Engineering Jobs in Saudi

<p>Perform technical tasks assigned by Project Commissioning and Operation Lead, related to the preparation of the pre-commissioning, commissioning, start up, test run, training and operation activities. Interface with engineering disciplines, licensors, vendors and subcontractors. Execute design activities relevant to QA and QC Certification, Fire Fighting System response and control, HSE system control, Integrated Control System development, Production Strategies development, Products Marketing Analysis, Maintainability and Inspection Criteria and Spare Parts Reliability for cost effective and safe operation in the relevant field of interest. Provide engineering support when required Maintain continuous review of the Production Facilities operations</p><p>Ensure that all activities under his responsibility are done in full compliance with the HSE requirements Provide support during Pre Start-up Safety Reviews (PSSR) meetings, HSE meetings, etc. Perform frequent safety and quality observations in the field and report findings Provide support during the preparation of the progress reports Provide support during the execution of the Pre-Commissioning, Commissioning &amp; Start-up activities Identify solutions to technical problems encountered during operations, which cannot be readily resolved by the operations team on board, including also the related HSE issues. Coordinate root cause analysis investigations and prepare relevant reports for operational issues which affects the HSE, the systems availability and the production Develop transfer of knowledge and relevant solutions (e.g., feedbacks on solutions assessing/developing how to implement the same solution on the other vessels) Along the entire operations life of Production Facilities, provide technical overview of production activities, recommending solutions aimed to guarantee targets achievement, facilitating information exchange and coordinating/optimizing production resources Provide technical coordination of operational issues with respect to Corporate Engineering and Procurement departments Together with Asset Maintenance dept. prepare and manage planning minimum shut down maintenance (budget, manning, materials, etc.) Management of change coordination of any change made to the Production Facilities original design after commissioning and handing over to operations team Management of change coordination of the entire process of design change of process/equipment onboard, provide technical support, changes requirements (i.e. HAZID, HAZOP, Risk Assessment) in conjunction with the HSE Dept. During bidding phase of a project, provide technical assistance to Proposal Manager as necessary, to ensure that all operational aspects are considered During the project execution phase of a new leased Production Facility, provides technical assistance to the Pre-Operations Manager and team on the project as requested Smooth transition between Comm and Ops At the time of commissioning and Operations start up of a new leased Production Facility, provide continuous technical assistance to ensure a smooth transition from the commissioning team, deliverables, activities (punch lists, marked-up engineering documents, energized and commissioned systems, etc.) to the commencement of normal operations activities Review and comment operating manual and procedures Redmark and keep updated engineering documentations as required during comms and ops Participate in regular updating procedures and standards to ensure that operations experience on existing vessels is incorporated</p><p>Commissioning Engineering: Review HSE plan and procedures Review the test run procedure and operating manuals Provides support during the preparation of the Precommissioning, Commissioning and Start up plans and procedures including operating instructions, System Dossiers, etc. Participate to design reviews (e.g. HAZOP, 3D model, Commissionability review meetings, etc.) Review the commissioning spare parts list and consumables list Prepare the Purchase Requisitions (RdA) and Technical Evaluation falling within own sphere of responsibility</p><p>Commissioning Engineering: Review HSE plan and procedures Review the test run procedure and operating manuals Provides support during the preparation of the Precommissioning, Commissioning and Start up plans and procedures including operating instructions, System Dossiers, etc. Participate to design reviews (e.g. HAZOP, 3D model, Commissionability review meetings, etc.) Review the commissioning spare parts list and consumables list Prepare the Purchase Requisitions (RdA) and Technical Evaluation falling within own sphere of responsibility</p><p>Languages: English Language skills required (and any other specified by Project)</p><p><strong>Desired Candidate Profile</strong></p><p>We are looking for a Commissioning Engineer to join one of our onshore projects in Saudi Arabia. Project: Juaymah Plant Location: Ras Tanura, Estern Province of Saudi Arabia Start date: ASAP Contract Duration: 6 Months (renewable)</p>

<p>Since our founding, IDEMIA has been on a mission to unlock the world and make it safer through our cutting-edge identity technologies. Our technology leadership makes us the partner of choice for hundreds of governments and thousands of enterprises in over 180 countries, including some of the biggest and most influential brands in the world. In applying our unique expertise in biometrics and cryptography , we enable our clients to unlock simpler and safer ways to pay, connect, access, identify, travel and protect public places at scale and in total security. Our teams work from 5 continents and speak 100+ different languages. We strongly believe that our diversity is a key driver of innovation and performance.</p><p>Purpose</p><p>We are looking for a customer-focused Integration Engineer / Pre Sales Engineer to join our growing team in Riyadh, Saudi Arabia. This role combines technical expertise, solution design and customer engagement, supporting the full sales lifecycle from initial customer discussions through to proof of concepts, demonstrations and solution delivery.Working closely with Sales, Product Management, Partners and System Integrators, you will act as a trusted technical advisor, helping customers understand how IDEMIA solutions can meet their operational and business requirements. This role requires previous experience within biometrics, identity management, physical access control or security solutions, together with native or fluent Arabic and strong English communication skills.</p><p>Key Missions</p><ul><li>Support the Regional Sales Director during customer meetings and business development activities</li><li>Deliver technical presentations, workshops and demonstrations of IDEMIA solutions</li><li>Answer customer technical questions and articulate IDEMIA s key differentiators</li><li>Lead technical discovery sessions to understand customer requirements and business challenges</li><li>Support Proof of Concept (POC) activities from planning through to completion</li><li>Configure and deploy IDEMIA products and solutions for demonstrations and POCs</li><li>Act as the primary technical contact for customers, partners and system integrators during evaluations and POCs</li><li>Define solution architectures and recommend the most suitable products and services to meet customer requirements</li><li>Prepare technical documentation, solution designs and customer presentations</li><li>Work closely with Product Management to communicate customer feedback and market requirements</li><li>Monitor competitor activity and industry trends and provide recommendations for product evolution</li><li>Collaborate with Engineering, Product, Support and Sales teams to resolve technical issues</li><li>Support project handover activities where required</li><li>Provide accurate weekly and monthly activity reporting</li><li>Travel across Saudi Arabia and the wider Middle East region as required</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>5+ years of experience in a customer-facing technical, integration, pre-sales or solutions engineering role</li><li>Bachelor's degree in Computer Science, Information Technology, Electronics Engineering or a related discipline</li><li>Experience working with biometric technologies, identity management, physical access control or security solutions</li><li>Experience supporting customer demonstrations, technical workshops, proof of concepts (POCs) and solution design activities</li><li>Strong understanding of solution architecture, systems integration principles and enterprise infrastructure environments</li><li>Experience working within government, airport, transportation, public security or critical infrastructure environments is highly desirable</li><li>Excellent troubleshooting, analytical and problem-solving skills</li><li>Strong communication, presentation and stakeholder management skills, with the ability to engage both technical and non-technical audiences</li><li>Experience working collaboratively with customers, partners and system integrators</li></ul>

<p>Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International s founders established a simple yet powerful formula: Approach each client engagement as a partnership , create an environment that attracts the most talented professionals and allows them to flourish, and regulate growth to maintain excellence in our service standards. Role Overview We are seeking a site-based CSA Site Engineer to supervise and verify civil, structural, and architectural works on data center projects. The role focuses on construction quality, compliance, technical coordination, progress monitoring, and handover support within mission-critical environments. The ideal candidate will have strong CSA site supervision experience and the ability to coordinate effectively with contractors, consultants, MEP, ICT, and commissioning teams. Key Responsibilities Monitor and inspect contractor execution of civil, structural, and architectural works. Verify compliance with drawings, specifications, approved materials, and project standards. Oversee concrete, steel, masonry, finishes, waterproofing, access flooring, and architectural fit-out works. Review shop drawings, IFC drawings, material submittals, method statements, and ITPs. Coordinate CSA works with MEP, ICT, commissioning, and other project disciplines. Track progress and flag risks related to sequencing, access, constructability, and quality. Support inspections, testing, mock-ups, and quality verification activities. Report CSA-specific issues, progress updates, and risks to project leadership. Verify completed works and support contractor payment validation when required. Support snagging, punch list closure, as-built review, and handover documentation. Attend coordination and technical meetings with project stakeholders. Ensure contractor compliance with safety, quality, and project procedures.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in Civil Engineering, Structural Engineering, Construction Engineering , or a related discipline. Strong experience in CSA site supervision and inspection. Solid knowledge of civil, structural, and architectural execution in high-specification construction environments. Experience reviewing shop drawings, method statements, material submittals, and ITPs. QA/QC awareness for structural and architectural works. Ability to monitor contractors, verify compliance, and report progress accurately. Strong coordination skills across CSA, MEP, ICT, and commissioning interfaces. Good understanding of sequencing, constructability, access, and site quality risks. Data center or mission-critical project exposure. Hyperscale or colocation facility experience. GCC project experience. Experience with tolerance-sensitive construction. Familiarity with raised floors, equipment plinths, dry finishes, fire-rated partitions, and ceiling coordination. Experience in phased handover or live project environments. Familiarity with Aconex, Procore, AutoCAD, or drawing review tools.</p>

Company Description: Fadras Group is a leading company in the construction industry in the Kingdom of Saudi Arabia, specializing in durable, high-performance expansion joint systems.<br>Fadras Group focuses on locally manufactured products that meet stringent quality standards and project-specific requirements. The organization offers competitive delivery times and strong supply capabilities, supporting complex construction projects across the region. Join a growing, performance-driven team that values innovation and customer satisfaction.<br>Role Description: The Technical Sales Engineer is a full-time, on-site role based in Riyadh, Saudi Arabia. This role involves identifying and engaging potential clients, presenting technical solutions, and promoting Fadras Group’s expansion joint systems to contractors, consultants, and project owners. Key Responsibilities<br>Identify and develop new clients and business opportunities. Prepare and submit technical submittals, material submittals, method statements, and product data sheets. Build and maintain strong, long-term relationships with existing customers. Follow up on approvals and maintain a clear tracking system for all submissions. Provide pre-sales technical support and assist customers with product information and solutions. Prepare, submit, and follow up on price quotations and commercial offers. Achieve assigned sales targets and KPIs. Manage payment follow-up and support the collection process. Conduct customer visits and support the sales team in promoting company products. Follow up on customer inquiries, offers, and project requirements.<br><br>Qualifications<br>Bachelor’s degree in Engineering (civil, mechanical, or related field) or an equivalent technical discipline.5 years of experience in construction materials, metal works, expansion joints, bridge bearings, or related products. Candidates should possess effective Communication and Sales skills to build relationships, negotiate, and close opportunities. Experience in construction materials, building systems, or infrastructure projects in KSA or the GCC region is highly beneficial. Ability to read and interpret technical drawings, specifications, and project documents. Proficiency in MS Office and CRM tools, with strong organizational and reporting skills. Fluency in English is required; Arabic language skills are an advantage. Valid driving license and willingness to conduct regular client and site visits within Riyadh and other regions as needed.

Job Overview:The Site Civil Engineer will play a key role in the planning, design, and execution of residential real estate development projects. This position is responsible for overseeing on-site civil engineering activities, ensuring compliance with approved plans, coordinating with contractors and consultants, and supporting project delivery from land development through vertical construction. The ideal candidate has experience in residential subdivisions, infrastructure development, and site work management.<br>Key Responsibilities:Ensure site work adheres to approved civil drawings, local building codes, environmental regulations, and project specifications. Conduct regular site inspections and resolve technical issues related to earthworks, utilities, drainage, and foundations. Work closely with general contractors, subcontractors, surveyors, and municipal inspectors to maintain project progress and quality. Communicate site progress, risks, and solutions to project managers and development leadership. Prepare daily/weekly reports, site logs, redline drawings, and as-built documentation.<br>Requirements:Bachelor’s degree in civil engineering or related field1–5 years of experience in civil/site engineering, preferably within residential land development or construction. SCE Membership

<p><p class=\"MsoNormal\"><b><span style=\"font-family: Montserrat; mso-bidi-font-family: \'Lama Sans\'; color: #3c465a;\">Summary Role</span></b></p> <p class=\"MsoNormal\"><span style=\"font-family: Montserrat; mso-bidi-font-family: \'Lama Sans\'; color: #3c465a;\">We are seeking an experienced Piping Construction Engineer with active Saudi Aramco approval to oversee the execution, installation, and testing of piping systems for a major EPC project. The successful candidate will ensure that all site construction activities strictly adhere to project specifications, Saudi Aramco Engineering Standards (SAES), and international codes (ASME, API). This role requires strong field leadership, technical problem-solving, and seamless coordination with QA/QC, subcontractors, and multidisciplinary teams.</span></p> <p class=\"MsoNormal\"><b><span style=\"font-family: Montserrat; mso-bidi-font-family: \'Lama Sans\'; color: #3c465a;\">Key Responsibilities</span></b></p> <p class=\"MsoNormal\"><span style=\"font-family: Montserrat; mso-bidi-font-family: \'Lama Sans\'; color: #3c465a;\">&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Site Execution: Direct and supervise the daily field installation of above-ground (A/G) and underground (U/G) piping systems, including carbon steel, stainless steel, alloy, and non-metallic (GRE/FRP) piping.</span></p> <p class=\"MsoNormal\"><span style=\"font-family: Montserrat; mso-bidi-font-family: \'Lama Sans\'; color: #3c465a;\">&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Technical Review: Review and interpret P&amp;IDs, isometric drawings, piping layouts, material take-offs (MTOs), and 3D models (Navisworks) to resolve constructability issues prior to execution.</span></p> <p class=\"MsoNormal\"><span style=\"font-family: Montserrat; mso-bidi-font-family: \'Lama Sans\'; color: #3c465a;\">&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Compliance &amp; Standards: Ensure all piping construction complies with Saudi Aramco standards (SAES, SAMSS) and international codes (e.g., ASME B31.3, B31.4, B31.8, API).</span></p> <p class=\"MsoNormal\"><span style=\"font-family: Montserrat; mso-bidi-font-family: \'Lama Sans\'; color: #3c465a;\">&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; QA/QC Coordination: Work closely with the QA/QC department to ensure the successful implementation of the Inspection and Test Plan (ITP). Coordinate NDT activities (RT, PT, MT, UT) and resolve any non-conformance reports (NCRs).</span></p> <p class=\"MsoNormal\"><span style=\"font-family: Montserrat; mso-bidi-font-family: \'Lama Sans\'; color: #3c465a;\">&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Hydrotesting &amp; Handover: Oversee mechanical completion activities, prepare and review hydrotest/pneumatic test packages, and supervise flushing, blowing, and testing operations.</span></p> <p class=\"MsoNormal\"><span style=\"font-family: Montserrat; mso-bidi-font-family: \'Lama Sans\'; color: #3c465a;\">&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Subcontractor Management: Monitor subcontractor productivity, ensure safe work practices, and verify that manpower and equipment are utilized efficiently to meet project milestones.</span></p> <p class=\"MsoNormal\"><span style=\"font-family: Montserrat; mso-bidi-font-family: \'Lama Sans\'; color: #3c465a;\">&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Reporting: Prepare daily and weekly progress reports, track weld rejection rates, and flag any schedule delays or technical deviations to the Construction Manager.</span></p></p>

Role: Windows Infrastructure Engineer Job Summary:We are seeking a skilled Windows Infrastructure Engineer with strong experience in Windows Server, Active Directory, VMware/VCF, networking, automation, and enterprise infrastructure support. Key Responsibilities & Skills:Manage Windows Server, Active Directory, Group Policy, DNS, DHCP, and TCP/IP. Administer VMware and VCF virtualization environments. Use Power Shell for automation and system management. Troubleshoot complex Windows, hardware, software, and network issues. Manage backup, disaster recovery, patching, and security controls. Support enterprise platforms such as Exchange, Citrix, and SCCM. Address vulnerability assessment (VA) and compliance/remediation findings. Follow infrastructure security best practices and access controls. Maintain technical documentation and collaborate effectively with teams. Work in rotational shifts as required. Requirements:Strong analytical, troubleshooting, communication, and documentation skills with hands-on enterprise Windows infrastructure experience.

Company Description Federal Wave Contracting Company L. L. C. is an electromechanical contractor specializing in electrical, instrumentation, and mechanical projects and maintenance services. The company focuses on automation solutions using PLC, DCS, and SCADA systems, covering project execution, assembly, commissioning, and plant maintenance. In electrical works, Federal Wave handles low and medium voltage networks, providing installation, testing, commissioning, and maintenance services. The team also has expertise in UPS systems, ensuring reliable power solutions for industrial facilities. Applicants can expect to work in a technically advanced environment with exposure to complex automation and power systems. Role Description The Yoogawa DCS System Engineer is a contract, on-site role based in Jubail. The role involves configuring, programming, and maintaining Yokogawa DCS systems for industrial plants, including creating control strategies, logic, and graphics. Day-to-day tasks include participating in system design reviews, supporting installation and commissioning activities, troubleshooting system issues, and optimizing control performance. The engineer collaborates with project managers, instrumentation technicians, and electrical teams to ensure safe, reliable operation of process control systems. The role also includes preparing technical documentation, performing system backups, and assisting in upgrades or expansions of DCS and related automation infrastructure. Qualifications Strong experience with Yokogawa DCS systems, including configuration, programming, and commissioning. Knowledge of industrial automation platforms (PLC, SCADA) and integration with DCS environments. Understanding of electrical and instrumentation systems in low and medium voltage networks. Experience in testing, commissioning, and maintaining control and UPS systems in industrial settings. Bachelor’s degree in Electrical, Instrumentation, Control Engineering, or a related technical field. Ability to read and interpret P&IDs, control narratives, wiring diagrams, and engineering documentation. Proficiency in troubleshooting hardware and software issues in control systems and field instrumentation. Familiarity with industry standards and safety practices for process control and electrical works. Effective communication and collaboration skills for working with multidisciplinary project teams. Prior experience in oil & gas, petrochemical, or heavy industrial plants is highly beneficial.

<p>Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International s founders established a simple yet powerful formula: Approach each client engagement as a partnership , create an environment that attracts the most talented professionals and allows them to flourish, and regulate growth to maintain excellence in our service standards. Decima International is a professional services company providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across the industries we serve. We are seeking an experienced MEP Site Engineer to support the supervision and coordination of mechanical, electrical, plumbing, and cooling system installations for a major data center project. The role will monitor site works for compliance with approved drawings, specifications, and standards while supporting inspections, testing, commissioning, and interface coordination across project teams. The successful candidate will work closely with the Senior Construction Manager, contractors, consultants, commissioning teams, and other disciplines to ensure MEP works are completed safely, correctly, and in line with project requirements.</p><p>RESPONSIBILITIES</p><ul><li>Monitor MEP installation works to ensure compliance with approved drawings, specifications, method statements, and applicable standards.</li><li>Conduct regular site inspections and monitor workmanship, installation quality, and construction progress.</li><li>Witness inspections, testing, pre-commissioning, and commissioning activities for assigned MEP systems.</li><li>Review installation readiness and coordinate inspection requests with QA/QC teams.</li><li>Coordinate interfaces between MEP, CSA, commissioning, vendors, and contractor teams.</li><li>Monitor contractor progress, manpower, material availability, and work sequencing.</li><li>Identify installation deficiencies, clashes, incomplete works, and technical issues.</li><li>Report deficiencies, construction risks, and unresolved issues to the Senior Construction Manager.</li><li>Support resolution of technical queries, site issues, and coordination conflicts.</li><li>Review relevant shop drawings, technical submittmits, method statements, and installation documentation.</li><li>Verify that installed systems align with approved design intent and project requirements.</li><li>Support progress measurement and preparation of site status reports.</li><li>Coordinate with contractors and vendors to close punch list items and outstanding works.</li><li>Support system testing, energization, functional testing, and commissioning activities.</li><li>Ensure required inspection records, test results, and site documentation are properly maintained.</li><li>Participate in site coordination, technical, and construction progress meetings.</li><li>Support final system turnover, handover, and closeout documentation.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Mechanical Engineering, Electrical Engineering, Electromechanical Engineering, or a related discipline.</li><li>Relevant professional registration or certification.</li><li>Minimum 10 years of overall professional experience.</li><li>Minimum 8 years of relevant MEP construction or site engineering experience.</li><li>Minimum 6 years of experience on similar large-scale projects.</li><li>Strong experience in MEP installation and construction supervision.</li><li>Experience with cooling systems, electrical distribution, mechanical systems, plumbing, controls, or other mission-critical MEP infrastructure.</li><li>Strong knowledge of approved drawings, technical specifications, inspection requirements, and construction standards.</li><li>Experience witnessing inspections, testing, and commissioning activities.</li><li>Strong coordination skills across MEP, CSA, commissioning, QA/QC, and contractor teams.</li><li>Ability to identify construction deficiencies and communicate corrective requirements clearly.</li><li>Strong technical, organizational, communication, and problem-solving skills.</li><li>Saudi Council of Engineers (SCE) registration.</li><li>Experience on hyperscale data center or mission-critical projects.</li><li>Strong experience with data center cooling systems and critical MEP infrastructure.</li><li>Experience on industrial construction or complex infrastructure projects.</li><li>Familiarity with commissioning and integrated systems testing.</li><li>Experience working in KSA or the wider GCC region.</li><li>Familiarity with electronic inspection, reporting, and document management systems.</li></ul>

<h3 >About Alqimma Equipment Company</h3> <p >Alqimma Equipment Company is a firm operating within the Makkah region, with a presence in both Jeddah and Makkah. The company is seeking to expand its engineering team with a dedicated professional.</p> <h3 >The Role: Mechanical Manufacturing Engineer</h3> <p >We are looking for a <strong >Mechanical Manufacturing Engineer</strong> to join our team in a <strong >full-time</strong> capacity. This role is designed for an individual with foundational knowledge in mechanical engineering and manufacturing processes, ready to contribute to the company's operational objectives.</p> <h3 >Key Responsibilities</h3> <ul > <li >Assist in the design, development, and improvement of mechanical components and manufacturing processes.</li> <li >Support the optimization of production lines and equipment for efficiency and quality.</li> <li >Participate in the implementation of quality control measures and adherence to engineering standards.</li> <li >Contribute to troubleshooting and resolving technical issues that arise during manufacturing.</li> <li >Prepare and maintain technical documentation, reports, and specifications related to projects.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Bachelor's degree in Mechanical Engineering or a closely related field.</li> <li >0-1 years of professional experience in mechanical engineering, manufacturing, or a relevant industrial setting.</li> <li >Demonstrated understanding of mechanical design principles and manufacturing methodologies.</li> <li >Ability to work effectively within a team environment.</li> </ul> <h3 >Work Location</h3> <p >This full-time position is based within the Makkah region, with work locations including Jeddah and Makkah.</p> <h3 >Application Process</h3> <p >Interested candidates are encouraged to apply for this Mechanical Manufacturing Engineer position. Salary for this role will be discussed directly with qualified applicants during the interview process.</p>

<h3 >About the Role</h3> <p >Red Sea Gateway Terminal (RSGT) is seeking a <strong >Crane Electrical Engineer</strong> to join its team in Jeddah, Makkah, Saudi Arabia. This full-time position is crucial for ensuring the reliable operation of Quay Cranes (QC) and Yard Cranes (YC) through expert maintenance services. The role requires 2-5 years of relevant experience.</p> <h3 >Role Purpose and Objectives</h3> <p >The Crane Electrical Engineer will provide hands-on maintenance services for Quay Cranes and Yard Cranes. This involves planning, supervising, and controlling the work of an assigned team to achieve operational and departmental priorities. A core objective is to maintain the highest standards of safety, quality, productivity, and equipment reliability across all crane operations.</p> <h3 >Key Responsibilities</h3> <ul > <li >Diagnose, repair, and service electrical and control systems for cranes.</li> <li >Identify and classify electrical and electronic components.</li> <li >Read and interpret electrical drawings, schematics, and technical manuals.</li> <li >Operate, troubleshoot, and maintain generator sets.</li> <li >Plan and prepare materials, tools, and resources required for maintenance activities.</li> <li >Apply Health, Safety, and Environmental (HSE) rules and regulations diligently.</li> <li >Manage time, manpower, and maintenance resources effectively.</li> </ul> <h3 >Technical Competencies</h3> <ul > <li >Understanding of life cycles and failure modes of electrical and electronic components.</li> <li >Proficiency in medium-voltage electrical installations and power distribution systems.</li> <li >Skill in selecting and using electrical tools, testing instruments, and measuring devices.</li> <li >Ability to use computer-based diagnostic software for troubleshooting.</li> <li >Competency in PLC programming and troubleshooting.</li> <li >Experience with Variable Frequency Drive (VFD) programming and commissioning.</li> </ul> <h3 >General Skills and Experience</h3> <p >Candidates should possess 2-5 years of experience in a relevant electrical engineering role, demonstrating strong practical skills in crane maintenance. Proficiency in using Microsoft Office applications, including Excel, Word, and Outlook, is required. Experience with Computerized Maintenance Management Systems (CMMS) is also essential for this role.</p> <h3 >Working Environment</h3> <p >This position is primarily office-based but involves frequent visits to operational and maintenance areas. The working conditions include outdoor work, often in hot weather, and exposure to industrial elements such as grease, oil, cleaning chemicals, and other contaminants. Occasional exposure to high-noise environments and work in areas with limited lighting may occur. The mandatory use of Personal Protective Equipment (PPE) is required while performing field duties.</p>

<h3 >About the Opportunity</h3> <p >Eram Talent is seeking a <strong >Maintenance Engineer Systems</strong> to support a leading organization in <strong >Jeddah, Makkah, Saudi Arabia</strong>. This <strong >full-time</strong> role is critical for maintaining and optimizing advanced automation systems, ensuring their reliability, performance, and security within a dynamic operational environment.</p> <h3 >Role Purpose</h3> <p >The Maintenance Engineer Systems will be responsible for the continuous upkeep and enhancement of Niagara4-based Building Automation Systems (BAS) and Integrated Fire Alarm Automation Systems. This involves proactive monitoring, troubleshooting, and implementing improvements to ensure system stability and operational efficiency, contributing to the organization's infrastructure integrity.</p> <h3 >Key Responsibilities</h3> <ul > <li >Monitor and maintain Niagara4-based Integrated Automation Systems (IKAS) and Integrated Fire Alarm Automation Systems (IFAS).</li> <li >Prepare daily system functionality and health reports.</li> <li >Investigate and resolve system alarms, faults, and failures, including Root Cause Analysis (RCA).</li> <li >Create and manage Niagara user accounts according to approved access levels.</li> <li >Monitor system user activities and report security or access violations.</li> <li >Manage software backups and perform restoration when required.</li> <li >Coordinate with IT teams to resolve network and virtual machine issues.</li> <li >Troubleshoot communication issues between Niagara and connected equipment/devices.</li> <li >Configure Niagara machine IP addressing and server communication ports.</li> <li >Perform system optimization, fine-tuning, and continuous improvement.</li> <li >Develop and maintain SQL database scripts and configurations for reporting requirements.</li> <li >Maintain related IT equipment, including servers, workstations, and JACE controllers.</li> <li >Address security alerts raised by Operations and IT departments.</li> <li >Support system expansion projects and ensure vendor/contractor compliance.</li> <li >Maintain Niagara system configurations and graphics accuracy.</li> <li >Conduct audits and inspections of automation systems.</li> <li >Develop software solutions to improve system performance and daily operations.</li> <li >Prepare monthly system status reports and performance/statistics dashboards.</li> <li >Coordinate with software developers and relevant departments on automation-system requirements.</li> <li >Manage TRIDIUM SMA agreements, including software patches, bug fixes, and version upgrades.</li> </ul> <h3 >Required Experience and Technical Knowledge</h3> <ul > <li >Minimum of <strong >7 years of overall relevant experience</strong> in maintenance engineering.</li> <li >At least <strong >3 years of experience</strong> working specifically with Niagara platform-based Building Automation Systems.</li> <li >Proficient knowledge of Niagara4 Java and HTML5 implementation.</li> <li >Solid understanding of Building Automation Systems (BAS) principles and operations.</li> <li >Familiarity with security systems such as Fire Alarm Systems, Lighting Control Systems, and Power Monitoring Systems.</li> <li >Knowledge of Energy Conservation practices.</li> </ul> <h3 >Essential Skills and Attributes</h3> <ul > <li >Strong problem-solving capabilities.</li> <li >Demonstrated Root Cause Analysis (RCA) skills.</li> <li >Fluent in both written and spoken English.</li> </ul> <h3 >Location and Application</h3> <p >This full-time position is based in <strong >Jeddah, Makkah, Saudi Arabia</strong>. The salary for this role will be discussed directly with qualified candidates during the interview process.</p>

<h3 >About Air Products and the Role</h3> <p >Air Products, a world-leading industrial gases company founded in 1940, is seeking an <strong >ICS Network Engineer</strong> to join its team. The company is recognized for its innovation, operational excellence, and unwavering commitment to safety and environmental stewardship, delivering solutions across various critical industries globally. This role is based in Duba, Tabuk, Saudi Arabia.</p> <h3 >The ICS Network Engineer Opportunity</h3> <p >This <strong >full-time</strong> position involves contributing to the implementation and support of network technology, ensuring alignment with Air Products' global standards and strategic direction. The ICS Network Engineer will play a crucial part in maintaining robust and secure enterprise and remote site connectivity, supporting critical infrastructure and operational continuity.</p> <h3 >Key Responsibilities</h3> <ul > <li >Implementing new and enhanced network technology that aligns with Air Products’ and project-specific documented standards and strategic direction for enterprise and remote site connectivity.</li> <li >Learning, understanding, and complying with Air Products standards for global network infrastructure, including wireless, LAN, and SD-WAN networks and connectivity.</li> <li >Working closely with Enterprise Security, Architects, and Network Engineering teams to understand high-level designs and deploy services in line with strategic direction.</li> <li >Executing engineering efforts to ensure the currency and supportability of networking technology.</li> <li >Providing network support for problem escalations.</li> <li >Working with external service providers to troubleshoot and commission wide area network technologies.</li> <li >Participating in Cyber SAT, Integrated SAT, and last planner exercises.</li> <li >Meeting service level commitments for network incidents and deployments.</li> <li >Configuring and commissioning ICS network hardware.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A Bachelor’s degree or equivalent related experience is required.</li> <li >5-10 years of experience in a network engineering role, or applied industry certifications with 5 years equivalent work experience.</li> <li >Demonstrated experience with current LAN, WAN, and SD-WAN networking routing and switching systems.</li> <li >Physical access to applicable Air Products locations within Saudi Arabia.</li> </ul> <h3 >Required Skills and Competencies</h3> <ul > <li >Strong verbal and written communication skills, with the ability to articulate detailed technical concepts and communicate effectively with end-users at all levels.</li> <li >Strong analytical and problem-solving abilities.</li> <li >Ability to work effectively in global, cross-organizational teams to assist with projects and tasks.</li> <li >Meticulous attention to technical details.</li> <li >Ability to work with strategic vendors, outside service/support providers, and other third-party suppliers.</li> <li >Industry skill competence as a certified professional.</li> <li >A positive attitude and results-oriented approach.</li> <li >Strong working knowledge of DNS, DHCP, and IP address management.</li> <li >Proven ability to manage defined scope for field deployments, including planning, project management, coordination, and analytical skills.</li> <li >Ability to recognize and communicate risks, and produce mitigation recommendations.</li> <li >Intermediate skill with network device configuration using CLIs as well as portal/platform management tools.</li> <li >Intermediate scripting skills in PowerShell, Python, and Linux.</li> <li >Intermediate troubleshooting skills using networking tools such as Wireshark and vendor platform portals to identify and diagnose infrastructure and connectivity issues.</li> <li >Ability to interpret design diagrams and accurately document basic network infrastructure environments using programs like Visio.</li> <li >Basic understanding of ITIL processes and procedures for lifecycle management.</li> </ul> <h3 >Work Environment and Application</h3> <p >This <strong >full-time</strong> position is based in Duba, Tabuk, Saudi Arabia. Air Products fosters an environment where every voice is heard, contributing to innovative solutions and a cleaner future. Interested candidates are invited to apply.</p>

<div dir="rtl"><h3 >مقدمة عن الوظيفة</h3> <p >تبحث <strong >شركة زهران للصيانة والتشغيل</strong> عن <strong >مهندس سلامة وصحة مهنية</strong> للانضمام إلى فريقها في مدينة <strong >الباحة</strong>. هذا الدور بدوام كامل ويهدف إلى تعزيز بيئة عمل آمنة وصحية من خلال تطبيق أفضل الممارسات والمعايير في مجال السلامة والصحة المهنية.</p> <h3 >الهدف من الدور</h3> <p >يتولى شاغل الوظيفة مسؤولية شاملة في إعداد وتطوير أسس وقواعد وإجراءات السلامة والصحة المهنية ضمن مواقع العمل. يشمل ذلك تحديد الأخطار المهنية المحتملة ووضع الإجراءات اللازمة لتفاديها، بالإضافة إلى توفير مستلزمات وأدوات السلامة ومتابعة استخدامها بفعالية. كما يتضمن الدور إعداد الوثائق والتقارير المتخصصة التي توضح نتائج الأعمال.</p> <h3 >المهام والمسؤوليات</h3> <ul > <li >إعداد وتطوير أسس وإجراءات وتعليمات السلامة والصحة المهنية، مثل سياسة السلامة وتعليمات العمل الآمن وتعليمات الإخلاء وتعليمات لجان السلامة وسجلات السلامة والفحص الطبي.</li> <li >متابعة اعتماد هذه الإجراءات والتعليمات ومراقبة مدى الالتزام بها في جميع مواقع العمل.</li> <li >تحديد مكامن الأخطار الميكانيكية والكهربائية والكيميائية في موقع العمل ووضع الإشارات والملصقات التحذيرية المناسبة.</li> <li >إعداد قوائم بنود وكميات ومواصفات معدات ومستلزمات السلامة والصحة المهنية.</li> <li >متابعة توفير هذه المعدات والمستلزمات والتأكد من التزام العاملين باستخدامها بشكل صحيح.</li> </ul> <h3 >تطوير العمل والتوثيق</h3> <ul > <li >تطوير أساليب وإجراءات العمل بشكل مستمر ومواكبة التطورات التقنية الحديثة في مجال السلامة والصحة المهنية.</li> <li >إعداد الوثائق والتقارير المتخصصة المتعلقة بالأعمال والمشروعات الهندسية ونسب تقدمها.</li> <li >عرض وتوضيح هذه التقارير وحفظها في قاعدة البيانات الخاصة بها وفقاً للسياسات والإجراءات المعتمدة في الشركة.</li> </ul> <h3 >المؤهلات والخبرات</h3> <ul > <li >خبرة تتراوح من <strong >0 إلى 1 سنة</strong> في مجال السلامة والصحة المهنية أو مجال ذي صلة.</li> <li >القدرة على إعداد وتطوير الإجراءات والتعليمات الفنية.</li> <li >مهارات جيدة في إعداد التقارير والوثائق المتخصصة.</li> </ul> <h3 >بيئة العمل</h3> <p >تتطلب الوظيفة العمل بدوام كامل في مدينة <strong >الباحة</strong>، ضمن فريق متخصص يركز على تحقيق أعلى معايير السلامة والصحة المهنية في جميع مشاريع الشركة.</p></div>

<p>We are seeking an experienced Site Engineer Manager to join our team and oversee the execution of projects on-site. The role will be responsible for supervising construction activities, coordinating with contractors and consultants, monitoring technical quality, and ensuring that all works are executed in accordance with approved drawings, specifications, and safety standards.</p><p>Manage and monitor the day-to-day execution of construction activities at project sites. Supervise finishing and interior design works, ensuring compliance with approved drawings and specifications. Review, coordinate, and follow up on plans and shop drawings, ensuring proper implementation on-site. Supervise Fire Fighting and Fire Alarm Systems and ensure compliance with applicable safety requirements and approved designs. Review and coordinate project maps, layouts, and site plans. Monitor the quality of workmanship and ensure that construction activities comply with approved technical specifications and standards. Coordinate effectively with contractors, consultants, subcontractors, and other project stakeholders. Identify technical issues and follow up on corrective actions to ensure timely resolution. Monitor project progress and prepare regular reports highlighting progress, technical observations, and site issues. Ensure compliance with health, safety, and environmental (HSE) requirements at the project site. Supervise site teams and contractors to ensure work is completed according to the approved schedule and required quality standards. Conduct regular site inspections and provide technical guidance as required. Ensure proper documentation of drawings, site instructions, inspections, and project-related technical records.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Civil Engineering or Architectural Engineering.</li><li>Minimum 7 years of relevant experience in construction project supervision and site management.</li><li>Proven experience in managing and supervising site activities, contractors, and project teams.</li><li>Strong knowledge of finishing, interior works, construction, and MEP coordination.</li><li>Practical experience with Fire Fighting and Fire Alarm Systems is required.</li><li>Proficiency in engineering and design software, particularly AutoCAD and Revit.</li><li>Strong knowledge of reading and interpreting plans, shop drawings, layouts, and technical specifications.</li><li>Fluency in Arabic and English, both written and spoken.</li><li>Valid membership with the Saudi Council of Engineers (SCE).</li><li>Strong communication, coordination, problem-solving, and project management skills.</li><li>Willingness and ability to work on-site and conduct regular field inspections in Riyadh.</li><li>Strong attention to detail and commitment to quality.</li><li>Ability to manage multiple site activities and priorities simultaneously.</li><li>Strong leadership and contractor management skills.</li><li>Good understanding of construction standards, safety requirements, and project documentation.</li></ul>

<p>Eram Talent is seeking a qualified Maintenance Engineer Systems to support a leading organization in Saudi Arabia. The role will be responsible for maintaining and optimizing Niagara4-based Building Automation Systems and Integrated Fire Alarm Automation Systems , ensuring system reliability, performance, security, and continuous improvement. Key Responsibilities Monitor and maintain Niagara4-based Integrated Automation Systems (IKAS) and Integrated Fire Alarm Automation Systems (IFAS) . Prepare daily system functionality and health reports. Investigate and resolve system alarms, faults, and failures, including Root Cause Analysis (RCA) . Create and manage Niagara user accounts according to approved access levels. Monitor system user activities and report security or access violations. Manage software backups and perform restoration when required. Coordinate with IT teams to resolve network and virtual machine issues . Troubleshoot communication issues between Niagara and connected equipment/devices. Configure Niagara machine IP addressing and server communication ports . Perform system optimization, fine-tuning, and continuous improvement. Develop and maintain SQL database scripts and configurations for reporting requirements. Maintain related IT equipment, including servers, workstations, and JACE controllers . Address security alerts raised by Operations and IT departments. Support system expansion projects and ensure vendor/contractor compliance. Maintain Niagara system configurations and graphics accuracy. Conduct audits and inspections of automation systems. Develop software solutions to improve system performance and daily operations. Prepare monthly system status reports and performance/statistics dashboards. Coordinate with software developers and relevant departments on automation-system requirements. Manage TRIDIUM SMA agreements , including software patches, bug fixes, and version upgrades.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in Computer Science, Electrical Engineering, Electronics Engineering. Minimum 7 years of overall relevant experience . Minimum 3 years of experience working with Niagara platform-based Building Automation Systems . Knowledge of Niagara4 Java and HTML5 implementation . Knowledge of Building Automation Systems (BAS) . Knowledge of security systems such as: Fire Alarm Systems Lighting Control Systems Power Monitoring Systems Strong problem-solving and Root Cause Analysis (RCA) skills. Knowledge of Energy Conservation . Fluent in written and spoken English .</p>

<p>Eram Talent is seeking a qualified Maintenance Engineer Systems to support a leading organization in Saudi Arabia. The role will be responsible for maintaining and optimizing Niagara4-based Building Automation Systems and Integrated Fire Alarm Automation Systems , ensuring system reliability, performance, security, and continuous improvement. Key Responsibilities Monitor and maintain Niagara4-based Integrated Automation Systems (IKAS) and Integrated Fire Alarm Automation Systems (IFAS) . Prepare daily system functionality and health reports. Investigate and resolve system alarms, faults, and failures, including Root Cause Analysis (RCA) . Create and manage Niagara user accounts according to approved access levels. Monitor system user activities and report security or access violations. Manage software backups and perform restoration when required. Coordinate with IT teams to resolve network and virtual machine issues . Troubleshoot communication issues between Niagara and connected equipment/devices. Configure Niagara machine IP addressing and server communication ports . Perform system optimization, fine-tuning, and continuous improvement. Develop and maintain SQL database scripts and configurations for reporting requirements. Maintain related IT equipment, including servers, workstations, and JACE controllers . Address security alerts raised by Operations and IT departments. Support system expansion projects and ensure vendor/contractor compliance. Maintain Niagara system configurations and graphics accuracy. Conduct audits and inspections of automation systems. Develop software solutions to improve system performance and daily operations. Prepare monthly system status reports and performance/statistics dashboards. Coordinate with software developers and relevant departments on automation-system requirements. Manage TRIDIUM SMA agreements , including software patches, bug fixes, and version upgrades.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in Computer Science, Electrical Engineering, Electronics Engineering. Minimum 7 years of overall relevant experience . Minimum 3 years of experience working with Niagara platform-based Building Automation Systems . Knowledge of Niagara4 Java and HTML5 implementation . Knowledge of Building Automation Systems (BAS) . Knowledge of security systems such as: Fire Alarm Systems Lighting Control Systems Power Monitoring Systems Strong problem-solving and Root Cause Analysis (RCA) skills. Knowledge of Energy Conservation . Fluent in written and spoken English .</p>

<h3 >About the Role</h3> <p >Unified Real Estate Development Company is seeking an Artificial Intelligence Engineer to join its team in Riyadh, Saudi Arabia. This full-time individual contributor position involves designing and building central data infrastructure, integrating frontier Large Language Models (LLMs), and developing internal tools. The primary objective is to enable AI-powered analysis for non-technical staff, focusing on the implementation and integration of existing models rather than machine learning research or pure data engineering.</p> <h3 >Key Responsibilities</h3> <ul > <li >Design and build central data infrastructure, such as ClickHouse or a data lake, to aggregate data from property management, leasing, finance, and operations systems.</li> <li >Integrate frontier LLMs (*, Claude, GPT-4) via API to serve as the reasoning and analysis layer over internal data.</li> <li >Build and maintain retrieval pipelines for intelligent selection, filtering, and delivery of relevant data to LLMs within context window constraints.</li> <li >Develop internal tools, dashboards, or interfaces that facilitate interaction with AI-powered analysis for non-technical staff.</li> <li >Implement data security, access controls, and compliance protocols to ensure appropriate handling of sensitive real estate and tenant data.</li> <li >Architect systems with modularity, allowing for swappable LLM providers, data sources, and tools as the technological landscape evolves.</li> <li >Monitor AI output quality and establish validation/feedback loops to mitigate hallucinations and errors.</li> <li >Stay informed on AI developments and proactively recommend new capabilities relevant to Unified’s operations.</li> <li >Document all systems, architectures, and processes thoroughly to minimize bus-factor risk.</li> </ul> <h3 >Required Qualifications</h3> <ul > <li >3–5 years of software engineering experience with strong proficiency in Python.</li> <li >Hands-on experience building applications that integrate with LLM APIs (*, Anthropic, OpenAI).</li> <li >Practical knowledge of data engineering, including ETL pipelines, SQL, and working with structured and semi-structured data at scale.</li> <li >Experience with at least one analytical database such as ClickHouse, PostgreSQL, BigQuery, or Snowflake.</li> <li >Understanding of retrieval-augmented generation (RAG) patterns, vector databases, and context management strategies.</li> <li >Familiarity with orchestration frameworks (*, LangChain, LlamaIndex, or custom equivalents).</li> <li >Ability to deploy and maintain production services, including Docker, cloud infrastructure, and CI/CD basics.</li> <li >Strong communication skills to explain technical constraints and trade-offs clearly to non-technical stakeholders.</li> </ul> <h3 >Preferred Qualifications</h3> <ul > <li >Experience in real estate, property management, or construction technology.</li> <li >Exposure to agent-based AI workflows and multi-step task orchestration.</li> <li >Experience with data visualization tools or building internal dashboards (*, Streamlit, Retool).</li> <li >Familiarity with Arabic language NLP or bilingual data environments.</li> <li >Previous experience working in small teams or startup-like environments with end-to-end project ownership.</li> </ul> <h3 >Role Scope and Focus</h3> <p >This position is an individual contributor role with high autonomy and direct impact. It is specifically focused on implementing and integrating existing frontier models, not on machine learning research or model training/fine-tuning. While it involves building data infrastructure, the primary goal is to power AI applications, not solely to maintain databases. This is not a management position.</p> <h3 >Work Environment</h3> <p >This role is based in Riyadh. The Artificial Intelligence Engineer will participate in weekly rotating meetings with various departments, including leasing, property management, finance, and operations, alongside an AI Analyst. These meetings aim to understand business needs and demonstrate progress. The work environment emphasizes a fast iteration cycle, with an expectation for working prototypes over lengthy planning phases.</p>

<h3 >About the Opportunity</h3> <p >Tangent International is seeking a <strong >DPI Performance Engineer</strong> for a contract position based in Riyadh, Saudi Arabia. This role focuses on the critical monitoring, analysis, troubleshooting, and optimization of Deep Packet Inspection (DPI) platforms and their associated network services.</p> <h3 >Role Summary</h3> <p >The successful engineer will be responsible for ensuring the optimal performance and health of DPI platforms. This involves comprehensive oversight of subscriber and application traffic, KPI/KQI performance, capacity utilization, and traffic trends. A key aspect of the role is conducting Root Cause Analysis (RCA) and driving continuous optimization efforts across the DPI infrastructure. Collaboration is essential, working closely with various internal and external teams to ensure seamless operation and service quality.</p> <h3 >Key Responsibilities</h3> <ul > <li >Monitor DPI platform CPU, memory, throughput, PPS, sessions, subscriber capacity, and utilization.</li> <li >Analyze application traffic, classification accuracy, and traffic trends.</li> <li >Investigate traffic spikes, drops, shifts, and abnormal behavior.</li> <li >Monitor throughput, latency, RTT, packet loss, connectivity, and other service-quality indicators.</li> <li >Maintain DPI performance dashboards, reports, KPI/KQI views, and thresholds.</li> <li >Troubleshoot service degradation and conduct detailed Root Cause Analysis (RCA).</li> <li >Correlate DPI issues across Core, IP, BNG/UPF, IGW, PCRF/PCF, OCS, and AAA domains.</li> <li >Perform traffic-growth and capacity forecasting.</li> <li >Recommend capacity expansion, traffic redistribution, and optimization actions.</li> <li >Conduct pre/post-change performance analysis for upgrades, migrations, and configuration changes.</li> <li >Work with DPI vendors on advanced troubleshooting.</li> <li >Automate reporting and analysis where appropriate.</li> </ul> <h3 >Required Experience</h3> <p >Candidates should possess <strong >2-5 years of relevant experience</strong> in DPI performance engineering or a closely related field. This experience should include hands-on involvement with monitoring, analysis, and troubleshooting of network services and Deep Packet Inspection platforms.</p> <h3 >Team Collaboration and Vendor Engagement</h3> <p >The role requires strong collaborative skills to interface with various internal teams, including Core, IP, Internet Gateway, BNG/UPF, PCRF/PCF, OCS, AAA, Transmission, Planning, and Operations. Additionally, the engineer will engage directly with DPI vendors to resolve complex issues and drive platform enhancements, ensuring optimal system performance and reliability.</p> <h3 >Location and Employment Type</h3> <p >This is a <strong >contract position</strong> located in <strong >Riyadh, Saudi Arabia</strong>. Salary details for this role will be discussed during the interview process.</p>

<h3 >About the Role: Artificial Intelligence Engineer</h3> <p >MIS - Al Moammar Information Systems Co. is seeking an <strong >Artificial Intelligence Engineer</strong> to join their team in <strong >Riyadh, Saudi Arabia</strong>. This <strong >full-time</strong> position focuses on designing, developing, and deploying advanced AI/ML solutions for various business and operational use cases. The role involves integrating machine learning and deep learning models into applications and platforms, contributing to the advancement of AI capabilities within the company.</p> <h3 >Key Responsibilities</h3> <ul > <li >Design, develop, and deploy AI/ML solutions for business and operational use cases.</li> <li >Develop and integrate machine learning and deep learning models into applications and platforms.</li> <li >Work with Generative AI, Large Language Models (LLMs), Natural Language Processing (NLP), and AI agents where applicable.</li> <li >Build AI solutions using Python and relevant AI/ML frameworks and libraries.</li> <li >Develop and integrate AI APIs and services into enterprise applications.</li> <li >Perform data preparation, model training, evaluation, optimization, and monitoring.</li> <li >Collaborate with software engineers, data teams, business analysts, and stakeholders to translate requirements into AI solutions.</li> <li >Ensure AI solutions are scalable, reliable, secure, and suitable for production environments.</li> <li >Stay up to date with emerging AI technologies, tools, frameworks, and industry best practices.</li> <li >Prepare technical documentation and contribute to AI architecture and solution design.</li> </ul> <h3 >Candidate Profile and Experience</h3> <ul > <li >A minimum of <strong >3+ years of professional experience</strong> in AI/ML engineering or a related role.</li> <li >Demonstrated experience working with APIs, databases, and integrating AI models into enterprise applications.</li> <li >Good understanding of machine learning algorithms, model evaluation, and data processing techniques.</li> <li >Strong analytical, problem-solving, communication, and teamwork skills.</li> </ul> <h3 >Technical Proficiencies</h3> <p >Candidates should possess proficiency in building AI solutions using <strong >Python</strong> and relevant AI/ML frameworks and libraries. Familiarity with cloud AI/ML platforms is considered a plus. Knowledge of <strong >Docker, Git, CI/CD, and MLOps</strong> is also beneficial for this role.</p> <h3 >Work Setting</h3> <p >This is a <strong >full-time</strong> position based in <strong >Riyadh, Saudi Arabia</strong>. The role involves working collaboratively within a team environment, engaging with various technical and business stakeholders to deliver robust AI solutions.</p> <h3 >Join Our Team</h3> <p >Join MIS - Al Moammar Information Systems Co. and contribute to the development of innovative artificial intelligence solutions that drive business and operational advancements.</p>