Ship Mechanic Jobs

<p>Job Purpose</p><p>Supervising the operation and maintenance of pumping stations and transmission lines, and ensuring the efficiency and safety of operational processes in accordance with approved standards, while coordinating between the concerned parties to ensure the continuity and quality control of water supplies.</p><p><br></p><p>Key Roles and Responsibilities</p><p>Ensuring that work is carried out in accordance with approved policies, processes, procedures and instructions.</p><p>Identifying opportunities for continuous improvement of systems and practices, cost optimization, productivity improvement, and efficiency.</p><p>Ensuring compliance with all applicable laws, rules, regulations and standards within the water transport company and related roles such as (human capital, safety, industrial security, risks, cybersecurity, etc.).</p><p>Escalating problems to ensure challenges and issues are resolved efficiently and in a timely manner.</p><p>Working on operational monitoring of the performance of pumping stations and pipelines and ensuring their compliance with standard operating procedures, while taking the necessary measures to correct any deficiencies or malfunctions.</p><p>Preparing daily, weekly, and monthly operational reports related to incidents, pumping efficiency, resource consumption, and equipment performance, and discussing them with relevant parties to ensure process improvement.</p><p>Conducting periodic checks on equipment and systems to ensure their operational efficiency and coordinating with maintenance teams to implement preventive and corrective maintenance plans on time.</p><p>Implementing operating and safety procedures related to the operation, isolation, and restarting of electrical and mechanical equipment and systems, while ensuring that all workers comply with occupational safety requirements.</p><p>Coordination of pumping and distribution operations through continuous communication with the Central Control Center ( CCR ) and Local Stations ( LCR ) to ensure efficient water flow according to operational plans and maintenance schedules.</p><p>Issuing work permits and supervising the implementation of maintenance work by internal teams and contractors, while ensuring compliance with work procedures and safety and quality requirements.</p><p>Analyzing operational performance by monitoring consumption, comparing forecasts with actual production, and providing suggestions to improve operational efficiency and reduce downtime.</p><p>Key Roles and Responsibilities 2</p><p>Performing insulation and return work for mechanical and electrical equipment of (medium - low) voltage, following the required safety procedures .</p><p>Monitoring water quality in coordination with laboratory teams, ensuring that transport systems comply with quality standards, and taking necessary actions when any defect is discovered that may affect water quality.</p><p>Participating in the planning and development of operating systems by proposing improvements to system designs, developing standard operating procedures, and ensuring that processes comply with the latest technical standards and recommendations.</p><p>Work coverage at all pumping stations whenever the need arises.</p><p>Understanding the functions of the pumping station operating systems of the transportation company and related manuals in line with the guidelines, policies and operating procedures .</p><p>The central control room is operated manually or electronically in accordance with the shift schedule, ensuring continuous monitoring and tracking of pumping load and tank level .</p><p>Inspect and monitor the central control room operations by reading station gauges, graphs, online analyzers, computer screens, meters, carrier systems in use and other devices for early detection of potential problems .</p><p>Key Roles and Responsibilities 3</p><p>Attempt to resolve any discovered problems and report any operational malfunctions or emergencies.</p><p>He monitors all equipment readings, records the readings on the designated sheets, and summarizes all work and problems that occurred during the shift and records them in the report book.</p><p>Implement the emergency plan as instructed, and report any delays or obstacles to the supervisor immediately, in order to avoid interruption of the water supply .</p><p>Coordination with the local control room to ensure that all central commands are taken into account and properly implemented, and also to implement all shutdown or switching activities between pumping units .</p><p>Supporting the completion of the shift schedule for preventive and corrective maintenance to ensure uninterrupted system operation.</p><p>Preparing the required report highlights the central control room shift operations, incidents and work stoppages, and thus updates the station's operational records in order to maintain a record of station performance.</p><p>Performing insulation and return work for mechanical and electrical equipment of (medium - low) voltage, following the required safety procedures.</p><p>Performing routine testing of fire suppression systems and reporting to the operations management.</p><p>Performing site visits to pumping stations and carrying out all equipment replacement and routine operation work.</p><p>Performing the duties of a tank site operator whenever required.</p><p>Tasks that can be assigned to him when needed:</p><p>Participating in the work of committees (internal and external).</p><p>Providing support and assistance to other transportation systems.</p><p><br></p><p>Education Requirements</p><p>Diploma in Mechanical Engineering or Relevant fields</p><p>Key Communications</p><p>internal stakeholders</p><p><br></p><p>All departments</p><p>External stakeholders</p><p><br></p><p>Consultants/Contractors</p><p>Maintenance service providers</p><p>Governmental bodies and agencies</p><div><br></div><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>We currently have an urgent requirement for the position of Procurement Officer for reputed Oil &amp; Gas Company for their Workshop Requirement in Saudi Arabia. Responsible for sourcing and purchasing plates, pipes, fittings, flanges, welding consumables, structural materials, equipment, tools, and project-specific items as per approved MTOs, specifications, and project requirements. Handles RFQs, supplier evaluation, technical and commercial comparisons, negotiations, purchase orders, delivery follow-up, and expediting to ensure materials are available as per project schedules. Coordinates closely with Engineering, QA/QC, Stores, Finance, and Project teams for material specifications, approvals, inspection requirements, documentation, and timely delivery. Must have good knowledge of material grades, ASME/API standards, MTC requirements, material traceability, vendor documentation, and procurement procedures, with strong negotiation and supplier management skills. Specialization : Manufacturing of pressure vessels, tanks, heat exchangers, Pipings.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Procurement Officer with 3-8 years of experience in industrial fabrication, Oil &amp; Gas, pressure vessels, heat exchangers, structural steel, and EPC projects, preferably supporting Saudi Aramco, SABIC, and major EPC clients.</li><li>Qualification: Diploma in Mechanical /BE Mechanical</li><li>Total Exp: 3-8 yrs</li></ul>

EMEC KSA is seeking an experienced Planning Manager to lead the planning, scheduling, and project-control functions for large- to mega-scale MEP projects.<br>Key Responsibilities Develop and manage detailed project schedules, baselines, recovery plans, and progress-monitoring systems. Monitor project performance, identify delays and risks, and recommend corrective actions. Coordinate with project, engineering, procurement, commercial, and construction teams. Prepare progress reports, dashboards, forecasts, and presentations for senior management and clients. Manage resource and cost loading, schedule updates, and critical-path analysis. Support extension-of-time claims and delay analysis. Ensure project milestones are achieved in accordance with contractual requirements.<br>Requirements Bachelor’s degree in Mechanical Engineering.10–15 years of planning and project-controls experience. Proven experience delivering large- to mega-scale MEP projects in KSA or the GCC. Valid Saudi Council of Engineers (SCE) certification is mandatory. Advanced knowledge of Primavera P6 and other planning/reporting tools. Strong understanding of MEP construction sequences, project controls, progress measurement, and delay analysis. Excellent leadership, coordination, analytical, and stakeholder-management skills. Candidates with strong experience in KSA-based projects will be preferred.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Senior Technical Director (Contracting) <ul> <li><span>Posting Date</span>: 12/09/2026</li> <li><span>Ref</span>: E9903</li> <li><span>Position</span>: Senior Technical Director (Contracting)</li> <li> </li><li><span>Location</span>: KSA</li> <li><span>City</span>: Riyadh / Jeddah</li> <li> </li><li><span>Sector</span>: Contracting and Construction</li> <li><span>Years of Experience</span> 15+ Years</li> <li> </li><li><span>Qualification</span>: Degree in Mechanical Engineering or a closely related engineering discipline</li> <li><span>Salary</span>: Up to 50,000 SAR</li> <li><span>Workdays</span>: 6 Working Days</li> <li> </li><li><span>Description</span>: ►Responsibilities<br> •Lead the design and technical delivery of multidisciplinary MEP systems, including HVAC, plumbing, firefighting, fire alarm, and electrical systems across residential, commercial, industrial, and healthcare projects.<br> •Direct design development, technical reviews, shop drawing preparation, coordination, and value engineering activities to ensure accuracy, constructability, quality, and timely project delivery.<br> •Ensure all MEP designs, specifications, equipment selections, and technical documentation comply with applicable local regulations and international standards, including ASHRAE, SMACNA, DIN, BS, EU, UPC, IPC, NFPA, and relevant energy codes.<br> •Review design drawings, technical specifications, equipment data sheets, material submittals, BOQs, and construction documentation prior to consultant or client submission and approval.<br> •Lead and supervise the technical and design teams, delegate responsibilities, monitor productivity and project progress, establish priorities, and maintain high technical and performance standards.<br> •Coordinate closely with project management, operations, procurement, and cost control teams on BOQs, technical requirements, variation orders, approvals, and construction deliverables.<br> •Manage consultant and client technical approvals, conduct site inspections, resolve interdisciplinary coordination issues, and ensure approved documentation is efficiently transferred to project execution teams.<br> ►Qualifications<br> •Bachelor’s degree in Mechanical Engineering or a closely related engineering discipline.<br> •Minimum 15 years of extensive experience in MEP design and engineering for residential, commercial, industrial, healthcare, and other complex facilities.<br> •Expert-level knowledge of HVAC, plumbing, firefighting, fire alarm, electrical, and integrated MEP system design for design-and-build projects.<br> •Strong working knowledge of applicable international engineering codes and standards, including ASHRAE, SMACNA, DIN, BS, EU, UPC, IPC, NFPA, and energy-efficiency requirements.<br> •Demonstrated expertise in technical leadership, multidisciplinary design coordination, value engineering, shop drawings, BOQ preparation, material approvals, and construction documentation.<br> •Proven ability to lead engineering teams, make complex technical decisions, manage competing priorities, coordinate across functions, and protect project and organizational interests.<br> •Fluent English communication skills across writing, reading, and conversation; Arabic language proficiency is an added advantage. <br> More<br> </li> </ul> <br> <br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

About Us<br>Since 1974, S. K. M Air Conditioning LLC has been a leading manufacturer of HVAC equipment across the Middle East and beyond. With 2,000+ employees representing 30+ nationalities, we deliver innovative, reliable, and energy-efficient solutions across 30+ global markets.<br>Role Overview<br>We are looking for a Sales Service Engineer – HVAC (After Sales) to join our After Sales team. This role is responsible for troubleshooting, warranty handling, and customer support, ensuring SKM systems consistently perform at the highest standards.<br>Key Responsibilities<br>???? Handle warranty and service complaints, ensuring resolution within set KPIs.???? Troubleshoot HVAC equipment (chillers, AHUs, DX systems, package units).???? Conduct root cause analysis of failures and prepare service reports.???? Support retrofit, repair, and maintenance activities.???? Supervise technicians on-site, ensuring safety and quality compliance.???? Provide technical feedback to engineering and quality teams.???? Assist in customer training and prepare technical documentation.<br>What We’re Looking For<br>✅ Bachelor’s degree in Mechanical Engineering (or 5–7 years HVAC service experience).✅ 5+ years’ experience in installation, operation, maintenance, and service of HVAC systems.✅ GCC experience preferred (HVAC service, MEP, or FM).✅ Strong troubleshooting, technical, and customer service skills.✅ Good communication skills in English (Arabic/Hindi/Urdu is an advantage).✅ Knowledge of mechanical/electrical controls (analog & microprocessor-based).<br>Why Join SKM?<br>???? Be part of one of the region’s leading HVAC manufacturers.???? Collaborative and multicultural work environment.???? Opportunities to grow your career and expand your technical expertise.???? Drive meaningful work in after sales service and customer satisfaction.<br>???? Apply Now to be part of SKM and make a difference in HVAC after sales excellence!

About the Company<br>We are hiring an HVAC Technician to support the operation and maintenance of HVAC systems within building facilities.<br>About the Role<br>This role is suitable for a technician with hands-on experience in Facilities Management, building maintenance, HVAC maintenance, MEP projects. The candidate must have practical experience in building facilities, not only installation or construction work.<br>Responsibilities<br><br>Conduct preventive and corrective maintenance for HVAC systems in building facilities. Inspect HVAC systems and equipment regularly and report findings. Troubleshoot and repair HVAC mechanical and electrical faults. Work on DX and chilled water systems, including split units, packaged units, ducted split systems, VRV/VRF, AHU, FCU, CAV/VAV, and related HVAC equipment. Replace or repair HVAC controls and electronic components when required. Install or repair refrigerant lines, chilled water lines, make-up lines, and drain lines. Respond quickly to maintenance calls and resolve issues within required time. Identify required spare parts and support spare parts requests. Support testing and commissioning activities when applicable. Maintain basic maintenance records, registers, and reports. Follow all site safety procedures, PPE requirements, LOTO, isolation, risk assessment, and work permit procedures. Support supervisors and engineers in planning and completing maintenance tasks. Ensure work is completed according to project SLA and quality standards.<br>Qualifications<br>Technical diploma or certificate in HVAC, Refrigeration, Air Conditioning, Mechanical, or related field. Experience in Facilities Management, building maintenance, HVAC maintenance. Must have experience in building facilities such as towers, malls, hospitals, hotels, compounds, universities, airports, commercial buildings, or large facilities. Good knowledge of refrigeration and air conditioning systems. Practical experience with DX and chilled water HVAC systems. Ability to use standard HVAC tools and instruments. Ability to troubleshoot common HVAC faults. Basic knowledge of electrical safety related to HVAC maintenance. Good communication skills and ability to follow supervisor instructions. Willingness to work full-time on-site in building facilities.<br>Preferred Skills<br>Previous FM or O&M project experience. Experience with AHU, FCU, VRV/VRF, split units, packaged units, chilled water systems, and ventilation systems. Knowledge of safety procedures including work permits, LOTO, isolation, PPE, and risk assessment. Ability to prepare simple maintenance reports. Basic computer skills.

About the Company<br>We are hiring an HVAC Technician to support the operation and maintenance of HVAC systems within building facilities.<br>About the Role<br>This role is suitable for a technician with hands-on experience in Facilities Management, building maintenance, HVAC maintenance, MEP projects. The candidate must have practical experience in building facilities, not only installation or construction work.<br>Responsibilities<br><br>Conduct preventive and corrective maintenance for HVAC systems in building facilities. Inspect HVAC systems and equipment regularly and report findings. Troubleshoot and repair HVAC mechanical and electrical faults. Work on DX and chilled water systems, including split units, packaged units, ducted split systems, VRV/VRF, AHU, FCU, CAV/VAV, and related HVAC equipment. Replace or repair HVAC controls and electronic components when required. Install or repair refrigerant lines, chilled water lines, make-up lines, and drain lines. Respond quickly to maintenance calls and resolve issues within required time. Identify required spare parts and support spare parts requests. Support testing and commissioning activities when applicable. Maintain basic maintenance records, registers, and reports. Follow all site safety procedures, PPE requirements, LOTO, isolation, risk assessment, and work permit procedures. Support supervisors and engineers in planning and completing maintenance tasks. Ensure work is completed according to project SLA and quality standards.<br>Qualifications<br>Technical diploma or certificate in HVAC, Refrigeration, Air Conditioning, Mechanical, or related field. Experience in Facilities Management, building maintenance, HVAC maintenance. Must have experience in building facilities such as towers, malls, hospitals, hotels, compounds, universities, airports, commercial buildings, or large facilities. Good knowledge of refrigeration and air conditioning systems. Practical experience with DX and chilled water HVAC systems. Ability to use standard HVAC tools and instruments. Ability to troubleshoot common HVAC faults. Basic knowledge of electrical safety related to HVAC maintenance. Good communication skills and ability to follow supervisor instructions. Willingness to work full-time on-site in building facilities.<br>Preferred Skills<br>Previous FM or O&M project experience. Experience with AHU, FCU, VRV/VRF, split units, packaged units, chilled water systems, and ventilation systems. Knowledge of safety procedures including work permits, LOTO, isolation, PPE, and risk assessment. Ability to prepare simple maintenance reports. Basic computer skills.

Job Description – Procurement Engineer Client: NSH Saudi Arabia Industry: Oil & Gas / EPC Projects Job Title: Procurement Engineer Location: Saudi Arabia Salary: SAR 5,000 – 7,000/month (Based on experience and interview performance) Job Summary NSH Saudi is seeking an experienced Procurement Engineer to support its Oil & Gas EPC projects. The ideal candidate will be responsible for the timely procurement of engineering materials, equipment, and services while ensuring compliance with project specifications, quality standards, and project schedules. Candidates with GCC/Oil & Gas project experience will be preferred. Key Responsibilities Execute procurement activities for mechanical, piping, structural, electrical, instrumentation, and civil materials required for EPC projects. Review Material Requisitions (MRs), Technical Bid Evaluations (TBEs), BOQs, and project specifications. Identify and evaluate qualified suppliers and subcontractors. Obtain quotations, prepare commercial bid evaluations, and negotiate pricing, delivery schedules, and commercial terms. Issue Purchase Orders (POs) and monitor the procurement cycle until final delivery. Coordinate with Engineering, QA/QC, Planning, Construction, and Logistics teams to ensure timely material availability. Track supplier performance and expedite deliveries to meet project milestones. Ensure all procured materials comply with project specifications, client requirements, and applicable international standards. Resolve procurement-related issues, vendor claims, and material shortages. Maintain procurement records, supplier databases, and procurement reports. Ensure compliance with company procurement policies and contractual obligations. Qualifications Bachelor's Degree in Mechanical Engineering or electrical or civil a Engineering discipline.5–10 years of procurement experience in Oil & Gas, EPC, Petrochemical, or Industrial Construction projects. Minimum 3–5 years of GCC/Middle East experience is preferred. Experience in procuring engineering materials, equipment, valves, piping, structural steel, electrical, and instrumentation items. Strong knowledge of procurement procedures, vendor management, commercial negotiations, and supply chain operations. Familiarity with ERP systems such as SAP, Oracle, or similar procurement software is an advantage. Excellent communication, negotiation, and coordination skills. Ability to work under pressure and meet project deadlines. Preferred Experience Experience working on major Oil & Gas EPC projects. Familiarity with Saudi Aramco, SABIC, ADNOC, or similar client standards is an added advantage. Strong understanding of international procurement standards and project documentation. Employment Benefits Competitive Salary: SAR 5,000 – 7,000 per month

<ul><li><p>Prepare and manage project budgets, cost plans, and cash flow forecasts for MEP works</p></li><li><p>Monitor project costs and report variances against approved budgets</p></li><li><p>Assist in value engineering and cost optimization initiatives</p></li></ul><ul><li><p>Measure MEP works accurately in accordance with contract and standard methods of measurement</p></li><li><p>Prepare, submit, and evaluate interim payment applications</p></li><li><p>Certify subcontractor payments and verify work progress</p></li></ul><ul><li><p>Identify, prepare, and evaluate variations and change orders</p></li><li><p>Prepare and assess claims related to time and cost (EOT, prolongation, etc.)</p></li><li><p>Maintain proper records to support commercial claims</p></li></ul><ul><li><p>Assist in administration of MEP contracts (FIDIC or similar forms)</p></li><li><p>Draft and manage contractual correspondence with clients, consultants, and subcontractors</p></li><li><p>Ensure compliance with contract conditions and company procedures</p></li></ul><ul><li><p>Prepare tender documents and commercial evaluations for MEP subcontract packages</p></li><li><p>Participate in negotiations and subcontract awards</p></li><li><p>Monitor subcontractor performance from a commercial perspective</p></li></ul><ul><li><p>Prepare monthly cost reports, financial statements, and forecasts</p></li><li><p>Maintain accurate commercial records and documentation</p></li></ul><ul><li><p>Work closely with Project Managers, Engineers, Planning, and Procurement teams</p></li><li><p>Attend project meetings and provide commercial input</p></li><li><p>Support QS Manager in overall commercial management of the project</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Degree in Mechanical or Electrical Engineering</p></li><li><p>Minimum 8 to 10 years of experience in MEP quantity surveying</p></li></ul>

SGS is the world’s leading inspection, verification, testing and certification company. We are recognized as the global benchmark for quality and integrity. With more than 89,000 employees, we operate a network of more than 2,600 offices and laboratories around the world. Commissioning Lead will manage end‑to‑end commissioning activities for large-scale data center projects in KSA. The role requires deep technical expertise in mission‑critical infrastructure, strong coordination, and hands-on leadership across all commissioning phases to ensure systems are delivered safely, compliantly, and operationally ready.<br><br><br><br>Job Description<br><br>Develop, implement, and maintain the Commissioning Plan, procedures, test scripts, schedules, and reports in alignment with project milestones. Oversee commissioning of all data center mission‑critical systems, including electrical (MV/LV, generators, UPS, switchgear, ATS/STSs), mechanical (chillers, CRAH/CRAC units, cooling towers), BMS, fire detection and suppression, ELV, DCIM, and security systems. Lead and execute Integrated Systems Testing (IST) and site-wide testing to validate redundancy, resilience, and performance under various operating scenarios. Coordinate closely with design consultants, EPC contractors, vendors, authorities, and client teams to ensure seamless execution of commissioning activities. Review, monitor, and approve contractor commissioning documentation, method statements, test procedures, and results. Chair commissioning and interface meetings, manage issue logs, punch lists, and ensure timely resolution and close‑out of all commissioning findings. Ensure compliance with international standards (ASHRAE, Uptime Institute, NFPA, IEC, IEEE), project specifications, client requirements, and local KSA regulations. Enforce strict HSE compliance during all commissioning and testing activities. Support Tier certification processes (if applicable) and client inspections. Ensure accurate and complete commissioning records, support preparation of O&M manuals, as-built documentation, training programs, and final handover to operations teams. Lead client acceptance testing and obtain final system sign‑off. Lead and manage the entire commissioning lifecycle, including commissioning planning, pre‑commissioning, functional testing, integrated systems testing (IST), final acceptance, and handover. <br><br>Qualifications<br><br>Bachelor’s Degree in Electrical, Mechanical, or Building Services Engineering Professional certifications preferred (CxA, PMP, Uptime Accredited Tier Specialist)10–15 years of overall experience in MEP/commissioning Minimum 5–7 years in data center commissioning, preferably hyperscale or colocation projects Proven experience managing large, complex, mission-critical facilities.

<ul><li>Monitor machine operations in real-time to detect any anomalies, making immediate adjustments as necessary to maintain efficiency.</li><li>Set up and calibrate machines according to production specifications, ensuring optimal performance and product quality.</li><li>Conduct routine maintenance and troubleshooting on machines to minimize downtime and ensure consistent production flow.</li><li>Document production data, including quantities produced and machine performance metrics, for quality control and reporting purposes.</li><li>Work closely with the quality assurance team to perform inspections and tests on produced items to ensure they meet industry standards.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Strong mechanical aptitude with the ability to troubleshoot and resolve machine malfunctions effectively.</p></li><li><p>High school diploma or equivalent; technical certifications in machine operation or related fields are a significant advantage.</p></li><li><p>Familiarity with industry-specific machinery and tools, including CNC machines, lathes, and milling machines.</p></li><li><p>Proficient in reading and interpreting technical drawings, blueprints, and schematics to ensure precise machine setup.</p></li><li><p>Excellent communication skills to collaborate with team members and convey technical information clearly.</p></li><li><p>Detail-oriented with a commitment to quality, consistently producing high-standard output and identifying areas for improvement.</p></li><li><p>Installs, services, and repairs water and sewage pumps and related controls. </p></li></ul>

Company Description ALTEC Energy delivers innovative solutions to optimize energy usage, integrate renewable sources, and develop advanced storage systems for a wide range of industrial clients. The company implements smart Building Management Systems (BMS) that improve operational performance and reduce energy costs. By combining efficiency with sustainability, ALTEC Energy supports organizations in achieving long-term environmental and economic goals. Team members contribute directly to a cleaner, greener future through practical, high-impact engineering projects.<br>Role Description The Energy Efficiency Engineer - Electrical is a full-time, on-site role based in Saudi Arabia. This role focuses on analyzing electrical energy consumption in buildings and industrial facilities, identifying inefficiencies, and recommending technical improvements to reduce energy use and costs. Day-to-day tasks include conducting energy audits, reviewing electrical designs and systems, modeling energy performance, and supporting the implementation of energy-saving measures in collaboration with mechanical, controls, and BMS teams. The engineer will prepare technical reports, proposals, and documentation, support compliance with relevant codes and standards, and coordinate with clients and internal stakeholders to ensure successful project delivery. The role also involves monitoring project performance, validating savings, and suggesting continuous optimization strategies for electrical systems and integrated BMS solutions.<br>Qualifications<br> Candidates should possess strong Energy Engineering and Energy Management skills, with experience in evaluating and optimizing electrical energy systems. Candidates should possess solid Analytical Skills, including data analysis, energy modeling, and performance evaluation using relevant tools and software. Candidates should possess foundational Mechanical Engineering and general Energy knowledge to collaborate effectively on multidisciplinary efficiency projects. Relevant bachelor’s degree in Electrical Engineering, Energy Engineering, or a closely related field; professional certifications in energy auditing or management are an advantage. Knowledge of building services, electrical distribution, HVAC interfaces, and BMS/automation systems, preferably within industrial or commercial facilities. Ability to interpret technical drawings and specifications, prepare clear reports and presentations, and communicate effectively with technical and non-technical stakeholders. Experience working on-site, managing multiple projects, and adhering to safety standards and local regulations; prior experience in Saudi Arabia or the GCC region is beneficial. Proactive problem-solving approach, attention to detail, and commitment to sustainability and continuous improvement in energy performance.

<p>The TT Technician will be responsible for planning, executing, and supervising all Thru Tubing fishing activities on our rigs. Working closely with Coiled Tubing and Snubbing units, the technician will ensure safe, efficient retrieval or milling of downhole obstructions while maintaining real time operational control and mentoring on site personnel.</p><p>Oversee rig up of Thru Tubing fishing equipment on wellheads and integrate with Coiled Tubing or Snubbing units. Operate and monitor bottom hole assemblies (BHAs) such as hydraulic motors, fishing jars, mills, overshoots, spears, and cutters. Perform precise engineering calculations (string weight, overpull limits, torque, fluid hydraulics, pump rates) before and during runs. Evaluate downhole fish geometry and condition; execute targeted retrieval, milling, or washing per the job program. Continuously track wellhead pressure, flow rates, string weight, and torque to ensure stability and detect anomalies. Supervise on site crew, directing junior technicians and rig personnel to maintain efficiency and safety. Execute complex fishing runs in High Pressure High Temperature (HPHT), highly deviated, or horizontal wellbore environments. Provide immediate field troubleshooting for issues such as stuck tools, lost circulation, or unexpected downhole resistance.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum diploma in Mechanical Engineering or equivalent with at least 3 years of O&amp;G tool experience. Strong knowledge of Coiled Tubing and Snubbing unit operations related to Thru Tubing fishing. Ability to read and interpret engineering drawings, technical tool manuals, and well schematics. Proficiency in hydraulic and mechanical calculations required for fishing operations. Experience supervising junior technicians and rig crews in a high risk environment.</p>

<p>We are seeking a motivated and enthusiastic Fresh Graduate Mechanical Engineer to join our Project Management Office (PMO). This role provides an excellent opportunity for recent graduates to develop their technical and project management skills by supporting planning, scheduling, reporting, document control, quality monitoring, and coordination activities across multiple projects. The successful candidate will work closely with experienced engineers and project managers to gain hands-on exposure to project controls and construction management.</p><p><strong>Responsibilities:</strong></p><ul><li>Support the PMO team in monitoring project progress.</li><li>Assist in coordinating activities between engineering, construction, consultants, and contractors.</li><li>Participate in project meetings and prepare meeting minutes.</li><li>Follow up on action items assigned by the PMO team.</li><li>Assist in updating project schedules.</li><li>Monitor project milestones and deliverables.</li><li>Support progress tracking against approved baselines.</li><li>Help prepare weekly and monthly progress reports.</li><li>Maintain project documentation and records.</li><li>Assist in document control activities.</li><li>Ensure proper filing of technical documents and correspondence.</li><li>Support preparation of presentations and project dashboards.</li><li>Review engineering drawings for completeness.</li><li>Assist in quantity take-offs and basic engineering calculations.</li><li>Support design coordination between various disciplines.</li><li>Participate in technical inspections when required.</li><li>Collect project data from different stakeholders.</li><li>Prepare progress reports and KPI updates.</li><li>Assist in generating project performance metrics.</li><li>Support management reporting requirements.</li><li>Ensure compliance with company procedures and PMO standards.</li><li>Assist in monitoring quality documentation.</li><li>Support implementation of project governance processes.</li><li>Participate in internal audits when required.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Requirements</strong></p><ul><li>Bachelor's Degree in Mechanical Engineering.</li><li>Fresh Graduate or up to 1 year of experience.</li></ul>

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About Baker Hughes</h3> <p style="margin:0 0 12px; **********<strong>;">Baker Hughes is a global energy technology company operating in the oil and gas sector across more than 120 countries. The Commercial &amp; Sales organization is responsible for driving growth through customer partnerships, commercializing hydrocarbons, and delivering integrated equipment and service solutions. The team focuses on digital transformation and energy transition, utilizing data-driven insights to optimize sales performance and enhance customer value.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">The Role of Mechanical Design Engineer - Drill Bits</h3> <p style="margin:0 0 12px; </strong>********<strong>;">As a Mechanical Design Engineer specializing in Drill Bits, you will join a team focused on solving technical problems and improving product performance and process efficiency. This is a full-time position requiring 2-5 years of experience.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Creating Drill Bit design and manufacturing packages using 3-D modeling and data management systems.</li> <li style="margin:0 0 6px;">Interfacing with Product Line Management, Operations, Manufacturing, and Technology groups to enhance product performance and process efficiency.</li> <li style="margin:0 0 6px;">Documenting and sharing lessons learned with cross-functional teams.</li> <li style="margin:0 0 6px;">Supporting Manufacturing with problem-solving and issue resolution.</li> <li style="margin:0 0 6px;">Conducting all activities in adherence to company non-negotiables and applicable processes for HSE, Quality, Legal Compliance, and Cultural pillars.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Working at Baker Hughes</h3> <p style="margin:0 0 12px; </strong>********<strong>;">Baker Hughes prioritizes its workforce, investing in the health and well-being of employees. The company focuses on developing and engaging talent, fostering an environment where individuals can contribute authentically. Training and rewards are provided to develop leaders at all levels.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Commitment to Innovation</h3> <p style="margin:0 0 12px; </strong>**********;">Baker Hughes has a history of innovation in the energy sector. The company encourages pushing boundaries and values contributions that embrace change. Compensation packages reflect the importance placed on employee input.</p>

Role Purpose<br>To oversee and supervise all Civil, Mechanical, Electrical and Construction projects and program. Also, facilitate compliance of OHS standards and monitor unsafe conditions, unsafe acts and other activities in order to ensure a safe and healthy working environment for SANS employees within the set KPIs, agreed budgets and adopted policies and procedure

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Description <br></p><br><p>Responsible for the design and engineering of pressure vessels, storage tanks, and heat exchangers per ASME, API, and TEMA standards; </p><br><br><p>ensures compliance with Saudi Aramco requirements and client-specific certifications; performs mechanical calculations using PV Elite, COMPRESS, or similar tools; manages and reviews outsourced design deliverables; </p><br><br><p>supports bid evaluations, scope reviews, and client clarifications; coordinates with QA/QC for inspection and material compliance; </p><br><br><p>prepares nozzle loadings, supports, weld designs, and assembly drawings; provides fabrication support and resolves shop floor queries; and integrates all design documents into complete project engineering deliverables.</p><br><br>Requirements <br><p><strong>Qualification</strong>: BE Mechanical</p><br><br><p><strong>Specialization</strong>: Static equipment Design</p><br><br><p><strong>Experience</strong>: 3-8 years</p><br><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>Support the inspection and quality assurance of mechanical, electrical, and plumbing systems on construction projects. The ideal candidate will ensure that MEP installations are executed in accordance with approved designs, specifications, and industry standards.</p><p>Duties and responsibilities</p><ul><li>Conduct site inspections of MEP systems, including HVAC, plumbing, fire protection, and electrical installations.</li><li>Verify contractor compliance with approved drawings, technical specifications, and local codes.</li><li>Monitor construction activities and report any deviations or non-conformances.</li><li>Coordinate with contractors and project teams to resolve technical issues.</li><li>Review MEP shop drawings, method statements, and material submittments.</li><li>Prepare detailed daily inspection reports and maintain accurate records.</li><li>Assist in testing, commissioning, and handover processes for MEP systems.</li><li>Ensure that work is performed in a safe and environmentally compliant manner.</li><li>Support project engineers with technical site inspections and documentation.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s Degree in Mechanical, Electrical, or Building Services Engineering from a recognized university with a minimum of 3 years of relevant experience.</li><li>Diploma in a related engineering discipline from a recognized institution with a minimum of 7 years of relevant experience.</li><li>Solid knowledge of MEP systems and construction practices.</li><li>Familiarity with relevant codes and standards (e.g., NFPA, IEC, ASHRAE, etc.).</li><li>Ability to read and interpret MEP drawings and technical documents.</li><li>Strong attention to detail and a proactive approach to quality assurance.</li><li>Good communication and reporting skills.</li><li>Computer literacy, including proficiency in MS Office; knowledge of AutoCAD or similar tools is a plus.</li><li>Ability to work effectively on-site in coordination with multi-disciplinary teams.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>To oversee and optimize the safe, efficient, and reliable operation of the Gas - Oil separation Plant (GOSP) Facilities. The Engineer provides technical support technical support, monitors plant performance, troubleshoots operational issues, and leads continuous improvement initiatives to ensure compliance with safety, environmental, and operations standards. </p><p>Applies approved sections policies, processes, and procedures and monitors adherence so that work is carried out in a controlled manner.</p><p>Support the daily operation of the GOSP facilities, ensuring adherence to operational procedures, safety standards, and environmental policies. </p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Bachelor's degree in Mechanical, Chemical, or Process Engineering, or equivalent. </p><p>Relevant Safety, process, and control System certifications are preferred. </p><p>Minimum 4 years of experience in Operations and Maintenance in Oil &amp; Gas and utility plants. </p><p><br></p><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b><u>Qualification:</u></b></p><ul><li>Bachelor’s degree in civil or mechanical engineering.</li><li>Other engineering disciplines are not preferred.</li></ul><p><b><u>Job Responsibilities:</u></b></p><ul><li>Prepare material take-offs (MTO) based on drawings, BOMs, and client technical documents.</li><li>Calculate material weight and surface area for structural profiles.</li><li>Estimate material costs based on material grade, including connection bolts, anchor bolts, leftover materials, and scrap.</li><li>Estimate production man-hours/ton, production duration, and production costs based on the structure and fabrication requirements.</li><li>Calculate painting material and labour costs or hot-dip galvanizing costs.</li><li>Estimate indirect expenses and administrative overheads.</li><li>Calculate packing and transportation costs.</li><li>Prepare unit cost and total project cost.</li><li>Apply the profit margin, calculate the final unit rates, and total project price.</li><li>Prepare techno-commercial offers covering:</li><li>Scope of work</li><li>Material specifications, including fasteners</li><li>Fabrication and welding procedures</li><li>Inspection and QA/QC requirements</li><li>Material finishing requirements</li><li>Installation procedures</li><li>Commercial terms and pricing</li><li>Exclusions</li><li>Coordinate with other departments, including Sales, Design, Production, Procurement, Planning, and QA/QC.</li><li>Minimum <b>5 years of experience</b> in the <b>steel structure fabrication industry</b>.</li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b><u>Additional Knowledge / Preferred Skills:</u></b></p><ul><li>Preparation of material submittals for client approval.</li><li>Awareness of preparing compliance statements.</li><li>Good knowledge of steel material properties, including chemical and mechanical properties, and material grades according to ASTM, BS/EN, JIS, DIN, and other international standards.</li><li>Knowledge of paint selection and application methods, including fireproofing, heat insulation, and climatic/environmental protection requirements.</li><li>Familiarity with hot-dip galvanizing requirements and international standards such as <b>ASTM A123, ASTM A153/A153M</b>, and related standards.</li><li>Knowledge of production time studies and estimation of fabrication productivity in a steel fabrication plant.</li></ul><p><br></p></div>