Ship Mechanic Jobs

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of </span><b><span>Mechanical Maintenance Technician in Saudi Arabia</span></b><span>. Our client, </span><span> is seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited.</span><br></p><br><span>Key Responsibilities</span><br><ul><li><span>Perform routine preventive and corrective maintenance on mechanical equipment and machinery.</span><br></li><li><span>Inspect mechanical systems to identify wear, damage, abnormal vibration, leakage, and potential failures.</span><br></li><li><span>Diagnose mechanical faults and perform necessary repairs or component replacements.</span><br></li><li><span>Carry out dismantling, installation, alignment, and reassembly of mechanical components as required.</span><br></li><li><span>Maintain equipment according to prescribed maintenance procedures and safety requirements.</span><br></li><li><span>Use appropriate mechanical tools and measuring instruments during maintenance activities.</span><br></li><li><span>Maintain accurate records of inspections, repairs, breakdowns, and preventive maintenance activities.</span><br></li><li><span>Coordinate with supervisors and other maintenance personnel to minimize equipment downtime.</span><br></li></ul><span>Required Skills</span><br><ol><li><b><span>Mechanical Maintenance</span></b><span> — Ability to perform routine maintenance and repair of mechanical machinery and equipment.</span><br></li><li><b><span>Troubleshooting</span></b><span> — Ability to identify mechanical faults and determine appropriate corrective actions.</span><br></li><li><b><span>Preventive Maintenance</span></b><span> — Understanding of scheduled inspection and maintenance practices.</span><br></li><li><b><span>Mechanical Tools</span></b><span> — Practical ability to use maintenance tools and measuring instruments safely.</span><br></li><li><b><span>Equipment Inspection</span></b><span> — Ability to identify wear, leakage, misalignment, vibration, and other mechanical abnormalities.</span><br></li></ol><span>Preferred Skills</span><br><ul><li><span>Knowledge of equipment alignment and mechanical fitting.</span><br></li><li><span>Familiarity with industrial maintenance and safety procedures.</span><br></li><li><span>Ability to read basic mechanical drawings and equipment manuals.</span><br></li></ul><span>Work Experience Requirements</span><br><p><span>The posting does not specify an experience requirement. </span><b><span>Typical requirement:</span></b><span> approximately 2–5 years of hands-on mechanical maintenance experience in an industrial, manufacturing, plant, or similar equipment-maintenance environment.</span><br></p><br><span>Education</span><br><ul><li><b><span>Minimum:</span></b><span> Typical — ITI/Diploma in Mechanical Engineering or a related technical trade</span><br></li><li><b><span>Preferred:</span></b><span> Typical — Diploma in Mechanical Engineering</span><br></li><li><b><span>Additional:</span></b><span> Relevant mechanical maintenance or industrial safety certifications are beneficial.</span><br></li></ul>Contact Number - 9786888866 <br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>We are seeking an experienced Mechanical Technician to support mechanical maintenance activities within a petrochemical environment . Position Overview The Mechanical Technician will be responsible for supporting Mechanical Engineers and carrying out technical maintenance activities on rotating and static equipment , ensuring equipment and mechanical operations are maintained to the required quality standards. Key Responsibilities Assist Mechanical Engineers in the design and maintenance of machinery, products, and equipment . Inspect mechanical equipment and operating systems and carry out necessary corrections and adjustments . Support maintenance activities for rotating and static equipment . Ensure mechanical operations, standards, and controls are maintained at a high level of quality . Provide technical support and guidance to lower-level technicians . Identify and report mechanical equipment issues and support corrective maintenance activities. Work closely with Mechanical Engineers and maintenance teams to ensure reliable equipment operation.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum Diploma in Mechanical Engineering / Mechanical discipline . Minimum 5 years of relevant experience . Strong hands-on experience maintaining rotating and static equipment . Experience in the petrochemical industry is required . Good technical knowledge of mechanical maintenance and equipment. Ability to provide technical support to junior/lower-level technicians. Strong troubleshooting, teamwork, and communication skills.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Mechanical Maintenance Technician in Paint Shop is responsible for the preventive, corrective, and predictive maintenance of all mechanical equipment within the automotive paint shop. The role ensures safe, reliable, and efficient operation of paint shop machinery, including conveyors, pumps, spray booths, ovens, robots, and associated utility systems. The technician supports production targets by minimizing downtime, maintaining equipment condition, and ensuring compliance with safety and quality standards.</p><p><strong>Responsibilities:</strong></p><p><strong>Mechanical Equipment Maintenance:</strong></p><ul><li>Perform scheduled preventive maintenance on paint shop mechanical systems such as conveyors, roller beds pumps, spray booths, Air handling units, ovens, robotic peripherals, turntables, and skids.</li><li>Diagnose and repair mechanical faults, breakdowns, and abnormal equipment behavior.</li><li>Conduct predictive maintenance activities using vibration analysis, thermography, and condition monitoring techniques.</li><li>Replace or repair worn components including bearings, seals, belts, chains, gearboxes, and mechanical assemblies.</li></ul><p><strong>Installation &amp; Commissioning Support:</strong></p><ul><li>Assist with installation, alignment, setup, and commissioning of new mechanical equipment.</li><li>Support equipment upgrades, retrofits, and approved modifications.</li><li>Verify proper mechanical operation before handover to production.</li></ul><p><strong>Troubleshooting &amp; Breakdown Response:</strong></p><ul><li>Respond promptly to mechanical breakdowns to restore equipment safely and efficiently.</li><li>Use technical manuals, drawings, and schematics to identify root causes of failures.</li><li>Work closely with electrical and automation technicians for integrated system troubleshooting.</li></ul><p><strong>Process &amp; Quality Support:</strong></p><ul><li>Ensure mechanical systems operate within defined process limits to support paint quality.</li><li>Support process tests such as flow rate, sealing effectiveness, adhesion, and equipment repeatability as required.</li><li>Identify and report mechanical conditions that could impact paint quality or safety.</li></ul><p><strong>Safety &amp; Compliance:</strong></p><ul><li>Strictly follow PPE usage, lockout/tagout (LOTO), confined space, and hazardous area procedures.</li><li>Ensure all maintenance work complies with company policies, OEM standards, and applicable regulations.</li><li>Proactively identify and report safety hazards, near misses, and unsafe conditions.</li></ul><p><strong>Documentation &amp; Coordination:</strong></p><ul><li>Complete maintenance work orders, logs, and equipment history accurately.</li><li>Track mechanical spare part usage and report inventory requirements.</li><li>Communicate equipment status, risks, and completed work with supervisors and cross functional teams.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School Diploma or equivalent in mechanical &amp; mechatronics engineering.</li><li>Technical or vocational training in Mechanical Maintenance is preferred.</li><li>2-4 years of mechanical maintenance experience in automotive manufacturing or paint shop environments.</li><li>Experience with automated paint shop equipment and robotic systems is preferred.</li><li>Automotive manufacturing paint shop and maintenance areas.</li><li>Regular exposure to conveyors, ovens, and mechanical equipment.</li><li>Use of PPE is mandatory during all maintenance activities.</li><li>Shift work and on-call support as required by production schedules.</li><li><strong>Skills:</strong></li><li>Strong mechanical troubleshooting and repair capability.</li><li>Knowledge of hydraulic, pneumatic, and mechanical systems.</li><li>Ability to read and interpret mechanical drawings, piping diagrams manuals, and work instructions.</li><li>Familiarity with paint shop equipment and continuous conveyor systems.</li><li>High attention to detail and strong safety mindset.</li><li>Effective problem-solving skills for mechanical faults.</li><li>Ability to work independently and as part of a maintenance team.</li><li>Clear communication with production, engineering, and maintenance teams.</li><li>Mechanical maintenance certification from recognized institutions or equipment manufacturers. (Preferred).</li><li>OSHA Safety Training or equivalent EHS-related certification. (Preferred).</li></ul><p></p></section>

<p><strong>Job Purpose</strong></p><p><br></p><p>To perform preventive and corrective maintenance, inspection, troubleshooting, and repair of mechanical systems and equipment across Al Khozama Investment properties, ensuring safe, reliable, and efficient operation in accordance with company standards, manufacturer recommendations, and applicable regulations.</p><p><br></p><p><strong>Key Responsibilities</strong></p><p><br></p><ul><li>Perform preventive and corrective maintenance on mechanical equipment and systems.</li><li>Inspect, troubleshoot, repair, and maintain pumps, motors, valves, compressors, plumbing-related mechanical equipment, and other building services systems.</li><li>Monitor the condition and performance of mechanical equipment and identify potential faults before breakdowns occur.</li><li>Respond promptly to maintenance requests and breakdowns and restore equipment to normal operating condition.</li><li>Carry out scheduled preventive maintenance activities according to approved maintenance plans.</li><li>Conduct regular inspections of mechanical rooms, equipment, and associated installations.</li><li>Assist in the maintenance and operation of HVAC and other building mechanical systems as required.</li><li>Perform basic mechanical installation, dismantling, alignment, lubrication, and adjustment works.</li><li>Ensure all maintenance activities are carried out safely and in accordance with approved procedures.</li><li>Record completed maintenance activities, equipment conditions, spare parts used, and outstanding issues.</li><li>Coordinate with other engineering disciplines when maintenance activities require joint support.</li><li>Maintain tools, equipment, and work areas in clean and safe condition.</li><li>Report major defects, equipment failures, safety hazards, and required spare parts to the supervisor.</li><li>Support contractors and specialist service providers during maintenance and repair activities.</li><li>Follow company policies, safety procedures, and applicable statutory requirements.</li><li>Provide support during emergencies and breakdown situations when required.</li><li>Perform any other duties related to the role as assigned by management.</li></ul><p><br></p><p><strong>Key Performance Indicators (KPIs)</strong></p><p><br></p><ul><li>Preventive maintenance completion rate.</li><li>Mechanical equipment availability and reliability.</li><li>Response and resolution time for maintenance requests.</li><li>Reduction in recurring mechanical breakdowns.</li><li>Compliance with maintenance schedules and procedures.</li><li>Quality of completed maintenance work.</li><li>Compliance with health, safety, and environmental requirements.</li><li>Accuracy and timeliness of maintenance records.</li><li>Effective utilization of spare parts, tools, and maintenance resources.</li></ul><p><br></p><p><strong>Technical Competencies</strong></p><p><br></p><ul><li>Mechanical equipment maintenance and troubleshooting.</li><li>Preventive and corrective maintenance.</li><li>Pumps, motors, valves, compressors, and mechanical systems.</li><li>Basic HVAC and building services knowledge.</li><li>Mechanical installation, alignment, and adjustment.</li><li>Reading mechanical drawings and equipment manuals.</li><li>Use of mechanical tools and diagnostic equipment.</li><li>Basic understanding of building management and maintenance systems.</li><li>Knowledge of occupational health and safety requirements.</li><li>Ability to identify mechanical faults and implement appropriate corrective actions.</li></ul><p><br></p><p><strong>Qualifications &amp; Experience</strong></p><p><br></p><ul><li>Diploma or Technical Certificate in Mechanical Engineering, Mechanical Maintenance, or a related field.</li><li>Minimum <strong>2–4 years of relevant experience</strong> in mechanical maintenance.</li><li>Experience in hospitality, hotels, commercial buildings, facilities management, or property management is preferred.</li><li>Knowledge of preventive maintenance practices and mechanical equipment.</li><li>Ability to work shifts, weekends, and public holidays when required.</li><li>Good communication and teamwork skills.</li></ul><p><br></p>

<p>Senior Mechanical Engineer will be responsible for reviewing, managing, and supervising all mechanical engineering works for a PMC infrastructure project involving roads, bridges, and tunnels. The role ensures that all mechanical systems are designed, installed, tested, commissioned, and handed over in accordance with project specifications, international standards, and client and authority requirements.</p><h3>Responsibilities</h3><ul><li>Review and approve mechanical designs, drawings, calculations, specifications, and method statements submitted by contractors.</li><li>Ensure mechanical systems are fully coordinated with civil, structural, electrical, ITS, and tunnel safety systems.</li><li>Verify compliance with project specifications, international standards (ASHRAE, NFPA, IEC, EN), and local authority regulations.</li><li>Oversee mechanical systems associated with road infrastructure including pump stations, drainage pumping systems, utility chambers, and maintenance facilities.</li><li>Review mechanical installations for road-side buildings and ancillary structures.</li><li>Review mechanical components for bridges including movable bridge systems (if applicable), drainage systems, expansion joint interfaces, and inspection/maintenance equipment.</li><li>Ensure mechanical installations are durable and protected against environmental exposure.</li><li>Review and approve tunnel mechanical systems including ventilation systems (longitudinal, transverse), jet fans, dampers, fire &amp; life safety systems, smoke control systems, and emergency response equipment.</li><li>Coordinate mechanical systems with electrical power, SCADA, fire detection, and ITS systems.</li><li>Ensure compliance with international tunnel safety and life-safety standards.</li><li>Supervise factory acceptance tests (FAT), site acceptance tests (SAT), commissioning, and system integration testing.</li><li>Review test results and ensure rectification of mechanical defects or non-conformities.</li><li>Support smooth handover to operations and maintenance teams.</li><li>Liaise with contractors, suppliers, authorities, and the client.</li><li>Resolve mechanical engineering issues and interface challenges.</li><li>Attend technical meetings, inspections, and progress reviews.</li><li>Monitor construction quality and ensure compliance with approved drawings and specifications.</li><li>Review non-conformance reports (NCRs) and verify implementation of corrective actions.</li><li>Ensure compliance with health, safety, and environmental requirements.</li><li>Maintain records of mechanical approvals, inspections, testing, and commissioning activities.</li><li>Prepare periodic reports on mechanical progress, risks, and performance.</li><li>Support audits, authority approvals, and client reviews.</li></ul><p><strong>Desired Candidate Profile</strong></p><h3>Required</h3><ul><li>Bachelor s degree in mechanical engineering or related discipline.</li><li>Master s Degree is preferred.</li><li>Minimum 15 years of experience in mechanical engineering for major infrastructure projects.</li><li>Proven PMC or consultancy experience on roads, bridges, and tunnel projects.</li><li>Strong knowledge of tunnel ventilation, fire &amp; life safety systems, and mechanical interfaces.</li><li>Familiarity with international standards and local authority requirements.</li><li>Excellent coordination, communication, and technical reporting skills.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>We are seeking an experienced Mechanical Technician to support mechanical maintenance activities within a petrochemical environment .<br> Position Overview The Mechanical Technician will be responsible for supporting Mechanical Engineers and carrying out technical maintenance activities on rotating and static equipment , ensuring equipment and mechanical operations are maintained to the required quality standards.<br> Key Responsibilities Assist Mechanical Engineers in the design and maintenance of machinery, products, and equipment .<br> Inspect mechanical equipment and operating systems and carry out necessary corrections and adjustments .<br> Support maintenance activities for rotating and static equipment .<br> Ensure mechanical operations, standards, and controls are maintained at a high level of quality .<br> Provide technical support and guidance to lower-level technicians .<br> Identify and report mechanical equipment issues and support corrective maintenance activities.<br> Work closely with Mechanical Engineers and maintenance teams to ensure reliable equipment operation.<br> Minimum Diploma in Mechanical Engineering / Mechanical discipline .<br> Minimum 5 years of relevant experience .<br> Strong hands-on experience maintaining rotating and static equipment .<br> Experience in the petrochemical industry is required .<br> Good technical knowledge of mechanical maintenance and equipment.<br> Ability to provide technical support to junior/lower-level technicians.<br> Strong troubleshooting, teamwork, and communication skills.<br></span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>Optimizes inventory control procedures</p><p>Examine the levels of materials and supplies to determine shortages</p><p>Documents daily shipments and deliveries to replenish inventory</p><p>Creates detailed reports for adjustments, inventory operations and stock levels (counting,cycle counting,audit counting) physical and systems counts are the same</p><p>Transacts the transfers and receipts</p><p>Evaluates new inventory and ensures it s ready to ship</p><p>Orders new supplies avoiding excessive surplus or inefficiencies (not for US)</p><p>Analyzes various suppliers to ensure the company is receiving the best cost-effective deals</p><p>Holds experience and knowledge in standard concepts, practices and procedures within two or more of the relevant fields</p><p>Relies on instructions, pre-established guidelines or on limited experience and judgement to plan and accomplish the functions and goals of the job</p><p>Monitors inventory level to ensure quantity is available</p><p>Prepares purchase orders and places orders from the list of screened venders</p><p>Reviews scheduled deliveries</p><p>Handles basic issues and problems</p><p>Possesses basic mathematical</p><p>Works under general supervision</p><p>Reports typically to a supervisor or manager</p><p><strong>Desired Candidate Profile</strong></p><p>By choosing to work at IDEMIA, you will join a unique tech company, offering a wide range of growth opportunities. You will contribute to a safer world, collaborating with an international and global community. We value the diversity of our teams and welcome people from all walks of life, regardless of how they look, where they come from, who they love, or what they think. We deliver cutting edge, future proof innovation that reach the highest technological standards and we re transforming, fast, to stay a leader in a world that s changing fast, too. At IDEMIA, people can develop their expertise and feel a sense of ownership and empowerment, in a global environment, as part of a company with the ambition and the ability to change the world.</p>

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About the Role</h3> <p style="margin:0 0 12px; **********<strong>;">PACC Offshore Services Holdings Ltd is seeking a <strong style="font-weight:700;">Coordinator Catering</strong> to join their team in Eastern, Saudi Arabia. This full-time role is essential for supporting catering operations across the Saudi fleet and managing related logistics and administrative tasks. The position requires 0-1 years of experience.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Support all catering operations onboard the Saudi fleet.</li> <li style="margin:0 0 6px;">Collect and submit monthly meal sheets for approval from the Aramco Tanajib office.</li> <li style="margin:0 0 6px;">Coordinate ship provision supply and provide logistic support.</li> <li style="margin:0 0 6px;">Assist with crew changes and Aramco ID appointments for catering-related third-party companies.</li> <li style="margin:0 0 6px;">Create Purchase Orders (POs) for all vessel catering needs using Ns &amp; SAP systems.</li> <li style="margin:0 0 6px;">Provide assistance with the operation and maintenance of the Saffaniya guest house catering.</li> <li style="margin:0 0 6px;">Assist with building maintenance and renovation for the Saffaniya guest house and warehouse.</li> <li style="margin:0 0 6px;">Offer operational support for guest house catering services.</li> <li style="margin:0 0 6px;">Oversee general maintenance for accommodation assets.</li> <li style="margin:0 0 6px;">Submit monthly Saffaniya office invoices after correction checks and assist with invoice uploads via Esker.</li> <li style="margin:0 0 6px;">Plan weekly menus and obtain necessary approvals.</li> <li style="margin:0 0 6px;">Manage room allotment for guest house staff and update allocations on a weekly basis.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Qualifications and Experience</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">A minimum of 0-1 years of relevant experience is required.</li> <li style="margin:0 0 6px;">Demonstrated ability to support catering and logistical operations.</li> <li style="margin:0 0 6px;">Experience with administrative tasks including invoice processing and PO creation.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Skills and Attributes</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Strong organizational and coordination skills.</li> <li style="margin:0 0 6px;">Proficiency in using systems like Ns &amp; SAP for procurement.</li> <li style="margin:0 0 6px;">Ability to manage multiple tasks and support various operational aspects.</li> <li style="margin:0 0 6px;">Attention to detail for invoice correction and data submission.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Work Environment</h3> <p style="margin:0 0 12px; </strong>********<strong>;">This is a full-time position based in Eastern, Saudi Arabia, involving support for offshore fleet operations and onshore guest house facilities.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Application Process</h3> <p style="margin:0 0 12px; </strong>**********;">Interested candidates are encouraged to apply. Salary details will be discussed during the interview process.</p>

<p><b>Job Summary:&nbsp;</b></p><p><br></p><p>We are seeking a passionate and skilled Android Engineer to join our ambitious startup team. The ideal candidate should have a strong technical background in Android application development, a solid understanding of mobile development best practices, and a genuine eagerness to learn and adapt to emerging technologies. You will get to work with the newest technologies such as Kotlin in a very modern code base.</p><p><b><br></b></p><p><b>Key Responsibilities:</b></p><ul><li>Android App Development: Design, develop, and maintain high-performance and reliable Android applications.</li><li>Collaborate with backend and design teams to define, design, and ship new features.</li><li>Code Review and Optimization: Conduct code reviews to ensure the quality and performance of the codebase.</li><li>Identify and implement optimizations to enhance the efficiency of existing code.</li><li>Technical Problem Solving: Troubleshoot, debug, and resolve technical issues in existing code.</li><li>Stay up-to-date with the latest Android development trends, tools, and technologies.</li><li>Collaborative Development: Collaborate with team members from various disciplines to deliver high-quality software solutions.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Computer Science, Software Engineering, or a related field.</li><li>5 years experience developing and deploying Android applications.</li><li>Strong knowledge of Kotlin.</li><li>Native development is your passion.</li><li>Maplibre knowledge is a plus.</li><li>Up to date with modern Android frameworks such as Kotlin and async/await</li><li>You work with RESTful APIs everyday, and have experience with authentication frameworks such as OAuth2 to connect Android applications to back-end services.</li><li>Solid understanding of Android design principles and Human Interface Guidelines.</li><li>Writing unit and UI Tests using Mokito and others.</li><li>You've worked in depth with a map SDK before, be it MapLibre, Apple Maps, Google Maps, ESRI or similar.</li><li>Eagerness to learn and adapt to new technologies and development methodologies.</li><li>Excellent problem-solving and analytical skills.</li><li>Strong communication and collaboration skills.</li></ul>

<p><strong>Mechanical Technician – After Sales (Power Generation)</strong></p><p><strong>Location:</strong> Saudi Arabia</p><p><strong>Job Summary</strong></p><p>We are seeking an experienced <strong>Mechanical Technician</strong> to join our After Sales team in <strong>Saudi Arabia</strong>. The successful candidate will be responsible for the installation, commissioning, preventive maintenance, troubleshooting, and repair of diesel generator mechanical systems (Gensets) at customer sites, ensuring reliable operation and high levels of customer satisfaction.</p><p><strong>Key Responsibilities</strong></p><ul><li>Perform preventive and corrective mechanical maintenance on diesel generators (Gensets).</li><li>Diagnose and troubleshoot mechanical faults in diesel engines and associated generator systems.</li><li>Carry out generator installation, commissioning, testing, and startup activities.</li><li>Inspect, repair, and replace mechanical components such as cooling systems, fuel systems, lubrication systems, belts, hoses, pumps, and engine parts.</li><li>Read and interpret mechanical drawings, technical manuals, and service documentation.</li><li>Use mechanical tools and diagnostic equipment to identify and resolve faults.</li><li>Prepare service reports and maintenance documentation after each site visit.</li><li>Ensure compliance with company safety policies and quality standards.</li><li>Provide technical support and maintenance recommendations to customers.</li><li>Travel to customer sites as required.</li></ul><p><strong>Requirements</strong></p><ul><li>Diploma or Technical Certificate in <strong>Mechanical Engineering</strong>, <strong>Mechanical Technology</strong>, or a related field.</li><li>Minimum <strong>3 years of experience</strong> in the maintenance and troubleshooting of <strong>diesel generators (Gensets)</strong>.</li><li>Strong knowledge of diesel engines, cooling systems, fuel systems, lubrication systems, and generator mechanical components.</li><li>Ability to read and interpret mechanical drawings and technical manuals.</li><li>Hands-on experience using mechanical tools and diagnostic equipment.</li><li>Good communication and customer service skills.</li><li>Basic English communication skills.</li><li>Valid driving licence is preferred.</li><li>Willingness to work overtime and on weekends when required.</li></ul><p><br></p>

In a world of possibilities, pursue one with endless opportunities. Imagine Next!<p> </p>At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.<p> </p> <p> </p> <p> <u> <b>Job Description:</b> </u> </p> <p>Parsons is looking for an amazingly talented <b>Lead Mechanical Engineer</b> to join our team! The Lead Mechanical is responsible in the areas of mechanical including developing polices, standards, inspection procedures, and evaluation tools for mechanical matters involving judicial branch facilities. Coordinates for activities such as plumbing, Fire Protection and Electrical engineering as part of the project requirement and ensure compliance based on the standard and statutory requirements.</p> <p> </p> <p> <b>What You'll Be Doing:</b> </p> <ul> <li>Lead the development of mechanical systems for the projects, ensuring compliance with industry standards, codes, and client requirements.</li> <li>Manage mechanical aspects of projects from conception to completion, including budgeting, scheduling, and coordinating with other disciplines and stakeholders.</li> <li>Provide technical guidance and expertise in mechanical systems design, installation, and operation, resolving complex engineering challenges as they arise.</li> <li>Ensure the quality and integrity of mechanical designs and installations through thorough reviews, inspections, and testing protocols.</li> <li>Lead and mentor a team of mechanical engineers and designers, fostering their professional growth and ensuring high standards of performance.</li> <li>Collaborate with contractors, vendors, and suppliers to procure mechanical equipment and materials, ensuring compliance with specifications and schedules.</li> <li>Identify potential risks and developing strategies to mitigate them, ensuring projects are delivered safely, on time, and within budget.</li> <li>Serve as the primary point of contact for clients regarding mechanical systems, addressing their concerns, and providing technical expertise and guidance throughout the project lifecycle.</li> <li>Ensure compliance with all relevant regulations, codes, and standards governing mechanical systems design, installation, and operation.</li> <li>Stay abreast of emerging technologies and best practices in mechanical engineering, implementing innovative solutions, and driving continuous improvement initiatives to enhance project outcomes and efficiency.</li> </ul> <p> </p> <p> <b>What Required Skills You'll Bring:</b> </p> <ul> <li>Bachelor's Degree in Mechanical Engineering.</li> <li>Professional certificate in MMUP Engineer Registration (UPDA) is preferred.</li> </ul> <ul> <li>14+ years of experience in mechanical engineering, focusing on construction oversight.</li> <li>Experience in stadium or large public venue projects is strongly preferred</li> <li>Experience in PMC roles is preferred.</li> <li>Mastery of engineering software tools such as AutoCAD, Revit, and MEP modeling software for designing and analyzing MEP systems.</li> </ul> <p> </p> <p> <b>What desired skills you'll bring:</b> </p> <ul> <li>Comprehensive understanding of mechanical, electrical, and plumbing systems, including design principles, installation methods, and operational requirements.</li> <li>Mastery of engineering software tools such as AutoCAD, Revit, and mechanical modeling software for designing and analyzing mechanical systems.</li> <li>Familiarity with building codes, regulations, and standards governing mechanical systems, ensuring compliance with local, national, and international requirements.</li> <li>Strong project management abilities to oversee mechanical projects, including planning, budgeting, scheduling, and coordination with other disciplines and stakeholders.</li> <li>Excellent problem-solving skills to identify and resolve complex technical issues related to MEP systems, ensuring efficient and effective project delivery.</li> <li>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</li> </ul> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p>Parsons equally employs representation at all job levels no matter the race, color, religion, sex (including pregnancy), national origin, age, disability or genetic information.<p> </p> <p> </p> <p>We truly invest and care about our employee s wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest APPLY TODAY!</p> <p> </p> <p> </p> <p>Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to<span> </span> <span>https://www.parsons.com/fraudulent-recruitment/</span> .</p>

<p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p>Parsons is looking for an amazingly talented Mechanical Engineer to join our team! The Mechanical Engineer will be responsible for providing technical engineering support for the design, coordination, construction, testing, commissioning, and handover of mechanical systems associated with airport, aviation, and infrastructure projects. The role will coordinate closely with multidisciplinary engineering teams, contractors, consultants, vendors, construction teams, Quality, HSE, Planning, and commissioning teams to ensure mechanical works are delivered in accordance with approved designs, project specifications, applicable codes and standards, and client requirements.</p><p><strong>What You'll Be Doing:</strong></p><ul><li>Review and coordinate mechanical engineering activities across aviation and infrastructure project packages.</li><li>Review mechanical drawings, specifications, calculations, equipment schedules, technical reports, and design documents.</li><li>Coordinate mechanical interfaces with Civil, Structural, Electrical, Instrumentation, Fire &amp; Life Safety, ICT, and architectural disciplines.</li><li>Provide technical support for airport and infrastructure mechanical systems, including HVAC, plumbing, drainage, pumping systems, utilities, and specialist mechanical systems as applicable.</li><li>Review mechanical equipment selections, technical specifications, data sheets, and vendor submissions.</li><li>Review contractor and supplier technical submittments and ensure compliance with project requirements.</li><li>Support the development and review of Material Submittals, Method Statements, Inspection &amp; Test Plans (ITPs), and technical submittals.</li><li>Review mechanical installation works and ensure compliance with approved drawings, specifications, and construction requirements.</li><li>Provide engineering support to construction teams and resolve technical issues encountered during site execution.</li><li>Review and respond to RFIs, technical queries, design clarifications, and site technical issues.</li><li>Conduct site inspections and monitor mechanical works for compliance with approved engineering requirements.</li><li>Coordinate with Quality teams to ensure required inspections and testing are completed.</li><li>Support testing, pre-commissioning, commissioning, and functional performance testing of mechanical systems.</li><li>Review testing and commissioning procedures and verify system performance against approved design requirements.</li><li>Support equipment start-up, functional testing, balancing, pressure testing, flushing, and system verification as applicable.</li><li>Coordinate mechanical interfaces and system integration with existing and new airport infrastructure.</li><li>Review design changes, technical alternatives, and proposed modifications and provide engineering recommendations.</li><li>Identify design coordination issues, constructability concerns, and technical risks and recommend appropriate mitigation measures.</li><li>Coordinate with Procurement and Vendors regarding technical requirements, equipment delivery, inspections, and technical documentation.</li><li>Participate in technical coordination meetings with consultants, contractors, suppliers, and project stakeholders.</li><li>Monitor engineering deliverables and technical actions to ensure timely closure.</li><li>Review and verify as-built drawings, O&amp;M manuals, testing records, commissioning documentation, and handover dossiers.</li><li>Support preparation of technical reports and progress updates for project management.</li><li>Ensure mechanical works comply with applicable ASHRAE, ASME, NFPA, IPC, IMC, SMACNA, ASTM, ISO, and other project-specific standards, as applicable.</li><li>Support value engineering and constructability initiatives to improve system performance, reliability, maintainability, and project cost effectiveness.</li><li>Coordinate with HSE teams to ensure mechanical works are executed in accordance with applicable safety requirements.</li><li>Provide technical guidance to junior engineers, inspectors, and site teams.</li><li>Support continuous improvement and lessons-learned activities related to mechanical engineering and project delivery.</li></ul><p><strong>What Required Skills You'll Bring:</strong></p><ul><li>Bachelor's degree in Mechanical Engineering or a related engineering discipline.</li><li>5+ years of relevant mechanical engineering experience.</li><li>Proven experience in airport, aviation, infrastructure, buildings, utilities, or major construction projects.</li><li>Good understanding of mechanical building services and infrastructure systems.</li><li>Experience working with multidisciplinary engineering teams, contractors, consultants, and vendors.</li><li>Good understanding of design, construction, testing, commissioning, and handover processes.</li><li>Professional Engineering certification is preferred.</li><li>PMP or equivalent project management training is an advantage.</li><li>LEED / CEM / ASHRAE certifications are advantageous depending on project requirements.</li><li>Relevant HSE certifications are an advantage.</li></ul><p>Mechanical Engineering Design HVAC Systems Chilled Water Systems Ventilation &amp; Air Conditioning Plumbing &amp; Drainage Systems Pumps &amp; Mechanical Equipment Water Supply &amp; Utility Systems Fire Protection Interface Mechanical Piping Equipment Selection &amp; Technical Specifications Mechanical Shop Drawing Review Technical Submittal Review Material Submittals Method Statements &amp; ITPs RFIs &amp; Technical Queries Site Engineering &amp; Construction Support Testing &amp; Commissioning TAB / System Balancing Pressure Testing &amp; Flushing Equipment Inspection Multidisciplinary Coordination Constructability Review Engineering Change Management As-Built Documentation O&amp;M and Handover Documentation Applicable ASHRAE / ASME / NFPA / IPC / IMC / SMACNA Standards AutoCAD / BIM / Revit awareness MS Office &amp; Technical Reporting</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Mechanical Engineering or a related engineering discipline.</li><li>5+ years of relevant mechanical engineering experience.</li><li>Proven experience in airport, aviation, infrastructure, buildings, utilities, or major construction projects.</li><li>Good understanding of mechanical building services and infrastructure systems.</li><li>Experience working with multidisciplinary engineering teams, contractors, consultants, and vendors.</li><li>Good understanding of design, construction, testing, commissioning, and handover processes.</li><li>Professional Engineering certification is preferred.</li><li>PMP or equivalent project management training is an advantage.</li><li>LEED / CEM / ASHRAE certifications are advantageous depending on project requirements.</li><li>Relevant HSE certifications are an advantage.</li></ul><p>Mechanical Engineering Design HVAC Systems Chilled Water Systems Ventilation &amp; Air Conditioning Plumbing &amp; Drainage Systems Pumps &amp; Mechanical Equipment Water Supply &amp; Utility Systems Fire Protection Interface Mechanical Piping Equipment Selection &amp; Technical Specifications Mechanical Shop Drawing Review Technical Submittal Review Material Submittals Method Statements &amp; ITPs RFIs &amp; Technical Queries Site Engineering &amp; Construction Support Testing &amp; Commissioning TAB / System Balancing Pressure Testing &amp; Flushing Equipment Inspection Multidisciplinary Coordination Constructability Review Engineering Change Management As-Built Documentation O&amp;M and Handover Documentation Applicable ASHRAE / ASME / NFPA / IPC / IMC / SMACNA Standards AutoCAD / BIM / Revit awareness MS Office &amp; Technical Reporting</p><p>Strong technical and analytical skills. Good engineering judgment and problem-solving abilities. Excellent communication and coordination skills. Ability to work effectively with multidisciplinary teams. Strong attention to detail and commitment to engineering quality. Proactive approach to identifying technical issues and risks. Good understanding of construction and site requirements. Ability to manage multiple technical activities and priorities. Strong stakeholder management and teamwork skills. Ability to work effectively under demanding project schedules. Willingness to mentor and support junior engineers. Strong commitment to safety, quality, and technical compliance.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Follow company rules and regulations including leave policies, working hours, shift schedules, and safety instructions, as well as Authority/Ministry requirements.&nbsp;<br>Prepare job lists and time schedules for planned down-day activities in coordination with the Chief Engineer – Electrical/mechanical &amp; Automation and arrange external service agencies or OEM service engineers for specialized jobs. Prepare annual shutdown job requirements with the Chief Engineer – Electrical/mechanical &amp; Automation and arrange external manpower or contractors and required spares for major jobs.&nbsp;<br>Plan and arrange required spares, services, and contractors for annual shutdown activities.&nbsp;<br>Possess thorough technical knowledge of EAF-based steel plant equipment.&nbsp;<br>Study system and equipment drawings and select appropriate tools for special or critical jobs in coordination with the Chief Engineer – Electrical/mechanical &amp; Automation and follow up with the Purchase Department for procurement.&nbsp;<br>Coordinate with Purchase to locate alternate brands or manufacturers for required commercial items.<br>Coordinate with production, maintenance, and safety teams to align maintenance schedules with operational priorities. Prepare annual electrical/mechanical and automation spares, consumables, and tools lists in coordination with the Chief Engineer – Electrical/mechanical &amp; Automation. &nbsp;<br>Prepare purchase requisitions for spares, consumables, and tools according to required schedules in coordination with the Chief Engineer – Electrical/mechanical &amp; Automation.&nbsp;<br>Follow up with the Purchase Department to support timely procurement of spares, consumables, and tools.<br>Report backlog status and planning performance and recommend areas that may require improvement.&nbsp;<br>Coordinate with the Chief Engineer – Electrical/mechanical &amp; Automation and the Purchase department to explore alternate or local vendors for spares and follow up on actions that may reduce maintenance cost.&nbsp;<br>Coordinate preparation of work orders, spare parts requests, and electrical/mechanical documentation.&nbsp;<br>Perform other tasks and duties assigned by the superior.&nbsp;<br>Coordinate with the Chief Engineer – Electrical/mechanical &amp; Automation in compiling maintenance budget inputs for spares, services/contractors, modifications, improvement projects, and civil/building requirements.<br>Ensure full compliance with all safety directives issued by Management.&nbsp;<br>Audit electrical/mechanical records, test reports, and complete work orders to verify compliance with standards.&nbsp;<br>Develop multiple suppliers for each major spare/item who are technically suitable &nbsp;<br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p><strong>Position Summary:</strong></p><p>The Mechanical Technician will be responsible for the installation, inspection, preventive maintenance, troubleshooting, and repair of mechanical systems and equipment across commercial, industrial, and infrastructure facilities. The role ensures all mechanical assets operate safely, efficiently, and in compliance with company procedures, client requirements, and international standards.<br></p><p><strong>Key Responsibilities</strong></p><ul><li>Perform preventive, corrective, and breakdown maintenance on mechanical systems and equipment.</li><li>Install, inspect, troubleshoot, and repair HVAC equipment, pumps, motors, compressors, fans, piping systems, and mechanical equipment.</li><li>Carry out maintenance of chilled water systems, ventilation systems, AHUs, FCUs, exhaust fans, and associated components.</li><li>Maintain plumbing systems, water supply networks, drainage systems, valves, and fixtures.</li><li>Assist in the maintenance and testing of firefighting mechanical systems, including pumps, sprinkler piping, hose reels, and related equipment.</li><li>Diagnose mechanical faults and implement effective corrective actions to minimize equipment downtime.</li><li>Read and interpret mechanical drawings, P&amp;IDs, equipment manuals, and technical documentation.</li><li>Perform equipment alignment, lubrication, replacement of bearings, seals, couplings, belts, and other mechanical components.</li><li>Conduct inspections and record maintenance activities using work orders and maintenance management systems.</li><li>Support commissioning, testing, and startup activities for new mechanical installations.</li><li>Ensure compliance with safety regulations, permit-to-work requirements, lockout/tagout (LOTO), and company HSE procedures.</li><li>Coordinate with supervisors, engineers, and other trades to complete maintenance activities efficiently.</li><li>Maintain tools, equipment, and work areas in a clean and safe condition.</li><li>Respond promptly to emergency maintenance requests.<br></li></ul><p><strong>Qualifications:</strong></p><ul><li>Diploma or ITI in Mechanical Engineering, HVAC, Industrial Maintenance, or a related technical discipline.</li><li>3–5 years of experience in mechanical maintenance within facilities management, MEP, industrial plants, commercial buildings, or infrastructure projects.</li><li>GCC or Saudi Arabia experience is preferred.</li><li>Valid Saudi Council Certificate as "Technician"</li></ul><p><br></p><p><strong>Technical Skills:</strong></p><ul><li>Knowledge of HVAC systems and mechanical maintenance practices.</li><li>Experience with pumps, motors, compressors, piping systems, and rotating equipment.</li><li>Understanding of plumbing and firefighting mechanical systems.</li><li>Ability to interpret engineering drawings and maintenance manuals.</li><li>Familiarity with preventive maintenance programs and CMMS is an advantage.</li><li>Basic knowledge of electrical and control systems related to mechanical equipment.</li><li>Strong troubleshooting and fault-finding skills.<br></li></ul><p><strong>Soft Skills:</strong></p><ul><li>Good communication and teamwork skills.</li><li>Strong problem-solving ability.</li><li>Ability to work under pressure and meet deadlines.</li><li>High level of safety awareness.</li><li>Willingness to work shifts or attend emergency call-outs when required.<br></li></ul><p><strong>Certifications (Preferred)</strong></p><ul><li>HVAC Technician Certification.</li><li>Saudi Council of Engineers (where applicable).</li><li>Occupational Safety or HSE certification.</li><li>Valid Saudi driving license is an advantage.</li></ul><p><br></p>

<p><b>Responsibilities:</b></p><ul><li>Lead the design, development, and implementation of mechanical systems and components for the infrastructure project.</li><li>Collaborate with other engineering disciplines to ensure the integration of mechanical systems with overall project requirements.</li><li>Conduct feasibility studies and risk assessments related to mechanical systems and components.</li><li>Provide technical expertise and guidance to project team members and stakeholders.</li><li>Oversee the procurement, installation, and commissioning of mechanical equipment and systems.</li><li>Develop and implement quality control procedures to ensure the reliability and safety of mechanical systems.</li><li>Manage and coordinate with external vendors, contractors, and consultants involved in the mechanical aspects of the project.</li><li>Review and approve mechanical engineering designs, specifications, and documentation.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Mechanical Engineering or related field. Master's degree or higher preferred.</p><p>Professional Engineer (PE) license preferred.</p><p>A minimum of 15 years of experience in mechanical engineering, with a proven track record of working on large-scale infrastructure projects.</p><p>Extensive knowledge of mechanical engineering principles, standards, and practices.</p><p>Proficiency in CAD software and other relevant engineering tools.</p><p>Strong project management and communication skills.</p><p>Ability to work effectively within a multidisciplinary team and manage multiple priorities.</p><p>Thorough understanding of relevant industry regulations and codes.</p>

<h3 >About The Ritz-Carlton</h3> <p >The Ritz-Carlton, part of the Marriott International portfolio of brands, operates over 100 award-winning properties worldwide. The company is dedicated to creating exceptional guest experiences and fostering an environment where associates are empowered to be creative, thoughtful, and compassionate. The Ritz-Carlton upholds its "Gold Standards," which guide its commitment to luxury service and guest care, and values the diverse backgrounds, cultures, talents, and experiences of its associates.</p> <h3 >Role Summary</h3> <p >The Receiving position at The Ritz-Carlton involves managing the intake and processing of all incoming deliveries and freight. This role is essential for ensuring the accurate receipt, tracking, and distribution of merchandise and packages within the facility, while adhering to established company policies and safety guidelines. This is a full-time position suitable for candidates with 0-1 years of experience.</p> <h3 >Key Responsibilities</h3> <ul > <li >Receive, unload, and process deliveries, accounting for incoming freight based on invoices and receiving reports.</li> <li >Stage merchandise by department, mark items for placement, and deliver them to the appropriate departments.</li> <li >Verify and track received inventory, completing inventory reports and logs accurately.</li> <li >Reconcile shipping invoices and receiving reports to ensure count accuracy.</li> <li >Receive, store, ship, and deliver incoming and outgoing department packages and mail.</li> <li >Secure the receiving room and its contents, ensuring the safekeeping of all packages.</li> <li >Follow all national, state, and local hazardous material shipping guidelines and regulations.</li> <li >Ship all outgoing mail and packages, verifying quantity and condition upon receipt prior to guest delivery.</li> <li >Communicate with guests regarding received packages and maintain an accurate tracking system for all shipping and receiving transactions, including obtaining guest signatures.</li> <li >Report any loss or damage with packages to the appropriate management.</li> <li >Report accidents, injuries, and unsafe work conditions to the manager, and complete required safety training and certifications.</li> <li >Adhere to all company policies and procedures, maintain a professional appearance, ensure confidentiality of proprietary information, and protect company assets.</li> <li >Address guests' service needs professionally, positively, and promptly, using clear and professional language.</li> </ul> <h3 >Required Qualifications and Skills</h3> <ul > <li >Experience: 0-1 years in a related receiving or inventory management role.</li> <li >Ability to read and visually verify information in various formats, including small print.</li> <li >Capability to visually inspect tools, equipment, or machines to identify defects.</li> <li >Physical ability to move, lift, carry, push, pull, and place objects weighing up to 50 pounds without assistance.</li> <li >Proficiency in grasping, turning, and manipulating objects of varying size and weight, requiring fine motor skills and hand-eye coordination.</li> <li >Ability to navigate narrow, confined, or elevated spaces, as well as sloping, uneven, or slippery surfaces, and stairs/ramps.</li> <li >Capability to reach overhead and below the knees, including bending, twisting, pulling, and stooping.</li> <li >Strong communication skills for interacting with guests and colleagues.</li> </ul> <h3 >Work Environment and Culture</h3> <p >The Ritz-Carlton fosters an inclusive work environment that values diversity and provides equal opportunities. Associates are encouraged to develop positive working relationships and contribute to a culture that upholds the company's "Gold Standards" of service excellence. This role operates within a team-oriented setting where adherence to company policies and safety protocols is paramount.</p> <h3 >Application Information</h3> <p >The Ritz-Carlton is an equal opportunity employer committed to non-discrimination on any protected basis. We invite qualified candidates to apply and join a global team dedicated to delivering exceptional luxury hospitality experiences.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International’s founders established a simple yet powerful formula:</p><br><p>Approach each client engagement as a&amp;nbsp;<strong>partnership</strong>, create an environment that attracts the&amp;nbsp;<strong>most talented professionals</strong>&amp;nbsp;and allows them to flourish, and regulate&amp;nbsp;<strong>growth</strong>&amp;nbsp;to maintain&amp;nbsp;<strong>excellence</strong>&amp;nbsp;in our service standards.</p><br><br><p>If you are interested in a long and rewarding career working with high-profile clients on some of the most challenging projects in the world, then Decima is where you belong. At Decima, you will be able to explore incredible growth and professional development opportunities.</p><br><p>We are looking for a driven and capable <strong>Safety Engineer</strong> to support mission-critical data center projects in KSA. This role will conduct technical and safety reviews of Standard Operating Procedures, Emergency Operating Procedures, and Methods of Procedure to ensure safe execution of operational activities across critical facility environments.</p><br><p>The ideal candidate has strong construction or industrial safety experience, direct exposure to mission-critical facilities or complex industrial operations, and the ability to evaluate procedures for hazards, risk controls, regulatory compliance, and operational reliability.</p><br><p>This is a hands-on, project-facing role focused on procedure review, hazard identification, operational risk assessment, regulatory compliance, and continuous improvement of safety documentation. The role requires strong technical review skills, attention to detail, and the ability to coordinate with Operations, Engineering, Quality, Commissioning, and EHS teams.</p><br><p><strong>RESPONSIBILITIES</strong></p><br><ul><li>Perform detailed technical and safety reviews of SOPs, MOPs, and EOPs for mission-critical data center facilities.</li><li>Verify procedures accurately reflect current as-built conditions, equipment configurations, operating sequences, and facility requirements.</li><li>Ensure procedures are technically accurate, complete, properly controlled, and free of conflicting, outdated, redundant, or ambiguous instructions.</li><li>Evaluate procedures for personnel hazards, operational risks, safety precautions, required controls, and potential impact on facility uptime.</li><li>Perform formal risk assessments and hazard analyses for planned maintenance, equipment shutdowns, electrical switching, generator operations, UPS maintenance, mechanical system maintenance, cooling system operations, utility transfers, and emergency response activities.</li><li>Verify compliance with applicable Saudi Arabian occupational safety regulations, client requirements, relevant NFPA guidance, OSHA principles where contractually required, and accepted international safety best practices.</li><li>Review implementation of LOTO, electrical safe work practices, arc flash hazard controls, PPE requirements, energized electrical work permits, confined space entry, hot work, working at heights, permit-to-work systems, and isolation verification requirements.</li><li>Confirm that required PPE, prerequisites, contingency steps, rollback steps, and safety controls are clearly identified before procedure execution.</li><li>Validate equipment identification numbers, breaker numbers, valve designations, system references, one-line diagrams, P&amp;amp;IDs, equipment schedules, and as-built documentation.</li><li>Participate in technical review meetings, safety workshops, and procedure validation discussions.</li><li>Provide clear recommendations to improve procedure quality, consistency, safety, and operational reliability.</li><li>Support standardized procedure formats, procedure governance, periodic review programs, corrective actions, and continuous improvement across multiple facilities.</li></ul><p><strong>QUALIFICATIONS</strong></p><br><p><strong>Required qualifications:</strong></p><br><ul><li>Bachelor’s degree in Safety Engineering, Occupational Health and Safety, Mechanical Engineering, Electrical Engineering, Industrial Engineering, or a related technical discipline preferred.</li><li>Minimum <strong>10 years</strong> of experience in construction safety, industrial safety, operational safety, commissioning, facility operations, or a related safety function.</li><li>Minimum <strong>5 years</strong> of direct experience in mission-critical facilities, industrial operations, power generation, data centers, commissioning, or facility operations.</li><li>Demonstrated experience reviewing, developing, or approving SOPs, MOPs, and EOPs for critical facilities or complex operational environments.</li><li>Experience performing operational risk assessments, hazard analyses, and procedure-based safety reviews.</li><li>Strong understanding of electrical and mechanical systems commonly found in data centers or comparable critical facilities.</li><li>Knowledge of LOTO, permit-to-work systems, electrical switching procedures, isolation verification, energized electrical work, PPE requirements, and operational risk management.</li><li>Ability to verify procedures against current drawings, one-line diagrams, P&amp;amp;IDs, equipment schedules, as-built documentation, and technical records.</li><li>Strong understanding of Saudi Arabian safety regulations, client safety requirements, relevant NFPA guidance, OSHA principles where applicable, and international safety best practices.</li><li>Exceptional attention to detail with the ability to identify technical, procedural, regulatory, and safety deficiencies.</li><li>Excellent analytical, problem-solving, documentation, written communication, and verbal communication skills.</li><li>Ability to work effectively with Operations, Engineering, Quality, Commissioning, EHS, contractor, consultant, and client stakeholder teams.</li><li>Commitment to maintaining high standards of safety, operational excellence, regulatory compliance, and reliable data center operations.</li></ul><p><strong>Preferred qualifications:</strong></p><br><ul><li>Direct experience supporting data center operations, mission-critical facilities, commissioning, quality management, or facility operations and maintenance.</li><li>Experience with critical electrical distribution systems, generator systems, UPS systems, chilled water systems, cooling systems, and related infrastructure.</li><li>Minimum 5 years of experience reviewing or developing operational procedures for complex critical facilities.</li><li>Experience evaluating operational procedures for compliance with safety regulations, client requirements, and international standards.</li><li>Experience supporting mission-critical facilities within KSA or the broader Middle East region.</li><li>Relevant professional certifications such as CSP, ASP, CHST, NEBOSH International General Certificate or Diploma, OSHA 30-Hour Construction or General Industry, NFPA 70E, Certified Energy Isolation Professional, First Aid, CPR, or AED.</li><li>Experience supporting procedure governance, audit readiness, operational readiness, safety workshops, or continuous improvement programs across multiple facilities.</li></ul><p><strong>POSITION DETAILS</strong></p><br><ul><li><strong>Location (On-site):</strong> Kingdom of Saudi Arabia</li><li><strong>Position:</strong> Safety Engineer</li><li><strong>Position Classification:</strong> Project-Based</li></ul><p><strong>Please note:&amp;nbsp;</strong>This position is part of our anticipated expansion in&amp;nbsp;<strong>KSA</strong>. While we are excited about the opportunities this role will offer, the position is not currently active and is associated with the planned launch of our operations in the region. By applying, you acknowledge that this is a future opportunity and not an offer of immediate employment. We appreciate your interest and encourage you to express your intent to be considered once the role becomes available.</p><br><br><p>Decima International is an Equal Opportunity Employer that is committed to the safety and well-being of all. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law.</p><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>Position Title: Mechanical Technician Reports to:Mechanical Engineer / Supervisor Function: Maintenance Job Location: Al Madinnah Al Manwarah, Sidra JOB PURPOSE: To carry out maintenance, modification, overhauling and installation activities on the mechanical machinery in accordance with standard operating procedures, HSE guidelines and quality standards to attain effective functionality and reliability.</p><h3>KEY ACCOUNTABILITIES:</h3><p>Description Mechanical Maintenance</p><ul><li>Carry out required daily mechanical maintenance work and routine preventative mechanical maintenance work according to set schedules and ACWA NOMAC procedures to facilitate continuous operations.</li><li>Monitor the physical condition of all machines in assigned plant and report non-conformances to Mechanical Engineer / Supervisor to facilitate effective maintenance of all ACWA NOMAC facilities as per set Quality/ HSE standards.</li><li>Respond to mechanical failures and implement corrective actions in adherence with procedures and guidelines to reduce downtime and maximize functionality of equipment.</li><li>Trouble shoot using necessary tools and spare parts which include diagnosis, repairing and checking equipment for corrosion, cracks, leaks, failures and perform necessary routine repairs to facilitate uninterrupted operations and minimize downtime.</li><li>Diagnose causes of mechanical malfunction or failure of operational equipment such as defective parts replacement, adjustment, alignment, oiling, greasing and boiling and take corrective measures in collaboration with Mechanical Engineer / Supervisor.</li><li>Read and understand technical manuals, mechanical diagrams and machinery drawings and apply the knowledge to carry out maintenance and troubleshooting tasks, to prepare for the mechanical maintenance to machinery in the assigned area</li></ul><h3>Inventory</h3><ul><li>Check the necessary stock levels of spare parts to support effective inventory control.</li></ul><h3>Documentation</h3><ul><li>Update the maintenance logbook and record details of work carried out including defaults, problems, various findings and conditions of all machines to ensure timely availability of information and organized referencing</li></ul><h3>Continuous Improvement</h3><ul><li>Contribute in the identification and implementation of change initiatives, programmes and projects in line with the organization s standards.</li></ul><h3>Policies, Processes, Systems &amp; Procedures</h3><ul><li>Adhere to all relevant organizational and departmental policies, processes, standard operating procedures and instructions so that work is carried out to the required standard and in a consistent manner.</li></ul><h3>Health, Safety, Security &amp; Environment</h3><ul><li>Adhere to all relevant health, safety, security and environmental procedures, instructions and controls so that the safety of employees and environmental compliance can be guaranteed.</li></ul><h3>Related Assignments</h3><ul><li>Perform any other duties which the line manager may require to be carried out.</li></ul><p><strong>Desired Candidate Profile</strong></p><h3>QUALIFICATIONS, EXPERIENCE, &amp; SKILLS:</h3><ul><li>Minimum Qualifications: A technical certificate / Associate s Diploma in Mechanical maintenance.</li><li>Minimum Experience: 3-5 years experience in mechanical maintenance as a technician in installation, maintenance and repair of mechanical equipment and installations in a plant environment.</li><li>Skills: Practical Knowledge of relevant plant equipment Practical knowledge of mechanical maintenance principles including but not limited to identification, classification, disposal of waste and emission monitoring Awareness of HSE &amp; quality standards Teamwork and effective collaboration skills</li></ul>

<p>1. Mechanical Inspector (B-tech/Diploma Mechanical+ CSWIP 3.1/ AWS+ Min 6 /10 years of QC exp)</p><p>2. Sr. Mechanical (B-tech/Diploma Mechanical+ CSWIP 3.2/ AWS+ Min 8/12 years of QC exp): Mode of interview : Zoom Online Video call</p><p>Driving License: Candidate must hold a valid LMV driving license from either the home country or a Gulf country.</p><p>Document Verification: All certificates and documents must be thoroughly checked prior to submission.</p><p><strong>Desired Candidate Profile</strong></p><p>Mechanical Inspector (B-tech/Diploma Mechanical+ CSWIP 3.1/ AWS+ Min 6 /10 years of QC exp)</p><p>Sr. Mechanical (B-tech/Diploma Mechanical+ CSWIP 3.2/ AWS+ Min 8/12 years of QC exp)</p><p>Candidate must hold a valid LMV driving license from either the home country or a Gulf country.</p>

<p>We are seeking an experienced Senior Mechanical Engineer to handle industrial mechanical projects across Saudi Arabia. The role will be responsible for the planning, coordination, execution, and technical supervision of mechanical projects within industrial plants.</p><p>Position: Senior Mechanical Engineer / Mechanical Engineer</p><p>Experience: 8 9 years</p><p>Office Location: Dammam, Saudi Arabia</p><p>Site Location: Various project sites across Saudi Arabia</p><p>Qualification: Bachelor s Degree in Mechanical Engineering</p><p>Key Responsibilities</p><ul><li>Review project specifications, scope of work, PFDs, P&amp;IDs, GA drawings, layouts, and fabrication drawings.</li><li>Prepare material take-offs, BOMs, purchase requisitions, and technical submittals.</li><li>Coordinate with clients, consultants, vendors, subcontractors, procurement teams, and multidisciplinary engineering teams.</li><li>Supervise site fabrication, equipment erection, and related civil-interface works.</li><li>Monitor project schedules, manpower, materials, work progress, and subcontractor performance.</li><li>Review vendor drawings, technical offers, equipment specifications, and fabrication documentation.</li><li>Ensure compliance with approved drawings, project specifications, applicable codes, and quality requirements.</li><li>Resolve site technical issues and manage design or field modifications through approved procedures.</li><li>Prepare method statements, inspection requests, progress reports, punch lists, as-built drawings, and O&amp;M documentation.</li><li>Coordinate mechanical completion, pre-commissioning, commissioning, and final project handover.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s Degree in Mechanical Engineering. 8+ years of experience in mechanical design and project execution. Strong experience in industrial mechanical projects and site execution. Proficiency in: AutoCAD SolidWorks Autodesk Inventor Strong technical project documentation skills.</p>