ress.<br>Client Advisory Advise clients on risk mitigation strategies and operational resilience improvements. Support clients in complying with insurance, regulatory, and industry requirements. Provide industry benchmarking and best-practice guidance. Participate in client meetings, presentations, and risk work<br>shops.<br>Insurance & Broking Support Collaborate with broking teams to support insurance placement and renewal processes. Prepare and present risk engineering submissions to insurers and underwriters, clearly articulating key exposures and risk improvement measures. Assist insurers and underwriters by supplying risk engineering information and analyses. Contribute to achieving improved insurance terms and risk transfer outcomes. Support business development activities including proposals, client pitches, and technical presentations as and when re<br>quired.<br>Relationship Management Act as a trusted risk advisor to key clients, providing technically sound and commercially relevant guidance. Build strong relationships with clients, insurers, surveyors, and internal stakeholders, by leading client discussions. Work closely with regional and global Aon risk engineering teams. Promote Aon’s Risk Engineering and Risk Consulting capabilities to clients. There may be occasional situations where supporting other offices in KSA and international surveys may be r<br>equired.<br>Skills And Experience That Will Lead to Success Qualifications Bachelor's or master’s degree in engineering (Mechanical, Electrical, Chemical, Industrial, Civil, construction or related discipline). Professional engineering certification is preferred. Relevant risk engineering, loss prevention, HSE, property risk, or industrial operations experience is p<br>referred.<br>Experience Minimum eight years’ experience at Risk Consultant level. with proven ability to lead site surveys independently and engage directly with clients and insurers. Experience in engineering operations, risk management, insurance risk surveying, manufacturing, energy, construction, or industrial sectors is adv<br>antageous.<br>Skills & Competencies Risk assessment and analytical skills. Report writing and technical documentation. Client relationship management. Presentation and communication skills. Problem-solving and decision-making abilities. Knowledge of industrial safety, fire protection, and business continuity principles. Strong proficiency in Microsoft Office applications. Fluent in English and Arabic. Familiarity with international standards (NFPA, FM Global,<br> API, ISO).<br>How We Support Our Colleagues? Aon provides a comprehensive benefits package and a collaborative working environment, designed to support professional development, performance, and<br> well-being.<br>KSA HR Statement This role is based in the Kingdom of Saudi Arabia and is subject to local labor laws and<br> regulations.<br>About Aon Aon plc (NYSE: AON) exists to shape decisions for the better — to protect and enrich the lives of people aro<br>und the world.

<p>Jobholders at this level are responsible for leading work activities and working autonomously with minor direction towards predetermined long-term objectives. Jobholders might act as internal consultants and facilitators through providing guidance to deliver and perform operational activities. Their main operational role includes participating in developing corporate risk management strategy and policies, guiding development of resilience plan and mitigation plan ensuring effective and needed actions, advising on updating ZATCA s risk appetite, assisting in the delivery of world-class level Enterprise Risk Management training sessions and helping in the development of team members risk related competencies, as well as providing needed advice for strategic decisions.</p><p><strong>Risk Assessment</strong></p><p>Follow on the latest ERP topics, models, systems and best practices to recommend updated in risk assessment methodologies, tools and techniques Review ZATCA s business model and analyze risk appetite levels and embed control criteria into the organization functional activities to ensure alignment with ZATCA s strategy and management directions Conduct risk assessment to evaluate current operational risks resulting from human errors, weak systems, business processes, procedures, etc. and highlight emerging risks Review and validate identified corporate risks, incorporate mitigation plan into sectors and divisions operational plans and communicate with relevant business units to limit occurrence Assess and analyze emerging risks, conduct relevant risk assessments to update registers and develop response plans to ensure that business areas have a suitable mitigation strategy in place Consolidate and categorize risks, develop risk factors and KPIs for each sector and update SAS system and related database accordingly Prioritize risks and develop corporate risk heatmap according to risk assessment results and ensure communication with business units to facilitate the development of response plans</p><p><strong>Risk Control</strong></p><p>Develop dashboard to follow on Key Risk Indicators and high risks to ensure the accurate and timely spotting of identified exposures Implement risk mitigation protocols and track risk related metrics including operational, financial, fraud and information security risks based on precedents and best practices Review and update mitigation plan to include newly identified risks response and cascade to concerned functions for implementation Perform quarterly risk and control re-assessment studies to identify new risks, re-evaluate outstanding ones and recommend improvements to the risk structure Conduct awareness and training sessions to cultivate a risk control culture and foster risk awareness in the organization and provide guidance over corporate risks and ERP risk framework Review and analyze ZATCA s risk management activities and update the Risk Maturity Model to measure the effectiveness of risk management program and develop reports highlighting improvement actions</p><p><strong>Reporting</strong></p><p>Develop periodic reports highlighting corporate risks by intensity and severity to the board of directors and relevant committees to support decision making in strategic areas</p><p><strong>Organization and Operations</strong></p><p>Follow all relevant policies, processes and standard operating procedures so that work is carried out in a controlled and consistent manner Help in solving escalated problems and provide needed support for junior team to ensure work is carried out in an efficient manner Escalate complex problems to the relevant person to ensure cases/issues are closed properly Perform other duties as requested</p><p><strong>People Management</strong></p><p>Train junior staff on the different job activities to ensure transfer of know-how, when applicable Provide clear direction, prioritize tasks, assign and delegate responsibility, and monitor the workflow of subordinates/ junior staff Support junior staff or direct reports in order to execute their duties according to set policies and processes</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Risk Management, or equivalent is required</li><li>Master's degree in Business Administration, or equivalent is preferred</li><li>A minimum of 5 years of relevant experience</li></ul><p><strong>Competencies</strong></p><ul><li>Policy Making - Proficient</li><li>Collaboration and Communication - Developing</li><li>Fact Based Recommendations - Advanced</li><li>Professionalism - Proficient</li><li>Data Analytics - Proficient</li><li>Enterprise Risk Management - Advanced</li><li>Results Oriented - Proficient</li><li>Corporate Governance and Compliance - Advanced</li><li>Customer Focus - Proficient</li><li>Enablement of Change and Innovation - Developing</li></ul>

Engagement details:Job Title: Head of Operations Client: Prominent Regional Corporate Firm - Oil & Gas Employment type: Permanent role Location: Onsite in Dammam, KSAExperience level: 18+ years<br>About the Joint Venture:The JV is being established to build an advanced manufacturing and remanufacturing platform serving the Oil & Gas upstream sector in Saudi Arabia. The facility will focus on high-precision CNC machining, remanufacturing, welding/fabrication, assembly, and special process-related capabilities for critical upstream applications.<br>The JV is aligned with Saudi Vision 2030, IKTVA localization objectives, and the growing demand for in-Kingdom manufacturing capability to support energy customers, OEMs, EPCs, and service companies.<br>Role Summary:The Head of Operations will be responsible for leading the end-to-end operational execution of the JV facility, including production, manufacturing engineering, maintenance, procurement, supply chain, stores, planning, and operational excellence.<br>This is a critical leadership role reporting to the General Manager / Plant Head. The role requires a hands-on, execution-driven leader with strong experience in API-certified manufacturing environments, large CNC machining operations, welding/fabrication, greenfield plant setup, and scale-up of complex manufacturing operations.<br>The Head of Operations will be responsible for converting the JV’s business plan into a high-performing, customer-qualified, cost-efficient, and scalable manufacturing operation.<br>Key Responsibilities:1. Overall Operations Leadership Lead complete plant operations covering production, manufacturing engineering, maintenance, procurement, stores, supply chain, production planning, and operational excellence. Translate the business plan into executable production, manpower, machine, capacity, and supply chain plans. Ensure the facility achieves planned output, cost, delivery, productivity, safety, and customer-readiness targets. Establish strong daily, weekly, and monthly operating review mechanisms. Drive accountability across all operational functions and build a performance-oriented manufacturing culture.<br>2. Greenfield Plant Setup & Ramp-UpLead operational readiness for the greenfield facility, including plant layout, machine placement, material flow, utilities, stores, internal logistics, and production systems. Support installation, commissioning, trial runs, and stabilization of CNC machines, fabrication equipment, and supporting infrastructure. Build operating systems from the ground up, including SOPs, work instructions, maintenance systems, stores controls, production dashboards, and escalation processes. Ensure the plant is ready for API, ISO, customer audits, and industrial licensing requirements. Drive phased ramp-up from initial production to full-scale operations in line with the JV business plan.<br>3. Production & Manufacturing Execution Own delivery of production plans across CNC machining, welding/fabrication, assembly, and remanufacturing operations. Ensure effective utilization of machines, manpower, tooling, fixtures, and materials. Drive improvements in cycle time, setup time, machine utilization, throughput, productivity, and cost per part. Establish strong shopfloor discipline, production control, shift planning, and output tracking. Ensure operational readiness for machining and remanufacturing of upstream oilfield components such as drilling tools, wellhead components, pressure control parts, valves, repair parts, and other high-integrity components.<br>4. Manufacturing Engineering & Industrialization Lead manufacturing engineering activities including process planning, methoding, CNC programming governance, fixture development, tool selection, cycle time optimization, process validation. Support new product introduction, first article development, DFM reviews, routing definition, and manufacturing feasibility. Build robust process engineering systems for repeatability, productivity, and quality at source. Drive standardization of manufacturing processes across machining, fabrication, welding, assembly, and remanufacturing. Work closely with Quality to ensure process controls are aligned with API, ISO, and customer-specific requirements.5. Maintenance, Reliability & Asset Utilization Establish preventive, predictive, and breakdown maintenance systems for all plant assets. Drive high uptime and reliability of CNC machines, fabrication equipment, utilities, cranes, compressors, and supporting infrastructure. Implement TPM and structured maintenance KPIs. Own OEE improvement, machine availability, MTTR, MTBF, spare parts planning, and maintenance cost control. Ensure all critical assets are maintained in audit-ready condition.<br>6. Procurement, Supply Chain & Stores Lead end-to-end supply chain covering procurement, vendor development, import logistics, stores, inventory, subcontracting, and consumables planning. Develop local and global supplier base for raw materials, tools, fixtures, consumables, spares, subcontract processes, and services. Ensure material availability to support production schedules while maintaining strong inventory discipline. Build vendor qualification and performance review systems. Drive cost reduction, supplier reliability, lead-time reduction, and working capital efficiency. Support localization through development of capable in-Kingdom suppliers wherever feasible.<br>7. Quality, API & Customer Readiness Support Work closely with the Quality Head, who will report independently to the GM, to ensure operational compliance with API, ISO, HSE, and customer audit requirements. Ensure production processes are built with quality at source, traceability, documentation discipline, and process control. Support API Q1, API monogram, ISO, customer qualification, and supplier audit readiness. Lead closure of operational actions arising from audits, NCRs, customer feedback, and qualification reviews. Ensure shopfloor practices support a zero-defect and right-first-time culture.<br>8. Customer & Cross-Functional Interface Participate in customer audits, technical discussions, manufacturing readiness reviews, and capacity discussions. Support the GM in operational discussions with key customers, OEMs, EPCs, and upstream service companies. Provide credible operational inputs on lead times, capacity, manufacturing feasibility, delivery readiness, and ramp-up plans. Coordinate with Business Development, Quality, Finance, and HR to ensure seamless execution of customer commitments.<br>9. Lean Manufacturing & Operational Excellence Drive Lean Manufacturing, 5S, Kaizen, TPM, SMED, value-stream mapping, visual management, and continuous improvement initiatives. Establish a daily management system covering safety, quality, delivery, cost, productivity, and people metrics. Identify and eliminate waste across production, stores, supply chain, maintenance, and engineering processes. Build a continuous improvement culture across the plant. Lead structured cost-reduction and productivity-improvement programs.<br>10. People Leadership & Localization Build and lead a high-performing operations organization across production, engineering, maintenance, procurement, stores, and planning. Manage and develop a team size expected to exceed 100 employees as the facility scales. Develop local Saudi talent in alignment with localization and IKTVA objectives. Create strong second-line leadership and succession depth across all operational functions. Build a culture of discipline, ownership, safety, learning, and execution excellence.<br>Qualifications & Experience Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Production Engineering, or related discipline. Master’s degree preferred.18+ years of experience in manufacturing operations, with significant exposure to precision machining, fabrication, welding, and industrial manufacturing. Mandatory experience in API-certified manufacturing environments. Strong experience in Oil & Gas upstream manufacturing or remanufacturing is highly preferred. Proven experience managing large CNC machining operations, preferably with more than 20 CNC machines. Experience in welding, fabrication, assembly, repair, or remanufacturing operations. Proven greenfield plant setup or major capacity expansion experience. Demonstrated ability to lead teams of more than 100 people. Strong understanding of production planning, manufacturing engineering, maintenance, procurement, supply chain, and stores. Experience in Lean Manufacturing, TPM, Six Sigma, Kaizen, and structured operational excellence systems. Exposure to GCC / Saudi manufacturing ecosystem will be an added advantage.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>.</p><br>Job Purpose <br><p>Responsible for planning, executing, and delivering projects on time, within scope, and to required quality standards. Coordinates with stakeholders, manages risks and changes, and ensures effective communication and reporting throughout the project lifecycle to achieve successful project outcomes.</p><br><br><br>Key Accountability Areas <br><p>Project Planning and Delivery:</p><br> <ul> <li>Develop project plans, schedules, milestones, and deliverables.</li> <li>Define project scope, objectives, and success criteria.</li> <li>Coordinate project activities and resources.</li> <li>Monitor execution to ensure timely delivery of project outcomes.</li> </ul> <p>Stakeholder and Team Management:</p><br> <ul> <li>Engage and coordinate with project stakeholders.</li> <li>Facilitate communication among project teams and business owners.</li> <li>Manage stakeholder expectations and project requirements.</li> <li>Conduct project meetings and follow up on action items.</li> </ul> <p>Risk, Issue, and Change Management:</p><br> <ul> <li>Identify and assess project risks and issues.</li> <li>Develop mitigation and contingency plans.</li> <li>Manage and review project change requests.</li> <li>Escalate critical risks, issues, and changes when required.</li> </ul> <p>Quality and Performance Monitoring:</p><br> <ul> <li>Monitor project performance against approved plans.</li> <li>Review deliverables against acceptance criteria.</li> <li>Ensure compliance with project standards and quality requirements.</li> <li>Track project KPIs and report progress to stakeholders.</li> </ul> <p>Governance, Reporting, and Vendor Coordination:</p><br> <ul> <li>Prepare project reports, dashboards, and status updates.</li> <li>Apply approved project management methodologies and templates.</li> <li>Support the preparation of scopes of work and project documentation.</li> <li>Coordinate with vendors and monitor contractual deliverables.</li> </ul><br><br>Role Accountability <br><p>HR Proficiency:</p><br> <ul> <li>Ability to recruit, recognize and cultivate high performers and expose them in order to create a robust second line of management.</li> <li>Ability to recognize low performers and guide them to improve or release them.</li> <li>Ability to treat subordinates equally without any discrimination.</li> <li>Assessment criteria of subordinates is performance that leads to planned results.</li> <li>Ensure availability of delegation of authority matrix to have sufficient delegations as per company policy.</li> </ul> <p>Responsibility:</p><br> <ul> <li>Must take full responsibility for his operation as per the job description and the required deliverables from this position, taking into consideration the general company guidelines.</li> <li>Able to anticipate problems and make the necessary proactive steps to prevent them</li> <li>Ability to take necessary and proper timely decisions.</li> </ul> <p>Delivery:</p><br> <ul> <li>Deliver the required results in timely manner with required quality and cost.</li> <li>Making a Tangible Difference:</li> <li>Must make a tangible difference to his area of operation. and exceed business expectations.</li> </ul> <p>Business Planning and Performance:</p><br> <ul> <li>Able to transform the corporate goals into business plans.</li> <li>Able to Plan, follow-up and execute those plans, whether they are annual or development plans.</li> <li>Monitor the plan performance and initiate action to strengthen results and take the corrective action accordingly.</li> <li>Provide periodic work progress reports.</li> <li>Responsible for monitoring and controlling budgets and expenses to achieve the optimum cost efficiency.</li> </ul> <p>Organizational Development:</p><br> <ul> <li>Develop the organizational structure according to the current requirements taking into consideration future and development plans.</li> <li>Ensure availability of job descriptions for all job roles and deployment.</li> </ul> <p>Business Process Improvements:</p><br> <ul> <li>Develop, coordinate well-defined written systems, policies, procedures, and seek automations opportunities as much as possible.</li> <li>Should be conversant and able to navigate through IT solutions especially those relevant to his job and business.</li> <li>Promote the automated systems and using them fully, to spread its culture.</li> </ul> <p>Quality:</p><br> <ul> <li>Quality is considered as alfanar’s prime competitive advantage as such, managers are expected to act accordingly.</li> </ul> <p>Adaptation:</p><br> <ul> <li>Adapt to new and alternative techniques, technologies, management structures, and business models.</li> </ul> <p>Health, Safety and Environment:</p><br> <ul> <li>Ensure a safe, secure, and legal work environment as per the standard regulations.</li> </ul><br><br>Academic Qualification <br>Bachelor Degree in Business Management or Any relevant field<br><br><br>Work Experience <br>6 to 10 Years<br><br><br>Technical / Functional Competencies <br>Project Management<br>Project Coordination<br>Project Control<br>Project Communications<br>Project Change Management<br><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 5+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

HORECA Sales Executive – Fresh Food Jeddah & Riyadh , Saudi Arabia<br>About the Role We are looking for a motivated HORECA Sales Executive to join our Fresh Food team. The successful candidate will be responsible for developing new business opportunities, managing key customer relationships, and driving sales growth across hotels, restaurants, cafés, catering companies, and institutional customers.<br>Key Responsibilities Develop and expand the customer base within the HORECA sector. Identify and acquire new business opportunities. Build and maintain strong customer relationships. Achieve monthly, quarterly, and annual sales targets. Conduct regular customer visits and business reviews. Promote the company's fresh food product portfolio. Coordinate with Supply Chain, Operations, and Customer Service. Ensure timely payment collection and credit compliance. Prepare sales reports, forecasts, and pipeline updates. Represent the company at exhibitions and customer events.<br>Requirements Bachelor's degree is preferred. Valid Saudi driving license.3–5 years of HORECA sales experience. Experience selling fresh food products (meat, poultry, seafood, dairy, fruits & vegetables, chilled products). Strong network within the HORECA market. Excellent negotiation and communication skills. Customer-focused with strong relationship management skills. Ability to work independently and achieve sales targets.<br>Preferred Skills Business Development Key Account Management B2B Sales CRMNegotiation Communication Fresh Food Sales

Job Summary:<br> Maharah Human Resources Company is seeking an experienced Investment Manager to oversee and manage the company's investment portfolio. The successful candidate will be responsible for identifying investment opportunities, performing financial analysis, and developing strategies to maximize returns while managing risks effectively. Key Responsibilities: Develop and implement investment strategies aligned with company goals and risk tolerance Conduct thorough market research and financial analysis to identify potential investment opportunities Monitor and evaluate the performance of existing investments and make recommendations for adjustments Prepare detailed investment reports and presentations for senior management and stakeholders Collaborate with finance teams and external advisors to optimize portfolio performance Ensure compliance with relevant financial regulations and company policies Stay updated on economic trends and industry developments affecting investment decisions <br><br>Requirements<br><br> Bachelor's degree in Finance, Economics, Business Administration, or related field; Master's degree preferred Proven experience as an Investment Manager or similar role Strong knowledge of financial markets, instruments, and investment strategies Excellent analytical and decision-making skills Proficiency in financial modeling and portfolio management software Strong communication and presentation skills Ability to work independently and manage multiple priorities Relevant certifications such as CFA are highly desirable

We're Hiring: Senior Sales Executive We are looking for an experienced B2B sales professional to drive business growth, build strategic client relationships, and expand our presence across the industrial sector. Location: Dammam, Eastern Province, Saudi Arabia<br>Job Purpose Lead business development activities by generating new opportunities, managing the full sales cycle, and growing key industrial accounts for calibration, testing, and inspection services. This role is ideal for a results-driven sales professional with a proven track record in industrial B2B sales. Key Responsibilities Develop and close new business opportunities across industrial clients. Manage the full sales cycle from prospecting to closing. Build strong relationships with procurement, QA/QC, and maintenance teams. Follow up on quotations and convert opportunities into revenue. Coordinate with technical teams to deliver accurate proposals and solutions. Maintain CRM records, sales forecasts, and pipeline reports. Support and mentor junior sales team members. Requirements4–5+ years of B2B sales experience in Saudi Arabia. Experience in calibration, testing, inspection, instrumentation, or other industrial technical services is highly preferred. Proven success selling to plants, factories, oil & gas, petrochemical, or manufacturing clients. Existing network within the Eastern Province is a strong advantage. Fluent in Arabic and English. Valid Saudi driving license.

Company Name: Mastek Onsite - Ready to travel onsite AMEA – Riyadh Location.<br>Experience Level – 5 to 8 Years Experience in SAP Business Objects (SAP BO) along with Power BI, as the customer has a roadmap to migrate reports from SAP BO to Power BI. Python expertise is also required. Core Banking Experience Must. Dashboard & Report Development — Design, develop, and maintain interactive Power BI dashboards and reports that convert complex data into clear, decision-ready insights. Data Modelling & Transformation — Integrate multiple data sources, build efficient data models, and apply Power Query and DAX to ensure accuracy, consistency, and reporting-readiness. Governance & Security — Implement Row-Level Security, enforce data governance standards, and ensure all reports meet compliance and audit requirements. Performance Optimisation — Monitor and tune report and dataset performance to maintain fast load times, reliable refresh cycles, and a stable analytics environment. Stakeholder Engagement — Collaborate with business units to capture requirements, iterate on designs, and ensure delivered solutions drive real adoption and value. Continuous Improvement — Proactively identify enhancements, retire redundant reports, and keep analytics outputs aligned with evolving business and data platform needs. Platform Administration — Manage Power BI Service workspaces, datasets, gateway configuration, and production deployments to ensure a well-governed analytics environment.