Cost Engineer Jobs in Saudi

<h3 >About Abdullah A. Al-Barrak &amp; Son Co.</h3> <p >Abdullah A. Al-Barrak &amp; Son Co. is seeking a <strong >Lead Electrical Engineer</strong> to join their team in Al Khobar, Eastern Province. This full-time position is integral to projects within the Oil and Gas, Petrochemicals, and Power industries, operating within an Engineering, Procurement, and Construction (EPC) environment.</p> <h3 >Role Summary</h3> <p >The Lead Electrical Engineer will lead the Electrical discipline, actively participating in proposal and bidding processes. This role provides essential technical support during construction and commissioning phases as required. Engineering is a core expertise, demanding active daily involvement during the engineering phase on single or multiple projects on a shared basis.</p> <h3 >Key Responsibilities</h3> <ul > <li >Plan, schedule, monitor, and control all engineering activities for the Electrical discipline.</li> <li >Facilitate interdisciplinary coordination and support team building exercises.</li> <li >Proactively highlight any issues or problems to management to enable timely remedial action.</li> <li >Actively participate in progress review meetings, technical meetings, client meetings, and vendor meetings.</li> <li >Support Procurement-related activities such as raising Material Requisitions (MR), Technical Bid Clarification/Evaluation (TBC/TBE), and Draft Purchase Requisitions.</li> <li >Support the bidding team by raising RFQs, conducting technical evaluation of bids, and performing cost estimation.</li> <li >Support construction by responding to construction site-related technical queries (tQ).</li> <li >Review and comment on GES plus engineering deliverables on a case-by-case basis.</li> <li >Ensure the safety and quality of deliverables.</li> <li >Participate in Value Engineering practices such as value engineering, lessons learned sessions, Risk Assessment/Management Studies and workshops, and Constructability studies and workshops.</li> <li >Ensure customer satisfaction and appreciation, thereby enhancing the company's reputation and image, and facilitating repeated orders and goodwill.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A Bachelor’s degree in Electrical Engineering (BS, BE, or B Tech), complemented by relevant training and certification courses.</li> <li >A minimum of <strong >10 years of combined experience</strong> in the Oil and Gas, Petrochemicals, and Power Industry.</li> <li >Demonstrated experience working with GES plus/EPC Contractors on Saudi Aramco jobs, SABIC, and other reputed organizations.</li> <li >Experience attending Factory Acceptance Test (FAT)/Site Acceptance Test (SAT) activities and supporting pre-commissioning activities.</li> </ul> <h3 >Work Environment</h3> <p >This role is based in Al Khobar, Eastern Province, and operates within a full-time capacity. The work involves active engagement in an EPC environment, collaborating with various disciplines and stakeholders across multiple projects in critical industrial sectors.</p> <h3 >Application Information</h3> <p >Qualified candidates are invited to apply. Salary details for this position will be discussed during the interview process.</p>

The Presales Engineer owns the technical side of the bid process. The role is responsible for translating client requirements, tender documents, and site conditions into costed, compliant, practical, and buildable solutions across ICT infrastructure and physical security / ELV systems. The Presales Engineer will develop technical designs, drawings, BOQs, compliance statements, and technical proposals that support successful bids, while ensuring a smooth handover to the project delivery team. Key Responsibilities Analyse RFPs, RFIs, tender specifications, drawings, and site conditions to identify scope, gaps, risks, and requirements. Design end-to-end ICT infrastructure and physical security / ELV solutions. Prepare technical designs, Auto CAD drawings, BOQs, material take-offs, compliance matrices, and technical proposals. Perform technical calculations for CCTV coverage, VMS storage, bandwidth, PoE, UPS, fibre links, rack elevations, heat loads, cable lengths, and pathway capacity. Select appropriate products and technologies based on technical requirements, cost, lifecycle, licensing, and client standards. Conduct site surveys, walk-downs, and as-built verification. Present solutions to clients, consultants, and end users and participate in technical clarification meetings. Coordinate with OEMs and distributors for technical support, pricing, product information, and authorisations. Support demonstrations, proof-of-concepts, and pilot setups. Provide a complete technical handover to the project delivery team and support submittals, RFIs, and design changes during execution.<br>Requirements5+ years of experience in presales, solution design, or design engineering within a systems integrator, ELV contractor, or technology vendor. Demonstrable experience managing tenders end-to-end, including solution design, BOQ, compliance statements, and technical proposals. Strong knowledge of structured cabling, copper and fibre infrastructure, LAN/WAN, switching, routing, VLANs, PoE, Wi-Fi, and data centre/server room infrastructure. Strong knowledge of CCTV, VMS, access control, intrusion detection, intercom, barriers, turnstiles, and ELV systems. Experience with VMS platforms such as Milestone, Genetec, Bosch, Axis, Hanwha, Hikvision, or equivalent. Proficiency in Auto CAD and experience producing technical drawings to a professional production standard.<br>Why Join Us? Work on exciting projects across ICT infrastructure, physical security, and ELV systems. Gain exposure to diverse clients and projects across different sectors and environments. Be part of a technical and collaborative team where your ideas and expertise are valued. Grow your skills and career through hands-on experience with leading technologies and solutions. Work closely with clients, consultants, OEMs, and industry experts. Take ownership and make an impact from solution design through to project delivery. Build your professional profile by working on complex, high-quality technology projects. Strong skills in Excel, Word, Power Point, and Visio. Familiarity with relevant ICT, security, and ELV standards and local regulatory requirements. Bachelor’s degree in Electrical, Electronics, Telecommunications, Computer Engineering, or equivalent experience. Valid driving licence and willingness to travel to client and project sites.<br>What We're Looking For A technically strong and commercially aware Presales Engineer who can take ownership of the complete bid process. Someone who can translate complex client requirements into practical, compliant, and cost-effective solutions. Strong analytical and problem-solving skills with excellent attention to detail. Excellent technical writing, presentation, and communication skills. Ability to work effectively with clients, consultants, vendors, commercial teams, and project delivery teams. A proactive individual who can manage multiple tenders and deadlines while maintaining a high standard of quality. Strong understanding of both technical design and commercial considerations. A team player who takes ownership from initial enquiry through to successful project handover.<br><br>Skills: 5+ years of experience in presales, solution design, or design engineering within a systems integrator, ELV contractor, or technology vendor. <br> <br>Demonstrable experience managing tenders end-to-end, including solution design, BOQ, compliance statements, and technical proposals. <br> <br>Strong knowledge of structured cabling, copper and fibre infrastructure, LAN/WAN, switching, routing, VLANs, PoE, Wi-Fi, and data centre/server room infrastructure. <br> <br>Strong knowledge of CCTV, VMS, access control, intrusion detection, intercom, barriers, turnstiles, and ELV systems. <br> <br>Experience with VMS platforms such as Milestone, Genetec, Bosch, Axis, Hanwha, Hikvision, or equivalent. <br> <br>Proficiency in Auto CAD and experience producing technical drawings to a professional production standard. <br> Why Join Us? <br> Work on exciting projects across ICT infrastructure, physical security, and ELV systems. <br> Gain exposure to diverse clients and projects across different sectors and environments. <br> Be part of a technical and collaborative team where your ideas and expertise are valued. <br> Grow your skills and career through hands-on experience with leading technologies and solutions. <br> Work closely with clients, consultants, OEMs, and industry experts. <br> Take ownership and make an impact from solution design through to project delivery. <br> Build your professional profile by working on complex, high-quality technology projects. <br> <br>Strong skills in Excel, Word, Power Point, and Visio. <br> <br>Familiarity with relevant ICT, security, and ELV standards and local regulatory requirements. <br> <br>Bachelor’s degree in Electrical, Electronics, Telecommunications, Computer Engineering, or equivalent experience. <br> <br>Valid driving licence and willingness to travel to client and project sites. <br> What We're Looking For <br> <br>A technically strong and commercially aware Presales Engineer who can take ownership of the complete bid process. <br> <br>Someone who can translate complex client requirements into practical, compliant, and cost-effective solutions. <br> <br>Strong analytical and problem-solving skills with excellent attention to detail. <br> <br>Excellent technical writing, presentation, and communication skills. <br> <br>Ability to work effectively with clients, consultants, vendors, commercial teams, and project delivery teams. <br> <br>A proactive individual who can manage multiple tenders and deadlines while maintaining a high standard of quality. <br> <br>Strong understanding of both technical design and commercial considerations. <br> <br>A team player who takes ownership from initial enquiry through to successful project handover.

About Evostel:Evostel (previously AQESA), is part of the Ali Zaid Al Quraishi & Brothers Company (AZAQ Group), a closed joint stock company with a diversified investment portfolio. The Group takes pride in its Saudi roots and has been successfully operating in the GCC region for over 60 years. The Group has long-established associations and strategic relationships with several well-known international names.<br>Senior Sales Engineer – Services Job Purpose Generate new business opportunities and accelerate business growth by securing product approvals and collaborating with the Presales team to produce technical, architectural, and engineering deliverables that generate profitable sales. Serve customers by identifying their needs and engineering adaptations of products, equipment, and services to ensure high customer satisfaction. Success is measured through new customer acquisition, renewals, up-selling, cross-selling, and overall contribution to the sales team.<br>Key Responsibilities1. Sales Operations Propose cost-effective and time-saving alternatives to contractors while protecting company profit margins. Support the full sales cycle from customer engagement through project award. Collaborate with Operations teams to obtain contractor quotations in support of sales opportunities. Provide tailored technical solutions to meet unique end-user component and installation requirements. Develop sales and marketing strategies for key vertical market segments. Coordinate with internal departments to ensure timely and accurate solution delivery. Develop and deliver product and application training programs for customers. Support solution selling activities across prospective accounts. Plan, prepare, and execute strategic deals throughout complex sales cycles. Develop financial business cases for sales opportunities. Deliver compelling presentations and product demonstrations highlighting the value proposition. Manage all technical aspects of RFP/RFI responses. Collect and document competitive market intelligence.2. Quotation, Order & Collection Management Maintain the supplier database, including contact information and product mapping for efficient RFQ evaluation. Evaluate customer requirements from bid packages and RFQs in coordination with the Presales team. Identify commercial requirements (e.g., Bid Bonds) and hidden project cost factors for stakeholder review. Prepare bid packages and coordinate with customers and vendors to resolve technical queries before and after bid submission. Prepare Letters of Authorization (LOA), technical and commercial quotations, and all supporting documentation. Lead responses to technical queries during the bid evaluation process. Recommend suitable products from Evostel inventory and support pricing activities using vendor price lists and supplier portals. Coordinate with Commercial, Sales, Finance, and other internal teams to ensure bid readiness. Review customer purchase orders to verify BOM accuracy, scope of supply, payment terms, and commercial conditions. Assist in preparing and submitting final project dossiers, including user manuals, drawings, and test certificates. Support preparation of technical submittals in accordance with customer standards.3. Techno-Commercial Responsibilities Provide technical consultations covering power system retrofitting, protection system engineering, and switchgear modernization. Lead proposal development for complex electrical and automation projects. Conduct project site visits to assess customer systems and technical requirements. Drive sales through technical presentations on advanced services, including:Secondary Current Injection Testing Hipot Testing Services Protection Relay Parameter Settings Collaborate with technology partners to deliver advanced solutions such as LED lighting surveys and obsolete equipment replacement programs.4. Reporting Manage sales opportunities within the CRM and provide project tracking, win/loss analysis, revenue forecasts, and order forecasts. Monitor open orders and coordinate with vendors and Presales teams to ensure timely delivery. Track customer receivables and coordinate payment follow-up between customers and Finance. Ensure compliance with company policies and ISO procedures.5. Policies & Procedures Recommend improvements to departmental policies and support implementation of procedures and controls. Ensure compliance with Group policies and operational procedures.<br>Qualifications Education Bachelor's Degree in Engineering or equivalent. Certifications (Preferred) Customer Relationship Management (CRM). Licenses (Preferred) Saudi Council of Engineers (SCE). Experience8–10 years of relevant experience. Languages English – Fluent (Required) Arabic – Fluent (Preferred) Knowledge Product Knowledge of the Saudi Arabian Market Sales & Marketing Business Acumen

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Senior QA/QC Engineer - Industries provides operational, technical, and functional leadership across industries activities while ensuring alignment with organizational standards, business objectives, and regulatory requirements. The role is responsible for driving performance, coordination, compliance, stakeholder engagement, and service delivery within the qa/qc function. The position supports continuous improvement initiatives, cost optimization, operational efficiency, and quality outcomes while collaborating closely with internal teams, contractors, clients, and business stakeholders.</p><br><br><br><u><b>Job Responsibilities 1</b></u> <br>Operational Management: Manage day-to-day qa/qc activities within the industries environment to ensure efficient execution, compliance with procedures, and achievement of operational targets while maintaining service quality and productivity standards. Planning and Coordination: Coordinate schedules, manpower, materials, contractors, and operational activities to ensure timely completion of tasks, projects, and deliverables in line with approved timelines and business requirements. Stakeholder Engagement: Liaise with internal departments, consultants, suppliers, subcontractors, clients, and operational teams to ensure smooth communication, issue resolution, and alignment on technical and operational requirements. Compliance and Governance: Ensure compliance with company policies, contractual obligations, regulatory standards, HSE requirements, and industry best practices applicable to the industries sector. Performance Monitoring: Monitor operational KPIs, productivity, service standards, and quality benchmarks while identifying gaps, implementing corrective actions, and driving continuous improvement initiatives. Reporting and Documentation: Prepare operational reports, technical records, progress updates, cost analyses, and management presentations to support decision-making, audit readiness, and business transparency. Resource Optimization: Support efficient utilization of manpower, equipment, budgets, materials, and operational resources to improve productivity, reduce waste, and optimize operational costs. Risk and Issue Management: Identify operational risks, technical challenges, delays, and performance issues while implementing mitigation measures and escalation processes to minimize business impact. Quality Assurance: Support the implementation of quality assurance and quality control procedures to ensure services, deliverables, and operational outputs meet company and client expectations. Continuous Improvement: Contribute to process enhancements, digital initiatives, workflow optimization, and operational excellence programs to improve efficiency, service delivery, and overall business performance.<br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br>Sector Operations Knowledge: Strong understanding of operational requirements, standards, workflows, and regulatory expectations within the industries sector. Technical and Functional Expertise: Advanced knowledge of qa/qc processes, documentation, reporting standards, systems, and operational controls relevant to the role. Stakeholder Coordination: Ability to manage cross-functional communication, contractor coordination, client engagement, and team collaboration within fast-paced operational environments. Systems and Reporting: Proficiency in ERP systems, reporting tools, Microsoft Office applications, operational dashboards, and performance tracking methodologies. Problem Solving and Decision Making: Strong analytical, organizational, and decision-making capabilities with the ability to resolve operational issues and support business continuity.<br><br><u><b>Job Experience</b></u> <br>Industry Experience: Proven experience within the industries sector handling operational, technical, project, or functional responsibilities related to the role. Operational Coordination Exposure: Demonstrated experience coordinating teams, contractors, stakeholders, resources, and service delivery activities within complex operational environments. Compliance and Performance Management: Experience supporting KPI management, reporting, process improvement, quality compliance, and operational efficiency initiatives.<br><br><u><b>Competencies</b></u> <br>Leadership<br>Resilience<br>Quality<br>Agility<br>AI Fluency<br><br><br><u><b>Education</b></u> <br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Role Purpose:The Supplier Industrialization Quality Engineer is responsible for improving manufacturing efficiency, quality, and cost performance at supplier sites. This role works closely with suppliers to optimize processes, ensure capacity readiness, support new product introductions, and drive continuous improvement aligned with company standards.<br>Key Responsibilities:Evaluate new and existing supplier quality systems and process capability by applying TKEC Supplier assessment policy. Deploy supplier annual audit, product audits, VDA6.3 process audits, and ensure compliance with supplier quality manual requirements to meet quality, cost and delivery targets. Conduct manufacturing process audits, time studies, and line balancing at supplier facilities Identify bottlenecks, inefficiencies, and risks; implement corrective actions Support suppliers in achieving stable and capable processes (CP/CPK, cycle time, yield) Regularly review supplier performance and prepare supplier performance reports of supplier quality indicators such as Field Escapes PPM, Critical Parts Reliability, Problems Per Job, CAPA closure rate, etc. and take necessary actions to close gaps. Validate supplier capacity, layout, manpower, and equipment for new and existing products. Take ownership and lead cross functional team in supplier quality problems resolution process. Initiate and monitor supplier quality improvement programs. Review and approve process flow, work instructions, PFMEA, and control plans. Support ramp-up, volume increases, and localization projects. Support supplier readiness for new product Introduction and engineering changes. Participate and Execute APQP / PPAP activities/First Article Inspection requirements. Ensure industrialization milestones and deliverables as per Standard Product Development Process (SPDP) are met on time. Work closely with Supplier Quality, Purchasing, R&D, Manufacturing, and Logistics teams Provide technical guidance and training to suppliers when needed. Responsible for training and deployment of Manufacturing Process Control, Variation Reduction, Control Plan Development, Mistake Proofing, 6S, Lean Production and other TKE Company sponsored supplier initiatives. Follow all safety policies, procedures and work instructions according to the safety management system and fulfil his/her responsibilities as stated in the safety manual.<br>Qualifications & Skills:<br>Qualifications:Four-year college or university certificate: Engineering qualification preferable in Mechanical/Production/Automotive/Electrical required. At least 7 years’ experience in manufacturing or supplier engineering in manufacturing set in either Automobile/Industrial/Consumer/Electronics Manufacturing environment. (Elevator manufacturing Preferred). Familiarity with Supplier Quality Management Process. Experience working directly with suppliers for Industrialization and Quality Improvement. Project Management experience will be added advantage. Proficiency is common office Software tools (Excel, PPT, Outlook, etc.) Has Worked in SAP or any other related ERP systems.<br>Skills:Lean Manufacturing, Six Sigma, or similar methodology experience Knowledge of APQP, PPAP, PFMEA, and control plans Ability to perform time studies, line balancing, and capacity analysis Strong analytical, problem-solving, and communication skills. Knowledge of 8D and similar Quality Tools. Understands various manufacturing processes involved in production. Experience and ability to visualize customer complaints and their relation to various TKE operating processes. Quality Systems Certification (ISO9001 internal auditor), Lean Manufacturing, Manufacturing Process Control, Six Sigma, Geometric Dimensioning and Tolerancing.<br>Additional Requirements:Willingness to travel to supplier sites as required, at least 15 days in a month. Ability to work alone as the TKE voice and representative for Factory and the quality department.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Manage FM projects, site engineering, fit-out, renovation, finishing works, and infrastructure improvements across Wa'ad Al Shamal and Jalamid, delivering safely within approved scope, quality, timeline, and budget.</p><br><p><strong>KEY RESPONSIBILITIES</strong></p><ul><li><p>Manage site engineering for renovation, fit-out, finishing, civil improvements, and facility upgrades.</p></li><li><p>Review scope, drawings, BOQs, specifications, method statements, schedules, and contractor submissions.</p></li><li><p>Supervise site execution against approved scope, quality standards, and Maaden safety requirements.</p></li><li><p>Coordinate with end users, FM, EHSS, Engineering, Procurement, Operations, and contractors.</p></li><li><p>Monitor progress, quality, risks, materials, manpower, and contractor productivity.</p></li><li><p>Conduct inspections, prepare snag lists, close corrective actions, and ensure proper handover.</p></li><li><p>Ensure permits, access approvals, isolations, and lifting plans are secured before execution.</p></li><li><p>Prepare progress reports, dashboards, cost updates, risk logs, and completion reports.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor degree in Civil, Architectural, Mechanical, Electrical Engineering, or Construction Management.</p></li><li><p>7–10 years in project or site engineering, renovation, fit-out, finishing, or construction supervision.</p></li><li><p>Experience in industrial, mining, large residential, or multi-site FM environments preferred.</p></li><li><p>Strong knowledge of civil works, finishing, MEP coordination, BOQ review, QC, and project handover.</p></li><li><p>Good understanding of Saudi Building Code, HSE, permit-to-work, and site execution controls.</p></li><li><p>Familiarity with MS Project, Primavera, AutoCAD, CAFM, or CMMS is preferred.</p></li><li><p>Ability to work with Arabic- and English-speaking stakeholders; English proficiency (IELTS 5.0 or equivalent).</p></li></ul><br><p><strong>REPORTING AND DELIVERABLES</strong> Weekly operational updates with risks and action plans; monthly KPI and contractor performance scorecards; inspection records and corrective action trackers; improvement initiatives log; and clear escalation of items affecting safety, cost, service continuity, or end-user satisfaction. </p><p></p></section>

<p>Turner &amp; Townsend is looking to recruit an experienced Senior Cost Manager, to join our talented Infrastructure team based in Riyadh, working on one of our major aviation programs.</p><p>SCOPE: The Senior Cost Manager will support our commission leads in the contracts team in a pre-contract setting.</p><p>MAIN PURPOSE OF ROLE: Support Commission Managers reviewing contracts in the pre-contract setting, and drafting contracts. Evaluating commercial aspects of the contract for tender submission. Negotiating contractual matters with clients, consultants, contractors and suppliers. Assist in the drafting, reviewing and amendment of contracts and associated documentation. Ensure that client objectives are met through the delivery of an effective pre-contract contract management service.</p><p><strong>Desired Candidate Profile</strong></p><p>Proven experience reviewing contracts within a pre-contract environment. Experience evaluating the commercial and contractual components of tender submissions. Experience working with standard forms of contract, with FIDIC experience preferred. Contract drafting experience would be advantageous.</p><p>Qualifications Bachelor's degree in Law, Quantity Surveying, Commercial Management, Construction Management, Engineering, or a related discipline. Minimum 5-10 years experience in similar roles. Demonstrated experience in pre-contract contract review and negotiation. Experience within construction, infrastructure, engineering, project management, or consultancy environments preferred. Professional certifications such as MRICS, MCIArb, are advantageous. FIDIC training or certification is considered a strong advantage</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Master Works is looking for an Agentic AI, Engineer to join our growing team and design, build, and deploy agentic AI systems that can plan, reason, and act.<br> The role covers both single-agent and multi-agent systems, as well as orchestration of workflows involving retrieval-augmented generation (RAG), context engineering, reasoning, tool calling, memory, and inter-agent communication.<br> This role is ideal for a strong software engineer with hands-on AI/ML development experience and a passion for transforming generative AI models into reliable, goal-driven systems capable of solving complex, real-world business problems.<br> Key Responsibilities: Architect, build, and deploy agentic AI systems that integrate AI agents with foundation models, enterprise systems, third-party tools, and APIs using established agentic frameworks or custom-built orchestrators.<br> Build and maintain retrieval-augmented generation (RAG), memory, and reasoning pipelines that ground agent decisions in reliable, real-world data and enable persistent, contextual, and adaptive behavior.<br> Design single-agent and multi-agent workflows, including planning, delegation, tool selection, handoffs, inter-agent communication, and human-in-the-loop controls.<br> Optimize orchestration and reasoning performance while balancing autonomy, latency, cost, interpretability, reliability, and maintainability.<br> Collaborate with Generative AI engineers, application engineers, MLOps engineers, and product teams to move agentic AI solutions from prototype to production.<br> Monitor, evaluate, and benchmark agent performance, and help ensure AI systems are safe, accurate, trustworthy, observable, and capable of delivering a high-quality user experience.<br> Document agent architectures, communication flows, guardrails, context-engineering strategies, memory design, tool interfaces, and orchestration logic to ensure clarity and reproducibility.<br> Stay current with advances in agentic AI, multi-agent orchestration, RAG, model-context protocols, cognitive architectures, evaluation methods, and AI safety mechanisms.<br> Collaborate with cross-functional teams to design and deliver complete AI solutions for customers.<br> Bachelor’s or Master’s degree in Computer Science, Artificial Intelligence, Machine Learning, Data Science, Software Engineering, or a related field.<br> 2+ years of hands-on experience developing agentic AI systems, LLM-powered applications, or advanced Generative AI solutions.<br> Preferably 5+ years of overall professional software engineering experience Contributions to open-source agentic AI frameworks, orchestration platforms, evaluation tooling, or agent communication protocols.<br> Experience building microservices and deploying AI applications on cloud platforms such as AWS, Azure, or Google Cloud Platform (GCP).<br> Experience with AI safety, guardrails, observability, traceability, evaluation, and explainability for agentic AI systems.<br> Experience deploying LLM or agentic workloads in production using containers, Kubernetes, CI/CD pipelines, and modern MLOps or LLMOps practices.<br> Job Location: HQ</span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h3 >About SYSTRA Arabia</h3> <p >SYSTRA Arabia is seeking a <strong >Track Design Engineer</strong> to provide Project Management Consultancy (PMC) services for a significant client in Saudi Arabia. This role is integral to supporting major rail projects within the region.</p> <h3 >The Role of Track Design Engineer</h3> <p >The Track Design Engineer will focus on leading and assuring track alignment design for various rail projects. This involves aligning multidisciplinary interfaces and ensuring project delivery adheres to client standards and specifications.</p> <h3 >Key Responsibilities</h3> <ul > <li >Support the Engineering Lead in reviewing horizontal and vertical alignment design for mainline, depot, and yard tracks using industry-standard tools such as Bentley OpenRail, Civil 3D, and MX.</li> <li >Define and enforce geometric design criteria, alignment control parameters, and tolerances across all project phases, including concept, preliminary, and detailed design.</li> <li >Conduct design checks, optioneering, and value engineering for alignments, turnouts, crossovers, and transition curves to optimize performance, maintainability, and cost efficiency.</li> <li >Ensure compliance with international and regional rail standards and client-specific requirements, integrating RAMS, maintainability, and ride quality considerations into designs.</li> <li >Act as the integrated PMC representative to the client, coordinating multi-disciplinary interfaces across civil, structures, trackwork, OCS, signaling, drainage, and utilities.</li> <li >Manage technical queries, change requests, and design approvals, maintaining clear audit trails and configuration control throughout the project lifecycle.</li> <li >Lead design risk management for alignment choices, considering factors such as ground conditions, utilities, third-party constraints, and environmental impacts.</li> <li >Oversee contractor and designer performance on alignment deliverables, ensuring adherence to baseline schedules and quality standards.</li> <li >Maintain design schedules, registers, and progress reporting for all alignment-related works.</li> <li >Prepare and present technical reports, design review comments, and decision logs to client stakeholders.</li> <li >Ensure constructability and staging are embedded in alignment design, providing support to site teams during construction and responding to Requests for Information (RFIs).</li> <li >Implement robust quality assurance processes, including independent design reviews and verification/validation activities.</li> <li >Align deliverables with Kingdom of Saudi Arabia (KSA) authority requirements and applicable standards, supporting permitting and approvals processes.</li> <li >Engage with stakeholders, authorities, and third parties to resolve constraints, protect corridors, and secure necessary approvals.</li> </ul> <h3 >Required Experience and Skills</h3> <p >Candidates for this position should possess a solid design background in track engineering.</p> <ul > <li >A minimum of <strong >5 to 10 years of experience</strong> in track design.</li> <li >Proficiency in industry-standard design tools such as Bentley OpenRail, Civil 3D, or MX.</li> <li >Demonstrated ability to define and enforce geometric design criteria and alignment control parameters.</li> <li >Strong understanding of international and regional rail standards, including KSA authority requirements.</li> <li >Experience in coordinating multi-disciplinary interfaces and managing design risks.</li> <li >Ability to prepare technical reports and present findings to stakeholders.</li> </ul> <h3 >Location and Work Type</h3> <p >This is a <strong >full-time</strong> position based in <strong >Dammam, Eastern, Saudi Arabia</strong>.</p> <h3 >Application Process</h3> <p >Interested candidates are invited to submit their application for consideration.</p>

<h3 >The Design Engineer Role at Emerson</h3> <p >Emerson Al-Arabia for Manufacturing is seeking a <strong >Design Engineer</strong> to join its Isolation Valves business unit in Dammam, Eastern, Saudi Arabia. This full-time position is suitable for candidates with 0-1 years of experience and is central to providing engineering support for project and sales orders across valve and actuation product lines.</p> <h3 >Role Context and Scope</h3> <p >The Design Engineer holds end-to-end ownership of order engineering activities, ensuring solutions consistently meet customer, quality, and industry requirements. The role involves close collaboration with global engineering, manufacturing, sales, and operations teams, requiring a commitment to moving projects forward with urgency and accountability. Effective communication and the ability to build strong working relationships across diverse cultures and functions are essential.</p> <h3 >Key Responsibilities</h3> <ul > <li >Provide engineering support for customer orders, including the design, modification, and documentation of valve and actuation solutions.</li> <li >Develop and maintain engineering deliverables such as 3D models, integrated drawings, bills of materials, and technical documents using a 3D CAD environment.</li> <li >Interpret customer specifications, datasheets, and applicable international codes and standards to ensure compliant and optimized designs.</li> <li >Define automation and actuation philosophies for various valve applications, aligned with customer and project requirements.</li> <li >Support technical queries from sales, quotation, and order management teams throughout the project lifecycle.</li> <li >Collaborate with manufacturing, supply chain, and service teams to support production, procurement, and field activities.</li> <li >Prepare customer drawings, wiring diagrams, schematics, and manufacturing documentation for internal use and customer submission.</li> <li >Review and approve internal and supplier drawings, recommending improvements to enhance quality, efficiency, and cost-effectiveness.</li> <li >Maintain accurate engineering documentation, including revisions, change notices, and order updates, in line with quality systems.</li> <li >Contribute to continuous improvement by learning new products, applications, and engineering practices.</li> <li >Adhere to Health, Safety &amp; Environment policies as laid by the organization.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >A degree or equivalent qualification in Mechanical or Instrumentation Engineering.</li> <li >Experience (0-1 years) in product or order engineering within the valve, actuation, or industrial automation domain.</li> <li >Working knowledge of pneumatic and hydraulic applications.</li> <li >Experience using 3D CAD tools for engineering design and documentation.</li> <li >Understanding of engineering drawings, geometric tolerancing, and process documentation.</li> <li >Ability to communicate effectively in English in a professional engineering environment.</li> </ul> <h3 >Preferred Skills and Attributes</h3> <ul > <li >Product knowledge related to butterfly valves, ball valves, and actuator systems.</li> <li >Familiarity with international valve standards and manufacturing processes.</li> <li >Experience working with ERP systems and structured engineering workflows.</li> <li >Exposure to multi-regional or global engineering collaboration.</li> </ul> <h3 >Professional Development and Workplace Standards</h3> <p >The successful candidate will be committed to continuous learning, actively seeking feedback to improve, and developing both technical and professional capabilities. Adherence to all Health, Safety &amp; Environment policies is a fundamental requirement of this role within the organization.</p>

<p>We are looking for an experienced Principal Mechanical Engineer to join our team. The ideal candidate will have hands-on experience in the design and implementation of mechanical systems for a variety of entertainment projects. This role involves designing mechanical systems such as HVAC systems and other building-specific mechanical systems, ensuring they meet all performance, efficiency, and regulatory standards.</p><p>Your role</p><ul><li>Design mechanical systems for buildings, including HVAC (heating, ventilation, and air conditioning), and other mechanical essential systems.</li><li>Produce detailed design documentation, including drawings, calculations, and specifications to meet client requirements and applicable building codes and standards.</li><li>Perform system sizing, load calculations, and energy modelling to optimize the performance, efficiency, and cost-effectiveness of mechanical systems.</li><li>Collaborate closely with other disciplines (architects, electrical engineers, structural engineers) to ensure that mechanical systems are integrated into the overall building design seamlessly.</li><li>Conduct site visits to assess building conditions, verify measurements, and ensure designs are feasible based on existing or proposed conditions.</li><li>Liaise with clients, contractors, and subcontractors to clarify design requirements, provide technical support, and ensure the smooth progression of the project.</li><li>Ensure that all mechanical designs and systems adhere to local building codes, industry standards, and safety regulations.</li><li>Stay up-to-date with the latest design software, industry practices, and regulatory changes to ensure the best possible solutions.</li><li>Perform design reviews and quality checks to ensure the accuracy and quality of deliverables.</li><li>Integrate energy-efficient systems and sustainable technologies, such as renewable energy systems, into designs to meet environmental and energy goals.</li><li>Assist in achieving building certifications (e.g., LEED, BREEAM) by designing energy-efficient and environmentally responsible systems.</li><li>Provide technical support to construction teams during installation and commissioning of mechanical systems.</li><li>Address any design issues that arise during the construction phase and suggest solutions to ensure the systems are installed according to specifications.</li><li>Conduct site inspections and performance testing to ensure systems operate as designed.</li><li>Maintain comprehensive documentation of designs, system specifications, and calculations.</li><li>Prepare and present reports for clients, stakeholders, and regulatory authorities.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in Mechanical Engineering or a related field. Minimum 12 years of experience as a Mechanical Design Engineer, with a focus on building services or HVAC design. Proficiency in mechanical design software such as AutoCAD, Revit, Hap and other relevant engineering tools. Solid understanding of mechanical building systems (HVAC, plumbing, fire protection) and their integration into overall building designs. Strong knowledge of local building codes, standards (ASHRAE, CIBSE), and regulations related to mechanical systems. Experience working on entertainment projects is required. Familiarity with sustainable building design practices, energy efficiency measures, and green building certifications (LEED, BREEAM) is a plus. Experience with BIM (Building Information Modeling) for mechanical system design. Knowledge of energy modeling and simulation tools. Familiarity with commissioning and testing procedures for mechanical systems. Ability to manage multiple projects simultaneously and effectively meet deadlines. Strong analytical and problem-solving skills, with attention to detail. Excellent communication skills, both written and verbal.</p>

<p>We are seeking a highly skilled DevOps/MLOps Engineer to bridge the gap between data science research and AI engineering to ensure smooth SDLC delivery. You will be responsible for designing, implementing, and maintaining the infrastructure and automated pipelines that allow our teams to build, deploy, and monitor modern AI platforms and RAG pipelines at scale. This role requires a deep understanding of cloud infrastructure, CI/CD practices, and the unique challenges associated with the machine learning lifecycle.</p><p><b><br></b></p><p><b>Key Responsibilities</b></p><ul><li>Infrastructure and Automation</li><li>Design and manage scalable cloud infrastructure on Google Cloud Platform (GCP) using Terraform, with a focus on GKE clusters, firewalls, and network policies.</li><li>Develop and maintain full SDLC CI/CD pipelines using GitHub Actions, integrating Renovate for dependency management, Sonar for code quality, and Artifactory for binary management.</li><li>Optimize system performance and implement cost-saving measures across cloud environments.</li><li>Build and automate end-to-end ML pipelines on Vertex AI, specializing in RAG architectures and automated data ingestion into Qdrant databases.</li><li>Implement and manage evaluation pipelines to measure and improve the performance of LLM-based systems and agentic workflows.</li><li>Establish automated deployment strategies for ML models (e.g., A/B testing, Canary deployments).</li><li>Monitoring and Reliability</li><li>Develop comprehensive monitoring and alerting systems to ensure the health of production models and infrastructure.</li><li>Implement data and model drift detection to maintain the accuracy of deployed models over time.</li><li>Collaborate with security teams to ensure compliance and data privacy throughout the ML lifecycle.</li><li>Integrate and maintain observability tools such as Langfuse, OpenTelemetry, and Prometheus to enhance system transparency and debugging for ML pipelines and LLM applications.</li><li>Utilize distributed tracing and logging to identify bottlenecks and optimize performance across microservices and agentic workflows.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Experience:</p><ul><li>3+ years in DevOps, SRE, or MLOps roles.</li><li>Cloud Platforms: Proficiency in Google Cloud Platform (GCP).</li><li>Containerization: Advanced knowledge of Docker and Kubernetes (GKE).</li><li>Automation: Expertise in Python, GitHub Actions, Renovate, Sonar, Artifactory, Argo CD, and Helm charts.</li><li>Data Tools: Experience with SQL, NoSQL databases, and data orchestration (Airflow).</li></ul><p>Preferred Skills</p><ul><li>Experience with Vertex AI, RAG pipelines, Qdrant, and LLM orchestration (LangChain or LlamaIndex).</li><li>Contributions to open-source DevOps or MLOps projects.</li><li>Relevant certifications (e.g., AWS Certified DevOps Engineer, CKA).</li></ul>

<p>We are seeking a highly skilled DevOps/MLOps Engineer to bridge the gap between data science research and AI engineering to ensure smooth SDLC delivery. You will be responsible for designing, implementing, and maintaining the infrastructure and automated pipelines that allow our teams to build, deploy, and monitor modern AI platforms and RAG pipelines at scale. This role requires a deep understanding of cloud infrastructure, CI/CD practices, and the unique challenges associated with the machine learning lifecycle.</p><p>Key Responsibilities</p><ul><li>Infrastructure and Automation</li><li>Design and manage scalable cloud infrastructure on Google Cloud Platform (GCP) using Terraform, with a focus on GKE clusters, firewalls, and network policies.</li><li>Develop and maintain full SDLC CI/CD pipelines using GitHub Actions, integrating Renovate for dependency management, Sonar for code quality, and Artifactory for binary management.</li><li>Optimize system performance and implement cost-saving measures across cloud environments.</li><li>Build and automate end-to-end ML pipelines on Vertex AI, specializing in RAG architectures and automated data ingestion into Qdrant databases.</li><li>Implement and manage evaluation pipelines to measure and improve the performance of LLM-based systems and agentic workflows.</li><li>Establish automated deployment strategies for ML models (e.g., A/B testing, Canary deployments).</li><li>Monitoring and Reliability</li><li>Develop comprehensive monitoring and alerting systems to ensure the health of production models and infrastructure.</li><li>Implement data and model drift detection to maintain the accuracy of deployed models over time.</li><li>Collaborate with security teams to ensure compliance and data privacy throughout the ML lifecycle.</li><li>Integrate and maintain observability tools such as Langfuse, OpenTelemetry, and Prometheus to enhance system transparency and debugging for ML pipelines and LLM applications.</li><li>Utilize distributed tracing and logging to identify bottlenecks and optimize performance across microservices and agentic workflows.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Experience: 3+ years in DevOps, SRE, or MLOps roles.</li><li>Cloud Platforms: Proficiency in Google Cloud Platform (GCP).</li><li>Containerization: Advanced knowledge of Docker and Kubernetes (GKE).</li><li>Automation: Expertise in Python, GitHub Actions, Renovate, Sonar, Artifactory, Argo CD, and Helm charts.</li><li>Data Tools: Experience with SQL, NoSQL databases, and data orchestration (Airflow).</li><li>Preferred Skills: Experience with Vertex AI, RAG pipelines, Qdrant, and LLM orchestration (LangChain or LlamaIndex). Contributions to open-source DevOps or MLOps projects. Relevant certifications (e.g., AWS Certified DevOps Engineer, CKA).</li></ul>

<p>We are looking for a highly talented Software Engineer II - Backend t o join our growing team in Riyadh. If you are looking for a place where you can gain hands-on experience and create a direct impact, then this may be the place for you! The ideal candidate will collaborate with the Product Team in order to understand product requirements and provide technical expertise for all products as required, and to assist in analyzing, designing, testing, and structuring the required solutions to deliver a high-quality working software based on the business needs and standards.</p><p>You Will Be Working On</p><ul><li>Software Development</li><li>Keep abreast of latest software development methodologies in order to be able to provide best-in-class software solutions</li><li>Analyze product requirements in order to understand engineering requirements, estimate efforts and provide the required solutions in collaboration with Product Team</li><li>Assist in building development components in order to transform the requirements into actual working software accurately</li><li>Document all coding steps in order to ensure comprehensibility and to facilitate future modifications and maintenance</li><li>Investigate and resolve issues and bugs</li><li>Collaborate with other colleagues in order to assist each other in code reviews and deliver code review reports accordingly</li><li>Perform functional and module testing in order to ensure functionality of delivered solutions</li><li>Assist in user trials and acceptance testing</li><li>Governance and Resilience</li><li>Follow all relevant policies, procedures, and processes in order for the daily work to be carried out in a controlled and consistent manner</li><li>Contribute to the identification of opportunities for continuous improvement of processes, practices, work processes, cost effectiveness, and productivity enhancement</li><li>Promote to other employees within the organization the implementation and adherence to policies, procedures, processes, and instructions</li><li>Daily Operations</li><li>Follow daily operations relating to the job to ensure work continuity</li><li>Contribute to preparing timely and accurate reports that concern the line of work to meet the requirements, objectives, and standards</li><li>Ensure the satisfaction of both internal and external customers by addressing their needs in a courteous and timely manner</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>4-5 years of experience in backend development using GoLang, Ruby on Rails (RoR), Java, or Python</li><li>Bachelor Degree in a relevant field is required</li><li>Master s degree in a relevant field is preferred</li><li>Knowledge &amp; understanding of software architecture, including Domain-Driven Design (DDD), microservices, Kubernetes, and containerization</li></ul>

Company: AlRawaf Contracting Group. Job Title: Senior Planning Engineer / Planning Team Lead Industry: Construction. Location: Project / Office Based – As Assigned Employment Type: Full-time. Seniority Level: Senior Level.<br>About AlRawaf Contracting Group:AlRawaf Contracting Group, a subsidiary of Sakef Holding, is a leading company in general contracting, construction, infrastructure, urban development, and integrated energy and utility solutions in Saudi Arabia. Established in 1996, the company has built a solid foundation of expert talent, accumulated experience, and a clear, ambitious vision. Known for delivering large-scale, high-quality projects across the Kingdom, AlRawaf is committed to maintaining the highest standards of quality, safety, and innovation. As part of our ambitious growth strategy, we are looking to attract skilled professionals who share our passion for performance, development, and excellence. Join us and be part of a company shaping the future of construction in Saudi Arabia.<br>Position Overview:We are seeking a highly experienced and proactive Senior Planning Engineer / Planning Team Lead to lead and oversee the project planning and scheduling activities throughout the project lifecycle, from tendering and pre-construction to execution and closeout. Responsible for developing detailed project schedules, monitoring progress, analyzing delays, and providing management with accurate scheduling information and performance analysis.<br>Key Responsibilities:Develop detailed project schedules (Create Work Breakdown Structures (WBS), define project activities, Durations, logic sequence, and milestones). Develop manpower, equipment, and material loading plans. Coordinate with cost control teams for integrated planning. Prepare integrated engineering, procurement, and construction schedules. Prepare baseline schedules for management, consultant and client approval. Identify schedule risks and opportunities. Monitor project progress against approved schedules and update schedules regularly (weekly/monthly). Measure productivity and performance trends. Prepare weekly and monthly progress reports, generate S-curves, histograms, and earned value reports. Monitor manpower, equipment, and material utilization. Assist in cash flow forecasting and budget monitoring. Monitor critical paths, identify schedule risks, analyze delays and recommend corrective actions. Report schedule variances and recovery plans. Conduct delay analysis using recognized methodologies. Prepare extension of time (EOT) claims and supporting documentation. Lead and mentor planning engineers and schedulers. Review and approve planning deliverables. Coordinate planning activities across multiple projects.<br>Qualifications & Experience Bachelor’s degree in engineering, preferably Civil, Architecture, or a related discipline.+7–12 years of relevant experience in project planning, scheduling, and project controls. Strong experience in Construction, EPC, Infrastructure, Oil & Gas, or other large-scale projects. Advanced hands-on experience with Primavera P6. Strong knowledge of project planning, scheduling, progress measurement, project controls, and performance management. Good understanding of project execution methodologies and the complete project lifecycle. Previous experience in coordinating or leading a planning team is highly preferred. Strong knowledge of Excel and project reporting tools. Experience with Power BI or other project dashboards is an advantage. PMP, PMI-SP, AACE, or other relevant certification is an advantage.<br>Why Join AlRawaf Contracting Group? Be part of a reputable and growing construction leader in Saudi Arabia. Contribute to impactful projects that shape the future of infrastructure. Gain exposure to complex and large-scale recruitment projects. Enjoy a supportive, professional, and performance-driven work environment. Competitive salary and benefits package. Opportunities for continuous learning and career growth.

We are seeking a Project Engineer to join our team in Dammam – Saudi, to support the successful execution of oil and gas surface infrastructure projects. The ideal candidate will have hands-on experience in reading and interpreting Piping and Instrumentation Diagrams (P&IDs), working with surface production equipment and managing fabrication and installation processes. This role requires strong interaction with clients, engineering teams, quality groups, wellsite employees and vendors to ensure projects meet technical specifications, quality standards and operational requirements.<br>Essential Duties and Responsibilities: Lead and support projects involving the development, fabrication and installation of surface infrastructure for oil and gas applications. Read, interpret and analyze P&IDs, engineering drawings and specifications to ensure proper equipment selection and system integration. Conduct wellsite surveys prior to project execution, assessing site conditions, verifying infrastructure readiness, identifying potential challenges and coordinating with clients, vendors and field personnel to ensure seamless installation and operation of equipment. Work closely with vendors, fabricators and installation teams to ensure compliance with project requirements, industry standards and safety regulations. Collaborate with multidisciplinary teams, including design engineers, procurement specialists and field service teams to streamline project workflows. Ensure all equipment and systems adhere to local regulations, international standards (API, ASME, ISO) and ARAMCO requirements where applicable. Identify potential project risks and develop mitigation strategies to prevent delays or budget overruns. Maintain detailed records of project progress, prepare technical reports and provide regular updates to management, internal and external stakeholders. Interact with customer to ensure safe and efficient field operations. Provide guidance and needed information for the internal engineering team to design required interface equipment when the equipment is not available off-the-shelf. Ensure that third-parties have specified the correct equipment to meet the requirements of safe and efficient operations. Prepare associated cost estimates and control costs for the company throughout the project. Participate in risk assessments before each field operation. Assure adequate third-party Quality Assurance and Quality Control of any equipment for the project. Typically operates as a one-person crew, supervising third-party service company personnel. Record all non-conformances and non-production time and report these to management, internal and external stakeholders. Ensure that all work within the area of responsibility is adequately documented and lessons learned are captured for the benefit of future operations. Provide technical feedback to internal engineering team to improve the safety and performance of the technology. Ensure that all activities comply with company standards and governmental regulations. Collaborate with other members of a multi-disciplinary engineering team to deliver each project efficiently.<br>Skills, Experience, Education, and Abilities:BS/MS in Engineering required. Minimum of five years of experience in onshore/offshore completion, production or workover operations. Strong ability to read and interpret P&IDs, isometric drawings and engineering documentation. Experience with the design, selection and integration of surface production equipment. Familiarity with fabrication and installation processes, including welding, material selection and testing procedures. Experience in interacting with customers and third-party vendors. PMP or relevant industry certifications. At least two years of project management or coordination experience. Ability to work with a multi-disciplinary team environment. System integration experience with intelligent completion systems is a plus. Strong written, oral and interpersonal communication skills. Must have highly perceptive listening skills and be open to ideas of others. Extensive knowledge of Well Interventions (slickline, e-line, pumping and coiled tubing), Completions, DST/TCP, Surface Testing and operations is a plus. Experience in ESP and other completion equipment design is a plus but not required. IADC Well Sharp or IWCF Well Intervention Pressure Control Certificate a plus. Experience in conducting well on paper, intervention campaigns and/or System Integration Testing (SIT) is a plus.<br>Intangibles Sought: Able to take initiative, work with minimal supervision, and stay committed to delivering high-quality results. Thrives in dynamic environments, adapting to shifting project demands with resilience. Communicates complex technical concepts clearly across diverse teams and stakeholders. Works collaboratively, fostering positive relationships with clients, vendors and internal teams.<br>Physical Demands / Work Environment: The Project Engineer role requires a combination of office-based work and field visits to fabrication yards, vendor facilities and oilfield wellsites. The position involves extended periods of sitting, standing and walking, as well as the ability to lift up to 25 kg. (55 lbs.) and work in elevated areas or confined spaces. The engineer must be physically capable of wearing required PPE, including hard hats, safety glasses, gloves and steel-toe boots. Fieldwork may expose the individual to varying temperatures, humidity, loud noise, dust, fumes and high-pressure equipment, necessitating strict adherence to safety protocols. Travel to client sites, vendor locations or offshore facilities may be required based on project needs.

<p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p>Parsons is looking for an amazingly talented Resident Construction Engineer Architect to join our team! In this role you will be r es ponsible for managing both administrative and site-based construction monitoring activities, while providing technical oversight to ensure the project is delivered in accordance with the approved design, budget, schedule, quality standards, safety requirements, and contractual obligations.</p><h2>What You'll Be Doing:</h2><ul><li>Monitor multiple contracts and the associated architectural field activities of construction contractors to ensure compliance with contractual requirements, including scope of work, procedures, cost, schedule, installation, and quality.</li><li>Oversee architectural elements such as:<ul><li>Building facades and envelope systems</li><li>Interior finishes and fit-outs</li><li>Architectural detailing and aesthetics</li><li>Accessibility and code compliance</li><li>Coordination of architectural elements with structural, MEP, and landscape systems</li></ul></li><li>Implement and adhere to the QA/QC Program, safety regulations, and specifications during work activities.</li><li>Provide guidance to contractors regarding schedule, procedures, scope of work, and other information requirements.</li><li>Plan, organize, monitor, and follow up on contractors activities.</li><li>Supervise the contractor s work to ensure that site operations are effectively executed, and that all required inspections are properly conducted and documented.</li><li>Develop a close working relationship with contractors.</li><li>Provide technical guidance in interpretation of contract documents and specifications.</li><li>Review job plans, methods, materials, and detect potential issues in meeting schedules or specifications.</li><li>Review method statements, architectural material submittents, shop drawings, and as-built drawings submitted by contractors for compliance with contract requirements.</li><li>Obtain engineering review and approval.</li><li>Identify and report discrepancies in original design or contract documents requiring modifications.</li><li>Coordinate with other departments and third parties to obtain required support and/or approvals.</li><li>Resolve conflicts in schedules and coordinate interfaces between architectural and other disciplines.</li><li>Recommend approval of schedule changes in construction activities where required.</li><li>Compile technical data to prepare weekly and monthly reports on project progress, cost, and quality control.</li><li>Conduct or direct investigations and advise SRCE and SRCM of issues affecting schedule or quality.</li><li>Assist SRCE and SRCM in administrative functions and initiate correspondence (draft letters/reports) to contractors and other departments for SRCM s signature.</li><li>Review and validate billing items submitted in Work Estimates, confirm actual progress, determine work completion percentages, and recommend payments accordingly.</li><li>Assist in compiling documentation and evaluating claims or delays related to architectural works.</li><li>Perform other related duties as assigned by management.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s Degree in Architecture from a recognized institution.</li><li>Minimum of 5 years post-graduation experience with strong site inspection and construction management skills in architectural works.</li><li>Solid understanding of architectural design principles, building materials, and construction detailing.</li><li>Knowledge of international building codes (IBC, UBC), ADA standards, and local regulatory requirements.</li><li>Desired project experience includes residential, commercial, institutional, and mixed-use developments, as well as public realm and infrastructure projects.</li><li>Fluent in spoken and written English; ability to produce clear technical documentation and reports.</li><li>Must be able to obtain a Saudi Driving License.</li><li>At least 3 years of Middle East work experience is desirable.</li></ul>

<h3 >About the Role</h3> <p >Hexaware Technologies Limited is seeking a <strong >DC Engineer Specialist</strong> for a full-time position. This role involves provisioning and configuring Oracle Cloud Infrastructure (OCI) resources, ensuring adherence to approved designs and established landing-zone patterns. The specialist will work with various OCI services, including Compute, Block/Object/FSS Storage, VCN, Load Balancer, DBCS, and ADB.</p> <h3 >Key Responsibilities</h3> <ul > <li >Configure networking components such as VCN, subnets, route tables, security lists/NSGs, gateways, FastConnect/IPSec VPN, and DNS, applying standard tagging, naming, and cost-allocation conventions.</li> <li >Support deployments and releases across various environments utilizing CI/CD pipelines, including OCI DevOps, Jenkins, GitHub Actions, GitLab CI, and Azure DevOps.</li> <li >Author and maintain Infrastructure-as-Code modules (Terraform / OCI Resource Manager) and automation scripts (Ansible, Bash, Python) for recurring tasks like patching, certificate rotation, snapshots, and environment refresh.</li> <li >Monitor platform health and respond to alerts and incidents within defined SLAs using OCI Monitoring, OCI Logging, APM, and enterprise tools such as Prometheus, Grafana, ELK, Datadog, and Dynatrace.</li> <li >Execute routine operations including patching, backups, capacity checks, certificate renewals, and drift remediation, and participate in on-call rotations and change windows.</li> <li >Apply security controls such as IAM policies, MFA, OCI Vault/KMS, encryption, segmentation, and Bastion, and validate guardrails using Cloud Guard, Security Zones, Vulnerability Scanning, and Data Safe.</li> <li >Manage access, including user lifecycle, role assignment, service accounts, and periodic reviews, and support audit and compliance evidence gathering.</li> <li >Assist with workload migration (lift-and-shift, re-platform) to OCI, environment setup, and hypercare, and support application teams deploying onto OCI (Oracle DB, WebLogic, OKE, Functions, API Gateway).</li> <li >Contribute to cost optimization efforts through right-sizing, scheduling, and unused-resource cleanup, and maintain runbooks, configuration records, and operational documentation.</li> </ul> <h3 >Experience and Qualifications</h3> <p >Candidates for this role should possess <strong >0-1 years of relevant experience</strong>. The position requires a foundational understanding of cloud infrastructure principles and a demonstrated ability to work with OCI services and related technologies.</p> <h3 >Technical Skills</h3> <ul > <li >Proficiency in OCI resource provisioning and configuration.</li> <li >Experience with networking concepts (VCN, subnets, route tables, security lists/NSGs, gateways, FastConnect/IPSec VPN, DNS).</li> <li >Familiarity with CI/CD pipelines (OCI DevOps, Jenkins, GitHub Actions, GitLab CI, Azure DevOps).</li> <li >Ability to author Infrastructure-as-Code modules (Terraform / OCI Resource Manager) and automation scripts (Ansible, Bash, Python).</li> <li >Knowledge of monitoring tools such as OCI Monitoring, OCI Logging, APM, Prometheus, Grafana, ELK, Datadog, and Dynatrace.</li> <li >Understanding of security controls including IAM policies, MFA, OCI Vault/KMS, encryption, segmentation, Bastion, Cloud Guard, Security Zones, Vulnerability Scanning, and Data Safe.</li> </ul> <h3 >Work Type</h3> <p >This is a <strong >full-time</strong> position.</p> <h3 >Application Process</h3> <p >Interested candidates are encouraged to apply for this role at Hexaware Technologies Limited.</p>

<p><h4>Exceptional hospitality starts with you</h4> <p>Picture yourself brightening someone’s day. When you join our hotels team, that’s exactly what you’ll do every time you come to work! As an assistant chief engineer, you’re not just overseeing physical building and systems maintenance and repairs – you’re spreading the light and warmth of hospitality by delivering memorable experiences that make the stay for every guest.</p> <h4>Here's what you'll do during a typical day:</h4> <ul> <li><strong>Lead and develop a high-performing team:</strong> Recruit, train, supervise, and mentor team members; conduct performance evaluations, provide professional development opportunities, and recognise achievements to build a motivated and high-performing team.</li> <li><strong>Assist chief engineer with managing daily maintenance operations:</strong> Oversee maintenance activities, prioritize tasks, and verify completion through the property maintenance management system; ensure timely resolution of service requests, guest concerns, and emergencies.</li> <li><strong>Ensure safety and compliance:</strong> Oversee the maintenance of the physical building, mechanical systems, electrical systems, HVAC, and life safety systems, coordinate inspections, and uphold safety and compliance standards in line with national and local regulations.</li> <li><strong>Assist chief engineer with driving engineering performance:</strong> Monitor departmental key performance indicators (KPIs), including equipment upkeep, audit results, and team productivity and act as needed to improve performance.</li> <li><strong>Support hotel-wide operational leadership:</strong> Collaborate with the broader hotel leadership team in overseeing evacuation procedures, duty manager coverage, and other safety protocols as needed.</li> <li><strong>Oversee contractor work:</strong> Supervise external contractors and inspect completed work for quality and compliance.</li> <li><strong>Lead energy efficiency initiatives:</strong> Support and oversee property-wide energy conservation programs to reduce utility costs.</li> </ul> <h4>What it takes to make the stay</h4> <p>At Hilton, our core values define what it takes to succeed here and guide the qualities we look for in every team member: a passion for spreading the light and warmth of hospitality; acting with integrity and always doing the right thing; inspiring others through leadership; a belief that teamwork drives the best outcomes; a sense of ownership and accountability; and a focus on the now, bringing urgency and discipline to every moment, knowing it can make a lasting impact.</p> <h4>How we’ll help you thrive</h4> <p>At Hilton, the hospitality we’re known for doesn’t end with our guests. We proudly invest in our team members’ wellbeing, supporting you through all of life’s moments. When you join Hilton, our exceptional care extends to you with unmatched perks and benefits, including*:</p> <ul> <li>Incredible travel perks – enjoy 110 nights of deeply discounted travel, with room rates as low as $40 USD per night at our world-class hotels through our Go Hilton travel program.</li> <li>Paid parental leave – because family matters. We offer paid leave for eligible team members, including partners and adoptive parents.</li> <li>Crisis concierge – in times of loss, our crisis concierge offers a single, compassionate point of contact for both practical support and emotional care.</li> <li>Mental health resources – your wellbeing comes first. Through our Care for All hub, we provide resources to help our team members care for themselves and their loved ones. In many countries, eligible team members receive free counseling and support through our Employee Assistance Program (EAP).</li> </ul> <p><em>*Benefits availability may vary depending on team member’s location as well as terms and conditions of employment and are subject to the terms and conditions of each specific program or plan.</em></p> <h4>Join an award-winning workplace culture</h4> <p>At Hilton, we don’t just deliver exceptional experiences for our guests—we build an exceptional workplace for the team members who make it all possible. As a global leader in hospitality, we’ve welcomed more than 3 billion guests worldwide, all while staying true to our founding vision: to fill the earth with the light and warmth of hospitality.</p> <p>Our award-winning culture has earned us repeated recognition on the world’s best workplaces list by Great Place to Work and Fortune. With our suite of world-class brands, and a company-wide commitment to providing the best stay for every guest, we’re setting new standards for the future of travel.</p> <p>Whether you’re starting your career or exploring something new, Hilton supports your journey every step of the way. Come for the job, stay for the career—and help us make every stay a little more magical.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Description</b>Overview<p>AtkinsRéalis is seeking an experienced Electrical Engineer to support the design review, construction supervision, testing, commissioning, and delivery of major high-rise residential, commercial, hospitality, mixed-use, and large-scale building developments in Madinah, Saudi Arabia. The successful candidate will ensure all electrical systems are designed, installed, tested, and commissioned in compliance with project specifications, Saudi regulations, international standards, quality requirements, and project schedules.</p><br>Your role<ul><li>Review and supervise electrical construction activities for high-rise and large-scale building projects.</li><li>Ensure electrical works are executed in accordance with approved drawings, specifications, project requirements, and industry standards.</li><li>Conduct site inspections and verify the quality of electrical installations.</li><li>Witness testing, commissioning, energization, and performance verification activities.</li><li>Review electrical load calculations, short-circuit studies, voltage drop calculations, and power distribution schemes.</li><li>Coordinate with architects, structural engineers, mechanical engineers, contractors, and utility providers to ensure seamless system integration.</li><li>Monitor contractor progress and ensure compliance with project schedules and milestones.</li><li>Identify construction issues and provide practical engineering solutions to maintain project progress.</li><li>Support authority inspections and utility coordination activities.</li><li>Ensure compliance with health, safety, environmental, and quality requirements throughout project execution.</li><li>Monitor installation quality and address defects, deficiencies, and non-conformances.</li><li>Review operation and maintenance manuals, testing reports, commissioning records, and as-built documentation.</li><li>Participate in design review meetings, progress meetings, technical workshops, and coordination sessions.</li><li>Assist in value engineering initiatives and recommend cost-effective electrical solutions.</li><li>Support project handover activities and defect liability period inspections.</li><li>Prepare technical reports, inspection reports, progress updates, and engineering recommendations.</li><li>Monitor implementation of energy-efficient and sustainable electrical systems.</li></ul>About you<ul><li>Bachelor's Degree in Electrical Engineering from a recognized university.</li><li>Master's Degree in Electrical Engineering, Building Services Engineering, or a related discipline is preferred.</li><li>Registration with the Saudi Council of Engineers (SCE) is preferred.</li><li>Professional Engineer (PE), Chartered Engineer (CEng), or equivalent professional certification is an advantage.</li><li>LEED AP, Mostadam, or sustainability-related certifications are desirable.</li><li><span>10 to 15 years of professional Electrical Engineering experience. </span></li><li><span>Minimum 5 years of experience on major high-rise and large-scale building projects.</span></li><li><span>Previous experience in Saudi Arabia or GCC countries is highly preferred. </span></li><li><span>Experience working with consultants, PMCs, developers, and contractors. </span></li><li><span>Demonstrated experience during construction, testing, commissioning, and handover phases.</span></li><li><span>Experience in electrical systems testing, commissioning, energization, and performance verification. </span></li><li><span>Strong understanding of sustainable building technologies and energy-efficient design principles. </span></li><li><span>Ability to review engineering calculations, technical specifications, and contractor submissions.</span></li></ul><span>Rewards &amp; benefits</span><p><span>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.</span></p><br><p><span>This includes:</span></p><br><ul><li>Tax-free salary.</li><li>Life insurance coverage.</li><li>Medical insurance.</li><li>Annual leave balance.</li><li>Company gratuity scheme.</li><li>Discretionary bonus program.</li><li>Annual flight contribution.</li><li>Transportation &amp; housing allowances.</li><li>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition.</li></ul><p><span>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</span></p><br><span>About AtkinsRéalis</span><p><span>We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people. </span></p><br><p><span>Find out more.</span></p><br><p><b>#Med</b></p><br><b>Worker Type</b>Employee<b>Job Type</b>Regular<p><span><i>At </i></span> <i><span>AtkinsRéalis</span></i><span><i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. &nbsp;</i></span></p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>