Engineering Jobs in Saudi

<h3><strong>About the Role</strong></h3><p>ENGIE Solutions Middle East is seeking a <strong>Senior Road and Street Lighting Electrical Engineer</strong> to join our team in Al Ula, Al Madinah, Saudi Arabia. This full-time role operates within the Facility Management Agent environment of Al Ula City Public Works, focusing on the planning, inspection, and auditing of electrical systems. The successful candidate will lead a team of engineers and ensure the integrity and compliance of public works and utility electrical infrastructure.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Manage contractors involved in civil works interfaces, road electrical infrastructure, and street lighting systems, providing technical guidance to ensure safe, compliant, and high-quality project delivery.</li><li>Oversee the planning, design review, installation, testing, operation, and maintenance of road electrical assets, including street lighting, feeder pillars, cabling, control panels, earthing, protection systems, and associated civil works.</li><li>Conduct routine inspections, audits, and condition assessments of street lighting and road electrical infrastructure to verify safety, workmanship, asset integrity, performance, and compliance with statutory requirements.</li><li>Develop and implement maintenance strategies, preventive maintenance schedules, emergency response procedures, and rectification plans for road lighting networks and associated electrical infrastructure.</li><li>Provide expert technical support for troubleshooting road electrical faults, lighting failures, cable damage, control system issues, and interface constraints between electrical installations and civil works.</li><li>Promote continuous improvement, energy efficiency, safe work practices, and knowledge sharing in the management of public road lighting and electrical infrastructure.</li></ul><h3><strong>Compliance and Oversight</strong></h3><p>This role involves managing third-party oversight and ensuring all works comply with applicable Saudi public works requirements, municipal regulations, the Saudi Road Code / Highway Code provisions, utility authority requirements, safety regulations, and approved project specifications. The Senior Engineer will also be responsible for preparing and presenting technical, operational, compliance, and performance reports covering road electrical assets, street lighting condition, defects, corrective actions, contractor performance, and regulatory compliance status.</p><h3><strong>Experience and Qualifications</strong></h3><p>Candidates should possess a strong background in electrical engineering, specifically within road and street lighting infrastructure. A minimum of <strong>10 years of relevant experience</strong> is required for this position, demonstrating a proven ability to manage complex electrical systems and lead technical teams.</p><h3><strong>Work Environment</strong></h3><p>The position is based in Al Ula, Al Madinah, Saudi Arabia, and requires working within a dynamic public works environment. The role demands a proactive approach to maintaining and enhancing critical urban infrastructure, ensuring high standards of safety and operational efficiency.</p><h3><strong>Application Process</strong></h3><p>Interested candidates are encouraged to apply, bringing their expertise to contribute to the development and maintenance of Al Ula City's public infrastructure.</p>

<h3 >About the Role</h3> <p >Eram Talent is seeking a <strong >Mechanical Maintenance Engineer specializing in HVAC</strong> with core experience in petrochemical plants. This contract position is based in Al Jubayl, Saudi Arabia. The successful candidate will be responsible for maintaining the reliability, availability, and performance of HVAC and Mechanical Refrigeration Units (MRUs) that serve critical petrochemical facilities.</p> <h3 >Key Responsibilities</h3> <p >The role involves leading preventive and predictive maintenance programs, troubleshooting activities, and reliability improvement initiatives. Specific responsibilities include:</p> <ul > <li >Maintaining, troubleshooting, and optimizing HVAC, chiller, and industrial refrigeration systems within petrochemical and process plant environments.</li> <li >Diagnosing and resolving mechanical, electrical, instrumentation, refrigeration, and control-related failures to ensure maximum equipment availability and reliability.</li> <li >Analyzing operating parameters, including temperature, pressure, flow, superheat, subcooling, and compressor performance, to identify system abnormalities and implement corrective actions.</li> <li >Performing equipment performance evaluations, condition assessments, and reliability improvements to minimize downtime and optimize energy efficiency.</li> <li >Conducting Root Cause Investigation (RCI) for critical and repetitive equipment failures and implementing corrective and preventive actions.</li> </ul> <h3 >Technical Expertise</h3> <p >Candidates must possess hands-on expertise with a range of equipment and systems, including:</p> <ul > <li >Mechanical Refrigeration Units (MRUs), centrifugal, screw, and reciprocating chillers, AHUs, package units, ventilation systems, compressors, condensers, evaporators, and pumps.</li> <li >Refrigeration control systems and Building Management Systems (BMS), including monitoring equipment performance, troubleshooting control logic, analyzing alarms, optimizing system operation, and integrating HVAC assets with centralized monitoring and control platforms.</li> <li >Proficiency in interpreting HVAC/refrigeration schematics, P&amp;IDs, electrical drawings, and OEM technical documentation.</li> </ul> <h3 >Maintenance Program Development</h3> <p >The engineer will be responsible for developing and optimizing maintenance strategies to ensure operational efficiency:</p> <ul > <li >Developing and optimizing preventive maintenance programs based on equipment criticality and reliability data.</li> <li >Ensuring the timely completion of maintenance plans and work orders.</li> </ul> <h3 >Spare Parts Management</h3> <p >This role includes optimizing spare parts inventory to support uninterrupted operations:</p> <ul > <li >Reviewing and optimizing HVAC spare parts inventory.</li> <li >Identifying critical and insurance spare parts requirements.</li> <li >Establishing minimum and maximum inventory levels based on risk and lead times.</li> <li >Coordinating with procurement and warehouse teams to ensure spare part availability.</li> <li >Supporting obsolescence management and spare part standardization initiatives.</li> </ul> <h3 >Safety and Compliance</h3> <p >Adherence to safety regulations and engineering standards is a critical aspect of this position:</p> <ul > <li >Ensuring compliance with company safety regulations and engineering standards.</li> <li >Participating in Pre-Startup Safety Reviews (PSSR), risk assessments, and incident investigations when required.</li> <li >Supporting process safety requirements related to HVAC systems serving critical occupied buildings.</li> </ul> <h3 >Experience Requirements</h3> <p >A minimum of <strong >5 to 10 years of experience</strong> in mechanical maintenance, specifically with HVAC systems in petrochemical or similar heavy industrial environments, is required for this role.</p>

<h3 >About the Role</h3> <p >Parsons Corporation is seeking a <strong >Senior Engineer: Fire &amp; Life Safety (Saudi National)</strong> to join their team in Riyadh, Saudi Arabia. This full-time position is critical for ensuring fire and life safety across a client’s diverse portfolio of city assets. The role involves applying international fire engineering practices, SBC 201 and SBC 801 (2024), Saudi Civil Defense requirements, and relevant NFPA standards to safeguard guests, employees, contractors, infrastructure, and business continuity throughout the asset lifecycle, from design and construction to commissioning and operational use.</p> <h3 >Core Responsibilities</h3> <ul > <li >Plan, conduct, and document fire risk assessments across various premises, identifying hazards, assigning risk ratings, and defining control measures.</li> <li >Deliver a planned, risk-based program of fire and life safety inspections and technical audits for assets in all lifecycle stages.</li> <li >Act as a rostered tactical (Silver) commander for fire, evacuation, and life safety incidents, directing operational resources and coordinating with the City Command Unit (CCU) and Saudi Civil Defense.</li> <li >Review fire strategies, performance-based designs, fire engineering reports, and construction documentation, providing technical comments and operational input.</li> <li >Witness and verify commissioning and integrated system testing of fire detection, alarm, suppression, and smoke control systems.</li> <li >Investigate fire incidents, near misses, and system failures to establish root causes and implement corrective and preventive actions.</li> <li >Support the technical interface with Saudi Civil Defense on inspections, approvals, permitting, and compliance matters.</li> <li >Support the delivery of fire safety training, competence development, and awareness campaigns, fostering a proactive life safety culture.</li> </ul> <h3 >Candidate Profile and Experience</h3> <ul > <li ><strong >Education:</strong> Bachelor’s degree in Fire Safety Engineering, Fire Engineering, Building Engineering, Mechanical or Electrical Engineering, Leadership and Sustainability, or a related discipline.</li> <li ><strong >Experience:</strong> Minimum of 6 years of progressive experience in fire and life safety, fire engineering, fire safety inspection, or fire and emergency response operations, including significant experience in a senior technical role.</li> <li >Demonstrable experience completing and signing off fire risk assessments for complex, high-occupancy, or high-consequence premises.</li> <li >Proven experience delivering fire and life safety inspection and audit programs, and driving deficiency close-out.</li> <li >Practical operational response experience with assessed competence at tactical or Silver command level, including live incidents, exercises, or drills.</li> <li >Experience across the asset lifecycle, including design review, construction assurance, commissioning witnessing, and operational readiness.</li> <li >Background in a fire and rescue service, industrial or aviation fire service, fire safety regulator, or enforcing authority, combined with consultancy or client-side experience.</li> </ul> <h3 >Required Technical Competencies</h3> <ul > <li >Strong knowledge of SBC 201 and SBC 801 (2024), Saudi Civil Defense requirements, and NFPA standards (*, NFPA 1, 101, 72, 13, 20, 25, 1660, 1750).</li> <li >Competence in fire risk assessment methodology, risk rating, control selection, and significant findings reporting.</li> <li >Experience in fire and life safety inspection, audit, deficiency management, impairment control, and permit-to-work regimes.</li> <li >Strong understanding of fire strategies, compartmentation, means of escape, smoke control, suppression, detection, alarm, and fire water systems.</li> <li >Competence in incident command at tactical or Silver level, analytical risk assessment, sectorization, evacuation management, and multi-agency liaison.</li> <li >Clear technical report writing skills, evidence management, dashboard reporting, and use of digital inspection tools, CAFM, and document-management systems.</li> </ul> <h3 >Certifications and Preferred Attributes</h3> <ul > <li ><strong >Required:</strong> NEBOSH Certificate or Diploma in Fire Safety, or equivalent recognized international fire safety qualification.</li> <li ><strong >Preferred:</strong> Recognized fire risk assessor certification or listing on a third-party register.</li> <li ><strong >Preferred:</strong> Incident command qualification at tactical or Silver level, or equivalent operational command training and assessed competence.</li> <li ><strong >Preferred:</strong> Experience within large-scale mixed-use developments, theme parks, stadia, entertainment destinations, or giga-projects.</li> <li ><strong >Preferred:</strong> Experience in Saudi Arabia or the wider GCC, including interface with Saudi Civil Defense.</li> <li ><strong >Preferred:</strong> Master’s degree in Fire Safety Engineering or a relevant discipline.</li> <li ><strong >Preferred:</strong> Professional membership of the Institution of Fire Engineers (IFE) at Member grade, or working towards it.</li> </ul> <h3 >Role Context and Impact</h3> <p >This full-time position is based in Riyadh, Saudi Arabia, and is designated for a Saudi National. The Senior Engineer will also contribute to the Saudization initiative for City Operations by acting as a mentor, providing technical coaching and guidance to fire and life safety engineers, inspectors, and operational personnel. This role is integral to maintaining high standards of fire and life safety and supporting continuous improvement within the client's city operations.</p>

<ol><li><p>Identify and develop new sales opportunities for <strong>Structural Steel and Steel Fabrication Projects</strong> in Saudi Arabia.</p></li><li><p>Generate leads and RFQs from contractors, EPC companies, industrial clients, consultants, and project owners.</p></li><li><p>Conduct regular customer visits and build strong relationships with key decision-makers.</p></li><li><p>Follow up on upcoming and ongoing projects and convert opportunities into confirmed orders.</p></li><li><p>Review customer inquiries, drawings, BOQs, specifications, and project requirements.</p></li><li><p>Coordinate with the Estimation and Engineering teams to prepare accurate technical and commercial quotations.</p></li><li><p>Follow up submitted quotations, negotiate commercial terms, and support order closing.</p></li><li><p>Maintain an active sales pipeline and report on leads, RFQs, quotations, expected orders, and awarded projects.</p></li><li><p>Search for relevant opportunities through <strong>Etimad and other procurement/tender platforms</strong>.</p></li><li><p>Support vendor registration and prequalification with major clients, contractors, and industrial companies.</p></li><li><p>Coordinate internally with Engineering, Production, Procurement, and Project teams as required.</p></li><li><p>Achieve assigned sales targets and contribute to expanding the factory’s customer base.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Bachelor’s degree or Diploma in <strong>Mechanical, Civil, Structural, Industrial Engineering</strong>, or a related technical field.</p></li><li><p>Minimum <strong>3–5 years of relevant experience</strong> in project sales, preferably in Structural Steel, Steel Fabrication, or Industrial Fabrication.</p></li><li><p>Strong knowledge of the <strong>Saudi Arabian projects and contracting market</strong>.</p></li><li><p>Proven ability to generate new customers, obtain RFQs, and convert opportunities into purchase orders.</p></li><li><p>Existing relationships with contractors, EPC companies, consultants, industrial clients, or project owners will be a strong advantage.</p></li><li><p>Good understanding of structural steel fabrication, drawings, BOQs, specifications, and steel materials.</p></li><li><p>Experience in products such as structural steel, platforms, walkways, handrails, pipe supports, skids, tanks, equipment frames, and heavy fabrication is preferred.</p></li><li><p>Strong communication, negotiation, presentation, and customer relationship skills.</p></li><li><p>Self-motivated, field-oriented, and capable of working independently.</p></li><li><p>Good command of English; Arabic is an advantage.</p></li><li><p>Valid Saudi driving license is preferred.</p></li><li><p>Candidates with a demonstrated track record in bringing steel fabrication or structural steel projects will be given preference.</p></li></ol>

<p>Jobholders at this level are experienced professionals capable of conducting work with general directions. They are primarily concerned with developing solutions to challenges which require some analysis to understand and resolve, and addressing issues escalated from junior levels. They undertake complex operational activities including developing of ZATCA IT infrastructure roadmap, project plans, and capacity plans based on new trends and cutting-edge technology. Develop the IT infrastructure RFPs and participate in vendors evaluation and selection. Evaluate the received change requests related to IT infrastructure and set proper priorities. Monitor ZATCA IT infrastructure performance, recommend corrections, and communicate performance reports to all stakeholders.</p><p>Conduct research on the latest trends and cutting-edge technology of IT infrastructure, capture ZATCA IT infrastructure capabilities and technology, identify gaps based on deep analysis, and accordingly develop the ZATCA IT infrastructure roadmap to meet ZATCA Strategy and business objectives Translate the developed ZATCA IT roadmap into IT infrastructure projects, develop the IT infrastructure implementation plan, and ensure proper alignment with IT enterprise architecture and standards Collect business requirements, conduct analysis sessions with business users and vendors to identify proper capacity forecast for IT infrastructure servers, hardware, systems, datacenters, storage, and networks, and accordingly develop and maintain the capacity plans Define infrastructure performance metrics, oversee the development of the needed monitoring tools and data gathering of the defined metrics, and oversee the development of agreed upon reports Receive change requests to infrastructure, evaluate the impact of the requested changes on the IT architecture, and accordingly prioritize and plan the implementation of the change requests</p><p>Conduct requirements gathering meetings with all stakeholders to develop the RFPs related to IT infrastructure, evaluate the list of vendors based on set of pre-defined criteria, and participate in the selection of vendors and negotiation of SLAs in cooperation with the relevant stakeholders Gather all inputs needed to identify IT risks that could occur through the introduction of new technologies, oversee the development of the IT risk mitigation plan and ensure cascading the IT mitigation plan to all stakeholders Monitor the IT infrastructure implementation (including systems, application logs, storage, data backup and archiving, etc.) against set of KPIs, generate periodical reports and provide recommendations on needed actions for optimizations Monitor the performance of ZATCA IT infrastructure components using the developed monitoring tools, generate the needed reports, and cascade the performance reports to all relevant functions for improvement Follow all relevant policies, processes and standard operating procedures so that work is carried out in a controlled and consistent manner Help in solving escalated problems and provide needed support for junior team to ensure work is carried out in an efficient manner Escalate complex problems to the relevant person to ensure cases/issues are closed properly Perform other duties as requested</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in Computer Science, Information Technology, or equivalent is required</p><p>A minimum of 4 years of relevant experience</p><p>Professionalism - Proficient</p><p>Collaboration and Communication - Developing</p><p>Results Oriented - Proficient</p><p>Customer Focus - Proficient</p><p>Enablement of Change and Innovation - Developing</p><p>IT Compliance - Proficient</p><p>Infrastructure Management - Proficient</p><p>Project Management - Proficient</p><p>Vendor Management - Proficient</p><p>IT Change Management - Proficient</p><p>IT Systems Management - Advanced</p>

<p>Job Description:</p><p>Core Stack: IBM CP4I (ACE, MQ, API Connect), Spring Boot, Red Hat OpenShift.</p><p>1. Role Objective</p><p>The Integration Support is responsible for the health and reliability of the enterprise middleware layer. the L2 engineers to manage complex data flows between systems, ensuring that Spring Boot services and IBM CP4I components (MQ, ACE, APIC) are performant, secure, and highly available.</p><p>2. Strategic Technical Leadership</p><p>End-to-End Traceability: tracing transaction flows from the API Gateway (API Connect) through the Enterprise Service Bus (ACE) to the backend Microservices (Spring Boot).</p><p>Root Cause Analysis (RCA): Spearhead deep-dive investigations into middleware failures, such as message losses in MQ, synchronization errors in ACE, or JVM crashes in Spring Boot.</p><p>Platform Governance: Oversee the stability of integration components running on Red Hat OpenShift , ensuring optimal resource (CPU/Memory) allocation and pod scaling.</p><p>Security Enforcement: Manage and troubleshoot security protocols, including Mutual TLS (mTLS), OAuth2, and JWE/JWS within the integration layer.</p><p>3. Detailed Technical Responsibilities</p><p>A. IBM Cloud Pak for Integration (CP4I)</p><p>App Connect Enterprise (ACE): Troubleshoot message flows, ESQL logic errors, and adapter connectivity issues (SAP, Database, File).</p><p>IBM MQ: Manage queue managers, resolve channel retries, and investigate dead-letter queues or message persistence issues.</p><p>API Connect: Resolve issues related to API definitions, security policies, and Gateway (DataPower) latency.</p><p>B. Backend Microservices (Spring Boot)</p><p>Performance Tuning: Analyze JVM thread dumps and heap dumps to resolve memory leaks or high CPU utilization in microservices.</p><p>Connectivity Debugging: Troubleshoot Spring Boot integration with databases (JPA/Hibernate) and external messaging systems (JMS/Kafka).</p><p>Log Aggregation: Utilize ELK/Splunk to correlate logs across multiple microservices to identify points of failure in a distributed architecture.</p><p>4. Technical Skill Set</p><p>Integration Platforms: Mastery of IBM CP4I (specifically ACE, MQ, and API Connect).</p><p>Development Frameworks: Advanced knowledge of Java and Spring Boot (Spring Integration, Spring Cloud).</p><p>Containerization: Expert-level proficiency in Red Hat OpenShift and Kubernetes.</p><p>Protocols &amp; Standards: Expert understanding of REST, SOAP, JSON, XML, AMQP, and MQTT.</p><p>Monitoring Tools: Hands-on experience with IBM Instana, Dynatrace, or Prometheus/Grafana .</p><p>5. Qualifications</p><p>Experience: 5+ years in Middleware or Integration Support</p><p>Currently residing in KSA</p><p>Complex Problem Solving: Ability to debug asynchronous communication patterns and distributed transactions.</p><p>Education: Bachelor s degree in Computer Science, Software Engineering, or a related field.</p><p>Certifications (Preferred): IBM Cloud Pak for Integration Specialist, Red Hat Certified Specialist in OpenShift Administration.</p><p>6. Key Performance Indicators (KPIs)</p><p>Integration Uptime: Achieving 99.99% availability for critical middleware components.</p><p>L2 Resolution Rate: Maximizing the number of integration issues resolved without escalation to L3 Engineering.</p><p>MTTR: Reducing the time taken to identify and fix failures in the message delivery pipeline.</p><p>At DXC Technology, we believe strong connections and community are key to our success. Our work model prioritizes in-person collaboration while offering flexibility to support wellbeing, productivity, individual work styles, and life circumstances. We re committed to fostering an inclusive environment where everyone can thrive.</p><p>Recruitment fraud is a scheme in which fictitious job opportunities are offered to job seekers typically through online services, such as false websites, or through unsolicited emails claiming to be from the company. These emails may request recipients to provide personal information or to make payments as part of their illegitimate recruiting process. DXC does not make offers of employment via social media networks and DXC never asks for any money or payments from applicants at any point in the recruitment process, nor ask a job seeker to purchase IT or other equipment on our behalf. More information on employment scams is available here .</p><p><strong>Desired Candidate Profile</strong></p><ul><li>5+ years in Middleware or Integration Support</li><li>Currently residing in KSA</li><li>Complex Problem Solving: Ability to debug asynchronous communication patterns and distributed transactions.</li><li>Education: Bachelor s degree in Computer Science, Software Engineering, or a related field.</li><li>Certifications (Preferred): IBM Cloud Pak for Integration Specialist, Red Hat Certified Specialist in OpenShift Administration.</li></ul>

<h3 >About TAWANTECH and the Role</h3> <p >TAWANTECH is seeking a <strong >Senior BPMS / IBM BAW Support Engineer</strong> to join our team in Riyadh, Saudi Arabia. This full-time position requires 5-10 years of experience and focuses on providing operational support for enterprise Business Process Management (BPMS) and workflow applications.</p> <h3 >Role Purpose</h3> <p >The primary purpose of this role is to ensure the availability, stability, and performance of mission-critical business process solutions built on IBM Business Automation Workflow (BAW) and IBM WebSphere Application Server (WAS). As part of a 24x7 production support organization, the engineer will be responsible for leading incident resolution, monitoring application health, and troubleshooting complex workflow issues, collaborating with various technical and business teams to maintain seamless operations.</p> <h3 >Key Responsibilities</h3> <ul > <li >Provide Level 2/Level 3 production support for IBM BAW/BPMS applications.</li> <li >Monitor and support IBM Business Automation Workflow (BAW) runtime environments and workflow services.</li> <li >Lead troubleshooting and resolution of complex production incidents affecting business process applications.</li> <li >Support Process Server, Process Center, and deployment environments.</li> <li >Monitor workflow instances, business services, and application health to ensure maximum availability.</li> <li >Analyze application logs, JVMs, thread dumps, heap dumps, and system metrics to diagnose and resolve production issues.</li> <li >Perform Root Cause Analysis (RCA) and implement preventive measures to reduce recurring incidents.</li> <li >Support application deployments, configuration changes, patches, and production releases.</li> <li >Manage application server configurations, clusters, and deployments on IBM WebSphere Application Server (WAS).</li> <li >Collaborate with Development, Middleware, Infrastructure, Database, and DevOps teams during major incidents and releases.</li> <li >Perform production readiness reviews and post-deployment validation.</li> <li >Develop and maintain operational documentation, runbooks, knowledge base articles, and support procedures.</li> <li >Drive operational improvements through automation, monitoring enhancements, and proactive health checks.</li> <li >Mentor junior engineers and provide technical leadership during critical production incidents.</li> <li >Ensure compliance with SLAs, operational standards, security policies, and ITIL best practices.</li> </ul> <h3 >Required Experience and Qualifications</h3> <p >Candidates for this Senior BPMS / IBM BAW Support Engineer role should possess 5-10 years of relevant experience. Key qualifications include:</p> <ul > <li ><strong >Strong hands-on experience administering IBM WebSphere Application Server (WAS).</strong></li> <li >Experience supporting mission-critical workflow and business process applications.</li> <li >Experience troubleshooting clustered WebSphere environments and distributed enterprise applications.</li> </ul> <h3 >Technical Skills and Operational Frameworks</h3> <ul > <li >Familiarity with enterprise monitoring tools such as Dynatrace, Splunk, AppDynamics, or equivalent.</li> <li >Experience working within Agile, DevOps, and ITIL service management frameworks.</li> <li >Banking or financial services experience is highly preferred.</li> </ul> <h3 >Work Environment</h3> <p >This role operates within a 24x7 production support organization, requiring a commitment to maintaining high availability and performance for critical business solutions. The position is full-time and based in Riyadh, Saudi Arabia.</p>

<h3 >About the Opportunity</h3> <p >Wood (KSA) is seeking a <strong >TPE IV/Senior Site Structural Engineer</strong> to join its projects business. This full-time role is based in Al Khobar and involves contributing to the development of a new gold mine and processing facility located at a remote site in Saudi Arabia. The position requires a professional with over <strong >10 years of experience</strong> in structural engineering within site-based project environments.</p> <h3 >About Wood</h3> <p >Wood is a global leader in consulting, engineering, and operations, serving clients across the energy and materials sectors. With 33,000 professionals in approximately 50 countries, the company supports clients throughout the full asset lifecycle. Wood is committed to delivering safe, predictable outcomes, enabling resilient operations, and contributing to a lower carbon future, while striving for net zero through advanced facilities and efficient project delivery worldwide.</p> <h3 >Key Responsibilities</h3> <ul > <li >Manage structural and infrastructure works, including various building construction types, building design, equipment foundation design, and pipe and cable tray support design.</li> <li >Originate new engineering deliverables and revise existing ones.</li> <li >Review and check engineering deliverables to ensure compliance with company procedures, standards, and checklists.</li> <li >Supervise engineering work performed by junior team members.</li> <li >Participate in and conduct job-related training as required.</li> <li >Plan and complete work effectively within allocated man-hours, ensuring timely delivery.</li> <li >Interface, coordinate, and communicate effectively with the Project Manager and other team members.</li> <li >Delegate and distribute work, and manage the billability of the team.</li> <li >Coordinate with all relevant disciplines in the preparation and development of deliverables, ensuring the incorporation of other disciplines' input.</li> <li >Conduct site visits to verify conditions and perform markup drawings or as-built activities.</li> <li >Manage the submission of deliverables, including required quality checks and proper record management.</li> <li >Prepare technical reports and presentations.</li> <li >Conduct technical bid evaluations, vendor document reviews, and subcontract scope management.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >Over <strong >10 years of proven field engineering experience</strong> in site-based or project environments.</li> <li >Strong understanding of engineering, construction, and field operations within industrial or mining projects.</li> <li >Full knowledge of Aramco, Sabic, Royal Commission, SBC, and HCIS standards.</li> </ul> <h3 >Work Environment and Project Scope</h3> <p >This role is integral to the development of a new gold mine and processing facility, requiring a strong presence at a remote site in Saudi Arabia. The Senior Site Structural Engineer will operate within a dynamic project environment, focusing on industrial and mining sector challenges. The position demands practical field engineering experience and a comprehensive understanding of site-based operations.</p> <h3 >Application</h3> <p >Candidates meeting the specified qualifications are encouraged to apply.</p>

<h3 >Overview of the Role</h3> <p >ABIS is seeking a <strong >Fresh Graduate Safety Engineer</strong> to join our team supporting Saudi Aramco - SMP projects in Dhahran. This full-time position is ideal for recent engineering graduates who possess a strong interest in health, safety, and environmental (HSE) practices within construction and industrial project environments. The role focuses on applying fundamental safety principles, ensuring compliance, and contributing to effective risk management strategies.</p> <h3 >Key Responsibilities</h3> <ul > <li >Promote and enforce established safety standards through coordination with project teams, contractors, and site supervisors.</li> <li >Contribute to the implementation of health, safety, and environmental practices on active construction sites.</li> <li >Participate in conducting risk assessments, safety inspections, and incident investigations.</li> <li >Support adherence to relevant safety regulations, industry codes, and company HSE policies.</li> <li >Assist in the identification of potential hazards and contribute to ongoing risk management efforts.</li> </ul> <h3 >Required Qualifications</h3> <ul > <li >Bachelor's degree in any Engineering discipline.</li> <li >Fresh graduate with 0-1 years of professional experience.</li> </ul> <h3 >Essential Skills and Knowledge</h3> <ul > <li >Strong understanding of general workplace safety principles.</li> <li >Awareness of health, safety, and environmental practices specific to construction environments.</li> <li >Knowledge of processes for conducting risk assessments, safety inspections, and incident investigations.</li> <li >Understanding of applicable safety regulations, industry codes, and company HSE policies.</li> <li >Ability to communicate effectively in English, both written and verbal.</li> </ul> <h3 >Preferred Qualifications</h3> <ul > <li >Knowledge of project management principles.</li> <li >NEBOSH certification is highly preferred.</li> </ul> <h3 >Work Environment and Opportunity</h3> <p >This full-time position is based in Dhahran and offers a foundational opportunity for a fresh graduate to commence a career in safety engineering within a significant industrial project context. The role provides exposure to comprehensive health, safety, and environmental practices. Salary for this position will be discussed directly with qualified candidates.</p>

<p>In this role, you contribute to the design, development, and operation of AI-native enterprise applications within fast-moving, customer-embedded delivery teams. You bring solid engineering fundamentals and a growing command of AI and machine learning techniques, applying them to solve real-world business problems under the guidance of senior engineers and technical leads. This is a role for someone early in their AI engineering career who is hungry to learn, eager to contribute, and excited by the challenge of building production-grade solutions that make a tangible difference for enterprise customers.</p><p>In this role, you will:</p><ul><li>Contribute to the development of production-grade, cloud-native applications integrating AI capabilities such as large language models, RAG pipelines, and agent-based components.</li><li>Work within customer projects and cross-functional delivery teams, learning to understand business processes, technical landscapes, and customer needs.</li><li>Implement features, components, and integrations under the guidance of senior engineers, maintaining code quality and adherence to engineering standards.</li><li>Support prototyping, testing, and iteration of AI solutions in customer environments, adapting to feedback and evolving requirements.</li><li>Participate in code reviews, technical discussions, and design sessions, actively developing your engineering skills and knowledge.</li><li>Assist with monitoring, troubleshooting, and improving deployed solutions to ensure reliability and operational stability.</li><li>Contribute to documentation, reusable components, and engineering best practices to support team productivity and knowledge sharing.</li><li>Demonstrate a proactive learning mindset staying current with AI/ML developments and applying new techniques and tools to improve solution quality.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Solid foundational skills in software engineering, with proficiency in Python and hands-on experience in at least one cloud-native development environment.</p><p>Growing understanding of AI and ML concepts, including familiarity with large language models, machine learning frameworks (e.g. TensorFlow, PyTorch, Scikit-learn), and API-based AI services.</p><p>Exposure to data pipelines, MLOps concepts, or AI/ML model integration in application contexts.</p><p>Ability to work collaboratively within a team, follow engineering standards, and take ownership of assigned tasks with a strong sense of accountability.</p><p>Curiosity, adaptability, and a growth mindset you actively seek feedback, learn from experience, and are motivated to grow quickly in a high-pace environment.</p><p>Basic understanding of cloud platforms (e.g. AWS, Azure, GCP) and familiarity with tools such as Git, Docker, and CI/CD pipelines.</p><p>Strong communication skills and the ability to work effectively within cross-functional teams and customer-facing settings.</p><p>An interest in or early exposure to SAP AI technologies such as SAP AI Core or SAP Business Technology Platform (BTP) is a plus.</p>

<p>Product validation, component quality and installation support</p><p><strong>Desired Candidate Profile</strong></p><p>Degree or diploma in Electronic/Electrical Engineering or equivalent, with 4+ years in hardware QA, validation, test, or field engineering.</p><p>Hands-on experience testing and troubleshooting electronic devices; experience with GNSS/GPS, cellular modems, and CAN-bus/OBD-II hardware is a strong advantage.</p><p>Ability to read schematics, datasheets, and wiring diagrams, and to use standard lab and diagnostic tools (multimeter, oscilloscope, logic/diagnostic tools).</p><p>Solid understanding of electronic component quality, common failure modes, and inspection techniques.</p><p>Experience defining test procedures, acceptance criteria, and quality documentation.</p><p>Comfortable driving quality issues, RMAs, and corrective actions through to resolution with manufacturers.</p><p>Strong communication skills, with the ability to guide, train, and support installation technicians in the field.</p>

<ul><li><p><strong>Role</strong>: Telecom Engineer – Substation Telecom Asset Inspections</p></li><li><p><strong>Experience Required</strong>: 8+ years</p></li><li><p><strong>Specialization</strong>: Inspection, quality assurance, and maintenance of substation telecom assets (SDH, OTN-DWDM, Optical Fiber Cables)</p></li><li><p><strong>Contract</strong>: 6 months to 1 year (extendable based on project needs)</p></li><li><p><strong>Expected Joining</strong>: 01 August 2026</p></li><li><p><strong>Salary</strong>: Negotiable, based on qualifications and interview performance</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Minimum 8 years of relevant experience in telecom systems for electrical substations.</p></li><li><p>Proven track record in inspection, QA, maintenance, or commissioning of SDH, OTN-DWDM, and Optical Fiber infrastructure.</p></li><li><p>Strong knowledge of applicable standards, inspection procedures, and documentation.</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Staff Engineer, Product Design and Engineering - Mechanical</b></p><br><p><b>Are you passionate about being part of a successful team?</b></p><br><p><b>Would you like the opportunity to work for a world class oilfield services company?</b></p><br><p><br>&nbsp;<b>Join Our Team!</b></p><br><p><b>Partner with the best</b></p><br><p>As a Staff Engineer - Mechanical, you will be responsible for:</p><br><ul><li>Strategic interaction with customers located in Saudi Arabia (i.e. CSD, Adnoc and more).</li><li>In your role you will build and strong and reliable credibility towards Customers to intercept and share with Engineering team any critical&nbsp;topic that shall be addressed guarantee smooth project execution from early bid phase to commissioning.</li></ul><p>As a Senior Compressor Design Engineer, you will be responsible for:</p><br><ul><li>Actively interacting with strategic Customers located in Saudi Arabia, becoming strategic entry point</li><li>Developing strong and reliable credibility towards Customer, managing critical areas of interest/concern of specific projects</li><li>Developing knowledge of centrifugal compressors technical standards and Customer specifications (i.e. API617, Saudi Aramco’s SAMS and more)</li><li>Supporting Modon shop to fulfill project activities with rigor and respecting on time delivery.</li><li>Providing engineering support to internal teams to assist with activities that span the full, technical project life-cycle (from ITO to Commissioning) with specific focus on projects located in Saudi Arabia</li><li>Overseeing relationships with global and local vendors to manage time-zones and successful on-time delivery of required components</li></ul><p><br><b>Fuel your passion</b></p><br><p>To be successful in this role you will:</p><br><ul><li>Bachelor’s degree in mechanical engineering or a related technical discipline.</li><li>Have a minimum of 10 years of experience in the mechanical engineering.</li><li>Have at least a strong understanding of core disciplines including mechanics, structural dynamics, rotor dynamics, thermodynamics, fluid and aero dynamics, materials science and structural analysis.</li><li>Have demonstrated technical expertise, leadership, and influence skills expected for an individual contributor on complex parallel projects.</li><li>Have extensive technical experience in executing industrial processes such as fluid transport, liquid/gas compression, combustion, or heating and cooling systems.</li><li>Have a proven track record in applying systems engineering methodologies and configuration management in a cross-disciplinary organization.</li><li>Have excellent communication and interpersonal skills to lead technical communities through influence Partners with the best.</li></ul><p><br><b>Work in a way that works for you</b></p><br><p>We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:</p><br><ul><li>Working flexible hours - flexing the times when you work in the day to help you fit everything in and work when you are the most productive</li></ul><p><b>Working with us</b></p><br><p>Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.</p><br><p><b>Working for you</b></p><br><p>Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:</p><br><ul><li>Contemporary work-life balance policies and wellbeing activities</li><li>Comprehensive private medical care options</li><li>Safety net of life insurance and disability programs</li><li>Tailored financial programs</li><li>Additional elected or voluntary benefits</li></ul>The Baker Hughes internal title for this role is: Staff Engineer, Mechanical, Product Design and Engineering </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

We are hiring a Engineer 1 - Electrical Engineering_MB30 If you are interested, please feel free to share your CV to SyedaRashna@lancesoft.com<br>Job Title: - Engineer 1 - Electrical Engineering_MB30Location: - Dhahran Saudi Arabia Duration: -12 Months<br>Essential Responsibilities: -• Primarily responsibility is to create electrical control cabinet design with all necessary documentation according to industry and customer requirements.• Use Micro Station CAD, Autodesk Inventor software to create, revise, review Project Drawings (System Interconnect, Power wiring, Layout drawings, Loop drawings, blocks, etc.)• Compliance to customer specifications for Hardware / Cabinets• Knowledge of industry codes and standards (IEEE, ANSI, NEC, IEC, NFPA).• Assist Project Engineer in customer witness testing of Hardware / Cabinet design functionality.• Follow quality procedures and standard design processes.• Develop detailed bills of material for panels.• Specify parts and develop ordering drawings. Update PE with job completion estimates and status• Incorporate new design techniques to increase efficiency of Cabinet Engineering.• Responsible for executing defect-free designs in a timely manner.• Understanding of the electrical engineering concepts deemed necessary for designing the electrical cabinet• Understanding of NEMA/IP classifications Essential Requirements of the role (Experience / Skills / Competencies): -•Years of experience: 3+ years•Field of experience: 3+ years field / projects / maintenance experience (working with instrumentation, control systems) in energy and/or oil & gas environment or relevant field will be an added advantage.•Tools or Software (Required / Preferred): Proven experience with document layout, formatting, and editing.•Education Qualifications: Bachelors or Diploma in Instrumentation / Electronics / Electrical or equivalent and up to 5+yrs experience.•Industry Background or Experience (Required / Preferred): Knowledge of rotating machinery operation and controls systems. Ability and willingness to travel for site survey<br>Desirable attributes of the worker (Experience / Skills / Competencies):-• Strong preference for individuals experienced in design of Bently Nevada machinery protection cabinet and control products.• Knowledge of Cabinet design engineering,• Knowledge of Bently Nevada machinery protection and management systems products and services.• 3+ years field / projects / maintenance experience (working with instrumentation, control systems) in energy and/or oil & gas environment or relevant field will be an added advantage.• Understanding of ISO 9001 design control standards• Prior experience with utility protection and control design standards• Knowledge of LV control circuit, fuse and circuit breaker coordination• Prior experience following quality assurance processes while working in a projects schedule-driven environment•Important Keywords to be in the CV: Cabinet designer, Hardware engineer,

Job Description<br>We are looking for a Lead BPM & Workflow Automation Engineer to lead the design, development, and implementation of BPM and workflow automation solutions. The role will focus on delivering scalable process orchestration solutions using Camunda 7 and Camunda 8, while ensuring technical quality, integration, governance, and alignment with business requirements.<br><br>Key Responsibilities<br>Lead BPM and workflow automation projects from concept through development, testing, and production. Design and implement BPM and workflow automation solutions using Camunda 7 and Camunda 8. Define technical architecture and integration strategies for workflow and process automation solutions. Develop process orchestration solutions and integrate workflows with enterprise systems. Lead migration initiatives between BPM platforms and support the transition of existing workflows and processes. Review technical designs, development approaches, and code quality to ensure adherence to technical standards and best practices. Mentor development teams and provide technical guidance and training. Collaborate with business stakeholders to analyze, optimize, and automate business processes. Establish and maintain BPM governance, standards, development guidelines, and best practices. Prepare and maintain technical documentation, ensuring it is updated with the latest enhancements and releases. Assist in reviewing and improving the existing technical architecture, including design patterns and development practices. Work in compliance with the full Software Development Life Cycle (SDLC). Design database structures and develop efficient SQL queries to support BPM and workflow solutions. Troubleshoot technical issues and contribute to the performance, stability, and continuous improvement of workflow solutions.<br><br>Job Requirements<br>Bachelor’s degree in Computer Science, Software Engineering, Information Technology, or a related field.4–7 years of relevant experience in BPM, workflow automation, software development, or a related technical field. Hands-on experience with Camunda 7 and Camunda 8. Strong knowledge of BPM, BPMN, workflow automation, and process orchestration. Experience in technical architecture, system integration, and API-based integrations. Strong database knowledge, including database design and SQL queries. Experience with software development practices and the SDLC. Experience in technical design and code reviews. Strong problem-solving and analytical skills. Ability to mentor developers and provide technical guidance. Strong communication and collaboration skills with technical and business stakeholders. Good command of English.

<h3 >About the Role</h3> <p >FNRCO is seeking a <strong >Senior Splunk SIEM Engineer Managed Services Consultant</strong> to join their team in Makkah, with work locations including Jeddah and Makkah. This full-time role requires a professional with 5-10 years of experience in Splunk Enterprise and SIEM environments, focusing on administration, security use case development, and operational support.</p> <h3 >Key Responsibilities</h3> <ul > <li >Administer the Splunk Enterprise environment, including solution deployment, user management, license management, upgrades, patch deployment, and managing log sources.</li> <li >Onboard new log sources and troubleshoot issues if logs are not being sent to Splunk.</li> <li >Develop security use cases using Splunk Enterprise Security and construct SIEM content such as correlation rules, reports, and queries.</li> <li >Manage support tickets with SIEM support as necessary.</li> <li >Periodically review existing Splunk configurations and propose enhancements.</li> <li >Continuously review and develop use cases, dashboards, alerts, and reports.</li> <li >Create and add custom correlation rules for devices based on business requirements.</li> <li >Support audits conducted by regulators in the Kingdom by providing relevant evidence from the SIEM solution.</li> <li >Develop parsing rules for non-standard logs.</li> <li >Configure threat feeds, IoCs, Sigma rules, and advisories from regulators and globally recognized organizations.</li> <li >Administer the Splunk UBA environment, including ingesting CIM-compliant data, raw events, and HR data.</li> <li >Manage UBA health using the Splunk UBA Monitoring App and perform backups/failovers.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of <strong >5 years of experience</strong> in Splunk Enterprise administration and SIEM engineering is required, with a preference for candidates having 5-10 years of experience.</li> <li >Demonstrated experience in the deployment, configuration, and management of Splunk Enterprise environments.</li> <li >Proficiency in developing security use cases and SIEM content.</li> <li >Experience with Splunk UBA administration and data ingestion.</li> </ul> <h3 >Work Environment</h3> <p >This is a <strong >full-time position</strong> based in the Makkah region, with responsibilities covering both Jeddah and Makkah. The role involves working within a managed services framework, providing critical support and development for security information and event management systems.</p> <h3 >Application Process</h3> <p >Candidates who meet the specified requirements are encouraged to apply. Salary details will be discussed during the interview process.</p>

<h3 >About the Role</h3> <p >Bupa Arabia is seeking a <strong >Manager - FWA AI Engineer</strong> to join their team in Jeddah. This full-time role focuses on designing, building, testing, and deploying AI solutions to support Fraud, Waste &amp; Abuse (FWA) detection and investigation. The position requires 2-5 years of relevant experience.</p> <h3 >Role Purpose and Context</h3> <p >The FWA AI Engineer is responsible for translating approved business requirements and data science models into scalable production solutions. This involves integrating AI capabilities into operational workflows while ensuring reliability, performance, and business value. The role collaborates closely with the FWA Lead, FWA Data Scientist, investigators, and business stakeholders to implement and continuously enhance FWA AI use cases.</p> <h3 >Key Responsibilities</h3> <ul > <li >Assess the technical feasibility of approved FWA use cases, evaluating data availability, technical requirements, and implementation complexity.</li> <li >Define solution approaches for AI-driven FWA detection, developing technical requirements and implementation plans, and recommending optimal AI techniques and technologies.</li> <li >Build and optimize AI solutions for FWA detection and investigation, translating models into scalable cloud-native solutions on GCP.</li> <li >Implement machine learning, anomaly detection, graph analytics, and document intelligence solutions, developing necessary APIs, scoring services, and integration components.</li> <li >Deploy AI solutions into operational environments, integrating AI outputs with internal systems and workflows, and coordinating with Data Engineering and TIDES (IT) teams.</li> <li >Conduct technical testing of AI solutions, support user acceptance testing, validate output accuracy and performance, and resolve implementation issues.</li> <li >Support ongoing enhancement of deployed FWA AI solutions, implementing model improvements, addressing technical issues, and incorporating new capabilities and requirements.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >2-5 years of experience in a relevant field.</li> <li >Proven ability to design, build, test, and deploy AI solutions.</li> <li >Experience with cloud-native solutions, preferably on GCP.</li> <li >Familiarity with machine learning, anomaly detection, graph analytics, and document intelligence.</li> </ul> <h3 >Required Skills</h3> <ul > <li >Strong analytical and problem-solving skills.</li> <li >Ability to translate business requirements into technical solutions.</li> <li >Excellent collaboration and communication skills for working with cross-functional teams and stakeholders.</li> <li >Proficiency in ensuring solution scalability, maintainability, and adherence to technical standards.</li> </ul> <h3 >Application Process</h3> <p >Candidates interested in this full-time position are encouraged to apply. The salary for this role will be discussed during the interview process.</p>

<h3 >About the Role</h3> <p >Petrocon Engineers &amp; Consultant is seeking an experienced <strong >DCS SCADA &amp; Automation Commissioning Engineer</strong> to join their team. This full-time position is based in Tabuk, Saudi Arabia, with a focus on supporting the AMAALA Project. The role involves critical commissioning, start-up, system validation, and operational readiness activities.</p> <h3 >Key Responsibilities</h3> <ul > <li >Execute DCS, PLC, SCADA, and automation commissioning activities.</li> <li >Perform Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT), loop checks, functional testing, and troubleshooting.</li> <li >Support plant commissioning, start-up, and operational readiness initiatives.</li> <li >Troubleshoot control system issues and conduct root-cause analysis.</li> <li >Coordinate effectively with engineering, construction, operations teams, and vendors.</li> <li >Support control system integration and field instrumentation interfaces.</li> <li >Assist with system handover processes, documentation, and operator training.</li> </ul> <h3 >Required Experience and Qualifications</h3> <ul > <li >A minimum of <strong >5 to 10 years of relevant experience</strong> is required.</li> <li >Mandatory hands-on experience with <strong >Siemens SIMATIC PCS 7 V10</strong>.</li> <li >Strong hands-on experience in DCS, SCADA, PLC, and industrial automation.</li> <li >Significant exposure to FAT, SAT, loop checking, and functional testing procedures.</li> <li >Experience in water treatment, desalination/RO, wastewater/STP, utilities, or industrial infrastructure projects is preferred.</li> </ul> <h3 >Work Location</h3> <p >This role is based in <strong >Tabuk, Saudi Arabia</strong>, with potential assignments in Al Wajh, supporting the AMAALA Project.</p> <h3 >Employment Type</h3> <p >This is a <strong >full-time</strong> position. Salary details will be disclosed during the interview process.</p>

<h3 >About the Role</h3> <p >Weatherford is seeking a <strong >Field Engineer III – Managed Pressure Drilling (MPD)</strong> to join their team in Saudi Arabia. This full-time role involves planning, executing, and optimizing Managed Pressure Drilling operations at customer well sites. The Field Engineer III will provide advanced engineering expertise, operational leadership, and technical support to ensure safe, efficient, and reliable drilling performance while adhering to customer expectations, company standards, and regulatory requirements. This position serves as the primary engineering resource for complex onshore and offshore MPD projects, working closely with customers, drilling contractors, and internal teams.</p> <h3 >Key Responsibilities</h3> <ul > <li >Lead the execution of Managed Pressure Drilling (MPD) operations according to approved engineering programs, operational procedures, and HSE standards.</li> <li >Provide real-time engineering support during drilling, tripping, casing running, cementing, and other well construction activities requiring MPD.</li> <li >Monitor, analyze, and optimize drilling parameters, hydraulic performance, and pressure data to maintain wellbore pressure control.</li> <li >Operate and oversee automated MPD control systems to maintain target bottom-hole pressure throughout drilling operations.</li> <li >Develop engineering recommendations and operational adjustments based on real-time well conditions and technical analysis.</li> <li >Support pre-job planning, hazard identification, risk assessments, and technical reviews with customers and internal stakeholders.</li> <li >Supervise the rig-up, pressure testing, commissioning, troubleshooting, maintenance, and rig-down of MPD equipment.</li> <li >Coordinate field activities with drilling supervisors, company representatives, rig personnel, and service providers to ensure seamless operations.</li> <li >Investigate operational issues and equipment failures, perform root cause analysis, and implement corrective and preventive actions.</li> <li >Prepare accurate daily operational reports, engineering analyses, end-of-well reports, and lessons learned documentation.</li> <li >Ensure compliance with company HSE policies, customer requirements, API standards, and industry best practices.</li> <li >Mentor and provide technical guidance to junior Field Engineers and Field Specialists.</li> <li >Support equipment commissioning, new technology implementation, inventory management, and continuous improvement initiatives.</li> <li >Maintain equipment readiness and support mobilization planning for upcoming projects.</li> <li >Build and maintain strong customer relationships by delivering high-quality technical support and operational excellence.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >5-10 years of experience in a relevant field.</li> <li >Strong knowledge of Managed Pressure Drilling (MPD) technologies, equipment, and operational applications.</li> <li >Thorough understanding of well control principles, drilling hydraulics, and surface back-pressure management.</li> <li >Experience with Rotating Control Devices (RCD), MPD choke systems, Coriolis flow measurement systems, and automated MPD control systems.</li> <li >Proficiency in hydraulic modeling, pressure analysis, and interpretation of real-time drilling data.</li> <li >Ability to troubleshoot mechanical, hydraulic, electrical, instrumentation, and operational issues under demanding field conditions.</li> <li >Knowledge of drilling data acquisition systems and digital drilling technologies.</li> </ul> <h3 >Work Environment</h3> <p >This is a full-time position based in Saudi Arabia, requiring field operations at customer well sites, which may include both onshore and offshore projects. The role involves working in demanding field conditions and coordinating with various stakeholders.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>A specialized engineering professional responsible for designing, programming, and commissioning automated building management systems with a strong emphasis on the Niagara N4 framework. They integrate critical low-current and IoT subsystems—such as HVAC, lighting, fire alarms, and access control—using industry-standard protocols like BACnet and Modbus. By developing user-friendly graphic dashboards and automation sequences, they optimize building energy efficiency, system performance, and operational reliability. Additionally, they manage field hardware deployment, ensure cybersecurity compliance, and collaborate closely with MEP teams and subcontractors throughout project lifecycles.</p><br><ul><li>Design and develop BMS architecture based on project requirements.</li><li>Install and configure BMS hardware and software (controllers, sensors, actuators).</li><li>Program control logic and automation sequences for HVAC, lighting, and other subsystems.</li><li>Test and commission BMS systems to ensure functionality and performance.</li><li>Monitor and optimize energy consumption using BMS analytics.</li><li>Integrate third-party systems (e.g., fire alarm, access control, elevators) via Modbus, BACnet, or SNMP.</li><li>Troubleshoot and resolve faults in BMS systems and connected field devices.</li><li>Conduct site surveys and system inspections for retrofit or upgrade projects.</li><li>Maintain and update BMS graphics interfaces for real-time monitoring.</li><li>Collaborate with MEP, HVAC, and electrical teams during project execution.</li><li>Perform preventive and corrective maintenance on BMS hardware and software.</li><li>Support remote monitoring and system diagnostics using IoT platforms.</li><li>Generate reports on energy performance, fault logs, and system alarms.</li><li>Provide technical support and training to operators and end-users.</li><li>Select suitable sensors, actuators, and controllers for specific applications.</li><li>Verify compliance with standards such as ASHRAE, ISO, and local codes.</li><li>Ensure cybersecurity best practices in BMS networks and remote access points.</li><li>Manage subcontractors and vendors during BMS installation and commissioning.</li><li>Document system schematics, as-built drawings, and O&amp;M manuals.</li><li>Continuously evaluate system performance and suggest improvements for efficiency and reliability.</li><li>Develop and deploy control strategies using Niagara N4 framework for HVAC, lighting, and energy systems.</li><li>Create custom dashboards, alarms, and trend logs within Niagara N4 for real-time system monitoring and analytics.</li></ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>