Planning Engineer Jobs in Saudi

<h3 >About the Role</h3> <p >Si-Ware Systems is seeking a <strong >MEMS Development Engineer</strong> to join its team in Riyadh, Saudi Arabia. This full-time position is critical for the development of the MEMS chip, which forms the core component of Si-Ware's MEMS-based products. The role spans the full development lifecycle, from initial design and modeling through fabrication support, wafer-level testing, and detailed failure analysis. Candidates should possess 5-10 years of relevant experience.</p> <h3 >Design and Development Responsibilities</h3> <ul > <li >Contribute to MEMS design and development activities, including system-level design and parameter/specification extraction.</li> <li >Perform MEMS modeling using analytical and numerical techniques, including FEM-based simulation as needed.</li> <li >Create and refine layouts using L-Edit and other layout tools.</li> <li >Contribute to MEMS tapeouts.</li> <li >Develop platforms and tools for MEMS data processing and manipulation.</li> </ul> <h3 >Characterization, Testing, and Failure Analysis</h3> <ul > <li >Perform wafer-level and die-level testing and characterization of fabricated MEMS devices.</li> <li >Carry out electrical characterization using lab instrumentation such as impedance analyzers to extract key device parameters.</li> <li >Use lab imaging and inspection tools, including optical microscopy and related metrology equipment, for physical and structural analysis of dies.</li> <li >Support the setup and operation of bench characterization stations for evaluating MEMS performance.</li> <li >Assist in failure analysis activities to help identify root causes of performance and yield issues.</li> <li >Investigate MEMS performance issues and contribute to solutions that enhance and stabilize chip performance.</li> <li >Provide up-to-date reporting on MEMS performance status.</li> </ul> <h3 >Collaboration and Coordination</h3> <ul > <li >Serve as the technical interface with the MEMS foundry supplying the MEMS chips.</li> <li >Work closely with cross-functional teams throughout the development process.</li> <li >Communicate technical status and progress to project managers.</li> <li >Coordinate with suppliers and support procurement and purchasing activities.</li> </ul> <h3 >Required Qualifications</h3> <ul > <li ><strong >Education:</strong> A Bachelor's (BSc) or Master's (MSc) degree in Electrical, Mechanical, Mechatronics Engineering, or a strictly related engineering discipline.</li> <li ><strong >Professional Membership:</strong> Mandatory Engineer membership in the Saudi Council of Engineers (Engineer Grade category).</li> </ul>

We are looking for a motivated Engineer II – Planning to join our Project Controls team. The successful candidate will support planning, scheduling, and progress monitoring activities across major infrastructure projects while ensuring accurate reporting and effective schedule control throughout the project lifecycle.<br>Key Responsibilities Develop and update detailed project schedules using Primavera P6. Assist in preparing baseline schedules, WBS, activity sequencing, and resource loading. Update project progress, monitor schedule performance, and identify deviations. Prepare weekly, bi-weekly, and monthly look-ahead schedules. Develop progress reports, S-Curves, dashboards, KPI reports, and resource histograms. Coordinate with Engineering, Procurement, Construction, QA/QC, and Site teams to collect progress updates. Support delay analysis, Time Impact Analysis (TIA), and Extension of Time (EOT) documentation. Assist in forecasting, resource planning, and schedule recovery activities. Monitor manpower and equipment productivity against planned targets. Ensure planning data is accurate and aligned with project requirements.<br>Requirements Bachelor's Degree in Civil Engineering or a related engineering discipline.4–6 years of experience in Planning & Scheduling. Proven experience working on Infrastructure Projects. Previous experience with a Main Contractor is required. Hands-on experience with Primavera P6. Good understanding of:CPMProject Controls Progress Monitoring Delay Analysis TIAEOTResource Loading S-Curves KPI Reporting Strong Microsoft Excel skills. Experience with Power BI is preferred. PMP certification is a plus.<br>Preferred Experience Candidates with experience in major infrastructure or giga projects such as roads, bridges, utilities, water networks, sewer networks, metro, airports, or similar large-scale projects will be highly preferred.

<h3 >About House of Consulting Office</h3> <p >House of Consulting Office for Consulting Engineers Co. (HCO) is a leading multidisciplinary consulting engineering firm in Saudi Arabia. HCO provides integrated architectural, engineering, planning, and project management consultancy services, delivering comprehensive solutions that support clients throughout the entire project lifecycle.</p> <h3 >Role Overview: Structural Engineer</h3> <p >We are currently seeking an experienced <strong >Structural Engineer</strong> to join our team. This full-time role involves the supervision of structural construction works and ensuring compliance with approved designs and specifications across all project phases. The successful candidate will play a key role in the delivery of high-quality engineering solutions.</p> <h3 >Key Responsibilities</h3> <ul > <li >Supervise structural construction works throughout all project phases.</li> <li >Review structural drawings, shop drawings, reinforcement details, and material submittals.</li> <li >Monitor concrete, steel, and structural installations.</li> <li >Conduct structural inspections to ensure compliance with approved designs and specifications.</li> <li >Coordinate with contractors, consultants, and project teams.</li> <li >Resolve structural technical issues during construction.</li> <li >Monitor quality control procedures and structural testing.</li> <li >Prepare inspection reports and technical documentation.</li> <li >Ensure compliance with safety standards and project requirements.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Bachelor's Degree in Civil or Structural Engineering.</li> <li >A minimum of <strong >5 to 10 years</strong> of relevant experience in structural engineering.</li> <li >Previous <strong >PMC (Project Management Consultancy) experience is mandatory</strong>.</li> </ul> <h3 >Work Location and Type</h3> <p >This is a full-time position located in AlUla, within the Al Har Al Ulya region of Al Madinah, Saudi Arabia (Medina). The role requires a dedicated presence on-site to effectively manage and supervise structural works.</p> <h3 >Application Information</h3> <p >House of Consulting Office invites qualified candidates who meet the specified requirements to apply for this Structural Engineer position. We look forward to reviewing your application.</p>

Position Summary The Lead Instrumentation & Control (I&C) Commissioning Engineer represents the Owner during the commissioning phase of a utility-scale Combined Cycle Gas Turbine (CCGT) Power Plant. The role is responsible for providing technical oversight of the EPC Contractor’s Instrumentation & Control commissioning activities, ensuring all work is executed safely, in accordance with the EPC Contract, Owner’s Technical Specifications (OTS), OEM recommendations, project procedures, and applicable international standards.<br>The position focuses on field instrumentation, package control systems, PLCs, Safety Instrumented Systems (SIS), Fire & Gas Systems (F&G), and associated interfaces. The role works closely with the Lead DCS Commissioning Engineer, who has primary responsibility for oversight of the Distributed Control System (DCS), including system architecture, software configuration, networking, and overall control system functionality.<br>The Lead I&C Commissioning Engineer provides technical leadership, identifies commissioning risks, monitors EPC performance, witnesses critical commissioning activities, and supports the successful achievement of project milestones through to Commercial Operation Date (COD).<br>Key Responsibilities Commissioning Oversight Provide technical oversight of the EPC Contractor’s Instrumentation & Control commissioning activities. Monitor commissioning progress to ensure compliance with approved procedures, project schedule, and contractual requirements. Verify commissioning activities are carried out in accordance with the Owner’s Technical Specifications (OTS), EPC Contract, OEM recommendations, and applicable international standards. Witness critical commissioning activities and provide technical recommendations for Owner acceptance. Identify technical risks and recommend mitigation measures to the Commissioning Manager. Monitor EPC Contractor performance and raise concerns regarding quality, safety, schedule, or technical compliance.<br>Engineering & Documentation Review Review and provide technical comments on the EPC Contractor’s:Commissioning Procedures Method Statements Commissioning Schedules Functional Test Procedures Loop Check Procedures Cause & Effect Test Procedures Startup Procedures SAT Documentation Turnover Packages Commissioning Reports Red-Line Drawings As-Built Documentation. Ensure all documentation complies with project requirements before commissioning activities commence.<br>Field Instrumentation Provide technical oversight of commissioning activities related to:Pressure Instruments Temperature Instruments Flow Instruments Level Instruments Analytical Instruments Smart Field Devices Control Valves Motor Operated Valves (MOVs) On-Off Valves Instrument Air Systems Sampling Systems Instrument Calibration Instrument Reinstatement Loop Checking Field Verification Ensure commissioning activities are completed in accordance with approved procedures and project specifications.<br>Package Control Systems Oversee commissioning of package-mounted PLC and local control systems, including but not limited to:Water Treatment Plant Fuel Gas System Air Compressors Fire Protection Systems HVAC Systems Chemical Dosing Systems Diesel Generator Controls Auxiliary Boilers (where applicable) Balance of Plant Packages Verify successful integration between package control systems and the plant DCS.<br>Functional Testing Witness and monitor:Loop Checks Functional Testing Interlock Testing Permissive Testing Cause & Effect Testing Sequence Testing Valve Stroke Testing Instrument Functional Testing Package Interface Testing Integrated System Testing Coordinate closely with the Lead DCS Commissioning Engineer during integrated testing activities.<br>Safety Instrumented Systems (SIS) & Fire & Gas (F&G) Provide technical oversight of:SIS Field Devices Fire & Gas Detection Devices Functional Testing Proof Testing Interface Testing Final Acceptance Testing Ensure compliance with Functional Safety requirements and project specifications.<br>Mechanical Completion & System Turnover Participate in Mechanical Completion inspections. Support Ready for Commissioning (RFC) verification. Participate in system walkdowns. Monitor I&C punch list close-out. Review turnover dossiers. Support System Completion (ECC/TOP) activities. Verify system readiness for Owner acceptance.<br>Startup & Performance Testing Monitor and witness EPC Contractor activities during:Cold Commissioning Hot Commissioning First Energization First Fire First Synchronization Load Rejection Tests Reliability Run Performance Testing Commercial Operation Readiness Provide technical recommendations to the Commissioning Manager regarding system readiness and acceptance.<br>Interface Management Coordinate closely with:Lead DCS Commissioning Engineer Lead Electrical Commissioning Engineer Lead Mechanical Commissioning Engineer Construction Team Engineering Team Quality Team HSE Team Planning & Controls Manager System Completion (ECC/TOP) Team EPC Contractor OEM Representatives Owner’s Engineer LOTO Coordinator. Ensure effective coordination across all commissioning disciplines.<br>Reporting Monitor commissioning progress against the approved schedule. Identify technical issues affecting commissioning progress. Report commissioning risks and recommend mitigation measures. Review of EPC commissioning reports. Prepare Owner observations and recommendations. Support weekly and monthly commissioning progress reporting.<br>Health, Safety & Quality Promote a Zero Harm safety culture. Ensure compliance with project HSE requirements. Verify commissioning activities are conducted under approved Permit-to-Work (PTW) and Lock Out/Tag Out (LOTO) procedures. Ensure compliance with project Quality Management requirements. Promote safe commissioning practices throughout all project phases.<br>Qualifications Bachelor’s Degree in Instrumentation Engineering, Control Engineering, Electrical Engineering, Electronics Engineering, or an equivalent engineering discipline from a recognized university. Professional Engineer (PE), Chartered Engineer (CEng), or equivalent professional registration is desirable. Certification or formal training in Functional Safety (IEC 61511), ISA, or equivalent is considered an advantage. Excellent written and verbal communication skills in English.<br>Experience Minimum 12 years of direct Instrumentation & Control commissioning experience in utility-scale Combined Cycle Gas Turbine (CCGT) power plants. Minimum 5 years of experience as a Lead I&C Commissioning Engineer or in a comparable senior commissioning leadership role. Proven experience in commissioning at least two utility-scale Combined Cycle Power Plants, including one project with an installed capacity of 1,900 MW or greater. Demonstrated experience across the full commissioning lifecycle, including:Construction Support Mechanical Completion Pre-Commissioning Commissioning First Fire First Synchronization Reliability Run Performance Testing Commercial Operation (COD) Previous experience representing the Owner, Owner’s Engineer, or EPC Contractor on major power generation projects. Demonstrated experience in overseeing EPC Contractor commissioning activities and coordinating with OEMs and package vendors. Strong experience with System Completion processes, including Mechanical Completion, Ready for Commissioning (RFC), ECC/TOP, Turnover, and Handover.<br>Technical Competencies Demonstrated experience with:Field Instrumentation Instrument Calibration Loop Checking Smart Instruments Control Valves Motor Operated Valves (MOVs) Instrument Air Systems Package PLC Systems Safety Instrumented Systems (SIS) Fire & Gas Systems (F&G) Turbine Package Interfaces HRSG Instrumentation Balance of Plant Instrumentation Communication Protocols (Modbus, Profibus, Foundation Fieldbus, HART, Ethernet/IP or equivalent) Functional Testing Cause & Effect Verification Interlock Testing System Integration Testing Commissioning Documentation System Turnover and Handover<br>Knowledge Sound knowledge of:Combined Cycle Power Plant systems and operation Commissioning management principles EPC Contract Execution Owner’s Technical Specifications (OTS) OEM commissioning requirements IEC Standards ISA Standards IEEE Standards (as applicable) Functional Safety (IEC 61511) Quality Management Systems (ISO 9001) HSE Management Systems Permit-to-Work (PTW) Lock Out/Tag Out (LOTO)<br>Key Competencies Technical Leadership Commissioning Management Planning and Organizing Analytical Thinking Problem Solving Decision Making Communication and Presentation Skills Stakeholder Management Teamwork and Collaboration Negotiation and Conflict Resolution Attention to Detail Safety Leadership Quality Focus Results Orientation<br>Key Performance Indicators (KPIs) Zero Lost Time Incidents (LTI) are attributable to I&C commissioning activities. I&C commissioning activities completed in accordance with the approved project schedule. Successful completion of all loop checks, functional tests, and integrated system tests. Timely closure of I&C punch list items. Successful completion of startup, synchronization, reliability run, and performance testing milestones. Timely completion of System Completion (ECC/TOP) and Owner handover activities. Effective oversight of EPC Contractor commissioning performance. Timely identification and mitigation of commissioning risks. High-quality commissioning documentation and turnover packages. Positive collaboration with internal stakeholders, EPC Contractor, OEMs, and Owner’s Engineer.

Position Summary The Lead Instrumentation & Control (I&C) Commissioning Engineer represents the Owner during the commissioning phase of a utility-scale Combined Cycle Gas Turbine (CCGT) Power Plant. The role is responsible for providing technical oversight of the EPC Contractor’s Instrumentation & Control commissioning activities, ensuring all work is executed safely, in accordance with the EPC Contract, Owner’s Technical Specifications (OTS), OEM recommendations, project procedures, and applicable international standards.<br>The position focuses on field instrumentation, package control systems, PLCs, Safety Instrumented Systems (SIS), Fire & Gas Systems (F&G), and associated interfaces. The role works closely with the Lead DCS Commissioning Engineer, who has primary responsibility for oversight of the Distributed Control System (DCS), including system architecture, software configuration, networking, and overall control system functionality.<br>The Lead I&C Commissioning Engineer provides technical leadership, identifies commissioning risks, monitors EPC performance, witnesses critical commissioning activities, and supports the successful achievement of project milestones through to Commercial Operation Date (COD).<br>Key Responsibilities Commissioning Oversight Provide technical oversight of the EPC Contractor’s Instrumentation & Control commissioning activities. Monitor commissioning progress to ensure compliance with approved procedures, project schedule, and contractual requirements. Verify commissioning activities are carried out in accordance with the Owner’s Technical Specifications (OTS), EPC Contract, OEM recommendations, and applicable international standards. Witness critical commissioning activities and provide technical recommendations for Owner acceptance. Identify technical risks and recommend mitigation measures to the Commissioning Manager. Monitor EPC Contractor performance and raise concerns regarding quality, safety, schedule, or technical compliance.<br>Engineering & Documentation Review Review and provide technical comments on the EPC Contractor’s:Commissioning Procedures Method Statements Commissioning Schedules Functional Test Procedures Loop Check Procedures Cause & Effect Test Procedures Startup Procedures SAT Documentation Turnover Packages Commissioning Reports Red-Line Drawings As-Built Documentation. Ensure all documentation complies with project requirements before commissioning activities commence.<br>Field Instrumentation Provide technical oversight of commissioning activities related to:Pressure Instruments Temperature Instruments Flow Instruments Level Instruments Analytical Instruments Smart Field Devices Control Valves Motor Operated Valves (MOVs) On-Off Valves Instrument Air Systems Sampling Systems Instrument Calibration Instrument Reinstatement Loop Checking Field Verification Ensure commissioning activities are completed in accordance with approved procedures and project specifications.<br>Package Control Systems Oversee commissioning of package-mounted PLC and local control systems, including but not limited to:Water Treatment Plant Fuel Gas System Air Compressors Fire Protection Systems HVAC Systems Chemical Dosing Systems Diesel Generator Controls Auxiliary Boilers (where applicable) Balance of Plant Packages Verify successful integration between package control systems and the plant DCS.<br>Functional Testing Witness and monitor:Loop Checks Functional Testing Interlock Testing Permissive Testing Cause & Effect Testing Sequence Testing Valve Stroke Testing Instrument Functional Testing Package Interface Testing Integrated System Testing Coordinate closely with the Lead DCS Commissioning Engineer during integrated testing activities.<br>Safety Instrumented Systems (SIS) & Fire & Gas (F&G) Provide technical oversight of:SIS Field Devices Fire & Gas Detection Devices Functional Testing Proof Testing Interface Testing Final Acceptance Testing Ensure compliance with Functional Safety requirements and project specifications.<br>Mechanical Completion & System Turnover Participate in Mechanical Completion inspections. Support Ready for Commissioning (RFC) verification. Participate in system walkdowns. Monitor I&C punch list close-out. Review turnover dossiers. Support System Completion (ECC/TOP) activities. Verify system readiness for Owner acceptance.<br>Startup & Performance Testing Monitor and witness EPC Contractor activities during:Cold Commissioning Hot Commissioning First Energization First Fire First Synchronization Load Rejection Tests Reliability Run Performance Testing Commercial Operation Readiness Provide technical recommendations to the Commissioning Manager regarding system readiness and acceptance.<br>Interface Management Coordinate closely with:Lead DCS Commissioning Engineer Lead Electrical Commissioning Engineer Lead Mechanical Commissioning Engineer Construction Team Engineering Team Quality Team HSE Team Planning & Controls Manager System Completion (ECC/TOP) Team EPC Contractor OEM Representatives Owner’s Engineer LOTO Coordinator. Ensure effective coordination across all commissioning disciplines.<br>Reporting Monitor commissioning progress against the approved schedule. Identify technical issues affecting commissioning progress. Report commissioning risks and recommend mitigation measures. Review of EPC commissioning reports. Prepare Owner observations and recommendations. Support weekly and monthly commissioning progress reporting.<br>Health, Safety & Quality Promote a Zero Harm safety culture. Ensure compliance with project HSE requirements. Verify commissioning activities are conducted under approved Permit-to-Work (PTW) and Lock Out/Tag Out (LOTO) procedures. Ensure compliance with project Quality Management requirements. Promote safe commissioning practices throughout all project phases.<br>Qualifications Bachelor’s Degree in Instrumentation Engineering, Control Engineering, Electrical Engineering, Electronics Engineering, or an equivalent engineering discipline from a recognized university. Professional Engineer (PE), Chartered Engineer (CEng), or equivalent professional registration is desirable. Certification or formal training in Functional Safety (IEC 61511), ISA, or equivalent is considered an advantage. Excellent written and verbal communication skills in English.<br>Experience Minimum 12 years of direct Instrumentation & Control commissioning experience in utility-scale Combined Cycle Gas Turbine (CCGT) power plants. Minimum 5 years of experience as a Lead I&C Commissioning Engineer or in a comparable senior commissioning leadership role. Proven experience in commissioning at least two utility-scale Combined Cycle Power Plants, including one project with an installed capacity of 1,900 MW or greater. Demonstrated experience across the full commissioning lifecycle, including:Construction Support Mechanical Completion Pre-Commissioning Commissioning First Fire First Synchronization Reliability Run Performance Testing Commercial Operation (COD) Previous experience representing the Owner, Owner’s Engineer, or EPC Contractor on major power generation projects. Demonstrated experience in overseeing EPC Contractor commissioning activities and coordinating with OEMs and package vendors. Strong experience with System Completion processes, including Mechanical Completion, Ready for Commissioning (RFC), ECC/TOP, Turnover, and Handover.<br>Technical Competencies Demonstrated experience with:Field Instrumentation Instrument Calibration Loop Checking Smart Instruments Control Valves Motor Operated Valves (MOVs) Instrument Air Systems Package PLC Systems Safety Instrumented Systems (SIS) Fire & Gas Systems (F&G) Turbine Package Interfaces HRSG Instrumentation Balance of Plant Instrumentation Communication Protocols (Modbus, Profibus, Foundation Fieldbus, HART, Ethernet/IP or equivalent) Functional Testing Cause & Effect Verification Interlock Testing System Integration Testing Commissioning Documentation System Turnover and Handover<br>Knowledge Sound knowledge of:Combined Cycle Power Plant systems and operation Commissioning management principles EPC Contract Execution Owner’s Technical Specifications (OTS) OEM commissioning requirements IEC Standards ISA Standards IEEE Standards (as applicable) Functional Safety (IEC 61511) Quality Management Systems (ISO 9001) HSE Management Systems Permit-to-Work (PTW) Lock Out/Tag Out (LOTO)<br>Key Competencies Technical Leadership Commissioning Management Planning and Organizing Analytical Thinking Problem Solving Decision Making Communication and Presentation Skills Stakeholder Management Teamwork and Collaboration Negotiation and Conflict Resolution Attention to Detail Safety Leadership Quality Focus Results Orientation<br>Key Performance Indicators (KPIs) Zero Lost Time Incidents (LTI) are attributable to I&C commissioning activities. I&C commissioning activities completed in accordance with the approved project schedule. Successful completion of all loop checks, functional tests, and integrated system tests. Timely closure of I&C punch list items. Successful completion of startup, synchronization, reliability run, and performance testing milestones. Timely completion of System Completion (ECC/TOP) and Owner handover activities. Effective oversight of EPC Contractor commissioning performance. Timely identification and mitigation of commissioning risks. High-quality commissioning documentation and turnover packages. Positive collaboration with internal stakeholders, EPC Contractor, OEMs, and Owner’s Engineer.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>1. JOB DETAILS:</strong></p><br> <p><strong>Position Title:</strong> Engineer</p><br> <p><strong>Broad Band:</strong> M09: Professional</p><br> <p><strong>Talent Pipeline Layer:</strong> Managing Self Technical/Professional</p><br> <p><strong>2. OVERALL JOB PURPOSE:</strong></p><br> <p>Technology application within an engineering discipline, and/or a supporting role within area of expertise/or portfolio of projects. (Operating level: Execution)</p><br> <p><strong>3. QUALIFICATIONS, EXPERIENCE &amp; SKILLS:</strong></p><br> <p><strong>Qualification: </strong></p><br> <p>1. Bachelors of Engineering (Specific discipline) + 2 years as Trainee Engineer <br> 2. Masters of Engineering (Specific discipline) + min 6 months as Trainee Engineer</p><br> <p><strong>Experience: </strong></p><br> <p>1. 4 years relevant experience (subject to qualification)</p><br> <p><strong>Skills: </strong></p><br> <p>1. Analysis and modelling of engineering components, systems, processes <br> 2. System/Process optimisation <br> 3. Risk Management/Analysis <br> 4. Conceptualising engineering components, systems <br> 5. Able to independently manage own work planning and delivery according to targets; proven application <br> 6. Technical interpretation and application of industry knowledge and expertise <br> 7. Effective verball and written communication skills <br> 8. Sound analytical and problem solving skills <br> 9. Entrepreneurial and commercial thinking <br> 10. Competent in managing projects <br> 11. Ability to cope with pressures and setbacks <br> 12. Ability to follow instructions and procedures <br> 13. Good persuading and influencing skills <br> 14. Ability to think and interact globally <br> 15. Ability to adapt and respond to change <br> 16 . Beginner, presentation and negotiation skills</p><br> <p><strong>4. KEY ACCOUNTABILITIES:</strong></p><br> <p><strong>Focus Area</strong></p><br> <p>Get results through individual contribution, effort and self management</p><br> <p><strong>Operational / Functional</strong></p><br> <p>1. Consistently delivers on all service level agreements <br> 2. Quality results through cost effective service and on time support <br> 3. Cost awareness and control <br> 4. technical expertise and advice <br> 5. technical/operating systems and models <br> 6. HSE targets</p><br> <p>7. Participate in solving problems within a team context involving multiple stakeholders <br> 8. Identify stakeholder needs to set specific technical requirements (with guidance) <br> 9. Independent idea generation within team context (operational impact) <br> 10. Analyse work processes and implement actions to improve own technical performance <br> 11. Conform to quality standards, specifications and technical requirements <br> 12. Demonstrae understanding of own function's quality standards <br> 13. Contribute to decisions and/or carry out tasks which optimise total cost of ownership <br> 14. Balance cost, schedule, quality as per risk level (with guidance) <br> 15. Providing</p><br> <p><strong>Leadership</strong></p><br> <p>1. Understand, support and live the Ma'aden vision, values and goals <br> 2. Takes accountability for personal improvement, personal development, skills development and effectiveness <br> 3. Supports and articulate personal goals that are aligned to the business direction, that lead to personal development and effectiveness; Continuously strives to improve personal mastery, professional growth and business skills (ensuring technical/professional development in specialist area) <br> 4. Establish professional standards for work, project plans and organization to ensure service provision and effective individual contribution <br> 5. Share expertise freely and often during the application/review of policies, practices, standards, procedures and methods <br> 6. Conduct analysis to formulate recommendations and design solutions and implement them effectively, problem solving and decisions quality - Analysed, formulated recommendations, designed solutions and implemented them effectively <br> 7. Progress monitoring, reporting and corrective action. <br> 8. Statutory compliance and professional practices.</p><br> <p>9. Act as coach and mentor within team <br> 10. Ensuring continous personal and professionsl growth and development <br> 11. Facilitating transformation and change in respect to procedures <br> 12. Facilitating continous improvement <br> 13. Continously communicate technical and professional concepts and developments to customers</p><br> <p><strong>Relationships</strong></p><br> <p>1. Build constructive working relationships with manager, peers, clients and other service providers (all stakeholders) to ensure effective stakeholder relationships <br> 2. Supports peers/team members to achieve team objectives through knowledge sharing, networking and collaboration with colleagues and other teams <br> 3. Maintain Manager and peer relationships marked by professional communication, behaviour and actions that results in high levels of credibility, trust and respect throughout the business unit or function <br> 4. Consistently meet customer and business requirements through technical/professional communication <br> 5. Puts forward new ideas, thinking and approaches adopted and supported by the business</p><br> <p>6. Build credibility and constructive working relationship with multi-disciplinary project teams <br> 7. Create and maintained well developed internal network <br></p><br> <p><strong>5. COMPETENCIES:</strong></p><br> <p><strong>Technical/Functional</strong></p><br> <p>1. Sufficient working knowledge of relevant technical procedures, specifications and legal frameworks <br> 2. Proficient knowledge of applicable engineering technologies <br> 3. Aware of application of appropriate technologies <br> 4. Proficient technical analysis and problem solving <br> 5. Proficient capability implementing technical solutions <br> 6. General knowledge of system/process optimisation <br> 7. General working knowledge of engineering design <br> 8. General know-how to develop innovative technical solutions <br> 9. Sufficient understanding of business processes and value chain in order to defend own value addition <br> 10. Ability to challenge cost and schedule in resepect to required quality standards <br> 11. Sound kknowledge of company standards, procedures and methods</p><br> <p><strong>Leadership</strong></p><br> <p>• Developing self <br> • Embrace digitalisation within the function <br> • Networking and collaboration</p><br> <p>1. Ability to transfer knowledge within own team</p><br> <p><strong>Safety</strong></p><br> <p>• Safety advocate - anywhere and everywhere <br> • Advanced awareness and understanding of HSE rules and procedures <br> • Concern for own wellbeing and that of others <br> • Ability to pro-actively identifying safety hazards and act accordingly</p><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

We are currently looking for a Supplier Industrialization Quality Engineer to join a leading industrial company in Saudi Arabia, based in Riyadh or Dammam.<br>The role focuses on working directly with suppliers to improve quality, manufacturing efficiency, capacity and cost performance, while ensuring suppliers are ready for new products and increased production volumes.<br>Key responsibilities:Conduct supplier quality, manufacturing process and VDA 6.3 audits Assess supplier capacity, processes, equipment and production readiness Identify bottlenecks and drive corrective and continuous improvement actions Support suppliers in improving CP/CPK, cycle time, yield and quality performance Lead supplier quality problem-solving and improvement initiatives Review PFMEA, control plans, process flows and work instructions Support APQP, PPAP and First Article Inspection activities Support new product introduction, ramp-up, volume increases and localization projects Work closely with Quality, Purchasing, R&D, Manufacturing and Logistics teams Provide technical guidance and training to suppliers on Lean, Six Sigma, process control and mistake-proofing<br>What we are looking for:Engineering degree, ideally Mechanical, Production, Automotive or Electrical7+ years of experience in manufacturing or supplier engineering Strong experience working directly with suppliers on quality improvement and industrialization Experience in automotive, industrial, consumer or electronics manufacturing. Elevator experience is a plus Strong knowledge of APQP, PPAP, PFMEA, Control Plans and 8DExperience with VDA 6.3, Lean Manufacturing and/or Six Sigma Knowledge of capacity analysis, time studies and line balancing Strong problem-solving and communication skills Willingness to travel extensively to supplier sites, approximately 15 days per month<br>This is a hands-on, supplier-facing position for someone who enjoys working directly with manufacturing teams and driving measurable improvements on the factory floor.<br>Location: Riyadh or Dammam, Saudi Arabia<br>#Hiring #Saudi Arabia #Riyadh #Dammam #Supplier Quality #Supplier Development #Industrialization #Quality Engineering #Manufacturing #Engineering #Automotive #Industrial Engineering

Join our team and contribute to the successful delivery of landmark residential and commercial construction projects across Riyadh. We are looking for a proactive Senior Planning Engineer with strong experience in project scheduling, progress monitoring, project controls, and stakeholder coordination within fast-paced building environments. Key Responsibilities:Develop, update, and monitor baseline and detailed project schedules using Primavera P6. Track project progress and analyze schedule performance against approved milestones. Coordinate with design, procurement, and construction teams to ensure alignment with project timelines. Identify potential delays and develop recovery plans to maintain project objectives. Prepare weekly and monthly progress reports, dashboards, and management presentations. Perform critical path analysis, productivity assessments, and delay evaluations. Review subcontractor schedules and support project teams in achieving planned targets. Requirements:✔ Bachelor's Degree in Engineering or a related field✔ 7+ years of planning experience in residential and commercial construction projects✔ Strong proficiency in Primavera P6 and Microsoft Excel✔ Experience in project controls, progress measurement, and reporting✔ Excellent analytical, communication, and coordination skills✔ Ability to manage multiple stakeholders and project priorities???? Location: Riyadh, Saudi Arabia If you have a proven track record in delivering high-rise residential, mixed-use, commercial, or hospitality developments, we'd love to hear from you.

Company Description WMI - Westeel Metal Industries LLC specializes in high-quality steel products engineered for a wide range of industrial applications. The company combines precision fabrication and expert welding with superior materials to deliver durable and reliable steel solutions. Clients benefit from tailor-made products designed to meet specific technical and operational requirements. With a strong legacy in steelworks and a commitment to excellence, Westeel Metal Industries focuses on long-lasting performance and customer satisfaction. Team members contribute to projects that emphasize quality, safety, and continuous improvement in steel manufacturing.<br>Role Description The Steel Structure Production Engineer is a full-time, on-site role based in Dammam. The role involves planning, organizing, and supervising the production of steel structures to meet project specifications, timelines, and quality standards. Daily tasks include reviewing technical drawings, coordinating with design and fabrication teams, optimizing production processes, and monitoring workflow on the shop floor. The engineer oversees quality checks, ensures compliance with safety and industry standards, and resolves production issues using analytical and problem-solving skills. The role also requires close collaboration with supervisors, technicians, and management to report progress, support cost-effective operations, and implement continuous improvement initiatives.<br>Qualifications Candidates should possess strong Production Engineering skills, including knowledge of steel structure fabrication processes and industrial manufacturing practices. Candidates should possess Analytical Skills and problem-solving abilities to diagnose production issues, improve efficiency, and support data-driven decisions. Candidates should possess Production Planning capabilities, including scheduling, resource allocation, and workflow optimization for multiple concurrent projects. Candidates should possess Quality Control skills to ensure adherence to specifications, standards, and inspection procedures for welded and fabricated steel structures. Candidates should possess effective Communication skills for coordinating with cross-functional teams, preparing reports, and interacting with clients and stakeholders. Bachelor’s degree in Mechanical Engineering, Structural Engineering, or a related field is preferred. Experience in steel fabrication, welding environments, or structural manufacturing is highly beneficial. Familiarity with engineering drawings, CAD tools, and relevant safety and industry standards is an advantage. Ability to work on-site in Dammam, manage deadlines, and contribute to a safe and inclusive workplace.

Job Description<br><br>We are seeking an experienced Civil Engineer with specialized airport project experience to join our team in Jeddah, Saudi Arabia.<br><br>The Civil Engineer will provide technical expertise, design review, construction supervision, quality assurance, and multidisciplinary coordination as part of the PMC team delivering airport infrastructure and building-related projects.<br><br>The role will focus on the planning, review, and supervision of airside civil works, including aircraft aprons, pavements, taxiway interfaces, internal roads, earthworks, drainage systems, site investigations, borehole surveys, topographical surveys, GPR scanning, utility coordination, and civil works associated with airport buildings and facilities.<br><br>The successful candidate will ensure that all design and construction activities are executed in accordance with project requirements, approved drawings, technical specifications, and applicable industry standards, including ICAO, GACAR, FAA, Saudi Building Code, and relevant international engineering standards. The role requires close collaboration with contractors, consultants, airport operations, and multidisciplinary engineering teams to ensure the safe, efficient, and compliant delivery of airport infrastructure projects.<br><br> <br><br>Key Responsibilities<br><br>Review and supervise the design and construction of aircraft aprons, taxiways, airside pavements, service roads, and airport infrastructure. Oversee pavement engineering activities including rigid, flexible, heavy-duty, and aircraft stand pavements, ensuring compliance with applicable standards and specifications. Monitor earthworks, grading, excavation, compaction, drainage, and roadworks within operational airport environments. Review and coordinate geotechnical investigations, borehole surveys, topographical surveys, and GPR scanning activities. Assess survey data, geotechnical reports, pavement designs, utility investigations, and construction methodologies. Coordinate interfaces with AGL, drainage, utilities, fuel hydrant, ICT/CNS, electrical, structural, architectural, and MEP systems. Conduct design reviews at Concept, Schematic, Detailed Design, Tender, and IFC stages. Review technical submissions including RFIs, shop drawings, material submittals, method statements, ITPs, NCRs, and as-built documentation. Perform site inspections and monitor contractor performance, workmanship, quality control, testing, and compliance with approved designs. Support PMC and project management teams through technical reporting, issue resolution, stakeholder coordination, and progress monitoring. <br><br><br>Qualifications<br><br>Requirements<br><br>Bachelor's Degree in Civil Engineering (Professional Engineering certification preferred). 9+ years of Civil Engineering experience. Minimum 3 years of airport, aviation, or airside infrastructure project experience preferred. Proven experience in:Airside civil works and aircraft pavements Airport roads and infrastructure Earthworks and grading Geotechnical investigations and boreholes Topographical surveys and GPR scanning Design review and construction supervision QA/QC, testing, inspections, and technical documentation<br><br> <br><br>Strong knowledge of airport standards including ICAO Annex 14, GACAR, FAA Advisory Circulars, ASTM, AASHTO, and Saudi Building Code. Proficiency in Auto CAD and Microsoft Office; BIM/CDE/EDMS experience is an advantage. Excellent technical, communication, and stakeholder management skills. Preferred Background<br><br>Experience in PMC, consultancy, or client-side supervision roles. Familiarity with working in operational airport environments, managing airside constraints, phased construction activities, and safety-critical infrastructure. What You'll Bring<br><br>Strong technical knowledge of airport civil infrastructure and pavement engineering. Ability to identify design, constructability, and operational risks early. Experience coordinating multidisciplinary engineering teams and contractors. Commitment to quality, safety, technical compliance, and successful project delivery.

Greenland Group. is looking for Maintenance Engineer (NADEC Company, Saudi Arabia)ob Description / Responsibility Candidates having hands on experience in Red Meat/ Beef Production house will get preference Manage engineering projects, utilities, equipment installation and facility upgrades. Support refrigeration, wastewater, boilers, compressed air and production equipment. Ensure engineering standards, safety and regulatory compliance. Coordinate contractors, budgets, technical documentation and commissioning. Scheduling/planning experience in meat processing, slaughterhouse, food manufacturing or FMCG production environment. Educational Requirements Bachelor in Engineering (BEngg) in Electrical & Electronic Engineering, Mechanical Engineering Skills Required: Packaging, Food Processing, processed meat Experience Requirements At least 10 year(s) The applicants should have experience in the following business area(s):Manufacturing (FMCG),Agro based firms (incl. Agro Processing/Seed/GM),Overseas Companies,Group of Companies,Chemical Industries Job Location Saudi Arabia Salary Tk. 130000 - 190000 (Monthly)

We are seeking a qualified and motivated Civil Engineer to join our team. The successful candidate will be responsible for planning, supervising, and managing construction activities, ensuring that projects are completed safely, efficiently, and in accordance with approved specifications, quality standards, and project schedules.<br>Requirements:Saudi nationals are preferred. Bachelor's Degree in Civil Engineering.0–5 years of relevant experience in construction, infrastructure, or building projects. Strong knowledge of construction methods, engineering principles, and industry standards. Proficiency in Auto CAD, Civil 3D, and Microsoft Office applications. Experience in site supervision and project coordination. Ability to read and interpret engineering drawings and specifications. Strong analytical, problem-solving, and decision-making skills. Excellent communication and teamwork abilities. Professional engineering certification is an advantage.<br>Interested candidates are invited to submit their CV for consideration.

Be the Change. Join the World’s Most Visionary Developer.<br>Coastal Contracting Company, a proud subsidiary of Red Sea Global, stands apart with its unwavering commitment to quality craftsmanship, excellence, and exceptional service. Trusted with challenging and creative projects, we deliver a wide range of services through a meticulous and innovative approach to project management.<br>Since our inception, we have been dedicated to transforming ideas into reality while maintaining our commitment to both people and the planet.<br>As a purpose-driven company, we actively contribute to Saudi Arabia’s Vision 2030 and lead the global movement toward regenerative tourism – ensuring a sustainable and prosperous future for generations to come.<br>Join us and be part of the positive change for Saudi Arabia and the world.<br><br>Job Purpose:<br>The Senior Planning Engineer has overall responsibility for the management of Planning Engineers to ensure planning work on Coastal Contracting Company projects is undertaken in compliance with Coastal Contracting Company Planning Manual requirements, in line with the required timeframes to the expected quality. The qualified candidate will have the specialized domain knowledge and commitment to excellence expected by the Coastal Contracting Company team.<br><br>Job Responsibilities:<br>Supporting the planning function across a portfolio of projects, providing analysis of cost and schedule trend information, the identification of critical path changes risks for specific projects or across a portfolio of projects. Establish, review and control schedule quality outputs for multiple consultants and contractors across a range of projects Responsible for the generation and reporting of all planning related matters – risks, CPM management, change control etc across the portfolio. Contributes to value engineering and constructability reviews. Manages the resolution of planning phase risk associated with the clarity, specificity and completeness of construction documents. Support the assessment of consultant and contactor time-related claims and advise Coastal Contracting Company of final determinations on the same. Provide executive level strategic advice to Coastal Contracting Company management teams, including the writing of management reports and delivering presentations to the executive.<br><br>Qualifications and Experience:<br>Bachelor of Science in Engineering or any other construction / development related degree.8–10 years’ experience in a large-scale mixed-used development project is desirable. Project Management certification / diploma / master’s is preferable. Proficiency in Primavera planning software (latest version).

<h3 >Civil Engineer Opportunity</h3> <p >House of Consulting Office (HCO), a leading multidisciplinary consulting engineering firm in Saudi Arabia, is seeking an experienced <strong >Civil Engineer</strong> to join our team. This full-time role is based in AlUla, Al Madinah, Saudi Arabia, and involves contributing to diverse engineering projects across the region.</p> <h3 >About House of Consulting Office</h3> <p >HCO specializes in providing integrated architectural, engineering, planning, and project management consultancy services. We are committed to delivering comprehensive solutions that support our clients throughout the entire project lifecycle, ensuring high standards of quality and efficiency in all our endeavors.</p> <h3 >Key Responsibilities</h3> <ul > <li >Supervise civil construction activities and ensure compliance with approved designs.</li> <li >Review civil drawings, shop drawings, material submittals, and method statements.</li> <li >Monitor earthworks, concrete works, roads, infrastructure, and site development activities.</li> <li >Conduct site inspections and ensure compliance with project specifications and quality standards.</li> <li >Coordinate with contractors, consultants, and project stakeholders.</li> <li >Monitor construction progress and resolve technical site issues.</li> <li >Ensure compliance with safety requirements and quality procedures.</li> <li >Prepare inspection reports and progress documentation.</li> <li >Support project delivery within schedule and budget.</li> </ul> <h3 >Required Experience</h3> <p >Candidates for this Civil Engineer position should possess <strong >5 to 10 years of relevant experience</strong> in civil engineering, preferably within a consulting or construction environment. A proven track record in supervising construction activities and managing project documentation is essential.</p> <h3 >Work Environment and Location</h3> <p >This is a full-time position based in AlUla, located within the Al Madinah region of Saudi Arabia. The role involves site-based supervision and coordination, working collaboratively with various project stakeholders to ensure successful project execution.</p> <h3 >Application Process</h3> <p >We invite qualified candidates to apply for this Civil Engineer position. Join House of Consulting Office and contribute to impactful engineering projects in Saudi Arabia.</p>

Job Title: (Planning Engineer – Multiple Locations) Company: Alfanar Projects/ Alfanar Engineering construction Location: (Based on project needs) Job Type: Full-time About Alfanar Projects Since 1976, we’ve grown and diversified our business to meet the evolving needs of a changing world. Alfanar Projects is an integrated global project developer and engineering, construction, and technology solutions provider with a robust portfolio of landmark projects across the energy, water, and infrastructure sectors. From Saudi Arabia to the rest of the world, we work closely with governments and partners to deliver strategic projects that support national goals and long-term visions. Our work directly contributes to sustainable development and infrastructure modernization in multiple countries. At the heart of our success are more than 10,000 professionals, diverse, skilled, and united by purpose. Our global teams are committed to delivering impact-driven solutions that shape a better, more sustainable future. Role Overview We seek a qualified and driven Planning Engineer to join our expanding team. This role involves working across key infrastructure projects, ensuring high standards in delivery, compliance, and stakeholder collaboration. Key Responsibilities Develop, maintain, and update project schedules using scheduling software (e.g., Primavera P6, Microsoft Project). Prepare baseline schedules, resource-loaded schedules, and recovery plans. Monitor project progress and analyze schedule performance. Identify critical path activities and schedule risks. Coordinate with engineering, procurement, construction, and commissioning teams. Prepare weekly and monthly progress reports. Conduct delay analysis and propose mitigation measure Why Join Alfanar Projects Since 1976, we’ve grown and diversified our business to meet the evolving needs of a changing world. Alfanar Projects is an integrated global project developer and engineering, construction, and technology solutions provider with a robust portfolio of landmark projects across the energy, water, and infrastructure sectors. From Saudi Arabia to the rest of the world, we work closely with governments and partners to deliver strategic projects that support national goals and long-term visions. Our work directly contributes to sustainable development and infrastructure modernization in multiple countries. At the heart of our success are more than 10,000 professionals, diverse, skilled, and united by purpose. Our global teams are committed to delivering impact-driven solutions that shape a better, more sustainable future.

Company Description THRAA | ثراء is a comprehensive investment gateway focused on high-potential sectors, offering diverse opportunities in growth-oriented industries. The organization partners with stakeholders to develop sustainable, value-driven projects that support long-term economic development. THRAA | ثراء emphasizes innovation, quality, and strategic planning in all its investments. Team members are encouraged to contribute expertise that supports the successful delivery of projects aligned with the company’s investment goals.<br>Role Description The Site Engineer will oversee daily construction and engineering activities at project sites in Mecca in a full-time, on-site capacity. Responsibilities include supervising civil and structural works, monitoring progress against project plans, and ensuring adherence to safety, quality, and regulatory standards. The role involves coordinating with contractors, suppliers, and project stakeholders, resolving technical issues, and preparing site reports and documentation. The Site Engineer will conduct inspections, implement quality control procedures, and support project managers in meeting timelines and budget targets. This role requires proactive problem-solving, clear communication, and consistent presence on site to ensure smooth project execution.<br>Qualifications<br> Strong on-site supervision skills with experience managing day-to-day construction activities and site operations. Effective communication skills for coordinating with multidisciplinary teams, contractors, and stakeholders. Proficiency in quality control practices, including inspections, compliance checks, and documentation. Knowledge of structural engineering principles and standards relevant to building and infrastructure projects. Background as a civil engineer, with understanding of civil works, materials, and construction methods. Bachelor’s degree in Civil Engineering, Structural Engineering, or a related field. Familiarity with local building codes, safety regulations, and industry best practices. Ability to read and interpret engineering drawings, specifications, and technical documents. Strong organizational and time-management skills, with attention to detail and accuracy. Relevant professional certifications and prior experience in similar site engineering roles are an advantage.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><br></p><p>We are looking for a Saudi Cost Engineer to be part in one of the giga projects in Riyadh! </p><p><br></p><p><b>Key Responsibilities:</b></p><ul><li>Monitor project costs, commitments, and expenditures.</li><li>Prepare monthly cost reports comparing actual costs against budget and project progress.</li><li>Track direct and indirect costs across multiple projects.</li><li>Prepare and update Estimate to Complete (ETC) and Estimate at Completion (EAC).</li><li>Analyze cost variances and recommend corrective actions.</li><li>Control change orders, invoices, subcontractor cost records, and commitments.</li><li>Support project teams in improving cost efficiency and commercial performance.</li><li>Coordinate with Site, Procurement, Planning, and Finance teams.</li><li>Develop cost dashboards and reports using ERP systems, Excel, and Power BI.</li></ul><p><br></p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><br></p><ul><li>Bachelor's degree in Civil Engineering, Construction Management, or a related field.</li><li><b>6-8 years of experience</b> in construction Cost Control / Cost Engineering.</li><li>Strong experience in:</li><li>Budget control</li><li>Cost reporting</li><li>Forecasting (ETC/EAC)</li><li>Productivity analysis</li><li>Cash flow monitoring</li><li>Project financial performance</li><li>Advanced proficiency in Microsoft Excel and a strong working knowledge of ERP systems.</li><li>Experience with Microsoft Power BI.</li><li>Strong analytical, reporting, and communication skills.</li><li>Experience in the Saudi Arabian or GCC construction market is preferred.</li></ul></div>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث مزرعة الوطنية الزراعية في الجوف عن <strong >مهندس زراعي</strong> للانضمام إلى فريقها بدوام كامل. يهدف هذا الدور إلى الإشراف على العمليات الزراعية، من دراسة التربة وتصميم أنظمة الري إلى متابعة إنتاج المحاصيل وجودتها، مع الالتزام بالمعايير الزراعية ومتطلبات السلامة. يتطلب الدور خبرة عملية تتراوح بين 0-1 سنة.</p> <h3 >المهام والمسؤوليات الأساسية</h3> <ul > <li >دراسة خصائص التربة الزراعية الفيزيائية والكيميائية ومكوناتها، ومتابعة فحص عينات النبات والتربة ومياه الري وتحليل نتائجها.</li> <li >دراسة واختبار أنواع الأسمدة المناسبة وتقييم مدى استجابة المزروعات لها.</li> <li >دراسة أنظمة الري واختيار الأنسب منها (كالري السطحي، بالرشاشات، المحوري، أو الموضعي).</li> <li >تصميم مخططات وشبكات الري والصرف الزراعي ومتابعة إجراءات التركيب، وتقييم كفاءة الأنظمة وتطويرها.</li> <li >تحديد الآلات الزراعية المناسبة (كآلات الحراثة والزراعة والرش والحصاد وآلات جرش وخلط الحبوب)، وإعداد برامج تشغيل وصيانة الآلات والتأكد من جاهزيتها.</li> <li >تطوير أساليب وإجراءات العمل ومواكبة التطورات التقنية في المجال الزراعي.</li> <li >إعداد الوثائق والتقارير المتخصصة بنتائج الأعمال وعرضها وتوضيحها وحفظها في قاعدة البيانات الخاصة بها وفقاً للسياسات والإجراءات المعتمدة.</li> </ul> <h3 >الإشراف على العمليات الزراعية</h3> <ul > <li >تخطيط ومتابعة العمليات الزراعية وفق الخطط والمواسم الزراعية المعتمدة.</li> <li >الإشراف على عمليات زراعة وإنتاج المحاصيل ومتابعة مراحل النمو والتأكد من تطبيق الممارسات الزراعية المناسبة.</li> <li >متابعة برامج الري والتأكد من توفير الاحتياجات المائية للمحاصيل بكفاءة وفي الأوقات المناسبة.</li> <li >إعداد ومتابعة برامج التسميد وتحسين استخدام الأسمدة وفق احتياجات المحاصيل ونتائج الفحوصات الزراعية.</li> <li >متابعة برامج مكافحة الآفات والأمراض الزراعية وتحديد الإجراءات المناسبة للحد من انتشارها.</li> <li >إجراء ومتابعة الفحوصات الزراعية للتربة والمحاصيل وتقييم الحالة الصحية والنمائية للنباتات.</li> <li >متابعة استخدام المبيدات والأسمدة والمواد الزراعية والتأكد من استخدامها وفق التعليمات والجرعات المعتمدة.</li> <li >الإشراف على العمالة الزراعية وتوزيع المهام ومتابعة تنفيذ الأعمال وفق الخطط والتعليمات.</li> <li >متابعة عمليات الحصاد والتجهيز والتأكد من الالتزام بمعايير الجودة وتقليل الفاقد الزراعي.</li> <li >متابعة استهلاك المياه والأسمدة والمواد الزراعية والمساهمة في تحسين كفاءة استخدام الموارد وتقليل التكاليف.</li> <li >إعداد تقارير الإنتاج والعمليات الزراعية ومؤشرات الأداء وتوثيق الملاحظات والإجراءات التصحيحية.</li> <li >تقديم المقترحات الفنية التي تسهم في تحسين الإنتاجية وجودة المحاصيل وكفاءة العمليات الزراعية.</li> </ul> <h3 >المؤهلات والخبرات المطلوبة</h3> <ul > <li >درجة البكالوريوس في الهندسة الزراعية أو مجال ذي صلة.</li> <li >خبرة عملية تتراوح بين 0-1 سنة في مجال الهندسة الزراعية.</li> <li >القدرة على تطبيق الممارسات الزراعية المناسبة والالتزام بالمعايير ومتطلبات الجودة والسلامة.</li> </ul> <h3 >المهارات والكفاءات</h3> <ul > <li >مهارات تحليلية قوية لدراسة التربة والمياه والنباتات.</li> <li >القدرة على تصميم وتطوير أنظمة الري والصرف.</li> <li >معرفة بالآلات الزراعية وبرامج تشغيلها وصيانتها.</li> <li >مهارات إشرافية وتنظيمية لمتابعة العمليات والعمالة.</li> <li >القدرة على إعداد التقارير الفنية وتقديم المقترحات.</li> <li >الالتزام بمعايير الجودة والسلامة الزراعية.</li> </ul> <h3 >بيئة العمل</h3> <p >هذا الدور بدوام كامل ومقره في الجوف، ضمن فريق مزرعة الوطنية الزراعية. يتطلب الدور التزاماً بالعمل الميداني والإشراف المباشر على العمليات الزراعية لضمان تحقيق الأهداف الإنتاجية والجودة. ندعو المهندسين الزراعيين الطموحين الذين يستوفون المتطلبات المذكورة للتقدم لهذه الفرصة.</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking an experienced Dell Storage &amp; Infrastructure Engineer responsible for the administration, implementation, troubleshooting, performance optimization, and lifecycle management of Dell enterprise storage, backup, cyber recovery, Tape library, and server infrastructure. The ideal candidate should possess strong expertise in Dell storage technologies, backup solutions, VMware virtualization, and enterprise server hardware supporting mission-critical environments.</p><br><p><strong>Key Responsibilities:</strong></p><br><p><strong>Dell PowerScale (Isilon)</strong></p><br><p>Administer, configure, and support Dell PowerScale (Isilon) clustered NAS storage in enterprise environments. Install, expand, and maintain PowerScale clusters, perform OneFS upgrades and firmware updates, and manage SmartPools, SmartQuotas, SmartConnect, SnapshotIQ, SyncIQ, SmartDedupe, and SmartFail features. Provision and manage NFS, SMB/CIFS, FTP, and HDFS file services, configure replication between production and disaster recovery sites, and ensure high availability and data protection. Monitor cluster health, optimize storage performance, conduct capacity planning, troubleshoot client connectivity, and file system issues, and collaborate with virtualization, backup, and infrastructure teams to deliver scalable, secure, and resilient file storage services while adhering to enterprise operational and security standards.</p><br><p><strong>Dell PowerStore &amp; PowerMax</strong></p><br><p>Administer, configure, install, and support Dell PowerStore and Dell PowerMax enterprise storage platforms, including storage provisioning, host integration, performance optimization, and lifecycle management. Manage storage pools, volumes, storage groups, masking views, snapshots, thin provisioning, replication technologies (native replication, Metro, and SRDF), firmware upgrades, capacity planning, and performance tuning. Configure and maintain SAN infrastructure, including Brocade Fibre Channel switches, zoning, VSANs, alias management, NPIV, port administration, firmware upgrades, switch health monitoring, SAN connectivity, and multipathing configuration and troubleshooting. Provision block and file storage for VMware, Windows, Linux, and Oracle environments while ensuring high availability, business continuity, and disaster recovery readiness. Perform storage migrations, LUN provisioning and expansions, health monitoring, and troubleshooting using Dell Unisphere. Collaborate with server, virtualization, backup, and infrastructure teams to support enterprise applications while ensuring compliance with storage best practices, security standards, and operational lifecycle management.</p><br><p>&nbsp;<strong>Dell PowerEdge &amp; Dell MX Server Infrastructure</strong></p><br><p>Administer, install, configure, and support Dell PowerEdge servers and Dell MX7000 modular infrastructure in enterprise data center environments. Perform server provisioning, hardware installation, BIOS, RAID, iDRAC, and Lifecycle Controller configuration, firmware upgrades, and hardware troubleshooting for CPUs, memory, storage, network adapters, and power components. Manage Dell MX7000 chassis, compute sleds, fabric modules, and server profiles using OpenManage Enterprise and OpenManage Enterprise Modular. Support VMware ESXi deployments, operating system installations, hardware lifecycle management, performance monitoring, capacity planning, and proactive maintenance. Collaborate with storage, virtualization, backup, and networking teams to ensure high availability, optimal performance, and adherence to enterprise infrastructure standards and best practices.</p><br><p><strong>Dell Data Domain &amp; Cyber Recovery Solution (CRS)</strong></p><br><p>Administer, configure, and support Dell Data Domain and Dell Cyber Recovery Solution (CRS) to deliver secure, resilient, and cyber-recovery-ready backup infrastructure. Configure and manage Data Domain appliances, including MTrees, DD Boost, NFS/CIFS shares, replication, retention policies, immutable storage, and capacity optimization. Deploy and maintain Cyber Recovery Vault, Cyber Recovery policies, orchestration workflows, and air-gapped recovery environments integrated with Data Domain and CyberSense. Perform backup integrity validation, cyber recovery testing, ransomware recovery exercises, software and firmware upgrades, health monitoring, troubleshooting, and performance tuning. Collaborate with backup, storage, virtualization, and security teams to ensure backup availability, regulatory compliance, disaster recovery readiness, and rapid recovery of critical business services.In addition, he must have VMware administration and NetWorker L1 Support.</p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Job Purpose</b>: The Principal Geotechnical &amp; Hydrology is the technical authority (SME) responsible for ground stability (geotechnical) both Open Pit and Underground including Tailing Facilities and Water Management inputs across the full project lifecycle, from business case through feasibility studies. This role is critical to de-risking mining projects, from geotechnical and hydrology aspects.</p><p>Key Accountabilities:</p><ul><li>Act as SME for geotechnical and hydrogeology disciplines and provide overall technical leadership</li><li>Define preliminary slope angles, ground conditions, groundwater/dewatering assumptions, and high-level tailings methodologies during strategic, business case, and scoping stages</li><li>Identify key risks including slope instability, ground uncertainty, and water inflow/flooding, and support initial mine planning and cost assumptions (geotechnical, dewatering, tailings)</li><li>Lead geotechnical investigation programs (drilling, logging, ATV/OTV, lab testing) and hydrogeological assessments (aquifer behavior, pump/packer tests, water balance) during PFS</li><li>Develop preliminary slope design parameters, ground control concepts, dewatering strategies, water handling systems, and geotechnical/hydrology risk registers with mitigation plans</li><li>Contribute to mine design optimization and infrastructure development (TSF, plant, dumps)</li><li>Finalize slope design criteria, ground support systems, groundwater models, dewatering design, water balance, and management strategies during FS/BFS</li><li>Define BFS-level design parameters, CAPEX/OPEX inputs (e.g., dewatering costs, geotechnical requirements, tailings facilities), and risk mitigation measures</li><li>Coach and mentor business development personnel and support capability development within the organization</li><li>Ensure compliance with company and site-specific policies, standards, and procedures, and recommend improvements where required</li><li>Provide technical expertise in geotechnical and hydrology engineering across affiliates to support effective implementation of Maaden standards</li><li>Support the development, interpretation, and continuous improvement of Maaden policies, standards, and procedures, and assist corporate SME teams</li><li>Contribute to technical communications (incident briefings, programs, initiatives, periodic updates) aligned with corporate standards across multiple channels</li><li>Support EHSS programs through KPI tracking and delivery of key program requirements</li><li>Ensure decision-ready outputs at each study stage (Scoping, PFS, FS), including on-time delivery of geotechnical and hydro scope, compliance with study requirements, quality of deliverables, and progressive improvement in accuracy</li><li>Perform additional duties as assigned by management</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><b>Minimum Qualifications:</b></p><ul><li>Bachelor s degree in Geology/Mining Engineering/Civil Engineering.</li></ul><p>Minimum Experience:</p><ul><li>Project management experience.</li><li>Minimum 20 years of experience in Mining operations, project, engineering, and laboratory environment related to hard rock geotechnical and hydrology.</li></ul><p>Generic Maaden behavioral competencies required:</p><ul><li>Leadership</li><li>Achievement</li><li>Drive</li><li>Communication</li><li>Teamwork &amp; collaboration</li><li>Analytical thinking</li></ul><p>Skills:</p><ul><li>As technical services functional leader, Principal for Geotechnical and Hydrology position shall be the champion of change for improvement in all aspects of Geotechnical and Hydrology but not limited to existing operation and growth study.</li><li>This position is responsible to deliver in quality and timely manner resources model with consultation with other functional within technical services, Operational leadership and Corporate.</li><li>Knowledge of life-of-mine planning including budgeting and metal planning.</li><li>Knowledge of ICMM GISTM standard.</li><li>Ability to present to and collaborate with corporate executives and the site Senior Leadership Team required</li><li>Strong computer skills and proficiency in Microsoft Office (Word, Excel, Outlook, PowerPoint, and Access) required</li><li>Knowledge in Safety requirements.</li><li>Ability to work in a multi-cultural environment</li><li>Geotechnical and Hydrology Principal role needs to communicate frequently within all internal and external stakeholders for all matters related to Geotechnical and Hydrology Engineering.</li></ul><p></p></section>