.NET Developers Jobs in Saudi

<p>Install, maintain, and repair air conditioning, ventilation, and refrigeration systems. Diagnose faults and perform troubleshooting on HVAC equipment and control systems. Conduct preventive and corrective maintenance to maximize system performance and reliability. Inspect equipment and identify worn or defective components for replacement. Test system performance, including electrical, mechanical, and refrigerant components. Recharge refrigerant systems in accordance with environmental and safety regulations. Read and interpret technical manuals, wiring diagrams, and mechanical drawings. Ensure compliance with health, safety, and environmental standards during all work activities. Maintain accurate service reports, maintenance records, and equipment documentation. Respond promptly to emergency repair requests and equipment breakdowns. Coordinate with supervisors, engineers, and other maintenance personnel to complete work efficiently.</p><p><strong>Desired Candidate Profile</strong></p><p>High school diploma or equivalent; technical or vocational certification in HVAC/R is preferred. Valid HVAC/A/C Technician certification or license (where required). Proven experience in installing and maintaining air conditioning and refrigeration systems. Strong knowledge of HVAC systems, electrical controls, refrigeration cycles, and mechanical components. Ability to read wiring diagrams, blueprints, and technical manuals. Proficiency in using HVAC diagnostic tools, testing equipment, and hand tools. Good troubleshooting and problem-solving skills.</p>

<h3 >About El Seif Engineering Contracting Company</h3> <p >El Seif Engineering Contracting Company operates with core values of <strong >excellence, integrity, and innovation</strong>. With five decades of experience across diverse industries, the company has developed expertise in managing complex construction challenges and delivering results. El Seif is recognized as a trusted partner in the construction sector, focusing on sustainable and impactful solutions.</p> <h3 >The Opportunity: Site Architect (C&amp;A)</h3> <p >El Seif Engineering Contracting Company is seeking a <strong >Site Architect (C&amp;A)</strong> for a full-time position. This role requires an experienced professional with strong expertise in fit-out works, site supervision, and multidisciplinary coordination. The Site Architect will be responsible for ensuring architectural and fit-out works are executed in compliance with approved drawings, specifications, quality standards, and overall project requirements.</p> <h3 >Key Responsibilities</h3> <ul > <li >Supervise and monitor architectural and fit-out works on site to ensure compliance with approved drawings, specifications, and project standards.</li> <li >Coordinate daily site activities with contractors, consultants, subcontractors, and other disciplines.</li> <li >Review and manage material submittals, technical submissions, samples, and approval processes.</li> <li >Review shop drawings, architectural details, and coordinated drawings, ensuring compliance with design intent and project requirements.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >Minimum of <strong >8–12 years of relevant experience</strong>, preferably gained on major construction, commercial, hospitality, residential, or high-end fit-out projects.</li> <li >Proven experience in large-scale or fast-track construction projects.</li> <li >Demonstrated experience with high-quality architectural finishes and detailed fit-out works.</li> <li >Experience coordinating with international consultants and multiple subcontractors.</li> </ul> <h3 >Essential Skills and Knowledge</h3> <ul > <li >Strong hands-on experience in fit-out works and architectural site supervision.</li> <li >Proficient knowledge of material submittals, specifications, shop drawings, Requests for Information (RFIs), and consultant approval processes.</li> <li >Excellent coordination skills for effective collaboration with consultants, contractors, subcontractors, and multidisciplinary project teams.</li> <li >Ability to identify and resolve architectural, technical, and site coordination issues efficiently.</li> <li >Strong understanding of construction methods, architectural detailing, finishes, and fit-out materials.</li> <li >Effective communication, reporting, and problem-solving abilities.</li> <li >Demonstrated ability to work effectively under pressure and meet project deadlines.</li> <li >Knowledge of relevant international and local construction standards and specifications.</li> </ul> <h3 >Application Process</h3> <p >Candidates who meet the above qualifications are encouraged to apply for this full-time position.</p>

<p>Install, maintain, and repair air conditioning, ventilation, and refrigeration systems. Diagnose faults and perform troubleshooting on HVAC equipment and control systems. Conduct preventive and corrective maintenance to maximize system performance and reliability. Inspect equipment and identify worn or defective components for replacement. Test system performance, including electrical, mechanical, and refrigerant components. Recharge refrigerant systems in accordance with environmental and safety regulations. Read and interpret technical manuals, wiring diagrams, and mechanical drawings. Ensure compliance with health, safety, and environmental standards during all work activities. Maintain accurate service reports, maintenance records, and equipment documentation. Respond promptly to emergency repair requests and equipment breakdowns. Coordinate with supervisors, engineers, and other maintenance personnel to complete work efficiently.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent; technical or vocational certification in HVAC/R is preferred.</li><li>Valid HVAC/A/C Technician certification or license (where required).</li><li>Proven experience in installing and maintaining air conditioning and refrigeration systems.</li><li>Strong knowledge of HVAC systems, electrical controls, refrigeration cycles, and mechanical components.</li><li>Ability to read wiring diagrams, blueprints, and technical manuals.</li><li>Proficiency in using HVAC diagnostic tools, testing equipment, and hand tools.</li><li>Good troubleshooting and problem-solving skills.</li><li>Experience is an asset</li><li>Strong interpersonal and problem solving abilities</li><li>Fluency in English, additional languages are a plus</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>About the job</strong></p><br><p>Join our Team - Your career journey starts here – not just a job, but a future.</p><br><p><strong>Our Potential Opportunity</strong></p><br><p>INTECH Automation Intelligence is seeking an <strong>Electrical - I&amp;C Construction Site Supervisor </strong>to join our dynamic Automation team. This role is pivotal in delivering advanced industrial automation and control solutions across industries such as Oil &amp; Gas, Petrochemicals, Utilities, and Manufacturing.</p><br><p>At INTECH, you will contribute to complex automation projects involving PLC, SCADA, DCS, SIS, FGS, OSI PI Systems, and Wellhead Automation solutions. You will play a key role throughout the project lifecycle, from engineering and design to commissioning, troubleshooting, startup, and final handover.</p><br><p>INTECH masters the art of Process Automation by delivering vendor-neutral, customized control, safety, and automation systems tailored to meet the needs of diverse industries. From wellhead automation and integrated control systems to industrial digitalization and plant optimization, INTECH’s solutions empower industries to improve operational efficiency, reliability, and performance.</p><br><p><strong>What You’ll Lead and Delive</strong>r:</p><br><ul><li>Lead site execution of electrical and I&amp;C works including demolition, installation, termination, and testing.</li><li>Lead and supervise the installation of cable trays and conduits ensuring proper routing, bending, sealing, and support as per standards.</li><li>Lead and supervise the&nbsp;proper cable pulling and laying (power, control, instrumentation, and fiber optic cables), tagging, glanding, and termination based on cable schedules and approved loop drawings.</li><li>Lead and supervise the installation of field instruments (pressure, flow, temperature, level, analyzers)</li><li>Lead and supervise the installation of junction boxes (JBs), marshaling panels, PLC control panels, etc.</li><li>Lead and supervise the loop wiring test, termination checking, labeling/tagging, and continuity/megger testing.</li><li>Lead and supervise the installation and termination of PLC systems (Siemens, Allen-Bradley, Schneider, etc.), HMI panels, and communication interfaces.</li><li>Coordinate with other subcontractors for the execution of civil/mechanical works</li><li>Ensure proper allocation of manpower, tools, and materials to meet project needs.</li><li>Ensure compliance with engineering standards (SAES, SAMSS, SES) and safety procedures.</li><li>Supervise daily activities, manage technicians and laborer's, and coordinate with QA/QC, HSE, and planning teams.</li><li>Perform loop checks, cable testing (continuity, insulation), calibration, I/O verification, and system integration.</li><li>Support pre-commissioning and commissioning activities per SABIC/Aramco procedures.</li><li>Collaborate with civil and mechanical teams.</li><li>Prepare and review ITPs, method statements, and QA/QC documentation.</li><li>Maintain accurate records including redlines, test reports, and progress logs.</li><li>Conduct site visits for scope assessment and assist in BOQ preparation and resource estimation.</li><li>Promote a strong safety culture through toolbox talks, inductions, and compliance with HSE plans.</li><li>Conducting the site visits for evaluation of construction scope for new project</li><li>Assist estimation team in preparing the BOQ, estimation of site days and required man-days</li></ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 2+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Position Summary The Lead Instrumentation & Control (I&C) Commissioning Engineer represents the Owner during the commissioning phase of a utility-scale Combined Cycle Gas Turbine (CCGT) Power Plant. The role is responsible for providing technical oversight of the EPC Contractor’s Instrumentation & Control commissioning activities, ensuring all work is executed safely, in accordance with the EPC Contract, Owner’s Technical Specifications (OTS), OEM recommendations, project procedures, and applicable international standards.<br>The position focuses on field instrumentation, package control systems, PLCs, Safety Instrumented Systems (SIS), Fire & Gas Systems (F&G), and associated interfaces. The role works closely with the Lead DCS Commissioning Engineer, who has primary responsibility for oversight of the Distributed Control System (DCS), including system architecture, software configuration, networking, and overall control system functionality.<br>The Lead I&C Commissioning Engineer provides technical leadership, identifies commissioning risks, monitors EPC performance, witnesses critical commissioning activities, and supports the successful achievement of project milestones through to Commercial Operation Date (COD).<br>Key Responsibilities Commissioning Oversight Provide technical oversight of the EPC Contractor’s Instrumentation & Control commissioning activities. Monitor commissioning progress to ensure compliance with approved procedures, project schedule, and contractual requirements. Verify commissioning activities are carried out in accordance with the Owner’s Technical Specifications (OTS), EPC Contract, OEM recommendations, and applicable international standards. Witness critical commissioning activities and provide technical recommendations for Owner acceptance. Identify technical risks and recommend mitigation measures to the Commissioning Manager. Monitor EPC Contractor performance and raise concerns regarding quality, safety, schedule, or technical compliance.<br>Engineering & Documentation Review Review and provide technical comments on the EPC Contractor’s:Commissioning Procedures Method Statements Commissioning Schedules Functional Test Procedures Loop Check Procedures Cause & Effect Test Procedures Startup Procedures SAT Documentation Turnover Packages Commissioning Reports Red-Line Drawings As-Built Documentation. Ensure all documentation complies with project requirements before commissioning activities commence.<br>Field Instrumentation Provide technical oversight of commissioning activities related to:Pressure Instruments Temperature Instruments Flow Instruments Level Instruments Analytical Instruments Smart Field Devices Control Valves Motor Operated Valves (MOVs) On-Off Valves Instrument Air Systems Sampling Systems Instrument Calibration Instrument Reinstatement Loop Checking Field Verification Ensure commissioning activities are completed in accordance with approved procedures and project specifications.<br>Package Control Systems Oversee commissioning of package-mounted PLC and local control systems, including but not limited to:Water Treatment Plant Fuel Gas System Air Compressors Fire Protection Systems HVAC Systems Chemical Dosing Systems Diesel Generator Controls Auxiliary Boilers (where applicable) Balance of Plant Packages Verify successful integration between package control systems and the plant DCS.<br>Functional Testing Witness and monitor:Loop Checks Functional Testing Interlock Testing Permissive Testing Cause & Effect Testing Sequence Testing Valve Stroke Testing Instrument Functional Testing Package Interface Testing Integrated System Testing Coordinate closely with the Lead DCS Commissioning Engineer during integrated testing activities.<br>Safety Instrumented Systems (SIS) & Fire & Gas (F&G) Provide technical oversight of:SIS Field Devices Fire & Gas Detection Devices Functional Testing Proof Testing Interface Testing Final Acceptance Testing Ensure compliance with Functional Safety requirements and project specifications.<br>Mechanical Completion & System Turnover Participate in Mechanical Completion inspections. Support Ready for Commissioning (RFC) verification. Participate in system walkdowns. Monitor I&C punch list close-out. Review turnover dossiers. Support System Completion (ECC/TOP) activities. Verify system readiness for Owner acceptance.<br>Startup & Performance Testing Monitor and witness EPC Contractor activities during:Cold Commissioning Hot Commissioning First Energization First Fire First Synchronization Load Rejection Tests Reliability Run Performance Testing Commercial Operation Readiness Provide technical recommendations to the Commissioning Manager regarding system readiness and acceptance.<br>Interface Management Coordinate closely with:Lead DCS Commissioning Engineer Lead Electrical Commissioning Engineer Lead Mechanical Commissioning Engineer Construction Team Engineering Team Quality Team HSE Team Planning & Controls Manager System Completion (ECC/TOP) Team EPC Contractor OEM Representatives Owner’s Engineer LOTO Coordinator. Ensure effective coordination across all commissioning disciplines.<br>Reporting Monitor commissioning progress against the approved schedule. Identify technical issues affecting commissioning progress. Report commissioning risks and recommend mitigation measures. Review of EPC commissioning reports. Prepare Owner observations and recommendations. Support weekly and monthly commissioning progress reporting.<br>Health, Safety & Quality Promote a Zero Harm safety culture. Ensure compliance with project HSE requirements. Verify commissioning activities are conducted under approved Permit-to-Work (PTW) and Lock Out/Tag Out (LOTO) procedures. Ensure compliance with project Quality Management requirements. Promote safe commissioning practices throughout all project phases.<br>Qualifications Bachelor’s Degree in Instrumentation Engineering, Control Engineering, Electrical Engineering, Electronics Engineering, or an equivalent engineering discipline from a recognized university. Professional Engineer (PE), Chartered Engineer (CEng), or equivalent professional registration is desirable. Certification or formal training in Functional Safety (IEC 61511), ISA, or equivalent is considered an advantage. Excellent written and verbal communication skills in English.<br>Experience Minimum 12 years of direct Instrumentation & Control commissioning experience in utility-scale Combined Cycle Gas Turbine (CCGT) power plants. Minimum 5 years of experience as a Lead I&C Commissioning Engineer or in a comparable senior commissioning leadership role. Proven experience in commissioning at least two utility-scale Combined Cycle Power Plants, including one project with an installed capacity of 1,900 MW or greater. Demonstrated experience across the full commissioning lifecycle, including:Construction Support Mechanical Completion Pre-Commissioning Commissioning First Fire First Synchronization Reliability Run Performance Testing Commercial Operation (COD) Previous experience representing the Owner, Owner’s Engineer, or EPC Contractor on major power generation projects. Demonstrated experience in overseeing EPC Contractor commissioning activities and coordinating with OEMs and package vendors. Strong experience with System Completion processes, including Mechanical Completion, Ready for Commissioning (RFC), ECC/TOP, Turnover, and Handover.<br>Technical Competencies Demonstrated experience with:Field Instrumentation Instrument Calibration Loop Checking Smart Instruments Control Valves Motor Operated Valves (MOVs) Instrument Air Systems Package PLC Systems Safety Instrumented Systems (SIS) Fire & Gas Systems (F&G) Turbine Package Interfaces HRSG Instrumentation Balance of Plant Instrumentation Communication Protocols (Modbus, Profibus, Foundation Fieldbus, HART, Ethernet/IP or equivalent) Functional Testing Cause & Effect Verification Interlock Testing System Integration Testing Commissioning Documentation System Turnover and Handover<br>Knowledge Sound knowledge of:Combined Cycle Power Plant systems and operation Commissioning management principles EPC Contract Execution Owner’s Technical Specifications (OTS) OEM commissioning requirements IEC Standards ISA Standards IEEE Standards (as applicable) Functional Safety (IEC 61511) Quality Management Systems (ISO 9001) HSE Management Systems Permit-to-Work (PTW) Lock Out/Tag Out (LOTO)<br>Key Competencies Technical Leadership Commissioning Management Planning and Organizing Analytical Thinking Problem Solving Decision Making Communication and Presentation Skills Stakeholder Management Teamwork and Collaboration Negotiation and Conflict Resolution Attention to Detail Safety Leadership Quality Focus Results Orientation<br>Key Performance Indicators (KPIs) Zero Lost Time Incidents (LTI) are attributable to I&C commissioning activities. I&C commissioning activities completed in accordance with the approved project schedule. Successful completion of all loop checks, functional tests, and integrated system tests. Timely closure of I&C punch list items. Successful completion of startup, synchronization, reliability run, and performance testing milestones. Timely completion of System Completion (ECC/TOP) and Owner handover activities. Effective oversight of EPC Contractor commissioning performance. Timely identification and mitigation of commissioning risks. High-quality commissioning documentation and turnover packages. Positive collaboration with internal stakeholders, EPC Contractor, OEMs, and Owner’s Engineer.

Position Summary The Lead Instrumentation & Control (I&C) Commissioning Engineer represents the Owner during the commissioning phase of a utility-scale Combined Cycle Gas Turbine (CCGT) Power Plant. The role is responsible for providing technical oversight of the EPC Contractor’s Instrumentation & Control commissioning activities, ensuring all work is executed safely, in accordance with the EPC Contract, Owner’s Technical Specifications (OTS), OEM recommendations, project procedures, and applicable international standards.<br>The position focuses on field instrumentation, package control systems, PLCs, Safety Instrumented Systems (SIS), Fire & Gas Systems (F&G), and associated interfaces. The role works closely with the Lead DCS Commissioning Engineer, who has primary responsibility for oversight of the Distributed Control System (DCS), including system architecture, software configuration, networking, and overall control system functionality.<br>The Lead I&C Commissioning Engineer provides technical leadership, identifies commissioning risks, monitors EPC performance, witnesses critical commissioning activities, and supports the successful achievement of project milestones through to Commercial Operation Date (COD).<br>Key Responsibilities Commissioning Oversight Provide technical oversight of the EPC Contractor’s Instrumentation & Control commissioning activities. Monitor commissioning progress to ensure compliance with approved procedures, project schedule, and contractual requirements. Verify commissioning activities are carried out in accordance with the Owner’s Technical Specifications (OTS), EPC Contract, OEM recommendations, and applicable international standards. Witness critical commissioning activities and provide technical recommendations for Owner acceptance. Identify technical risks and recommend mitigation measures to the Commissioning Manager. Monitor EPC Contractor performance and raise concerns regarding quality, safety, schedule, or technical compliance.<br>Engineering & Documentation Review Review and provide technical comments on the EPC Contractor’s:Commissioning Procedures Method Statements Commissioning Schedules Functional Test Procedures Loop Check Procedures Cause & Effect Test Procedures Startup Procedures SAT Documentation Turnover Packages Commissioning Reports Red-Line Drawings As-Built Documentation. Ensure all documentation complies with project requirements before commissioning activities commence.<br>Field Instrumentation Provide technical oversight of commissioning activities related to:Pressure Instruments Temperature Instruments Flow Instruments Level Instruments Analytical Instruments Smart Field Devices Control Valves Motor Operated Valves (MOVs) On-Off Valves Instrument Air Systems Sampling Systems Instrument Calibration Instrument Reinstatement Loop Checking Field Verification Ensure commissioning activities are completed in accordance with approved procedures and project specifications.<br>Package Control Systems Oversee commissioning of package-mounted PLC and local control systems, including but not limited to:Water Treatment Plant Fuel Gas System Air Compressors Fire Protection Systems HVAC Systems Chemical Dosing Systems Diesel Generator Controls Auxiliary Boilers (where applicable) Balance of Plant Packages Verify successful integration between package control systems and the plant DCS.<br>Functional Testing Witness and monitor:Loop Checks Functional Testing Interlock Testing Permissive Testing Cause & Effect Testing Sequence Testing Valve Stroke Testing Instrument Functional Testing Package Interface Testing Integrated System Testing Coordinate closely with the Lead DCS Commissioning Engineer during integrated testing activities.<br>Safety Instrumented Systems (SIS) & Fire & Gas (F&G) Provide technical oversight of:SIS Field Devices Fire & Gas Detection Devices Functional Testing Proof Testing Interface Testing Final Acceptance Testing Ensure compliance with Functional Safety requirements and project specifications.<br>Mechanical Completion & System Turnover Participate in Mechanical Completion inspections. Support Ready for Commissioning (RFC) verification. Participate in system walkdowns. Monitor I&C punch list close-out. Review turnover dossiers. Support System Completion (ECC/TOP) activities. Verify system readiness for Owner acceptance.<br>Startup & Performance Testing Monitor and witness EPC Contractor activities during:Cold Commissioning Hot Commissioning First Energization First Fire First Synchronization Load Rejection Tests Reliability Run Performance Testing Commercial Operation Readiness Provide technical recommendations to the Commissioning Manager regarding system readiness and acceptance.<br>Interface Management Coordinate closely with:Lead DCS Commissioning Engineer Lead Electrical Commissioning Engineer Lead Mechanical Commissioning Engineer Construction Team Engineering Team Quality Team HSE Team Planning & Controls Manager System Completion (ECC/TOP) Team EPC Contractor OEM Representatives Owner’s Engineer LOTO Coordinator. Ensure effective coordination across all commissioning disciplines.<br>Reporting Monitor commissioning progress against the approved schedule. Identify technical issues affecting commissioning progress. Report commissioning risks and recommend mitigation measures. Review of EPC commissioning reports. Prepare Owner observations and recommendations. Support weekly and monthly commissioning progress reporting.<br>Health, Safety & Quality Promote a Zero Harm safety culture. Ensure compliance with project HSE requirements. Verify commissioning activities are conducted under approved Permit-to-Work (PTW) and Lock Out/Tag Out (LOTO) procedures. Ensure compliance with project Quality Management requirements. Promote safe commissioning practices throughout all project phases.<br>Qualifications Bachelor’s Degree in Instrumentation Engineering, Control Engineering, Electrical Engineering, Electronics Engineering, or an equivalent engineering discipline from a recognized university. Professional Engineer (PE), Chartered Engineer (CEng), or equivalent professional registration is desirable. Certification or formal training in Functional Safety (IEC 61511), ISA, or equivalent is considered an advantage. Excellent written and verbal communication skills in English.<br>Experience Minimum 12 years of direct Instrumentation & Control commissioning experience in utility-scale Combined Cycle Gas Turbine (CCGT) power plants. Minimum 5 years of experience as a Lead I&C Commissioning Engineer or in a comparable senior commissioning leadership role. Proven experience in commissioning at least two utility-scale Combined Cycle Power Plants, including one project with an installed capacity of 1,900 MW or greater. Demonstrated experience across the full commissioning lifecycle, including:Construction Support Mechanical Completion Pre-Commissioning Commissioning First Fire First Synchronization Reliability Run Performance Testing Commercial Operation (COD) Previous experience representing the Owner, Owner’s Engineer, or EPC Contractor on major power generation projects. Demonstrated experience in overseeing EPC Contractor commissioning activities and coordinating with OEMs and package vendors. Strong experience with System Completion processes, including Mechanical Completion, Ready for Commissioning (RFC), ECC/TOP, Turnover, and Handover.<br>Technical Competencies Demonstrated experience with:Field Instrumentation Instrument Calibration Loop Checking Smart Instruments Control Valves Motor Operated Valves (MOVs) Instrument Air Systems Package PLC Systems Safety Instrumented Systems (SIS) Fire & Gas Systems (F&G) Turbine Package Interfaces HRSG Instrumentation Balance of Plant Instrumentation Communication Protocols (Modbus, Profibus, Foundation Fieldbus, HART, Ethernet/IP or equivalent) Functional Testing Cause & Effect Verification Interlock Testing System Integration Testing Commissioning Documentation System Turnover and Handover<br>Knowledge Sound knowledge of:Combined Cycle Power Plant systems and operation Commissioning management principles EPC Contract Execution Owner’s Technical Specifications (OTS) OEM commissioning requirements IEC Standards ISA Standards IEEE Standards (as applicable) Functional Safety (IEC 61511) Quality Management Systems (ISO 9001) HSE Management Systems Permit-to-Work (PTW) Lock Out/Tag Out (LOTO)<br>Key Competencies Technical Leadership Commissioning Management Planning and Organizing Analytical Thinking Problem Solving Decision Making Communication and Presentation Skills Stakeholder Management Teamwork and Collaboration Negotiation and Conflict Resolution Attention to Detail Safety Leadership Quality Focus Results Orientation<br>Key Performance Indicators (KPIs) Zero Lost Time Incidents (LTI) are attributable to I&C commissioning activities. I&C commissioning activities completed in accordance with the approved project schedule. Successful completion of all loop checks, functional tests, and integrated system tests. Timely closure of I&C punch list items. Successful completion of startup, synchronization, reliability run, and performance testing milestones. Timely completion of System Completion (ECC/TOP) and Owner handover activities. Effective oversight of EPC Contractor commissioning performance. Timely identification and mitigation of commissioning risks. High-quality commissioning documentation and turnover packages. Positive collaboration with internal stakeholders, EPC Contractor, OEMs, and Owner’s Engineer.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The opportunity We are seeking a motivated and enthusiastic GIS I&amp;C Supervisor to join our team. In this role, you will be working as a GIS I&amp;C Supervisor to cover all the activities/actions required to enable switching systems to be successfully installed, repaired and any faults eliminated. You will be responsible for installation of high voltage systems worldwide for PGHV. He/she represents PG in general through his presence and technical knowledge and PGHV specifically in dealings with the client at the installation site. The deadlines issued for each project are adhered to, whereby the cost-performance ratio must always be borne in mind in this respect. He/she embodies the PG QA philosophy, considering the special conditions on the construction sites. You will be responsible for the installation &amp; commissioning work entrusted to him being carried out in perfect technical order.</p><p>How you ll make an impact</p><ul><li>Carrying out installation and maintenance work independently.</li><li>Ensuring compliance with the installation requirements and Instructions &amp;ensures that the necessary accident prevention measures are observed; specifically, he abides by the guidelines for work on live system components.</li><li>Responsible for red-mark drawings/documents with any changes or modification that became necessary during the installation.</li><li>Advising the sub-supplier's installation superintendent in planning and coordination of the work force necessary to comply with the schedule.</li><li>Cooperating with PG Project Manager on establishing status of completed and non-completed work.</li><li>Inspecting of arriving material for completeness and possible damage and coordination of material handling in cooperation with sub-suppliers Material Control within sub-suppliers' procedures.</li><li>Issuing non-conformance reports for damage or missing equipment within PG scope of supply in cooperation with PG Project Manager.</li><li>Supervising final installation &amp; commissioning tests and PG installation completion documentation.</li><li>Supervising and coordinating the loop check activities and participation at site meetings as requested by the PG-CH Project Manager.</li><li>Responsible for the competence execution of his tasks.</li><li>Carry out any tasks that are assigned by management necessary to fulfil the job requirements.</li><li>Responsible for ensuring compliance with applicable external and internal regulations, procedures, and guidelines.</li><li>Living Hitachi Energy s core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>A bachelor s degree or diploma in Electrical Engineering is required. Minimum 2-5 years of experience with GIS is preferred. Previous experience with SF6 GAS-Handling and PGHV Transmission &amp; Sub transmission GIS Product knowledge preferred. Having capability to use MS project professionally. Proficiency in both spoken &amp; written English language is required.</p><p></p></section>

<h3 >About the A/C Technician Role</h3> <p >Dana Rayhaan by Rotana in Dammam is seeking a dedicated <strong >A/C Technician</strong> to join its full-time maintenance team. This position is open to professionals with <strong >0-1 years of experience</strong> who are committed to maintaining optimal temperature and air quality control systems within the hotel premises.</p> <h3 >Role Purpose and Contribution</h3> <p >The A/C Technician is primarily responsible for the installation, servicing, and repair of all temperature and air quality control systems. This role is integral to ensuring the comfort and satisfaction of guests by maintaining the efficient operation of critical hotel infrastructure and providing effective solutions to maintenance requirements.</p> <h3 >Key Responsibilities</h3> <ul > <li >Repair, maintain, and provide technical attention to all electrical and mechanical refrigeration systems, including freezers, fridges, ice makers, fan coil units, and chillers.</li> <li >Perform preventive maintenance on all air-conditioning and refrigeration systems throughout the hotel.</li> <li >Address maintenance requests from all departments in a timely manner.</li> <li >Ensure routine cleaning of fan coil units and air-handling unit filters.</li> <li >Cooperate with engineering colleagues in detecting failures of air-condition and refrigeration systems and during function setup.</li> <li >Liaise with and inform the Engineering Storekeeper regarding the purchase of necessary parts and equipment.</li> </ul> <h3 >Technical Operations and System Management</h3> <ul > <li >Check the performance of refrigeration systems and their components regularly.</li> <li >Verify the functionality of all door closing systems on walk-in coolers/freezers, including door gaskets and latches.</li> <li >Inspect and maintain all defrosting systems and the automation of ice makers.</li> <li >Monitor the performance of air-conditioning and chill water systems.</li> <li >Implement strict control measures on the venting of CFCs to the atmosphere.</li> <li >Conduct overhauling of air-condition and refrigeration equipment and systems as required.</li> <li >Check all refrigeration and oil levels and oversee major repairs.</li> </ul> <h3 >Qualifications and Experience</h3> <p >Candidates for this role should possess <strong >0-1 years of experience</strong> in a maintenance capacity, with a focus on air conditioning and refrigeration systems. A foundational understanding of electrical and mechanical refrigeration principles is essential.</p> <h3 >Work Standards and Compliance</h3> <p >The A/C Technician is expected to perform all duties in full compliance with the country's technical regulations and established safety standards. This role requires a proactive approach to maintenance and a commitment to upholding operational excellence within the hotel's engineering department.</p>

<p>The Executive Assistant Manager i/c of Food &amp; Beverage is responsible to ensure the smooth and efficient running of all operational aspects of the Food &amp; Beverage and to ensure that the various departments are run according to the standards set for the brand in general and the hotel specifically</p><p>1-Participate in development and preparation of hotels strategic plan.</p><p>2-Prepare budget and monitor revenues.</p><p>3-Profit and Loss responsibility.</p><p>4-Coordinate with Revenue Management and Sales to maximize F&amp;B occupancy, rates, average check and profits.</p><p>5-Optimize revenue by sales-promoting activities and controlling the Revenue Management. in order to achieve the best possible Revenue Penetration Market Share in the market.</p><p>6-Control the duty roster for sub departments guaranteeing the quality as well as considering the highest personnel cost efficiency.</p><p>7-Oversee all labor cost controls within budget limits and occupancy variances to maximize productivity.</p><p>8- Conduct interviews with possible future employees.</p><p>9-Responsible for control of all operational tasks as well as the respective delegation and control.</p><p>10-Re-evaluate work flows to improve and optimize organization.</p><p>11- Implement and evaluate procedures and policies.</p><p>12- Ensure clear communications with all other department heads.</p><p>13-Create Career Development plans for each employee which is part of the Talent Pool or High Potentials.</p><p>14-Regularly organize departmental meetings.</p><p>15-Communicate the strategy and targets of the management to their departmental heads and the line staff and ensuring implementation.</p><p>16-Ensure and communicate up-to-date procedures for all safety relevant measures with Fire &amp; Safety team.</p><p>17-Conduct daily walk through to ensure quality standards and cleanliness in front and back of the house areas.</p><p>18-Control the technical situation of the departments in rooms divisions.</p><p>19- Maintain a high visibility with guests and employees.</p><p>20- Responsible for maintaining 85% scoring for LQA inspections.</p><p>21-Manager on Duty weekdays and weekends.</p><p>22-GM responsibility in his/her absence.</p><p><strong>Desired Candidate Profile</strong></p><p>At least two years of experience as Director of F&amp;B. International experience across both the Gulf region and Europe is essential. Sound training in various departments in international luxury hotels. English - excellent oral and written skills Additional language - beneficial.</p>

<p>Works under the direction of operation and maintenance manager to plan &amp; supervise all preventive and corrective maintenance, monthly /annual outage and overhauling work activities on plant I &amp; C equipment.</p><p><strong>Roles &amp; Responsibilities</strong></p><ul><li>Assigns preventive and corrective maintenance jobs as per the direction of Section Head. Supervises and co-ordinates activities of maintenance staff. Maintains records, prepares reports and composes correspondence related to work.</li><li>Executes work order through CMMS (SAP) and co-ordinates with planning engineer for job completion and technical matters.</li><li>Maintain such communications and relations as are necessary to report on the status of matters requiring action and to ensure that corrective action is undertaken.</li><li>Helps Maintenance Manager in executing corrective and planned maintenance with due regard to annual scheduled maintenance plan.</li><li>To perform technical evaluation of quotations received from purchase department and recommend appropriate choice.</li><li>To prepare purchase requisitions for spare parts and consumables ensuring budgetary constraints and arrange strategic spares availability to cope up with the maintenance requirements.</li><li>Review and recommend new maintenance procedures and work instructions.</li><li>Supervise, direct and co-ordinate the activities of all personnel assigned to his area.</li><li>To carry out any other duty assigned to him by the management from time to time.</li><li>Ensure Environmental Aspect-Impact and Hazard Risk Assessment are carried out, controlled and updated</li><li>Implement, monitor and report IMS objectives, Targets and programs</li><li>Provide necessary resources for effective implementation and sustenance of IMS</li><li>Report IMS performance to the management periodically</li><li>Ensure Legal compliance with respect to their scope of activities</li><li>Ensure identification of root cause for the identified non conformances/ deviations and to implement corrective actions/Preventive actions</li><li>Identify the competency gap for their subordinate personnel and implement necessary actions.</li><li>Carry out annual performance evaluation of reporting employees</li><li>Responsible to ensure the compliance to legal requirements, contractual and organizational requirements</li><li>Provide on-the-job training to new employees and evaluate their OJT Performance</li><li>Identification, documentation and control of hazards in assigned work area</li><li>Ensure aspects identified are monitored and operational controls are followed</li><li>Report deviations in Integrated Management System, identify root cause and implement corrective and preventive actions</li><li>Reporting of emergencies and incidents and near misses</li><li>Effective resource utilization</li><li>Perform other duties as assigned</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Job Specifications</strong></p><p>Educational Desired: Bachelor s engineering degree (B.E) in I &amp; C for four-year College or university.</p><p>Preferred Minimum Experience (Type and duration): Minimum Minimum 3 -5 years related experience and training or equivalent combination of education and experience.</p><p>Preferable: Have worked in operation and maintenance field ( power, RO etc Plant) as an I&amp;C engineer.</p><p>Required Skills:</p><ul><li>Awareness of Quality, Occupational Health &amp; Safety and Environment Management system principles</li><li>Knowledge of applicable legal requirements</li><li>Hazard Risk assessment</li><li>Aspect Impact assessment</li><li>Investigating skills</li><li>Knowledge of spillage containment</li><li>Knowledge of managing HSE emergencies</li><li>Knowledge of identification, classification and disposal of waste</li><li>Knowledge of Emission Monitoring</li><li>Be able to lead the maintenance group.</li><li>Excellent communication skills in English Language</li><li>Computer literate. Able to use MS Outlook for correspondence.</li><li>Be able to use SAP as end user.</li><li>Have a mid-experience in DCS and PLC</li><li>Have experience in working on quality analyzers</li><li>Aware about firefighting system</li><li>Aware about CCTV and security system</li></ul><p>Desired certification / Job specific skill / Training</p><p>Work Condition: While performing the duties of this position, the employee occasionally works near moving mechanical parts and in outside weather conditions. In high precarious places he may be occasionally exposed to fumes or airborne particles, toxic or chemicals risk and electrical shock. The noise level in the work environment is usually moderate but very loud conditions do exist.</p>

Key Responsibilities:<br>I&C Installation Inspection Inspect installation of field instruments, transmitters, switches, gauges, control valves, analyzers and related equipment. Inspect instrument tubing, impulse lines, manifolds and fittings. Inspect cable trays, conduits, junction boxes and instrument marshalling cabinets. Verify installation, tagging, orientation, accessibility and identification of instruments. Inspect instrument and control cables, including routing, termination, glanding and earthing. Inspect installation of PLC/DCS/ESD panels, cabinets and associated equipment. Verify installation against approved IFC drawings, P&IDs, instrument index and cable schedules.<br>Quality Control & ITPPerform inspections in accordance with approved ITPs, checklists and method statements. Conduct Hold Point, Witness Point and surveillance inspections as required. Verify that construction activities comply with approved project specifications and procedures. Review inspection requests (IRs) and verify readiness before inspection. Raise and follow up NCRs, observations and punch items where required. Verify corrective actions and close-out of quality findings.<br>Testing & Calibration Witness and verify calibration of pressure, temperature, flow and level instruments. Inspect continuity, insulation resistance and loop testing. Witness instrument loop checks from field devices to DCS/PLC/ESD systems. Verify functional testing of control valves, actuators and associated accessories. Witness testing of alarms, interlocks, trips and shutdown systems where applicable. Verify calibration certificates and test records.<br>Documentation:Review inspection and test records for completeness and compliance. Maintain inspection reports, calibration records, test certificates and checklists. Verify As-Built drawings and red-line markups. Maintain I&C quality dossiers and turnover documentation. Support preparation of Mechanical Completion and Commissioning dossiers. Ensure traceability of instruments and equipment through tagging and documentation.<br>CCGT-Specific Responsibilities The Inspector may be required to cover I&C installations associated with:Gas Turbine and Generator systems HRSG systems Steam Turbine and Generator DCS / PLC / ESD systems Gas and steam systems Water Treatment and Demineralization Cooling Water systems Condensate and Feedwater systems Fuel Gas systems Electrical protection/control interfaces Plant auxiliary systems Fire & Gas systems CEMS / environmental monitoring systems Balance of Plant (BOP) instrumentation.<br>Standards & Requirements Ensure compliance with applicable:Project specifications and Employer/Owner requirements Approved IFC drawings and P&IDsInstrument Datasheets and Instrument Index ITPs and Method Statements IEC standards ISA standards API standards where applicable NFPA requirements where applicable NEC/local electrical requirements where applicable Manufacturer/vendor requirements EPC Contractor QA/QC procedures<br>Coordination:Coordinate daily with I&C construction engineers, supervisors and subcontractors. Interface with EPC QA/QC Engineers and Owner/PMC inspectors. Coordinate with commissioning and pre-commissioning teams. Participate in quality meetings and inspection coordination meetings. Support resolution of technical and quality issues at site. Ensure timely inspection and release of completed works.<br>Minimum Qualifications Diploma or Bachelor's degree in Instrumentation, Control Engineering, Electronics, 2. Electrical Engineering, or related discipline. Typically 5–8 years of relevant QA/QC experience, preferably in power generation or CCGT projects. Experience in large-scale power plant construction is highly desirable. Strong knowledge of instrumentation installation, calibration, loop checking and control systems. Experience working with EPC contractors and Owner/PMC inspection teams.<br>Required Competencies Strong knowledge of I&C construction and inspection activities. Ability to read and interpret P&IDs, Instrument Datasheets, Loop Diagrams, Wiring Diagrams, Cable Schedules and Hook-up Drawings. Knowledge of DCS, PLC and ESD systems. Knowledge of instrument calibration and testing. Strong NCR and punch-list management skills. Good understanding of QA/QC documentation and turnover requirements. Strong communication and coordination skills. Ability to work effectively in a fast-paced construction environment. Good knowledge of MS Office and relevant QA/QC systems.

<ul><li>Lead and supervise a team of A/C technicians, ensuring efficient execution of installation, maintenance, and repair projects.</li><li>Interpret blueprints, schematics, and technical drawings to guide team in complex HVAC system installations and troubleshooting.</li><li>Perform hands-on diagnostic and repair work on a variety of air conditioning systems, from residential to commercial units.</li><li>Develop and implement preventative maintenance schedules to minimize equipment downtime and optimize system performance.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>High School Diploma or equivalent; vocational training in HVAC is highly preferred.</p></li><li><p>EPA Universal Certification for refrigerant handling is mandatory.</p></li><li><p>Minimum of 8 years of progressive experience in HVAC installation and repair.</p></li><li><p>Proven track record of successfully leading and motivating a technical team.</p></li></ul>

Job Purpose:<br>The I&C Site Commissioning Engineer will be responsible for overseeing the on-site implementation and performance of control systems, ensuring that installation and functionality aligns with the engineering design. The core of the role involves leading the Commissioning phase, performing loop checks, and troubleshooting communication networks and automation software to ensure a seamless handover to operations.<br>Key Responsibilities<br>On-Site Design Validation: Review and interpret engineering documentation (P&IDs, Loop Drawings, Wiring Diagrams). Verify that physical installation aligns with the design and manage field modifications (Redlines). Commissioning management: Lead the I&C commissioning phase, from cold loop checks to hot commissioning and system handover. Coordinate with the engineering office to ensure functional logic matches process requirements. Signal & Loop Diagnostics: Perform end-to-end verification of control loops. Identify and resolve issues related to signal integrity, electrical noise, or incorrect wiring. Motorized Actuator Setup: Execute the commissioning of motorized valves and actuators (e.g., Rotork, Bernard, Auma). Responsible for setting mechanical end-limits, configuring torque switches, and verifying both hardwired and bus-based feedback to the PLC. System Integration: Download PLC/HMI projects provided by the engineering office, configure hardware parameters, and establish communication between different platform nodes. Fault Detection & Troubleshooting: Act as the primary point of contact for technical discrepancies on-site, providing local solutions or technical reports to the home office.<br>Technical Requirements <br>Instrumentation & Field Sensors:<br>Expertise in 4-20m A analog signals and discrete I/O diagnostics. Advanced use of HART protocol for instrument configuration, calibration, and range adjustment (using Emerson 475/AMS or similar). Proficiency with diagnostic tools: Multimeters, signal calibrators, and loop simulators. Motorized Actuators: Practical knowledge in commissioning motorized valves (setting limits, torque, and feedback) and their integration with the PLC. Industrial Communications and Electrical Panels interface:Solid understanding and hands-on experience with Modbus TCP and Modbus RTU. Ability to troubleshoot physical layers (RS-485, Ethernet) and use PC-based software (e.g., Modbus Poll) to simulate or sniff traffic. Electrical Cabinets & Interlocks: Ability to interpret electrical schematics to verify hardwired interlocks, relay logic, and cabinet-to-field wiring integrity. Control Platforms (Diagnostics Level):Siemens: Proficiency in TIA Portal: Must be able to go online, check hardware diagnostics, force I/O, and monitor logic. Ability to perform hardware configuration, firmware updates, and program downloads. Rockwell Automation: Proficiency in Studio 5000: Must be able to go online, check hardware diagnostics, force I/O, and monitor logic. Capable of managing firmware, communication paths (RSLinx), and code monitoring. HMI/SCADA: Ability to configure IP addresses, communication drivers, and verify data mapping on HMI screens (Win CC, Factory Talk View).

<h3><strong>About El Seif Engineering Contracting Company</strong></h3><p>El Seif Engineering Contracting Company, with over half a century of diverse experience across public infrastructure, military, and defense applications, operates on core values of <strong>excellence, integrity, and innovation</strong>. We are committed to upholding the highest standards in meticulous planning and expert construction, ensuring projects are delivered with precision and attention to detail. Our forward-thinking approach positions us as a trusted partner in the construction industry, continuously pushing boundaries to create sustainable and impactful solutions.</p><h3><strong>The Role: Project Manager (C&amp;A)</strong></h3><p>We are seeking an experienced Project Manager (C&amp;A) to join our full-time team. This role is central to managing large-scale fit-out and construction projects from the planning phase through to completion. The successful candidate will assume overall responsibility for project execution, encompassing planning, resource allocation, cost control, scheduling, quality assurance, safety protocols, commercial performance, stakeholder coordination, and ensuring client satisfaction.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Manage the end-to-end execution of large-scale fit-out and construction projects within approved budget, schedule, quality, and safety requirements.</li><li>Lead project teams and manage manpower, equipment, materials, and resources to achieve project milestones and productivity targets.</li><li>Oversee project planning, progress monitoring, cost control, Bills of Quantities (BOQs), variations, and commercial requirements.</li><li>Coordinate with clients, consultants, contractors, subcontractors, and multidisciplinary teams to resolve technical and site issues.</li><li>Manage approvals for designs, shop drawings, material submittals, and technical documents.</li><li>Monitor labor productivity, resource availability, project costs, and overall performance, taking corrective action where required.</li><li>Ensure compliance with company policies, Health, Safety, and Environment (HSE) requirements, quality standards, the Code of Ethics, and ERP/project management systems.</li><li>Support the development and retention of project teams and contribute to Saudization, succession planning, and employee development initiatives.</li><li>Report project operational, financial, and progress status to the Project Director and support the implementation of the Project Execution Plan (PEP).</li><li>Drive timely project completion and achieve high levels of client satisfaction.</li></ul><h3><strong>Qualifications and Experience</strong></h3><ul><li>A minimum of <strong>12-15 years of proven experience</strong> managing large-scale fit-out and construction projects.</li></ul><h3><strong>Compensation and Benefits</strong></h3><p>This full-time position offers a competitive compensation package, including standard benefits, a performance bonus, and opportunities for merit increases.</p><h3><strong>Application Process</strong></h3><p>Candidates who meet the above qualifications and are prepared to contribute to our commitment to excellence are encouraged to apply.</p>

<ul><li>Diagnose and troubleshoot complex HVAC system malfunctions, utilizing advanced diagnostic tools and techniques to pinpoint issues efficiently.</li><li>Perform comprehensive repairs and replacements of A/C components, including compressors, condensers, evaporators, and refrigerant lines, ensuring optimal system performance.</li><li>Conduct preventative maintenance on a wide range of HVAC equipment, adhering to strict manufacturer guidelines and safety protocols to prolong equipment lifespan.</li><li>Lead and mentor junior technicians, providing technical guidance, training, and support to foster their professional growth and development.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Possesses a High School Diploma or equivalent, with vocational training in HVAC/R preferred.</p></li><li><p>Holds relevant certifications, such as EPA Section 608, and other industry-recognized credentials.</p></li><li><p>Demonstrates a minimum of 10 years of hands-on experience in the HVAC/R field, with a focus on commercial and residential systems.</p></li><li><p>Demonstrates a strong understanding of HVAC system design, installation, and maintenance principles.</p></li></ul>

<h3 >About Rize and the Tele Sales Specialist Role</h3> <p >Rize is a rent-now-pay-later platform operating in Saudi Arabia, dedicated to enhancing the accessibility and affordability of rental services. The platform empowers tenants with financial flexibility and assists landlords in securing their income efficiently. As a <strong >Tele Sales Specialist (B C)</strong>, you will contribute to Rize's mission of revolutionizing the rental industry from our Riyadh office. This full-time position is suitable for candidates with <strong >0-1 years of experience</strong>.</p> <h3 >Our Company Culture and Principles</h3> <p >Rize operates with a commitment to innovation, aiming to uplift the real estate sector through technology. Our core principles include <strong >Customer Centricity</strong>, ensuring every decision prioritizes the customer, and <strong >Adaptability</strong> to changing market conditions. We foster an environment of <strong >Empowerment &amp; Collaboration</strong>, valuing diverse ideas and granting autonomy, while upholding the highest <strong >Ethical Excellence</strong> in all operations.</p> <h3 >Key Responsibilities</h3> <ul > <li >Conduct outbound calls to prospective and existing customers to promote products and services.</li> <li >Generate and qualify leads to achieve or exceed sales targets.</li> <li >Assess customer needs and recommend appropriate products or services.</li> <li >Deliver clear and informative sales pitches to engage customer interest.</li> <li >Address customer inquiries, provide information, and resolve issues professionally.</li> <li >Maintain accurate records of calls, customer data, and sales outcomes within CRM systems.</li> <li >Collaborate with the sales team to contribute to overall company objectives.</li> <li >Follow up on potential leads and cultivate relationships for future business.</li> <li >Stay informed on product knowledge and industry trends to effectively meet customer requirements.</li> <li >Manage the complete sales cycle, from initial contact to the creation, finalization, and successful signing of contracts.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of <strong >0-1 years of experience</strong> in a sales or customer-facing role.</li> <li >Demonstrated ability to communicate effectively and professionally.</li> <li >Proficiency in managing customer interactions and maintaining records.</li> <li >Capability to work collaboratively within a team environment.</li> </ul> <h3 >What We Offer</h3> <ul > <li >Competitive salary.</li> <li >Opportunity to work within a diverse international team.</li> <li >Exposure to an innovative work environment.</li> <li >Direct impact on company growth and market change.</li> <li >Fast-paced learning opportunities.</li> <li >Creative freedom in approach.</li> <li >Participation in a close-knit community.</li> </ul> <h3 >Work Environment and Location</h3> <p >You will join a diverse international team working from our office in <strong >Riyadh, Saudi Arabia</strong>. Rize fosters a collaborative and creative atmosphere, encouraging new ideas and problem-solving to drive positive market impact.</p>

<p>The Instrumentation &amp; Control (I&amp;C) Engineer is responsible for the design, installation, commissioning, operation, maintenance, and optimization of instrumentation, control, automation, and SCADA systems. The role ensures the reliability, safety, and efficiency of plant operations while maintaining compliance with company standards, industry regulations, and HSE requirements.</p><p><strong>Key Responsibilities</strong></p><p><strong>Engineering &amp; Technical</strong></p><ul><li>Design, review, and optimize instrumentation and control systems for plant facilities and industrial processes.</li><li>Develop and review instrumentation specifications, control philosophies, P&amp;IDs, instrument data sheets, loop diagrams, hook-up drawings, and cable schedules.</li><li>Select, specify, and evaluate field instrumentation, including pressure, temperature, flow, level, analytical instruments, and control valves.</li><li>Review vendor documentation and ensure compliance with project specifications and applicable standards.</li><li>Support engineering studies, technical evaluations, and system modifications to improve plant performance and reliability.</li></ul><p><strong>Installation &amp; Commissioning</strong></p><ul><li>Supervise the installation, testing, calibration, and commissioning of instrumentation and control systems.</li><li>Perform loop checking, functional testing, cause-and-effect verification, and control system validation.</li><li>Coordinate with contractors, vendors, and multidisciplinary engineering teams during project execution.</li><li>Ensure all commissioning activities are completed safely and in accordance with approved procedures.</li></ul><p><strong>Operations &amp; Maintenance</strong></p><ul><li>Monitor the performance and reliability of instrumentation, PLC, DCS, SCADA, and automation systems.</li><li>Troubleshoot and resolve instrumentation and control system failures to minimize downtime.</li><li>Develop preventive, predictive, and corrective maintenance strategies for instrumentation assets.</li><li>Coordinate instrument calibration programs and maintain calibration records.</li><li>Support plant shutdowns, turnarounds, and major maintenance activities.</li></ul><p><strong>Automation &amp; Control Systems</strong></p><ul><li>Configure, maintain, and troubleshoot PLC, DCS, SCADA, HMI, and industrial communication networks.</li><li>Support control system upgrades, cybersecurity initiatives, and digital transformation projects.</li><li>Optimize process control strategies to improve operational efficiency, reliability, and energy performance.</li></ul><p><strong>Quality, HSE &amp; Compliance</strong></p><ul><li>Ensure compliance with company policies, HSE requirements, and applicable international standards (IEC, ISA, ISO, NFPA, etc.).</li><li>Participate in HAZOP, SIL assessments, FAT, SAT, risk assessments, and technical audits.</li><li>Ensure all engineering documentation is accurate, current, and properly controlled.</li><li>Promote a strong safety culture and ensure all work is performed in accordance with approved safe work practices.</li></ul><p><strong>Documentation &amp; Reporting</strong></p><ul><li>Prepare technical reports, maintenance records, engineering calculations, and commissioning documentation.</li><li>Maintain instrument registers, asset databases, and engineering documentation.</li><li>Provide technical recommendations for equipment upgrades, replacements, and lifecycle management.</li><li>Support budget planning, spare parts management, and continuous improvement initiatives.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Instrumentation Engineering, Electrical Engineering, Electronics Engineering, Control Systems Engineering, or a related discipline.</li><li>3 - 7 years of experience in instrumentation and control engineering within power generation, renewable energy, water desalination, oil &amp; gas, industrial plants, or large infrastructure projects.</li><li>Experience in commissioning, maintenance, or project execution is preferred.</li><li>Strong knowledge of PLC, DCS, SCADA, HMI, and industrial automation systems.</li><li>Familiarity with major control platforms such as Siemens, ABB, Schneider Electric, Honeywell, Yokogawa, Emerson, or Rockwell Automation.</li><li>Knowledge of industrial communication protocols (Modbus, Profibus, Profinet, Ethernet/IP, OPC, Foundation Fieldbus, HART).</li><li>Experience with instrument calibration, control valves, transmitters, analyzers, and field devices.</li><li>Ability to interpret P&amp;IDs, loop drawings, wiring diagrams, and electrical schematics.</li><li>Proficiency in Microsoft Office and CMMS/ERP systems (SAP, Maximo, or equivalent).</li><li>Strong analytical and troubleshooting skills.</li><li>Excellent problem-solving and decision-making abilities.</li><li>Effective planning, organization, and time management.</li><li>Strong communication and interpersonal skills.</li><li>Ability to work independently and collaboratively in multidisciplinary teams.</li><li>High attention to detail and commitment to quality.</li><li>Adaptability and continuous improvement mindset.</li><li>Strong commitment to health, safety, and environmental compliance.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> &nbsp;The Executive Assistant Manager i/c of Food &amp; Beverage is responsible to ensure the smooth and efficient running of all operational aspects of the Food &amp; Beverage and to ensure that the various departments are run according to the standards set for the brand in general and the hotel specifically&nbsp;<br><br>&nbsp;1-Participate in development and preparation of hotels strategic plan.<br>2-Prepare budget and monitor revenues.<br>3-Profit and Loss responsibility.<br>4-Coordinate with Revenue Management and Sales to maximize F&amp;B occupancy, rates, average check and profits.<br>5-Optimize revenue by sales-promoting activities and controlling the Revenue Management. in order to achieve the best possible Revenue Penetration Market Share in the market.<br>6-Control the duty roster for sub departments guaranteeing the quality as well as considering the highest personnel cost efficiency.<br>7-Oversee all labor cost controls within budget limits and occupancy variances to maximize productivity.<br>8- Conduct interviews with possible future employees.<br>9-Responsible for control of all operational tasks as well as the respective delegation and control.<br>10-Re-evaluate work flows to improve and optimize organization.<br>11- Implement and evaluate procedures and policies.<br>12- Ensure clear communications with all other department heads.<br>13-Create Career Development plans for each employee which is part of the Talent Pool or High Potentials.<br>14-Regularly organize departmental meetings.<br>15-Communicate the strategy and targets of the management to their departmental heads and the line staff and ensuring implementation.<br>16-Ensure and communicate up-to-date procedures for all safety relevant measures with Fire &amp; Safety team.<br>17-Conduct daily walk through to ensure quality standards and cleanliness in front and back of the house areas.<br>18-Control the technical situation of the departments in rooms divisions.<br>19- Maintain a high visibility with guests and employees.<br>20- Responsible for maintaining 85% scoring for LQA inspections.<br>21-Manager on Duty weekdays and weekends.<br>22-GM responsibility in his/her absence.<br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 1+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking for passionate and dynamic Maintenance professionals who pride themselves on their ability to deliver extraordinary levels of customer service and provide creative solutions to our guests.<br><br>As an A/C Technician you are responsible to install, service and repair temperature and air quality control systems and your role will include key responsibilities such as:<br><br>• Repair, maintain and provide technical attention to all electrical and mechanical refrigeration systems of the hotel - freezer, fridges, ice makers, fan coil units, chiller, etc.<br>• Maintain preventively all air-conditioning and refrigeration systems within the hotel<br>• Check on performance of refrigeration systems and components<br>• Verify all door closing systems on walk in coolers / freezer (door gaskets / latches)<br>• Check and maintain all defrosting systems and automation of ice makers<br>• Work on maintenance requests from all departments<br>• Ensure routine cleaning of fan coil units and air-handling unit filters<br>• Check on performance of air-conditioning and chill water systems<br>• Cooperate with all engineering colleagues in detention of failures of air-condition and refrigeration system and function set up<br>• Strict control on venting of CFC’s to atmosphere<br>• Overhauling of air-condition / refrigeration equipment and systems<br>• Check all refrigeration and oil levels and control of major repairs<br>• Cooperate and inform Engineering Storekeeper on purchase of parts<br>• Carry out all works as per the country technical regulations and safety standards</p> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

With over 130 years of experience managing the complete water cycle, Aguas de Valencia International is a global leader ???? with operations across Africa, the Middle East, and Latin America. We are seeking committed professionals who are eager to contribute to sustainable development and take on global challenges in water management.<br>If you value teamwork, innovation, and want to make a positive impact in communities around the world, this is your opportunity to grow professionally in a company with purpose.<br>At Aguas de Valencia International, reliable instrumentation, automation, and control systems are essential to ensuring safe, efficient, and continuous plant operations. We are looking for an experienced Instrumentation & Control Engineer to support the operation, maintenance, and continuous improvement of our SCADA, PLC, HMI, and instrumentation systems at our wastewater treatment plant in Taif.<br>Key Responsibilities Manage, maintain, and troubleshoot the plant's SCADA, PLC, HMI, instrumentation, and Data Historian systems. Develop, modify, and upgrade PLC logic and HMI applications for existing plant control systems. Manage and maintain SCADA systems, touch screens, PCs, and related control equipment. Review plant operations and verify the correct transmission of signals and data from instrumentation sensors. Perform preventive and corrective maintenance of SCADA, PLC, HMI, and instrumentation systems. Maintain control system documentation, configurations, and system backups. Troubleshoot PLC/HMI programming and control system issues. Prepare the annual critical spare parts requirements for instrumentation and control systems. Support continuous improvement, digital development, and optimization of plant control systems. Participate in monthly Instrumentation & Control (I&C) client meetings. Supervise assigned activities and coordinate with operators, colleagues, clients, and subcontractors. Ensure all work is performed in accordance with QHSE requirements and company procedures.<br><br>Requirements Bachelor’s Degree in Electronics, Instrumentation, Industrial Engineering, or a related field, preferably with specialization in the integration of industrial systems. Minimum 5 years of experience in the maintenance of wastewater treatment plants and pumping stations. Strong hands-on experience with SCADA, PLC, HMI, instrumentation, and industrial control systems. Demonstrated ability to manage SCADA and Controls projects within required timelines and budgets. Strong troubleshooting, analytical, and problem-solving skills. Effective written and verbal communication skills with the ability to prepare technical reports and documentation. Strong planning, conceptual analysis, and organizational skills. Project management and supervision capabilities. Ability to work independently, take initiative, and deliver results effectively.<br>Additional Considerations Immediate availability Saudi National Previous experience in international companies is preferred.<br>Ready to shape the future of water? Let your career flow with us – dive into a meaningful journey and be part of transforming lives through water. ????