Embedded Systems Engineer Jobs in Saudi

Role Summary: The Mechanical Quality Engineer (Piping, Welding, Coating & NDT) is responsible for assuring and controlling the quality of piping fabrication and installation, welded joints, protective coating systems, and non-destructive testing activities for the JESCO / Arcelor Mittal Tubular Products Al-Jubail Heat Treatment and Finishing Line Project. The role provides owner-side surveillance of EPC contractors, subcontractors, vendors, and third-party inspection agencies from material receipt and fabrication through erection, testing, pre-commissioning, turnover, and final dossier close-out. The incumbent ensures compliance with approved project specifications, drawings, Inspection and Test Plans, welding and coating procedures, applicable Saudi requirements, and relevant ASME, API, ASTM, AWS, ISO, SSPC/AMPP, and ASNT standards.<br>Job Duties & Responsibilities:Review and approve contractor quality documents, including Project Quality Plans, Inspection and Test Plans, method statements, field inspection checklists, welding procedure specifications and qualification records, NDT procedures, coating procedures, pressure-test packages, and turnover dossiers. Perform surveillance and inspection of shop and field piping activities, including material receiving, identification and traceability, storage and preservation, fit-up, joint preparation, welding, supports, flange alignment, bolt tightening, cleanliness, reinstatement, and system completion. Verify piping materials, fittings, flanges, valves, gaskets, welding consumables, and coating materials against approved drawings, specifications, purchase orders, material requisitions, MTCs, heat numbers, and positive material identification requirements. Witness and verify welder and welding-operator qualifications, WPS/PQR compliance, welding consumable control, preheat and inter pass temperature, heat input, joint sequencing, visual inspection, weld repair, and post-weld heat treatment activities where applicable. Coordinate and monitor NDT activities, including VT, PT, MT, UT, RT, and advanced methods when specified; verify technician certification, equipment calibration, technique sheets, examination coverage, acceptance criteria, reports, film or digital-image quality, and repair-cycle closure. Inspect surface preparation and coating application, including environmental conditions, abrasive and coating batch control, surface cleanliness and profile, stripe coating, wet and dry film thickness, holiday testing, adhesion testing, curing, repair, and final acceptance in accordance with the approved coating system. Witness piping pressure and leak testing, line flushing or blowing, drying, chemical cleaning where applicable, valve testing, punch-list clearance, and reinstatement; confirm calibrated test instruments, test boundaries, temporary supports, safety controls, and complete test records. Review isometric drawings, P&IDs, line lists, plot plans, weld maps, spool drawings, support details, vendor drawings, specifications, and approved technical queries to confirm construction and inspection compliance. Raise inspection observations and Non-Conformance Reports for deviations; support root-cause analysis, corrective and preventive actions, concession or repair review, verification of implementation, and timely close-out. Maintain inspection status, weld and NDT traceability, coating records, NCR and punch-list logs, quality KPIs, and weekly progress reports; identify recurring defects and recommend preventive improvement actions. Coordinate with Project Management, Engineering, Construction, HSE, Operations, EPC contractors, vendors, authorized inspectors, and third-party agencies to resolve quality issues without compromising safety, code compliance, or project schedule. Support mechanical completion, system handover, pre-commissioning, and final quality dossier review, ensuring all records are complete, legible, traceable, approved, and aligned with the project turnover index.<br>Education & Experience:Bachelor’s degree in mechanical engineering or equivalent discipline Minimum 8-10 years of QA/QC experience in piping, welding, coating, and NDT for industrial construction, steel, oil and gas, petrochemical, power, or process-plant projects. At least 3 years in an owner, client, PMC, or lead site-quality role supervising EPC contractors, subcontractors, and third-party inspection agencies. Demonstrated field experience with carbon steel, stainless steel, and alloy-steel piping fabrication and installation, welding control, NDT coordination, coating inspection, pressure testing, and turnover documentation. Experience reviewing and implementing ITPs, WPS/PQRs, welder qualifications, NDT procedures, coating procedures, inspection requests, test packs, NCRs, punch lists, and final manufacturing or construction dossiers. Experience on Heat Treatment and Finishing Line, steelmaking, pipe manufacturing, or comparable heavy-industrial projects is preferred; Saudi Arabia or GCC project experience is an advantage.<br>Skills:Excellent technical knowledge and quality-control skills Strong leadership and contractor-management abilities Effective communication, reporting, and coordination skills Strong analytical, problem-solving, and decision-making abilities Good planning, organization, teamwork, and time-management skills

About Gulf Net Solutions (GNS) Founded in 1997, Gulf Net Solutions Company Limited (GNS) is a leading technology and engineering solutions provider headquartered in Dammam, Saudi Arabia. A wholly owned subsidiary of Ali Zaid Al Quraishi & Brothers (AZAQ), GNS delivers innovative solutions across automation, digital transformation, industrial communications, cybersecurity, and smart utility infrastructure throughout the GCC.<br>Job Summary We are seeking an experienced Senior Automation Engineer to support the execution, commissioning, and maintenance of automation systems for water utility projects across Saudi Arabia. The successful candidate will be responsible for site-based activities related to PLC, SCADA, RTU, and instrumentation systems while working closely with customers including the National Water Company (NWC) and Saudi Water Authority (SWA). The role requires strong technical expertise, field experience, troubleshooting capabilities, and direct interaction with customers during project execution and commissioning phases.<br>Key Responsibilities Lead site activities related to automation and control systems for water and wastewater projects. Perform installation, testing, commissioning, troubleshooting, and maintenance of PLC, SCADA, RTU, and instrumentation systems. Configure, program, and modify PLC and RTU applications as required for project execution. Support SCADA system integration, communication networks, and remote monitoring solutions. Conduct site surveys and assess automation system requirements. Supervise and coordinate field technicians and subcontractors during project implementation. Perform loop checking, I/O verification, FAT, SAT, and system commissioning activities. Diagnose control system faults and provide corrective actions to minimize downtime. Review and update project documentation including:I/O Lists Loop Diagrams As-Built Drawings FAT/SAT Reports Technical Reports O&M Manuals Ensure compliance with project specifications, customer requirements, and industry standards. Coordinate directly with clients and stakeholders during project execution and testing phases. Support project teams in preparing technical submittals and engineering documentation. Provide technical support and training to end users when required.<br>Required Qualifications Bachelor’s Degree in Electrical Engineering, Electronics Engineering, Instrumentation Engineering, or a related field. Minimum 7 years of experience in Automation and Control Systems, preferably within water and wastewater utility projects. Hands-on experience with PLC, SCADA, RTU, and instrumentation systems, including field devices and control panels. Experience working with Siemens, Schneider Electric (SE), SOFREL, or similar automation platforms. Strong knowledge of industrial communication protocols such as Modbus, Ethernet/IP, Profibus, Profinet, and DNP3. Proven experience in testing, commissioning, troubleshooting, and maintenance of automation and control systems. Ability to read and interpret P&IDs, control drawings, loop diagrams, and technical documentation. Previous experience working with National Water Company (NWC), Saudi Water Authority (SWA), or similar water utility clients is highly preferred. Strong communication, problem-solving, and customer-facing skills. Willingness to travel and work at project sites as required.<br>Preferred Experience Previous experience working with:National Water Company (NWC) Saudi Water Authority (SWA) Experience in water transmission, pumping stations, reservoirs, desalination, or wastewater facilities. Knowledge of telemetry and remote monitoring systems. Familiarity with cybersecurity considerations for industrial control systems.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Senior Road &amp; Civil Engineer will provide technical leadership and site supervision for road and civil infrastructure construction activities associated with utility projects. <span>The</span> <span>successful</span> <span>candidate</span> <span>will</span> <span>work</span> <span>closely</span> <span>with</span> <span>contractors,</span> <span>clients,</span> <span>and</span> <span>multidisciplinary</span> <span>teams</span> <span>to</span> <span>ensure</span> <span>compliance</span> <span>with</span> <span>specifications,</span> <span>quality</span> <span>standards,</span> <span>and</span> <span>project</span> <span>schedules</span> <span>while</span> <span>supporting</span> <span>the</span> <span>successful</span> <span>delivery</span> <span>of</span> <span>critical</span> <span>infrastructure</span> <span>assets.</span></p><br><br><br>Responsibilities:<br><ul><li>Lead construction supervision activities for roads, pavements, utility corridors, drainage networks, and associated civil infrastructure works.</li><li>Monitor contractor performance and ensure compliance with approved drawings, specifications, standards, and contractual requirements.</li><li>Review and provide comments on method statements, shop drawings, material submittals, and construction schedules.</li><li>Conduct site inspections and oversee testing, commissioning, and handover activities related to civil and roadworks.</li><li>Identify technical issues during construction and provide effective engineering solutions.</li><li>Coordinate with utility, structural, geotechnical, survey, and project management teams to ensure seamless project execution.</li><li>Verify progress quantities and review contractor payment applications.</li><li>Ensure all works are performed in accordance with approved QA/QC procedures and project quality requirements.</li><li>Monitor implementation of health, safety, and environmental standards across construction activities.</li><li>Prepare technical reports, inspection reports, non-conformance reports, and site instruction records.</li><li>Participate in project meetings and provide technical recommendations to support project objectives.</li><li>Support project delivery through proactive risk management and stakeholder coordination.</li></ul><br><br>Qualifications:<br><ul><li>Bachelor's Degree in Civil Engineering from an accredited institution.</li><li>Minimum 12 years of relevant experience in road and civil infrastructure projects.</li><li>Demonstrated experience in construction supervision of utility infrastructure projects, including roads, drainage systems, utility networks, and associated civil works.</li><li>Strong knowledge of international engineering standards and construction practices.</li><li>Previous experience on large-scale infrastructure projects within the GCC region is preferred.</li><li>Proficiency in AutoCAD, Civil 3D, and Microsoft Office Suite.</li><li>Familiarity with QA/QC procedures, contract administration, and supervision consultancy services.</li><li>Excellent communication, coordination, and stakeholder management skills.</li><li>Professional registration or chartership status is preferred.</li><li>Strong command of written and spoken English; Arabic language skills are advantageous.</li></ul><p>Imagine a better future for you and a better future for us all. Work on landmark projects, collaborate with industry-leading experts, and help shape the communities of tomorrow.</p><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Sr Lab Equipment Maintenance Engineer (Liquid Chromatography - Mass Spectrometry)<br>Analytical Technologies Unit, Research Infrastructure and Equipment Maintenance<br>Summary The Senior Lab Equipment Maintenance Specialist provides professional expert service and support for high-tech/high-end laboratory research equipment by performing field service repairs, maintenance, calibrations, and alignments. He/she will be a mentor to junior maintenance personnel, and will prepare, plan and complete user maintenance and equipment operation training sessions. The Senior LEM Specialist will deliver the highest level of service to maximize equipment uptime while minimizing maintenance costs. The Senior LEM Specialist will work within guidelines established by the LEM Director and Laboratory Equipment Maintenance Leads and will follow established standard operating procedures.<br>Major Responsibilities Respond quickly to maintenance and troubleshooting requests Complete assigned work at the highest possible level of quality and in a timely manner Coordinate with end-user to schedule equipment maintenance and other services Build and maintain strategic functional and productive relationships with research equipment manufacturers and vendors Leverage relationships with the manufacturers to facilitate the necessary support and training for the team. Confer with lab equipment operators/manufacturers/agents to identify and diagnose problems and implement appropriate solutions Identify required spare parts, work with the lead to optimize stock level and assist with the ordering process. Provide sufficiently detailed, grammatically correct, and regular communications to end-users Maximize insourcing of maintenance activities and coordinate vendor visits, if necessary, while minimizing the equipment downtime. Participate in professional development trainings, seminars, and other activities to remain at a highly competent level of expertise on assigned equipment Collaborate with the team to sustain high service levels through workload sharing, cross-training, and providing mentorship. Instruct end user on preventative equipment maintenance strategies and proper instrument use Provide occasional value-added user training sessions on assigned equipment within expertise Comply with all HSE and KAUST safety policies, practices, and procedures at all times. Develop and maintain safe habits and practices with regard to safety requirements on site and in the workshop and report any breaches or concerns on health and safety matters to the appropriate supervisor Identify process improvement areas to improve efficiency and increase automation Work closely and productively with the Lab Equipment Maintenance Leads in a professional manner to define and complete any additional objectives Ability to work extended hours (as needed) Perform other job-related duties as assigned Ability to travel 10% of the time for training and external services<br>Personal Requirements Competencies Demonstrated ability to effectively troubleshoot major electrical and mechanical components of research instruments and equipment and make repairs in a timely manner Demonstrated professional customer service skills and etiquette A strong sense of urgency in executing and completing assigned work Efficiently manages a varied workload while under pressure; accomplishing tasks with minimal supervision Demonstrated effective leadership ability Team player with a flexible can-do attitude Excellent problem solving and analytical skills Strong planning and organizational skills Ability to communicate in a clear and concise manner Excellent command of the English language (read, write and speak English) Ability to work effectively in a multi-cultural international environment and help foster a cooperative work environment Highly proficient in Microsoft Office applications Ability to develop high quality Standard Operating Procedures (SOPs)<br>Qualifications Essential: Bachelor’s degree in science or engineering Factory service training in the class of equipment covered by the unit Proficiency with Microsoft Office Suite Preferable:Proficiency with using a computerized maintenance management system (CMMS) such as SAP. Training in quality systems such as ISO 9001:2015, Six Sigma and Lean principles.<br>Experience Minimum 7 years’ experience as a field service engineer or in-house maintenance engineer performing service-level maintenance and repairs on Liquid chromatography–mass spectrometry (LC–MS) from Bruker covering the following models:Fourier Transform Ion Cyclotron Resonance (FT-ICR), Trapped Ion Mobility Spectrometry combined with Time-of-Flight (TIMS-TOF), Quadrupole Time-of-Flight (Q-TOF) and Matrix-Assisted Laser Desorption Ionization - Time of Flight (MALDI-TOF) Experience with other major manufacturers is considered a plus Experience providing service to academic organizations is considered a plus

At Indra Group, we protect what matters most. We lead the development of cutting-edge technology solutions that strengthen national and international security, supporting our clients with reliable technical operations and outstanding service quality on the ground.<br>???? Join our Technical Support team! As a leading company in the defense and technology sector, we are looking to strengthen our team in Saudi Arabia with an AFC Support Engineer who can resolve advanced technical issues, troubleshoot complex software and hardware problems, and maintain strong client relationships through effective communication and documentation.<br>????What will you do? Resolve advanced technical issues across software and hardware systems. Troubleshoot and diagnose complex problems efficiently and accurately. Provide detailed solutions and maintain thorough technical documentation. Collaborate cross-functionally with other departments to ensure timely issue resolution. Escalate unresolved issues to L3 support or specialized teams when necessary. Maintain a high level of customer satisfaction through professional, clear communication.<br><br>????What are we looking for? Don’t worry if you don’t meet 100% of what we’re looking for. Go ahead, get to know our offer and tell us what you can bring! ????:✅ Bachelor’s degree in Computer Science or a related field.✅ Strong proficiency in Java and SQL/database querying.✅ Experience with HTML, CSS, Java Script, and frameworks such as Angular.js or Node.js.✅ Familiarity with Linux and Windows operating systems.✅ Knowledge of HTTP protocols and XML/XPath.✅ Fluency in English and Arabic.✅ Minimum 2 years of relevant experience.<br>What we offer Stability and Future ????✨: Long-term projects in a leading Defense company with more than 65,000 professionals, with financial security. International, High-Impact Projects ????: You will work in an international environment, with impact both nationally and globally. Close-Knit, Transparent Environment ????: You will enjoy direct, fluid communication with managers and colleagues, in a collaborative and open environment. Autonomy and Responsibility⏳: You will have the freedom to organize your work within a role of technical responsibility and growth. Career Plan Tailored to You ????: Designed to drive your professional growth and development. Competitive Compensation ???? and flexible compensation plans tailored to your needs.<br>Our commitment is to promote work environments where people are treated with respect and dignity, fostering the professional development of our workforce and guaranteeing equal opportunities in selection, training, and promotion, while providing a work environment free from any discrimination based on gender, age, disability, sexual orientation, gender identity or expression, religion, ethnicity, marital status, or any other personal or social circumstance.<br>INDRA is a Top Employer 2026 certified company! Join a company recognized as one of the best employers in Spain, thanks to our comprehensive HR management and the conditions we offer our professionals.

We're Hiring: Mid-Level . NET Backend Developer Are you passionate about building scalable, secure, and high-performance backend applications? We're looking for a Mid-Level . NET Backend Developer with around 3 years of professional experience to join our growing engineering team.<br>What You'll DoDesign, develop, and maintain RESTful APIs using . NET 8+. Build scalable backend services with clean, maintainable code. Collaborate with frontend developers, QA engineers, and product teams. Optimize application performance, security, and reliability. Design and optimize SQL Server/Postgre SQL databases. Participate in code reviews, architecture discussions, and Agile ceremonies. Work with caching, messaging, and background processing technologies.<br>What We're Looking For Around 3 years of professional experience with . NET backend development. Strong knowledge of C#, ASP. NET Core, Entity Framework Core, and SQL. Experience with REST APIs, JWT Authentication, and Swagger/Open API. Good understanding of Clean Architecture, SOLID Principles, and design patterns. Experience with Redis, Rabbit MQ, Docker, Git, and CI/CD. Experience with Microsoft Azure or AWS. Strong problem-solving skills and a collaborative mindset.<br>Nice to Have Experience with Microservices. Signal R. Kafka or Azure Service Bus. Mongo DB. Basic knowledge of Kubernetes.<br>If you're passionate about building modern backend systems and enjoy working in a collaborative environment, we'd love to hear from you!

An Estimation Engineer (or Cost Estimator) projects the total cost of a construction, engineering, or manufacturing project before work begins. They analyze technical plans, material needs, labor requirements, and market conditions to build competitive bids and ensure profitability. An Estimation Engineer typical job description covers key responsibilities and required qualifications:Key Responsibilities Take-Offs & Quantity Surveying: Extract material quantities, labor hours, and equipment needs from engineering drawings, blueprints, and project specifications. Cost Estimation & Analysis: Calculate total project costs—including direct costs (materials, labor, plant) and indirect costs (overheads, contingencies, escalation, profit margins). Vendor & Subcontractor Management: Solicit, review, and negotiate quotations from suppliers and subcontractors to secure competitive pricing. Tender & Bid Preparation: Prepare technical and commercial proposals, fill out Bills of Quantities (BOQs), and ensure full compliance with client submission guidelines. Risk Assessment: Identify potential financial, technical, or schedule risks in contract documents and factor contingency allowances into cost models. Site & Market Research: Conduct site visits to assess working conditions, access, and site-specific logistics that impact pricing. Post-Tender Support: Participate in tender clarification meetings, value engineering discussions, and assist project management teams during the handover phase. Required Skills & Qualifications Education: Bachelor’s degree in Civil, Mechanical, Electrical, or Industrial Engineering (or Quantity Surveying/Construction Management). Software Proficiency: Auto CAD, Primavera P6/MS Project, Excel (advanced), and specialized estimation software (e.g., Cost X, Candy, Bluebeam, or Plan Swift). Key Competencies: Strong analytical math skills, deep understanding of engineering drawings/contracts (FIDIC), market rate awareness, and negotiation skills.

Lead Communications Engineer<br>Responsibilities:<br>FUNCTIONAL RESPONSIBILITIES<br>Coordinates with Senior Communications Engineers to ensure correct implementation of the project design and coordinates the work of engineers within his specialty. Prepares and reviews communications engineering studies, design drawings, calculations and documents, and material and equipment specifications. Resolves specialty related communications engineering issues by applying accepted principles, codes, and standards. Analyzes problems and determines critical factors for investigation. Organizes and conducts investigations and analysis. Participates in the development of new communications engineering methods. Provides expert advice on design processes or construction methods. Approves significant changes in specifications and plans, work techniques and materials. Determines and schedules work priorities. Prepares communications engineering proposals estimates. Ensures quality plans are implemented.<br><br>AUTHORITY/LEADERSHIP RESPONSIBILITIES<br>Provides technical guidance to co-workers. Proposes staffing solutions and training and development opportunities. Organizes and supervises work of a large group of professionals and non-professionals, or small groups of highly specialized engineers. Provides input into performance evaluations and makes recommendations on staffing activities. Being accountable for unit deliverables. Approves timesheets.<br>Requirements:<br>BS in Engineering and registered as a professional engineer with 15 years of significant experience. Has experience in the oil/gas, hydrocarbon, refinery, offshore, or infrastructure industries and is recognized as specialist in communications engineering field on large to mega projects. Must have thorough knowledge of communications engineering practices and economic principles, calculation methods, design details, international codes and standards, procedures, and specifications. Excellent communication skills. Has a currently valid Building Industry Consulting Services International (BICSI) Registered Communications Distribution Designer (RCDD) certification.

Company Overview:<br>DCP is a multi-national company, with operations in over 20 countries, and over 90 years of experience serving the construction industry with innovative products and solutions. The company specializes in developing, manufacturing, and marketing innovative construction materials, and offer one of the most extensive product ranges on the market.<br>Position Overview:<br>We are seeking a Sales Engineer to join our team in Jeddah, Saudi Arabia. This full-time, on-site role involves promoting and selling DCP’s products, providing technical support, and ensuring customer satisfaction. The Sales Engineer will engage with clients, deliver product presentations, and collaborate with internal teams to meet sales targets.<br>Responsibilities:<br>Identify and develop new clients and business opportunities. Build and maintain strong, long-term relationships with existing customers. Provide pre-sales technical support and assist customers with product information and solutions. Prepare, submit, and follow up on price quotations and commercial offers. Achieve assigned sales targets and KPIs. Manage payment follow-up and support the collection process. Conduct customer visits and support the sales team in promoting company products. Follow up on customer inquiries, offers, and project requirements.<br>Qualifications:<br>Bachelor's degree in civil engineering. Fresh graduates or up to 2 years of relevant experience. Ability to work independently and travel as required. Very good command of English, both written and spoken. Valid driver’s license. Saudi nationality only.<br>Key Competencies:<br>Strong communication, negotiation, and customer service skills. Problem-solving and organizational abilities. Knowledge of construction chemicals and building materials is a plus.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Company:</b> GPR Contracting is looking to attract exceptional engineering talents to be part of its team in the Kingdom of Saudi Arabia. We are searching for professionals with experience and a passion for contributing to the success of our major projects.</p><p><br></p><p><b>Position Required:</b></p><ul><li><b>Mechanical Engineer</b></li></ul><p><b>Basic Requirements:</b></p><ul><li><b>Experience:</b> Minimum of 10 years in the field of contracting and construction projects.</li><li><b>Professional Registration:</b> Valid registration and active participation in the Saudi Council of Engineers (SCE).</li><li><b>Location:</b> Available only for residents within the Kingdom of Saudi Arabia (with the possibility of transferring sponsorship).</li></ul><p><br></p><p><b>Benefits and Salary:</b></p><ul><li><b>Salary:</b> To be determined after the personal interview (based on experience and competency).</li><li><b>Features:</b> A professional work environment that supports continuous professional development.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Required Skills:</b></p><ul><li>High ability to manage sites and supervise execution.</li><li>Monitoring engineering plans with high accuracy.</li><li>Strong skills in project management.</li></ul><p><br></p></div>

Company Description MAB UNITED TRD. & CONT. CO. is a well-established company with a strong focus on delivering high-quality products and services. Operating in a dynamic and competitive market, the company values innovation, customer satisfaction, and technical expertise. Serving a diverse clientele, MAB UNITED combines technical solutions with business acumen to meet industry needs effectively. With a commitment to excellence, the company is a trusted partner in its field. Role Description This is a full-time, on-site role for a Sales Engineer based in Riyadh. The Sales Engineer will manage technical consultations, provide pre- and post-sales support, and collaborate with the sales team to identify customer requirements. Responsibilities include presenting and demonstrating product solutions, assisting with technical inquiries, and ensuring customer satisfaction through effective service and communication. The role also involves maintaining strong customer relationships to drive business growth. Qualifications Proficiency in Sales Engineering and Technical Support to evaluate technical requirements and deliver customized solutions Strong Sales and Customer Service skills for building client relationships and ensuring customer satisfaction Excellent Communication skills to articulate technical concepts to both technical and non-technical audiences Ability to adapt to a fast-paced environment and manage multiple tasks effectively Bachelor’s degree in Engineering or a related field is preferred Proven experience in a similar role is an advantage3-5 years experience in projects sales related to sanitary and lighting / fit out products

Company Overview:DCP is a multi-national company, with operations in over 20 countries, and over 90 years of experience serving the construction industry with innovative products and solutions. The company specializes in developing, manufacturing, and marketing innovative construction materials, and offer one of the most extensive product ranges on the market.<br><br>Position Overview:We are seeking a Sales Engineer to join our team in Jeddah, Saudi Arabia. This full-time, on-site role involves promoting and selling DCP’s products, providing technical support, and ensuring customer satisfaction. The Sales Engineer will engage with clients, deliver product presentations, and collaborate with internal teams to meet sales targets<br>.<br>Responsibilities Identify and develop new clients and business opportunities. Build and maintain strong, long-term relationships with existing customers. Provide pre-sales technical support and assist customers with product information and solutions. Prepare, submit, and follow up on price quotations and commercial offers. Achieve assigned sales targets and KPIs. Manage payment follow-up and support the collection process. Conduct customer visits and support the sales team in promoting company products. Follow up on customer inquiries, offers, and project requirement<br>s.<br>Qualificati<br>ons<br>Bachelor's degree in civil engineering. Fresh graduates or up to 2 years of relevant experience. Ability to work independently and travel as required. Very good command of English, both written and spoken Valid driver’s license. Saudi nationality o<br>nly.<br>Key Competen<br>cies:<br>Strong communication, negotiation, and customer service skills. Problem-solving and organizational abilities. Knowledge of construction chemicals and building materials is a<br> plus.

Architect Engineer Location: Riyadh, Saudi Arabia<br>About the Opportunity<br>Our client is a leading architectural design consultancy based in Riyadh, recognized for delivering innovative architectural, interior, and exterior design solutions across high-quality residential and mixed-use developments. As part of its continued growth, the company is looking to hire a talented Architect Engineer to join its dynamic design team. This is an excellent opportunity for a creative architect who is passionate about concept design, façade development, and delivering exceptional architectural solutions within a collaborative design environment.<br>Key Responsibilities<br>Develop creative architectural concepts and design solutions for residential and Residential and multi-sector developments. Lead and contribute to façade design and architectural development throughout all design stages. Prepare concept, schematic, and design development packages. Produce high-quality architectural presentations and design documentation. Develop and coordinate BIM/Revit models throughout the design process. Collaborate with multidisciplinary teams to ensure design quality and project integration. Support the delivery of projects while maintaining high design standards.<br>Requirements<br>Bachelor's Degree in Architecture or Architectural Engineering.4–6 years of experience within an architectural design consultancy. Strong experience in concept design, façade design, and design development. Proven experience delivering residential and Residential and multi-sector developments projects. Advanced proficiency in Autodesk Revit and BIM workflows. Excellent presentation and communication skills.<br>Preferred Qualifications<br>Experience working on projects in Saudi Arabia or the GCC. Saudi nationals are preferred; however, qualified candidates of all nationalities are encouraged to apply. Portfolio submission is mandatory.

Job Title: Lead Cloud Engineer (Hybrid Cloud) Industry: Financial Services Level: Lead / Senior Role Location: Riyadh, KSA<br>Role Overview We are seeking an experienced Lead Cloud Engineer with 8+ years of experience and a strong background in financial services to define, own, and execute our hybrid cloud strategy. This is a lead technical role requiring deep, hands-on expertise across on-premise, hybrid, and cloud environments, with proven success delivering secure, compliant on-prem to cloud migrations in regulated environments.<br>Key Responsibilities Lead the architecture and management of hybrid cloud environments (on-prem + cloud) Own and execute on-prem to cloud migrations with minimal business risk Design secure cloud landing zones, networking, and identity integrations Optimize cloud cost, performance, reliability, and scalability Ensure high availability, resilience, security, and performance across cloud platforms Lead infrastructure lifecycle management, including capacity planning, patching, and upgrades Act as the senior technical authority for cloud and infrastructure decisions Drive Infrastructure as Code (IaC) adoption and automation practices Support CI/CD pipelines and modern application delivery models<br>Technical Skills VMware virtualization platforms Enterprise networking and security Google Cloud Platform (GCP) Infrastructure as Code (Terraform) CI/CD tools and automation Scripting: Power Shell, Bash, Python Monitoring and logging platforms<br>Required Experience & Qualifications Minimum 8+ years of IT Infrastructure and Cloud experience Mandatory experience in the financial services industry Proven ownership of on-prem to cloud migrations Strong expertise in VMware and enterprise networking Hands-on experience with GCPExperience working in regulated, audit-driven environments

We have partnered with a Tier 1 Architectural and Engineering Consulting firm in Riyadh, KSA who are looking to hire an experienced Resident Engineer to lead the successful delivery of high-profile projects.<br>As the Resident Engineer, you will oversee the construction process to ensure design intent is accurately implemented, contractual requirements are met, and projects are delivered with the highest standards of quality, safety, and efficiency.<br>Key Responsibilities:Lead site supervision, contract administration, and construction management activities. Coordinate with the Design Manager, Project Management team, Client Representatives, and Contractors. Chair site progress meetings and monitor project performance. Review and approve technical submittals, material submittals, shop drawings, RFIs, method statements, procedures, as-built drawings, and inspection requests. Monitor contractors' progress to ensure compliance with project specifications, quality standards, budgets, and schedules. Ensure effective administration of contracts in accordance with FIDIC conditions.<br>Requirements:B. Sc. in Civil Engineering from a recognized university. Minimum 20 years of relevant experience, including 15 years on similar projects. At least 10 years of experience in Saudi Arabia. Certified member of the Saudi Council of Engineers. Extensive experience delivering high-rise buildings and hotel projects. Strong knowledge of FIDIC Contracts and construction/site management. Transferable Iqama is required. Previous experience with a leading consultancy firm in the Gulf region is highly desirable Excellent written and spoken English; Arabic is an advantage.<br>If you have the expertise to lead complex construction projects and are looking to join a dynamic, multidisciplinary consultancy, we'd love to hear from you.

<p>Parsons is looking for an amazingly talented Civil Lead Engineer to lead the civil engineering design review, technical coordination, construction support, and multidisciplinary integration activities for a major Airport, Infrastructure, and Airfield Development Project. The successful candidate will be responsible for overseeing the planning, review, and delivery of civil infrastructure associated with passenger terminals, runways, taxiways, cargo aprons, aircraft parking stands, landside developments, utility corridors, road networks, and airport support facilities. The Civil Lead Engineer will provide technical leadership throughout the project lifecycle, ensuring that all civil engineering works comply with project requirements, international standards, airport operational requirements, and industry best practices while supporting the Delivery Partner in achieving safe, efficient, and successful project delivery.</p><p>What You'll Be Doing:</p><ul><li>Lead and coordinate all civil engineering activities across the airport development program, ensuring alignment with project objectives, technical requirements, and delivery milestones.</li><li>Provide technical leadership and guidance to multidisciplinary engineering teams throughout design, construction, testing, and project closeout.</li><li>Ensure civil engineering deliverables comply with contractual obligations, project specifications, and client requirements.</li><li>Support engineering planning, resource allocation, and technical governance across civil engineering disciplines.</li><li>Lead the review of civil engineering designs, calculations, technical reports, drawings, specifications, and engineering submissions.</li><li>Review grading, earthworks, utility corridors, retaining structures, site development, drainage interfaces, and civil infrastructure designs.</li><li>Ensure compliance with applicable international standards, local authority regulations, airport engineering requirements, and client specifications.</li><li>Support value engineering initiatives to optimize constructability, sustainability, operational efficiency, and long-term asset performance.</li><li>Coordinate civil engineering works associated with passenger terminals, runways, taxiways, cargo aprons, aircraft parking stands, maintenance facilities, and airport support infrastructure.</li><li>Review airfield grading, site development, pavement interfaces, service roads, utility corridors, and landside infrastructure.</li><li>Ensure seamless integration between civil infrastructure and operational airport facilities.</li><li>Support phased construction planning while maintaining airport operational continuity where applicable.</li><li>Coordinate civil engineering interfaces with Structural, Architectural, Mechanical, Electrical, Airfield, Wet Utilities, ICT, Security, Traffic Systems, and Environmental disciplines.</li><li>Participate in multidisciplinary design coordination meetings and BIM model reviews.</li><li>Identify and resolve engineering conflicts, design clashes, and interface issues.</li><li>Support digital engineering and Common Data Environment (CDE) initiatives.</li><li>Provide technical support during construction, installation, testing, commissioning, and handover activities.</li><li>Review contractor shop drawings, material submittents, RFIs, method statements, and technical queries.</li><li>Conduct site inspections to verify compliance with approved civil engineering designs and project specifications.</li><li>Resolve technical issues affecting construction progress, quality, and project delivery.</li><li>Coordinate with the Client, airport authorities, consultants, contractors, utility providers, and regulatory agencies on civil engineering matters.</li><li>Support technical approvals, engineering reviews, permits, and authority submissions.</li><li>Participate in technical workshops, coordination meetings, and design review sessions.</li><li>Ensure effective management of civil engineering interfaces across all project stakeholders.</li><li>Ensure all civil engineering works comply with project quality standards, engineering specifications, contractual requirements, and regulatory codes.</li><li>Participate in technical audits, engineering reviews, inspections, and quality assurance activities.</li><li>Monitor contractor compliance with approved procedures and construction methodologies.</li><li>Support implementation of continuous improvement initiatives and engineering best practices.</li><li>Prepare and review engineering reports, technical assessments, progress updates, design review comments, and engineering recommendations.</li><li>Monitor engineering progress against project schedules and delivery milestones.</li><li>Maintain accurate records of engineering decisions, design reviews, approvals, technical risks, and site observations.</li><li>Provide regular engineering updates to Project Management regarding progress, risks, technical issues, and mitigation measures.</li><li>Promote a strong Health, Safety, and Environmental (HSE) culture throughout all civil engineering activities.</li><li>Ensure civil engineering designs incorporate Safety-in-Design principles and support airport operational safety requirements.</li><li>Support compliance with project HSE procedures, environmental regulations, and sustainability objectives.</li><li>Participate in constructability reviews, risk assessments, and continuous improvement initiatives.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Degree in Civil Engineering or a related Engineering discipline. Master's Degree in Civil Engineering or Infrastructure Engineering is considered an advantage. Minimum 10 years of experience in civil engineering design, design review, construction supervision, and multidisciplinary coordination on major infrastructure projects. Proven experience on international airport developments , including passenger terminals, runways, taxiways, cargo aprons, airfield infrastructure, landside developments, and utility corridors. Strong experience supporting major transportation, aviation, or large-scale infrastructure programs. Demonstrated experience leading multidisciplinary engineering teams and coordinating with clients, consultants, contractors, and regulatory authorities. Strong knowledge of civil engineering design principles, construction methodologies, and infrastructure delivery. Thorough understanding of airport engineering requirements, airfield infrastructure, grading, site development, drainage coordination, and utility integration. Familiarity with ICAO, FAA, AASHTO, BS/EN standards, local authority requirements, and international engineering best practices. Experience with Civil 3D, AutoCAD, OpenRoads Designer, BIM platforms, and Common Data Environment (CDE) workflows. Strong analytical, technical review, problem-solving, and decision-making capabilities. Excellent communication, stakeholder management, and multidisciplinary coordination skills. Ability to manage multiple engineering priorities within complex airport development programs. Professional Engineer (PE), Chartered Engineer (CEng), or equivalent professional registration. Experience on major international airport expansion or greenfield airport development projects. Knowledge of ICAO Annex 14, FAA Advisory Circulars, and international airport planning and design standards. Experience working under FIDIC or similar international contract frameworks. Familiarity with Design-Build, EPC, PMC, or Delivery Partner project delivery models. Experience in digital engineering, BIM collaboration, and engineering information management. Strong leadership, stakeholder engagement, and authority liaison experience.</p>

TEAM Group is seeking an experienced Civil Engineer to support the opening of its new branch in Riyadh.<br>Key Responsibilities:Support civil engineering design and review activities Coordinate with multidisciplinary teams and external stakeholders Ensure compliance with local regulations and engineering standards Provide technical support to the Tender Department in the preparation and submission of technical proposals and bid documentation. Support the Branch Manager in business development activities, including client engagement, market analysis, and identification of new business opportunities. Contribute to technical development and operational startup of the Riyadh branch<br>Requirements:Saudi nationality Bachelor’s degree in Civil Engineering Registered with the Saudi Council of Engineers Minimum 5 years of proven experience in civil engineering design and/or project execution Strong technical background in engineering design, codes, and standards Ability to work independently and contribute to the setup and growth of a new branch<br>What We Offer:Opportunity to play a key role in the launch of TEAM Group’s new Saudi branch Professional growth within an international engineering group Competitive compensation package<br>Qualified candidates are invited to apply and join TEAM Group in shaping impactful engineering projects in Saudi Arabia.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>JOB PURPOSE</span> <p><span>The <b>Port Engineer</b> is a specialized field technical supervisor responsible for the coordination and execution of maintenance activities for assigned Offshore Support Vessels (OSVs). The core mandate is to ensure the assigned vessels maintain a state of continuous Saudi Aramco technical readiness and operational uptime. This is achieved by supervising maintenance quality, managing day-to-day repairs, and providing technical guidance to vessel crews to ensure compliance with company and client standards.</span></p> <span>Key Responsibilities &amp; Accountabilities</span> <span>1. Operational Execution &amp; Maintenance</span> <p><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><b><span>Maintenance Supervision:</span></b><span> Oversee routine, corrective, and urgent emergency maintenance activities for assigned vessels. Assist in troubleshooting technical faults to minimize vessel off-hire time.</span></p> <p><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><b><span>PMS Compliance:</span></b><span> Monitor and drive compliance with the Planned Maintenance System (PMS/CMMS). Verify that planned work is completed and technical records are accurately maintained.</span></p> <p><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><b><span>Logistics &amp; Field Support:</span></b><span> Coordinate with local contractors, workshops, and shore teams at the Tanajib base to facilitate the efficient delivery of spares and technical services.</span></p> <p><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><b><span>Cost Monitoring:</span></b><span> Monitor maintenance spending for assigned vessels, ensuring repairs are conducted cost-effectively and in line with procurement policies.</span></p> <span>2. ARAMCO Compliance and Vetting Readiness</span> <p><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><b><span>Vetting Support:</span></b><span> Assist in the technical preparation for all client and regulatory surveys, including Saudi Aramco Vetting, LIMS inspections, and quarterly Marine Specialist audits.</span></p> <p><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><b><span>Regulatory Assurance:</span></b><span> Verify technical compliance with all statutory, Flag State, Class, and ISM/ISPS requirements, specifically adhering to Aramco marine standards.</span></p> <p><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><b><span>Incident Support:</span></b><span> Support technical investigations and Root Cause Analysis (RCA) for equipment failures, ensuring fixes are implemented and findings are reported to the Technical Superintendent.</span></p> <p><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><b><span>Documentation:</span></b><span> Ensure all technical logs and maintenance records are accurate and ready for immediate inspection by regulatory bodies or clients.</span></p> <span>3. Reporting &amp; Technical Guidance</span> <p><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><b><span>Communication:</span></b><span> Provide regular technical status reports to the Technical Superintendent regarding vessel readiness, maintenance progress, and operational risks.</span></p> <p><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><b><span>Crew Support:</span></b><span> Act as a technical resource for onboard Chief Engineers, providing guidance to enhance troubleshooting and technical self-sufficiency.</span></p> <p><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><b><span>Handover Protocol:</span></b><span> Monitor the execution of technical handover procedures between incoming and outgoing Chief Engineers.</span></p> <p><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><b><span>Relief Duty:</span></b><span> Maintain a valid Chief Engineer Unlimited CoC to serve as a qualified relief if operational necessity dictates.</span></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><span>Education Qualifications</span> <p><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><b><span>Essential:</span></b><span>Bachelor's degree in marine engineering, Mechanical Engineering, or a related technical field from a recognized institution.</span></p> <span>Years of Experience</span> <p><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><b><span>Sea-Going Experience:</span></b><span> Minimum of <b>48 months</b> of active sea-going experience as <b>Chief Engineer</b> on Offshore Support Vessels </span></p> <p><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><b><span>Industry Experience:</span></b><span> Minimum of <b>8-10 years</b> of progressive experience in the marine industry.</span></p> <p><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><b><span>Vetting Knowledge:</span></b><span> Practical experience with major client vetting procedures (e.g., Saudi Aramco Vetting, LIMS). Experience in the Tanajib area is preferred.</span></p> <span>Certifications &amp; Skills</span> <p><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><b><span>Certification:</span></b><span> Possession of a valid <b>Chief Engineer Unlimited</b> Certificate of Competency (CoC) (STCW III/2).</span></p> <p><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><b><span>Technical Knowledge:</span></b><span> Working knowledge of DP Maintenance and FMEA/Annual DP Trials.</span></p> <p><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><b><span>Software Proficiency:</span></b><span> Proficiency in planned maintenance software (e.g., AMOS, TM Master, NS5).</span></p> <p><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><b><span>Language:</span></b><span> English fluency is mandatory (written and spoken).</span></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are hiring for the following position:</p><p><br></p><ul><li>Structural Design Engineer</li><li>Saudi Nationals are preferred for this position</li><li>Candidates must be willing to work in remote area</li></ul><p><br></p><p>Job Details:</p><ul><li>Bachelor of Science Degree in <b>Civil or Structural Engineering </b>or equivalent acceptable by User Organization. </li><li>Must have pass National Licensure or equivalent and possess a current license as Registered Engineer.·&nbsp;&nbsp;</li><li>Knowledgeable in <b>structural design calculation</b> related software (preference in STAAD-Pro).</li><li>Shall be well verse with International Building Codes, ACI 318, ASD, L&amp;RFD, AISC, ASCE 7 and other related Engineering and Construction Codes and Standards</li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Minimum 1 year experience from the date of qualification in design and engineering office as structural design engineer.</li><li>Structural design software</li></ul></div>

<p><br></p><p>Position: Cost Control Engineer</p><p>Eligibility: Only Indian candidates currently available in India</p><p>Mandatory Requirements:</p><ul><li>Minimum 3+ years of relevant experience with Saudi Aramco project experience</li><li>Must have experience in Oil &amp; Gas / Pipeline Projects</li></ul><p>Key Responsibilities:</p><ul><li>Develop &amp; maintain project budgets and cost plans</li><li>Monitor project expenditures vs approved budgets</li><li>Prepare cost reports, forecasts &amp; cash flow projections</li><li>Analyze cost variances and control overruns</li><li>Coordinate with project, procurement &amp; finance teams</li><li>Review contracts, invoices &amp; purchase orders</li><li>Support planning &amp; scheduling activities</li><li>Prepare EVA &amp; performance reports</li><li>Assist in risk assessment &amp; cost control strategies</li><li>Ensure compliance with company &amp; project standards</li><li>Maintain cost databases &amp; documentation</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum 3+ years of relevant experience with Saudi Aramco project experience</li><li>Must have experience in Oil &amp; Gas / Pipeline Projects</li></ul>