Equipment operator Jobs

<ul><li>Safely operate a boom truck to lift, move, and position heavy materials at construction sites, ensuring load stability and adherence to lift plans.</li><li>Perform pre-trip and post-trip inspections of the boom truck and its equipment, documenting any defects and ensuring operational readiness.</li><li>Navigate various job sites, including rough terrain and congested areas, while maintaining situational awareness to prevent accidents.</li><li>Communicate effectively with ground crew, signal persons, and site supervisors using hand signals or radio communication to coordinate lifts.</li><li>Read and interpret load charts, engineering plans, and site schematics to determine safe lifting capacities and operating procedures.</li><li>Maintain accurate daily logs, including mileage, fuel consumption, work performed, and any incidents or delays encountered.</li><li>Ensure all loads are properly secured and balanced before and during transport and lifting operations.</li><li>Adhere strictly to all company safety policies, OSHA regulations, and local traffic laws, reporting any unsafe conditions immediately.</li><li>Perform routine maintenance on the boom truck, such as checking fluid levels, tire pressure, and lubrication, to ensure optimal performance.</li><li>Respond to emergency situations calmly and professionally, following established protocols for accidents or equipment malfunctions.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Possess a valid Commercial Driver's License (CDL) Class A or B with a clean driving record.</li><li>Hold a current OSHA 10 or OSHA 30 certification for construction safety.</li><li>Have a minimum of 3 years of verifiable experience operating boom trucks in a similar industry (e.g., construction, utilities, heavy lifting).</li><li>Demonstrate proficiency in reading and understanding load charts and lift plans.</li><li>Exhibit strong mechanical aptitude for performing basic maintenance and identifying equipment issues.</li><li>Possess excellent hand-eye coordination and spatial reasoning abilities for precise operation.</li><li>Be physically capable of climbing in and out of the truck, standing for extended periods, and lifting moderate weight.</li><li>Communicate clearly and effectively in English, both verbally and in writing.</li><li>Show a strong commitment to safety protocols and a proactive approach to risk management.</li><li>Be willing to work flexible hours, including occasional evenings, weekends, and overtime as project demands require.</li></ul>

Job Title: Maintenance Manager Company: Wadi Fatima Foodstuff Trading Establishment Wadi Fatima Foodstuff Trading Establishment is looking for an experienced Maintenance Manager to oversee our mechanical and electrical systems, ensuring seamless operational performance across our production facilities. Key Responsibilities: Establish and execute preventive and predictive maintenance plans for all food and dairy processing equipment. Troubleshoot emergency equipment failures promptly to minimize production downtime. Oversee thermal processing, packaging, and filling lines specific to dairy manufacturing. Lead, schedule, and mentor the technical maintenance team. Manage spare parts inventory and maintain cost-effective maintenance operations. Requirements & Qualifications: Bachelor's degree in Engineering (Mechanical, Electrical, or related field). Proven track record in maintenance management within food manufacturing plants, with strong preference given to dairy industry experience. Thorough understanding of automated machinery and processing systems used in dairy production. Strong strategic planning, problem-solving, and technical troubleshooting abilities

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible for providing comprehensive nursing care utilizing the nursing process and meeting the established standard of nursing practice and performance. Responsible for providing comprehensive nursing care in the clinics or the emergency department. Provides patient care as assigned according to the established policies and evidence-based practice. Documents all relevant information correctly, appropriately, and in a timely manner. Ensuring the clinic is ready for effective use by the physician (from consumable material stock level and medical equipment standpoint)</p><p>Accountabilities</p><ul><li>Comply with all policies, procedures, clinical protocols, standards, and guidelines based on legislation, evidence-based nursing practice.</li><li>Reports equipment failures, safety, and security issues, and/or reduction of supply inventory to nurse supervisor.</li><li>Acts as an advocate for patients and families.</li><li>To co-operate and work effectively with other professionals in the multi-disciplinary team to ensure continuity of care.</li><li>Complies with policies for personal and patient safety and for the prevention of healthcare associated infections.</li><li>Promotes a safe environment and safe patient care by embracing a safety culture.</li><li>Contributes to the achievement of clinical quality outcome indicators and patient satisfaction.</li><li>Participates in self education, training and development, as applicable.</li><li>Contributes to the achievement of cost efficiency savings on unit.</li><li>Maintains an awareness of resource utilization, exercising care in the ordering and use of staff, equipment, and materials.</li><li>Completes the nursing assessment and documents medical history from patient.</li><li>Adhere to the Medicines Management for the safe keeping and administration of medication.</li><li>The employee s duties are not limited to the above-mentioned accountabilities. The manager can assign other duties based on the business need.</li></ul><p><br></p><ul><li><br></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Job Requirements</h2><p>Education</p><ul><li>Bachelor s or Associate Degree/Diploma in Nursing is required</li><li>SCHS license is required</li></ul><p>Experience</p><ul><li>2 years of clinical experience following the degree.</li><li>No experience is required for Saudis with Bachelor s Degree.</li></ul><p>Computer Skills</p><ul><li>Healthcare Information System</li></ul><p>Languages</p><ul><li>English and Arabic (fluent speaking)</li></ul><p>Other Requirements(Certificates)</p><ul><li>Current Registered Nurse Licensure from country of origin and Saudi Commission for Health Specialties Licensure is required.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Complete inventory of uniforms and linens. Conduct monthly inventory of laundry supplies. Report faulty equipment, maintenance needs, and safety hazards to manager/supervisor. Train employees on all laundry procedures, including safety procedures and equipment operation. Verify that laundry requests are completed for each department as needed. Operate and monitor washing, dry cleaning, and drying machinery. Inspect linens and terry for damage. Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Speak with others using clear and professional language; prepare and review written documents accurately and completely. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Visually inspect tools, equipment, or machines (e.g., to identify defects). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. . Move through narrow, confined, or elevated spaces. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Education: High school diploma or G.E.D. equivalent.</li><li>Related Work Experience: At least 1 year of related work experience.</li><li>Supervisory Experience: At least 1 year of supervisory experience.</li><li>License or Certification: None</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Position Overview</b></p><p>The Denter is responsible for repairing damaged vehicle body panels and structural components to restore vehicles to manufacturer and company quality standards. The role requires expertise in dent removal, panel repair, alignment correction, and body restoration while ensuring safety, efficiency, and customer satisfaction.</p><p><br></p><p><b>Key Responsibilities</b></p><ul><li>Inspect vehicles to assess body damage and determine repair requirements.</li><li>Repair dents, damaged panels, and structural body components using approved repair methods and tools.</li><li>Remove, repair, and replace damaged vehicle parts including doors, fenders, bumpers, quarter panels, and hoods.</li><li>Perform panel beating, welding, grinding, cutting, and metal shaping activities as required.</li><li>Ensure all repairs are completed according to OEM standards, safety requirements, and company quality expectations.</li><li>Conduct body alignment and structural correction using specialized workshop equipment.</li><li>Coordinate with Paint Technicians and Service Advisors to ensure smooth workflow and timely vehicle delivery.</li><li>Identify hidden damages and communicate additional repair requirements to the supervisor.</li><li>Maintain workshop tools and equipment in good operating condition.</li><li>Follow all workshop safety procedures, environmental regulations, and housekeeping standards.</li><li>Support workshop productivity, efficiency targets, and customer satisfaction objectives.</li></ul><p><br></p><p><b>Skills</b></p><p><b>Technical Skills</b></p><ul><li>Knowledge of automotive body repair and denting techniques.</li><li>Experience using welding machines, dent pulling systems, and body alignment equipment.</li><li>Ability to interpret repair manuals, estimates, and technical instructions.</li><li>Understanding of vehicle structural repair standards and safety procedures.</li><li>Familiarity with modern automotive repair technologies and workshop practices.</li></ul><p><b>Personal Skills</b></p><ul><li>Attention to detail and quality-focused mindset.</li><li>Strong problem-solving and troubleshooting abilities.</li><li>Ability to work under pressure and meet deadlines.</li><li>Good teamwork and communication skills.</li><li>Strong organizational and time management skills.</li></ul><p><b>Minimum Qualifications</b></p><ul><li>High school diploma or technical certification in Automotive Body Repair preferred.</li><li>Minimum 3 years of experience in automotive denting/body repair.</li><li>Experience working on premium or electric vehicles is considered an advantage.</li><li>Basic English communication skills; Arabic is a plus.</li><li>Valid driving license preferred.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Attention to detail and quality-focused mindset.</li><li>Strong problem-solving and troubleshooting abilities.</li><li>Ability to work under pressure and meet deadlines.</li><li>Good teamwork and communication skills.</li><li>Strong organizational and time management skills.</li></ul></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>FAENA The Red Sea is seeking a motivated and service-oriented Public Area Supervisor to join our Housekeeping team. This role is responsible for overseeing the cleanliness, presentation, and maintenance of all public areas throughout the resort, ensuring they consistently reflect the luxury standards of the FAENA brand. The Public Area Supervisor will lead and support the Public Area Attendants, ensuring exceptional cleanliness, safety, and guest satisfaction while creating memorable first impressions for guests and visitors.</p><p>Key Responsibilities</p><ul><li>Supervise the daily operations of the Public Area team.</li><li>Ensure all public areas are maintained to the highest standards of cleanliness and presentation.</li><li>Conduct regular inspections of guest and back-of-house public areas.</li><li>Assign daily tasks and monitor team performance to ensure quality standards are achieved.</li><li>Train, coach, and support Public Area Attendants in cleaning procedures and service standards.</li><li>Ensure all cleaning schedules and deep-cleaning programs are completed effectively.</li><li>Monitor inventory levels of cleaning supplies and equipment.</li><li>Ensure proper use, maintenance, and storage of cleaning equipment and chemicals.</li><li>Report maintenance issues and safety hazards promptly.</li><li>Support VIP arrivals, special events, and seasonal activations.</li><li>Ensure compliance with health, safety, hygiene, and environmental standards.</li><li>Conduct shift briefings and communicate operational priorities.</li><li>Assist with team scheduling, attendance monitoring, and workforce planning.</li><li>Handle guest requests and concerns professionally and efficiently.</li><li>Collaborate with Engineering, Security, and operational departments to maintain exceptional public spaces.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Previous experience in Housekeeping, Public Area Operations, or a similar hospitality role preferred.</li><li>Supervisory experience is advantageous.</li><li>Strong attention to detail and commitment to cleanliness standards.</li><li>Good leadership and team management skills.</li><li>Strong communication and interpersonal abilities.</li><li>Ability to organise workloads and prioritise tasks effectively.</li><li>Knowledge of cleaning procedures, equipment, and safety standards.</li><li>Positive attitude with a strong guest service mindset.</li><li>Ability to work flexible shifts, weekends, and public holidays.</li><li>Proficiency in basic computer applications is advantageous.</li><li>Passion for hospitality and creating exceptional guest experiences.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Providing first response, interacting with the school representative on daily basis. Record building's Cooling Temperature level and Hot water Temperature level on a daily basis. To operate and monitor the BMS system on a daily basis. Report any abnormal readings or issues. Daily Monitoring, Fire Alarm systems, Firefighting systems, HVAC systems, Electrical systems, Plumbing systems, Low current systems, Building &amp; Fabric, Sports field equipment s and include all associated system equipment s. Perform facility inspections and report on condition affecting operations. Promptly respond to emergencies. Coordinate with building representative raise complaint through CAFM system and ensure the problem solved by on time. Record electrical and water consumption on a daily hourly basis or as per Management requirement. Daily monitoring of the level of the domestic water tank and septic water tank. Domestic water tank low level need to report line manager and coordinate with water supply service provider to arrangement of refilling water. Septic water tank high level need to report line manager and coordinate with Septic water tank disposal service provider to arrangement of emptying septic water tank. Respond to facility and equipment alarms and system failures. Perform light reactive maintenance and predictive maintenance on facility mechanical, electrical, and other installed systems. Site inspection &amp; condition survey, cleaning inspection done on daily basis. Coordinate with safety team to fire drill each month and provide the report to line manager. MPH and main buildings any events need to arrangement of sound systems, master clock system, air conditioning schedule. Follow up with reactive team to close the activities on time.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>About you</h2><p>Education: A diploma or degree in Facilities Management, Engineering, Business Administration, or a related field.</p><p>Technical Skills: Working knowledge of general maintenance methods, building automation systems, and facility management software.</p><p>Soft Skills: Strong multitasking, problem-solving abilities, and the capacity to react quickly during facility emergencies.</p><p>Language Proficiency: English (also Arabic preferred).</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>FAENA The Red Sea is seeking an energetic and dependable Housekeeping Runner (Saudi National) to join our Housekeeping team. This role plays a vital part in supporting the day-to-day operation of the department by ensuring housekeeping supplies, linen, amenities, and equipment are delivered efficiently throughout the resort. Working closely with Room Attendants, Public Area Attendants, Laundry, and other operational teams, the Housekeeping Runner helps maintain the exceptional standards of cleanliness, organisation, and service that define the FAENA experience.</p><p>Key Responsibilities</p><ul><li>Deliver linen, towels, amenities, and housekeeping supplies to guest floors and operational areas.</li><li>Restock housekeeping pantries, storage rooms, and service areas throughout the shift.</li><li>Assist with the movement and distribution of clean linen across the resort.</li><li>Collect soiled linen and waste from designated areas.</li><li>Support Room Attendants and Public Area Attendants with operational requests.</li><li>Maintain cleanliness and organisation of pantries, corridors, storage rooms, and back-of-house areas.</li><li>Assist with deep-cleaning projects and special housekeeping initiatives.</li><li>Support guest room preparation and turndown operations as required.</li><li>Respond promptly to housekeeping and guest requests.</li><li>Monitor stock levels and report shortages to supervisors.</li><li>Assist in tracking and organising linen and housekeeping inventories.</li><li>Report maintenance issues, damaged equipment, and safety concerns promptly.</li><li>Ensure housekeeping equipment and supplies are stored safely and correctly.</li><li>Follow health, safety, and hygiene standards at all times.</li><li>Work collaboratively with Housekeeping, Laundry, Engineering, and other departments to ensure smooth operations.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School Diploma or equivalent.</li><li>Previous experience in Housekeeping, Hospitality, Customer Service, or a similar role is preferred.</li><li>Good organisational and time management skills.</li><li>Ability to work efficiently in a fast-paced environment.</li><li>Strong teamwork and communication skills.</li><li>Basic understanding of housekeeping operations is advantageous.</li><li>Physically able to lift, carry, and move supplies throughout the shift.</li><li>Positive attitude and willingness to support operational needs.</li><li>Attention to detail and commitment to cleanliness standards.</li><li>Flexibility to work shifts, weekends, and public holidays as required.</li><li>Passion for hospitality and delivering exceptional guest experiences.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry.</p><p><b>Job Duties</b></p><p>Under general supervision, provides technical assistance and analysis during planning and execution of frac and acid treatments based on subsurface, rock mechanics, and fluid mechanics knowledge. From the wellsite, works to analyze pressure while pumping based on surface and subsurface properties and able to execute and analyze diagnostic pumping techniques. Understands fluid systems and reactions based on subsurface properties. Develops relationships with internal and external customers to meet requirements, manage expectations, recommend and carry out on the job changes from the wellsite. Collaborates with operations and Business Development teams to provide efficient execution of jobs. Works with service coordinators to verify equipment and material for pre-job preparation. Completes pre job fluid testing and analysis. Provides technical documentation during and at the end of the job to Business Development and customers. Validates end of job packet as per internal processes. Completes projects surrounding basic engineering principles, job design and execution. Understands and aids technology teams in the roll out of new technologies, both surface and subsurface. Understands PSL specific equipment, and equipment requirements based on job design. Able to operate on the job monitoring software and provide assistance for customer remote viewing operations (RTO). Assists with development of Associate Technical Professionals. Skills typically developed as an Associate Technical Professional Frac/Acid or Sand Control.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Completion of an undergraduate degree in a STEM (Science, Technology, Engineering, Mathematics) discipline and at least 1 year of experience in PE operations / engineering is required. This is a majority field-based role.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><div> <p> <strong>POSITION SUMMARY</strong> </p> <p> </p> <p>Wipe down fitness center machines and remove towels, trash, and debris from fitness center area. Maintain an adequate supply of cups and water in recreation area. Clean fitness and recreation area restrooms and showers. Obtain, fold, and stack towels according to company procedures. Distribute lockers and towels to guests. Conduct inventory of supplies, materials, and equipment and inform supervisor/manager of low supply items. Provide information to guests about available recreation facilities and activities. Promote a fun and relaxing atmosphere for guests. Promote the rules and regulations of the recreation facility intended for the safety and welfare of guests and members. Provide assistance to injured guests until the arrival of emergency medical services. Promote the rules and regulations of the recreation facility.</p> <p> </p> <p>Report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Follow company policies and procedures; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Welcome and acknowledge all guests according to company standards; anticipate and address guests service needs; assist individuals with disabilities; thank guests with genuine appreciation. Speak with others using clear and professional language; answer telephones using appropriate etiquette. Develop and maintain positive working relationships with others. Comply with quality assurance expectations and standards. Visually inspect tools, equipment, or machines (e.g., to identify defects). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Move over sloping, uneven, or slippery surfaces. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested.</p> <p> </p> <p>PREFERRED QUALIFICATIONS</p> <p>Education: High school diploma or G.E.D. equivalent.</p> <p>Related Work Experience: No related work experience.</p> <p>Supervisory Experience: No supervisory experience.</p> <p> </p> <p>REQUIRED QUALIFICATIONS</p> <p>License or Certification: CPR Certification</p> <p>First Aid Certification</p> <p>Fitness Equipment</p> <p>Any certification or training required by local and state agencies.</p> <p> </p> <p> </p> </div> <div> </div> <p><br></p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><div> <p> <strong>POSITION SUMMARY</strong> </p> <p> </p> <p>Install, configure, manage, maintain, test, evaluate, and repair computer networks, workstations, support server system(s), supporting hardware/software, user accounts, and computer/telephone rooms. Train/instruct users in proper use and security of all systems. Troubleshoot/repair/resolve technical problems/issues related to computer hardware/software/LAN and WAN/internet. Respond to program error messages. Provide network communications support and technical guidance. Refer major problems to vendors/technicians. Analyze, recommend, and implement process improvements. Consult with others to assess/analyze/resolve computing needs and system requirements. Inspect, test, and diagnose computer equipment/systems. Plan and coordinate information technology-related equipment installations, moves, additions, changes, and system enhancements. Plan, coordinate, and implement network security measures. Provide end-user support for all applications. Plan and manage disk space for entire network. Maintain accurate inventory of all technological devices. Enter commands and activate controls on computers and equipment. Ensure backup tapes are locked in a fireproof safe.</p> <p> </p> <p>Follow all company policies and procedures, report accidents, injuries, and unsafe work conditions to manager. Maintain confidentiality of proprietary information; protect company assets. Address guests service needs; assist other employees. Speak with others using clear and professional language; answer telephones using appropriate etiquette. Serve as role model and first point of contact of the Guarantee of Fair Treatment/Open Door Policy process. Develop and maintain positive working relationships with others; support team to reach common goals. Ensure adherence to quality expectations/standards; identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds. Stand, sit, or walk for extended periods of time. Enter and locate information using computers/ Point of Sale (POS) systems. Move up and down stairs/ramps. Perform other reasonable job duties as requested by Supervisors.</p> <p> </p> <p><b>PREFERRED QUALIFICATIONS</b></p> <p>Education: Technical, Trade, or Vocational School Degree.</p> <p>Related Work Experience: At least 2 years of related work experience.</p> <p>Supervisory Experience: No supervisory experience.</p> <p>License or Certification: None</p></div></div></section>

<p>Duties and Responsibilities: Perform routine, preventive, and emergency mechanical maintenance work in accordance with approved policies and procedures. Monitor the performance of production units and ensure they operate within designated operational limits, reporting any observations that may affect equipment efficiency. Identify the tools and equipment required for maintenance, assess their readiness, and carry out preventive maintenance to ensure their continuous availability. Organize and store maintenance tools in their designated locations, maintain them properly, and ensure proper disposal of maintenance waste. Carry out mechanical repair work such as welding, cutting, and refurbishing replaced parts to ensure their readiness and efficiency. Comply with safety procedures before starting work, including verifying the necessary permits and lockout/tagout forms. Perform any other tasks assigned by the direct supervisor.</p><p><strong>Desired Candidate Profile</strong></p><p>Required Qualifications: Diploma in Mechanical Engineering or any related field.</p>

<p>Duties and Responsibilities: Perform routine, preventive, and emergency mechanical maintenance work in accordance with approved policies and procedures. Monitor the performance of production units and ensure they operate within designated operational limits, reporting any observations that may affect equipment efficiency. Identify the tools and equipment required for maintenance, assess their readiness, and carry out preventive maintenance to ensure their continuous availability. Organize and store maintenance tools in their designated locations, maintain them properly, and ensure proper disposal of maintenance waste. Carry out mechanical repair work such as welding, cutting, and refurbishing replaced parts to ensure their readiness and efficiency. Comply with safety procedures before starting work, including verifying the necessary permits and lockout/tagout forms. Perform any other tasks assigned by the direct supervisor.</p><p><strong>Desired Candidate Profile</strong></p><p>Required Qualifications: Diploma in Mechanical Engineering or any related field.</p>

<p>Duties and Responsibilities: Perform routine, preventive, and emergency mechanical maintenance work in accordance with approved policies and procedures. Monitor the performance of production units and ensure they operate within designated operational limits, reporting any observations that may affect equipment efficiency. Identify the tools and equipment required for maintenance, assess their readiness, and carry out preventive maintenance to ensure their continuous availability. Organize and store maintenance tools in their designated locations, maintain them properly, and ensure proper disposal of maintenance waste. Carry out mechanical repair work such as welding, cutting, and refurbishing replaced parts to ensure their readiness and efficiency. Comply with safety procedures before starting work, including verifying the necessary permits and lockout/tagout forms. Perform any other tasks assigned by the direct supervisor.</p><p><strong>Desired Candidate Profile</strong></p><p>Required Qualifications: Diploma in Mechanical Engineering or any related field.</p>

<p>Duties and Responsibilities: Perform routine, preventive, and emergency mechanical maintenance work in accordance with approved policies and procedures. Monitor the performance of production units and ensure they operate within designated operational limits, reporting any observations that may affect equipment efficiency. Identify the tools and equipment required for maintenance, assess their readiness, and carry out preventive maintenance to ensure their continuous availability. Organize and store maintenance tools in their designated locations, maintain them properly, and ensure proper disposal of maintenance waste. Carry out mechanical repair work such as welding, cutting, and refurbishing replaced parts to ensure their readiness and efficiency. Comply with safety procedures before starting work, including verifying the necessary permits and lockout/tagout forms. Perform any other tasks assigned by the direct supervisor.</p><p><strong>Desired Candidate Profile</strong></p><p>Required Qualifications: Diploma in Mechanical Engineering or any related field.</p>

<p>Duties and Responsibilities: Perform routine, preventive, and emergency mechanical maintenance work in accordance with approved policies and procedures. Monitor the performance of production units and ensure they operate within designated operational limits, reporting any observations that may affect equipment efficiency. Identify the tools and equipment required for maintenance, assess their readiness, and carry out preventive maintenance to ensure their continuous availability. Organize and store maintenance tools in their designated locations, maintain them properly, and ensure proper disposal of maintenance waste. Carry out mechanical repair work such as welding, cutting, and refurbishing replaced parts to ensure their readiness and efficiency. Comply with safety procedures before starting work, including verifying the necessary permits and lockout/tagout forms. Perform any other tasks assigned by the direct supervisor.</p><p><strong>Desired Candidate Profile</strong></p><p>Required Qualifications: Diploma in Mechanical Engineering or any related field.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>&nbsp;We are seeking a skilled <strong>&nbsp;Fabricator </strong><b>Welder </b>to repair and maintain heavy-duty vehicles and equipment. The ideal candidate will have experience in welding, metal fabrication, and structural repairs, ensuring high-quality workmanship and adherence to safety standards.</p> <p><strong>Key Responsibilities:</strong></p> <ul> <li>Repair cracked chassis and other structural components of trucks and heavy equipment.</li> <li>Fabricate metal parts, brackets, and components as required.</li> <li>Perform welding operations using MIG and ARC welding techniques.</li> <li>Repair and restore truck bodies, trailers, and related attachments.</li> <li>Follow all welding safety procedures and company safety standards.</li> <li>Inspect completed welds to ensure quality, strength, and durability.</li> </ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul> <li>Skilled in ARC and MIG welding techniques.</li> <li>Experience working with heavy vehicle structures and components.</li> <li>Strong metal fabrication and repair abilities.</li> <li>Ability to inspect weld quality and ensure structural integrity.</li> <li>Knowledge of welding safety standards and procedures.</li> </ul></div>

<p>Duties and Responsibilities: Perform routine, preventive, and emergency mechanical maintenance work in accordance with approved policies and procedures. Monitor the performance of production units and ensure they operate within designated operational limits, reporting any observations that may affect equipment efficiency. Identify the tools and equipment required for maintenance, assess their readiness, and carry out preventive maintenance to ensure their continuous availability. Organize and store maintenance tools in their designated locations, maintain them properly, and ensure proper disposal of maintenance waste. Carry out mechanical repair work such as welding, cutting, and refurbishing replaced parts to ensure their readiness and efficiency. Comply with safety procedures before starting work, including verifying the necessary permits and lockout/tagout forms. Perform any other tasks assigned by the direct supervisor.</p><p><strong>Desired Candidate Profile</strong></p><p>Required Qualifications: Diploma in Mechanical Engineering or any related field.</p>

<p>Duties and Responsibilities: Perform routine, preventive, and emergency mechanical maintenance work in accordance with approved policies and procedures. Monitor the performance of production units and ensure they operate within designated operational limits, reporting any observations that may affect equipment efficiency. Identify the tools and equipment required for maintenance, assess their readiness, and carry out preventive maintenance to ensure their continuous availability. Organize and store maintenance tools in their designated locations, maintain them properly, and ensure proper disposal of maintenance waste. Carry out mechanical repair work such as welding, cutting, and refurbishing replaced parts to ensure their readiness and efficiency. Comply with safety procedures before starting work, including verifying the necessary permits and lockout/tagout forms. Perform any other tasks assigned by the direct supervisor.</p><p><strong>Desired Candidate Profile</strong></p><p>Required Qualifications: Diploma in Mechanical Engineering or any related field.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under strict supervision, learns basic GeoBalance Applications operations through preparation of equipment for installation and services. Assists in the rigging up and down of GeoBalance Applications service line equipment, on work locations both on and offshore. Assists in the running of a job, clean up, repair, and preparation of the next job. Learns to monitor instruments and perform necessary calculations to assure quality of the data at the well. Must have successfully passed company tests and met competency requirements. The ability to perform basic mathematical calculations is required. Reading comprehension and writing skills are required. Skills are acquired through completion of a high school diploma. Previous experience is not required.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School/Secondary</li><li>The ability to perform basic mathematical calculations is required.</li><li>Reading comprehension and writing skills are required.</li><li>Previous experience is not required.</li></ul><p></p></section>