Residential supervisor Jobs

<p><strong>Job Title</strong> -Field Operator Transmission</p><p><strong>Project / Location</strong> - NEOM Green Hydrogen Project Saudi Arabia</p><p><strong>Department</strong> -Operations &amp; Maintenance</p><p><strong>Reports To</strong> -Operations Supervisor / Shift Supervisor</p><p><strong>Job Purpose</strong></p><p>Responsible for the safe and reliable operation, inspection, monitoring, and basic maintenance of transmission systems and associated equipment, ensuring continuous power transmission in accordance with approved operating procedures, HSE requirements, and applicable grid standards.</p><p><strong>Key Duties &amp; Responsibilities</strong></p><p><strong>Field Operations</strong>: Operate, monitor, and inspect transmission equipment, substations, transformers, switchgear, circuit breakers, isolators, protection systems, and associated electrical assets.</p><p><strong>System Monitoring</strong>: Conduct routine field inspections, identify abnormal conditions, and report equipment faults, alarms, leaks, overheating, or other operational issues.</p><p><strong>Switching Operations</strong>: Perform authorized switching, isolation, and restoration activities in accordance with approved procedures, permits, and switching programs.</p><p><strong>Maintenance Support</strong>: Support preventive and corrective maintenance activities, including equipment isolation, testing, inspection, and safe restoration to service.</p><p><strong>HSE &amp; Compliance</strong>: Ensure all activities comply with company HSE policies, electrical safety procedures, Permit to Work (PTW) requirements, and applicable transmission/grid standards.</p><p><strong>Emergency Response</strong>: Respond promptly to equipment failures, trips, alarms, and emergency situations and support troubleshooting and system restoration.</p><p><strong>Documentation</strong>: Maintain accurate operational logs, inspection records, switching records, equipment status reports, and incident documentation.</p><p><strong>Coordination</strong>: Coordinate with Control Room Operators, Maintenance, Engineering, Grid/Transmission Control, and contractors to ensure safe and efficient transmission operations.</p><p><strong>Equipment Readiness</strong>: Verify the availability and operational condition of transmission equipment and promptly escalate defects that could affect system reliability.</p><p><strong>Continuous Improvement</strong>: Support operational improvements, reliability initiatives, and implementation of best practices across transmission operations.</p><p><strong>Desired Candidate Profile</strong></p><div>Diploma or Bachelor's degree in Electrical Engineering, Electrical Technology, Power Systems, or a related discipline.</div><div>Electrical safety and switching authorization certification is preferred.</div><div>Knowledge of Saudi electricity transmission regulations and grid requirements is an advantage.</div><div>3 - 7 years of experience in electrical transmission, substations, power generation, renewable energy, or utilities.</div><div>Experience working with HV/EHV transmission systems and substations is preferred.</div><div>Experience in shift-based operations and high-voltage switching is an advantage.</div><div><strong>Technical Competencies</strong></div><div>Strong knowledge of HV/EHV electrical systems and substations.</div><div>Understanding of transformers, circuit breakers, disconnectors, busbars, CTs, PTs/VTs, protection systems, and earthing systems.</div><div>Knowledge of electrical protection, control, and SCADA systems.</div><div>Ability to read single-line diagrams, electrical drawings, and equipment schematics.</div><div>Knowledge of Permit to Work, Lockout/Tagout, switching, and electrical isolation procedures.</div><div>Basic troubleshooting and fault-finding skills.</div><div>Familiarity with CMMS systems and operational reporting tools.</div><div><strong>Core Competencies</strong></div><div>Strong safety awareness and commitment to reliable operations.</div><div>High attention to detail and operational discipline.</div><div>Strong communication and teamwork skills.</div><div>Ability to work under pressure and respond effectively to emergencies.</div><div>Strong problem-solving and decision-making skills.</div><div>Ability to work independently and as part of a shift team.</div><div>Willingness to work in a 24/7 shift environment and remote project location at the NEOM Green Hydrogen Project.</div>

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About Align Technology and the Role</h3> <p style="margin:0 0 12px; ************;">Align Technology is seeking an <strong style="font-weight:700;">MEA Customer Success Supervisor</strong> to join our team in Riyadh, Saudi Arabia. This is a contract position responsible for the development and execution of customer success activities and strategy across the Middle East and African region. The Supervisor will report directly to the Manager of Customer Success and will oversee a team of 10 individuals.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Oversee the daily operational tasks of all team members across various countries in the Middle East and African region.</li> <li style="margin:0 0 6px;">Ensure strict adherence to processes and company policies by every team member, promoting effective and efficient task execution.</li> <li style="margin:0 0 6px;">Continuously monitor team capacity, workload, and Service Level Agreements (SLAs).</li> <li style="margin:0 0 6px;">Develop and maintain required reporting and dashboards, providing regular updates on Key Performance Indicators (KPIs).</li> <li style="margin:0 0 6px;">Establish and maintain a comprehensive knowledge base for the team.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Customer Partnership and Collaboration</h3> <p style="margin:0 0 12px; ************;">A core aspect of this role involves building long-lasting partnerships with customers and contributing to their success through various direct and indirect engagements:</p> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Provide support by responding to all Invisalign and iTero inquiries received via available support channels.</li> <li style="margin:0 0 6px;">Engage in personal interactions, including conducting face-to-face meetings and delivering on-site or off-site training courses.</li> <li style="margin:0 0 6px;">Act as the <strong style="font-weight:700;">Voice of the Customer</strong>, offering ideas and suggestions to enhance overall business operations, improve customer experience, and address specific customer inquiries.</li> <li style="margin:0 0 6px;">Serve as a trusted advisor to both internal and external customers on a range of operational topics.</li> <li style="margin:0 0 6px;">Collaborate effectively with various internal stakeholders, including departments such as Manufacturing, Marketing, Education, Sales, and Clinical Support.</li> <li style="margin:0 0 6px;">Work closely with the commercial organization to ensure high customer satisfaction and seamless end-to-end process execution.</li> <li style="margin:0 0 6px;">Identify and assist local teams in identifying best practices related to frontline support within their respective markets.</li> <li style="margin:0 0 6px;">Participate in cross-functional and regional projects, providing governance to innovation initiatives to ensure the development of appropriate product and research plans.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Required Qualifications</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Bachelor’s degree is required.</li> <li style="margin:0 0 6px;">1-3 years of directly related experience in people management.</li> <li style="margin:0 0 6px;">Proven experience in managing a team.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Essential Skills and Attributes</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Strong customer focus.</li> <li style="margin:0 0 6px;">Highly effective communicator with strong oral and written communication skills, including presentations, correspondence, and influencing abilities.</li> <li style="margin:0 0 6px;">Proficiency in managing competing demands, including prioritization, responsiveness, and keeping stakeholders informed.</li> <li style="margin:0 0 6px;">Effective internal and external stakeholder management skills.</li> <li style="margin:0 0 6px;">Solid problem-solving ability and meticulous attention to detail.</li> <li style="margin:0 0 6px;">High sense of accountability for tasks and a proactive "can-do" attitude.</li> <li style="margin:0 0 6px;">Appropriate sense of urgency in task execution.</li> <li style="margin:0 0 6px;">Demonstrated team player mentality.</li> <li style="margin:0 0 6px;">Analytical, strategic thinking, and strong business acumen.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Work Environment and Commitment</h3> <p style="margin:0 0 12px; ************;">The role requires a willingness to support your team across different time zones within the Middle East and African region. Travel will be a component of this position.</p>

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About Bureau Veritas and the Role</h3> <p style="margin:0 0 12px; ************;">Bureau Veritas, a world leader in Testing, Inspection and Certification (TIC), is seeking a <strong style="font-weight:700;">Senior Instrument Technician</strong> to join its team. This contract position is based in the <strong style="font-weight:700;">Makkah</strong> and <strong style="font-weight:700;">Jeddah</strong> regions, contributing to the delivery of high-quality services that help clients meet growing challenges in quality, safety, environmental protection, and social responsibility.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Core Instrument Management Responsibilities</h3> <p style="margin:0 0 12px; ************;">The Senior Instrument Technician is primarily responsible for the comprehensive management of analytical instruments, ensuring their optimal performance and reliability. Key duties include:</p> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Operating, troubleshooting, repairing, maintaining, and optimizing analytical instruments, with primary responsibility for ICP-MS and ICP-OES systems. Experience with AAS, XRF, and Carbon &amp; Sulphur analyzers is advantageous.</li> <li style="margin:0 0 6px;">Performing routine instrument performance checks, calibration verification, preventive maintenance, and corrective actions to ensure reliable operation and minimize downtime.</li> <li style="margin:0 0 6px;">Coordinating with service engineers and technical support teams for maintenance activities, repairs, spare parts requirements, and service interventions.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Laboratory Operations and Compliance</h3> <p style="margin:0 0 12px; ************;">This role also involves supporting daily laboratory operations and ensuring adherence to quality standards and regulatory requirements.</p> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Supporting analytical testing activities by ensuring instruments are properly configured, calibrated, and operating within performance specifications.</li> <li style="margin:0 0 6px;">Monitoring and maintaining adequate inventory levels of consumables, standards, reagents, and critical spare parts required for instrument operation.</li> <li style="margin:0 0 6px;">Ensuring testing equipment remains in good working condition and promptly reporting any malfunction, abnormal performance, or equipment damage.</li> <li style="margin:0 0 6px;">Maintaining accurate records of maintenance activities, calibration status, service reports, instrument performance, and related documentation using approved systems and LIMS.</li> <li style="margin:0 0 6px;">Supporting laboratory compliance with ISO/IEC 17025 requirements and participating in quality control, equipment verification, proficiency testing, and inter-laboratory comparison programs.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Team Collaboration and Supervisory Support</h3> <p style="margin:0 0 12px; ************;">The Senior Instrument Technician will contribute to team leadership and operational coordination within the laboratory setting.</p> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Assisting the Laboratory Supervisor in coordinating daily technical activities related to laboratory instrumentation and equipment reliability.</li> <li style="margin:0 0 6px;">Performing delegated supervisory responsibilities during the absence of the Laboratory Supervisor when required.</li> <li style="margin:0 0 6px;">Carrying out any other duties assigned by the Line Manager or Laboratory Manager.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Quality, Health, Safety, and Environment (QHSSE)</h3> <p style="margin:0 0 12px; ************;">Adherence to Bureau Veritas's stringent QHSSE policies and procedures is paramount for this role.</p> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Complying with BV HSE policies, procedures, and legal requirements.</li> <li style="margin:0 0 6px;">Maintaining a safe, clean, and hazard-free workplace and reporting any hazards, incidents, or unsafe conditions.</li> <li style="margin:0 0 6px;">Taking responsibility for personal and team health and safety.</li> <li style="margin:0 0 6px;">Participating in HSE initiatives, investigations, and risk control measures.</li> <li style="margin:0 0 6px;">Cooperating with all safety requirements and promoting a positive safety culture.</li> <li style="margin:0 0 6px;">Maintaining high standards of laboratory housekeeping, safety, and good laboratory practices, including proper handling and disposal of chemicals and laboratory waste.</li> <li style="margin:0 0 6px;">Complying with Bureau Veritas policies relating to Quality, Health &amp; Safety, Ethics, Confidentiality, and Impartiality.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Experience Requirements</h3> <p style="margin:0 0 12px; ************;">Candidates for this Senior Instrument Technician role should possess <strong style="font-weight:700;">5-10 years of relevant experience</strong> in instrument operation, maintenance, and troubleshooting within a laboratory or industrial setting.</p>

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About Bureau Veritas and the Role</h3> <p style="margin:0 0 12px; ************;">Bureau Veritas, a world leader in Testing, Inspection and Certification (TIC), is seeking a <strong style="font-weight:700;">Senior Instrument Technician</strong> to join its team. This contract position is based in the <strong style="font-weight:700;">Makkah</strong> and <strong style="font-weight:700;">Jeddah</strong> regions, contributing to the delivery of high-quality services that help clients meet growing challenges in quality, safety, environmental protection, and social responsibility.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Core Instrument Management Responsibilities</h3> <p style="margin:0 0 12px; ************;">The Senior Instrument Technician is primarily responsible for the comprehensive management of analytical instruments, ensuring their optimal performance and reliability. Key duties include:</p> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Operating, troubleshooting, repairing, maintaining, and optimizing analytical instruments, with primary responsibility for ICP-MS and ICP-OES systems. Experience with AAS, XRF, and Carbon &amp; Sulphur analyzers is advantageous.</li> <li style="margin:0 0 6px;">Performing routine instrument performance checks, calibration verification, preventive maintenance, and corrective actions to ensure reliable operation and minimize downtime.</li> <li style="margin:0 0 6px;">Coordinating with service engineers and technical support teams for maintenance activities, repairs, spare parts requirements, and service interventions.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Laboratory Operations and Compliance</h3> <p style="margin:0 0 12px; ************;">This role also involves supporting daily laboratory operations and ensuring adherence to quality standards and regulatory requirements.</p> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Supporting analytical testing activities by ensuring instruments are properly configured, calibrated, and operating within performance specifications.</li> <li style="margin:0 0 6px;">Monitoring and maintaining adequate inventory levels of consumables, standards, reagents, and critical spare parts required for instrument operation.</li> <li style="margin:0 0 6px;">Ensuring testing equipment remains in good working condition and promptly reporting any malfunction, abnormal performance, or equipment damage.</li> <li style="margin:0 0 6px;">Maintaining accurate records of maintenance activities, calibration status, service reports, instrument performance, and related documentation using approved systems and LIMS.</li> <li style="margin:0 0 6px;">Supporting laboratory compliance with ISO/IEC 17025 requirements and participating in quality control, equipment verification, proficiency testing, and inter-laboratory comparison programs.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Team Collaboration and Supervisory Support</h3> <p style="margin:0 0 12px; ************;">The Senior Instrument Technician will contribute to team leadership and operational coordination within the laboratory setting.</p> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Assisting the Laboratory Supervisor in coordinating daily technical activities related to laboratory instrumentation and equipment reliability.</li> <li style="margin:0 0 6px;">Performing delegated supervisory responsibilities during the absence of the Laboratory Supervisor when required.</li> <li style="margin:0 0 6px;">Carrying out any other duties assigned by the Line Manager or Laboratory Manager.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Quality, Health, Safety, and Environment (QHSSE)</h3> <p style="margin:0 0 12px; ************;">Adherence to Bureau Veritas's stringent QHSSE policies and procedures is paramount for this role.</p> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Complying with BV HSE policies, procedures, and legal requirements.</li> <li style="margin:0 0 6px;">Maintaining a safe, clean, and hazard-free workplace and reporting any hazards, incidents, or unsafe conditions.</li> <li style="margin:0 0 6px;">Taking responsibility for personal and team health and safety.</li> <li style="margin:0 0 6px;">Participating in HSE initiatives, investigations, and risk control measures.</li> <li style="margin:0 0 6px;">Cooperating with all safety requirements and promoting a positive safety culture.</li> <li style="margin:0 0 6px;">Maintaining high standards of laboratory housekeeping, safety, and good laboratory practices, including proper handling and disposal of chemicals and laboratory waste.</li> <li style="margin:0 0 6px;">Complying with Bureau Veritas policies relating to Quality, Health &amp; Safety, Ethics, Confidentiality, and Impartiality.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Experience Requirements</h3> <p style="margin:0 0 12px; ************;">Candidates for this Senior Instrument Technician role should possess <strong style="font-weight:700;">5-10 years of relevant experience</strong> in instrument operation, maintenance, and troubleshooting within a laboratory or industrial setting.</p>

????️ We're Hiring: Quality & Food Safety Manager | Riyadh, Saudi Arabia<br>We are looking for an experienced Quality & Food Safety Manager to lead quality assurance and food safety standards across our restaurant and catering operations in Riyadh. Role Purpose<br>Own and elevate the quality and food safety framework across Delta's F&B operations, ensuring consistent standards, regulatory compliance, and operational excellence across all kitchens and catering production.<br>Key Responsibilities Develop, implement, and audit QA/QC standards across all kitchens. Lead and manage the Food Safety Supervisor and Food Safety Officer team Ensure full compliance with HACCP, municipal, and Saudi food safety regulations Conduct regular audits, inspections, and corrective action follow-ups Partner with Executive Chefs on menu development from a food safety and quality standpoint Train kitchen and catering staff on food safety, hygiene, and quality standards Report quality and safety KPIs and risk areas to senior management<br>Required Qualifications Bachelor's degree in Food Science, Nutrition, or a related field Minimum 5 years' experience in a quality/food safety role within F&B, hospitality, or catering HACCP certification required; ISO 22000 knowledge is a plus Strong leadership and cross-functional communication skills Fluent in English; Arabic is a plus<br>Preferred Qualifications<br>Prior experience managing multi-site or catering operations Familiarity with Saudi municipal food safety regulations

JOB PURPOSE:To remotely control Automated Electric RTG cranes (AeRTGs) from the RCOS office, ensuring safe, efficient, and accurate container handling in the yard. The role combines technical monitoring with intervention-based crane control, supporting automation performance, operational safety, and yard productivity.<br>KEY ACCOUNTABILITIES:Operate AeRTGs from the RCOS to stack, retrieve, and relocate containers in assigned yard blocks. Monitor multiple automated cranes simultaneously, intervening where necessary to correct exceptions or unsafe conditions. Ensure accuracy of container moves and compliance with TOS (ZODIAC) instructions. Coordinate with Yard Supervisor and Planning to optimize crane allocation and reduce yard congestion. Escalate automation errors, delays, or breakdowns to Maintenance/IT support immediately. Enforce HSSE requirements by monitoring yard activity through camera systems and stopping operations in case of unsafe practices. Maintain logs and performance records of RCOS activities for productivity tracking and troubleshooting. Support continuous improvement in automation efficiency by providing operational feedback<br>QUALIFICATIONS, EXPERIENCE AND SKILLS:Diploma or Bachelor’s degree in Logistics, IT, Engineering, or related field (preferred). Minimum 1-2 years of experience in container terminal operations, with exposure to automated equipment. Familiarity with automation systems, TOS (ZODIAC), and remote-control technology. Strong situational awareness and multitasking skills. Technical troubleshooting ability for automation-related issues. Excellent communication and teamwork skills. Ability to remain alert and focused in a monitoring/control room environment

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>&nbsp;</p> <p>&nbsp;</p> <p><b>Purpose of the job</b></p> <p>To co-ordinate the inventory control process in the assigned depot by acting as the warehouse focal point,&nbsp;ensuring all sales orders/returns are managed as per the laid down&nbsp;Operational Excellence Standards, Policies &amp; Procedures.&nbsp;</p> <p><b>Key Accountabilities</b></p> <p><b></b><b><span>Store Operations</span></b></p> <ul> <li><span>Ensure the shift plan is applied in accordance with the depot's daily requirements.</span></li> <li><span>Delegate and&nbsp;</span><span>prioritize</span><span>&nbsp;</span><span>all duties to achieve objectives.</span></li> <li><span>Recognise</span><span>&nbsp;and resolve discrepancies as they arise.</span></li> <li><span>Ensure all “Goods In” products are received as per SOPs.</span></li> <li><span>Ensure all “Orders” are picked accurately and on time.</span></li> <li><span>Ensure all records (both electronic and paper) are maintained and recorded correctly.</span></li> <li><span>Perform other duties as requested by the Operations Manager and Supervisor.</span></li> <li><span>Maintain the companies' standards in relation to H&amp;S, Housekeeping, Food Safety, Accuracy, Discipline and Performance.</span></li> </ul> <p><b></b><b><span>Storage and Inventory keeping</span></b></p> <ul> <li><span>Always ensure stock integrity,</span><span>&nbsp;</span><span>adequate record keeping and manage all documentation to confirm proper stock levels and thereby maintain inventory control.</span></li> <li><span>Ensure proper storage of goods in predefined locations, with the right coding, labeling and storage conditions.</span></li> <li><span>Maintain inventory accuracy, regular cycle counting and reconciliation of stock.</span><span>&nbsp;</span></li> </ul> <p><b></b><b><span>Documentation/administration</span></b></p> <p><span>Process all required administration / documents related to issuing, receiving and returns as per company Policy and procedures.</span></p> <p><b></b><b><span>Issuing</span></b></p> <p><span>Monitor the issuing of all products according to release dates and application of FIFO</span><span>&nbsp;</span></p> <p><b></b><b><span>Loading/unloading</span></b></p> <p><span>Coordinate the loading and unloading of Sales Vans in accordance with planning to ensure timely availability of products for the customers.</span></p> <p><b></b><b><span>Waste/leakage handling</span></b></p> <p><span>Dispose-off wasted products and record the waste in accordance with company procedures.</span></p> <p><b></b><b><span>Store environment</span></b></p> <p><span>Maintain the companies' standards in relation to Housekeeping and Hygiene.</span></p> <p><b></b><b><span>SHEQ</span></b></p> <ul> <li><span>Ensure all SHEQ regulations and procedures are applied for store keeping.</span><b></b></li> <li><span>Maintain the companies' standards in relation to H&amp;S, Food Safety</span></li> </ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>&nbsp;</p> <p>&nbsp;</p> <p><b>Job Requirements</b></p> <ul> <li><span>Educational level: Minimum Bachelor's degree&nbsp;</span></li> <li><span>Minimal experience: 2 years in similar job (FMCG companies)</span></li> <li><span>A good working knowledge of warehouse procedures.</span></li> <li><span>Well versed with MS Word &amp; Excel.</span></li> <li><span>A good working knowledge of Warehouse Management System and or RF systems.</span></li> <li><span>Must be willing to work in Temperature controlled environments, Freezer and Chillers.</span></li> <li><span>Should be willing to work in a Flexible working hours environment, especially during holiday periods.</span></li> <li><span>Must be able to drive a forklift (Material Handling Equipment).</span></li> <li><span>Languages: Should be fluent in English and Arabic</span></li> </ul> <p><span><b><span>Job Competencies</span></b></span></p> <ul> <li>Team player</li> <li>Proactive behavior</li> <li>&nbsp; Flexible Attitude</li> <li>Ability to prioritize and multitask</li> <li>Practical and hands on mentality</li> <li>Aware of one's responsibility; takes ownership of his role</li> <li>Well-developed communication skills</li> <li>Supervisor and people management skills.</li> <li><span><span><span>The ability to work independently and make sound judgments in decision making.</span></span></span></li> </ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>&nbsp;</p> <p>&nbsp;</p> <p><b>Purpose of the job</b></p> <p>To co-ordinate the inventory control process in the assigned depot by acting as the warehouse focal point,&nbsp;ensuring all sales orders/returns are managed as per the laid down&nbsp;Operational Excellence Standards, Policies &amp; Procedures.&nbsp;</p> <p><b>Key Accountabilities</b></p> <p><b></b><b><span>Store Operations</span></b></p> <ul> <li><span>Ensure the shift plan is applied in accordance with the depot's daily requirements.</span></li> <li><span>Delegate and&nbsp;</span><span>prioritize</span><span>&nbsp;</span><span>all duties to achieve objectives.</span></li> <li><span>Recognise</span><span>&nbsp;and resolve discrepancies as they arise.</span></li> <li><span>Ensure all “Goods In” products are received as per SOPs.</span></li> <li><span>Ensure all “Orders” are picked accurately and on time.</span></li> <li><span>Ensure all records (both electronic and paper) are maintained and recorded correctly.</span></li> <li><span>Perform other duties as requested by the Operations Manager and Supervisor.</span></li> <li><span>Maintain the companies' standards in relation to H&amp;S, Housekeeping, Food Safety, Accuracy, Discipline and Performance.</span></li> </ul> <p><b></b><b><span>Storage and Inventory keeping</span></b></p> <ul> <li><span>Always ensure stock integrity,</span><span>&nbsp;</span><span>adequate record keeping and manage all documentation to confirm proper stock levels and thereby maintain inventory control.</span></li> <li><span>Ensure proper storage of goods in predefined locations, with the right coding, labeling and storage conditions.</span></li> <li><span>Maintain inventory accuracy, regular cycle counting and reconciliation of stock.</span><span>&nbsp;</span></li> </ul> <p><b></b><b><span>Documentation/administration</span></b></p> <p><span>Process all required administration / documents related to issuing, receiving and returns as per company Policy and procedures.</span></p> <p><b></b><b><span>Issuing</span></b></p> <p><span>Monitor the issuing of all products according to release dates and application of FIFO</span><span>&nbsp;</span></p> <p><b></b><b><span>Loading/unloading</span></b></p> <p><span>Coordinate the loading and unloading of Sales Vans in accordance with planning to ensure timely availability of products for the customers.</span></p> <p><b></b><b><span>Waste/leakage handling</span></b></p> <p><span>Dispose-off wasted products and record the waste in accordance with company procedures.</span></p> <p><b></b><b><span>Store environment</span></b></p> <p><span>Maintain the companies' standards in relation to Housekeeping and Hygiene.</span></p> <p><b></b><b><span>SHEQ</span></b></p> <ul> <li><span>Ensure all SHEQ regulations and procedures are applied for store keeping.</span><b></b></li> <li><span>Maintain the companies' standards in relation to H&amp;S, Food Safety</span></li> </ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>&nbsp;</p> <p>&nbsp;</p> <p><b>Job Requirements</b></p> <ul> <li><span>Educational level: Minimum Bachelor's degree&nbsp;</span></li> <li><span>Minimal experience: 2 years in similar job (FMCG companies)</span></li> <li><span>A good working knowledge of warehouse procedures.</span></li> <li><span>Well versed with MS Word &amp; Excel.</span></li> <li><span>A good working knowledge of Warehouse Management System and or RF systems.</span></li> <li><span>Must be willing to work in Temperature controlled environments, Freezer and Chillers.</span></li> <li><span>Should be willing to work in a Flexible working hours environment, especially during holiday periods.</span></li> <li><span>Must be able to drive a forklift (Material Handling Equipment).</span></li> <li><span>Languages: Should be fluent in English and Arabic</span></li> </ul> <p><span><b><span>Job Competencies</span></b></span></p> <ul> <li>Team player</li> <li>Proactive behavior</li> <li>&nbsp; Flexible Attitude</li> <li>Ability to prioritize and multitask</li> <li>Practical and hands on mentality</li> <li>Aware of one's responsibility; takes ownership of his role</li> <li>Well-developed communication skills</li> <li>Supervisor and people management skills.</li> <li><span><span><span>The ability to work independently and make sound judgments in decision making.</span></span></span></li> </ul></div>

Job Objective: <br>To maintain smooth operation of Cold End line equipment by monitoring all processes, methods, and materials. The role focuses on identifying problems, finding solutions to minimize losses, and applying the best optimization techniques to reduce losses and increase yield in order to achieve company targets.<br>Key Responsibilities: Monitor processes, methods, materials, and surroundings in the Cold End to detect and resolve problems. Understand and follow the production plan schedule for the shift. Continuously develop knowledge of Cold End equipment and parameters for effective operation. Operate and inspect Cold End equipment, especially after emergency start-ups. Maintain strong communication with Team Leader and team members. Apply optimization scenarios to reduce line losses and increase yield. Adjust process parameters to ensure smooth Cold End operation. Conduct random equipment checks and ensure glass quality standards. Report cutting defects, near misses, unsafe acts/conditions to the Team Leader. Maintain 5S standards and proper handover during shift changes. Perform tasks as directed by immediate supervisor/management.<br> Requirements: <br>Diploma in Engineering, Manufacturing, or related field. Minimum 2 years of experience in a similar role within the glass manufacturing industry. Proficiency in English language (written and spoken). Strong knowledge of process control and quality standards. Analytical and problem-solving mindset. Strong commitment to safety, teamwork, and continuous improvement.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Summary<p>Performs and acts in a lead capacity for a specialized subsection/unit function of a laboratory section.</p><br><br>Essential Responsibilities and Duties<p>1. Organizes workflow and day-to-day operations of the subsection. Ensures all work to be completed and reported promptly. Assigns staff to maximize efficiency and productivity. 2. Disseminates appropriate information to subordinates. Maintains the computerized Laboratory Information Systems for the subsection.&nbsp;</p><br><br>3. Ensures that optimum levels of supplies are available to provide uninterrupted services; maintains an ordering and supply inventory system.<br>&nbsp;4. Assists in development of new methodologies and the evaluation of new equipment. Updates policy and procedure manuals in accordance with specified guidelines.<br>&nbsp;5. Performs analyses, tests, and procedures as per established laboratory standards, maintaining quality control of the subsection. Participates in the Quality Assurance programs of the section. Investigates incident reports and implements associated corrective action.&nbsp;<br>&nbsp;6. Maintains equipment repair logs and equipment operation, maintenance, and re air records of subsection.&nbsp;<br>7. Assists section supervisor in on-going employee performance appraisal. Counsels subordinates to improve performance.&nbsp;<br>8. Orients, trains, provides continuing education, and guides lower graded personnel, other laboratory and healthcare personnel, students, and residents. Assists the section supervisor in evaluation of potential employment candidates. Implements and maintains appropriate laboratory safety procedures and practices.&nbsp;<br>9. Performs technical duties as assigned including weekends, night shifts, and on call coverage.&nbsp;<br>10. Comply with the section policies, procedures and protocols and follow the section quality improvement program in accordance with CBAHI, JCI, CAP, SFDA and other accreditation agencies standards.&nbsp;<br>Education<p><span><span></span></span></p><p>Master's or Bachelor's Degree in Medical Technology or Clinical Laboratory Sciences is required.</p><br><br><br><br>Experience Required<br><p>Grade 09:Two (2) years of related experience with Master's or four (4) years with Bachelor's Degree is required.&nbsp;</p><br><br><p>Grade 10:</p><br><br><p>&nbsp;? Four (4) years as Senior Medical Technologist at KFSH&amp;RC or (Grade 09) of related experience is required.&nbsp;</p><br><br><p>? Average of annual performance appraisal at least (3.5) for the last four (4) years.&nbsp;</p><br><br><p>? One hundred 100) hours of cumulative continued medical education CME&nbsp;</p><br><br>Other Requirements(Certificates)<p><span></span></p><p>? Current Registration from country of origin and Saudi Commission for Health Specialties (SCI-IS) is required.&nbsp;</p><br><br><p>? Registration in National Certification Agency, Clinical Special Cytogenetics/American Society of Clinical Pathologists, Clinical Special Cytogenetics for American, registered Medical Technologist for Europe or Australian Institute of Medical Lab Science, Fellow Institute of Medical Lab Sciences for British or Australian Institute of Medical Sciences for Australian or Medical Lab Science for New Zealander, or registered as Medical Technologist in country of origin is required for non-Saudi.</p><br><br><br><br><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Job Summary<br><br>The Golf Landscape Attendant is responsible for maintaining the appearance, health, and cleanliness of landscaped areas across the golf course. The role supports the overall presentation of the course by caring for lawns, gardens, trees, shrubs, flower beds, and irrigation systems while ensuring a safe and high-quality environment for members and guests.<br><br>Key Responsibilities<br><br> Maintain landscaped areas including gardens, flower beds, pathways, and surrounding facilities. Mow, edge, trim, and maintain lawns, roughs, and ornamental turf areas. Plant, prune, water, fertilize, and mulch trees, shrubs, flowers, and other landscape features. Remove weeds, litter, leaves, and debris from landscaped areas. Monitor plant health and report signs of pests, diseases, or irrigation issues. Operate and maintain landscaping equipment such as mowers, trimmers, hedge cutters, blowers, and utility vehicles. Assist with irrigation system operation, inspections, and basic repairs. Support seasonal planting and landscape enhancement projects. Follow health, safety, and environmental procedures at all times. Maintain tools and equipment in clean and safe working condition. Assist with special events, tournaments, and course presentation as required. Perform other duties assigned by the Landscape Supervisor or Golf Course Superintendent. <br><br>Requirements<br><br>Education<br><br> High School Diploma or equivalent preferred. <br><br>Experience<br><br> 2-3 years of experience in landscape maintenance, horticulture, golf course maintenance, or luxury resort landscaping

Job Description – Maintenance Worker (Heavy Equipment)<br>Position: Maintenance Worker<br>Job Summary:Responsible for maintaining, inspecting, troubleshooting, and repairing the mechanical and electrical systems of heavy equipment to ensure safe, reliable, and efficient operation.<br>Key Responsibilities:<br>* Perform preventive and corrective maintenance on heavy equipment.* Inspect heavy equipment to identify mechanical and electrical faults.* Diagnose and repair mechanical and electrical problems.* Replace defective or worn mechanical and electrical components.* Test equipment after maintenance to ensure proper operation.* Report major faults and maintenance requirements to the Maintenance Supervisor.* Maintain accurate maintenance records and complete work orders.* Follow all company health, safety, and environmental (HSE) procedures.* Keep tools and the workshop clean and organized.* Ensure maintenance work is completed safely and on time.<br>Job Requirements:<br>* High school diploma or Technical/Vocational certificate in Mechanical or Electrical Engineering (preferred).* Experience in heavy equipment maintenance.* Knowledge of mechanical and electrical systems of heavy equipment.* Ability to diagnose and repair equipment faults.* Ability to use maintenance tools and equipment safely.* Basic understanding of maintenance manuals and technical instructions.* Ability to work independently and as part of a team.* Commitment to safety procedures and company policies.<br>Benefits and Compensation:<br>* Competitive salary.* Annual salary increase based on performance.* Medical insurance.* Annual paid leave.* Annual round-trip flight ticket.* Additional allowance for assignments at project sites.* Overtime pay.

Job Summary<br><br>The Golf Landscape Attendant is responsible for maintaining the appearance, health, and cleanliness of landscaped areas across the golf course. The role supports the overall presentation of the course by caring for lawns, gardens, trees, shrubs, flower beds, and irrigation systems while ensuring a safe and high-quality environment for members and guests.<br><br>Key Responsibilities<br><br> Maintain landscaped areas including gardens, flower beds, pathways, and surrounding facilities. Mow, edge, trim, and maintain lawns, roughs, and ornamental turf areas. Plant, prune, water, fertilize, and mulch trees, shrubs, flowers, and other landscape features. Remove weeds, litter, leaves, and debris from landscaped areas. Monitor plant health and report signs of pests, diseases, or irrigation issues. Operate and maintain landscaping equipment such as mowers, trimmers, hedge cutters, blowers, and utility vehicles. Assist with irrigation system operation, inspections, and basic repairs. Support seasonal planting and landscape enhancement projects. Follow health, safety, and environmental procedures at all times. Maintain tools and equipment in clean and safe working condition. Assist with special events, tournaments, and course presentation as required. Perform other duties assigned by the Landscape Supervisor or Golf Course Superintendent. <br><br>Requirements<br><br>Education<br><br> High School Diploma or equivalent preferred. <br><br>Experience<br><br> 2-3 years of experience in landscape maintenance, horticulture, golf course maintenance, or luxury resort landscaping

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Assign team for day-to-day activities as per job requirements. Prepare and maintain shop/section production activity schedules based on planning inputs and ensure execution of dismantling and dispatch schedules. Record and maintain production hours as per daily basis. Ensure jobs are completed as assigned/set time. Ensure daily and monthly production progress as per plan and readiness of outgoing products. Ensure quality, control procedures, and checklists are followed during dismantling, packing, and dispatch stages.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>B.E./B.Tech in Electrical Mechanical Engineering or equivalent.</li><li>Minimum 5-6 years of experience as a Dispatch Section Supervisor in a transformer manufacturing company.</li><li>Good understanding of drawings.</li><li>Fluent in English (speaking, reading, and writing).</li></ul><p></p></section>

<p><br></p><p><b>Key Responsibilities</b></p><p>General</p><ul><li>Report directly to the Astronomy Supervisor and support the successful delivery of astronomy experiences.</li><li>Ensure astronomy equipment and operational assets are fully prepared before each guest experience.</li><li>Assist in developing and implementing operational procedures for astronomy tours, events, and festivals.</li><li>Maintain the presentation, cleanliness, and functionality of astronomy facilities, structures, and equipment.</li><li>Support operations across inland and island destinations as required.</li><li>Assist with planning, logistics, transportation, and operational readiness.</li></ul><p>Experience Development</p><ul><li>Support the Astronomy Supervisor in developing astronomy experiences, events, and educational programmes.</li><li>Assist in evaluating, selecting, and recommending astronomy equipment and optical instruments.</li><li>Coordinate with Procurement and Operations teams regarding equipment acquisition and replacement.</li><li>Support RSG departments during project delivery to ensure operational objectives and design intent are achieved.</li><li>Develop comprehensive knowledge of astronomy programmes, observatories, and observation sites.</li><li>Contribute to the development of new astronomy experiences across The Red Sea destination.</li><li>Participate in identifying and assessing new observation locations suitable for premium guest experiences.</li><li>Stay informed of astronomy industry trends, standards, and operational best practices.</li></ul><p>Operations</p><ul><li>Deliver astronomy experiences across inland and island destinations.</li><li>Conduct guest safety briefings before every experience.</li><li>Guide guests during astronomy activities while ensuring their safety and enjoyment.</li><li>Educate guests on astronomy, dark-sky conservation, and responsible environmental practices.</li><li>Maintain compliance with safety procedures, emergency response plans, risk assessments, and first aid requirements.</li><li>Ensure all astronomy assets are clean, functional, and guest-ready.</li><li>Operate manual and computerized telescopes, binoculars, and supporting optical equipment.</li><li>Configure lenses, filters, and accessories to optimize celestial observations.</li><li>Deliver telescope viewing sessions, stargazing programmes, and astrophotography experiences.</li><li>Explain astronomy concepts and telescope operation in a clear and engaging manner.</li><li>Perform routine inspections and preventive maintenance of telescopes and optical equipment.</li><li>Support annual deep maintenance of mirrors, lenses, alignment systems, and optical components.</li><li>Perform telescope software updates and maintain accurate astronomical databases.</li><li>Maintain inventory records, warranty documentation, and vendor coordination.</li><li>Capture astrophotography content as required and maintain associated equipment.</li><li>Support the setup and development of observatories and observation sites.</li><li>Assist in planning and delivering astronomy festivals, special events, and educational programmes.</li><li>Coordinate closely with Astronomy Guides, Tour Assistants, and Operations teams regarding programme schedules, equipment requirements, moon phases, weather conditions, and logistics.</li><li>Communicate operational updates, guest feedback, and equipment requirements to management.</li><li>Stay current with astronomy discoveries, emerging technologies, and industry developments.</li></ul><p>Policies, Procedures &amp; Reporting</p><ul><li>Comply with all company policies, procedures, standard operating procedures, and work instructions.</li><li>Maintain accurate operational records, reports, inventories, and maintenance documentation.</li><li>Provide recommendations to improve guest experiences, operational efficiency, and equipment readiness.</li><li>Demonstrate a thorough understanding of risk assessments, method statements, and safe working practices.</li></ul><p>Health, Safety &amp; Environment</p><ul><li>Adhere to all health, safety, quality, and environmental policies.</li><li>Promote safe working practices and environmental sustainability throughout all operations.</li><li>Participate in operational reviews and continuous improvement initiatives with the Astronomy team.</li></ul><p>Continuous Improvement</p><ul><li>Identify opportunities to improve systems, operational processes, guest experiences, productivity, and cost efficiency through international best practices.</li></ul><p>Key Stakeholders</p><ul><li>Internal: Astronomy Supervisor, Astronomy Guides, Tour Assistants, RSSE Operations, Guest Experience, Procurement, Back-of-House Operations, Health &amp; Safety, Relevant Red Sea Global departments</li><li>External: Guests, Resort Operations Teams, Suppliers and Vendors, Community Partners, Astronomy Service Providers, Training Providers, External Operational Partners</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Astronomy, Physics, Tourism, Hospitality, Business Management, Environmental Studies, or a related discipline.</li><li>Minimum two (2) years of experience within tourism, hospitality, adventure tourism, or guest experience operations.</li><li>Minimum two (2) years of practical experience operating astronomy and optical equipment.</li><li>Demonstrated experience delivering astronomy-related experiences.</li><li>Experience operating manual and computerized telescopes, including large-aperture systems.</li><li>Experience performing routine and advanced maintenance of telescopes and optical equipment.</li><li>Experience with telescope alignment, mirror collimation, and calibration.</li><li>Knowledge of astronomy tours, events, festivals, and guest experience operations.</li><li>Experience in astrophotography techniques and equipment.</li><li>Wilderness First Aid certification or internationally recognized First Aid certification.</li><li>Essential Skills: Excellent verbal and written communication skills in English and Arabic. Outstanding customer service and guest engagement skills. Strong understanding of luxury tourism and premium guest experiences. Knowledge of astronomy equipment, optical systems, and operational procedures. Strong organizational and time management skills. Ability to work independently and collaboratively. Professional, reliable, and highly detail-oriented. Ability to exercise sound judgment while maintaining confidentiality. Proficiency in Microsoft Office applications. Passion for astronomy, science education, and environmental conservation.</li><li>Desirable Skills: Additional spoken languages. Astronomy industry or business experience. Experience supporting astronomy events or festivals. Knowledge of health and safety requirements for outdoor tourism. Experience delivering tours across diverse environments. Interest in environmental conservation and dark-sky protection.</li><li>Job Context: Advanced knowledge of astronomy principles and observational techniques. Strong understanding of telescope optics, astrophotography, and optical systems. Experience using both manual and computerized telescopes and binoculars. Ability to support programme planning and experience delivery. Strong understanding of guest expectations within luxury hospitality. Ability to mobilize and prepare astronomy assets efficiently. Flexibility to work evenings, overnight shifts, weekends, and travel across The Red Sea destination as operationally required.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Reimagine What’s Possible </b></p><p><br></p><p><br></p><p><b><u>POSITION SUMMARY</u></b></p><p><b><u>Purpose</u></b></p><p>The HYCO Steam Methane Reformer Shift Operator is accountable for the day-to-day operation for one of the APQ facilities which can include a Hydrogen Steam Methane Reformer, a CO2 Removal Unit &amp; CO2 Compression, Auxiliary PSA, Membrane Unit, related Utilities and pipeline network for the Air Products Qudra (APQ) Company in Jubail, Saudi Arabia.</p><p><b><u>Nature &amp; Scope</u></b></p><p>The HYCO Shift Operator, reporting to the HYCO Lead/Shift Supervisor, is accountable for the day-to-day operation of the HYCO facility, ensuring the production requirements set by the customer are achieved in a safe and efficient manner.&nbsp; The Shift Operator will execute daily tasks which include preparing and implementing safety work permits, LOTO, complete operations preventative maintenance activities, and assist the maintenance and engineering teams in preparing and executing corrective maintenance activities.</p><p>NOTE: “ALL OPERATORS INTERVIEWED BASED ON YEARS OF SERVICE, EXPERIENCE, AND LEADERSHIP SKILLS WILL BE EVALUATED AND CONSIDERED FOR LEAD AND SUPERVISOR POSITIONS AFTER COMPLETION OF THE OPERATOR PROGRESSION COURSE.&nbsp; PERSONS WITH A MINIMUM OF 5 YEARS TO 15 + YEARS EXPERIENCE IN PLANT OPERTIONS AND LEADERSHIP POSITIONS WILL BE CONSIDERED”.</p><p><b><u>PRINCIPAL ACCOUNTABILITIES</u></b></p><p><b><u>Safety</u></b></p><p>Maintain a safe work environment.&nbsp; Demonstrate leadership with all company &amp; industry safe work processes to prevent all injuries.&nbsp; Ensure proper documentation is maintained for safety related activities.</p><p><b><u>Technical:</u></b></p><ul><li>Operate the HYCO Steam Methane Reformer and CO2 recovery units and ancillary equipment including water treatment units as prescribed by the Work Instruction Procedures</li><li>Operate the pipeline network to supply hydrogen, steam, and CO2 to the pipeline customers safely and efficiently.&nbsp;The Pipeline operations team will be part of the overall operating team and will also manage the oxygen and nitrogen pipeline products.</li><li>Provide Operations support &amp; guidance during the commissioning of the plant.&nbsp;Maintain accurate document control and monitor quality assurance initiatives.&nbsp;</li><li>Provide Operations guidance to ensure safety, reliability and maintainability of equipment, processes, utilities, and controls.</li><li>Manage plant production efficiently based on input provided from Plant Management and Plant Production Engineering to ensure safety and reliability targets are met to achieve maximum profitable.</li><li>Report shift production progress and plant status to the Shift Supervisor, providing operational solutions for shortfall areas.</li></ul><p><b><u>Operations</u></b></p><ul><li>Ensure the safety of all operations personnel by utilizing the APQ Basic Safety Practice program, which includes Safety Work Permits, LOTO, Confined Space, etc.&nbsp;The position facilitates executing, organizing, and auditing, to build the Air Products safety culture into the APQ.</li><li>Ensure compliance with process safety, MOC’s, and OPHR requirements.</li><li>Operate the facility insuring Environmental and Regulatory requirements are not exceeded.</li><li>Assist in the commissioning activities of the facility</li><li>Ensure Air Products and APQ standards, and global best practices for EH&amp;S, productivity, reliability, quality, and overall customer services are met</li><li>Follow the Site Work Instruction Manuals for the HYCO, CO2, and ancillary equipment units, along with adhering to other operating and maintenance procedures and checklists to meet the customer’s satisfaction on safety, reliability, product quality, and flexibility of product supply while in compliance of contractual requirements.</li><li>Follow shift turnover protocols to ensure the safe and efficient handover to the following shift.</li><li>Support &amp; maintain close working relationships with engineering and maintenance personnel to continuously monitor &amp; evaluate plant systems &amp; equipment through a Plant Process Advisory Model.</li><li>Support the maintenance and engineering team in maintaining plant reliability through the execution of preventive maintenance activities scheduled and coordinating of corrective maintenance activities of the equipment in order to optimize activities during plant shut-downs to avoid business interruption.</li><li>Provide operations support and participate in investigations and Root Cause Analysis in order to identify &amp; implement sustainable corrective actions.</li><li>Facilitate attainment of operational excellence and customer satisfaction via operations productivity, reliability, quality, and continuous improvement initiatives.</li><li>Maintain customer communications and relationships at the ‘board’ level, insuring customer demand rates are satisfied while maximizing the efficiency and profitability of the facility.</li><li>Communication of plant activities with other shifts to maintain continuity between shifts for a safe and reliable operation.</li><li>Execute other duties as assigned from reporting managers in a timely and efficient manner.</li><li><br></li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b><u>JOB REQUIREMENTS</u></b></p><ul><li>Bachelor’s degree in Chemical, Mechanical, or Chemical Process Operations preferred.&nbsp;An Associate Technical Degree (2-year certificate) will be considered based on years of experience and competence. Experience in process plant operation, demonstrated Hydrogen/SMR/acid gas removal units production plant knowledge a plus with a minimum of 5 years plant operations experience.</li><li>Expectation based on level of experience for the operations team to achieve a ‘Level 1 / Board Level’ status within 2 – 4 years.&nbsp;Operators will be evaluated during the training period and placed at the level of competence accordingly. All the operations team are considered field and board operators when Level 1 is achieved.</li><li>Knowledgeable in the local environmental and health and safety requirements.</li><li>Demonstrated interpersonal skills.</li><li>A strong commitment to employee involvement, team building and diversity.</li><li>Able to communicate between operations and maintenance teams.</li><li>Ability to communicate with the customer at the board level on a daily basis.</li><li>Proficiency in English speaking and writing.</li></ul><p><br></p></div>

<p>Perform routine, preventive, and emergency mechanical maintenance work in accordance with approved policies and procedures. Monitor the performance of production units and ensure they operate within designated operational limits, reporting any observations that may affect equipment efficiency. Identify the tools and equipment required for maintenance, assess their readiness, and carry out preventive maintenance to ensure their continuous availability. Organize and store maintenance tools in their designated locations, maintain them properly, and ensure proper disposal of maintenance waste. Carry out mechanical repair work such as welding, cutting, and refurbishing replaced parts to ensure their readiness and efficiency. Comply with safety procedures before starting work, including verifying the necessary permits and lockout/tagout forms. Perform any other tasks assigned by the direct supervisor.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>Follow all relevant Stock Count policies, processes and standard operating procedures so that work is carried out in a controlled and consistent manner. Implement activities under close supervision. Escalate complex problems to the relevant person to ensure case/issue is closed efficiently and in timely a manner. Ensure that each individual item is accurately scanned. Highlight all issues of concern to Supervisor during the count which may have impact on the accuracy of stock count result. Cooperate with others to complete the Stock Count Scanning. Ensure an accurate check/recheck of items scanned. Ensure collection of scanners, cradle and all other accessories, count it before leaving the Store premised.</p><p><strong>Desired Candidate Profile</strong></p><p>2 years of experince as a Stockroom operative in Retail preferably Fashion.</p>

<p>Follow all relevant Stock Count policies, processes and standard operating procedures so that work is carried out in a controlled and consistent manner</p><p>Implement activities under close supervision</p><p>Escalate complex problems to the relevant person to ensure case/issue is closed efficiently and in timely a manner</p><p>Ensure that each individual item is accurately scanned</p><p>Highlight all issues of concern to Supervisor during the count which may have impact on the accuracy of stock count result</p><p>Cooperate with others to complete the Stock Count Scanning</p><p>Ensure an accurate check/recheck of items scanned</p><p>Ensure collection of scanners, cradle and all other accessories, count it before leaving the Store premised.</p><p><strong>Desired Candidate Profile</strong></p><p>2 years of experince as a Stockroom operative in Retail preferably Fashion.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>on behalf of our client, we are seeking a Supervisor to join their company in Riyadh :</p><p>1. Team Leadership &amp; Staff Development</p><p>2. Sales Performance &amp; Business Development</p><p>3. Customer Experience &amp; Event Management</p><p>4. Store Operations &amp; Administration</p><p>5. Presentation &amp; Cleanliness</p><p>6. Professionalism, Compliance &amp; Reliability</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>1–2 years of supervisory or team leader experience in retail, entertainment, leisure, F&amp;B, or family focused environments.</li><li>A positive, collaborative approach and the ability to motivate a team.</li><li>Strong communication skills with guests, colleagues, and management.</li><li>Commercial awareness, with an understanding of sales targets and KPIs.</li><li>High energy, reliability, and a passion for delivering exceptional guest experiences.</li><li>A commitment to FunQuest's mission and child-friendly culture.</li></ul><p></p></section>