Maintenance Engineer Jobs - Eastern Province Saudi

<p>The opportunity Executes attentively incoming inspection protocols as assigned and report all the findings and results in the SAP. Performs labeling of all components with a component identification tag if components are compliant through inspection. Restrains the components at the dedicated area when fails the inspection and initiate the supplier non-conformance management process to report back the issue to the suppliers.</p><p>How you ll make an impact</p><ul><li>Ensure a safe environment by implementing HSE requirements</li><li>Conduct visual/dimensional inspection of purchased parts, materials, samples and assemblies</li><li>Document inspection results as required</li><li>Report to quality engineer /Quality manager on any deviations observed during incoming inspection</li><li>Create quality inspection records, apply the visual indications on the inspected parts as per procedures</li><li>Create Nonconformity reports and keeping track of the status</li><li>Record and track daily IQC inspection backlog</li><li>Maintain traceability of component materials as to inspection status</li><li>Handle materials in accordance to procedures and prevent mix-ups, damage or other adverse effects.</li><li>Log/track materials through receiving inspection process and SAP entries</li><li>Record transactions and move materials to accepted material area</li><li>Communicate inspection results to Quality engineers and other relevant persons.</li><li>Refer to verify assembly documentation accuracy, read engineering drawings etc.</li><li>Performs any other projects or duties that may be assigned.</li><li>Collaborate with other departments for deviation detection, root cause analysis and correction measures implementation.</li><li>Support failure analysis, trouble shooting, site visit, reporting &amp; quality process, use A3 template in analysis</li><li>Employee shall also carry out any tasks that are assigned by management necessary to fulfil the job requirements.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Diploma in Electrical, Mechanical technical courses</p><p>0-2 Years experience</p><p>Quality Control/Quality Assurance</p><p>Knowledge to read drawings</p><p>MS office and computer skills</p><p>Hands on Inspection of material and use of tools to measurement</p><p>English Communication skills</p><p>Influencing Continuous Improvement and decision making and time Management.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Your role Your mission is to deliver skilled on-site service that keeps our customers equipment performing reliably and safely. You use your expertise to repair, maintain, and support the technology they depend on. Through your work, you help customers secure the uptime and performance they need to run their operations with confidence. You join the Customer Center Service team and report into the Operations Manager. Your mission is to deliver skilled on-site service that keeps our customers equipment performing reliably and safely. You use your expertise to repair, maintain, and support the technology they depend on. Through your work, you help customers secure the uptime and performance they need to run their operations with confidence. You join the Customer Center Service team and report into the Operations Manager. Your day-to-day Conduct planned and ad hoc visits to inspect, service, troubleshoot, and repair various technical systems. You will also diagnose any issues to prevent equipment downtime. Perform installations, ensure safety compliance, and document activities. Be the on-site contact, providing service recommendations and addressing customer needs promptly. Your compensation and benefits We offer compensation that reflects the skills, experience, and responsibilities of the role. Pay also depends on the country where the job role is based, as compensation practices vary across our markets. During the recruitment process, we share clear information about the pay and benefits for your location, so you know what to expect before moving forward. Your location You will be part of our customer center in Jubail, Saudi Arabia (SA). You join a field service team that works close to our customers, where most of your time is spent traveling within your assigned area to support them on-site. Why it is great to work with us Your career grows through your skills, your curiosity, and the people you work with. As a Field Service Engineer, you work close to our customers and see firsthand how our technology performs in real conditions. You build your expertise by solving problems on-site, sharing knowledge with colleagues, and learning from every service task. We focus on long term development and support you as you explore new ways to improve how we keep our customers equipment running. Innovation guides how we think and act we test, learn, and apply new insights to make our service work even better. You make a meaningful impact by taking ownership of your work and using your ideas to help our customers operate with confidence, supported by leaders who trust and empower you</p></div></section>

<b>Join Alrashed Industrial as a Maintenance Technician!</b><br><br>As a key member of our maintenance team, you will be pivotal in ensuring the safety and efficiency of our fire protection systems. Your expertise will help uphold our high safety standards and prevent potential hazards.<br><br><b>Key Responsibilities:</b><br><ul><li>Conduct regular inspections of fire protection systems, including fire alarms, fire sprinklers, and extinguishers.</li><li>Perform routine maintenance tasks such as testing, cleaning, and replacing parts.</li><li>Keep accurate records of inspections and maintenance activities.</li><li>Respond promptly to issues related to fire protection systems and troubleshoot effectively.</li><li>Collaborate with the maintenance team to schedule preventive maintenance.</li></ul><br><b>Candidate Requirements:</b><br><ul><li>Proven experience as a Maintenance Technician focused on fire protection systems.</li><li>Strong knowledge of fire protection systems, codes, and regulations.</li><li>Ability to troubleshoot and repair fire protection equipment effectively.</li><li>Excellent attention to detail and organizational skills.</li><li>Good communication and teamwork skills.</li></ul><br><b>Skills Required:</b><br><ul><li>In-depth knowledge of fire protection systems and equipment.</li><li>Understanding of safety regulations and codes.</li><li>Experience in conducting inspections and tests.</li><li>Excellent troubleshooting skills.</li><li>Proficiency in documenting maintenance activities.</li></ul><br>Be a part of our dynamic team where your skills will make an impact!

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Contracts Engineer is responsible for managing the interaction between the Owner and Contractors in technical work scopes, chasing up on production of RFPs, contracts, bids and tenders. Also, to carry out the process of contract MGMT for Retal and its subsidiaries to ensure the most competitors price and required quality as well as improve term of payments.</p><p>Primary Duties &amp; Responsibilities:</p><ul><li>Market survey to source the best contractors &amp; have approved contractor list.</li><li>Collect &amp; evaluate pre-qualification documents and review official documents of applied contractors.</li><li>Nominate and create of Preferred Contractor List.</li><li>Establish good business relationship with the contractors.</li><li>Arrange the preparation of Requests for Proposals (RFPs)</li><li>Technical co-ordination between Project Management, Consultants and Contractors.</li><li>Gather all relevant tender documents</li><li>Co-ordinate tender process, review of bid documents and BOQs</li><li>Issue tender documents and invite all pre-qualified consultants and contractors to tender</li><li>Co-ordinate the clarification of queries from the relevant parties</li><li>Receive Tender documents from contractors and arrange review and revision of tender documents by technical personnel in Design and Construction Departments.</li><li>Review proposals from consultants and contractors and prepare tender evaluation for each.</li><li>Arrange clarification meetings to discuss and confirm requirements.</li><li>Co-ordinate negotiations between the relevant parties.</li><li>Prepare Service Agreements &amp; Contract between Retal and the successful bidder.</li><li>Prepare and issue Letter of Intent (LOI).</li><li>Attend on-site project progress meetings.</li><li>Establishes and manages strong business relationships with all contractors.</li><li>Handle of any task within the scope of his work and assigned by his direct manager.</li><li>Undertake any other ad-hoc engineering related duties as required.</li></ul><p>Skills:</p><ul><li>Communication</li><li>Active listening skills</li><li>Computer literacy</li><li>AutoCAD &amp; MS Project</li><li>Cost Estimation</li><li>Domestic Legal Overview</li><li>FIDIC Law</li><li>Construction Management</li><li>Customer quality /focus</li><li>Work Ethics and Values</li><li>Problem solving</li><li>Negotiating and Interactive Communication</li><li>Decision Making</li><li>Handle pressure</li><li>Work to strict deadlines</li><li>Self-motivate</li><li>Teamwork</li><li>Planning and forecasting</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Experience and Qualifications:</p><ul><li>4-5 years in Engineering (Civil, Arch., Construction Management)</li><li>Professional Procurement and negotiation qualification</li><li>4+ years experience in construction field.</li><li>2+ years experience in contracting &amp; bidding.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>SUMMARY OF THE ROLE We are looking for a Maintenance and Projects Manager based in Dammam, reporting to the Operations Manager. The successful candidate will lead and manage Maintenance by enhancing its developments based on Jotun s values and in accordance with local, regional and corporate objectives and guidelines, to ensure right equipment reliability, maintain HSEQ standards whilst optimising maintenance cost.</p><p>Responsibilities:</p><ul><li>Lead and develop the Maintenance team by providing coaching, guidance, and performance management to ensure a competent, engaged, and high-performing workforce that meets current and future business needs.</li><li>Manage and oversee all maintenance activities to ensure equipment reliability, asset integrity, optimal plant performance, and minimal unplanned downtime through effective preventive and corrective maintenance programs.</li><li>Ensure compliance with HSEQ standards, legal requirements, and company policies, including ISO 9001, ISO 14001, ISO 45001, the Jotun Operations System (JOS), and maintenance of critical HSE installations.</li><li>Drive continuous improvement initiatives by utilizing JOS tools, maintaining the Belt program and assessment requirements, and identifying opportunities to enhance operational efficiency and reliability.</li><li>Manage maintenance resources and systems, including Computerized Maintenance Management System "CMMS "administration, maintenance planning, spare parts inventory, budgets, service contracts, and contractor performance.</li><li>Support capital projects and operational excellence initiatives through participation in management meetings, equipment selection, Factory Acceptance Testing (FAT), and cross-functional improvement projects.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>WHAT WE ARE LOOKING FOR AND WHAT WE OFFER</h2><p>Q ualification : Bachelor's degree in Mechanical Engineering or Electrical Engineering. More than 10 years of experience in the powder coatings manufacturing industry and project management. Experience in instrumentation and automation is an added advantage. Experience in project execution and management is preferred.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>SDEC is one of the leading equipment distributors and custom industrial equipment solution provider. SDEC has a dynamic portfolio of products which is determined by the needs of our customers. SDEC culture is characterized by high customer orientation with a long-term view of relationships. We are inviting applications from candidates who have experience working as Team Leader.</p><p>Job Purpose: Maintains and repairs industrial machinery and equipment using hoists, lift trucks &amp; hand and power tools. Troubleshoots problems and repairs or replace worn or broken parts as necessary. Performance is aimed at ensuring a minimum downtime of the equipment.</p><p>Main Responsibilities</p><ul><li>Ability to read and understand electrical drawings.</li><li>Perform voltage changes on generators based on customer requirements.</li><li>Re-wire, adjust, upgrade/install control panels and voltage regulators</li><li>Determine necessary parts and special tools required to complete jobs.</li><li>Diagnose issues with the Alternator.</li><li>Adjust speed controls and various settings.</li><li>Run load bank tests on the generator.</li><li>Work closely with the Workshop Supervisor and Service Manager on project progress, estimates.</li><li>Maintain a safe work environment at work sites.</li><li>Use electronic software and tools to diagnose, repair and reprogram generator controllers and related parameters.</li><li>Install, maintain, and enhance electrical systems and components, including fuses, lights, and wiring.</li><li>Inspect, test, and diagnose issues with electrical systems and components</li><li>Perform all work in a manner that meets and follows electrical codes, blueprints, and standards.</li><li>Test electrical systems and components to ensure proper functioning</li><li>Complete required documentation of repairs and service information.</li><li>Ensure adequate inventory of necessary supplies and parts.</li><li>Calibrate equipment to provided specifications.</li><li>Perform preventative maintenance on electrical systems and components.</li><li>Troubleshoot problems and make timely repairs.</li><li>Thorough and timely completion of job documentation.</li><li>Provide inputs to improve, update and add to the Work Instruction Manual.</li></ul><p>HSE Responsibilities</p><ul><li>Adhere to follow all company Quality, Health, Safety, And Environmental (QHSE) policies, procedures, and legal requirements.</li><li>Promptly identify and report unsafe conditions, incidents, and near misses to the appropriate supervisor or QHSE team.</li><li>Properly use, maintain, and store personal protective equipment (PPE) and safety tools as required by the job.</li><li>Attend and actively participate in mandatory Safety inductions, HSE trainings, safety meetings, emergency drills and root cause investigations.</li><li>Follow established emergency response procedures, including evacuation plans, fire response, and first aid if trained.</li><li>Follow protocols to minimize environmental impact, including proper waste disposal and reporting spills or leaks.</li><li>Provide suggestions to enhance Quality, Health, Safety and Environmental procedures and take responsibility and initiatives for continual improvement.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications &amp; Relevant Certifications</h2><ul><li>Technical Diploma/associate degree with major Electrical</li><li>Technical training certificates from OEMs</li><li>Driving License preferably GCC driving license</li></ul><h2>Knowledge Skills &amp; Experience</h2><ul><li>Working knowledge of Electrical components of genset like alternator, control panel</li><li>Troubleshooting and field repair of large sophisticated high or low speed diesel driven generators, low, medium, and high voltage 13.8KV as well as control devices e.g., auto-start, auto load share, auto-parallel, auto-stop, synchronizing.</li><li>Programming of controllers like Deep Sea and Synchronization systems</li><li>Practical knowledge of Mechanical, Thermal, Hydraulic, Electronics principles.</li><li>Perform welding, fabrication, and calibration as needed.</li><li>Thorough knowledge of Diesel Engine, Fuel, Lubrication, Cooling and Exhaust systems particularly of the rating used for Power generation and applications in Oil &amp; Gas industry.</li><li>Experience in servicing and repairing alternators of different name brands like Stamford, Marelli, Leroy-Somer, Mecc Alte, and Marelli along with control panel components like ATS, MCCB, MCB, PLCs and busbars for applications like synchronization.</li><li>Highly proficient in Technical English.</li><li>Proficiency with MS Office Suite particularly MS Outlook and Calendar</li><li>A strong commitment to all health and safety guidelines.</li><li>Effective communication in English.</li><li>Analytical and systematic problem-solving approach.</li><li>Prior experience in customer-facing roles is preferred</li><li>Years of relevant experience: 0-3</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> </p> <b>Job Description</b> <p> </p> <p> </p> <p>Overview</p> <p> </p> <p>We are looking for an experienced Geotechnical Engineer to join our team, supporting the delivery of high quality engineering solutions within railway projects. This role will be responsible for reviewing technical documentation and supervision of construction works related with its disciplines, including geotechnical, earthworks and the related foundations works, for new and updated assets of railway facilities. The successful candidate will perform detailed reviews of documentation including design drawings and reports, shop drawings and as-build documentation ensuring full compliance with applicable standards and requirements, ensuring robust and compliant engineering outcomes. You will work hand with hand with the civil and structural engineer and will interface with internal and external stakeholders supporting effecting collaboration and ensuring successful project delivery across all stages from the concept design until the final hand-over, including testing and commissioning.</p> <p> </p> Your role <p> </p> <ul> <li>Lead and execute the geotechnical and earthworks aspects of the assigned project, conceptualisation to completion, ensuring adherence to project design specifications and timelines.</li> <li>Act as a technical reference (SME) for geotechnical design standards, analysis, and investigation planning.</li> <li>Collaborating with cross-functional teams, including designers, contractors and project managers, commercial staff, and project controls team to develop project plans and budgets.</li> <li>Interface with internal and external stake holders as required.</li> <li>Ensuring projects meet specifications, deadlines, and quality standards.</li> <li>Review the technical documentation related with the discipline for completeness and compliance with the project requirements, interface, stakeholder requirements and applicable standards. These will include, not limited to, design submissions at different stages, shop drawings, as-built drawings, calculations, assessments, technical specifications, interface documents, value engineering reports, material requests, system code classifications, bill of quantities.</li> <li>Contribute to produce multidisciplinary reviews of the technical documents to ensure full coordination of the deliverables.</li> <li>Participate in producing and reviewing value engineering proposals.</li> <li>Conduct quality inspections and oversee the execution of geotechnical and earhworks, ensuring compliance with safety standards and regulations.</li> <li>Monitor and report on project progress, identifying and addressing potential issues, and deviations from the baseline(s), in collaboration with the Project Control Teams.</li> <li>Report regularly in accordance with the project and company policies.</li> <li>Ensure adherence to the project and company quality program and policies.</li> <li>Stay updated on the latest engineering technologies and best practices.</li> <li>Provide technical support and guidance to project teams.</li> <li>Promote culture of safety.</li> <li>Perform walkdowns, attend site visits and meetings as required.</li> </ul> <p> </p> About you <p> </p> <ul> <li>Master s or PhD in Civil/Geotechnical Engineering from an accredited University.</li> <li>A minimum of 12 years of experience in geotechnical and earthworks, preferably combining construction supervision and technical review.</li> <li>Proficiency in advanced geotechnical software (GeoStudio packages, Slide, PLAXIS, and others) and seismic design principles.</li> <li>Experience performing engineering work in accordance with railway systems procedures, standards, and practices, and KSA regulatory requirements would be a plus.</li> <li>Experience in analysis of project requirements and check for their implementation in technical documentation and in the site works, through site inspections and testing processes.</li> <li>Strong problem-solving abilities and the ability to make decisions in dynamic project environments.</li> <li>Good communication skills for effective collaboration with project teams and stakeholders.</li> <li>Detail-oriented with a focus on delivering high-quality engineering outcomes.</li> </ul> <p> </p> Rewards &amp; benefits</div></section>

<b>Join Qurba Real Estate Investment as a Facilities Maintenance Supervisor!</b><br>This full-time, on-site role in Al Khobar is essential for overseeing routine and preventive maintenance across our facilities. In a company dedicated to excellence in real estate development, you will ensure our buildings, equipment, and facility systems operate optimally.<br><br><b>Key Responsibilities:</b><ul><li>Follow up on daily maintenance and operations tasks to ensure timely completion.</li><li>Supervise technicians, vendors, and service providers, guaranteeing quality and safety standards.</li><li>Coordinate maintenance requests and ensure appropriate documentation and resolution.</li><li>Assist in preparing operational and maintenance reports along with performance dashboards.</li><li>Collaborate with the Leasing/Marketing team regarding tenant move-ins, handovers, and vacant space updates.</li><li>Follow up on tenant service requests to ensure proper responses and resolutions.</li><li>Support inventory control and procurement of spare parts and materials.</li><li>Conduct regular site inspections and report on operational issues.</li></ul><br><b>Qualifications:</b><ul><li>Proficiency in understanding both Arabic and English; full verbal fluency is not required.</li><li>A minimum of 5 years of hands-on experience in facilities maintenance or related operational fields.</li><li>Ability to interact professionally with tenants and clients, effectively managing inquiries and resolving issues.</li><li>Demonstrated team leadership skills, ensuring high-quality performance while supervising staff and assigning tasks.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> </p> <b>Job Description</b> <p> </p> <p> </p> Overview <p> </p> <p>We are looking for an experienced Mechanical Engineer to join our team, supporting the delivery of high-quality engineering solutions within railway projects. This role will be responsible for reviewing technical documentation and supervision of the construction works related with its disciplines, including HVAC, hydraulic systems and fire protection, for new and updated assets of railway facilities. The successful candidate will perform detailed review of documentation including design drawings and reports, shop drawings and as-build documentations ensuring full compliance with applicable standards and requirements, ensuring robust and compliant engineering outcomes. You will work hand with hand with the electrical engineer and will interface with internal and external stakeholders supporting effecting collaboration and ensuring successful project delivery across all stages from the concept design until the final hand-over, including testing and commissioning.</p> <p> </p> Your role <p> </p> <ul> <li> <p>Managing the mechanical and fire protection elements of a project from conceptualisation to completion, ensuring adherence to project design specifications and timelines.</p> </li> <li> <p>Collaborating with cross-functional teams, including designers, contractors and project managers, commercial staff, and project controls team to develop project plans and budgets.</p> </li> <li> <p>Interface with internal and external stake holders as required.</p> </li> <li> <p>Ensuring projects meet specifications, deadlines, and quality standards.</p> </li> <li> <p>Review the technical documentation related with the discipline for completeness and compliance with the project requirements, interface, stakeholder requirements and applicable standards. These will include, not limited to, design submissions at different stages, shop drawings, as-built drawings, calculations, assessments, technical specifications, interface documents, value engineering reports, material requests, system code classifications, bill of quantities.</p> </li> <li> <p>Contribute to produce multidisciplinary reviews of the technical documents to ensure full coordination of the deliverables.</p> </li> <li> <p>Participate in producing and reviewing value engineering proposals.</p> </li> <li> <p>Conduct quality inspections and oversee the installation, testing and commissioning of mechanical and fire protection systems, ensuring compliance with safety standards and regulations.</p> </li> <li> <p>Monitor and report on project progress, identifying and addressing potential issues, and deviations from the baseline(s), in collaboration with the Project Control Teams.</p> </li> <li> <p>Report regularly in accordance with the project and company policies.</p> </li> <li> <p>Ensure adherence to the project and company quality program and policies.</p> </li> <li> <p>Stay updated on the latest engineering technologies and best practices.</p> </li> <li> <p>Provide technical support and guidance to project teams.</p> </li> <li> <p>Promote culture of safety.</p> </li> <li> <p>Perform walkdowns, attend site visits and meetings as required.</p> </li> </ul> <p> </p> About you <p> </p> <ul> <li> <p>Engineering degree from an accredited University in Mechanical Engineering,</p> </li> <li> <p>A minimum of 12 years of experience in mechanical engineering and fire protection, preferably combining construction supervision and technical review.</p> </li> <li> <p>Experience performing engineering work in accordance with railway systems procedures, standards, and practices, and KSA regulatory requirements.</p> </li> <li> <p>Knowledge of environmental and sustainability practices in mechanical engineering.</p> </li> <li> <p>Working knowledge of/experience using mechanical and fire protection codes and standards applicable to railway systems in KSA, including not limited to Saudi Building Code, Civil Defence requirements, NFPA standards.</p> </li> <li> <p>Experience in analysis of project requirements and check for their implementation in technical documentation and in the site works, through site inspections and testing processes.</p> </li> <li> <p>Used to work in coordination with multidiscipline teams and in collaboration with the cross functions of the project organization.</p> </li> <li> <p>Strong problem-solving abilities and the ability to make decisions in dynamic project environments.</p> </li> <li> <p>Good communication skills for effective collaboration with project teams and stakeholders.</p> </li> <li> <p>Detail-oriented with a focus on delivering high-quality mechanical projects.</p> </li> </ul> <p> </p> Rewards &amp; benefits <p> </p> <p>Explore the rewards and benefits that help you thrive at every stage of your life and your career.</p> <p>This includes:</p> <ul> <li> <p>Tax-free salary.</p> </li> <li> <p>Life insurance coverage.</p> </li> <li> <p>Medical insurance.</p> </li> <li> <p>Annual leave balance.</p> </li> <li> <p>Company gratuity scheme.</p> </li> <li> <p>Discretionary bonus program.</p> </li> <li> <p>Annual flight contribution.</p> </li> <li> <p>Transportation &amp; housing allowances.</p> </li> <li> <p>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition.</p> </li> </ul> <p>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</p> <p> </p> About AtkinsR alis <p> </p> <p>We're AtkinsR alis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people.</p> <p> Find out more. </p> <p> <b>#RailME </b> </p> <p> </p> <b>Worker Type</b> Employee<p> </p> <b>Job Type</b> Regular<p> </p> <p> <i>At </i> <i>AtkinsR alis</i> <i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. </i> </p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a highly skilled and experienced Structural Engineer to join our team, supporting the delivery of high-quality engineering solutions within railway projects. This requires to assess technically civil structures such as bridges and culverts, as well as building structures for railway related facilities. This role will be responsible for reviewing technical documentation and supervision of the construction works related with its disciplines for new and updated assets of railway facilities. The successful candidate will perform detailed review of documentation including design drawings and reports, shop drawings and as-build documentations ensuring full compliance with applicable standards and requirements, ensuring robust and compliant engineering outcomes.</p><p>Your role</p><ul><li>Provide expert guidance and oversight on all structural engineering aspects of transportation projects, ensuring compliance with requirements, local regulations and international standards, from conceptualization to completion.</li><li>Collaborate closely with the design and construction teams to review and evaluate structural drawings, specifications, and calculations.</li><li>Conduct thorough site inspections to assess structural integrity, identify potential risks, and propose effective solutions to mitigate them.</li><li>Monitor the progress of structural works on-site, ensuring adherence to approved designs, specifications, and quality standards.</li><li>Work closely with contractors, subcontractors, and suppliers to resolve any structural-related issues or challenges encountered during construction.</li><li>Review and approve method statements, shop drawings, and material submittals related to structural works.</li><li>Conduct regular structural assessments and provide recommendations for strengthening or modification as necessary.</li><li>Prepare comprehensive reports, documentation, and correspondence related to structural engineering activities.</li><li>Act as a technical liaison between the project team, clients, and relevant authorities, addressing any structural-related queries or concerns promptly.</li><li>Collaborating with cross-functional teams, including designers, contractors and project managers, commercial staff, and project controls team to develop project plans and budgets.</li><li>Interface with internal and external stake holders as required.</li><li>Ensuring projects meet specifications, deadlines, and quality standards.</li><li>Review the technical documentation related with the discipline for completeness and compliance with the project requirements, interface, stakeholder requirements and applicable standards. These will include, not limited to, design submissions at different stages, shop drawings, as-built drawings, calculations, assessments, technical specifications, interface documents, value engineering reports, material requests, system code classifications, bill of quantities.</li><li>Contribute to produce multidisciplinary reviews of the technical documents to ensure full coordination of the deliverables.</li><li>Participate in producing and reviewing value engineering proposals.</li><li>Conduct quality inspections and oversee the installation, testing and commissioning of structural works, ensuring compliance with safety standards and regulations.</li><li>Monitor and report on project progress, identifying and addressing potential issues, and deviations from the baseline(s), in collaboration with the Project Control Teams.</li><li>Report regularly in accordance with the project and company policies.</li><li>Ensure adherence to the project and company quality program and policies.</li><li>Stay updated on the latest engineering technologies and best practices.</li><li>Provide technical support and guidance to project teams.</li><li>Promote culture of safety.</li><li>Perform walkdowns, attend site visits and meetings as required.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Engineering degree from a reputable institution in Structural. Master's degree is a plus. A minimum of 12 years of experience in structural engineering, preferably combining construction supervision and technical review. Experience performing engineering work in accordance with railway systems procedures, standards, and practices, and KSA regulatory requirements. Good knowledge of the fire protection aspects and requirements applicable to structural assets. Knowledge of environmental and sustainability practices in engineering. Working knowledge of/experience using structural codes and standards applicable to railway systems in KSA, including not limited to Saudi Building Code, Civil Defence requirements, NFPA standards. Experience in analysis of project requirements and check for their implementation in technical documentation and in the site works, through site inspections and testing processes. Strong problem-solving abilities and the ability to make decisions in dynamic project environments. Good communication skills for effective collaboration with project teams and stakeholders. Detail-oriented with a focus on delivering high-quality structural outcomes.</p><p></p></section>

<p>Java Backend Engineer ( Saudi National ONLY)</p><p>&nbsp;</p><p>Location: Dhahran, Saudi Arabia (on-site)</p><p>Salary: SAR 7,000–11,000/month</p><p>Contract: 3–6 months, possible full-time conversion</p><p>Experience: Minimum 3 years</p><p>&nbsp;</p><p>We are building an enterprise AI voice solution for one of the world's largest companies and need an experienced Java Backend Engineer to join the team immediately.</p><p>&nbsp;</p><p>Requirements:</p><p>- Saudi national</p><p>- Completed Bachelor's degree in CS, Software Engineering or related field</p><p>- Minimum 3 years of professional Java backend experience</p><p>- Strong Java and Spring Boot</p><p>- REST API development and integration</p><p>- Relational databases and SQL</p><p>&nbsp;</p><p>Preferred:</p><p>- Enterprise system integrations (SAP, CRM, ERP)</p><p>- WebSockets or real-time applications</p><p>- Exposure to AI services or voice technology</p><p>&nbsp;</p><p>No Iqama sponsorship or transfer available.</p><p>Immediate joiners preferred.</p>

<b>Join Our Team as a Sales Engineer!</b><br>We are currently seeking an experienced Sales Engineer who possesses a strong background in dealing with SABIC, ARAMCO, and their affiliated companies. This is an excellent opportunity to work with industry leaders and contribute to exciting projects.<br><br><b>Requirements:</b><ul><li>5—7 years of industrial sales experience</li><li>Experience with SABIC &amp; ARAMCO vendor systems and projects</li><li>Strong communication and negotiation skills</li><li>Valid Saudi driving license</li><li>Transferable Iqama (for non-Saudi candidates)</li></ul>We encourage all interested candidates to apply.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Description</p><p>Job Title: Site Engineer (Fit-Out)</p><p>Experience Required: 3 5 Years</p><p>Job Summary</p><p>We are looking for a Junior Site Engineer with fit-out experience to support daily site operations and ensure the successful execution of interior fit-out works in accordance with project specifications, quality standards, and project schedules.</p><p>Key Responsibilities</p><ul><li>Supervise daily site activities and subcontractors.</li><li>Ensure proper execution of fit-out works including finishes, joinery, doors, ceilings, and flooring.</li><li>Coordinate with the HSE team to ensure safe execution of site activities.</li><li>Inspect delivered materials and verify compliance with approved specifications.</li><li>Monitor material availability and report shortages.</li><li>Coordinate equipment allocation and utilization on site.</li><li>Support coordination between subcontractors and project teams.</li><li>Assist in the preparation and execution of mock-ups.</li><li>Report progress, risks, delays, and site issues to the Construction Manager / Project Manager.</li><li>Prepare and submit daily site reports.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Qualifications Requirements</p><ul><li>Bachelor's degree or diploma in Civil Engineering, Construction Management, Architecture, or related field.</li><li>3 5 years of experience in fit-out construction projects.</li><li>Fit-out construction experience is mandatory.</li><li>Strong knowledge of finishes, joinery, ceilings, flooring, and interior works.</li><li>Ability to read and interpret construction drawings.</li><li>Strong site supervision and coordination skills.</li><li>Good communication and reporting abilities.</li><li>GCC experience preferred.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> </p> <p><b>Overview</b></p> <p> </p> <p>We are seeking a highly motivated Assistant Resident Engineer (Site Operations) to join our dynamic team in the Saudi. The ideal candidate will assist in managing the construction process, ensuring that projects are delivered on time, within budget, and to the highest quality standards. You will work closely with the Resident Engineer and project team, liaising with clients, contractors, and stakeholders.</p> <p> </p> <p><b>Your role</b></p> <ul> <li>Assist the Resident Engineer in overseeing day-to-day construction activities and monitoring progress.</li> <li>Conduct site inspections to ensure compliance with design specifications, safety standards, and quality control measures.</li> <li>Review and approve contractor submissions, including shop drawings, method statements, and material approvals.</li> <li>Maintain accurate project documentation, including daily reports, progress photos, and meeting minutes.</li> <li>Coordinate with project stakeholders, including architects, engineers, and contractors, to resolve any site-related issues.</li> <li>Support the preparation of progress reports and presentations for management and clients.</li> <li>Ensure compliance with local regulations, standards, and environmental policies.</li> <li>Participate in project meetings and provide technical input as required.</li> </ul> <p> </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><b>Job Description</b></p> <p> </p> <p>NA</p> <p> </p> <p><b>About you</b></p> <ul> <li>Bachelor's degree in Civil Engineering or a related field.</li> <li>Minimum 5 years of relevant experience in the Saudi, specifically within consultancy roles.</li> <li>Over all 10+ years mandatory.</li> <li>Strong understanding of construction processes, contract management, and relevant engineering principles.</li> <li>Excellent communication and interpersonal skills.</li> <li>Proficiency in engineering software and tools (e.g., AutoCAD, MS Office).</li> <li>Strong organizational skills and the ability to manage multiple tasks simultaneously.</li> <li>Knowledge of local construction regulations and standards in the Saudi.</li> </ul> <p> </p><p></p></section>

<b>Join Measurement Methods Technology Company as a Sales Engineer!</b><br>We are seeking a dedicated and skilled Sales Engineer to join our team in Al Khobar. Measurement Methods Technology specializes in delivering precision measurement devices and advanced technological solutions. Our focus on innovation and quality supports a range of industries, and we are committed to providing tailored solutions that enhance operational efficiency.<br><br><b>Role Overview</b><br>As a Sales Engineer, you will be pivotal in identifying client needs and offering tailored technical solutions. This full-time position requires you to engage with existing and prospective clients to understand their requirements and deliver exceptional service.<br><br><b>Key Responsibilities:</b><ul><li>Identify and develop new business opportunities in Jeddah and the Western Region.</li><li>Promote and sell testing and measurement equipment.</li><li>Provide tailored technical solutions that meet customer needs.</li><li>Deliver professional technical presentations and product demonstrations.</li><li>Offer pre-sales and after-sales technical support.</li><li>Build and maintain strong, long-term customer relationships.</li><li>Collaborate with internal teams to ensure successful project execution.</li><li>Ensure customer satisfaction through effective follow-up.</li></ul><br><b>Qualifications:</b><ul><li>Bachelor’s degree in Mechanical Engineering or Electrical Engineering.</li><li>3–5 years of experience in sales of testing and measurement equipment.</li><li>Strong background in Sales Engineering and solution-based selling.</li><li>Excellent communication and customer relationship skills.</li><li>Ability to convey technical concepts clearly to clients.</li><li>Experience in technical support and troubleshooting is a plus.</li><li>Familiarity with the Eastern area is preferable.</li><li>Ability to thrive in a fast-paced, target-driven environment.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Mechanical Engineer Static Subject matter expert with 18+ years’ experience in Greenfield and Brownfield projects, conceptual, FEED and strong experience in EPC detail engineering projects, expertise in equipment’s such as pressure vessels, scraper traps, columns, reactors, heat exchangers, storage tanks, flare tips, skid packages, overhead cranes, Air coolers, material handling systems and also pump packages, handling. Should have worked as lead engineer in EPC project, experience in preparing and developing mechanical datasheets, equipment specifications, enquiry and purchase requisitions, handling technical clarifications and conducting comprehensive technical bid evaluations. Experience in coordinating and participating in vendor and client meetings, reviewing piping layouts, isometrics, and P&amp;IDs, and working closely with construction for follow on engineering support, commissioning, and start-up teams to resolve engineering challenges. To be Well-versed in international codes and standards including ASME, API, TEMA, PED, ASCE, and WRC, with familiarity in Saudi Aramco, GCC and international client’s project experience. Experience in Software like Compress, PV Elite, TANK, Aspen Tech, AutoCAD, AVEVA Engineering, Navisworks. </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>18+ years’ experience in Greenfield and Brownfield projects, conceptual, FEED and strong experience in EPC detail engineering projects, expertise in equipment’s such as pressure vessels, scraper traps, columns, reactors, heat exchangers, storage tanks, flare tips, skid packages, overhead cranes, Air coolers, material handling systems and also pump packages, handling. Should have worked as lead engineer in EPC project</p><p></p></section>

<p>Location: Dhahran, Saudi Arabia (on-site)</p><p>Salary: SAR 7,000–11,000/month</p><p>Contract: 3–6 months, possible full-time conversion</p><p>Experience: Minimum 3 years</p><p>&nbsp;</p><p>We are building an enterprise AI voice solution for one of the world's largest companies and need an experienced Integration Engineer to connect our AI agents with enterprise backend systems.</p><p>&nbsp;</p><p>Requirements:</p><p>- Saudi national</p><p>- Completed Bachelor's degree in CS, Software Engineering or related field</p><p>- Minimum 3 years of professional experience in software engineering or systems integration</p><p>- Strong REST API and WebSocket experience</p><p>- Experience integrating multiple applications and backend systems</p><p>- Java, Node.js, or Python backend experience</p><p>&nbsp;</p><p>Preferred:</p><p>- Experience with SAP, CRM, ERP or enterprise middleware</p><p>- AI agents, voice AI, STT/TTS, or LLM integrations</p><p>- Real-time or communication applications</p><p>&nbsp;</p><p>No Iqama sponsorship or transfer available.</p><p>Immediate joiners preferred.</p>

<b>Join YES Machinery as a Sales Engineer!</b><br>Are you ready to elevate your career with a leading industrial machinery solutions provider? YES Machinery specializes in delivering innovative equipment to various industries across the UAE and GCC, and we are looking for a dynamic Sales Engineer to join our team focusing on the Saudi Arabian market.<br><br><b>Position Overview:</b><br>The Sales Engineer will be responsible for driving sales growth and developing new business opportunities while maintaining strong relationships with clients in the industrial sector. Your technical knowledge of machinery and engineering solutions, combined with excellent sales skills, will be key to your success in this role.<br><br><b>Key Responsibilities:</b><ul><li>Identify and develop new business opportunities across the Saudi market.</li><li>Generate leads and convert them into long-term customers.</li><li>Conduct client meetings, technical presentations, and product demonstrations.</li><li>Understand customer requirements and recommend suitable machinery solutions.</li><li>Prepare quotations and proposals, following up for order finalization.</li><li>Coordinate with internal teams for pricing, delivery, and project execution.</li><li>Maintain strong relationships with existing clients and key accounts.</li><li>Achieve monthly, quarterly, and annual sales targets.</li><li>Monitor market trends and competitor activities.</li><li>Maintain accurate sales reports and forecasts.</li><li>Provide after-sales support when required.</li><li>Ensure customer satisfaction through timely response and service coordination.</li></ul><br><b>Requirements:</b><br><b>Experience:</b><ul><li>Minimum of 3 years of sales experience in the Saudi Arabian market.</li><li>Background in industrial machinery or engineering product sales.</li></ul><br><b>Technical Skills:</b><ul><li>Understanding of industrial machinery and technical products.</li><li>Ability to read and understand technical specifications.</li><li>Strong negotiation and closing skills.</li><li>Proficiency in MS Office and CRM tools.</li></ul><br><b>Preferred Skills:</b><ul><li>Strong communication and interpersonal skills.</li><li>Customer-focused and result-driven mindset.</li><li>Ability to work independently in a regional market.</li><li>Strong networking ability in KSA industrial sectors.</li><li>Arabic language skills are an advantage.</li><li>GCC driving license preferred.</li></ul>

<b>Join Refrigeration House Group as a Sales Engineer!</b><br>Are you ready to take your sales expertise to the next level in the HVAC industry? At Refrigeration House Group, a rapidly growing HVAC company in Saudi Arabia, we are looking for a Sales Engineer to join our dedicated team. With over 600 employees and a commitment to exceptional quality, we support various sectors including wholesale and retail of HVAC and refrigeration products.<br><br><b>Role Overview:</b><br>This full-time on-site position in Al Khobar involves identifying and cultivating client relationships, presenting technical solutions, and supporting the sales process. Your responsibilities will include:<br><ul><li>Providing technical support and addressing customer inquiries.</li><li>Preparing proposals and coordinating with internal teams to ensure customer satisfaction.</li><li>Collaborating with the sales team to meet targets and align technical expertise with business objectives.</li></ul><br><b>Qualifications:</b><br>Ideal candidates should possess:<br><ul><li>Expertise in Sales Engineering with the ability to identify customer needs.</li><li>Proficiency in Technical Support and Communication.</li><li>Strong Customer Service skills.</li><li>A Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related field.</li><li>Experience in the HVAC or refrigeration industry is an advantage.</li><li>Proactive problem-solving skills.</li></ul><br>Join us and contribute to our continued success in exceeding client expectations!

<b>Join Our Team as a Project Sales Engineer!</b><br>At AsasAlJood, we are seeking a driven and technically strong Project Sales Engineer to become a vital part of our growing team. This role offers a unique opportunity to support our project sales activities while building strong client relationships across assigned accounts and sectors.<br><br><b>Key Responsibilities:</b><ul><li><b>Sales &amp; Market Development:</b><ul><li>Identify and develop new project opportunities.</li><li>Conduct regular client visits and technical discussions.</li><li>Monitor RFQs and support opportunity qualification.</li><li>Maintain CRM updates and manage sales pipeline.</li></ul></li><li><b>Proposal Preparation &amp; Technical Support:</b><ul><li>Review technical requirements and prepare compliance documents.</li><li>Coordinate with OEMs, suppliers, and clients for quotations.</li><li>Prepare cost calculations and techno-commercial proposals.</li><li>Ensure timely and accurate submission of proposals.</li></ul></li><li><b>Commercial Support:</b><ul><li>Assist in pricing and margin analysis.</li><li>Support negotiation preparation.</li><li>Follow up on submitted quotations.</li><li>Handle technical and commercial clarifications.</li></ul></li><li><b>Internal Coordination:</b><ul><li>Work closely with engineering, procurement, and service teams.</li><li>Support smooth handover of awarded projects.</li><li>Track order progress and client feedback.</li></ul></li></ul><br><b>What We’re Looking For:</b><ul><li>Bachelor’s degree in mechanical engineering or related field (PMP is a plus).</li><li>3–6 years of experience in technical sales (preferably rotating equipment/industrial services).</li><li>Proficiency in project lifecycle management and technical understanding relevant to industrial equipment and solutions.</li><li>Strong technical and commercial understanding.</li><li>Excellent communication and client-facing skills.</li><li>Fluency in Arabic &amp; English.</li><li>Willingness to travel and valid driver’s license.</li><li>Strong problem-solving abilities, attention to detail, and capability to work collaboratively.</li></ul>