Inspection Engineer Jobs in Saudi

The QC Inspector - Instrument performs inspection and testing of instrumentation construction activities to verify compliance with drawings, specifications, and applicable standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on instrumentation installation works Witness loop checks, calibration, and instrument testing activities per the ITP Verify instrument installation, tubing, and wiring against approved drawings and specifications Verify materials and instruments against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of test and measuring equipment used on site Support punch-list generation and verification of closure for instrumentation works Ensure work fronts comply with approved method statements and instrumentation standards Support preparation of quality documentation for instrumentation handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Instrumentation Inspection Techniques Reading Loop Diagrams & Instrument Datasheets Calibration & Loop Checking Verification Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on instrumentation construction projects<br><br>Education<br><br> Diploma or Bachelor's degree in Instrumentation Engineering QC/inspection certification preferred

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Mitsubishi Power Saudi Arabia | Rotor Shop</b></p><p><br></p><p>At Mitsubishi Power Saudi Arabia, we are looking for a Junior Repair Engineer to join our Rotor Shop team, supporting repair and refurbishment activities across Gas Turbine, Steam Turbine, and Compressor components.</p><p>The role offers hands-on exposure to repair engineering, metallurgy, materials assessment, failure investigation, and process development within a specialized engineering environment.</p><p>------------------------------------------------------------</p><p>Your Responsibilities</p><p><br></p><p>As a Junior Repair Engineer, you will:</p><ul><li>Establish and support work procedures and standards for component repair and refurbishment.</li><li>Support the implementation of Mitsubishi Power Saudi Arabia quality policies.</li><li>Prepare and revise Quality Management procedures when required.</li><li>Support repair process development, qualification, and continuous improvement activities.</li><li>Perform and support Root Cause Analysis (RCA) for process-related concerns.</li><li>Assist in the metallurgical examination and assessment of materials and processes.</li><li>Perform observations and evaluations using techniques such as visual inspection, macro photography, microscopy, and mechanical testing</li><li>Work closely with Materials and Repair Engineering teams to qualify repair processes.</li><li>Support planning and completion of repair and maintenance activities.</li><li>Prepare technical reports and documentation to communicate project status and results.</li><li>Participate in internal audits using inspection results and statistical techniques.</li><li>Support engineering activities related to steel and nickel-based superalloys, welding, heat treatment, and coatings.</li><li>Provide training and technical guidance to other engineers and supplier vendors when required.</li><li>Work in accordance with health and safety guidelines while maintaining high-quality standards.</li></ul><p><br></p><p>------------------------------------------------------------</p><p>What You Bring? </p><p><br></p><ul><li>Degree or equivalent-level qualification in Mechanical Engineering, Aeronautical Engineering, Materials Engineering, or a related engineering discipline.</li><li>Good knowledge of engineering materials.</li><li>Familiarity with laboratory metallurgy, material assessment, and mechanical testing.</li><li>Knowledge of metallographic preparation techniques, particularly for steels, nickel-based superalloys, and coatings.</li><li>Understanding of typical mechanical testing methods, including tensile, fatigue, and stress rupture testing.</li><li>Good computer skills, particularly Microsoft Excel, Word, and PowerPoint.</li><li>Experience with imaging software would be an advantage.</li><li>Good technical report-writing skills.</li><li>A flexible approach to problem-solving and the ability to work effectively under pressure.</li></ul><p><br></p><p>------------------------------------------------------------</p><p><br></p><p>Build Your Engineering Career With Us</p><p><br></p><p>This role provides the opportunity to work across specialized repair engineering activities involving turbine components, materials, inspection, testing, and repair process development.</p><p>If you are ready to develop your technical capabilities and contribute to high-quality engineering and repair operations at Mitsubishi Power Saudi Arabia, we look forward to receiving your application.</p><p><br></p><p><b>Apply now and move the world forward with Mitsubishi Power.</b>.</p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>The skills we’re looking for:</b></p><p><br></p><p>To succeed in this role, you’ll bring a combination of technical knowledge, analytical thinking, and a hands-on approach to engineering challenges. Key skills include:</p><p><br></p><ul><li>Gas Turbine Repair &amp; Refurbishment</li><li>Metallurgy &amp; Materials Assessment</li><li>Metallographic Preparation Techniques</li><li>Mechanical Testing</li><li>Root Cause Analysis (RCA)</li><li>Failure Investigation</li><li>Repair Process Development &amp; Qualification</li><li>Visual Inspection &amp; Microscopy</li><li>Welding &amp; Heat Treatment Knowledge</li><li>Nickel-Based Superalloys &amp; Steels</li><li>Coatings Knowledge</li><li>Quality Management Procedures</li><li>Technical Report Writing</li><li>Problem Solving &amp; Analytical Skills</li><li>Microsoft Excel, Word &amp; PowerPoint</li><li>Teamwork &amp; Cross-functional Collaboration</li></ul></div>

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About the Role</h3> <p style="margin:0 0 12px; ************;">Parsons Corporation is seeking a Fire &amp; Life Safety Engineer/Inspector to join our team in Riyadh, Saudi Arabia. This full-time role involves providing technical oversight, inspection, testing, and compliance verification for Fire &amp; Life Safety (FLS) systems across various projects. The position ensures that FLS installations adhere to approved designs, project specifications, applicable fire codes and standards, Civil Defense requirements, and client specifications.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Core Responsibilities</h3> <p style="margin:0 0 12px; ************;">The Fire &amp; Life Safety Engineer/Inspector will coordinate closely with multiple project teams, including Engineering, Construction, Quality, HSE, Commissioning, and ICT/ELV, as well as specialist contractors, vendors, consultants, and Airport Operations. Key responsibilities include:</p> <ul style="margin:0 0 0 24px; padding-inline-start:0; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Reviewing and inspecting FLS systems in accordance with approved drawings, specifications, ITPs, method statements, and applicable codes.</li> <li style="margin:0 0 6px;">Conducting site inspections to verify the quality and compliance of FLS installations.</li> <li style="margin:0 0 6px;">Reviewing approved shop drawings, coordinated drawings, material submittals, calculations, and technical documentation.</li> <li style="margin:0 0 6px;">Coordinating FLS interfaces with Building Management Systems (BMS), Information and Communication Technology (ICT), Security, Access Control, HVAC, Electrical, Elevators, and other building systems.</li> <li style="margin:0 0 6px;">Identifying FLS design, installation, and interface risks, and escalating issues to the responsible engineering team.</li> <li style="margin:0 0 6px;">Providing technical recommendations to resolve installation and compliance issues.</li> <li style="margin:0 0 6px;">Ensuring all FLS activities comply with applicable NFPA, IBC, IFC, BS, EN, Saudi Building Code, Civil Defense, and project-specific requirements.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">System Inspection and Verification</h3> <p style="margin:0 0 12px; ************;">Specific inspection duties cover a broad range of fire and life safety components, including:</p> <ul style="margin:0 0 0 24px; padding-inline-start:0; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Inspecting installation of fire alarm, fire detection, sprinkler, hydrant, hose reel, fire pump, fire suppression, smoke control, and emergency lighting systems.</li> <li style="margin:0 0 6px;">Verifying fire alarm devices such as smoke detectors, heat detectors, manual call points, sounders, strobes, modules, and panels.</li> <li style="margin:0 0 6px;">Inspecting fire suppression systems including sprinkler networks, clean agent systems, water mist, and foam systems.</li> <li style="margin:0 0 6px;">Inspecting fire water systems, including fire pumps, jockey pumps, fire tanks, hydrants, hose reels, valves, and associated pipework.</li> <li style="margin:0 0 6px;">Verifying passive fire protection elements such as fire-rated equipment, fire stopping, fire doors, and fire-rated penetrations.</li> <li style="margin:0 0 6px;">Inspecting emergency lighting, exit signage, and evacuation systems.</li> <li style="margin:0 0 6px;">Verifying FLS system installation against approved layouts, coverage requirements, equipment locations, and design criteria.</li> <li style="margin:0 0 6px;">Reviewing and verifying hydraulic calculations, flow, pressure, and system zoning.</li> <li style="margin:0 0 6px;">Inspecting FLS system cabling, containment, interfaces, labeling, and termination.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Testing, Documentation, and Compliance</h3> <p style="margin:0 0 12px; ************;">The role also encompasses comprehensive testing and documentation management:</p> <ul style="margin:0 0 0 24px; padding-inline-start:0; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Witnessing and inspecting pressure testing, flushing, hydrostatic testing, flow testing, alarm testing, and functional testing.</li> <li style="margin:0 0 6px;">Supporting Integrated Systems Testing (IST) and verification of FLS system interfaces and cause-and-effect sequences.</li> <li style="margin:0 0 6px;">Reviewing testing and commissioning procedures and results, and verifying calibration certificates for testing equipment.</li> <li style="margin:0 0 6px;">Raising Inspection Requests (IRs), Site Inspection Reports, Quality Observations, and Non-Conformance Reports (NCRs), and coordinating corrective actions.</li> <li style="margin:0 0 6px;">Monitoring the closure of FLS-related NCRs, punch-list items, and inspection findings.</li> <li style="margin:0 0 6px;">Reviewing contractor and specialist vendor technical submittals for project compliance.</li> <li style="margin:0 0 6px;">Supporting authority inspections and approvals, including coordination with Saudi Civil Defense and other relevant authorities.</li> <li style="margin:0 0 6px;">Reviewing and verifying FLS system documentation, commissioning records, test certificates, and maintenance documentation prior to final acceptance and handover.</li> <li style="margin:0 0 6px;">Supporting the preparation of FLS handover dossiers, O&amp;M manuals, and final acceptance documentation.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Qualifications and Experience</h3> <p style="margin:0 0 12px; ************;">Candidates should possess the following qualifications and experience:</p> <ul style="margin:0 0 0 24px; padding-inline-start:0; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;"><strong style="font-weight:700;">Education:</strong> Bachelor’s degree in Fire Protection Engineering, Mechanical Engineering, Electrical Engineering, or a related discipline.</li> <li style="margin:0 0 6px;"><strong style="font-weight:700;">Experience:</strong> 5-10 years of relevant experience in Fire &amp; Life Safety engineering, inspection, testing, or commissioning.</li> <li style="margin:0 0 6px;"><strong style="font-weight:700;">Project Background:</strong> Proven experience on major airport, infrastructure, commercial, industrial, or large-scale building projects.</li> <li style="margin:0 0 6px;"><strong style="font-weight:700;">Technical Knowledge:</strong> Strong knowledge of fire protection and life safety systems.</li> <li style="margin:0 0 6px;"><strong style="font-weight:700;">Collaboration:</strong> Experience working with specialist fire protection contractors, consultants, vendors, and authorities.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Preferred Certifications and Skills</h3> <p style="margin:0 0 12px; ************;">The following qualifications and experiences are highly preferred:</p> <ul style="margin:0 0 0 24px; padding-inline-start:0; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Airport or aviation project experience.</li> <li style="margin:0 0 6px;">NFPA certifications or training.</li> <li style="margin:0 0 6px;">Certified Fire Protection Specialist (CFPS) certification.</li> <li style="margin:0 0 6px;">NICET certification.</li> <li style="margin:0 0 6px;">Civil Defense-approved or recognized fire safety qualifications.</li> <li style="margin:0 0 6px;">NEBOSH, IOSH, or relevant HSE certification.</li> <li style="margin:0 0 6px;">Relevant testing and commissioning certification.</li> </ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Parsons are looking for a seasoned Senior Project Manager: Station (MEP) to join their team! The Senior Project Manager: Station MEP (PMC) is a senior, client facing role responsible for managing the end to end design and build process of station MEP works on major rail/transit or complex infrastructure projects. This is a non operational position focused on project and design management, technical assurance, and contractor oversight on behalf of the client, ensuring that all MEP systems for stations (and associated ancillary buildings) are delivered safely, on time, within budget, and in full compliance with the employer s requirements, codes, and standards. The role requires approximately 15 years of experience in building or rail MEP (mechanical, electrical, public health, fire &amp; life safety, ELV systems), including substantial experience in design management and construction supervision, ideally within a PMC, consulting engineer, or client organization.</p><p>What You'll Be Doing;</p><ul><li>Act as the primary PMC point of contact for all station MEP matters, representing the client in meetings with designers, contractors, authorities, and other stakeholders.</li><li>Ensure that the employer s requirements, contracts, and design briefs for station MEP systems are clearly communicated, understood, and implemented.</li><li>Provide independent, objective advice and recommendations to the client on technical, program, commercial, and risk issues related to station MEP works.</li><li>Manage and oversee the full MEP design lifecycle for stations: concept, schematic, detailed design, and IFC stages.</li><li>Review and comment on design submissions, drawings, calculations, models, and specifications for HVAC, power distribution, lighting, fire protection, plumbing and drainage, vertical transportation, ELV/BMS, and life safety systems.</li><li>Ensure design compliance with employer s requirements, project technical standards, local codes, international standards, fire and life safety regulations, and authority requirements.</li><li>Chair and coordinate design review meetings, value engineering and constructability workshops, and multi discipline coordination sessions (architecture, structure, rail systems, civil).</li><li>Oversee requirements management and traceability, design verification and validation, and close out of design review comments.</li><li>Ensure interfaces between MEP, architecture, structure, rail systems, and station operations are identified and resolved at design stage.</li><li>Support the preparation and review of technical sections of tender documents, scopes of work, and employer s requirements for station MEP packages.</li><li>Review and evaluate technical proposals, clarifications, and deviations from contractors and suppliers; provide recommendations to the client for award.</li><li>Assist in contract negotiations and post award technical clarifications with MEP contractors and key vendors.</li><li>From a PMC perspective, oversee and manage construction and installation activities for station MEP systems, ensuring alignment with approved designs, specifications, and quality standards.</li><li>Monitor contractor construction methodologies, sequencing, and resource planning for MEP works; challenge and improve where needed.</li><li>Coordinate resolution of site technical issues and RFIs in collaboration with design consultants and contractors.</li><li>Track and manage MEP interfaces with civil works, finishes, systems integration, and other trades to avoid clashes and rework.</li><li>Monitor compliance with project HSE requirements during MEP construction activities, and support the client s HSE objectives.</li><li>Review and approve, on behalf of the client, testing and commissioning strategies, plans, procedures, and integrated test schedules for station MEP systems.</li><li>Monitor execution of pre commissioning, functional performance tests, integrated systems testing, and life safety commissioning through reports and selective site attendance.</li><li>Review test results, non conformance reports, and snag lists; ensure timely rectification and closure by contractors.</li><li>Coordinate with operations, maintenance, and systems teams to ensure that MEP systems meet handover, operability, maintainability, and life cycle requirements.</li><li>Oversee completion and quality of as built documentation, O&amp;M manuals, training materials, and handover deliverables.</li><li>Manage and track station MEP design and construction activities against the approved master schedule and key milestones.</li><li>Identify critical path activities and dependencies affecting MEP delivery; initiate recovery plans where schedule slippage occurs.</li><li>Monitor MEP related costs, variations, and potential claims; support the client in negotiation and resolution.</li><li>Maintain and regularly update risk registers for station MEP works, identifying mitigation measures and contingency plans.</li><li>Provide accurate, timely progress reports, dashboards, and presentations for the client s senior management and governance committees.</li><li>Coordinate with client internal departments (Operations, Maintenance, Safety, Security, IT, Commercial, etc.) to ensure MEP designs and installations meet operational and business requirements.</li><li>Interface with local authorities (e.g., civil defense, utility providers, building control) to support timely approvals, NOCs, inspections, and permits.</li><li>Facilitate coordination between multiple design consultants, contractors, systems integrators, and third parties involved in station delivery.</li><li>Lead and mentor a team of station MEP engineers and specialists working within the PMC team.</li><li>Promote a culture of quality, safety, and proactive risk management across all MEP related activities.</li><li>Ensure that robust quality assurance/quality control (QA/QC) processes are applied to MEP design and construction deliverables.</li><li>Support knowledge transfer, continuous improvement, and lessons learned across the program.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>What Required Skills You'll Bring;</p><ul><li>Bachelor s degree in Mechanical, Electrical, Building Services, or related Engineering discipline.</li><li>Master s degree in Engineering, Project Management, or related field is an advantage.</li><li>Professional engineering registration or chartership (CEng, PE) is highly desirable.</li><li>Project management certification ( PMP, PRINCE2) is an advantage.</li><li>Minimum 15 years experience in MEP engineering for major buildings (early career) AND rail/transit stations (current &amp; essential), with substantial design and site supervision exposure.</li><li>Significant experience working within a PMC, client organization, or international consultancy on large, multi discipline infrastructure or transportation projects.</li><li>Demonstrated track record managing station or complex building MEP packages from design through testing and commissioning.</li><li>Strong experience coordinating multi discipline designs and managing contractors and vendors.</li><li>Prior experience on rail/metro stations or other complex, public use facilities (airports, hospitals, large commercial developments) is highly advantageous.</li><li>Deep technical understanding of station MEP systems: HVAC, power distribution, emergency power, lighting, public health, fire protection, fire alarm, BMS/SCADA, ELV systems, and life safety strategies.</li><li>Strong knowledge of relevant local codes, international standards, and fire and life safety regulations.</li><li>Proven ability to manage complex design and construction processes, with strong planning and organizational skills.</li><li>Excellent stakeholder management, communication, and negotiation skills in a multi cultural, multi discipline environment.</li><li>Strong analytical, problem solving, and decision making capabilities, with a focus on risk and issue management.</li><li>High level of professionalism, integrity, and client service orientation.</li><li>Proficiency with standard project management and office tools; familiarity with BIM/ Revit and common CDE/document control systems is an advantage.</li><li>Fluency in English (written and spoken); Arabic is ideal</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>WSP</span> <span>is</span> <span>seeking</span> <span>an</span> <span>experienced</span> <span>Mechanical</span> <span>Inspector</span> <span>to</span> <span>join</span> <span>our</span> <span>Construction</span> <span>Supervision</span> <span>team</span> <span>for</span> <span>a</span> <span>major</span> <span>infrastructure</span> <span>development</span> <span>project</span> <span>at</span> <span>King</span> <span>Abdullah</span> <span>Economic</span> <span>City</span> <span>(KAEC)</span><span>,</span> <span>supporting</span> <span>the</span> <span>delivery</span> <span>of</span> <span>roads,</span> <span>utilities,</span> <span>and</span> <span>industrial</span> <span>infrastructure</span> <span>works.</span> <span>The</span> <span>role</span> <span>will</span> <span>oversee</span> <span>the</span> <span>inspection</span> <span>of</span> <span>mechanical</span> <span>infrastructure</span> <span>installations,</span> <span>ensuring</span> <span>compliance</span> <span>with</span> <span>project</span> <span>specifications,</span> <span>approved</span> <span>drawings,</span> <span>quality</span> <span>standards,</span> <span>and</span> <span>safety</span> <span>requirements.</span><br><br>Responsibilities:<br>As a Mechanical Inspector, you will play a key role in monitoring and inspecting construction activities related to water networks, firefighting systems, <span>irrigation</span> <span>systems,</span> <span>sewerage</span> <span>and</span> <span>stormwater</span> <span>infrastructure.</span> <span>Working</span> <span>closely</span> <span>with</span> <span>the</span> <span>Resident</span> <span>Engineer</span> <span>and</span> <span>project</span> <span>team,</span> <span>you</span> <span>will</span> <span>help</span> <span>ensure</span> <span>that</span> <span>all</span> <span>construction</span> <span>works</span> <span>are</span> <span>delivered</span> <span>to</span> <span>the</span> <span>highest</span> <span>standards</span> <span>of</span> <span>quality,</span> <span>safety,</span> <span>and</span> <span>technical</span> <span>compliance.</span><br><ul><li>Inspect and monitor mechanical infrastructure works to ensure compliance with approved drawings, specifications, and contract requirements.</li><li>Supervise installation activities related to potable water networks, firefighting systems, irrigation systems, sewerage networks, and stormwater infrastructure.<span>[KAEC | PowerPoint]</span></li><li>Review and verify materials delivered to site and ensure they meet project specifications and approvals.</li><li>Witness testing, flushing, pressure testing, commissioning, and handover activities.</li><li>Identify non-conforming works and assist in tracking corrective actions to closure.</li><li>Maintain detailed inspection records and prepare daily, weekly, and monthly reports.</li><li>Coordinate with contractors, engineers, and stakeholders to resolve site-related technical issues.</li><li>Verify compliance with approved method statements, ITPs, and quality procedures.</li><li>Monitor contractor performance and workmanship standards.</li><li>Ensure compliance with project HSE requirements and industry best practices.</li><li>Attend site meetings and contribute to technical discussions related to mechanical works.</li><li>Support the Resident Engineer in achieving project objectives and delivery milestones.</li></ul><br><br>Qualifications:<br><ul><li>Diploma or Bachelor's Degree in Mechanical Engineering or a related discipline.</li><li>Minimum 7 years of experience in construction supervision and inspection of infrastructure projects.</li><li>Proven experience inspecting water supply, firefighting, irrigation, sewerage, and stormwater systems.</li><li>Previous experience working for an engineering consultancy or supervision consultant.</li><li>Strong understanding of international standards, specifications, and construction quality requirements.</li><li>Experience in testing and commissioning of mechanical utility networks.</li><li>Ability to review shop drawings, material submittals, and technical documentation.</li><li>Strong communication, reporting, and coordination skills.</li><li>Proficiency in Microsoft Office applications.</li><li>Previous experience in Saudi Arabia is preferred.</li><li>Fluency in English is essential; Arabic language skills are advantageous.</li></ul>Imagine a better future for us all and a better future for you. Join WSP and be part of a team delivering innovative solutions that make a lasting impact on communities worldwide.<br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Nationality"> <b>Nationality</b> </div> <div class="col is-9 p5" data-automation-id="data_Nationality"> Saudi Arabia </div> </div> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>QA/QC Engineer / Lead We are currently seeking an experienced QA/QC Engineer / Lead to support a major project. We are looking for candidates with a minimum of 7+ years of QA/QC experience , ideally gained within large-scale Oil &amp; Gas, Energy, Industrial or Infrastructure projects . The successful candidate will be responsible for ensuring all project activities meet the required quality standards, client specifications and applicable international codes. Key Responsibilities Develop and implement Project Quality Plans (PQP), Inspection &amp; Test Plans (ITP) and Method Statements . Ensure compliance with company, client and project QA/QC procedures and specifications . Perform and coordinate quality inspections across civil, mechanical, electrical and instrumentation works , as applicable. Coordinate laboratory and field testing for materials, concrete, welding, coatings and other project activities . Witness inspections and verify works against approved ITPs, drawings, specifications and standards . Raise, manage and close Non-Conformance Reports (NCRs) . Lead Root Cause Analysis (RCA) and implement Corrective and Preventive Actions (CAPA). Conduct internal and external quality audits . Maintain material traceability, inspection records, quality documentation and reporting. Prepare daily, weekly and monthly QA/QC reports and quality dashboards . Coordinate closely with Construction, HSE and Project Management teams . Liaise directly with client QA/QC representatives regarding inspections, documentation and approvals.</p><p><strong>Desired Candidate Profile</strong></p><p>Requirements 7+ years experience within QA/QC Engineering or Quality Management. Strong experience developing and working with PQP, ITPs, Method Statements, NCRs and quality documentation . Previous experience conducting inspections, audits and quality reporting. Good knowledge of relevant international standards, including: ISO 9001:2015 ISO 14001:2015 ISO 45001:2018 ASTM, ACI, BS, API and ASME , depending on discipline. Experience working to Royal Commission / RCRC standards would be highly advantageous. Strong understanding of RCA, CAPA and NCR close-out processes . Excellent communication skills with the ability to interface directly with clients and multidisciplinary project teams. We are particularly interested in experienced QA/QC professionals who have worked on major EPC, Oil &amp; Gas, Energy or Infrastructure projects and are comfortable taking ownership of quality activities throughout the project lifecycle.</p>

<ul><li><p>Maintain relationship with existing & new clients.</p></li><li><p>Prepare, maintain company written practice, all NDT and PWHT procedures, project specification procedures in accordance with current edition of ASME, AWS, API, EEMUA, BS, EN, ISO codes and standards.</p></li><li><p>Preparation of ASME audits, NDT procedures, demonstration of the same, making demo records, review of radiographs, participations at pre-audit and final audits at ASME shops around UAE.</p></li><li><p>ASNT Level III witnessing of NDT, reports review and film review for ASME, AWS and API jobs.</p></li><li><p>Provide training & certification of (Level I/ Level II) NDT Technicians as per code requirements.</p></li><li><p>Maintain and review technician qualification files & records.</p></li><li><p>Overseeing all non-destructive testing (NDT) operations within the company.</p></li><li><p>Developing and implementing NDT procedures and protocols to ensure compliance with industry standards and regulations.</p></li><li><p>NDT Level III services- ASME Code stamped fabrication companies all over Saudi Arabia, UAE and Middle Eastern regions.</p></li><li><p>Ensure effective implementation of ISO & OHSAS standards and advise throughout the organization for proper compliance.</p></li><li><p>Supervising NDT Level III training and certification.</p></li><li><p>Interactions with all clients regarding all technician issues, complaints etc.</p></li><li><p>API-510, 653, 570 inspection services.</p></li><li><p>CSWIP welding inspection services.</p></li><li><p>BGAS Painting Inspections.</p></li><li><p>Prepare, maintain company written practice, all NDT and PWHT procedures, project specific procedures in accordance with current edition of ASME, AWS, API EEMUA, BS, EN, ISO codes and standards.</p></li><li><p>Preparations of ASME Audits, NDT procedures & demonstration of the same, preparing demo records, review of radiographs, participation at pre-audits and final audits at the ASME shops with ASME team leaders around Middle Eastern region.</p></li><li><p>Managing a team of NDT technicians and providing leadership, guidance, and training as needed.</p></li><li><p>Coordinating with other departments to integrate NDT processes into overall quality assurance and production workflows.</p></li><li><p>Conducting internal audit with team, preparing to get new accreditations for the company.</p></li><li><p>Assisting business development with project requirements, and technical, budgets, binding.</p></li><li><p>Preparing all the documents for Audit, attending audit with auditors, assisting inspector’s demonstration answering auditors’ questions.</p></li><li><p>Conducting regular inspections and audits to ensure the integrity and reliability of NDT equipment and processes.</p></li><li><p>Technical Support: Provide technical support to project teams, including interpretation of NDT codes, standards, and specifications.</p></li><li><p>Training and Development: Facilitate training sessions for NDT technicians and inspectors.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor’s degree in Engineering (Mechanical, Metallurgy, Materials, or equivalent).</li><li>ASNT / PCN / EN ISO 9712 NDT Level III certification in major methods (RT, UT, MT, PT, VT) – additional methods like PAUT, TOFD, ET are an advantage.</li><li>Additional certification in welding inspection (CSWIP 3.1/3.2, AWS CWI, or equivalent) is desirable.</li><li>Knowledge of international codes and standards (ASME, API, ASTM, ISO, AWS, EN, etc.).</li></ul><h3><strong>Experience</strong></h3><ul><li>Minimum <strong>10–15 years of professional experience</strong> in Non-Destructive Testing, with at least <strong>5+ years in a supervisory/technical management role</strong>.</li><li>Proven track record in developing and qualifying NDT procedures, techniques, and personnel.</li><li>Strong experience in <strong>oil & gas, power plants, fabrication yards, and in-service inspection</strong>.</li><li>Hands-on knowledge of advanced NDT (PAUT, TOFD, Digital RT, Eddy Current, etc.) is highly preferred.</li><li>Experience in audits, quality management systems (ISO 9001/17020/17025), and accreditation processes.</li></ul><h3><strong>Technical Skills</strong></h3><ul><li>Development, review, and approval of NDT procedures and techniques.</li><li>Interpretation of inspection results and issuing of technical reports.</li><li>Oversight of <strong>RBI (Risk-Based Inspection)</strong>, fitness-for-service assessments, and corrosion monitoring.</li><li>Knowledge of inspection software, data analysis tools, and digital NDT applications.</li><li>Strong troubleshooting, problem-solving, and decision-making ability in complex inspection scenarios.</li></ul><h3><strong>Management & Leadership</strong></h3><ul><li>Lead and mentor NDT Level I/II inspectors, ensuring compliance with procedures and standards.</li><li>Manage technical operations of the NDT department, including resource allocation, budgeting, and planning.</li><li>Provide technical support to clients and coordinate with third-party inspection agencies.</li><li>Conduct internal/external training, qualification, and certification of NDT personnel.</li><li>Liaise with clients on technical issues, bids, tenders, and project requirements.</li></ul><h3><strong>Other Requirements</strong></h3><ul><li>Strong communication and report-writing skills in English (Arabic/other languages is an advantage).</li><li>Excellent organizational and time management skills.</li><li>Willingness to travel to sites, fabrication yards, or shutdowns when required.</li><li>Strong commitment to <strong>HSE (Health, Safety, and Environment)</strong> standards.</li></ul>

<ul><li><p>Maintain relationship with existing & new clients.</p></li><li><p>Prepare, maintain company written practice, all NDT and PWHT procedures, project specification procedures in accordance with current edition of ASME, AWS, API, EEMUA, BS, EN, ISO codes and standards.</p></li><li><p>Preparation of ASME audits, NDT procedures, demonstration of the same, making demo records, review of radiographs, participations at pre-audit and final audits at ASME shops around UAE.</p></li><li><p>ASNT Level III witnessing of NDT, reports review and film review for ASME, AWS and API jobs.</p></li><li><p>Provide training & certification of (Level I/ Level II) NDT Technicians as per code requirements.</p></li><li><p>Maintain and review technician qualification files & records.</p></li><li><p>Overseeing all non-destructive testing (NDT) operations within the company.</p></li><li><p>Developing and implementing NDT procedures and protocols to ensure compliance with industry standards and regulations.</p></li><li><p>NDT Level III services- ASME Code stamped fabrication companies all over Saudi Arabia, UAE and Middle Eastern regions.</p></li><li><p>Ensure effective implementation of ISO & OHSAS standards and advise throughout the organization for proper compliance.</p></li><li><p>Supervising NDT Level III training and certification.</p></li><li><p>Interactions with all clients regarding all technician issues, complaints etc.</p></li><li><p>API-510, 653, 570 inspection services.</p></li><li><p>CSWIP welding inspection services.</p></li><li><p>BGAS Painting Inspections.</p></li><li><p>Prepare, maintain company written practice, all NDT and PWHT procedures, project specific procedures in accordance with current edition of ASME, AWS, API EEMUA, BS, EN, ISO codes and standards.</p></li><li><p>Preparations of ASME Audits, NDT procedures & demonstration of the same, preparing demo records, review of radiographs, participation at pre-audits and final audits at the ASME shops with ASME team leaders around Middle Eastern region.</p></li><li><p>Managing a team of NDT technicians and providing leadership, guidance, and training as needed.</p></li><li><p>Coordinating with other departments to integrate NDT processes into overall quality assurance and production workflows.</p></li><li><p>Conducting internal audit with team, preparing to get new accreditations for the company.</p></li><li><p>Assisting business development with project requirements, and technical, budgets, binding.</p></li><li><p>Preparing all the documents for Audit, attending audit with auditors, assisting inspector’s demonstration answering auditors’ questions.</p></li><li><p>Conducting regular inspections and audits to ensure the integrity and reliability of NDT equipment and processes.</p></li><li><p>Technical Support: Provide technical support to project teams, including interpretation of NDT codes, standards, and specifications.</p></li><li><p>Training and Development: Facilitate training sessions for NDT technicians and inspectors.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor’s degree in Engineering (Mechanical, Metallurgy, Materials, or equivalent).</li><li>ASNT / PCN / EN ISO 9712 NDT Level III certification in major methods (RT, UT, MT, PT, VT) – additional methods like PAUT, TOFD, ET are an advantage.</li><li>Additional certification in welding inspection (CSWIP 3.1/3.2, AWS CWI, or equivalent) is desirable.</li><li>Knowledge of international codes and standards (ASME, API, ASTM, ISO, AWS, EN, etc.).</li></ul><h3><strong>Experience</strong></h3><ul><li>Minimum <strong>10–15 years of professional experience</strong> in Non-Destructive Testing, with at least <strong>5+ years in a supervisory/technical management role</strong>.</li><li>Proven track record in developing and qualifying NDT procedures, techniques, and personnel.</li><li>Strong experience in <strong>oil & gas, power plants, fabrication yards, and in-service inspection</strong>.</li><li>Hands-on knowledge of advanced NDT (PAUT, TOFD, Digital RT, Eddy Current, etc.) is highly preferred.</li><li>Experience in audits, quality management systems (ISO 9001/17020/17025), and accreditation processes.</li></ul><h3><strong>Technical Skills</strong></h3><ul><li>Development, review, and approval of NDT procedures and techniques.</li><li>Interpretation of inspection results and issuing of technical reports.</li><li>Oversight of <strong>RBI (Risk-Based Inspection)</strong>, fitness-for-service assessments, and corrosion monitoring.</li><li>Knowledge of inspection software, data analysis tools, and digital NDT applications.</li><li>Strong troubleshooting, problem-solving, and decision-making ability in complex inspection scenarios.</li></ul><h3><strong>Management & Leadership</strong></h3><ul><li>Lead and mentor NDT Level I/II inspectors, ensuring compliance with procedures and standards.</li><li>Manage technical operations of the NDT department, including resource allocation, budgeting, and planning.</li><li>Provide technical support to clients and coordinate with third-party inspection agencies.</li><li>Conduct internal/external training, qualification, and certification of NDT personnel.</li><li>Liaise with clients on technical issues, bids, tenders, and project requirements.</li></ul><h3><strong>Other Requirements</strong></h3><ul><li>Strong communication and report-writing skills in English (Arabic/other languages is an advantage).</li><li>Excellent organizational and time management skills.</li><li>Willingness to travel to sites, fabrication yards, or shutdowns when required.</li><li>Strong commitment to <strong>HSE (Health, Safety, and Environment)</strong> standards.</li></ul>

About the Role:The Mechanical Site Inspector plays a crucial role in ensuring that mechanical installations and systems are executed according to the project specifications and standards. This position requires a keen eye for detail and a strong understanding of mechanical engineering principles. The inspector will be responsible for monitoring the installation process, conducting inspections, and ensuring compliance with safety regulations and quality standards. The ideal candidate will possess a blend of technical expertise and practical experience in the field, enabling them to effectively communicate with contractors and project managers.<br>What you will be doing:Monitor the installation of mechanical systems, including HVAC, plumbing, and fire protection systems. Conduct regular site inspections to ensure compliance with mechanical specifications and standards. Prepare detailed inspection reports and documentation of findings for project stakeholders. Provide technical guidance and support to construction teams as needed. Stay updated on industry trends and advancements in mechanical engineering practices. Review and interpret mechanical drawings and specifications to verify accuracy and completeness. Supervise and manage the processes related to the site work preparation, execution, verification, and validation of Contractor’s submissions, site works and effective implementation. Required Experience:3 years of experience in mechanical site field. Worked with reputable Consultant Engineering Firms needed. Full knowledge of Statutory Authorities requirements. Education:Bachelor's degree or Diploma in Mechanical Engineering field. Certifications & Memberships:Saudi Council of Engineers (SSE) Membership or any local engineer's society membership, i.e. CRPEP (for Bahrain). Essential Skills:Supervise site works and effective execution. Executes the specific inspections on materials, equipment and construction/installation activities on site. Strong analytical and problem-solving skills. Excellent communication and interpersonal abilities.

<h3>About the Role</h3><p>JIGPC- Jazan Integrated Gasification and Power Company is seeking a <strong>T&amp;I Engineer Maintenance</strong> to join its Maintenance team in Jazan. This full-time role is responsible for the planning, coordination, and execution of Turnaround &amp; Inspection (T&amp;I) activities. The primary objective is to ensure safe, timely, and cost-effective plant outages while contributing to enhanced reliability, compliance, and operational excellence within the facility.</p><h3>Key Responsibilities</h3><ul><li>Lead end-to-end planning and execution for turnaround and inspection activities.</li><li>Develop detailed outage schedules, work scopes, and execution plans.</li><li>Ensure all inspection activities comply with regulatory, safety, and company standards.</li><li>Maintain turnaround risk registers and implement proactive measures to mitigate operational risks.</li><li>Monitor turnaround expenditures and identify opportunities for cost optimization.</li><li>Coordinate contractors, suppliers, materials, equipment, and site resources.</li><li>Oversee pre-shutdown and pre-fabrication activities to ensure readiness.</li><li>Prepare post-turnaround reports and maintain accurate maintenance records.</li><li>Promote continuous improvement in turnaround and inspection methodologies.</li></ul><h3>Experience Required</h3><p>Candidates should possess 5 to 10 years of experience as a Turnaround &amp; Inspection professional, preferably within advanced energy or industrial facilities.</p><h3>The Company</h3><p>JIGPC- Jazan Integrated Gasification and Power Company operates one of the region's advanced energy and industrial facilities. The company focuses on gasification and power generation, contributing to critical plant reliability and operational excellence initiatives.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking an experienced Electrical Inspector with strong expertise in Electrical Systems, ELV (Extra Low Voltage), and ICT Infrastructure to support the Program Management and Construction Management (PMCM) team on the prestigious project in Riyadh.</p><br><p>The successful candidate will be responsible for inspecting, monitoring, and ensuring that all electrical, ELV, and ICT installation works are executed in compliance with project specifications, applicable codes, quality standards, and approved construction drawings.</p><br><br><br>Responsibilities:<br><ul><li>Conduct site inspections for electrical, ELV, and ICT works to ensure compliance with approved drawings, specifications, and project requirements.</li><li>Monitor installation and testing activities related to:<ul><li>Power distribution systems</li><li>Lighting systems</li><li>Earthing and lightning protection systems</li><li>Structured cabling systems</li><li>Data and communication networks</li><li>CCTV systems</li><li>Access control systems</li><li>Public Address (PA) systems</li><li>Audio Visual (AV) systems</li><li>Building Management Systems (BMS)</li><li>Fire Alarm and Security Systems</li></ul></li><li>Review contractor inspection requests (IRs), material submittals, shop drawings, and method statements.</li><li>Verify quality of workmanship and ensure adherence to project quality standards.</li><li>Identify deficiencies, issue non-conformance reports (NCRs), and monitor corrective actions.</li><li>Witness testing and commissioning activities and maintain inspection records.</li><li>Coordinate with contractors, consultants, and project stakeholders to resolve technical issues.</li><li>Ensure compliance with relevant Saudi regulations, international codes, health, safety, and environmental requirements.</li><li>Prepare daily, weekly, and monthly inspection reports.</li></ul><br><br>Qualifications:<br><ul><li>Bachelor's Degree or Diploma in Electrical Engineering or a related discipline.</li><li>Minimum 8–10 years of experience in electrical inspection, with significant exposure to ELV and ICT systems.</li><li>Experience working on large-scale infrastructure, mixed-use, commercial, hospitality, or mega projects.</li><li>Prior experience in a PMCM/Consultancy environment is highly preferred.</li><li>Strong knowledge of international standards, including IEC, NFPA, IEEE, TIA/EIA, and relevant Saudi regulations.</li><li>Excellent communication and reporting skills.</li><li>Proficient in reading and interpreting construction drawings and technical specifications.</li></ul><strong>Candidates who are currently available in Saudi Arabia and can join immediately or within a short notice period will be given preference.</strong><br><p><span>Imagine a better future for you and a better future for us all.</span></p><br><p><span>Join our close-knit community of talented individuals who share your passion for making a positive impact. Our global team includes more than 69,000 employees, working together to make a difference in communities both close to home and around the world.</span></p><br><p><span>With us, you can. Apply today.</span></p><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Job Responsibilities:</strong><br>• Carry-out condition-based monitoring activities (coordination and data collection), such as vibration analysis, thermography, and ultrasound analysis to detect early failures, in all plants.<br>• Provide diagnoses based on analysis of CBM data collection, for common patterns.<br>• Document failure modes on site.<br>• Collect physical evidence (photos, measurements, parts condition).<br>• Support RCA investigations.<br>• Validate abnormal trends before escalation.<br>• Confirm condition monitoring alerts.<br>• Support shutdown reliability assessments.<br>• Ensure measurement points are correctly recorded in SAP-PM.<br>• Maintain historical reliability logs.<br>• Support Weibull data collection.<br>▪Prepare condition-based monitoring activities reports.<br>• Support Reliability Engineers in preparing weekly, monthly and annual reports.<br>▪Support Reliability Engineers in conducting annual audit in all plants, using the Reliability assessment grid.<br>• Support Reliability Engineers in conducting work quality audits during shutdowns.<br>▪Support Reliability Engineers in the budget preparation with technical information and analyses.<br><br><strong>Required Qualifications:</strong><br>-Vocational/Technical Certificate, Diploma, or Bachelor's Degree in Electrical Engineering, Electrical Maintenance, Industrial Electrical Systems, Instrumentation, Electronics, or a related discipline.<br><strong>Preferred Experience:</strong><br>-Vocational/Technical Certificate: Minimum 7 years of electrical maintenance experience in steel industry or heavy industry operations.<br>-Diploma: Minimum 5 years of electrical maintenance experience in steel industry or heavy industry operations.<br>-Bachelor's Degree: Minimum 3 years of electrical maintenance experience in steel industry or heavy industry operations.<br><strong>Relevant Experience may include:</strong><br>-Experience performing condition monitoring, equipment inspection, and equipment condition assessment activities in steel plants or similar heavy industrial environments.<br>-Prior experience guiding technicians in steel plants, rolling mills, or similar continuous process industries.<br>-Prior experience supporting reliability improvement activities, equipment diagnostics, and maintenance teams in continuous process industries.<br><strong>Job-Specific Skills:</strong><br>-Ability to support condition monitoring and reliability assessment activities.<br>-Ability to support inspection, condition assessment, and troubleshooting of electrical equipment.<br>-Ability to perform and interpret condition monitoring activities including vibration monitoring, thermography, ultrasound inspection, and other diagnostic techniques.<br>-Ability to identify equipment abnormalities, performance deviations, and potential failure indicators, and support corrective actions.<br>-Ability to coordinate and guide technicians during reliability inspections, condition monitoring activities, and field data collection.<br>-Ability to verify inspection quality, measurement accuracy, and compliance with reliability and maintenance standards.<br>-Effective communication and coordination with Reliability Engineers, Maintenance Supervisors, Technicians, and cross-functional teams.<br>-Ability to support maintenance teams during breakdowns, shutdowns, equipment assessments, and reliability improvement activities.<br>-Strong adherence to Safety Standards, SOPs, Lockout/Tagout (LOTO), and emergency procedures.<br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 1+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>Support the implementation, monitoring, and continuous improvement of the Project Quality Management System across the Airport / Infrastructure / Airfield project. The role will provide specialist quality support to Engineering, Construction, Procurement, Commissioning, and Project Management teams, ensuring that project activities and deliverables comply with approved quality requirements, contractual obligations, specifications, standards, and Client expectations.</p><p>What You'll Be Doing:</p><ul><li>Support the implementation and maintenance of the Project Quality Management System (QMS).</li><li>Monitor compliance with the Project Quality Plan, quality procedures, specifications, standards, and contractual requirements.</li><li>Provide specialist quality support to Engineering, Construction, Procurement, Commissioning, and Project Management teams.</li><li>Review project quality procedures, Inspection and Test Plans (ITPs), Method Statements, checklists, and quality-related documentation.</li><li>Ensure quality requirements are clearly defined and incorporated into project execution plans and work packages.</li><li>Conduct quality surveillance and compliance inspections across project activities.</li><li>Monitor implementation of approved quality procedures by contractors, subcontractors, consultants, and suppliers.</li><li>Review and verify inspection and testing requirements for project works.</li><li>Monitor quality records, inspection reports, test results, material approvals, and other quality documentation.</li><li>Identify quality risks, trends, recurring deficiencies, and potential non-conformances.</li><li>Support the development and implementation of corrective and preventive actions.</li><li>Review Non-Conformance Reports (NCRs), observations, deficiencies, and quality concerns and monitor their timely closure.</li><li>Perform root cause analysis for significant or recurring quality issues.</li><li>Support the implementation of corrective and preventive action plans.</li><li>Conduct internal quality audits and support external and Client audits.</li><li>Prepare audit plans, audit reports, findings, observations, and follow-up actions.</li><li>Monitor closure of audit findings and verify effectiveness of corrective actions.</li><li>Review contractor and subcontractor Quality Management Systems and quality plans.</li><li>Participate in prequalification and quality capability assessments of contractors, suppliers, and subcontractors.</li><li>Review quality-related technical submissions, procedures, and project documentation.</li><li>Coordinate with Document Control to ensure quality records are properly controlled, traceable, and maintained.</li><li>Monitor quality performance indicators and prepare quality reports and dashboards.</li><li>Analyze project quality data to identify trends and opportunities for improvement.</li><li>Provide regular quality performance updates to the Project Quality Manager and Project Management.</li><li>Support quality awareness, training, workshops, and toolbox sessions.</li><li>Promote a proactive quality culture across the project.</li><li>Support investigation of quality incidents, failures, and major deficiencies.</li><li>Participate in technical and quality review meetings with Client, Consultant, Contractors, and project stakeholders.</li><li>Ensure lessons learned are captured and incorporated into project quality processes.</li><li>Support project handover and closeout by ensuring quality dossiers and records are complete and compliant.</li></ul><p>Engineering &amp; Design Quality Responsibilities</p><ul><li>Review engineering deliverables for compliance with approved quality requirements and project procedures.</li><li>Monitor implementation of design quality control and checking processes.</li><li>Support audits of Lead Design Consultants and specialist design consultants.</li><li>Monitor design review, checking, verification, and approval processes.</li><li>Track design-related quality comments, observations, and corrective actions.</li><li>Verify that design changes are appropriately reviewed, documented, and controlled.</li><li>Support multidisciplinary design quality reviews and technical audits.</li><li>Monitor compliance of engineering deliverables with applicable codes, standards, Client requirements, and approved design criteria.</li><li>Support resolution of recurring design quality issues and identify opportunities for process improvement.</li></ul><p>Construction Quality Responsibilities</p><ul><li>Monitor implementation of construction quality requirements across site activities.</li><li>Conduct surveillance inspections of critical construction activities.</li><li>Review ITPs, Method Statements, WIRs, MIRs, testing records, and quality documentation.</li><li>Verify that required inspections and tests are completed before subsequent construction activities proceed.</li><li>Monitor material quality, testing, traceability, storage, and compliance.</li><li>Support investigation of construction defects and recurring quality issues.</li><li>Monitor NCR trends and contractor performance.</li><li>Coordinate with Construction and QA/QC teams to ensure timely resolution of quality issues.</li></ul><p>Airport / Infrastructure &amp; Airfield Responsibilities</p><ul><li>Support quality management across airport terminals, airfield infrastructure, runways, taxiways, aprons, roads, utilities, district cooling, and associated infrastructure works.</li><li>Monitor quality requirements associated with critical airport and airfield systems.</li><li>Support audits and surveillance activities for specialist aviation and infrastructure works.</li><li>Ensure quality requirements for airside and landside works are appropriately implemented.</li><li>Support quality assurance during phased construction and complex interface activities.</li><li>Monitor compliance with project-specific airport, aviation, infrastructure, and authority requirements.</li></ul><p>Quality Performance &amp; Reporting</p><ul><li>Develop and maintain quality performance dashboards and reports.</li><li>Monitor key quality indicators, including: NCRs, Observations, Audit Findings, First-Time Pass Rate, Inspection Performance, Test Failures, Rework, Corrective Action Closure, Quality Trends.</li><li>Identify areas of poor quality performance and recommend improvement initiatives.</li><li>Provide data-driven recommendations to Project Quality Management and senior leadership.</li><li>Prepare weekly and monthly quality reports.</li><li>Support management reviews and quality performance presentations.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Degree in Engineering, Quality Management, Construction Management, or a related discipline.</p><p>Minimum of 10 years of relevant experience in project quality management, QA/QC, quality assurance, or quality control.</p><p>Strong experience on major construction, infrastructure, airport, or multidisciplinary projects.</p><p>Proven experience implementing and monitoring Project Quality Management Systems.</p><p>Strong experience with audits, inspections, NCR management, corrective actions, and quality performance monitoring.</p><p>Experience working with Clients, Consultants, Contractors, and specialist subcontractors.</p><p>Strong knowledge of ISO 9001 and quality management principles.</p><p>Experience with engineering and construction quality processes is highly desirable.</p><p>Strong knowledge of quality documentation, ITPs, Method Statements, inspection procedures, and testing requirements.</p><p>Experience on airport / airfield projects is preferred.</p><p>ISO 9001 Lead Auditor or equivalent quality certification is preferred.</p>

SECTION I: Job Summary <br><br>The QC Inspector - Structural performs inspection and testing of structural steel fabrication and erection activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on structural steel fabrication and erection works Witness structural bolting, welding, and alignment checks per the ITP Verify structural steel installation against approved drawings, erection plans, and tolerances Verify materials (structural steel, bolts, coatings) against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for structural works Ensure work fronts comply with approved method statements and structural codes (AISC, etc.) Support preparation of quality documentation for structural handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Structural Steel Inspection Techniques Reading Structural/Erection Drawings Bolting & Welding Inspection Standards (Structural) Inspection & Test Plans (ITPs) Measuring & Alignment Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on structural steel construction projects<br><br>Education<br><br> Diploma or Bachelor's degree in Civil/Structural Engineering QC/inspection certification preferred

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>1. Maintenance and Repair Activities Perform preventive, predictive, corrective, and breakdown maintenance activities on assigned electrical equipment.<br> Carry out routine inspections and identify abnormal conditions such as overheating, unusual noise, vibration, oil leakage, loose connections, damaged cables, and insulation deterioration.<br> Perform cleaning, tightening, lubrication where applicable, replacement of defective parts, cable termination, minor repair work, and equipment restoration activities.<br> Troubleshoot electrical faults, alarms, trips, and abnormal operating conditions to support timely restoration of equipment and minimize plant downtime.<br> Ensure maintenance work is completed in accordance with approved procedures, OEM manuals, drawings, safety requirements, and site standards.<br> Verify the work area is clean, safe, and properly restored after completion of maintenance activities.<br> v Support maintenance, inspection, and repair of electrical equipment including, but not limited to: Medium-voltage and low-voltage switchgear, circuit breakers, motors repaire, contactors, relays, and control panels.<br> Generators, excitation systems, generator auxiliaries, and associated protection systems.<br> Generator Circuit Breakers, Isolated Phase Busbars, Gas-Insulated Bus systems, and associated auxiliary equipment where assigned.<br> Generator transformers, auxiliary transformers, and transformer auxiliary systems.<br> MV and LV motors, motor-operated valves, soft starters, variable frequency drives, and local control stations.<br> UPS systems, battery chargers, battery banks, DC distribution boards, emergency lighting, and diesel generator electrical systems.<br> Cable systems, cable trays, junction boxes, earthing systems, and lightning protection systems.<br> Electrical equipment associated with gas turbines, steam turbines, HRSG systems, water treatment systems, reverse osmosis plants, and balance-of-plant facilities.<br> 2. Testing, Inspection, and Troubleshooting Use approved electrical test instruments, including multimeters, clamp meters, insulation resistance testers, continuity testers, earth resistance testers, and phase rotation meters.<br> Carry out routine electrical testing such as voltage checks, current checks, insulation resistance testing, battery checks, and earth resistance testing.<br> Assist with specialist testing activities such as relay testing, primary injection, secondary injection, breaker timing, contact resistance testing, transformer testing, thermography, and partial discharge testing where applicable.<br> Record all test readings accurately and immediately report abnormal results to the Electrical Maintenance Engineer.<br> Assist in identifying root causes of equipment failures and support corrective actions as directed.<br> Monitor equipment condition and report any developing defects or operational risks.<br> 3. Installation, Commissioning, and Modification Support Assist with installation, commissioning, modification, and upgrading of electrical systems and equipment.<br> Support equipment testing, energization, functional checks, and return-to-service activities.<br> Ensure all installation and modification work complies with technical specifications, approved drawings, and safety requirements.<br> 4. Safety, Permit-to-Work, and Compliance Follow all electrical safety rules, permit-to-work requirements, lockout/tagout procedures, grounding requirements, and arc-flash precautions.<br> Verify that equipment is properly isolated, discharged, grounded, and tested before work starts.<br> Participate in toolbox talks, risk assessments, safety observations, and incident investigations.<br> Immediately report unsafe conditions, damaged tools, electrical hazards, near misses, and incidents.<br> Ensure all maintenance work is performed in compliance with applicable site procedures, OEM requirements, and environmental, health, and safety standards.<br> 5. Documentation and CMMS Support Complete maintenance checklists, inspection sheets, test reports, work completion records, and defect reports accurately.<br> Provide clear work feedback to the Electrical Maintenance Engineer, including work completed, materials used, defects found, and follow-up actions required.<br> Prepare basic reports on maintenance tasks, equipment condition, and identified issues for review by the Electrical Maintenance Engineer.<br> 6. Spare Parts, Tools, and Housekeeping Check the availability of required spare parts, consumables, tools, and test instruments before starting work.<br> Handle, store, and preserve electrical spare parts and materials in accordance with site preservation requirements.<br> Maintain electrical hand tools, power tools, portable test instruments, and workshop equipment in good working condition.<br> Report shortages of spare parts, consumables, and defective tools to the Electrical Maintenance Engineer.<br> Support incoming inspection of electrical materials and spare parts in coordination with the Storekeeper when assigned.<br> 7. Coordination and Teamwork Work closely with Electrical Maintenance Engineers, Operations personnel, Mechanical and I&amp;C teams, contractors, OEM representatives, and other site personnel.<br> Support Operations during equipment isolation, release for maintenance, testing, energization, and return to service.<br> Assist in training junior technicians, and new team members in electrical maintenance practices and safety requirements.<br> Support continuous improvement by identifying recurring defects, maintenance issues, and opportunities to improve equipment reliability.<br> Technical Knowledge Knowledge of electrical systems used in combined cycle power plants.<br> Knowledge of MV and LV switchgear, circuit breakers, transformers, motors, motor control centers, contactors, relays, UPS systems, battery chargers, and DC systems.<br> Understanding of generators, generator auxiliaries, power distribution systems, cable systems, earthing systems, and lighting systems.<br> Familiarity with electrical drawings, single-line diagrams, wiring diagrams, cable schedules, equipment manuals, and maintenance procedures.<br> Understanding of electrical safety requirements, permit-to-work systems, lockout/tagout procedures, grounding, hazardous-energy control, and arc-flash hazards.<br> Awareness of electrical protection devices and their functions.<br> Minimum Qualifications and Experience Education Electrical Diploma, or an equivalent discipline.<br> Electrical trade certification is preferred.<br> Experience Minimum 3 to 5 years of electrical maintenance experience in a power plant, Combined cycle power plant experience is preferred.<br> Personal Attributes Strong commitment to safety, quality, reliability, and compliance.<br> Responsible, disciplined, and able to follow instructions and procedures.<br> Detail-oriented with a proactive approach to identifying equipment defects.<br> Good communication and teamwork skills.<br> Ability to work under pressure and manage multiple assigned tasks.<br> Willingness to work during planned outages, emergency breakdowns, and on-call duties when required.<br> Willingness to work in outdoor and industrial environments.<br> Physical Requirements Physically capable of working in industrial environments.<br> Ability to use appropriate personal protective equipment and follow all site safety requirements.<br> Ability to respond to emergency maintenance requirements as required.<br></span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Salama Engineering Industries is looking for an experienced Quality Assurance Manager to lead the Quality function for our Process Equipment Division (PED) in Dammam. The ideal candidate must have strong hands-on experience in pressure vessel and shell & tube heat exchanger fabrication, with a proven background in Oil & Gas and petrochemical manufacturing. The role will be responsible for ensuring that all engineering, fabrication, welding, inspection, testing and final documentation activities comply with applicable ASME, API, ISO 9001 and customer requirements.<br>Key Responsibilities<br>Lead and manage the QA/QC function for the PED manufacturing and fabrication facility. Develop, implement and maintain the ISO 9001 Quality Management System. Ensure compliance with ASME Section VIII Division 1 & 2, ASME Section IX, ASME Section II, API and applicable TEMA requirements. Oversee quality activities for pressure vessels, shell & tube heat exchangers and other static/process equipment. Review and approve Quality Plans, ITPs, QCPs, inspection procedures, WPS/PQR/WPQ and quality documentation. Ensure quality control from raw material receiving through fabrication, fit-up, welding, NDT, PWHT, hydrotesting, final inspection and dispatch. Ensure compliance of welding and fabrication activities with approved procedures and applicable codes. Coordinate with ASME Authorized Inspectors, third-party inspection agencies, clients and EPC contractors. Manage NCRs, corrective actions, root-cause analysis and preventive actions. Conduct internal, external and customer audits and ensure timely closure of findings. Review MTCs, NDT reports, welding records, inspection reports and final manufacturing/quality dossiers. Establish and monitor quality KPIs, identify recurring quality issues and implement continuous improvement initiatives. Lead and develop the QA/QC team, including QA/QC Engineers, Inspectors and NDT personnel. Support management in maintaining and improving the company's quality standards and customer satisfaction.<br>Mandatory Qualifications & Experience<br>Bachelor's Degree in Mechanical Engineering or equivalent. Minimum 15 years of QA/QC experience in Oil & Gas / Petrochemical fabrication. Mandatory experience in pressure vessel and heat exchanger fabrication. Strong experience with ASME Section VIII Division 1 & 2. Strong knowledge of ASME Section IX, ASME Section II and applicable API/TEMA requirements. Proven experience in welding, NDT, fabrication inspection and pressure testing. Strong knowledge of ISO 9001 Quality Management Systems. ISO 9001 certification – Mandatory. ASQ Certified Manager of Quality/Organizational Excellence (CMQ/OE) – Mandatory. Experience dealing with ASME Authorized Inspectors, third-party inspectors and Oil & Gas clients.

<h3 >About the Role</h3> <p >SNC-Lavalin Fayez Engineering is seeking a <strong >Lead MEP Manager</strong> for a full-time position. This role involves acting as the Consultant's representative on-site, overseeing all Mechanical, Electrical, and Plumbing (MEP) supervision activities for large-scale buildings, mixed-use developments, and theme park projects. The Lead MEP Manager ensures that all MEP works comply with contract requirements, approved designs, quality standards, project schedules, and regulatory mandates.</p> <h3 >Role Context and Objectives</h3> <p >The primary objective of this role is to lead and manage the comprehensive supervision of MEP installations and systems. This includes coordinating with multidisciplinary stakeholders throughout the project lifecycle to ensure seamless integration and execution. The Lead MEP Manager will play a critical role in maintaining project integrity and adherence to technical and quality specifications.</p> <h3 >Key Responsibilities</h3> <ul > <li >Lead site supervision for all MEP works, including HVAC, electrical, plumbing, fire protection, ELV, and specialist systems.</li> <li >Ensure contractor compliance with approved drawings, specifications, method statements, and project standards.</li> <li >Manage and coordinate MEP interfaces with architectural, structural, fit-out, and themed attraction works.</li> <li >Review and provide technical comments on shop drawings, material submittals, RFIs, and design changes.</li> <li >Monitor construction progress and identify potential risks affecting cost, quality, or schedule.</li> <li >Conduct site inspections to ensure works comply with project specifications and applicable codes.</li> <li >Lead testing, commissioning, integrated systems testing, and handover activities.</li> <li >Coordinate with contractors, specialist vendors, ride suppliers, and themed entertainment contractors.</li> <li >Review contractor claims, variation orders, and progress reports.</li> <li >Verify completed works and provide recommendations for payment certifications.</li> <li >Ensure the implementation of QA/QC procedures and HSE requirements across all MEP activities.</li> <li >Attend client, consultant, and contractor meetings, providing technical leadership on project delivery matters.</li> <li >Support the Resident Engineer and Project Director in managing project objectives and resolving technical challenges.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of <strong >5 to 10 years</strong> of relevant experience in MEP supervision for large-scale building, mixed-use, or theme park projects.</li> <li >Demonstrated ability to lead and manage MEP supervision activities effectively.</li> <li >Strong understanding of contract requirements, design specifications, quality standards, and regulatory compliance.</li> </ul> <h3 >Work Type</h3> <p >This is a <strong >full-time</strong> position.</p> <h3 >Application Process</h3> <p >Candidates who meet the outlined qualifications are encouraged to apply.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>1. Mechanical Maintenance and Repair Activities Perform planned preventive, predictive, corrective, and breakdown maintenance activities on assigned mechanical equipment.<br> Carry out daily inspections, running checks, and maintenance checklists in accordance with approved maintenance schedules.<br> Monitor the physical condition of equipment and report abnormalities, non-conformances, and developing defects to the Mechanical Maintenance Engineer.<br> Troubleshoot mechanical failures using approved tools, drawings, manuals, and diagnostic techniques to identify the cause and carry out necessary repairs.<br> Perform dismantling, inspection, cleaning, repair, replacement, reassembly, alignment, and functional testing of mechanical equipment and components.<br> Replace defective parts such as bearings, seals, gaskets, O-rings, gland packing, couplings, bolts, filters, strainers, belts, and lubrication-system components.<br> Perform adjustment, alignment, tightening, lubrication, greasing, oil top-up, oil changing, and cleaning activities in accordance with approved procedures.<br> Identify and report corrosion, cracks, leaks, overheating, vibration, abnormal noise, misalignment, loose bolts, damaged insulation, and other equipment defects.<br> Ensure the working area is clean, safe, and properly restored after completion of maintenance activities.<br> v Support maintenance, inspection, and repair of mechanical equipment including, but not limited to: Siemens 9000HL-Class gas turbine auxiliaries, including lube oil, hydraulic oil, fuel gas, inlet air, ventilation, and turning gear systems.<br> Steam turbine auxiliaries, including lube oil, gland steam, seal oil, condensate, cooling, and turning gear systems.<br> Heat Recovery Steam Generator (HRSG), including drums, valves, blowdown systems, expansion joints, and associated auxiliary equipment.<br> Pumps, including boiler feedwater pumps, condensate extraction pumps, closed cooling water pumps, service water pumps, fire water pumps, fuel oil pumps, chemical dosing pumps, and drainage pumps.<br> Compressors, blowers, fans, air handling units, ventilation fans, and instrument/service air compressor systems.<br> Valves, including gate, globe, check, control, safety Valves.<br> Water treatment, reverse osmosis, condensate polishing, chemical dosing, wastewater treatment, and other balance-of-plant mechanical equipment.<br> 2. Inspection, Testing, and Troubleshooting Conduct routine inspections and condition assessments of assigned mechanical equipment.<br> Use approved maintenance and diagnostic tools such as vibration meters, infrared thermometers, laser alignment tools, dial gauges, feeler gauges, torque wrenches, pressure gauges, vernier calipers, and micrometers.<br> Assist in vibration monitoring, alignment checks, bearing inspections, pump performance checks, valve testing, pressure testing, leak testing, and functional testing.<br> Record inspection findings, test readings, equipment condition, defects identified, and maintenance work completed.<br> Assist in identifying the root cause of equipment failures and support implementation of corrective actions.<br> Monitor repeated failures and report recommendations for repair, modification, replacement, or maintenance-plan improvement.<br> Support basic welding, fabrication, and workshop repair activities.<br> Participate in planned shutdowns, major outages, overhauls, commissioning activities, warranty works, and emergency repairs.<br> 3. Safety, Permit-to-Work, and Compliance Follow all applicable safety rules, permit-to-work requirements, lockout/tagout procedures, confined-space-entry requirements, lifting procedures, and site safety standards.<br> Verify that equipment is properly isolated, depressurized, drained, vented, cooled down, and released for maintenance before starting work.<br> Use required personal protective equipment, approved tools, lifting equipment, and safety devices at all times.<br> Participate in toolbox talks, risk assessments, safety observations, hazard reporting, audits, and incident investigations.<br> Immediately report unsafe conditions, leaks, damaged tools, lifting hazards, near misses, and incidents.<br> Follow environmental and waste-management requirements, including proper identification, handling, segregation, and disposal of waste materials.<br> Ensure maintenance work complies with approved site procedures, OEM requirements, quality standards, and EHS requirements.<br> 4. Documentation and CMMS Support Complete maintenance checklists, inspection sheets, work completion records, test reports, and defect reports accurately.<br> Provide clear feedback to the Mechanical Maintenance Engineer regarding work completed, materials used, defects found, and follow-up actions required.<br> Support work-order completion, man-hour recording, and equipment-history updates in the CMMS.<br> 5. Spare Parts, Tools, and Housekeeping Review assigned work orders and identify the required spare parts, consumables, tools, lifting equipment, and test instruments before starting work.<br> Check availability of spare parts and coordinate with the warehouse storekeeper for material collection and return.<br> Maintain mechanical hand tools, power tools, lifting tools, portable test instruments, and workshop equipment in good working condition.<br> Report shortages of spare parts, consumables, special tools, and defective equipment to the Mechanical Maintenance Engineer.<br> Maintain good housekeeping in workshops, equipment areas, stores, and maintenance locations.<br> 6. Coordination, Training, and Continuous Improvement Work closely with Mechanical Maintenance Engineers, Operations personnel, Electrical and I&amp;C teams, contractors, OEM representatives, and other site personnel.<br> Support Operations during equipment isolation, release for maintenance, testing, start-up, and return-to-service activities.<br> Assist other departments in troubleshooting and repair activities when required.<br> Support training and mentoring of junior technicians,, and newly joined maintenance personnel.<br> Participate in continuous-improvement initiatives, maintenance improvement programs, 5S activities, and hazard-reporting programs.<br> Education Mechanical Diploma, Mechanical Technology, or an equivalent discipline.<br> Mechanical trade certifications is preferred.<br> Training in rigging, lifting operations, Forklift operator, and safety courses is an advantage.<br> Experience Minimum 5 years of mechanical maintenance experience in a power plant, heavy industrial facility, oil and gas plant, desalination plant, petrochemical plant.<br> Combined cycle power plant experience is preferred.<br> Technical Knowledge Knowledge of mechanical systems used in combined cycle power plants.<br> Knowledge of gas turbines, steam turbines, HRSG systems, pumps, valves, compressors, fans, blowers, heat exchangers, filters, strainers, and piping systems.<br> Understanding of lube oil, hydraulic oil, fuel gas, fuel oil, cooling water, condensate, boiler feedwater, compressed air, and water-treatment systems.<br> Knowledge of rotating-equipment maintenance practices, including bearing inspection, lubrication, seal replacement, coupling alignment, and vibration awareness.<br> Familiarity with valve maintenance, including gland packing, seat leakage, Lapping, and basic valve overhaul activities.<br> Understanding of lifting and rigging, torque tightening, mechanical assembly, and use of lifting tools.<br> Knowledge of permit-to-work, lockout/tagout, confined-space entry, lifting operations, and general mechanical safety requirements.<br> Practical Skills Ability to use maintenance diagnostic tools such as vibration meters, infrared thermometers, pressure gauges, and tachometers.<br> Basic computer skills for CMMS andwork-order updates, maintenance records, and reporting.<br> Good working knowledge of written and spoken English.<br> Good communication, teamwork, and coordination skills.<br> Willingness to work during planned outages, emergency breakdowns, shift duties, and on-call assignments when required</span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About the Role</h3> <p style="margin:0 0 12px; ************;">Tuwaiq Casting &amp; Forging Company is seeking a <strong style="font-weight:700;">Forging Sr. Engineer</strong> to join their team in Ras Tannurah, Eastern region. This full-time role is critical for ensuring all forging products meet stringent internal quality standards and customer specifications. The successful candidate will implement and maintain effective quality control processes to minimize defects, improve production efficiency, and ensure compliance with industry standards and certifications.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Drive the implementation of QC procedures across the forging shop in accordance with organizational procedures and expectations.</li> <li style="margin:0 0 6px;">Control non-conforming products within the plant as per the NCR procedure, including internal NCR management.</li> <li style="margin:0 0 6px;">Prepare forging Inspection and Test Plans (ITP) and product inspection plans for both internal and external purposes to ensure product quality.</li> <li style="margin:0 0 6px;">Perform quality inspections on raw materials, in-process components, and finished forging products, adhering to material standards and API 20B requirements.</li> <li style="margin:0 0 6px;">Record inspection results and analyze quality data to identify trends and issues.</li> <li style="margin:0 0 6px;">Manage day-to-day inspection activities on the forging shop floor.</li> <li style="margin:0 0 6px;">Liaise with third-party inspection agencies for inspection and related activities.</li> <li style="margin:0 0 6px;">Responsible for final product clearance based on quality requirements.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Problem Solving and Continuous Improvement</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Analyze root causes of defects and establish corrective and preventive actions.</li> <li style="margin:0 0 6px;">Provide quality feedback to improve production processes.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Quality System Management</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Maintain and improve quality management systems such as ISO 9001 and APIQ1.</li> <li style="margin:0 0 6px;">Manage customer or third-party audits in conjunction with the Quality Assurance team.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Inspection Equipment Management</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Manage the calibration and maintenance of inspection equipment.</li> <li style="margin:0 0 6px;">Operate equipment to ensure measurement accuracy.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Qualifications and Experience</h3> <p style="margin:0 0 12px; ************;">Candidates should possess <strong style="font-weight:700;">5-10 years of relevant experience</strong> in a similar role within the forging industry. The salary for this position will be discussed during the interview process.</p>

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About Matar Al-Baqami Holding</h3> <p style="margin:0 0 12px; ************;">Established in 1977, Matar Al-Baqami Holding is a prominent leader in diversified industries across the Kingdom of Saudi Arabia. The company is committed to quality and excellence, maintaining rigorous ISO and ASME certifications across sectors including automotive, engineering, agriculture, real estate, and logistics. Its industrial division, which encompasses Salama Radiator and Salama Engineering, is recognized for delivering manufacturing solutions in heat-exchange and heavy-engineering applications.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">The Opportunity: QC Manager / Senior QC Engineer</h3> <p style="margin:0 0 12px; ************;">Matar Al-Baqami Holding is seeking a dedicated <strong style="font-weight:700;">QC Manager / Senior QC Engineer</strong> to join its team in Dammam, Eastern Province. This full-time position is critical for overseeing quality control processes within the Oil &amp; Energy sector, ensuring strict compliance with industry standards, and implementing strategies to enhance quality across various projects.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Role Purpose and Scope</h3> <p style="margin:0 0 12px; ************;">The Manager – Quality Control will be responsible for upholding the highest quality standards for radiators and cooling systems. This includes products supplied to the aftermarket, OEM, passenger and commercial vehicles, and industrial applications. The role involves comprehensive inspection, testing, and compliance activities, alongside initiatives for process improvement for radiators distributed within the Kingdom of Saudi Arabia, neighboring GCC countries, and for export markets.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Conduct inspection, testing, and reporting for aftermarket and OEM products to ensure compliance with industry, GCC-specific, and international standards.</li> <li style="margin:0 0 6px;">Develop and implement Quality Control protocols covering the entire product lifecycle, from inbound raw materials to outbound finished goods.</li> <li style="margin:0 0 6px;">Liaise with suppliers to maintain product traceability and effectively resolve non-conformance issues.</li> <li style="margin:0 0 6px;">Provide technical support and training to internal teams on quality standards and best practices for radiators.</li> <li style="margin:0 0 6px;">Collaborate with aftermarket radiator companies across Saudi Arabia and the GCC region to ensure consistent product quality.</li> <li style="margin:0 0 6px;">Prepare and present detailed reports to management on QA findings, corrective actions, and overall compliance status.</li> <li style="margin:0 0 6px;">Maintain comprehensive records and quality documentation in both Arabic and English, as required.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Required Experience</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">A minimum of <strong style="font-weight:700;">10 years of relevant experience</strong> in quality control or quality assurance, preferably within the automotive, engineering, or oil and energy sectors.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Work Environment and Compensation</h3> <p style="margin:0 0 12px; ************;">This is a full-time position based in Dammam, Eastern Province. The salary for this role will be discussed during the interview process and is not disclosed at this time.</p>