Low Voltage Cable Jointer - Eastern Province Saudi

<p>Eram Talent, a leading talent acquisition company in the Oil &amp; Energy sector, is seeking an experienced Expeditor.</p><p>The Expeditor is responsible for ensuring the timely procurement, manufacturing, inspection, documentation, and delivery of equipment and materials required for EPC projects. The role involves close coordination with suppliers, procurement, engineering, QA/QC, logistics, and project management teams to ensure project schedules are achieved.</p><p>Key Responsibilities</p><ul><li>Expedite purchase orders from placement through final delivery.</li><li>Monitor supplier progress against approved manufacturing and delivery schedules.</li><li>Coordinate with vendors to ensure timely submission of engineering documents, drawings, material certificates, and inspection reports.</li><li>Identify potential delays and proactively implement recovery plans.</li><li>Liaise with Engineering, Procurement, QA/QC, Inspection, Logistics, and Construction teams to resolve issues affecting delivery schedules.</li><li>Conduct supplier follow-up meetings, progress reviews, and expediting visits when required.</li><li>Monitor manufacturing progress and ensure compliance with project milestones.</li><li>Coordinate third-party inspections and ensure inspection release is achieved on schedule.</li><li>Track shipment readiness and coordinate with logistics for timely dispatch.</li><li>Maintain expediting reports, vendor status reports, and procurement dashboards.</li><li>Escalate critical issues to Procurement Manager and Project Management with recommendations for corrective actions.</li><li>Ensure compliance with project specifications, contractual obligations, and company procedures.</li><li>Support project close-out activities, including final documentation and material reconciliation.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Degree or Diploma in Engineering, Supply Chain, Mechanical Engineering, or related discipline.</p><p>Minimum 10 years of experience as an Expeditor in EPC projects.</p><p>Experience in Oil &amp; Gas, Petrochemical, Power, Offshore, or Industrial Construction projects is preferred.</p><p>Strong understanding of procurement lifecycle, manufacturing processes, vendor management, and logistics.</p><p>Familiarity with international codes and standards applicable to EPC projects.</p>

<p>We are seeking an experienced Electrical Construction Manager to lead and manage industrial electrical and E&amp;I construction projects from mobilization and installation through testing, commissioning, energization, and final client handover. Key Responsibilities Plan, manage, and supervise industrial electrical construction projects. Lead installation of MV/LV substations, transformers, switchgear, MCCs, and switchyards . Supervise cable laying, jointing, termination, testing, and energization activities. Oversee installation of motors, pumps, VFDs, protection, metering, and control systems . Coordinate PLC, SCADA, instrumentation, and communication-system works. Review electrical drawings, specifications, BOQs, method statements, and project schedules. Support planning teams with construction plans, manpower requirements, and material forecasts. Manage engineers, technicians, labor teams, and subcontractors. Coordinate with clients, consultants, vendors, and other engineering disciplines. Monitor project progress, productivity, cost, quality, and schedule performance . Ensure compliance with approved drawings, project specifications, and applicable standards. Enforce HSE requirements, permit-to-work procedures, and safe working practices.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s Degree in Electrical Engineering from a recognized university. 15+ years of experience in industrial electrical construction projects. Extensive experience with MV/LV systems, substations, transformers, switchgear, MCCs, cables, motors, protection, and control systems . Strong experience in installation, testing, commissioning, energization, and project handover . Proven experience managing multidisciplinary teams, subcontractors, project schedules, costs, quality, and HSE requirements . A senior electrical construction professional with strong hands-on project leadership experience across industrial electrical systems, capable of managing construction activities, teams, subcontractors, and client coordination while delivering projects safely, on schedule, and to specification.</p>

<p>Project Management &amp; Execution</p><p>Take complete ownership of assigned electrical projects from kick-off, engineering and procurement through construction, testing, commissioning, energization, handover, and closeout. Prepare and implement the Project Execution Plan (PEP) in accordance with contractual requirements and company procedures. Establish execution strategies, project priorities, construction sequences, manpower requirements, equipment requirements, and site logistics. Ensure projects are completed safely, on schedule, within approved budget, and according to contractual and technical requirements. Lead multidisciplinary project teams and ensure effective coordination between Engineering, Procurement, Construction, Planning, QA/QC, HSE, Commercial, and Finance functions. Identify project bottlenecks early and implement corrective and recovery actions.</p><p>Electrical Technical Management</p><p>Provide technical and execution leadership for electrical works including, as applicable: MV/LV power distribution systems. Substations and electrical rooms. Transformers. MV/LV switchgear. Motor Control Centers (MCCs). Distribution boards and panel boards. Cable trays, ladders, conduits, trenches, and duct banks. Cable pulling, dressing, glanding, and termination. Earthing and grounding systems. Lightning protection systems. Indoor and outdoor lighting systems. Emergency lighting. Generator and emergency power systems. Electrical interfaces with mechanical equipment. Control and instrumentation interfaces where applicable. Electrical infrastructure and utility works. Review and understand single-line diagrams, load schedules, cable schedules, electrical layouts, schematics, equipment data sheets, technical specifications, BOQs, IFC drawings, shop drawings, and vendor drawings. Ensure electrical installations comply with approved designs, applicable codes, client specifications, manufacturer requirements, and project standards.</p><p>Engineering Coordination</p><p>Coordinate with engineering teams for timely preparation, review, submission, and approval of electrical engineering deliverables. Monitor IFC drawings, shop drawings, material submittals, technical queries, RFIs, method statements, calculations, and vendor documents. Review engineering deliverables from a constructability and execution perspective. Identify discrepancies between drawings, specifications, BOQs, vendor requirements, and actual site conditions. Ensure technical issues are resolved before they affect construction progress. Coordinate electrical interfaces with Civil, Structural, Mechanical, HVAC, Plumbing, Instrumentation, Telecom, and other disciplines. Manage design changes and ensure their schedule and commercial impacts are properly documented.</p><p>Planning &amp; Project Controls</p><p>Coordinate development of the project baseline schedule, WBS, milestones, engineering schedule, procurement schedule, construction schedule, manpower histogram, equipment plan, and testing/commissioning schedule. Review daily, weekly, and monthly project progress. Monitor actual progress against approved baseline schedules. Review critical-path activities, look-ahead schedules, productivity, manpower utilization, material availability, and project forecasts. Identify delays and prepare appropriate catch-up/recovery schedules. Ensure accurate preparation of weekly and monthly progress reports. Monitor engineering, procurement, construction, and commissioning milestones as an integrated project schedule.</p><p>Procurement &amp; Vendor Management</p><p>Coordinate electrical procurement requirements with Procurement and Engineering teams. Monitor preparation and approval of material requisitions, technical bid evaluations, purchase orders, vendor drawings, and material submittals. Pay particular attention to long-lead electrical equipment such as transformers, switchgear, MCCs, generators, UPS systems, and specialized panels. Monitor manufacturing, inspection, FAT, shipment, delivery, and site availability against project requirements. Ensure procurement activities remain aligned with construction priorities. Coordinate with suppliers and manufacturers regarding technical clarifications and delivery issues. Ensure delivered materials comply with approved specifications and project requirements.</p><p>Construction &amp; Site Management</p><p>Lead site execution of all electrical construction activities. Ensure adequate manpower, tools, equipment, materials, access, and work fronts are available. Monitor subcontractor and site-team productivity. Coordinate daily construction priorities with site engineers, supervisors, planning, QA/QC, and HSE teams. Ensure installations are completed according to approved drawings, method statements, specifications, and inspection requirements. Resolve site constraints and technical issues promptly. Monitor material utilization and prevent unnecessary wastage or rework. Ensure proper coordination of electrical works with other disciplines before installation.</p><p>Subcontractor Management</p><p>Participate in technical and commercial evaluation of electrical subcontractors. Review subcontractor scope and ensure clear understanding of responsibilities and exclusions. Monitor subcontractor mobilization, manpower, productivity, progress, quality, and safety performance. Conduct regular subcontractor progress meetings. Verify subcontractor quantities and completed work before certification. Ensure subcontractors comply with contractual obligations and project requirements. Take corrective action when subcontractor performance falls below required standards.</p><p>Cost Control &amp; Commercial Management</p><p>Maintain control over project budget, committed cost, actual cost, forecast cost, cash flow, and profitability. Coordinate closely with Cost Control and Commercial teams. Monitor manpower costs, material costs, equipment costs, subcontractor costs, and productivity. Review BOQ quantities and actual executed quantities. Identify additional or out-of-scope works before execution wherever possible. Prepare and support variation orders, change orders, additional-work claims, extension-of-time claims, and cost-impact assessments. Ensure proper records are maintained to support commercial claims. Review client progress invoices/payment applications. Verify subcontractor progress claims. Protect Petroraq's contractual and commercial interests throughout the project.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Electrical Engineering from a recognized university.</li><li>Minimum 5 years of experience in a Project Manager or comparable project leadership position.</li><li>Strong experience managing industrial, infrastructure, commercial, utility, or EPC electrical projects.</li><li>Strong leadership and decision-making capability.</li><li>Excellent English written and verbal communication skills.</li><li>Proficiency in Microsoft Office.</li><li>Working knowledge of Primavera P6 and/or MS Project.</li><li>PMP certification is highly preferred.</li></ul>

<p>Supervise, manage and support subcontractor to proceed with construction effectively in accordance with project specification under safe condition. Coordinate between Top management and sub-contractor management to provide full site work detail as per site actual condition. Supervise site activities, site inspection, Commissioning in order to ensure quality, Safety and timely completion of Projects. Ensure Job closing to catch up with the rapid progress on the construction of Substations and associated cable laying works for major power distribution.</p><p>Follow up MTO (material take off) from FMC with sub-contractors to continue site activities with out any hurdle. Provide the latest DGW to sub-contractors as per site condition to avoid the rework. Follow up equipment's arrangement with sub-contractor to proceed the job on time. Evaluate performance of sub-contractors and report it to top management. Supervise and ensure safe condition at construction site in cooperation with safety department. Supervise and ensure construction quality in accordance with project specification and ITP (Inspection and Test Plan). Ensure necessary construction drawings and materials in advance of construction implementation. Manage construction progress by checking daily, weekly and monthly work done quantities. Prepare daily, weekly and monthly construction report. Prepare construction M/S (Method Statement) based on specification and requirements. Record B/P (Best Practice) and L/L (Lessons Learned). Coordinate with other disciplines or departments to resolve interface issues. Follow up RFI closing with client and sub-contractors. Review of BOQ in refer to Latest drawings and project standard specification and take note for material that needed to be change and possible revision of BOQ. Review of 3D modelling at the early project stage for cable routes, device installation locations, and interference with other disciplines. Review of Single Line diagram for overall Power System configuration and Energization. Prepare JSA or Equivalent Documents based on specification and requirements.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Construction experience in an oil/gas/petrochemical or power plants as supervisor.</li><li>Engineering and Construction Company working experience in Middle East is preferred.</li><li>Comprehensive knowledge on construction management and engineering standards.</li><li>Computer application ability (MS Office)</li><li>Knowledge of electric circuits, electrical equipment and Energization Commissioning and testing</li><li>High Voltage Substation (SWGR,TR) Energization</li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">OHTL</font></font></li><li>Fire Alarm</li><li>Cathodic Protection</li></ul>

<h3 >About Target Engineering Construction Co LLC</h3> <p >Target Engineering Construction Co LLC possesses over <strong >50 years of experience</strong> in EPC (Engineering, Procurement, and Construction) and industrial infrastructure. The company leverages in-house fabrication, marine expertise, and multidisciplinary capabilities to deliver projects with a focus on scale, reliability, and precision.</p> <h3 >The Role: Electrical QC Inspector</h3> <p >Target Engineering is seeking an experienced <strong >Electrical Quality Control Inspector</strong> to join its project team in Al Khafji, Eastern, Saudi Arabia. This full-time position is critical for upholding the highest quality standards across the construction, testing, and commissioning phases of projects. The role requires a strong background in Oil &amp; Gas EPC projects and 2-5 years of relevant professional experience.</p> <h3 >Key Responsibilities</h3> <ul > <li >Perform QC inspections and surveillance for electrical installation, testing, and commissioning activities.</li> <li >Review and verify Inspection and Test Plans (ITPs), method statements, drawings, and technical documentation.</li> <li >Conduct inspections for cable laying, glanding, termination, and insulation resistance (megger) testing.</li> <li >Inspect the installation of LV/HV electrical equipment, switchgear, transformers, motor control centers (MCCs), panels, and related electrical systems.</li> <li >Oversee electrical testing, continuity checks, functional testing, energization readiness, and commissioning activities.</li> <li >Witness and verify pre-commissioning and commissioning activities.</li> <li >Raise, track, and close Non-Conformance Reports (NCRs), punch list items, and quality observations.</li> <li >Coordinate closely with Construction, QA/QC, Commissioning, Engineering, and Client teams.</li> <li >Ensure compliance with project specifications and international standards, including IEC, IEEE, NEC, and other applicable codes.</li> <li >Maintain accurate inspection records, quality reports, and documentation.</li> <li >Support client inspections, audits, and quality assessments as required.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >Proven experience as an Electrical Quality Control Inspector.</li> <li >A strong background in Oil &amp; Gas EPC projects.</li> <li >2-5 years of professional experience in a relevant capacity.</li> <li >Familiarity with international electrical standards such as IEC, IEEE, and NEC.</li> <li >Ability to review technical documentation and ensure project specification compliance.</li> </ul> <h3 >Project Environment</h3> <p >The Electrical QC Inspector will operate within a project team focused on large-scale energy, marine, and civil infrastructure projects. This role contributes to a business recognized for its deep technical expertise and commitment to excellence.</p> <h3 >Application Information</h3> <p >Qualified candidates are invited to apply for this full-time position in Al Khafji, Eastern, Saudi Arabia. Salary details will be discussed directly with shortlisted applicants.</p>

<p>Job Summary We are looking for an experienced E &amp; I QC Inspector with a strong background in Oil &amp; Gas and Petrochemical projects. The ideal candidate should have hands-on experience in quality inspection, testing, and documentation for electrical and instrumentation works, ensuring compliance with project specifications, international standards, and client requirements. Contract Period: 6 Months-1 Years</p><p>Key Responsibilities</p><ul><li>Perform quality inspections for electrical and instrumentation installation activities.</li><li>Inspect cable laying, cable termination, glanding, and earthing works.</li><li>Conduct inspections of instrument installation, tubing, impulse lines, junction boxes, and field instruments.</li><li>Verify calibration of instruments and ensure compliance with approved procedures.</li><li>Witness testing activities such as continuity, insulation resistance (IR), loop checking, and functional testing.</li><li>Review inspection and test plans (ITPs), quality procedures, and method statements.</li><li>Prepare and maintain inspection reports, punch lists, and quality records.</li><li>Coordinate with construction, QA/QC, and client representatives during inspections.</li><li>Ensure all work complies with project specifications, applicable codes, and international standards.</li><li>Raise and follow up on Non-Conformance Reports (NCRs) and corrective actions.</li><li>Support pre-commissioning and commissioning activities as required.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Minimum 5 years of experience as an E &amp; I QC Inspector . Diploma or B.E./B.Tech in Electrical &amp; Instrumentation (E&amp;I). Contract Duration: 6 Months-1 Year Mandatory experience in Oil &amp; Gas or Petrochemical projects. Good knowledge of electrical and instrumentation inspection procedures and international standards. Experience in preparing quality documentation and inspection reports. Ability to read and interpret engineering drawings, P&amp;IDs, loop drawings, wiring diagrams, and technical specifications. Strong communication and coordination skills.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>SDEC is one of the leading equipment distributors and custom industrial equipment solution provider. SDEC has a dynamic portfolio of products which is determined by the needs of our customers. SDEC culture is characterized by high customer orientation with a long-term view of relationships. We are inviting applications from candidates who have experience working as Team Leader.</p><p>Job Purpose: Maintains and repairs industrial machinery and equipment using hoists, lift trucks &amp; hand and power tools. Troubleshoots problems and repairs or replace worn or broken parts as necessary. Performance is aimed at ensuring a minimum downtime of the equipment.</p><p>Main Responsibilities</p><ul><li>Ability to read and understand electrical drawings.</li><li>Perform voltage changes on generators based on customer requirements.</li><li>Re-wire, adjust, upgrade/install control panels and voltage regulators</li><li>Determine necessary parts and special tools required to complete jobs.</li><li>Diagnose issues with the Alternator.</li><li>Adjust speed controls and various settings.</li><li>Run load bank tests on the generator.</li><li>Work closely with the Workshop Supervisor and Service Manager on project progress, estimates.</li><li>Maintain a safe work environment at work sites.</li><li>Use electronic software and tools to diagnose, repair and reprogram generator controllers and related parameters.</li><li>Install, maintain, and enhance electrical systems and components, including fuses, lights, and wiring.</li><li>Inspect, test, and diagnose issues with electrical systems and components</li><li>Perform all work in a manner that meets and follows electrical codes, blueprints, and standards.</li><li>Test electrical systems and components to ensure proper functioning</li><li>Complete required documentation of repairs and service information.</li><li>Ensure adequate inventory of necessary supplies and parts.</li><li>Calibrate equipment to provided specifications.</li><li>Perform preventative maintenance on electrical systems and components.</li><li>Troubleshoot problems and make timely repairs.</li><li>Thorough and timely completion of job documentation.</li><li>Provide inputs to improve, update and add to the Work Instruction Manual.</li></ul><p>HSE Responsibilities</p><ul><li>Adhere to follow all company Quality, Health, Safety, And Environmental (QHSE) policies, procedures, and legal requirements.</li><li>Promptly identify and report unsafe conditions, incidents, and near misses to the appropriate supervisor or QHSE team.</li><li>Properly use, maintain, and store personal protective equipment (PPE) and safety tools as required by the job.</li><li>Attend and actively participate in mandatory Safety inductions, HSE trainings, safety meetings, emergency drills and root cause investigations.</li><li>Follow established emergency response procedures, including evacuation plans, fire response, and first aid if trained.</li><li>Follow protocols to minimize environmental impact, including proper waste disposal and reporting spills or leaks.</li><li>Provide suggestions to enhance Quality, Health, Safety and Environmental procedures and take responsibility and initiatives for continual improvement.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications &amp; Relevant Certifications</h2><ul><li>Technical Diploma/associate degree with major Electrical</li><li>Technical training certificates from OEMs</li><li>Driving License preferably GCC driving license</li></ul><h2>Knowledge Skills &amp; Experience</h2><ul><li>Working knowledge of Electrical components of genset like alternator, control panel</li><li>Troubleshooting and field repair of large sophisticated high or low speed diesel driven generators, low, medium, and high voltage 13.8KV as well as control devices e.g., auto-start, auto load share, auto-parallel, auto-stop, synchronizing.</li><li>Programming of controllers like Deep Sea and Synchronization systems</li><li>Practical knowledge of Mechanical, Thermal, Hydraulic, Electronics principles.</li><li>Perform welding, fabrication, and calibration as needed.</li><li>Thorough knowledge of Diesel Engine, Fuel, Lubrication, Cooling and Exhaust systems particularly of the rating used for Power generation and applications in Oil &amp; Gas industry.</li><li>Experience in servicing and repairing alternators of different name brands like Stamford, Marelli, Leroy-Somer, Mecc Alte, and Marelli along with control panel components like ATS, MCCB, MCB, PLCs and busbars for applications like synchronization.</li><li>Highly proficient in Technical English.</li><li>Proficiency with MS Office Suite particularly MS Outlook and Calendar</li><li>A strong commitment to all health and safety guidelines.</li><li>Effective communication in English.</li><li>Analytical and systematic problem-solving approach.</li><li>Prior experience in customer-facing roles is preferred</li><li>Years of relevant experience: 0-3</li></ul><p></p></section>

<h3 >About the Role</h3> <p >KBR Saudi Arabia is seeking a <strong >Principal Technical Professional - Telecommunication</strong> to join its multi-discipline engineering teams in Al Khobar. This full-time role focuses on delivering comprehensive telecommunication and security solutions for greenfield and brownfield projects within the oil and gas and petrochemical industries. The position requires over 15 years of specialized expertise in crafting and executing these solutions across various project phases.</p> <h3 >Role Overview and Project Engagement</h3> <p >The Principal Technical Professional will contribute to projects spanning conceptual studies, Front-End Engineering Design (FEED), and detailed design through to complete installations. This involves translating client technical requirements into robust commercial design solutions and managing interfaces between various package vendors. The role demands hands-on project experience in designing telecommunications solutions for both offshore and onshore environments.</p> <h3 >Key Responsibilities</h3> <ul > <li >Develop philosophies, specifications, block drawings, and datasheets for various telecommunication systems.</li> <li >Support the creation of drawings, layouts, cable routing drawings, cable schedules, interconnection and termination diagrams, and telecom installation drawings.</li> <li >Prepare scope of works, Requests for Quotation (RFQs), and material requests.</li> <li >Review telecommunications vendor documentation and manage interfaces between package vendors.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >Over <strong >15 years of expertise</strong> in crafting and executing comprehensive telecom and security solutions for oil and gas and petrochemical projects.</li> <li >Demonstrated successful delivery experience in telecommunications systems, translating client technical requirements into commercial design solutions.</li> <li >Hands-on project experience in designing telecommunications solutions for offshore or onshore environments.</li> <li >Familiarity with <strong >HCIS and Saudi Aramco standards and procedures</strong> is essential.</li> <li >RCDD and PSP certification are preferable.</li> </ul> <h3 >Essential Technical Expertise</h3> <p >Candidates must possess expertise in the following telecommunications systems:</p> <ul > <li >Aeronautical navigation and communications systems</li> <li >CCTV systems</li> <li >Data networks</li> <li >Marine navaids and communications systems</li> <li >Optical fiber communications systems</li> <li >Public address and general alarm systems</li> <li >Radio systems</li> <li >Satellite communications systems</li> </ul> <h3 >Work Type and Location</h3> <p >This is a full-time position based in Al Khobar, Saudi Arabia.</p>

<h3 >About Evostel and the Role</h3> <p >Evostel (previously AQESA), part of the Ali Zaid Al Quraishi &amp; Brothers Company (AZAQ Group), is seeking a <strong >Service Manager</strong> to lead its Electrical Services Business. This full-time position is based in Al Khobar, Eastern region, and involves managing the complete project and service lifecycle for electrical services. The AZAQ Group is a closed joint stock company with over 60 years of operation in the GCC region, known for its diversified investment portfolio and strategic international relationships.</p> <h3 >Role Purpose and Scope</h3> <p >The Service Manager will oversee the successful delivery of engineering, field services, testing &amp; commissioning, retrofit projects, maintenance activities, and technical consulting services across power distribution and industrial electrical systems. This includes pre-bid support, proposal preparation, engineering design, resource planning, project execution, customer acceptance, and project closure. The role focuses on driving technical excellence, operational efficiency, safety compliance, customer satisfaction, and sustainable business growth, while supporting Evostel's strategic expansion in electrical services. The Service Manager will lead multidisciplinary engineering and field service teams, collaborating with Sales, Pre-Sales, Procurement, Vendors, and Customers.</p> <h3 >Key Responsibilities</h3> <ul > <li >Support sales and business development teams in identifying service opportunities and lead technical discussions with customers during pre-bid and tendering stages.</li> <li >Review RFQs, tenders, specifications, and project requirements, developing technical and commercial service proposals, methodologies, and resource estimates.</li> <li >Lead engineering activities related to power distribution systems, protection systems, and electrical installations, ensuring compliance with relevant standards (IEC, IEEE, Saudi Electricity, Aramco, SABIC).</li> <li >Manage all field service activities, including planning, scheduling, and allocation of resources, while supervising site engineers, service engineers, technicians, and subcontractors.</li> <li >Oversee onsite supervision services for MV/LV switchgear, power transformers, MCCs, protection and control systems, and industrial power distribution networks.</li> <li >Manage testing, commissioning, and start-up services for various electrical systems, ensuring successful energization and customer acceptance.</li> <li >Lead retrofit, upgrade, and modernization projects, including switchgear life extension, protection relay upgrades, and SCADA integration.</li> <li >Manage specialist services such as fault analysis, power quality investigations, protection system troubleshooting, and various maintenance activities.</li> <li >Lead engineering consulting services including protection coordination, arc flash, load flow, and short circuit studies.</li> <li >Establish project execution plans, monitor milestones, manage risks, and ensure projects are delivered on time, within scope, and within budget.</li> <li >Ensure strict compliance with QHSE requirements, promote a strong safety culture, and drive continuous improvement in quality and operational standards.</li> <li >Lead, mentor, and develop engineering, commissioning, and field service teams, establishing performance objectives and succession plans.</li> <li >Manage department budgets and operational costs, improving service profitability and supporting annual business planning.</li> </ul> <h3 >Candidate Profile and Qualifications</h3> <p >The ideal candidate is a results-oriented electrical services leader with strong commercial, engineering, and operational capabilities. This role requires deep expertise in power distribution systems, protection and control, testing &amp; commissioning, modernization projects, and industrial maintenance services. The candidate should be capable of building a high-performance service organization that delivers safe, profitable, and customer-centric solutions.</p> <ul > <li ><strong >Education:</strong> Bachelor’s degree in Electrical Engineering.</li> <li ><strong >Experience:</strong> Minimum of 10-15 years in electrical engineering and field services, with at least 5 years in a leadership or managerial role.</li> <li ><strong >Technical Expertise:</strong> Extensive experience in MV/LV power distribution systems, testing, commissioning, protection systems, and industrial electrical projects.</li> <li ><strong >Client Experience:</strong> Proven track record serving industrial customers such as Aramco, SABIC, SEC, Royal Commission, petrochemical plants, utilities, and infrastructure clients.</li> <li ><strong >Leadership:</strong> Demonstrated ability to manage engineering and field service teams.</li> </ul>

<h3 >About the Opportunity</h3> <p >Wood (KSA) is seeking a <strong >TPE IV/Senior Site Structural Engineer</strong> to join its projects business. This full-time role is based in Al Khobar and involves contributing to the development of a new gold mine and processing facility located at a remote site in Saudi Arabia. The position requires a professional with over <strong >10 years of experience</strong> in structural engineering within site-based project environments.</p> <h3 >About Wood</h3> <p >Wood is a global leader in consulting, engineering, and operations, serving clients across the energy and materials sectors. With 33,000 professionals in approximately 50 countries, the company supports clients throughout the full asset lifecycle. Wood is committed to delivering safe, predictable outcomes, enabling resilient operations, and contributing to a lower carbon future, while striving for net zero through advanced facilities and efficient project delivery worldwide.</p> <h3 >Key Responsibilities</h3> <ul > <li >Manage structural and infrastructure works, including various building construction types, building design, equipment foundation design, and pipe and cable tray support design.</li> <li >Originate new engineering deliverables and revise existing ones.</li> <li >Review and check engineering deliverables to ensure compliance with company procedures, standards, and checklists.</li> <li >Supervise engineering work performed by junior team members.</li> <li >Participate in and conduct job-related training as required.</li> <li >Plan and complete work effectively within allocated man-hours, ensuring timely delivery.</li> <li >Interface, coordinate, and communicate effectively with the Project Manager and other team members.</li> <li >Delegate and distribute work, and manage the billability of the team.</li> <li >Coordinate with all relevant disciplines in the preparation and development of deliverables, ensuring the incorporation of other disciplines' input.</li> <li >Conduct site visits to verify conditions and perform markup drawings or as-built activities.</li> <li >Manage the submission of deliverables, including required quality checks and proper record management.</li> <li >Prepare technical reports and presentations.</li> <li >Conduct technical bid evaluations, vendor document reviews, and subcontract scope management.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >Over <strong >10 years of proven field engineering experience</strong> in site-based or project environments.</li> <li >Strong understanding of engineering, construction, and field operations within industrial or mining projects.</li> <li >Full knowledge of Aramco, Sabic, Royal Commission, SBC, and HCIS standards.</li> </ul> <h3 >Work Environment and Project Scope</h3> <p >This role is integral to the development of a new gold mine and processing facility, requiring a strong presence at a remote site in Saudi Arabia. The Senior Site Structural Engineer will operate within a dynamic project environment, focusing on industrial and mining sector challenges. The position demands practical field engineering experience and a comprehensive understanding of site-based operations.</p> <h3 >Application</h3> <p >Candidates meeting the specified qualifications are encouraged to apply.</p>

<p>Responsible for structural/infrastructure works including different building construction types, building design, equipment foundation design, pipe and cable tray support design. Originate new and revise existing engineering deliverables. Revise and check engineering deliverables against company procedures, standards, and checklists. Supervise engineering work being produced by juniors. Conduct and receive trainings related to job as required. Planning and completion of work within allocated man-hours effectively and plan work to avoid slippage. Interfaces, coordinates and communicate effectively with the Project Manager and other team members. Delegation and distribution work as well as manage billability of team. Coordinates with all disciplines (as necessary) in the preparation and development of the deliverables and ensure that other disciplines input are incorporated. Go for site visits and verify site conditions and markup drawings/perform as-built activities. Manage deliverables submission with required quality checks and proper management of record. Technical report writing and preparation of presentations. Full knowledge of Aramco, Sabic, Royal commission, SBC and HCIS standards. Technical bid evaluation, Vendor document review and subcontract scope management</p><p><strong>Desired Candidate Profile</strong></p><p>Degree in Civil, Structural Engineering Minimum experience: 15 years or more. Preferably experienced within the mining industry. Proven field engineering experience in site-based/project environments. Strong understanding of engineering, construction, and field operations within industrial or mining projects</p>

<ul><li><p><strong>Engineering Leadership:</strong> Lead and manage multi-disciplinary engineering teams (Civil, Mechanical, Pipeline, Piping, Electrical, and Instrumentation) to ensure seamless technical execution across all project phases.</p></li><li><p><strong>Field Instrumentation Leadership:</strong> Direct all site instrumentation execution, installation, and field engineering activities across pipeline routes, valve stations, and scraper launchers/receivers.</p></li><li><p><strong>Design & Technical Review:</strong> Review and validate instrumentation design packages, hook-up drawings, loop diagrams, cable schedules, and material submittals against Saudi Aramco standards.</p></li><li><p><strong>Aramco Standards Compliance:</strong> Ensure strict adherence to Saudi Aramco Engineering Standards (SAES-J series), SAMSS, standard drawings, and international codes (ISA, IEC, IEEE).</p></li><li><p><strong>System Integration & Testing:</strong> Lead loop checking, calibration, pre-commissioning, and testing of field transmitters, motorized control valves (MOVs), ESD systems, and SCADA interfaces.</p></li><li><p><strong>Vendor & Material Management: </strong>Conduct Technical Bid Evaluations (TBEs), review vendor documentation, and manage Factory Acceptance Testing (FAT) / Site Acceptance Testing (SAT) for critical control instrumentation.</p></li><li><p><strong>Cross-Functional Interface:</strong> Coordinate directly with Mechanical, Piping, E&I, and Civil teams to ensure seamless interface integration for instrument tapping points, impulse piping, and control cabling.</p></li><li><p><strong>Client & Inspector Liaison:</strong> Work closely with Saudi Aramco PMT, PID, and CSD engineers to clear Technical Queries (TQIs), inspect field installations, and secure site sign-offs.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong><u>Skills and Characteristics:</u></strong></p><ul><li><p><strong>Technical Mastery:</strong> In-depth knowledge of pipeline automation, fiber optic leak detection integration, pressure control stations, cathodic protection monitoring, and ESD system design.</p></li><li><p><strong>Problem Solving:</strong> Superior technical troubleshooting capabilities during installation, loop checking, and field commissioning phases.</p></li><li><p><strong>Execution & Detail Focus:</strong> Strong commitment to precision in field installation details, hazardous area classification compliance, and instrument hook-up accuracy.</p></li></ul><p>&nbsp;<strong>Communication:</strong> Clear verbal and written reporting capabilities to articulate technical issues, write field inspection reports, and coordinate effectively with client</p>

<p>We have an urgent requirement for the following position in Saudi Arabia . Position: E&amp;I Estimation Engineer Location: Dammam, Saudi Arabia Salary: Basic SAR 6,500 7,500 (Based on experience) Job Responsibilities: Review ITB, RFQ, RFP, scope of work, specifications, BOQs, drawings, and tender documents. Prepare Material Take-Offs (MTOs), BOQs, quantity take-offs, and detailed cost estimates. Estimate manpower, materials, equipment, subcontractor costs, logistics, testing &amp; commissioning, and temporary facilities. Prepare techno-commercial proposals, compliance statements, assumptions, exclusions, and bid documentation. Evaluate quotations from vendors and subcontractors. Coordinate with Engineering, Procurement, Planning, QA/QC, and Clients during the tendering process. Prepare technical clarification requests (TQs) and incorporate client responses into estimates. Support post-bid clarifications, negotiations, and project handover activities.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Technical Experience Required:</strong></p><ul><li>Electrical Power Distribution MCC, Switchgear &amp; Transformers</li><li>UPS, Battery Chargers &amp; DC Systems</li><li>Lighting, Earthing &amp; Lightning Protection</li><li>Instrumentation &amp; Field Devices</li><li>DCS, PLC, SIS, RTU &amp; SCADA Systems</li><li>Fire &amp; Gas Detection Systems</li><li>Fiber Optic (FOC), CCTV, Access Control &amp; PAGA Systems</li><li>Cable Tray, Conduit &amp; Cable Installation</li></ul><p><strong>Job requirements</strong></p><ul><li>Bachelor's Degree in Electrical / Instrumentation Engineering.</li><li>Minimum 5 years of experience in E&amp;I Estimation / Proposal Engineering.</li><li>Experience in EPC, Brownfield, Greenfield, Shutdown, or Maintenance projects.</li><li>Strong knowledge of MTO, BOQ, Cost Estimation, Techno-Commercial Proposals, and Tendering.</li><li>Experience with Saudi Aramco, SABIC, or SEC projects will be an added advantage.</li></ul>

<h3 >About the Role</h3> <p >Vivint is seeking a <strong >Field Service Professional</strong> to join its team in Al Khafji, Eastern, Saudi Arabia. This full-time role involves installing smart home technology, providing customer education, and identifying opportunities for system upgrades. Candidates with 0-1 years of experience are encouraged to apply for this position, which offers a competitive hourly base salary along with uncapped commission and incentives.</p> <h3 >Company Overview</h3> <p >Vivint Smart Home, an NRG owned company, is a leading smart home provider dedicated to enhancing the home experience through intelligent products and services. The company focuses on proactively protecting customers and keeping them connected to their homes. Vivint has been recognized as one of Forbes’ World’s 50 Most Innovative Companies.</p> <h3 >Core Responsibilities</h3> <ul > <li >Install, service, and troubleshoot security cameras, smart locks, and home automation systems.</li> <li >Evaluate customer homes to recommend and sell equipment upgrades or service enhancements on-site.</li> <li >Educate homeowners on the proper use of their new smart home systems.</li> <li >Participate in consistent coaching and leadership training for professional development within the organization.</li> </ul> <h3 >Candidate Profile and Requirements</h3> <ul > <li >Experience: 0-1 years required.</li> <li >A <strong >Sales Mindset</strong>: Experience in retail, B2C sales, insurance, or service-based sales is a significant advantage.</li> <li ><strong >Customer-First Attitude</strong>: Demonstrated ability to act with integrity and build rapport with diverse customers.</li> <li ><strong >Technical Aptitude</strong>: Prior experience in cable/satellite installation, pest control, construction, or solar is beneficial but not mandatory.</li> <li >Possession of a valid driver’s license and a good driving record.</li> <li >Ability to successfully pass a post-offer background investigation and meet all applicable licensing requirements.</li> </ul> <h3 >Physical Demands</h3> <ul > <li >Ability to lift and carry up to 45 lbs.</li> <li >Capability to climb ladders up to 14 feet, including carrying tools while adhering to company-approved ladder weight capacity requirements (*, 375 lbs).</li> <li >Comfortable working in confined spaces, such as attics.</li> <li >Ability to bend, kneel, and stand for extended periods.</li> </ul> <h3 >Compensation</h3> <p >This role offers a competitive hourly base salary, complemented by uncapped commission and incentives based on performance.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>SDEC is one of the leading equipment distributors and custom industrial equipment solution provider. SDEC has a dynamic portfolio of products which is determined by the needs of our customers. SDEC culture is characterized by high customer orientation with a long-term view of relationships. We are inviting applications from candidates who have experience working as Procurement Engineer. Job Purpose: To ensure Technically, Commercially, timely and cost-effective procurement of electrical, mechanical, and fabrication materials required for switchgear manufacturing. The Procurement Engineer will evaluate suppliers, negotiate prices, manage purchase orders, and coordinate with engineering and production teams to maintain smooth material flow and meet project deadlines. Main Responsibilities Procurement &amp; Sourcing: Identify, evaluate, and select OEM and qualified suppliers for switchgear components, circuit breakers, contactors, relays, busbars, sheet metal, gaskets, copper bars, etc. Prepare and process purchase requisitions and purchase orders in line with project requirements Source new vendors and materials to optimize cost, quality, and delivery performance Negotiate pricing, terms, and lead times with suppliers to achieve cost savings Maintain approved vendor lists and ensure supplier qualification compliance Coordination with Internal Departments: Work closely with the Estimation, design, production, Warehouse and quality teams to understand technical requirements Coordinate with stores and plan to maintain adequate stock levels Support the engineering department in material substitution or alternate sourcing Material Planning &amp; Control: Monitor material delivery schedules and ensure timely availability for production Track and resolve discrepancies related to materials, quality, or delivery delays Follow up on pending orders and expedite deliveries when required Documentation &amp; Compliance: Prepare RFQs, purchase orders, comparison sheets, and supplier performance reports Ensure all materials comply with company quality standards and project specifications Maintain procurement documentation as per ISO / QA-QC procedures Cost Optimization &amp; Supplier Development: Analyse cost trends and develop strategies for cost reduction Evaluate supplier performance on quality, cost, and delivery metrics Participate in supplier audits and development programs HSE Responsibilities Adhere to follow all company Quality, Health, Safety, And Environmental (QHSE) policies, procedures, and legal requirements. Promptly identify and report unsafe conditions, incidents, and near misses to the appropriate supervisor or QHSE team. Attend and actively participate in mandatory Safety inductions, HSE trainings, safety meetings, emergency drills and root cause investigations. Follow established emergency response procedures, including evacuation plans, fire response, and first aid if trained. Follow protocols to minimize environmental impact, including proper waste disposal and reporting spills or leaks. Provide suggestions to enhance Quality, Health, Safety and Environmental procedures and take responsibility and initiatives for continual improvement.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in electrical engineering or equivalent.</li><li>3-6 years of experience in procurement within switchgear or electrical manufacturing industry.</li><li>Knowledge of LV/MV switchgear products such as ABB, Hyundai, Schneider, Siemens.</li><li>Years of relevant experience: 0-3</li></ul><p></p></section>

<h3 >About Penspen and the Opportunity</h3> <p >Penspen, a leading energy services company with over 70 years of global experience, provides engineering, project management, asset management, and integrity services to the energy industry worldwide. Originally founded in the UK in 1954, the company has grown to include almost 1,000 staff members across major offices globally. Penspen is currently seeking a <strong >Senior Instrument Engineer</strong> for a full-time position based in <strong >Khafji, Eastern Province, Saudi Arabia</strong>.</p> <h3 >Role Purpose and Team Integration</h3> <p >The Senior Instrument Engineer will operate within either the Core Engineering Team or a Project Management Team (PMT) project environment. This role may involve having engineer-grade instrument personnel under their direct responsibility, requiring control, management, and delegation of activities. The Senior Instrument Engineer may also work under the supervision of a Lead Instrument Engineer, performing responsibilities as delegated.</p> <h3 >Key Responsibilities</h3> <ul > <li >Provide day-to-day control of FEED engineers in the preparation of Control Block Diagrams and the identification of all field signals.</li> <li >Review and approve the design of Emergency Shutdown (ESD) and Fire and Gas Detection systems, including datasheets and specifications.</li> <li >Deliver timely comments on FEED deliverables and ensure their effective resolution and implementation.</li> <li >Review and approve all relevant drawings, including cable trays (above and underground), junction box locations, and cabling.</li> <li >Evaluate and approve vendor drawings and other submissions.</li> </ul> <h3 >Essential Qualifications and Experience</h3> <ul > <li >A Bachelor’s Degree in Instrumentation &amp; Control Engineering, Electrical Engineering, Electronic Engineering, or Mechanical Engineering.</li> <li >A minimum of <strong >Twelve (12) years of total experience</strong>, with at least <strong >Six (6) years specifically within Instrumentation &amp; Control Engineering</strong> for major Oil and Gas or Petrochemical projects.</li> <li >Required experience with Distributed Control Systems (DCS).</li> </ul> <h3 >Preferred Skills and Knowledge</h3> <ul > <li >Preferable PMC (Project Management Consultancy) experience in a similar role for several years.</li> <li >Beneficial knowledge of Saudi Aramco Desktop Standard and associated procedures/practices.</li> <li >Previous exposure to construction and commissioning phases of projects is beneficial.</li> <li >Computer literate with proficiency in all Microsoft Office Packages, particularly Word and Excel.</li> </ul> <h3 >Application Information</h3> <p >Qualified candidates are invited to apply for this Senior Instrument Engineer position in Khafji, Saudi Arabia. This is a full-time role within Penspen's dynamic engineering team.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Fabricate and install <strong>Solid Surface (Corian), Artificial Marble, Quartz, and Natural Stone</strong> products with exceptional craftsmanship.</p></li><li><p>Manufacture custom <strong>washbasins, vanity tops, countertops, worktops, reception counters, and decorative elements</strong>.</p></li><li><p>Read and accurately interpret <strong>shop drawings, fabrication drawings, and technical specifications</strong>.</p></li><li><p>Perform <strong>cutting, routing, bonding, thermoforming, edge profiling, sanding, polishing, and finishing</strong> to the highest quality standards.</p></li><li><p>Fabricate and install <strong>integrated sinks</strong> using seamless joint techniques (Invisible Seams).</p></li><li><p>Operate fabrication machinery and workshop equipment safely and efficiently, including routers, polishing machines, edge tools, and CNC machines,vacuum forming,Hydraulic Press (preferred).</p></li><li><p>Inspect products throughout the fabrication process and ensure premium-quality finishing before delivery.</p></li><li><p>Troubleshoot fabrication issues and recommend practical solutions to improve quality and productivity.</p></li><li><p>Train, mentor, and support junior fabricators and workshop technicians.</p></li><li><p>Maintain a clean, organized, and safe workshop while following all health and safety procedures.</p></li><li><p>Continuously suggest improvements in fabrication methods, tooling, workflow, and production efficiency.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum <strong>5 years of hands-on experience</strong> in <strong>Solid Surface (Corian), Quartz, Artificial Marble, or Natural Stone fabrication</strong>.</p></li><li><p>Proven experience in manufacturing <strong>custom washbasins, vanity tops, countertops, and integrated sinks</strong>.</p></li><li><p>Strong knowledge of <strong>thermoforming, seamless jointing, polishing, finishing, and repair techniques</strong>.</p></li><li><p>Ability to read and execute <strong>shop drawings and technical drawings</strong> accurately.</p></li><li><p>Experience operating <strong>routers, polishing machines, seam setters, thermoforming equipment</strong>, and <strong>CNC machines</strong> is highly preferred.</p></li><li><p>Strong attention to detail with a commitment to premium-quality workmanship.</p></li><li><p>Ability to work independently and lead a small fabrication team when required.</p></li><li><p>Experience in the <strong>GCC</strong> is an advantage.</p></li><li><p>Positive attitude, reliability, and willingness to continuously improve fabrication quality and workshop performance.</p></li></ul><p></p></section>

<div><span style="font-size: 11px;"><b>Key Responsibilities</b></span></div><div><span style="font-size: 11px;"><b><br></b></span></div><div><span style="font-size: 11px;"><b>Bid &amp; Order Management</b></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Manage bid and order execution for Medium Voltage Drive Systems and High Voltage Motors.</span></div><div><span style="font-size: 11px;">Lead the preparation of technical and commercial proposals, including participation in tenders and negotiations with customers.</span></div><div><span style="font-size: 11px;">Coordinate overall project planning, scheduling, and execution while monitoring milestones and budgets.</span></div><div><span style="font-size: 11px;">Ensure adherence to project management standards, quality guidelines, EHS requirements, and regulatory compliance.</span></div><div><span style="font-size: 11px;"><b>Technical &amp; Commercial Consulting</b></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Act as a technical and application expert supporting the regional sales organization and customers.</span></div><div><span style="font-size: 11px;">Analyze customer requirements and develop optimal technical and commercial solutions.</span></div><div><span style="font-size: 11px;">Provide consulting support to Regional Sales Managers and Key Account Managers during customer engagements.</span></div><div><span style="font-size: 11px;">Support contract negotiations with technical and commercial insights.</span></div><div><span style="font-size: 11px;">Customer &amp; Market Development</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Build strong relationships with key customers and strategic accounts.</span></div><div><span style="font-size: 11px;">Identify new business opportunities and support the growth of Medium Voltage Drives and High Voltage Motors across assigned markets.</span></div><div><span style="font-size: 11px;">Increase market transparency by monitoring industry trends and competitive developments.</span></div><div><span style="font-size: 11px;">Collaboration &amp; Stakeholder Management</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Maintain effective communication with customers, partners, and internal teams.</span></div><div><span style="font-size: 11px;">Coordinate cross-functional teams including engineering, sales, and project execution.</span></div><div><span style="font-size: 11px;">Establish and lead expert teams to support complex project opportunities and consulting initiatives.</span></div><div><span style="font-size: 11px;">Your Profile – Digital and Solid</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Bachelor’s Degree in Electrical, Electronics, or Industrial Engineering</span></div><div><span style="font-size: 11px;">(MBA is an advantage)</span></div><div><span style="font-size: 11px;">8–10+ years of experience in Medium Voltage Motors and Drive Systems applications within sales, project management, or business development</span></div><div><span style="font-size: 11px;">Experience working in industrial sectors such as Oil &amp; Gas, Petrochemical, Power, Water, Metals, Mining, or Infrastructure</span></div><div><span style="font-size: 11px;">Strong technical understanding of MV drives and HV motors systems</span></div><div><span style="font-size: 11px;">Experience with CRM tools such as Salesforce, Microsoft Dynamics 365.</span></div><div><span style="font-size: 11px;">Experience with MS Office Tools especially advanced Excel skills, PowerPoint, Visio and MS Projects</span></div><div><span style="font-size: 11px;">Demonstrated business and financial acumen</span></div><div><span style="font-size: 11px;">Exceptional negotiation, communication, and presentation skills</span></div><div><span style="font-size: 11px;">Ability to combine strategic thinking with detailed execution</span></div><div><span style="font-size: 11px;">Comfortable presenting to senior management and C-level stakeholders</span></div><div><span style="font-size: 11px;">Strong team collaboration and leadership mindset</span></div><div><br></div><div><br></div><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s Degree in Electrical, Electronics, or Industrial Engineering (MBA is an advantage)</p><p>8 10+ years of experience in Medium Voltage Motors and Drive Systems applications within sales, project management, or business development</p><p>Experience working in industrial sectors such as Oil &amp; Gas, Petrochemical, Power, Water, Metals, Mining, or Infrastructure</p><p>Strong technical understanding of MV drives and HV motors systems</p><p>Experience with CRM tools such as Salesforce, Microsoft Dynamics 365.</p><p>Experience with MS Office Tools especially advanced Excel skills, PowerPoint, Visio and MS Projects</p><p>Demonstrated business and financial acumen</p><p>Exceptional negotiation, communication, and presentation skills</p><p>Ability to combine strategic thinking with detailed execution</p><p>Comfortable presenting to senior management and C-level stakeholders</p><p>Strong team collaboration and leadership mindset</p><p>Willingness to travel nationally and internationally</p><p>Fluent English communication skills (Arabic is an advantage)</p>

<h3 >Company Overview and Role Summary</h3> <p >Innomotics is a global leader in motion technology, with a trusted engineering legacy spanning over 150 years. Headquartered in Nuremberg, Germany, the company operates in nearly 50 countries, employing approximately 15,000 people worldwide. Innomotics provides motors, drives, systems, services, and digital solutions that support critical industries globally, focusing on increasing efficiency, accelerating electrification, improving sustainability, and reducing carbon footprints. Innomotics, Saudi Arabia, is seeking an experienced <strong >Project Manager &amp; Professional Expert for Medium Voltage Drive Systems and High Voltage Motors</strong> to join the team in Al Khobar, Eastern region. This full-time role focuses on driving business growth and delivering technical and commercial excellence in complex industrial projects.</p> <h3 >Project Management and Bid Execution</h3> <ul > <li >Manage bid and order execution processes for Medium Voltage Drive Systems and High Voltage Motors.</li> <li >Lead the preparation of technical and commercial proposals, including participation in tenders and customer negotiations.</li> <li >Coordinate overall project planning, scheduling, and execution, with continuous monitoring of milestones and budgets.</li> <li >Ensure adherence to established project management standards, quality guidelines, EHS requirements, and regulatory compliance.</li> </ul> <h3 >Technical Consulting and Market Development</h3> <ul > <li >Act as a technical and application expert, providing support to the regional sales organization and customers.</li> <li >Analyze customer requirements to develop optimal technical and commercial solutions.</li> <li >Offer consulting support to Regional Sales Managers and Key Account Managers during customer engagements.</li> <li >Support contract negotiations by providing technical and commercial insights.</li> <li >Build and maintain strong relationships with key customers and strategic accounts.</li> <li >Identify new business opportunities and support the growth of Medium Voltage Drives and High Voltage Motors across assigned markets.</li> <li >Increase market transparency through monitoring industry trends and competitive developments.</li> <li >Maintain effective communication with customers, partners, and internal teams.</li> <li >Coordinate cross-functional teams, including engineering, sales, and project execution.</li> <li >Establish and lead expert teams to support complex project opportunities and consulting initiatives.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >8–10+ years of experience in Medium Voltage Motors and Drive Systems applications within sales, project management, or business development.</li> <li >Experience working in industrial sectors such as Oil &amp; Gas, Petrochemical, Power, Water, Metals, Mining, or Infrastructure.</li> <li >Demonstrated business and financial acumen.</li> </ul> <h3 >Skills and Attributes</h3> <ul > <li >Exceptional negotiation, communication, and presentation skills.</li> <li >Ability to combine strategic thinking with detailed execution.</li> <li >Comfortable presenting to senior management and C-level stakeholders.</li> <li >Strong team collaboration and leadership mindset.</li> <li >Willingness to travel nationally and internationally.</li> </ul> <h3 >Working at Innomotics</h3> <p >Innomotics is committed to diversity, equity, and inclusion, welcoming applications from all qualified candidates. The company is a global technology powerhouse focused on creating sustainable and innovative motion solutions that power industries and economies worldwide. This role offers an opportunity to make a significant impact by contributing commercial credibility, entrepreneurial drive, and strategic vision to advance Innomotics' strategy in the Middle East.</p>

<h3 >About Lantern Systems Co. Ltd and the Role</h3> <p >Lantern Systems Co. Ltd is seeking a qualified <strong >Project Support Engineer</strong> to join our team in Al Khobar, Eastern region. This is a full-time position designed for professionals with 2-5 years of relevant experience who are ready to contribute to critical communication and low-current system projects within our dynamic environment.</p> <h3 >Role Purpose and Contribution</h3> <p >The primary purpose of this role is to provide essential technical and coordination support across various communication and low-current system projects. The Project Support Engineer will play a crucial part in ensuring design compliance, maintaining documentation accuracy, facilitating timely procurement processes, and contributing to the smooth and efficient execution of projects from inception to completion.</p> <h3 >Key Responsibilities</h3> <ul > <li >Support the preparation and review of technical submittals, including those related to Data, Telecom, CCTV, and Access Control systems.</li> <li >Assist in design coordination efforts with multidisciplinary teams, specifically Electrical and Security departments.</li> <li >Prepare detailed shop drawings, as-built drawings, and accurate material take-offs for project requirements.</li> <li >Review technical documents provided by vendors to ensure full compliance with established project specifications.</li> <li >Provide support in the preparation of Bills of Quantity (BOQ).</li> <li >Coordinate effectively with the procurement department for technical clarifications and necessary approvals.</li> <li >Monitor the flow and status of project design documentation to ensure efficiency and adherence to timelines.</li> <li >Offer technical clarifications and support to the site team as and when required during project execution.</li> <li >Assist in the preparation of testing, commissioning documentation, and comprehensive handover dossiers.</li> <li >Ensure all project activities and deliverables comply with client standards and directives where applicable.</li> </ul> <h3 >Required Experience</h3> <p >Candidates for this Project Support Engineer position should possess <strong >2 to 5 years of professional experience</strong> in a related field, demonstrating a solid understanding of communication and low-current systems. This experience should ideally include involvement in technical support, design coordination, and project documentation within a project-based environment.</p> <h3 >Work Setting</h3> <p >This is a <strong >full-time</strong> role based in <strong >Al Khobar, Eastern</strong> region. The successful candidate will work within a project-focused environment, collaborating with various internal and external stakeholders to achieve project objectives and ensure successful project delivery.</p> <h3 >Application Process</h3> <p >We invite qualified candidates who meet the specified experience requirements to apply. Further details regarding the application process will be provided upon initial contact.</p>