Embedded Systems Engineer Jobs - Taif Saudi
28 Jobs Found
Save and set alert for similar positionsManage alerts
Saudi - Taif
<p>An agricultural engineer is required to be responsible for everything in a greenhouse farm</p>
Saudi - Taif
<p><strong>Overview</strong></p><p>We are looking for an <strong>Automotive Electrician</strong> to join our maintenance team, where they will be responsible for inspecting, diagnosing, and repairing electrical and electronic faults in cars. We are looking for a technician with good practical experience in automotive electrical systems, capable of using diagnostic tools and handling the electrical and electronic systems of modern vehicles.</p><p><strong>Key Responsibilities and Duties</strong></p><ul><li>Inspect and diagnose electrical and electronic system faults in cars using diagnostic tools.</li><li>Repair and maintain starting circuits, batteries, charging systems, lighting, and safety systems.</li><li>Inspect and repair various sensors and electronic systems in the vehicle.</li><li>Diagnose faults related to Electronic Control Units (ECU) in coordination with appropriate diagnostic systems.</li><li>Install and wire electrical additions and accessories for cars.</li><li>Inspect wiring, connections, and electrical circuits to identify and repair faults.</li><li>Perform necessary tests after repairs to ensure the safety and efficiency of electrical systems.</li><li>Maintain work tools and equipment and adhere to safety procedures while performing maintenance work.</li></ul><p><strong>Qualifications and Requirements</strong></p><ul><li>Technical qualification or diploma in electricity, automotive mechanics, or a related field.</li><li>Practical experience in the field of automotive electricity and maintenance.</li><li>Experience in dealing with various modern car models.</li><li>Good knowledge of automotive electrical circuits and the ability to read electrical diagrams.</li><li>Ability to use car diagnostic and fault-finding tools.</li><li>Experience in dealing with hybrid and electric vehicles is preferred.</li><li>Ability to identify faults and perform appropriate repairs accurately.</li></ul><p><strong>Required Skills</strong></p><ul><li>Good troubleshooting and problem-solving skills.</li><li>Accuracy and attention to detail.</li><li>Ability to work independently and as part of a team.</li><li>Commitment to occupational safety procedures.</li><li>Ability to work under pressure and adhere to maintenance deadlines.</li><li>Good communication skills in dealing with customers and colleagues.</li></ul><p><strong>Benefits and Perks</strong></p><ul><li>Professional work environment.</li><li>Competitive salary based on experience and efficiency.</li><li>Continuous training and development in the field of automotive electricity.</li><li>Opportunities for professional growth and advancement based on performance.</li></ul><p> </p><p><strong>Overview</strong></p><p>We are looking for an experienced <strong>Automotive Electrician / Car Electrical Technician</strong> to join our maintenance team. The successful candidate will be responsible for inspecting, diagnosing, and repairing electrical and electronic faults in vehicles. We are looking for a practical technician with good experience in automotive electrical systems and the ability to use diagnostic equipment and work with modern vehicle technologies.</p><p><strong>Key Responsibilities and Duties</strong></p><ul><li>Inspect and diagnose electrical and electronic faults using diagnostic tools.</li><li>Repair and maintain starting systems, batteries, charging systems, lighting, and safety systems.</li><li>Inspect and repair various vehicle sensors and electronic systems.</li><li>Diagnose faults related to Electronic Control Units (ECUs) using appropriate diagnostic equipment.</li><li>Install and connect electrical accessories and additional vehicle equipment.</li><li>Inspect wiring, connections, and electrical circuits and identify and repair faults.</li><li>Perform necessary tests after repairs to ensure the proper and safe operation of electrical systems.</li><li>Maintain tools and equipment and follow all safety procedures during maintenance work.</li></ul><p><strong>Qualifications and Requirements</strong></p><ul><li>Technical diploma or vocational qualification in automotive electrical systems, automotive mechanics, or a related field.</li><li>Practical experience in automotive electrical maintenance.</li><li>Experience working with different modern vehicle models.</li><li>Good knowledge of automotive electrical circuits and the ability to read wiring diagrams.</li><li>Ability to use automotive diagnostic and fault-detection equipment.</li><li>Experience with hybrid and electric vehicles is preferred.</li><li>Ability to accurately diagnose faults and perform the required repairs.</li></ul><p><strong>Required Skills</strong></p><ul><li>Good troubleshooting and problem-solving skills.</li><li>Strong attention to detail and accuracy.</li><li>Ability to work independently and as part of a team.</li><li>Commitment to workplace safety procedures.</li><li>Ability to work under pressure and complete maintenance tasks on time.</li><li>Good communication and interpersonal skills.</li></ul><p><strong>Benefits and Perks</strong></p><ul><li>Professional work environment.</li><li>Competitive salary based on experience and skills.</li><li>Continuous training and development in automotive electrical systems.</li><li>Career growth opportunities based on performance.</li></ul>
Saudi - Taif
<p>Job Description – B2B Marketing Specialist for ERP Systems Job Title: B2B Marketing Specialist – ERP Systems and Technical Solutions</p><p>Department: Marketing</p><p>Reports to: Marketing Manager</p><p>Job Type: Full-time Job Objective: We are looking for a marketing specialist with a solid understanding of ERP systems and technical solutions, proficient in using AI tools for content writing, developing creative ideas, preparing design concepts, analyzing the market and competitors, and building marketing campaigns.</p><p> </p><p>The role is not limited to managing social media platforms; it requires a person capable of understanding the product and the market, and converting real customer problems into marketing messages and campaigns that help attract qualified leads. Tasks and Responsibilities First: Marketing for ERP Systems Understanding ERP systems and core modules such as: Accounting and Finance. Sales. Procurement. Inventory. Point of Sale (POS). Manufacturing. Human Resources. CRM. Reports and Dashboards. Understanding business problems and linking them to appropriate solutions within the system. Converting technical features into clear and understandable marketing benefits. Preparing targeted campaigns for businesses and B2B decision-makers. Studying the customer journey from the awareness stage to booking a demo or contacting sales. Second: Using AI in Content Writing Using AI tools to prepare and develop: Marketing posts. Ads. Scripts. Short videos. Landing pages. Campaign messages. Ideas, headlines, and hooks. Writing professional prompts to obtain accurate and usable results. Reviewing and improving AI-generated content and not relying on it directly without verification. Adapting content based on the audience, platform, and sector. Using AI to produce multiple marketing angles and choosing the strongest one based on the goal and audience. Third: AI in Design Using AI tools to develop ideas and visual concepts. Preparing professional prompts for advertising designs. The ability to describe: Visual composition. Focal point. Design style. Text distribution. Visual identity. Lighting and colors. Scene and output. Using AI tools to create an initial concept before handing it over to the designer. Evaluating the quality of AI-generated designs. Ensuring the design aligns with the brand identity. Collaborating with the designer to turn the idea into a professional output, rather than settling for an AI-generated image. Fourth: Market and Competitor Analysis Using AI Conducting preliminary market research for target sectors. Analyzing competitors, their products, and their marketing messages. Comparing: Prices. Benefits. Offers. Strengths and weaknesses. Advertising methods. Content. Target audience. Using AI tools to gather and analyze information and formulate conclusions. Discovering marketing opportunities and gaps in the market. Preparing brief reports showing: What are competitors doing? What are customers looking for? Where is the opportunity? How can the company's products be distinguished? Ensuring the accuracy of information and not relying on AI results without verification. Fifth: Content and Digital Campaigns Preparing monthly and weekly content plans. Writing marketing and advertising content. Proposing creative ideas and campaigns. Defining the target audience for each product. Contributing to the management of advertising campaigns. Preparing A/B tests for hooks, content, audience, and design. Analyzing and improving campaign results. Tracking indicators: CTR. CPC. CPL. Conversion Rate. Leads. Quality of potential customers. Sixth: Coordination with the Team Working with the Marketing Manager to execute the plan. Coordinating with designers and editors. Coordinating with the sales team to determine the quality of potential leads. Communicating with the technical team to understand new products and features. Converting technical information into simple and persuasive marketing messages. Required Skills Good understanding of ERP systems. Experience or knowledge of B2B marketing. Proficiency in using AI tools in marketing. High skill in Prompt Engineering. Ability to write strong marketing content. Ability to build advertising ideas and concepts. Good understanding of design principles and visual identity. Ability to study the market and competitors. Analytical thinking. Ability to read campaign data. Research and information verification skills. Time management and multitasking. Tools Preferred to Use It is preferred that the candidate has experience or a high aptitude for dealing with tools such as:</p><p> </p><p>AI and Content:</p><p>ChatGPT, Claude, Gemini, or similar tools.</p><p> </p><p>Design and AI:</p><p>Canva AI, Adobe Firefly, Midjourney, or similar generative and design tools.</p><p> </p><p>Marketing and Ads:</p><p>Meta Ads Manager, Google Ads, LinkedIn.</p><p> </p><p>Analysis:</p><p>Google Analytics, Looker Studio, and data analysis tools. Most Important Job Requirement We are not looking for someone who uses AI through copy-paste.</p><p> </p><p>We are looking for someone who knows how to:</p><p> </p><p>Research → Analyze → Write a correct Prompt → Compare results → Verify them → Improve them → Turn them into executable content or campaigns. Proposed Practical Test for the Candidate Before hiring, it is preferred to give the candidate a short test including:</p><p> </p><p>A quick study of a competitor in the ERP market. Identifying 3 problems faced by a specific sector such as factories. Writing 3 different advertising angles using AI. Preparing one marketing post. Writing a prompt for the ad design. Presenting a proposed visual concept for the design. Explaining the tools used and how the information was verified. KPIs Content quality. Quality of potential customers. Number of executable ideas and campaigns. Speed and quality of preparing marketing studies. Quality of using AI tools. Improving campaign performance. Lowering the cost of leads. Adherence to content and campaign plans. Ability to convert ERP features into clear business messages. Level of independence in executing marketing tasks. Ideal Candidate The right person for this job combines:</p><p> </p><p>Marketing + ERP + AI + Content + Design Thinking + Market Research + Data Analysis</p><p> </p><p>And uses AI as a tool to accelerate work and raise quality, not as a substitute for thinking and marketing experience.</p>
Saudi - Taif
مهندس زراعى خبرة لاتقل عن ١٠ سنوات ..زراعات بيوت محمية خضروات.<p><strong>تفاصيل إضافية</strong></p><ul><li>عدد الشواغر: 1</li><li>نظام الورديات: صباحية و مسائية</li><li>المزايا: تأمين صحي، تأمين اجتماعي، بدل انتقال، سكن</li></ul>
مؤسسة سوار للشقق المفروشة
Saudi - Taif
<p><strong>Required to work in Saudi Arabia (Taif):</strong><br>We are seeking an expert Central Laundry Supervisor to participate in establishing and managing an advanced laundry operation based on modern digital operating systems to serve the luxury hotel sector.</p><p></p><p><strong>Main tasks:</strong></p><ol><li><p>Oversee the startup phase and allocate production lines to ensure smooth autonomous work.</p></li><li><p>Manage <strong>immediate digital inventory operations</strong> to ensure accurate handover with hotels.</p></li><li><p>Monitor quality and efficiency indicators through electronic dashboards.</p></li><li><p>Train the technical staff on using modern digital tools in the laundry.</p></li></ol><p></p><p><strong>Requirements</strong></p><p></p><ul><li><p>Experience of no less than 5 years in managing operations at large central laundries (preferably with 5-star hotel experience).</p></li><li><p>Proficiency in dealing with <strong>Digital Management Systems</strong> and automated performance reports.</p></li><li><p>Experience in <strong>Inventory Control Systems</strong> and ensuring no asset overlap between clients.</p></li><li><p>The ability to manage operations with minimal manual intervention by leveraging production line automation.</p></li><li><p>Deep knowledge of sterilization and hotel quality standards (ISO/Hospitality Standards).</p></li></ul><ul><li><p>Sufficient experience in establishing central laundries</p></li><li><p>Ability to develop and innovate</p></li><li><p>Build an excellent team to work inside and outside the laundry</p></li><li><p>Ability to establish relationships with hotels and apartments to contract</p></li></ul><p></p>
Danube | الدانوب
Saudi - Taif
نبحث عن محاسب زبائن (كاشير) للعمل في متجر مرموق ، حيث سيكون مسؤولاً عن استقبال العملاء بابتسامة والتعامل مع عمليات البيع والدفع بدقة وكفاءة. مهام العمل تشمل:<br>• تشغيل نظام نقاط البيع وإتمام المعاملات المالية<br>• إدارة المدفوعات النقدية والإلكترونية وإصدار الفواتير<br>• التأكد من دقة الحسابات اليومية وإعداد تقارير المبيعات<br>• حل مشكلات العملاء بأسلوب احترافي وودي<div><br></div>
شركة سراكو
Saudi - Taif
<h3>نبذة عن الدور</h3><p>تبحث شركة سراكو عن <strong>مهندس زراعي</strong> للانضمام إلى فريقها في الطائف، مكة المكرمة. يركز هذا الدور بدوام كامل على دراسة خصائص التربة وتصميم شبكات الري والصرف الزراعي، بالإضافة إلى تحديد الآلات الزراعية المناسبة وتطوير استخداماتها. يتطلب الدور خبرة تتراوح بين سنتين وخمس سنوات في المجال الزراعي.</p><h3>المهام والمسؤوليات الرئيسية</h3><ul><li>دراسة الخصائص الفيزيائية والكيميائية للتربة الزراعية ومكوناتها.</li><li>متابعة فحص عينات النبات والتربة ومياه الري وتحليل نتائجها.</li><li>دراسة واختبار أنواع الأسمدة المناسبة وتقييم مدى استجابة المزروعات لها.</li><li>دراسة أنظمة الري واختيار الأنسب منها (كالري السطحي، بالرشاشات، المحوري، أو الموضعي).</li><li>تصميم مخططات وشبكات الري والصرف الزراعي ومتابعة إجراءات التركيب.</li><li>تقييم كفاءة أنظمة الري وتطويرها لتحقيق أفضل النتائج.</li><li>تحديد الآلات الزراعية المناسبة (مثل آلات الحراثة، الزراعة، الرش، الحصاد، جرش وخلط الحبوب).</li><li>إعداد برامج تشغيل وصيانة الآلات الزراعية والتأكد من جاهزيتها للعمل.</li><li>تطوير أساليب وإجراءات العمل ومواكبة التطورات التقنية في المجال الزراعي.</li><li>إعداد الوثائق والتقارير المتخصصة بنتائج الأعمال وعرضها وتوضيحها وحفظها في قاعدة البيانات المخصصة وفقاً للسياسات والإجراءات المعتمدة.</li></ul><h3>المؤهلات والخبرات المطلوبة</h3><ul><li>درجة جامعية في الهندسة الزراعية أو مجال ذي صلة.</li><li>خبرة عملية تتراوح بين <strong>سنتين وخمس سنوات</strong> في مجال الهندسة الزراعية.</li><li>فهم عميق لخصائص التربة والنباتات وأنظمة الري.</li><li>القدرة على تصميم وتنفيذ مشاريع الري والصرف الزراعي.</li><li>معرفة بالآلات والمعدات الزراعية الحديثة.</li></ul><h3>المهارات والكفاءات</h3><ul><li>مهارات تحليلية قوية لتقييم البيانات الزراعية.</li><li>القدرة على حل المشكلات واتخاذ القرارات الفنية.</li><li>مهارات تواصل ممتازة لإعداد وتقديم التقارير.</li><li>القدرة على العمل بشكل مستقل وكجزء من فريق.</li><li>الالتزام بتطوير المعرفة والمهارات المهنية باستمرار.</li></ul><h3>بيئة العمل</h3><p>يعمل المهندس الزراعي في هذا الدور بدوام كامل ضمن فريق شركة سراكو في مدينة الطائف بمنطقة مكة المكرمة. تلتزم الشركة بتوفير بيئة عمل داعمة تسهم في تحقيق الأهداف الزراعية بكفاءة.</p><h3>معلومات إضافية</h3><p>هذه فرصة للانضمام إلى فريق متخصص في شركة سراكو، حيث سيتمكن المهندس الزراعي من تطبيق خبراته في تطوير وتحسين العمليات الزراعية. لم يتم الكشف عن تفاصيل الراتب في الوقت الحالي.</p>
شركة سراكو
Saudi - Taif
<h3>نبذة عن الدور</h3><p>تبحث شركة سراكو عن <strong>مهندس ميكانيكي</strong> للانضمام إلى فريقها في الطائف، مكة المكرمة. يركز هذا الدور بدوام كامل على إعداد التصاميم والمخططات لمشاريع الهندسة الميكانيكية، بالإضافة إلى تطوير برامج التجميع والتركيب والتشغيل والصيانة الوقائية للمعدات والتجهيزات الصناعية.</p><h3>المهام والمسؤوليات الرئيسية</h3><ul><li>إعداد التصاميم والمخططات التفصيلية لمشاريع الهندسة الميكانيكية، بما في ذلك المولدات، التوربينات، وحدات التكييف، المراجل، وشبكات التوزيع لأنظمة التدفئة والتكييف والتبريد.</li><li>تطوير خطط وبرامج تجميع وتركيب التجهيزات الميكانيكية للمشاريع الصناعية، وتحديد أنظمة الضبط والتحكم اللازمة.</li><li>إعداد برامج تشغيل المعدات الصناعية وبرامج الصيانة الوقائية، مع الالتزام بتعليمات الشركات المصنعة ومتابعة تنفيذها.</li><li>المساهمة في تطوير أساليب وإجراءات العمل ومواكبة أحدث التطورات التقنية في المجال.</li><li>إعداد الوثائق والتقارير المتخصصة المتعلقة بالأعمال والمشاريع الهندسية، وتوثيق نسب التقدم، وعرضها وحفظها في قاعدة البيانات المخصصة وفقاً للسياسات والإجراءات المعتمدة.</li></ul><h3>المؤهلات والخبرات المطلوبة</h3><ul><li>خبرة عملية تتراوح بين <strong>2 إلى 5 سنوات</strong> في مجال الهندسة الميكانيكية.</li><li>القدرة على إعداد التصاميم والمخططات الهندسية بدقة.</li><li>معرفة قوية ببرامج تجميع وتركيب وتشغيل وصيانة المعدات الميكانيكية.</li><li>مهارات ممتازة في إعداد التقارير الفنية والوثائق المتخصصة.</li></ul><h3>بيئة العمل</h3><p>هذه الوظيفة بدوام كامل في مدينة الطائف، مكة المكرمة، ضمن فريق عمل متخصص في شركة سراكو. يتطلب الدور التزاماً بالمعايير المهنية العالية والعمل ضمن بيئة ديناميكية.</p><h3>معلومات إضافية</h3><ul><li>المنطقة: مكة المكرمة.</li><li>المدينة: الطائف.</li><li>نوع الوظيفة: دوام كامل.</li><li>الراتب: غير معلن.</li></ul><h3>التقديم</h3><p>ندعو المهندسين الميكانيكيين المؤهلين والمهتمين بهذا الدور إلى التقديم.</p>
Saudi - Taif
<h3>About the Project and Role</h3><p>Bechtel Corporation is seeking a Field Engineering SMP professional for the Ar Rjum Project in Saudi Arabia. This full-time role is based near Taif and Riyadh, specifically within the Central Arabian Gold Region, approximately 200 km north-east of Taif and 26 km south of Al Mouwayh. The Ar Rjum Project is a greenfield gold project that includes three open pit mining operations, a processing plant, tailings management facilities, and extensive supporting infrastructure such as water and power supply, maintenance facilities, offices, and accommodation villages.</p><h3>Role Summary</h3><p>The SMP Field Engineer is responsible for construction engineering tasks and activities within the Structural/Mechanical discipline. This involves utilizing relevant industrial codes and standards for steel, mechanical equipment, and tank installations. Key responsibilities include developing work plans, coordinating materials, performing and documenting inspections, ensuring safety and quality control, reporting progress, and resolving design and construction conflicts related to commodity installation and testing through turnover to Startup/Commissioning. The role requires strong planning, organizational skills, the ability to conduct detailed inspections, and produce accurate, clear, and concise documentation.</p><h3>Key Responsibilities</h3><ul><li>Lead structural steel and mechanical equipment installation activities in accordance with project specifications, approved drawings, applicable codes and standards, ITPs, method statements, and approved construction procedures.</li><li>Lead installation, alignment, and commissioning support for static and rotating mechanical equipment, including crushers, SAG mills, ball mills, conveyors, screens, feeders, pumps, compressors, blowers, fans, gearboxes, filters, pressure vessels, and other mining and process plant equipment, ensuring compliance with OEM requirements and approved procedures.</li><li>Ensure compliance with project quality requirements, including inspection and test plans, hold and witness points, welding and NDE requirements, NCR resolution, punch list management, turnover documentation, and final acceptance activities.</li><li>Coordinate with engineering on constructability and design issues related to commodity installations and work sequencing.</li><li>Provide field engineering support and assistance to superintendents, supporting personnel in meeting cost and time schedules, verifying materials, equipment, and quality, and assuring results meet design requirements.</li><li>Develop work plans, coordinate material take-offs and requisitions, perform and document inspections, report progress, and resolve conflicts in design and construction related to the installation and testing of civil commodities.</li><li>Assure procedural compliance, material control, and complete and thorough documentation of inspections for completed work.</li><li>Direct or perform preparation of quantity listings of field purchased material and equipment and initiate requisitions for field material purchases.</li><li>Support preparation of construction drawings and schedules, design of temporary construction facilities, and ensure preparation of as-built drawings and other job plans.</li><li>Support planning and delivery of construction materials and equipment, assuring that proper warehousing and storage exists to ensure environmental protection.</li><li>Review specifications, purchase orders, subcontracts, inspection reports, delivery schedules, instruction manuals, and technical data to assist and advise on site.</li></ul><h3>Required Experience</h3><ul><li>5-10 years of experience in a relevant field engineering role.</li><li>Proficiency in interpreting design and vendor drawings and specifications.</li><li>Demonstrated ability to apply industrial codes and standards for steel, mechanical equipment, and tank installations.</li></ul><h3>Work Type and Location</h3><p>This is a full-time position located in Saudi Arabia, with project sites approximately 200 km north-east of Taif towards Riyadh. The role involves working on a large-scale greenfield gold project with extensive infrastructure development.</p>
BAE Systems Saudi Arabia
Saudi - Taif
<h3>About BAE Systems Saudi Arabia</h3><p>BAE Systems operates as the UK Government’s nominated Prime Contractor under Government-to-Government arrangements, providing equipment, support, and training to Saudi Arabia. The company is responsible for the maintenance of Royal Saudi Air Force (RSAF) aircraft and for training RSAF and Royal Saudi Naval Force personnel in the safe use of aircraft, equipment, and weapons. BAE Systems Saudi Arabia is committed to supporting the Saudi Arabian National Agenda, including Saudisation and the development of Saudi National capabilities through its National Partner Companies, reinforcing industrialisation and partnerships.</p><h3>Role Overview: Armament Senior Supervisor</h3><p>The Armament Senior Supervisor is responsible for carrying out armament aircraft maintenance activities and supervising the consolidation training of assigned RSAF Technicians and Saudi National BAE Systems Trainees. This role supports the RSAF Typhoon Flying programme, ensuring aircraft achieve contracted Operational Ready Rates in accordance with industry best practices, BAE Systems procedures, the Maintenance Organisation Exposition, and the RSAF Regulatory Framework. The position is full-time and based in Taif, offering a competitive salary. The supervisor will also deputise for the Typhoon Maintenance – Armament Senior Supervisor during periods of absence.</p><h3>Key Responsibilities</h3><ul><li>Perform armament aircraft maintenance, including detailed troubleshooting and rectification.</li><li>Execute flight line duties as directed.</li><li>Raise Technical Publication Review Forms (TPRF) against approved data.</li><li>Assist in raising Technical Requests (TRs) for aircraft-related anomalies.</li><li>Support the work centre Senior Supervisor in ensuring accurate shift handovers.</li><li>Adhere strictly to the use of approved data only.</li><li>Provide 100% supervision to assigned RSAF or BAE Systems SN Trainee Technicians at level ‘A’.</li><li>Provide and supervise consolidation training and mentoring to assigned RSAF or BAE Systems SN personnel for 1st signature (Technician) award.</li><li>Provide training guidance and mentoring to nominated RSAF or BAE Systems SN personnel for 2nd signature (Supervisor) award.</li><li>Provide Supervisory 2nd Signature (oversign) for engineering and maintenance tasks by RSAF or BAE Systems SN in support of consolidation training on operational aircraft.</li><li>Maintain accurate log books for assigned RSAF or BAE SN technicians.</li><li>Liaise with RSAF and BAE Systems management to identify training opportunities and potential shortfalls.</li><li>Obtain necessary licences and authorisations to operate, support, and task various vehicles, and tow aircraft and support equipment. Act as fleet vehicle custodian if directed.</li><li>Support the production of monthly progress reports on training progression.</li><li>Assist the training cell by providing additional training and supervision to RSAF and BAE Systems personnel, including flight line servicing and aircraft tow duties.</li><li>Provide trade cover for the flight line hit team and end of runway (EOR) troubleshooting and fixing crew.</li><li>Undertake independent inspections of Safety Critical Systems (3rd Signature responsibility) in the absence of the Senior Supervisor.</li><li>Deputise for the work centre trade senior supervisor during periods of leave or absence.</li><li>Carry out Aircrew post-Flight De-briefs as required.</li><li>Train RSAF personnel in the role of Supervisor.</li><li>Undertake any reasonable task within the scope of the armament aircraft trade, as directed by Senior Supervisors and line management.</li><li>Demonstrate specified behaviours in all work and interactions with maintenance personnel, in line with M&CA People Behaviours BAESKSA-ENG-MCA-GOV-005.</li><li>Support and participate in reporting all Product Safety & Environmental occurrences, promoting a Just Culture.</li><li>Promote and support the Salam Operations Quality Management System by understanding AS9110 requirements and fostering customer focus and continuous improvement.</li></ul><h3>Qualifications and Experience</h3><ul><li><p><strong>Essential:</strong></p><ul><li>Extensive post-qualification practical maintenance experience within an operational flying aircraft environment, supported by formal recorded workplace applied training, OR substantial years of experience on the same aircraft type.</li><li>Holds 2nd signature authority.</li><li>Demonstrated leadership skills and proven ability to supervise all levels of engineering personnel.</li><li>A recognised qualification to NVQ3/ONC/OND/BTEC level in a relevant technical discipline, a technical apprenticeship, or a suitable equivalent technical qualification acceptable to M&CA, OR</li><li>Part 66 licensed (current or lapsed), or a suitable equivalent technical licence acceptable to M&CA.</li><li>Relevant type training (‘Q’ Course) and equipment-specific training if required.</li></ul></li><li><p><strong>Desirable:</strong></p><ul><li>Working knowledge of EASA Part 145 & 147.</li><li>Thorough understanding of company processes and procedures.</li><li>Broad aerospace and defence company/industry knowledge.</li><li>Proven supervisory experience within the defined area.</li></ul></li></ul>
BAE Systems Saudi Arabia
Saudi - Taif
<h3>About the Role</h3><p>BAE Systems is seeking an experienced <strong>SMU Manager</strong> to ensure the safe and effective delivery of the Taif-based Maintenance Solution. This full-time role is integral to upholding the standards of the Salam Maintenance & Continuing Airworthiness Management System and ensuring compliance with the agreed Salam Maintenance Organisation Exposition (MOE).</p><h3>Key Responsibilities</h3><ul><li>Ensure all SMU maintenance personnel are suitably qualified and experienced, and that all maintenance is conducted according to Approved Maintenance data and engineering standards.</li><li>Develop and maintain Maintenance Performance Metrics to support cost-effective deployment of the SMU Maintenance solution.</li><li>Highlight maintenance-related risks to the business via the Salam Risk and Opportunity Management System.</li><li>Escalate issues with RSAF RFL or the Maintenance Organisation Exposition (MOE) to the Head of Engineering & Compliance.</li><li>Formally record and escalate data integrity issues with Approved Data to the originator or Head of Engineering & Compliance.</li><li>Ensure the SMU Maintenance Organisation has sufficient qualified staff and provides necessary training to maintain competence.</li><li>Promote a safety reporting culture, ensuring proactive hazard analysis documented through the Taif Operations Safety Case.</li><li>Plan and implement SMU maintenance support activities to meet RSAF Operational requirements.</li><li>Provide direct supervision to personnel to ensure engineering standards are maintained to required quality.</li><li>Direct reports and their supporting staff, ensuring adherence to appropriate quality standards.</li><li>Ensure all SMU personnel comply with safety precautions, maintenance principles, and engineering/documentation procedures.</li><li>Act as SHE Plan Holder for the SMU facility and ensure individuals hold correct Technical Qualifications and Authorisations.</li><li>Maintain manning levels by liaising with the Salam Project Manpower resource team.</li><li>Identify and report practices, procedures, or systems that threaten safety or quality.</li><li>Investigate all reported quality occurrences pertaining to the SMU and ensure local quality checks are carried out.</li><li>Investigate and report on customer complaints, acting as a focal point for on-site issues.</li><li>Manage the SMU SMS utilizing SORT/MEDA and carry out additional delegated tasks.</li></ul><h3>Candidate Requirements</h3><ul><li>A minimum of <strong>10 years of relevant experience</strong> in maintenance management within an aerospace or defense context.</li><li>Demonstrated ability to manage maintenance operations in line with regulatory and organizational standards.</li><li>Strong understanding of safety management systems and quality assurance processes.</li><li>Proven leadership skills with the ability to direct and develop a technical team.</li></ul><h3>About BAE Systems</h3><p>BAE Systems has a long-standing commitment to the Kingdom of Saudi Arabia, providing defense platforms and services for over 50 years. The company actively supports Saudi Arabia's National Objectives through significant investments in local talent, technology, infrastructure, and the defense supply chain. BAE Systems KSA is dedicated to the full inclusion of qualified individuals with disabilities, ensuring reasonable accommodations are provided during the application, interview process, and for performing essential job functions.</p>
SEVEN (Saudi Entertainment Ventures)
Saudi - Taif
<h3>About the Role</h3><p>SEVEN (Saudi Entertainment Ventures) is seeking a <strong>Senior Finance Specialist</strong> with expertise in Inventory & Fixed Assets to join their team in Taif, Makkah Province. This full-time role is responsible for ensuring accurate accounting, control, and reporting of inventory and fixed assets in compliance with IFRS and company policies. The specialist will manage inventory across Retail, F&B, and Spare Parts, and oversee the entire fixed asset lifecycle, from capitalization to disposals.</p><h3>Key Responsibilities</h3><ul><li>Manage the full fixed asset lifecycle, including creation, capitalization, transfers, depreciation, impairments, and disposals, in line with accounting standards.</li><li>Monitor Assets Under Construction (AUC/CWIP) and ensure timely and accurate capitalization upon project completion.</li><li>Maintain and reconcile the Fixed Asset Register with the General Ledger and Trial Balance.</li><li>Ensure accurate asset classification, tagging, and assignment of useful lives.</li><li>Review CAPEX transactions and validate CAPEX vs. OPEX classification.</li><li>Monitor and validate inventory movements across ERP and warehouse systems.</li><li>Perform stock counts, cycle counts, and reconciliations, including variance analysis.</li><li>Support inventory valuation, including provisions, obsolescence, and write-offs (IAS 2).</li><li>Ensure accurate recording of inventory balances and consumption flows.</li><li>Prepare and post depreciation, inventory, and related journal entries.</li><li>Support month-end, quarter-end, and year-end closing activities.</li><li>Perform sub-ledger to General Ledger reconciliations for inventory and fixed assets.</li><li>Prepare reports and schedules for management reporting and finance leadership.</li></ul><h3>Compliance and Audit Support</h3><ul><li>Ensure compliance with IFRS, internal policies, capitalization thresholds, and Delegation of Authority (DoA).</li><li>Support internal and external audits by providing documentation, reconciliations, and explanations.</li><li>Participate in physical asset verification and inventory counts, and resolve discrepancies.</li></ul><h3>Stakeholder Coordination and Process Improvement</h3><ul><li>Coordinate with Procurement, Projects, Operations, and other Finance teams on asset and inventory transactions.</li><li>Review Purchase Requisitions (PRs), Purchase Orders (POs), and invoices to ensure correct accounting treatment.</li><li>Identify and drive process improvements and system enhancements.</li><li>Support data accuracy and utilization across ERP and sub-systems.</li></ul><h3>Qualifications and Experience</h3><ul><li>2-5 years of experience in a finance role with a focus on inventory and fixed assets.</li><li>Proficiency in ERP systems (*, SAP – FI/MM).</li><li>Experience with inventory/warehouse management systems.</li><li>Familiarity with fixed asset sub-ledgers and project systems.</li><li>Strong reporting skills using tools such as Excel and Business Intelligence (BI).</li></ul><h3>Application Process</h3><p>This role offers an opportunity to contribute to financial integrity and asset management within SEVEN. Salary details will be discussed during the interview process.</p>
BAE Systems Saudi Arabia
Saudi - Taif
<h3>About BAE Systems Saudi Arabia</h3><p>BAE Systems is the UK Government’s nominated Prime Contractor under Government-to-Government arrangements, providing equipment, support, and training to Saudi Arabia. The company maintains Royal Saudi Air Force (RSAF) aircraft and trains RSAF and Royal Saudi Naval Force personnel in the safe use of aircraft, equipment, and weapons. BAE Systems Saudi Arabia is committed to supporting the Saudi Arabian National Agenda, including Saudisation and the development of Saudi National capability through the growth of Saudi National Partner Companies, reinforcing industrialisation and partnerships.</p><h3>Role Overview: Rectification Controller Superintendent</h3><p>The Rectification Controller Superintendent will manage and control personnel and resources related to AGF (Aircraft Ground Facilities) activities. This role is crucial for supporting the RSAF Typhoon Flying programme and ensuring aircraft generation aligns with the RSAF LMR (Logistics Management Requirements). This is a full-time position based in Taif, requiring over 10 years of experience, and offers a competitive salary.</p><h3>Key Responsibilities</h3><ul><li>Manage and coordinate maintenance efforts on shift to meet daily flying programmes and associated maintenance plans.</li><li>Track maintenance plans for AGF allocated rebuilds.</li><li>Oversee the debrief, dispatcher, and expediter functions.</li><li>Conduct inspections of aircraft shelters to ensure husbandry standards are met.</li><li>Review FOD (Foreign Object Debris) practices across the AGF.</li><li>Monitor the effectiveness of maintenance operations.</li><li>Liaise with MOF (Maintenance Operations Flight) to coordinate cannibalisation activities.</li><li>Coordinate with trade senior superintendents and supervisors to prioritise manpower allocation for aircraft rectification and generation.</li><li>Ensure aircraft are configured correctly for the flying programme.</li><li>Monitor engineering practices across the AGF to maintain and promote high airworthiness standards.</li><li>Coordinate with Engineering Operations for flying programme issues.</li><li>Liaise with the Senior Superintendent and Senior Supervisors to address Technical Queries (TQs) or other issues affecting the aircraft fleet.</li><li>Manage and monitor the effectiveness of EOR (Expedite Operations Readiness) and Hit Teams in support of operations.</li></ul><h3>Essential Qualifications and Experience</h3><ul><li>Education to HNC level or a recognised equivalent, or relevant experience supported by formal, recorded workplace applied training.</li><li>Demonstrable experience as a Rectification Controller within a busy, military operational flying unit.</li><li>Completion of a recognised aircraft engineering apprenticeship in industry/military or a similar qualification in aircraft systems.</li><li>Previous ESS (Engineering Support System) experience with a formal ‘Q’ annotation.</li><li>Strong interpersonal skills for coordinating multiple activities, with the ability to communicate, influence, and direct decision-making.</li><li>Solid understanding of company processes, procedures, and industry knowledge.</li></ul><h3>Desirable Attributes</h3><ul><li>An understanding of engineering operations procedures within a maintenance environment.</li><li>Proven managerial experience within the aerospace industry, preferably gained on 3rd and/or 4th Generation military aircraft at a Supervisor level or equivalent.</li><li>Experience working in the aviation industry in a Gulf Coast Country.</li><li>Ability to act on own initiative within the scope of the job.</li><li>A conscientious approach to work and meticulous attention to detail.</li><li>A track record of meeting strict deadlines without compromising standards and quality.</li></ul><h3>Application Process</h3><p>Candidates meeting the specified requirements are encouraged to apply for this challenging and rewarding role within BAE Systems Saudi Arabia.</p>
شركة سراكو شركة شخص واحد
Saudi - Taif
وضع وتحديد مؤشرات ومعايير الأداء والجودة في خدمة العملاء، والمشاركة في وضع وتحديث إجراءات وأدلة خدمة العملاء وتطوير برامج لتعظيم جودة ومهنية أنظمة خدمة العملاء، وتحديد نقاط القوة والضعف في أنظمة خدمة العملاء ورضاهم وإعداد الوثائق والتقارير المتخصصة والمتعلقة في مجال خدمة العملاء وعرضها وحفظها.
معهد الخوارزمي العالي للتدريب
Saudi - Taif
وضع وتحديد مؤشرات ومعايير الأداء والجودة في خدمة العملاء، والمشاركة في وضع وتحديث إجراءات وأدلة خدمة العملاء وتطوير برامج لتعظيم جودة ومهنية أنظمة خدمة العملاء، وتحديد نقاط القوة والضعف في أنظمة خدمة العملاء ورضاهم وإعداد الوثائق والتقارير المتخصصة والمتعلقة في مجال خدمة العملاء وعرضها وحفظها.
همة الإعلامية
Saudi - Taif
وضع وتحديد مؤشرات ومعايير الأداء والجودة في خدمة العملاء، والمشاركة في وضع وتحديث إجراءات وأدلة خدمة العملاء وتطوير برامج لتعظيم جودة ومهنية أنظمة خدمة العملاء، وتحديد نقاط القوة والضعف في أنظمة خدمة العملاء ورضاهم وإعداد الوثائق والتقارير المتخصصة والمتعلقة في مجال خدمة العملاء وعرضها وحفظها.
شركة سراكو
Saudi - Taif
<h3>نبذة عن الدور</h3><p>تبحث شركة سراكو عن <strong>أخصائي خدمة عملاء</strong> للانضمام إلى فريقها في الطائف، مكة المكرمة. يركز هذا الدور بدوام كامل على تطوير وتحسين جودة خدمة العملاء، وتحديد مؤشرات الأداء، والمشاركة في صياغة الإجراءات والأدلة لضمان تقديم خدمة متميزة.</p><h3>المسؤوليات الرئيسية</h3><ul><li>إجراء الدراسات والتحاليل المتخصصة لوضع وتحديد مؤشرات الأداء الرئيسية ومعايير الجودة لخدمة العملاء، بالتنسيق مع إدارة الجودة، ومتابعتها لضمان سير العمل بكفاءة.</li><li>المشاركة في وضع وتحديث إجراءات وأدلة خدمة العملاء، بما يشمل تفاصيل الاتصال بهم واستلام طلباتهم واستفساراتهم والرد عليها بفعالية ومهنية، والتنسيق مع الإدارات المعنية.</li><li>تطوير برامج ومبادرات تهدف إلى تجاوز توقعات العملاء واحتياجاتهم من حيث جودة ومهنية أنظمة خدمة العملاء، لبناء نموذج متكامل للخدمة.</li><li>تحليل المعلومات والبيانات لتحديد نقاط القوة والضعف في أنظمة خدمة العملاء، وتحليل نتائج تقييم رضا العملاء، وتحديد الأنماط المتكررة للشكاوى والثغرات، ووضع الخطط اللازمة لمعالجتها.</li><li>إعداد الوثائق والتقارير المتخصصة المتعلقة بخدمة العملاء، وتقديم التوصيات والحلول المناسبة، وعرضها وحفظها في قاعدة البيانات المخصصة وفقاً للسياسات والإجراءات المعتمدة.</li></ul><h3>المؤهلات والخبرات</h3><ul><li>خبرة تتراوح من <strong>2 إلى 5 سنوات</strong> في مجال خدمة العملاء أو مجال ذي صلة.</li><li>القدرة على وضع وتحديد مؤشرات ومعايير الأداء والجودة.</li><li>مهارات تحليلية قوية لتحديد نقاط القوة والضعف في أنظمة الخدمة.</li><li>القدرة على إعداد الوثائق والتقارير المتخصصة.</li></ul><h3>بيئة العمل</h3><p>هذه الوظيفة بدوام كامل في الطائف، مكة المكرمة. سيعمل أخصائي خدمة العملاء ضمن فريق متخصص يهدف إلى تحقيق أعلى مستويات رضا العملاء وجودة الخدمة.</p><h3>معلومات إضافية</h3><p>الراتب لهذا الدور غير معلن وسيتم تحديده بناءً على المؤهلات والخبرات.</p>
BAE Systems Saudi Arabia
Saudi - Taif
<h3>About the Role</h3><p>BAE Systems is seeking an <strong>Air Electrical Battery Shop Technician Supervisor</strong> to join the Typhoon Maintenance Organisation in Taif. This full-time role involves overseeing aspects of the Air Electrical and Battery Shop, ensuring compliance and driving continuous improvement. The successful candidate will also hold company line management responsibilities, providing functional direction, guidance, and exercising duty of care, welfare, health & safety for personnel.</p><h3>Role Objectives</h3><p>The primary objectives for this position include:</p><ul><li>Ensuring the effective delivery of all activities as outlined in the shop component repair plan.</li><li>Supporting the Salam Project in achieving contracted Operational Readiness (OR) and Key Performance Measurements (KPM) for Maintenance Support Service.</li></ul><h3>Key Responsibilities</h3><p>The Air Electrical Battery Shop Technician Supervisor will be responsible for a range of duties, including:</p><ul><li>Upholding a safety-first approach, implementing safety measures and guidelines to protect personnel, product, and operations, while promoting Safety, Health & Environment (SHE) and Product Safety & Environment (PS&E).</li><li>Ensuring adherence to BAE Systems Operational Framework, Life Cycle Management (LCM) practices, Maintenance & Continuing Airworthiness (M&CA) Mandates, Maintenance Organisation Exposition (MOE), and Royal Saudi Air Force (RSAF) Logistics Management Regulations (LMR).</li><li>Enhancing customer satisfaction by supporting maintenance, airworthiness, safety, and continual improvement, and identifying potential new processes and procedures.</li><li>Driving a culture of continuous improvement (CI) throughout the maintenance organization, encouraging innovative ideas and initiatives, and adapting best industry practices.</li><li>Reviewing maintenance practices, identifying potential improvements, and reporting any malpractice affecting airworthiness or safety to the Senior Maintenance Manager.</li><li>Ensuring necessary facilities and resources are available according to company policies and monitoring personnel standards to identify negative trends or deficiencies.</li><li>Managing personnel development reports within their direct and indirect line management.</li><li>Providing training, consolidation, and counterpart development activities to RSAF and BAE Systems personnel.</li><li>Maintaining operational readiness of shop equipment, scheduling calibrations, and ensuring correct tooling and approved data are available.</li><li>Reporting and monitoring equipment and infrastructure damage or deficiencies using appropriate media.</li><li>Ensuring all personnel undertaking maintenance are authorized and maintaining anti-FOD surveillance.</li><li>Ensuring all maintenance tasks are carried out to the highest quality standards, including accurate recording on the airworthiness tool (ESS).</li><li>Conducting oversight checks for shop husbandry and escalating any forecasted planning, consumable, or PPE deficiencies.</li><li>Holding 2nd Signature authority and undertaking associated responsibilities.</li></ul><h3>Qualifications and Experience</h3><p>Candidates for this role should possess the following qualifications and experience:</p><ul><li><p><strong>Essential:</strong></p><ul><li>A recognized qualification to NVQ3/ONC/OND/BTEC level in a relevant technical discipline, a technical apprenticeship, or an equivalent technical qualification acceptable to M&CA.</li><li>At least 7 years of post-qualification practical maintenance experience within an operational flying aircraft environment, supported by formal recorded workplace applied related training, OR 3 years on the same aircraft type.</li><li>Demonstrated leadership skills and proven ability to supervise engineering personnel at all levels.</li><li>Relevant type training (‘Q’ Course) and equipment-specific training if required.</li><li>Ability to obtain and maintain Saudi Council of Engineers (SCE) membership at the appropriate level prior to commencing employment in KSA.</li></ul></li><li><p><strong>Desirable:</strong></p><ul><li>Thorough understanding of company processes and procedures.</li><li>Broad aerospace and defense company/industry knowledge.</li><li>Proven supervisory experience within the defined area.</li><li>An understanding of RAF and/or RSAF engineering operating procedures.</li><li>A track record of meeting strict deadlines without compromising standards and quality.</li><li>Previous experience in delivering workplace training.</li><li>An understanding of ESS or similar electronic-based reporting systems.</li></ul></li></ul><h3>Work Environment</h3><p>This is a full-time position based in Taif, within the Typhoon Maintenance Organisation at BAE Systems. The role requires a commitment to maintaining high standards of safety, compliance, and continuous improvement in a dynamic operational environment.</p>
شركة عبدالعزيز الجاسر التجارية القابضة
Saudi - Taif
<h3>نبذة عن الدور</h3><p>تبحث شركة عبدالعزيز الجاسر التجارية القابضة عن <strong>فني تدفئة وتهوية وتكييف</strong> للانضمام إلى فريقها في الطائف، مكة المكرمة. يركز هذا الدور بدوام كامل على تركيب وصيانة وتصليح أنظمة التدفئة والتهوية وتكييف الهواء، بما في ذلك الوحدات ومضخات التدفئة ومكيفات الهواء.</p><h3>المسؤوليات الرئيسية</h3><ul><li>المساهمة في عملية تصميم نظم التهوية وتكييف الهواء والتدفئة، وتقديم المشورة بشأن المواد ومعايير الجودة.</li><li>تقديم الدعم للمشروعات الهندسية، ومباشرة تنفيذ العمليات وتركيب النظم، ووضع جداول زمنية وتقديرات التكلفة.</li><li>تقديم الدعم في أعمال الصيانة وتصليح النظم.</li><li>مراقبة الجوانب الفنية المتصلة بإنتاج وتركيب واستعمال وصيانة منظومات وأجهزة ومعدات التدفئة والتهوية والتكييف للتأكد من دقة الأداء ومطابقة المواصفات.</li><li>اتباع سياسات وإجراءات الصحة والسلامة والبيئة.</li></ul><h3>المؤهلات والخبرة</h3><ul><li>خبرة تتراوح من 0 إلى 1 سنة في مجال ذي صلة.</li><li>القدرة على تركيب وصيانة وتصليح معدات التكييف والتدفئة والتهوية.</li></ul><h3>بيئة العمل</h3><p>هذه الوظيفة بدوام كامل ومقرها في الطائف، مكة المكرمة. يتطلب الدور العمل ضمن فريق لضمان تنفيذ المهام بكفاءة وفعالية.</p><h3>معلومات إضافية</h3><p>الراتب لهذا المنصب غير معلن. تشجع الشركة المرشحين ذوي الخبرة الحديثة على التقديم.</p>
شركة سراكو
Saudi - Taif
<h3>نبذة عن الدور</h3><p>تبحث شركة سراكو عن <strong>فني تدفئة وتهوية وتكييف</strong> للانضمام إلى فريقها في الطائف، مكة المكرمة. يركز هذا الدور بدوام كامل على تركيب وصيانة وإصلاح معدات التكييف والتدفئة والتهوية، بما في ذلك الوحدات ومضخات التدفئة ومكيفات الهواء. يتطلب الدور خبرة تتراوح بين سنتين وخمس سنوات في المجال.</p><h3>المهام والمسؤوليات الرئيسية</h3><ul><li>المساهمة في عملية تصميم نظم التهوية وتكييف الهواء والتدفئة، وتقديم المشورة بشأن المواد ومعايير الجودة.</li><li>تقديم الدعم للمشروعات الهندسية، ومباشرة تنفيذ العمليات وتركيب النظم، ووضع جداول زمنية وتقديرات التكلفة.</li><li>تقديم الدعم في أعمال الصيانة وتصليح النظم.</li><li>مراقبة الجوانب الفنية المتصلة بإنتاج وتركيب واستعمال وصيانة منظومات وأجهزة ومعدات التدفئة والتهوية والتكييف للتأكد من دقة الأداء ومطابقة المواصفات.</li><li>اتباع سياسات وإجراءات الصحة والسلامة والبيئة.</li></ul><h3>المؤهلات والخبرات</h3><ul><li>خبرة تتراوح بين <strong>سنتين وخمس سنوات</strong> في مجال التدفئة والتهوية وتكييف الهواء.</li><li>القدرة على تركيب وصيانة وإصلاح معدات التكييف والتدفئة والتهوية.</li><li>فهم جيد لمعايير الجودة والمواد المستخدمة في نظم التدفئة والتهوية وتكييف الهواء.</li></ul><h3>المهارات المطلوبة</h3><ul><li>مهارات فنية قوية في تشخيص الأعطال وإصلاحها.</li><li>القدرة على العمل بشكل مستقل وكجزء من فريق.</li><li>الالتزام بسياسات وإجراءات الصحة والسلامة والبيئة.</li></ul><h3>بيئة العمل</h3><p>هذا الدور هو وظيفة بدوام كامل ضمن فريق شركة سراكو في الطائف، مكة المكرمة. سيعمل الفني في بيئة تتطلب الدقة والالتزام بمعايير السلامة والجودة.</p><h3>تقديم الطلبات</h3><p>ندعو المهتمين الذين يستوفون المتطلبات المذكورة أعلاه إلى تقديم طلباتهم لهذه الفرصة في شركة سراكو.</p>
Receive email alerts for Embedded Systems Engineer Jobs jobs
You can cancel your email alert at anytime