Automotive Engineer Jobs in Saudi

The Expert Rapid Ranger System Engineer will support the MTSD (Maintenance & Technical Support Department ) and the (Claint) during the maintenance contract<br>Responsibilities : Actively advising and assisting in all aspects of his specialty. Monitoring and analyzing factors that affect operational availability, RAPIDRanger system performance, support chain performance, and recommending/implementing corrective actions locally but also with the team located in UK. Evaluating performance of RAPIDRanger systems, data handling and communication equipment. Monitoring the Built-In Test equipment\software, analyze the results and recommend improvements. Performing intermediate level maintenance (Field Maintenance FM) in his specialty as required. Perform diagnostic checks, specialized maintenance, troubleshooting, and repair of the RAPIDRanger to ensure it remain operationally ready. Diagnosis and isolates complex electronic problems between the hardware, software and Line Replaceable Units (LRUs) using a variety of electronic repair and fault isolation procedures such as system diagnostics, unit self-checks, BITE, and tools and test equipment. Supporting Mobile Maintenance Team (MMT) functions and travel to remote sites to perform software maintenance, troubleshooting, and On the Job Training (OJT). To ensure the readiness of the RAPIDRanger system, communicate with the Contractor Experts in Europe to find solutions and fix malfunctions in case the engineer is unable to remedy errors alone Supporting and Transferring expertise and knowledge to Saudi technicians. Providing advice and assistance<br>Key Competencies, Skills & Knowledge Areas :<br>Overall experience with Weapon system and associated equipment and should include Safety Management Unit, Power Distribution Modules, Ethernet switch, Control Electronics Unit, Power Conditioning Unit, System Command and Control Unit, LMM missiles in Field Handling Containers (FHCs), and interface equipment. The technical knowhow should include weapon system LRUs including, Stabilized Sight Head, Turret, Panniers, Automatic Missile Interface Unit, power systems and other sub systems associated with the weapon system. Experience in a complex environment (multi-cultural, multi-disciplinary, matrix organization, customer interactions, etc Good understanding of wider CONTRACTOR support services<br>Qualifications<br>Bachelor of Science degree in Electronics/Electrical Engineering or Weapon Technology Minimum of 3-5 years of Knowledge, experience in operational and maintenance of Weapon system and associated equipment and communication equipment. The experience should include installation, testing, integration, upgrades and modifications to the weapon system. Strong scripting and technical skillsspeak English (French is an advantage) with excellent communication and interpersonal relationship management skills

Job Title: (Planning Engineer – Multiple Locations) Company: Alfanar Projects/ Alfanar Engineering construction Location: (Based on project needs) Job Type: Full-time About Alfanar Projects Since 1976, we’ve grown and diversified our business to meet the evolving needs of a changing world. Alfanar Projects is an integrated global project developer and engineering, construction, and technology solutions provider with a robust portfolio of landmark projects across the energy, water, and infrastructure sectors. From Saudi Arabia to the rest of the world, we work closely with governments and partners to deliver strategic projects that support national goals and long-term visions. Our work directly contributes to sustainable development and infrastructure modernization in multiple countries. At the heart of our success are more than 10,000 professionals, diverse, skilled, and united by purpose. Our global teams are committed to delivering impact-driven solutions that shape a better, more sustainable future. Role Overview We seek a qualified and driven Planning Engineer to join our expanding team. This role involves working across key infrastructure projects, ensuring high standards in delivery, compliance, and stakeholder collaboration. Key Responsibilities Develop, maintain, and update project schedules using scheduling software (e.g., Primavera P6, Microsoft Project). Prepare baseline schedules, resource-loaded schedules, and recovery plans. Monitor project progress and analyze schedule performance. Identify critical path activities and schedule risks. Coordinate with engineering, procurement, construction, and commissioning teams. Prepare weekly and monthly progress reports. Conduct delay analysis and propose mitigation measure Why Join Alfanar Projects Since 1976, we’ve grown and diversified our business to meet the evolving needs of a changing world. Alfanar Projects is an integrated global project developer and engineering, construction, and technology solutions provider with a robust portfolio of landmark projects across the energy, water, and infrastructure sectors. From Saudi Arabia to the rest of the world, we work closely with governments and partners to deliver strategic projects that support national goals and long-term visions. Our work directly contributes to sustainable development and infrastructure modernization in multiple countries. At the heart of our success are more than 10,000 professionals, diverse, skilled, and united by purpose. Our global teams are committed to delivering impact-driven solutions that shape a better, more sustainable future.

Electrical Engineer - CxA (Data Centre) Location: Saudi Arabia (Dammam)<br>About us At Core we believe that change is essential to growth and our new logos are reflections of our evolution as an organisation.<br>Operating under two specialised divisions, Core Emirates [for Commissioning Services] and Core International [for Project Management Services], we provide tailored services to meet the unique demands of diverse industry sectors. Core Group ME is the new central communication pathway.<br>Role Overview The Commissioning Engineer is responsible for planning, coordinating, and delivering L2–L5 commissioning activities for assigned systems or areas, ensuring technical compliance, quality, and readiness for acceptance.<br>The role balances technical delivery, documentation, and stakeholder coordination.<br>Key Responsibilities:L2 – Installation Verification Lead verification of installation readiness. Review and approve installation checklists, ITPs, and Method Statements. Ensure installations meet commissioning entry criteria. L3 – Individual Element Commissioning Plan and witness commissioning of individual items of plant and equipment. Verify correct operation, settings, controls, and protections. Confirm stability before progression to system testing. L4 – System Functional Testing Coordinate and witness system functional tests. Verify sequences of operation and system responses. Confirm compliance with design intent and operational requirements. L5 – Integrated Systems Testing Support Integrated Systems Testing activities. Validate resilience and recovery outcomes for assigned systems. Assist in client demonstrations and acceptance activities.<br>Authority & Decision-Making Can approve progression between commissioning stages within defined scope. Recommends acceptance or rejection of test results.<br>Technical Skills & Experience5–8 years commissioning experience in mission-critical or complex facilities. MUST have proven Data Centre or critical infrastructure exposure. Strong technical documentation and coordination skills.<br>Performance Measures Technical accuracy and robustness of testing Timely issue resolution and close-out Quality and completeness of documentation<br>We are committed to equal opportunities and welcome applications from all sections of the community.<br>We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Mechanical Engineer - CxA (Data Centre) Location: Dammam, Saudi Arabia<br>About us At Core we believe that change is essential to growth and our new logos are reflections of our evolution as an organisation.<br>Operating under two specialised divisions, Core Emirates [for Commissioning Services] and Core International [for Project Management Services], we provide tailored services to meet the unique demands of diverse industry sectors. Core Group ME is the new central communication pathway.<br>Role Overview The Mechanical Engineer is responsible for planning, coordinating, and delivering L2–L5 commissioning activities for assigned systems or areas, ensuring technical compliance, quality, and readiness for acceptance.<br>The role balances technical delivery, documentation, and stakeholder coordination.<br>Key Responsibilities:L2 – Installation Verification Lead verification of installation readiness. Review and approve installation checklists, ITPs, and Method Statements. Ensure installations meet commissioning entry criteria.<br>L3 – Individual Element Commissioning Plan and witness commissioning of individual items of plant and equipment. Verify correct operation, settings, controls, and protections. Confirm stability before progression to system testing.<br>L4 – System Functional Testing Coordinate and witness system functional tests. Verify sequences of operation and system responses. Confirm compliance with design intent and operational requirements.<br>L5 – Integrated Systems Testing Support Integrated Systems Testing activities. Validate resilience and recovery outcomes for assigned systems. Assist in client demonstrations and acceptance activities.<br>Authority & Decision-Making Can approve progression between commissioning stages within defined scope. Recommends acceptance or rejection of test results.<br>Technical Skills & Experience5–8 years commissioning experience in mission-critical or complex facilities. MUST have proven Data Centre or critical infrastructure exposure. Strong technical documentation and coordination skills.<br>Performance Measures Technical accuracy and robustness of testing Timely issue resolution and close-out Quality and completeness of documentation<br>We are committed to equal opportunities and welcome applications from all sections of the community.<br>We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analysing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

ELV Engineer - CxA (Data Centre) Location: Dammam, Saudi Arabia<br>About us At Core we believe that change is essential to growth and our new logos are reflections of our evolution as an organisation.<br>Operating under two specialised divisions, Core Emirates [for Commissioning Services] and Core International [for Project Management Services], we provide tailored services to meet the unique demands of diverse industry sectors. Core Group ME is the new central communication pathway.<br>Role Overview The ELV Engineer is responsible for planning, coordinating, and delivering L2–L5 commissioning activities for assigned systems or areas, ensuring technical compliance, quality, and readiness for acceptance.<br>The role balances technical delivery, documentation, and stakeholder coordination.<br>Key Responsibilities:L2 – Installation Verification Lead verification of installation readiness. Review and approve installation checklists, ITPs, and Method Statements. Ensure installations meet commissioning entry criteria. L3 – Individual Element Commissioning Plan and witness commissioning of individual items of plant and equipment. Verify correct operation, settings, controls, and protections. Confirm stability before progression to system testing. L4 – System Functional Testing Coordinate and witness system functional tests. Verify sequences of operation and system responses. Confirm compliance with design intent and operational requirements. L5 – Integrated Systems Testing Support Integrated Systems Testing activities. Validate resilience and recovery outcomes for assigned systems. Assist in client demonstrations and acceptance activities.<br>Authority & Decision-Making Can approve progression between commissioning stages within defined scope. Recommends acceptance or rejection of test results.<br>Technical Skills & Experience5–8 years commissioning experience in mission-critical or complex facilities. MUST have proven Data Centre or critical infrastructure exposure. Strong technical documentation and coordination skills.<br>Performance Measures Technical accuracy and robustness of testing Timely issue resolution and close-out Quality and completeness of documentation<br>We are committed to equal opportunities and welcome applications from all sections of the community.<br>We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Electrical Engineer - CxA (Data Centre) Location: Saudi Arabia (Dammam)<br>About us At Core we believe that change is essential to growth and our new logos are reflections of our evolution as an organisation.<br>Operating under two specialised divisions, Core Emirates [for Commissioning Services] and Core International [for Project Management Services], we provide tailored services to meet the unique demands of diverse industry sectors. Core Group ME is the new central communication pathway.<br>Role Overview The Commissioning Engineer is responsible for planning, coordinating, and delivering L2–L5 commissioning activities for assigned systems or areas, ensuring technical compliance, quality, and readiness for acceptance.<br>The role balances technical delivery, documentation, and stakeholder coordination.<br>Key Responsibilities:L2 – Installation Verification Lead verification of installation readiness. Review and approve installation checklists, ITPs, and Method Statements. Ensure installations meet commissioning entry criteria. L3 – Individual Element Commissioning Plan and witness commissioning of individual items of plant and equipment. Verify correct operation, settings, controls, and protections. Confirm stability before progression to system testing. L4 – System Functional Testing Coordinate and witness system functional tests. Verify sequences of operation and system responses. Confirm compliance with design intent and operational requirements. L5 – Integrated Systems Testing Support Integrated Systems Testing activities. Validate resilience and recovery outcomes for assigned systems. Assist in client demonstrations and acceptance activities.<br>Authority & Decision-Making Can approve progression between commissioning stages within defined scope. Recommends acceptance or rejection of test results.<br>Technical Skills & Experience5–8 years commissioning experience in mission-critical or complex facilities. MUST have proven Data Centre or critical infrastructure exposure. Strong technical documentation and coordination skills.<br>Performance Measures Technical accuracy and robustness of testing Timely issue resolution and close-out Quality and completeness of documentation<br>We are committed to equal opportunities and welcome applications from all sections of the community.<br>We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

ELV Engineer - CxA (Data Centre) Location: Dammam, Saudi Arabia<br>About us At Core we believe that change is essential to growth and our new logos are reflections of our evolution as an organisation.<br>Operating under two specialised divisions, Core Emirates [for Commissioning Services] and Core International [for Project Management Services], we provide tailored services to meet the unique demands of diverse industry sectors. Core Group ME is the new central communication pathway.<br>Role Overview The ELV Engineer is responsible for planning, coordinating, and delivering L2–L5 commissioning activities for assigned systems or areas, ensuring technical compliance, quality, and readiness for acceptance.<br>The role balances technical delivery, documentation, and stakeholder coordination.<br>Key Responsibilities:L2 – Installation Verification Lead verification of installation readiness. Review and approve installation checklists, ITPs, and Method Statements. Ensure installations meet commissioning entry criteria. L3 – Individual Element Commissioning Plan and witness commissioning of individual items of plant and equipment. Verify correct operation, settings, controls, and protections. Confirm stability before progression to system testing. L4 – System Functional Testing Coordinate and witness system functional tests. Verify sequences of operation and system responses. Confirm compliance with design intent and operational requirements. L5 – Integrated Systems Testing Support Integrated Systems Testing activities. Validate resilience and recovery outcomes for assigned systems. Assist in client demonstrations and acceptance activities.<br>Authority & Decision-Making Can approve progression between commissioning stages within defined scope. Recommends acceptance or rejection of test results.<br>Technical Skills & Experience5–8 years commissioning experience in mission-critical or complex facilities. MUST have proven Data Centre or critical infrastructure exposure. Strong technical documentation and coordination skills.<br>Performance Measures Technical accuracy and robustness of testing Timely issue resolution and close-out Quality and completeness of documentation<br>We are committed to equal opportunities and welcome applications from all sections of the community.<br>We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Mechanical Engineer - CxA (Data Centre) Location: Dammam, Saudi Arabia<br>About us At Core we believe that change is essential to growth and our new logos are reflections of our evolution as an organisation.<br>Operating under two specialised divisions, Core Emirates [for Commissioning Services] and Core International [for Project Management Services], we provide tailored services to meet the unique demands of diverse industry sectors. Core Group ME is the new central communication pathway.<br>Role Overview The Mechanical Engineer is responsible for planning, coordinating, and delivering L2–L5 commissioning activities for assigned systems or areas, ensuring technical compliance, quality, and readiness for acceptance.<br>The role balances technical delivery, documentation, and stakeholder coordination.<br>Key Responsibilities:L2 – Installation Verification Lead verification of installation readiness. Review and approve installation checklists, ITPs, and Method Statements. Ensure installations meet commissioning entry criteria.<br>L3 – Individual Element Commissioning Plan and witness commissioning of individual items of plant and equipment. Verify correct operation, settings, controls, and protections. Confirm stability before progression to system testing.<br>L4 – System Functional Testing Coordinate and witness system functional tests. Verify sequences of operation and system responses. Confirm compliance with design intent and operational requirements.<br>L5 – Integrated Systems Testing Support Integrated Systems Testing activities. Validate resilience and recovery outcomes for assigned systems. Assist in client demonstrations and acceptance activities.<br>Authority & Decision-Making Can approve progression between commissioning stages within defined scope. Recommends acceptance or rejection of test results.<br>Technical Skills & Experience5–8 years commissioning experience in mission-critical or complex facilities. MUST have proven Data Centre or critical infrastructure exposure. Strong technical documentation and coordination skills.<br>Performance Measures Technical accuracy and robustness of testing Timely issue resolution and close-out Quality and completeness of documentation<br>We are committed to equal opportunities and welcome applications from all sections of the community.<br>We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analysing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Senior Network Security Engineer is responsible for designing, implementing, and managing critical security systems, with a focus on Palo Alto Networks for data center security, Zero Trust Network Access (ZTNA) using Prisma and Citrix solutions, and Managed Detection and Response (MDR/SOC). This role ensures the security and integrity of the organization s network infrastructure by proactively identifying threats, mitigating vulnerabilities, and maintaining compliance with security policies and industry best practices.</p><p>Responsibilities</p><ul><li>Data Center Firewall Management: Implement and maintain Palo Alto firewall configurations, access controls, and security policies to safeguard network traffic and prevent unauthorized access.</li><li>Securing Remote Access (ZTNA): Implement and manage Prisma and Citrix ZTNA solutions to secure remote access, ensuring encrypted and authenticated user connections.</li><li>Managed Detection and Response (MDR): Administer and optimize MDR solutions to detect, analyze, and mitigate advanced security threats in real time.</li><li>Incident Response &amp; Threat Mitigation: Collaborate with Security Operations teams to investigate, analyze, and respond to security incidents effectively.</li><li>Network Security Hardening: Apply best practices for network segmentation, intrusion prevention, and vulnerability management to enhance overall security posture.</li><li>Compliance &amp; Reporting: Ensure adherence to industry security standards (e.g., NCA, NIST, ISO 27001) and generate reports for audits and security assessments.</li><li>Automation &amp; Optimization: Leverage automation tools to enhance threat detection, firewall rule management, and security policy enforcement.</li><li>Collaboration &amp; Training: Work with IT, Security, and Operations teams to align security strategies with business objectives and provide guidance on security best practices.</li><li>Documentation &amp; Reporting: Maintain detailed documentation of firewall policies, remote access solutions, and security incident reports.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Cybersecurity, Information Technology, or a related field; advanced degree preferred.</li><li>10+ years of experience in network security, firewall administration, ZTNA implementation or a related security domain.</li><li>Palo Alto Networks firewalls for data center security, Prisma Access, Citrix ZTNA, and MDR/SOCaaS platforms.</li><li>Knowledge of regulatory requirements and best practices for network security and incident response.</li><li>Strong analytical and troubleshooting abilities to investigate security incidents and optimize security controls.</li><li>Ability to work cross-functionally with IT and Security teams to implement and maintain security policies.</li><li>Palo Alto Networks Certified Network Security Engineer (PCNSE)</li><li>Citrix Certified Professional</li><li>CISSP, CISM</li><li>CCNP Security</li><li>GIAC Certified Incident Handler (GCIH)</li><li>Other relevant security certifications</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><span ><b>Job Summary:</b></span></p><p><span >The Junior Environmental Engineer will support environmental consultancy activities including</span></p><p><span >field sampling, environmental monitoring, data collection, and basic reporting. The role is</span></p><p><span >designed for a developing professional (0–2 years’ experience) who will gain hands-on exposure</span></p><p><span >to environmental site work, laboratory coordination, and regulatory compliance projects.</span></p><p><span ><b>Key Responsibili</b>ties</span></p><p><span >1. Field Sampling &amp; Site Work</span></p><p><span >• Assist in soil, groundwater, surface water, air, and waste sampling activities</span></p><p><span >• Support site investigations and environmental inspections</span></p><p><span >• Ensure proper sample handling, labeling, preservation, and chain of custody</span></p><p><span >• Follow standardized procedures aligned with United States Environmental Protection</span></p><p><span >Agency</span></p><p><span >2. Environmental Monitoring Support</span></p><p><span >• Assist in environmental monitoring programs (air quality, noise, water quality, soil</span></p><p><span >contamination)</span></p><p><span >• Support installation and operation of field monitoring equipment</span></p><p><span >• Collect field data accurately and maintain field logs</span></p><p><span >3. Laboratory Coordination</span></p><p><span >• Coordinate with internal or external laboratories for sample submission</span></p><p><span >• Track laboratory results and assist in preliminary data review</span></p><p><span >• Support testing related to parameters such as BOD, COD, TPH, heavy metals, and nutrients</span></p><p><span >4. Data Entry &amp; Basic Reporting</span></p><p><span >• Assist in organizing environmental data and results</span></p><p><span >• Prepare tables, charts, and summaries for technical reports</span></p><p><span >• Support preparation of baseline environmental reports and monitoring summaries</span></p><p><span >5. Compliance &amp; Standards Support</span></p><p><span >• Support compliance with local environmental regulations and</span></p><p><span >project requirements</span></p><p><span >• Assist in applying international standards such as ISO 14001</span></p><p><span >• Help ensure documentation aligns with regulatory expectations (e.g., WHO environmental</span></p><p><span >guidelines where applicable) World Health Organization</span></p><p><span >6. Health, Safety &amp; Field Discipline</span></p><p><span >• Follow all HSE procedures during field activities</span></p><p><span >• Wear appropriate PPE and follow site safety instructions</span></p><p><span >• Report hazards or unsafe conditions immediately</span></p><p><span >Qualifications</span></p><p><span >• Bachelor’s degree in Environmental Engineering, Environmental Science, Chemistry, or</span></p><p><span >related field</span></p><p><span >• Fresh graduates or up to 2 years of experience</span></p><p><span >Technical Skills</span></p><p><span >• Basic understanding of environmental sampling and field procedures</span></p><p><span >• Awareness of environmental parameters (water, soil, air quality indicators)</span></p><p><span >• Basic Microsoft Excel and reporting skills</span></p><p><span >• GIS knowledge is a plus but not required</span></p><p><span ><b>Soft Skills</b></span></p><p><span >• Eagerness to learn and develop technical skills</span></p><p><span >• Good teamwork and communication abilities</span></p><p><span >• Strong attention to detail</span></p><p><span >• Willingness to work in field conditions (including outdoor and industrial sites)</span></p><p><span >Key Performance Indicators (KPIs)</span></p><p><span >• Accuracy of field data collection and sample handling</span></p><p><span >• Timeliness in completing assigned tasks</span></p><p><span >• Compliance with HSE and sampling protocols</span></p><p><span >• Quality of basic data summaries and reporting support</span></p><p><span >Reporting Line</span></p><p><span >• Reports to: Environmental Engineer / Senior Consultant</span></p><p><span >• Works closely with: Field team, laboratory staff, and project consultants&nbsp;</span></p></div></section>

We have an exciting opportunity for a "Engineer 1 - Electrical Engineering " with our client in Saudi Arabia . Interested candidates are encouraged to send their CV to navika.srivastava@lancesoft.com<br>**Job Title:** Engineer 1 - Electrical Engineering**Location:** King Abdullah bin Abdul Aziz Science Park (KASP), Saudi Technology & Innovation Center, Dhahran Techno Valley, Dhahran 04 31261, Saudi Arabia**Contract Duration:** 12 Months<br>Description:Role Summary:- Will be responsible for providing expert technical input and organizational input to electrical engineering activities on a wide range of projects from studies and design to troubleshooting, commissioning, and decommissioning<br>Essential Responsibilities:-<br>* Primarily responsibility is to create electrical control cabinet design with all necessary documentation according to industry and customer requirements.* Use Micro Station CAD, Autodesk Inventor software to create, revise, review Project Drawings (System Interconnect, Power wiring, Layout drawings, Loop drawings, blocks, etc.)* Compliance to customer specifications for Hardware / Cabinets* Knowledge of industry codes and standards (IEEE, ANSI, NEC, IEC, NFPA).* Assist Project Engineer in customer witness testing of Hardware / Cabinet design functionality.* Follow quality procedures and standard design processes.* Develop detailed bills of material for panels.* Specify parts and develop ordering drawings. Update PE with job completion estimates and status* Provide performance based and economic evaluations, selection, application, troubleshooting and maintenance practices of protection devices.* Incorporate new design techniques to increase efficiency of Cabinet Engineering.* Responsible for executing defect-free designs in a timely manner.* Demonstrated ability to work in a global team environment,* Understanding of the electrical engineering concepts deemed necessary for designing the electrical cabinet* Understanding of NEMA/IP classifications<br>Essential Requirements of the role (Experience / Skills / Competencies):-•Years of experience: 3+ years•Field of experience: 3+ years field / projects / maintenance experience (working with instrumentation, control systems) in energy and/or oil & gas environment or relevant field will be an added advantage.•Technical Skills: ? Refer attached Desired & Essential Functions (Responsibilities):•Soft Skills: Good written and spoken communication skills in English, with demonstrated capability to structure and write technical material.•Tools or Software (Required / Preferred): Proven experience with document layout, formatting, and editing.•Education Qualifications: Bachelors or Diploma in Instrumentation / Electronics / Electrical or equivalent and up to 5+yrs experience.•Industry Background or Experience (Required / Preferred): Knowledge of rotating machinery operation and controls systems.•Target Companies: ? Any•Off-limits Companies: ? Not clear .•Required Accreditations / Qualifications / Certification / Licenses including Driving License: Ability and willingness to travel for site survey •Self-starter with minimal supervision requirement; able to work independently; ability to prioritize, organize work and meet deadlines<br>Desirable attributes of the worker (Experience / Skills / Competencies):-* Strong preference for individuals experienced in design of Bently Nevada machinery protection cabinet and control products.* Knowledge of Cabinet design engineering,* Knowledge of Bently Nevada machinery protection and management systems products and services.* 3+ years field / projects / maintenance experience (working with instrumentation, control systems) in energy and/or oil & gas environment or relevant field will be an added advantage.* Understanding of ISO 9001 design control standards* Prior experience with utility protection and control design standards* Knowledge of LV control circuit, fuse and circuit breaker coordination* Prior experience following quality assurance processes while working in a projects schedule-driven environment<br>Interested candidates should send their CV along with the following details:Expected salary Visa/Work Permit status Notice Period Current Location

This position is listed on behalf of a partner company, who manages all applications and next steps. Our partner is looking for a Plant Integration Engineer (Electrical) based in Saudi Arabia.<br><br>This role provides the opportunity to contribute to the development of a next-generation energy project by supporting complex electrical engineering integration activities.<br><br>As a Plant Integration Engineer (Electrical), you will collaborate with multidisciplinary teams to ensure the successful design, coordination, and delivery of critical plant systems.<br><br>You will play a key role in connecting engineering teams, contractors, and technical stakeholders while maintaining high standards of quality and compliance.<br><br>The position combines technical expertise, project coordination, and problem-solving within a highly collaborative engineering environment.<br><br>You will contribute to the development of innovative solutions while supporting project milestones, safety requirements, and regulatory expectations.<br><br>This opportunity is ideal for an experienced electrical engineer who enjoys tackling complex challenges and driving technical excellence.<br><br>Accountabilities<br><br>The Plant Integration Engineer (Electrical) will support engineering integration, design coordination, and technical oversight activities across a complex industrial project. The role requires close collaboration with internal teams, contractors, and subject matter experts to ensure successful project execution. Key responsibilities include:<br><br>Support engineering and design collaboration between multidisciplinary teams involved in plant systems development and construction activities. Provide technical oversight of electrical system designs developed by engineering partners and subcontractors, from functional requirements through final design. Coordinate design handoffs and ensure technical accuracy, consistency, and alignment with project requirements. Develop, review, and maintain electrical engineering deliverables, including procurement specifications, requirements documents, system descriptions, calculations, diagrams, and engineering change packages. Evaluate electrical systems against applicable classification requirements, industry standards, codes, licensing requirements, and regulatory expectations. Integrate electrical scope and requirements with mechanical, nuclear, instrumentation, controls, and other engineering disciplines. Review technical documentation and support responses related to regulatory communications and licensing activities. Assist with the preparation and revision of safety analysis documentation. Support continuous improvement initiatives by applying engineering best practices and identifying opportunities for process enhancements. Coordinate technical problem-solving efforts to maintain project schedules and achieve engineering objectives. Lead collaboration efforts across geographically distributed teams, contractors, and technical partners.<br><br>Requirements<br><br>The ideal candidate is an experienced electrical engineer with strong expertise in system integration, technical coordination, and complex engineering projects. Required qualifications and skills include:<br><br>Bachelor’s degree in Engineering or equivalent technical education; advanced degrees are considered an advantage. Minimum of 10 years of direct experience with demonstrated electrical systems expertise. Proven experience coordinating and integrating multiple organizations involved in engineering design and project delivery. Previous experience with nuclear electrical systems design is strongly preferred. Familiarity with Class 1E standards, including IEEE 308, IEEE 323, IEEE 344, IEEE 379, IEEE 383, IEEE 384, and IEEE 741, is preferred. Knowledge of nuclear power plant quality assurance requirements, including 10 CFR 50 Appendix B and ASME NQA-1, is highly desirable. Experience with transmission system design, protection, control, and planning is an advantage. Familiarity with engineering design software tools such as ETAP, Auto CAD Standard, Auto CAD Electrical, or Solid Works is preferred. Strong technical writing, communication, and presentation skills. Excellent attention to detail with a commitment to technical excellence and quality. Ability to independently coordinate engineering activities and lead teams with minimal supervision. Strong problem-solving skills with the ability to manage competing priorities and complex design constraints. Ability to work effectively across multiple disciplines and simultaneous projects. Experience supporting new-build projects is preferred. Proficiency with Microsoft Office Suite and Adobe Professional. High level of integrity, accountability, teamwork, and professional communication skills.<br><br>Benefits<br><br>The role offers a competitive compensation package and the opportunity to contribute to a technically advanced engineering project. Benefits include:<br><br>Competitive hourly compensation range of $69-$115 per hour. Medical, dental, and vision coverage for eligible full-time employees. Opportunity to work remotely within a flexible project environment. Exposure to complex engineering challenges and innovative energy solutions. Collaboration with experienced international engineering teams and technical experts. Opportunity to contribute to a high-impact project focused on safety, quality, and technical excellence.<br><br>How Jobgether Works<br><br>We use an AI-powered matching process to ensure your application is reviewed quickly, objectively, and fairly against the role's core requirements. Our system identifies the top-fitting candidates, and this shortlist is then shared directly with the hiring company. The final decision and next steps (interviews, assessments) are managed by their internal team.<br><br>We appreciate your interest and wish you the best!<br><br> Why Apply Through Jobgether?<br><br>Data Privacy Notice: By submitting your application, you acknowledge that Jobgether will process your personal data to evaluate your candidacy and share relevant information with the hiring employer. This processing is based on legitimate interest and pre-contractual measures under applicable data protection laws (including GDPR). You may exercise your rights (access, rectification, erasure, objection) at any time.<br><br>We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The role of an Interior Architecture and Design Engineer presents an exciting opportunity to be part of a dynamic and innovative team in the field of architectural design. We are looking for a professional who possesses a strong artistic sense and the ability to translate ideas into tangible designs, contributing to the enhancement of both indoor and outdoor spaces. In this position, you will work with a group of distinguished clients, providing you with opportunities to expand your skills and build a strong network of relationships in the field.</p><p>Our work environment is characterized by collaboration and teamwork, where all team members are encouraged to share ideas and participate in projects. We believe in the importance of professional development, so we will provide you with opportunities for continuous training and learning. You will have the chance to work on diverse projects, enabling you to develop your technical and managerial skills equally. We are looking for an individual passionate about architectural design and eager to contribute to achieving the company's vision.</p><p>As an Interior Architecture and Design Engineer, you will play a vital role in shaping the spaces where people live and work. You will have the opportunity to apply the latest trends in design and utilize advanced technologies to improve work quality. We will also provide you with the necessary support to achieve your professional goals, helping you elevate your career to new levels.</p><p><b>Responsibilities:</b></p><ol><li>Develop innovative architectural designs that meet client needs, using advanced design software such as AutoCAD and SketchUp.</li><li>Conduct analytical studies of sites and surrounding environments to ensure design compliance with environmental and architectural requirements.</li><li>Manage projects from inception to completion, including planning, execution, and evaluation, to ensure timely achievement of objectives.</li><li>Collaborate with multiple specialized teams, including engineers and contractors, to ensure effective coordination of all project aspects.</li><li>Provide design consultations to clients, assisting them in making informed decisions regarding indoor and outdoor spaces.</li><li>Stay updated on the latest trends in architectural design and apply them in projects to ensure innovative solutions.</li><li>Prepare project documentation and evaluation proposals, facilitating effective communication with clients and investors.</li><li>Assess materials and techniques used in projects to ensure quality and economic efficiency.</li><li>Participate in meetings with clients and investors to present updates and recommendations regarding project advancement.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li><b>PhD Holder</b></li><li>Advanced architectural design skills to understand project requirements and translate them into effective designs.</li><li>Project management skills to ensure timely achievement of objectives and adherence to specified budgets.</li><li>Ability to use design software such as AutoCAD and SketchUp to develop drawings and designs.</li><li>Effective communication skills for interacting with clients and understanding their needs.</li><li>Strong knowledge of materials and architectural techniques to ensure quality delivery.</li><li>Ability to work within a multidisciplinary team to ensure effective coordination among all stakeholders.</li><li>Creative thinking and the ability to propose innovative solutions to architectural challenges.</li></ul></div>

Job Title : Environmental Engineer Location : Saudi Arabia <br>Job Purpose The Environmental Engineer will support the Senior Sustainability and Environmental Manager in implementing, monitoring and maintaining compliance with the project's Environmental Management Plan (EMP) / CEMP across all construction activities on the D01C Project, ensuring compliance with Saudi environmental regulations and ABCC's ISO 14001:2015 Environmental Management System.<br>Key Responsibilities Implement and coordinate the requirements of the project's Environmental and Sustainability Management Plan EMP / SMP, ESCP, C&DWMP within assigned work areas. Possess working knowledge of LEED and/or Mostadam requirements, with practical experience supporting environmental and sustainability implementation on at least one LEED- or Mostadam-certified construction project. Advise construction management, supervisors and site teams on the environmental controls required for planned activities. Prepare and review environmental aspects and impacts assessments, environmental risk assessments and activity-specific control measures. Review subcontractor environmental method statements to confirm required controls are in place before work starts. Conduct regular site inspections (daily, weekly and monthly) to verify compliance with EMP requirements, permit conditions and approved method statements. Monitor construction activities to prevent or minimize impacts related to dust, noise, waste, wastewater, spills, soil contamination and ecology. Identify environmental non-conformances and unsafe practices; ensure corrective and preventive actions are assigned, tracked and closed out. Deliver environmental inductions, toolbox talks and awareness training and maintain training records. Support the investigation, reporting and close-out of environmental incidents, spills, complaints and near misses. Maintain environmental registers and records, including permits, waste tracking, monitoring data, inspections, incidents and audit findings. Liaise with the Consultant, regulatory authorities (NCEC, MEWA, NCW, NCVC) and other stakeholders on environmental matters. Support internal and external environmental audits and help maintain alignment with ABCC's ISO 14001:2015 Environmental Management System. Qualifications & Experience Bachelor’s degree in environmental engineering, Environmental Science, Chemical Engineering or a related discipline from a recognized university. Minimum 7–10 years' relevant GCC experience in environmental management on construction or infrastructure projects, experience on large-scale developments project. Working knowledge of Saudi environmental regulations and the relevant permitting authorities (NCEC, MEWA, NCW, NCVC). Professional certification highly desirable Environmental Diploma Level 6 or 7, Nebosh EMC, IESP membership, ISO 14001 and Saudi Council of Engineers membership is required. Preferable certifications, LEED, and Mostadam. Practical experience with EMP/CEMP implementation, environmental monitoring, incident investigation and corrective action tracking. Fluent in English (mandatory per project contract conditions); Arabic is an advantage. Skills & Competencies Strong report writing, documentation and record-keeping skills. Good communication and stakeholder management across client, consultant, subcontractor and regulatory interfaces. High attention to detail with sound, practical judgement on active construction sites. Proficient in MS Office; familiarity with environmental/EHS data management systems. Able to work effectively within a large, fast-paced, multi-stakeholder megaproject team.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a creative and dedicated Mechanical Engineer specializing in infrastructure to become part of our team in market research. You will be part of a dynamic work environment where you can explore new ideas and apply advanced solutions. This is a fantastic opportunity to develop your skills in mechanical engineering, where you will work on diverse projects that directly impact the success and growth of the company.</p><p>You will have the opportunity to work with a team of skilled professionals who share the same passion. We believe in developing our employees and provide continuous training programs and workshops to enhance their technical and managerial skills. In this role, you will be able to improve your problem-solving skills, critical thinking, and teamwork, which will help you advance in your career.</p><p>As a Mechanical Engineer specializing in infrastructure, you will play a vital role in designing and implementing engineering solutions that meet our clients' needs. We are looking for someone with strategic thinking abilities and the capacity to influence through diverse teams, which will assist us in achieving our long-term goals. If you are looking for a work environment that encourages innovation and growth, this is the right place for you.</p><ol><li><b>Responsibilities:</b> Develop and design integrated mechanical systems for infrastructure, focusing on efficiency and cost-effectiveness, using advanced design software such as AutoCAD and SolidWorks.</li><li>Conduct necessary engineering analyses to ensure compliance with all standards and technical requirements, contributing to the improvement of project quality.</li><li>Collaborate with multidisciplinary teams to identify technical requirements and evaluate advanced solutions, facilitating the implementation process and enhancing collaboration among teams.</li><li>Manage infrastructure projects from start to finish, including planning, execution, and monitoring, to ensure timely achievement of objectives and adherence to the specified budget.</li><li>Provide technical support to workers and contractors, including troubleshooting technical issues and enhancing client satisfaction to achieve positive results.</li><li>Evaluate and analyze the performance of existing systems and provide recommendations to improve efficiency and performance, enhancing operational effectiveness.</li><li>Provide regular reports to management regarding project progress and potential risks, assisting in making appropriate strategic decisions.</li><li>Participate in the development of standards and work procedures to ensure compliance with best practices in the industry, enhancing the company's reputation in the market.</li><li>Train and mentor new engineers and staff within the team, contributing to building a culture of learning and growth within the organization.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Advanced engineering design skills, with the ability to use design software such as AutoCAD and SolidWorks.</li><li>Strong analytical skills, with the ability to conduct detailed analyses to ensure project quality.</li><li>Project management skills, with the ability to plan and execute effectively.</li><li>Ability to work within a multidisciplinary team, enhancing collaboration among different teams.</li><li>Effective communication skills, both verbal and written, to ensure smooth information exchange.</li><li>Familiarity with the latest trends and technologies in mechanical engineering and infrastructure.</li><li>Ability to think critically and solve problems, focusing on evaluating advanced and effective solutions.</li></ul></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Linux, Kubernetes &amp; Veeam Infrastructure Engineer Location: Riyadh, Saudi Arabia Employment Type: Full-Time / Contract Experience Required: 3 5 Years Domain: Infrastructure Operations / Platform Engineering / Cybersecurity Note : Must be Saudi National Job Summary We are seeking a highly motivated and technically skilled Linux, Kubernetes &amp; Veeam Infrastructure Engineer to support the administration, security, monitoring, and operational management of enterprise Linux systems, Kubernetes container platforms, and Veeam Backup &amp; Recovery environments. The successful candidate will be responsible for maintaining platform stability, security compliance, backup integrity, disaster recovery readiness, and operational excellence across critical infrastructure environments. This role requires strong expertise in Linux administration, container orchestration, backup and recovery technologies, security hardening, and operational support. Key Responsibilities Linux Systems Administration &amp; Security Administer, maintain, and support Linux-based servers and enterprise services. Perform Linux security hardening in accordance with organizational and industry security standards. Monitor system performance, availability, resource utilization, and service health. Review system logs, user activities, and security events to identify risks and operational issues. Manage operating system patching, upgrades, and vulnerability remediation activities. Conduct configuration compliance assessments and implement corrective actions. Troubleshoot operating system, application, and infrastructure-related issues. Support capacity planning, performance tuning, and operational optimization initiatives. Kubernetes &amp; Container Platform Administration Administer and support Kubernetes clusters and containerized workloads in production environments. Monitor cluster health, node performance, container activities, and orchestration events. Implement and maintain Kubernetes security best practices and governance standards. Validate container image security and perform vulnerability assessments. Configure and monitor container runtime security controls. Manage role-based access control (RBAC), namespaces, policies, and cluster configurations. Support deployment automation and integration with CI/CD pipelines. Integrate Kubernetes platforms with centralized logging, monitoring, SIEM, and cloud security solutions. Perform compliance assessments and remediation activities for containerized environments. Veeam Backup &amp; Recovery Administration Administer and maintain Veeam Backup &amp; Replication infrastructure. Configure, schedule, and monitor backup, replication, and recovery jobs. Perform backup health checks and proactively resolve backup failures. Monitor storage capacity, backup performance, and infrastructure utilization. Conduct regular restore testing to validate backup integrity and recovery readiness. Ensure compliance with backup retention, recovery objectives (RPO/RTO), and organizational policies. Support disaster recovery planning, testing, and documentation. Continuously improve backup and recovery processes and operational procedures. Security &amp; Compliance Support vulnerability management and remediation activities across Linux and Kubernetes environments. Monitor and respond to infrastructure security alerts and incidents. Ensure compliance with security baselines, hardening standards, and operational controls. Assist with audit activities, compliance reporting, and security assessments. Maintain technical documentation, operational procedures, and infrastructure diagrams. Required Technical Skills Linux Administration Red Hat Enterprise Linux (RHEL) Oracle Linux Ubuntu Linux Linux Security Hardening Shell Scripting (Bash) User &amp; Access Management System Performance Monitoring Patch Management Log Analysis &amp; Troubleshooting Kubernetes &amp; Containers Kubernetes Administration Container Security Docker RBAC Management Container Image Security Cluster Monitoring &amp; Troubleshooting Helm Kubernetes Networking Namespace &amp; Policy Management Backup &amp; Recovery Veeam Backup &amp; Replication Backup Administration Replication &amp; Recovery Operations Restore Testing Disaster Recovery Planning Backup Monitoring &amp; Optimization Security &amp; Monitoring Vulnerability Management Configuration Compliance Security Hardening SIEM Integration Centralized Logging Security Monitoring &amp; Incident Response DevOps &amp; Automation (Preferred) CI/CD Pipelines Git Jenkins GitLab CI/CD Ansible Terraform Python (Basic to Intermediate) Qualifications Bachelor s Degree in Computer Science, Information Technology, Engineering, Cybersecurity, or a related field. Relevant certifications are highly desirable. Experience Requirements 3 5 years of hands-on experience in Linux Systems Administration. Experience managing Kubernetes and containerized environments in production. Hands-on experience with Veeam Backup &amp; Replication administration. Experience supporting enterprise infrastructure operations and security compliance initiatives. Experience with vulnerability remediation and operational monitoring. Preferred Certifications Linux RHCSA (Red Hat Certified System Administrator) RHCE (Red Hat Certified Engineer) Linux Professional Institute Certification (LPIC) Kubernetes Certified Kubernetes Administrator (CKA) Certified Kubernetes Security Specialist (CKS) Certified Kubernetes Application Developer (CKAD) Backup &amp; Recovery Veeam Certified Engineer (VMCE) Security Security+ CISSP (Preferred) Certified Cloud Security Professional (CCSP) Soft Skills Strong analytical and troubleshooting abilities. Excellent problem-solving skills. Good communication and technical documentation capabilities. Ability to work independently and within cross-functional teams. Strong attention to detail and operational discipline. Ability to manage multiple priorities in a dynamic environment. Must-Have Requirements 3 5 years of Linux Administration experience. Hands-on Kubernetes administration and container security experience. Experience with Veeam Backup &amp; Replication. Linux security hardening and patch management. Backup monitoring, restore testing, and disaster recovery support. Vulnerability remediation and compliance validation experience. Experience supporting production infrastructure environments. Share</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Required Technical Skills</strong> Linux Administration Red Hat Enterprise Linux (RHEL) Oracle Linux Ubuntu Linux Linux Security Hardening Shell Scripting (Bash) User &amp; Access Management System Performance Monitoring Patch Management Log Analysis &amp; Troubleshooting Kubernetes &amp; Containers Kubernetes Administration Container Security Docker RBAC Management Container Image Security Cluster Monitoring &amp; Troubleshooting Helm Kubernetes Networking Namespace &amp; Policy Management Backup &amp; Recovery Veeam Backup &amp; Replication Backup Administration Replication &amp; Recovery Operations Restore Testing Disaster Recovery Planning Backup Monitoring &amp; Optimization Security &amp; Monitoring Vulnerability Management Configuration Compliance Security Hardening SIEM Integration Centralized Logging Security Monitoring &amp; Incident Response DevOps &amp; Automation (Preferred) CI/CD Pipelines Git Jenkins GitLab CI/CD Ansible Terraform Python (Basic to Intermediate) <strong>Qualifications</strong> Bachelor s Degree in Computer Science, Information Technology, Engineering, Cybersecurity, or a related field. Relevant certifications are highly desirable. <strong>Experience Requirements</strong> 3 5 years of hands-on experience in Linux Systems Administration. Experience managing Kubernetes and containerized environments in production. Hands-on experience with Veeam Backup &amp; Replication administration. Experience supporting enterprise infrastructure operations and security compliance initiatives. Experience with vulnerability remediation and operational monitoring. <strong>Preferred Certifications</strong> Linux RHCSA (Red Hat Certified System Administrator) RHCE (Red Hat Certified Engineer) Linux Professional Institute Certification (LPIC) Kubernetes Certified Kubernetes Administrator (CKA) Certified Kubernetes Security Specialist (CKS) Certified Kubernetes Application Developer (CKAD) Backup &amp; Recovery Veeam Certified Engineer (VMCE) Security Security+ CISSP (Preferred) Certified Cloud Security Professional (CCSP) <strong>Soft Skills</strong> Strong analytical and troubleshooting abilities. Excellent problem-solving skills. Good communication and technical documentation capabilities. Ability to work independently and within cross-functional teams. Strong attention to detail and operational discipline. Ability to manage multiple priorities in a dynamic environment. <strong>Must-Have Requirements</strong> 3 5 years of Linux Administration experience. Hands-on Kubernetes administration and container security experience. Experience with Veeam Backup &amp; Replication. Linux security hardening and patch management. Backup monitoring, restore testing, and disaster recovery support. Vulnerability remediation and compliance validation experience. Experience supporting production infrastructure environments.</p><p></p></section>

We are looking for a Procurement Engineer who will be responsible for handling the procurement process within Pico Play. This includes sourcing materials, managing supplier relationships, and coordinating with the local team, ensuring efficient and cost-effective procurement to meet project needs. The role also involves liaising between local clients in Saudi Arabia and the Pico Play tender team in KL, ensuring smooth communication and timely procurement for tenders. Key Responsibilities Develop and implement procurement strategies that align with project and organizational goals. Oversee the end-to-end procurement process, including tendering, negotiations, vendor selection, and contract management. Evaluate and qualify suppliers, ensuring compliance with quality, cost, and delivery requirements. Collaborate with project managers, engineers, and stakeholders to identify material and service needs. Analyse market trends to source the best products, services, and suppliers. Ensure timely delivery of materials and services to meet project schedules. Manage procurement budgets, ensuring cost-effectiveness and accountability. Monitor supplier performance, addressing any issues related to delivery, quality, or service. Prepare and maintain detailed procurement records and reports for audits and reviews. Implement and enforce procurement policies and procedures. Foster relationships with key suppliers to ensure long-term partnerships. Skills and Qualifications Bachelor’s degree in engineering, Supply Chain Management, or a related field. Minimum of 7+ years of experience in procurement within the MEP, AVCL, fitout or a related field. Strong knowledge of procurement best practices, vendor management, and market analysis. Proficiency in ERP systems and procurement software. Excellent negotiation and communication skills. Strong understanding of contractual terms and conditions. Ability to manage multiple projects simultaneously and meet deadlines. Knowledge of local and international procurement regulations. Preferred Qualifications Professional certifications such as CIPS, PMP, or equivalent. Experience in sustainable procurement practices. Proficiency in multiple languages is a plus.

Job Summary We are seeking a motivated Junior Structural Engineer to support the structural engineering team in the design, coordination, and documentation of building projects. The successful candidate will assist in preparing structural calculations, drawings, and technical documentation while ensuring compliance with project specifications, engineering standards, and applicable codes. Key Responsibilities Assist in preparing structural calculations, technical reports, drawings, and design documentation. Support the structural design of buildings and other structures under the guidance of senior engineers. Review structural drawings and ensure coordination with architectural and MEP disciplines. Assist in analyzing structural elements and verifying compliance with applicable codes, standards, and project requirements. Support the preparation and review of shop drawings and material submittals. Assist in reviewing tender and IFC drawings and identifying design discrepancies. Coordinate with architects, MEP engineers, consultants, and project teams to resolve design-related issues. Assist in preparing material take-offs and quantity estimates for structural works. Participate in site visits to monitor construction activities and verify compliance with approved drawings and specifications. Support the preparation of technical packages and engineering documentation. Assist in reviewing technical submittals from suppliers and subcontractors. Maintain accurate project records and engineering documentation. Support the implementation of HSE initiatives and comply with company safety policies and IMS requirements. Requirements Bachelor's Degree in Civil Engineering or Structural Engineering.0–3 years of experience in structural engineering (internship experience is a plus). Basic knowledge of structural analysis and reinforced concrete and steel design principles. Familiarity with international design codes and engineering standards. Proficiency in Auto CAD; knowledge of ETABS, SAFE, SAP2000, STAAD. Pro, or Revit Structure is an advantage. Strong analytical, problem-solving, and organizational skills. Ability to coordinate effectively with multidisciplinary engineering teams. ERP knowledge (preferably SAP) is an advantage. GCC experience is not required but will be considered an advantage. Strong communication skills and willingness to learn in a fast-paced engineering environment.

Company Description Bis Chat is a next-generation messaging application focused on delivering fast, secure, and privacy-first communication for a global user base. The platform supports instant text messaging, high-quality media sharing, and clear audio transmission, with innovative broadcasting features under active development. Currently in Exclusive Beta on both the Apple App Store and Google Play Store, Bis Chat is refining its core architecture, including advanced broadcasting and asset management modules. A lean, dedicated technical team drives rapid release cycles and continuous innovation, while collaborating closely with early adopters and global testers to build a product users trust and enjoy.<br>Role Description As a Senior Software Engineer at Bis Chat, you will design, implement, and maintain scalable backend services and core application components for our messaging platform. You will work closely with product and engineering peers to translate requirements into robust technical solutions, optimize performance and reliability, and ensure high standards of security and privacy. Day-to-day responsibilities include architecting new features, reviewing code, mentoring other engineers, troubleshooting production issues, and contributing to continuous integration and deployment improvements. This is a full-time remote role, offering flexibility in location while requiring strong collaboration across distributed teams.<br>Qualifications<br> Solid foundation in Computer Science, including data structures, algorithms, and systems design. Proficiency in Software Development and Programming, with experience building production-grade applications. Strong skills in Back-End Web Development, including APIs, microservices, and database integration. Experience with Object-Oriented Programming (OOP) and clean, maintainable code practices. Hands-on experience with distributed systems, messaging or real-time communication platforms is highly beneficial. Knowledge of security best practices, privacy-by-design principles, and performance optimization for large-scale applications. Comfort working in an agile, fast-paced environment with remote, cross-functional teams. Bachelor’s or Master’s degree in Computer Science, Software Engineering, or a related field, or equivalent practical experience.

We are looking for an experienced Senior QA/QC Engineer – Soil & Concrete to join our Project Quality team. The successful candidate will be responsible for ensuring that all earthworks, concrete works, and material testing activities comply with project specifications, approved Inspection and Test Plans (ITPs), applicable codes and standards, and the company's quality management requirements throughout the project lifecycle.<br><br>Key Responsibilities:Implement and monitor Inspection & Test Plans (ITPs), Hold Points, Witness Points, and acceptance criteria. Review geotechnical investigation reports and supervise excavation, shoring, backfilling, and compaction works. Verify site readiness and approve concrete pour requests before casting operations. Monitor concrete production, delivery, placement, vibration, curing, and protection activities. Supervise fresh concrete testing, including slump, temperature, and sampling, and review hardened concrete test results.investigate non-conforming test results and coordinate corrective and preventive actions. Inspect structural concrete after formwork removal and oversee defect assessment and repair activities. Coordinate with accredited laboratories, ready-mix concrete suppliers, consultants, and contractors to ensure quality compliance. Prepare inspection reports, NCRs, quality records, and technical documentation using the company's Quality Management System. Support continuous improvement initiatives by identifying quality risks and recommending preventive actions. Qualifications: Bachelor's Degree in Civil Engineering. Valid registration with the Saudi Council of Engineers (SCE). Minimum 8 years of experience in construction projects involving soil works, concrete works, QA/QC, and materials testing. At least 4 years of dedicated experience in Quality Assurance/Quality Control. Previous experience in Saudi Arabia within real estate development or construction projects. Strong knowledge of concrete technology, geotechnical engineering, inspection procedures, and quality management systems. Experience working with accredited laboratories, concrete suppliers, and earthworks contractors. Proficiency in digital quality management systems (e.g., Odoo or similar). Preferred Qualifications:Professional certifications or training in Quality Management Systems (ISO 9001 or equivalent). Specialized certifications in soil testing, concrete testing, construction materials, or QA/QC. Excellent analytical, communication, and technical reporting skills.