Inspection Engineer Jobs in Saudi

<h3 >About Flowserve and the Pump E&amp;I QC Engineer Role</h3> <p >Flowserve is seeking a dedicated <strong >Pump E&amp;I QC Engineer</strong> to join its team in <strong >Al Khobar, Eastern region</strong>. This <strong >full-time</strong> role is critical for performing documented inspections to verify the conformance of parts to applicable drawings, procedures, specifications, and all statutory and regulatory requirements.</p> <h3 >Role Purpose and Scope</h3> <p >The E&amp;I QC Engineer is responsible for the content of the Inspection Test Plan (ITP) and the project quality plan, ensuring alignment with customer and Flowserve specifications, as well as international standards. This position also involves defining, advising on, and controlling all project-required QC documents. The E&amp;I QC Engineer reports directly to the Quality Supervisor.</p> <h3 >Key Responsibilities</h3> <ul > <li >Prepare and define test and inspection requirements for projects, including ITPs and procurement specifications.</li> <li >Attend inspection and expediting activities as per notification.</li> <li >Preside over Pre-Inspection Meetings (PIM).</li> <li >Implement quality activities on manufactured equipment and materials according to approved ITPs and procedures.</li> <li >Review and endorse vendor and manufacturer test reports and records (IRB, MDRB).</li> <li >Prepare Inspection Reports and Expediting Reports.</li> <li >Conduct shop and desk expediting.</li> <li >Review and verify punch lists and non-conformances.</li> <li >Issue Inspection Release Certificates when necessary.</li> <li >Prepare Inspection Disposition Reports (IDR).</li> <li >Coordinate with project coordinators, clients, vendors, and quality personnel for proper execution of assignments.</li> <li >Perform sourcing inspection for electrical equipment such as Motors and LOS, and participate in Factory Acceptance Tests (FAT).</li> <li >Perform any other assigned duties.</li> </ul> <h3 >Required Experience and Qualifications</h3> <p >Candidates for this role should possess <strong >5-10 years of direct experience</strong>. This experience must be within the Pump's OEM and/or skid-mounted equipment manufacturing industry, demonstrating a strong understanding of relevant quality control processes and standards.</p> <h3 >Work Location and Type</h3> <p >This is a <strong >full-time</strong> position based in <strong >Al Khobar</strong>, located in the <strong >Eastern region</strong>.</p> <h3 >Application Information</h3> <p >Interested candidates are invited to apply for this role.</p>

Egis is an international player active in architecture, consulting, construction engineering and mobility services. We create and operate intelligent infrastructures and buildings that respond to the climate emergency and contribute to more balanced, sustainable and resilient territorial development. Operating in 100 countries, Egis puts the expertise of its 19,500 employees at the service of its clients and develops cutting-edge innovations accessible to all projects. Through its wide range of activities, Egis is a key player in the collective organization of society and the living environment of citizens all over the world.<br><br>With 3,500 employees across 8 countries in the Middle East, Egis has delivered over 700 complex development projects, stimulating economic growth and enhancing quality of life. Ranked among the top ten firms in the Middle East by Engineering News Record (ENR), Egis is committed to sustainable development. The Group’s operations in the Middle East are built on strategic acquisitions and a deep understanding of local market conditions. Egis’ long history of providing comprehensive engineering, consulting, and project management services makes it a trusted partner for regional governments, investors, and developers.<br><br><br><br>Job Description<br><br>The Site Supervision Engineer is responsible for executing day-to-day site inspections and technical monitoring of construction activities, ensuring that civil, structural, architectural, and related building works are performed in accordance with approved design drawings, project specifications, quality standards, and schedule targets.<br><br>This role acts as a primary technical presence in the field, monitoring contractor execution, supporting cross-disciplinary coordination with MEP services, and actively supporting the project's quality (QA/QC) and safety (HSE) procedures on-site.<br><br>Key Responsibilities<br><br>• Conduct daily routine site inspections for ongoing civil, structural, architectural, and site infrastructure works.<br><br>• Verify that all materials, execution techniques, and workmanship on-site strictly comply with approved drawings, project specifications, method statements, and local codes.<br><br>• Inspect structural elements, concrete pours, steel frame assemblies, masonry, floor slabs, and buildings envelopes details during execution.<br><br>• Assist in reviewing and coordinating with the technical team for contractor technical submittals, including Requests for Information (RFIs), shop drawings, Material Approval Requests (MARs), and work method statements.<br><br>• Log, monitor, and assist in resolving site quality issues; perform re-inspections for closed-out Non-Conformance Reports (NCRs) and punch list items under the direction of the Senior Engineer.<br><br>• Coordinate on-site with MEP inspectors to ensure smooth integration of systems with civil and structural works.<br><br>• Monitor daily contractor workforce deployment, equipment usage, work productivity, and activity sequence against short-term target schedules.<br><br>• Identify field execution delays early and report them to the Senior Site Supervision Engineer for resolution.<br><br>• Coordinate regularly with the on-site HSE Team to maintain a safe working environment.<br><br>• Support HSE enforcement during daily site walks.<br><br>• Prepare accurate daily site logs, inspection reports, and photographic records documenting site progress, manpower counts, weather conditions, and site challenges.<br><br>• Support the Senior Engineer in gathering data for weekly/monthly progress reports and quantifying work progress for monthly contractor payment validations.<br><br><br><br>Qualifications<br><br>• Bachelor’s Degree in Civil Engineering, Structural Engineering, Architectural Engineering or a relevant engineering discipline.<br><br>• Minimum 10 years of relevant construction and site supervision experience, preferably on major and complex projects.<br><br>• Prior site supervision experience on aviation-related projects or specialized industrial/large-span structural projects is strongly preferred.<br><br>• Sound working understanding of MEP systems to ensure effective interdisciplinary coordination on site.<br><br>• Membership in the Saudi Council of Engineers (SCE) or professional licensing is required.<br><br>• Familiarity with international and local building codes, site quality control processes, and standard construction methodology.<br><br>• Awareness of aviation facility technical requirements and local regulatory/authority compliance.<br><br>• Proficiency in Revit, CAD software (Auto CAD), document control systems (Aconex), and MS Office.<br><br>• Excellent written and verbal communication skills in English; Arabic language skills are a plus.<br><br>• Excellent communication, coordination, reporting, and problem-solving skills.<br><br>• Ability to manage multiple contractors, interfaces, and priorities within a demanding project environment.<br><br>• Excellent analytical and problem-solving skills with a detail-oriented approach<br><br>• Understanding of sustainable construction practices and their application within project delivery.<br><br>• Project Management Professional (PMP) certification is a plus.<br><br>• Ability to work efficiently in a fast-paced, dynamic environment.

Egis is an international player active in architecture, consulting, construction engineering and mobility services. We create and operate intelligent infrastructures and buildings that respond to the climate emergency and contribute to more balanced, sustainable and resilient territorial development. Operating in 100 countries, Egis puts the expertise of its 19,500 employees at the service of its clients and develops cutting-edge innovations accessible to all projects. Through its wide range of activities, Egis is a key player in the collective organization of society and the living environment of citizens all over the world.<br><br>With 3,500 employees across 8 countries in the Middle East, Egis has delivered over 700 complex development projects, stimulating economic growth and enhancing quality of life. Ranked among the top ten firms in the Middle East by Engineering News Record (ENR), Egis is committed to sustainable development. The Group’s operations in the Middle East are built on strategic acquisitions and a deep understanding of local market conditions. Egis’ long history of providing comprehensive engineering, consulting, and project management services makes it a trusted partner for regional governments, investors, and developers.<br><br><br><br>Job Description<br><br>The Site Supervision Engineer is responsible for executing day-to-day site inspections and technical monitoring of construction activities, ensuring that civil, structural, architectural, and related building works are performed in accordance with approved design drawings, project specifications, quality standards, and schedule targets.<br><br>This role acts as a primary technical presence in the field, monitoring contractor execution, supporting cross-disciplinary coordination with MEP services, and actively supporting the project's quality (QA/QC) and safety (HSE) procedures on-site.<br><br>Key Responsibilities<br><br>• Conduct daily routine site inspections for ongoing civil, structural, architectural, and site infrastructure works.<br><br>• Verify that all materials, execution techniques, and workmanship on-site strictly comply with approved drawings, project specifications, method statements, and local codes.<br><br>• Inspect structural elements, concrete pours, steel frame assemblies, masonry, floor slabs, and buildings envelopes details during execution.<br><br>• Assist in reviewing and coordinating with the technical team for contractor technical submittals, including Requests for Information (RFIs), shop drawings, Material Approval Requests (MARs), and work method statements.<br><br>• Log, monitor, and assist in resolving site quality issues; perform re-inspections for closed-out Non-Conformance Reports (NCRs) and punch list items under the direction of the Senior Engineer.<br><br>• Coordinate on-site with MEP inspectors to ensure smooth integration of systems with civil and structural works.<br><br>• Monitor daily contractor workforce deployment, equipment usage, work productivity, and activity sequence against short-term target schedules.<br><br>• Identify field execution delays early and report them to the Senior Site Supervision Engineer for resolution.<br><br>• Coordinate regularly with the on-site HSE Team to maintain a safe working environment.<br><br>• Support HSE enforcement during daily site walks.<br><br>• Prepare accurate daily site logs, inspection reports, and photographic records documenting site progress, manpower counts, weather conditions, and site challenges.<br><br>• Support the Senior Engineer in gathering data for weekly/monthly progress reports and quantifying work progress for monthly contractor payment validations.<br><br><br><br>Qualifications<br><br>• Bachelor’s Degree in Civil Engineering, Structural Engineering, Architectural Engineering or a relevant engineering discipline.<br><br>• Minimum 10 years of relevant construction and site supervision experience, preferably on major and complex projects.<br><br>• Prior site supervision experience on aviation-related projects or specialized industrial/large-span structural projects is strongly preferred.<br><br>• Sound working understanding of MEP systems to ensure effective interdisciplinary coordination on site.<br><br>• Membership in the Saudi Council of Engineers (SCE) or professional licensing is required.<br><br>• Familiarity with international and local building codes, site quality control processes, and standard construction methodology.<br><br>• Awareness of aviation facility technical requirements and local regulatory/authority compliance.<br><br>• Proficiency in Revit, CAD software (Auto CAD), document control systems (Aconex), and MS Office.<br><br>• Excellent written and verbal communication skills in English; Arabic language skills are a plus.<br><br>• Excellent communication, coordination, reporting, and problem-solving skills.<br><br>• Ability to manage multiple contractors, interfaces, and priorities within a demanding project environment.<br><br>• Excellent analytical and problem-solving skills with a detail-oriented approach<br><br>• Understanding of sustainable construction practices and their application within project delivery.<br><br>• Project Management Professional (PMP) certification is a plus.<br><br>• Ability to work efficiently in a fast-paced, dynamic environment.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Support the implementation of Operations Excellence and Compliance by independently assessing the effectiveness of reliability engineering, maintenance, inspection, and asset integrity programs across KJO. Monitor reliability performance, verify compliance with corporate standards and industry best practices, conduct technical audits and field assessments, evaluate equipment reliability and integrity risks, verify implementation of corrective actions, and promote continual improvement to enhance asset reliability, operational availability, process safety, and business performance.</p><p><b><u>MAIN RESPONSIBILITIES</u></b></p><p><b>Policies, Processes and Procedures</b></p><ul><li>Ensure compliance with KJO policies, Operations Excellence (OE) requirements, Asset Integrity standards, Reliability Engineering practices, and applicable industry standards and regulatory requirements.</li><li>Participate in the development, review, and continual improvement of Operations Excellence procedures, reliability standards, and asset integrity governance documents.</li><li>Monitor implementation of Operations Excellence initiatives related to Asset Integrity, Reliability Engineering, Inspection, Maintenance, and Integrity Management across KJO.</li></ul><p><b>Operations Excellence &amp; Compliance</b></p><ul><li>Conduct compliance assessments, audits, technical reviews, and field verification activities to evaluate adherence to approved standards, engineering practices, and corporate requirements.</li><li>Verify implementation and effectiveness of corrective and preventive actions resulting from audits, assessments, incidents, failures, and Operations Excellence observations.</li><li>Monitor closure of Operations Excellence observations and validate supporting evidence prior to recommending closure.</li></ul><p><b>Reliability &amp; Integrity</b></p><ul><li>Review Reliability-Centered Maintenance (RCM), Risk-Based Inspection (RBI), Fitness-for-Service (FFS), Asset Integrity Management (AIM), and maintenance strategies to verify compliance with corporate standards and industry best practices.</li><li>Assess implementation of preventive, predictive, and condition-based maintenance programs and verify their effectiveness in improving equipment reliability.</li><li>Evaluate equipment reliability, availability, maintainability, integrity performance, and lifecycle management through technical assessments and performance reviews.</li><li>Verify implementation of mechanical integrity programs, inspection strategies, corrosion management, and integrity assurance activities.</li></ul><p><b>Performance Monitoring &amp; Analysis</b></p><ul><li>Monitor and analyze reliability and asset integrity KPIs including equipment availability, Mean Time Between Failures (MTBF), Mean Time to Repair (MTTR), equipment criticality, inspection compliance, and maintenance effectiveness.</li><li>Analyze reliability trends, recurring failures, integrity risks, and performance gaps to identify continual improvement opportunities.</li><li>Benchmark reliability and asset integrity performance against corporate objectives and recognized industry best practices.</li><li>Prepare dashboards, technical reports, and management presentations supporting informed decision-making.</li></ul><p><b>Failure Analysis &amp; Risk Management</b></p><ul><li>Review Root Cause Analysis (RCA) investigations, failure reports, equipment integrity assessments, and lessons learned to verify quality and effectiveness of corrective actions.</li><li>Evaluate reliability risks and verify implementation of appropriate mitigation measures.</li><li>Promote continuous improvement initiatives to enhance equipment reliability, asset integrity, operational availability, process safety, and maintenance effectiveness.</li><li>Support implementation of reliability improvement initiatives based on data analysis, audits, and performance assessments.</li></ul><p><b>Governance, Audits &amp; Reporting</b></p><ul><li>Support corporate Operations Excellence assessments, internal audits, external audits, and management reviews related to reliability, inspection, maintenance, and asset integrity.</li><li>Review reliability databases, SAP records, FRACAS information, inspection records, and technical documentation to verify completeness, accuracy, and compliance.</li><li>Prepare executive reports highlighting compliance status, reliability performance, operational risks, outstanding actions, audit findings, and improvement recommendations.</li></ul><p><b>Coordination &amp; Technical Support</b></p><ul><li>Coordinate with Maintenance, Operations, Inspection, Projects, Engineering, Process Safety, and other departments regarding Operations Excellence initiatives and compliance activities.</li><li>Provide technical guidance on reliability engineering methodologies, asset integrity management, reliability KPIs, and Operations Excellence requirements.</li><li>Facilitate workshops, awareness sessions, and technical meetings related to reliability improvement and compliance initiatives.</li></ul><p><b>Safety, Health &amp; Environment</b></p><ul><li>Complies with all relevant safety, health and environmental procedures to ensure a healthy and safe work environment.</li></ul><p><b>Additional Responsibilities</b></p><ul><li>The post holder may be required to undertake additional duties, which may be reasonably expected and forms part of the function of the post.</li></ul><p><b><u>COMMUNICATIONS &amp; WORKING RELATIONSHIPS</u></b></p><p>Internal: Design Drafting Section and Engineers in OND, OFD, MSSD, PMD, ECD, ISD, etc. as required.</p><p>External: GES Contractors and Vendors.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Academic &amp; Professional Qualifications</b></p><ul><li>Bachelor's Degree in Mechanical, Chemical, Electrical, Materials, Industrial Engineering, or another relevant Engineering discipline.</li><li>Certifications such as Certified Maintenance &amp; Reliability Professional (CMRP), API 580 (Risk-Based Inspection), API 510, API 570, or API 653, ISO 55001 Asset Management, Lean Six Sigma Green Belt (preferably Black Belt), TAPRooT® or equivalent, ISO 9001 Internal Auditor, NEBOSH or equivalent, PMP are preferred.</li></ul><p><b>Experience</b></p><ul><li>Minimum 5 years of experience in one or more of the following:</li><li>Reliability Engineering</li><li>Asset Integrity</li><li>Mechanical Integrity</li><li>Inspection Engineering</li><li>Maintenance Engineering</li><li>Operations Excellence</li><li>Technical Assurance</li><li>Risk Management</li><li>Process Safety Management</li></ul><p><b>Languages</b></p><ul><li>The minimum English language required is KJO L5 – Upper-Intermediate.</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Summary</p><p>We are seeking a Civil Engineer to supervise civil and structural works related to utility and industrial infrastructure. The role will support the delivery of chambers, foundations, buildings, underground services, pipeline routes, and associated construction activities. </p><p><br></p><p>Key Responsibilities </p><p>• Review civil and structural drawings, method statements, and material submissions. </p><p>• Supervise excavation, concrete works, foundations, chambers, and underground installations. </p><p>• Inspect contractor works and verify compliance with approved specifications and quality requirements. </p><p>• Coordinate with other engineering disciplines to resolve site and interface issues.</p><p> • Prepare daily reports, inspection records, snag lists, and handover documentation.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Bachelor's degree in Civil Engineering. </p><p>• Minimum 5 years of experience in infrastructure, utilities, water projects, industrial construction, or similar environments. </p><p>• Knowledge of concrete works, soil conditions, underground services, material quality, and site supervision. </p><p>• Relevant engineering registration, project supervision certification, or recognised health and safety training is required or strongly preferred.</p><p> • Good English communication and report-writing skills.</p><p>Candidate Profile: The ideal candidate should be practical, safety-conscious, organised, and comfortable working with multidisciplinary teams, contractors, and operational stakeholders.</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>WSP is seeking an experienced Drainage Engineer to join our Construction Supervision team in Riyadh, Saudi Arabia, supporting the delivery of a major roads and highways infrastructure project. The successful candidate will be responsible for overseeing the construction, installation, testing, and commissioning of drainage infrastructure works, ensuring compliance with approved designs, technical specifications, applicable standards, and project quality requirements.</p><br><p>The ideal candidate will possess extensive experience in highway drainage systems, stormwater management infrastructure, culverts, channels, detention systems, utility interfaces, and associated civil works within large-scale transportation and infrastructure projects.</p><br><br><br>Responsibilities:<br><p><span><span><strong>Construction Supervision &amp; Inspection</strong></span></span></p><br><ul><li><span><span>Supervise all drainage-related construction activities to ensure works are executed in accordance with approved drawings, specifications, and project requirements.</span></span></li><li><span><span>Monitor contractor performance and ensure compliance with project quality, safety, and environmental standards.</span></span></li><li><span><span>Review and verify construction methodologies, work procedures, inspection and test plans (ITPs), and method statements.</span></span></li><li><span><span>Conduct regular site inspections and audits of drainage works including:&nbsp;</span></span><ul><li><span><span>Stormwater networks</span></span></li><li><span><span>Reinforced concrete drainage structures</span></span></li><li><span><span>Box culverts</span></span></li><li><span><span>Pipe culverts</span></span></li><li><span><span>Open channels</span></span></li><li><span><span>Catch pits and manholes</span></span></li><li><span><span>Headwalls and outfalls</span></span></li><li><span><span>Retention and detention facilities</span></span></li></ul></li><li><span><span>Ensure proper installation, alignment, levels, and workmanship of drainage infrastructure.</span></span></li></ul><p><span><span><strong>Technical Oversight</strong></span></span></p><br><ul><li><span><span>Review drainage shop drawings and contractor submissions.</span></span></li><li><span><span>Verify compliance with approved designs, local authority requirements, and international engineering standards.</span></span></li><li><span><span>Review requests for information (RFIs), technical queries, material approvals, and engineering proposals submitted by contractors.</span></span></li><li><span><span>Identify construction issues and provide practical engineering solutions to maintain project progress.</span></span></li><li><span><span>Coordinate with design teams where design clarifications or modifications are required.</span></span></li></ul><p><span><span><strong>Quality Assurance &amp; Compliance</strong></span></span></p><br><ul><li><span><span>Ensure implementation of quality assurance and quality control procedures.</span></span></li><li><span><span>Witness inspections, testing, and commissioning activities associated with drainage systems.</span></span></li><li><span><span>Review material testing reports and verify compliance with specifications.</span></span></li><li><span><span>Ensure all drainage works are completed to required quality standards prior to acceptance.</span></span></li><li><span><span>Review and verify as-built records and project documentation.</span></span></li></ul><p><span><span><strong>Stakeholder Coordination</strong></span></span></p><br><ul><li><span><span>Coordinate closely with Resident Engineers, Civil Engineers, Highway Engineers, Utility Engineers, Surveyors, and HSE teams.</span></span></li><li><span><span>Interface with contractors, subcontractors, local authorities, utility providers, and client representatives.</span></span></li><li><span><span>Participate in technical meetings, progress meetings, and site coordination workshops.</span></span></li><li><span><span>Support the resolution of construction and interface issues affecting project delivery.</span></span></li></ul><p><span><span><strong>Progress Monitoring &amp; Reporting</strong></span></span></p><br><ul><li><span><span>Monitor progress of drainage construction activities against project schedules.</span></span></li><li><span><span>Identify risks, delays, and potential claims related to drainage works.</span></span></li><li><span><span>Prepare technical reports, inspection reports, NCRs, snagging lists, and progress updates.</span></span></li><li><span><span>Assist senior project leadership in tracking construction performance and project milestones.</span></span></li></ul><br>Qualifications:<br><ul><li><p><span><span>Bachelor's Degree in Civil Engineering or a related engineering discipline.</span></span></p><br></li><li><p><span><span>Professional Engineering registration or membership with a recognized engineering institution is preferred.</span></span></p><br></li><li><p><span><span>Additional qualifications in water engineering, stormwater management, or infrastructure design are advantageous.</span></span></p><br></li><li><p><span><span>Minimum 15 years of professional experience in civil engineering and drainage infrastructure projects.</span></span></p><br></li><li><p><span><span>Demonstrated experience in construction supervision and site management of drainage works.</span></span></p><br></li><li><p><span><span>Previous Middle East experience is highly preferred.</span></span></p><br></li><li><p><span><span>Experience working on projects for major government authorities and transportation agencies is advantageous.</span></span></p><br></li><li><p><span><span>Ability to interpret engineering drawings, specifications, and technical reports.&nbsp;</span></span></p><br></li><li><p><span><span>Experience reviewing contractor submittals, shop drawings, RFIs, and method statements.&nbsp;</span></span></p><br></li><li><p><span><span>Strong understanding of quality control and construction supervision procedures.</span></span></p><br></li></ul><p><span><span><strong>Imagine a better future for you and a better future for us all.</strong></span></span></p><br><p><span><span>Join our close-knit community of talented individuals who share your passion for making a positive impact. Our global team includes more than 80,000 employees, working together to make a difference in communities both close to home and around the world.</span></span></p><br><p><span><span><strong>With us, you can.</strong></span></span><span><span><strong> Apply today.</strong></span></span></p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>We are looking for a <strong>Site Engineer</strong> to coordinate and supervise site activities, inspections, material movement, progress monitoring, and project execution.</p><p>The ideal candidate should have experience in any of the following : <strong>steel structures, steel erection, fabrication, metal works, aluminium, façade, PEB, oil &amp; gas, precast, glass, fit-out, or other related construction and installation projects</strong>.</p><p><strong>Key Responsibilities</strong></p><ul><li>Supervise and coordinate day-to-day <strong>site execution and installation activities</strong>.</li><li>Coordinate with site teams to ensure work is carried out according to approved drawings, specifications, and project requirements.</li><li>Coordinate and follow up on <strong>site inspections</strong>, including <strong>MIR (Material Inspection Request) and WIR (Work Inspection Request)</strong>.</li><li>Coordinate with <strong>consultants, main contractors, subcontractors, and client representatives</strong> regarding inspections, approvals, site activities, and technical requirements.</li><li>Monitor site progress and prepare <strong>daily, weekly, and monthly progress reports</strong>.</li><li>Take and record actual site progress and coordinate with the planning team for progress updates.</li><li>Coordinate closely with the <strong>Project Engineer, Planning Engineer, QA/QC team, site team, and management</strong>.</li><li>Track <strong>material movement in and out of the site</strong>, including deliveries, received quantities, issued materials, usage, and balance quantities.</li><li>Maintain records related to <strong>material tracking, SOR, inspections, progress, and site activities</strong>.</li><li>Follow up on material availability and coordinate with relevant teams to avoid delays to site activities.</li><li>Identify site issues, technical requirements, delays, and discrepancies and report them to the Project Engineer and management.</li><li>Coordinate with fabrication, workshop, procurement, logistics, and project teams whenever required.</li><li>Review and understand <strong>construction, fabrication, shop, and installation drawings</strong> relevant to the project.</li><li>Assist in maintaining proper project and site documentation.</li><li>Ensure site activities are executed in accordance with project requirements, approved documentation, and applicable safety procedures.</li></ul><p><strong>Requirements</strong></p><ul><li>Bachelor’s/Diploma in <strong>Civil Engineering, Structural Engineering, Mechanical Engineering, or a related field</strong>.</li><li>Minimum <strong>3 years of relevant site/construction experience</strong>.</li><li>Experience in any of the following industries will be considered:<ul><li>Structural Steel / Steel Erection</li><li>Steel &amp; Metal Fabrication</li><li>Metal Works</li><li>Aluminium Works</li><li>Façade / Cladding</li><li>PEB / Pre-Engineered Buildings</li><li>Oil &amp; Gas / EPC</li><li>Precast</li><li>Glass &amp; Glazing</li><li>Fit-Out / Architectural Works</li><li>Other related construction, fabrication, or installation industries</li></ul></li><li>Practical knowledge of <strong>site inspections and inspection procedures</strong>, including MIR and WIR.</li><li>Experience coordinating with <strong>consultants and main contractors</strong>.</li><li>Ability to monitor site progress and prepare <strong>progress reports</strong>.</li><li>Experience in <strong>material tracking and site documentation</strong>.</li><li>Ability to read and understand relevant <strong>construction, fabrication, shop, and installation drawings</strong>.</li><li>Good coordination skills with <strong>Project Engineers, Planning Engineers, QA/QC teams, site teams, and management</strong>.</li><li>Good communication, reporting, and problem-solving skills.</li><li><strong>Saudi Arabia / GCC project experience is preferred.</strong></li></ul>

<p>Adree is seeking a Quality Control, Senior Engineer responsible for ensuring product/service quality by performing inspections, tests, and audits across the production or service lifecycle. This role supports continuous improvement initiatives, leads quality documentation, and coordinates with production and other teams to address quality issues effectively. Key Responsibilities Perform and oversee quality inspections and testing according to established standards, work instructions, and relevant specifications. Review batch/production records to ensure compliance with quality procedures . Identify, investigate, and document quality deviations/non-conformities (NCs) and coordinate corrective actions. Conduct root cause analysis (e.g., 5 Whys, Fishbone) and support CAPA (Corrective and Preventive Actions). Ensure proper use and calibration status of measuring instruments/test equipment (as applicable). Monitor product quality trends and report findings to management. Maintain accurate and timely quality documentation (checklists, inspection reports, test records, QA logs). Support internal/external audits by preparing documents and ensuring readiness for audit requirements. Collaborate with production/operations to improve process capability and reduce defects/rework. Train and guide junior QC team members on quality processes, inspection methods, and reporting. 4-7 years of experience in Quality Control / Quality Assurance / Inspection roles (industry-specific). Strong understanding of quality standards, inspection methods, and documentation practices . Knowledge of CAPA, root cause analysis, and quality tools (e.g., 5 Whys, Ishikawa/Fishbone, Pareto). Good attention to detail and ability to follow SOPs and work instructions strictly. Job Location: Client Site</p><p><strong>Desired Candidate Profile</strong></p><p>4-7 years of experience in Quality Control / Quality Assurance / Inspection roles (industry-specific). Strong understanding of quality standards, inspection methods, and documentation practices . Knowledge of CAPA, root cause analysis, and quality tools (e.g., 5 Whys, Ishikawa/Fishbone, Pareto). Good attention to detail and ability to follow SOPs and work instructions strictly.</p>

<h3><strong>About the Opportunity</strong></h3><p>Dar Al Riyadh Consultants is seeking a dedicated <strong>Civil/Structural Engineer</strong> to join their team in <strong>Riyadh, Saudi Arabia</strong>. This <strong>full-time</strong> role is crucial for ensuring the highest standards of civil construction activities through detailed inspections and compliance verification.</p><h3><strong>Role Overview</strong></h3><p>The successful candidate will be instrumental in upholding project integrity and safety by meticulously reviewing construction processes against approved plans, specifications, and industry benchmarks. This position requires a proactive approach to quality control and a commitment to regulatory adherence across all civil construction works.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Conduct detailed inspections of civil construction activities to ensure compliance with approved plans, specifications, and industry standards.</li><li>Verify that all work aligns with local regulations and project-specific requirements.</li><li>Implement and maintain robust quality control processes to ensure the integrity of civil construction works.</li><li>Identify and address any deviations from approved plans, initiating corrective actions as needed.</li><li>Create comprehensive inspection reports, meticulously documenting findings, deviations, and corrective measures.</li><li>Maintain accurate and organized records of all inspection activities and related documentation.</li><li>Collaborate effectively with construction teams, project managers, and other stakeholders to facilitate efficient inspections.</li><li>Provide expert guidance on meeting civil construction requirements throughout project execution.</li><li>Oversee testing and validation procedures for civil construction materials and elements.</li><li>Ensure that all construction materials meet specified standards and project requirements.</li><li>Monitor and enforce stringent safety standards on construction sites.</li><li>Identify and address safety hazards specifically related to civil construction activities.</li><li>Communicate inspection results clearly and professionally to clients, project teams, and relevant authorities.</li><li>Provide informed guidance on addressing any non-compliance issues.</li><li>Stay updated on industry best practices, codes, and emerging technologies in civil construction.</li><li>Recommend improvements to enhance the overall efficiency and quality of civil construction projects.</li></ul><h3><strong>Required Qualifications and Experience</strong></h3><ul><li>A minimum of <strong>15 years of experience</strong> in civil construction inspection or a related field.</li><li>Proven ability to conduct detailed inspections and ensure compliance with industry standards and regulations.</li></ul><h3><strong>Work Setting</strong></h3><p>This is a <strong>full-time position</strong> based in <strong>Riyadh, Saudi Arabia</strong>. The role involves significant on-site presence for inspections and close collaboration with various project stakeholders.</p><h3><strong>Application Process</strong></h3><p>Interested candidates are invited to apply, demonstrating their relevant experience and qualifications for this critical Civil/Structural Engineer role.</p>

Job Summary:The QA/QC Engineer ensures that work / projects are delivered based on good work practices and project specifications to guarantee completion of work within the given time limits with quality of work that meets or even exceeds the clients expectations by implementing international quality standards plans and quality procedures in all the construction activities. Assists in developing the Project Quality Management System by establishing procedures, plans and work instruction as needed.<br>Job Responsibilities:Assist Project QA/QC Manager or Sr. QA/QC Engineer on implementing quality management system at site as per approved Project Quality Plan and IMS Procedures. Prepare work inspection requests (WIR) for each construction activity and submit to consultant to ensure it covers all the construction activities done on site. Check all incoming materials as per project specifications and approved material submittals. Monitor WIRs and test reports and update the Quality Manager and site team on the status. Establish and monitor control of QA/QC Plans, Method of Statements and Test Plans before commencement of the project and implementing it during the project in order to meet the project quality requirements and client’s expectations. Ensure that control of document procedures is implemented and all approved documents from consultant are distributed through the document control system. Check Inspection and Test Plan if available and all method statements and test plan are submitted for the consultant as per the approved ITP plan. Prepare work inspection request (WIR) for each construction activity and submitted to consultant to ensure it covers all the construction activities done on site. Verify if work inspections are carried out as per the plan and advice the construction team for the corrective action to avoid the rejection of work and emphasizes that work inspection shall passed during the first submission with 90% rate. Ensure all incoming materials are checked as per the project specifications and approved material submittals. Inspect all materials internally before offering inspection to the consultant, raising the NCR to the supplier in case the substandard material is delivered, the record of inspection shall be included in the month Quality report. Monitor WIR and test reports and update Management, Construction Team, Planning, Quantity Surveyors and Cost Control Departments about the current job status. Maintain the records of all work and material inspection and provide the data in the weekly progress meetings. Record all test results and ensure its availability for steel along with the mill certificates. Make sure that logs are available along with the test reports for all types of tests as per the approved testing matrix. Checks concrete pour cards are maintained on daily basis and copy is provided to the storekeeper to raise the SRV and to the cost controller/QSSupport the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies.<br>Job Knowledge & Skills Knowledge of work-related standards, specifications, and quality systems such as: ISO 9001, QCS, SMACNA,ASHRAE, NFPA, etc.). With enough technical experience on dealing with various QC issues. Knowledge of localemployment laws/regulations sufficient to analyze proposed policies. In-depth knowledge on the Quality Management System (QMS) or Integrated Management System (IMS) ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.<br>Job Experience and Education:Bachelor's in civil engineering or any related engineering

<p>WSP is seeking an experienced Drainage Engineer to join our Construction Supervision team in Riyadh, Saudi Arabia, supporting the delivery of a major roads and highways infrastructure project. The successful candidate will be responsible for overseeing the construction, installation, testing, and commissioning of drainage infrastructure works, ensuring compliance with approved designs, technical specifications, applicable standards, and project quality requirements. The ideal candidate will possess extensive experience in highway drainage systems, stormwater management infrastructure, culverts, channels, detention systems, utility interfaces, and associated civil works within large-scale transportation and infrastructure projects. Bachelor's Degree in Civil Engineering or a related engineering discipline. Professional Engineering registration or membership with a recognized engineering institution is preferred. Additional qualifications in water engineering, stormwater management, or infrastructure design are advantageous. Minimum 15 years of professional experience in civil engineering and drainage infrastructure projects. Demonstrated experience in construction supervision and site management of drainage works. Previous Middle East experience is highly preferred. Experience working on projects for major government authorities and transportation agencies is advantageous. Ability to interpret engineering drawings, specifications, and technical reports. Experience reviewing contractor submittals, shop drawings, RFIs, and method statements. Strong understanding of quality control and construction supervision procedures. Imagine a better future for you and a better future for us all. Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself? With us, you can. Apply today.</p><p><strong>Construction Supervision &amp; Inspection</strong></p><ul><li>Supervise all drainage-related construction activities to ensure works are executed in accordance with approved drawings, specifications, and project requirements.</li><li>Monitor contractor performance and ensure compliance with project quality, safety, and environmental standards.</li><li>Review and verify construction methodologies, work procedures, inspection and test plans (ITPs), and method statements.</li><li>Conduct regular site inspections and audits of drainage works including:<ul><li>Stormwater networks</li><li>Reinforced concrete drainage structures</li><li>Box culverts</li><li>Pipe culverts</li><li>Open channels</li><li>Catch pits and manholes</li><li>Headwalls and outfalls</li><li>Retention and detention facilities</li></ul></li><li>Ensure proper installation, alignment, levels, and workmanship of drainage infrastructure.</li></ul><p><strong>Technical Oversight</strong></p><ul><li>Review drainage shop drawings and contractor submissions.</li><li>Verify compliance with approved designs, local authority requirements, and international engineering standards.</li><li>Review requests for information (RFIs), technical queries, material approvals, and engineering proposals submitted by contractors.</li><li>Identify construction issues and provide practical engineering solutions to maintain project progress.</li><li>Coordinate with design teams where design clarifications or modifications are required.</li></ul><p><strong>Quality Assurance &amp; Compliance</strong></p><ul><li>Ensure implementation of quality assurance and quality control procedures.</li><li>Witness inspections, testing, and commissioning activities associated with drainage systems.</li><li>Review material testing reports and verify compliance with specifications.</li><li>Ensure all drainage works are completed to required quality standards prior to acceptance.</li><li>Review and verify as-built records and project documentation.</li></ul><p><strong>Stakeholder Coordination</strong></p><ul><li>Coordinate closely with Resident Engineers, Civil Engineers, Highway Engineers, Utility Engineers, Surveyors, and HSE teams.</li><li>Interface with contractors, subcontractors, local authorities, utility providers, and client representatives.</li><li>Participate in technical meetings, progress meetings, and site coordination workshops.</li><li>Support the resolution of construction and interface issues affecting project delivery.</li></ul><p><strong>Progress Monitoring &amp; Reporting</strong></p><ul><li>Monitor progress of drainage construction activities against project schedules.</li><li>Identify risks, delays, and potential claims related to drainage works.</li><li>Prepare technical reports, inspection reports, NCRs, snagging lists, and progress updates.</li><li>Assist senior project leadership in tracking construction performance and project milestones.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Degree in Civil Engineering or a related engineering discipline. Professional Engineering registration or membership with a recognized engineering institution is preferred. Additional qualifications in water engineering, stormwater management, or infrastructure design are advantageous. Minimum 15 years of professional experience in civil engineering and drainage infrastructure projects. Demonstrated experience in construction supervision and site management of drainage works. Previous Middle East experience is highly preferred. Experience working on projects for major government authorities and transportation agencies is advantageous. Ability to interpret engineering drawings, specifications, and technical reports. Experience reviewing contractor submittals, shop drawings, RFIs, and method statements. Strong understanding of quality control and construction supervision procedures.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Summary</p><p>We are seeking an Electrical Engineer to support power supply and electrical control systems for water and industrial facilities. The role will help maintain safe, reliable electrical operations and support the integration of pumps, control panels, smart meters, RTUs, and SCADA systems. </p><p><br></p><p>Key Responsibilities </p><p>• Review electrical designs, single-line diagrams, panel schedules, and equipment specifications.</p><p> • Supervise installation, testing, commissioning, and maintenance of electrical systems. </p><p>• Inspect MCC panels, VFDs, UPS systems, earthing, and surge-protection arrangements.</p><p> • Coordinate with contractors and technical teams to resolve electrical issues. </p><p>• Prepare inspection reports, test records, and technical recommendations.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Bachelor's degree in Electrical Engineering.</p><p> • Minimum 5 years of experience in utilities, water facilities, industrial plants, pumping stations, or infrastructure projects.</p><p> • Working knowledge of electrical distribution, motor controls, protection systems, and industrial control interfaces. </p><p>• Relevant engineering registration or certification in electrical systems, safety, testing, or project supervision is required or strongly preferred. </p><p>• Good English communication, reporting, and site-management skills.</p><p>Candidate Profile: The ideal candidate should be practical, safety-conscious, organised, and comfortable working with multidisciplinary teams, contractors, and operational stakeholders.&nbsp;</p></div>

<div>We are seeking an experienced HSE Engineer to join our Construction Supervision team in Jeddah, Saudi Arabia. The successful candidate will support the delivery of major transport, road, and infrastructure utilities projects, ensuring compliance with project HSE requirements, Saudi regulations, and international best practices. This is a site-based supervision role requiring extensive experience working with engineering consultants on infrastructure projects within Saudi Arabia.</div> <div> <ul> <li>Bachelor's Degree in Engineering or related discipline.</li> <li>Professional HSE qualification such as NEBOSH IGC, NEBOSH Construction Certificate, IOSH, or equivalent.</li> <li>Minimum 8 to 12 years of overall experience with at least 5 years of experience in Saudi Arabia.</li> <li>Demonstrated experience on transportation, roads, highways, infrastructure, and utility projects within KSA.</li> <li>Previous experience working for engineering consultants or construction supervision consultants is essential.</li> <li>Strong knowledge of Saudi HSE regulations, infrastructure construction risks, and industry best practices.</li> <li>Experience monitoring utility works including wet and dry utilities, stormwater, drainage, potable water, irrigation, power, and telecommunications networks.</li> <li>Excellent report writing and communication skills in English.</li> <li>Ability to engage effectively with contractors, client representatives, and project stakeholders.</li> <li>Saudi Council of Engineers registration preferred.</li> <li>Relevant professional certifications and training in construction safety will be an advantage.</li> <li>Candidates must have a dominant background in KSA infrastructure supervision projects and consultant-side delivery.</li> <li>Candidates with primary experience in building projects, contractor-only environments, design offices, or corporate HSE roles are not preferred.</li> </ul> <p> </p> <p>Imagine a better future for you and a better future for us all.</p> <p>Work with us and be part of a team shaping the future of infrastructure and sustainable communities across Saudi Arabia and beyond.</p> </div> <div> <ul> <li>Monitor contractor compliance with project HSE requirements, specifications, and approved safety plans.</li> <li>Conduct regular site inspections, audits, and safety observations across road, utility, and infrastructure works.</li> <li>Review and monitor method statements, risk assessments, permit systems, and emergency response procedures.</li> <li>Identify unsafe acts and conditions and ensure timely implementation of corrective and preventive actions.</li> <li>Support the Resident Engineer in enforcing project health, safety, and environmental requirements.</li> <li>Monitor excavation works, utility diversions, traffic management activities, lifting operations, and confined space works.</li> <li>Review contractor HSE performance and prepare daily, weekly, and monthly safety reports.</li> <li>Participate in incident investigations and verify the implementation of corrective measures.</li> <li>Coordinate with project stakeholders to promote safety awareness and continuous improvement initiatives.</li> <li>Monitor environmental compliance relating to waste management, dust control, noise mitigation, and environmental protection measures.</li> <li>Ensure compliance with Saudi regulations, client requirements, and international HSE standards.</li> <li>Conduct toolbox talks, safety briefings, and site inductions as required.</li> <li>Maintain accurate records of inspections, audits, incidents, and corrective action tracking.</li> </ul> </div>

<h3><strong>About Parsons and the Opportunity</strong></h3><p>Parsons Corporation is seeking a <strong>Lead Engineer - Fuel</strong> to join its team in Riyadh. This full-time position requires 5-10 years of experience and involves providing technical leadership and coordination for complex aviation fuel systems and infrastructure projects.</p><h3><strong>Role Overview</strong></h3><p>The Lead Engineer - Fuel will be responsible for providing comprehensive technical engineering support and coordination across the entire project lifecycle, from design and construction to testing, commissioning, and handover of aviation fuel systems and associated infrastructure. This role ensures that all engineering activities comply with approved designs, project specifications, applicable aviation fuel standards, international codes, and client requirements. Close coordination with design consultants, contractors, and various project teams is essential for effective technical delivery and issue resolution.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Lead and coordinate engineering activities for aviation fuel systems and infrastructure.</li><li>Review and coordinate the design and technical delivery of fuel storage, distribution, transfer, and dispensing systems.</li><li>Evaluate engineering deliverables including drawings, specifications, calculations, technical reports, and equipment data sheets.</li><li>Ensure fuel system designs adhere to project specifications, client requirements, and industry standards.</li><li>Coordinate interfaces between Fuel Systems and other disciplines such as Civil, Structural, Mechanical, Electrical, Instrumentation, ICT, Fire &amp; Life Safety, and Airfield.</li><li>Review fuel demand, flow, system capacity, pressure requirements, and hydraulic calculations.</li><li>Provide technical support for fuel pumping, transfer, filtration, metering, control, and monitoring systems.</li><li>Review technical requirements for pumps, valves, filters, meters, tanks, instrumentation, and control panels.</li><li>Support technical review of fuel hydrant systems, including pits, isolation valves, control systems, and aircraft servicing interfaces.</li><li>Review design provisions for isolation, drainage, venting, pressure control, emergency shutdown, leak detection, and system safety.</li><li>Coordinate with relevant disciplines regarding hazardous area classification and equipment requirements.</li><li>Review vendor and contractor technical submittals for compliance with approved specifications.</li><li>Respond to RFIs, technical queries, design clarifications, and site technical issues.</li><li>Provide engineering support to construction teams and assist in resolving installation issues.</li><li>Participate in design and constructability reviews to identify potential technical and interface issues.</li><li>Coordinate with Quality teams on inspection and testing requirements.</li><li>Review and support preparation of Inspection &amp; Test Plans (ITPs), testing procedures, and commissioning requirements.</li><li>Provide technical support during fuel system installation, testing, pre-commissioning, and commissioning.</li><li>Verify testing activities including pressure testing, pipeline integrity testing, flushing, cleaning, leak testing, and functional testing.</li><li>Support commissioning teams during system start-up, functional testing, and performance verification.</li><li>Review technical documentation and ensure engineering records are maintained throughout project execution.</li><li>Review and coordinate as-built drawings, technical dossiers, O&amp;M documentation, and handover requirements.</li><li>Support the assessment of design changes, technical alternatives, and engineering variations.</li><li>Provide technical input for engineering-related changes and potential claims.</li><li>Identify technical risks, design gaps, constructability issues, and interface constraints, recommending mitigation measures.</li><li>Participate in engineering coordination meetings with consultants, contractors, vendors, and project stakeholders.</li><li>Track engineering actions, technical comments, RFIs, and design deliverables for timely closure.</li><li>Support the development of technical solutions to improve system reliability, maintainability, safety, and operational performance.</li><li>Provide technical guidance and support to Fuel Engineers and junior engineering personnel.</li><li>Maintain effective communication with construction and commissioning teams to ensure proper implementation of engineering requirements on site.</li></ul><h3><strong>Required Skills and Experience</strong></h3><p>Candidates for this role should possess 8+ years of relevant experience in fuel systems engineering and demonstrate the following skills:</p><ul><li>Strong technical and analytical skills.</li><li>Sound engineering judgment and problem-solving abilities.</li><li>Strong coordination and interface management skills.</li><li>Excellent communication and stakeholder management capabilities.</li><li>Ability to work effectively with consultants, contractors, vendors, and multidisciplinary teams.</li><li>Strong attention to detail and commitment to engineering quality.</li><li>Proactive approach to identifying technical issues and risks.</li><li>Ability to work under demanding project schedules.</li><li>Strong teamwork and collaboration skills.</li><li>Ability to provide technical guidance to junior engineers.</li><li>Good understanding of construction and commissioning requirements.</li><li>Strong commitment to safety, quality, and technical compliance.</li></ul><h3><strong>Compliance and Technical Standards</strong></h3><p>A critical aspect of this role involves ensuring strict compliance with applicable industry standards and codes. The Lead Engineer - Fuel will be responsible for upholding adherence to JIG, EI/JIG, NFPA, API, ASME, ASTM, IEC, ISO, and other relevant standards pertinent to the project's scope and requirements.</p><h3><strong>Work Environment</strong></h3><p>This full-time position is based in Riyadh, where the Lead Engineer - Fuel will collaborate with diverse project teams and stakeholders to deliver critical aviation fuel infrastructure projects.</p>

<h3 >About Flowserve and the Opportunity</h3> <p >Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems, supporting over 10,000 customers globally across various essential industries. Committed to excellence, innovation, and sustainability, Flowserve operates with over 16,000 employees in 50+ countries. We are seeking a <strong >Pump E&amp;I QC Engineer</strong> to join our team in <strong >Al Qatif, Saudi Arabia</strong>. This full-time role is ideal for a professional with 2-5 years of relevant experience who is ready to contribute to our mission of creating extraordinary flow control solutions.</p> <h3 >Role Overview</h3> <p >The Pump E&amp;I QC Engineer is responsible for performing documented inspections to verify the conformance of parts to applicable drawings, procedures, specifications, and all statutory and regulatory requirements. This role involves developing the Inspection Test Plan (ITP) and project quality plan in accordance with customer and Flowserve specifications, as well as international standards. The Quality Engineer will also define, advise on, and control all project-required QC documents. Direct experience in Pump OEM and/or skid-mounted equipment manufacturing is essential for this position, which reports directly to the Quality Supervisor.</p> <h3 >Key Responsibilities</h3> <ul > <li >Prepare and define test and inspection requirements for projects, including ITPs and procurement specifications.</li> <li >Attend inspection and expediting activities as per notifications.</li> <li >Preside over Pre-Inspection Meetings (PIM).</li> <li >Implement quality activities on manufactured equipment and materials according to approved ITPs and procedures.</li> <li >Review and endorse vendor/manufacturer test reports and records (IRB, MDRB).</li> <li >Prepare Inspection Reports and Expediting Reports.</li> <li >Conduct shop and desk expediting.</li> <li >Review and verify punch lists and non-conformances.</li> <li >Issue Inspection Release Certificates when necessary.</li> <li >Prepare Inspection Disposition Reports (IDR).</li> <li >Coordinate with project coordinators, clients, vendors, and quality personnel for proper assignment execution.</li> <li >Perform sourcing inspection for electrical equipment such as Motors and LOS, and participate in Factory Acceptance Tests (FAT).</li> <li >Execute any other assigned duties.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >Bachelor's degree in Engineering.</li> <li >3-5 years of relevant experience in a Pump OEM and/or skid-mounted equipment manufacturing environment.</li> <li >Proficiency with Saudi Aramco Standards requirements, including 34-SAMSS-831/711, 611, SA-8020-831, 17-SAMSS-502, 503, 515, IR-340200, and IR-173700.</li> <li >Holding QM01, QM02, QM21, and QM36 qualifications is an advantage.</li> <li >Certified Internal/Lead Auditor 9001:2015.</li> </ul> <h3 >Technical Skills and Attributes</h3> <ul > <li >Knowledge of NEMA, NFPA 70E, NFPA 72, IEC, NEC, IEEE, and other relevant standards.</li> <li >Familiarity with inspection equipment typically found in pump skids, instrumentation assembly, and test operations, including associated accessories.</li> <li >Understanding of established quality standards, laws, and regulations from national and international bodies.</li> <li >Flexible, eager to learn, accurate, and analytical with a positive, can-do attitude.</li> <li >Demonstrated operational excellence and high standards of customer service.</li> <li >Strong interpersonal, communication, negotiation, analytical, and presentation skills.</li> <li >Proven problem-solving abilities.</li> <li >Flexibility and willingness to travel.</li> </ul> <h3 >What Flowserve Offers</h3> <ul > <li >A supportive and collaborative work environment.</li> <li >Clear career development and internal growth opportunities.</li> <li >A strong commitment to sustainability and responsible business practices.</li> <li >The opportunity to be part of a global organization with a strong market reputation.</li> <li >High standards for health, safety, and quality.</li> <li >An inclusive and respectful workplace culture.</li> <li >The chance to work alongside experienced professionals and industry experts.</li> </ul>

Job Purpose: Ensure civil installations and related construction activities comply with approved engineering drawings, project specifications, quality requirements, and applicable industry standards by performing independent compliance verification throughout project execution and prior client acceptance.<br>Compliance Assurance• Conduct compliance inspections of civil works associated with substations, transmission systems, and related infrastructure.•Verify completed installations following QC inspections and before client inspections.•Confirm compliance with approved drawings, specifications, procedures, and standards. Technical Compliance Review•Identify design, specification, and field implementation discrepancies.•Validate installation quality and adherence to project technical standards.• Report technical deviations, incomplete scope, and material shortages. Reporting & Documentation•Prepare compliance reports, observations, and corrective action recommendations.•Maintain accurate inspection and verification records.• Monitor closure of identified compliance findings. Stakeholder Collaboration•Coordinate with project engineering, construction, quality, and client teams.•Participate in audits, reviews, and handover readiness assessments.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Adree is seeking a Quality Control, Senior Engineer responsible for ensuring product/service quality by performing inspections, tests, and audits across the production or service lifecycle.<br> This role supports continuous improvement initiatives, leads quality documentation, and coordinates with production and other teams to address quality issues effectively.<br> Key Responsibilities Perform and oversee quality inspections and testing according to established standards, work instructions, and relevant specifications.<br> Review batch/production records to ensure compliance with quality procedures .<br> Identify, investigate, and document quality deviations/non-conformities (NCs) and coordinate corrective actions.<br> Conduct root cause analysis (e.<br>g., 5 Whys, Fishbone) and support CAPA (Corrective and Preventive Actions).<br> Ensure proper use and calibration status of measuring instruments/test equipment (as applicable).<br> Monitor product quality trends and report findings to management.<br> Maintain accurate and timely quality documentation (checklists, inspection reports, test records, QA logs).<br> Support internal/external audits by preparing documents and ensuring readiness for audit requirements.<br> Collaborate with production/operations to improve process capability and reduce defects/rework.<br> Train and guide junior QC team members on quality processes, inspection methods, and reporting.<br> 4-7 years of experience in Quality Control / Quality Assurance / Inspection roles (industry-specific).<br> Strong understanding of quality standards, inspection methods, and documentation practices .<br> Knowledge of CAPA, root cause analysis, and quality tools (e.<br>g., 5 Whys, Ishikawa/Fishbone, Pareto).<br> Good attention to detail and ability to follow SOPs and work instructions strictly.<br> Job Location: Client Site</span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>Purpose: The solar Pv Site Engineer shall support the execution, installation, testing, commissioning, and technical coordination of Solar PV systems at project sites. The Engineer will ensure that site activities are carried out in accordance with approved drawings, specifications, method statements, applicable international standards, Saudi regulations, SEC requirements, and project requirements. Scope: To provide site engineering and execution support for Solar PV systems Responsibilities: Conduct site visits and surveys and collect required technical information. Review approved PV layouts, SLDs, electrical drawings, cable routes, equipment datasheets, and relevant technical documents before execution. Coordinate daily site activities with supervisors, technicians, subcontractors, suppliers, and the project team. Supervise Solar PV installation activities and monitor compliance with approved drawings and project specifications. Monitor installation of PV modules, mounting structures, inverters, cables, electrical panels, monitoring systems, and associated equipment. Perform site inspections and identify installation or workmanship issues requiring corrective action. Report technical issues, site constraints, and deviations to the Project Manager or direct manager. Coordinate with the design team regarding site conditions or required technical modifications. Verify delivered materials against approved material submittals and report any discrepancies. Support preparation and coordination of inspection requests. Participate in testing and commissioning activities for the Solar PV system. Assist with electrical testing, functional testing, inverter commissioning, and system performance verification. Monitor site progress and prepare regular progress updates and site reports. Maintain site documentation, including: Daily/site reports, Installation records, Inspection records, Testing and commissioning records, Progress photographs, Redline drawings, As-built information Support the preparation of as-built drawings, O&amp;M documentation, testing records, and project handover documents. Follow applicable HSE requirements and immediately report unsafe conditions or practices. Coordinate technical matters with suppliers and manufacturers when required. Maintain good communication with the project team and other relevant parties. Perform other Solar PV site engineering tasks assigned by the direct manager.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>BSc, degree in Electrical or a related discipline.</li><li>1+ yearsu2019 experience in Solar PV/Industrial projects</li><li>Preferred qualifications include being a SEC Certified Installer or Designer.</li><li>Strong technical background.</li><li>Good knowledge at understanding PV Systems reports (PVsyst, Helioscope, and STAAD Pro)</li><li>Have experience in construction, operation, and Monitoring of PV plant.</li><li>Strong knowledge of Safety and Risk assessment.</li><li>Fluency in English required</li></ul><p>Preferred Skills</p><ul><li>Good English writing skills to make comprehensive reports also verbal communication skills.</li><li>Good Technical, analytical, and problem-solving skills.</li><li>Good Knowledge of MS office (Project, Word &amp; PPT, Excel) is required to carry out the job</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br><p>SYSTRA is one of the world's leading engineering and consultancy groups specialising in public transport and sustainable mobility. With over 10,300 employees, SYSTRA's mission is to design safe and sustainable transport solutions to bring people together, develop social inclusion and facilitate access to employment, education and leisure throughout the world.</p><br><br><p>For 65 years, the Group has been working alongside cities and regions to contribute to their development by creating, improving and modernising their infrastructure and transport systems, throughout the life cycle of their projects. SYSTRA is involved from the earliest stages of design through to the testing, deployment and maintenance phases. The company provides all its services in over 80 countries worldwide and generates 74% of its turnover internationally. With its new services, SYSTRA supports its clients and partners in their digital, ecological and energy transition, in order to invent the mobility of tomorrow.</p><br><br> Context <br><p><span><span>SYSTRA’s Mobility &amp; Railway Business Unit is anticipating future growth, with new metro projects. To support these potential opportunities, we are looking for an experienced Mechanical Engineer to join our project teams and contribute to our mobility solutions.&nbsp;&nbsp;</span></span></p><br><br><p><span><span>The Mechanical Engineer will p</span></span>rovide engineering and technical support for all mechanical works performed on site therefore, SYSTRA is looking for <strong>Mechanical Engineer (Saudi National)</strong> to join our team to be based at Riyadh , Saudi Arabia.</p><br><br> Missions/Main Duties <br><ul><li>Implement and monitor mechanical construction activities in accordance with approved drawings, method statements, project specifications, and safety requirements.</li><li>Review contractor mechanical shop drawings in coordination with structural, architectural, and electrical disciplines to ensure proper integration and compliance.</li><li>Conduct regular site inspections and evaluate subcontractor performance to ensure quality and compliance with project requirements.</li><li>Support and guide site inspectors on mechanical engineering matters and assist in resolving technical issues.</li><li>Work closely with site inspectors to maintain complete and accurate Inspection and Test Records (ITRs).</li><li>Review site preparation activities and temporary works to verify compliance with contract documents and project standards.</li><li>Supervise mechanical installations and monitor contractor construction schedules related to MEP works.</li><li>Identify, report, and assist in resolving technical issues related to HVAC, smoke management systems, plumbing, firefighting systems, escalators, elevators, and other mechanical services.</li><li>Maintain and track mechanical defects, snags, and punch-list items, ensuring timely corrective action by contractors.</li><li>Review and provide comments on testing and commissioning results for mechanical systems.</li><li>Attend project meetings, site progress meetings, and technical coordination meetings with clients and project stakeholders.</li><li>Monitor compliance with site safety, health, environmental, and security requirements.</li><li>Assist in planning and sequencing construction activities in accordance with the Project Quality Plan.</li><li>Monitor work progress and support verification for progress payments and schedule reporting.</li><li>Review Field Change Requests (FCRs) and provide technical input regarding mechanical-related variations and claims.</li><li>Implement corrective actions to address delays and support timely completion of project objectives.</li><li>Prepare daily reports, inspection reports, estimates, and other project documentation as required.</li><li>Participate in final inspections, snagging activities, and project closeout processes.</li></ul> Profile/Skills <br><ul><li>Bachelor’s Degree in Mechanical Engineering or a related discipline from an accredited institution.</li><li>Minimum 5 years of relevant site-based experience on construction projects involving mechanical systems.</li><li>Extensive experience with HVAC systems, smoke management systems, plumbing, firefighting systems, escalators, and elevators.</li><li>Strong ability to interpret and execute mechanical drawings and technical documentation.</li><li>Sound understanding of engineering drawings, multidisciplinary interfaces, and construction processes.</li><li>Good knowledge of site management practices, construction safety requirements, and quality control procedures.</li><li>Strong technical, organizational, and problem-solving skills.</li><li>Ability to coordinate effectively with contractors, consultants, clients, and multidisciplinary teams.</li></ul> <br><p>Systra is an equal opportunities company; this position is open to all applicants.</p><br><br> Workplace Type <p>..</p><br><br> <br> Why SYSTRA? Read more <span> sur Why SYSTRA?</span> <br> <br> <br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Nationality"> <b>Nationality</b> </div> <div class="col is-9 p5" data-automation-id="data_Nationality"> Saudi Arabia </div> </div> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h3 >About the Role</h3> <p >Saudi Aramco is seeking a <strong >Subsea Engineer</strong> to join its Marine Operations Division. This full-time position is for a professional with 5-10 years of experience in subsea engineering. The Marine Operations Division is responsible for leading the planning, engineering, and delivery of key subsea tasks to ensure safe and efficient vessel operations.</p> <h3 >Role Purpose</h3> <p >The primary purpose of this role is to provide comprehensive subsea services to offshore customers. This includes managing diving and Remote Operated Vehicle (ROV) operations for underwater inspections, repairs, maintenance, and construction. The Subsea Engineer will also provide an advanced level of technical expertise and support in resolving complex technical issues related to subsea operations.</p> <h3 >Operational Responsibilities</h3> <ul > <li >Serve as the main interface between diving operations and their customers, facilitating the development of detailed procedures, equipment lists, and other relevant requirements.</li> <li >Lead the onshore planning and offshore execution of subsea operations.</li> <li >Perform the role of Client Worksite Representative offshore when necessary, ensuring the intervention contractor has correct site information and that the site is safe for use by identifying known hazards.</li> </ul> <h3 >Technical Leadership and Compliance</h3> <ul > <li >Act as the focal point for all Scope of Work (SOW) reviews, design reviews, and Saudi Aramco engineering compliance.</li> <li >Ensure all subsea work is in full compliance with Saudi Aramco’s Marine Operations Manual and internally recognized Marine Guidance Documents.</li> <li >Provide technical input to any development projects, supplying functional guidance to engineering contractors on discipline-specific matters to ensure quality of work meets Aramco standards, within a timely and cost-effective manner.</li> <li >Act as Saudi Aramco's technical point of contact for all subsea project contracts.</li> <li >Provide technical input for any decommissioning or new projects when necessary.</li> </ul> <h3 >Required Experience and Expertise</h3> <p >Candidates for this position must possess 5-10 years of professional experience in subsea engineering. The role requires an advanced level of technical expertise and proven ability to support and resolve complex technical issues related to subsea operations.</p> <h3 >Work Environment</h3> <p >This is a full-time role within Saudi Aramco's Marine Operations Division, contributing to the safety and efficiency of offshore vessel operations. The position involves both onshore planning and offshore execution responsibilities.</p>