Mechanical Design Engineer Jobs in Saudi

Job Summary<br>We are seeking a dynamic and technically skilled Pre-Sales Engineer to drive solution design, customer engagement, and business growth across the Kingdom of Saudi Arabia. The role focuses on delivering end-to-end presales support for enterprise networking solutions, including HPE Aruba, Cisco, and Huawei.<br>The ideal candidate will work closely with sales, vendors, and partners to understand customer requirements, design scalable and cost-effective solutions, and support the full sales cycle—from opportunity identification and technical presentations to proposal development and deal closure.<br>This position requires strong expertise in networking technologies, excellent communication skills, and the ability to translate complex technical requirements into business-driven solutions.<br>Key Responsibilities Act as a trusted technical advisor to customers, partners, and internal sales teams across networking solutions (Aruba, Cisco, Huawei) Lead solution design, sizing, and Bill of Quantities (BoQ) preparation aligned with customer requirements Support partner enablement, product positioning, and technical training to strengthen market capabilities Collaborate closely with vendor presales teams to develop competitive and tailored solutions Engage customers to gather requirements, conduct technical assessments, and propose optimized architectures Prepare and respond to RFIs, RFPs, and RFQs with high-quality technical and commercial documentation Develop proposals, quotations, and P&L analysis ensuring profitability and compliance with company standards Work closely with the Sales Director and Business Unit Head to drive pipeline growth, conversion, and profitability Deliver technical presentations, demos, and solution workshops to customers and partners Support account penetration strategies and identify upsell/cross-sell opportunities Maintain strong relationships with key stakeholders and ensure high levels of customer satisfaction Provide technical support during the sales cycle closure phase, ensuring successful deal execution<br>Required Skills & Expertise Strong experience in Networking Technologies:Routing & Switching Wireless (Wi-Fi) solutions Network Security IP Telephony / Collaboration Hands-on knowledge of HPE Aruba, Cisco, and Huawei solutions Solid understanding of IT Infrastructure and Low Current Systems Experience in solution design, BoQ creation, and technical proposal writing Strong presentation, communication, and stakeholder management skills Ability to translate customer requirements into scalable, cost-effective solutions Commercial awareness with understanding of pricing, margins, and deal structuring<br>Qualifications & Experience Bachelor’s Degree in IT, Computer Science, Engineering, or a related field Minimum 2+ years of experience in Pre-Sales Engineering or Technical Sales Proven experience in the KSA market Certifications (preferred):Cisco (CCNA / CCNP / CCDP or equivalent) Aruba / Huawei certifications are a plus Fluent in Arabic and English (written and spoken)

Job Summary<br><br>We are seeking an experienced Site MEP Engineer to oversee and coordinate all Mechanical, Electrical, and Plumbing (MEP) works throughout the construction lifecycle. The successful candidate will ensure that all MEP installations are executed in accordance with approved drawings, project specifications, applicable codes, quality standards, and project schedules while coordinating with consultants, contractors, and multidisciplinary teams.<br><br>Key Responsibilities<br><br> Supervise and monitor all MEP works on-site to ensure compliance with approved drawings, specifications, and contract requirements. Review MEP shop drawings, material submittals, method statements, and technical documentation. Coordinate MEP activities with civil, structural, architectural, and other project disciplines to prevent clashes and ensure smooth project execution. Conduct regular site inspections to verify installation quality, workmanship, and compliance with project standards. Monitor contractor performance and ensure MEP works are completed according to project schedules and milestones. Resolve technical issues and provide engineering solutions to maintain project progress. Ensure compliance with local regulations, international codes, health and safety requirements, and QA/QC procedures. Review and witness testing, commissioning, and functional performance of MEP systems. Prepare and review inspection requests (IRs), testing reports, snag lists, punch lists, and close-out documentation. Participate in coordination meetings and provide technical support, progress reports, and recommendations. Review as-built drawings and verify completed installations prior to project handover. Evaluate technical variations, change orders, and site modifications when required. Maintain accurate documentation of inspections, approvals, testing records, and site activities. Support the successful commissioning and handover of all MEP systems<br><br>Requirements<br><br>Qualifications<br><br> Bachelor's degree in Mechanical Engineering, Electrical Engineering, or MEP Engineering. Minimum 10+ years of experience in supervising MEP works on construction projects. Experience in commercial, residential, industrial, or infrastructure projects. Strong knowledge of HVAC, plumbing, fire protection, electrical power, lighting, low-current systems, and building services. Familiarity with local and international building codes, MEP standards, and engineering best practices. Professional engineering registration or relevant accreditation is preferred. <br><br>Technical Skills<br><br> Proficiency in Auto CAD, Revit MEP, Navisworks, and Microsoft Office. Ability to review coordinated MEP drawings, BIM models, shop drawings, and technical submittals. Knowledge of testing, commissioning, QA/QC procedures, and inspection processes. Experience with project management and document control software is an advantage. <br><br>Core Competencies<br><br> Strong MEP coordination and site management skills. Excellent communication and stakeholder management. Strong technical and analytical problem-solving abilities. Leadership and multidisciplinary team coordination. Attention to detail and commitment to quality. Time management and ability to work under pressure. Strong reporting, documentation, and organizational skills

About the role:Seeking an experienced Elevator Maintenance Engineer / Supervisor with minimum 4 years of progressive, successful experience in Elevator Company to prepare, ensure, and control implementation and maintenance plans of Mitsubishi in order to deliver projects within the allocated budget, quality and safety standards.<br>Key responsibilities:Plan weekly/monthly maintenance schedule and the required manpower for upcoming projects. Coordinate with foremen the arrangement of all necessary tools and materials required for projects as needed by technicians. Follow-up with maintenance clients with regards to old and new contracts to continue to provide maintenance services. Ensure timely requisitions of spare parts to keep sufficient amount in stock. Re-adjust elevators under maintenance as per Mitsubishi standard. Assign the work to route technicians and circulate information to field personnel regarding relevant new techniques in quality assessment of maintenance work. Record and issue tools/equipment and spare parts required for projects. Help clients understand the required spare parts and identify type of service they require. Prepare spare parts quotation and monthly maintenance report to the maintenance manager for his review and necessary action. Carry out annual equipment audit and conduct semi-annual physical inventory of spare parts in coordination with storekeeper. Control all maintenance and spare parts manuals and update whenever required. Create quality & safety inspection plans and Introduce in-process auditing/corrective measures and conduct quality assurance reviews throughout all projects' phases. Ensure every employee is provided PPE (Personal Protective Equipment) and maintain sufficient amount of protective equipment for ongoing projects. Conduct safety awareness sessions on a regular basis or as required Ensure implementation of quality checks of factory and local materials and suggest improvements within quality standards and company policies. Conduct audits at job sites to ensure quality work and constantly coordinate with quality control for installation standards and procedures. Monitor technicians' activities as per work schedules and quality standards. Contribute to the identification of opportunities for continuous improvement of systems, processes and practices taking into account leading practices, improvement of business processes, cost reduction and productivity improvement. Supervise, guide and assist direct reports to perform their daily activities in accordance with the policies and procedures. Skills:Minimum Bachelor's degree in Mechanical or Electrical Engineering or related field At least 4 years of experience in equipment maintenance with any brand. Must be computer literate with good understanding of MS Office. Strong communication skills in Arabic and English.

Pico Play is seeking a skilled Project Engineer professional to plan, coordinate, supervise, and control site activities to ensure projects are delivered safely, on time, within quality standards, and in line with the approved construction program.<br>Job description:<br>Planning & Work Management: Develop short-term and detailed look-ahead plans aligned with the overall project program. Plan and sequence daily activities and allocate workers and supervisors accordingly. Conduct daily morning briefings and toolbox talks prior to commencing works. Monitor progress and ensure activities remain aligned with the approved schedule. Immediately report any delays, deviations, or risks to the Project Manager/Director. Plan material and equipment deliveries in coordination with procurement to ensure timely availability. Escalate procurement or delivery delays to senior management without delay. Project Coordination:Coordinate with main contractors, subcontractors, consultants, and stakeholders. Attend and lead daily site meetings with quality and site teams to review ongoing and upcoming works. Ensure all required clearances and handovers are received prior to commencing works. Issue required handovers/clearances to relevant parties upon completion of works. QA/QC Management:Plan, execute, and record all MIRs (Material Inspection Requests) and WIRs (Work Inspection Requests) in accordance with project requirements and program of works. Coordinate closely with the QA/QC team to ensure inspections and documentation are completed on time. Maintain all inspection logs and quality records up to date. Ensure no activity starts without approved documentation and inspection clearance. Material & Resource Management:Manage material storage, site logistics, and deliveries. Monitor manpower allocation and review manpower histograms to ensure adequate resource deployment. Track daily labor and subcontractor productivity. HSE Responsibilities:Ensure all site activities comply with approved HSE procedures. Do not commence any work without approved documentation (Method Statement, Risk Assessment, Lifting Plan, etc.), to be discussed and agreed with the Safety Manager in advance. Ensure all access equipment is safe and operated by trained and licensed personnel. Ensure toolbox talks and safety briefings are arranged regularly with workers and the safety team as required. Report accidents, incidents, or unsafe practices immediately.<br>Qualifications:<br>Bachelor’s degree in engineering (Civil / Mechanical / Electrical or relevant discipline). Minimum 4 years of site experience in construction projects. Strong understanding of construction sequencing, QA/QC procedures, and HSE standards. Ability to manage multiple stakeholders and subcontractors. Proficient in project documentation systems (Aconex, Procore, etc.). Strong communication and reporting skills

Job Summary Saudi Conduit Coating & Contracting Co. (S3C) is seeking a Technical Sales Engineer to support and grow its PTFE (Polytetrafluoroethylene) solutions business line. This role combines strong technical expertise with commercial acumen to identify opportunities, engage clients, and deliver tailored PTFE solutions across key industrial sectors in Saudi Arabia. The ideal candidate will have hands-on experience in PTFE applications and a proven track record in technical sales within oil & gas, petrochemicals, or industrial sectors. Key Responsibilities Technical Sales & Business Development Promote and sell PTFE lining and coating solutions to clients across oil & gas, petrochemical, water, and industrial sectors Identify new business opportunities and expand S3C’s presence in the PTFE market Develop and maintain strong relationships with key clients and stakeholders Technical Expertise & Support Understand and present PTFE product specifications, capabilities, applications, and limitations Review client requirements, technical drawings, and project specifications Provide technical consultation and propose fit-for-purpose solutions Support clients during project execution, including site visits and technical discussions Client Engagement Conduct regular client visits, including site inspections and technical meetings Build and maintain an active network within major entities such as Saudi Aramco, SABIC, EPC contractors, and industrial operators Represent S3C in client meetings, presentations, and negotiations Sales Performance Prepare technical and commercial proposals Lead negotiations and close deals Achieve assigned sales targets and contribute to revenue growth Maintain accurate sales records and pipeline reporting Market Intelligence Monitor market trends and competitor activities, including companies such as ARCONI S. A, Crane Chem Pharma & Energy, Midad Lining & Sealing Co., and Innovative Development Est. Provide feedback to management on market needs and product development opportunities Qualifications & Requirements Education Bachelor’s degree in Mechanical Engineering, Chemical Engineering, or a related field Experience5+ years of experience in technical sales, preferably in PTFE, coatings, or industrial materials Experience working with Aramco, SABIC, petrochemical plants, refineries, or water utilities is highly preferred Technical Skills Strong understanding of PTFE manufacturing, installation, and testing processes Ability to interpret engineering drawings and specifications Knowledge of corrosion protection, lining systems, or industrial coatings is a plus Sales & Soft Skills Excellent communication and presentation skills Strong negotiation and persuasion abilities Proven sales track record in industrial or energy sectors Ability to build and maintain long-term client relationships Key Competencies Customer-focused with strong problem-solving skills Self-driven and results-oriented Ability to balance technical detail with commercial objectives Strong field presence and willingness to travel for site visits

Job Summary<br>We are seeking a dynamic and technically skilled Pre-Sales Engineer to drive solution design, customer engagement, and business growth across the Kingdom of Saudi Arabia. The role focuses on delivering end-to-end presales support for enterprise networking solutions, including HPE Aruba, Cisco, and Huawei.<br>The ideal candidate will work closely with sales, vendors, and partners to understand customer requirements, design scalable and cost-effective solutions, and support the full sales cycle—from opportunity identification and technical presentations to proposal development and deal closure.<br>This position requires strong expertise in networking technologies, excellent communication skills, and the ability to translate complex technical requirements into business-driven solutions.<br>Key Responsibilities Act as a trusted technical advisor to customers, partners, and internal sales teams across networking solutions (Aruba, Cisco, Huawei) Lead solution design, sizing, and Bill of Quantities (BoQ) preparation aligned with customer requirements Support partner enablement, product positioning, and technical training to strengthen market capabilities Collaborate closely with vendor presales teams to develop competitive and tailored solutions Engage customers to gather requirements, conduct technical assessments, and propose optimized architectures Prepare and respond to RFIs, RFPs, and RFQs with high-quality technical and commercial documentation Develop proposals, quotations, and P&L analysis ensuring profitability and compliance with company standards Work closely with the Sales Director and Business Unit Head to drive pipeline growth, conversion, and profitability Deliver technical presentations, demos, and solution workshops to customers and partners Support account penetration strategies and identify upsell/cross-sell opportunities Maintain strong relationships with key stakeholders and ensure high levels of customer satisfaction Provide technical support during the sales cycle closure phase, ensuring successful deal execution<br>Required Skills & Expertise Strong experience in Networking Technologies:Routing & Switching Wireless (Wi-Fi) solutions Network Security IP Telephony / Collaboration Hands-on knowledge of HPE Aruba, Cisco, and Huawei solutions Solid understanding of IT Infrastructure and Low Current Systems Experience in solution design, BoQ creation, and technical proposal writing Strong presentation, communication, and stakeholder management skills Ability to translate customer requirements into scalable, cost-effective solutions Commercial awareness with understanding of pricing, margins, and deal structuring<br>Qualifications & Experience Bachelor’s Degree in IT, Computer Science, Engineering, or a related field Minimum 2+ years of experience in Pre-Sales Engineering or Technical Sales Proven experience in the KSA market Certifications (preferred):Cisco (CCNA / CCNP / CCDP or equivalent) Aruba / Huawei certifications are a plus Fluent in Arabic and English (written and spoken)

Egis is an international player active in architecture, consulting, construction engineering and mobility services. We create and operate intelligent infrastructures and buildings that respond to the climate emergency and contribute to more balanced, sustainable and resilient territorial development. Operating in 100 countries, Egis puts the expertise of its 19,500 employees at the service of its clients and develops cutting-edge innovations accessible to all projects. Through its wide range of activities, Egis is a key player in the collective organisation of society and the living environment of citizens all over the world.<br><br>With 3,500 employees across 8 countries in the Middle East, Egis has delivered over 700 complex development projects, stimulating economic growth and enhancing quality of life. Ranked among the top ten firms in the Middle East by Engineering News Record (ENR), Egis is committed to sustainable development. The Group’s operations in the Middle East are built on strategic acquisitions and a deep understanding of local market conditions. Egis has long history of providing comprehensive engineering, consulting, and project management services makes it a trusted partner for regional governments, investors, and developers.<br><br><br><br>Job Description<br><br>We are seeking a Planning Engineer to be responsible for developing, maintaining, and monitoring project schedules to ensure timely project delivery. The role involves coordinating with project teams, tracking progress, analyzing schedule performance, and identifying potential delays.<br><br>Key Responsibilities:<br><br>Develop and update project schedules using Primavera P6 or MS Project. Monitor progress and analyze critical path activities. Prepare progress reports, look-ahead plans, and schedule updates. Identify schedule risks and recommend corrective actions. Coordinate planning activities with engineering, procurement, and construction teams. Review contractor schedules and support project controls activities. <br>Skills & Qualifications:<br><br>Bachelor's degree in Civil Engineering or a related field. Proficiency in Primavera P6 and scheduling techniques. Knowledge of CPM scheduling, progress measurement, and project controls. Strong analytical and communication skills. <br><br><br>Qualifications<br><br> <br><br>Bachelor's degree in Civil Engineering, or a related field Minimum 5 years of professional experience in planning engineering. Demonstrated expertise in master planning, strategic planning, and feasibility studies Strong analytical and problem-solving skills with the ability to evaluate complex scenarios and recommend data-driven solutions Proficiency in technical report writing and the ability to create clear, compelling presentations for diverse audiences Solid understanding of project management principles, resource allocation, and budget management Knowledge of regulatory compliance requirements and risk assessment methodologies Excellent organizational and time management skills with the ability to manage multiple priorities simultaneously Strong verbal and written communication skills in English

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Sr. Quality Control Engineer holds the responsibility for maintaining updated site activities on a daily basis, recording all quality observations on site. Duties shall include but not limited to ensuring that the contractor complies with the project s specifications in his submitted activities, manage and evaluate all processes and ensure efficient quality control within the projects; provide support to the construction team and to other Quality Control Specialists, and ensuring all work is in compliance with the contract requirements. With us, you can. Apply today.</p><p>Review and check vendors prequalification s Method statements, Inspection Test Plans (ITP), equipment data, material samples and/or manufacturers for compliance with contract drawings and specifications and project s quality system. Ensure that all requirements of the applicable specifications and drawings are complied with and report on deficiency corrections on-site. Establish and maintain robust procedures to develop standard documentation for the project s quality control and assurance; center and propose any improvements deemed necessary.</p><p>Conduct Inspections and Audits Plan and execute regular inspections and audits to verify compliance with quality standards and specifications. Implement the QA procedures and coordinate QC work with other technical disciplines to ensure safe and seamless management with all trades and activities. Coordinate testing and inspection of offsite materials storage and testing. Inspect all materials for compliance to submittals and drawings. Monitor the performance of all control activities and tests on building components. Direct, supervise and coordinate inspection/engineering QC activities. Troubleshoot and resolve problems relating to the activity quality control. Identify non-conformances, lead its investigation with the relevant departments; and evaluate contractors submitted corrective &amp; preventive action plan.</p><p>Participate in the development of the Commissioning plan, roles, and responsibilities. Implement a commissioning plan. Participate in and conduct Quality meetings with the contractor, Construction team and suppliers. Coordinate with Engineering team to resolve all construction issues, RFI s and conflicts. Review, assist and facilitate Daily Report process; keep an updated daily report; prepare and submit weekly and monthly quality reports. Maintain an up to date knowledge on various architecture engineering processes &amp; techniques and coordinate with other departments for the technical activities of projects'</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's Degree and 15+ years of relevant experience. Demonstrate knowledge of production, construction techniques, procedures, codes, and standards across all disciplines. Thorough understanding of ISO 9001. Competent in the identification and management of problems and trends through defect analysis and workgroups. Requires knowledge of statistical principles and conducts statistical analysis. Intermediate skills with Microsoft Office Suite.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>WSP in the Middle East are looking for a competent, passionate and driven Senior/Principal Engineer (ICT &amp; Security) to step into the role of Acting BTS Lead on some of the region s most high-profile projects.If you bring deep expertise in security &amp; ICT systems, a strong technical foundation, and the leadership skills to guide manage multidisciplinary teams across mega-scale, complex programs, we want to hear from you. Bachelor s or master s degree in electrical engineering, ICT, Systems Engineering, or a related field. Minimum 10 years of proven experience in ICT and security engineering with a track record of successfully leading large-scale or complex projects. Strong background in ICT and security systems, with proven experience on mega-scale projects in the region. Leadership capabilities to guide teams, manage stakeholders, and deliver challenging project conditions. BICSI certification preferred; additional ICT/Security-design related professional certificates are an advantage. Relevant engineering or ICT degree; advanced certifications a plus. Imagine a better future for you and a better future for us all. Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself? With us, you can. Apply today.</p><p>Act as BTS Lead, overseeing end-to-end design, development, and implementation of ICT and security systems for mega-scale projects. Lead, guide and review technical design of ICT and security infrastructure, ensuring compliance with global and local standards (BICSI, TIA, MOI,..etc) and client requirements. Provide technical guidance, mentorship and design assurance for multidisciplinary teams. Manage the integration of ICT and security systems across complex project environments. Coordinate and manage multiple stakeholders, including clients, contractors, and internal teams, to ensure alignment and smooth project delivery. Ensure project delivery, technical compliance, and high-quality documentation.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s or master s degree in electrical engineering, ICT, Systems Engineering, or a related field. Minimum 10 years of proven experience in ICT and security engineering with a track record of successfully leading large-scale or complex projects. Strong background in ICT and security systems, with proven experience on mega-scale projects in the region. Leadership capabilities to guide teams, manage stakeholders, and deliver challenging project conditions. BICSI certification preferred; additional ICT/Security-design related professional certificates are an advantage. Relevant engineering or ICT degree; advanced certifications a plus.</p><p></p></section>

This position is listed on behalf of a partner company, who manages all applications and next steps. Our partner is looking for a Middle/Senior Golang Engineer based in Saudi Arabia.<br><br>As a Middle/Senior Golang Engineer, you’ll build and evolve high-performance backend services powering modern fintech and Web3 payment products. You’ll work extensively with Go, blockchain infrastructure, smart contracts, and EVM-compatible networks. The role covers everything from API and microservice development to transaction processing, cross-chain operations, and secure financial data management. You’ll help design reliable systems capable of handling sensitive payment and fund flows with high availability and low latency. Working closely with product and engineering teams, you’ll contribute to solutions spanning blockchain, payments, and third-party integrations. You’ll also have the opportunity to strengthen production reliability through monitoring, debugging, and observability. This is a fully remote, international engineering environment where technical ownership, security, and scalability are highly valued.<br><br>Accountabilities<br><br>Design, develop, and maintain backend services in Go, with a focus on high-performance and low-latency processing for Web3 and card payment systems. Build and maintain smart contract integrations, including interactions with on-chain data and transaction flows between blockchain networks and application services. Develop and manage APIs connecting blockchain infrastructure, payment systems, and external services. Implement secure and efficient transaction-processing workflows, including asynchronous confirmations and sequential transaction orchestration. Develop services supporting cross-chain token swaps, stablecoin transactions, cryptocurrency transfers, and fund management across multiple blockchain networks. Implement robust security measures for sensitive financial and user data, including encryption, authentication, authorization, and secure data transmission. Build and maintain reliable Go microservices deployed in containerized production environments. Monitor, troubleshoot, debug, and improve live systems, with particular attention to payment, transaction, and fund flows. Work with databases to ensure data consistency, integrity, and performance across financial transaction workflows. Contribute to cloud infrastructure, CI/CD pipelines, deployment processes, and production engineering practices. Collaborate with other engineers and stakeholders to deliver scalable, secure, and maintainable fintech and blockchain solutions. Continuously improve system reliability, performance, observability, and engineering standards.<br><br>Requirements<br><br>3+ years of professional experience developing applications with Go, including at least 1 year working on Web3 or blockchain-related projects. Strong understanding of blockchain fundamentals, particularly Ethereum and EVM-compatible networks. Practical experience with smart contracts, Ethereum nodes such as Geth or Infura, blockchain data, and cryptocurrency wallet integrations. Understanding of financial transaction lifecycles within Web3 ecosystems, including token transfers, stablecoins, cryptocurrency transactions, and wallet management. Strong experience designing and developing RESTful APIs and g RPC services, including knowledge of API security and integration best practices. Experience working with relational databases such as MySQL, with a strong focus on consistency, integrity, and performance. Hands-on experience with containerized applications and Kubernetes, including deploying and managing Go-based microservices in production. Solid understanding of cryptographic principles and experience implementing secure storage and transmission of sensitive data. Familiarity with cloud platforms such as AWS, GCP, or Azure. Experience with CI/CD pipelines and automated delivery processes for Go applications. Strong troubleshooting and analytical skills, particularly when working with complex financial or blockchain transaction flows. Good written and spoken English for technical documentation and collaboration; Ukrainian or Russian communication skills are advantageous. Ability to work independently in a remote environment while collaborating effectively with distributed engineering teams.<br><br>Nice-to-have Skills<br><br>Understanding of zk-rollups, sidechains, and Layer 2 scaling technologies. Experience with monitoring, observability, and service-health tooling for high-volume or financial transaction systems. Experience with Infrastructure-as-Code tools such as Terraform. Knowledge of automated deployment strategies for blockchain and Web3 services.<br><br>Benefits<br><br>Fully remote working opportunity with flexible working hours. Option to work from home or an office environment where applicable. Competitive B2B contract arrangement. Home office allowance. Premium rates for the company's products. Virtual share options scheme available after the probation period. Health insurance coverage after the probationary period.20 business days of paid annual leave. Paid sick leave. Birthday and work anniversary leave. Additional length-of-service holidays. Access to online events focused on learning, professional development, and team engagement. PE accounting support and assistance. Opportunity to work on innovative fintech, blockchain, and Web3 payment technologies in an international environment.<br><br>How Jobgether Works<br><br>We use an AI-powered matching process to ensure your application is reviewed quickly, objectively, and fairly against the role's core requirements. Our system identifies the top-fitting candidates, and this shortlist is then shared directly with the hiring company. The final decision and next steps (interviews, assessments) are managed by their internal team.<br><br>We appreciate your interest and wish you the best!<br><br> Why Apply Through Jobgether?<br><br>Data Privacy Notice: By submitting your application, you acknowledge that Jobgether will process your personal data to evaluate your candidacy and share relevant information with the hiring employer. This processing is based on legitimate interest and pre-contractual measures under applicable data protection laws (including GDPR). You may exercise your rights (access, rectification, erasure, objection) at any time.<br><br>We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br>Reimagine What’s Possible <br><br>Purpose<br><br>The Senior Process Engineer – HYCO provides senior-level technical leadership for ongoing plant operations and projects—from concept development through commissioning and start-up—and leads asset management and productivity initiatives across all BHIG operating facilities in the Region. The role coordinates technical activities between site-based engineers and operations teams, mentors junior process engineers, and ensures safe, reliable, efficient and cost-effective production of hydrogen, syngas, CO and CO₂.<br><br>Nature & Scope<br><br>Reporting to the BHIG Engineering Manager, the Senior Process Engineer – HYCO provides day-to-day operational and technical support to Regional Sites through systematic monitoring of plant performance to ensure that production, energy efficiency, and reliability targets are consistently achieved in a safe manner. As a senior technical authority, the incumbent acts as a subject-matter expert (SME) on HYCO process technology and mentors site-based process engineers.<br><br>The role identifies productivity opportunities, develops engineering solutions, and supports the project execution teams across multiple technologies: Air Separation Units (ASU), Hydrogen / Syngas (HYCO – SMR based), and CO₂ production. The incumbent may also support Air Products plant support teams in providing similar services to JV partners, equipment sales customers and new prospects.<br><br>This position interfaces with Air Products global, regional and local process / production engineers, Regional Operations team members, project and design engineering teams, process safety specialists, and other technical support personnel. The role helps implement the systems and measures required to meet BHIG's Middle East operational requirements, technical standards, quality processes and plant & equipment integrity programs.<br><br>The incumbent will coordinate and effectively utilize global operating and technical resources to support existing operations, new installations and modifications led by BHIG Project Engineering or by the Air Products Global Engineering & Manufacturing Organization. The position will help drive consistency in operations across the Middle East Region and contribute to the continuous improvement of productivity, reliability, quality, process safety, and cost-effectiveness of the plants—using BHIG and Air Products systems, tools, statistical techniques and Continuous Improvement methodologies. Developing and tracking plant performance and reliability KPIs is an integral part of the role.<br><br>Principal Accountabilities<br><br>Safety<br><br>Provide and maintain a safe work environment for self and others; demonstrate visible safety leadership. Participate in meetings with government departments responsible for safety, environmental, fire protection and public security oversight, and ensure timely implementation of applicable requirements within BHIG. Participate in major turnarounds and project activities, ensuring safety throughout execution. Coordinate employee safety committee meetings and programs and actively encourage employee participation and accountability in safety management programs.<br><br>Technical<br><br>Act as senior technical authority and subject-matter expert for HYCO process engineering across the Region; mentor and coach junior and site-based process engineers, and provide peer review on key engineering deliverables. Lead and provide technical support to regional teams for new installations, existing plant modifications, on-going operations, and continuous improvement and maintenance activities for BHIG, equipment sales and potential new customers. Support is delivered through site visits, remote phone / video support, or via the Process Intelligence Center (PIC). Ensure all activities comply with legal requirements, BHIG safety and technical standards. Provide technical support and safety leadership for Management of Change (MOC), Operational/Process Hazard Reviews (OPHR), PHA / HAZOP, LOPA and other process safety related initiatives in order to drive PSM compliance. Consult BHIG and Air Products process safety specialists as required. Provide process engineering leadership to drive asset performance, reduce operating costs and increase plant throughput by supporting: troubleshooting, plant efficiency studies, process safety, equipment reliability, advanced process control (APC), asset management, and productivity project identification, development and execution. Apply process statistics and data analytics (control charts, regression, capability analysis, multivariate analysis) to detect performance drift, quantify variability, prioritize improvement opportunities and validate the impact of implemented changes. Develop, maintain and validate steady-state and dynamic process simulation models in Aspen Plus (and associated Aspen suite tools) to support troubleshooting, performance benchmarking, debottlenecking, what-if studies, energy optimization, and revamp / new project evaluations. Provide expert technical support on heterogeneous catalyst systems used in HYCO / Hydrogen plants—including Hydrodesulfurization (HDS), ZnO sulfur absorbers, Pre-Reforming, Steam Methane Reforming (SMR), High-Temperature Shift (HTS), Low-Temperature Shift (LTS) and Methanation—covering activity / deactivation assessment, kinetic and equilibrium evaluation, poison management, life-cycle prediction, change-out strategy, vendor selection and performance auditing. Facilitate operational excellence through continuous improvement in plant productivity, reliability, quality and cost; lead improvements and ensure that best practices are deployed. Provide technical leadership in investigations and Root Cause Analyses (RCA) in order to identify and implement sustainable corrective and preventive actions. Provide technical support for Advanced Process Control (APC) and real-time optimization (RTO) initiatives. Monitor plant production daily, driving asset performance and ensuring daily targets are met to maximize profitability and customer satisfaction.<br><br>Operations<br><br>Provide process engineering support to operations in order to safely and reliably operate, SMR-based HYCO and CO₂ facilities in the Region, meeting customer expectations on safety, reliability, product quality and supply flexibility while remaining compliant with contractual requirements. Ensure that BHIG standards and Air Products global best practices for EH&S, productivity, reliability, quality and customer service are met. Provide technical guidance to commissioning teams, supporting commissioning, start-up and troubleshooting activities. Participate in the training of the Operations team up to plant commissioning, including catalyst loading, reduction / activation and start-up of SMR, Shift and Methanation reactors. Participate in developing the month-end close model and ensure alignment with commercial obligations for the BHIG Middle East Commercial Area. Maintain close working relationships with engineering and maintenance personnel to continuously monitor and evaluate plant systems and equipment through a Plant Process Advisory model. Support Process Intelligence Center (PIC) initiatives such as plant monitoring, troubleshooting, plant simulation training sessions, plant modelling and plant efficiency monitoring. Maintain alignment with Plant Managers, Site Leadership and the Business Area on asset management opportunities and commercial priorities. Provide technical support for turnarounds, including catalyst inspection, sampling, change-out planning and post-turnaround performance validation.<br><br>Minimum Requirements And Qualifications<br><br>Education & Experience<br><br>Bachelor's Degree in Chemical Engineering (Master's degree is a plus). Minimum 12+ years of experience in Engineering and/or Operations in a senior technical role within the industrial gases, refining, petrochemical (Methanol and ammonia) or hydrogen production industry. Demonstrated experience and knowledge of the technology, design and operation of Steam Methane Reformers (HYCO) and CO₂ production systems is preferred. Single-technology expertise will be considered; multi-technology background is strongly preferred at this senior level. Proven track record of start-up, commissioning and plant operating experience. Demonstrated experience mentoring junior engineers and leading multi-disciplinary technical teams.<br><br>Technical Skills<br><br>Process Simulation – Strong proficiency in Aspen Plus) for steady-state and dynamic modelling of HYCO, ASU and CO₂ processes; capable of building, calibrating and using rigorous models for plant performance evaluation, troubleshooting and optimization. Process Statistics & Data Analytics – Working knowledge of statistical methods applied to process engineering: SPC / control charts, regression and correlation analysis, capability studies (Cp / Cpk), and multivariate / time-series analysis. Familiarity with tools such as Minitab, PI Datalink. Heterogeneous Catalysis – Solid technical understanding of heterogeneous catalysts used in hydrogen / syngas production, including Hydrodesulfurization (HDS / CoMo, NiMo), ZnO sulfur guards, Pre-reforming, Steam Methane Reforming (SMR), High-Temperature Shift (HTS – Fe/Cr), Low-Temperature Shift (LTS – Cu/Zn/Al) and Methanation (Ni based). This includes reaction kinetics and thermodynamics, activation / reduction procedures, deactivation and poisoning mechanisms, performance monitoring, life prediction and change-out strategy. Process Safety – Knowledgeable in Process Safety Management (PSM), PHA / HAZOP, LOPA, MOC, OPHR, and applicable local EHS regulations. Advanced Process Control & Optimization – Familiarity with APC, RTO and energy optimization concepts for hydrogen and ASU plants. Engineering Tools – Proficient in MS Office (Excel, Word, Power Point), data historians (e.g., OSIsoft PI / AVEVA PI), and standard process engineering calculation tools.<br><br>Leadership & Behavioral Competencies<br><br>Strong commitment to employee involvement, team building, diversity and inclusion. Proven ability to mentor and coach less experienced engineers and to act as a recognized technical reference within the organization. Able to communicate effectively across management, operations, maintenance and customer interfaces within and across regions. Proficiency in English (spoken and written) is required; Arabic language skills are a plus. Demonstrated leadership, organizational, computer and interpersonal skills. Personal commitment to continuous self-development and flexibility to work outside normal hours to meet operational and project commitments. Excellent influencing skills, ability to build trust and confidence with frontline workers, supervisors and management. Strong critical thinking, problem-solving and analytical skills are prerequisites. Confident, assertive, self-motivated and results oriented. Personal commitment to corporate values and to a culture of continuous improvement. Formal training and experience with Six Sigma (Green / Black Belt) and Continuous Improvement tools is a plus.<br><br>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Summary We are looking for an enthusiastic and commercially minded Junior IT Sales Engineer to join our team.<br> This opportunity is suitable for a fresh graduate who has a technical background, strong communication skills, and an interest in building a career in IT sales.<br> The successful candidate will receive guidance and training to understand our technology solutions, identify customer needs, support sales opportunities, and communicate technical concepts clearly to both technical and nontechnical clients.<br> Key Responsibilities Learn and understand the company’s IT solutions, services, and value propositions.<br> Support the sales team in identifying and qualifying new business opportunities.<br> Research potential clients, markets, and relevant decision-makers.<br> Contact prospective customers through email, LinkedIn, telephone, and other approved channels.<br> Attend client meetings to understand business and technical requirements.<br> Explain IT solutions clearly to technical and nontechnical stakeholders.<br> Assist in preparing presentations, quotations, technical proposals, and commercial offers.<br> Support responses to RFPs, RFQs, and customer inquiries.<br> Coordinate with technical teams to develop solutions that meet client requirements.<br> Work with vendors and technology partners to collect product information, specifications, and pricing.<br> Maintain accurate records of leads, opportunities, meetings, and follow-up activities in the CRM system.<br> Follow up with prospective and existing clients under the guidance of the sales manager.<br> Support the handover of signed opportunities to technical and delivery teams.<br> Develop knowledge of market trends, competitors, and emerging technologies.<br> Work toward agreed activity, pipeline, and sales targets.<br> Solution Areas The role may involve solutions and services related to: IT infrastructure and data centers Cloud and hybrid-cloud solutions Cybersecurity Networking and connectivity Microsoft solutions Backup, storage, and disaster recovery Managed IT services IT outsourcing and professional services Enterprise software and system integration Competitive monthly salary.<br> Sales commission and performance-based incentives.<br> Medical insurance.<br> Professional training on the company’s IT solutions.<br> Career development and progression opportunities.<br> Supportive and professional working environment.<br> Qualifications Saudi national.<br> Based in Madinah or willing to work there Bachelor’s degree in Computer Science, Information Technology, Computer Engineering, Communications Engineering, Information Systems, or a related technical field.<br> Fresh graduate or up to one year of experience.<br> Basic understanding of IT infrastructure, networking, cloud, cybersecurity, or software solutions.<br> Strong interest in technology, sales, and customer engagement.<br> Ability to understand technical information and explain it in simple language.<br> Good presentation, communication, and interpersonal skills.<br> Confidence in communicating with customers and different stakeholders.<br> Good research, organization, and follow-up skills.<br> Proficiency in Microsoft Office.<br> Very good written and spoken English.<br> Ability and willingness to learn quickly.<br> Willingness to attend client meetings and travel when required.<br></span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Nationality"> <b>Nationality</b> </div> <div class="col is-9 p5" data-automation-id="data_Nationality"> Saudi Arabia </div> </div> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br><p>SYSTRA is one of the world's leading engineering and consultancy groups specialising in public transport and sustainable mobility. With over 10,300 employees, SYSTRA's mission is to design safe and sustainable transport solutions to bring people together, develop social inclusion and facilitate access to employment, education and leisure throughout the world.</p><br><br><p>For 65 years, the Group has been working alongside cities and regions to contribute to their development by creating, improving and modernising their infrastructure and transport systems, throughout the life cycle of their projects. SYSTRA is involved from the earliest stages of design through to the testing, deployment and maintenance phases. The company provides all its services in over 80 countries worldwide and generates 74% of its turnover internationally. With its new services, SYSTRA supports its clients and partners in their digital, ecological and energy transition, in order to invent the mobility of tomorrow.</p><br><br> Context <br><p>SYSTRA is looking for an amazingly talented<span><strong>Telecom Engineer (System)</strong></span><strong>(Saudi National)</strong>to perform design reviews for railway operational telecommunications systems to ensure compliance with project requirements and industry standards.&nbsp;</p><br><br> Missions/Main Duties <br><ul><li>Coordinate with internal and external technical disciplines to ensure successful integration of telecommunications systems within the overall project design.</li><li>Coordinate assigned activities with contractors, utility providers, government authorities, and other stakeholders.</li><li>Investigate field issues affecting property owners, contractors, and maintenance operations resulting from telecommunications and utility relocation activities.</li><li>Review and approve telecommunications network relocation plans submitted by Design-Build contractors.</li><li>Review and approve telecommunications design deliverables, including specifications, reports, schedules, drawings, and technical schematics.</li><li>Review and verify detailed equipment and material requisitions proposed by contractors to ensure compliance with project requirements.</li><li>Participate in internal and external coordination meetings, progress meetings, and design review workshops.</li><li>Support the resolution of technical issues related to operational telecommunications systems and interfaces.</li><li>Monitor design progress and provide recommendations to ensure successful project delivery.</li></ul> Profile/Skills <br><ul><li>Degree, Diploma, or professional qualification in Telecommunications, Electronics Engineering, Electrical Engineering, Communications Engineering, Civil Engineering, or a related discipline.</li><li>Minimum 10 years of relevant experience in telecommunications engineering and design.</li><li>Strong experience in the design of SCADA systems that interface with railway operations.</li><li>Extensive knowledge of telecommunications systems, including telephony, transmission systems, FTN/GSM-R, and copper and fiber optic cabling infrastructure.</li><li>Strong experience with Operational Telecommunications Systems and Station Information and Surveillance Systems.</li><li>Experience designing IP-based networks supporting MPLS and VoIP technologies.</li><li>Strong technical review, coordination, and problem-solving skills.</li><li>Excellent written and verbal communication skills.</li></ul> <br><p>Systra is an equal opportunities company; this position is open to all applicants.</p><br><br> Workplace Type <p>On-site</p><br><br> <br> Why SYSTRA? Read more <span> sur Why SYSTRA?</span> <br> <br> <br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Nationality"> <b>Nationality</b> </div> <div class="col is-9 p5" data-automation-id="data_Nationality"> Saudi Arabia </div> </div> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

We are seeking a Track Design Engineer with a solid design background to extend PMC services for a major client in Saudi Arabia. The role focuses on leading and assuring track alignment design for rail projects, aligning multidisciplinary interfaces, and driving delivery to client standards. <br>Responsibilities<br>Support the Engineering Lead to review horizontal and vertical alignment design for mainline, depot, and yard tracks using industry-standard tools (e.g., Bentley Open Rail, Civil 3D, MX). Define and enforce geometric design criteria, alignment control parameters, and tolerances across project phases (concept, preliminary, detailed design). Conduct design checks, optioneering, and value engineering for alignments, turnouts, crossovers, and transition curves to optimize performance, maintainability, and cost. Ensure compliance with international and regional rail standards and client-specific requirements, integrating RAMS, maintainability, and ride quality considerations. Act as the integrated PMC representative to the client, coordinating multi-disciplinary interfaces (civil, structures, trackwork, OCS, signaling, drainage, utilities). Manage technical queries, change requests, and design approvals, maintaining clear audit trails and configuration control. Lead design risk management for alignment choices, including ground conditions, utilities, third-party constraints, and environmental factors. Oversee contractor and designer performance on alignment deliverables, ensuring baseline schedule and quality adherence. Maintain design schedules, registers, and progress reporting for alignment-related works. Prepare and present technical reports, design review comments, and decision logs to client stakeholders. Ensure constructability and staging are embedded in alignment design, supporting site teams during construction and responding to RFIs. Implement robust quality assurance processes, including independent design reviews and verification/validation activities. Align deliverables with KSA authority requirements and applicable standards; support permitting and approvals. Engage with stakeholders, authorities, and third parties to resolve constraints, protect corridors, and secure approvals.<br>Qualifications and Experience Bachelor’s degree in Civil Engineering or related discipline; Master’s preferred. Minimum 10 years of experience in railway track alignment and geometric design, including significant involvement in major rail programs. Proven experience in the KSA or GCC on rail design projects is strongly preferred; familiarity with KSA standards and authority processes is an advantage. Proficiency with rail alignment and civil design software (e.g., Open Rail/Open Roads, Civil 3D, MX, Power Rail Track) and with model/drawing production workflows (BIM preferred). Solid knowledge of track geometry principles (UIC/EN/AREMA as applicable), turnouts and special trackwork, transition curves, cant and cant deficiency, and alignment constraints in urban and high-speed/metro environments. Demonstrated experience managing multidisciplinary interfaces and performing PMC/consultancy functions with clients. Strong communication, report writing, and stakeholder management skills; ability to lead technical meetings and drive decisions. Experience with quality systems, risk management, and configuration control for design packages.

Our subsidiary, Adree, is seeking a highly skilled Senior Performance Test Engineer to lead performance testing initiatives across enterprise applications. This role requires hands-on experience in performance engineering, workload modeling, and test automation to deliver high-performing and scalable solutions.<br><br>Key Responsibilities:<br><br>Develop and maintain the performance test strategy, roadmap, standards, templates, entry/exit criteria, and performance quality gates Analyze business volumes, usage patterns, architecture, service-level objectives, and nonfunctional requirements to create realistic workload models Plan and execute load, stress, endurance/soak, scalability, capacity, spike, and volume tests for web, mobile back ends, APIs, integrations, and digital services Design, develop, review, and maintain performance-test scripts, scenarios, parameterization, correlation, data preparation, and reusable components Define test-environment, monitoring, data, access, and service-virtualization requirements; coordinate readiness with Dev Ops and infrastructure teams Correlate client, server, database, network, container, and application-monitoring data to identify bottlenecks and isolate root causes Evaluate response time, throughput, concurrency, error rate, resource utilization, capacity, and SLA compliance; translate results into clear technical recommendations Integrate performance tests and thresholds into delivery pipelines and establish repeatable baseline and trend reporting Lead defect triage and performance tuning discussions with developers, architects, DBAs, SRE, infrastructure, network, and security teams Produce test plans, daily/periodic status updates, executive summaries, detailed reports, risks, and release recommendations Estimate effort, plan assignments, review deliverables, mentor team members, and ensure traceability and audit-ready evidence Deliver knowledge-transfer sessions and practical coaching on performance testing and the implemented operating model<br><br>Requirements<br><br>Bachelor's degree in Computer Science, Software Engineering, Information Technology, or a related discipline8+ years of software testing experience, including at least 4 years of hands-on performance testing/engineering and prior technical or team leadership experience Advanced practical experience in performance-test scripting, scenario design, correlation, parameterization, execution control, analysis, and diagnostics Strong understanding of HTTP/HTTPS, REST/SOAP APIs, web services, authentication, distributed systems, databases, networks, and common performance bottlenecks Proven ability to derive workload models from production or forecast data and define measurable non-functional acceptance criteria Experience integrating performance tests with continuous-delivery pipelines and source control Strong analytical, troubleshooting, stakeholder-management, documentation, and presentation skills Professional English communication; Arabic is an advantage<br><br>Preferred Qualifications:<br><br>Experience with enterprise test management, service virtualization, container-platform monitoring, observability, and enterprise API gateways Experience with mobile back-end performance, cloud/container platforms, resilience/failure testing, and performance-capacity planning Relevant certifications in performance testing, software testing, Agile, or Dev Ops Experience in government, regulated, or large-scale digital-service environments<br><br>Job Location: Client Site

Job Summary We are seeking an experienced BMS Testing & Commissioning Engineer to manage the testing, commissioning, troubleshooting, and optimization of Building Management Systems (BMS) across commercial, industrial, data center, and oil & gas projects. The ideal candidate should possess strong expertise in HVAC controls, BMS platforms, EPMS integration, automation systems, and electrical commissioning while ensuring compliance with international standards and project specifications. Key Responsibilities Perform testing, commissioning, and troubleshooting of Building Management Systems (BMS). Commission HVAC equipment including AHUs, FCUs, Chillers, VRF/VRV systems, Pumps, VAVs, Cooling Towers, and Ventilation Systems. Conduct I/O point verification, loop checks, sensor calibration, actuator testing, and functional performance testing. Configure and commission DDC controllers, field devices, sensors, valves, and actuators. Develop and validate control logic, sequences of operation, and BMS graphics. Integrate BMS with Fire Alarm, Access Control, CCTV, EPMS, SCADA, and other ELV systems. Support EPMS integration and real-time monitoring of electrical systems. Diagnose communication issues involving BACnet, Modbus, TCP/IP, OPC, RS485, and other industrial protocols. Review engineering drawings including control schematics, P&IDs, network architecture, SLDs, and I/O schedules. Execute FAT, SAT, Pre-Commissioning, Functional Performance Testing (FPT), and system validation. Optimize system performance to improve operational efficiency and reduce energy consumption. Coordinate with consultants, contractors, MEP teams, vendors, and clients throughout project execution. Prepare commissioning reports, testing documentation, inspection records, and project handover packages. Ensure compliance with ASHRAE, IEC, NEC, NFPA, API, project QA/QC procedures, and HSE requirements. Required Qualifications Bachelor's Degree in Electrical Engineering or Electrical & Electronics Engineering.2 - 5 years of experience in BMS, Electrical Commissioning, Automation, or Industrial Projects. Experience in Data Centers, Oil & Gas, Industrial Plants, Commercial Buildings, or Critical Facilities. Strong understanding of HVAC systems and control strategies. Experience with Siemens, Honeywell, Schneider, or Distech BMS platforms. Hands-on experience with EPMS integration and electrical monitoring systems. Familiarity with LV/MV electrical systems and switchgear commissioning. Knowledge of international standards including IEC, NEC, NFPA, ASHRAE, and API. Technical Skills Building Management Systems (BMS) EPMS / Electrical Power Monitoring Systems HVAC Controls & Automation Siemens Desigo CC / ABTHoneywell BMSDistech Controllers PLC & SCADA Systems DDC Controllers Modbus BACnet TCP/IPOPCRS485EC-GFXHVAC Commissioning FAT / SATFunctional Performance Testing Loop Checking I/O Verification Sensor Calibration Electrical Testing & Commissioning Electrical QA/QCLV/MV Systems Switchgear & MCCAuto CADHMIWin CC SCADAPrimavera P6 (Basic) Preferred Industry Experience Data Centers Oil & Gas Petrochemical Industrial Manufacturing Power Plants Commercial Buildings Critical Infrastructure Key Competencies Testing & Commissioning Troubleshooting & Root Cause Analysis HVAC Controls BMS Integration Energy Optimization Technical Documentation Electrical QA/QCProject Coordination Communication & Stakeholder Management Problem Solving Safety & Quality Compliance

Hungerstation is part of the Delivery Hero Group, the world’s pioneering local delivery platform, our mission is to deliver an amazing experience—fast, easy, and to your door. We operate in around 65 countries worldwide. Headquartered in Berlin, Germany. Delivery Hero has been listed on the Frankfurt Stock Exchange since 2017 and is part of the MDAX stock market index.<br><br>Job Description<br><br>Hunger Station is hiring a Senior Data Engineer I to design, build, and scale our data platform and processing frameworks that power analytics, AI-driven applications, and business intelligence across the organization.<br><br>This role sits at the core of our data ecosystem focusing on scalability, reliability, and performance of data systems.<br><br>You Will Be Working On<br><br>Design, implement, and extend scalable data platforms and architectures Build and maintain high-performance data pipelines and data models using Big Query Optimize datasets and workloads for performance and cost efficiency Develop analytics-ready data models, semantic layers, and governed metrics Build backend services and APIs using Python or Java to support data applications Contribute to AI-enabled data use cases (e.g., automated insights, conversational analytics) Improve system reliability by addressing technical debt and scaling challenges Implement best practices across CI/CD, testing, monitoring, and deployment automation Manage and optimize cloud infrastructure supporting the data platform Collaborate with cross-functional teams to ensure data quality and engineering standards Ensure compliance with data governance, privacy, and security standards Improve monitoring frameworks and operational resilience of the data platform Support initiatives to enhance data quality, reliability, and system stability<br><br>Qualifications<br><br>5–8 years of experience in Data Engineering or similar roles Bachelor’s degree in Computer Science, Engineering, or related field Master’s or relevant certifications are a plus Strong experience building scalable distributed data systems Hands-on with GCP (Big Query preferred) Proven experience with ETL/ELT pipelines and data modeling Experience with modern data stack (Airflow, dbt, Looker) Strong SQL skills and understanding of relational data systems Experience with Python or Java for backend/data services Familiarity with Infrastructure-as-Code (Terraform preferred) Experience with CI/CD, testing, and monitoring practices Exposure to AI-driven data applications or LLM integrations is a plus<br><br>Additional Information<br><br>We offer relocation support globally to our permanent employees. Exchange ideas and meet 2000+ colleagues from different teams within Delivery Hero in our active guilds and through our global tech and product community. Develop your skills with your personal educational budget for conferences and external training. Access our e-learning platform Linked In and participate in our various in-house training programs And much more…

Company Introduction"We drive a sustainable future through innovative energy equipment, smart technology and solutions."<br>At Hanwha Power, we are dedicated to ensuring the world's energy flows more reliably, efficiently, and sustainably.<br>We take pride in designing and manufacturing high-performance oil-free compressors and delivering comprehensive energy solutions—from gas turbine services to precision fuel supply systems. Beyond today's technology, we are actively shaping a better tomorrow by developing next-generation low-carbon solutions powered by hydrogen and ammonia, helping diverse industries transition toward a greener future.<br>With over 9,000 units delivered worldwide and a robust network spanning North America, Europe, the Middle East, and Asia, our reach is our strength. However, our true value lies in being close to our customers. We go beyond delivering products, building lasting partnerships through sincere technical support and responsive service you can count on.<br>In an era of rapid electrification, data center expansion, and decarbonization, the role of energy has never been more vital. Hanwha Power stands at the heart of this transformation. We are more than just a provider; we are a trusted partner, empowering our customers to embrace a cleaner and more efficient energy future.<br>The strength of Hanwha Power comes from the harmony of an agile, adventurous spirit and deep engineering expertise. We move beyond rigid frameworks to share ideas freely and support one another's growth through genuine collaboration. Here, we do more than just work—we walk together with the shared pride of designing the future of energy for our planet.<br>Role Overview The Manufacturing Engineer aims to produce compressors cost-effectively while meeting drawing requirements. This role performs overall technical tasks to ensure compressor assembly and testing, and resolves issues that arise during the process. Strong communication skills with designers and workers are required.<br>Key Responsibilities Prepare and manage compressor assembly and test procedures. Design compressor assembly fixtures. Provide technical support for compressor assembly and testing. Troubleshoot issues arising during compressor assembly and testing.<br>Basic Qualifications Bachelor's degree in mechanical engineering or a similar field. Over 5 years of technical experience in the machinery manufacturing industry. Proficiency with Computer-Aided Design (CAD) software, including Auto CAD and Catia.<br>Preferred Qualifications Experience in analyzing rotating machinery failures. Experience in analyzing the cause of leaks. High-pressure gas related certifications. Electrical certification.<br>Equal Employment Opportunity (EEO) Hanwha Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable law. We are committed to providing reasonable accommodations for individuals with disabilities throughout the recruitment and hiring process.

The Procurement & Material Engineer will be responsible for supporting the procurement of construction materials, equipment, and related services in accordance with project specifications, approved budgets, and project schedules. The role includes sourcing suppliers, obtaining and evaluating quotations, coordinating material approvals, issuing Purchase Orders, and following up on deliveries.<br>Key Responsibilities Review project BOQ, drawings, specifications, material schedules, and Material Requisitions (MR/PR) to understand procurement requirements. Prepare and issue Requests for Quotation (RFQs) to approved and potential suppliers/subcontractors. Obtain quotations and prepare technical and commercial comparison sheets for evaluation and approval. Coordinate with Technical, Engineering, QA/QC, and Project teams to ensure proposed materials comply with project specifications and requirements. Assist in preparing and following up Material Submittals, samples, technical data sheets, certificates, and other documents required for consultant/client approval. Source and identify suitable suppliers and alternative materials while maintaining the required technical specifications and quality standards. Negotiate with suppliers regarding prices, payment terms, delivery schedules, warranties, and other commercial conditions under the supervision of senior procurement staff. Prepare Purchase Orders (POs) and ensure all required approvals and supporting documents are completed. Follow up with suppliers regarding material approvals, production, availability, and delivery schedules. Coordinate with Site, Logistics, and Warehouse teams to ensure materials are delivered according to project requirements. Monitor procurement and material delivery schedules and highlight any potential delays that may impact project activities. Coordinate with Finance and Accounts regarding supplier invoices, payment documentation, and related matters. Maintain updated procurement logs, material tracking sheets, supplier databases, quotations, Purchase Orders, and other procurement records. Assist in supplier evaluation and development of new suppliers and subcontractors. Support the Procurement Manager and senior procurement team in day-to-day procurement activities and reporting.<br>Qualifications & Experience Bachelor’s Degree in Civil, Architecture, or a related Engineering discipline.0–4 years of experience in procurement, material engineering, or a related role, preferably within the construction/contracting industry. Fresh graduates with a strong engineering background and interest in procurement are encouraged to apply. Basic understanding of construction materials, drawings, BOQ, specifications, and material approval procedures. Familiarity with procurement processes including RFQ, quotation evaluation, comparison sheets, Purchase Orders, and delivery follow-up. Knowledge of ERP/procurement systems such as Oracle is an advantage. Good knowledge of Microsoft Office, particularly Excel. Required Skills Good technical and analytical skills. Good communication, coordination, and negotiation skills. Ability to read and understand engineering drawings and specifications. Strong organizational and follow-up skills. Attention to detail and accuracy in procurement documentation. Ability to coordinate with suppliers and different project departments. Ability to handle multiple procurement requirements and work within project deadlines. Good written and spoken English. Arabic language skills are an advantage.

Job Overview We are seeking a high-performing Senior Sales Engineer with proven experience in Physical Perimeter Security Systems to join our growing team in Saudi Arabia. The ideal candidate will have a minimum of 5 years of successful sales experience in the security infrastructure industry, with a strong track record in driving business growth, managing key accounts, and developing new client relationships across the Kingdom.<br>Key Responsibilities Develop and execute strategic sales plans to achieve and exceed sales targets. Identify and pursue new business opportunities with contractors, consultants, government entities, and end users. Build and maintain strong relationships with key decision-makers, project managers, and procurement teams. Conduct technical presentations, site visits, and product demonstrations. Prepare and submit technical and commercial proposals in line with project specifications and company standards. Prepare and submit Material Submittals and Prequalification (PQ) documents according to client requirements. Collaborate with engineering, estimation, and project teams to ensure successful project delivery and customer satisfaction. Monitor market trends, competitor activities, and upcoming projects to identify new opportunities. Participate in exhibitions, trade shows, and industry events to promote the company's products and services. Prepare regular sales reports, forecasts, and pipeline updates for management. Ensure timely invoice submission and follow up on payment collections. Maintain accurate sales inquiries, quotations, and order records. Support and supervise Sales and Project Coordinators to ensure timely document release for manufacturing and dispatch.<br>Requirements Bachelor's degree in Engineering or an equivalent qualification. Minimum 5 years of sales experience in Physical Perimeter Security Solutions within the Saudi market. Hands-on experience with one or more of the following:Chain Link & Welded Mesh Fencing Systems Gates, Barriers, Bollards, and Turnstiles Security Fencing (Anti-Climb, Razor Mesh, Electric Fence) Access Control Integration or related security systems Proven track record of achieving sales targets in KSA. Strong network within the construction, security, and infrastructure sectors. Excellent communication, negotiation, and presentation skills. Fluent in English (Arabic is an advantage). Valid Saudi driving license with willingness to travel across the Kingdom.<br>Preferred Qualifications Experience working on government, defense, critical infrastructure, or GIGA projects in Saudi Arabia. Ability to interpret fence drawings, layouts, specifications, and BOQs. Strong technical understanding with a solution-oriented approach. Self-motivated, results-driven, and able to work independently.<br>Key Competencies Strong knowledge of the Saudi market and Physical Perimeter Security products. Excellent sales, marketing, and business acumen. Strong analytical, presentation, and communication skills. Effective negotiation and influencing abilities. Proficiency in Microsoft Office (Excel, Word, Power Point, Outlook). Strong teamwork, problem-solving, and initiative.