Machine operator Jobs

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>1. Equipment Operation: - Operate and monitor gas turbines, steam turbines, heat recovery steam generators (HRSG), and auxiliary systems according to established procedures and safety protocols.<br> - Perform regular inspections of equipment to ensure operational integrity and optimal performance.<br> 2. Safety and Compliance: - Follow all health and safety regulations, adhere to company policies, and promote a culture of safety among fellow operators.<br> - Participate in safety drills and training sessions to maintain a high level of awareness regarding safety practices.<br> -Support in local isolations and Permit to Work compliance -Safety Incident reporting -Work as Emergency Response team member.<br> 3. Monitoring and Reporting: - Monitor operational parameters using local instruments, control panels and data acquisition systems, ensuring that equipment operates within specified limits.<br> - Report any anomalies or deviations to the Control Room Operator (CRO) or Shift Supervisor in a timely manner.<br> 4. Start-Up and Shutdown Procedures: - Assist in the start-up and shutdown of gas turbines, HRSGs, STs and other plant systems, following established operational protocols.<br> - Execute emergency procedures as necessary in response to alarms or operational disturbances.<br> 5. Coordination with Control Room: - Collaborate closely with the control room team, communicating real-time operational status and receiving instructions as required.<br> - Actively participate in defect identification and recording, shift handovers, ensuring that all relevant information about operational conditions is conveyed.<br> 6. Routine Maintenance and Inspection: - Perform routine maintenance tasks as directed, including cleaning and lubrication of equipment.<br> - Conduct visual inspections, check fluid levels, and perform minor adjustments to maintain efficient operation.<br> 7. Documentation: - Maintain accurate records of operational activities, equipment status, and incidents in log sheets, logbooks or computerized systems.<br> - Provide input for operational reports and participate in analysis of operational data to identify trends or issues.<br> 8. Continuous Improvement: - Identify and recommend opportunities for improving operational efficiency and reliability.<br> - Engage in training and development programs to enhance technical skills related to Siemens gas turbines and power plant operations.<br> - Education: High school diploma or equivalent; technical diploma or degree in mechanical, electrical, or industrial engineering is preferred.<br> - Experience: Minimum of [X] years of experience in power plant operations, with specific experience in operating gas turbines, preferably Siemens models.<br> - Technical Knowledge: Understanding of combined cycle power generation, turbine operation, and related systems and technologies.<br> Skills: - Proficient in the use of monitoring and control systems relevant to power generation.<br> - Strong problem-solving skills with a focus on safety and operational integrity.<br> - Effective communication and teamwork skills, with the ability to collaborate with control room operators and maintenance personnel.<br> Physical Requirements: - Ability to work in a challenging industrial environment, including exposure to high temperatures, noise, and rotating machinery.<br> - Willingness to work shifts, including nights, weekends, and holidays as required.<br></span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

For our HOYER Middle East office in Al-Jubail, we are looking for a Plant Operator (m/f/d).<br>The operational staff member is responsible for tank farm operation, tanker/ truck loading and unloading, filling and warehouse activities. He is performing the day to day tasks as described below:<br>General requirements:Following the work instructions and regulations Following the plant safety standards and PPE requirements (awareness of using PPE’s) Knowledge in spill containment and emergency response Working prudently and according to the requirements Flexibility, punctuality and ability to work in a team.<br>Other activities:Handling of packaging material To assist in Loading and offloading of palletized and non-palletized chemical drums and other stuff from and of containers and trucks using forklifts. To perform drum off-loading from drum-filling conveyor and stacking on pallets in warehouses Daily checks of the forklift truck and reporting in case of damages Carry-out housekeeping of the machine and surrounding areas<br><br>Qualifications and educational requirements High school/ITI (NCVT)/ Diploma certificate holder/ Diploma level Basic Material Knowledge and Sound understanding of Heavy Equipment like Forklift Forklift license is a Must English speaking & writing<br><br>Experience4-6 years of experience in similar job environment e.g. chemical handling Sound awareness about the handling of hazardous chemicals Able to understand MSDS of chemicals Knowledge of compatibility of products/chemicals with each other Candidate can be consider based on the academic details & interview<br>Competence The jobholder should have the competence to make all decisions and take all measures respective to the area of responsibility. Jobholder responsible for every decision made.<br>MAKE MORE THINGS POSSIBLEKarina Oldeman will be looking forward to receiving your job application.karina.oldeman@HOYER-group.com

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>JOB RESPONSIBILITIES &amp; TASKS</strong></p> <ul> <li>Operate machine as per the Work Instructions in order to insure a safe and sound run_x0002_ability.</li> <li>Troubleshoot problems and request support upon need, in order to minimize downtime and improve efficiency.</li> <li>Check and sign winding samples and relay them samples to the section Team Leader for his approval before passing same for QC inspection to ensure quality of the start-up run.</li> <li>Regularly check product quality and provide samples to QC for continuous inspection to ensure a quality run.</li> <li>Report any quality defects to QC and Team Leader to take any necessary action.</li> <li>Fill Repair Request, relay it to the Team Leader for approval, forward it to Maintenance for intervention and validate the repair result once Maintenance reparation is complete.</li> <li>Assign tasks to Helpers and Skilled Helpers to insure an organized run, and sustain the 5S conditions of his machines and surrounding work place.</li> <li>Check and sign product labels and pallet labels to insure that correct packing mode is followed.</li> <li>Fill the Production Report documenting all Production activities, enter related data into the ERP system and by shift end, relay Production Report to Team Leader for checking and approval.</li> <li>Prepare Process Control Cards for new orders and relay them to the Team Leader/Production Engineers for approval in order to insure production consistency.</li> <li>Label left-over Material and mixed left-over formulations prior to dispatching them back to the WH or Material feeding and mixing zones.</li> <li>Ensures that Good Manufacturing Programs are implemented on his machines and report any discrepancies to the team leader/ supervisors.</li> </ul></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Operate and monitor WPC production lines (mixing, extrusion, finishing).</li><li>Adjust machine parameters to ensure product high quality.</li><li>Detect and report minor issues and coordinate with maintenance team.</li><li>Follow safety and quality control procedures at all times.</li><li>Perform maintenance and troubleshooting on WPC production machinery.</li><li>Diagnose and repair electrical and mechanical faults.</li><li>Conduct preventive and routine maintenance.</li><li>Read and interpret electrical and mechanical diagrams.</li><li>Perform precise cutting, shaping, and assembly of WPC door components.</li><li>Handle fabrication, installation, finishing, sanding, trimming, and fitting tasks.</li><li>Read and follow technical drawings and production specifications.</li><li>Ensure high-quality workmanship and adherence to safety standards.</li><li>Collaborate with production and installation teams when required.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Previous experience in industrial production lines (WPC, PVC, plastics preferred).</li><li>Ability to work in shifts.</li><li>Strong attention to small detail and quality QC.</li><li>Knowledge of motors, sensors, control systems, and PLC is an advantage.</li><li>Strong problem-solving skills and ability to work under pressure.</li><li>Proven experience in carpentry (WPC, PVC, wood doors, or furniture manufacturing preferred).</li><li>Strong skills in measurement, cutting tools, and assembly techniques.</li><li>Ability to work efficiently and deliver consistent quality.</li><li>Reliability, teamwork, and attention to detail.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Turn Passion into Business.<br> Bring Stranger Soccer to Riyadh.<br> What if you could take something you love—football—and turn it into a sustainable, growing business?<br> At Stranger Soccer, that’s exactly what we’ve made possible.<br> We’re expanding our unique football experience platform to new cities, and we’re looking for a License Owner / Operator in Riyadh to take the reins.<br> This is not a traditional role — it isdesigned for individuals who understands football culture, thrives on building something meaningful, and is ready to own and operate their own venture with the support of a proven global brand.<br> Imagine this: Players in your city scroll through dozens of weekly football games on a mobile app.<br> They book in seconds, show up, and play.<br> Every game delivers a consistent, high-quality experience — because you are making it happen.<br> You are at the center, operating a full football ecosystem for your community.<br> How It Works Stranger Soccer has redefined how people play the world’s most loved sport.<br> Through our technology platform, we make casual football as easy to access as a gym session.<br> Born in Singapore, Stranger Soccer is now open in 10+ cities around the world, with over 100,000 games run.<br> Our model is built for scale — and we’re ready to bring it to Amsterdam.<br> Who We’re Looking For A football enthusiast with strong local insight A strategic thinker with leadership and business experience An entrepreneurial mind ready to operate independently, with full support from HQ Someone who wants more than a job — they want ownership, impact, and results You’ll manage everything from operations to marketing to team recruitment — but you won’t be alone.<br> Our HQ team provides the tools, playbook, and platform to help you succeed.<br> Why This Opportunity Stands Out This isn’t a typical job.<br> It’s a business opportunity for someone with an entrepreneurial mindset to take the reins, lead locally, and build a venture that changes how people experience the beautiful game.<br> Curious? Visit www.strangersoccer.<br>com → Click “Bring Stranger Soccer to Your City” to explore the opportunity and express your interest.<br> Let’s change how the world plays football — one city at a time.<br></span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 12+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>We are looking for experienced sterile manufacturing professional with over 5 years in aseptic liquid compounding. Skilled in CIP/SIP operations, autoclave use, equipment setup, and troubleshooting. Demonstrates strong adherence to GMP, ISO, and SOP standards, with a focus on quality, documentation, and efficiency. Capable of working across all shifts and supporting cross-functional teams in a cleanroom environment.</span></p><br> <ul> <li><span>Perform CIP and SIP for manufacturing and holding tanks</span></li> <li><span>Follow procedures to manufacture products per specifications, schedules, cost, waste, and quality standards</span></li> <li><span>Set up and operate aseptic liquid washing machines safely and accurately</span></li> <li><span>Perform routine cleaning activities</span></li> <li><span>Ensure good documentation practices in recording, maintaining, reviewing, and organizing batch records, forms, documents, and logbooks</span></li> <li><span>Assist other team members in manufacturing areas as needed</span></li> <li><span>Maintain workplace organization and housekeeping standards</span></li> <li><span>Adhere to SOPs, GMP, and ISO regulations</span></li> <li><span>Train and instruct personnel on task execution per SOPs</span></li> <li><span>Available to work day or night shifts (positions on all shifts)</span></li> <li><span>Autoclave operation experience required</span></li> <li><span>Troubleshoot and resolve technical issues in production to minimize rejects</span></li> </ul> <br><ul> <li><span>Minimum 5 years’ experience in sterile liquid compounding</span></li> <li><span>Good commence of English language.</span></li> <li><span>Good oral and written communication skills</span></li> <li><span>Good team and problem solving skills</span></li> <li><span>Initiative and manual dexterity</span></li> <li><span>Ability to work safely and use all material moving equipment in a safe manner.</span></li> <li><span>Basic math skills</span></li> <li><span>Ability to work overtime as necessary</span></li> <li><span>Ability to calculate machine OOE.</span></li> </ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br> <b>Job Duties</b> <br>Under direct supervision, promotes excellent customer relations at the worksite. Performs equipment rig-up and rig-down on at worksite and prepares equipment for performance of job. Ensures customer satisfaction with work performed. Responsible for safe operation of low- pressure/high-pressure pumps, air-compressors, chemical metering, filtration, and ancillary equipment during the delivery of services in accordance with job design and KPI&amp;aposs. Performs necessary calculations at the worksite as needed. Performs data collection, recording, and data distribution on jobs as needed. Coordinates and participates in the clean up, repair, and preparation of equipment for the next job. Utilizes competency processes to enhance skills development and job performance. Job tasks, correctly performed, impact directly on cost containment, efficiency and profitability of operations. Skills are typically acquired through completion of HES career development requirements as Operator Assistant ll. Skills are typically acquired by (6mos.) - 2 years PSL experience. Must possess good skills within the service line and have a general understanding of other service functions. Must be knowledgable of HMS and HSE standards, and guidelines for PSL personnel. Valid license to drive motor vehicles is required. Promotes safety awareness and environmental consciousness. Promotes and takes an active part in quality improvement processes (QIP). Consequences of error are easily measured and can be confined.<br><br><b>Qualifications</b> <br><br><br><p><b>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</b>.</p><br> <p><b><u>Location</u></b></p><br> <p>Jubail Highway Abu Hadria Exit,&nbsp;Al-Khobar,&nbsp;Al Khobar,&nbsp;31952, Saudi Arabia</p><br> <p><b><u>Job Details</u></b></p><br> <p><b>Requisition Number:</b>&nbsp;206173&nbsp;&nbsp;<br> <b>Experience Level:&nbsp;</b>Experienced Hire&nbsp;<br> <b>Job Family:</b>&nbsp;Operations&nbsp;<br> <b>Product Service Line:&nbsp;</b>Pipeline and Process Services&nbsp;&nbsp;&nbsp;<br> <b>Full Time / Part Time:&nbsp;</b>Full Time</p><br> <p><b>Additional Locations for this position:&nbsp;</b></p><br> <p><u><b>Compensation Information</b></u><br> Compensation is competitive and commensurate with experience.</p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Department - Casting Shop Reports to - Molding Engineer Job Purpose Highly experienced Pouring Operator responsible for preparation and safe pouring of molten metal using teapot ladles, stopper rod pouring box and slide gate ladles for medium to heavy and critical castings such as valves, pumps, impellers, turbine casings, and other complex components. The role includes ladle preparation, pouring box preparation, stopper rod fixing, nozzle setting, refractory maintenance, and ensuring safe pouring to produce the high-quality castings as per foundry SOP and safety standards.</p><p>Job Responsibilities Operational Duties Perform molten metal pouring using teapot ladle, stopper rod pouring box and slide gate ladle for medium to heavy castings. Prepare ladles before pouring, including refractory lining inspection, patch repair, and proper drying/preheating. Carry out nozzle setting, slide gate assembly fixing, and alignment to ensure smooth metal flow. Check ladle refractory condition, stopper head, slide plates, and seating area before every heat. Handle and pour various grades including alloy steel, stainless steel, carbon steel, and ductile iron. Maintain correct pouring temperature, slag control, and steady metal stream to prevent casting defects. Follow approved pouring sequence, heat number identification, and mould marking system. Monitor slide gate operation and metal level during pouring. Coordinate with melting, moulding, and quality departments for smooth production. Ensure strict adherence to safety procedures to prevent spillage and metal-related hazards. Maintain pouring and ladles and pouring boxes maintenance records.</p><p>Safety Responsibilities Follow PPE requirements (face shield, gloves, safety shoes, ear protection, Aluminized suit etc.). Ensure safe handling of heavy castings liquid metal using cranes and lifting tools. Remove slag from ladles and maintain housekeeping around grinding area. Report unsafe conditions, tool damages, or machine any abnormalities.</p><p>Key Performance Indicators (KPIs) KPIs Pouring Operator Maintain pouring defects within limits. Achieve high RFT without rework. Control pouring temperature as specified. Ensure proper ladle preparation before each heat. Prevent slide gate leakage and nozzle choking. Minimize metal spillage and improve yield. Meet shift heat and tonnage targets. Maintain zero accidents and full PPE compliance. Reduce pouring-related downtime. Follow SOP and maintain proper records.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Education</h2><p>Minimum ITI / Technical Diploma in Foundry Technology, Mechanical, Metallurgy, or related field. Secondary School Certificate (10th / 12th) with strong practical foundry experience will also be considered. Basic knowledge of metallurgy, temperature control, and safety standards is preferred.</p><h2>Experience</h2><p>Minimum 5-10 years of experience as Pouring Operator in steel and iron foundry. Proven experience in pouring critical castings like valves, pumps, impellers, turbine casings, and other heavy engineering castings. Hands-on experience in ladle refractory lining, nozzle setting, slide gate mechanism maintenance, and ladle preparation. Experience handling alloy steel, stainless steel, carbon steel, and ductile iron grades.</p><h2>Skill Requirements</h2><p>Strong knowledge of refractory materials and ladle preparation practices. Good understanding of pouring-related defects and prevention methods. Ability to troubleshoot nozzle choking, slide gate leakage, and metal flow issues. High safety awareness in molten metal handling operations. Physically fit to work in high-temperature foundry environment.</p><h2>Physical &amp; Work Conditions</h2><p>Ability to work in foundry environment (heat, dust, noise). Physically fit to handle the ladles especially while in hot condition.</p><h2>Behavioral &amp; Safety Requirements</h2><p>Good English communication skills to coordinate with production and quality teams High attention to detail and discipline in testing frequency Awareness of foundry safety practices and PPE usage Ability to work in shift operations and shop-floor environment</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Operate Crawler Cranes (250 Ton and above) and ATF Mobile Cranes (100 Ton and above) for lifting and moving heavy materials</p> <p>Perform daily equipment inspections and complete pre-operational checklists</p> <p>Interpret load charts and carry out load sharing calculations to ensure safe lifting operations</p> <p>Follow all site safety procedures and operational guidelines</p> <p>Coordinate with team members and supervisors to execute lifting plans safely and efficiently</p> <p>Monitor equipment performance and report any issues or maintenance requirements</p> <p><strong>WHAT YOU LL NEED</strong></p> <p>Minimum 5+ years of experience in crane operation</p> <p>Preferable to have experience with the following cranes: 1) 160T - mobile Sany 2) 250T - mobile Sany 3) 500T - mobile Sany 4) 400T - crawler Sany 5)250T - crawler Sany</p> <p>Proven experience with Crawler Cranes (250 Ton and above) and ATF Mobile Cranes (100 Ton and above)</p> <p>Good understanding of load charts/load sharing and lifting operations</p> <p>Ability to perform and document checklists and inspections</p> <p>Basic English communication skills</p> <p>Strong commitment to safety and attention to detail</p> <p>Ability to work in demanding construction or industrial environments</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Experienced and safety-driven Crane Operator with over 5 years of expertise in operating heavy equipment, including Crawler Cranes and ATF Mobile Cranes. Adept at executing lifting operations efficiently while maintaining strict adherence to safety standards. Strong knowledge of load handling procedures, pre-operational inspections, and effective communication in English.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview We Are PepsiCo PepsiCo products are enjoyed by consumers more than one billion times a day in more than 200 countries and territories around the world. PepsiCo generated more than $79 billion in net revenue in 2021, driven by a complementary beverage and convenient foods portfolio that includes LAY’S ®️, DORITOS ®️, CHEETOS ®️, GATORADE ®️, PEPSI ®️, QUAKER ®️ and more. PepsiCo's product portfolio includes a wide range of enjoyable foods and beverages, including many iconic brands that generate more than $1 billion each in estimated annual retail sales. Guiding PepsiCo is our vision to Be the Global Leader in Beverages and Convenient Foods by Winning with PepsiCo Positive (pep+). pep+ is our strategic end-to-end transformation that puts sustainability and human capital at the center of how we will create value and growth by operating within planetary boundaries and inspiring positive change for planet and people. Our employees drive our culture. No two days are the same; we are dynamic and full of passionate teams that embrace new ideas through our collaborative spirit. At PepsiCo, we know that our company can only succeed when our associates and the society we serve flourishes. We are committed to fostering a diverse workforce by creating a collaborative, equitable and inclusive space where everyone, regardless of what we look like, where we come from or who we love, has a voice. At PepsiCo we create a Space to be y( )u. Learn more about our culture and life at PepsiCo: https://stories.pepsicojobs.com/ Join PepsiCo, dare to transform. Responsibilities JOB PURPOSE The Basic Job of process operator is to run the Process line and equipment’s systematically and effectively. Achieving the production targets by increasing the line efficiency and minimizing the process waste. Gather hourly data of process control checks, conduct quality wall meetings, maintain hygiene and housekeeping. Alert on food safety hazards and high light the issues then and there to the Direct Managers. Summarize the daily material usage and calculate Basic material efficiently, seasoning efficiency and oil efficiency in the daily summary reports. Monitor and minimize the energy usage such as Water, Electricity and gas usage. Manage the process workers working on his assigned stations and maintain the good manufacturing practice at all times within his area. To operate, control and maintain processing equipment to convert raw materials into final product, in accordance with the KPIs PRINCIPAL ACCOUNTABILITIES • Make decisions based on the best possible utilisation to achieve maximum output in terms of yield conversion. • Must be able to repair and maintain the necessary processing equipment to maintain line efficiency. • Has the authority to stop the production process in consultation with the Laboratory Technician if the production is out of specification. • Make decisions based on the best possible utilisation to achieve maximum output in terms of yield conversion. • Must be able to repair and maintain the necessary processing equipment to maintain line efficiency. • Has the authority to stop the production process in consultation with the Laboratory Technician if the production is out of specification. • Running the line systematically and efficiently • perform and report the hourly process control check • Conduct quality wall meeting at the required intervals • Make sure the Raw materials are available for the production run near by the line • Make sure the equipment’s are hygienically maintained • Make sure the equipment’s of his desired work stations are in good working condition • Make sure that the line achieves the required efficiency set by the business • Should achieve the material efficiency target set by the business • Day today issues need to be highlighted to his Direct Managers • Collect and report the material wastages and summarize material usage daily and calculate the material efficiency • Inform Engineering for the equipment maintenance or repair through MP2 • Should manage the process workers working under his line (break time, cleaning during change flavour, time in and time out) • Should maintain his line or work station in good condition at all times, by conducting the proper running patrol. (checklist) • Should report all health hazards within his work place to his immediate Direct Manager. • Make sure that quality products are being produced at all times. • Communicate daily issues and activities to the other shifts • Emphasize team work and cooperation • Support IPS audits &amp; Food safety audits • Effective utilization of energy such as Water, Gas, Electricity etc. • To implement, sustain and participate in the continual improvement of the EHS Management System (MS) at area of responsibility in accordance to the legislations, PepsiCo GEHSMS and relevant EHS standards, ensuring proper controls for all hazards and risks associated with all activities/areas are in place and EHS targets are achieved. Qualifications Knowledge/Skill • Should be at least industrial training institute graduate (ITI). • Basic communication skills. • Should have a good working attitude. • Able to handle and operate the process equipment independently Experience • Must have a minimum of two years working experience in a manufacturing processing environment, this will be waived in lieu of tertiary background. Competencies • Motivational Fit • Teamwork • Communication • Continuous Improvement • Results Focus • Technical Knowledge</p> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 1+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Location: Riyadh, Saudi Arabia<br><br>Thales people architect identity management and data protection solutions at the heart of digital security. Business and governments rely on us to bring trust to the billons of digital interactions they have with people. Our technologies and services help banks exchange funds, people cross borders, energy become smarter and much more. More than 30,000 organizations already rely on us to verify the identities of people and things, grant access to digital services, analyze vast quantities of information and encrypt data to make the connected world more secure.<br><br>We have been present in Saudi Arabia for 40 years and with over 600 employees to date, we are growing rapidly. Together we are delivering our signalling, control and train protection systems for the North –South Railway (NSR), the longest system of it’s kind in the world. Together we are key suppliers of In-flight entertainment and connectivity systems as well as air traffic management solutions in Saudi. We are making Saudi Arabia a safer place by securing the country’s critical infrastructure and e-security solutions that secure the country’s electronic payment systems. Thales has been selected to supply major electronic systems for air defence and the Group also supplied communication and optronic systems for the Army, the Saudi Arabia National Guards and the Air Force.<br><br>Main Tasks And Responsibilities (Key Accountabilities)<br><br>Machine operation: Operate and monitor machine for consistent workflow. Quality Control: Inspect products for defects and extract faulty items from the line. Documentation: Records production data, including output, rejections, downtime, and material usage. Safety and Security Compliance: Adheres to safety, health, and security guidelines (e.g., wearing protective gear, maintaining a clean, orderly workspace). Follow up conducted production plan. Implement Priority matrix.<br><br>Qualification<br><br>Education And Experience<br><br> High School3 years of experience as production operator.<br><br><br>Knowledge/ Skills<br><br>Good Knowledge in MS Excel MS office (it’s an add) Maintenance knowledge (it’s an add) Experience in industrial/ operational / manufacturing industry. Lean Manufacturing Knowledge.<br><br><br>Personal Attributes<br><br>Team player Work dedication With sense of initiative and ownership Adaptability to new tasks / easy learner Good problem-solving skills Ability to work in rotating shifts and in holidays (if needed). (Mandatory) Clear Security record Good oral and written communication skills (preferably can speak and write in both in English and Arabic language)<br><br><br>At Thales we provide CAREERS and not only jobs. With Thales employing 80,000 employees in 68 countries our mobility policy enables thousands of employees each year to develop their careers at home and abroad, in their existing areas of expertise or by branching out into new fields. Together we believe that embracing flexibility is a smarter way of working. Great journeys start here, apply now!

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under direct supervision, performs Job Safety Analysis (JSA) and safety meetings, and the rigging up and down of HWO service line equipment. Assembles and prepares equipment for installation and service. Assists in the running of a job. Maintains general housekeeping, clean up, repair, and preparation of equipment for the next job. Performs pre/post job HWO equipment inspections. Responsible for safe crane and rigging operations during the delivery of services in accordance with Customer&amp;aposs design and KPI&amp;aposs. Operates High Pressure fluid pump and HWO support equipment (flow back package). Performs hydrostatic testing on Blow Out Prevention (BOP) during pre/post job procedures including Preventative Maintenance (PM&amp;aposs). Operates Counter Balance Winch and BOP console. Operates HWO jack under supervision. Mentors peers and trains Operator Assistants. Monitors well control parameters and calculations before and during job applications. Performs and complete preventative maintenance on all HWO associated equipment. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Consequences of error are easily measured and can be confined. Drives a truck or other assigned equipment as required.</p> <p>Skills typically acquired through completion of high school diploma or similar education and typically 6 months experience as Operator Assistant ll. May require a valid Commercial Driver&amp;aposs License. Product Service Line (PSL) specific equipment/job skills required. Must have completed essential math, red book and HWO I training. Given the nature of oil field service work, must possess good interpersonal skills and the ability to communicate effectively with others is necessary. The ability to perform basic mathematical calculations is required. Basic reading comprehension and writing skills are required. Basic computer skills are preferred. Licensure to drive commercial vehicles may be required. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Promotes and takes an active part in the Quality Improvement Process.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>NA</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Location: Riyadh, Saudi ArabiaThales people architect identity management and data protection solutions at the heart of digital security. Business and governments rely on us to bring trust to the billons of digital interactions they have with people. Our technologies and services help banks exchange funds, people cross borders, energy become smarter and much more. More than 30,000 organizations already rely on us to verify the identities of people and things, grant access to digital services, analyze vast quantities of information and encrypt data to make the connected world more secure.We have been present in Saudi Arabia for 40 years and with over 600 employees to date, we are growing rapidly. Together we are delivering our signalling, control and train protection systems for the North –South Railway (NSR), the longest system of it’s kind in the world. Together we are key suppliers of In-flight entertainment and connectivity systems as well as air traffic management solutions in Saudi. We are making Saudi Arabia a safer place by securing the country’s critical infrastructure and e-security solutions that secure the country’s electronic payment systems. Thales has been selected to supply major electronic systems for air defence and the Group also supplied communication and optronic systems for the Army, the Saudi Arabia National Guards and the Air Force.</p><p><b><u><span>Main Tasks and Responsibilities (Key Accountabilities)</span></u></b></p><br><p>Machine operation: Operate and monitor machine for consistent workflow. Quality Control: Inspect products for defects and extract faulty items from the line. Documentation: Records production data, including output, rejections, downtime, and material usage. Safety and Security Compliance: Adheres to safety, health, and security guidelines (e.g., wearing protective gear, maintaining a clean, orderly workspace). Follow up conducted production plan. Implement Priority matrix.</p><br><p><b><u><span>Qualification</span></u></b></p><br><p><b>Education and Experience</b></p><br><ul><li>&nbsp;High School</li><li>3 years of experience as production operator.</li></ul><p><b>Knowledge/ Skills</b></p><br><ul><li>Good Knowledge in MS Excel</li><li>MS office (it’s an add)</li><li>Maintenance knowledge (it’s an add)</li><li>Experience in industrial/ operational / manufacturing industry.</li><li>Lean Manufacturing Knowledge.</li></ul><p><b>Personal Attributes</b></p><br><ul><li>Team player</li><li>Work dedication</li><li>With sense of initiative and ownership</li><li>Adaptability to new tasks / easy learner</li><li>Good problem-solving skills</li><li>Ability to work in rotating shifts and in holidays (if needed). (Mandatory)</li><li>Clear Security record</li><li>Good oral and written communication skills (preferably can speak and write in both in English and Arabic language)</li></ul>At Thales we provide CAREERS and not only jobs. With Thales employing 80,000 employees in 68 countries our mobility policy enables thousands of employees each year to develop their careers at home and abroad, in their existing areas of expertise or by branching out into new fields. Together we believe that embracing flexibility is a smarter way of working. Great journeys start here, apply now! </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Key Duties &amp; Responsibilities</p><ul><li> Operate a wide range of ground support equipment including passenger stairs,</li></ul><p>airconditioning units, airstarter units, aircraft power units, unit load devices, ground power</p><p>units (GPUs), baggage tugs, pallet loaders, man lifts, ramp sweepers, and company trucks.</p><ul><li> Provide full ground operations support similar to the responsibilities of the Ramp and</li></ul><p>Baggage Handling Agent, including baggage loading/unloading and supporting cargo</p><p>shipments.</p><ul><li> Marshal aircraft during arrival and departure and assist with safe aircraft parking and</li></ul><p>securing.</p><ul><li> Load and unload passenger baggage, cargo, and mail from aircraft using appropriate</li></ul><p>ground handling equipment.</p><ul><li> Perform refueling and defueling operations for fixedwing and rotorwing aircraft in</li></ul><p>accordance with established company procedures.</p><ul><li> Transport crew, passengers, and baggage between aircraft and the terminal building when</li></ul><p>required.</p><ul><li> Operate ramp equipment to support passengers with reduced mobility.</li><li> Provide assistance for medical flights, including patient transfer to and from aircraft.</li><li> Monitor fueling facilities, conduct fuel sampling, and perform fueling operations when</li></ul><p>required.</p><ul><li> Assist Aircraft Cleaning Services Agents with interior and exterior cabin cleaning tasks</li></ul><p>when necessary.</p><ul><li> Carry out daily inspections of all assigned ground support equipment, ensure cleanliness,</li></ul><p>and report any deficiencies to the shift supervisor.</p><ul><li> Maintain strong awareness of ramp safety practices and ensure safe operation of light and</li></ul><p>heavy ground equipment.</p><ul><li> Complete all mandatory job-related training as directed by Mukamalah.</li><li> Perform any additional operational or safety-related duties as directed by the Mukamalah</li></ul><p>Representative.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong> Minimum 3 years of experience in aircraft ground handling operations with</strong></p><p><strong>documented GSE qualification.</strong></p><ul><li><strong> Strong English communication (read, write, speak).</strong></li><li><strong> Diploma in Aviation or related field (required).</strong></li></ul><br><ul><li><strong> Preferred certifications:</strong></li><li><strong>GSE Operator License (IATA/GACA)</strong></li><li><strong>Airport/Airside Health &amp; Safety</strong></li><li><strong>First Aid &amp; CPR</strong></li><li><strong>Airside Driving</strong></li><li><strong>SMS Training</strong></li><li><strong>Emergency Response &amp; Airport Security Awareness</strong></li><li><strong>Human Factors Training</strong></li><li><strong> Ability to extend duty hours &amp; work on non-working days during emergencies.</strong></li></ul><br><p></p></section>

Company Description Scorpion Arabia for Contracting Services was established to address the increasing demand for trenchless technology and advanced pipeline services in Saudi Arabia and the wider GCC region. The company focuses on modern, non-invasive construction methods that reduce surface disruption and improve project efficiency. Scorpion Arabia works on infrastructure projects that support regional growth and development, offering specialized expertise in underground pipeline installation and maintenance. Team members gain exposure to large-scale projects, innovative technologies, and industry best practices in a fast-growing market. Role Description The Micro Tunneling Operator is responsible for operating and monitoring micro tunneling machines and associated equipment during underground pipeline installation projects. This full-time, on-site role is based in Saudi Arabia and involves setting up machinery, aligning and launching micro tunneling systems, and ensuring accurate tunnel boring according to project specifications. The operator will inspect equipment, perform basic maintenance, and report any mechanical issues to supervisors or maintenance teams. Daily tasks include checking slurry and guidance systems, recording operational parameters, coordinating with site engineers and crew members, and following safety procedures and environmental standards. The role also requires adherence to project schedules, participation in site briefings, and support for troubleshooting to minimize downtime. Qualifications Experience operating micro tunneling or similar trenchless technology equipment, with strong mechanical aptitude and familiarity with underground pipeline installation. Ability to read and interpret technical drawings, alignment data, and project specifications, including basic understanding of survey and guidance systems. Knowledge of safety procedures for construction sites, confined spaces, and heavy machinery, with commitment to safe work practices and use of PPE. Basic maintenance and troubleshooting skills for mechanical, hydraulic, or electrical components of tunneling equipment. Effective communication and teamwork skills to coordinate with site engineers, supervisors, and crew members from diverse backgrounds. Prior experience in civil construction, utilities, or pipeline projects, preferably within trenchless technology or tunneling operations. Willingness to work on rotational shifts, extended hours, or variable site conditions as required by project schedules. High school diploma or relevant technical/vocational certification in mechanical, civil, or industrial fields; additional training in tunneling or trenchless methods is an advantage. Ability to follow instructions, maintain accurate operational logs, and adapt to new tools or technologies introduced on site.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Overview We Are PepsiCo PepsiCo products are enjoyed by consumers more than one billion times a day in more than 200 countries and territories around the world. PepsiCo generated more than $79 billion in net revenue in 2021, driven by a complementary beverage and convenient foods portfolio that includes LAY S , DORITOS , CHEETOS , GATORADE , PEPSI , QUAKER and more. PepsiCo's product portfolio includes a wide range of enjoyable foods and beverages, including many iconic brands that generate more than $1 billion each in estimated annual retail sales. Guiding PepsiCo is our vision to Be the Global Leader in Beverages and Convenient Foods by Winning with PepsiCo Positive (pep+). Pep+ is our strategic end-to-end transformation that puts sustainability and human capital at the center of how we will create value and growth by operating within planetary boundaries and inspiring positive change for planet and people. Our employees drive our culture. No two days are the same; we are dynamic and full of passionate teams that embrace new ideas through our collaborative spirit. At PepsiCo, we know that our company can only succeed when our associates and the society we serve flourishes. We are committed to fostering a diverse workforce by creating a collaborative, equitable and inclusive space where everyone, regardless of what we look like, where we come from or who we love, has a voice. At PepsiCo we create a Space to be y( )u. Learn more about our culture and life at PepsiCo: https://stories.pepsicojobs.com/ Join PepsiCo, dare to transform. Responsibilities JOB PURPOSE The Basic Job of process operator is to run the Process line and equipment s systematically and effectively. Achieving the production targets by increasing the line efficiency and minimizing the process waste. Gather hourly data of process control checks, conduct quality wall meetings, maintain hygiene and housekeeping. Alert on food safety hazards and high light the issues then and there to the Direct Managers. Summarize the daily material usage and calculate Basic material efficiently, seasoning efficiency and oil efficiency in the daily summary reports. Monitor and minimize the energy usage such as Water, Electricity and gas usage. Manage the process workers working on his assigned stations and maintain the good manufacturing practice at all times within his area. To operate, control and maintain processing equipment to convert raw materials into final product, in accordance with the KPIs PRINCIPAL ACCOUNTABILITIES Make decisions based on the best possible utilisation to achieve maximum output in terms of yield conversion. Must be able to repair and maintain the necessary processing equipment to maintain line efficiency. Has the authority to stop the production process in consultation with the Laboratory Technician if the production is out of specification. Make decisions based on the best possible utilisation to achieve maximum output in terms of yield conversion. Must be able to repair and maintain the necessary processing equipment to maintain line efficiency. Has the authority to stop the production process in consultation with the Laboratory Technician if the production is out of specification. Running the line systematically and efficiently perform and report the hourly process control check Conduct quality wall meeting at the required intervals Make sure the Raw materials are available for the production run near by the line Make sure the equipment s are hygienically maintained Make sure the equipment s of his desired work stations are in good working condition Make sure that the line achieves the required efficiency set by the business Should achieve the material efficiency target set by the business Day today issues need to be highlighted to his Direct Managers Collect and report the material wastages and summarize material usage daily and calculate the material efficiency Inform Engineering for the equipment maintenance or repair through MP2 Should manage the process workers working under his line (break time, cleaning during change flavour, time in and time out) Should maintain his line or work station in good condition at all times, by conducting the proper running patrol. (checklist) Should report all health hazards within his work place to his immediate Direct Manager. Make sure that quality products are being produced at all times. Communicate daily issues and activities to the other shifts Emphasize team work and cooperation Support IPS audits &amp; Food safety audits Effective utilization of energy such as Water, Gas, Electricity etc. To implement, sustain and participate in the continual improvement of the EHS Management System (MS) at area of responsibility in accordance to the legislations, PepsiCo GEHSMS and relevant EHS standards, ensuring proper controls for all hazards and risks associated with all activities/areas are in place and EHS targets are achieved Qualifications Knowledge/Skill Should be at least industrial training institute graduate (ITI). Basic communication skills. Should have a good working attitude. Able to handle and operate the process equipment independently Experience Must have a minimum of two years working experience in a manufacturing processing environment, this will be waived in lieu of tertiary background. Competencies Motivational Fit Teamwork Communication Continuous Improvement Results Focus Technical Knowledge</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Should be at least industrial training institute graduate (ITI). Basic communication skills. Should have a good working attitude. Able to handle and operate the process equipment independently</p><p>Must have a minimum of two years working experience in a manufacturing processing environment, this will be waived in lieu of tertiary background.</p><p>Motivational Fit Teamwork Communication Continuous Improvement Results Focus Technical Knowledge</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Job Overview</strong><br>The Repair Machine Champion (RMC) is responsible for coordinating and executing machine shop repairs for damaged, nonconforming, and rework components. The role provides end-to-end ownership across technical scope, supplier alignment, inspection requirements, documentation, and delivery follow-up to ensure safe, compliant, and timely repair execution. It contributes to improving repair turnaround, reducing OEM dependency, and enabling cost-effective recovery of assets to support operational continuity and cost savings.<br><strong>Responsibilities</strong><br><ul><li>Lead and coordinate the end-to-end repair process for damaged, nonconforming, and rework components, ensuring alignment with operational requirements.</li><li>Review engineering drawings, technical specifications, component condition, and historical repair data to define repair scopes, including methods, limits, and acceptance criteria.</li><li>Act as the primary interface with machine shop suppliers to communicate requirements, expectations, priorities, inspections, and delivery timelines.</li><li>Coordinate with R&amp;M, Engineering, Quality Control, Operations, and Supply Chain to align repair execution, documentation, logistics, and system updates.</li><li>Ensure repaired components are inspected and validated against scope requirements, including dimensional, visual, and NDE inspections where applicable.</li><li>Maintain repair trackers, monitor progress, identify risks or delays, and provide status updates to stakeholders and leadership.</li><li>Support logistics coordination for movement of tools, components, and repaired items to meet operational needs.</li><li>Identify failure trends, supplier performance gaps, and improvement opportunities to enhance quality, cycle time, and cost efficiency.</li><li>Coordinate with global stakeholders to provide accurate repair data, cost impacts, and alignment with the Global Repair Catalog.</li><li>Collaborate with other Repair Machine Champions to share best practices and support development of repair capabilities.</li></ul><strong>Skills</strong><br><ul><li>Strong technical capability in repair assessment, scope definition, and machine shop repair methods.</li><li>Knowledge of machining processes, including turning, grinding, milling, welding, cladding, and surface restoration.</li><li>Ability to interpret engineering drawings, dimensional requirements, material specifications, and quality acceptance criteria.</li><li>Understanding of quality control, quality assurance, NCR management, inspection planning, and release requirements.</li><li>Supplier management, negotiation, follow-up, and cross-functional coordination skills.</li><li>Attention to quality, compliance, documentation accuracy, and traceability.</li><li>Ability to manage multiple priorities in a fast-paced environment with clear ownership and escalation discipline.</li><li>Strong problem-solving and decision-making skills with timely risk escalation.</li><li>Effective written and verbal communication with stakeholders at all levels.</li><li>Proficiency in Microsoft Office (Excel, PowerPoint, Outlook) and familiarity with ERP, NCR, and repair tracking tools.</li></ul><strong>Qualifications</strong><br><ul><li>Bachelor’s degree in Mechanical Engineering or equivalent.</li><li>5–8 years of experience in repair, manufacturing, machine shop operations, R&amp;M, quality, or technical support within drilling tools or oilfield equipment.</li><li>Experience in drilling services, R&amp;M, quality, manufacturing, or supplier repair management environments preferred.</li><li>Knowledge of inspection methods, including dimensional, visual, and NDE, and repair validation practices.</li><li>Experience with supplier qualification, performance monitoring, audits, and repair capability development preferred.</li><li>Awareness of ISO, API, engineering, quality, and HSE standards relevant to repair and manufacturing.</li></ul>#LI-MD1<br><br><br> <p><span>Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation.&nbsp;&nbsp;</span></p><br> <p><span>We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition.&nbsp;&nbsp;</span></p><br> <p><span>Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, world-class team.&nbsp;&nbsp;</span></p><br> <p><span>When you join Weatherford, you instantly feel connected to something bigger – a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other’s successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford.&nbsp;</span></p><br> <p><b><span>Join Us:&nbsp;</span></b></p><br> <p><span>Weatherford is producing energy for today and tomorrow- with global opportunities as unlimited as your sense of adventure. Join us to make an impact on our customers, the industry, and the world.&nbsp;&nbsp;</span></p><br> <p><span>Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.</span></p><br> <br> <br> <br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview We Are PepsiCo PepsiCo products are enjoyed by consumers more than one billion times a day in more than 200 countries and territories around the world. PepsiCo generated more than $79 billion in net revenue in 2021, driven by a complementary beverage and convenient foods portfolio that includes LAY’S ®️, DORITOS ®️, CHEETOS ®️, GATORADE ®️, PEPSI ®️, QUAKER ®️ and more. PepsiCo's product portfolio includes a wide range of enjoyable foods and beverages, including many iconic brands that generate more than $1 billion each in estimated annual retail sales. Guiding PepsiCo is our vision to Be the Global Leader in Beverages and Convenient Foods by Winning with PepsiCo Positive (pep+). Pep+ is our strategic end-to-end transformation that puts sustainability and human capital at the center of how we will create value and growth by operating within planetary boundaries and inspiring positive change for planet and people. Our employees drive our culture. No two days are the same; we are dynamic and full of passionate teams that embrace new ideas through our collaborative spirit. At PepsiCo, we know that our company can only succeed when our associates and the society we serve flourishes. We are committed to fostering a diverse workforce by creating a collaborative, equitable and inclusive space where everyone, regardless of what we look like, where we come from or who we love, has a voice. At PepsiCo we create a Space to be y( )u. Learn more about our culture and life at PepsiCo: https://stories.pepsicojobs.com/ Join PepsiCo, dare to transform. Responsibilities JOB PURPOSE The Basic Job of process operator is to run the Process line and equipment’s systematically and effectively. Achieving the production targets by increasing the line efficiency and minimizing the process waste. Gather hourly data of process control checks, conduct quality wall meetings, maintain hygiene and housekeeping. Alert on food safety hazards and high light the issues then and there to the Direct Managers. Summarize the daily material usage and calculate Basic material efficiently, seasoning efficiency and oil efficiency in the daily summary reports. Monitor and minimize the energy usage such as Water, Electricity and gas usage. Manage the process workers working on his assigned stations and maintain the good manufacturing practice at all times within his area. To operate, control and maintain processing equipment to convert raw materials into final product, in accordance with the KPIs PRINCIPAL ACCOUNTABILITIES  Make decisions based on the best possible utilisation to achieve maximum output in terms of yield conversion.  Must be able to repair and maintain the necessary processing equipment to maintain line efficiency.  Has the authority to stop the production process in consultation with the Laboratory Technician if the production is out of specification.  Make decisions based on the best possible utilisation to achieve maximum output in terms of yield conversion.  Must be able to repair and maintain the necessary processing equipment to maintain line efficiency.  Has the authority to stop the production process in consultation with the Laboratory Technician if the production is out of specification.  Running the line systematically and efficiently  perform and report the hourly process control check  Conduct quality wall meeting at the required intervals  Make sure the Raw materials are available for the production run near by the line  Make sure the equipment’s are hygienically maintained  Make sure the equipment’s of his desired work stations are in good working condition  Make sure that the line achieves the required efficiency set by the business  Should achieve the material efficiency target set by the business  Day today issues need to be highlighted to his Direct Managers  Collect and report the material wastages and summarize material usage daily and calculate the material efficiency  Inform Engineering for the equipment maintenance or repair through MP2  Should manage the process workers working under his line (break time, cleaning during change flavour, time in and time out)  Should maintain his line or work station in good condition at all times, by conducting the proper running patrol. (checklist)  Should report all health hazards within his work place to his immediate Direct Manager.  Make sure that quality products are being produced at all times.  Communicate daily issues and activities to the other shifts  Emphasize team work and cooperation  Support IPS audits &amp; Food safety audits  Effective utilization of energy such as Water, Gas, Electricity etc.  To implement, sustain and participate in the continual improvement of the EHS Management System (MS) at area of responsibility in accordance to the legislations, PepsiCo GEHSMS and relevant EHS standards, ensuring proper controls for all hazards and risks associated with all activities/areas are in place and EHS targets are achieved Qualifications Knowledge/Skill  Should be at least industrial training institute graduate (ITI).  Basic communication skills.  Should have a good working attitude.  Able to handle and operate the process equipment independently Experience  Must have a minimum of two years working experience in a manufacturing processing environment, this will be waived in lieu of tertiary background. Competencies  Motivational Fit  Teamwork  Communication  Continuous Improvement  Results Focus  Technical Knowledge</p> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 1+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Position Title-Operator, Loader</strong></p><p>Reports to- Supervisor, Rig Move</p><br><p><strong>Job Purpose</strong></p><p>The main purpose of the Operator, Loader position is to operate loading equipment in a safe and effective manner to deliver upon client and/or AMHEC requirements and minimize the risk of property damage, injury, or loss of life.</p><br><p><strong>Duties and Responsibilities</strong></p><ul><li><p>Operate different types of wheel loader / forklift depending on the specific requirements of the job.</p></li><li><p>Understand and follow safety protocols and procedures while operating the wheel loader / forklift to ensure the safety of personnel and equipment.</p></li><li><p>Conduct pre-operational checks on the wheel loader / forklift to ensure it is in proper working condition.</p></li><li><p>Perform routine maintenance on the wheel loader / forklift, such as lubricating parts, checking hydraulic systems, and replacing worn-out components.</p></li><li><p>Report any malfunctions or defects to his direct supervisor and coordinator, operations for timely repairs.</p></li><li><p>Determine the weight and dimensions of the load to be lifted and precisely and accurately position heavy loads, particularly when working in confined spaces or in proximity to existing structures.</p></li><li><p>Rig the load properly, attaching slings, hooks, or other lifting devices as needed.</p></li><li><p>Lift and move loads to specified locations with precision, considering environmental factors and potential obstacles.</p></li><li><p>Maintain clear and constant communication with ground personnel, signalers, and other team members using hand signals, two-way radios, or other communication devices, where applicable.</p></li><li><p>Follow instructions from truck pushers, supervisors and work collaboratively with the rig move team.</p></li><li><p>Adhere to AMHEC’s policies, procedures, and safe work instruction.</p></li><li><p>Identify and mitigate potential hazards in the wheel loader / forklift operating area.</p></li><li><p>Participate in safety meetings and training sessions to stay updated on best practices and regulations.</p></li><li><p>When required, keep accurate records of daily activities, including the type and weight of loads lifted, hours of operation, and maintenance performed.</p></li><li><p>Troubleshoot and resolve operational issues or malfunctions in a timely manner.</p></li><li><p>Sign-off on the Equipment Checklist along with Operations representative and inspector prior to mobilization, as an acknowledgement of receiving in good condition prior to project execution.</p></li><li><p>Check working condition of the wheel loader / forklift and all accessories, daily prior to utilization.</p></li><li><p>Perform safety and maintenance checks as per the loading equipment guidelines.</p></li><li><p>Document daily inspection, safety, and maintenance checks.</p></li><li><p>Complete operation time sheets (of AMHEC and client), daily, in an ethical and diligent manner and obtain approval from the authorized client representative.</p></li><li><p>Coordinate with the Coordinator, Rig Move and truck pushers to submit time sheets, immediately, upon project completion.</p></li><li><p>Clean, maintain and secure all wheel loader / forklift as directed by the equipment operation guidelines.</p></li><li><p>Assemble accessories as per the operation guidelines.</p></li><li><p>Monitor site conditions which could affect loading operation and refuse (using the stop work authority) any operation which is unsafe or could damage the equipment and accessories.</p></li><li><p>Adequately secure and shut down and park the wheel loader / forklift and its accessories, if unattended and, at closure of daily operations.</p></li><li><p>Consider all factors that might reduce load capacity and adjust the load weight to counter such factors including weather and ground conditions.</p></li><li><p>Follow safety guidelines at AMHEC, client and rig sites and must always be in personal protective equipment when in duty.</p></li><li><p>Inform the Truck Pushers, Coordinator, Rig Move of any problems, maintenance, or necessary repairs to the equipment and complete the basic requirements on the Work Order form.</p></li><li><p>Sign-off on the Equipment Checklist along with Operations representative prior to demobilization and at the time of arrival at AMHEC’s Yard, as an acknowledgement.</p></li><li><p>Receive any complaints about operations and quality of service from the client and report the same to the Supervisor, Truck Pushers Coordinator, and Operations in a timely manner.</p></li><li><p>Maintain decorum and respond to AMHEC and all client representatives in a courteous and respectful manner.</p></li><li><p>Participate in all Health, Safety and Environment (HSE) and operator training organized by HSE department.</p></li><li><p>Monitor the fuel usage.</p></li><li><p>Adhere to all employee and process level policies and procedures as per AMHEC’s Business Conduct and Ethics and Operations manual.</p></li><li><p>Make decisions quickly and efficiently to ensure the safety and productivity of the work site.</p></li><li><p>Stay informed about updates to licensing and certification requirements.</p></li><li><p>Performs miscellaneous tasks as assigned by his/her direct manager.</p></li></ul><br><p><strong>HSE Responsibility</strong></p><ul><li><p>Identifies any Health, Safety or Environmental risks and recommends and implements measures and solutions to mitigate these risks.</p></li><li><p>Complies with established health and safety guidelines and procedures and ensures the health, safety and welfare of self and others.</p></li><li><p>Identifies and reports to management any Health, Safety or Environmental risks and makes suggestions to address these risks and cooperate with his/her supervisor’s instructions.</p></li></ul><br><p><strong>QHSE Authority</strong></p><ul><li><p>Contribute to the QMS: to contribute to the effectiveness of the quality management system (QMS) by implementing processes in accordance with their roles and responsibilities.</p></li><li><p>Participate in Training and Apply Competence: to participate in training programs to develop and maintain the necessary competence for their roles, and to apply their competence to perform work activities and contribute to the effectiveness of the QMS.</p></li><li><p>Follow Procedures and Control of Production and Service Provision: to follow documented procedures and work instructions relevant to their work.</p></li><li><p>Report Changes and Nonconformities: to report any changes in their work environment or processes that could affect the conformity of AMHEC's products or services, report any nonconformities and suggest corrective actions to prevent their recurrence.</p></li></ul><br><p><strong>Working Conditions</strong></p><ul><li><p>Nature of work may require working beyond standard working hours.</p></li></ul><br><p><strong>Physical/Travel Requirements</strong></p><ul><li><p>Travel (up to 90%) within the Kingdom of Saudi Arabia to AMHEC’s sites, yards and branches.</p></li><li><p>Maintain physical fitness and agility to operate the controls and respond to changing conditions effectively.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><br></p><ul><li><p>High School Diploma or equivalent.</p></li><li><p>Hands-on experience operating various types of wheel loader / forklift.</p></li><li><p>Possess the necessary licenses and certifications required to operate specific types of wheel loader / forklift i.e. SAG, SPSP, and Saudi Aramco license.</p></li><li><p>Preferably with previous work experience in Oil &amp; Gas, Construction, or a related field with heavy machinery and site conditions.</p></li><li><p>Proficiency in operating wheel loader / forklift is essential.</p></li><li><p>Strong safety awareness and adherence to safety regulations are critical.</p></li><li><p>Effective communication skills in coordinating lifts with ground crews/riggers and relaying information accurately to ensure the safety and efficiency of operations.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Position Title-Operator, Loader</strong></p><p>Reports to- Supervisor, Rig Move</p><br><p><strong>Job Purpose</strong></p><p>The main purpose of the Operator, Loader position is to operate loading equipment in a safe and effective manner to deliver upon client and/or AMHEC requirements and minimize the risk of property damage, injury, or loss of life.</p><br><p><strong>Duties and Responsibilities</strong></p><ul><li><p>Operate different types of wheel loader / forklift depending on the specific requirements of the job.</p></li><li><p>Understand and follow safety protocols and procedures while operating the wheel loader / forklift to ensure the safety of personnel and equipment.</p></li><li><p>Conduct pre-operational checks on the wheel loader / forklift to ensure it is in proper working condition.</p></li><li><p>Perform routine maintenance on the wheel loader / forklift, such as lubricating parts, checking hydraulic systems, and replacing worn-out components.</p></li><li><p>Report any malfunctions or defects to his direct supervisor and coordinator, operations for timely repairs.</p></li><li><p>Determine the weight and dimensions of the load to be lifted and precisely and accurately position heavy loads, particularly when working in confined spaces or in proximity to existing structures.</p></li><li><p>Rig the load properly, attaching slings, hooks, or other lifting devices as needed.</p></li><li><p>Lift and move loads to specified locations with precision, considering environmental factors and potential obstacles.</p></li><li><p>Maintain clear and constant communication with ground personnel, signalers, and other team members using hand signals, two-way radios, or other communication devices, where applicable.</p></li><li><p>Follow instructions from truck pushers, supervisors and work collaboratively with the rig move team.</p></li><li><p>Adhere to AMHEC’s policies, procedures, and safe work instruction.</p></li><li><p>Identify and mitigate potential hazards in the wheel loader / forklift operating area.</p></li><li><p>Participate in safety meetings and training sessions to stay updated on best practices and regulations.</p></li><li><p>When required, keep accurate records of daily activities, including the type and weight of loads lifted, hours of operation, and maintenance performed.</p></li><li><p>Troubleshoot and resolve operational issues or malfunctions in a timely manner.</p></li><li><p>Sign-off on the Equipment Checklist along with Operations representative and inspector prior to mobilization, as an acknowledgement of receiving in good condition prior to project execution.</p></li><li><p>Check working condition of the wheel loader / forklift and all accessories, daily prior to utilization.</p></li><li><p>Perform safety and maintenance checks as per the loading equipment guidelines.</p></li><li><p>Document daily inspection, safety, and maintenance checks.</p></li><li><p>Complete operation time sheets (of AMHEC and client), daily, in an ethical and diligent manner and obtain approval from the authorized client representative.</p></li><li><p>Coordinate with the Coordinator, Rig Move and truck pushers to submit time sheets, immediately, upon project completion.</p></li><li><p>Clean, maintain and secure all wheel loader / forklift as directed by the equipment operation guidelines.</p></li><li><p>Assemble accessories as per the operation guidelines.</p></li><li><p>Monitor site conditions which could affect loading operation and refuse (using the stop work authority) any operation which is unsafe or could damage the equipment and accessories.</p></li><li><p>Adequately secure and shut down and park the wheel loader / forklift and its accessories, if unattended and, at closure of daily operations.</p></li><li><p>Consider all factors that might reduce load capacity and adjust the load weight to counter such factors including weather and ground conditions.</p></li><li><p>Follow safety guidelines at AMHEC, client and rig sites and must always be in personal protective equipment when in duty.</p></li><li><p>Inform the Truck Pushers, Coordinator, Rig Move of any problems, maintenance, or necessary repairs to the equipment and complete the basic requirements on the Work Order form.</p></li><li><p>Sign-off on the Equipment Checklist along with Operations representative prior to demobilization and at the time of arrival at AMHEC’s Yard, as an acknowledgement.</p></li><li><p>Receive any complaints about operations and quality of service from the client and report the same to the Supervisor, Truck Pushers Coordinator, and Operations in a timely manner.</p></li><li><p>Maintain decorum and respond to AMHEC and all client representatives in a courteous and respectful manner.</p></li><li><p>Participate in all Health, Safety and Environment (HSE) and operator training organized by HSE department.</p></li><li><p>Monitor the fuel usage.</p></li><li><p>Adhere to all employee and process level policies and procedures as per AMHEC’s Business Conduct and Ethics and Operations manual.</p></li><li><p>Make decisions quickly and efficiently to ensure the safety and productivity of the work site.</p></li><li><p>Stay informed about updates to licensing and certification requirements.</p></li><li><p>Performs miscellaneous tasks as assigned by his/her direct manager.</p></li></ul><br><p><strong>HSE Responsibility</strong></p><ul><li><p>Identifies any Health, Safety or Environmental risks and recommends and implements measures and solutions to mitigate these risks.</p></li><li><p>Complies with established health and safety guidelines and procedures and ensures the health, safety and welfare of self and others.</p></li><li><p>Identifies and reports to management any Health, Safety or Environmental risks and makes suggestions to address these risks and cooperate with his/her supervisor’s instructions.</p></li></ul><br><p><strong>QHSE Authority</strong></p><ul><li><p>Contribute to the QMS: to contribute to the effectiveness of the quality management system (QMS) by implementing processes in accordance with their roles and responsibilities.</p></li><li><p>Participate in Training and Apply Competence: to participate in training programs to develop and maintain the necessary competence for their roles, and to apply their competence to perform work activities and contribute to the effectiveness of the QMS.</p></li><li><p>Follow Procedures and Control of Production and Service Provision: to follow documented procedures and work instructions relevant to their work.</p></li><li><p>Report Changes and Nonconformities: to report any changes in their work environment or processes that could affect the conformity of AMHEC's products or services, report any nonconformities and suggest corrective actions to prevent their recurrence.</p></li></ul><br><p><strong>Working Conditions</strong></p><ul><li><p>Nature of work may require working beyond standard working hours.</p></li></ul><br><p><strong>Physical/Travel Requirements</strong></p><ul><li><p>Travel (up to 90%) within the Kingdom of Saudi Arabia to AMHEC’s sites, yards and branches.</p></li><li><p>Maintain physical fitness and agility to operate the controls and respond to changing conditions effectively.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><br></p><ul><li><p>High School Diploma or equivalent.</p></li><li><p>Hands-on experience operating various types of wheel loader / forklift.</p></li><li><p>Possess the necessary licenses and certifications required to operate specific types of wheel loader / forklift i.e. SAG, SPSP, and Saudi Aramco license.</p></li><li><p>Preferably with previous work experience in Oil &amp; Gas, Construction, or a related field with heavy machinery and site conditions.</p></li><li><p>Proficiency in operating wheel loader / forklift is essential.</p></li><li><p>Strong safety awareness and adherence to safety regulations are critical.</p></li><li><p>Effective communication skills in coordinating lifts with ground crews/riggers and relaying information accurately to ensure the safety and efficiency of operations.</p></li></ul><p></p></section>