Technical Analysts Jobs in Saudi

Khidmah is seeking a skilled and motivated ELV Technician to join our Facilities Management team in Abqaiq. The successful candidate will be responsible for the installation, maintenance, troubleshooting, and repair of Extra Low Voltage (ELV) systems, ensuring all systems operate safely, efficiently, and in accordance with company and client standards.<br><br>Key Responsibilities Install, maintain, inspect, and repair ELV systems, including:CCTV Systems Access Control Systems Fire Alarm Systems Public Address (PA) Systems Structured Cabling Intrusion & Security Systems Intercom Systems Perform preventive and corrective maintenance on ELV equipment. Diagnose faults and resolve technical issues efficiently to minimize downtime. Conduct routine inspections and testing to ensure system reliability and compliance. Read and interpret technical drawings, wiring diagrams, and schematics. Coordinate with supervisors and other maintenance teams to complete assigned work orders. Ensure all work is carried out in compliance with safety regulations and company procedures. Maintain accurate maintenance records and prepare service reports. Respond promptly to emergency maintenance requests when required. Ensure tools, equipment, and materials are properly maintained and used safely.<br>Requirements Diploma in Electronics, Electrical Engineering, or a related technical field. Minimum 5 years of experience in ELV systems maintenance and installation. Previous Facilities Management (FM) experience is mandatory. Valid Saudi driving license is mandatory. Strong knowledge of ELV systems, troubleshooting, and preventive maintenance. Ability to read technical drawings and electrical schematics. Good communication and problem-solving skills. Ability to work independently and as part of a team. Willingness to work on-site and respond to emergency maintenance requirements when needed.

Khidmah is seeking a skilled and motivated ELV Technician to join our Facilities Management team in Abqaiq. The successful candidate will be responsible for the installation, maintenance, troubleshooting, and repair of Extra Low Voltage (ELV) systems, ensuring all systems operate safely, efficiently, and in accordance with company and client standards.<br><br>Key Responsibilities Install, maintain, inspect, and repair ELV systems, including:CCTV Systems Access Control Systems Fire Alarm Systems Public Address (PA) Systems Structured Cabling Intrusion & Security Systems Intercom Systems Perform preventive and corrective maintenance on ELV equipment. Diagnose faults and resolve technical issues efficiently to minimize downtime. Conduct routine inspections and testing to ensure system reliability and compliance. Read and interpret technical drawings, wiring diagrams, and schematics. Coordinate with supervisors and other maintenance teams to complete assigned work orders. Ensure all work is carried out in compliance with safety regulations and company procedures. Maintain accurate maintenance records and prepare service reports. Respond promptly to emergency maintenance requests when required. Ensure tools, equipment, and materials are properly maintained and used safely.<br>Requirements Diploma in Electronics, Electrical Engineering, or a related technical field. Minimum 5 years of experience in ELV systems maintenance and installation. Previous Facilities Management (FM) experience is mandatory. Valid Saudi driving license is mandatory. Strong knowledge of ELV systems, troubleshooting, and preventive maintenance. Ability to read technical drawings and electrical schematics. Good communication and problem-solving skills. Ability to work independently and as part of a team. Willingness to work on-site and respond to emergency maintenance requirements when needed.

Syarah is on a mission to change how people buy their cars in Saudi and the Middle East. We offer buyers an end-to-end digital car buying experience where they can buy their next car from the comfort of their living rooms. Under the hood, we build systems to manage sourcing of cars, inspection, photography, merchandising, reconditioning, financing, insurance, shipping and many more. Our goal is to turn car buying into an experience of delight, comfort and peace of mind.<br><br>We are on the lookout for ambitious, competitive, growth-minded professionals to help us continue to harness technology to delight our customers and achieve our ambitious growth objectives in the auto sector.<br><br>Requirements<br><br>Uses diagnostic equipment as an aid in locating vehicle defects Has experience in road testing vehicles and determining the faults Coordinates the activities of subordinates Inspects work performed by Automotive technicians Leading technical skills and personality traits<br><br>Education & Skills:<br><br>BA or diploma in auto mechanic or any related field5+ year experience in automotive industry/ 2 years minimum as a team leader/supervisor Has experience in leading technicians at least for 2 years Leadership skills Hands on Technical experience in automotive industry

Company Description King Abdulaziz University Hospital is a major teaching and healthcare institution located in Jeddah, serving a wide range of patients from the local community and beyond. The hospital is known for its commitment to high-quality clinical care, education, and research, supporting the development of healthcare professionals across multiple specialties. Dental services are an important part of the hospital’s patient care offerings, combining advanced technology with evidence-based practices. Team members benefit from a collaborative environment that encourages continuous learning and professional growth. Role Description The Dental Laboratory Technician is responsible for fabricating, repairing, and adjusting dental prostheses and appliances in support of the hospital’s dental clinics. Day-to-day tasks include creating dentures and other restorative devices from impressions, models, and digital scans, as well as preparing, pouring, and trimming casts. The role involves selecting and handling materials, operating laboratory equipment, maintaining accurate records of work performed, and adhering to infection control and safety protocols. The technician will collaborate closely with dentists and other oral healthcare professionals to ensure precise fit, function, and esthetics of all dental prostheses. This is a contract, on-site role based at King Abdulaziz University Hospital in Jeddah. Qualifications Strong laboratory skills, including handling materials, operating dental lab equipment, and following standardized procedures. Demonstrated knowledge of dental technology, prosthodontic materials, and fabrication techniques for fixed and removable appliances. Understanding of dentistry principles and the clinical requirements for dentures and other restorative devices. Experience working as a laboratory technician or dental laboratory technician, including fabrication and adjustment of dentures. Formal training or diploma in Dental Technology or a related field; relevant professional certifications are an asset. Attention to detail, manual dexterity, and ability to follow technical instructions and work from impressions and prescriptions. Commitment to infection control, quality assurance, and safety standards in a clinical laboratory environment. Effective communication skills and ability to collaborate with dentists and other oral healthcare team members. Ability to manage time, prioritize multiple cases, and meet deadlines in a busy hospital setting.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Job Summary</b></p><p>We are seeking a skilled and experienced Smart Home Technician . The ideal candidate will have hands-on experience in installing, configuring, troubleshooting, and maintaining Smart Home systems and devices. This is a technical field role suited for candidates with practical expertise rather than a university-based engineering background. The selected candidate will work directly on-site to support residential and/or commercial Smart Home projects and ensure high-quality system functionality and customer satisfaction.</p><p><b>Key Responsibilities</b></p><ul><li>Install, configure, and commission Smart Home systems and devices.</li><li>Perform maintenance, troubleshooting, repairs, and upgrades of installed systems.</li><li>Integrate and support various Smart Home technologies including:<ul><li>Smart lighting systems</li><li>Smart switches and controls</li><li>Home automation platforms</li><li>Smart security and surveillance systems</li><li>Smart locks and access control</li><li>Audio/video and entertainment integration</li><li>Smart HVAC and environmental control systems</li></ul></li><li>Conduct site inspections and technical assessments before installation.</li><li>Diagnose and resolve technical issues efficiently.</li><li>Ensure installations meet quality, safety, and project standards.</li><li>Provide technical support and guidance to end users when required.</li><li>Coordinate with project teams and supervisors during execution.</li><li>Maintain accurate service reports and installation documentation.</li><li>Stay updated with emerging Smart Home technologies and industry practices.</li></ul><p><b>Requirements</b></p><p><b>Education</b></p><p>Diploma in Electrical, Electronics, Automation, Telecommunications, or a related technical field is preferred. University degree is not mandatory.</p><p><b>Experience</b></p><ul><li>Minimum 3 5 years of relevant experience in Smart Home systems installation, maintenance, or technical support.</li><li>Mandatory: Previous working experience in the Kingdom of Saudi Arabia (KSA).</li><li>Proven hands-on experience with Smart Home technologies and integrated systems.</li><li>Experience in residential or commercial automation projects is preferred.</li></ul><p><b>Technical Skills</b></p><ul><li>Strong knowledge of Smart Home devices and automation systems.</li><li>Ability to read technical drawings and wiring diagrams.</li><li>Understanding of low-current systems and structured cabling.</li><li>Familiarity with networking fundamentals and device connectivity.</li><li>Experience with troubleshooting hardware and system integration issues.</li><li>Ability to use installation and maintenance tools safely and effectively.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><b>Candidate Profile</b></p><ul><li>Strong problem-solving and troubleshooting skills.</li><li>Good communication and teamwork abilities.</li><li>Ability to work on-site and travel within KSA if required.</li><li>Professional, organized, and customer-oriented.</li></ul><p></p></section>

Saudi Arabia ( SAUDI ARABIA )<br><br>20/06/2026 5:19 PM<br><br>Pump Technician<br><br>Job Code: JB00111579<br><br>Easy application process, usually takes less than 1 minutes.<br><br>This opportunity is exclusively open to India candidates.<br><br>New Posted on - 20/06/2026 5:19 PM<br><br>Job Requirement<br><br>Position<br><br>Pump Technician<br><br>Industry<br><br>Oil and Gas - Pipeline Project<br><br>Qualification<br><br>Diploma<br><br>Qualification Specialization<br><br>Mechanical<br><br>Job Location<br><br>Saudi Arabia ( SAUDI ARABIA )<br><br>Experience<br><br>5 - 8 yrs<br><br>Yearly Salary<br><br>Negotiable in SAR<br><br>key skills<br><br>Pump Operation, Mechanical Repair, Electrical Systems, Hydraulic Systems, Troubleshooting, Reading blueprints<br><br>Job Description<br><br>Job Title<br><br>Pump Technician<br><br>Description<br><br>SAUDI ARABIA – REQUIRED FOR REPUTED COMPANY<br><br>PUMP TECHNICIAN - 10 NOS.<br><br>The ideal candidate will be responsible for the installation, maintenance, troubleshooting, and repair of water pump systems within facility management operations. <br><br>Diploma in Mechanical Engineering or a related technical field (mandatory). <br><br>Minimum 5 years of experience as a Pump Technician or in a similar role. Strong knowledge of water pumps, motors, and mechanical maintenance. Basic electrical knowledge related to pump operations and controls is required. Accommodation and Transportation will be provided by the company.<br><br>SHORTLISTING FROM 20TH JUNE TO 24TH JUNE 2026<br><br>ONLINE / VIRTUAL INTERVIEW SHORTLY.<br><br>20.06.2026. <br><br>Interview Details<br><br>Not Available<br><br>Company Profile : ASMACS<br><br>ASMACS’ global network and the infrastructure facilities spread across the Indian Sub-continent and Arabian Gulf Region play a dominant role in the growth of ASMACS Group business.<br><br>Company Address<br><br>411, Sai Chamber, 4th Floor, Opp. Railway Station, Santacruz (E), Mumbai - 400 055, India Tel.:+91 22 26125301 / 26125191 26185509/26150933 / 26180997 Fax: +91 22 26147103 / 26146937 Email: asmacs@asmacs.net<br><br>Skills: Pump Operation, Mechanical Repair, Electrical Systems, Hydraulic Systems, Troubleshooting, Reading blueprints

<p>To carry out field-based mechanical maintenance, installation, and repair of equipment such as pumps and related systems, ensuring safe operation, proper functioning, and timely completion of service assignments.</p><p>Perform field service activities including installation, dismantling, and assembly of mechanical equipment. Carry out maintenance and repair of pumps, pipelines, valves, and related systems.Use hand tools, chain wrenches, and mechanical equipment for service work. Troubleshoot and support resolution of mechanical system issues at site locations. Assist with drilling and other site-related mechanical operations when required. Transport, handle, and manage tools, equipment, and materials at work sites. Work in outdoor environments under varying weather conditions. Ensure proper functioning of equipment after maintenance or repair. Follow technical instructions, safety procedures, and maintenance standards. Maintain cleanliness and organization of tools and work areas. Complete assigned field tasks safely, efficiently, and within timelines.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum 3 5 years of experience in mechanical maintenance, field service, or equipment installation. Experience using hand tools, chain wrenches, and mechanical service equipment. Knowledge of pumps, pipelines, valves, and water-related mechanical systems. Ability to understand basic technical drawings and maintenance instructions. Technical Diploma or equivalent qualification in Mechanical Engineering or related field (preferred). Physically fit and capable of performing outdoor and field-based mechanical work.</p>

Career Overseas Consultants Ltd. is looking for Air Conditioner & Refrigerator Technician<br>Job Description / Responsibility Install, commission, and test air conditioning and refrigeration systems. Perform preventive and corrective maintenance on HVAC and refrigeration equipment. Diagnose and repair electrical, mechanical, and control system faults. Inspect and service compressors, condensers, evaporators, expansion valves, thermostats, and fan motors. Conduct refrigerant charging, recovery, leak detection, and pressure testing. Read and interpret technical drawings, wiring diagrams, and equipment manuals. Monitor system performance and recommend improvements to enhance efficiency. Replace defective parts and components as required. Ensure all maintenance activities comply with safety regulations and environmental standards. Maintain accurate maintenance records and prepare service reports. Respond to emergency breakdowns and perform troubleshooting activities. Coordinate with supervisors and other maintenance personnel to complete assigned tasks.<br>Educational Requirements SSCHSCDiploma Technical Diploma, Trade Certificate, or Vocational Training in Air Conditioning & Refrigeration Technology.<br>Experience Requirements2 to 5 year(s) The applicants should have experience in the following business area(s): Training Institutes, Engineering Firms, Real Estate, Developer<br>Additional Requirements Relevant work experience in HVAC or refrigeration maintenance will be preferred. HVAC Technician Certification. Refrigeration & Air Conditioning Trade Certificate Occupational Health & Safety Training Certificate Sound knowledge of HVAC and refrigeration systems, components, and controls. Ability to troubleshoot electrical and mechanical equipment. Familiarity with refrigerants, recovery procedures, and safety practices. Ability to read technical manuals and wiring diagrams.* Good communication and teamwork skills. Strong problem-solving and analytical abilities. Ability to work under pressure and meet maintenance schedules. Ability to work at heights, in confined spaces, and under varying weather conditions. Ability to lift and carry tools, equipment, and spare parts. Physically fit to perform maintenance and repair activities.<br>Job Location Saudi Arabia

We are seeking a skilled Cleaning Technician with experience working in a Post Weld Heat Treatment (PWHT) plant. The successful candidate will be responsible for cleaning industrial equipment, components, and work areas while ensuring compliance with safety, quality, and operational standards. The role requires knowledge of industrial cleaning methods and experience working in fabrication or heat treatment environments. Key Responsibilities<br><br>Perform cleaning of PWHT furnaces, fixtures, tools, piping, and associated equipment. Clean fabricated components before and after PWHT using approved methods and materials. Remove scale, rust, oil, grease, and other contaminants from metal surfaces. Operate industrial cleaning equipment, including pressure washers, vacuum systems, and hand tools. Maintain cleanliness of work areas, workshops, and storage locations. Dispose of waste materials in accordance with company procedures and environmental regulations. Support PWHT operations by preparing equipment and work areas for production. Qualifications<br><br>High school diploma or equivalent. Certificate in industrial cleaning or related technical field is an advantage. Experience<br><br>Minimum 2-5 years of experience as a Cleaning Technician in an industrial, fabrication, refinery, or PWHT plant environment. Experience working with heavy industrial equipment and metal components. Familiarity with industrial cleaning chemicals and safe handling practices. Skills & Competencies<br><br>Knowledge of industrial cleaning techniques and equipment. Understanding of PWHT plant operations and fabrication environments. Awareness of HSE standards and safe work practices. Ability to work independently and as part of a team. Good physical fitness and ability to work in demanding industrial environments. Basic communication and reporting skills. Working Conditions

Company Description Prestige is a diversified service provider offering tailored parking solutions, valet parking, hospitality and catering, transportation, traffic management, limousine services, and transport bus services. The organization focuses on delivering reliable, high-quality services to clients in various sectors, emphasizing safety, professionalism, and customer satisfaction. Team members work in dynamic environments where efficient operations and strong service standards are essential. Prestige values people who are committed to learning, growth, and contributing to smooth, well-managed services. Joining Prestige offers exposure to multiple service lines and opportunities to develop practical skills in a supportive setting.<br>Role Description The Air Conditioning Technician internship at Prestige is an on-site role based in Dammam. The intern will assist in inspecting, installing, maintaining, and repairing air conditioning units and related ventilation systems across company facilities and vehicles as needed. Daily tasks include supporting routine checks, identifying basic operational issues, performing minor repairs under supervision, and ensuring that equipment operates safely and efficiently. The intern will help document maintenance activities, follow safety and quality guidelines, and coordinate with senior technicians and other team members to minimize downtime. This internship is designed to provide practical, hands-on experience and exposure to professional maintenance processes.<br>Qualifications<br> Candidates should possess skills in Equipment Maintenance and Maintenance, with a basic understanding of HVAC systems. Candidates should possess skills in Preventive Maintenance, focusing on routine inspections and scheduled servicing. Candidates should possess skills in Troubleshooting and Maintenance & Repair to identify and resolve equipment issues safely. Basic technical education or certification in HVAC, mechanical, or electrical fields is preferred. Ability to read and follow technical instructions, safety procedures, and maintenance documentation. Strong attention to detail, reliability, and willingness to learn from experienced technicians. Ability to work on-site in Dammam and adapt to a service-oriented, operational environment.

???? We're Hiring | Microwave Installation Technician???? Location: Various Project Sites Across Saudi Arabia We are looking for an experienced Microwave Installation Technician to join our growing telecommunications team. If you have strong hands-on experience in microwave radio installation, commissioning, antenna alignment, and RF troubleshooting, we'd like to hear from you. Key Responsibilities Install and commission Point-to-Point (PTP) and Point-to-Multipoint (PMP) microwave radio systems. Install microwave antennas, radios, mounts, brackets, grounding systems, fiber optic, and SFTP cabling. Perform antenna alignment and optimize RF performance to achieve target RSSI, SNR, CINR, and link stability. Configure microwave radios, frequencies, bandwidth, VLANs, QoS, and network parameters. Conduct RF, throughput, latency, jitter, and packet loss testing. Integrate microwave links with fiber backbone networks and verify connectivity. Troubleshoot RF interference, signal degradation, alignment, and connectivity issues. Prepare commissioning reports, test results, and site handover documentation. Ensure compliance with telecom engineering standards, HSE regulations, and work-at-height safety requirements. Requirements✅ Diploma or Bachelor's degree in Telecommunications, Electronics, or a related field.✅ 5–7 years of hands-on experience in microwave radio installation, commissioning, and integration.✅ Strong knowledge of PTP/PMP wireless communication systems.✅ Practical experience with antenna installation, RF optimization, fiber optic connectivity, and network infrastructure deployment.✅ Ability to configure microwave radios, VLANs, IP addressing, and QoS parameters.✅ Experience using RF testing and installation tools, including spectrum analyzers, cable testers, and alignment devices.✅ Ability to read and interpret technical drawings and engineering diagrams.✅ Good command of English (written and spoken).✅ Valid Saudi Light Vehicle Driving License is mandatory. If you meet the above qualifications and are ready to join a dynamic and professional team, we encourage you to apply.???? Apply by sending your CV to: mohammed.mekky@enpro.com.sa???? WhatsApp: +966 53 088 9264 ((CVs only)#Hiring #Microwave Technician #Telecommunications #RF #Microwave #Wireless Networks #PTP #PMP #Fiber Optics #Saudi Arabia #Jobs #Telecom Jobs #Engineering Jobs

Join Legend Motor Works Now Legend Motor Works is a new independent luxury automotive service center based in Riyadh, Saudi Arabia. Our mission is simple: to become the Middle East's benchmark independent specialist for Aston Martin and other exceptional British luxury automobiles. We are building a workshop founded on factory-level expertise, uncompromising quality, and meticulous craftsmanship—not volume. We are seeking an exceptional Aston Martin Master Technician to help build this vision from the ground up.<br><br>Mandatory Requirement Applicants must have current or previous experience working at an Authorized Aston Martin Dealership with experience using the official Aston Martin Diagnostic System (AMDS). This is a mandatory requirement. Applications from candidates without authorized Aston Martin dealership experience will not be considered.<br><br>Responsibilites Perform advanced diagnostics and fault finding Carry out scheduled maintenance and major repairs Diagnose complex electrical and CAN Bus systems Engine and transmission repair Vehicle inspections and health reports Mentor future technicians Maintain factory-quality workmanship Support workshop development and technical processes<br><br>Required Qualifications8+ years of Aston Martin dealership experience Factory-trained Aston Martin technician Expert in Aston Martin diagnostics Strong understanding of Aston Martin workshop procedures Experience with V8 and V12 Aston Martin models Excellent English communication Close attention to detail Professional attitude Valid driving licence<br><br>Preferred Experience AMDS (Aston Martin Diagnostic System) Gaydon-era Aston Martins (DB9, Vantage, Virage, Rapide, Vanquish) DB11DBS Superleggera New Vantage DBXWorkshop leadership experience<br><br>What We Offer Competitive tax-free salary Well-built housingfree transportation Medical insurance Annual international flight tickets Hajj for free Performance bonus Long-term career growth Opportunity to build a world-class independent Aston Martin specialist Modern workshop and premium equipment Professional and respectful working environment Relocation support (where applicable)<br><br>Skills Diagnostics Mechanical Repair Electrical Diagnostics CAN Bus Engine Rebuild Transmission Repair Workshop Leadership Problem Solving Customer Focus Attention to Detail

Job Title: Smart Home Technician<br><br>Location: Kingdom of Saudi Arabia (On-site)<br><br>Department: Smart Homes<br><br>Job Summary<br><br>We are seeking a skilled and experienced Smart Home Technician . The ideal candidate<br><br>will have hands-on experience in installing, configuring, troubleshooting, and maintaining<br><br>Smart Home systems and devices. This is a technical field role suited for candidates with<br><br>practical expertise rather than a university-based engineering background.<br><br>The selected candidate will work directly on-site to support residential and/or commercial<br><br>Smart Home projects and ensure high-quality system functionality and customer<br><br>satisfaction.<br><br>Key Responsibilities<br><br> Install, configure, and commission Smart Home systems and devices Perform maintenance, troubleshooting, repairs, and upgrades of installed systems Integrate and support various Smart Home technologies including:Smart lighting systems Smart switches and controls Home automation platforms Smart security and surveillance systems Smart locks and access control Audio/video and entertainment integration Smart HVAC and environmental control systems Conduct site inspections and technical assessments before installation Diagnose and resolve technical issues efficiently Ensure installations meet quality, safety, and project standards Provide technical support and guidance to end users when required Coordinate with project teams and supervisors during execution Maintain accurate service reports and installation documentation Stay updated with emerging Smart Home technologies and industry practices<br><br>Requirements<br><br>Requirements<br><br>Education<br><br> Diploma in Electrical, Electronics, Automation, Telecommunications, or a related<br><br>technical field is preferred.<br><br> University degree is not mandatory<br><br>Experience<br><br> Minimum 3-5 years of relevant experience in Smart Home systems installation,<br><br>maintenance, or technical support.<br><br> Mandatory: Previous working experience in the Kingdom of Saudi Arabia (KSA) Proven hands-on experience with Smart Home technologies and integrated<br><br>systems.<br><br> Experience in residential or commercial automation projects is preferred<br><br>Technical Skills<br><br> Strong knowledge of Smart Home devices and automation systems Ability to read technical drawings and wiring diagrams Understanding of low-current systems and structured cabling Familiarity with networking fundamentals and device connectivity Experience with troubleshooting hardware and system integration issues Ability to use installation and maintenance tools safely and effectively<br><br>Candidate Profile<br><br> Strong problem-solving and troubleshooting skills Good communication and teamwork abilities Ability to work on-site and travel within KSA if required Professional, organized, and customer-oriented

<p>About the Role</p><p>A well-established optical Lab in and seeking an experienced Lens Edger Technician. The successful candidate will operate advanced lens cutting equipment and play a key role in delivering high-quality prescription eyewear to customers.</p><p>Key Responsibilities</p><ul><li>Operate automated tracer-edger machines to cut and shape lenses for various frame types (full-rim, semi-rimless, and rimless)</li><li>Read and accurately interpret prescriptions (SPH, CYL, AXIS, ADD, PD)</li><li>Mount lenses into frames with precision, ensuring proper fit and alignment</li><li>Perform drilling and groove cutting for rimless and semi-rimless frames</li><li>Conduct quality control checks on every order before completion</li><li>Maintain edging equipment, perform daily cleaning, and report technical issues</li><li>Manage lens inventory and notify management of low stock levels</li><li>Maintain accurate production records</li><li>Handle progressive lenses, high-index lenses, polarized lenses, and Trivex materials</li></ul><p>Required Qualifications</p><ul><li>Minimum 3 years of hands-on experience operating automated lens edging machines (Briot, Essilor, Nidek, or similar)</li><li>Strong understanding of optical prescriptions and lens types</li><li>Experience with rimless and semi-rimless frame mounting (drilling, grooving)</li><li>Knowledge of various lens materials (CR-39, polycarbonate, high-index, Trivex)</li><li>High attention to detail and commitment to quality</li><li>Ability to work efficiently under daily volume pressure</li><li>Valid Saudi residency (Iqama) — sponsorship transfer required</li><li>Basic English or Arabic communication skills</li></ul><p>Preferred Qualifications</p><ul><li>Direct experience with tracer-edger systems</li><li>Knowledge of optical lab workflow and quality standards</li><li>Ability to troubleshoot common edging issues independently</li><li>Reliability and consistency in production output</li></ul><p>What We Offer</p><ul><li>Sponsorship transfer (kafala) provided</li><li>GOSI registration and medical insurance</li><li>Annual paid leave</li><li>End-of-service benefits as per Saudi labor law</li><li>Modern equipment and clean working environment</li></ul><p>Compensation Structure</p><ul><li>Base salary: To be discussed based on experience</li><li>Performance review after 3-month probation period</li></ul>

Job Summary<br>The Laboratory Technician is responsible for performing routine analysis in one of the divisions of Clinical Laboratory and blood bank department under supervision of the Senior Medical Technician staff.<br>May rotate through various laboratory sections in order to keep familiar with those laboratory procedures which may be ordered on an emergency basis when working shifts.<br>Major Duties and Responsibilities<br>Ensures through his actions, either directly or indirectly, that a superior quality of medical treatment, compassion and understanding is given to every patient served at the Riyadh care Hospitals and Clinics. Performs duties in the laboratory on-call /shift roster for week-days, week-ends and during public holidays.<br>Receives or obtains specimen in aseptic conditions for laboratory testing.<br>Prepares specimens for testing and assesses the integrity of clinical specimens as per policies prior to testing.<br>Creates daily worksheets activities according to diagnostic applications.<br>Performs routine and of moderate complexity testing and analyses according to SOPs and QC assessment.<br>Prepares common use reagents and starts the daily calibration of equipments for daily routine activities.<br>Performs regular assessment of equipments of common use by measurements of indicators as per laboratories procedures.<br>Evaluates new procedures or methods under direct supervision of department Senior Technician.<br>Performs daily calibration and maintenance of equipments and sustains documents of all activities.<br>Follows approved procedures to ensure laboratory quality control and compliance with standards of practice.<br>Maintains accurate records of QC and patient results.<br>Identifies and reports deficiencies either technical or managerial to Senior Technician / Chief Technician.<br>Participates in the solving-process of laboratory trouble-shooting.<br>Sustains appropriate common reagents and products inventory for laboratory activities.<br>Adheres to quality system approach of laboratory activities.<br>Validates and accepts laboratory results under supervision prior to release through Laboratory Information System.<br>Participates in the orientation and training of new technicians.<br>Working time may include night shifts and rotating weekends and holidays as per the organization of the department.<br>Responsible to educate patients /families as per their needs and to implement their whole role regarding patient / family education process as mention in patient & family education policy and procedure (NSP-GEN-014) including documentation in patient medical record. They are knowledgeable about their essential role in patient and family education.<br>Ensures the protection of patients’ health information.<br>Reporting to<br>Senior Technician of the section Chief Technician<br>Supervises<br>NONE<br>Qualifications:<br>A minimum of:<br>Education:Bachelor’s Degree/ ore equivalent from an approved school of medical Technology, College or University. Current registration with the designated authority for Medical Technologist / Technician from country of origin/ recruitment + license of Ministry of Health (MOH) in Saudi Arabia. Experience:<br>Required Two (1) year experience similar to the post.<br>Special Requirements/ Skills:<br>Fluency in verbal and written English. Exhibits professionalism and excellent interpersonal communication skills. Working knowledge of computer skills. Knowledge of current proficiency testing and quality control.<br>Seniority Level Entry level Industry Hospitals and Health Care Hospitals Employment Type Full-time Job Functions Health Care Provider Skills English Laboratory Skills Analytical Skills Standard Operating Procedure (SOP) Computer Literacy Quality Control Medical Technology Recruiting Patient Education Trouble

Job Title Maintenance MEP Technician.<br>Job Purpose The Maintenance MEP Technician is responsible for ensuring the efficient and safe operation of the organization's mechanical, electrical, and plumbing (MEP) systems within the facilities. The role involves inspecting, troubleshooting, repairing, maintaining, and installing MEP systems and equipment to ensure business continuity, operational efficiency, and compliance with safety standards.<br>Key Roles & Responsibilities Inspect, maintain, and repair mechanical, electrical, and plumbing (MEP) systems and equipment. Perform preventive and corrective maintenance on HVAC systems, electrical systems, plumbing systems, pumps, motors, lighting, control panels, water supply, and drainage systems. Diagnose faults and perform repairs to minimize equipment downtime. Install, replace, and upgrade MEP equipment and components as required. Assist in the installation and commissioning of new MEP systems during facility upgrades and expansion projects. Monitor the performance of HVAC, electrical, and plumbing systems and recommend improvements. Ensure compliance with company policies, local regulations, and safety standards related to MEP maintenance. Maintain maintenance records and report equipment failures and completed work. Coordinate with contractors and suppliers when specialized maintenance is required. Respond promptly to emergency maintenance requests. Ensure proper use of tools, equipment, and personal protective equipment (PPE). Perform any other duties assigned by the direct manager.<br>Overall Qualifications Qualifications High School Diploma, Technical Diploma, or equivalent. Technical certification in MEP, Mechanical, Electrical, HVAC, or Plumbing is preferred.<br>Work Experience5+ years of experience in facility maintenance, building maintenance, or MEP maintenance in commercial or industrial environments.

APICO – Arabian Plastic Industrial Co. is looking for a qualified Mechanical Technician to join our Maintenance team in Jeddah. Key Responsibilities:Inspect, repair, and maintain mechanical systems, machinery, and production equipment. Perform preventive maintenance to minimize equipment breakdowns. Troubleshoot and resolve mechanical faults. Install new machines, components, and mechanical systems. Align and calibrate mechanical parts, including shafts, bearings, and gears. Ensure maintenance activities comply with safety and quality standards. Maintain accurate records of repairs, spare parts, and maintenance history. Coordinate with electrical and automation teams to resolve complex technical issues. Requirements:Diploma in Mechanical Engineering, Industrial Maintenance, or equivalent.2–4 years of experience in mechanical maintenance, preferably within a manufacturing or industrial environment. Strong knowledge of hydraulic, pneumatic, and rotating equipment. Ability to read and interpret mechanical drawings and manuals. Skilled in using hand tools, power tools, and precision instruments. Strong troubleshooting and problem-solving skills. Knowledge of mechanical maintenance safety procedures. Arabic & English language skills are preferred. Location: Jeddah, Saudi Arabia Employment Type: Full-time | On-site

About the Client:Our client is a leading company in the railway industry, seeking an experienced Mechanical Technician to support railway maintenance and operational projects in Saudi Arabia.<br>About the Role:Perform preventive and corrective maintenance on mechanical systems to ensure the safe and reliable operation of railway systems.<br>Responsibilities:Perform preventive and corrective maintenance of mechanical systems and equipment. Carry out maintenance of MEP systems. Diagnose and repair mechanical faults. Conduct inspections and preventive maintenance activities. Comply with safety regulations and maintenance standards. Prepare maintenance reports and documentation.<br>Qualifications:Technical Diploma in Mechanical Engineering or a related field. Minimum 4 years of relevant experience. Experience in railway maintenance. Experience with MEP systems. Fluent in English.

About the Client:Our client is a leading company in the railway industry, seeking an experienced Mechanical Technician to support railway maintenance and operational projects in Saudi Arabia.<br>About the Role:Perform preventive and corrective maintenance on mechanical systems to ensure the safe and reliable operation of railway systems.<br>Responsibilities:Perform preventive and corrective maintenance of mechanical systems and equipment. Carry out maintenance of MEP systems. Diagnose and repair mechanical faults. Conduct inspections and preventive maintenance activities. Comply with safety regulations and maintenance standards. Prepare maintenance reports and documentation.<br>Qualifications:Technical Diploma in Mechanical Engineering or a related field. Minimum 4 years of relevant experience. Experience in railway maintenance. Experience with MEP systems. Fluent in English.

HVAC Technician – Facilities Management / Building Maintenance We are hiring an HVAC Technician to support the operation and maintenance of HVAC systems within building facilities. This role is suitable for a technician with hands-on experience in Facilities Management, building maintenance, HVAC maintenance, MEP projects. The candidate must have practical experience in building facilities, not only installation or construction work.<br><br>Role Summary The HVAC Technician will be responsible for operating, inspecting, maintaining, troubleshooting, and repairing HVAC systems and equipment in building facilities. The role includes preventive maintenance, corrective maintenance, responding to maintenance calls, identifying faults, requesting spare parts, and ensuring HVAC systems remain in proper operational condition. The internal JD highlights operation and maintenance of HVAC systems, regular inspection, preventive and corrective maintenance, troubleshooting, responding to maintenance calls, and testing/commissioning when required<br>.<br>Key Responsibilities Conduct preventive and corrective maintenance for HVAC systems in building facilities. Inspect HVAC systems and equipment regularly and report findings. Troubleshoot and repair HVAC mechanical and electrical faults. Work on DX and chilled water systems, including split units, packaged units, ducted split systems, VRV/VRF, AHU, FCU, CAV/VAV, and related HVAC equipment. Replace or repair HVAC controls and electronic components when required. Install or repair refrigerant lines, chilled water lines, make-up lines, and drain lines. Respond quickly to maintenance calls and resolve issues within required time. Identify required spare parts and support spare parts requests. Support testing and commissioning activities when applicable. Maintain basic maintenance records, registers, and reports. Follow all site safety procedures, PPE requirements, LOTO, isolation, risk assessment, and work permit procedures. Support supervisors and engineers in planning and completing maintenance tasks. Ensure work is completed according to project SLA and quality standard<br>s.<br>Requirements Technical diploma or certificate in HVAC, Refrigeration, Air Conditioning, Mechanical, or related field. Experience in Facilities Management, building maintenance, HVAC maintenance. Must have experience in building facilities such as towers, malls, hospitals, hotels, compounds, universities, airports, commercial buildings, or large facilities. Good knowledge of refrigeration and air conditioning systems. Practical experience with DX and chilled water HVAC systems. Ability to use standard HVAC tools and instruments. Ability to troubleshoot common HVAC faults. Basic knowledge of electrical safety related to HVAC maintenance. Good communication skills and ability to follow supervisor instructions. Willingness to work full-time on-site in building faciliti<br>es. Preferred Qualifications Previous FM or O&M project experience. Experience with AHU, FCU, VRV/VRF, split units, packaged units, chilled water systems, and ventilation systems. Knowledge of safety procedures including work permits, LOTO, isolation, PPE, and risk assessment. Ability to prepare simple maintenance reports. Basic computer skil<br>ls.