Low Voltage Cable Jointer - Qassim Saudi

Maintenance and Repair Activities Perform preventive, predictive, corrective, and breakdown maintenance activities on assigned electrical equipment Carry out routine inspections and identify abnormal conditions such as overheating, unusual noise, vibration, oil leakage, loose connections, damaged cables, and insulation deterioration Perform cleaning, tightening, lubrication where applicable, replacement of defective parts, cable termination, minor repair work, and equipment restoration activities Troubleshoot electrical faults, alarms, trips, and abnormal operating conditions to support timely restoration of equipment and minimize plant downtime Ensure maintenance work is completed in accordance with approved procedures, OEM manuals, drawings, safety requirements, and site standards Verify the work area is clean, safe, and properly restored after completion of maintenance activities<br><br>v Support maintenance, inspection, and repair of electrical equipment including, but not limited to:<br><br>Medium-voltage and low-voltage switchgear, circuit breakers, motors repaire, contactors, relays, and control panels Generators, excitation systems, generator auxiliaries, and associated protection systems Generator Circuit Breakers, Isolated Phase Busbars, Gas-Insulated Bus systems, and associated auxiliary equipment where assigned Generator transformers, auxiliary transformers, and transformer auxiliary systems MV and LV motors, motor-operated valves, soft starters, variable frequency drives, and local control stations UPS systems, battery chargers, battery banks, DC distribution boards, emergency lighting, and diesel generator electrical systems Cable systems, cable trays, junction boxes, earthing systems, and lightning protection systems Electrical equipment associated with gas turbines, steam turbines, HRSG systems, water treatment systems, reverse osmosis plants, and balance-of-plant facilities Testing, Inspection, and Troubleshooting Use approved electrical test instruments, including multimeters, clamp meters, insulation resistance testers, continuity testers, earth resistance testers, and phase rotation meters Carry out routine electrical testing such as voltage checks, current checks, insulation resistance testing, battery checks, and earth resistance testing Assist with specialist testing activities such as relay testing, primary injection, secondary injection, breaker timing, contact resistance testing, transformer testing, thermography, and partial discharge testing where applicable Record all test readings accurately and immediately report abnormal results to the Electrical Maintenance Engineer Assist in identifying root causes of equipment failures and support corrective actions as directed Monitor equipment condition and report any developing defects or operational risks Installation, Commissioning, and Modification Support Assist with installation, commissioning, modification, and upgrading of electrical systems and equipment Support equipment testing, energization, functional checks, and return-to-service activities Ensure all installation and modification work complies with technical specifications, approved drawings, and safety requirements Safety, Permit-to-Work, and Compliance Follow all electrical safety rules, permit-to-work requirements, lockout/tagout procedures, grounding requirements, and arc-flash precautions Verify that equipment is properly isolated, discharged, grounded, and tested before work starts Participate in toolbox talks, risk assessments, safety observations, and incident investigations Immediately report unsafe conditions, damaged tools, electrical hazards, near misses, and incidents Ensure all maintenance work is performed in compliance with applicable site procedures, OEM requirements, and environmental, health, and safety standards Documentation and CMMS Support Complete maintenance checklists, inspection sheets, test reports, work completion records, and defect reports accurately Provide clear work feedback to the Electrical Maintenance Engineer, including work completed, materials used, defects found, and follow-up actions required Prepare basic reports on maintenance tasks, equipment condition, and identified issues for review by the Electrical Maintenance Engineer Spare Parts, Tools, and Housekeeping Check the availability of required spare parts, consumables, tools, and test instruments before starting work Handle, store, and preserve electrical spare parts and materials in accordance with site preservation requirements Maintain electrical hand tools, power tools, portable test instruments, and workshop equipment in good working condition Report shortages of spare parts, consumables, and defective tools to the Electrical Maintenance Engineer Support incoming inspection of electrical materials and spare parts in coordination with the Storekeeper when assigned Coordination and Teamwork Work closely with Electrical Maintenance Engineers, Operations personnel, Mechanical and I&C teams, contractors, OEM representatives, and other site personnel Support Operations during equipment isolation, release for maintenance, testing, energization, and return to service Assist in training junior technicians, and new team members in electrical maintenance practices and safety requirements Support continuous improvement by identifying recurring defects, maintenance issues, and opportunities to improve equipment reliability<br><br>Requirements<br><br>Technical Knowledge<br><br>Knowledge of electrical systems used in combined cycle power plants Knowledge of MV and LV switchgear, circuit breakers, transformers, motors, motor control centers, contactors, relays, UPS systems, battery chargers, and DC systems Understanding of generators, generator auxiliaries, power distribution systems, cable systems, earthing systems, and lighting systems Familiarity with electrical drawings, single-line diagrams, wiring diagrams, cable schedules, equipment manuals, and maintenance procedures Understanding of electrical safety requirements, permit-to-work systems, lockout/tagout procedures, grounding, hazardous-energy control, and arc-flash hazards Awareness of electrical protection devices and their functions<br><br>Minimum Qualifications And Experience<br><br>Education<br><br>Electrical Diploma, or an equivalent discipline Electrical trade certification is preferred<br><br>Experience<br><br>Minimum 3 to 5 years of electrical maintenance experience in a power plant, Combined cycle power plant experience is preferred<br><br>Personal Attributes<br><br>Strong commitment to safety, quality, reliability, and compliance Responsible, disciplined, and able to follow instructions and procedures Detail-oriented with a proactive approach to identifying equipment defects Good communication and teamwork skills Ability to work under pressure and manage multiple assigned tasks Willingness to work during planned outages, emergency breakdowns, and on-call duties when required Willingness to work in outdoor and industrial environments<br><br>Physical Requirements<br><br>Physically capable of working in industrial environments Ability to use appropriate personal protective equipment and follow all site safety requirements Ability to respond to emergency maintenance requirements as required

<h3 >About VINCI Energies and Axians Saudi</h3> <p >Axians Saudi, an operational entity of Cegelec Network and Security Systems and a subsidiary of VINCI Energies, specializes in the design, integration, and maintenance of advanced telecommunications and security systems. The company supports public, governmental, semi-governmental, and private organizations in transforming their digital infrastructure with robust solutions. Axians Saudi's expertise includes ICT solutions, physical security systems, communication networks, and critical digital infrastructures, delivered with a focus on innovation and sustainable performance in Al Qassim, Saudi Arabia.</p> <h3 >The Design Engineer Role</h3> <p >VINCI Energies is seeking a <strong >Design Engineer (Fresh Graduate Saudi)</strong> to join the Engineering team in Al Qasim. This contract role is suitable for a fresh graduate or an individual with up to one year of experience. The primary responsibility involves supporting the design and documentation of Extra Low Voltage (ELV), Physical, and Electronic Security Systems, ensuring compliance with HCIS and relevant local standards.</p> <h3 >Key Responsibilities</h3> <ul > <li >Assist in the design of ELV, CCTV, and Access Control systems.</li> <li >Support Low Voltage (LV) and Medium Voltage (MV) system designs, including lighting calculations and electrical Single Line Diagrams (SLDs).</li> <li >Conduct site surveys to gather necessary design inputs.</li> <li >Prepare engineering drawings, layouts, and technical documentation.</li> <li >Ensure all designs and documentation comply with project specifications and applicable standards.</li> <li >Support the evaluation of new technologies and products relevant to system design.</li> </ul> <h3 >Candidate Qualifications</h3> <ul > <li >Must be a Saudi National (Male/Female).</li> <li >Hold a Bachelor's Degree in Electrical Engineering (Power) or Electronics Engineering.</li> <li >Fresh graduate or possess up to 1 year of relevant experience.</li> <li >Possess basic knowledge of electrical and low-current systems.</li> <li >Familiarity with AutoCAD and Microsoft Office applications.</li> <li >Demonstrate strong communication and teamwork skills.</li> </ul> <h3 >Company Culture and Development</h3> <p >VINCI Energies operates on core values including Trust, Entrepreneurial Spirit, Solidarity, Autonomy, and Responsibility. The company offers a structured environment that includes personalized onboarding and tailored career follow-up. Employees have opportunities for growth, training, and mobility within an international group. The work environment emphasizes close and supportive management, recognition of performance through a company savings plan, and a commitment to shared achievements. VINCI Energies also prioritizes respect for the environment and local communities, alongside a strong commitment to employee health and safety, with CSR initiatives integrated into its operations.</p> <h3 >Application Information</h3> <p >This position offers an opportunity to contribute to significant digital infrastructure projects within a global organization. Further details regarding the application process will be provided upon interest.</p>

Join the Team at ABYAT - Your Gateway to Retail Excellence!<br>About us Are you ready to be part of the largest retail store in the Middle East ABYAT, spanning an impressive 22,000 square meters and offering over 22,000 products, is your one-stop destination for all things home improvement and more. From elegant tiles and captivating wallpapers to state-of-the-art lighting solutions and stylish kitchen fixtures, we pride ourselves on offering a diverse array of top-quality products under one roof.<br>Established locally with a vision for excellence, ABYAT has been setting benchmarks since its inception in September 2005. With an unwavering focus on our customers, we've crafted an experience that revolves around their needs, from our meticulously designed store layouts to our unparalleled service offerings.<br>Expanding beyond our roots in Kuwait, ABYAT is now making waves in Saudi Arabia and setting our sights on Qatar and the UAE. As we continue to grow, we're seeking passionate individuals to join our dynamic team and contribute to our journey of success.<br>Position: Facilities Manager Location: KSA - Riyadh Type: Full-time<br>The Facilities Manager is responsible for leading, managing, and controlling the end-to-end delivery of facilities management services across assigned ABYAT premises, including both hard and soft services.<br>The role is responsible for ensuring asset uptime, statutory and HSE compliance, effective maintenance planning, contractor performance, budget control, service quality, and operational readiness across facilities. This includes managing preventive and corrective maintenance activities, overseeing service providers, maintaining accurate records and reports, supporting minor projects and site mobilizations, and ensuring all facilities services are delivered in line with approved policies, procedures, SLAs, KPIs, and business requirements.<br>Key Responsibilities:<br>Facilities Operations Management Lead the overall delivery of hard and soft facilities management services across assigned premises. Ensure the implementation of approved policies, SOPs, IMS/HSE procedures, permits to work, risk assessments, and lockout/tagout requirements across all site activities. Translate contracts and scopes of work into clear site objectives, service standards, SLA/KPI targets, and operational plans. Build and maintain integrated site plans covering preventive maintenance calendars, manpower rosters, vendor schedules, consumables, spare parts, and seasonal contingencies. Define critical systems, operational risks, escalation paths, and response procedures to support business continuity. Hard Services and Asset Maintenance Ensure effective preventive and corrective maintenance for HVAC, electrical systems, lighting and controls, plumbing and drainage, firefighting and fire alarm systems, generators, UPS, BMS, elevators, and other critical building systems. Ensure maintenance is completed in line with OEM requirements, safety standards, and statutory requirements. Monitor alarms, system performance, asset condition, and repeated failures to identify risks and improvement opportunities. Approve shutdowns, energization activities, testing, and close-out documentation with proper evidence. Maintain asset registers including make, model, serial number, warranty details, criticality, lifecycle status, and maintenance history. Soft Services Management Manage cleaning, security, pest control, landscaping, waste management, hygiene services, and other soft services as applicable. Set service routes, frequencies, quality standards, inspection routines, and audit cycles. Ensure front-of-house, public areas, and customer-facing spaces are maintained to the required presentation and service standards. Coordinate additional coverage for peak periods, events, tenant moves, operational changes, and business requirements. Contractor and Vendor Management Develop scopes of work and RFQs for facilities services, maintenance contracts, minor works, and operational requirements. Support technical and commercial evaluations and recommend vendor awards within authority limits. Mobilize contractors and service providers, chair progress and HSSE meetings, review deliverables, and verify completion against scope, SLA, and KPI requirements. Manage contractor renewals, improvement plans, non-conformance reports, corrective actions, and close-out documentation. Validate vendor invoices against actual scope delivered and support Finance with payment sequencing. Budgeting, Cost Control and Reporting Prepare annual OPEX and CAPEX budget inputs for facilities activities. Forecast, monitor, and control facilities expenses to ensure activities are executed within approved budgets. Drive cost optimization through scope clarity, frequency reviews, vendor mix improvements, spare parts strategies, and energy-saving initiatives. Track budget versus actual performance and provide variance analysis, risks, and recommendations. Prepare timely monthly facilities management reports covering PPM/CM status, SLA/KPI performance, incidents, NCRs, utilities, vendor performance, budget status, risks, opportunities, and improvement actions. HSE, Compliance and Risk Management Enforce HSE requirements, permits to work, risk assessments, lockout/tagout, and safe systems of work across all facilities activities. Ensure statutory inspections, compliance certificates, permits, checklists, and life-safety documentation are complete, current, and accessible. Maintain readiness of emergency systems including fire pumps, fire alarms, generators, UPS, emergency lighting, and elevator rescue arrangements. Conduct drills, close audit findings, and maintain readiness for internal, external, HSE, quality, and statutory audits. Maintain a live risk register for critical assets and operations and implement mitigation and contingency procedures. CAFM / CMMS and Documentation Ensure CAFM/CMMS data integrity for all work orders, including scope, timestamps, manpower, parts, photos, signatures, and completion evidence. Maintain accurate documentation, logbooks, permits, certificates, asset records, maintenance reports, and compliance evidence. Analyze repeat faults, identify root causes, refine preventive maintenance frequencies and SOPs, and recommend corrective and improvement actions. Ensure all facilities records are complete, auditable, and available for management review and compliance purposes. Projects, Renovations and Site Mobilization Lead minor projects, renovations, and facilities improvement works as assigned. Review drawings, specifications, BOQs, method statements, risk assessments, and execution plans. Supervise work execution, monitor contractor performance, manage snags, and ensure proper handover and close-out. Manage new-site mobilization and transition activities, including asset capture, asset tagging, PPM readiness, emergency plans, and handover packs to steady-state operations. Energy and Utilities Management Monitor energy and water consumption across assigned premises. Investigate consumption anomalies, leaks, overconsumption, and metering issues. Implement conservation initiatives such as set-point optimization, scheduling improvements, low-cost retrofits, and operational improvements. Track savings, return on investment, and performance improvements related to utilities and resource consumption. Stakeholder Coordination Act as the primary facilities contact for internal stakeholders, clients, landlords, tenants, consultants, vendors, contractors, and authorities. Manage approvals, communications, escalations, service recovery, inspections, permits, and statutory compliance coordination Coordinate with Procurement, Finance, HSE/LP, Helpdesk/CAFM, Operations, and Senior Management to ensure smooth facilities operations. Provide updates, reports, recommendations, and escalation support to management as required.<br>Qualifications:<br>8 to 10 years of experience in Facilities Management, with at least 4 years in a supervisory or leadership role. Proven experience managing complex facilities, multi-system sites, and multiple vendors or contractors. Strong experience in hard services, including HVAC, electrical, plumbing, fire systems, generators, UPS, BMS, elevators, and related building systems. Strong experience in soft services, including cleaning, security, pest control, landscaping, waste management, and hygiene services. Experience in preventive maintenance, corrective maintenance, asset management, root-cause analysis, and lifecycle planning. Experience in contract management, vendor management, scope writing, RFQs, bid evaluations, and SLA/KPI monitoring. Experience in budgeting, cost control, invoice validation, CAPEX/OPEX planning, and variance reporting. Hands-on experience with CAFM/CMMS systems and strong data/documentation accuracy. Knowledge of HSE, statutory compliance, emergency readiness, audits, permits, inspections, and certifications. Experience in minor projects, renovations, drawings, BOQs, commissioning, testing, snagging, and handover is preferred. Advanced reporting skills using Excel, Power Point, dashboards, and performance reports.<br>Apply now and take the first step towards an exciting career with ABYAT!

About The Company<br><br>Nokhbat Segadty Trading Company operates an e-commerce store, retail branches, seasonal exhibitions, and an external manufacturing line for custom seating products.<br><br>Our operations are managed through an integrated ecosystem that includes:<br><br> Zid for e-commerce orders. Amazon, Trendyol, and other marketplaces. WMS for inventory and warehouse transactions. Click Up for task management, documentation, and operational follow-up. External fulfillment, logistics, courier, and manufacturing partners. <br><br>We also have a unified and approved 182-page Operations Manual covering procedures, responsibilities, required evidence, common errors, and escalation paths. You will not be starting from scratch; you will inherit an established operating system and be responsible for managing, enforcing, and improving it.<br><br>Role Summary<br><br>We are looking for an experienced Operations & Logistics Manager to lead the complete order and fulfillment cycle—from the moment an order is received through Zid or a marketplace, through picking, packing, fulfillment, shipping, and final delivery to the customer.<br><br>The role includes managing warehouse and inventory activities through the WMS, overseeing fulfillment and courier partners, managing marketplace operations, coordinating stock replenishment for branches and seasonal exhibitions, supervising external manufacturing, and ensuring that all teams comply with the approved service level agreements.<br><br>This is a hands-on leadership role that requires strong operational ownership, attention to detail, analytical thinking, and the ability to identify root causes rather than only resolving individual incidents.<br><br>Key Responsibilities<br><br>E-Commerce and Order Fulfillment<br><br> Manage and monitor daily orders through the Zid Dashboard. Oversee the complete order lifecycle from order receipt to picking, packing, shipping, delivery, cancellation, return, or final closure. Ensure that no order remains in any operational status beyond the approved processing time. Review and process incoming orders and confirm that they are ready for fulfillment. Coordinate picking, packing, and order fulfillment with warehouse and fulfillment teams. Monitor pending, delayed, cancelled, and exception orders and take immediate corrective action. Resolve operational issues involving missing products, incorrect quantities, duplicate orders, cancellations, exchanges, and returns. Ensure all order statuses are accurate and updated across Zid, the WMS, fulfillment systems, and courier systems. Investigate recurring order issues, identify their root causes, and implement preventive actions. <br><br>Marketplace Operations<br><br> Manage daily operations across Amazon, Trendyol, and other marketplaces. Process and monitor marketplace orders according to each platform's operational requirements and service level agreements. Monitor cancellations, returns, delayed orders, failed fulfillment, and marketplace penalties. Ensure order and shipment statuses are updated accurately across all platforms. Coordinate product availability and inventory synchronization between the e-commerce store and marketplaces. Resolve issues related to stock keeping units, barcodes, product mapping, bundles, and inventory synchronization. Ensure marketplace orders are deducted from the correct inventory location. Coordinate with the technical team to maintain and improve marketplace integrations and automation. Identify operational issues that may negatively affect marketplace ratings, account health, or customer experience. <br><br>Warehouse and Inventory Management<br><br> Manage inventory movements and warehouse transactions through the WMS. Ensure that all receipts, issues, returns, transfers, damaged items, and stock adjustments are supported by approved documents. Monitor stock accuracy and reconcile physical inventory with system inventory. Investigate inventory discrepancies and resolve them before they become financial losses. Ensure accurate stock keeping unit and barcode mapping across all sales channels. Monitor low-stock and out-of-stock products and initiate replenishment when required. Supervise bundle assembly and disassembly and ensure all related movements are documented correctly. Control internal stock transfers and ensure the receiving and issuing locations record each movement accurately. Prevent unauthorized manual inventory adjustments and maintain a complete audit trail for every stock movement. Conduct periodic inventory reconciliation with fulfillment partners. <br><br>Branch and Seasonal Exhibition Coordination<br><br> Manage stock replenishment and transfers between the main warehouse, retail branches, and seasonal exhibitions. Ensure all transfers are processed through the approved official workflow. Confirm that each transfer includes the required system files, warehouse documents, and signed issue vouchers. Monitor branch stock availability and coordinate replenishment based on actual sales and forecasted demand. Support the operational setup and stock preparation of new branches and seasonal exhibitions. Ensure transfers do not create unexplained inventory differences between locations. <br><br>Shipping and Logistics Operations<br><br> Manage daily coordination with courier, logistics, and fulfillment partners. Ensure each order is assigned to the appropriate shipping provider based on location, cost, service quality, and delivery requirements. Monitor airway bill creation, shipment pickup, dispatch, delivery status, failed delivery, and returns. Reconcile shipment statuses between the company's systems and courier platforms. Follow up on shipments that remain in "Ready," "Pending," or other delayed statuses beyond the approved service level. Resolve delivery issues in coordination with couriers, warehouse teams, fulfillment partners, and customer service. Analyze courier performance, delivery times, failure rates, return rates, and recurring complaints. Escalate repeated failures and recommend changing the courier or fulfillment provider when necessary. Review shipping costs and ensure that invoices and surcharges comply with approved commercial agreements. Support and monitor shipments to Gulf Cooperation Council countries. <br><br>External Manufacturing Operations<br><br> Supervise external manufacturing of custom seating and related products. Monitor production schedules, delivery commitments, quality standards, and pending orders. Coordinate with workshops and suppliers to resolve delays and quality issues. Track customer complaints related to manufacturing quality and ensure corrective action is completed. Apply approved delay deductions, quality compensation, and financial settlements. Coordinate with finance to ensure accurate settlement of manufacturing charges, deductions, and compensation. Identify recurring production defects and escalate them to senior management with corrective recommendations. <br><br>Team Leadership and Daily Operations<br><br> Lead warehouse, logistics, fulfillment, and order-processing teams. Set daily operational priorities and assign responsibilities clearly. Monitor employee productivity, order accuracy, and compliance with approved procedures. Ensure every outgoing shipment is scanned and documented through the approved tracking sheet. Hold team members accountable for delays, errors, missing documentation, and unclosed tasks. Train new employees using the approved Operations Manual and confirm their understanding of each procedure. Ensure tasks and operational evidence are documented through Click Up. Maintain clear ownership of every pending issue until it is fully resolved and closed. <br><br>Operations Control, Reporting, and Improvement<br><br> Prepare daily, weekly, and monthly operational reports. Track order fulfillment, delays, cancellations, returns, inventory discrepancies, delivery failures, and operational errors. Build and maintain operational dashboards using raw data from different systems. Monitor performance against approved key performance indicators and service level agreements. Identify recurring issues and conduct root-cause analysis. Implement corrective and preventive actions and measure whether they successfully resolved the problem. Recommend automation opportunities that reduce manual work and operational errors. Update the Operations Manual and workflows whenever a process, system, responsibility, or policy changes. Ensure that every process has a clearly assigned owner, completion deadline, required evidence, and escalation path. Coordinate continuously between E-Commerce, Marketplaces, Warehouse, Branches, Customer Service, Finance, Technical, Fulfillment, Logistics, and External Manufacturing teams. <br><br>Requirements<br><br>Requirements<br><br> Minimum of six years of experience in operations, logistics, e-commerce fulfillment, retail operations, or a similar field. Proven leadership experience managing warehouse, fulfillment, logistics, or e-commerce operations teams. Hands-on experience with a Warehouse Management System. Experience using Click Up or a similar task-management and documentation platform. Strong experience in order processing, inventory management, fulfillment, shipping, and operational reconciliation. Ability to create, document, implement, and measure operational procedures—not only execute them. Experience managing external parties such as couriers, fulfillment providers, warehouses, suppliers, or manufacturing workshops. Strong numerical and analytical skills, including shipping-cost calculations, inventory variance analysis, and operational performance measurement. Strong proficiency in Excel and Google Sheets. Ability to create reports and dashboards from raw operational data. Strong problem-solving and root-cause analysis skills. Ability to manage a high volume of orders and coordinate across several teams. Strong attention to detail and a high level of ownership. Professional working proficiency in Arabic and English. <br><br>Preferred Qualifications<br><br>The following experience is an advantage but is not mandatory:<br><br> Experience with Zid or a similar e-commerce platform. Experience with Amazon Seller Central, Trendyol, or other marketplaces. Experience with marketplace integrations and inventory synchronization. Experience opening and replenishing retail branches or seasonal exhibitions. Experience shipping orders to Gulf Cooperation Council countries. Experience supervising external manufacturing operations. Experience building automated operational dashboards. Experience using artificial intelligence tools for reporting, analysis, dashboards, automation, or process improvement. <br><br>Key Performance Indicators<br><br>Performance in this role will be measured through:<br><br> On-Time Fulfillment Rate. Order Processing Time. Order Accuracy Rate. Marketplace Service Level Agreement Compliance. Number and Age of Pending and Delayed Orders. Order Cancellation Rate. Inventory Accuracy. Stock Availability. Inventory Reconciliation Differences. Return and Failed Delivery Rate. Courier and Fulfillment Partner Performance. Issue Resolution Time. Branch Replenishment Accuracy. External Manufacturing Lead Time and Quality. Compliance with Approved Procedures. Overall Operational Efficiency. <br><br>Benefits<br><br>What We Offer<br><br> A documented operational system with a 182-page Operations Manual, approved policies, clear responsibilities, and defined authority. An established operating structure that you will manage and improve. Genuine decision-making authority, including courier selection, stock-transfer approval, operational escalation, and partner-performance decisions. Direct communication with the General Manager without unnecessary management layers.

Tips: Provide a summary of the job, what success looks like in your position, and how this role fits into the organization as a whole.<br><br>Responsibilities<br>1. Implement the annual performance management plan, and follow up on evaluation cycles, stages, schedules, and requirements, in accordance with the approved plan and instructions. 2. Prepare drafts for performance evaluation criteria, forms, manuals, and competency frameworks, study their effectiveness, and submit development proposals to the Head of the Performance Unit. 3. Study job descriptions, plans, and approved operational objectives, and determine performance areas, expected results, and measurement sources based on the nature of the jobs. 4. Provide technical support to line managers when drafting performance objectives, indicators, weights, and targets, without compromising their responsibility for defining and evaluating their employees' performance. 5. Review performance objectives and indicators, verify their clarity, measurability, and alignment with job tasks, ensure the completeness of their weights, targets, and verification sources, and provide feedback thereon. 6. Prepare lists of employees eligible for probation period evaluation, review their evaluation forms, results, and justifications, and submit recommendations regarding them to the Head of the Performance Unit. 7. Prepare executive requirements for periodic and annual performance evaluation cycles, including employee lists, forms, instructions, timelines, and necessary data. 8. Follow up on the completion of evaluation stages by line managers and employees, monitor delays or deficiencies, and coordinate with the concerned entities to address them within specified timeframes. 9. Review performance evaluation forms and results, and verify the completeness of their elements, weights, justifications, evidence, and the application of approved evaluation standards. 10. Analyze evaluation results, monitor discrepancies and unusual cases or those not supported by sufficient justifications, and prepare feedback and recommendations thereon. 11. Prepare data and analyses necessary for performance result review and calibration sessions, and document observations, adjustments, and the results issued therefrom. 12. Review employee appeals against evaluation results, examine their justifications, documents, and statements from relevant parties, and prepare recommendations for their resolution. 13. Assist line managers in preparing performance improvement plans, review areas for improvement, their procedures, targets, and timelines, and monitor the implementation of plans and analyze their results. 14. Identify high and low-performing employees and classify them according to approved results, and prepare recommendations related to recognition, motivation, development, and remediation. 15. Analyze performance results to extract training needs and professional and behavioral gaps, and coordinate with the Training Unit regarding addressing them within development plans. 16. Review performance data and records, probation periods, appeals, and improvement plans, verify the accuracy of their updates, prepare periodic reports and indicators, and maintain the confidentiality of data and results. 17. Perform other tasks assigned related to the nature of the job, within the approved scope of work.<br><br>Qualifications<br>Bachelor's degree in Human Resources Management, Business Administration, or a related field. It is preferred to hold a basic professional certification in Human Resources or Performance Management. Example: Excellent verbal and written communication skills.