Mechanical Design Engineer Jobs in Saudi

Our esteemed client a Tier-1, market-leading PEB & Structural Steel company in KSA is seeking an accomplished Manager – Industrial Engineering to lead industrial engineering, productivity, and operational excellence initiatives across its manufacturing operations.<br>This is a strategic leadership opportunity for an industrial engineering professional with strong exposure to PEB / Structural Steel manufacturing, productivity optimization, capacity planning, manpower effectiveness, and process improvement.<br>Key Focus Areas• Lead Industrial Engineering across fabrication and production operations.• Drive productivity improvement, process optimization, and operational standardization.• Establish work measurement, productivity standards, and performance benchmarks.• Optimize capacity, manpower, workflow, layouts, and resource utilization.• Identify bottlenecks, process losses, idle time, and productivity gaps.• Develop KPI dashboards and provide data-driven recommendations to leadership.• Lead cross-functional improvement initiatives with Production, Engineering, Planning, Supply Chain, Quality, HR, and Maintenance.• Develop and lead the Industrial Engineering team.<br>???? Critical Skills Industrial Engineering | PEB & Structural Steel | Productivity Improvement | Lean & Continuous Improvement | Capacity & Manpower Planning | Work Measurement | Process Optimization | KPI & Data Analysis.<br>Candidate Profile???? Bachelor’s degree in Industrial, Mechanical, Production, Manufacturing Engineering, or related field.???? 12+ years of relevant industrial engineering / manufacturing experience.???? Strong experience in PEB, Structural Steel, Steel Fabrication, or project-based manufacturing.???? Proven managerial and team leadership experience.???? Strong analytical, productivity, and operational excellence capabilities.???? Excellent English communication; Arabic is an advantage.

<p><strong style="font-size: 11px;">Inspection &amp; Testing</strong></p><ul><li>Coordinate source inspections and supplier surveillance activities.</li><li>Review and monitor supplier ITPs and inspection procedures.</li><li>Witness or coordinate:<ul><li>Factory Acceptance Tests (FAT)</li><li>Performance Tests</li><li>Functional Tests</li><li>Hydrostatic / Pressure Tests</li><li>Electrical Tests</li><li>Mechanical Tests</li><li>Material Tests</li><li>Dimensional Inspections</li><li>Coating / Painting Inspections</li><li>Welding Inspections</li><li>NDT Activities</li></ul></li><li>Review test results and verify compliance with specified acceptance criteria.</li><li>Ensure failed tests are investigated and corrective actions implemented.</li><li>Coordinate inspection release and material / equipment acceptance.</li><li>Verify final inspection documentation before shipment.</li></ul><p><strong>Procurement &amp; Engineering Coordination</strong></p><ul><li>Coordinate with Procurement to ensure quality requirements are incorporated into purchase orders and supplier agreements.</li><li>Review technical specifications and quality requirements included in procurement packages.</li><li>Coordinate with Engineering to clarify technical and quality requirements.</li><li>Review supplier technical submittals and deviations.</li><li>Monitor approved vendor and manufacturer lists.</li><li>Support technical evaluation of alternative suppliers where required.</li><li>Ensure supplier changes and substitutions follow the project approval process.</li><li>Monitor long-lead equipment quality status and risks.</li><li>Identify quality issues that may affect procurement schedules and project milestones.</li></ul><p><strong>Supplier NCR &amp; Corrective Action Management</strong></p><ul><li>Lead management of supplier-related NCRs and quality observations.</li><li>Review supplier proposed corrective actions.</li><li>Conduct or coordinate root cause analysis for significant quality issues.</li><li>Monitor corrective and preventive actions through closure.</li><li>Verify objective evidence supporting NCR closure.</li><li>Monitor recurring supplier defects and identify systemic issues.</li><li>Escalate critical quality issues and potential delivery risks to Project Management.</li></ul><p><strong>Supplier Performance Management</strong></p><ul><li>Establish and monitor supplier quality KPIs, including:<ul><li>NCR Rate</li><li>Inspection Pass Rate</li><li>FAT Pass Rate</li><li>Material Rejection Rate</li><li>Defect Rate</li><li>On-Time Quality Documentation</li><li>Corrective Action Closure</li><li>Repeat Non-Conformances</li></ul></li><li>Develop supplier quality performance reports and dashboards.</li><li>Identify underperforming suppliers and recommend improvement actions.</li><li>Support supplier performance reviews and quality meetings.</li><li>Participate in supplier audits and capability assessments.</li><li>Develop lessons learned and continuous improvement initiatives.</li></ul><p><strong>Airport / Infrastructure &amp; Critical Equipment</strong></p><ul><li>Provide supplier quality oversight for critical airport and infrastructure equipment.</li><li>Support quality management of equipment and materials associated with:<ul><li>MEP Systems</li><li>Electrical Systems</li><li>Mechanical Equipment</li><li>ICT / ELV Systems</li><li>Fire &amp; Life Safety Systems</li><li>Wet &amp; Dry Utilities</li><li>Roads &amp; Infrastructure</li><li>Airfield Systems</li><li>Specialist Airport Equipment</li></ul></li><li>Apply risk-based inspection strategies to critical and long-lead equipment.</li><li>Coordinate supplier inspections for equipment requiring specialized testing or certification.</li><li>Ensure critical equipment complies with Client, Consultant, authority, and airport requirements.</li></ul><p><strong>Quality Documentation &amp; Handover</strong></p><ul><li>Review and verify supplier Manufacturing Record Books (MRBs).</li><li>Ensure quality documentation is complete, accurate, and traceable.</li><li>Review:<ul><li>Material Certificates</li><li>Certificates of Conformity</li><li>Test Reports</li><li>Inspection Reports</li><li>FAT Records</li><li>Calibration Certificates</li><li>Welding Records</li><li>NDT Reports</li><li>Coating Reports</li><li>Release Notes</li><li>Warranty Documentation</li></ul></li><li>Coordinate submission of supplier quality dossiers for project handover.</li><li>Ensure final documentation is aligned with project and Client requirements.</li></ul><p><strong>What Required Skills You ll Bring</strong></p><ul><li>Bachelor's Degree in Engineering, Quality Management, Manufacturing Engineering , or a related discipline.</li><li>Minimum 10 years of relevant experience in supplier quality, vendor inspection, manufacturing quality, or project QA/QC.</li><li>Strong experience managing supplier and manufacturer quality for major construction / infrastructure projects.</li><li>Experience with major airport, infrastructure, industrial, transportation, or large-scale development projects is highly desirable.</li><li>Strong knowledge of supplier quality management and manufacturing inspection processes.</li><li>Experience with FATs, source inspections, vendor surveillance, NCR management, and quality documentation.</li><li>Strong understanding of ISO 9001 quality management systems.</li><li>Experience with multidisciplinary equipment and materials is preferred.</li><li>ASQ, CQI, ISO 9001 Lead Auditor, or equivalent certification is an advantage.</li><li>Strong communication, negotiation, coordination, analytical, and problem-solving skills.</li></ul><p><strong>What Desired Skills You ll Bring</strong></p><ul><li>Supplier Quality Management</li><li>Vendor Quality Assurance</li><li>Manufacturer Surveillance</li><li>Source Inspection</li><li>Factory Acceptance Testing</li><li>Supplier Auditing</li><li>Inspection &amp; Testing</li><li>Manufacturing Quality</li><li>NCR Management</li><li>Root Cause Analysis</li><li>Corrective &amp; Preventive Actions</li><li>Material &amp; Equipment Quality</li><li>Quality Documentation</li><li>Supplier Performance Management</li><li>Procurement Quality</li><li>Technical Coordination</li><li>Risk-Based Inspection</li><li>Quality Reporting</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Degree in Engineering, Quality Management, Manufacturing Engineering , or a related discipline. Minimum 10 years of relevant experience in supplier quality, vendor inspection, manufacturing quality, or project QA/QC. Strong experience managing supplier and manufacturer quality for major construction / infrastructure projects. Experience with major airport, infrastructure, industrial, transportation, or large-scale development projects is highly desirable. Strong knowledge of supplier quality management and manufacturing inspection processes. Experience with FATs, source inspections, vendor surveillance, NCR management, and quality documentation. Strong understanding of ISO 9001 quality management systems. Experience with multidisciplinary equipment and materials is preferred. ASQ, CQI, ISO 9001 Lead Auditor, or equivalent certification is an advantage. Strong communication, negotiation, coordination, analytical, and problem-solving skills.</p>

<p>&nbsp;<b>Responsibilities </b>As a Service Technician, you hold an important role as the frontline of our service agreements and taking care of the customers' turbines. The position requires accuracy and professionalism as the quality and personal safety of our service work is highly considered. To succeed in this role, we believe you possess good knowledge of electricity and mechanics as well as being service-minded. Your responsibilities will be: • Electrical and mechanical troubleshooting and repairs • Service and maintenance according to the agreement, as well as carrying out a diversity of check-ups, repairs, and replacement activities of turbine components • Friction-less operation of our turbines and use of our systems like condition monitoring and remote control • Contact with customers regarding completed and upcoming service and repairs • Responsibility of the service vehicle, warehouse and order of material, tools, and spare parts • Daily reporting in SAP • Work to the highest safety and environmental standards whilst ensuring that service targets are met • Assemble components and main components according to current rules or work instructions, if necessary, making use of internal or external cranes Qualifications On the professional level, we believe you have: • Experience or a degree within electricity, mechanics, or hydraulics, and is still eager to develop your skills within these areas • Good knowledge in English is a plus • Computer knowledge, as the tasks include regular reporting and communication through various systems. Experienced in handling different tools or systems to monitor work and documentation • Valid Driving license Competencies On the personality level we believe you have/are: • Motivated by teamwork, communication with other parts of the organization as well as being service-minded, • Structured and independent • Flexible, as unplanned overtime can occur • Open to travel • A significant understanding of and commitment to the highest standard of health and safety in the work environment • Ability to climb a wind turbine and perform tough physical work in heights as well as in various weather conditions, Good physical condition and can handle heavy lifts and work on heights What we offer Working as a Service Technician at Vestas is your opportunity to leverage your electrical, mechanical, and hydraulic experience while being part of the global leader in sustainable energy solutions. In Vestas, we have installed more wind power than anyone else, and the maintenance and service activities you do every day will contribute to us maintaining the best possible quality vital for both our customers and the very planet. We offer technical training programs to ensure that Vestas' Service Technicians are some of the most technically accomplished people in the industry. We take elaborate measures to keep you safe - at Vestas, we operate by a safety-first principle and working safely is a condition of employment. Additional information We look forward to receiving your application as soon as possible, as we will be reviewing applications on a rolling basis. To apply for this opportunity please submit your resume in English. Our commitment to a fair hiring. At Vestas, we evaluate all candidates solely based on their professional experience, education, and relevant skills. To support a fair recruitment process, we kindly ask that you remove any photos, dates of birth or graduation, gender pronouns, marital status, or other personal information not relevant to the role before submitting your CV/resume. Your CV/resume should focus on your professional and educational background, along with the necessary contact details (email and phone number). We train our hiring teams in inclusive evaluation and regularly review process outcomes to ensure fairness. DEIB Statement At Vestas, we recognize the value of diversity, equity, and inclusion in driving innovation and success. We strongly encourage individuals from all backgrounds to apply, particularly those who may hesitate due to their identity or feel they do not meet every criterion.&nbsp;</p><p><strong>Desired Candidate Profile</strong></p><p>Experience or a degree within electricity, mechanics, or hydraulics, and is still eager to develop your skills within these areas. Good knowledge in English is a plus. Computer knowledge, as the tasks include regular reporting and communication through various systems. Experienced in handling different tools or systems to monitor work and documentation. Valid Driving license. Motivated by teamwork, communication with other parts of the organization as well as being service-minded. Structured and independent. Flexible, as unplanned overtime can occur. Open to travel. A significant understanding of and commitment to the highest standard of health and safety in the work environment. Ability to climb a wind turbine and perform tough physical work in heights as well as in various weather conditions, Good physical condition and can handle heavy lifts and work on heights.</p>

Responsibilities:<br>Prepare and execute comprehensive manufacturing plans to achieve production targets and delivery schedules. Develop and manage the manufacturing budget, ensuring all operations are within approved financial parameters. Lead the implementation of Lean Six Sigma and automation initiatives to improve efficiency, quality, and safety. Present performance metrics, project updates, and strategic recommendations to senior leadership. Monitor key performance indicators (KPIs) and production metrics to ensure operational excellence and identify areas for improvement. Develop and champion a robust continuous improvement strategy in partnership with the management team and key business stakeholders. Lead Kaizen events, value stream mapping, and other Lean activities to identify and eliminate waste. Drive the adoption of automation and Industry 4.0 technologies to enhance manufacturing capabilities. Perform root cause analysis of production issues and implement effective corrective actions. Lead the manufacturing budgeting cycle and ensure all operations remain within approved financial parameters. Provide accurate reporting on budget performance, expenditures, and variances to senior leadership. Develop and implement cost optimization strategies that enhance profitability and mitigate financial and operational risks. Conduct regular financial reviews and forecasting to anticipate budget needs and adjust resource allocation accordingly. Develop, implement, and maintain standard operating procedures (SOPs) for all manufacturing processes. Ensure compliance with all company policies, as well as legal and regulatory requirements. Promote a culture of innovation and best practice in all manufacturing activities Regularly review and update policies and procedures to reflect operational changes, regulatory updates, and industry best practices.<br>Required Skills and Qualifications:<br>Minimum 10-12 years of experience in a manufacturing environment, with at least 5 years in a management role. Proven experience in a high-mix, low-volume (HMLV) manufacturing setting is essential. Strong knowledge of Lean Six Sigma methodologies and a proven track record of driving continuous improvement. Experience with automation, IoT, and Industry 4.0 technologies is highly desirable. Previous experience in the Oil and Gas equipment manufacturing industry is preferred. Proficient in MS Office Suite and ERP/MRP systems. Bachelor’s degree in Industrial Engineering, Manufacturing Engineering, Mechanical Engineering, or a related technical field. An MBA or Master's degree is a plus. Certified Lean Six Sigma Black Belt / Green Belt is highly preferred. PMP or other project management certification is advantageous.

Company Description Legend Motor Works is an independent premium automotive service center in Riyadh, specializing in maintenance, diagnostics, repair, and restoration of luxury and exotic vehicles. Founded on a passion for engineering excellence, the company offers dealership-level quality combined with the personalized attention of an independent specialist. Highly experienced technicians work with leading global automotive brands using professional diagnostic tools, manufacturer-recommended procedures, and genuine or OEM components. From routine servicing to complex mechanical and electrical issues, every vehicle is handled with precision, integrity, and respect. Legend Motor Works is dedicated to preserving the legacy and performance of each automobile it services.<br>Role Description The Service Advisor role is a full-time, on-site position based in Riyadh, Saudi Arabia. The Service Advisor will be responsible for welcoming clients, understanding their vehicle concerns, and accurately documenting service requests. Daily tasks include preparing repair orders, coordinating with technicians, explaining recommended work and associated costs, and keeping clients updated on repair status and timelines. The role also involves reviewing completed work with clients, managing aftersales follow-up, and ensuring a seamless, premium service experience aligned with the standards of luxury and exotic brands. The Service Advisor will work closely with the workshop team to balance customer expectations, technical requirements, and efficient scheduling.<br>Qualifications<br> Strong customer-oriented skills, including Customer Satisfaction and Customer-focused Service, with a commitment to delivering a premium client experience. Proven Customer Service abilities, including handling inquiries, resolving concerns, and maintaining long-term client relationships. Excellent Communication skills, both verbal and written, to clearly explain technical information, service options, and costs. Experience in Aftersales functions, such as follow-up calls, service reminders, and coordination of ongoing maintenance plans. Previous experience as a Service Advisor or in a similar role within automotive service, preferably with luxury or premium brands. Basic technical understanding of vehicle systems to interpret diagnostics and translate technician findings for clients. Strong organizational and time-management skills, with the ability to handle multiple vehicles and client requests simultaneously. Proficiency in using service management or dealership management software and standard office applications. Fluency in English; proficiency in Arabic is highly beneficial. Relevant vocational training or certification in automotive, business, or a related field is preferred.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a highly experienced <b>Customer Relationship Manager (CRM) – Strategic Accounts</b> to strengthen and expand our relationships with key clients across Saudi Arabia. This leadership role is ideal for a seasoned professional with extensive experience in project management, engineering consulting, business relationship management, and strategic account development within the process industries.</p><p><b>&nbsp;</b></p><p><b>Role Overview</b></p><p>The Customer Relationship Manager will serve as the primary interface between Ingenero and its strategic customers, ensuring exceptional client engagement, identifying growth opportunities, supporting project execution, and driving long-term customer satisfaction.</p><p>The role requires strong commercial acumen, technical understanding of process engineering services, and the ability to work collaboratively with engineering, project delivery, and business leadership teams.</p><p><b>Key Responsibilities</b></p><p><b>Strategic Customer Relationship Management</b></p><ol><li>Develop and manage long-term relationships with strategic clients across Saudi Arabia.</li><li>Serve as the primary point of contact for executive stakeholders and project leadership teams.</li><li>Understand customer business objectives and align Ingenero's engineering and digital solutions accordingly.</li><li>Build trusted advisor relationships with Operations, Maintenance, Reliability, Engineering, and Plant Management teams.</li><li>Drive customer satisfaction and long-term account growth.</li></ol><p><b>Project Coordination &amp; Delivery Support</b></p><ol><li>Coordinate closely with engineering and project delivery teams to ensure successful execution of client projects.</li><li>Monitor project progress, client expectations, milestones, and commercial commitments.</li><li>Facilitate communication between customers and internal technical teams.</li><li>Identify project risks and proactively support issue resolution.</li><li>Ensure timely delivery while maintaining high customer satisfaction.</li></ol><p><b>Business Development &amp; Account Growth</b></p><ol><li>Identify opportunities for repeat business, cross-selling, and upselling engineering and digital solutions.</li><li>Support sales teams in expanding existing customer accounts.</li><li>Participate in proposal development, commercial discussions, and contract negotiations.</li><li>Develop strategic account plans to maximize customer value and revenue growth.</li><li>Maintain a healthy opportunity pipeline within assigned accounts.</li></ol><p><b>Stakeholder Management</b></p><ol><li>Build relationships with senior management, project owners, EPC contractors, consultants, and operating companies.</li><li>Lead executive reviews, customer meetings, and business presentations.</li><li>Represent Ingenero during client workshops, conferences, and industry events.</li><li>Act as the voice of the customer within the organization.</li></ol><p><b>Market Intelligence</b></p><ol><li>Monitor industry trends, customer requirements, and competitor activities.</li><li>Identify emerging opportunities within Oil &amp; Gas, Petrochemical, Chemical, Refining, and Industrial Manufacturing sectors.</li><li>Provide strategic market insights to leadership.</li></ol><p><b>Internal Collaboration</b></p><ol><li>Work closely with Process Engineering, Mechanical, Reliability, Digital Transformation, Asset Integrity, and Project Management teams.</li><li>Ensure alignment between customer expectations and project execution.</li><li>Drive collaboration across multiple business functions to deliver integrated engineering solutions.</li></ol><p><b>Required Qualifications</b></p><ol><li>Bachelor's Degree in Mechanical, Chemical, Process, or Industrial Engineering.</li><li>MBA or equivalent management qualification preferred.</li><li>20+ years of experience in Customer Relationship Management, Strategic Account Management, Project Management, Business Development, or Engineering Consulting.</li><li>Strong experience working within Process Engineering, EPCM, PMC, Engineering Consulting, or Industrial Services organizations.</li></ol><p><b>Preferred Industry Experience</b></p><p>Experience serving clients in:</p><ol><li>Oil &amp; Gas</li><li>Petrochemicals</li><li>Chemicals</li><li>Refineries</li><li>LNG</li><li>Energy</li><li>Fertilizers</li><li>Power</li><li>Industrial Manufacturing</li></ol><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Required Skills &amp; Competencies&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</b></p><ol><li>Strategic Account Management</li><li>Customer Relationship Management (CRM)</li><li>Project Management</li><li>Engineering Consulting</li><li>Business Development</li><li>Commercial Negotiation</li><li>Executive Stakeholder Management</li><li>Cross-functional Leadership</li><li>Contract Management</li><li>Proposal Development</li><li>Team Collaboration</li><li>Risk Management</li><li>Strong Presentation &amp; Communication Skills</li></ol><p><b>Preferred Experience</b></p><ol><li>Existing relationships with major EPC contractors, or leading industrial clients.</li><li>Experience managing large engineering consulting or EPCM accounts.</li><li>Exposure to Digital Transformation, Asset Management, Reliability Engineering, AI-enabled industrial solutions, or Process Optimization.</li><li>Experience handling multi-million-dollar engineering projects.</li></ol><p><b>What Success Looks Like</b></p><ol><li>High customer satisfaction and retention.</li><li>Growth of strategic accounts through repeat business and new opportunities.</li><li>Successful execution of complex engineering projects.</li><li>Strong executive relationships with key clients.</li><li>Increased revenue from existing customers.</li><li>Effective collaboration between customers and internal project teams.</li><li>Contribution to Ingenero's long-term growth across Saudi Arabia and the GCC region.</li></ol><p><b>Travel Requirements</b></p><ol><li>Willingness to travel extensively across Saudi Arabia and the GCC region.</li><li>Occasional international travel for customer meetings, project reviews, and industry events.</li></ol><p><br></p></div>

Purpose:<br>To support quality assurance functions across incoming, in-process, and final inspection activities for Electrical Submersible Pump (ESP) components and assemblies in Alhkorayef Petrolum. This role will also monitor and manage calibration of inspection and measuring equipment to ensure compliance with internal and industry quality standards.<br><br>Responsibilities:<br>Perform dimensional and visual inspection of raw materials and machined components upon receipt. Review and verify documentation including material test certificates (MTCs), certificates of conformity (CoCs), and inspection reports. Conduct in-process inspections during machining and assembly to ensure compliance with drawings and specifications. Inspect critical features such as impeller/diffuser clearances, stack lengths, rotor fits, keyways, and other tolerance-critical areas. Validate and record results of first article inspections (FAI) as per control plans. Support assembly and test operations by inspecting sub-assemblies and final ESP pump assemblies. Review and verify cleanliness, marking, and serialization of components prior to final release. Final inspect completed units and ensure conformance to inspection and test plans (ITPs). Identify and report non-conformances, and assist in root cause investigation and containment actions. Maintain accurate inspection records and ensure traceability of all inspected items. Monitor calibration due dates for inspection, measuring, and test equipment (IMTE). Coordinate internal or external calibration activities and ensure updated calibration certificates are available. Verify measuring tools are within calibration before use and properly stored after use. Support internal and external audits by providing inspection records, calibration data, and traceability documents. Work closely with production, engineering, and quality teams to resolve quality issues and drive continuous improvement.<br><br>Required Skills and Qualifications:<br>Diploma in Mechanical, Production, or Manufacturing Engineering (or equivalent).0 -2 years of experience in a quality inspection role. Proficient in using inspection tools such as calipers, micrometers, bore gauges, height gauges, and thread gauges. Strong understanding of engineering drawings, tolerances, and GD&T. Basic knowledge of ISO 9001, API Q1, and relevant oil & gas manufacturing standards. Familiarity with calibration systems and measurement traceability. Professional English written and verbal communication skills. Good understanding of ISO9001 QMS requirements and implementations. Computer literacy is required. Familiar with Non Destructive Equipment/Testing (NDE/NDT) is a plus.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at USCareers@airbus.com</span></p><br><br><br><ul><li>Notice: Know Your Rights: Workplace Discrimination is Illegal</li><li>Notice: Pay Transparency Nondiscrimination (English)</li><li>Aviso: Transparencia en el Pago No Discriminación&nbsp;(Spanish)</li></ul><br><br><p><span><b><b>Job Description:</b></b></span></p><br><br><p><span><b>Airbus Americas, Inc </b>is looking for a <b>Quality Supervisor</b> to join our team based in <b>Mobile, AL</b>.</span></p><br><br><p><br>As the Quality Supervisor you will d<span>irect, supervise and coordinate all operational Quality activities in Single Aisle Flowline in defined area of responsibility. Manages, motivates and develops the Quality team including Lead Inspectors. Responsible for ensuring the Airbus Quality Standards of the entire A/C based on the defined inspection dossier and in accordance with the POA relevant regulations.&nbsp;</span></p><br><br><p><span><b>Meet the Team:</b></span></p><br><br><p><span>Our Engineers at the Airbus U.S. Manufacturing facility take our aircraft from concept to customer delivery – working with production teams on every aspect of assembly from managing technical information, quality control, maintenance tasks and health &amp; safety – along flowlines and flightlines. Join our team and watch our aircraft come to life.</span></p><br><br><p><span><b>Your Working Environment:</b></span></p><br><br><p><span>On ‘Airbus Way’ you will find the Airbus U.S. Manufacturing Facility for commercial aircraft. Opened at the Mobile Aeroplex at Brookley in 2015, the facility produces A320 Family aircraft and added a second product line for the A220 in 2019. The facility, which strengthens the U.S. aerospace industry, is part of Airbus’ strategy to enhance its global competitiveness by meeting the growing needs of its customers in the United States and beyond.</span></p><br><br><p><span><b>How We Care for You:</b></span></p><br><br><ul><li><span><b>Financial Rewards:</b> Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”)</span></li><li><span><b>Work/Life Balance: </b>Paid time off including personal time, holidays and a generous paid parental leave program.</span></li><li><span><b>Health &amp; Welfare: </b>Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages.&nbsp;</span></li><li><span><b>Individual Development: </b>Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility.</span></li></ul><br><p><span><b>Your Challenges:</b></span></p><br><br><p><span><b>Lead Team &amp; Act as Delegate: 40%</b></span></p><br><br><ul><li><span>Lead and develop the Flowline Quality Line Side Inspection Team, ensure that the Level 3 qualification of inspection personnel is in accordance with the Airbus Qualification requirements.&nbsp;</span></li><li><span>Ensure together with Operations the competence- and qualification management of Operations and Quality Focal Point for the production delegated Inspectors in area of responsibility</span></li><li><span>Ensure that the Aircraft production and the milestone FOT is in compliance with the Quality, cost and lead-time targets of FAL-USA.</span></li><li><span>Ensure that NCs are managed and drumbeat from creation to closure, that Andon’s, and Ultimate Andon’s are priority for all within the MFT.&nbsp;</span></li><li><span>Responsible focal point for all Customer presentations and customer interactions.&nbsp;</span></li><li><span>Conducts training to insure optimum performance in job procedures and methods of lead employees and other assigned technicians. Ensure compliance with applicable rules and regulations/company policies and procedures relating to workmanship.</span></li><li><span>Represent Flowline to other departments and levels of the FAL. Interface with other departments to facilitate problem resolution and process improvement.</span></li><li><span>Conduct periodic performance evaluations, makes recommendations regarding personnel actions and collaborates with Quality Manager in employee communication and communicating on personnel actions.</span></li><li><span>Ensure that employees are in compliance with OSHA, safety and environmental regulations.</span></li><li><span>Collaborate with the procurement function to ensure the acquisition of necessary consumable materials as well as tools and other equipment.</span></li><li><span>Plan and control workload of all assigned employees to ensure on time delivery per approved schedule. Coordinate with and obtain support from the assigned team.</span></li></ul><ul><li><span>Risk Analysis/Containment: 40%</span></li></ul><ul><li><span>Risk mitigation of quality escapes endangering the aircraft built and or product safety, launch of immediate corrective actions&nbsp;</span></li><li><span>Ensure that all technical inspections in the production process of the aircraft are carried out to the POA standards, inspection plans and attested.&nbsp;</span></li><li><span>Responsible Focal Point for all external EASA Audits in area responsibility</span></li><li><span>Able to provide efficient feed-back analysis and trend to management.&nbsp;</span></li><li><span>Work within a MFT to resolve Quality issues and ensure constant feedback loops with MAP, ME, QCM, AQCM and FCM</span></li><li><span>Supervisor 1 is expected to be proficient in Airbus policies which are processes (i.e. PPV, First Validation, Intervention, MMI, Quality Authorizations and others.)</span></li></ul><br><p><span><b>Improve Processes/Operations: 20%</b></span></p><br><br><ul><li><span>Ensure that all EASA-POA regulatory requirements are implemented and used in the Flowline Product Quality and manufacturing organization.</span></li><li><span>Support and project manage the deployment &amp; implementation of sustainable improvement projects and standardize way of working like Quality Excellence - Able to lead projects at times</span></li><li><span>Define and implement work level processes based on the experience and recommendations from existing FAL operations. Identifies opportunities and implements adaptations for local application of such ideas.</span></li><li><span>Responsible for Continuous Improvement including leading activities and document progress.</span></li><li><span>Fully proficient in AOS and has the ability to own a QPS Brick and implement it into the Station</span></li><li><span>Lead projects or be a main contributor such as new station implementation, introduction of new versions</span></li></ul><p><br><span><b>Your Boarding Pass:</b></span></p><br><br><p><span>Required Education&nbsp;</span></p><br><br><ul><li><span>A Bachelors' degree in Aeronautical, Industrial or Manufacturing Engineering or an equivalent combination of education and experience is preferred.&nbsp;</span></li><li><span>A minimum of 5 years of experience in Aviation (Manufacturing Engineering, Assembly Processes, Production method, etc.) or equivalent experience.</span></li><li><span>3 or more years of Leadership experience in Aviation is highly preferred.</span></li><li><span>Experience with Quality / Logistics rules in aviation manufacturing.&nbsp;</span></li><li><span>Experience as a member and leader of an international team.&nbsp;</span></li><li><span>Experiencing leading a team in a similar position is highly desirable&nbsp;</span></li><li><span>Knowledge Aircraft manufacturing process with strong emphasis on Structure/Mechanical/ Paint Tasks&nbsp;</span></li><li><span>Knowledge of health safety and environmental regulation&nbsp;</span></li><li><span>Requires ability to communicate effectively in oral and written form with internal customer&nbsp;</span></li><li><span>Must be able to use GSuite &amp; SAP&nbsp;</span></li><li><span>Ability to work in different production management systems&nbsp;</span></li><li><span>High degree of flexibility and initiative&nbsp;</span></li><li><span>Demonstrably effective communication skills on different levels, a structured way of working and the ability to deal with a volume of complex information.</span></li><li><span>Experience as a member and leader of an international team.&nbsp;</span></li><li><span>Work with the principles, practices, methods and tools used in aircraft manufacturing&nbsp;</span></li><li><span>Work with non-conformities and design query notes&nbsp;</span></li><li><span>Work with quality managing system&nbsp;</span></li><li><span>Knowledge Aircraft manufacturing process with strong emphasis on Structure/Mechanical/ Paint Tasks&nbsp;</span></li><li><span>Knowledge of health safety and environmental regulation&nbsp;</span></li><li><span>Requires ability to communicate effectively in oral and written form with internal customer&nbsp;</span></li><li><span>Must be able to use Microsoft office &amp; SAP Preferred&nbsp;</span></li></ul><ul><li><span>Ability to speak English is preferred.</span></li><li><span>Requires ability to communicate effectively in oral and written form&nbsp;</span></li><li><span>Must be able to use Microsoft office, Google &amp; SAP</span></li></ul><br><p><span><b>Physical Requirements:</b></span></p><br><br><ul><li><span><b>Onsite 100%</b></span></li><li><span><b>Vision: </b>able to see and read computer screen and other electronic equipment with screens, able to read documents, reports and engineering drawings.</span></li><li><span><b>Hearing:</b> able to hear to participate in conversations in person and via teleconference or phone and to hear sounds on production floor including safety warnings or alarms.</span></li><li><span><b>Speaking</b>: able to speak in conversations and meetings, deliver information and participate in communications.</span></li><li><span><b>Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors):</b> able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts.</span></li><li><span><b>Carrying: </b>able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs.</span></li><li><span><b>Lifting:</b> able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs.</span></li><li><span><b>Pushing / Pulling:</b> able to push and pull small office furniture and some equipment and tools.</span></li><li><span><b>Sitting:</b> able to sit for long periods of time in meetings, working on computer.</span></li><li><span><b>Squatting / Kneeling: </b>able to squat or kneel to retrieve or replace items stored on low shelving.</span></li><li><span><b>Standing:</b> able to stand for discussions in offices or on production floor.</span></li><li><span><b>Travel:</b> able to travel independently and at short notice.</span></li><li><span><b>Walking (include routine walking such as to a shared printer to retrieve documents):</b> able to walk through office and production areas including uneven surfaces.</span></li></ul><br><p><span><b>Eligibility:&nbsp;</b></span></p><br><br><p><span>Eligible for employment in the US without sponsorship.&nbsp;</span></p><br><br><p><span>A full job description will be provided to candidates who progress to the interview stage or any candidate upon request.</span></p><br><br><br><br><p>This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.</p><br><br><br><p><span><b><b><b><b>Company:</b></b></b></b></span></p><br><br>Airbus Americas, Inc.<br><p><b>Employment Type:</b></p><br><br>US - Direct Hire<br><p><b>Experience Level:</b></p><br><br>Professional<br><p><b>Remote Type:</b></p><br><br>On-site<br><p><b>Job Family:</b></p><br><br>Leadership &lt;JF-FA-EM&gt;<p>------</p><br><br><p>------</p><br><br>Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment.<br><p>By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.<br>Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.</p><br><br><p><span>Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to&nbsp;</span><span>emsom@airbus.com.</span></p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>Fire Protection – Safety Engineer</p><p>We are looking for a Safety / Fire Protection Engineer to join our team in Al Khobar, Saudi Arabia.</p><p><br></p><p>Requirements:</p><ul><li>MUST HAVE Bachelor’s degree in Safety Engineering or Fire Protection Engineering.</li><li>Fresh graduates and entry-level candidates are welcome to apply.</li><li>Saudi and non-Saudi candidates are welcome to apply.</li><li>Good communication and willingness to learn.</li><li>Knowledge of fire protection and safety standards is an advantage.</li></ul><p><br></p><p>Location: Al Khobar, Eastern Province</p><p>Employment Type: Full-time</p><p>Workplace: On-site</p><p>To apply: Please submit your updated CV through LinkedIn.</p>

<p>Senior Structural Engineer</p><p>We are seeking expressions of interest for an experienced Senior Structural Engineer to support an upcoming aviation / airport project in Saudi Arabia.</p><p>Requirements</p><ul><li>Minimum 10 years of total professional experience.</li><li>Direct professional experience on aviation / airport projects.</li><li>Bachelor's or Master's degree in Structural Engineering.</li><li>Valid SCE (Saudi Council of Engineers) registration.</li></ul><p>Preferred</p><ul><li>Previous experience on aviation / airport projects in Saudi Arabia.</li></ul><p>Candidates must demonstrate direct experience on aviation / airport projects. Experience limited to airport access roads or general road projects alone will not be considered sufficient airport experience.</p>

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About the Role</h3> <p style="margin:0 0 12px; ************;">Al-Ayuni Investment and Contracting Company is seeking an <strong style="font-weight:700;">Engineer II Production Operations</strong> to join their team in Riyadh, Saudi Arabia. This full-time role involves supporting daily production operations for asphalt plants, crushers, and related facilities, ensuring adherence to production plans, equipment usage, quality standards, and HSE guidelines.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Role Purpose</h3> <p style="margin:0 0 12px; ************;">The primary purpose of this position is to provide essential support for production operations, focusing on meeting targets and maintaining operational efficiency. The Engineer II will contribute to the smooth execution of daily activities and coordinate with various teams to ensure continuous workflow and quality output.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Support the execution of daily asphalt, crusher, and concrete plant operations in line with approved plans and schedules.</li> <li style="margin:0 0 6px;">Monitor plant performance, material consumption, and production data through routine checks to maintain efficiency.</li> <li style="margin:0 0 6px;">Coordinate production schedules with the Production Manager and Mining Engineer to ensure smooth workflow and material availability.</li> <li style="margin:0 0 6px;">Assist in coordinating maintenance activities during breakdowns and shutdowns to minimize downtime.</li> <li style="margin:0 0 6px;">Support product quality by adhering to process parameters and coordinating with the quality assurance team.</li> <li style="margin:0 0 6px;">Prepare and submit daily and shift production reports using available production data.</li> <li style="margin:0 0 6px;">Support plant operators and helpers during shift operations to maintain workflow.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Compliance and Safety</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Adhere to organizational policies and procedures to ensure compliance and foster a productive work environment.</li> <li style="margin:0 0 6px;">Implement and uphold safety and security protocols to protect employees and company assets.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Required Experience</h3> <p style="margin:0 0 12px; ************;">Candidates should possess <strong style="font-weight:700;">2-5 years of relevant experience</strong> in production operations, preferably within asphalt, crusher, or concrete plant environments.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Additional Information</h3> <p style="margin:0 0 12px; ************;">This is a full-time position based in Riyadh, Saudi Arabia. The salary for this role will be disclosed during the interview process.</p>

<p>Dear Friend,</p><p><br>Greetings from... <strong>Zyagulf Information Technology, UAE</strong></p><p><br><strong>About us:</strong></p><p><strong>Zyagulf Information Technology</strong> is a global IT consulting and solutions provider that offers dynamic end to end business solutions to various enterprises with high quality of services in emerging technologies and an impressive command of industry expertise and leading technology capabilities with fully integrated on-site, off-site, offshore and blended delivery methodologies.</p><p><br><strong>Zyagulf</strong> recruits <strong>NOC Engineer - L1/L2 Support </strong>with 2 to 4/4 to 6 years of Data Center infrastructure and/or Telecom Connectivity network experience</p><p>to one of our reputed clients located in Riyadh KSA.</p><p><br><strong>Requirement:</strong></p><p><strong>Employment: </strong>Direct Hire by our client</p><p><strong>Qualification</strong>: Any relevant IT degree</p><p><strong>Work Location</strong>: Riyadh KSA</p><p><strong>Experience</strong>: Min 2 to 4 years</p><p><strong>Skills:</strong> &nbsp;Network Operations Center (NOC) Engineer – Level 1 (L1), DCIM, NMS, OSS, Sub‑Sea NMS, IPOPs, IX, OTN, Ciena 6200 (MCP)</p><p><strong>Joining Time</strong>: ASAP/ immediate / 15 to 20 days</p><p><strong>Domain: </strong>Data<strong> </strong>Center infrastructure and/or Telecom Connectivity networks</p><p><strong>Nationality:&nbsp; </strong>Any</p><p><strong>Preferred : &nbsp;Already in KSA (Transferable IQAMA)</strong></p><p><strong>Benefits: Family Status + Medical Insurance (Self + Spouse + Up to 3 Children)</strong></p><p><br></p><p><strong>Job Description:</strong></p><p><strong>Role :&nbsp; Network Operations Center (NOC) Engineer – Level 1 (L1)</strong></p><p>The NOC L1 Engineer is responsible for 24x7 monitoring, incident detection, basic troubleshooting, and escalation support for Data Center and Connectivity infrastructure. The role focuses on real‑time surveillance, ticket management, coordination with stakeholders, and operational reporting to ensure service availability and SLA compliance.</p><p><strong>&nbsp;</strong></p><p><strong>Key Responsibilities</strong></p><p><strong>Monitoring & Surveillance</strong></p><ul><li><p>Monitor infrastructure health and alarms through DCIM systems (Data Centers) and NMS/OSS platforms (Connectivity).</p></li><li><p>Perform continuous surveillance of network elements including Sub‑Sea NMS, IPOPs, IX, OTN, and related systems.</p></li><li><p>Identify faults, anomalies, and service degradations proactively.</p></li></ul><p><strong>Incident & Trouble Ticket Management</strong></p><ul><li><p>Create, assign, dispatch, and track trouble tickets based on alarms and fault notifications.</p></li><li><p>Ensure incidents are logged accurately with proper classification and priority.</p></li><li><p>Escalate issues to L2/L3 teams as per defined escalation matrices and SLAs.</p></li></ul><p><strong>Troubleshooting & Fault Management</strong></p><ul><li><p>Conduct initial troubleshooting, fault isolation, and remote fault management based on available tools and procedures.</p></li><li><p>Support equipment failure investigations using NMS data and dashboards.</p></li></ul><p><strong>Coordination & Communication</strong></p><ul><li><p>Liaise with internal teams, service providers, vendors, international carriers, and consortium NOCs as required.</p></li><li><p>Provide timely updates to stakeholders during incidents and follow established communication protocols.</p></li></ul><p><strong>Reporting & Documentation</strong></p><ul><li><p>Prepare and maintain reports on Trouble Tickets, Root Cause Analysis (RCA), fault trends, and operational dashboards.</p></li><li><p>Ensure accurate documentation of incidents, actions taken, and resolutions.</p></li></ul><p><strong>Required Skills & Qualifications</strong></p><ul><li><p>Basic understanding of Data Center infrastructure and/or Telecom Connectivity networks.</p></li><li><p>Familiarity with DCIM, NMS, and OSS systems.</p></li><li><p>Hands-on in Ciena 6200 (MCP)</p></li><li><p>Knowledge of ticketing systems and incident management processes.</p></li><li><p>Strong monitoring, analytical, and communication skills.</p></li></ul><p>Willingness to work in 24x7 shift operations.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>The candidate who is selected for the project should be able to join in short notice.</p>

<p>Position Title: Electrical Technician Reports to:Lead Electrical Engineer / Electrical Engineer / Electrical Supervisor Function:Maintenance Job Location:Al Madinnah Al Manwarah, Sidra JOB PURPOSE: To carry out maintenance, installation, overhauling and modification activities on plant s electrical machinery and equipment in accordance with standard maintenance procedures, HSE guidelines and quality standards to attain effective functionality and reliability. KEY ACCOUNTABILITIES: Description Electrical Maintenance Carry out required daily electrical maintenance work and routine preventative electrical maintenance work according to set schedule and ACWA NOMAC procedures to facilitate continuous operations. Monitor the physical condition of all equipment in assigned plant and report non-conformances to Electrical Engineer / Electrical Supervisor to facilitate effective maintenance of all ACWA NOMAC facilities as per set Quality/ HSE standards. Respond to electrical failures and implement corrective actions in adherence with procedures and guidelines to reduce downtime and maximize functionality of equipment. Troubleshoot using necessary tools which include diagnosis, repairing and testing circuit or wiring faults; locating faults in cables to validate that all connection points and cables are capable of withstanding capacity voltages. Diagnose causes of electrical malfunction or failure of operational equipment such as transformers, motors, relays, switches and control and monitoring devices and take corrective measures in collaboration with Electrical Engineer / Electrical Supervisor. Read and understand technical manuals, wiring diagrams etc., and apply the knowledge to carry out maintenance and troubleshooting tasks, to prepare for the electrical maintenance to equipment in the assigned area. Align, adjust and calibrate equipment according to specifications and to maintain records of repairs, calibrations and tests Inventory Check the necessary stock levels of spare parts to support effective inventory control Documentation Update the maintenance logbook and record details of work carried out including defaults, problems, various findings and conditions of all equipment to ensure timely availability of information and organized referencing Continuous Improvement Contribute in the identification and implementation of change initiatives, programmes and projects in line with the organization s standards. Policies, Processes, Systems &amp; Procedures Adhere to all relevant organizational and departmental policies, processes, standard maintenance procedures and instructions so that work is carried out to the required standard and in a consistent manner. Health, Safety, Security &amp; Environment Adhere to all relevant health, safety, security and environmental procedures, instructions and controls so that the safety of employees and environmental compliance can be guaranteed. Related Assignments Perform any other duties which the line manager may require to be carried out.</p><p><strong>Desired Candidate Profile</strong></p>QUALIFICATIONS, EXPERIENCE, &amp; SKILLS: Minimum Qualifications: A technical certificate / Associate s Diploma in Electrical maintenance. Minimum Experience: 3-5 years experience in electrical maintenance as a technician in installation, maintenance and repair of electrical equipment and installations in a plant environment. Skills: Practical Knowledge of relevant plant equipment Awareness of HSE &amp; quality standards Teamwork and effective collaboration skills ISO awareness/working knowledge is preferred

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Remote Junior AI Engineer – Computer Vision Location : Remote Employment Type : Full-time (8 hours) Remotely Experience Level : Junior (3+ years) InnovationTeam is a forward-thinking technology company that delivers advanced AI and data-driven solutions across multiple industries.<br> We are currently seeking a Junior AI Engineer – Computer Vision to join our AI engineering team.<br> As a Junior Computer Vision Engineer at InnovationTeam , you will be responsible for designing, developing, and deploying vision-based AI systems for real-world, production environments.<br> You will work closely with cross-functional teams to build scalable image and video analytics solutions.<br> This position requires strong expertise in computer vision, deep learning, and software engineering.<br> The ideal candidate is technically strong, self-driven, and experienced in taking AI models from research to production.<br> At InnovationTeam , we foster a culture of innovation, collaboration, and technical excellence, offering an environment where Junior engineers can make a meaningful impact.<br> Role Overview We are seeking a skilled AI Engineer with a strong focus on Computer Vision to develop, optimize, and deploy vision-based AI solutions.<br> The role involves working on real-world image and video analytics problems and delivering production-ready AI systems.<br> · Work on practical, production-grade Computer Vision solutions.<br> · Access to GPU infrastructure and modern AI tooling.<br> · Collaborative, engineering-focused work environment.<br> · Opportunities for growth and advanced AI exposure.<br> · Competitive compensation package.<br> · Develop and train Computer Vision models for image and video analysis.<br> · Implement solutions for object detection, image classification, segmentation, and tracking.<br> · Prepare and manage datasets, including data cleaning, labelling, and augmentation.<br> · Optimize models for GPU performance, inference speed, and scalability.<br> · Deploy AI models into production using APIs and containerized services.<br> · Integrate Computer Vision models with broader AI and analytics platforms.<br> · Collaborate with software engineers, data scientists, and product teams.<br> · Maintain documentation and ensure code quality and reproducibility.<br> Required Skills &amp; Qualifications · Minimum 2 years of hands-on experience in AI / Machine Learning/Deep learning with a focus on Computer Vision.<br> · Master’s degree in computer science, software Engineering, Artificial Intelligence, Engineering, or a related field.<br> · Strong knowledge of Computer Vision concepts and algorithms.<br> · Practical experience with CNN-based models and modern CV architectures.<br> · Proficiency in Python and common ML/CV libraries (PyTorch or TensorFlow, OpenCV).<br> · Experience with object detection and segmentation frameworks (e.<br>g., YOLO, Detectron2).<br> · Understanding of model evaluation, metrics, and performance optimization.<br> · Experience deploying models in cloud or on-prem environments.<br> · Familiarity with Docker and basic MLOps practices.<br> · Excellent English communication skills (written and spoken).<br> Nice to Have · Experience with video analytics or real-time inference.<br> · Exposure to Vision Transformers or multimodal AI.<br> · Experience with GPU-based training and inference.<br> · Knowledge of cloud platforms (OCI, AWS, Azure, or GCP).<br> · Background in domains such as healthcare, smart cities, or industrial AI.<br></span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h3>نبذة عن الدور</h3><p>تبحث شركة شلفا لإدارة المرافق عن <strong>فني إنشاءات</strong> للانضمام إلى فريقها في أبها، عسير. يتولى شاغل الوظيفة مهام فنية تتعلق بإنشاء الأبنية، بما في ذلك جمع العينات ومطابقة المواصفات وتقدير الكميات اللازمة للمواد والعمالة. هذا الدور بدوام كامل ويتطلب خبرة تتراوح بين سنتين وخمس سنوات.</p><h3>المهام والمسؤوليات الرئيسية</h3><ul><li>مساعدة مهندس الأبنية في إعداد خطة وبرنامج العمل للمعاينة ومتابعة التنفيذ وضبط الجودة.</li><li>أخذ عينات من تربة موقع البناء ومواد الإنشاء والخلطات الإسمنتية وإرسالها للمختبر ومطابقة المواصفات الفنية.</li><li>تفقد العمل في إنشاء الأبنية أثناء الإنشاء وبعده للتأكد من مطابقة المواصفات والمعايير المحددة.</li><li>المشاركة في قياس العمل المنجز بالتنسيق مع المهندس المشرف على المشروع.</li><li>إعداد وتقديم تقارير العمل الدورية وتوثيقها وحفظها بشكل منظم.</li></ul><h3>المؤهلات والخبرات المطلوبة</h3><ul><li>خبرة عملية تتراوح بين <strong>سنتين وخمس سنوات</strong> في مجال الإنشاءات أو مجال ذي صلة.</li><li>القدرة على أداء الواجبات الفنية المتعلقة بإنشاء الأبنية.</li><li>معرفة بجمع العينات من تربة الموقع والمواد الإنشائية وإرسالها للمختبر.</li><li>القدرة على مطابقة المواصفات الفنية للمواد والعمل المنجز.</li><li>مهارة في تقدير كميات المواد والعمالة اللازمة للمشاريع.</li></ul><h3>بيئة العمل</h3><p>يعمل فني الإنشاءات ضمن فريق شركة شلفا لإدارة المرافق في مدينة أبها بمنطقة عسير. الوظيفة بدوام كامل وتتطلب التواجد في مواقع العمل حسب الحاجة لضمان سير المشاريع بكفاءة.</p><h3>تفاصيل إضافية</h3><p>الراتب لهذا الدور لم يتم الكشف عنه، وسيتم تحديده بناءً على الخبرة والمؤهلات. هذه فرصة للانضمام إلى فريق متخصص والمساهمة في مشاريع إنشاءات متنوعة في المنطقة.</p>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركة الخليج واسيا للمقاولات عن <strong >فني إنشاءات</strong> للانضمام إلى فريقها في الجبيل، المنطقة الشرقية. يركز هذا الدور على أداء الواجبات الفنية المتعلقة بإنشاء الأبنية، بما في ذلك جمع العينات ومطابقة المواصفات وتقدير الكميات. يتطلب الدور خبرة تتراوح من 0 إلى سنة واحدة.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >مساعدة مهندس الأبنية في إعداد خطة وبرنامج العمل للمعاينة ومتابعة التنفيذ وضبط الجودة.</li> <li >أخذ عينات من تربة موقع البناء ومواد الإنشاء والخلطات الإسمنتية وإرسالها للمختبر لمطابقة المواصفات.</li> <li >تفقد العمل في إنشاء الأبنية أثناء الإنشاء وبعده للتأكد من مطابقة المواصفات والمعايير المطلوبة.</li> <li >المشاركة في قياس العمل المنجز بالتنسيق المباشر مع المهندس المشرف.</li> <li >إعداد وتقديم تقارير العمل الدورية وتوثيقها وحفظها بشكل منظم.</li> </ul> <h3 >المؤهلات والخبرة</h3> <ul > <li >خبرة عملية تتراوح من <strong >0 إلى سنة واحدة</strong> في مجال الإنشاءات أو ما يتصل بها.</li> <li >القدرة على أداء الواجبات الفنية المتعلقة بإنشاء الأبنية.</li> <li >معرفة بجمع العينات من تربة الموقع والمواد الإنشائية وإرسالها للمختبر.</li> <li >القدرة على مطابقة المواصفات وتقدير كميات المواد والعمالة اللازمة.</li> </ul> <h3 >بيئة العمل</h3> <p >هذه الوظيفة بدوام كامل ومقرها في الجبيل، المنطقة الشرقية. يعمل فني الإنشاءات ضمن فريق متخصص، ويكون مسؤولاً عن دعم العمليات الإنشائية لضمان الجودة والامتثال للمواصفات.</p> <h3 >تفاصيل إضافية</h3> <p >الراتب لهذه الوظيفة غير معلن وسيتم تحديده بناءً على الخبرة والمؤهلات خلال عملية التوظيف.</p> <h3 >التقديم</h3> <p >إذا كنت تستوفي المتطلبات المذكورة أعلاه، ندعوك للتقديم لهذه الفرصة في شركة الخليج واسيا للمقاولات.</p></div>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركة ناصر سعيد الهاجري وشركاه للمقاولات عن <strong >فني إنشاءات</strong> للانضمام إلى فريقها في الجبيل، المنطقة الشرقية. يركز هذا الدور بدوام كامل على أداء الواجبات الفنية المتعلقة بإنشاء الأبنية، بما في ذلك جمع العينات ومطابقة المواصفات وتقدير الكميات.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >مساعدة مهندس الأبنية في إعداد خطة وبرنامج العمل الخاص بالمعاينة ومتابعة التنفيذ وضبط الجودة.</li> <li >أخذ عينات من تربة موقع البناء ومواد الإنشاء والخلطات الإسمنتية، وإرسالها إلى المختبر لمطابقة المواصفات.</li> <li >تفقد العمل في إنشاء الأبنية أثناء وبعد عملية الإنشاء لضمان مطابقة جميع المواصفات والمعايير المطلوبة.</li> <li >المشاركة في قياس العمل المنجز بالتنسيق المباشر مع المهندس المشرف على المشروع.</li> <li >إعداد وتقديم تقارير العمل الدورية، وتوثيقها وحفظها بشكل منظم لضمان سهولة الرجوع إليها.</li> </ul> <h3 >المؤهلات والخبرة</h3> <ul > <li >خبرة تتراوح من 0 إلى 1 سنة في مجال الإنشاءات أو مجال ذي صلة.</li> <li >القدرة على أداء الواجبات الفنية المتعلقة بإنشاء الأبنية.</li> <li >القدرة على جمع العينات من تربة الموقع والمواد الإنشائية.</li> <li >القدرة على تقدير كميات المواد والعمالة اللازمة للمشاريع.</li> </ul> <h3 >بيئة العمل</h3> <p >يعمل فني الإنشاءات ضمن فريق شركة ناصر سعيد الهاجري وشركاه للمقاولات في مشاريعها بالجبيل، المنطقة الشرقية، في بيئة عمل ديناميكية تتطلب الدقة والالتزام بمعايير الجودة والسلامة.</p> <h3 >نوع الوظيفة</h3> <p >هذه الوظيفة بدوام كامل، وتقدم فرصة للمرشحين لتطوير مهاراتهم في قطاع المقاولات والإنشاءات.</p> <h3 >التقديم</h3> <p >للمهتمين بالانضمام إلى فريقنا، يرجى تقديم طلباتكم للنظر فيها.</p></div>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركة الخليج واسيا للمقاولات عن <strong >فني إنشاءات</strong> للانضمام إلى فريقها في الجبيل، المنطقة الشرقية. يركز هذا الدور بدوام كامل على دعم مهندسي الإنشاءات في المهام الفنية المتعلقة بإنشاء الأبنية، بما في ذلك جمع العينات ومطابقة المواصفات وتقدير الكميات. يتطلب الدور خبرة تتراوح من 0 إلى سنة واحدة.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >مساعدة مهندس الأبنية في إعداد خطة وبرنامج العمل للمعاينة ومتابعة التنفيذ وضبط الجودة.</li> <li >أخذ عينات من تربة موقع البناء ومواد الإنشاء والخلطات الإسمنتية وإرسالها للمختبر.</li> <li >مطابقة مواصفات المواد والإنشاءات مع المعايير المطلوبة.</li> <li >تفقد العمل في إنشاء الأبنية أثناء الإنشاء وبعده للتأكد من مطابقة المواصفات.</li> <li >المشاركة في قياس العمل المنجز بالتنسيق مع المهندس المشرف.</li> <li >إعداد وتقديم تقارير العمل وتوثيقها وحفظها بشكل منهجي.</li> </ul> <h3 >المؤهلات والخبرات</h3> <ul > <li >خبرة تتراوح من <strong >0 إلى سنة واحدة</strong> في مجال الإنشاءات أو ما يتصل به.</li> <li >القدرة على جمع العينات من تربة الموقع والمواد الإنشائية.</li> <li >فهم جيد لمواصفات المواد الإنشائية والقدرة على مطابقتها.</li> <li >مهارات تقدير كميات المواد والعمالة اللازمة للمشاريع.</li> </ul> <h3 >بيئة العمل</h3> <p >يعمل فني الإنشاءات ضمن فريق شركة الخليج واسيا للمقاولات في الجبيل، المنطقة الشرقية. يتطلب الدور العمل بدوام كامل في بيئة ديناميكية تركز على جودة الإنشاءات والالتزام بالمواصفات الفنية.</p> <h3 >معلومات إضافية</h3> <ul > <li >نوع الوظيفة: <strong >دوام كامل</strong>.</li> <li >الراتب: <strong >غير معلن</strong>.</li> </ul> <h3 >التقديم</h3> <p >ندعو المهتمين الذين يستوفون المتطلبات المذكورة أعلاه للتقديم على هذا الدور في شركة الخليج واسيا للمقاولات.</p></div>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركة ناصر سعيد الهاجري وشركاه للمقاولات عن <strong >فني إنشاءات</strong> للانضمام إلى فريقها في الجبيل بالمنطقة الشرقية. يركز هذا الدور بدوام كامل على أداء الواجبات الفنية المتعلقة بإنشاء الأبنية، بما في ذلك جمع العينات ومطابقة المواصفات وتقدير الكميات.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >مساعدة مهندس الأبنية في إعداد خطة وبرنامج العمل الخاص بالمعاينة ومتابعة التنفيذ وضبط الجودة.</li> <li >أخذ عينات من تربة موقع البناء والمواد الإنشائية والخلطات الإسمنتية، وإرسالها إلى المختبر لمطابقة المواصفات.</li> <li >تفقد الأعمال الإنشائية للأبنية أثناء وبعد عملية الإنشاء لضمان مطابقتها للمواصفات والمعايير المطلوبة.</li> <li >المشاركة في قياس الأعمال المنجزة بالتنسيق المباشر مع المهندس المشرف.</li> <li >إعداد وتقديم تقارير العمل الدورية، وتوثيقها وحفظها بشكل منظم.</li> </ul> <h3 >المؤهلات والخبرات</h3> <ul > <li >خبرة تتراوح من 0 إلى 1 سنة في مجال الإنشاءات أو ما يعادله.</li> <li >القدرة على أداء الواجبات الفنية المتعلقة بإنشاء الأبنية.</li> <li >مهارات جيدة في جمع العينات وتحليلها.</li> </ul> <h3 >المهارات المطلوبة</h3> <ul > <li >الدقة في مطابقة المواصفات الفنية.</li> <li >القدرة على تقدير كميات المواد والعمالة اللازمة للمشاريع.</li> <li >مهارات التواصل الفعال والعمل ضمن فريق.</li> <li >الالتزام بمعايير الجودة والسلامة في مواقع العمل.</li> </ul> <h3 >بيئة العمل</h3> <p >هذا الدور بدوام كامل ويقع في الجبيل، المنطقة الشرقية. سيعمل فني الإنشاءات ضمن فريق متخصص في شركة ناصر سعيد الهاجري وشركاه للمقاولات.</p> <h3 >معلومات إضافية</h3> <p >الراتب لهذا المنصب سيتم تحديده بناءً على الخبرة والمؤهلات، ولن يتم الكشف عنه في هذه المرحلة.</p></div>

Job Summary:The Planning Officer coordinates and support projects related to the operation, assists in providing planning and evaluation, ensuring that developing and existing projects are effective and in conformance with the overall goals and objectives of the organization. Assists in analyzing expenses and identify opportunities to save cost. This role also assists in ensuring that the projects are handled on time and on budget by overseeing the project planning, inventory, cost control, and project management.<br>Job Responsibilities Assist in preparing the planning’s data to be incorporated to the submittal of Project Progress and ensures submission of weekly/monthly reports in coordination with Project Manager and Site Quantity Surveyor. Prepare the planning reports such as preparation of manpower requirements for the project, preparation of material procurement reports in accordance with approved program. Maintain files and to carry out data input as required the Planning Engineers Assist in developing and utilizing innovative tools and techniques for planning process. Ensure all planning processes adhered to established procedures and regulations. Monitor day-to-day work progress for a project and provide accurate weekly and monthly reports by swiftly communicating potential progress delays or project slippages. Continually make comparisons between planned progress and actual progress and report any differences to Planning Engineer. Ensure accuracy of tracking and updating information required for weekly, biweekly and monthly reports in order to monitor and report any variances from planned productivities and targets and ensure compliance as per the contract schedule Provide feedback to the Planning Manager/Planning Engineer on subcontractor’s schedule ‘s status. Prepare schedules Updates Progress monitoring and Reporting Input progress updates and other information in Excel spreadsheets/any software related. Work closely with others involved in a project and provide current status updates to vendors, managers and other concerned personnel. Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies<br>Job Knowledge & Skills:Solid knowledge of the organizational and document planning techniques. Outstanding knowledge of various planning tools and techniques. Understanding how to scope a project and create work schedules to ensure completion within the timeframeand budget allotted is a key duty of planning engineers Knowledge on planning related software ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.<br>Experience:Fresh Graduates are encouraged to apply!<br>Education:Bachelor's degree in civil engineering or architecture engineering