Equipment operator Jobs

Key Accountabilities:Checks, inspects all the electrical parts/equipment in the whole plant. Reports all abnormalities observed, notification generation against abnormalities. Plan layout and installation of electrical wiring, equipment and fixtures, based on job specifications and local codes. Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes, to ensure compatibility and safety of system. Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes. Connect wires to circuit breakers, transformers, or other components. Diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools Reporting of any abnormality noticed in the equipment while executing the preventive maintenance work order. Notification generation against the abnormality observed in the equipment’s. Provide assistance during emergencies by operating floodlights and generators, placing flares, and driving needed vehicles. Execute activities related to his/her function in safe and environmental friendly methods.<br>Qualifications, Experience, Knowledge:Diploma in Mechanical, Electrical, or Mechatronics Engineering.3–5 years of relevant work experience, preferably in the paper or tissue manufacturing industry. Fair proficiency in English (reading, writing, and communication). Good troubleshooting and problem-solving skills. Good interpersonal and communication skills.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>We are seeking a skilled Cleaning Technician with experience working in a Post Weld Heat Treatment (PWHT) plant.<br> The successful candidate will be responsible for cleaning industrial equipment, components, and work areas while ensuring compliance with safety, quality, and operational standards.<br> The role requires knowledge of industrial cleaning methods and experience working in fabrication or heat treatment environments.<br> Key Responsibilities Perform cleaning of PWHT furnaces, fixtures, tools, piping, and associated equipment.<br> Clean fabricated components before and after PWHT using approved methods and materials.<br> Remove scale, rust, oil, grease, and other contaminants from metal surfaces.<br> Operate industrial cleaning equipment, including pressure washers, vacuum systems, and hand tools.<br> Maintain cleanliness of work areas, workshops, and storage locations.<br> Dispose of waste materials in accordance with company procedures and environmental regulations.<br> Support PWHT operations by preparing equipment and work areas for production.<br> Qualifications High school diploma or equivalent.<br> Certificate in industrial cleaning or related technical field is an advantage.<br> Experience Minimum 2–5 years of experience as a Cleaning Technician in an industrial, fabrication, refinery, or PWHT plant environment.<br> Experience working with heavy industrial equipment and metal components.<br> Familiarity with industrial cleaning chemicals and safe handling practices.<br> Skills &amp; Competencies Knowledge of industrial cleaning techniques and equipment.<br> Understanding of PWHT plant operations and fabrication environments.<br> Awareness of HSE standards and safe work practices.<br> Ability to work independently and as part of a team.<br> Good physical fitness and ability to work in demanding industrial environments.<br> Basic communication and reporting skills.<br> Working Conditions</span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 1+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Job Purpose / Objective&nbsp; </strong></p><br> <p>Assist the anesthesia provider (anesthesiologist or CRNA) with equipment, medications, and supplies utilized in the course of the anesthesia provider’s practice. Provide assistance with patient care and department support activities in accordance with department standards.</p><br> <p><strong>Key Responsibilities / Accountabilities&nbsp;&nbsp; </strong></p><br> <ul> <li>Assist the attending anesthesiologist in conducting patient consultations; help to record any information concerning the patient's medical history that might be vital during the actual operation.</li> <li>Work as an aide to the anesthesia care team, especially to the anesthesiologist.</li> <li>Provide assistance to anesthesia team in assembling equipment and supplies for the administration of anesthesia.</li> <li>Clean, maintain and troubleshoot the anesthesia related equipment and workroom.</li> <li>Operate the electronic, mechanical and other technical equipment during the operation.</li> <li>Keep all anesthesia supplies stocked and maintain the record of the anesthesia supplies used during the operation.</li> <li>Change soda lime and compressed gas cylinders as required and replace EKG electrodes, breathing circuits and suction apparatus after each case.</li> <li>Monitor and record of patient's vital signs including breathing, heart rhythm, temperature and blood pressure.</li> <li>Conduct periodical inspection to check all devices are working fine and report any inconsistencies found to attending anesthesiologist immediately.</li> <li>Adjust the electronic equipment, as well as sterilize anesthesia machinery prior the surgery.</li> <li>Note and follow any specific instructions from the physician that is also part of the pre op procedure.</li> <li>Receive delivery of supplies and pharmaceuticals and stores them in proper locations.</li> <li>Maintain a clean working environment and follow all hospital related policies and procedures.</li> <li>Provide patient and family education as per the needs.</li> <li>Participate in person-centered care initiatives undertaken by HMG.</li> <li>Enrich patient experience with compassion, respect and dignity.</li> <li>Perform other related duties that are applicable to the department and as requested by the head of department.</li> </ul><br><p><strong>Education/ Professional Qualification</strong></p><br><ul><li>Bachelor Degree in Anaesthesia</li></ul><p><strong>Experience</strong></p><br><ul><li>At least Two (2) years of experience as an Anaesthesia Technician.</li></ul><p><strong>Professional Licensing / Certification / Training &nbsp;</strong></p><br><ul><li>Relevant certificates (BLS &amp; ACLS certified).</li><li>Valid Saudi Council license.</li></ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 1+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About the Role: Operator Straightener</h3> <p style="margin:0 0 12px; ************;">ArcelorMittal Tubular Products Al-Jubail is seeking a dedicated <strong style="font-weight:700;">Operator Straightener</strong> to join our team in Jubail, Eastern, Saudi Arabia. This full-time position is crucial for maintaining operational excellence and ensuring the production of high-quality tubular products. The role involves adhering strictly to area-specific Standard Operating Procedures (SOPs) to ensure safety, efficiency, and product quality.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities and Operational Focus</h3> <p style="margin:0 0 12px; ************;">The Operator Straightener is responsible for the safe and efficient operation of all equipment within their area, contributing directly to a secure working environment and the consistent delivery of products that meet all customer specifications. This role actively supports continuous process improvement initiatives, ensuring that operational practices evolve to enhance productivity and quality standards.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Core Duties and Accountabilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Perform preventative maintenance on equipment according to manufacturer’s instructions, troubleshoot malfunctions, and arrange for necessary repairs.</li> <li style="margin:0 0 6px;">Execute maintenance-related tasks (Trade Assist) during both planned and unplanned operational outages.</li> <li style="margin:0 0 6px;">Read, understand, and comply with all company policies, procedures (including SOPs), instructions, rules, and regulations related to safety, environment, and quality.</li> <li style="margin:0 0 6px;">Respond appropriately to operational situations, providing information and reports, and communicating effectively with team members.</li> <li style="margin:0 0 6px;">Ensure accurate product identification and traceability throughout the entire production process.</li> <li style="margin:0 0 6px;">Optimize output to achieve the highest possible product quality.</li> <li style="margin:0 0 6px;">Complete all required paperwork and electronic data collection accurately and promptly.</li> <li style="margin:0 0 6px;">Ensure pipe straightness meets customer, API, and ARMCO specifications.</li> <li style="margin:0 0 6px;">Effectively and efficiently set up, monitor, and operate the straightening machine.</li> <li style="margin:0 0 6px;">Conduct regular visual and dimensional inspections of straightener rolls and replace worn rolls as required.</li> <li style="margin:0 0 6px;">Ensure proper cooling of straightener rolls.</li> <li style="margin:0 0 6px;">Regularly clean the scale pit to maintain operational efficiency.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Qualifications and Experience Requirements</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">High School level education with a minimum of <strong style="font-weight:700;">3 years of on-the-job experience</strong> in a related function.</li> <li style="margin:0 0 6px;">A Post High School Diploma is not mandatory but is preferred, especially in a similar industrial sector.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Work Environment and Location</h3> <p style="margin:0 0 12px; ************;">This is a full-time position based at our facilities in Al Jubail, Eastern Province, Saudi Arabia. The role operates within a manufacturing environment focused on tubular product production, requiring adherence to strict safety and quality protocols.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Application Process</h3> <p style="margin:0 0 12px; ************;">Candidates who meet the qualifications and are prepared to contribute to a leading global steel and mining company are encouraged to apply. We look forward to reviewing your application.</p>

<p>We are seeking a skilled and safety-conscious <strong>Reach Truck Operator</strong> to join our warehouse team in <strong>KSA</strong>. The successful candidate will be responsible for operating a reach truck to move, locate, stack, and count merchandise in an efficient and safe manner, ensuring smooth warehouse operations.</p><p><br></p><p>-Operate a reach truck to load, unload, move, stack, and stage products and materials.</p><p>-Perform daily equipment checks and report any mechanical issues.</p><p>-Pick, pack, and prepare orders according to company standards.</p><p>-Ensure accurate inventory control by verifying product quantities and locations.</p><p>-Follow warehouse procedures and safety protocols at all times.</p><p>-Maintain cleanliness and organization of the warehouse.</p><p>-Assist with other general warehouse duties as assigned by the supervisor.</p><p><strong>Desired Candidate Profile</strong></p><p>-Proven experience operating a <strong>reach truck</strong> in a <strong>Lubricant/Chemical storage warehouse or distribution environment</strong>.</p><p>-Valid forklift/reach truck operator License(as per local regulations).</p>

<p class="isSelectedEnd"><b>Job Summary</b></p><p class="isSelectedEnd">A company specializing in <strong>electrical tools and construction equipment</strong> wishes to attract a <strong>Mechanical Sales Engineer</strong> to manage and develop key customer relationships and attract new sales opportunities through field visits and customer site visits.</p><p>Tasks include understanding customers' technical needs, presenting appropriate products and solutions, preparing commercial offers, and following up on sales opportunities until completion and achievement of sales targets.</p><p><strong>A car provided by the company</strong> for field visits and customer visits.</p><p><b>Requirements</b></p><p></p><ul><li>Bachelor's degree in Mechanical Engineering or a related engineering discipline.</li><li>4 to 8 years of experience in technical sales, industrial equipment sales, construction equipment sales, or related products.</li><li>Experience dealing with companies, key clients, and contractors.</li><li>Good skills in sales, negotiation, and customer relationship building.</li><li>Ability to understand customers' technical needs and provide appropriate solutions.</li><li>Willingness for continuous field visits and customer site visits.</li><li>Proficiency in English, spoken and written.</li><li>Proficiency in computer use.</li><li>Ability to work according to targets and achieve sales goals.</li><li><b>Valid driver's license.</b></li></ul><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a highly skilled and experienced Senior Mechanical Engineer (Irrigation &amp; Pumping) to join our team. The Senior Mechanical Engineer will be responsible for the design review, planning, supervision, and execution of irrigation systems, pumping stations, and related mechanical infrastructure, ensuring adherence to engineering standards, safety protocols, and project timelines. The ideal candidate will possess strong technical expertise in pumping systems, irrigation networks, hydraulic calculations, equipment installation, testing and commissioning, and infrastructure development. </p><p><strong>Responsibilities</strong>: Lead the technical review and supervision of irrigation systems, pumping stations, mechanical infrastructure, equipment installation, and related piping works. Review mechanical drawings, pump calculations, equipment datasheets, shop drawings, material submittals, method statements, testing documents, and commissioning procedures. Assess pump selection, hydraulic performance, valve arrangements, pressure requirements, piping layouts, equipment foundations, and control system interfaces. Coordinate mechanical works with civil, electrical, instrumentation, landscape, utilities, and control system disciplines. Provide technical guidance to engineers and inspectors and resolve mechanical design, installation, testing, and commissioning issues. Monitor construction progress, conduct regular site inspections, and verify compliance with approved drawings, quality requirements, and safety standards. Oversee testing, commissioning, performance verification, snagging, as-built documentation, O&amp;M manuals, and project handover deliverables. Prepare technical reports, review comments, risk assessments, recommendations, and progress updates for client and project management review </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree in Mechanical Engineering, Electromechanical Engineering, or a related field. A Master's degree or relevant professional certification is preferred. Proven work experience of at least 10 years in pumping stations, irrigation systems, mechanical infrastructure, equipment installation, and construction supervision. In-depth knowledge of pumping systems, irrigation networks, pump selection, hydraulic calculations, valves, piping, equipment installation, and commissioning. Proficiency in using CAD software, pump selection software, hydraulic calculation tools, and Microsoft Office applications. Strong analytical and problem-solving skills, with the ability to interpret complex mechanical data and provide practical engineering solutions. Excellent communication and interpersonal skills, with the ability to coordinate effectively with multidisciplinary teams, contractors, clients, and authorities. </p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Senior Planning Engineer</b> in <b>Saudi Arabia</b>. Our client is a reputed organization in the Oil &amp; Gas Equipment Manufacturing sector seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Develop and maintain integrated production and project schedules.<br></li><li>Plan manufacturing activities for maximum productivity and resource utilization.<br></li><li>Monitor schedule progress and implement recovery plans when required.<br></li><li>Prepare weekly/monthly production plans and management reports.<br></li><li>Coordinate with engineering, procurement, quality, logistics and manufacturing teams.<br></li><li>Perform capacity planning, workload balancing and resource forecasting.<br></li><li>Conduct delay analysis and recommend corrective actions.<br></li><li>Ensure compliance with API, DNV and customer quality standards.<br></li></ul>Required Skills<br><ul><li><b>Production &amp; Project Scheduling</b> – Develop and manage integrated schedules.<br></li><li><b>Capacity &amp; Resource Planning</b> – Optimize manpower and equipment utilization.<br></li><li><b>Microsoft Dynamics 365 ERP</b> – Production planning and schedule management.<br></li><li><b>API &amp; DNV Standards</b> – Knowledge of API Q1, API 6A, 16A, 16C, 16D, 20E and DNV.<br></li><li><b>Manufacturing Planning</b> – Oil &amp; Gas equipment manufacturing expertise.<br></li></ul>Preferred Skills<br><ul><li>Cost-loaded project scheduling<br></li><li>Manufacturing workflow optimization<br></li><li>Advanced reporting and KPI analysis<br></li></ul>Work Experience Requirements<br><p>Candidates should possess extensive experience as a Planning Engineer within the Oil &amp; Gas equipment manufacturing industry. Experience in manufacturing planning for pressure control equipment, valves, wellhead systems, drilling equipment or similar products is essential. Strong background in production scheduling, project execution and resource optimization is required.<br></p><br>Education<br><ul><li><b>Minimum:</b> Bachelor's Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering or related discipline.<br></li><li><b>Preferred:</b> Master's Degree or Project Management Certification.<br></li><li><b>Additional Certifications:</b> Primavera P6 / PMP (Preferred)<br></li></ul>+91 97881 10111<br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<b>انضم إلى فريق العمل في شركة نمق قهوة ومحمصة | namq coffee رائدة في مجال القهوة!</b><br>نبحث عن مشغل عمليات (كاشير) للانضمام إلى شغفنا في توفير أفضل تجربة لعملائنا. وتشمل مسؤولياتك التعامل مع الزبائن وإدارة عمليات الدفع بكفاءة.<br><ul><li><b>عدد ساعات العمل:</b> 8 ساعات يوميًا</li><li><b>أيام العمل:</b> 6 أيام في الأسبوع</li><li><b>الأولوية:</b> لمن لديه كرت صحي ساري وخبرة سابقة في مجال الكوفيهات</li></ul><br>نحن نقدم بيئة عمل احترافية مع فرص للتطور والنمو الوظيفي.

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Role Overview</h3> <p style="margin:0 0 12px; ************;">Acwa China is seeking a dedicated <strong style="font-weight:700;">CCR Operator I</strong> to join its team in Rabigh. This full-time position is central to monitoring and controlling unit and plant operation parameters, ensuring seamless coordination with other operators on all related activities that impact overall plant operations.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Core Operational Duties</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Monitor all parameters of the assigned unit and accurately record periodic readings on log sheets.</li> <li style="margin:0 0 6px;">Summarize all operational activities and significant events that occur during the shift in the log book.</li> <li style="margin:0 0 6px;">Inspect the unit and its auxiliary equipment throughout the shift to confirm all parameters remain within specified operational limits.</li> <li style="margin:0 0 6px;">Report any observed abnormalities promptly to the Shift Supervisor or Shift Charge Engineer.</li> <li style="margin:0 0 6px;">Perform equipment changeovers in strict accordance with preset schedules.</li> <li style="margin:0 0 6px;">Demonstrate vigilance and take swift, decisive actions during abnormal operating conditions to maintain plant stability.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Compliance and Support Responsibilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Comply with all safety rules and regulations, maintaining thorough familiarity with fire equipment located within the designated area.</li> <li 0="" style="margin=" 6px;"="">Maintain comprehensive familiarity with plant P&amp;IDs, Standard Operating Procedures (SOPs), Work Instructions, Operation and Control Logics, Emergency Operation Procedures, and all other pertinent operational documents.</li> <li style="margin:0 0 6px;">Follow all instructions provided by the Shift Charge Engineer and Shift Supervisor, coordinating effectively with other operators on all operational activities.</li> <li style="margin:0 0 6px;">Coordinate and ensure proper Lock Out &amp; Tag Out procedures are implemented during the isolation of equipment for maintenance, adhering to the approved Permit To Work procedure. Normalize equipment as instructed after cancellation.</li> <li style="margin:0 0 6px;">Conduct periodic protection tests under the supervision of the Shift Charge Engineer or Supervisor, maintaining accurate records of these tests.</li> <li style="margin:0 0 6px;">Raise work requests or defect notes for faulty equipment and actively follow up on the rectification of these defects.</li> <li style="margin:0 0 6px;">Assist in the training and familiarization process for new operators joining the team.</li> <li style="margin:0 0 6px;">Report all near misses and implement prescribed risk controls to enhance workplace safety.</li> <li style="margin:0 0 6px;">Report any deviations observed within the Quality, Health, Safety, and Environmental Management System.</li> <li style="margin:0 0 6px;">Ensure proper waste disposal measures are consistently followed.</li> <li style="margin:0 0 6px;">Perform other duties as assigned to support the continuous and safe operation of the plant.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Required Experience</h3> <p style="margin:0 0 12px; ************;">Candidates for the CCR Operator I position must possess <strong style="font-weight:700;">5 to 10 years of relevant experience</strong> in plant operations or a similar industrial control room environment.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Work Environment and Location</h3> <p style="margin:0 0 12px; ************;">This is a full-time role based in Rabigh, Saudi Arabia, within a dynamic plant environment that requires strict adherence to operational and safety protocols.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Application Information</h3> <p style="margin:0 0 12px; ************;">Interested candidates are invited to submit their applications, detailing their qualifications and relevant experience for consideration.</p>

<h3 >About Golden Compass</h3> <p >Golden Compass is an independent international consulting, drilling, and services practice. Established in 2015, the company provides focused advice, solutions, and services contracting to the earth resource industry. Its services span from exploration to mine closure for mining projects. Golden Compass employs over 250 professionals internationally across more than 3 offices on 3 continents.</p> <h3 >The Role of Field Mechanic</h3> <p >Golden Compass is seeking a dedicated <strong >Field Mechanic</strong> to join its team in Jiddah and Makkah, Saudi Arabia. This full-time role is crucial for maintaining and repairing essential machinery and vehicles, ensuring the functionality and reliability of various mechanical systems, engines, and equipment.</p> <h3 >Key Responsibilities</h3> <ul > <li >Travel to field sites to perform diagnostics, emergency breakdown repairs, and scheduled inspections on machinery and vehicles.</li> <li >Diagnose mechanical issues and execute corrective maintenance on equipment.</li> <li >Implement preventive maintenance programs and inspection checklists to ensure equipment reliability and operational readiness.</li> <li >Ensure all equipment is properly inspected prior to deployment to field sites.</li> <li >Maintain accurate records of all maintenance activities and repairs performed.</li> <li >Report field issues, equipment status, and spare parts requirements to the Field Coordinator or Maintenance Supervisor.</li> <li >Manage onsite inventory of essential spare parts, including hoses, filters, and lubricants.</li> <li >Adhere to site safety procedures and HSE policies during all maintenance operations.</li> <li >Utilize diagnostic tools to test equipment performance and identify potential malfunctions.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of <strong >5 to 10 years</strong> of experience in a relevant field mechanic role.</li> <li >Proven ability to diagnose and repair a wide range of machinery and vehicles.</li> <li >Strong understanding of mechanical systems, engines, and diagnostic tools.</li> </ul> <h3 >Work Environment and Location</h3> <p >This is a full-time position based in the Jiddah and Makkah region of Saudi Arabia, requiring travel to various field sites as needed. The role operates within the earth resource industry, demanding adherence to strict safety and operational protocols.</p> <h3 >Application Process</h3> <p >Interested candidates who meet the qualifications are encouraged to apply.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The A/C Technician is responsible for the installation, operation, maintenance, troubleshooting, and repair of heating, ventilation, air conditioning (HVAC), refrigeration, and ventilation systems throughout the hotel. The role ensures that all guest rooms, public areas, restaurants, banquet facilities, back-of-house areas, and critical mechanical systems operate efficiently and reliably, maintaining the highest standards of guest comfort, safety, energy efficiency, and luxury hospitality.</p><p>Key Responsibilities</p><p>Preventive Maintenance</p><ul><li>Perform preventive maintenance on HVAC, refrigeration, ventilation, and chilled water systems according to the hotel's maintenance schedule.</li><li>Inspect, clean, lubricate, and adjust mechanical equipment to ensure optimal performance.</li><li>Replace filters, belts, bearings, motors, thermostats, valves, and other HVAC components as required.</li><li>Maintain accurate preventive maintenance records and equipment history.</li></ul><p>Repairs and Troubleshooting</p><ul><li>Diagnose and repair faults in air conditioning, refrigeration, ventilation, fan coil units (FCUs), air handling units (AHUs), package units, split systems, pumps, and associated controls.</li><li>Respond promptly to guest room and operational maintenance requests.</li><li>Troubleshoot electrical and mechanical faults using appropriate testing equipment.</li><li>Minimize equipment downtime through timely repairs and effective problem-solving.</li></ul><p>Guest Room &amp; Public Area Support</p><ul><li>Ensure guest room air conditioning systems operate efficiently and quietly.</li><li>Maintain comfortable temperature and humidity levels throughout the hotel.</li><li>Respond immediately to guest complaints related to air conditioning or ventilation.</li><li>Coordinate maintenance activities to minimize disruption to guests and hotel operations.</li></ul><p>Plant Room Operations</p><ul><li>Monitor the performance of chillers, cooling towers, pumps, heat exchangers, and mechanical ventilation systems.</li><li>Record equipment operating parameters and report abnormalities.</li><li>Assist with plant shutdowns, startups, and seasonal maintenance activities.</li><li>Support emergency repairs to critical HVAC infrastructure.</li></ul><p>Energy Management</p><ul><li>Assist in implementing energy conservation initiatives.</li><li>Monitor HVAC performance to improve operational efficiency and reduce energy consumption.</li><li>Recommend equipment upgrades and maintenance improvements that enhance system reliability and sustainability.</li><li>Support the hotel's environmental and sustainability objectives.</li></ul><p>Safety &amp; Compliance</p><ul><li>Follow all occupational health and safety procedures during maintenance activities.</li><li>Ensure compliance with local building codes, environmental regulations, and refrigerant handling requirements.</li><li>Use appropriate personal protective equipment (PPE) at all times.</li><li>Report unsafe conditions and equipment defects immediately.</li><li>Maintain proper handling, recovery, storage, and disposal of refrigerants in accordance with applicable regulations.</li></ul><p>Documentation</p><ul><li>Complete work orders accurately and promptly through the hotel's maintenance management system.</li><li>Maintain maintenance logs, inspection records, and equipment documentation.</li><li>Report recurring equipment issues and recommend corrective actions.</li><li>Assist in maintaining spare parts inventory.</li></ul><p>Teamwork</p><ul><li>Coordinate with Engineering colleagues and other hotel departments during maintenance activities.</li><li>Support banquet, conference, and special event operations by ensuring HVAC systems are functioning properly.</li><li>Assist with general engineering duties when required.</li><li>Participate in emergency response procedures and technical standby coverage.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma or technical certification in HVAC, Air Conditioning, Refrigeration, Mechanical Engineering, or a related trade.</li><li>Valid HVAC or refrigeration certification/license, where required by local regulations.</li><li>Minimum 3 years of HVAC maintenance experience, preferably in a luxury hotel, resort, hospital, or large commercial facility.</li><li>Experience working with Building Management Systems (BMS) is an advantage.</li></ul><p></p></section>

<ul><li>Oversee daily laundry operations, ensuring efficient workflow and timely processing of all garments and linens.</li><li>Manage and train laundry staff, fostering a productive and safe working environment while monitoring performance.</li><li>Implement and enforce strict quality control standards for washing, drying, pressing, and folding to meet guest and hotel expectations.</li><li>Maintain inventory of laundry supplies, chemicals, and equipment, placing orders as needed and ensuring optimal stock levels.</li><li>Troubleshoot and perform minor maintenance on laundry machinery, coordinating with external technicians for major repairs.</li><li>Develop and implement staff schedules, ensuring adequate coverage during peak hours and managing labor costs effectively.</li><li>Ensure compliance with all health, safety, and sanitation regulations within the laundry department.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Demonstrated experience in supervising a team of laundry personnel.</p></li><li><p>Proficiency in operating various types of industrial laundry equipment and understanding of chemical applications.</p></li><li><p>Strong understanding of hygiene, sanitation, and safety protocols in a laundry environment.</p></li><li><p>Excellent communication and interpersonal skills for effective team management and guest interaction.</p></li><li><p>Supervises laundry operations, ensures equipment performance, and maintains hygiene standards. </p></li></ul>

<ul><li>Oversee the installation, commissioning, and startup of mechanical systems on-site, ensuring adherence to design specifications and safety protocols.</li><li>Diagnose and resolve complex mechanical equipment failures and performance issues in real-time, minimizing downtime and operational disruptions.</li><li>Conduct thorough site inspections and performance testing of machinery, identifying potential risks and recommending proactive maintenance strategies.</li><li>Collaborate with project managers and clients to define project scope, technical requirements, and installation timelines for mechanical components.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Mechanical Engineering or a related field from an accredited institution.</p></li><li><p>Minimum of 7 years of progressive experience in field engineering, with a strong focus on mechanical systems in powerplants.</p></li><li><p>Proficiency in reading and interpreting complex engineering blueprints, schematics, and P&IDs.</p></li><li><p>Demonstrated expertise in troubleshooting and repairing rotating equipment, pumps, compressors, and static equipment.</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Reimagine What’s Possible </b></p><p><br></p><p><br></p><p><b><u>POSITION SUMMARY</u></b></p><p><b><u>Purpose</u></b></p><p>The HYCO Steam Methane Reformer Shift Operator is accountable for the day-to-day operation for one of the APQ facilities which can include a Hydrogen Steam Methane Reformer, a CO2 Removal Unit &amp; CO2 Compression, Auxiliary PSA, Membrane Unit, related Utilities and pipeline network for the Air Products Qudra (APQ) Company in Jubail, Saudi Arabia.</p><p><b><u>Nature &amp; Scope</u></b></p><p>The HYCO Shift Operator, reporting to the HYCO Lead/Shift Supervisor, is accountable for the day-to-day operation of the HYCO facility, ensuring the production requirements set by the customer are achieved in a safe and efficient manner.&nbsp; The Shift Operator will execute daily tasks which include preparing and implementing safety work permits, LOTO, complete operations preventative maintenance activities, and assist the maintenance and engineering teams in preparing and executing corrective maintenance activities.</p><p>NOTE: “ALL OPERATORS INTERVIEWED BASED ON YEARS OF SERVICE, EXPERIENCE, AND LEADERSHIP SKILLS WILL BE EVALUATED AND CONSIDERED FOR LEAD AND SUPERVISOR POSITIONS AFTER COMPLETION OF THE OPERATOR PROGRESSION COURSE.&nbsp; PERSONS WITH A MINIMUM OF 5 YEARS TO 15 + YEARS EXPERIENCE IN PLANT OPERTIONS AND LEADERSHIP POSITIONS WILL BE CONSIDERED”.</p><p><b><u>PRINCIPAL ACCOUNTABILITIES</u></b></p><p><b><u>Safety</u></b></p><p>Maintain a safe work environment.&nbsp; Demonstrate leadership with all company &amp; industry safe work processes to prevent all injuries.&nbsp; Ensure proper documentation is maintained for safety related activities.</p><p><b><u>Technical:</u></b></p><ul><li>Operate the HYCO Steam Methane Reformer and CO2 recovery units and ancillary equipment including water treatment units as prescribed by the Work Instruction Procedures</li><li>Operate the pipeline network to supply hydrogen, steam, and CO2 to the pipeline customers safely and efficiently.&nbsp;The Pipeline operations team will be part of the overall operating team and will also manage the oxygen and nitrogen pipeline products.</li><li>Provide Operations support &amp; guidance during the commissioning of the plant.&nbsp;Maintain accurate document control and monitor quality assurance initiatives.&nbsp;</li><li>Provide Operations guidance to ensure safety, reliability and maintainability of equipment, processes, utilities, and controls.</li><li>Manage plant production efficiently based on input provided from Plant Management and Plant Production Engineering to ensure safety and reliability targets are met to achieve maximum profitable.</li><li>Report shift production progress and plant status to the Shift Supervisor, providing operational solutions for shortfall areas.</li></ul><p><b><u>Operations</u></b></p><ul><li>Ensure the safety of all operations personnel by utilizing the APQ Basic Safety Practice program, which includes Safety Work Permits, LOTO, Confined Space, etc.&nbsp;The position facilitates executing, organizing, and auditing, to build the Air Products safety culture into the APQ.</li><li>Ensure compliance with process safety, MOC’s, and OPHR requirements.</li><li>Operate the facility insuring Environmental and Regulatory requirements are not exceeded.</li><li>Assist in the commissioning activities of the facility</li><li>Ensure Air Products and APQ standards, and global best practices for EH&amp;S, productivity, reliability, quality, and overall customer services are met</li><li>Follow the Site Work Instruction Manuals for the HYCO, CO2, and ancillary equipment units, along with adhering to other operating and maintenance procedures and checklists to meet the customer’s satisfaction on safety, reliability, product quality, and flexibility of product supply while in compliance of contractual requirements.</li><li>Follow shift turnover protocols to ensure the safe and efficient handover to the following shift.</li><li>Support &amp; maintain close working relationships with engineering and maintenance personnel to continuously monitor &amp; evaluate plant systems &amp; equipment through a Plant Process Advisory Model.</li><li>Support the maintenance and engineering team in maintaining plant reliability through the execution of preventive maintenance activities scheduled and coordinating of corrective maintenance activities of the equipment in order to optimize activities during plant shut-downs to avoid business interruption.</li><li>Provide operations support and participate in investigations and Root Cause Analysis in order to identify &amp; implement sustainable corrective actions.</li><li>Facilitate attainment of operational excellence and customer satisfaction via operations productivity, reliability, quality, and continuous improvement initiatives.</li><li>Maintain customer communications and relationships at the ‘board’ level, insuring customer demand rates are satisfied while maximizing the efficiency and profitability of the facility.</li><li>Communication of plant activities with other shifts to maintain continuity between shifts for a safe and reliable operation.</li><li>Execute other duties as assigned from reporting managers in a timely and efficient manner.</li><li><br></li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b><u>JOB REQUIREMENTS</u></b></p><ul><li>Bachelor’s degree in Chemical, Mechanical, or Chemical Process Operations preferred.&nbsp;An Associate Technical Degree (2-year certificate) will be considered based on years of experience and competence. Experience in process plant operation, demonstrated Hydrogen/SMR/acid gas removal units production plant knowledge a plus with a minimum of 5 years plant operations experience.</li><li>Expectation based on level of experience for the operations team to achieve a ‘Level 1 / Board Level’ status within 2 – 4 years.&nbsp;Operators will be evaluated during the training period and placed at the level of competence accordingly. All the operations team are considered field and board operators when Level 1 is achieved.</li><li>Knowledgeable in the local environmental and health and safety requirements.</li><li>Demonstrated interpersonal skills.</li><li>A strong commitment to employee involvement, team building and diversity.</li><li>Able to communicate between operations and maintenance teams.</li><li>Ability to communicate with the customer at the board level on a daily basis.</li><li>Proficiency in English speaking and writing.</li></ul><p><br></p></div>

At Qiddiya Investment Company, we are shaping a landmark destination redefining entertainment, culture and hospitality in the Kingdom. The Hospitality Business Unit is developing a portfolio of hotel assets central to this vision. As these assets progress, we are seeking experienced professionals to help deliver them to the highest standards of design quality, guest experience and commercial performance.<br><br>In this role, you will lead the creative interior design agenda for the hospitality portfolio, defining narratives, signature elements and material strategies across all asset tiers to unlock distinctive, innovative and commercially effective designs that define each asset's identity, and ensure this is carried through concept, mock-up and design freeze.<br><br>Key Responsibilities<br><br>Lead the interior design definition of hotel concepts from development brief to approved design direction, curating distinctive, emotive and commercially viable environments aligned with Qiddiya, district and Operator visions Articulate and position design proposals through compelling narratives, visuals and presentations to secure alignment and timely outcomes across governance and investment stages Define interior design principles, narratives, material strategies and signature elements for each hotel tier, establishing consistent and distinctive design baselines across the portfolio Oversee consultant briefing and scope definition, validating interior design scope, specialist inputs and FF&E requirements to ensure alignment with design intent, Operator standards and governance approvals Oversee visualisation and design communication (including CGI strategy), ensuring concepts are clearly articulated and aligned with design narratives and stakeholder expectations Lead and govern interior design and specialist consultants, driving strategic approaches on appointment, scope and deliverables and overseeing performance, quality and creative alignment Provide functional governance to project-embedded design management teams, reviewing and endorsing interior design deliverables to ensure approved design intent is maintained through delivery Lead structured review of design submissions across key milestones, providing clear feedback and endorsement to support design progression Lead technical input to development briefs and coordinate across disciplines, embedding experiential intent across layouts, guest journeys, FF&E and key touchpoints Oversee FF&E strategies and specifications, ensuring commercial alignment, procurement integration and consistency with design intent and Operator requirements Lead mock-up and design validation processes, defining mock-up briefs, guiding inspections and ensuring quality through to design freeze Provide creative and technical design oversight through design and construction, resolving interfaces and deviations to maintain quality and design integrity Guide value engineering and design optimisation, balancing design intent with guest experience, cost, programme and operational requirements Champion innovation in guest experience, materials and sensory design, embedding ESG and Vision 2030 priorities Mentor teams and drive continuous improvement of design processes, standards and best practices across the portfolio<br><br>Requirements<br><br>Qualifications<br><br>Bachelor's degree in Interior Design, Interior Architecture or related discipline<br><br>Professional Certifications <br><br>Professional membership or recognised certification preferred (e.g. RIBA, NCIDQ, BIID or equivalent) <br><br>Years Of Experience<br><br>15+ years' experience in interior design, with strong hospitality focus and senior creative leadership experience<br><br>Skills & Attributes Required<br><br>Strong interior design literacy, creative judgement and design review capability across all project stages Deep understanding of creative and technical hospitality design, including guest experience, spatial planning, materials, lighting and FF&E specification Exceptional storytelling and visual communication, translating design narratives into compelling presentations and concept outputs Ability to manage design consultants and influence creative outcomes Commercial awareness of cost and programme impacts as well as FF&E budgets, procurement timelines and value engineering trade-offs Strong stakeholder management and creative leadership, articulating design intent to secure alignment and drive decision-making Proficiency in design and coordination tools (e.g. Adobe Creative Cloud, Sketch Up, Revit, BIM, CDE platforms, Aconex, Autodesk Construction Cloud etc.)<br><br>Preferred Background & Experience<br><br>Experience in a senior creative leadership role (Design Director, Studio Director or equivalent) within a leading design practice or developer environment Proven track record delivering hospitality assets, including luxury and ultra luxury tiers Experience managing interior design consultants across multiple projects Experience managing FF&E strategies, specification development and mock-up programmes Strong experience presenting design concepts and narratives to senior stakeholders Experience working with international hotel Operators and brand standards Experience in KSA / GCC or similar large-scale development environments preferred

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>At Qiddiya Investment Company, we are shaping a landmark destination redefining entertainment, culture and hospitality in the Kingdom.<br> The Hospitality Business Unit is developing a portfolio of hotel assets central to this vision.<br> As these assets progress, we are seeking experienced professionals to help deliver them to the highest standards of design quality, guest experience and commercial performance.<br> In this role, you will lead the creative interior design agenda for the hospitality portfolio, defining narratives, signature elements and material strategies across all asset tiers to unlock distinctive, innovative and commercially effective designs that define each asset’s identity, and ensure this is carried through concept, mock-up and design freeze.<br> Key Responsibilities Lead the interior design definition of hotel concepts from development brief to approved design direction, curating distinctive, emotive and commercially viable environments aligned with Qiddiya, district and Operator visions Articulate and position design proposals through compelling narratives, visuals and presentations to secure alignment and timely outcomes across governance and investment stages Define interior design principles, narratives, material strategies and signature elements for each hotel tier, establishing consistent and distinctive design baselines across the portfolio Oversee consultant briefing and scope definition, validating interior design scope, specialist inputs and FF&amp;E requirements to ensure alignment with design intent, Operator standards and governance approvals Oversee visualisation and design communication (including CGI strategy), ensuring concepts are clearly articulated and aligned with design narratives and stakeholder expectations Lead and govern interior design and specialist consultants, driving strategic approaches on appointment, scope and deliverables and overseeing performance, quality and creative alignment Provide functional governance to project-embedded design management teams, reviewing and endorsing interior design deliverables to ensure approved design intent is maintained through delivery Lead structured review of design submissions across key milestones, providing clear feedback and endorsement to support design progression Lead technical input to development briefs and coordinate across disciplines, embedding experiential intent across layouts, guest journeys, FF&amp;E and key touchpoints Oversee FF&amp;E strategies and specifications, ensuring commercial alignment, procurement integration and consistency with design intent and Operator requirements Lead mock-up and design validation processes, defining mock-up briefs, guiding inspections and ensuring quality through to design freeze Provide creative and technical design oversight through design and construction, resolving interfaces and deviations to maintain quality and design integrity Guide value engineering and design optimisation, balancing design intent with guest experience, cost, programme and operational requirements Champion innovation in guest experience, materials and sensory design, embedding ESG and Vision 2030 priorities Mentor teams and drive continuous improvement of design processes, standards and best practices across the portfolio Skills &amp; Attributes Required Strong interior design literacy, creative judgement and design review capability across all project stages Deep understanding of creative and technical hospitality design, including guest experience, spatial planning, materials, lighting and FF&amp;E specification Exceptional storytelling and visual communication, translating design narratives into compelling presentations and concept outputs Ability to manage design consultants and influence creative outcomes Commercial awareness of cost and programme impacts as well as FF&amp;E budgets, procurement timelines and value engineering trade-offs Strong stakeholder management and creative leadership, articulating design intent to secure alignment and drive decision-making Proficiency in design and coordination tools (e.<br>g. Adobe Creative Cloud, SketchUp, Revit, BIM, CDE platforms, Aconex, Autodesk Construction Cloud etc.<br>) Preferred Background &amp; Experience Experience in a senior creative leadership role (Design Director, Studio Director or equivalent) within a leading design practice or developer environment Proven track record delivering hospitality assets, including luxury and ultra luxury tiers Experience managing interior design consultants across multiple projects Experience managing FF&amp;E strategies, specification development and mock-up programmes Strong experience presenting design concepts and narratives to senior stakeholders Experience working with international hotel Operators and brand standards Experience in KSA / GCC or similar large-scale development environments preferred Qualifications Bachelor’s degree in Interior Design, Interior Architecture or related discipline Professional Certifications (if required) Professional membership or recognised certification preferred (e.<br>g. RIBA, NCIDQ, BIID or equivalent) Years of Experience 15+ years’ experience in interior design, with strong hospitality focus and senior creative leadership experience</span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>perform maintenance on auto vehicles such as oil, fluid and tire changes, wheel balancing &amp; assist our more experienced auto mechanics with more complicated repairs Responsibilities Raise vehicles, using hydraulic jacks. Operate cranes, hoists, or other moving or lifting equipment. Remount wheels onto vehicles. Unbolt and remove wheels from vehicles, using lug wrenches or other hand or power tools. Remove parts or components from vehicles. Place wheels on balancing machines to determine counterweights required to balance wheels. Test mechanical equipment to ensure proper functioning. Identify tire size and ply and inflate tires accordingly. Replace valve stems and remove puncturing objects. Hammer required counterweights onto rims of wheels. Assemble mechanical components or machine parts. Seal punctures in tubeless tires by inserting adhesive material and expanding rubber plugs into punctures, using hand tools. Reassemble tires onto wheels. Reassemble equipment after repair Inspect tire casings for defects, such as holes or tears. Inspect mechanical components of vehicles to identify problems. Locate punctures in tubeless tires by visual inspection or by immersing inflated tires in water baths and observing air bubbles. Inspect mechanical components of vehicles to identify problems. Glue tire patches over ruptures in tire casings, using rubber cement. Assist mechanics and perform various mechanical duties, such as changing oil or checking and replacing batteries. Rotate tires to different positions on vehicles, using hand tools. Install vehicle parts or accessories Clean and tidy up the shop. Buff defective areas of inner tubes, using scrapers. Smooth surfaces of objects or equipment Order replacements for tires or tubes. Order materials, supplies, or equipment . Prepare rims and wheel drums for reassembly by scraping, grinding, or sandblasting. Apply rubber cement to buffed tire casings prior to vulcanization process. Separate tubed tires from wheels, using rubber mallets and metal bars or mechanical tire changers. Disassemble equipment for maintenance or repair. Inspect mechanical components of vehicles to identify problems. Place tire casings and tread rubber assemblies in tire molds for the vulcanization process and exert pressure to ensure good adhesion. Drive automobile or service trucks to industrial sites to provide services or respond to emergency calls. Drive trucks or other vehicles to or at work sites Clean sides of whitewall tires Clean equipment, parts, or tools to repair or maintain them in good working order . Qualification vocational diploma or equivalent. Required Experiences 2 years Minimum Requirements mechanical aptitude and skill set in car maintenance Ability to perform day-to-day physical tasks Competencies Accountability Adaptability Collaboration Communication Results Orientation Emotional Intelligence </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Candidate Profile</strong></p><p></p></section>

<h3 >About KBR and the Valve Technician II Role</h3> <p >KBR, Inc. is a global company committed to improving the world responsibly and safely, fostering a diverse workforce where expertise thrives on creativity, resourcefulness, and collaboration. We are seeking a <strong >Valve Technician II</strong> to join our team in Rabigh, Makkah, Saudi Arabia. This full-time position requires 5-10 years of relevant experience and focuses on maintaining rotating equipment and mechanical systems.</p> <h3 >Role Overview and Operational Focus</h3> <p >The Valve Technician II plays a crucial role in ensuring the optimal condition and performance of rotating equipment. This involves comprehensive installation, maintenance, and repair activities for both rotating equipment and mechanical systems, adhering strictly to established standards. The role also encompasses supervisory and coordination duties to ensure efficient workflow and compliance within maintenance operations.</p> <h3 >Key Operational Responsibilities</h3> <ul > <li >Allocate maintenance activities to various Technicians and assemble the team.</li> <li >Supervise all ongoing jobs and provide progress updates to the Foreman.</li> <li >Organize manpower resources, equipment, and materials availability for tasks.</li> <li >Arrange necessary work permits prior to the commencement of work.</li> <li >Provide technical advice to Technicians on the proper use of tools and equipment.</li> <li >Coordinate with Operations, Maintenance Planning, and Technical departments to execute and complete jobs effectively.</li> <li >Ensure that SAP data input, history, and actual hours are accurately maintained.</li> <li >Attend daily and weekly maintenance progress meetings.</li> </ul> <h3 >Compliance and Safety Standards</h3> <ul > <li >Maintain strict compliance with SATORP standards and guidelines in all activities.</li> <li >Ensure adherence to safe work practices, hazardous work regulations, and proper Personal Protective Equipment (PPE) usage according to SATORP standards.</li> <li >Encourage the reporting of Near Miss incidents, unsafe conditions, and acts to promote a proactive safety culture.</li> <li >Participate actively in Safety audits.</li> <li >Attend scheduled Safety and Technical training sessions.</li> </ul> <h3 >Required Qualifications and Experience</h3> <p >Candidates for the Valve Technician II position should possess <strong >5-10 years of experience</strong> in maintaining, installing, and repairing rotating equipment and mechanical systems. Demonstrated ability to supervise technicians, organize resources, and ensure compliance with operational and safety standards is essential for success in this role.</p> <h3 >Location and Work Type</h3> <p >This <strong >full-time</strong> position is based in <strong >Rabigh, Makkah, Saudi Arabia</strong>. KBR values a collaborative and safety-conscious work environment. We invite qualified candidates to apply.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>1. Installing, maintaining &amp; repairing electrical systems, including input/output networks, variable speed drives &amp; process control equipment for Waste water treatment</p><p>2. Diagnosing &amp;Repairing faults in PLC systems equipment &amp; minimizing downtime .</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum of 2 years in PLC programming and electrical panel installation work</p><p>Diploma in Electrical Engineering</p><p>Accommodation &amp; Transport</p><p></p></section>