Swimming Pool Technician Jobs - Jeddah Saudi

<p>Purpose: The solar Pv Site Engineer shall support the execution, installation, testing, commissioning, and technical coordination of Solar PV systems at project sites. The Engineer will ensure that site activities are carried out in accordance with approved drawings, specifications, method statements, applicable international standards, Saudi regulations, SEC requirements, and project requirements. Scope: To provide site engineering and execution support for Solar PV systems Responsibilities: Conduct site visits and surveys and collect required technical information. Review approved PV layouts, SLDs, electrical drawings, cable routes, equipment datasheets, and relevant technical documents before execution. Coordinate daily site activities with supervisors, technicians, subcontractors, suppliers, and the project team. Supervise Solar PV installation activities and monitor compliance with approved drawings and project specifications. Monitor installation of PV modules, mounting structures, inverters, cables, electrical panels, monitoring systems, and associated equipment. Perform site inspections and identify installation or workmanship issues requiring corrective action. Report technical issues, site constraints, and deviations to the Project Manager or direct manager. Coordinate with the design team regarding site conditions or required technical modifications. Verify delivered materials against approved material submittals and report any discrepancies. Support preparation and coordination of inspection requests. Participate in testing and commissioning activities for the Solar PV system. Assist with electrical testing, functional testing, inverter commissioning, and system performance verification. Monitor site progress and prepare regular progress updates and site reports. Maintain site documentation, including: Daily/site reports, Installation records, Inspection records, Testing and commissioning records, Progress photographs, Redline drawings, As-built information Support the preparation of as-built drawings, O&amp;M documentation, testing records, and project handover documents. Follow applicable HSE requirements and immediately report unsafe conditions or practices. Coordinate technical matters with suppliers and manufacturers when required. Maintain good communication with the project team and other relevant parties. Perform other Solar PV site engineering tasks assigned by the direct manager.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>BSc, degree in Electrical or a related discipline.</li><li>1+ yearsu2019 experience in Solar PV/Industrial projects</li><li>Preferred qualifications include being a SEC Certified Installer or Designer.</li><li>Strong technical background.</li><li>Good knowledge at understanding PV Systems reports (PVsyst, Helioscope, and STAAD Pro)</li><li>Have experience in construction, operation, and Monitoring of PV plant.</li><li>Strong knowledge of Safety and Risk assessment.</li><li>Fluency in English required</li></ul><p>Preferred Skills</p><ul><li>Good English writing skills to make comprehensive reports also verbal communication skills.</li><li>Good Technical, analytical, and problem-solving skills.</li><li>Good Knowledge of MS office (Project, Word &amp; PPT, Excel) is required to carry out the job</li></ul>

<h3 >About the Sr. Master Plan Design Manager Role</h3> <p >AECOM is seeking a <strong >Sr. Master Plan Design Manager</strong> to join our team in Jiddah, Makkah, Saudi Arabia. This full-time position involves leading and advising on complex planning initiatives, contributing to projects that shape communities and infrastructure. The role requires a professional with 5-10 years of relevant experience in master plan design and related planning functions, focusing on developing and evaluating strategic plans.</p> <h3 >About AECOM</h3> <p >AECOM is a world-renowned infrastructure consulting firm dedicated to delivering a better world. Our work encompasses improving commutes, ensuring access to clean water, and transforming skylines, all aimed at helping people and communities thrive. With a global team of over 50,000 planners, designers, engineers, and other professionals, we partner with clients to address complex challenges and build lasting legacies for future generations.</p> <h3 >Key Responsibilities</h3> <ul > <li >Develop and evaluate plans and criteria for various projects and activities executed by others.</li> <li >Assess the feasibility and integrity of proposed planning products.</li> <li >Serve as a staff advisor and consultant on technical specialties, facility types, industry practices, equipment, or program functions.</li> <li >Monitor and ensure compliance with relevant local, state, and federal laws.</li> <li >Oversee specialized planning functions, including large-scale new development proposals and environmental studies.</li> <li >Provide comprehensive management for IE-related planning issues.</li> <li >Advise the Planning Director on all matters pertaining to planning.</li> <li >Offer guidance to various councils, boards, commissions, and elected officials on planning-related issues.</li> <li >Evaluate the operations and activities within assigned areas of responsibility.</li> <li >Prepare reports on operations and activities, including recommendations for improvements and modifications.</li> </ul> <h3 >Required Experience</h3> <p >Candidates for the Sr. Master Plan Design Manager position should possess <strong >5 to 10 years of progressive experience</strong> in master plan design, urban planning, or a closely related field. This experience should include a proven track record in developing and evaluating complex planning projects and advising stakeholders.</p> <h3 >Work Environment and Recruitment Process</h3> <p >This is a full-time role based in Jiddah, Makkah, Saudi Arabia. AECOM is committed to maintaining a secure and trustworthy recruitment process. As a condition of employment, all newly hired employees are required to attend an in-person Day 1 onboarding session at an AECOM office location.</p> <h3 >Application Information</h3> <p >We invite qualified candidates to apply for this opportunity. Salary details for this position will be discussed during the interview process.</p>

Premise Taiyo Holding Group is currently looking for experienced Senior Inspectors holding valid Saudi Aramco QM qualifications and/or approvals to join our international network of inspection and quality professionals.<br>We are interested in candidates holding any Saudi Aramco QM certification/approval, across all inspection disciplines and technical specializations.<br>The primary area of assignment will be the Kingdom of Saudi Arabia, with concrete opportunities for selected professionals to also support Taiyo Holding Group projects and inspection activities across the Middle East and Africa.<br>Current residency in the Kingdom of Saudi Arabia is a mandatory requirement.<br>Key Responsibilities Depending on the specific QM qualification, discipline and project assignment, the Senior Inspector may be responsible for:<br>Performing inspection, quality control and quality surveillance activities in accordance with approved ITPs, drawings, specifications, procedures and applicable standards. Monitoring manufacturing, fabrication, construction, installation and testing activities. Witnessing inspections, tests and acceptance activities as required by applicable ITPs and project documentation. Reviewing relevant quality and technical documentation, including drawings, procedures, certificates, test records and inspection reports. Verifying compliance of materials, equipment, workmanship and executed activities with applicable project and Client requirements. Identifying, documenting and reporting non-conformities, deviations and quality issues. Supporting the implementation, verification and follow-up of corrective actions. Preparing accurate and professional inspection reports, quality records and supporting documentation. Coordinating with Clients, Contractors, Subcontractors, Vendors and project teams as required. Ensuring compliance with applicable Quality and HSE requirements. Maintaining high standards of professionalism, integrity, safety and quality throughout the assignment.<br>Mandatory Requirements Valid Saudi Aramco QM qualification and/or approval. Current residency in the Kingdom of Saudi Arabia. Proven experience as an Inspector / Senior Inspector within industrial, Oil & Gas, Energy, Petrochemical or related projects. Degree or Technical Diploma in the relevant engineering or technical discipline. Relevant discipline-specific professional certifications, where applicable. Strong knowledge of applicable international codes, standards and inspection practices. Ability to read and interpret technical drawings, specifications, ITPs, procedures and project documentation. Experience in identifying and reporting non-conformities and following up corrective actions. Ability to prepare clear and professional inspection reports and quality documentation. Good command of written and spoken English. Strong communication, coordination and organizational skills. Ability to work effectively within international and multicultural project environments. Availability and willingness to undertake assignments within Saudi Arabia and, where required, across the Middle East and Africa. Saudi Aramco QM Qualifications<br>Taiyo Holding Group welcomes applications from Senior Inspectors holding any valid Saudi Aramco QM certification or approval. All QM disciplines and qualification categories are of interest.<br>Candidates holding multiple Saudi Aramco QM qualifications are particularly encouraged to apply and should clearly indicate all QM codes/approvals currently held in their application.<br>Assignment Location Primary Location: Kingdom of Saudi Arabia<br>Selected professionals may also be considered for assignments across Middle East & Africa<br>Assignments may vary in location and duration according to Client and project requirements, ranging from individual inspection assignments to medium- and long-term project deployments.<br>How to Apply Qualified candidates are invited to submit:<br>Updated CV;Copies of all Saudi Aramco QM certificates/approvals;Copies of relevant professional and technical certifications;Current location in Saudi Arabia;Availability / earliest starting date;Contact details.<br>Please clearly indicate all Saudi Aramco QM qualification codes currently held.<br>Join Our Network Join Taiyo Holding Group and become part of our international network of qualified inspection and engineering professionals.<br>We are continuously looking for Saudi Aramco QM Certified / Approved Senior Inspectors to support our growing inspection activities in Saudi Arabia, the Middle East and Africa.<br>If you are currently based in Saudi Arabia and hold a valid Saudi Aramco QM qualification, we want to hear from you.<br>Be part of the Taiyo Team and grow with us.

In a world of possibilities, pursue one with endless opportunities. Imagine Next!<p> </p>At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.<p> </p> <p> </p> <p> <u> <b>Job Description:</b> </u> </p> <p>Parsons is looking for a<span> </span> <b>Technical Manager Traffic &amp; Mobility</b> <span> to join our team. In this role, you will lead and deliver traffic engineering and mobility planning projects, ensuring technical excellence, regulatory compliance, and alignment with client objectives. You will manage the full lifecycle of traffic and mobility assignments from concept development and analysis through design, implementation, and performance monitoring while effectively coordinating multi-disciplinary teams and engaging with key stakeholders.</span> </p> <p> </p> <p> <b>What You'll Be Doing:</b> </p> <p> </p> <p> <b>Technical Leadership</b> </p> <ul> <li> <p>Lead the development of traffic and mobility solutions for urban, suburban, and regional networks.</p> </li> <li> <p>Oversee traffic studies, modelling, and analysis (capacity analysis, LOS, intersection design, corridor studies, etc.).</p> </li> <li> <p>Review and validate traffic forecasts, demand modelling, and multimodal transport plans (road, public transport, NMT, micromobility).</p> </li> <li> <p>Ensure adherence to relevant standards, guidelines, and best practices (e.g., local traffic codes, design manuals, international guidelines where applicable).</p> </li> <li> <p>Provide technical guidance and mentorship to engineers, planners, and analysts within the team.</p> </li> </ul> <p> </p> <p> <b>Project Management</b> </p> <ul> <li> <p>Plan, coordinate, and manage multiple traffic and mobility projects simultaneously, from initiation to completion.</p> </li> <li> <p>Develop project scopes, timelines, resource plans, and budgets in coordination with internal stakeholders and clients.</p> </li> <li> <p>Monitor progress, manage risks, and implement corrective actions to ensure delivery on time and within budget.</p> </li> <li> <p>Prepare and present project status reports, technical documentation, and decision-making material to management and clients.</p> </li> </ul> <p> </p> <p> <b>Design &amp; Analysis</b> </p> <ul> <li> <p>Lead or supervise the design of:</p> <ul> <li> <p>Intersection layouts, signalization plans, and traffic control strategies.</p> </li> <li> <p>Roadway and corridor improvements to enhance safety and efficiency.</p> </li> <li> <p>Parking strategies, access management, and circulation plans.</p> </li> <li> <p>Intelligent Transportation Systems (ITS) and traffic management solutions (where applicable).</p> </li> </ul> </li> <li> <p>Oversee traffic modelling using tools such as , , , or equivalent.</p> </li> <li> <p>Review output from models, interpret results, and translate findings into actionable recommendations.</p> </li> </ul> <p> </p> <p> <b>Mobility &amp; Policy Planning</b> </p> <ul> <li> <p>Contribute to sustainable mobility strategies, including public transport enhancement, walking and cycling initiatives, and demand management measures.</p> </li> <li> <p>Support policy development and advisory for traffic management, congestion mitigation, and safety improvement programs.</p> </li> <li> <p>Integrate land-use planning with transport strategies to optimize network performance and accessibility.</p> </li> </ul> <p> </p> <p> <b>Stakeholder &amp; Client Management</b> </p> <ul> <li> <p>Act as the primary technical point of contact for clients on traffic and mobility matters.</p> </li> <li> <p>Coordinate with government authorities, consultants, developers, and internal departments to secure approvals and alignment.</p> </li> <li> <p>Participate in stakeholder workshops, public consultations, and technical committees as required.</p> </li> <li> <p>Prepare high-quality technical reports, presentations, and documentation for clients and regulatory bodies.</p> </li> </ul> <p> </p> <p> <b>Quality, Compliance &amp; Continuous Improvement</b> </p> <ul> <li> <p>Ensure compliance with local regulations, standards, and health &amp; safety requirements in all project activities.</p> </li> <li> <p>Implement quality assurance and quality control processes for traffic studies, designs, and deliverables.</p> </li> <li> <p>Identify opportunities for innovation and continuous improvement in methodologies, tools, and workflows.</p> </li> <li> <p>Keep abreast of emerging trends in mobility, smart cities, ITS, and data-driven traffic management.</p> </li> </ul> <p> </p> <p> </p> <p> <b>What Required Skills You'll Bring:</b> </p> <ul> <li> <p>Bachelor s degree in , or related field.</p> </li> <li> <p>Master s degree in or is preferred.</p> </li> <li> <p>20+ year s experience within a technical field of Traffic/ Mobility Engineering</p> </li> <li> <p>Prior experience in managing multi-disciplinary project teams and interfacing with public authorities and private clients.</p> </li> <li> <p>Experience with large-scale infrastructure, urban development, or smart mobility projects is highly desirable.</p> </li> <li> <p>Professional registration or certification (e.g., Chartered Engineer, PE, RPEQ, or equivalent) is an advantage.</p> </li> </ul> <p> </p> <p> <b>What Desired Skills You'll Bring:</b> </p> <ul> <li> <p>Strong knowledge of traffic engineering principles, HCM methodologies, and geometric design standards.</p> </li> <li> <p>Proficiency in at least one major traffic modelling/simulation tool: , , , or equivalent.</p> </li> <li> <p>Familiarity with CAD and design tools (e.g., , ) and GIS solutions (e.g., , ).</p> </li> <li> <p>Ability to interpret and work with transport, land-use, and socio-economic datasets.</p> </li> <li> <p>Strong analytical and problem-solving capabilities, with attention to detail and accuracy.</p> </li> <li> <p>Leadership and team management.</p> </li> <li> <p><br></p></li></ul>

Nationality Requirement: Saudi Nationals Only<br>Job Purpose Responsible for supporting engineering and production activities by preparing accurate technical drawings, documentation, Bills of Materials, and material requirements for truck body manufacturing and project execution. The Design Draftsman will work closely with engineers and production teams to ensure drawings and technical documentation are accurate, complete, and suitable for manufacturing.<br>Key Responsibilities Prepare detailed technical drawings for truck bodies and related applications. Support Design Engineers with drafting, drawing revisions, and technical documentation. Read and understand engineering requirements, specifications, and production needs. Conduct technical inspections of chassis and vehicles when required. Prepare load distribution drawings and related calculations. Prepare Bills of Materials (BOM) for production. Assist in planning and identifying material requirements for assigned projects. Maintain and update engineering drawings and project documentation. Coordinate with Engineering, Production, Stores, and other departments regarding drawing and material requirements. Prepare technical and operational manuals when required. Ensure drawings and documentation are prepared accurately and according to approved engineering standards.

Responsibilities Develop, maintain, and support KNIME workflows. Perform ETL, data preparation, and data transformation activities. Integrate KNIME with enterprise data sources and services. Administer and troubleshoot KNIME environments. Support platform upgrades, testing, deployments, and performance optimization. Troubleshoot incidents and perform root-cause analysis. Coordinate with business users, technical teams, and vendors. Maintain technical documentation and support knowledge-transfer activities.<br>Requirements BSc. degree in Computer Science, Data Science, IT, or related field.3+ Yrs. of hands-on KNIME experience. Strong experience in KNIME workflow development and administration. Good knowledge of ETL, data preparation, data workflows, and data quality. Knowledge of programming and system/data integration. Experience with troubleshooting, testing, deployments, and platform upgrades. Good understanding of ITIL-based Incident, Change, and Release processes. Strong analytical, troubleshooting, and communication skills. English & Arabic required. Ability to work onsite in Riyadh or offshore, depending on project requirements.

Nationality Requirement: Saudi Nationals Only<br>Job Purpose Responsible for supervising and controlling daily production activities in truck body and trailer manufacturing, ensuring efficient workflow, product quality, productivity, and timely completion of production targets. The Production Foreman will lead production technicians, coordinate with engineers and supporting departments, and ensure products are manufactured according to approved drawings, specifications, and quality standards. Key Responsibilities Supervise daily production activities, including fabrication, assembly, welding, installation, and finishing processes. Allocate manpower and assign tasks according to production plans and priorities. Monitor production progress and ensure daily production targets are achieved. Read and understand production drawings, work instructions, and manufacturing requirements. Ensure products are manufactured according to approved drawings, specifications, and quality standards. Coordinate with Production Engineers, Welding Foreman, Quality Control, Stores, and other departments to resolve production issues. Monitor workmanship quality and help reduce defects, rework, and material wastage. Train, guide, and support production workers to improve skills, efficiency, and work quality.

Company Description Leajlik Salon is a modern, customer-focused salon offering a range of hair, beauty, and grooming services in a welcoming environment. The salon is committed to providing high-quality service and a comfortable, professional experience for every guest. Team members work collaboratively to maintain a clean, organized, and stylish space that reflects the salon’s standards. Leajlik Salon values reliability, professionalism, and a positive attitude in all staff members, creating an environment where both clients and employees feel respected and appreciated.<br>Role Description The Receptionist at Leajlik Salon is a full-time, on-site role based in Mecca. This role involves greeting and checking in clients, answering phone calls, scheduling and confirming appointments, and managing the front desk area. The Receptionist will handle client inquiries, support daily administrative and clerical tasks, and maintain accurate records in booking systems. Additional responsibilities include coordinating with stylists and technicians, processing payments, and helping ensure a smooth and welcoming experience for all guests.<br>Qualifications<br> Strong customer service skills, with the ability to welcome clients and respond to inquiries in a professional and friendly manner. Receptionist duties experience, including front desk management, appointment scheduling, and handling walk-in clients. Phone etiquette and communication skills, with the ability to manage calls, provide clear information, and handle multiple requests. Clerical skills, such as basic data entry, record keeping, organizing files, and managing booking or POS systems. Attention to detail, time management, and the ability to multitask in a fast-paced environment. Basic computer proficiency and comfort with salon or scheduling software (training can be provided). Professional appearance and demeanor, with a commitment to maintaining confidentiality and respecting all clients. Previous experience in a salon, spa, or hospitality setting is an advantage but not required; high school diploma or equivalent preferred.

Company Description CEPCO (Civil and Electrical Projects Contracting) is a leading construction company headquartered in Jeddah, Saudi Arabia, with offices across Saudi Arabia and the Middle East. Established in 1977, CEPCO delivers projects in civil and infrastructure, electrical, and electromechanical disciplines. The company specializes in high-voltage cable systems from 69 k V up to 380 k V, as well as the delivery, installation, and testing of 110 k V transformers and substation construction. CEPCO operates across Saudi Arabia and GCC countries and is a qualified turnkey general contractor with the Saudi Electricity Company in all major regions.<br>Role Description This is a full-time, on-site role based in Jeddah for a Site Electrical Engineer. The role involves supervising electrical works on construction sites, coordinating with project managers, contractors, and technicians to ensure safe and timely execution of electrical installations. The Site Electrical Engineer will oversee electrical testing and commissioning of equipment and systems, monitor electrical maintenance activities, and verify compliance with project specifications, standards, and safety regulations. Daily tasks include reviewing drawings, preparing site reports, supporting problem resolution, and ensuring effective communication between site teams and office-based project stakeholders.<br>Qualifications<br> <br>Strong foundation in Electrical Engineering, with practical knowledge of electricity and power distribution systems. Proficiency in Site Supervision for electrical works, including coordinating site activities and monitoring contractor performance. Experience in Electrical Testing and commissioning of high- and medium-voltage equipment and systems. Skills in Electrical Maintenance, including troubleshooting, preventive maintenance, and reliability improvement. Bachelor’s degree in Electrical Engineering or a closely related field. Familiarity with relevant IEC, NEC, or local electrical codes and safety standards. Ability to read and interpret electrical drawings and technical documentation. Effective communication, teamwork, and problem-solving abilities in a site environment. Previous experience with substation, transformer, or high-voltage cable projects is an advantage. Willingness to work on-site and adapt to project schedules and field conditions.

JOB PURPOSE:To support and execute project Electrical commissioning activities assigned. To implement ACWA Power Commissioning Standards and best practices on site for Electrical systems. To ensure Electrical commissioning, testing, and handover processes are carried out thoroughly and in compliance with project requirements. To collaborate with EPC, Project Company, and NOMAC teams to ensure safe, reliable, and efficient commissioning, and to demonstrate full operational readiness of assigned Electrical systems in accordance with OTS.<br>Assist in reviewing EPC Contractor’s Electrical commissioning procedures and test plans. Participate in pre-commissioning and commissioning activities of Electrical systems, including switchgear, transformers, protection systems, cables, UPS, battery chargers, and auxiliary systems. Execute functional testing, loop checks, and troubleshooting under the guidance of the Senior Electrical Commissioning Manager. Perform inspections and pre-commissioning checks to ensure compliance with design specifications and codes. Record test results and prepare commissioning reports for acceptance. Coordinate with design, construction, I&C, mechanical, and DCS teams to resolve technical issues. Liaise with vendors and manufacturers during testing and troubleshooting. Support documentation reviews (test reports, as-built drawings, commissioning records). Ensure compliance with project specifications, industry standards, and safety regulations. Implement safety measures during electrical energization, testing, and commissioning activities. Participate in safety audits and risk assessments. Work closely with Senior Electrical Commissioning Manager and commissioning team members. Share knowledge and collaborate with peers across commissioning disciplines. Support junior engineers and technicians in day-to-day commissioning tasks as delegated.<br>Minimum Qualifications Bachelor’s Degree Electrical Engineering or related discipline.<br>Minimum years of Experience5–7 years of experience in the Power and/or Water industry with a minimum of 5 years in Electrical commissioning roles on large projects. EPC-side commissioning or OEM testing experience is preferred. Minimum Skills Contribute to lessons learned by capturing challenges and solutions from ongoing projects. Support project teams in implementing corrective measures and enhancements in Electrical commissioning. Provide inputs to performance evaluations of EPC/vendor commissioning activities.

The Senior MEP (Mechanical, Electrical, Plumbing) Project Manager supports the organization in providing leadership and technical expertise in the key areas of Mechanical, Electrical and Plumbing engineering. This position is responsible for a portfolio of construction projects as are assigned and must ensure quality in keeping with international best practices construction standards.<br>Develop comprehensive project plans, including scope, budget, schedule, and resource allocation, to ensure successful project execution. Lead multidisciplinary teams of engineers, technicians, and subcontractors, providing direction, guidance, and support throughout the project lifecycle. Liaise with clients, architects, consultants, and regulatory authorities to ensure alignment of project objectives, specifications, and compliance requirements. Oversee quality control processes, conducting inspections, audits, and tests to verify that MEP systems meet design standards, codes, and client expectations. Monitor project budgets, track expenses, and implement cost-control measures to minimize deviations and ensure profitability. Identify, assess, and mitigate project risks, developing contingency plans and proactive strategies to prevent delays, disputes, and cost overruns. Manage project schedules, monitor progress against milestones, and implement strategies to optimize productivity and meet deadlines. Facilitate clear and effective communication among project stakeholders, providing regular updates, resolving issues, and addressing concerns in a timely manner. Manage changes to project scope, specifications, and requirements, assessing impacts and negotiating adjustments with clients and stakeholders. Ensure accurate and thorough documentation of project activities, including reports, drawings, specifications, and correspondence, to support accountability and compliance throughout the project lifecycle. Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies<br>Job Experience Minimum 18 years working experience, 5+ years in a relevant supervisory position, 10 years GCC experience is a plus<br>Education Bachelor's Degree in Mechanical Engineering plus Professional degree in PMP is advantage

Job purpose: The job Holder shall be Managing all “day to day” tasks to be performed by the Production (Line maintenance)/GSE, Workshops to ensure the best fleet availability and company/contractual objectives. The Job holder shall Implement and execute SAMI Airbus standards and procedures in the shop floor. Core Responsibility:Accountable for high fleet availability to meet and exceed company/customer requirements/KPIs. Accountable for roster management (+40) and ensure availability of manpower, resources and program deliverables on time. Ensure that all the technicians assigned to every maintenance task have the proper capabilities and resources to perform the job. Accountable for management/calibration of GSE/Tools and line maintenance workshops to support daily operations and meet contractual deliverables. Detect and report if necessary to the Technical Director the risks and opportunities that might impact contractually of the fleet/Program. Responsible for ensuring that the organisation’s procedures/QMS and international aviation standards are complied with when carrying out maintenance. Use and manage SQCDP/Lean Six Sigma panel/events to control/improve the Line/Base/Workshop issues and initiatives. Responsible for CARs prevention and closure within defined timeframe. Job Requirement: Bachelor Degree or equivalent in Aeronautical/Aerospace/Avionics Engineering B1/B2/C license holder issued by respective regulatory authority is strongly desirable Formal Training on Airbus Fleet - (A330 desired). At least five (5) years of experience working as MRO Manager Competencies & Skills:Negotiation level at English language (Technical & Aeronautical) is essential. Knowledge and proficiency in reading and interpretation of Aircraft and component manuals and Eng Work orders (TSM, MEL, IPC, AMM, SRM, AWM.). Good Computer skills with at least knowledge in MS office, airworthiness ERPs (M4A, AMOS, SAP, Trax..) and Lean Six sigma projects Highest standard in terms of quality, reliability and safety. Proven problem solving and decision-making skills.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Oversee and direct the daily operations of the post-processing production line, ensuring adherence to quality standards and production targets.</li><li>Manage a team of post-processing technicians, providing clear instructions, performance feedback, and fostering a collaborative work environment.</li><li>Implement and enforce strict quality control measures to identify and rectify defects, ensuring all products meet stringent specifications before shipment.</li><li>Monitor and optimize production workflows to maximize efficiency, minimize waste, and reduce cycle times within the post-processing department.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Possesses a High School Diploma or equivalent; a technical degree in a related field is a strong advantage.</li><li>Minimum of 5 years of progressive experience in a manufacturing or production environment, with at least 2 years in a supervisory or lead role.</li><li>Demonstrated experience in post-processing techniques relevant to the industry (e.g., finishing, assembly, packaging).</li><li>Proficiency in reading and interpreting technical drawings, work instructions, and quality control checklists.</li></ul><p></p></section>

Location: Riyadh, Saudi Arabia Company: Marina Inc.<br>About Marina Inc. Marina Inc. is one of Saudi Arabia's leading printing and fabrication companies, with over 20 years of experience delivering high-quality printing, fabrication, signage, packaging, exhibition stands, and branding solutions. We are looking for an experienced Paint & Finishing Supervisor to join our growing fabrication division.<br>Key Responsibilities Supervise all painting and finishing activities within the fabrication department. Plan and schedule daily paint shop operations to meet production deadlines. Ensure high-quality surface preparation, priming, painting, and finishing of steel, wood, and acrylic products. Monitor paint quality, color consistency, and overall finish standards. Manage the paint team and allocate work efficiently. Coordinate closely with the Fabrication Manager and Project Managers to ensure on-time project completion. Maintain inventory of paints, consumables, and finishing materials. Ensure compliance with health, safety, and environmental regulations. Identify opportunities to improve productivity, reduce waste, and enhance finishing quality. Inspect completed work before handover to installation or delivery teams.<br>Qualifications5+ years of experience supervising industrial painting or finishing operations. Experience with steel fabrication, exhibition stands, signage, or custom fabrication is highly preferred. Strong knowledge of surface preparation, primers, automotive and industrial paint systems, powder coating, and finishing techniques. Ability to read production drawings and coordinate with fabrication teams. Strong leadership and communication skills. Experience managing technicians and production schedules. Familiarity with quality control procedures and safety standards.<br>Preferred Experience Experience in fabrication workshops. Experience with spray painting, airless systems, and finishing equipment. Knowledge of different finishing methods for steel, wood, and acrylic products.<br>What We Offer Opportunity to work on high-profile projects across Saudi Arabia. Dynamic and collaborative work environment. Career growth within a rapidly expanding fabrication division. Competitive salary based on experience.<br>If you're passionate about delivering exceptional finishes and leading a high-performing production team, we'd love to hear from you.<br>Apply through Linked In or send your CV to vacancy@marina.com.sa

JOB PURPOSE:To support and execute project Electrical commissioning activities assigned. To implement ACWA Power Commissioning Standards and best practices on site for Electrical systems. To ensure Electrical commissioning, testing, and handover processes are carried out thoroughly and in compliance with project requirements. To collaborate with EPC, Project Company, and NOMAC teams to ensure safe, reliable, and efficient commissioning, and to demonstrate full operational readiness of assigned Electrical systems in accordance with OTS.<br>Assist in reviewing EPC Contractor’s Electrical commissioning procedures and test plans. Participate in pre-commissioning and commissioning activities of Electrical systems, including switchgear, transformers, protection systems, cables, UPS, battery chargers, and auxiliary systems. Execute functional testing, loop checks, and troubleshooting under the guidance of the Senior Electrical Commissioning Manager. Perform inspections and pre-commissioning checks to ensure compliance with design specifications and codes. Record test results and prepare commissioning reports for acceptance. Coordinate with design, construction, I&C, mechanical, and DCS teams to resolve technical issues. Liaise with vendors and manufacturers during testing and troubleshooting. Support documentation reviews (test reports, as-built drawings, commissioning records). Ensure compliance with project specifications, industry standards, and safety regulations. Implement safety measures during electrical energization, testing, and commissioning activities. Participate in safety audits and risk assessments. Work closely with Senior Electrical Commissioning Manager and commissioning team members. Share knowledge and collaborate with peers across commissioning disciplines. Support junior engineers and technicians in day-to-day commissioning tasks as delegated.<br>Minimum Qualifications Bachelor’s Degree Electrical Engineering or related discipline.<br>Minimum years of Experience5–7 years of experience in the Power and/or Water industry with a minimum of 5 years in Electrical commissioning roles on large projects. EPC-side commissioning or OEM testing experience is preferred. Minimum Skills Contribute to lessons learned by capturing challenges and solutions from ongoing projects. Support project teams in implementing corrective measures and enhancements in Electrical commissioning. Provide inputs to performance evaluations of EPC/vendor commissioning activities.

:About the Role<br>We are looking for a talented and creative Graphic Designer with a strong visual sense and a passion for creating impactful and engaging designs. The ideal candidate will be capable of producing professional visual content while utilizing the latest technologies to enhance creativity and efficiency<br>:Responsibilities<br>• Design creative marketing materials for digital and print platforms.• Create engaging visual content for social media, advertising campaigns, and branding projects.• Develop and maintain consistent brand identity across all visual communications.• Collaborate with marketing and content teams to transform ideas into compelling designs.• Utilize AI-powered design tools to enhance creativity and improve workflow efficiency.• Stay up to date with the latest design trends and industry best practices.<br>:Requirements & Qualifications<br>• Minimum 2 years of professional experience in Graphic Design.• Proficiency in Adobe Creative Suite (Photoshop, Illustrator, InDesign).• Experience with AI design tools such as Adobe Firefly, Midjourney, Chat GPT, or similar platforms.• Strong understanding of typography, color theory, layout, and visual hierarchy.<br>نبذة عن الوظيفه : <br>نبحث عن مصمم جرافيك مبدع وموهوب يتمتع بحس بصري قوي وشغف بابتكار تصاميم مؤثرة وجذابة. سيكون المرشح المثالي قادرًا على إنتاج محتوى بصري احترافي مع الاستفادة من أحدث التقنيات لتعزيز الإبداع والكفاءة.<br>المسؤوليات :<br>• تصميم المواد التسويقية والإعلانية للمنصات الرقمية والمطبوعة.• إعداد محتوى بصري جذاب لمنصات التواصل الاجتماعي والحملات التسويقية ومشاريع الهوية البصرية.• تطوير الهوية البصرية للشركة وضمان تطبيقها بشكل متناسق في جميع التصاميم.• التعاون مع فرق التسويق والمحتوى لتحويل الأفكار إلى تصاميم احترافية ومؤثرة.• استخدام أدوات التصميم المدعومة بالذكاء الاصطناعي لتعزيز الإبداع وتحسين كفاءة العمل.• متابعة أحدث اتجاهات وتقنيات التصميم وتطبيق أفضل الممارسات في المجال.<br>المتطلبات والمؤهلات :<br>• خبرة عملية لا تقل عن سنتين في مجال التصميم الجرافيكي.• إجادة برامج Adobe Creative Suite (Photoshop, Illustrator, InDesign).• خبرة في استخدام أدوات الذكاء الاصطناعي للتصميم مثل Adobe Firefly وMidjourney وChat GPT أو ما يماثلها.• فهم قوي للطباعة والألوان وتنسيق العناصر البصرية وأساليب الإخراج الفني.• مهارات تواصل ممتازة والقدرة على العمل ضمن فريق.

We are looking for a Techno-Commercial Estimator to prepare complete and competitive techno-commercial offers for hard and soft facility management services across government and private sector projects in Saudi Arabia. The role requires a strong balance of technical understanding and commercial acumen to develop compliant, technically sound, and commercially viable proposals through platforms such as Etimad.<br>Key Responsibilities Technical Scope Review tender documents, scope of work, specifications, and drawings to fully understand technical and operational requirements. Conduct site visits when required. Develop technical proposals, method statements, compliance matrices, and resource deployment plans aligned with client requirements and international FM standards. Ensure all technical submissions are compliant with applicable standards (e.g., BICSc, ISO 41001, Saudi Building Code, and client-specific requirements). Coordinate with operations and technical teams to validate proposed methodologies, staffing plans, and equipment requirements.<br>Commercial Scope Prepare accurate Bills of Quantities (BoQ), detailed cost estimates, and resource-based pricing for hard and soft FM services. Analyse current market pricing trends, labour rates, and productivity norms to develop competitive yet profitable offers. Support bid strategy development, risk assessment, and margin analysis. Work on government tenders through the Etimad portal and other procurement platforms, ensuring full compliance with submission requirements.<br>General Prepare complete techno-commercial offers. Maintain proper documentation, assumptions, and estimation records for all bids. Collaborate with the commercial, operations, and business development teams throughout the tendering process. Meet strict deadlines while maintaining high quality and accuracy in all submissions.<br>Requirements Proven experience in preparing techno-commercial offers for Facility Management contracts in the Saudi Arabian market (government and private sectors). Strong knowledge of both technical and commercial aspects of FM tendering, including scope interpretation, method statements, resource planning, and pricing. Hands-on experience with the Etimad portal and other government procurement platforms. Good understanding of hard and soft FM services, operational requirements, and current market pricing trends in the Kingdom. Familiarity with local and international FM standards, including:BICSc, ISSA, and BESAISO 41001 – Facility Management Systems Saudi Building Code (SBC) IFMA and relevant industry guidelines Strong Excel and analytical skills with attention to detail. Excellent written and verbal communication skills in English and Arabic. Ability to work under pressure and meet tight tender deadlines. Immediate availability is mandatory. Must be based in or willing to work from Riyadh.<br>Application Requirements Interested candidates must submit the following documents:Updated CVA separate Saudi Arabia Facility Management Experience Summary clearly highlighting:Key FM projects executed in Saudi Arabia Bid-win rate Experience in preparing techno-commercial offers Knowledge of the Etimad portal and other government procurement platforms

<h3 >About the Role</h3> <p >KAUST (King Abdullah University of Science and Technology) is seeking an Engineering Manager for a full-time position based in Jeddah, Makkah, Saudi Arabia. This role is central to providing comprehensive engineering services, including technical support, conducting studies, and developing effective engineering solutions. The Engineering Manager will oversee activities related to project engineering and development service programs, while also implementing robust engineering project management for major capital projects and facility upgrades.</p> <h3 >Core Engineering Responsibilities</h3> <ul > <li >Manage the engineering process from conceptual scope development to accurate cost estimates and documented energy savings calculations.</li> <li >Conduct design reviews and provide technical comments across all relevant disciplines for both upcoming and ongoing projects.</li> <li >Offer technical support to business development, estimating, and onsite engineering teams.</li> <li >Develop planning and prioritization processes to ensure optimal alignment of multi-disciplinary resources for project delivery.</li> <li >Report regularly on engineering activities to the Senior Management team, ensuring timely and accurate reporting of Key Performance Indicators.</li> </ul> <h3 >Project Management and Oversight</h3> <ul > <li >Manage the development and implementation of measurement and verification plans for assigned projects, collaborating with KAUST Stakeholders to track obligations.</li> <li >Coordinate and manage third-party design consultants for all outsourced engineering and design-related work.</li> <li >Identify and provide optimized solutions to achieve the lowest possible cost for KAUST.</li> <li >Process, track, and maintain accurate records of project-related documentation in coordination with internal and outsourced teams.</li> <li >Coordinate with design consultants, project teams, and KAUST stakeholders to define deliverables for engineering works.</li> </ul> <h3 >Standards and Process Enhancement</h3> <ul > <li >Establish quality and reliability standards by studying industry benchmarks, customer requirements, and research/design and development needs.</li> <li >Define metrics required to assess performance against established standards.</li> <li >Develop and enhance KAUST Engineering standards to deliver safe, value-driven, and sustainable projects.</li> <li >Apply problem-solving skills to resolve technical issues and initiate solution techniques.</li> <li >Participate in the continuous improvement of PDE&amp;C’s procedures and adhere to KAUST’s established procedures.</li> </ul> <h3 >Team Leadership and Stakeholder Engagement</h3> <ul > <li >Manage, direct, and coordinate the activities of the engineering team to ensure projects progress on schedule.</li> <li >Remove technical barriers and obstacles to facilitate continuous improvement activities within the team.</li> <li >Conduct regular performance reviews, manage attendance, holidays, and disciplinary issues as appropriate.</li> <li >Develop and manage cost estimations for required projects.</li> <li >Build trusting relationships with stakeholders and peers through transparency, ownership, and a customer-centric approach.</li> </ul> <h3 >Required Experience and Work Type</h3> <p >Candidates for this full-time Engineering Manager position are expected to have <strong >2-5 years of relevant experience</strong>. The role involves working within a dynamic environment at KAUST, contributing to critical infrastructure and development projects in Jeddah, Makkah, Saudi Arabia.</p>

<h3 >About the Role</h3> <p >Nahdi Medical Co. is seeking an <strong >Automation Senior Engineer</strong> to join our team in Jeddah and Makkah. This full-time role is crucial for providing technical support and ensuring the optimal performance of automated material handling equipment within our warehouses and distribution centers. The position requires 5-10 years of experience and involves complex troubleshooting and problem-solving to maintain operational continuity.</p> <h3 >Key Responsibilities</h3> <ul > <li >Modify and troubleshoot system interfaces between Programmable Logic Controls (PLC) and Material Flow Systems (MFS) to ensure continuous production flow.</li> <li >Resolve operational challenges by repairing damaged components such as sensors, scanners, visualization systems, motors, frequency inverters, and encoders.</li> <li >Identify the root cause of faults and production errors, then implement permanent solutions to assure operation continuity.</li> <li >Analyze daily system operation reports to track performance and identify opportunities for continuous improvement.</li> <li >Design and conduct maneuver testing scenarios to identify and address system issues.</li> <li >Design and deliver training programs for all users to enhance system knowledge, resolve issues, and prevent recurrence.</li> <li >Update the help-desk ticketing system to track, monitor, and resolve issues efficiently.</li> <li >Manage the performance of external suppliers and subcontractors to maximize business benefits.</li> <li >Monitor automated system machine performance and generate daily reports for management visibility.</li> <li >Represent Nahdi in an international team focused on automation practices to ensure maximum system uptime and performance.</li> <li >Collaborate with other Material Handling Equipment (MHE) engineers to achieve 360 synergy and full operational capacity.</li> <li >Design system manuals for use in employee induction and on-the-job training.</li> </ul> <h3 >Technical Expertise</h3> <p >The successful candidate will possess a strong foundation in electrical and electronic principles. This includes in-depth knowledge of motors, drivers, controllers, Human-Machine Interfaces (HMIs), and various communication protocols. The role demands proficiency in utilizing diverse technical tools for effective troubleshooting and problem-solving.</p> <h3 >Collaboration and System Uptime</h3> <p >This position requires active collaboration with external software developers and internal onsite teams to ensure maximum system uptime. The Automation Senior Engineer will play a critical role in identifying and implementing improvements, contributing to the overall efficiency and reliability of automated systems.</p> <h3 >Candidate Requirements</h3> <ul > <li >A minimum of 5 to 10 years of experience in a relevant engineering field.</li> <li >Demonstrated ability to perform complex troubleshooting and problem-solving.</li> <li >Commitment to being present whenever the system requires support, including during holidays or days off.</li> </ul> <h3 >Work Environment</h3> <p >The work environment for this role is primarily indoors (80%), with approximately 20% of time spent outdoors. The work schedule consists of 6 working days per week with 1 day off. Daily working hours are 8 hours, including a 1-hour break, and operate on rotating shifts.</p>

OVERVIEWAt Rosewood Red Sea an ultra-luxury hospitality environment, the Engineering Manager represents the frontline of technical excellence, ensuring that every guest-facing and back-of-house system performs flawlessly at all times. This role transcends routine maintenance, requiring agility, precision, and a service-driven mindset to uphold Rosewood’s A Sense of Place philosophy comfort, safety, and sophistication. Operating at the intersection of engineering and guest experience, the Engineering Manager brings responsiveness, technical mastery, and initiative—often acting independently, resolving complex issues in real time, and contributing ideas that enhance operational performance. Through hands-on expertise and proactive engagement, the role reinforces a seamless, elevated environment that distinguishes luxury hospitality from conventional operations. JOB RESPONSIBILITIES1. Operational Excellence & System Management Ensure continuous operation of all hotel systems including: HVAC, electrical, plumbing, fire & life safety, and ELV systems Monitor plant equipment (chillers, boilers, pumps, generators) to ensure optimal efficiency and reliability Perform routine inspections, technical rounds, and log all operational parameters Maintain readiness of standby systems and emergency equipment Ensure uninterrupted utilities like power, ventilation, and water across the hotel 2. Guest Response & Service Integration Respond immediately to guest maintenance requests with professionalism and minimal disruption Diagnose and resolve in-room and public area issues efficiently Engage with guests when required, ensuring resolution aligns with luxury service expectations 3. Preventive & Corrective Maintenance Execute preventive maintenance programs across all equipment and systems Troubleshoot and repair: Electrical systems HVAC and refrigeration Plumbing and mechanical systems Carry out minor civil works (painting, carpentry, finishing) Multi-skilled in maintenance across MEP systems and general building works 4. Emergency Response & On-Call Duties Act as first responder for all technical emergencies, including: Power failure Fire system activation Water leakage / flooding Participate actively in the Emergency Response Team (ERT) Remain available beyond shifts for urgent breakdowns when required Execute safe isolation procedures (Lockout/Tagout) 5. Health, Hygiene & HACCP Compliance Ensure all engineering systems in kitchens, food preparation, and storage areas comply with HACCP standards Maintain hygiene-focused systems such as: Kitchen ventilation & exhaust (grease control, airflow balance) Drainage and waste water systems Cold room temperature stability Support Food Safety teams during audits and inspections Ensure no engineering-related risk to food safety or hygiene standards 6. Shift Ownership & Reporting Take full responsibility of engineering operations during assigned shift Maintain accurate: Logbooks Incident reports Shift handover documentation Communicate critical issues clearly to the next shift and supervisors Daily activity reporting and cross-shift communication are essential 7. Technical Expertise & Multi-Skilling Demonstrate strong working knowledge across: Electrical systems HVAC & refrigeration Plumbing BMS (Building Management Systems) Read and interpret technical drawings, schematics, and manuals Operate and calibrate gauges, meters, and control systems Advanced troubleshooting and multi-disciplinary skills are expected 8. Inventory & Resource Control Monitor spare parts and consumables Initiate requisitions to maintain operational readiness Ensure proper handling and storage of tools and materials 9. Safety, Compliance & Standards Adhere strictly to: Safety procedures Fire and life safety standards Local authority regulations Identify and report hazards, risks, and non-compliance issues Ensure proper use of PPE and safe work practices 10. Team Collaboration & Informal Leadership Coordinate with other departments to minimize operational disruption Support and guide junior technicians when required Contribute to a culture of accountability, responsiveness, and precision 11. Continuous Improvement & Innovation Identify opportunities to improve: System efficiency Energy consumption Maintenance practices Participate in demonstrations, technical briefings, and cross-department initiatives Suggest and implement practical improvements that enhance guest comfort and operational reliability QUALIFICATIONS & EXPERIENCEEducation Diploma or Degree in: Mechanical / Electrical / Building Services Engineering<br> (Technical certification or vocational training accepted in luxury hospitality environments) Experience Minimum 3–6 years in engineering or maintenance operations Prior experience in 5-star hotel or luxury property preferred Exposure to: Plant room operations Guestroom maintenance BMS systems Technical Skills Strong troubleshooting capability across MEP systems Knowledge of: Preventive maintenance systems Energy management practices Building automation systems (BMS) Ability to read and interpret technical drawings and manuals Communication & Language Strong verbal and written communication skills Ability to: Interact professionally with guests Prepare reports and logs accurately Fluency in English (mandatory) Arabic or additional languages preferred in Middle East operations Behavioral Competencies High level of responsiveness and accountability Ability to work independently under pressure Strong problem-solving and decision-making skills Detail-oriented with a proactive mindset Training & Development Capability Ability to share technical knowledge with peers Participate in training sessions and safety drills Support onboarding of new technicians Health, Safety & Compliance Knowledge Understanding of: HACCP requirements (engineering-related aspects) Fire and life safety systems Safe work practices and risk assessments Other Requirements Flexibility to work shifts, weekends, and holidays Physically capable of handling engineering tasks Willingness to be on-call and respond to emergencies at any time