388 Jobs Found
Save and set alert for similar positionsManage alerts
<p>The job objective is to ensure a safe and healthy work environment across various construction sites, directly supervise contractors' and workers' compliance with occupational safety standards, and reduce construction-related falls and injuries to ensure the project proceeds without interruption. Assigned tasks and responsibilities </p><ul><li>High-altitude work safety: Inspecting scaffolding, work platforms, and safety harnesses, and ensuring the strict application of fall protection systems.</li><li>Excavation and earthworks management: Monitoring excavation processes, ensuring side support, preventing soil collapse or water ingress, and securing surrounding areas.</li><li>Heavy machinery monitoring: Supervising the movement of cranes, bulldozers, and heavy equipment, and ensuring operators are qualified and hold the necessary licenses.</li><li>HSE Plan management: Preparing and updating the safety plan for each construction site and obtaining approval from the project consultant or the owner.<br> </li></ul><p>Specific requirements and qualifications </p><ul><li>Education: Bachelor's degree in Engineering (Civil, Architectural, Safety, Mechanical, or Electrical) with specialized courses in construction safety.<br> </li><li>Preferred certifications: NEBOSH IGC or OSHA Construction (specific to construction, not general industry).</li><li>Skills: Ability to work in the field under various weather conditions and a strong personality to exercise Stop Work Authority for any activities that pose an immediate threat to workers' lives.</li></ul>
<p>The job objective is to ensure a safe and healthy work environment at various construction sites, directly supervise contractors' and workers' compliance with occupational safety standards, and reduce falls and construction-related injuries to ensure project continuity without interruption. Assigned tasks and responsibilities</p><ul><li>Safety in high-altitude work: Inspecting scaffolding, work platforms, and safety harnesses, and ensuring the strict implementation of fall protection systems.</li><li>Excavation and earthwork management: Monitoring excavation operations, ensuring shoring of sides, preventing soil collapse or water ingress, and securing surrounding areas.</li><li>Heavy machinery monitoring: Supervising the movement of cranes, bulldozers, and heavy equipment, and ensuring the competence of operators and their possession of the necessary licenses.</li><li>HSE Plan management: Preparing and updating the safety plan for each construction site and obtaining approval from the project consultant or owner.</li></ul><p>Specific requirements and qualifications</p><ul><li>Education: Bachelor's degree in engineering (Civil, Architectural, Safety, Mechanical, or Electrical) with specialized courses in construction safety.</li><li>Preferred certifications: NEBOSH IGC or OSHA Construction certification (for construction, not general industry).</li><li>Skills: Ability to work in the field under various weather conditions, and strong personality to have the authority to stop any work that poses an immediate risk to the lives of workers (Stop Work Authority).</li></ul>
<p>(Iron products with porcelain coating)</p><p> </p><p>Job Description:</p><p>A major industrial company is seeking to recruit a Production Manager (Iron Industries) with leadership experience and high efficiency to fully supervise production operations within the factory, develop production lines, and ensure the achievement of production plans with the highest quality and within scheduled deadlines while increasing resource utilization efficiency.</p><p> </p><p> </p><p>Tasks and Responsibilities:</p><p>Minimum of 5 years of experience in managing iron industry production.</p><p>Knowledge of forming, welding, and assembling structures, metalwork, and iron products.</p><p>Planning and full supervision of all production stages (cutting, bending, forming, welding, assembly, and painting).</p><p>Developing daily and monthly production plans and following up on their implementation to ensure projects are delivered on time.</p><p>Managing and directing all work teams (line engineers, supervisors, and technicians) and identifying their training needs.</p><p>Monitoring the application of Quality Assurance/Quality Control (QA/QC) standards and Occupational Health and Safety (OHS) within all factory departments.</p><p>Reducing scrap and downtime and optimizing raw material consumption.</p><p>Coordinating with planning, maintenance, and procurement departments to ensure material flow and equipment availability.</p><p>Preparing periodic reports on production performance, costs, and analyzing plan deviations with senior management.</p><p> </p><p> </p><p>Requirements and Conditions:</p><p>Higher qualification: Bachelor's degree in Engineering (Mechanical / Production / Production and Metallurgy).</p><p>Minimum of [e.g., 8 - 12] years of experience in the field of iron industries and steel fabrication/structures, including at least [3-5] years in a leadership position.</p><p>Comprehensive knowledge of welding technology, cutting, and shaping of sheet metal and iron sections.</p><p>Proficiency in reading and understanding comprehensive engineering plans and drawings.</p><p>Strong leadership personality and excellent problem-solving and crisis management skills.</p><p> </p><p> </p>
SECTION I: Job Summary <br><br>The QC Inspector - Mechanical performs inspection and testing of mechanical equipment installation activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on mechanical equipment installation works (pumps, vessels, packages, structural skids) Verify equipment installation, alignment, and grouting against approved drawings and vendor specifications Witness mechanical running tests, alignment checks, and equipment box-up activities per the ITP Verify materials and equipment against material certificates, vendor data, and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for mechanical works Ensure work fronts comply with approved method statements and mechanical equipment standards Support preparation of quality documentation for mechanical handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Mechanical Equipment Inspection Techniques Reading Mechanical/Equipment Drawings & Vendor Data Equipment Alignment & Grouting Inspection Inspection & Test Plans (ITPs) Measuring & Alignment Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on mechanical equipment installation projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical Engineering QC/inspection certification preferred
Verification of materials, mill test certificates and confirming compliance to the code & company requirements during IMIR clearance.<br><br><ul><li>Conducting welding procedure qualification tests and maintaining procedure qualification records (PQR) for Structural, Tank & Piping works.</li><li>Preparation of Welding Procedure Specification & conducting Procedure Qualification test at site per requirement.</li><li>Verification of welding consumables BTCs & conduct necessary Qualification test at site.</li><li>Preparation of Job procedure & ITP pertaining to Structural, Piping & Tank works</li><li>Periodical Site Internal Audits.</li><li>Visually inspecting the fit up & welded joints of Structural, Tank & Piping works.</li><li>Welding inspection (surveillance checks before ,during and after welding)</li><li>Conducting all NDT inspections and preparation of all inspection records.</li><li>Coordination with Customer for necessary day-to-day inspections.</li><li>Piping test package preparation, review, and site verification and punching the pending activities.</li><li>NDT Clearance of Piping Test packs</li><li>Hydrotest witness of Tank & Piping system.</li></ul>
<h2 style="text-align: right;"><span lang="ar" dir="rtl">إعلان شركة أكوا باور عن وظائف شاغرة لحملة الدبلوم فأعلى</span></h2><p style="text-align: right;"><span lang="ar" dir="rtl">تعلن شركة أكوا باور، إحدى الشركات السعودية الكبرى العاملة في مجال الطاقة وتحلية المياه، عن توفر فرص وظيفية شاغرة لحملة الدبلوم والبكالوريوس في مختلف التخصصات، للعمل في عدد من مدن المملكة العربية السعودية، وذلك وفقًا للمسميات الوظيفية التالية:</span></p><h3 style="text-align: right;"><span lang="ar" dir="rtl">المسميات الوظيفية:</span></h3><ul><li><p style="text-align: right;"><span lang="ar" dir="rtl">مهندس الصحة والسلامة والبيئة (HSE Engineer).</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">فني ميكانيكي (Mechanical Technician).</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">مشغل غرفة التحكم المركزية (Central Control Room Operator).</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">مراقب وثائق (Document Controller).</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">أمين مستودع (Storekeeper / Store Keeper).</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">مسؤول الصحة والسلامة والبيئة (HSSE Officer).</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">مسؤول الوردية (Shift in Charge).</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">مشغل غرفة التحكم (Control Room Operator).</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">مدير العمليات (Operation Manager).</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">المدير الفني (Technical Manager).</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">مشغل نظام الإسكادا (SCADA Operator).</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">مشغل ميداني (Field Operator).</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">فني كهرباء (Electrical Technician).</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">قائد فريق الصحة والسلامة والبيئة (HSE Lead).</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">وظائف أخرى متنوعة.</span></p></li></ul><h3 style="text-align: right;"><span lang="ar" dir="rtl">التخصصات المطلوبة:</span></h3><ul><li><p style="text-align: right;"><span lang="ar" dir="rtl">إدارة الأعمال.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">الإدارة.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">إدارة المشاريع.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">إدارة العمليات.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">إدارة سلاسل الإمداد.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">السكرتارية التنفيذية.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">إدارة المستندات.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">إدارة المستودعات.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">الخدمات اللوجستية.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">الميكانيكا.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">تقنية التحكم.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">التشغيل الصناعي.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">الصحة والسلامة.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">تقنية المعلومات.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">الهندسة الكهربائية.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">الهندسة الميكانيكية.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">الهندسة.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">التخصصات ذات الصلة.</span></p></li></ul><h3 style="text-align: right;"><span lang="ar" dir="rtl">أماكن العمل:</span></h3><ul><li><p style="text-align: right;"><span lang="ar" dir="rtl">الرياض.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">جدة.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">حائل.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">رابغ.</span></p></li></ul><h3 style="text-align: right;"><span lang="ar" dir="rtl">نبذة عن الشركة:</span></h3><p style="text-align: right;"><span lang="ar" dir="rtl">أكوا باور (Acwa Power) شركة سعودية كبرى تأسست عام 2004، وتعمل في مجال توليد الطاقة وتحلية المياه، وتمتلك خبرة واسعة في مشروعات الطاقة، بما في ذلك الطاقة الشمسية الكهروضوئية والطاقة الشمسية المركزة والطاقة الحرارية الأرضية.</span></p><p style="text-align: right;"><span lang="ar" dir="rtl">تضم محفظة أعمال الشركة محطات قيد التشغيل والإنشاء أو في مراحل متقدمة من التطوير، كما تعمل في عدد من دول الشرق الأوسط وشمال وجنوب أفريقيا وجنوب شرق آسيا. ويعمل لديها آلاف الموظفين، وتُعد من الشركات البارزة في قطاع الطاقة وتحلية المياه.</span></p>
<h2 ><span lang="ar" dir="rtl">إعلان الشركة العالمية للصناعات البحرية عن وظائف في مختلف المجالات الإدارية والفنية والتقنية والهندسية</span></h2><h3 ><span lang="ar" dir="rtl">المسميات الوظيفية:</span></h3><ul><li><p ><span lang="ar" dir="rtl">مفتش مراقبة الجودة الهيكلية</span></p></li><li><p ><span lang="ar" dir="rtl">مراقب التكاليف</span></p></li><li><p ><span lang="ar" dir="rtl">مفتش أول مراقبة الجودة الميكانيكية</span></p></li><li><p ><span lang="ar" dir="rtl">مفتش أول مراقبة جودة اللحام</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف قسم اللحام</span></p></li><li><p ><span lang="ar" dir="rtl">مسؤول الإنتاج</span></p></li><li><p ><span lang="ar" dir="rtl">منسق تصاريح العمل</span></p></li><li><p ><span lang="ar" dir="rtl">منسق المواد</span></p></li><li><p ><span lang="ar" dir="rtl">أخصائي عقود</span></p></li><li><p ><span lang="ar" dir="rtl">مهندس إنتاج</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف قسم الأنابيب</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف ورشة الهياكل</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف قسم الميكانيكا</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف قسم الكهرباء</span></p></li><li><p ><span lang="ar" dir="rtl">منسق أول تصريح عمل</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف التشغيل الميكانيكي</span></p></li><li><p ><span lang="ar" dir="rtl">مراقب إدارة الإنتاج</span></p></li><li><p ><span lang="ar" dir="rtl">مهندس إنتاج ميكانيكي</span></p></li><li><p ><span lang="ar" dir="rtl">مفتش أول مراقبة جودة الطلاء</span></p></li><li><p ><span lang="ar" dir="rtl">مدير خدمات الدعم</span></p></li><li><p ><span lang="ar" dir="rtl">مهندس تخطيط</span></p></li><li><p ><span lang="ar" dir="rtl">مهندس إنتاج</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف أول تجهيز الأعمال الإنشائية</span></p></li><li><p ><span lang="ar" dir="rtl">أخصائي فحص الأصول</span></p></li><li><p ><span lang="ar" dir="rtl">مهندس أنابيب الإنتاج</span></p></li><li><p ><span lang="ar" dir="rtl">أخصائي عمليات لوجستية</span></p></li><li><p ><span lang="ar" dir="rtl">محلل علاقات الموردين</span></p></li><li><p ><span lang="ar" dir="rtl">أخصائي فحص الأصول الكهربائية</span></p></li><li><p ><span lang="ar" dir="rtl">أخصائي فحص الأصول الميكانيكية</span></p></li><li><p ><span lang="ar" dir="rtl">(وظائف أخرى)</span></p></li></ul><h3 ><span lang="ar" dir="rtl">التخصصات المطلوبة:</span></h3><ul><li><p ><span lang="ar" dir="rtl">إدارة الأعمال</span></p></li><li><p ><span lang="ar" dir="rtl">إدارة العمليات</span></p></li><li><p ><span lang="ar" dir="rtl">إدارة سلاسل الإمداد</span></p></li><li><p ><span lang="ar" dir="rtl">الأمن</span></p></li><li><p ><span lang="ar" dir="rtl">هندسة الأمن</span></p></li><li><p ><span lang="ar" dir="rtl">الهندسة الميكانيكية</span></p></li><li><p ><span lang="ar" dir="rtl">الهندسة الكهربائية</span></p></li><li><p ><span lang="ar" dir="rtl">الهندسة</span></p></li><li><p ><span lang="ar" dir="rtl">(تخصصات أخرى)</span></p></li></ul><h3 ><span lang="ar" dir="rtl">الشروط:</span></h3><ul><li><p ><span lang="ar" dir="rtl">أن يكون المتقدم حاصل على المؤهلات والخبرات الموضحة في الوصف الوظيفي.</span></p></li><li><p ><span lang="ar" dir="rtl">إجادة اللغة الإنجليزية تحدثاً وكتابة.</span></p></li><li><p ><span lang="ar" dir="rtl">القدرة على العمل تحت الضغط وساعات إضافية (مع التعويض).</span></p></li></ul><h3 ><span lang="ar" dir="rtl">لمحة عن الشركة العالمية للصناعات البحرية:</span></h3><p ><span lang="ar" dir="rtl">الشركة العالمية للصناعات البحرية (IMI) مشروع مشترك بين أرامكو السعودية وشركة لامبريل بي إل سي والشركة الوطنية للنقل البحري وشركة هيونداي للصناعات الثقيلة المحدودة، يقدم المشروع واحداً من أكبر المجمعات البحرية المتكاملة الخدمات في العالم عند إكتمال مراحل التشغيل في عام 2022م، ويقع المجمع في رأس الخير قرب مدينة الجبيل الصناعية.</span></p>
<p>Pump Mechanical Technician required<br><br>Salary: From SAR 1,800 to 2,500 per month depending on experience<br>Benefits: Accommodation + transportation<br>Nationality: All nationalities<br><br>Key Responsibilities:<br><br>Monitor pump performance and report early on any potential malfunctions<br>Corrective repair and maintenance: dismantling, diagnosing, and repairing mechanical pump faults on-site (In-situ) or in the maintenance workshop<br>Replacing damaged parts such as: Bearings, Mechanical Seals, Gaskets, and Impellers<br>Installing new pumps and ensuring they are properly mounted<br>Performing precision Laser Shaft Alignment between the pump and the Motor to reduce vibrations and extend the equipment's lifespan<br>Documenting maintenance and repair work and spare parts used in the Computerized Maintenance Management System (CMMS)<br>Submitting periodic reports on the condition of the pumps to the direct supervisor<br>Implementing occupational health and safety procedures (Lockout/Tagout - LOTO system and Hot/Cold Work Permits)<br>Wearing Personal Protective Equipment (PPE) and maintaining a clean and safe work environment<br><br>Requirements and Qualifications:<br><br>Education: Technical diploma (mechanical, production, equipment maintenance) or an accredited professional certificate in the mechanical field<br>Experience: 2 to 5 years in pump and rotating equipment maintenance in industrial, petrochemical facilities, or water plants<br>Ability to read engineering drawings and P&ID diagrams and assemble parts accurately<br>Proficiency in precision measuring tools (Vernier Caliper, Dial Indicator, Micrometer)<br>Good knowledge of mechanical seal types and their installation methods<br><br>To apply: Send your CV via WhatsApp only: [05******** ]<br>Hiring: Pump Mechanical Technician<br><br>Salary: SAR 1,800 – 2,500 per month, based on experience<br>Benefits: Accommodation + transportation provided<br>Nationality: All nationalities welcome<br><br>Key Responsibilities:<br><br>Monitor pump performance and report potential faults early<br>Corrective maintenance: dismantle, diagnose and repair mechanical pump faults on site (in-situ) or in the workshop<br>Replace worn parts such as bearings, mechanical seals, gaskets and impellers<br>Install new pumps and ensure proper mounting<br>Perform precision laser shaft alignment between pump and motor to reduce vibration and extend equipment life<br>Document all maintenance, repairs and spare parts used in the CMMS<br>Submit periodic pump condition reports to the direct supervisor<br>Apply HSE procedures, including LOTO and Hot/Cold Work Permits<br>Wear PPE and maintain a clean, safe work area<br><br>Requirements & Qualifications:<br><br>Education: Technical diploma (mechanical, production, equipment maintenance) or an accredited vocational certificate in mechanical trades<br>Experience: 2–5 years in maintenance of pumps and rotating equipment in industrial, petrochemical facilities or water plants<br>Ability to read engineering drawings and P&IDs and assemble components accurately<br>Proficient with precision measuring tools (vernier caliper, dial indicator, micrometer)<br>Good knowledge of mechanical seal types and installation methods<br><br>To apply: Send your CV via WhatsApp or email: [05********]</p>
<h2 ><span lang="ar" dir="rtl">إعلان شركة أكوا باور عن طرح وظائف في مختلف التخصصات</span></h2><p ><span lang="ar" dir="rtl">تعلن شركة أكوا باور (شركة سعودية كبرى تعمل في مجال الطاقة وتحلية المياه) عن طرح عدد وظائف شاغرة لحملة الدبلوم والبكالوريوس في مختلف التخصصات للعمل في كل من (الرياض, جدة, القصيم, بيشة, أملج, قرية) على المسميات التالية:</span></p><ul><li><p ><span lang="ar" dir="rtl">فني ميكانيكا (Mechanical Technician)</span></p></li><li><p ><span lang="ar" dir="rtl">فني كهرباء (Electrical Technician)</span></p></li><li><p ><span lang="ar" dir="rtl">مدير عقود (Contract Manager)</span></p></li><li><p ><span lang="ar" dir="rtl">مسؤول وثائق (Document Controller)</span></p></li><li><p ><span lang="ar" dir="rtl">أمين مخزن (Storekeeper)</span></p></li><li><p ><span lang="ar" dir="rtl">مسؤول السلامة والصحة المهنية والبيئة (HSE Officer)</span></p></li><li><p ><span lang="ar" dir="rtl">منسق مشاريع (Project Coordinator)</span></p></li><li><p ><span lang="ar" dir="rtl">مشغل غرفة التحكم (Control Room Operator)</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف الموارد البشرية والشؤون الإدارية (HR & Admin Supervisor)</span></p></li><li><p ><span lang="ar" dir="rtl">مشغل ميداني (Field Operator)</span></p></li><li><p ><span lang="ar" dir="rtl">مدير فني (Technical Manager)</span></p></li><li><p ><span lang="ar" dir="rtl">كيميائي (Chemist)</span></p></li><li><p ><span lang="ar" dir="rtl">مشغل غرفة التحكم المركزية (CCR Operator)</span></p></li><li><p ><span lang="ar" dir="rtl">مدير محطة معالجة الصرف الصحي (Manager STP Solid Waste)</span></p></li><li><p ><span lang="ar" dir="rtl">(وظائف أخرى).</span></p></li></ul><h3 ><span lang="ar" dir="rtl">التخصصات المطلوبة:</span></h3><ul><li><p ><span lang="ar" dir="rtl">الإدارة العامة</span></p></li><li><p ><span lang="ar" dir="rtl">إدارة الأعمال</span></p></li><li><p ><span lang="ar" dir="rtl">الموارد البشرية</span></p></li><li><p ><span lang="ar" dir="rtl">السلامة والبيئة</span></p></li><li><p ><span lang="ar" dir="rtl">الكيمياء</span></p></li><li><p ><span lang="ar" dir="rtl">تقنية المعلومات</span></p></li><li><p ><span lang="ar" dir="rtl">الهندسة المدنية</span></p></li><li><p ><span lang="ar" dir="rtl">الهندسة البيئية</span></p></li><li><p ><span lang="ar" dir="rtl">الهندسة الكهربائية</span></p></li><li><p ><span lang="ar" dir="rtl">الهندسة الكيميائية</span></p></li><li><p ><span lang="ar" dir="rtl">الهندسة الميكانيكية</span></p></li><li><p ><span lang="ar" dir="rtl">الهندسة</span></p></li><li><p ><span lang="ar" dir="rtl">أو مايعادلهم</span></p></li></ul><h3 ><span lang="ar" dir="rtl">نبذة عن الشركة:</span></h3><p ><span lang="ar" dir="rtl">أكوا باور (Acwa Power) شركة سعودية كبرى تأسست في عام 2004م وتعمل في مجال تزويد الطاقة وتحلية المياه تزخر بسجلٍ حافلٍ من الإنجازات في مجال الطاقة بدءاً من الطاقة الشمسية (الكهروضوئية) والطاقة الشمسية المركّزة (CSP) والطاقة الحرارية الأرضية، تشمل محفظة أعمالها حالياً 64 محطة قيد التشغيل والبناء أو في مراحل متقدمة من التطوير، ويعمل لدى الشركة نحو 3,500 موظف ما يشكل 60% من التوظيف المحلي في 12 دولة في مناطق الشرق الأوسط وشمال وجنوب أفريقيا وجنوب شرق آسيا، في 4 يونيو 2018، أعلن كل من صندوق الاستثمارات العامة السعودي، وشركة أعمال المياه والطاقة الدولية "أكوا باور"، عن استحواذ الصندوق على حصة مهمة في شركة "أكوا باور"، ليصبح مساهماً مباشراً في شركة "أكوا باور" بنسبة 15.2٪. وفي 19 نوفمبر 2020، أعلن صندوق الاستثمارات العامة عن زيادة حصته في "أكواباور" من 33.36% إلى 50%.</span></p>
<p>Tasks and Responsibilities:</p><p>Managing and supervising smelting, casting, and molding operations.</p><p>Production planning and tracking the achievement of production targets.</p><p>Supervising the operation and maintenance of equipment, furnaces, and production lines.</p><p>Monitoring product quality and reducing waste and loss.</p><p>Implementing Health, Safety, and Environment (HSE) standards.</p><p>Managing technical teams and developing employee efficiency.</p><p>Requirements:</p><p>Bachelor's degree in Mechanical Engineering, Materials Science, Metallurgy, or a related field.</p><p>Total experience of at least 8 years in the industrial sector.</p><p>At least 5 years of experience in managing and operating foundries and metal smelting and casting operations.</p><p>Technical knowledge of iron and aluminum smelting and casting processes and foundry systems.</p><p>Experience in production, maintenance, quality, and industrial safety management.</p><p>Strong leadership skills and the ability to manage work teams and solve operational problems.</p>
<br><p>An industrial facility specializing in metal forming and manufacturing announces its desire to hire an Operations Manager to manage and operate a factory specializing in melting, casting, and molding iron and aluminum.</p><p><br></p><p>Duties and Responsibilities:</p><p><br></p><p>Managing and supervising melting, casting, and molding operations.</p><p>Planning production and monitoring the achievement of production targets.</p><p>Supervising the operation and maintenance of equipment, furnaces, and production lines.</p><p>Monitoring product quality and reducing waste and loss.</p><p>Implementing Health, Safety, and Environment (HSE) standards.</p><p>Managing technical teams and developing employee efficiency.</p><p>Requirements:</p><p>Bachelor's degree in Mechanical Engineering, Materials Engineering, Metallurgy, or a related field.</p><p>A minimum of 8 years of total experience in the industrial sector.</p><p>A minimum of 5 years of experience in managing and operating foundries and metal melting and casting operations.</p><p>Technical knowledge of iron and aluminum melting and casting processes and foundry systems.</p><p>Experience in production management, maintenance, quality, and industrial safety.</p><p>High leadership skills and the ability to manage work teams and solve operational problems.</p><p>How to apply: Please send your CV with (Operations Manager – Foundries) written in the email subject line.</p><p><br></p><p><br></p>
<h3>Job Overview</h3><p>Buna Aljazira for Contracting Co is looking for a Mechanical Engineer to join our Technical Office team in Makkah. This is a full-time role that requires over 10 years of experience in the field. The engineer will work within a specialized team to design and implement engineering solutions that meet client needs.</p><h3>Key Duties and Responsibilities</h3><ul><li>Design and analyze mechanical systems using engineering design software such as AutoCAD and SolidWorks.</li><li>Perform performance tests and technical analysis of mechanical devices to ensure their efficiency and reliability.</li><li>Provide technical support and advice to other teams, including production and maintenance teams.</li><li>Conduct engineering feasibility studies to evaluate proposed solutions and ensure compliance with client requirements.</li><li>Develop project documentation and technical reports to ensure all stages and results are documented.</li><li>Participate in strategic planning meetings to define the goals and future directions of engineering projects.</li><li>Train and mentor new employees in the field of mechanical engineering.</li><li>Collaborate with multidisciplinary teams to achieve common goals and meet client expectations.</li><li>Monitor project progress and provide updates to senior management.</li></ul><h3>Qualifications and Experience</h3><ul><li>Over 10 years of experience in the field of mechanical engineering.</li><li>Proficiency in using engineering design software such as AutoCAD and SolidWorks.</li><li>Ability to analyze mechanical systems and conduct performance tests.</li><li>Strong skills in preparing technical reports and project documentation.</li></ul><h3>Work Environment</h3><p>You will work within a dynamic team in a technical office, where the focus is on collaboration and the exchange of ideas. The company provides opportunities for continuous training and knowledge expansion through participation in diverse projects.</p><h3>Location and Employment Type</h3><ul><li>Location: Makkah.</li><li>Employment Type: Full-time.</li></ul><h3>Application</h3><p>We invite ambitious engineers who seek to achieve excellence to apply for this opportunity.</p>
<p>8-12 years of experience for Cost Controller experience for Shutdown / turnaround as Contractor experience specifically in SD/TA with Mechanical Engineer Degree holder and verify his experience letter as per CV PRIMAVERA EXPERIENCE Job requirements Experience: Min. 8 years of experience Certificate: Primavera Shutdown/Turnaround experience is mandatory.</p><p><strong>Desired Candidate Profile</strong></p><p>Mechanical Engineer Degree holder and verify his experience letter as per CV PRIMAVERA EXPERIENCE Shutdown/Turnaround experience is mandatory.</p>
<p>Testing & Commissioning Manager (Wind Turbine Specialist) Position Overview This position is responsible for the planning, execution, coordination, and technical assurance of commissioning activities for Wind Turbine Generators (WTGs) in utility-scale wind power projects. The role ensures that mechanical, electrical, control, protection and grid-interface systems of WTGs are commissioned safely, operate reliably, and fully comply with OEM requirements, statutory regulations, and grid codes prior to handover.</p><p>Detailed Core Responsibilities</p><p>A. Engineering & Pre-Commissioning Planning</p><ul><li>Review and provide inputs to engineering team to take care of engineering itself based on experience.</li><li>Grid compliance and WTG controller limits</li><li>Machine specific challenges faced if any</li><li>Participate in FAT review of WTG control and protection systems (where applicable).</li><li>Develop WTG commissioning procedures, method statements, and risk assessments.</li><li>Coordinate commissioning sequence planning with EPC, OEM, and grid operator.</li></ul><p>B. Mechanical & Electrical Commissioning Coordination</p><ul><li>Supervise and verify correct completion of:</li><li>Mechanical erection, torquing, alignment, and lubrication</li><li>Electrical installation LV, MV, transformers, grounding systems</li><li>Ensure readiness of auxiliary systems:</li><li>Pitch and yaw drives</li><li>Hydraulic and lubrication systems</li><li>Emergency and service power supplies</li></ul><p>C. Electrical Energization</p><ul><li>Lead pre-energization checks including:</li><li>Insulation resistance tests</li><li>Grounding continuity</li><li>Sensitivity: L&T Construction Internal Use</li><li>Phase sequence and voltage checks</li><li>Coordinate transformer energization and LV/MV energization.</li><li>Execute first grid synchronization and progressive power ramp-up.</li><li>Ensure safety compliance during live tests and rotating machinery operation.</li></ul><p>D. Control, Protection & Grid Compliance</p><ul><li>Validate WTG controller parameters as per grid code and PPC philosophy.</li><li>Coordinate LVRT / HVRT, frequency ride-through, and reactive capability tests.</li><li>Verify pitch-based power regulation and ramp-rate control.</li><li>Confirm correct response to curtailment, trip, and fault conditions.</li></ul><p>E. Trial Operation & Handover</p><ul><li>Support trial run, availability tests, and performance acceptance.</li><li>Review SCADA data, alarms, and event logs.</li><li>Close commissioning punch points and support COD documentation.</li><li>Conduct knowledge transfer and basic training for O&M teams.</li></ul><p>Testing, Commissioning & Troubleshooting</p><p>Responsible for commissioning and grid-compliance testing of wind turbine generators as per IEC 61400-1, IEC 61400-21-1, IEC 61400-25, IEC 61400-27-1, IEC 60204-1, UL 6141 and any other relevant standards</p><p>Key Commissioning Tests</p><ul><li>Insulation & dielectric testing of generators and transformers</li><li>Protection relay testing (OV/UV, OF/UF, differential, earth fault)</li><li>Functional testing of:</li><li>Pitch, yaw, mechanical brake</li><li>Emergency stops and fail-safe systems</li><li>Power curve and performance checks</li><li>Communication tests with plant SCADA and PPC</li></ul><p>Key Troubleshooting Scope</p><ul><li>Grid-related trips (voltage/frequency instability)</li><li>Pitch or yaw control faults</li><li>Excessive vibration or temperature alarms</li><li>Transformer or converter faults</li><li>Communication failures between WTG and PPC</li></ul><p>Key Competencies & Skills</p><ul><li>Strong understanding of WTG electrical & control systems.</li><li>Familiarity with IEC 61400 series and grid code requirements.</li><li>Ability to analyze turbine event logs and operational trends.</li><li>Experience coordinating multi-disciplinary OEM teams.</li><li>High safety awareness for rotating equipment and work at height.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum Qualifications Bachelor s Degree Electrical / Mechanical Engineering.</li><li>12 15 years of WTG commissioning experience.</li><li>OEM commissioning authorization strongly preferred.</li><li>Certified Engineer.</li></ul>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><strong><span>Testing & Commissioning Manager – (Wind Turbine Specialist)</span></strong></p><br><p><strong><span>Position Overview</span></strong></p><br><p><span>This position is responsible for the planning, execution, coordination, and technical</span></p><br><p><span>assurance of commissioning activities for Wind Turbine Generators (WTGs) in utility-scale</span></p><br><p><span>wind power projects. The role ensures that mechanical, electrical, control, protection and grid-interface systems</span></p><br><p><span>of WTGs are commissioned safely, operate reliably, and fully comply with OEM</span></p><br><p><span>requirements, statutory regulations, and grid codes prior to handover.</span></p><br><p><strong><span>Detailed Core Responsibilities</span></strong></p><br><p><span>A. Engineering & Pre-Commissioning Planning</span></p><br><ul><li><span>Review and provide inputs to engineering team to take care of engineering itself</span></li><li><span>based on experience.</span></li><li><span>Grid compliance and WTG controller limits</span></li><li><span>Machine specific challenges faced if any</span></li><li><span>Participate in FAT review of WTG control and protection systems (where</span></li><li><span>applicable).</span></li><li><span>Develop WTG commissioning procedures, method statements, and risk assessments.</span></li><li><span>Coordinate commissioning sequence planning with EPC, OEM, and grid operator.</span></li></ul><p><span>B. Mechanical & Electrical Commissioning Coordination</span></p><br><ul><li><span>Supervise and verify correct completion of:</span></li><li><span>Mechanical erection, torquing, alignment, and lubrication</span></li><li><span>Electrical installation – LV, MV, transformers, grounding systems</span></li><li><span>Ensure readiness of auxiliary systems:</span></li><li><span>Pitch and yaw drives</span></li><li><span>Hydraulic and lubrication systems</span></li><li><span>Emergency and service power supplies</span></li></ul><p><span>C. Electrical Energization</span></p><br><ul><li><span>Lead pre-energization checks including:</span></li><li><span>Insulation resistance tests</span></li><li><span>Grounding continuity</span></li><li><span>Sensitivity: L&T Construction Internal Use</span></li><li><span>Phase sequence and voltage checks</span></li><li><span>Coordinate transformer energization and LV/MV energization.</span></li><li><span>Execute first grid synchronization and progressive power ramp-up.</span></li><li><span>Ensure safety compliance during live tests and rotating machinery operation.</span></li></ul><p><span>D. Control, Protection & Grid Compliance</span></p><br><ul><li><span>Validate WTG controller parameters as per grid code and PPC philosophy.</span></li><li><span>Coordinate LVRT / HVRT, frequency ride-through, and reactive capability tests.</span></li><li><span>Verify pitch-based power regulation and ramp-rate control.</span></li><li><span>Confirm correct response to curtailment, trip, and fault conditions.</span></li></ul><p><span>E. Trial Operation & Handover</span></p><br><ul><li><span>Support trial run, availability tests, and performance acceptance.</span></li><li><span>Review SCADA data, alarms, and event logs.</span></li><li><span>Close commissioning punch points and support COD documentation.</span></li><li><span>Conduct knowledge transfer and basic training for O&M teams.</span></li><li><span>Testing, Commissioning & Troubleshooting</span></li><li><span>Responsible for commissioning and grid-compliance testing of wind turbine generators as</span></li><li><span>per IEC 61400-1, IEC 61400-21-1, IEC 61400-25, IEC 61400-27-1, IEC 60204-1, UL 6141</span></li><li><span>and any other relevant standards</span></li></ul><p><span>Key Commissioning Tests</span></p><br><ul><li><span>Insulation & dielectric testing of generators and transformers</span></li><li><span>Protection relay testing (OV/UV, OF/UF, differential, earth fault)</span></li><li><span>Functional testing of:</span></li><li><span>Pitch, yaw, mechanical brake</span></li><li><span>Emergency stops and fail-safe systems</span></li><li><span>Power curve and performance checks</span></li><li><span>Communication tests with plant SCADA and PPC</span></li></ul><p><span>Key Troubleshooting Scope</span></p><br><ul><li><span>Grid-related trips (voltage/frequency instability)</span></li><li><span>Pitch or yaw control faults</span></li><li><span>Excessive vibration or temperature alarms</span></li><li><span>Transformer or converter faults</span></li><li><span>Communication failures between WTG and PPC</span></li></ul><p><span>Key Competencies & Skills</span></p><br><ul><li><span>Strong understanding of WTG electrical & control systems.</span></li><li><span>Familiarity with IEC 61400 series and grid code requirements.</span></li><li><span>Ability to analyze turbine event logs and operational trends.</span></li><li><span>Experience coordinating multi-disciplinary OEM teams.</span></li><li><span>High safety awareness for rotating equipment and work at height.</span></li></ul><p><strong><span>Minimum Qualifications</span></strong></p><br><ul><li><span>Bachelor’s Degree – Electrical / Mechanical Engineering.</span></li><li><span>12–15 years of WTG commissioning experience.</span></li><li><span>OEM commissioning authorization strongly preferred.</span></li><li><span>Certified Engineer.</span></li></ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5">
Preferred candidate </h2>
<div class="row is-m v-align-top t-small bg-mute">
<div class="col is-3 p5" data-automation-id="label_Years_of_experience">
<b>Years of experience</b>
</div>
<div class="col is-9 p5" data-automation-id="data_Years_of_experience">
No experience required </div>
</div>
<div class="row is-m v-align-top t-small ">
<div class="col is-3 p5" data-automation-id="label_Degree">
<b>Degree</b>
</div>
<div class="col is-9 p5" data-automation-id="data_Degree">
Bachelor's degree / higher diploma </div>
</div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Job Description <br></p><br><p>8-12 years of experience for Cost Controller experience for Shutdown / turnaround as Contractor experience specifically in SD/TA with Mechanical Engineer Degree holder and verify his experience letter as per CV PRIMAVERA EXPERIENCE</p><br><br><br>Requirements <br><p>Experience: Min. 8 years of experience<br>Certificate: Primavera<br>Shutdown/Turnaround experience is mandatory.</p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5">
Preferred candidate </h2>
<div class="row is-m v-align-top t-small bg-mute">
<div class="col is-3 p5" data-automation-id="label_Years_of_experience">
<b>Years of experience</b>
</div>
<div class="col is-9 p5" data-automation-id="data_Years_of_experience">
No experience required </div>
</div>
<div class="row is-m v-align-top t-small ">
<div class="col is-3 p5" data-automation-id="label_Degree">
<b>Degree</b>
</div>
<div class="col is-9 p5" data-automation-id="data_Degree">
Bachelor's degree / higher diploma </div>
</div>
<p>To control and manage personnel and resources pertinent to AGF Mechanical Trade activities in support of the RSAF Operational Flying Squadrons. To assist in the co-ordination and generation of aircraft to maximise the Operational Ready Rates in accordance with the RSAF Regulatory Framework Responsibilities: Allocating manpower to maintenance activities; Allocating manpower for flight line duties; Allocating manpower for EOR and Hit Team duties; Demanding aircraft spares; Raising TPRFs against approved data; Raising TQs for any aircraft related anomalies; Carry out PMDS downloads and assess arisings including SHM and EHM analysis as required; Completing PIP for his assigned manpower and identifying and training requirements; Liaise with the Mechanical Supt to ensure all engineering authorisations are up to date; Carrying out thorough shift handovers; Ensure tool control procedures are carried out; Ensure adherence to approved data; Ensure good husbandry practices are observed and maintained; Support the QA and higher HQ reporting process; Identifying and implementing continuous Improvement that will support operations; Support aircrew debriefs as required or in the absence of the Mechanical Supt; Provide assistance to the technicians in troubleshooting/fault finding as necessary; Carry out required Supervisory inspections and checks as and when required by the approved data; Confirm job completion to the shift lead / Rectification Controller; Review any changes to the approved data that impacts upon his trade (data modules, TyIMPs, TTPs etc); Ensure all manhours are accurately recorded either on ESS for aircraft maintenance or in a local log for non-ESS assigned tasks; Monitoring DLF stock availability and identifying any potential shortfalls or issues with stock holdings; Welfare and discipline of all assigned staff under his control in conjunction with other Management and Supervisory staff.</p><p><strong>Desired Candidate Profile</strong></p><p>(Saudi National Only) Grade: 07 Location: Taif Working hours: full time ROLE OBJECTIVE & OUTLINE RESPONSIBILITY: To control and manage personnel and resources pertinent to AGF Mechanical Trade activities in support of the RSAF Operational Flying Squadrons. To assist in the co-ordination and generation of aircraft to maximise the Operational Ready Rates in accordance with the RSAF Regulatory Framework Responsibilities: Allocating manpower to maintenance activities; Allocating manpower for flight line duties; Allocating manpower for EOR and Hit Team duties; Demanding aircraft spares; Raising TPRFs against approved data; Raising TQs for any aircraft related anomalies; Carry out PMDS downloads and assess arisings including SHM and EHM analysis as required; Completing PIP for his assigned manpower and identifying and training requirements; Liaise with the Mechanical Supt to ensure all engineering authorisations are up to date; Carrying out thorough shift handovers; Ensure tool control procedures are carried out; Ensure adherence to approved data; Ensure good husbandry practices are observed and maintained; Support the QA and higher HQ reporting process; Identifying and implementing continuous Improvement that will support operations; Support aircrew debriefs as required or in the absence of the Mechanical Supt; Provide assistance to the technicians in troubleshooting/fault finding as necessary; Carry out required Supervisory inspections and checks as and when required by the approved data; Confirm job completion to the shift lead / Rectification Controller; Review any changes to the approved data that impacts upon his trade (data modules, TyIMPs, TTPs etc); Ensure all manhours are accurately recorded either on ESS for aircraft maintenance or in a local log for non-ESS assigned tasks; Monitoring DLF stock availability and identifying any potential shortfalls or issues with stock holdings; Welfare and discipline of all assigned staff under his control in conjunction with other Management and Supervisory staff. Job Requirements: Essential Must be educated to HNC level or recognised equivalent or have relevant experience supported by formal, recorded workplace applied related training. Must have completed a recognised aircraft engineering apprenticeship in industry/military or similar qualification in aircraft systems. Must have previous Typhoon Mechanical Systems experience with a formal Q annotation. Must have 3 years post qualification experience of military fast jet maintenance support, at Supervisor level within an operational military flying environment and proven ability to manage all levels of engineering personnel. Good level of interpersonal skill to co-ordinate a number of activities and the ability to communicate, influence and direct decision making. Good understanding of company processes and procedures and industry knowledge. Fluent in English Desirable An understanding of engineering operating procedures. Proven Managerial experience within the aerospace industry preferably gained on 3rd and/or 4th Generation military aircraft at Supervisor level or equivalent. Experience of working in the aviation industry in a Gulf Coast Country preferred. The ability to act upon his own initiative within the scope of his job. A conscientious approach to work and meticulous attention to detail. A track record of meeting strict deadlines without compromising standards and quality. An understanding of ESS or similar electronic based reporting system SAUDI NATIONAL EMPLOYEE BENEFITS In return for the required high levels of commitment and hard work you will receive a competitive salary and benefits package, including a generous leave and leave allowance, a full health care scheme and access to discounted gym membership.</p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><b>Position: Elevator Troubleshooting Technician</b></p><p><b>Location:</b> Saudi Arabia</p><p>We are looking for an experienced <b>Elevator Troubleshooting Technician</b> with a minimum of <b>5 years of hands-on elevator experience</b>.</p><p>The ideal candidate must be highly skilled in independently in fault<b> finding, troubleshooting, breakdown repairs, and diagnosing electrical and mechanical problems</b> in elevators. The candidate should be capable of attending breakdowns independently, identifying the root cause of faults, and carrying out repairs safely and efficiently.</p><p>He will be attending any call-backs after duty hours</p><p>working hours: 8am - 5pm</p><p><b>Key Responsibilities:</b></p><ul><li>Diagnose and troubleshoot elevator electrical, electronic, and mechanical faults.</li><li>Attend elevator breakdowns and identify the root cause of failures.</li><li>Troubleshoot controllers, drives/VFDs, door systems, safety circuits, sensors, relays, contactors, and other elevator components.</li><li>Read and understand electrical wiring diagrams and control circuits.</li><li>Carry out preventive and corrective maintenance.</li><li>Perform testing, adjustments, repairs, and replacement of faulty components.</li><li>Identify recurring faults and recommend permanent solutions.</li><li>Respond to emergency breakdown calls when required.</li><li>Ensure elevators are operating safely and reliably after repairs.</li><li>Follow all company safety procedures and applicable elevator safety standards.</li><li>Maintain proper service and maintenance records.</li><li>Work independently and provide technical support to junior technicians when required.</li></ul><p><b>Experience Required:</b></p><ul><li>Minimum <b>5 years of hands-on elevator experience</b>.</li><li>Strong experience in <b>elevator troubleshooting and breakdown maintenance</b>.</li><li>Must be capable of independently diagnosing electrical and mechanical faults.</li><li>Experience with different elevator brands/controllers is highly preferred.</li><li>GCC experience is preferred.</li><li>ITI/Diploma in Electrical, Electronics, Mechanical, or a related technical field is preferred.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2>
<div data-jb-field="skills"><p>Advanced elevator troubleshooting and fault finding</p><p>Electrical fault diagnosis</p><p>Mechanical fault diagnosis</p><p>Elevator controller troubleshooting</p><p>VFD/drive troubleshooting</p><p>Door operator and door-lock troubleshooting</p><p>Safety circuit troubleshooting</p><p>Reading electrical wiring diagrams</p><p>Elevator breakdown repair</p><p>Preventive and corrective maintenance</p><p>Relay, contactor and sensor fault diagnosis</p><p>Ability to diagnose faults independently</p><p>Knowledge of elevator safety systems</p><p>Experience with multiple elevator brands/controllers</p><p>Strong problem-solving skills</p><p>Ability to work under pressure during breakdowns</p><p><br></p></div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring for the position of <b>BMS Supervisor</b> in <b>Saudi Arabia</b>. We are seeking skilled, motivated professionals with strong knowledge of building management systems, equipment monitoring, fault diagnosis, preventive maintenance, and team supervision. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Supervise daily operation and monitoring of Building Management System equipment and interfaces.<br></li><li>Monitor HVAC, electrical, mechanical, fire alarm, and other integrated building systems through the BMS platform.<br></li><li>Review system alarms, identify abnormalities, and coordinate corrective actions with maintenance teams.<br></li><li>Troubleshoot BMS controllers, field devices, sensors, actuators, communication networks, and related control equipment.<br></li><li>Coordinate preventive and corrective maintenance activities for BMS-connected systems.<br></li><li>Maintain system logs, alarm records, maintenance reports, and equipment performance documentation.<br></li><li>Supervise technicians and ensure maintenance activities follow approved procedures and safety requirements.<br></li><li>Coordinate with facilities, HVAC, electrical, and mechanical teams to maintain reliable building operations.<br></li></ul>Required Skills<br><ol><li><b>Building Management Systems:</b> Practical knowledge of BMS operation, monitoring, and control functions.<br></li><li><b>HVAC Controls:</b> Ability to understand AHU, FCU, chilled-water, temperature, pressure, and ventilation control sequences.<br></li><li><b>BMS Troubleshooting:</b> Ability to diagnose controller, sensor, actuator, and communication faults.<br></li><li><b>Alarm Management:</b> Experience reviewing alarms, determining causes, and coordinating corrective action.<br></li><li><b>Supervision:</b> Ability to allocate work, monitor technicians, and ensure maintenance tasks are completed correctly.<br></li></ol>Preferred Skills<br><ul><li>Knowledge of BACnet, Modbus, or similar building automation communication protocols.<br></li><li>Familiarity with preventive maintenance and facilities-management procedures.<br></li><li>Experience preparing BMS operational and maintenance reports.<br></li></ul>Work Experience Requirements<br><p>The posting does not specify an experience requirement. <b>Typical for this role:</b> approximately <b>4–7 years of relevant BMS/building automation or facilities-maintenance experience</b>, including supervisory exposure. Experience with commercial, industrial, infrastructure, hospital, hotel, or large facilities environments is typically beneficial.<br></p><br>Education<br><ul><li><b>Minimum:</b> Typical — Diploma or Bachelor's degree in Electrical, Electronics, Instrumentation, Mechanical, HVAC, or a related engineering discipline.<br></li><li><b>Preferred:</b> Relevant building automation/BMS certification.<br></li><li><b>Additional:</b> OEM or controls-platform certification may be advantageous.<br></li></ul>Contact Number - 9786888866 <br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5">
Preferred candidate </h2>
<div class="row is-m v-align-top t-small bg-mute">
<div class="col is-3 p5" data-automation-id="label_Years_of_experience">
<b>Years of experience</b>
</div>
<div class="col is-9 p5" data-automation-id="data_Years_of_experience">
No experience required </div>
</div>
<div class="row is-m v-align-top t-small ">
<div class="col is-3 p5" data-automation-id="label_Degree">
<b>Degree</b>
</div>
<div class="col is-9 p5" data-automation-id="data_Degree">
Bachelor's degree / higher diploma </div>
</div>
<h3><strong>About the Role</strong></h3><p>Samaco Motors is seeking a <strong>Technician / Mechanic</strong> to join their team in Al Khobar. This full-time role involves performing mechanical repair and maintenance work on customer vehicles. The primary objective is to ensure all work adheres to manufacturer standards, maintaining high levels of quality, accuracy, and timely completion to uphold customer satisfaction and brand standards.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Perform mechanical repairs as specified on job cards by the Workshop Controller or Service Advisor.</li><li>Accurately diagnose vehicle defects and apply factory-recommended repair methods.</li><li>Conduct final checks on completed repairs to ensure adherence to quality and safety standards.</li><li>Identify and request necessary spare parts for repairs, ensuring proper usage and reporting any shortages or incorrect supplies.</li><li>Execute diagnostic tests to identify mechanical or electrical faults within vehicles.</li><li>Inspect vehicles for additional or previously unidentified defects and report findings comprehensively.</li><li>Adhere strictly to technical instructions and factory literature provided by the Technical Trainer or Manufacturer.</li><li>Complete assigned repairs efficiently and accurately within allocated time frames.</li><li>Ensure all repairs consistently meet the brand’s quality and safety requirements.</li><li>Follow workshop safety protocols and maintain a clean, organized work environment at all times.</li></ul><h3><strong>Experience Requirements</strong></h3><p>Candidates for this position should possess 0-1 years of relevant experience. The role requires a foundational understanding of vehicle mechanics and a commitment to learning and applying manufacturer standards.</p><h3><strong>Work Environment</strong></h3><p>This is a full-time position based in Al Khobar. The successful candidate will work within a workshop setting, collaborating with other technicians and service personnel to deliver high-quality vehicle maintenance and repair services.</p>
Receive email alerts for jobs
You can cancel your email alert at anytime