Ship Mechanic Jobs

<p>The role operates drill rigs, excavators, and haul trucks to extract ore and move materials according to the daily mine plan.</p> <p>This position adheres to all site safety protocols including Permit to Work systems and wears required personal protective equipment at all times.</p> <p>The operator conducts daily pre-start inspections and reports mechanical issues to maintenance teams to prevent equipment failure.</p> <p>This role records accurate data on tonnage moved, fuel usage, and operating hours in the digital shift log system.</p> <p>The operator assists drilling crews by positioning equipment accurately and securing blast zones during explosive operations.</p> <p>This position implements dust suppression and spill management measures to comply with environmental regulations and site permits.</p> <p>The role provides detailed verbal and written handover reports to incoming shifts regarding production status and safety concerns.</p> <p>This position participates in regular emergency drills and responds appropriately to incidents under the direction of site leadership.</p> <p>High school diploma or vocational certificate in heavy equipment operation is required.</p> <p>At least three years of experience operating mining machinery in an industrial setting is necessary.</p> <p>Valid Saudi driving license for heavy vehicles must be current and active.</p> <p>Knowledge of HSE principles including Lockout Tagout and hazard identification is essential.</p> <p>Ability to read basic mine plans and follow technical instructions in English and Arabic is required.</p> <p>Physical fitness to work outdoors in varying weather conditions and shift patterns is mandatory.</p> <p>Proficiency in using digital logging tools and radio communication systems is expected.</p> <p>Understanding of basic mechanical troubleshooting for diesel and hydraulic systems is preferred.</p> <p>Certification from the Technical and Vocational Training Corporation in heavy equipment operation.</p> <p>Previous experience in gold or precious metal mining projects in Saudi Arabia.</p> <p>Training in first aid and fire fighting specific to industrial mining environments.</p> <p>Familiarity with GPS-guided drilling and haulage systems.</p> <p>Zero recordable safety incidents or environmental breaches over the assessment period.</p> <p>Achievement of 100 percent of individual tonnage and drilling meter targets.</p> <p>Equipment availability rate maintained above 90 percent through proactive inspections.</p> <p>Completion of all mandatory training modules within the first six months.</p> <p>Positive performance review scores for reliability and procedural adherence.</p> <p>Proficiency demonstrated in operating at least two distinct types of heavy machinery.</p> <p>Accurate and timely submission of all shift logs and production reports.</p> <p>Saudi Gold Refinery welcomes applications from all qualified candidates. Hiring decisions are made based on role requirements, skills, experience, and alignment with Saudization and Vision 2030 priorities.</p><p><strong>Desired Candidate Profile</strong></p><p>High school diploma or vocational certificate in heavy equipment operation is required.</p> <p>At least three years of experience operating mining machinery in an industrial setting is necessary.</p> <p>Valid Saudi driving license for heavy vehicles must be current and active.</p> <p>Knowledge of HSE principles including Lockout Tagout and hazard identification is essential.</p> <p>Ability to read basic mine plans and follow technical instructions in English and Arabic is required.</p> <p>Physical fitness to work outdoors in varying weather conditions and shift patterns is mandatory.</p> <p>Proficiency in using digital logging tools and radio communication systems is expected.</p> <p>Understanding of basic mechanical troubleshooting for diesel and hydraulic systems is preferred.</p> <p>Certification from the Technical and Vocational Training Corporation in heavy equipment operation.</p> <p>Previous experience in gold or precious metal mining projects in Saudi Arabia.</p> <p>Training in first aid and fire fighting specific to industrial mining environments.</p> <p>Familiarity with GPS-guided drilling and haulage systems.</p>

<p>&nbsp;At Alstom, we understand transport networks and what moves people. From high-speed trains, metros, monorails, and trams, to turnkey systems, services, infrastructure, signalling and digital mobility, we offer our diverse customers the broadest portfolio in the industry. Every day, more than 80 000 colleagues lead the way to greener and smarter mobility worldwide, connecting cities as we reduce carbon and replace cars. Purpose of the Role Lead and supervise Platform Screen Door maintenance activities across Line 3, ensuring safe working practices, high system availability, quality execution, rapid fault recovery, accurate reporting, and continuous development of PSD technicians. Key Responsibilities • Lead PSD technicians during daily maintenance, emergency response, inspections, testing, troubleshooting, and recovery activities. • Ensure all PSD maintenance activities are performed safely in accordance with HSE rules, approved method statements, Permit-to-Work requirements, isolation instructions, and LOTO procedures. • Allocate manpower, tools, spares, vehicles, and test equipment based on maintenance priorities, operational requirements, and service availability targets. • Supervise preventive and corrective maintenance on platform screen doors, control panels, drive mechanisms, sensors, interlocks, control interfaces, and associated field equipment. • Lead technical troubleshooting for PSD failures, support complex fault diagnosis, and escalate technical issues to Engineering with accurate evidence. • Review completed work orders, check maintenance records, validate defect closure, and ensure maintenance reports are accurate, complete, and submitted on time. • Coordinate with OCC, station operations, possession control, safety teams, planners, and other disciplines during service-impacting works and recovery interventions. • Conduct toolbox talks, shift briefings, safety observations, and on-the-job coaching to improve technician competence, work quality, and safety behavior. • Support incident investigation, RCA, repeated failure analysis, configuration changes, modifications, and continuous improvement initiatives. • Ensure readiness of emergency response equipment, critical spares, calibrated tools, and communication channels for rapid PSD fault recovery. Required Competencies Technical competencies • PSD system architecture and operating principles • PSD electrical and mechanical troubleshooting • Door Control units, safety circuits, interlocks, and control panels • PLC/control interface understanding • Permit-to-Work, isolation, and LOTO discipline • Maintenance quality control • Technical reporting and defect evidence collection • Root Cause Analysis and repeated failure prevention Leadership competencies • Team leadership and shift supervision • Coaching and mentoring • Decision making under service pressure • Resource deployment • Conflict resolution • Performance follow-up • Stakeholder coordination Behavioral competencies • Safety leadership • Accountability • Calm response during incidents • Clear communication • Discipline and consistency • Continuous improvement mindset Qualifications and Experience • Diploma or bachelor degree in Electrical, Electronics, Mechatronics, Mechanical, or equivalent technical discipline. • Minimum 5 years of maintenance experience, preferably including railway PSD systems. • Previous supervisory, lead technician, or team coordination experience is preferred. • Competency in PTW, LOTO, risk assessment, and technical reporting is required. You don t need to be a train enthusiast to thrive with us. We guarantee that when you step onto one of our trains with your friends or family, you ll be proud. If you re up for the challenge, we d love to hear from you! Important to note As a global business, we re an equal-opportunity employer that celebrates diversity across the 63 countries we operate in. We re committed to creating an inclusive workplace for everyone. Job Segment: Manager, Management</p><p><strong>Desired Candidate Profile</strong></p><h4>Qualifications and Experience</h4><ul><li>Diploma or bachelor degree in Electrical, Electronics, Mechatronics, Mechanical, or equivalent technical discipline.</li><li>Minimum 5 years of maintenance experience, preferably including railway PSD systems.</li><li>Previous supervisory, lead technician, or team coordination experience is preferred.</li><li>Competency in PTW, LOTO, risk assessment, and technical reporting is required.</li></ul>

We are looking for an experienced Project Management Engineer to join our team and oversee project, maintenance, and operational activities.<br>Key Responsibilities:<br>Plan and schedule maintenance and project activities Manage and follow up on work orders and technical teams Monitor performance and project progress Prepare daily, weekly, and monthly reports Coordinate with the Project Manager, consultants, and stakeholders Manage resource and material requirements Ensure effective execution of O&M activities<br>Requirements:<br>Bachelor’s Degree in Electrical or Mechanical Engineering Minimum 10 years of professional experience At least 5 years of relevant experience in maintenance and operations Valid Saudi Council of Engineers (SCE) accreditation Strong experience in Project Management and O&M contracts Proven experience managing multidisciplinary technical teams Knowledge of maintenance planning, scheduling, and digital asset management systems Strong leadership, communication, coordination, and reporting skills Excellent English communication skills Proficiency in Microsoft Office and relevant maintenance/project management software

Purpose:<br>Provide general hands-on assistance to oilfield operations to support ESP start up, Monitoring, basic troubleshooting and reporting activities, whilst adhering to APC and client’s contractual and QHSE standards.<br>Responsibilities:<br>Assist in wiring, testing, and troubleshooting electrical systems, VSD and control panels. Read and interpret basic electrical schematics and diagrams. Support the installation of electrical components such as motors, switches, and circuit breakers. Perform routine inspections and preventive maintenance tasks. Use hand tools and basic electrical testing equipment (e.g., multimeters). Maintain clean and organized workspaces and tools. Follow safety protocols and company procedures during all tasks. Document work performed and report issues to supervisors. Collaborate with other technicians and departments on projects.<br>Required Skills and Qualifications:<br>Diploma in Electrical or Mechanical Technology is required.0 to 1 year of experience in Maintenance field. Good reporting and documentation skills.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Position Summary</p><p>The PDI Technician is responsible for conducting Pre-Delivery Inspections (PDI) on all new vehicles prior to customer handover, ensuring each unit is delivered in flawless mechanical, electrical, and cosmetic condition.</p><p>The role serves as the final quality gate before customer delivery and directly impacts brand reputation, customer satisfaction, NPS, and warranty claim prevention at the point of handover. The PDI Technician operates under strict OEM checklists, zero-defect standards, and dealership delivery timelines to ensure every vehicle meets manufacturer and customer expectations before release.</p><p>By maintaining delivery quality and preventing post-handover issues, the PDI Technician plays a critical role in protecting both customer trust and dealership operational performance.</p><p>Key Responsibilities</p><p>Pre-Delivery Inspection</p><p>• Perform comprehensive Pre-Delivery Inspections on all new vehicles in line with OEM-defined check sheets, delivery standards, and dealership processes</p><p>• Verify mechanical systems, electrical functions, fluid levels, battery health, software status, and cosmetic condition before release for delivery</p><p>• Inspect body panels, paint condition, interior trim, lighting systems, tyres, and all factory-fitted equipment to ensure zero visible defects</p><p>• Activate, configure, and update vehicle systems including infotainment, telematics, connected services, and OEM software updates where required</p><p>Defect Identification &amp; Rectification</p><p>• Identify and document transit damage, manufacturing defects, missing components, or quality issues prior to vehicle handover</p><p>• Perform minor rectifications immediately where possible and escalate major technical or cosmetic issues to the Workshop Supervisor for resolution</p><p>• Coordinate with Body Shop, Polisher, Parts, and Accessories teams to ensure complete rectification before final delivery approval</p><p>• Ensure all corrective actions are completed within agreed timelines to avoid delivery delays and customer dissatisfaction</p><p>Accessory Fitment &amp; Vehicle Preparation</p><p>• Install approved accessories and dealer-fit options in accordance with OEM standards and dealership quality requirements</p><p>• Verify correct fitment, functionality, and final appearance of all installed accessories before release</p><p>• Conduct final road tests where required and confirm valet readiness, fuel level, EV charging status, and delivery presentation standards</p><p>• Prepare the vehicle for final handover and release it to the Sales or Handover team with full documentation completion</p><p>Quality, Safety &amp; Reporting</p><p>• Maintain accurate PDI records, defect logs, accessory installation reports, and rectification history within the Dealer Management System (DMS)</p><p>• Ensure compliance with OEM warranty policies, transit damage procedures, stockyard controls, and pre-delivery audit requirements</p><p>• Follow all workshop safety procedures, PPE usage standards, housekeeping expectations, and HSE compliance protocols</p><p>• Support continuous improvement initiatives related to delivery quality, defect prevention, and operational efficiency within PDI operations</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Educational Requirements</p><p>• Automotive Diploma, Vocational Certificate, or equivalent technical qualification</p><p>• OEM PDI certification or manufacturer technical training is highly preferred</p><p>Experience Requirements</p><p>• Minimum 2–4 years of workshop, PDI, or vehicle preparation experience within a franchised automotive dealership environment</p><p>• Previous hands-on exposure to new vehicle delivery preparation and OEM PDI processes is strongly preferred</p><p>• Experience with passenger vehicles, premium brands, or EV delivery preparation is considered an advantage</p><p>Technical Skills</p><p>• Strong mechanical and electrical understanding sufficient to verify factory condition and delivery readiness</p><p>• Familiarity with OEM diagnostic tools and systems for software updates, configuration, and system activation</p><p>• Ability to interpret PDI check sheets, accessory fitment guides, OEM bulletins, and technical service procedures</p><p>• Basic working knowledge of DMS platforms for job booking, accessory requests, and defect reporting</p><p>• Awareness of EV-specific PDI requirements including battery charge level, HV safety checks, and software validation</p></div>

<p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p>Parsons is looking for a talented Rolling Stock Engineer to join our team. The Rolling Stock Engineer will be part of a team responsible for the technical integrity of the rolling stock, providing technical guidance on rolling stock design, development, and safety. The project includes at-grade, elevated, and underground tunnel rail sections, with passenger rolling stock operating under automatic operation. Reporting to the Lead Rolling Stock Engineer, the Rolling Stock Engineer will perform design reviews, facilitate the resolution of any construction or design issues, ensure contractual compliance, and ensure smooth integration with other systems such as signalling, platform screen doors, communications, and civil infrastructure. The chosen candidate will be an expert in the delivery of rolling stock and the acceptance of its assets.</p><h2>What You'll Be Doing:</h2><ul><li>Supporting the Lead Rolling Stock Engineer in project delivery by providing expert technical advice and support with regards to rolling stock to the wider project team</li><li>Defining and developing interface specifications to support the supplier design</li><li>Liaising with the project controls team to determine schedules and monitor design progress</li><li>Establishing and maintaining adherence to project deliverables with respect to safety, quality, cost and schedule</li><li>Analysing the rolling stock related RAMS performance against the client s design specifications</li><li>Analysing the rolling stock related operation and maintenance.</li><li>Reviewing and approving the Design Build contractor s rolling stock system and sub-system designs to ensure compliance with the client s requirements</li><li>Reviewing and monitoring the rolling stock design specifications and standards for all subsystems such as HVAC, door control, propulsion and control, auxiliary power, wiring, automatic train control (ATS), carbody, brakes, couplers ,gangway and bogies</li><li>Overseeing the assessment of differing train configurations, passenger capacity, interface problems and performance quantifications</li><li>Coordinating and monitoring the rolling stock related interfaces and integration with other disciplines such as platform screen doors, signaling, telecoms and power supply</li><li>Conducting technical investigations or fault analyses</li><li>Conducting site visit and inspections to verify and monitor rolling stock works quality and progress</li><li>Ensuring all reporting requirements, are met and maintain accurate records concerning rolling stock related data</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Mechanical / Electrical Engineering degree, diploma or professional qualification</li><li>Minimum 12 years mechanical engineering work experience</li><li>Experience of working on large, complex and multidisciplinary projects</li><li>Current or recent broad knowledge of the rail industry</li><li>Significant technical experience relevant to the design delivery of the mechanical aspects of rolling stock</li><li>Demonstrable experience in the design of rolling stock</li><li>Strong understanding of railway approvals, practices and standards including EN 50126, EN 50129, IEC 61133, IEC1287 and NFPA 130</li><li>Strong understanding of railway approvals, practices and standards including UIC- 615, UIC-515, IEC 61133 and NFPA 130, EN12663,EN15827</li><li>Railway interiors and paneling experience</li><li>Working experience with Bombardier s/Siemens rolling stock</li><li>Chartered Engineer status</li><li>Knowledge of rail communication concepts and principles</li><li>Knowledge of overhead traction power reticulation systems</li><li>Strong client-facing skills</li><li>Excellent English language skills (written and verbal)</li></ul>

<p>SYSTRA is one of the world's leading engineering and consultancy groups specialising in public transport and sustainable mobility. With over 10,300 employees, SYSTRA's mission is to design safe and sustainable transport solutions to bring people together, develop social inclusion and facilitate access to employment, education and leisure throughout the world. For 65 years, the Group has been working alongside cities and regions to contribute to their development by creating, improving and modernising their infrastructure and transport systems, throughout the life cycle of their projects. SYSTRA is involved from the earliest stages of design through to the testing, deployment and maintenance phases. The company provides all its services in over 80 countries worldwide and generates 74% of its turnover internationally. With its new services, SYSTRA supports its clients and partners in their digital, ecological and energy transition, in order to invent the mobility of tomorrow.</p><p>Context SYSTRA s Mobility &amp; Railway Business Unit is anticipating future growth, with new metro projects. To support these potential opportunities, we are looking for an experienced Deputy Resident Engineer (Civil) to join our project teams and contribute to our mobility solutions. The Mechanical Engineer will p rovide engineering and technical support for all mechanical works performed on site therefore, SYSTRA is looking for Deputy Resident Engineer (Civil) to join our team to be based at Riyadh , Saudi Arabia.</p><p>Missions/Main Duties</p><ul><li>Lead a multidisciplinary team of engineers and inspectors across civil, mechanical, electrical, and architectural disciplines.</li><li>Monitor and coordinate contractor activities within the assigned rail project area to ensure safe and efficient project delivery.</li><li>Develop discipline-specific construction schedules and monitor progress against project milestones.</li><li>Provide schedule updates, progress assessments, and reporting to the Construction Manager.</li><li>Monitor material procurement, delivery, and availability to ensure construction activities remain on schedule.</li><li>Verify that delivered materials comply with project specifications, quality requirements, and industry standards.</li><li>Maintain first-level quality assurance oversight to ensure all installation works are executed in accordance with approved plans, specifications, and applicable standards.</li><li>Supervise construction engineering activities and provide technical expertise across one or more construction disciplines.</li><li>Ensure that inspections and testing activities are conducted, witnessed, documented, and completed in accordance with approved procedures.</li><li>Collaborate with construction management teams to identify and mitigate safety, environmental, and operational risks.</li><li>Promote safe work practices and ensure compliance with site-specific safety requirements and industry standards.</li><li>Coordinate with design engineering teams to support construction activities and resolve technical issues.</li><li>Review and interpret design drawings and specifications to ensure work is executed in accordance with the latest approved revisions.</li><li>Provide technical solutions to engineering and construction challenges and coordinate implementation with project stakeholders.</li><li>Maintain project records, progress reports, back-charge documentation, and other project controls documentation as required.</li><li>Coordinate and organize project documentation for final handover and project closeout activities.</li><li>Interface with clients, contractors, and senior management to support successful project execution.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Engineering, Construction Management, or a related field.</li><li>Minimum 8 years of post-graduate experience on major civil or infrastructure projects.</li><li>Experience on rail, metro, transit, or related transportation projects.</li><li>Proven experience leading and managing multidisciplinary engineering and construction teams.</li><li>Strong problem-solving, coordination, and organizational skills.</li><li>Experience with construction materials testing and quality assurance, including soil, concrete, grout, dewatering, and load testing activities.</li><li>Strong understanding of construction planning, material delivery, staging, scheduling, and site coordination.</li><li>Knowledge of construction quality, safety, and compliance requirements.</li><li>Excellent communication and stakeholder management skills.</li></ul>

<p>Lead and manage all company operations to ensure projects are executed efficiently and effectively, achieving the highest standards of quality while adhering to schedule and budget. Optimize resource utilization, enhance operational performance, and ensure compliance with regulations, policies, and professional standards to support the company s strategic objectives, improve client satisfaction, and sustain business growth.</p><p><strong>Desired Candidate Profile</strong></p><h2>Qualifications &amp; Experience</h2><ul><li>Bachelor s degree in Engineering (Civil, Architectural, Mechanical, Electrical, or a related field).</li><li>A Master s degree in Business Administration (MBA), Project Management, or Engineering is preferred.</li><li>Minimum 10 years of experience in the engineering consultancy sector.</li><li>Minimum 5 years of experience in a leadership or operations management role.</li></ul><h2>Skills</h2><ul><li>Leadership and team management.</li><li>Strategic and operational planning.</li><li>Project management.</li><li>Resource management.</li><li>Time management and prioritization.</li><li>Analysis, decision-making, and problem-solving.</li><li>Budget preparation and cost control.</li><li>Strategic thinking.</li><li>Negotiation and stakeholder management.</li><li>KPI development and analysis.</li><li>Risk management.</li><li>Communication and presentation skills.</li><li>Knowledge of quality management systems and compliance.</li><li>Proficiency in using specialized software and systems.</li></ul>

<p>Operate mobile cranes following OEM guidelines and lifting plans. Perform pre-operation checks on brakes, cables, safety systems, and hydraulic components. Ensure proper setup and load balance before each lift. Report mechanical faults or unsafe conditions to the maintenance team immediately. Maintain daily logs and operation records as per site requirements. Follow site supervisor instructions and comply with safety and environmental policies. Support team operations to ensure efficient and accident-free lifting activities.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum 3+ years of experience operating LTM1050 (50-ton) mobile cranes. Age: 40 years and below. GCC experience preferred with valid/unexpired operator license. Knowledge of crane load charts, rigging procedures, and lifting safety standards. Basic to intermediate English communication skills. Medically fit for heavy equipment operation. Saudi Aramco Certification Allowance: 300 SAR after passing certification.</p>

<p>We are hiring a Restaurant Maintenance Technician to carry out preventive and corrective maintenance of restaurant equipment and facility systems. The candidate should have hands-on experience with kitchen equipment, refrigeration, HVAC, plumbing, and electrical maintenance.</p><p><b>Key Responsibilities:</b></p><ul><li>Inspect, troubleshoot, and repair kitchen equipment such as ovens, fryers, grills, refrigerators, freezers, chillers, and washing machines.</li><li>Perform maintenance of HVAC, electrical, plumbing, and refrigeration systems.</li><li>Conduct preventive maintenance to minimize equipment downtime.</li><li>Diagnose faults and replace defective components.</li><li>Maintain maintenance records and ensure compliance with safety standards.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>ITI/Diploma in Electrical, Mechanical, Refrigeration &amp; Air Conditioning (RAC), or a related trade.</li><li>3 5 years of experience in restaurant, hotel, or commercial kitchen equipment maintenance.</li><li>Strong knowledge of refrigeration, HVAC, electrical, and plumbing systems.</li><li>Ability to read technical manuals and troubleshoot equipment faults.</li><li>Good problem-solving skills and ability to work independently.</li></ul>

<ul><li>Lead the design, installation, and commissioning of complex industrial boiler systems, ensuring compliance with all safety and environmental regulations.</li><li>Develop and implement advanced predictive maintenance strategies to minimize downtime and optimize boiler performance across multiple sites.</li><li>Troubleshoot and resolve critical operational issues with boilers and associated auxiliary equipment, often under high-pressure, time-sensitive conditions.</li><li>Oversee the budget and resource allocation for boiler maintenance, repair, and upgrade projects, achieving cost-efficiencies without compromising safety or reliability.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Possesses a Bachelor's degree in Mechanical Engineering or a related field; Master's degree is a plus.</p></li><li><p>Holds a Professional Engineer (PE) license, demonstrating a high level of engineering competence.</p></li><li><p>Certified Boiler Operator (CBO) or equivalent certification, validating practical expertise.</p></li><li><p>Minimum of 7-10 years of progressive experience in industrial boiler engineering and operations, preferably in powerplants.</p></li></ul>

<p>Holder of Diploma in Aircraft Maintenance, Mechanical Engineering, or Electrical Engineering.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Based on production drawings, technical requirements, and welding process documents, complete welding operations for equipment components, metal structural parts, and related components.</p><p><br></p><p>Proficient in operating related welding equipment, completing spot welding, assembly, tack welding, and formal welding according to process requirements.</p><p><br></p><p>Based on product material, thickness, and structural requirements, reasonably select welding methods, welding materials, and related process parameters.</p><p><br></p><p>Responsible for pre-weld workpiece inspection, groove treatment, post-weld cleaning, and weld appearance self-inspection to ensure welding quality meets technical standards.</p><p><br></p><p>Responsible for daily maintenance of welding equipment, tooling fixtures, and work areas, and promptly report any equipment abnormalities.</p><p><br></p><p>Strictly comply with factory production management systems, quality management requirements, and safety operating procedures, implementing fire prevention, electric shock prevention, burn prevention, and other safety measures.</p><p><br></p><p>Cooperate with production plans to complete workpiece processing, equipment assembly, and other related production tasks.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>1. Experience in welding, metal processing, mechanical manufacturing, or related fields.</p><p>2. Proficient in one or more welding techniques, such as manual arc welding (SMAW) and gas shielded welding (MIG/MAG).</p><p>3. Able to read basic mechanical drawings, welding symbols, and process requirements, with basic dimensional recognition and quality judgment abilities.</p><p>4. Able to independently complete routine welding operations, with weld formation control, defect identification, and basic repair capabilities.</p><p>5. Possess strong quality awareness, safety awareness, and teamwork skills, able to adapt to factory production rhythm and job arrangements.</p><p>6. Candidates holding valid welder qualification certificates or relevant vocational skill certificates are preferred; If the position or project requires specific certifications, the corresponding qualification requirements must be met.</p><p>7. Physical condition must meet job requirements and be able to correctly use personal protective equipment as required.</p><p>8. Basic English communication skills required, able to communicate fluently in English;</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><ul> <li>Under general supervision, applies knowledge of Halliburton Cased Hole Wireline Technologies to independently provide basic services and tool operation to customers at the well site.</li> <li>Applies engineering, mechanical and geological principles to articulate basic data interpretations and mechanical constructs to clients from proprietary software and learns to coach clients through various drilling and completion scenarios.</li> <li>&nbsp;Actively participates in the training and development of operators and Associate Field Professionals on all aspects of job.</li> </ul> <br><br><b>Qualifications</b> <br><ul> <li>Completion of an undergraduate degree in Engineering, Science or other technical discipline is preferred or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.</li> <li>Minimum of 1 year of experience in Cased Hole Wireline field operations required.</li> </ul><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Jubail Highway Abu Hadria Exit,&nbsp;Al-Khobar,&nbsp;Al Khobar,&nbsp;31952, Saudi Arabia</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;211799&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Experienced Hire&nbsp;<br><strong>Job Family:</strong>&nbsp;Engineering/Science/Technology&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Wireline and Perforating&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 2+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<strong>Company Description</strong> AL Shareef is a growing printing and packaging company based in Riyadh, Saudi Arabia, dedicated to delivering reliable, high-quality print solutions to a wide range of clients. The company focuses on efficient production processes, consistent product quality, and timely delivery. Team members work with modern print and finishing equipment in a safety-conscious environment. AL Shareef values professionalism, continuous learning, and attention to detail, offering opportunities for skill development and career growth.<br><strong>Role Description</strong> The Die Cutting Operator is a full-time, on-site role based in Riyadh, Saudi Arabia. The role involves setting up, operating, and monitoring die-cutting machines to produce printed materials and packaging components according to job specifications. Daily tasks include reviewing work orders, preparing materials, adjusting machine settings, performing test runs, and inspecting output for accuracy, quality, and consistency. The operator is responsible for routine machine maintenance, troubleshooting minor mechanical issues, and collaborating with print production and bindery teams to ensure efficient workflow. The role also requires following safety procedures, maintaining a clean work area, and documenting production details and any issues encountered during the shift.<br><strong>Qualifications<br></strong> <br><ul><li>Experience in print production processes, including Printing and Print Production.</li><li>Skills in operating and supporting printing equipment, such as Printer Support and Inkjet systems.</li><li>Knowledge of finishing and post-press operations, including Bindery and basic die cutting techniques.</li><li>Ability to read and interpret work orders, job tickets, and technical instructions.</li><li>Strong attention to detail, quality control focus, and ability to detect defects in printed materials.</li><li>Basic mechanical aptitude for adjusting machine settings and performing routine maintenance.</li><li>Willingness to work on-site in a manufacturing environment and follow safety and housekeeping standards.</li><li>Previous experience in a printing, packaging, or related industrial setting is preferred.</li></ul>

<p><strong>Job Summary</strong></p><p>We are seeking an experienced QC Welding Inspector to monitor and ensure the quality of welding and fabrication activities at project sites across Saudi Arabia. The role involves conducting inspections in accordance with approved drawings, ITPs, welding procedures, project specifications, applicable codes, and Saudi Aramco requirements.</p><p><br></p><p><strong>Roles &amp; Responsibilities</strong></p><ul><li>Inspect welding and fabrication activities to ensure compliance with approved drawings, specifications, ITPs, WPS/PQR, and project standards.</li><li>Perform fit-up, welding, visual, dimensional, and final inspections of piping, structures, equipment, and related components.</li><li>Verify welder qualifications, welding consumables, joint preparation, preheating, interpass temperature, and welding parameters.</li><li>Review and verify WPS, PQR, welder qualification records, MTCs, and welding documentation.</li><li>Coordinate and monitor NDT activities, including RT, UT, MT, and PT, as applicable.</li><li>Identify welding defects and non-conformities and ensure appropriate NCR/corrective action and timely closure.</li><li>Maintain inspection reports, weld maps, inspection records, test reports, and QA/QC documentation.</li><li>Coordinate with construction teams, subcontractors, client representatives, and third-party inspectors during inspection activities.</li><li>Ensure compliance with Saudi Aramco standards and applicable international welding codes and specifications.</li><li>Support mechanical completion, punch-list clearance, dossier preparation, and project handover activities.</li></ul><p><br></p><p><strong>Mandatory Requirements</strong></p><ul><li>Diploma/Bachelor's Degree in Mechanical/Metallurgical Engineering or equivalent technical qualification.</li><li>6+ years of relevant experience as a QC Welding Inspector.</li><li>Minimum 6+ years of relevant Gulf experience.</li><li>Valid CBT certification, where applicable.</li><li>Valid Saudi Aramco approval or proven experience on Saudi Aramco projects.</li><li>Strong knowledge of WPS/PQR, welding inspection, ITP, NDT, QA/QC documentation, and welding codes/standards.</li><li>Knowledge of applicable Saudi Aramco project specifications and international standards.</li><li>Candidates currently available in Saudi Arabia will be given priority.</li><li>Open to candidates from India, Pakistan, Philippines, and eligible local-transfer candidates; Saudi Nationals are not eligible.</li></ul>

<p>Qualifications: Graduate of Civil or Mechanical Engineering. Minimum of 10 years experience in planning and scheduling works either construction, heavy or high technology industries. Have exposure to Project Management practices, computer capabilities, current planning and scheduling techniques, standard, methods and procedures. Oil and Gas Industrial projects with Saudi ARAMCO experience is required Certified in Primavera 8.3 or above versions. Experience in critical pathway network analysis and computer applications related to Progress Management System. Not more than 50 years old ?Job Description: Must be a confident responsibilities individual, able to perform with a minimum of supervision. Shall be able to prepare the progress reports/monthly progress reports/invoices for projects. Shall be able to prepare the monthly project report. Capable to create detailed project schedules and plans, taking into account project objectives, resources, timelines, and budget constraints. Capable to tracking project progress and identifying potential roadblocks or delays, and taking corrective action as needed. Capable identifying and analyzing project risks and developing contingency plans to mitigate those risks. Regularly communicating project status updates, milestones, and deliverables to stakeholders and team members. Certified Lead Auditor ISO 9001:2015 Can utilize computer applications, both PC and mainframe, to aid sheduling and scheduling analysis Familiar with ISO 9001, ISO 45001 and ISO 14001 standard</p><p><strong>Desired Candidate Profile</strong></p><p>Graduate of Civil or Mechanical Engineering. Minimum of 10 years experience in planning and scheduling works either construction, heavy or high technology industries. Have exposure to Project Management practices, computer capabilities, current planning and scheduling techniques, standard, methods and procedures. Oil and Gas Industrial projects with Saudi ARAMCO experience is required Certified in Primavera 8.3 or above versions. Experience in critical pathway network analysis and computer applications related to Progress Management System. Not more than 50 years old ?Certified Lead Auditor ISO 9001:2015</p>

<p>Familiarity in project execution plan, interface management, change management, construction sequencing, standards specifications and project schedule to support Department Manager in timely completion of projects Must have have a dynamic attitude towards project improvements and savings. You must be flexible to work in multinational teams and mobilize to different locations including remote areas as needed. Responsible for all day to day matters of the projects and should be able to lead project team of different disciplines. Liaison with Client/ Consultant/ Inspections agencies and coordination with other departments of the company for smooth execution of the projects Capability to train multinational work force using training tools on a regular basis Able to communicate technically with clients both orally and written communication Certified Lead Auditor ISO 9001:2015 Computer Literate Familiar with ISO 9001, ISO 45001 and ISO 14001 standard</p><p><strong>Desired Candidate Profile</strong></p><p>Graduate of Civil or Mechanical Engineering. Minimum of 10 years experience as QC Manager of Civil, Electro-Mechanical, Industrial, Piping and Pipeline Projects. Oil and Gas and ARAMCO experience is required. Certified PMP, PgMP or equivalent certification Shall have strong track record experience in project management field related to refining and petrochemical industries with a specialty in Petrochemicals, design, construction, pre-commissioning, commissioning, startup, and operation. Must have Engineering Design &amp; Construction phase experience with a thorough knowledge of engineering practices and economic principles in the applicable International Codes, Standards and Specifications, Standard International Codes of piping / coating works. Must have a mastery understanding of contract documents (inclusive of appendices, drawings and specifications. Must have a mastery understanding of international procedures of Projects Phases, Engineering Phases, Bidding procedures, Procurement Processes, Construction Requirements and up to date Best Practices. Not more than 50 years old</p>

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About the Role</h3> <p style="margin:0 0 12px; **********<strong>;">Hilton is seeking a <strong style="font-weight:700;">Maintenance Supervisor</strong> to oversee the daily operations of building and systems maintenance and repairs. This full-time position is based in Saudi Arabia and involves ensuring the functionality and safety of hotel facilities to support guest experiences. The role requires 0-1 years of experience.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Role Overview</h3> <p style="margin:0 0 12px; </strong>********<strong>;">The Maintenance Supervisor is responsible for supervising the maintenance team and ensuring that all physical building systems, mechanical, electrical, HVAC, and life safety systems are maintained in compliance with regulations. This role involves assigning tasks, overseeing contractor work, and responding to service requests to maintain the hotel's operational standards.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Supervise and develop the maintenance team, including training, scheduling, and providing guidance to ensure high-quality work.</li> <li style="margin:0 0 6px;">Support the maintenance of the physical building, mechanical, electrical, HVAC, and life safety systems, ensuring compliance with local and national regulations.</li> <li style="margin:0 0 6px;">Assign and oversee daily maintenance tasks, ensuring thorough documentation in the property management system.</li> <li style="margin:0 0 6px;">Supervise external contractors and inspect completed work for quality and compliance.</li> <li style="margin:0 0 6px;">Ensure prompt and efficient addressing of maintenance requests, guest concerns, and emergency situations.</li> <li style="margin:0 0 6px;">Conduct scheduled and ad hoc maintenance, including planned preventive maintenance (PPM) and service requests, to keep hotel fixtures and fittings in safe condition.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Qualifications and Experience</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">0-1 years of experience in a related maintenance or supervisory role.</li> <li style="margin:0 0 6px;">Ability to supervise a team and ensure adherence to maintenance standards.</li> <li style="margin:0 0 6px;">Understanding of facility safety and compliance requirements.</li> <li style="margin:0 0 6px;">Proficiency in documenting work within property management systems.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About Hilton</h3> <p style="margin:0 0 12px; </strong>********<strong>;">Hilton is a global leader in hospitality, recognized for its workplace culture and commitment to guest experiences. The company focuses on building a supportive environment for its Team Members and setting standards for the future of travel.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Application Process</h3> <p style="margin:0 0 12px; </strong>**********;">Candidates interested in this Maintenance Supervisor position are encouraged to apply to join the Hilton team in Saudi Arabia.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><ul> <li>Under general supervision, applies knowledge of Halliburton Cased Hole Wireline Technologies to independently provide basic services and tool operation to customers at the well site.</li> <li>Applies engineering, mechanical and geological principles to articulate basic data interpretations and mechanical constructs to clients from proprietary software and learns to coach clients through various drilling and completion scenarios.</li> <li>Actively participates in the training and development of operators and Associate Field Professionals on all aspects of job.&nbsp;</li> </ul><br><br><b>Qualifications</b> <br><ul> <li>Completion of an undergraduate degree in Engineering, Science or other technical discipline is preferred or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.</li> <li>Minimum of 1 year of experience in Cased Hole Wireline field operations required.</li> </ul><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Jubail Highway Abu Hadria Exit,&nbsp;Al-Khobar,&nbsp;Al Khobar,&nbsp;31952, Saudi Arabia</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;211375&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Experienced Hire&nbsp;<br><strong>Job Family:</strong>&nbsp;Engineering/Science/Technology&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Wireline and Perforating&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 2+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>