Embedded Systems Engineer Jobs - Al Damam Saudi

<p>&nbsp;</p><ul><li>We are looking for a qualified and proven experienced <strong>Electrical Engineer</strong> to operate feed mills. The successful candidate will be responsible for maintaining electrical systems, repairing faults, and developing them to ensure the feed mill operates safely and efficiently.</li><li><h3><strong>Main responsibilities:</strong></h3></li><li><strong>Maintenance:</strong> Perform preventive, predictive, and corrective maintenance on electrical equipment.</li><li><strong>Fault repair:</strong> Diagnose and repair electrical faults and minimize equipment downtime.</li><li><strong>System maintenance:</strong> Maintain and repair motors, Motor Control Centers (MCCs), Programmable Logic Controllers (PLCs), Variable Frequency Drives (VFDs), control panels, transformers, and power distribution systems.</li><li><strong>Performance monitoring:</strong> Monitor and improve the performance of feed mill machines and equipment.</li><li><strong>Safety compliance:</strong> Ensure compliance with electrical safety standards and company policies.</li><li><strong>Internal coordination:</strong> Coordinate with the maintenance and production teams to achieve defined production goals.</li><li><strong>Maintenance management:</strong> Prepare maintenance schedules and keep accurate records of all maintenance work.</li><li><strong>Supervision:</strong> Supervise electricians and contractors when needed.</li><li><strong>Installation and operation:</strong> Participate in the installation, operation, and testing of new equipment.</li><li><strong>Spare parts:</strong> Ensure availability of vital and necessary electrical spare parts.</li><li><strong>Fault analysis:</strong> Analyze repetitive equipment faults and apply root-cause and permanent solutions.</li><li><strong>Continuous development:</strong> Support continuous improvement initiatives to enhance plant efficiency and reliability.</li><li><h3><strong>Required qualifications:</strong></h3></li><li><strong>Educational qualification:</strong> Bachelor's degree in Electrical Engineering.</li><li><strong>Experience:</strong> 3 to 5 years of experience in <strong>feed mills</strong> (mandatory).</li><li><strong>Technical knowledge:</strong> Strong knowledge of equipment (PLCs, VFDs, MCCs, SCADA), motors, sensors, and industrial automation systems.</li><li><strong>Equipment experience:</strong> Experience handling feed mill equipment such as: hammer mills, pellet mills, mixers, conveying systems, bucket elevators (vertical and inclined), and packaging systems.</li><li><strong>Reading drawings:</strong> Ability to read and interpret electrical drawings and control schematics.</li><li><strong>Problem-solving:</strong> Excellent fault-finding and root-cause analysis skills.</li><li><strong>Software:</strong> Prefer proficiency in Microsoft Office and Computerized Maintenance Management Systems (CMMS).</li><li><strong>Soft skills:</strong> Excellent communication and teamwork skills.</li><li><strong>Work arrangement:</strong> Ability to work under pressure and in shifts if required.</li><li><h3><strong>Preferred skills:</strong></h3></li><li>Experience with automation systems from Siemens, Allen-Bradley, Schneider, or ABB.</li><li>Knowledge of energy management and power quality.</li><li>Strong analytical problem-solving abilities.</li><li>Familiarity with international electrical standards and safety regulations.</li><li><h3><strong>Job benefits:</strong></h3></li><li>Competitive salary.</li><li>Accommodation provided.</li><li>Transportation provided.</li><li>Health insurance.</li><li>Annual leave and air ticket according to Saudi labor law.</li><li>Opportunity to work with a leading company in the feed mills field.</li><li><blockquote><p><strong>Note:</strong> Applications will be considered only from candidates with relevant experience in <strong>feed mills</strong>.</p></blockquote></li></ul>

<h1>Environmental Engineer - Sales (Pest Control &amp; Public Health) Required</h1><h2>Job Title:</h2><p>Environmental Engineer – Sales</p><h2>Location:</h2><p>All regions of the Kingdom of Saudi Arabia</p><h2>Job Summary:</h2><p>We are looking for an environmental engineer with sales and business development experience in pest control, public health, and pest management, to contribute to expanding the customer base and achieving the company's sales goals in various regions of the Kingdom.</p><h2>Tasks and Responsibilities:</h2><ul><li><p>Marketing and selling pest control and pest management services to government and private sector clients.</p></li><li><p>Developing relationships with government agencies, municipalities, hospitals, and commercial and industrial establishments.</p></li><li><p>Preparing technical and commercial offers and participating in tenders and projects.</p></li><li><p>Conducting field visits and providing appropriate technical solutions to clients.</p></li><li><p>Achieving monthly and annual sales targets.</p></li><li><p>Following up with existing clients and attracting new clients.</p></li><li><p>Preparing periodic reports on sales and business development.</p></li></ul><h2>Required Qualifications:</h2><ul><li><p>Bachelor's degree in Environmental Engineering, Environmental Sciences, or a related field.</p></li><li><p>At least two years of experience in sales, pest control, or public health.</p></li><li><p>Good knowledge of the systems and requirements of relevant government agencies.</p></li><li><p>High skills in communication, negotiation, and presentation.</p></li><li><p>Proficiency in Microsoft Office programs.</p></li><li><p>Proficiency in English is an added advantage.</p></li></ul><h2>Basic Conditions:</h2><ul><li><p>Saudi nationality.</p></li><li><p>Valid driver's license.</p></li><li><p>Willingness to travel within the Kingdom.</p></li><li><p>Ability to work in the field and achieve sales targets.</p></li></ul><h2>Benefits:</h2><ul><li><p>Attractive basic salary.</p></li><li><p>Monthly commissions and bonuses.</p></li><li><p>Medical insurance.</p></li><li><p>Professional development and continuous training opportunities.</p></li><li><p>Possibility of working in any region of the Kingdom.</p></li></ul><p>To apply, please send your CV, mentioning the job title in the email subject.</p>

<p>Engineering office is looking for a safety engineer</p><p>5 years of experience or more for the purpose of issuing engineering office licenses</p>

<p>Overview</p><p>We are seeking an outstanding individual to join our team in a dynamic work environment in Dammam, to ensure the application of the highest professional safety standards and the protection of assets and human resources. This role aims to promote a culture of safety within the facility and ensure compliance with national regulations and international standards.</p><p>Key Responsibilities and Duties</p><ul><li>Monitor and implement security and safety policies throughout the site.</li><li>Conduct periodic inspection tours to ensure the work environment is free from hazards.</li><li>Verify the readiness of emergency equipment, alarm systems, and firefighting systems periodically.</li><li>Prepare periodic reports on safety incidents or security breaches and submit them to management.</li><li>Assist in the implementation of evacuation plans and field training related to safety.</li><li>Work on educating employees about the importance of using personal protective equipment correctly.</li></ul><p>Qualifications and Requirements</p><ul><li>High school diploma or equivalent.</li><li>Possession of training certificates in occupational health and safety is preferred.</li><li>Ability to work in a field environment and adhere to specified working hours.</li><li>Excellent communication skills in Arabic.</li></ul><p>Required Skills</p><ul><li>Strong attention to detail and ability to identify potential hazards.</li><li>High level of vigilance and responsibility in handling security procedures.</li><li>Ability to work within a team and cooperate with colleagues and other departments.</li><li>Willingness to learn and continuously develop in the field of occupational safety.</li></ul><p>Benefits and Perks</p><ul><li>A stimulating work environment that offers opportunities for professional growth.</li><li>Comprehensive medical insurance.</li><li>Competitive allowances in accordance with labor regulations in the Kingdom of Saudi Arabia.</li><li>Specialized training programs to enhance employee skills.</li><li>Possession of an accredited certificate&nbsp;</li></ul>

<p>&nbsp;</p><p>Required for a major engineering company in Al-Anoud district, Dammam, only Saudi male and female engineers, no other nationalities. An electrical engineer with 3 to 5 years of experience. If you find yourself meeting these specifications, please send your CV.</p>

<p>&nbsp;</p><p>We are hiring for a major engineering company in Al-Anoud neighborhood, Dammam. Saudis only, male and female engineers, no other nationalities. Civil engineer with 3 to 5 years of experience. If you meet these specifications, please send your CV.</p>

<h3 >About Perfect Vision and the Role</h3> <p >Perfect Vision is seeking an <strong >Embedded Systems Engineer</strong> to join our team in Dammam, Eastern region. This is a full-time position suitable for candidates with <strong >0-1 years of experience</strong> in embedded systems development. The successful candidate will be instrumental in designing and building the firmware for our telematics devices.</p> <h3 >Role Overview</h3> <p >As an Embedded Systems Engineer, you will develop robust and efficient firmware that powers our telematics devices. This firmware is critical for capturing and processing vehicle and asset data at the edge, and securely streaming it to our platform. The role involves working with constrained hardware, integrating various connectivity solutions and sensors, and ensuring reliable over-the-air update mechanisms that our fleet depends on.</p> <h3 >Key Responsibilities</h3> <ul > <li >Design, write, and maintain firmware in C/C++ for microcontrollers, operating on RTOS (FreeRTOS/Zephyr) or bare-metal environments.</li> <li >Develop and integrate device drivers and low-level interfaces, including UART, SPI, I2C, ADC, GPIO, and DMA.</li> <li >Implement vehicle-data acquisition protocols such as CAN, OBD-II, J1939, and Modbus.</li> <li >Build cellular connectivity and telemetry solutions using MQTT, TCP/IP, TLS, and potentially CoAP/HTTP.</li> <li >Design robust over-the-air (OTA) firmware update mechanisms, incorporating rollback capabilities and integrity checks.</li> <li >Optimize firmware for low power consumption, minimal memory footprint, and long-term field reliability.</li> <li >Collaborate with hardware engineers during board bring-up and with the platform team on device-to-cloud data contracts.</li> <li >Write unit and integration tests, perform debugging using JTAG/SWD, and support field diagnostics.</li> </ul> <h3 >Required Technical Expertise</h3> <p >Candidates should possess practical experience with:</p> <ul > <li >Firmware development in C/C++ for microcontrollers.</li> <li >Real-time operating systems (RTOS) like FreeRTOS or Zephyr, or bare-metal development.</li> <li >Low-level interface development (UART, SPI, I2C, ADC, GPIO, DMA).</li> <li >Vehicle communication protocols (CAN, OBD-II, J1939, Modbus).</li> <li >Network protocols and telemetry (MQTT, TCP/IP, TLS, CoAP/HTTP).</li> <li >Debugging tools such as JTAG/SWD.</li> </ul> <h3 >Qualifications and Experience</h3> <p >This role requires <strong >0-1 years of professional experience</strong> in embedded systems engineering or a related field. A foundational understanding of the principles of embedded software design and development is essential.</p> <h3 >Application Process</h3> <p >Interested candidates are invited to submit their application for consideration.</p>

<h3 >About SYSTRA Arabia</h3> <p >SYSTRA Arabia is seeking a <strong >Track Design Engineer</strong> to provide Project Management Consultancy (PMC) services for a significant client in Saudi Arabia. This role is integral to supporting major rail projects within the region.</p> <h3 >The Role of Track Design Engineer</h3> <p >The Track Design Engineer will focus on leading and assuring track alignment design for various rail projects. This involves aligning multidisciplinary interfaces and ensuring project delivery adheres to client standards and specifications.</p> <h3 >Key Responsibilities</h3> <ul > <li >Support the Engineering Lead in reviewing horizontal and vertical alignment design for mainline, depot, and yard tracks using industry-standard tools such as Bentley OpenRail, Civil 3D, and MX.</li> <li >Define and enforce geometric design criteria, alignment control parameters, and tolerances across all project phases, including concept, preliminary, and detailed design.</li> <li >Conduct design checks, optioneering, and value engineering for alignments, turnouts, crossovers, and transition curves to optimize performance, maintainability, and cost efficiency.</li> <li >Ensure compliance with international and regional rail standards and client-specific requirements, integrating RAMS, maintainability, and ride quality considerations into designs.</li> <li >Act as the integrated PMC representative to the client, coordinating multi-disciplinary interfaces across civil, structures, trackwork, OCS, signaling, drainage, and utilities.</li> <li >Manage technical queries, change requests, and design approvals, maintaining clear audit trails and configuration control throughout the project lifecycle.</li> <li >Lead design risk management for alignment choices, considering factors such as ground conditions, utilities, third-party constraints, and environmental impacts.</li> <li >Oversee contractor and designer performance on alignment deliverables, ensuring adherence to baseline schedules and quality standards.</li> <li >Maintain design schedules, registers, and progress reporting for all alignment-related works.</li> <li >Prepare and present technical reports, design review comments, and decision logs to client stakeholders.</li> <li >Ensure constructability and staging are embedded in alignment design, providing support to site teams during construction and responding to Requests for Information (RFIs).</li> <li >Implement robust quality assurance processes, including independent design reviews and verification/validation activities.</li> <li >Align deliverables with Kingdom of Saudi Arabia (KSA) authority requirements and applicable standards, supporting permitting and approvals processes.</li> <li >Engage with stakeholders, authorities, and third parties to resolve constraints, protect corridors, and secure necessary approvals.</li> </ul> <h3 >Required Experience and Skills</h3> <p >Candidates for this position should possess a solid design background in track engineering.</p> <ul > <li >A minimum of <strong >5 to 10 years of experience</strong> in track design.</li> <li >Proficiency in industry-standard design tools such as Bentley OpenRail, Civil 3D, or MX.</li> <li >Demonstrated ability to define and enforce geometric design criteria and alignment control parameters.</li> <li >Strong understanding of international and regional rail standards, including KSA authority requirements.</li> <li >Experience in coordinating multi-disciplinary interfaces and managing design risks.</li> <li >Ability to prepare technical reports and present findings to stakeholders.</li> </ul> <h3 >Location and Work Type</h3> <p >This is a <strong >full-time</strong> position based in <strong >Dammam, Eastern, Saudi Arabia</strong>.</p> <h3 >Application Process</h3> <p >Interested candidates are invited to submit their application for consideration.</p>

<h3 >The Design Engineer Role at Emerson</h3> <p >Emerson Al-Arabia for Manufacturing is seeking a <strong >Design Engineer</strong> to join its Isolation Valves business unit in Dammam, Eastern, Saudi Arabia. This full-time position is suitable for candidates with 0-1 years of experience and is central to providing engineering support for project and sales orders across valve and actuation product lines.</p> <h3 >Role Context and Scope</h3> <p >The Design Engineer holds end-to-end ownership of order engineering activities, ensuring solutions consistently meet customer, quality, and industry requirements. The role involves close collaboration with global engineering, manufacturing, sales, and operations teams, requiring a commitment to moving projects forward with urgency and accountability. Effective communication and the ability to build strong working relationships across diverse cultures and functions are essential.</p> <h3 >Key Responsibilities</h3> <ul > <li >Provide engineering support for customer orders, including the design, modification, and documentation of valve and actuation solutions.</li> <li >Develop and maintain engineering deliverables such as 3D models, integrated drawings, bills of materials, and technical documents using a 3D CAD environment.</li> <li >Interpret customer specifications, datasheets, and applicable international codes and standards to ensure compliant and optimized designs.</li> <li >Define automation and actuation philosophies for various valve applications, aligned with customer and project requirements.</li> <li >Support technical queries from sales, quotation, and order management teams throughout the project lifecycle.</li> <li >Collaborate with manufacturing, supply chain, and service teams to support production, procurement, and field activities.</li> <li >Prepare customer drawings, wiring diagrams, schematics, and manufacturing documentation for internal use and customer submission.</li> <li >Review and approve internal and supplier drawings, recommending improvements to enhance quality, efficiency, and cost-effectiveness.</li> <li >Maintain accurate engineering documentation, including revisions, change notices, and order updates, in line with quality systems.</li> <li >Contribute to continuous improvement by learning new products, applications, and engineering practices.</li> <li >Adhere to Health, Safety &amp; Environment policies as laid by the organization.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >A degree or equivalent qualification in Mechanical or Instrumentation Engineering.</li> <li >Experience (0-1 years) in product or order engineering within the valve, actuation, or industrial automation domain.</li> <li >Working knowledge of pneumatic and hydraulic applications.</li> <li >Experience using 3D CAD tools for engineering design and documentation.</li> <li >Understanding of engineering drawings, geometric tolerancing, and process documentation.</li> <li >Ability to communicate effectively in English in a professional engineering environment.</li> </ul> <h3 >Preferred Skills and Attributes</h3> <ul > <li >Product knowledge related to butterfly valves, ball valves, and actuator systems.</li> <li >Familiarity with international valve standards and manufacturing processes.</li> <li >Experience working with ERP systems and structured engineering workflows.</li> <li >Exposure to multi-regional or global engineering collaboration.</li> </ul> <h3 >Professional Development and Workplace Standards</h3> <p >The successful candidate will be committed to continuous learning, actively seeking feedback to improve, and developing both technical and professional capabilities. Adherence to all Health, Safety &amp; Environment policies is a fundamental requirement of this role within the organization.</p>

<h3 >About the Opportunity</h3> <p >AIQU is seeking an experienced <strong >Cyber Security Engineer</strong> to join a leading industrial project in Dammam, Eastern Province, Saudi Arabia. This contract role requires a professional with a strong background in Industrial Control Systems (ICS) and Operational Technology (OT) cybersecurity, bringing 5-10 years of relevant experience.</p> <h3 >Role Focus</h3> <p >The successful candidate will be instrumental in implementing and securing critical industrial infrastructure. This role focuses on ensuring robust cybersecurity measures across various project phases, from engineering to operational startup, specifically within OT environments.</p> <h3 >Key Responsibilities</h3> <ul > <li >Execute OT cybersecurity implementation throughout engineering, Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT), commissioning, and startup phases.</li> <li >Configure and secure industrial control systems to meet project specifications and security standards.</li> <li >Perform system hardening, ensure cybersecurity compliance, and maintain comprehensive documentation.</li> <li >Provide support for industrial network architecture and virtualization environments.</li> </ul> <h3 >Required Experience and Skills</h3> <ul > <li >Proven experience in Hardware/Software Commissioning.</li> <li >Demonstrated ability in Loop Checks, Factory Acceptance Testing (FAT), and Site Acceptance Testing (SAT).</li> <li >Proficiency in Configuration, Maintenance, and Troubleshooting of industrial systems.</li> <li >Experience with virtualization technologies, including VMware and Hyper-V.</li> <li >Strong understanding of Industrial Network Security, Firewalls, VLANs, and Network Segmentation.</li> <li >Expertise in Windows Server Hardening and Active Directory.</li> <li >Knowledge of IEC 62443 / Industrial Cybersecurity Standards is considered an advantage.</li> </ul> <h3 >Preferred System Experience</h3> <ul > <li >Experience with Emerson DeltaV is <strong >highly preferred</strong>.</li> <li >Experience with Honeywell Experion or ABB 800xA is also valued.</li> </ul> <h3 >Employment Details</h3> <p >This is a contract position based in Dammam, Eastern Province, Saudi Arabia. Candidates should possess 5-10 years of professional experience in the cyber security field, particularly within industrial and operational technology environments. Salary for this role will be discussed during the interview process.</p>

<h3 >About the Role</h3> <p >Akkodis is seeking an experienced <strong >DevOps Engineer</strong> to join our team in Dammam, KSA. This full-time role focuses on maintaining system reliability, designing and automating infrastructure using Infrastructure-as-Code (IaC) principles, and managing robust CI/CD pipelines with GitLab. The successful candidate will apply software engineering skills to build, maintain, support, and optimize mission-critical, cloud-native systems and applications for our On-Demand Connectivity (ODC) and eUICC IoT Manager (eIM) products, ensuring they are reliable, scalable, and performant.</p> <h3 >Key Responsibilities</h3> <ul > <li >Design, develop, and automate infrastructure utilizing Infrastructure-as-Code (IaC) principles.</li> <li >Maintain and enhance robust CI/CD pipelines using GitLab.</li> <li >Install, configure, and manage Kubernetes-based solutions on Google Cloud Platform (GCP).</li> <li >Take ownership of production systems, managing real-time system monitoring, observability, and incident response to meet strict SLA commitments.</li> <li >Act as a technical bridge between development, validation, and customer teams.</li> <li >Provide operational support through participation in <strong >24/7 onsite shifts</strong> and contribute to high-impact Change Advisory Board (CAB) reviews.</li> <li >Prepare technical documentation, customer acceptance plans, and operational readiness reviews to support continuous process improvement.</li> <li >Contribute to team growth through knowledge sharing, technical training, and continuous process improvement initiatives.</li> </ul> <h3 >Required Qualifications</h3> <ul > <li >A degree in Computer Science or a related discipline.</li> <li >A minimum of <strong >4+ years of experience</strong> in systems administration, solutions delivery, or integration engineering.</li> <li >Demonstrated experience with the support and operations of highly critical production systems.</li> <li >Understanding of ITSM processes, including incident management, change management, problem management, and Service Level Agreements (SLAs).</li> </ul> <h3 >Work Environment</h3> <p >This is a full-time position based in Dammam, KSA. The role requires participation in <strong >24/7 onsite shifts</strong> to ensure continuous operational support for critical systems.</p> <h3 >Application Information</h3> <p >Interested candidates are invited to apply. Salary details will be discussed during the interview process.</p>

<h3 >About Ebttikar Technology Company</h3> <p >Ebttikar Technology Company is seeking a <strong >Network Security Engineer</strong> to join its team in Dammam, Eastern, Saudi Arabia. The company is dedicated to maintaining robust and secure network infrastructures to protect its operations and data.</p> <h3 >The Role of Network Security Engineer</h3> <p >The Network Security Engineer is responsible for the comprehensive management of network security. This involves designing, implementing, monitoring, and maintaining secure network infrastructure. The primary objective of this role is to protect organizational systems and data effectively from evolving cyber threats, ensuring continuous security and operational integrity.</p> <h3 >Key Responsibilities</h3> <ul > <li >Manage various network security technologies and systems.</li> <li >Monitor security events and alerts to identify potential vulnerabilities and threats.</li> <li >Respond promptly and effectively to security incidents, including investigation and resolution.</li> <li >Ensure continuous compliance with established security policies, procedures, and industry standards.</li> </ul> <h3 >Required Experience</h3> <p >Candidates for this position must possess <strong >5 to 10 years of experience</strong> in network security engineering or a closely related field. This experience should demonstrate a strong background in the design, implementation, and maintenance of secure network environments.</p> <h3 >Work Type and Location</h3> <p >This is a <strong >full-time</strong> position based in <strong >Dammam, Eastern, Saudi Arabia</strong>. The salary for this role will be discussed directly with qualified candidates during the interview process.</p> <h3 >Application Process</h3> <p >Ebttikar Technology Company invites qualified professionals to apply for the Network Security Engineer role. Further details regarding the application and selection process will be provided upon initial contact.</p>

<h3 >About the Role</h3> <p >Samsung E&amp;A Saudi Arabia is seeking a highly skilled and experienced <strong >Construction Engineer</strong> to join its team in Dammam, Eastern Province, Saudi Arabia. This <strong >full-time</strong> position is critical for managing and optimizing construction processes within complex refinery and petrochemical projects. The successful candidate will play a key role in ensuring efficient project execution and enhancing operational systems.</p> <h3 >Key Responsibilities</h3> <ul > <li >Manage <strong >EPC construction activities</strong>, demonstrating expertise in both piping and civil construction, with a focus on hands-on project execution.</li> <li >Lead and coordinate with <strong >India-based support teams</strong>, ensuring seamless communication and bridging gaps between project sites and remote support.</li> <li >Identify and analyze <strong >field-related issues</strong>, proposing and implementing system enhancements to drive overall operational efficiency.</li> </ul> <h3 >Required Experience and Qualifications</h3> <ul > <li >A minimum of <strong >5 years of work experience</strong> as a System Engineer within Refinery &amp; Petrochemical projects, specifically in FEED or EPC phases.</li> <li >Proven experience in at least <strong >two Refinery &amp; Petrochemical projects</strong>, covering either FEED or EPC stages.</li> <li >Demonstrated <strong >hands-on experience</strong> in both Piping and Civil Construction Management.</li> </ul> <h3 >Essential Technical Skills</h3> <ul > <li >Advanced proficiency in <strong >Microsoft Excel</strong>.</li> <li >Competence in <strong >Power BI</strong> for data analysis and visualization.</li> <li >Familiarity with <strong >UPV</strong> systems.</li> <li >Experience utilizing <strong >Palantir</strong> platforms.</li> </ul> <h3 >Work Environment and Employment Details</h3> <p >This is a <strong >full-time</strong> employment opportunity based in <strong >Dammam, Eastern Province, Saudi Arabia</strong>. The role requires a commitment to working within a dynamic project environment focused on large-scale industrial construction.</p> <h3 >Application Process</h3> <p >Candidates who meet the outlined qualifications and experience are invited to submit their application for this role.</p>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركة ابتكار للتقنية عن <strong >مهندس نظم تقنية معلومات</strong> للانضمام إلى فريقها في الدمام، المنطقة الشرقية. يتطلب هذا الدور خبرة عملية تتراوح بين سنتين وخمس سنوات، وهو متاح بنظام الدوام الكامل. يركز الدور بشكل أساسي على الإشراف والمتابعة الدقيقة لجميع مراحل دورة حياة نظم تقنية المعلومات، بدءاً من جمع المتطلبات وصولاً إلى التنفيذ والتقييم.</p> <h3 >المهام الرئيسية</h3> <p >يتولى مهندس نظم تقنية المعلومات مسؤولية متابعة وتقييم عملية جمع المعطيات وتحديد متطلبات نظم تقنية المعلومات. كما يشرف على إجراءات تصميم وتخطيط وإدارة هذه النظم لضمان كفاءتها وفعاليتها. يمتد دوره ليشمل متابعة وتقييم إجراءات التنفيذ وفحص النظام بدقة، بالإضافة إلى إعداد الوثائق والتقارير المتخصصة التي توثق نتائج هذه الدراسات والتحاليل، والقيام بعرضها ومناقشتها مع الأطراف المعنية.</p> <h3 >المسؤوليات الأساسية</h3> <ul > <li ><strong>إدارة البنية التحتية:</strong> تشغيل وصيانة خوادم المنشأة والأنظمة الافتراضية لضمان استمرارية العمل.</li> <li ><strong>استمرارية الأعمال:</strong> حماية البيانات، وإدارة بيئات النسخ الاحتياطي، وتأمين استرجاعها، وتطبيق خطط التعافي من الكوارث (DRP).</li> <li ><strong>الدعم الفني المتقدم:</strong> مراقبة أداء النظم بشكل مستمر، وتحليل الثغرات الأمنية، وتحديث برمجيات التشغيل بصفة دورية للحفاظ على أمان وكفاءة الأنظمة.</li> </ul> <h3 >المؤهلات والخبرات</h3> <ul > <li >خبرة عملية تتراوح بين <strong >سنتين وخمس سنوات</strong> في مجال نظم تقنية المعلومات أو مجال ذي صلة.</li> <li >فهم قوي لمفاهيم إدارة البنية التحتية، استمرارية الأعمال، والدعم الفني المتقدم.</li> <li >القدرة على إعداد التقارير الفنية والوثائق المتخصصة وعرضها بفعالية.</li> </ul> <h3 >تفاصيل العمل</h3> <ul > <li ><strong>الموقع:</strong> الدمام، المنطقة الشرقية.</li> <li ><strong>نوع الوظيفة:</strong> دوام كامل.</li> <li ><strong>الراتب:</strong> غير معلن.</li> </ul> <h3 >التقديم</h3> <p >ندعو المهتمين ممن تنطبق عليهم المتطلبات للتقديم على هذه الفرصة ضمن فريق شركة ابتكار للتقنية.</p></div>

<h3 >About Al Ahmady Medical Complex</h3> <p >Al Ahmady Medical Complex is a leading healthcare organization located in Dammam, Eastern, Saudi Arabia. The complex is dedicated to maintaining operational excellence and delivering exceptional patient care through its advanced medical facilities and services.</p> <h3 >The Role: Maintenance Engineer</h3> <p >Al Ahmady Medical Complex is seeking a skilled and motivated <strong >Maintenance Engineer</strong> to join its team in Dammam. This full-time position is essential for supporting the operational excellence, safety, and reliability of the complex's medical facilities and infrastructure.</p> <h3 >Key Responsibilities</h3> <ul > <li >Overseeing and performing maintenance on critical building systems, including HVAC, plumbing, and electrical systems.</li> <li >Managing and maintaining medical gas networks and other essential facility services.</li> <li >Planning and executing regular inspections and preventive maintenance programs to ensure system reliability.</li> <li >Ensuring adherence to all relevant safety regulations and compliance standards within the facilities.</li> <li >Contributing to effective asset management practices for facility equipment and infrastructure.</li> <li >Identifying and resolving technical issues, and preparing comprehensive reports on maintenance activities.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >Proven experience of <strong >2-5 years</strong> in building systems maintenance, specifically covering HVAC, plumbing, electrical systems, medical gas networks, and other essential facility services.</li> <li >Strong knowledge of safety regulations, compliance standards, and asset management principles.</li> <li >Demonstrated experience in planning, conducting inspections, and implementing preventive maintenance programs.</li> <li >Excellent problem-solving abilities, effective communication skills, and proficiency in reporting.</li> </ul> <h3 >Work Type and Location</h3> <p >This is a full-time position based at the Al Ahmady Medical Complex in Dammam, Eastern Province, Saudi Arabia.</p> <h3 >Application Information</h3> <p >Candidates who meet the specified qualifications and are interested in this role are encouraged to apply.</p>

<h3 >Role Overview</h3> <p >Iduast Company is seeking a <strong >Power Transformer Design Engineer</strong> for a full-time position located in <strong >King Salman Energy Park, Dammam, Eastern, Saudi Arabia</strong>. This role is responsible for leading the design and localization of high-voltage power transformers (220kV and above) for manufacturing operations within Saudi Arabia. The position focuses on establishing localized design standards, delivering technically optimized transformer solutions, supporting international bidding activities, and ensuring compliance with industry requirements while mentoring local engineering talent.</p> <h3 >Key Responsibilities</h3> <ul > <li >Lead the establishment of a localized design system for 220kV and above power transformers, including English design specifications, calculation standards, and drawing templates.</li> <li >Develop transformer designs in compliance with IEC, SASO, SEC, and Saudi Aramco technical standards and project requirements.</li> <li >Lead the preparation of technical proposals, bid documentation, technical clarifications, and customer design reviews for international projects.</li> <li >Perform and review electromagnetic, insulation, mechanical, lead arrangement, and tank structural designs for high-voltage transformers.</li> <li >Optimize transformer designs for Saudi operating conditions, including high ambient temperatures, desert environments, and sandstorm conditions.</li> <li >Control engineering changes, material selection, and design outputs while ensuring compatibility with local manufacturing capabilities and supply chains.</li> <li >Lead the investigation and resolution of major design issues, supporting manufacturing, testing, and field operations through root cause analysis and corrective actions.</li> </ul> <h3 >Technical Leadership and Compliance</h3> <p >The role requires strong technical leadership in power transformer design, ensuring all solutions meet stringent industry and project-specific standards. This includes adherence to <strong >IEC, SASO, SEC, and Saudi Aramco</strong> technical requirements. A critical aspect involves optimizing designs to perform reliably under challenging Saudi operating conditions, such as high ambient temperatures, desert environments, and sandstorms.</p> <h3 >Mentorship and Collaboration</h3> <p >A significant component of this position involves developing local engineering talent. The Power Transformer Design Engineer will mentor and train local design engineers by creating technical training materials and establishing engineering development programs. Additionally, the role necessitates close collaboration with manufacturing, testing, quality, and process engineering teams to ensure successful product development and production readiness.</p> <h3 >Experience Requirements</h3> <p >Candidates should possess <strong >5-10 years of experience</strong> in power transformer design, with a focus on high-voltage systems (220kV and above).</p> <h3 >Work Location</h3> <p >This full-time position is based at Iduast Company facilities within <strong >King Salman Energy Park, Dammam, Eastern, Saudi Arabia</strong>.</p>

<h3 >About the Opportunity</h3> <p >Robayet For engineering Conselting Servieces is seeking a <strong >Senior Fire Protection design Engineer</strong> to join our team in Dammam, Saudi Arabia. This full-time role is central to the design, coordination, and review of fire protection systems for diverse industrial facilities and commercial projects. The ideal candidate will possess 5-10 years of experience and a strong background in fire protection engineering.</p> <h3 >Role Purpose and Key Focus Areas</h3> <p >The primary objective of this position is to ensure all fire protection designs comply with applicable local and international codes, standards, and authority requirements. The role involves close collaboration with architects, MEP engineers, consultants, and project teams to develop efficient and code-compliant fire protection solutions. Preference will be given to candidates with hands-on experience in HCIS processes and requirements, as well as Saudi Civil Defense approval projects.</p> <h3 >Key Responsibilities</h3> <ul > <li >Design and develop fire protection systems for industrial facilities and commercial projects, including fire sprinkler systems, fire alarm systems, fire suppression systems, standpipe and hose reel systems, and clean agent and foam systems where applicable.</li> <li >Prepare fire protection design calculations, technical reports, specifications, and detailed design and shop drawings.</li> <li >Coordinate fire protection design with architectural, structural, mechanical, electrical, and plumbing disciplines to ensure proper integration into the overall project.</li> <li >Review project requirements and ensure compliance with relevant local and international fire and life safety codes and standards.</li> <li >Support the preparation and submission of documents for HCIS and Civil Defense review and approval.</li> <li >Ensure designs meet HCIS regulations, Saudi Building Code requirements, Civil Defense requirements, and NFPA standards.</li> <li >Participate in design review meetings with clients, consultants, and internal teams.</li> <li >Provide technical support during project execution, including reviewing material submittals, RFIs, method statements, and contractor shop drawings.</li> <li >Conduct site visits when required to verify installation compliance with approved drawings and design intent.</li> <li >Assist in testing, commissioning, and final inspection activities related to fire protection systems.</li> <li >Support authority inspections, audits, and approval processes with relevant stakeholders.</li> <li >Stay current with developments in fire protection engineering, code updates, and industry best practices.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >5-10 years of experience as a Fire Protection Engineer.</li> <li >Strong background in fire protection design for industrial facilities and commercial projects.</li> <li >Demonstrated experience with HCIS processes and requirements.</li> <li >Proven track record in Saudi Civil Defense approval projects.</li> </ul> <h3 >Technical Acumen and Compliance</h3> <p >Candidates must possess a comprehensive understanding of relevant local and international fire and life safety codes and standards, including HCIS regulations, Saudi Building Code requirements, Civil Defense requirements, and NFPA standards. The role requires proficiency in preparing detailed design calculations, technical reports, specifications, and various engineering drawings for fire protection systems.</p> <h3 >Work Environment and Collaboration</h3> <p >This full-time position is based in Dammam, Saudi Arabia, and involves working within a collaborative environment. The Senior Fire Protection design Engineer will engage with various internal and external stakeholders, including clients, consultants, and multidisciplinary project teams, to deliver integrated and compliant fire protection solutions.</p>

<h3 >About the Opportunity</h3> <p >Samsung E&amp;A Saudi Arabia is seeking a <strong >Project Hydrogeologist</strong> to join their team in Dammam, Eastern Province, Saudi Arabia. This full-time position is integral to plant EPC projects and reports directly to the PMO Group Leader.</p> <h3 >Role Purpose</h3> <p >The Project Hydrogeologist will be responsible for the management and execution of hydro testing activities within large-scale plant EPC projects. This role involves overseeing the entire lifecycle of test packages, from preparation to system setup and coordination, ensuring efficient project delivery.</p> <h3 >Key Responsibilities</h3> <ul > <li >Prepare comprehensive test packages, manage their progress, and oversee reinstatement procedures.</li> <li >Set up hydro test systems and coordinate all associated flushing and drying activities.</li> <li >Support the prioritization and scheduling of testing activities to align with project timelines.</li> <li >Collaborate effectively with pre-commissioning teams and other cross-functional groups to ensure seamless project execution.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Minimum of <strong >5 years of experience</strong> in piping construction management within plant EPC projects.</li> <li >Demonstrated experience in pressure and hydro test execution, along with test package management.</li> </ul> <h3 >Work Environment and Location</h3> <p >This is a full-time position based in Dammam, Eastern Province, Saudi Arabia. Candidates must be available to work at overseas project sites, specifically within the Middle East region, as required by project demands.</p> <h3 >Application Process</h3> <p >Qualified candidates are invited to apply for this role. Salary details will be discussed during the interview process.</p>

<div dir="rtl"><h3 >نبذة عن الوظيفة</h3> <p >تبحث شركة الشريف للمقاولات والتنميه التجارية عن <strong >مهندس كهربائي</strong> للانضمام إلى فريقها في الدمام، بالمنطقة الشرقية. هذا الدور بدوام كامل ومناسب للمرشحين ذوي الخبرة الحديثة، حيث يتطلب من 0 إلى 1 سنة من الخبرة في المجال.</p> <h3 >طبيعة الدور</h3> <p >يركز هذا الدور على دعم مشاريع محطات التحويل والتوليد الكهربائية، ويشمل إعداد التصاميم والمخططات، ومتابعة التنفيذ الميداني، بالإضافة إلى تشخيص الأعطال وتحسين كفاءة الأنظمة. سيعمل المهندس الكهربائي ضمن فريق متخصص لضمان موثوقية وأداء الأنظمة الكهربائية في المشاريع الصناعية.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >إعداد التصاميم والمخططات الكهربائية لمشاريع محطات التحويل والتوليد.</li> <li >متابعة تنفيذ الأعمال الميدانية المتعلقة بالأنظمة الكهربائية.</li> <li >تطوير مخططات ومواصفات أنظمة وخطوط محطات التوليد وشبكات ومحطات التحويل الكهربائية، وتحديد مساراتها ومتطلباتها التشغيلية.</li> <li >إعداد برامج تشغيل المعدات الكهربائية في محطات التوليد والتحويل ضمن المشاريع الصناعية.</li> <li >تشخيص أعطال الأجهزة والمعدات الكهربائية داخل المحطات.</li> <li >متابعة إجراءات الإصلاح والمعالجة مع الجهات المعنية لضمان استمرارية العمل.</li> <li >إعداد الوثائق والتقارير الفنية المتخصصة بناءً على نتائج الدراسات والتحاليل.</li> <li >عرض ومناقشة الوثائق والتقارير لضمان تحسين كفاءة وموثوقية أنظمة محطات التوليد والتحويل الكهربائية.</li> </ul> <h3 >متطلبات الخبرة</h3> <p >يتطلب هذا الدور خبرة عملية تتراوح من <strong >0 إلى 1 سنة</strong> في مجال الهندسة الكهربائية، ويفضل أن تكون في مشاريع محطات التحويل والتوليد أو ما شابهها.</p> <h3 >موقع العمل ونوعه</h3> <p >تتوفر هذه الفرصة للعمل بدوام كامل في مدينة الدمام، ضمن المنطقة الشرقية بالمملكة العربية السعودية. سيعمل المهندس الكهربائي في بيئة مهنية تدعم التطور في مجال المقاولات والتنمية التجارية.</p> <h3 >معلومات إضافية</h3> <p >الراتب لهذا الدور غير معلن. هذه فرصة للمهندسين الكهربائيين الطموحين لبدء مسيرتهم المهنية أو تطويرها في مجال المقاولات والتنمية التجارية.</p></div>

<h3 >About Upwing Energy and the Role</h3> <p >Upwing Energy is seeking a <strong >Project Engineer</strong> to join its team in Dammam, Eastern Province, Saudi Arabia. This full-time role is crucial for supporting the successful execution of oil and gas surface infrastructure projects. The ideal candidate will possess hands-on experience in interpreting Piping and Instrumentation Diagrams (P&amp;IDs), working with surface production equipment, and managing fabrication and installation processes. The Project Engineer will ensure projects meet technical specifications, quality standards, and operational requirements through close collaboration with clients, engineering teams, quality groups, wellsite employees, and vendors.</p> <h3 >Key Responsibilities</h3> <ul > <li >Lead and support projects involving the development, fabrication, and installation of surface infrastructure for oil and gas applications.</li> <li >Read, interpret, and analyze P&amp;IDs, engineering drawings, and specifications to ensure proper equipment selection and system integration.</li> <li >Conduct wellsite surveys prior to project execution, assessing site conditions, verifying infrastructure readiness, and identifying potential challenges.</li> <li >Coordinate with clients, vendors, and field personnel to ensure seamless installation and operation of equipment.</li> <li >Work closely with vendors, fabricators, and installation teams to ensure compliance with project requirements, industry standards, and safety regulations.</li> <li >Collaborate with multidisciplinary teams, including design engineers, procurement specialists, and field service teams, to streamline project workflows.</li> <li >Ensure all equipment and systems adhere to local regulations, international standards (API, ASME, ISO), and ARAMCO requirements where applicable.</li> <li >Identify potential project risks, develop mitigation strategies, and prepare associated cost estimates while controlling costs throughout the project.</li> <li >Maintain detailed records of project progress, prepare technical reports, and provide regular updates to management and stakeholders.</li> <li >Interact with customers to ensure safe and efficient field operations and provide guidance to the internal engineering team for interface equipment design.</li> <li >Assure adequate third-party Quality Assurance and Quality Control (QA/QC) of any equipment for the project.</li> <li >Record all non-conformances and non-production time, reporting these to management and stakeholders.</li> <li >Ensure all work within the area of responsibility is adequately documented and lessons learned are captured for future operations.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >At least <strong >two years of project management or coordination experience</strong>.</li> <li >Hands-on experience in reading and interpreting Piping and Instrumentation Diagrams (P&amp;IDs).</li> <li >Experience working with surface production equipment and managing fabrication and installation processes.</li> <li >System integration experience with intelligent completion systems is a plus.</li> <li >Extensive knowledge of Well Interventions (slickline, e-line, pumping, coiled tubing), Completions, DST/TCP, Surface Testing, and operations is a plus.</li> <li >Experience in ESP and other completion equipment design is a plus.</li> <li >IADC WellSharp or IWCF Well Intervention Pressure Control Certificate is a plus.</li> <li >Experience in conducting well on paper, intervention campaigns, and/or System Integration Testing (SIT) is a plus.</li> </ul> <h3 >Essential Skills and Attributes</h3> <ul > <li >Ability to work effectively within a multi-disciplinary team environment.</li> <li >Highly perceptive listening skills and openness to ideas from others.</li> <li >Ability to take initiative, work with minimal supervision, and remain committed to delivering high-quality results.</li> <li >Resilience and adaptability to dynamic environments and shifting project demands.</li> <li >Strong communication skills to convey complex technical concepts clearly across diverse teams and stakeholders.</li> <li >Collaborative approach, fostering positive relationships with clients, vendors, and internal teams.</li> </ul> <h3 >Work Environment and Physical Demands</h3> <p >The Project Engineer role requires a combination of office-based work and field visits to fabrication yards, vendor facilities, and oilfield wellsites. The position involves extended periods of sitting, standing, and walking, as well as the ability to lift up to <strong >25 kg (55 lbs.)</strong> and work in elevated areas or confined spaces. The engineer must be physically capable of wearing required Personal Protective Equipment (PPE), including hard hats, safety glasses, gloves, and steel-toe boots. Fieldwork may expose the individual to varying temperatures, humidity, loud noise, dust, fumes, and high-pressure equipment, necessitating strict adherence to safety protocols. Travel to client sites, vendor locations, or offshore facilities may be required based on project needs.</p> <h3 >Application Process</h3> <p >We encourage qualified candidates who meet the requirements to apply for this challenging role.</p>