Inspection Engineer Jobs - Dhahran Saudi

<h3 >About the Role</h3> <p >Abdullah A. Al-Barrak &amp; Son Co. is seeking a <strong >Fresh Graduate Safety Engineer</strong> to join a project with Saudi Aramco - SMP in Dhahran. This full-time position is open to recent engineering graduates who possess a strong interest in health, safety, and environmental practices within construction and industrial projects. The role focuses on contributing to the maintenance of workplace safety standards.</p> <h3 >Role Overview</h3> <p >The successful candidate will apply workplace safety principles and demonstrate awareness of safety compliance, hazard identification, and risk management. This position offers an opportunity to develop expertise in ensuring a safe working environment within industrial and construction operations in Dhahran.</p> <h3 >Key Responsibilities</h3> <ul > <li >Coordinate with project teams, contractors, and site supervisors to promote and enforce safety standards.</li> </ul> <h3 >Required Qualifications</h3> <ul > <li >Bachelor's degree in any Engineering discipline.</li> <li >Fresh graduate with 0-1 years of professional experience.</li> </ul> <h3 >Essential Knowledge and Skills</h3> <ul > <li >Strong understanding of workplace safety principles.</li> <li >Awareness of safety compliance, hazard identification, and risk management.</li> <li >Knowledge of health, safety, and environmental practices on construction sites.</li> <li >Knowledge of conducting risk assessments, safety inspections, and incident investigations.</li> <li >Understanding of safety regulations, codes, and company HSE policies.</li> </ul> <h3 >Preferred Attributes</h3> <ul > <li >Project management knowledge is considered a plus.</li> <li >NEBOSH certification is highly preferred.</li> </ul>

<h3 >Overview of the Role</h3> <p >ABIS is seeking a <strong >Fresh Graduate Safety Engineer</strong> to join our team supporting Saudi Aramco - SMP projects in Dhahran. This full-time position is ideal for recent engineering graduates who possess a strong interest in health, safety, and environmental (HSE) practices within construction and industrial project environments. The role focuses on applying fundamental safety principles, ensuring compliance, and contributing to effective risk management strategies.</p> <h3 >Key Responsibilities</h3> <ul > <li >Promote and enforce established safety standards through coordination with project teams, contractors, and site supervisors.</li> <li >Contribute to the implementation of health, safety, and environmental practices on active construction sites.</li> <li >Participate in conducting risk assessments, safety inspections, and incident investigations.</li> <li >Support adherence to relevant safety regulations, industry codes, and company HSE policies.</li> <li >Assist in the identification of potential hazards and contribute to ongoing risk management efforts.</li> </ul> <h3 >Required Qualifications</h3> <ul > <li >Bachelor's degree in any Engineering discipline.</li> <li >Fresh graduate with 0-1 years of professional experience.</li> </ul> <h3 >Essential Skills and Knowledge</h3> <ul > <li >Strong understanding of general workplace safety principles.</li> <li >Awareness of health, safety, and environmental practices specific to construction environments.</li> <li >Knowledge of processes for conducting risk assessments, safety inspections, and incident investigations.</li> <li >Understanding of applicable safety regulations, industry codes, and company HSE policies.</li> <li >Ability to communicate effectively in English, both written and verbal.</li> </ul> <h3 >Preferred Qualifications</h3> <ul > <li >Knowledge of project management principles.</li> <li >NEBOSH certification is highly preferred.</li> </ul> <h3 >Work Environment and Opportunity</h3> <p >This full-time position is based in Dhahran and offers a foundational opportunity for a fresh graduate to commence a career in safety engineering within a significant industrial project context. The role provides exposure to comprehensive health, safety, and environmental practices. Salary for this position will be discussed directly with qualified candidates.</p>

<h3 >Introduction to the Role</h3> <p >Saudi Aramco is seeking a <strong >Safety Engineer for Drilling &amp; Workover Operations</strong> to join its Loss Prevention division. This full-time position offers an opportunity for experienced health and safety professionals to contribute to upstream oil and gas operations across the Kingdom of Saudi Arabia.</p> <h3 >About the Position</h3> <p >As a Drilling &amp; Workover Safety Engineer (HSE) at Saudi Aramco, the successful candidate will function as a frontline safety officer. The role encompasses upstream oil and gas operations, including petroleum engineering, exploration, drilling and workover activities, unconventional resources, and seismic operations. This covers both onshore and offshore facilities located in various cities across the Kingdom, such as Buqayq, Riyadh, Ras Tannurah, Dhahran, Jeddah, Yanbu, and Jazan.</p> <h3 >Core Responsibilities</h3> <ul > <li >Implement and manage the Saudi Aramco Safety Management System (SMS) across drilling and workover operations.</li> <li >Inspect onshore and offshore drilling rigs, workover equipment, and support facilities.</li> <li >Apply in-depth knowledge of well control equipment and procedures.</li> <li >Identify, evaluate, and mitigate critical safety risks, including work at height, LOTO/isolation, permit-to-work, H2S, confined space entry, and excavations.</li> <li >Conduct PHAs, HAZOPs, JSAs, compliance reviews, incident investigations, and insurance surveys.</li> <li >Develop and review corporate safety standards and procedures for upstream operations.</li> <li >Review oil and gas field facility designs for compliance with company and industry HSE standards.</li> <li >Develop and support Emergency Response Plans (ERPs) and attend emergency drills as an observer.</li> <li >Respond to emergency situations and incidents during and outside regular working hours.</li> <li >Investigate all incidents, determine root causes, and implement corrective actions to prevent recurrence.</li> <li >Deliver Loss Prevention training to employees, contractors, and external parties.</li> <li >Mentor junior HSE and loss prevention personnel.</li> </ul> <h3 >Candidate Requirements</h3> <ul > <li ><strong >Education:</strong> Bachelor's degree in any Engineering discipline.</li> <li ><strong >Experience:</strong> A minimum of 7 years of experience in upstream oil and gas, specifically in HSE officer, drilling safety, loss prevention, or an equivalent role. This experience must cover drilling &amp; workover operations, well planning, reservoir management, geology and geophysics, upstream facility project management, oil and gas field development, SIMOPS, and offshore/onshore rig safety inspections.</li> <li ><strong >Technical Knowledge:</strong> Demonstrated proficiency in well control procedures, rig safety inspections, managerial audits, safety programme development, and emergency response planning. Attendance at a Basic Well Control School is required.</li> </ul> <h3 >Key Competencies</h3> <ul > <li >Excellent verbal and written English communication skills.</li> <li >Ability to produce clear, concise reports and present findings effectively to management.</li> </ul> <h3 >Employment Information</h3> <p >This is a full-time position requiring a minimum of 7 years of relevant experience. The salary for this role ranges from SAR 10,000 to SAR 22,000 per month.</p>

<div dir="rtl"><h3 >نبذة عن الوظيفة</h3> <p >تبحث <strong >شركة سراكو شركة شخص واحد</strong> عن <strong >مهندس كهربائي</strong> للانضمام إلى فريقها في <strong >ظهران الجنوب، عسير</strong>. يتطلب هذا الدور، الذي يعمل بنظام <strong >الدوام الكامل</strong>، خبرة تتراوح بين 2 و 5 سنوات في مجال الهندسة الكهربائية، ويركز على إعداد التصاميم والمخططات الكهربائية ومتابعة تنفيذ المشاريع.</p> <h3 >المهام والمسؤوليات الأساسية</h3> <p >يتولى المهندس الكهربائي في هذا الدور مجموعة من المهام المحورية التي تضمن سير العمليات الكهربائية بكفاءة وفعالية. تشمل هذه المهام الجوانب التصميمية، التشغيلية، والصيانية، بالإضافة إلى إعداد التقارير الفنية المتخصصة.</p> <h3 >التصميم والتخطيط الهندسي</h3> <ul > <li >إعداد التصاميم والمخططات الكهربائية لمشاريع وأعمال الهندسة الكهربائية.</li> <li >متابعة تنفيذ التصاميم والمخططات لضمان مطابقتها للمواصفات.</li> <li >إعداد مخططات ومواصفات خطوط شبكات النقل والتوزيع الكهربائية وتحديد مساراتها.</li> </ul> <h3 >تشغيل وصيانة الأنظمة الكهربائية</h3> <ul > <li >إعداد برامج تشغيل الأنظمة والمعدات الكهربائية بما يتوافق مع متطلبات العمل.</li> <li >تشخيص أعطال الأجهزة والمعدات الكهربائية بدقة.</li> <li >متابعة إجراءات الإصلاح والصيانة والمعالجة للأعطال المكتشفة.</li> <li >إعداد برامج الصيانة الوقائية للأجهزة والمعدات والشبكات الكهربائية بناءً على توصيات الشركات المصنعة والتعليمات المعتمدة.</li> </ul> <h3 >إعداد التقارير والتوثيق</h3> <ul > <li >إعداد الوثائق والتقارير المتخصصة بنتائج الدراسات والتحاليل الكهربائية.</li> <li >عرض ومناقشة التقارير والوثائق مع الأطراف المعنية.</li> <li >إعداد التقارير المتخصصة بالأعمال والمشروعات الهندسية ونسب تقدمها.</li> <li >حفظ الوثائق والتقارير في قاعدة البيانات الخاصة بها وفقاً للسياسات والإجراءات المعتمدة.</li> <li >تطوير أساليب وإجراءات العمل ومواكبة التطورات التقنية في مجال الهندسة الكهربائية.</li> </ul> <h3 >المؤهلات والخبرات المطلوبة</h3> <ul > <li >خبرة عملية تتراوح بين <strong >2 و 5 سنوات</strong> في مجال الهندسة الكهربائية.</li> <li >القدرة على إعداد التصاميم والمخططات الكهربائية بدقة.</li> <li >مهارات في تشخيص الأعطال الكهربائية ومتابعة إجراءات الإصلاح.</li> <li >القدرة على إعداد التقارير الفنية والوثائق المتخصصة.</li> </ul></div>

<h3 >Port Engineer Shore Based Position at Front End Limited Company</h3> <p >Front End Limited Company is seeking a <strong >Port Engineer Shore Based Position</strong> to join its operations in Dhahran, Eastern, Saudi Arabia. This is a full-time, on-site role dedicated to ensuring the efficient and safe functioning of marine assets.</p> <h3 >Role Purpose and Context</h3> <p >The Port Engineer will be responsible for the comprehensive oversight of vessel operations, including the management of maintenance and repair activities. This position plays a crucial role in upholding operational standards and ensuring compliance with all relevant safety and maritime regulations for the company's marine assets.</p> <h3 >Key Responsibilities</h3> <ul > <li >Coordinate day-to-day vessel management activities.</li> <li >Conduct thorough inspections of marine assets.</li> <li >Manage compliance with all applicable safety and maritime regulations.</li> <li >Collaborate closely with various internal teams and third-party service providers to optimize performance and operational efficiency.</li> </ul> <h3 >Experience Requirements</h3> <p >Candidates for this Port Engineer position are required to have <strong >2 to 5 years of relevant experience</strong> in port engineering, marine operations, or a related field. This experience should demonstrate a proven ability to manage vessel operations and maintenance effectively.</p> <h3 >Work Environment and Location</h3> <p >This is an <strong >on-site, full-time role</strong> located in <strong >Dhahran, Eastern, Saudi Arabia</strong>. The position requires a direct presence to effectively oversee marine assets and operational activities.</p> <h3 >Application Information</h3> <p >The salary for this position is not disclosed and will be discussed during the interview process. Interested candidates are encouraged to apply, and further details regarding the application steps will be provided upon initial contact.</p>

<h3 >About the Role</h3> <p >Honeywell (KSA) is seeking an <strong >Advanced Project Engineer - Cybersecurity &amp; Networks</strong> to join their team in Dhahran. This full-time position is responsible for delivering network and cybersecurity engineering activities across industrial projects.</p> <h3 >Role Context and Scope</h3> <p >This role is central to ensuring reliable and secure system performance throughout the entire project lifecycle, from design and implementation to testing, commissioning, and customer handover. The Advanced Project Engineer will engage directly with customers on specific design details for non-standard solutions and provide technical coaching and mentoring to assistant engineers. The position supports project implementation aligned with P&amp;AS objectives, aiming for continuous improvement in margins, customer satisfaction, schedules, working capital, and safety performance. Site travel may be required for up to <strong >70%</strong> of the time.</p> <h3 >Key Responsibilities</h3> <ul > <li >Ensure required prerequisites (design inputs, tools, documentation, deliverables, schedule, budget) are in place before work begins.</li> <li >Produce parts of functional and detailed design specifications.</li> <li >Execute work assignments in accordance with applicable standards and quality systems, including implementation, testing, and documentation.</li> <li >Coach and support assigned assistant engineers to ensure they meet work requirements.</li> <li >Monitor and control the assigned work scope against the project plan.</li> <li >Communicate effectively with customers to fully define and agree on project requirements.</li> <li >Proactively recommend potential quality and efficiency improvements within the engineering group.</li> <li >Share technical knowledge with the project team, supervisor, own discipline, and other engineering disciplines.</li> <li >Report progress, technical problems, and changes to the project lead engineer or principal engineer.</li> </ul> <h3 >Performance Expectations</h3> <p >The successful candidate will be measured on their ability to maintain <strong >customer centricity</strong>, avoiding escalations related to the quality of system designs and applications. Additionally, performance will be assessed on <strong >productivity and project delivery</strong>, ensuring projects are delivered in accordance with project operations methodologies and utilizing available tools effectively.</p> <h3 >Qualifications and Experience</h3> <p >Candidates should possess <strong >5 to 10 years</strong> of experience in network and cybersecurity engineering, specifically within industrial projects. This includes practical experience with network architecture, device configuration, system integration, security hardening, risk assessment, and compliance with applicable cybersecurity standards.</p> <h3 >Location and Work Type</h3> <p >This is a full-time position based in Dhahran, KSA. The role offers an opportunity to contribute to critical industrial projects within a dynamic engineering environment.</p>

<div dir="rtl"><h3 >نبذة عن الوظيفة</h3> <p >تعلن شركة محمد عبدالرحمن البسام للاستشارات الهندسية عن حاجتها لتوظيف <strong >مهندس الصحة والسلامة والبيئة</strong> للانضمام إلى فريقها في مدينة الظهران بالمنطقة الشرقية. يمثل هذا الدور فرصة للمهندسين الطموحين للعمل بدوام كامل والمساهمة في تطوير وتطبيق معايير الصحة والسلامة والبيئة ضمن المشاريع الهندسية للشركة.</p> <h3 >ملخص الدور</h3> <p >يتولى مهندس الصحة والسلامة والبيئة مسؤولية دراسة وتطوير المعايير الخاصة بالصحة والسلامة والبيئة في المشاريع الهندسية. يشمل الدور أيضاً مراقبة عملية التنفيذ لهذه المعايير وتحليلها بشكل مستمر لضمان الامتثال الكامل لأفضل الممارسات واللوائح المعمول بها في هذا المجال.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >المساهمة في عملية التصميم الكلية للمشاريع، وتقديم المشورة بشأن المواد ومعايير الجودة البيئية.</li> <li >مباشرة أعمال صيانة المعدات وتصليحها بهدف تقليل العادم والمخلفات، والتأكد من سير العمليات وفقاً لمعايير الصحة والسلامة والبيئة.</li> <li >مراقبة العمليات وإجراء الجولات التفقدية لمواقع التشغيل والعمليات، لضمان اتباع معايير سلامة البيئة وتقديم النصح والمشورة في هذا الخصوص.</li> <li >تطوير أساليب وإجراءات العمل بشكل مستمر ومواكبة التطورات التقنية في مجال الصحة والسلامة والبيئة.</li> <li >إعداد الوثائق والتقارير المتخصصة المتعلقة بالأعمال والمشروعات الهندسية ونسب تقدمها، وعرضها وتوضيحها، وحفظها في قاعدة البيانات الخاصة بها وفقاً للسياسات والإجراءات المعتمدة.</li> </ul> <h3 >المؤهلات والخبرات</h3> <ul > <li >خبرة عملية تتراوح من <strong >0 إلى 1 سنة</strong> في مجال الصحة والسلامة والبيئة.</li> </ul> <h3 >تفاصيل الوظيفة</h3> <ul > <li >نوع العمل: <strong >دوام كامل</strong>.</li> <li >الموقع: <strong >الظهران، المنطقة الشرقية</strong>.</li> <li >الراتب الشهري: <strong >7000 - 8000 ريال سعودي</strong>.</li> </ul> <h3 >التقديم على الوظيفة</h3> <p >ندعو المهتمين الذين يستوفون المتطلبات المذكورة أعلاه للتقدم لهذه الفرصة المهنية في شركة محمد عبدالرحمن البسام للاستشارات الهندسية.</p></div>

<h3 >About the Role: Cloud Security Engineer GCP</h3> <p >Halian | Managed Services, Recruitment Agency &amp; Contract Staffing is seeking a <strong >Cloud Security Engineer GCP</strong> for a contract position in Dhahran, Eastern region. This role requires a strong background in traditional security, with subsequent specialization in Google Cloud Platform (GCP). The ideal candidate will have 5-10 years of experience, initially focusing on core security systems before transitioning to cloud security.</p> <h3 >Key Responsibilities</h3> <ul > <li >Deploy and fine-tune Security Command Center, Google SecOps (Chronicle), and GCP data protection tools.</li> <li >Secure Kubernetes/GKE workloads and container runtimes.</li> <li >Manage IAM, network controls (VPC, Cloud Armor), and encryption (KMS) using Terraform.</li> <li >Implement defense-in-depth strategies across network, workload, and data layers.</li> <li >Support the migration of legacy security controls into GCP environments.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >A pure security background with no cloud experience in early career, demonstrating strong foundations in cloud concepts and core security principles (CIA triad, zero trust, least privilege, defense in depth).</li> <li >Proven experience securing legacy, non-cloud-native systems, including firewalls, IDS/IPS, legacy operating systems, and security appliances.</li> <li >Hands-on experience with Security Command Center, Google SecOps, and GCP data protection tools.</li> <li >Strong knowledge of Kubernetes/GKE security.</li> <li >Proficiency in Terraform for managing security controls such as firewall rules, IAM, and encryption keys.</li> <li >Hands-on experience with KMS/encryption key configuration, including a clear understanding of CMEK versus CSEK.</li> </ul> <h3 >Preferred Certifications</h3> <ul > <li >Professional Cloud Security Engineer certification or any other GCP Professional certification is a plus.</li> </ul> <h3 >Work Type and Location</h3> <p >This is a <strong >contract position</strong> located in Dhahran, Eastern region. The role requires on-site presence to support critical security operations.</p> <h3 >Application Process</h3> <p >Candidates who meet the specified qualifications are encouraged to apply. Salary details will be discussed during the interview process.</p>

<h3 >About Saipem and the Opportunity</h3> <p >Saipem is a global leader in the engineering and construction of major projects across the energy and infrastructure sectors, both offshore and onshore. We are seeking a <strong >Jr. Rotating Equipment Engineer</strong> to join our team in Dhahran, Eastern region, on a contract basis. This role is integral to the Engineering department, specifically supporting the SITP for Offshore project.</p> <h3 >Role Context and Purpose</h3> <p >As a Jr. Rotating Equipment Engineer, you will contribute to the mechanical design of rotating equipment for critical Oil and Gas projects. This position offers an opportunity to develop expertise in design standards and equipment selection within a leading global engineering environment, working within the SITP for Offshore project.</p> <h3 >Key Responsibilities</h3> <ul > <li >Learn and apply design standards, gaining proficiency in API 610, API 617, ASME, and Saudi Aramco specific standards and specifications for rotating equipment.</li> <li >Prepare detailed rotating equipment datasheets, technical specifications, and requisition packages.</li> <li >Assist in equipment selection, supporting senior engineers in selecting pumps and compressors with related components based on process requirements.</li> <li >Review General Arrangement drawings, P&amp;IDs, and vendor technical documents for compliance with Saudi Aramco and International codes.</li> <li >Understand material and manufacturing requirements, learning about materials used for rotating equipment and their suitability for different operating conditions.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Master's Degree or Bachelor's degree in Mechanical Engineering.</li> <li >0-3 years of experience as a Jr. Rotating Equipment Engineer within the Mechanical Engineering Design field.</li> </ul> <h3 >Benefits and Work Environment</h3> <p >Saipem offers a comprehensive benefits package and supports a hybrid working model with Smart Working options and flexible hours to promote work-life balance. Employees benefit from opportunities for skills development, career growth, and innovation through complex challenges, fostering communication and collaboration. The company is committed to professional development and maintains an inclusive culture built on mutual respect, collaboration, and diversity. A strong focus is placed on the health and safety of people and the preservation of the natural ecosystem.</p> <h3 >Application Information</h3> <p >We invite qualified candidates to apply for this position and contribute to our projects in the energy and infrastructure sectors.</p>

<div dir="rtl"><h3 >نبذة عن الوظيفة</h3> <p >تبحث شركة روزن العربية السعودية عن <strong >مهندس ميكانيكي</strong> للانضمام إلى فريقها في الظهران، المنطقة الشرقية. يهدف هذا الدور بدوام كامل إلى إعداد التصاميم والمخططات لمشاريع الهندسة الميكانيكية، وتطوير برامج التجميع والتركيب والتشغيل للمعدات الصناعية، بالإضافة إلى وضع خطط الصيانة الوقائية وإعداد التقارير الفنية المتخصصة بنتائج الأعمال.</p> <h3 >المسؤوليات الرئيسية</h3> <ul > <li >إعداد التصاميم والمخططات لمشاريع أعمال الهندسة الميكانيكية، بما في ذلك المولدات والتوربينات ووحدات التكييف والمراجل وشبكات التوزيع لأنظمة التدفئة والتكييف والتبريد.</li> <li >تطوير خطط وبرامج تجميع وتركيب التجهيزات الميكانيكية للمشاريع الصناعية، وتحديد أنظمة الضبط والتحكم اللازمة.</li> </ul> <h3 >إدارة التشغيل والصيانة</h3> <ul > <li >إعداد برامج تشغيل المعدات وبرامج الصيانة الوقائية وفقاً لتعليمات الشركات المصنعة.</li> <li >متابعة إجراءات تنفيذ برامج التشغيل والصيانة لضمان الفعالية والكفاءة.</li> </ul> <h3 >تطوير العمل والتوثيق</h3> <ul > <li >تطوير أساليب وإجراءات العمل بشكل مستمر ومواكبة أحدث التطورات التقنية في مجال الهندسة الميكانيكية.</li> <li >إعداد الوثائق والتقارير المتخصصة المتعلقة بالأعمال والمشاريع الهندسية، وتوثيق نسب تقدمها، وعرضها، وحفظها في قاعدة البيانات الخاصة بها وفقاً للسياسات والإجراءات المعتمدة.</li> </ul> <h3 >المتطلبات الأساسية</h3> <p >يتطلب هذا الدور خبرة عملية تتراوح بين <strong >5 إلى 10 سنوات</strong> في مجال الهندسة الميكانيكية أو مجال ذي صلة.</p> <h3 >معلومات إضافية</h3> <p >هذه الوظيفة بدوام كامل ومقرها في <strong >الظهران، المنطقة الشرقية</strong>. ندعو المهندسين المؤهلين لتقديم طلباتهم للانضمام إلى فريق عمل شركة روزن العربية السعودية.</p></div>

<h3 >About ETAP Software</h3> <p >ETAP Software delivers innovative software solutions for electrical systems, empowering customers to make informed decisions across the entire lifecycle of their projects. The company supports digital transformation and sustainable energy transitions for a green and smart future, helping clients prioritize safety, maximize reliability, and maintain resilience through a unified electrical digital twin platform. ETAP is committed to creating a diverse work environment and operates as an Equal Opportunity Employer.</p> <h3 >The Role: Senior Project Engineer</h3> <p >ETAP Software is seeking a <strong >Senior Project Engineer</strong> to join its team in Dhahran. This full-time position involves comprehensive project engineering, serving as a technical lead, and overseeing site commissioning activities. The successful candidate will be responsible for performing site acceptance tests according to client specifications, preparing detailed site reports, and conducting communication point-to-point testing with various electrical equipment using standard communication protocols. Additionally, the role includes testing and demonstrating SCADA, PPC, and MGC applications.</p> <h3 >Key Responsibilities</h3> <ul > <li >Serve as a Power System Expert in electrical Protection and Control Systems.</li> <li >Monitor and distribute site teamwork progress in accordance with customer commissioning schedules.</li> <li >Develop, implement, test, and troubleshoot communication systems, leveraging experience in IP networking, UDP/TCP/IP, switching, routing, firewalls, gateways, and GPRS/EDGE/3G/4G modems.</li> <li >Coordinate and execute Site Acceptance Tests (SAT), provide validation support, conduct customer training, and ensure compliance with project requirements.</li> <li >Conduct and supervise field installation of new or retrofit equipment, and prepare instructional installation documents for clients and project teams.</li> <li >Implement and design SCADA Software based on customer specifications.</li> <li >Perform testing and troubleshooting of SCADA Software Applications.</li> <li >Prepare, coordinate, and execute Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT) for SCADA/PPC/MGC/SPM systems, ensuring client satisfaction and project compliance.</li> <li >Provide on-site customer training for commissioned systems.</li> <li >Conduct strategic planning and analysis for both short-term and long-term project commissioning.</li> <li >Act as a Site Engineer for meetings and coordination with all equipment suppliers and clients.</li> <li >Prepare schedules and reports, ensuring work alignment with the Site Engineer Team.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >Bachelor's degree in Instrument, Electronic &amp; Telecommunication, or Electrical Engineering, or an equivalent qualification.</li> <li >A minimum of <strong >8-10 years</strong> of working experience in Renewable Solar SCADA and Oil &amp; Gas sectors.</li> <li >Demonstrated knowledge and practical experience in site commissioning.</li> </ul> <h3 >Essential Technical Skills</h3> <ul > <li >Technical proficiency in multiple communication protocols, including Modbus, IEC 61850, DNP, and IEC 60870-50-104.</li> <li >Experience with SCADA and PPC commissioning specifically within the renewable energy field.</li> <li >Knowledge of Renewable SCADA Solar Performance Monitoring Systems.</li> <li >Familiarity with Weather Monitoring Systems and forecasting systems for both short-term and long-term applications.</li> </ul> <h3 >Work Environment</h3> <p >This full-time position is based in Dhahran, Saudi Arabia, and requires active participation in site-based activities. The role involves collaboration with internal teams, equipment suppliers, and clients to ensure successful project execution and compliance with all requirements.</p>

<h3 >Role Overview</h3> <p >Baker Hughes is seeking a <strong >Machinery Diagnostics Field Engineer</strong> to join our team in Dhahran, Eastern. This full-time role involves providing comprehensive service solutions for critical rotating machinery assets, including their protection and monitoring systems, to customers. The position requires a minimum of 5 years of experience in machinery diagnostics field services.</p> <h3 >Key Responsibilities</h3> <p >The Machinery Diagnostics Field Engineer provides technical leadership and assistance to customers, users, and other field personnel in the diagnostic and long-term maintenance of Bently Nevada equipment and customer rotating machinery. This includes performing installations, commissioning, and troubleshooting of hardware and software products, as well as evaluating machinery condition through rotor dynamic analysis and delivering diagnostics training after certification.</p> <h3 >Specific Duties</h3> <ul > <li >Provide leadership, technical direction, and assistance to customers, users, and other field personnel for the diagnostic and long-term maintenance of Bently Nevada equipment and customer rotating machinery.</li> <li >Perform installations, commissioning, and troubleshooting of Bently Nevada Hardware and Software Products and Solutions at customer locations.</li> <li >Diagnose machinery problems based on available data, including vibration, process, performance data, maintenance records, and customer communications.</li> <li >Complete timely standard service reports with documentation of findings and recommendations.</li> <li >Respond to customer-required travel promptly, ensuring all necessary service equipment is brought.</li> <li >Identify proper installation of permanently installed transducers and monitors, and install transducers as required.</li> <li >Properly install temporary shaft, casing, optical, and laser-based transducers to acquire additional machinery data.</li> <li >Professionally use MDS data acquisition instruments, including ADRE408, Scout, and System 1®, to acquire field data.</li> <li >Successfully extract machinery data plots from MDS data acquisition instruments and System 1®.</li> <li >Recognize and evaluate the overall quality of machinery vibration data, distinguishing between good and bad data.</li> <li >Recognize and quantify the severity of machinery vibration data in accordance with applicable industry standards (*, API, ISO).</li> <li >Perform field-balancing of critical machinery such as steam and gas turbines, generators, compressors, and pumps.</li> <li >Conduct simple two-channel impact tests using an impact hammer and an appropriate accelerometer to determine natural frequencies of structures, rotors, piping, and machinery support systems.</li> <li >Perform and interpret Operating Deflection Shapes (ODS) and basic modal analysis.</li> <li >Collect data for torsional analysis.</li> <li >Adhere to BH HSE standards at all work sites and conduct fieldwork in compliance with all applicable regulations and customer requirements.</li> </ul> <h3 >Required Qualifications</h3> <ul > <li >Graduate engineer from an accredited institution with a minimum 4-year technical degree. A BSc or MSc degree in Mechanical Engineering is preferred.</li> <li >Minimum of 5 years of experience in Machinery Diagnostics Services Field Services.</li> <li >Certificate as a Vibration Analyst level 3 or higher from an accredited Institute is preferred.</li> <li >Knowledge and experience with mechanical vibration, rotating machinery vibration and diagnostics, rotor dynamic analysis, machinery balancing, and alignment.</li> <li >Ability to interpret and understand machinery mechanical and electrical system drawings and specifications.</li> <li >Valid driving license and passport.</li> <li >Strong command of oral and written communication in English, including formal presentations.</li> </ul> <h3 >Desired Skills and Attributes</h3> <ul > <li >Previous background in Systems &amp; Instrumentation work, operating plant experience, OEM experience, or an industrial co-op program is highly desirable.</li> <li >Strong interpersonal and leadership skills, with the ability to influence others and lead small teams.</li> <li >Ability to lead initiatives of moderate scope and impact.</li> <li >Ability to coordinate several projects simultaneously.</li> <li >Effective problem identification and solution skills.</li> <li >Proven analytical and organizational ability.</li> </ul> <h3 >Work Environment and Travel</h3> <p >This role requires availability to travel up to <strong >70% of the time</strong>, as needed, within the geographic region, often with short notice. The successful candidate must be willing to work at customer plant sites for extended hours and be capable of working in arduous temperature environments, at heights, and performing all tasks while wearing required Personnel Protective Equipment (PPE). The position also demands the physical strength and agility necessary to meet job requirements.</p>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركة سراكو شركة شخص واحد عن <strong >مهندس إلكترونيات</strong> للانضمام إلى فريقها في ظهران الجنوب، بمنطقة عسير. يتولى شاغل هذا الدور مسؤولية الإشراف على تركيب وتشغيل الأجهزة الإلكترونية، بالإضافة إلى تشخيص أعطالها ومعالجتها ووضع برامج الصيانة الوقائية لها. يتطلب الدور خبرة عملية تتراوح بين <strong >2 إلى 5 سنوات</strong> في مجال الهندسة الإلكترونية، وهو متاح بنظام <strong >الدوام الكامل</strong>.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >إعداد خطط تركيب الأجهزة الإلكترونية ومتابعة إجراءات التركيب لضمان التنفيذ السليم.</li> <li >إجراء التشغيل التجريبي والضبط الدقيق للأجهزة بعد التركيب لضمان الأداء الأمثل.</li> <li >تدريب المستخدمين على كيفية تشغيل الأجهزة الإلكترونية بكفاءة وأمان.</li> <li >تشخيص الأعطال الفنية في الأجهزة الإلكترونية وتحديد أسبابها بدقة.</li> <li >متابعة إجراءات الإصلاح والصيانة اللازمة للأجهزة.</li> <li >إجراء الفحوصات والاختبارات اللازمة بعد الإصلاح للتأكد من دقة الأداء.</li> </ul> <h3 >الصيانة الوقائية وتطوير العمل</h3> <ul > <li >إعداد برامج الصيانة الوقائية للأجهزة الإلكترونية بحسب تعليمات الشركة المصنعة ومتابعة تنفيذها.</li> <li >تطوير أساليب وإجراءات العمل الهندسية لمواكبة التطورات التقنية في المجال.</li> <li >المساهمة في تحسين كفاءة وفعالية العمليات المتعلقة بالأجهزة الإلكترونية.</li> </ul> <h3 >التوثيق وإعداد التقارير</h3> <ul > <li >إعداد الوثائق والتقارير المتخصصة المتعلقة بالأعمال والمشروعات الهندسية.</li> <li >عرض وتوضيح نسب تقدم الأعمال والنتائج المحققة بشكل دوري.</li> <li >حفظ جميع الوثائق والتقارير في قاعدة البيانات المخصصة لها، بما يتوافق مع السياسات والإجراءات المعتمدة.</li> </ul> <h3 >المؤهلات والخبرات المطلوبة</h3> <ul > <li >خبرة عملية تتراوح بين <strong >2 إلى 5 سنوات</strong> في مجال الهندسة الإلكترونية أو مجال ذي صلة.</li> <li >معرفة قوية بمبادئ تركيب وتشغيل وصيانة الأجهزة الإلكترونية.</li> <li >القدرة على تشخيص الأعطال وتقديم حلول فعالة.</li> <li >مهارات ممتازة في إعداد التقارير الفنية والتوثيق.</li> </ul> <h3 >معلومات إضافية</h3> <p >هذا الدور متاح بنظام <strong >الدوام الكامل</strong> في مدينة ظهران الجنوب، بمنطقة عسير. الراتب غير معلن وسيتم تحديده بناءً على المؤهلات والخبرة.</p></div>

<h2 ><span lang="ar" dir="rtl">اعلان أرامكو الرقمية عن وظائف في مختلف المجالات</span></h2><h3 ><span lang="ar" dir="rtl">المسميات الوظيفية:</span></h3><ul><li><p ><span lang="ar" dir="rtl">مدير حسابات المبيعات (Sales Account Manager)</span></p></li><li><p ><span lang="ar" dir="rtl">خبير الذكاء الاصطناعي الصناعي (Industrial AI Expert)</span></p></li><li><p ><span lang="ar" dir="rtl">مطور برامج (Software Developer)</span></p></li><li><p ><span lang="ar" dir="rtl">خبير تنفيذ المشاريع (Enterprise Execution Expert)</span></p></li><li><p ><span lang="ar" dir="rtl">خبير أول حسابات المبيعات (Senior Sales Account Expert)</span></p></li><li><p ><span lang="ar" dir="rtl">مهندس الذكاء الاصطناعي الصناعي (Industrial AI Engineer)</span></p></li><li><p ><span lang="ar" dir="rtl">استشاري هندسة الذكاء الاصطناعي الصناعي (Industrial AI Architect Consultant)</span></p></li><li><p ><span lang="ar" dir="rtl">خبير أول العمليات المالية السحابية (Senior Cloud FinOps Expert)</span></p></li><li><p ><span lang="ar" dir="rtl">خبير عمليات الحوسبة السحابية والبنية التحتية (Cloud &amp; Infrastructure Operations Expert)</span></p></li></ul><h3 ><span lang="ar" dir="rtl">التخصصات المطلوبة:</span></h3><ul><li><p ><span lang="ar" dir="rtl">الإدارة</span></p></li><li><p ><span lang="ar" dir="rtl">إدارة الأعمال</span></p></li><li><p ><span lang="ar" dir="rtl">الاتصالات</span></p></li><li><p ><span lang="ar" dir="rtl">التسويق</span></p></li><li><p ><span lang="ar" dir="rtl">المالية</span></p></li><li><p ><span lang="ar" dir="rtl">المبيعات</span></p></li><li><p ><span lang="ar" dir="rtl">الذكاء الاصطناعي</span></p></li><li><p ><span lang="ar" dir="rtl">الحوسبة السحابية</span></p></li><li><p ><span lang="ar" dir="rtl">علوم الحاسب</span></p></li><li><p ><span lang="ar" dir="rtl">علم البيانات</span></p></li><li><p ><span lang="ar" dir="rtl">نظم المعلومات</span></p></li><li><p ><span lang="ar" dir="rtl">تقنية المعلومات</span></p></li><li><p ><span lang="ar" dir="rtl">هندسة الحاسب</span></p></li><li><p ><span lang="ar" dir="rtl">الهندسة الكهربائية</span></p></li><li><p ><span lang="ar" dir="rtl">الهندسة الصناعية</span></p></li><li><p ><span lang="ar" dir="rtl">الهندسة</span></p></li><li><p ><span lang="ar" dir="rtl">أو ما يعادلها.</span></p></li></ul><h3 ><span lang="ar" dir="rtl">لمحة عن الشركة:</span></h3><p ><span lang="ar" dir="rtl"><strong>أرامكو الرقمية (Aramco Digital)</strong> هي شركة تقنية تابعة لشركة <strong>أرامكو السعودية</strong>، تأسست عام <strong>2023م</strong> بهدف تسريع التحول الرقمي والابتكار التقني في مختلف القطاعات. وتسعى الشركة إلى بناء منظومة رقمية وطنية متقدمة، وتعزيز حلول الذكاء الاصطناعي والتقنيات الحديثة، بما يدعم التحول الرقمي ويواكب مستهدفات رؤية المملكة 2030.</span></p>

<h3 >About the Role</h3> <p >DP WORLD is seeking a <strong >Port Captain</strong> to join their team in KSA. This full-time position requires 2-5 years of experience and involves overseeing vessel operations, crew management, and adherence to safety and operational standards. The role is based in the Eastern Region, covering cities such as Dammam, Al Khobar, Dhahran, Al Jubail, Al-Ahsa, Al Qatif, Ras Tannurah, Buqayq, and Al Khafji.</p> <h3 >Key Responsibilities</h3> <ul > <li >Manage vessel budgets for food provisions and housekeeping purchases.</li> <li >Maintain positive communication between vessel and office staff, promoting the safety and well-being of seafaring personnel.</li> <li >Conduct technical interviews for deck officer candidates and select suitable crew.</li> <li >Brief Masters, Officers, and crew on their roles, responsibilities, and company expectations before assignments.</li> <li >Liaise with the Personnel Department regarding travel, crew changes, and other personnel issues, monitoring crew 'overlap days'.</li> <li >Review vessel requisitions to ensure efficient and economical inventory and timely delivery of supplies.</li> <li >Monitor the performance of the bridge team and complete regular performance appraisals for Captains.</li> <li >Highlight high-potential candidates or underperforming crew to the Fleet Superintendent.</li> <li >Ensure all ship staff receive appropriate hand-over and familiarization upon joining.</li> <li >Oversee the general wellness and welfare of the crew.</li> <li >Conduct monthly on-board inspections of the ship's hull, cargo spaces, deck machinery, and safety equipment.</li> <li >Be present on board for offshore operations when special requirements arise.</li> <li >Liaise with the Operations Department and Vessel Master regarding certification, safety equipment, and loose lifting gear.</li> <li >Prepare vessel repair specifications in collaboration with the Engineering Superintendent/Port Engineer.</li> <li >Ensure adherence to IMCA guidelines and best industry practices for vessel DP operations, equipment, and personnel.</li> <li >Ensure the fleet's DP and navigational equipment is fully operational at all times.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >2-5 years of relevant experience in port or vessel operations.</li> <li >Demonstrated ability to manage vessel budgets and inventory effectively.</li> <li >Strong understanding of maritime safety regulations and crew welfare.</li> <li >Experience in conducting technical interviews and crew selection.</li> <li >Familiarity with IMCA guidelines and DP operations.</li> </ul> <h3 >Work Environment</h3> <p >This is a <strong >full-time</strong> position based in the Eastern Region of KSA, requiring regular on-board presence and travel across various cities including Dammam, Al Khobar, and Al Jubail. The role involves close collaboration with vessel crews, office staff, and various departments to ensure smooth and safe operations.</p> <h3 >Application Process</h3> <p >Interested candidates are encouraged to apply. Salary details will be discussed during the interview process.</p>

<h3><strong>About Eram Talent and the Role</strong></h3><p>Eram Talent is seeking a <strong>Building Inspector</strong> to join our professional team. This full-time position is designed for individuals with 0-1 years of experience who are looking to contribute to ensuring building safety and compliance.</p><h3><strong>Role Purpose</strong></h3><p>The Building Inspector plays a crucial role in upholding construction quality and regulatory adherence. This position involves conducting detailed assessments to verify that building projects meet all applicable standards and requirements, thereby contributing to public safety and structural integrity.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Conducting comprehensive building inspections to evaluate construction progress, materials, and workmanship.</li><li>Ensuring strict compliance with all applicable building codes, safety regulations, and industry standards.</li><li>Effectively communicating inspection findings, including any identified deficiencies or non-compliance issues, to relevant stakeholders such as project managers, contractors, and property owners.</li></ul><h3><strong>Required Experience and Qualifications</strong></h3><p>Candidates for this position should possess <strong>0-1 years of relevant professional experience</strong> in building inspection or a related field. We are looking for qualified individuals who are eager to apply their knowledge and develop their expertise in a structured environment.</p><h3><strong>Essential Skills and Attributes</strong></h3><ul><li>Strong attention to detail to accurately identify and document compliance and non-compliance issues during inspections.</li><li>Excellent verbal and written communication skills for clear and concise reporting of inspection findings.</li><li>Ability to interpret and apply complex building codes, standards, and regulatory guidelines.</li></ul><h3><strong>Work Type</strong></h3><p>This is a <strong>full-time</strong> employment opportunity with Eram Talent. The successful candidate will work within a professional framework dedicated to maintaining high standards in building inspection.</p>

<h3 >About the Marine Assurance Lead Role</h3> <p >Algihaz Marine Contractors is seeking a dedicated and experienced <strong >Marine Assurance Lead</strong> to join our team in Dhahran, Saudi Arabia. This full-time position is critical for overseeing and coordinating all marine assurance activities within the Kingdom, ensuring the consistent delivery of high-quality services across all projects and operations.</p> <h3 >Role Purpose and Key Interfaces</h3> <p >The Marine Assurance Lead acts as the primary interface for marine assurance, representing the company with the Saudi Aramco Rig Move Office and other key client stakeholders. A core aspect of this role involves building and maintaining strong relationships with project, operations, and marine teams to facilitate seamless assurance processes and compliance.</p> <h3 >Core Responsibilities</h3> <ul > <li >Lead and coordinate all marine assurance activities across the Kingdom of Saudi Arabia.</li> <li >Serve as the primary focal point for marine assurance with the Saudi Aramco Rig Move Office and other key client stakeholders.</li> <li >Cultivate and maintain strong working relationships with client, project, operations, and vessel management teams.</li> <li >Ensure vessel inspections, audits, and assurance activities are planned, conducted, and reported in accordance with company and client requirements.</li> <li >Maintain the quality, consistency, and technical standard of all inspections completed by the Marine Assurance team.</li> <li >Undertake ad hoc vessel inspections, audits, and assurance activities to support operational requirements.</li> <li >Ensure compliance with Saudi Aramco requirements, international maritime regulations, and company assurance standards.</li> <li >Review inspection findings, monitor corrective actions, and ensure timely close-out of identified issues.</li> <li >Support vessel acceptance, mobilization, and contractor assurance activities across all projects.</li> <li >Provide technical marine assurance advice and support to project and operational teams.</li> <li >Prepare and present assurance reports, trends, and performance updates to senior management and clients.</li> </ul> <h3 >Team Leadership and Development</h3> <p >This role provides leadership and oversight to the Marine Assurance team, fostering high performance and professional development. The Lead will be responsible for mentoring team members, monitoring team performance and KPIs, and driving continuous improvement initiatives within the assurance framework.</p> <h3 >Required Experience and Attributes</h3> <p >Candidates for this position should possess <strong >5-10 years of relevant experience</strong> in marine assurance or a closely related field. The ideal candidate will demonstrate strong leadership capabilities, a meticulous approach to compliance, and the ability to build effective relationships with diverse stakeholders, ensuring the highest standards of operational integrity.</p> <h3 >Commitment to Operational Excellence</h3> <p >The Marine Assurance Lead is expected to promote a robust safety culture and ensure all assurance activities are conducted with the highest professional and ethical standards. This involves a continuous commitment to maintaining operational excellence, stringent compliance, and ongoing improvement across all marine operations.</p>

<h3 >About the Field Specialist Coiled Tubing Role</h3> <p >Baker Hughes is seeking a <strong >Field Specialist Coiled Tubing</strong> to join our Pressure Pumping Team in Dhahran, Eastern region. This full-time position involves executing coiled tubing operations with a focus on quality and efficiency. The role requires a minimum of 5 years of experience in coiled tubing operations and contributes to the development of advanced energy technology products.</p> <h3 >Role Context and Operational Focus</h3> <p >This role is integral to bringing together physical and digital technologies to create oilfield equipment. The team develops systems that control and monitor oil and gas extraction, maintaining industry-leading surface pressure capabilities. As a Field Specialist, you will perform operations on machined parts to high-quality standards, working proactively to meet production schedules and developing your skills on innovative products.</p> <h3 >Key Responsibilities</h3> <ul > <li >Operate and monitor coiled tubing units, injector heads, reels, and control systems.</li> <li >Lead rig-up, pressure testing, job execution, and rig-down activities.</li> <li >Monitor real-time job parameters such as tubing depth, weight, pump rates, and well pressure.</li> <li >Perform pre-job inspections, function testing, and basic equipment troubleshooting.</li> <li >Conduct risk assessments and ensure compliance with Baker Hughes and customer HSE requirements.</li> <li >Record operational data and prepare accurate job reports for customers.</li> <li >Coordinate with the customer, rig crew, and other service providers to ensure smooth operations.</li> <li >Mentor operators and junior personnel while maintaining high operational standards.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Minimum of a high school diploma; a Bachelor's degree in Engineering is preferred.</li> <li >Minimum of <strong >5 years of experience</strong> as a field specialist or field engineer in coiled tubing operations.</li> <li >Minimum of <strong >7 years of experience</strong> in oilfield services and nitrogen pumping.</li> <li >Strong knowledge of Coiled Tubing equipment, Pressure Control Equipment (BOPs, stripper, lubricator), Nitrogen Pumping, and Well Intervention operations.</li> <li >Strong knowledge of HSE procedures and risk management.</li> </ul> <h3 >Work Schedule</h3> <p >This position operates on a shift-based rotational pattern. The standard schedule is <strong >6 weeks on, followed by 4 weeks off</strong>. Baker Hughes supports flexible working patterns to enable employees to perform effectively.</p> <h3 >Benefits</h3> <p >Baker Hughes provides a comprehensive benefits package for employees, which includes:</p> <ul > <li >Contemporary work-life balance policies and wellbeing activities.</li> <li >Comprehensive private medical care options.</li> <li >Life insurance and disability programs.</li> <li >Tailored financial programs.</li> <li >Additional elected or voluntary benefits.</li> </ul>

<h3 >About the Role</h3> <p >Honeywell (KSA) is seeking an <strong >Inside Sales Rep II</strong> to join its team in Dhahran. This full-time position is critical for driving customer engagement, satisfaction, and profitable aftermarket growth across CCC's installed base within an assigned territory. The role serves as a key commercial interface, ensuring clients receive exceptional aftermarket support while maximizing the value, reliability, and lifecycle performance of their turbomachinery control systems.</p> <h3 >Key Responsibilities</h3> <p >The Inside Sales Rep II is responsible for developing and executing growth strategies for CCC's aftermarket portfolio. This includes service agreements, long-term service contracts, spare parts, lifecycle services, modernization projects, cybersecurity solutions, and other value-added services. Through a deep understanding of customer operations, maintenance challenges, and business objectives, the role proactively identifies opportunities to expand CCC's presence, increase customer retention, and drive sustainable revenue growth. Collaboration with Account Managers, Engineering, Service, and other cross-functional teams is essential to develop customer-specific growth plans, build a robust sales pipeline, and deliver value-based solutions that address customer needs while supporting strategic business objectives. The role requires a consultative sales approach, strong commercial acumen, and the ability to effectively engage stakeholders at all levels.</p> <h3 >Specific Accountabilities</h3> <ul > <li >Manage and grow CCC aftermarket strategic accounts within the turbomachinery controls business.</li> <li >Participate in developing and executing CCC accounts’ plans to drive revenue growth and achieve sales targets for the aftermarket business.</li> <li >Build and maintain strong relationships with key stakeholders, understanding their business needs and providing tailored solutions.</li> <li >Identify new business opportunities within existing accounts and collaborate with cross-functional teams to deliver value-added solutions.</li> <li >Guide aftermarket contract negotiations and ensure customer satisfaction through effective account management.</li> <li >Lead solution development efforts that best address customer needs, coordinating the involvement of all necessary company personnel.</li> <li >Meet assigned targets for profitable sales volume and strategic objectives in assigned accounts by winning orders, eliminating threats, and supporting the Greenfield team in project stages.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >Minimum of 5 years of experience in a turbomachinery controls or industrial automation business, in a capacity such as a project engineer, application engineer, or field service engineer.</li> <li >2-3 years of experience in technical sales, account management, or business development.</li> <li >Domain experience within the oil and gas, mining, power, or Petro-chemicals industries.</li> </ul> <h3 >Essential Skills and Attributes</h3> <ul > <li >Exceptional presentation and communication skills, with the ability to conduct high-level sales demonstrations and technical sales presentations.</li> <li >High emotional intelligence (EQ) and the ability to assess situations and adjust communication style accordingly.</li> <li >Strong business acumen, including understanding customer needs, how customers generate revenue, and how to align these with available solutions.</li> <li >Commercial acumen, encompassing knowledge of competitive positioning, pricing strategies, deal structuring, and risk reduction.</li> <li >Knowledge of high-dollar, solution value sales processes.</li> <li >Experience with planning, budgeting, forecasting, and other management tools for analyzing, planning, and directing business programs.</li> <li >Proven record of success in maintaining strong relationships with customers.</li> <li >Demonstrated ability to efficiently use Microsoft Office products and CRM systems.</li> </ul> <h3 >Travel Requirements</h3> <p >Frequent travel is expected within Saudi Arabia and internationally as required to fulfill the responsibilities of this role.</p>

<h3 >About the Workshop Supervisor Role</h3> <p >This role is for a <strong >Workshop Supervisor</strong> at <strong >Sinopec Tech Middle East</strong>, based in <strong >Dhahran</strong>, within the <strong >Eastern</strong> region. It is a <strong >full-time</strong> position focused on overseeing all workshop activities. The primary objective is to ensure the safe, efficient, and high-quality assembly, maintenance, and production operations of drilling and completion tools.</p> <h3 >Role Purpose and Scope</h3> <p >The Workshop Supervisor is central to managing the operational aspects of the workshop. This involves comprehensive oversight of personnel, production schedules, equipment utilization, and material management. The role ensures that all activities align with company objectives and operational standards, contributing directly to the reliability and readiness of critical tools for field use. A key aspect of this position is driving continuous process improvement, supporting localization projects, and maintaining strict compliance with HSE (Health, Safety, and Environment) and quality requirements across all workshop operations.</p> <h3 >Key Responsibilities</h3> <ul > <li >Develop, implement, and monitor workshop production plans to ensure timely and efficient task execution.</li> <li >Supervise and coordinate workshop personnel, assign daily work, and ensure adherence to operational procedures and safety rules.</li> <li >Oversee on-site workshop management, ensuring cleanliness, orderliness, and compliance with HSE and quality standards.</li> <li >Manage all workshop equipment and tools, including maintenance, calibration, and repair schedules to ensure reliability and readiness.</li> <li >Supervise material handling, inventory control, and documentation to support uninterrupted production and field operations.</li> <li >Monitor workflow, identify bottlenecks, and implement process optimization for improved productivity and efficiency.</li> <li >Ensure all assembled and maintained drilling and completion tools meet inspection and testing standards before release for field use.</li> <li >Train and evaluate workshop staff to enhance technical competence and teamwork.</li> <li >Prepare regular reports on production progress, equipment status, and material usage.</li> <li >Perform other duties as assigned by the team leader or management.</li> </ul> <h3 >Required Qualifications and Experience</h3> <p >Candidates for this role should possess:</p> <ul > <li ><strong >5 to 10 years</strong> of relevant experience in workshop supervision or a similar operational management role, preferably within the drilling and completion tools sector.</li> </ul> <h3 >Work Setting</h3> <p >This is a <strong >full-time</strong> position located in <strong >Dhahran</strong>, Eastern region, with <strong >Sinopec Tech Middle East</strong>. The role requires a hands-on approach to managing daily workshop activities in a dynamic industrial environment.</p> <h3 >Application Information</h3> <p >We invite qualified candidates to apply for this opportunity.</p>