Ship Mechanic Jobs

Job description:<br><br>We’re Hiring | Supervisor - Fleet Join NADEC and play a key role in maintaining a safe, reliable, and highly available fleet that supports our daily distribution operations. As a Fleet Workshop Supervisor, you will oversee workshop and fleet maintenance activities, ensuring maximum vehicle availability, minimum downtime, effective maintenance cost control, and reliable operation of vehicles and their cooling/refrigeration units.<br>Location: Hail <br><br>Key Responsibilities Maximize fleet availability and minimize vehicle downtime through effective maintenance planning and follow-up. Plan and monitor preventive and corrective maintenance within agreed timelines. Manage workshop manpower, workflow, productivity, quality, and safety. Control maintenance costs without compromising vehicle reliability, safety, quality, or appearance. Provide technical guidance and support to workshop and operating teams. Ensure effective maintenance and follow-up of vehicle cooling units and refrigeration systems. Coordinate with leasing companies and service providers for maintenance and accident repairs. Ensure timely completion and monitoring of TAMM, Bayan, TGA, and other fleet regulatory requirements. Ensure accurate and timely SAP updates and maintenance records. Monitor fleet-related activities including fuel, GPS, HHT, and operational equipment. Maintain vehicle condition, livery, workshop scrap records, and asset documentation. Prepare daily, weekly, and monthly fleet/workshop performance reports. Coordinate with Sales and other functions to resolve fleet-related operational issues. Drive continuous improvement and cost-saving initiatives while maintaining service quality. What We’re Looking For Automobile/Mechanical Engineering qualification or Higher Diploma. 2–3 years of relevant Fleet/Workshop/Maintenance experience. Strong hands-on knowledge of commercial vehicle preventive and corrective maintenance. Good technical knowledge of vehicle cooling/refrigeration units. Experience managing workshop teams, workflow, productivity, and safety. Familiarity with ERP/SAP systems. Strong troubleshooting, decision-making, and problem-solving capabilities. FMCG, dairy, food distribution, or temperature-controlled fleet experience is highly preferred.

SECTION I: Job Summary <br><br>The QA/QC Supervisor oversees day-to-day quality control activities across all site disciplines, supervising QC Inspectors, coordinating inspection and test plan execution, and ensuring consistent application of quality standards and procedures.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Supervise and coordinate the daily activities of QC Inspectors across all disciplines Ensure inspections, tests, and hold points are executed per approved Inspection & Test Plans (ITPs) Review daily QC inspection reports and ensure timely, accurate documentation Coordinate hold point notifications and inspection scheduling with client/third-party inspectors Support the QC Manager in managing the Non-Conformance Report (NCR) process and corrective actions Conduct quality walkdowns and spot-check inspections across active work fronts Verify calibration and control of inspection and test equipment used by the QC team Coordinate training and technical guidance for QC Inspectors on inspection procedures and standards Liaise with construction supervision to resolve quality-related work front issues Support preparation and compilation of quality documentation for handover dossiers Report quality performance, trends, and issues to the QC Manager Support internal quality audits and readiness for client/third-party audits<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Number and severity of non-conformances (NCRs) Inspection schedule/hold point compliance First-time inspection pass rate across disciplines Timely closure of NCRs and punch-list items Quality of QC team documentation and reporting<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Leadership Attention to Detail Analytical Thinking Communication Skills Decision Making Accountability<br><br>Technical Skills<br><br> Quality Management Systems (ISO 9001) Inspection & Test Plan (ITP) Coordination Multidiscipline Inspection Standards Awareness NCR & Corrective Action Management QC Team Supervision & Scheduling Reading Technical Drawings & Specifications (multidiscipline)<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 8-10 years of experience in quality control on EPC/industrial construction projects, including supervisory experience<br><br>Education<br><br> Bachelor's degree in Engineering (Civil/Mechanical) or a related field QC/inspection certification preferred

Qiddiya is Saudi Arabia's future capital of entertainment, sports, and culture, bringing together world-class hospitality, leisure, entertainment, and mixed-use assets within one of the Kingdom's most ambitious developments.<br><br>The role will provide owner-side oversight of asset condition, engineering performance, lifecycle planning, maintenance strategies, capital investment, operational readiness, and technical risk. Working closely with internal teams, operators, consultants, and service providers, the Director will ensure assets are safe, compliant, reliable, efficient, and maintained to world-class standards.<br><br>This is an opportunity to shape the long-term performance of complex destination assets and protect their operational reliability, guest experience, sustainability, and long-term value.<br><br>Application will close on the 28th of Sept.<br><br>Key Responsibilities<br><br>Develop technical asset strategies, lifecycle plans, and capital investment priorities Lead asset condition assessments, technical due diligence, and engineering audits Oversee asset reliability, maintenance performance, statutory compliance, and technical risk Review and challenge operator and facilities management technical plans, budgets, and performance Support design reviews, testing, commissioning, operational readiness, and asset handover Manage defects, warranties, asset information, and technical documentation Lead technical input into refurbishment, enhancement, and capital projects Drive improvements in energy efficiency, sustainability, asset condition, and whole-life cost Prepare technical recommendations and reports for senior leadership<br><br>Requirements<br><br>Bachelor's degree in Mechanical, Electrical, Civil, Structural, Building Services Engineering, Facilities Management, Construction Management, or a related discipline15+ years of experience in technical asset management, engineering, facilities management, building operations, or capital planning Strong experience with complex operating assets and major building systems Experience in lifecycle planning, maintenance strategy, capex development, commissioning, handover, and defect management Strong understanding of MEP systems, fire and life safety, HSE, sustainability, and statutory compliance Experience within hospitality, mixed-use, entertainment, leisure, real estate, or large-scale destination assets is preferred Relevant professional certification such as Chartered Engineer, CFM, PMP, RICS, or IAM is preferred

<p>Qiddiya is Saudi Arabia s future capital of entertainment, sports, and culture, bringing together world-class hospitality, leisure, entertainment, and mixed-use assets within one of the Kingdom s most ambitious developments. </p> <p>The role will provide owner-side oversight of asset condition, engineering performance, lifecycle planning, maintenance strategies, capital investment, operational readiness, and technical risk. Working closely with internal teams, operators, consultants, and service providers, the Director will ensure assets are safe, compliant, reliable, efficient, and maintained to world-class standards.</p> <p>This is an opportunity to shape the long-term performance of complex destination assets and protect their operational reliability, guest experience, sustainability, and long-term value.</p> <p> </p> <p>Application will close on the 28th of Sept. </p> <p> </p><b> Key Responsibilities </b><ul> <li>Develop technical asset strategies, lifecycle plans, and capital investment priorities.</li> <li>Lead asset condition assessments, technical due diligence, and engineering audits.</li> <li>Oversee asset reliability, maintenance performance, statutory compliance, and technical risk.</li> <li>Review and challenge operator and facilities management technical plans, budgets, and performance.</li> <li>Support design reviews, testing, commissioning, operational readiness, and asset handover.</li> <li>Manage defects, warranties, asset information, and technical documentation.</li> <li>Lead technical input into refurbishment, enhancement, and capital projects.</li> <li>Drive improvements in energy efficiency, sustainability, asset condition, and whole-life cost.</li> <li>Prepare technical recommendations and reports for senior leadership.</li> </ul><p><strong>Desired Candidate Profile</strong></p><ul> <li>Bachelor s degree in Mechanical, Electrical, Civil, Structural, Building Services Engineering, Facilities Management, Construction Management, or a related discipline.</li> </ul> <ul> <li>15+ years of experience in technical asset management, engineering, facilities management, building operations, or capital planning.</li> <li>Strong experience with complex operating assets and major building systems.</li> <li>Experience in lifecycle planning, maintenance strategy, capex development, commissioning, handover, and defect management.</li> <li>Strong understanding of MEP systems, fire and life safety, HSE, sustainability, and statutory compliance.</li> <li>Experience within hospitality, mixed-use, entertainment, leisure, real estate, or large-scale destination assets is preferred.</li> <li>Relevant professional certification such as Chartered Engineer, CFM, PMP, RICS, or IAM is preferred.</li> </ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Description</b>Overview<p>The Lead MEP Engineer will act as the Consultant's representative on-site, leading and managing all Mechanical, Electrical, and Plumbing (MEP) supervision activities for large-scale buildings, mixed-use developments, and theme park projects. The role is responsible for ensuring that all MEP works are executed in accordance with the contract requirements, approved designs, quality standards, project schedules, and regulatory requirements while coordinating with multidisciplinary stakeholders throughout the project lifecycle.</p><br>Your role<ul><li>Lead the site supervision of all MEP works including HVAC, electrical, plumbing, fire protection, ELV, and specialist systems.</li><li>Ensure contractor compliance with approved drawings, specifications, method statements, and project standards.</li><li>Manage and coordinate MEP interfaces with architectural, structural, fit-out, and themed attraction works.</li><li>Review and provide technical comments on shop drawings, material submittals, RFIs, and design changes.</li><li>Monitor construction progress and identify potential risks impacting cost, quality, or schedule.</li><li>Conduct site inspections and ensure works comply with project specifications and applicable codes.</li><li>Lead testing, commissioning, integrated systems testing, and handover activities.</li><li>Coordinate closely with contractors, specialist vendors, ride suppliers, and themed entertainment contractors.</li><li>Review contractor claims, variation orders, and progress reports.</li><li>Verify completed works and provide recommendations for payment certifications.</li><li>Ensure implementation of QA/QC procedures and HSE requirements across all MEP activities.</li><li>Attend client, consultant, and contractor meetings and provide technical leadership on project delivery matters.</li><li>Support Resident Engineer and Project Director in managing project objectives and resolving technical challenges.</li></ul><p>About you</p><br><ul><li>Bachelor's Degree in Mechanical Engineering, Electrical Engineering, Building Services Engineering, or a related discipline.</li><li>15+ years of experience in MEP engineering and construction supervision.</li><li>Minimum 5 years in a Lead MEP Engineer role on major building developments.</li><li>Proven experience in mixed-use developments, high-rise buildings, hospitality, entertainment destinations, and theme park projects.</li><li>Strong knowledge of building services systems including HVAC, electrical distribution, fire protection, plumbing, ICT, security, and BMS systems.</li><li>Experience managing multidisciplinary MEP teams within a consultancy-led site supervision environment.</li><li>Strong understanding of international building codes, industry standards, and Saudi regulations.</li><li>Proficiency in AutoCAD, MS Office, BIM platforms, and project management software.</li></ul><p><b>Preferred Experience</b></p><br><ul><li>Previous experience on major KSA giga-projects and large-scale mixed-use developments.</li><li>Experience in theme parks, entertainment venues, visitor attractions, resorts, hotels, retail districts, and leisure developments.</li><li>Familiarity with complex themed environments, show buildings, attraction facilities, and specialty MEP systems.</li><li>Prior experience working with international engineering consultancy firms.</li></ul><p><b>Key Competencies</b></p><br><ul><li>MEP Site Supervision</li><li>Building Services Engineering</li><li>Theme Park &amp; Entertainment Projects</li><li>Mixed-Use Development Projects</li><li>Testing &amp; Commissioning</li><li>Quality Assurance &amp; Quality Control</li><li>Contract Administration</li><li>Stakeholder Management</li><li>Technical Leadership</li><li>Risk &amp; Issue Management</li><li>Client Relationship Management</li></ul><span>Rewards &amp; benefits</span><p><span>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.</span></p><br><p><span>This includes:</span></p><br><ul><li>Tax-free salary.</li><li>Life insurance coverage.</li><li>Medical insurance.</li><li>Annual leave balance.</li><li>Company gratuity scheme.</li><li>Discretionary bonus program.</li><li>Annual flight contribution.</li><li>Transportation &amp; housing allowances.</li><li>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, familycare, personal health, fitness, and nutrition.</li></ul><p><span>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</span></p><br><span>About AtkinsRéalis</span><p><span>We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people. </span></p><br><p><span>Find out more.</span></p><br><b>Worker Type</b>Employee<b>Job Type</b>Regular<p><span><i>At </i></span> <i><span>AtkinsRéalis</span></i><span><i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. &nbsp;</i></span></p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 5+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>Your role Mission To maintain regular contact with all customers with effective / frequent visit plan to achieve business goals and maximize sales across the assigned territory. Achieve sales targets in terms of revenue and volume by identifying, developing, and securing new business opportunities. Maintain regular and structured contact with customers through an effective visit plan to maximize sales and strengthen relationships. Build and sustain long-term partnerships with new and existing customers, including key decision-makers, to increase market share and company presence. Prepare and manage technical proposals and bid submissions, including calculating sales prices, preparing bid documentation, completing technical data sheets and conducting necessary follow-ups. Collaborate with business line manager and product marketing teams to deliver tailored, energy-efficient, and sustainable solutions that meet customer requirements. Provide accurate technical support and respond effectively to customer inquiries.Work closely with the aftermarket team to ensure high levels of customer satisfaction and service quality. Monitor competitor activities and industry trends, providing relevant market insights to support strategic decisions. Maintain a professional image and actively contribute to strengthening the division s brand presence.Ensure timely and accurate updates of the CRM system, including records of visits, correspondence, quotations, and orders.</p><p><strong>Desired Candidate Profile</strong></p><h2>To succeed, you will need</h2> <p>Knowledge - Proven and minimum of three (3) years of experience in industrial sales function. - Candidate must be fluent in spoken &amp; written English and Arabic. - Adequate knowledge of using MS office tools is required. - Good technical and engineering background. - Familiarity and experience to deal and negotiate commercial terms and conditions. Educational requirements Graduate in Mechanical Engineering or related field. Personality requirements - Strong interpersonal and communication skills - Good teamwork spirit, self-motivated and energetic. - Eager to learn &amp; adapt- Result oriented - Able to work with sales and budget forecasts - Meet stiff targets, deadlines &amp; work under pressure.</p>

<h3 >About the Refrigeration Engineer Role</h3> <p >Al Toga is seeking a dedicated <strong >Refrigeration Engineer</strong> to join our team in Dammam, Eastern Region. This full-time position involves the comprehensive management and maintenance of our critical refrigeration infrastructure, ensuring optimal performance and reliability across our facilities.</p> <h3 >Role Purpose</h3> <p >The Refrigeration Engineer plays a vital role in maintaining product quality, upholding food safety standards, and ensuring uninterrupted cold chain operations. This includes overseeing industrial chillers, cold store rooms, refrigerators, and blast freezers within our production and storage environments.</p> <h3 >Key Responsibilities</h3> <ul > <li >Operate, maintain, and troubleshoot industrial chillers, freezer rooms, and blast freezer systems.</li> <li >Perform preventive and corrective maintenance on refrigeration units, compressors, condensers, evaporators, and control systems.</li> <li >Monitor and maintain optimal temperature and humidity levels across all cold storage areas to preserve product quality.</li> <li >Diagnose and repair mechanical, electrical, and refrigerant-related faults efficiently.</li> <li >Manage refrigerant handling, recovery, and recharging in strict accordance with safety and environmental regulations.</li> <li >Conduct routine inspections and maintain accurate maintenance logs and reports for all refrigeration equipment.</li> <li >Coordinate effectively with production and warehouse teams to schedule maintenance activities with minimal operational disruption.</li> <li >Manage relationships with external service providers and spare parts suppliers to ensure timely support.</li> <li >Respond promptly to emergency breakdowns and implement solutions to minimize downtime.</li> </ul> <h3 >Required Experience</h3> <p >Candidates for this position should possess <strong >2 to 5 years</strong> of professional experience as a Refrigeration Engineer or in a similar capacity involving the maintenance and management of industrial refrigeration systems.</p> <h3 >Work Environment and Location</h3> <p >This is a full-time position based in <strong >Dammam, Eastern Region</strong>, Saudi Arabia. The role requires on-site presence to manage and maintain refrigeration infrastructure across our production and storage facilities.</p> <h3 >Application Process</h3> <p >Interested candidates are invited to apply. Salary details will be discussed during the interview process.</p>

ACWA Operations:At Acwa Operations, we make essential services dependable and efficient for the millions of people who rely on them every day. Formerly NOMAC (The First National Operations & Maintenance Company), we are the operations and maintenance arm of Acwa, focused on keeping power generation and water desalination assets running safely, reliably and cost-effectively across their full lifecycle. Since 2005, we have partnered with clients across the Middle East, Africa and Asia to support complex infrastructure that powers communities and sustains economies. As part of Acwa, we bring deep technical knowledge, strong operational systems and a culture built on performance and accountability. Our work covers everything from commissioning and asset management to preventive and corrective maintenance, technical support and continuous performance improvement. We know that reliability and cost discipline aren’t just technical goals, they determine whether people have light at night, water in their homes and industry can operate without interruption. By maximising asset availability, enhancing resilience and upholding the highest safety and quality standards, Acwa Operations contributes directly to Acwa’s mission to deliver sustainable, affordable energy and water solutions that advance people’s lives and strengthen communities worldwide.<br>Marafiq Red Sea Project:The Red Sea Utilities Multi-Utilities Project is a landmark greenfield initiative developed by ACWA Power in partnership with Red Sea Global, supporting Saudi Arabia’s premier tourism destination along the Red Sea coast. Under a 25-year Utilities Concession Agreement, ACWA Power is responsible for the development, construction, operation, and eventual transfer of a fully integrated, off-grid utilities infrastructure. The project includes a 340 MWac solar PV plant combined with one of the world’s largest captive-scale battery energy storage systems (1,000–1,200 MWh), enabling 24/7 clean energy supply. In addition to renewable power, the scope covers seawater desalination (up to 32,500 m³/day), wetlands-based sewage treatment (16,000 m³/day), district cooling (32,500 RT), and zero-landfill waste management (~11,775 t/year).<br>Reporting to:Operations Manager<br>Job Purpose:Lead the safe, efficient and reliable operation of power generation assets at RSP (PV/BESS, auxiliaries and integration to RO/DCP/STP interfaces), ensuring compliance with grid codes, OEM recommendations and NOMAC HSSE standards, to maximise availability and performance.<br>Key Accountabilities:Operations Management Oversee day-to-day generation operations including start-up, shutdown and load management across PV/BESS and balance-of-plant. Monitor alarms, trends and KPIs; coordinate response to deviations and abnormal events; implement corrective actions to prevent recurrence. Ensure adherence to dispatch instructions and grid requirements; coordinate with CCC/SCADA and Shift teams. Technical Governance:Own and continuously improve operating procedures, SOPs and LOTO; ensure robust PTW implementation. Support root cause analyses and lead implementation of corrective and preventive actions. Outage & Maintenance Interface:Coordinate with Maintenance and Performance teams for planned outages and emergent work to minimise downtime and production losses. Validate commissioning/return-to-service for power systems after maintenance HSSE & Compliance:Champion HSSE culture; ensure compliance with NOMAC/ACWA standards and RSG site rules; participate in audits and drills. People & Stakeholder Management:Guide Shift Engineers/Operators; provide on-the-job coaching and ensure skills are current; liaise with PGM, O&M and external stakeholders as required.<br>Communication & Working Relationships:Internal:PGM, Operations Supervisors, Maintenance (Electrical/Mechanical/I&C), Performance Assurance, HSE, Supply Chain, Finance. External:Grid operator, EPC/OEMs, RSG counterparts and contractors.<br>Minimum Qualifications:Bachelor’s Degree in Electrical/Mechanical/Power Engineering or equivalent8–10+ years in power generation operations with experience in PV/BESS or conventional generation and plant utilities; at least 3 years in a senior/lead role.<br>Skills:Strong knowledge of power plant systems (PV inverters, BESS, transformers, GIS/AIS switchgear, protection, auxiliaries). SCADA/CCR operations proficiency and incident response. Procedure authoring, RCA and continuous improvement. Knowledge of IMS/ISO 9001, 14001, 45001; PTW/LOTO. Leadership and stakeholder management.

<h3 >Role Overview</h3> <p >ArcelorMittal Tubular Products Al-Jubail is seeking an experienced <strong >Engineer Order Execution</strong> to join their team in Al Jubail, Eastern, Saudi Arabia. This full-time role is central to coordinating and managing the technical aspects of order execution, ensuring strict compliance with customer specifications and timely delivery of products.</p> <h3 >Position Summary</h3> <p >The Engineer Order Execution will work closely with various internal departments, including sales, supply chain/logistics, finance, and production, to facilitate seamless order processing. This position is critical for identifying and resolving technical issues or potential delays throughout the order execution lifecycle, contributing to overall operational efficiency and customer satisfaction.</p> <h3 >Key Responsibilities</h3> <ul > <li >Coordinate and manage all technical aspects related to order execution.</li> <li >Ensure that all orders adhere to customer specifications and contractual agreements.</li> <li >Monitor and track order progress to guarantee on-time delivery.</li> <li >Collaborate effectively with sales, supply chain/logistics, finance, and production teams for smooth order execution.</li> <li >Identify and resolve any technical issues or delays that may arise during the order execution process.</li> <li >Maintain accurate and current records for all orders and associated documentation.</li> <li >Provide regular reports on order status and performance metrics to the Order Execution Manager.</li> <li >Develop and implement strategies aimed at improving order execution processes.</li> <li >Deliver professional presentations and reports to clients and stakeholders.</li> <li >Ensure thorough organization and reliable follow-up on all order activities.</li> </ul> <h3 >Required Qualifications</h3> <ul > <li >Bachelor’s degree in Engineering, with a preference for mechanical, manufacturing, industrialization, petroleum, or metallurgy specializations.</li> <li >A minimum of <strong >10 years of experience</strong> in a relevant field.</li> </ul> <h3 >Essential Skills and Knowledge</h3> <ul > <li >Strong technical knowledge of Oil Country Tubular Goods (OCTG) products and solutions.</li> <li >Ability to clearly explain complex technical information to non-technical customers.</li> </ul> <h3 >Work Environment</h3> <p >This is a full-time position based in Al Jubail, Eastern, Saudi Arabia, within a dynamic team focused on ensuring efficient and compliant order execution for ArcelorMittal Tubular Products Al-Jubail.</p>

<p>In this role you will focus on business development; and sales of our Datacentre solutions. You will work closely with Delta Account Management sales teams to quote and win projects. You will actively develop relationships with our customers, key partners, and system integrators. You will facilitate partnerships, client sessions, and lead sales efforts ensuring appropriate experts are engaged, to deliver accurate proposals to our top customers. Main responsibilities and tasks Generate leads and build and nurture client relationships. Represent our company, with a comprehensive understanding of our offerings. Ability to build and maintain trusted relationships with C-Level executives (CXO). Understand customer requirements and deliver a consultative approach and solution-based selling. Ensure follow up on actions and activities. Be accountable for Data Centre Sales targets to our customers in Saudi. Develop proposals to customers with accurate solution leveraging Design &amp; SSE teams. Hire, train, motivate, and advise Data Centre Partners (System Integrators and Contractors). Achieve company objectives and revenue targets. Discover new growth areas. Promote Delta Data Centre solutions to customers and partners. Validate/prioritize engagement in high potential opportunities. Report on successes and areas needing improvements. Project work and areas of change Maintain an in-depth knowledge of Data Centre based solutions and customers business requirements to drive our offering in this area. Prioritize activities according to revenue generation and corporate strategy. Meet with potential clients and grow long-lasting relationships by understanding their needs.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in Engineering, preferably Electrical or Mechanical. 7+ years of experience in Data Center infrastructure, Power and/or Cooling solutions. 10+ years of experience in Business Development and Partner ecosystem development. Proven track record in complex, consultative sales. Strong network within the Saudi Data Center ecosystem. Strong technical understanding of Data Center infrastructure. Excellent communication and stakeholder management skills. Strong negotiation skills. Fluent in English and Arabic</p>

<ul><li><p>Lead the end-to-end execution of demolition, dismantling, decommissioning, and associated civil works projects from mobilization through final handover.</p></li><li><p>Develop and implement project execution strategies, schedules, resource plans, and budgets to achieve project objectives.</p></li><li><p>Direct and manage all site operations, ensuring activities are executed safely, efficiently, and in accordance with project specifications, quality standards, and company procedures.</p></li><li><p>Coordinate multidisciplinary teams, including engineering, planning, HSE, QA/QC, procurement, plant, and subcontractors, to ensure seamless project delivery.</p></li><li><p>Monitor project progress, identify risks and constraints, and implement timely corrective actions to maintain project schedules and commercial targets.</p></li><li><p>Manage project resources, including manpower, equipment, subcontractors, and materials, to maximize productivity and cost efficiency.</p></li><li><p>Ensure compliance with all contractual obligations, statutory regulations, environmental requirements, and client specifications.</p></li><li><p>Lead client, consultant, and stakeholder meetings, maintaining strong relationships and ensuring effective communication throughout the project lifecycle.</p></li><li><p>Oversee project commercial performance, including cost control, change management, claims, variations, and contract administration, while protecting the company's contractual and financial interests.</p></li><li><p>Review and approve engineering methodologies, demolition plans, lifting studies, dismantling sequences, and technical documentation prior to execution.</p></li><li><p>Ensure effective coordination between head office and site teams to achieve project milestones and successful project closure.</p></li><li><p>Drive a strong culture of safety, quality, operational excellence, and continuous improvement across all project activities.</p></li><li><p>Prepare and present periodic project progress, commercial, risk, and performance reports to senior management.</p></li><li><p>Mentor and develop project teams, ensuring high performance, accountability, and succession planning within the organization.</p></li><li><p>Ensure timely project completion, client satisfaction, successful handover, and close-out of all contractual, commercial, and technical deliverables.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Engineering (Mechanical, Electrical, or related) & Law.</p></li><li><p>7–12 years of experience in technical project management and claim management within EPC, construction, oil & gas, or infrastructure projects</p></li><li><p>Proficiency in Primavera P6, MS Project, and project control tools.</p></li><li><p>Excellent negotiation, communication, and documentation skills.</p></li><li><p>Strong analytical and problem-solving abilities.</p></li><li><p>Ability to lead teams and manage multiple priorities</p></li></ul>

<h3 >About AREEB and the Role</h3> <p >AREEB is seeking a dedicated and professional <strong >Driver</strong> to join their team in <strong >Riyadh</strong>. This <strong >full-time</strong> position is crucial for ensuring safe and efficient transportation services for the company's operations.</p> <h3 >Role Purpose</h3> <p >The Driver will be responsible for the safe transportation of passengers, staff, or goods, ensuring strict compliance with all traffic regulations and company policies. This role involves maintaining the assigned vehicle in excellent condition, planning efficient routes, and providing timely and courteous service to support various company needs.</p> <h3 >Key Responsibilities</h3> <ul > <li >Safely operate company vehicles to transport employees, clients, or materials as required.</li> <li >Adhere to assigned schedules and ensure timely arrivals and deliveries.</li> <li >Plan routes efficiently, taking into account traffic conditions and road closures.</li> <li >Conduct daily vehicle inspections and promptly report any mechanical issues or maintenance requirements.</li> <li >Ensure the vehicle remains clean, presentable, and properly maintained at all times.</li> <li >Maintain accurate records of trips, mileage, fuel consumption, and vehicle maintenance activities.</li> <li >Comply with all Saudi traffic laws, company policies, and safety regulations.</li> <li >Assist with loading and unloading materials when necessary.</li> <li >Handle confidential information and company assets with the utmost professionalism.</li> <li >Provide support for other administrative or operational tasks as assigned.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >High school diploma or equivalent is preferred.</li> <li >Possession of a valid Saudi driving license, with the appropriate category for the assigned vehicle.</li> <li >A minimum of <strong >2 to 5 years of driving experience</strong> in Saudi Arabia.</li> </ul> <h3 >Required Skills and Knowledge</h3> <ul > <li >Good knowledge of Saudi roads, routes, and traffic regulations.</li> <li >A clean driving record with no major traffic violations.</li> <li >Basic understanding of vehicle maintenance.</li> <li >Proficiency in using GPS and navigation applications.</li> <li >Basic communication skills in Arabic are required; English language skills are considered an advantage.</li> </ul> <h3 >Application Information</h3> <p >Qualified candidates are invited to apply for this full-time Driver position in Riyadh. The salary for this role will be discussed during the interview process.</p>

JOB SUMMARY: The Telehandler Operator is responsible for the safe and efficient operation of a telescopic handler to lift, transport, and place materials, equipment, and loads across the worksite, including rough or uneven terrain. The role requires precise load handling at height and extended reach, strict adherence to lift plans and load charts, and full compliance with site HSE and lifting operation procedures<br>Key Responsibilities Operate the telehandler safely to lift, carry, and place materials (pallets, pipes, equipment, containers, and other loads) at height and extended reach, in accordance with manufacturer specifications and site lift procedures. Conduct pre-use inspections of the telehandler (visual, mechanical, and functional checks) and report defects or unsafe conditions immediately; complete daily inspection checklists/logbooks. Read and apply load charts correctly, calculating safe working load relative to boom angle, extension, and radius before every lift. Assess ground conditions, terrain, and stability requirements before positioning the machine, including use of outriggers/stabilizers where fitted. Coordinate with banksmen/signalers, riggers, and ground personnel using standard hand signals or radio communication during lifting operations. Follow approved lift plans for non-routine or complex lifts, and escalate to supervision when a lift falls outside standard operating limits. Maintain safe exclusion zones and ensure no personnel are positioned under a suspended or raised load. Use only certified attachments (forks, buckets, jibs, man-baskets) appropriate to the task, and never exceed rated capacity. Carry out basic operator-level maintenance (fluid checks, tire condition, greasing) and report equipment faults for maintenance follow-up. Maintain accurate records of operating hours, inspections, and incidents as required by site procedures. Comply with all HSE policies, PPE requirements, and permit-to-work procedures relevant to lifting and material handling operations. Participate in toolbox talks, safety briefings, and training relevant to telehandler operations.<br>Certifications and Requirements Forklift Aramco Certification Operator Certification Program Saudi Aramco/Contractor Medical Examination H2S & SCBA Level IIFirst Aid & CPR Level IIFire Fighting Level IIHAZCOMMan-basket / personnel lifting certification, if the role requires use of a man-basket attachment. Secondary/high school education or equivalent; technical/vocational training in plant operations is an <br>Experience Minimum 5 years of demonstrated experience operating telehandlers in a construction, industrial, or rig-site environment. Experience operating on rough or unpaved terrain and in outdoor/site conditions is required. Experience working alongside riggers/banksmen and following formal lift plans is preferred.<br>Skills & Competencies Strong spatial awareness and precision in load placement at height and extended reach. Sound understanding of load charts, stability principles, and safe working load calculations. High attention to safety, situational awareness, and risk identification. Clear communication skills for coordination with ground crew and signalers. Ability to remain calm and methodical under time or site pressure. Basic mechanical aptitude for pre-use checks and fault reporting.<br><br>Working Conditions Primarily outdoor, site-based work; exposure to heat, dust, and varying weather conditions. Operating on uneven, rough, or unfinished terrain typical of construction or rig sites. May require shift work, extended hours, or rotational schedules depending on project needs. Use of full PPE at all times as per site HSE requirements.<br><br>Working Conditions Primarily outdoor, site-based work; exposure to heat, dust, and varying weather conditions. Operating on uneven, rough, or unfinished terrain typical of construction or rig sites. May require shift work, extended hours, or rotational schedules depending on project needs. Use of full PPE at all times as per site HSE requirements. Physical Requirements Ability to safely mount/dismount the operator cab and work in a seated position for extended periods. Good vision (with correction if required) and depth perception for accurate load handling. Physically fit to pass site-required medical fitness assessment for plant operators. Key Working Relationships Internal: Site Supervisor, HSE Officer, Riggers/Banksmen, Maintenance/Workshop team, other plant operators. External: Client site representatives, third-party inspection/certification bodies, equipment rental/maintenance vendors.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Design Fire Protection Engineer</b> - Dammam, Saudi Arabia</p><p><i>Professional Job Description</i></p><p><b>Job Summary</b></p><p>We are seeking a qualified and detail-oriented Senior &nbsp;Fire Protection Engineer to join our team in Dammam, Saudi Arabia. The ideal candidate will have a strong background in fire protection design for industrial facilities and commercial projects.</p><p>This role is primarily focused on the design, coordination, and review of fire protection systems, ensuring compliance with applicable codes, standards, and authority requirements. Preference will be given to candidates with hands-on experience in HCIS processes and requirements and Saudi Civil Defense approval projects.</p><p>The successful candidate will work closely with architects, MEP engineers, consultants, and project teams to develop efficient, code-compliant fire protection design solutions for a wide range of facilities.</p><p><b>Key Responsibilities</b></p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Design and develop fire protection systems for industrial facilities and commercial projects, including fire sprinkler systems, fire alarm systems, fire suppression systems, standpipe and hose reel systems, and clean agent and foam systems where applicable.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Prepare fire protection design calculations, technical reports, specifications, and detailed design and shop drawings.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Coordinate fire protection design with architectural, structural, mechanical, electrical, and plumbing disciplines to ensure proper integration into the overall project.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Review project requirements and ensure compliance with relevant local and international fire and life safety codes and standards.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Support the preparation and submission of documents for HCIS and Civil Defense review and approval.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Ensure designs meet HCIS regulations, Saudi Building Code requirements, Civil Defense requirements, and NFPA standards.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Participate in design review meetings with clients, consultants, and internal teams.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Provide technical support during project execution, including reviewing material submittals, RFIs, method statements, and contractor shop drawings.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Conduct site visits when required to verify installation compliance with approved drawings and design intent.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Assist in testing, commissioning, and final inspection activities related to fire protection systems.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Support authority inspections, audits, and approval processes with relevant stakeholders.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Stay current with developments in fire protection engineering, code updates, and industry best practices.</p><p><b>Preferred Candidate Profile</b></p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Bachelor's degree in Fire Protection Engineering, Mechanical Engineering.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;5-10 years of relevant experience in fire protection system design for industrial facilities and commercial projects.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Strong experience in the design and coordination of fire protection systems, not only installation or maintenance.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Experience in projects requiring HCIS approval and strong familiarity with HCIS procedures and requirements.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Experience working on Civil Defense submission and approval projects in Saudi Arabia.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Good knowledge of NFPA standards, Saudi Building Code, HCIS regulations, and applicable local authority requirements.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Proficiency in AutoCAD, Revit, and other relevant fire protection design software.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Ability to prepare design drawings, hydraulic calculations, material specifications, and technical documentation.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Strong coordination skills with multidisciplinary engineering and construction teams.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Good problem-solving, analytical, and technical decision-making skills.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Effective communication and interpersonal skills.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Strong attention to detail and ability to manage multiple projects and deadlines.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;NFPA Certified Fire Protection Specialist (CFPS) certification is preferred.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Design Fire Protection Engineer</b> - Dammam, Saudi Arabia</p><p><i>Professional Job Description</i></p><p><b>Job Summary</b></p><p>We are seeking a qualified and detail-oriented Senior &nbsp;Fire Protection Engineer to join our team in Dammam, Saudi Arabia. The ideal candidate will have a strong background in fire protection design for industrial facilities and commercial projects.</p><p>This role is primarily focused on the design, coordination, and review of fire protection systems, ensuring compliance with applicable codes, standards, and authority requirements. Preference will be given to candidates with hands-on experience in HCIS processes and requirements and Saudi Civil Defense approval projects.</p><p>The successful candidate will work closely with architects, MEP engineers, consultants, and project teams to develop efficient, code-compliant fire protection design solutions for a wide range of facilities.</p><p><b>Key Responsibilities</b></p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Design and develop fire protection systems for industrial facilities and commercial projects, including fire sprinkler systems, fire alarm systems, fire suppression systems, standpipe and hose reel systems, and clean agent and foam systems where applicable.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Prepare fire protection design calculations, technical reports, specifications, and detailed design and shop drawings.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Coordinate fire protection design with architectural, structural, mechanical, electrical, and plumbing disciplines to ensure proper integration into the overall project.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Review project requirements and ensure compliance with relevant local and international fire and life safety codes and standards.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Support the preparation and submission of documents for HCIS and Civil Defense review and approval.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Ensure designs meet HCIS regulations, Saudi Building Code requirements, Civil Defense requirements, and NFPA standards.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Participate in design review meetings with clients, consultants, and internal teams.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Provide technical support during project execution, including reviewing material submittals, RFIs, method statements, and contractor shop drawings.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Conduct site visits when required to verify installation compliance with approved drawings and design intent.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Assist in testing, commissioning, and final inspection activities related to fire protection systems.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Support authority inspections, audits, and approval processes with relevant stakeholders.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Stay current with developments in fire protection engineering, code updates, and industry best practices.</p><p><b>Preferred Candidate Profile</b></p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Bachelor's degree in Fire Protection Engineering, Mechanical Engineering.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;5-10 years of relevant experience in fire protection system design for industrial facilities and commercial projects.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Strong experience in the design and coordination of fire protection systems, not only installation or maintenance.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Experience in projects requiring HCIS approval and strong familiarity with HCIS procedures and requirements.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Experience working on Civil Defense submission and approval projects in Saudi Arabia.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Good knowledge of NFPA standards, Saudi Building Code, HCIS regulations, and applicable local authority requirements.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Proficiency in AutoCAD, Revit, and other relevant fire protection design software.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Ability to prepare design drawings, hydraulic calculations, material specifications, and technical documentation.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Strong coordination skills with multidisciplinary engineering and construction teams.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Good problem-solving, analytical, and technical decision-making skills.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Effective communication and interpersonal skills.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Strong attention to detail and ability to manage multiple projects and deadlines.</p><p>●&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;NFPA Certified Fire Protection Specialist (CFPS) certification is preferred.</p></div>

We're Hiring | QA/QC Engineer – Steel Structure Fabrication & Erection<br>GST International is seeking an experienced QA/QC Engineer with direct hands-on experience in Steel Structure Fabrication, PEB Buildings, Structural Steel, Welding Inspection, and Site Erection Projects to join our team in Saudi Arabia.<br>Important: This position is strictly for candidates with a minimum of 3 - 5 years of direct QA/QC experience in Steel Structure Fabrication and Erection Projects. Candidates without direct Structural Steel or PEB experience will not be considered.<br>???? Position: QA/QC Engineer – Steel Structure Fabrication & Erection???? Location: Saudi Arabia???? Employment Type: Full-Time<br>???? Key Responsibilities:<br>* Implement and monitor QA/QC procedures for steel structure fabrication and erection projects.* Conduct inspections of raw materials, structural steel fabrication, fit-up, welding, surface preparation, painting, transportation, and site erection activities.* Ensure compliance with approved shop drawings, project specifications, ITPs, method statements, WPS, PQR, WPQ, and applicable international codes.* Inspect welding activities and verify compliance with approved welding procedures and project requirements.* Review and maintain material certificates, heat numbers, material traceability, welding records, and inspection documentation.* Coordinate and monitor NDT activities, including VT, MT, PT, UT, and RT, as required by project specifications.* Prepare and submit Inspection Requests (IR), Material Inspection Requests (MIR), inspection reports, test reports, and other QA/QC documentation.* Identify, report, and follow up on Non-Conformance Reports (NCRs) and corrective actions.* Conduct inspections at fabrication shops and construction sites.* Monitor site erection activities, including alignment, bolting, welding, connection details, and installation of structural steel members.* Coordinate with clients, consultants, project managers, engineers, fabrication teams, and site teams for inspections and approvals.* Maintain complete project quality records and support internal and external quality audits.<br>???? Mandatory Qualifications & Experience:<br>✅ Bachelor's Degree in Civil, Mechanical, Structural Engineering, or a related engineering discipline.✅ Minimum 3 years of direct QA/QC experience in Steel Structure Fabrication and Erection Projects.✅ Proven experience in Structural Steel and PEB (Pre-Engineered Building) Projects.✅ Hands-on experience in fabrication shop inspection and site erection inspection.✅ Strong experience in welding inspection, material inspection, NDT coordination, and quality documentation.✅ Practical knowledge of WPS, PQR, WPQ, ITPs, Method Statements, NCRs, MIRs, and IRs.✅ Experience with applicable international codes and standards, including AWS D1.1 and AISC.✅ Previous Saudi Arabia or GCC experience will be an advantage.<br>???? Required Technical Skills:<br>* Steel Structure Fabrication QA/QC* Structural Steel Inspection* PEB Building Inspection* Welding Inspection* Fit-Up Inspection* Visual Inspection (VT)* NDT Coordination: MT, PT, UT, and RT* WPS, PQR & WPQ* ITPs and Method Statements* Material Certificates & Traceability* NCR, MIR & IR Documentation* Surface Preparation and Painting Inspection* Steel Erection and Installation Inspection* AWS D1.1 and AISC Standards<br>???? Preferred Candidate Profile:<br>Candidates currently working or having previous experience in Steel Structure Fabrication, PEB, Structural Steel, and Steel Erection Companies will be given priority.<br>❌ Candidates with only experience in the following areas, without direct Steel Structure or PEB experience, should not apply:<br>* General Civil Construction* Residential or Commercial Building Construction* Roads and Infrastructure* MEP Projects* General Mechanical Projects* General Oil & Gas QA/QC<br>???? Why Join GST International?<br>Be part of an international engineering and contracting company operating across Saudi Arabia, UAE, Pakistan, and the UK. Join a professional environment focused on growth, innovation, and career development.<br>???? Apply Now: jobs@gstsaudi.com???? WhatsApp: +966 57 452 6903<br>#GSTInternational #Now Hiring #QAQC #QAQCEngineer #Steel Structure #Structural Steel #Steel Fabrication #PEB #Welding Inspection #Steel Erection #AWSD11 #AISC #NDT #Quality Control #Quality Assurance #Saudi Arabia Jobs #Construction Jobs #Engineering Jobs #GCCJobs #Apply Now #Join Our Team

<p>Minimum of 7 to 10 years of experience in Design and Engineering of GIS and AIS Substations projects Should be working as Electrical Engineer with experience in Primary Engineering Design for High Voltage (HV) and Extra High Voltage (EHV) substations ranging from 380KV (Gulf experience is mandatory). The candidate will be responsible for creating engineering deliverables related to physical Overall Equipment Layout (OEL), equipment sizing, Earth mat grounding calculation and layout, and busbar sizing, DSLP calculation and layout in accordance with project requirements, industry standards, and client specifications. (Saudi experience is preferred) </p><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Prepare primary design drawings including:</p></li><li><p>Overall SLD and PSLD.</p></li><li><p>Single Line diagram LVAC & DC Distribution System.</p></li><li><p>General Overall Equipment Layout (OEL) arrangement for AIS and GIS Substation.</p></li><li><p>ERT layout.</p></li><li><p>Indoor and Outdoor Equipment layout plans and Sectional views.</p></li><li><p>Equipment foundation layout.</p></li><li><p>All type of Cable sizing and routing layout diagrams</p></li><li><p>Earthing mat sizing calculation and layout with BOM details.</p></li><li><p>DSLP calculation for indoor and outdoor with layout and BOM.</p></li><li><p>Battery bank, Charger and UPS sizing calculation.</p></li><li><p>Busbar calculations and drawings.</p></li><li><p>Cable schedule and termination schedule with BOM of Glands and lugs.</p></li><li><p>Short circuit force calculation and stringing chart as per IEC standard,</p></li><li><p>CT/VT Sizing Calculation.</p></li><li><p>Indoor, Outdoor and Road Lighting calculation and circuit diagram & layout.</p></li><li><p>HV equipment connection and interconnection details, (EKD) erection Key diagram.</p></li><li><p>Conduct equipment sizing and selection (circuit breakers, isolators, CTs, PTs, surge arresters, DG set, Auxiliary Transformer, NGR, etc.)</p></li><li><p>Perform clearance studies (electrical & mechanical) as per IS/IEC/IEEE standards.</p></li><li><p>Develop and review substation grounding (earthing) design calculation and layout.</p></li><li><p>Support the preparation of bill of quantities (BOQ) and material specifications</p></li><li><p>Ensure designs are compliant with relevant standards (IEC, IEEE, IS, CBIP, etc.)</p></li><li><p>Coordinate with secondary design, civil, Structural, Architecture, BIM, Mechanical, Fire protection, Firefighting, CCTV surveillance and protection teams for interface clarity.</p></li><li><p>Support proposal and estimation teams during bidding stages with design input</p></li><li><p>Participate in design reviews, client meetings, and technical discussions.</p></li></ul>

<h3 >About Hortus Arabia</h3> <p >Hortus Arabia specializes in the maintenance and servicing of heavy equipment and vehicles, delivering reliable and efficient solutions to industrial and commercial clients. The company prioritizes safety and operational continuity, assisting businesses in minimizing downtime and sustaining productivity. Hortus Arabia supports various sectors that rely on well-maintained fleets and machinery, with team members directly contributing to safe, uninterrupted operations and customer satisfaction across the region.</p> <h3 >The Role of Delivery Driver</h3> <p >Hortus Arabia is seeking a <strong >Delivery Driver</strong> to join its team in Dammam, Eastern, Saudi Arabia. This is a full-time, on-site position. The primary responsibility of this role is the safe transportation of parts, equipment, and materials to customer locations and company sites, adhering strictly to planned routes and delivery schedules. Candidates should have 0-1 years of relevant experience.</p> <h3 >Key Responsibilities</h3> <ul > <li >Safely transport parts, equipment, and materials to designated customer locations and company sites.</li> <li >Follow planned routes and delivery schedules efficiently.</li> <li >Load and unload items carefully and securely.</li> <li >Verify all delivery documentation for accuracy.</li> <li >Maintain the assigned vehicle in a clean and roadworthy condition.</li> <li >Report any mechanical issues or delivery delays promptly.</li> <li >Interact professionally with customers and internal teams, ensuring clear communication and accurate deliveries.</li> <li >Adhere to all company safety policies and local traffic regulations.</li> <li >Assist with basic warehouse duties, including organizing stock and supporting equipment movement as required.</li> </ul> <h3 >Required Experience</h3> <p >Candidates for the Delivery Driver position should possess <strong >0-1 years of experience</strong> in a similar role. This foundational experience will support effective execution of daily delivery operations and adherence to company standards.</p> <h3 >Work Environment</h3> <p >This is a <strong >full-time, on-site role</strong> based in Dammam, Eastern, Saudi Arabia. The Delivery Driver will operate primarily outdoors and on various road networks, interacting with both internal teams and external clients.</p> <h3 >Application Process</h3> <p >Interested candidates who meet the specified requirements are encouraged to apply. Hortus Arabia values dedication to safety and operational excellence in all team members.</p>

We Are Hiring: Fit-Out & MEP Project Manager???? Location: Makkah, Saudi Arabia????️ Industry: Interior Fit-Out, Hospitality and MEP Works We are seeking an experienced and highly capable Fit-Out & MEP Project Manager to lead and manage a hospitality fit-out project in Makkah from initiation through final completion and handover. The successful candidate will be fully responsible for the end-to-end delivery of the project, including planning, mobilization, execution, coordination, quality control, commercial monitoring, client communication, testing, commissioning and final handover. Key Responsibilities• Manage the entire project lifecycle from initial planning and site mobilization through execution, completion and handover.• Develop and maintain detailed project schedules, work plans, manpower requirements, procurement schedules and material delivery plans.• Lead and coordinate all architectural fit-out, civil, mechanical, electrical, plumbing and related specialist works.• Ensure effective coordination between architectural finishes and MEP services to prevent clashes, delays and rework.• Manage hotel renovation and fit-out activities, including guest rooms, corridors, public areas, back-of-house areas and service facilities.• Review project drawings, shop drawings, specifications, BOQs, method statements, material submittals and technical documents.• Coordinate with the client, consultant, hotel management, subcontractors, suppliers and internal departments.• Monitor site progress against the approved baseline schedule and take corrective action when delays or risks are identified.• Manage subcontractors and site teams, ensuring clear work allocation, productivity monitoring and timely completion of assigned activities.• Ensure that all works comply with approved drawings, specifications, contractual requirements, applicable codes and project quality standards.• Oversee material approvals, procurement requirements, deliveries, inspections and proper storage at the project site.• Identify technical, operational and commercial risks and implement appropriate mitigation and recovery plans.• Monitor project costs, variations, change orders, claims, subcontractor performance and resource utilization.• Lead regular progress meetings and prepare accurate daily, weekly and monthly project reports.• Ensure compliance with health, safety and environmental requirements throughout all project activities.• Coordinate inspections, snagging, testing, commissioning, authority approvals and close-out documentation.• Ensure the timely submission of as-built drawings, operation and maintenance manuals, warranties, testing records and handover documents.• Deliver the project within the approved scope, schedule, budget, quality and safety requirements. Qualifications and Experience• Bachelor’s degree in Civil Engineering, Architecture, Construction Management or a related engineering discipline.• Candidates with a Mechanical or Electrical Engineering background may also be considered, provided they have extensive experience managing complete fit-out and MEP projects.• Minimum of 10 years of overall experience in construction, interior fit-out or project delivery.• At least 6 years of proven experience in a Project Manager position.• Strong experience in hotel, hospitality, luxury residential or high-end commercial fit-out projects is highly preferred.• Demonstrated ability to manage projects from mobilization through testing, commissioning and final handover.• Strong technical understanding of architectural finishes, joinery, ceilings, flooring, wall finishes, partitions, waterproofing and associated MEP systems.• Excellent knowledge of project planning, procurement, subcontractor management, cost control, quality management and site operations.• Ability to read, review and coordinate architectural, structural and MEP drawings.• Strong leadership, communication, negotiation, problem-solving and decision-making skills.• Proficiency in project management and reporting tools such as Microsoft Project, Primavera P6, Microsoft Office and related systems is preferred.• Previous work experience in Saudi Arabia and familiarity with local project requirements are highly preferred. Application Requirements Interested candidates are required to submit an updated CV only, clearly highlighting their relevant experience in project management, interior fit-out, MEP coordination and hospitality projects. Candidates who are contacted and shortlisted for an interview will subsequently be required to provide a project portfolio and supporting documents. These may include details of previously completed projects, project values, scope of work, individual responsibilities, employment certificates and any other relevant evidence of experience. The project portfolio and supporting documents are not required at the initial application stage and will only be requested from shortlisted candidates during the recruitment process.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Engineering Supervisor&nbsp;</strong></p><br><br> <br> <p>The Company</p><br><br> <p>Founded in 1977, Almarai Company is the world’s largest vertically integrated dairy company and the largest food and beverage manufacturing and distribution company in MENA. Headquartered in Riyadh, &nbsp;Almarai Company is ranked as the number one FMCG Brand in the MENA region and the market leader in all its categories across GCC, Egypt, and Jordan.Over five decades of sustainable growth, Almarai has consistently provided nutritious and healthy products to consumers of all ages, driven by its core principle: “Quality you can trust.” Almarai has expanded its product range to include, in addition to dairy products, juices and beverages, baked goods, poultry, infant formula, dates, fish and seafood, and bottled water, under more than 20 brands such as Almarai, L’usine, 7DAYS, ALYOUM, Nuralac, Farm’s Select, Ice Leaf, Almira, Seama, Oska, IVAL, Almara Pro, Premier Chef, Bakemart, and others.Almarai currently employs over 43,000 Quality Makers, across the GCC, Egypt &amp; Jordan. In 2025, Almarai reported net income of SAR 2.4 billion on sales of SAR 22 billion.</p><br><br> <br> <p>The Role / Opportunity&nbsp;</p><br><br> <p>To plan, organize and manage a self - directing multi skilled team to provide engineering/maintenance services to meet internal customer requirement, ensure that allprocess engineering operation and services meet the management performance requirements. And ensure that all operations activities meet the defined safety and Quality standards</p><br><br> <br> <p>The candidate must meet the following criteria to be shortlisted:</p><br><br> <br> <ul> <li>Bachelor's in Electrical / Mechanical&nbsp;Engineering/Automation.</li> <li>4 Years' experience in a similar role in a large process industry.&nbsp;Good knowledge of operation and maintenance of advanced/automated meat process equipment's.</li> <li>Good knowledge of operation and maintenance of utility equipment for Steam, Refrigeration, Air, Water, Electrical Distribution, Gear motors, Vacuum Pumps.&nbsp;<br>&nbsp;</li> </ul> <p>Almarai offers a competitive package, generous leave, medical coverage, discretionary bonus, training, and development etc.</p><br><br> <p>This is a great opportunity to join a successful and expanding global business, offering an excellent remuneration and benefits package.</p><br><br> <br> <br> &nbsp; <br> <br> <br> <br> <br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 2+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

We're Hiring | QA/QC Engineer – Steel Structure Fabrication & Erection ????<br>GST International is seeking an experienced QA/QC Engineer with direct hands-on experience in Steel Structure Fabrication, PEB Buildings, Structural Steel, Welding Inspection, and Site Erection Projects to join our team in Saudi Arabia.<br>⚠️ Important: This position is strictly for candidates with a minimum of 3 - 5 years of direct QA/QC experience in Steel Structure Fabrication and Erection Projects. Candidates without direct Structural Steel or PEB experience will not be considered.<br>???? Position: QA/QC Engineer – Steel Structure Fabrication & Erection???? Location: Saudi Arabia???? Employment Type: Full-Time<br>???? Key Responsibilities:<br>* Implement and monitor QA/QC procedures for steel structure fabrication and erection projects.* Conduct inspections of raw materials, structural steel fabrication, fit-up, welding, surface preparation, painting, transportation, and site erection activities.* Ensure compliance with approved shop drawings, project specifications, ITPs, method statements, WPS, PQR, WPQ, and applicable international codes.* Inspect welding activities and verify compliance with approved welding procedures and project requirements.* Review and maintain material certificates, heat numbers, material traceability, welding records, and inspection documentation.* Coordinate and monitor NDT activities, including VT, MT, PT, UT, and RT, as required by project specifications.* Prepare and submit Inspection Requests (IR), Material Inspection Requests (MIR), inspection reports, test reports, and other QA/QC documentation.* Identify, report, and follow up on Non-Conformance Reports (NCRs) and corrective actions.* Conduct inspections at fabrication shops and construction sites.* Monitor site erection activities, including alignment, bolting, welding, connection details, and installation of structural steel members.* Coordinate with clients, consultants, project managers, engineers, fabrication teams, and site teams for inspections and approvals.* Maintain complete project quality records and support internal and external quality audits.<br>???? Mandatory Qualifications & Experience:<br>✅ Bachelor's Degree in Civil, Mechanical, Structural Engineering, or a related engineering discipline.✅ Minimum 3 years of direct QA/QC experience in Steel Structure Fabrication and Erection Projects.✅ Proven experience in Structural Steel and PEB (Pre-Engineered Building) Projects.✅ Hands-on experience in fabrication shop inspection and site erection inspection.✅ Strong experience in welding inspection, material inspection, NDT coordination, and quality documentation.✅ Practical knowledge of WPS, PQR, WPQ, ITPs, Method Statements, NCRs, MIRs, and IRs.✅ Experience with applicable international codes and standards, including AWS D1.1 and AISC.✅ Previous Saudi Arabia or GCC experience will be an advantage.<br>???? Required Technical Skills:<br>* Steel Structure Fabrication QA/QC* Structural Steel Inspection* PEB Building Inspection* Welding Inspection* Fit-Up Inspection* Visual Inspection (VT)* NDT Coordination: MT, PT, UT, and RT* WPS, PQR & WPQ* ITPs and Method Statements* Material Certificates & Traceability* NCR, MIR & IR Documentation* Surface Preparation and Painting Inspection* Steel Erection and Installation Inspection* AWS D1.1 and AISC Standards<br>???? Preferred Candidate Profile:<br>Candidates currently working or having previous experience in Steel Structure Fabrication, PEB, Structural Steel, and Steel Erection Companies will be given priority.<br>❌ Candidates with only experience in the following areas, without direct Steel Structure or PEB experience, should not apply:<br>* General Civil Construction* Residential or Commercial Building Construction* Roads and Infrastructure* MEP Projects* General Mechanical Projects* General Oil & Gas QA/QC<br>???? Why Join GST International?<br>Be part of an international engineering and contracting company operating across Saudi Arabia, UAE, Pakistan, and the UK. Join a professional environment focused on growth, innovation, and career development.<br>???? Apply Now: jobs@gstsaudi.com???? WhatsApp: +966 57 452 6903<br>#GSTInternational #Now Hiring #QAQC #QAQCEngineer #Steel Structure #Structural Steel #Steel Fabrication #PEB #Welding Inspection #Steel Erection #AWSD11 #AISC #NDT #Quality Control #Quality Assurance #Saudi Arabia Jobs #Construction Jobs #Engineering Jobs #GCCJobs #Apply Now #Join Our Team