Network Engineer Jobs in Saudi

Job Title: Senior Electrical Engineer (Electrical Equipment Maintenance) Location: Central Region – Riyadh and Surrounding Areas Job Type: Full-time Job Summary We are seeking an experienced Electrical Engineer to lead the maintenance of electrical equipment with experience of the Saudi Energy procedures, standards and requirements in the Central Region. The candidate will be responsible for ensuring the readiness and reliability of electrical equipment, managing and leading preventive and corrective maintenance teams and fully complying with the standards and specifications of the Saudi Energy Company. Duties and Responsibilities Leading and managing preventive, corrective, and emergency maintenance of electrical equipment (transformers, breakers, distribution panels, medium and high voltage switches, protection and control systems). Develop and implement periodic maintenance plans and schedules in accordance with SE standards. Diagnose electrical faults, perform root cause analysis, and propose appropriate technical solutions. Managing site teams, assign tasks, and monitor performance. Technical tests awareness of equipment (insulation, resistance, protection tests) and document results prepration. Prepare periodic technical reports and fault reports and submit them to management and relevant authorities. Coordinate with SE representatives to ensure compliance with specifications and contractual requirements. Enforce occupational safety and health standards in all maintenance activities and ensure the safety of work teams. Manage spare parts and materials to ensure availability for continuous maintenance operations. Participate in the handover of new projects and review technical drawings and documents. Qualifications and Requirements Bachelor’s degree in Electrical Engineering Minimum 10 years’ experience in electrical equipment maintenance, preferably on SE projects or similar energy sector projects. Thorough knowledge of SE standards Membership in the Saudi Council of Engineers (SCE). Experience with medium and high voltage systems (13.8k V / 33k V / 132k V) is a preferred advantage. Fluent in both Arabic and English, spoken and written. Valid driving license and willingness to travel between project sites in the Central Region.<br>Personal Skills Strong leadership skills and ability to manage field teams. Ability to work under pressure and respond to emergency faults. Strong analytical skills for fault diagnosis and decision making. Effective communication skills with clients and official entities.

Join a Leading AEC Consultancy with Over 40 Years of Experience Step into a high-impact role with an esteemed Architecture, Engineering, and Construction (AEC) consultancy recognized for excellence in designing and supervising iconic hospitality, commercial, industrial, and mixed-use projects. Known for our commitment to sustainable design and Gold LEED certification standards, we are seeking a highly qualified BIM Engineering Manager to lead our project in Riyadh.<br><br>Project Overview: This high-profile heritage project in Riyadh is part of Saudi Arabia's Vision 2030 initiative and encompasses: - Mixed-use buildings, academies, and a unique mud-brick cinema with underground parking. - A traditional Najdi-style local mosque. - A museum, reflecting Saudi heritage and designed to inspire the local community and visitors alike.<br><br>Position Overview: The Sr. BIM Engineer will work onsite, reporting to Chief RE/ Resident Engineers and both the Project Management Consultant (PMC) and the Client. As a key leader, the candidate will play a pivotal role in driving collaboration, ensuring quality standards, and delivering a project that exemplifies excellence in both design and execution.<br><br>Key Responsibilities:1. Project Team Leadership and Management: - Lead, manage, and mentor the onsite project team, ensuring seamless collaboration and alignment with project goals. - Coordinate with all stakeholders, including PMC, Client, and contractors, to drive project milestones and address technical issues.<br>2. BIM Management and Implementation: - Oversee the implementation of BIM protocols, ensuring compliance with industry standards and the project's technical requirements. - Utilize Revit, Navisworks, and Auto CAD to manage 3D modeling and support high-level project decision-making. - Perform regular quality checks on BIM deliverables to ensure accuracy and adherence to design specifications.<br>3. Technical Oversight and Quality Control: - Establish and maintain quality control procedures, ensuring that all project documentation related to BIM, meets the highest standards. - Conduct regular audits to ensure adherence to BIM standards and coordinate the resolution of design conflicts. - Facilitate cross-disciplinary reviews, verifying that all models and drawings align with the project's goals and specifications.<br>4. Stakeholder Communication and Coordination: - Maintain consistent and transparent communication with all stakeholders, including PMC, Client representatives, contractors, and other consultants. - Prepare and present progress reports, detailing technical challenges, solutions, and project milestones.5. Project Execution: - Ensure all project deliverables comply with LEED certification standards, prioritizing sustainability and innovation.6. Risk Management and Problem Solving: - Identify potential risks and proactively develop strategies to mitigate them, ensuring project continuity and minimizing delays. - Apply critical thinking and problem-solving skills to address unexpected challenges and complex project requirements.<br><br>Qualifications:Education: Bachelor’s Degree in Engineering or Architecture. Experience: Minimum 15+ years of experience, with at least 10 years in similar roles and 5 years in the GCC. Technical Skills: Proficiency in Revit, Navisworks, and Auto CAD; additional certifications are highly desirable. Working Knowledge on COBIE and GIS will be an added advantage Communication Skills: Strong written and oral communication skills, with an ability to present complex information to diverse stakeholders. Industry Knowledge: In-depth knowledge of BIM standards, quality control procedures, and best practices in construction supervision. Preferred Experience: Familiarity with projects involving museums, heritage sites, or high-rise buildings, particularly in a PMC or Construction Supervision Consultant role.<br><br>Joining Time:1 to 2 weeks.

Tawafuq Real Estate is seeking a qualified and motivated professional to join our team in the following position:<br>Qualifications & Experience Bachelor’s degree in architecture and planning or an equivalent field.2–5 years of relevant professional experience in architectural design. Proficiency in interior and exterior architectural design, master planning, and landscaping. Strong skills in 3D modeling and visualization. Proficiency in Auto CAD and 3ds Max, or similar architectural design software. Ability to prepare architectural drawings, space schedules, and develop designs according to project requirements. Strong coordination skills and the ability to effectively manage design revisions and feedback.<br>Key Responsibilities Develop and prepare interior and exterior architectural designs. Create 3D models and architectural visualizations/renderings. Prepare architectural drawings and space schedules. Review and implement design revisions and comments. Coordinate with relevant stakeholders to ensure designs meet project requirements and quality standards.

???? #HIRING Tangent International is urgently looking for a DPI Performance Engineer for a 12-month extendable contract based in Riyadh, Saudi Arabia.<br>????️ Key Responsibilities:- Monitor DPI platform health, utilization, capacity, traffic behaviour and service KPIs/KQIs- Analyse application traffic, classification accuracy, traffic trends and abnormal patterns- Investigate performance degradation and complete detailed Root Cause Analysis- Develop performance dashboards, reports, thresholds and proactive alerts- Forecast capacity requirements and recommend expansion or optimization actions- Validate DPI performance following upgrades, migrations and configuration changes- Automate performance analysis, reporting and data processing<br>???? Requirements:- 4+ years of relevant telecom network or service-performance experience- Strong understanding of DPI concepts and platform architecture- Experience with KPI/KQI analysis, traffic monitoring, capacity management and RCA- Strong IP networking, TCP/IP and application-protocol knowledge- Understanding of throughput, bandwidth, latency, RTT, packet loss and QoS- Experience with performance dashboards, reporting and monitoring tools- Good Linux and network-troubleshooting knowledge- Experience in a telecom operator, ISP, managed-services or vendor environment<br>???? Send your updated CV to: camelia.zekri@tanint.com☎️ +44 1277 635 827

About Us<br>Since 1974, S. K. M Air Conditioning LLC has been a leading manufacturer of HVAC equipment across the Middle East and beyond. With 2,000+ employees representing 30+ nationalities, we deliver innovative, reliable, and energy-efficient solutions across 30+ global markets.<br>Role Overview<br>We are looking for a Sales Service Engineer – HVAC (After Sales) to join our After Sales team. This role is responsible for troubleshooting, warranty handling, and customer support, ensuring SKM systems consistently perform at the highest standards.<br>Key Responsibilities<br>???? Handle warranty and service complaints, ensuring resolution within set KPIs.???? Troubleshoot HVAC equipment (chillers, AHUs, DX systems, package units).???? Conduct root cause analysis of failures and prepare service reports.???? Support retrofit, repair, and maintenance activities.???? Supervise technicians on-site, ensuring safety and quality compliance.???? Provide technical feedback to engineering and quality teams.???? Assist in customer training and prepare technical documentation.<br>What We’re Looking For<br>✅ Bachelor’s degree in Mechanical Engineering (or 5–7 years HVAC service experience).✅ 5+ years’ experience in installation, operation, maintenance, and service of HVAC systems.✅ GCC experience preferred (HVAC service, MEP, or FM).✅ Strong troubleshooting, technical, and customer service skills.✅ Good communication skills in English (Arabic/Hindi/Urdu is an advantage).✅ Knowledge of mechanical/electrical controls (analog & microprocessor-based).<br>Why Join SKM?<br>???? Be part of one of the region’s leading HVAC manufacturers.???? Collaborative and multicultural work environment.???? Opportunities to grow your career and expand your technical expertise.???? Drive meaningful work in after sales service and customer satisfaction.<br>???? Apply Now to be part of SKM and make a difference in HVAC after sales excellence!

About the Dream Realization Lab The Dream Realization Lab (DRL) is the product development team within Dhahran Techno Valley Company (DTVC). We turn ideas and technologies into functional, well-engineered prototypes across a wide range of industries - from energy and industrial systems to consumer devices and smart solutions. Our work spans concept validation and feasibility studies through to detailed design and working prototypes, delivering manufacturable designs and prototype documentation before the industrialization phase begins. We are a small, fast-moving team that is growing, and every engineer here contributes meaningfully to every project they work on.<br>The Role We are looking for a Design Engineer who is as comfortable behind a screen as they are building with their hands. This is not a pure CAD role. You will work across the full development arc - from early concept exploration and feasibility to detailed design, prototyping, and testing - collaborating closely with Electrical, Controls, and Industrial Design colleagues to deliver integrated solutions. Projects at DRL are varied, timelines are tight, and the problems are often novel. You will need to figure things out.<br>What You Will DoDesign and Modelling Design 3D parts and assemblies in Solid Works, producing clean parametric models and detailed engineering drawings Apply DFM, DFA, and DFR principles throughout to ensure designs are manufacturable, assemblable, and serviceable Perform tolerance analysis and generate GD&T-annotated drawings for internal fabrication Design against multi-disciplinary constraints, translating inputs from Electrical, Controls, and Industrial Design into mechanical solutions that meet the requirements Prototyping and Making Build, test, and iterate physical prototypes hands-on using FDM, resin, and metal 3D printing, laser cutting, CNC machining, and manual fabrication Use 3D scanning and reverse engineering workflows to digitize existing components or physical references Plan and carry out structured testing to validate design decisions, and iterate quickly based on results Collaboration and Problem Solving Actively contribute to improving how the lab works - proposing better tools, workflows, and processes as the team grows Break down complex, ambiguous multi-disciplinary challenges into structured engineering problems and drive them to validated solutions Develop creative mechanical mechanisms and design solutions - many of our challenges do not have off-the-shelf answers Documentation Produce complete engineering documentation: drawings, BOMs, assembly instructions, and design rationale records Write clear technical reports covering design decisions, test results, and prototype documentation to support handoff Maintain organized CAD file structures and revision control throughout the project lifecycle<br>What We Are Looking For Experience A degree in Mechanical Engineering, Product Development Engineering, or a related field Several years of hands-on experience in a product development, R&D, or prototyping environment A background where engineering standards are high: consumer electronics, industrial equipment, medtech, robotics, or similar A track record of delivering physical prototypes, not just drawings Technical Skills Proficiency in Solid Works; general knowledge of 3D modelling in other tools is a plus Strong 3D part design skills with both additive and subtractive design thinking Hands-on experience with rapid prototyping methods: 3D printing, laser cutting, CNC, scanning Ability to produce detailed drawings with tolerances and GD&TExperience with FEA or CFD simulation tools is beneficial but not required Personal Qualities Strong communicator - you can clearly convey technical ideas to colleagues across different disciplines Hands-on and curious - equally energized by a CAD model and a workshop build Problem-solver who can work through novel challenges without a defined playbook Organized and self-directed, able to manage your own workload across multiple projects A team player who thrives in a small, dynamic, and fast-moving environment

We are looking for a highly skilled Senior Data Engineer with strong hands-on expertise in Talend to design, develop, optimize, and support enterprise-grade data integration and data engineering solutions.<br>The role will be responsible for building robust ETL/ELT pipelines, integrating data from multiple source systems, ensuring data quality and reliability, and supporting end-to-end data platform operations across development, testing, and production environments.<br>Key Responsibilities<br>Design, develop, and maintain scalable ETL/ELT data pipelines using Talend. Build and manage integrations across databases, APIs, files, applications, and enterprise systems. Develop reusable Talend jobs, components, frameworks, and standardized integration patterns. Perform data extraction, transformation, validation, cleansing, and loading across multiple platforms. Design and implement batch and near real-time data integration workflows. Work with relational databases such as Oracle, SQL Server, Postgre SQL, MySQL, and similar platforms. Develop complex SQL queries, stored procedures, transformations, and data reconciliation logic. Optimize Talend jobs for performance, scalability, and reliability. Troubleshoot data pipeline failures, performance bottlenecks, and production issues. Implement error handling, logging, monitoring, restartability, and operational controls. Support deployment and migration of Talend jobs across DEV, TEST/UAT, and PROD environments. Ensure data accuracy, completeness, consistency, and quality throughout the integration lifecycle. Collaborate with data architects, business analysts, application teams, database teams, and business stakeholders. Translate business and technical requirements into detailed data integration solutions. Participate in source-to-target mapping, data profiling, data modeling, and technical design activities. Maintain technical documentation, data mappings, interface specifications, and operational runbooks. Support production operations, incident resolution, root cause analysis, and continuous improvement. Perform code reviews and ensure adherence to data engineering and Talend development best practices. Mentor junior data engineers and provide technical guidance to the wider delivery team. Ensure solutions comply with organizational security, data governance, and data management standards. Required Skills and Experience<br>Bachelor’s degree in Computer Science, Information Technology, Engineering, or a related field.5+ years of experience in Data Engineering, ETL, or Data Integration. Strong hands-on experience with Talend Data Integration / Talend Data Management Platform. Strong knowledge of Talend components, contexts, metadata, joblets, routines, scheduling, and deployment. Advanced SQL and strong understanding of relational databases. Strong understanding of ETL/ELT architecture, data warehousing, dimensional modeling, and data integration patterns. Experience handling large datasets and complex enterprise data environments. Experience with APIs, REST/SOAP services, JSON, XML, CSV, and flat-file integrations. Strong understanding of data quality, validation, reconciliation, and error-handling techniques. Experience with Git or other source-control and CI/CD tools. Good understanding of Linux/Unix environments and shell scripting. Strong troubleshooting, analytical, and problem-solving skills. Ability to work independently and manage multiple technical tasks in parallel. Strong communication skills and ability to work directly with technical and business stakeholders. Preferred Qualifications<br>Experience with Talend Administration Center (TAC) and Talend Runtime. Experience with Talend Data Quality. Experience with cloud data platforms such as Azure, AWS, or GCP. Experience with Snowflake, Databricks, or modern cloud data warehouses/lakehouses. Familiarity with Kafka or other streaming technologies. Experience in enterprise data governance and metadata-management environments. Talend or relevant data engineering certifications are an advantage. Key Competencies<br>Strong technical ownership Problem-solving and troubleshooting Data quality mindset Performance optimization Stakeholder communication Documentation and knowledge transfer Team collaboration and mentoring

???? We’re Hiring | Quality Control Engineer ????<br>???? Job Title: Quality Control Engineer???? Location: Riyadh- Site???? Job Type: Full-time.???? Industry: Construction company⏳ Experience: 4–10 Years<br>Job Overview We are seeking a qualified and detail-oriented Quality Control Engineer to join our project team. The successful candidate will be responsible for ensuring that all construction activities are executed in accordance with approved drawings, project specifications, applicable standards, codes, and quality requirements. Key Responsibilities Implement and monitor Quality Control procedures for construction activities on site. Inspect works and materials to ensure compliance with approved drawings, specifications, and project requirements. Prepare and submit Inspection Requests (IRs/WIRs) and coordinate inspections with consultants. Review Method Statements, Material Submittals, Shop Drawings, and technical documents. Identify non-conformities, issue Non-Conformance Reports (NCRs), and follow up on corrective actions. Maintain accurate and up-to-date quality records, inspection reports, checklists, and documentation. Coordinate with construction, engineering, and project teams to ensure quality standards are consistently achieved. Monitor the quality of workmanship and materials throughout the construction process. Ensure compliance with the project QA/QC Plan, applicable codes, specifications, and safety requirements. Participate in inspections, testing, and quality-related meetings as required. Follow up on corrective and preventive actions and ensure timely closure of quality issues. Job Requirements Bachelor’s degree in Civil, Mechanical, Electrical, or related Engineering discipline. Minimum 4 years of relevant experience as a Quality Control Engineer in construction projects. Strong knowledge of quality standards, specifications, inspection procedures, and construction practices. Experience working with Consultants, Contractors, and Third-Party Inspectors. Good knowledge of QA/QC documentation, including IRs, WIRs, NCRs, ITPs, Method Statements, and Checklists. Ability to read and interpret engineering drawings, specifications, and technical documents. Strong communication, coordination, and reporting skills. Site-based construction experience is mandatory. Why Join Us? Opportunity to work on major construction and general contracting projects. Professional and collaborative working environment. Opportunities for career development and leadership growth. Exposure to challenging and high-profile construction projects. Candidates who are available to join immediately will be given priority.

-Job Overview:We are looking for an experienced Site Architectural Engineer with strong expertise in Fit-Out, Finishing, and Architectural Site Execution to join our team. The ideal candidate should have 7–10 years of experience in architectural site works, with a strong track record in managing and supervising interior fit-out, finishing works, and construction projects from execution through completion.<br>-Key Responsibilities:Supervise and manage Fit-Out, Finishing, and Architectural Works at the project site. Ensure all works are executed according to approved drawings, specifications, and quality standards. Monitor the quality and progress of finishing and fit-out activities. Review shop drawings, material submittals, and technical details. Coordinate architectural works with MEP, structural, and other project disciplines. Inspect completed works and ensure proper quality and finishing standards. Coordinate with contractors and subcontractors to resolve site issues and maintain project progress. Follow up on RFIs, inspections, and technical approvals. Ensure approved materials and finishes are properly implemented. Monitor project progress and report site issues and observations to the project management team.<br>-Requirements:Bachelor’s degree in Architecture or Architectural Engineering.7–10 years of relevant experience in architectural site supervision. Strong hands-on experience in Fit-Out, Finishing, and Architectural Works. Fit-Out and Finishing experience is highly preferred. Strong knowledge of finishing materials, construction methods, and architectural details. Experience supervising and coordinating site activities with contractors, subcontractors, consultants, and other disciplines. Ability to review architectural drawings, shop drawings, specifications, and material submittals. Strong knowledge of interior finishes, ceilings, flooring, walls, doors, joinery, and other architectural elements. Experience in quality control, site inspections, and resolving technical/site issues. Proficiency in Auto CAD; knowledge of Revit/BIM is an advantage. Strong communication, coordination, and problem-solving skills.<br>Portfolio Requirement:Please ensure that you upload your updated CV along with your Portfolio when applying. Your Portfolio should demonstrate relevant experience in Site Execution, Fit-Out, Finishing, and Architectural Construction Works. Priority will be given to candidates who provide a relevant Portfolio showcasing their experience in Fit-Out, Finishing, and Site Execution.

Job Summary Lead and coordinate commercial and contractual activities throughout the project lifecycle. Manage variations, claims, valuations, payment applications, and final accounts. Review and certify payment applications from subcontractors, suppliers, and consultants. Monitor project costs, budgets, cash flow, and commercial performance. Administer subcontracts and ensure compliance with contractual requirements. Coordinate with Project Management, Procurement, Contracts, Finance, and QS teams. Prepare commercial reports and contractual correspondence. Lead and support the commercial team to ensure timely delivery of assigned activities. Qualifications, Skills & Experience Bachelor’s degree in Civil Engineering, Quantity Surveying, Construction Management, or related field.8–10 years of experience in the construction industry. Strong knowledge of contracts, variations, claims, valuations, and final accounts. Strong leadership, negotiation, communication, and analytical skills.

We are currently looking for a Supplier Industrialization Quality Engineer to join a leading industrial company in Saudi Arabia, based in Riyadh or Dammam.<br>The role focuses on working directly with suppliers to improve quality, manufacturing efficiency, capacity and cost performance, while ensuring suppliers are ready for new products and increased production volumes.<br>Key responsibilities:Conduct supplier quality, manufacturing process and VDA 6.3 audits Assess supplier capacity, processes, equipment and production readiness Identify bottlenecks and drive corrective and continuous improvement actions Support suppliers in improving CP/CPK, cycle time, yield and quality performance Lead supplier quality problem-solving and improvement initiatives Review PFMEA, control plans, process flows and work instructions Support APQP, PPAP and First Article Inspection activities Support new product introduction, ramp-up, volume increases and localization projects Work closely with Quality, Purchasing, R&D, Manufacturing and Logistics teams Provide technical guidance and training to suppliers on Lean, Six Sigma, process control and mistake-proofing<br>What we are looking for:Engineering degree, ideally Mechanical, Production, Automotive or Electrical7+ years of experience in manufacturing or supplier engineering Strong experience working directly with suppliers on quality improvement and industrialization Experience in automotive, industrial, consumer or electronics manufacturing. Elevator experience is a plus Strong knowledge of APQP, PPAP, PFMEA, Control Plans and 8DExperience with VDA 6.3, Lean Manufacturing and/or Six Sigma Knowledge of capacity analysis, time studies and line balancing Strong problem-solving and communication skills Willingness to travel extensively to supplier sites, approximately 15 days per month<br>This is a hands-on, supplier-facing position for someone who enjoys working directly with manufacturing teams and driving measurable improvements on the factory floor.<br>Location: Riyadh or Dammam, Saudi Arabia<br>#Hiring #Saudi Arabia #Riyadh #Dammam #Supplier Quality #Supplier Development #Industrialization #Quality Engineering #Manufacturing #Engineering #Automotive #Industrial Engineering

Key Job Responsibilities:<br>Review the opening order, job specifications, and general drawings from the customer. Prepare a complete electrical drawing package for submittal to the client as per project requirements. Create an electrical bill of material for the project. Continuously monitor and support the drafters to ensure schedules are met and procedures are followed. Submit the detailed electrical drawing package including the detailed internal layout and wiring diagrams for release to manufacture. Scan all the project documents after launching and highlight all the clarifications and conflicts before starting the design. Work progressively towards eliminating the Engineering Change Notifications (ECNs) due to internal causes. Work progressively towards eliminating the issuance of Revised Bill of Materials (BOMs) due to internal causes. Monitor and control all the received customer changes so that they can be properly implemented in the design submittals / re-submittals. Meet or improve the set targets for standard design hours allocated per product type. Take into consideration the company scope and the material cost and avoid ordering any un-budgeted material without prior coordination with the project manager, resolve promptly any outstanding questions or issues that arise during design review. Understand customer real needs and prepare design package to meet customer expectations in order to meet or exceed customer satisfaction index target.<br>Competencies:<br>Collaboration. Customer Focus. Learning & Coaching. Operational Excellence. Engineering Design. Follow up & Coordination. Knowledge in Standards, Policies & Procedures. Knowledge in Work Tools. Communication Skills. Documenting & Reporting.<br>Professional Skills:<br>Proficiency in MS Office, Auto CAD, EPLAN, drafting standards and practices. Proficiency in Siemens S8 and ABB Pro E is preferred. Strong Oral and Written communications skills. Planning competency. Symbols and terminology used in electrical engineering drawings. Proficiency with different electric protection functions and schemes.<br>Experience:<br>2–6 years of relevant experience in electrical engineering design, drafting, or related industrial applications.<br>Qualifications:<br>Bachelor's Degree in Electrical Engineering.

***Why this role exists***<br>Teslm is establishing its central SIEM/SOC capability and needs one hands-on engineer to own it end to end. You will decide how the pipeline is assembled, bring the log sources in, write the detections and run the daily triage — working directly with the CEO & CISO. If you have built or run a SIEM with your own hands and want the whole thing to be your responsibility, this is that role.<br>***About the role***<br>12 months in, success looks like this: every relevant log source from our AWS environment and our applications is onboarded, normalised into a common schema and reported healthy every month; a focused set of priority detections is live and tuned so that the alert queue can be trusted; the triage workflow (alert → investigate → contain → document → close or escalate) is documented in runbooks that an L1 Analyst can follow; log retention and an immutable archive are in place; and the evidence an auditor asks for under PCI DSS v4 Requirement 10, PDPL, NCA ECC-2:2024 and ISO/IEC 27001 A.8.15 and A.8.16 can be produced on request. You will also give day-to-day technical direction to an L1 SOC Analyst.<br>We are deliberately not fixed on a vendor. You may build Wazuh from scratch, monitor and maintain Crowd Strike, or work with a Wazuh service provider — we are hiring for general SIEM competence, not for a product.<br>***What you'll do***<br>• Own log-source onboarding: Cloud Trail, Guard Duty and Security Hub findings, infrastructure logs and application security events, each parsed into a common schema.<br>• Own the detection set: write, version and tune a small number of high-value rules mapped to our top risks, and review false positives every week.<br>• Own the health of every log source — spot silent gaps before an auditor or an attacker does.<br>• Own daily triage and containment: investigate related events by host, user and IP, contain with a second pair of eyes before any destructive production action, and document every case.<br>• Own retention and evidence: an immutable log archive, retention aligned to our compliance obligations, and quarterly evidence packs.<br>• Own the runbooks, saved queries and escalation path the L1 SOC Analyst works from, and set that analyst's daily priorities.<br>***Required***<br>• 2–4 years of hands-on SIEM/SOC work in which you personally onboarded log sources, wrote or tuned detection rules, and triaged the resulting alerts.<br>• You have built or maintained a SIEM yourself — Wazuh, Elastic, Splunk, Crowd Strike or similar — and can explain the design choices you made.<br>• Working knowledge of AWS security logging: Cloud Trail, Guard Duty and Security Hub, and how their events end up in a SIEM.<br>• Comfortable with log parsing and normalisation, query languages, and Linux administration for the components you run.<br>• Able to write clear runbooks and incident documentation.<br>• This is a hands-on practitioner role, not an architect or leadership position — you will build and run the tooling yourself, working directly with the CEO & CISO. If you are looking for a team to manage, this is not the right fit.<br>***Nice to have***<br>• Comp TIA Security+ or CySA+<br>• AWS Certified Security – Specialty<br>• Wazuh, Elastic or Splunk vendor training<br>• GIAC certifications (GCIA, GCIH or GMON)<br>• Experience with file-integrity monitoring, vulnerability detection or PCI DSS dashboards inside a SIEM<br>***Details***<br>• Location: Makkah, Saudi Arabia — on-site<br>• Employment: full-time, permanent, start as soon as possible<br>• Reports to: the CEO & CISO<br>• Scope: Teslm's AWS environment and applications<br>• International candidates are welcome to apply.<br>***How to apply***<br>Apply via Linked In.

Senior Mechanical Engineer — Fit-Out Company: White Art Ltd Co. Location: Al Takhassusi, Riyadh<br>Role Overview Responsible for the design, coordination, and execution oversight of mechanical systems—including HVAC, plumbing, and fire protection—for commercial, retail, hospitality, office, and residential fit-out projects, from tendering through to handover.<br>Education & Certification Bachelor’s degree in Mechanical Engineering. Professional license or registration where required. Membership in a relevant engineering body, such as ASHRAE, ASME, or the Saudi Council of Engineers, is preferred.<br>Experience6–10+ years of experience in mechanical engineering, including at least 3–5 years in fit-out, interior construction, or MEP contracting. Proven experience in commercial, retail, hospitality, office, or residential fit-out projects. Experience coordinating with landlords, base-building consultants, and local authorities.<br>Technical Skills Strong knowledge of mechanical design standards, including ASHRAE, SMACNA, NFPA, and applicable Saudi codes. Experience in HVAC design, including duct sizing, air balancing, load calculations, chilled-water systems, and VRF systems. Strong knowledge of plumbing systems, including water supply and drainage. Experience with fire protection systems, including sprinklers, fire pumps, and standpipes. Familiarity with tenant HVAC connections to base-building systems. Proficiency in Auto CAD, Revit MEP, HAP/Carrier, or similar mechanical design software. Knowledge of energy-efficiency and green-building requirements is preferred. Understanding of Saudi authority approval processes, including Civil Defense and relevant utilities.<br>Project & Site Responsibilities Review and validate shop drawings, technical submittals, and material submissions. Coordinate with architects, interior designers, and other MEP disciplines to resolve clashes. Conduct site inspections, quality checks, testing, and snagging for mechanical works. Coordinate with subcontractors and vendors to ensure procurement and installation quality. Prepare BOQs and technical specifications and support tendering and estimation. Ensure compliance with project schedules, budgets, quality requirements, and HSE standards.<br>Soft Skills Strong coordination and communication skills across multidisciplinary teams. Ability to manage multiple projects simultaneously within tight fit-out schedules. Strong problem-solving skills for on-site technical issues. Leadership skills and the ability to mentor junior engineers and mechanical site staff.

We are looking for an experienced Project Management Engineer to join our team and oversee project, maintenance, and operational activities.<br>Key Responsibilities:<br>Plan and schedule maintenance and project activities Manage and follow up on work orders and technical teams Monitor performance and project progress Prepare daily, weekly, and monthly reports Coordinate with the Project Manager, consultants, and stakeholders Manage resource and material requirements Ensure effective execution of O&M activities<br>Requirements:<br>Bachelor’s Degree in Electrical or Mechanical Engineering Minimum 10 years of professional experience At least 5 years of relevant experience in maintenance and operations Valid Saudi Council of Engineers (SCE) accreditation Strong experience in Project Management and O&M contracts Proven experience managing multidisciplinary technical teams Knowledge of maintenance planning, scheduling, and digital asset management systems Strong leadership, communication, coordination, and reporting skills Excellent English communication skills Proficiency in Microsoft Office and relevant maintenance/project management software

Description<br><br>Tuwaiq Casting & Forging is seeking a detail-oriented and experienced QC Engineer to join the Quality Control Division. Reporting to the QC Manager, this role is responsible for ensuring that all casting and forging products meet internal quality standards and customer specifications through the implementation and maintenance of effective quality control processes. The QC Engineer plays a critical role in minimising defects, improving production efficiency, and ensuring compliance with applicable industry standards and certifications.<br><br>Quality Inspection & Control<br><br>Conduct inspections of castings and forgings in accordance with quality procedures and engineering drawings Drive the QC process across the casting shop in line with organisational procedures and expectations Control non-conforming products within the plant in accordance with the NCR procedure, including internal NCR management Prepare casting Inspection and Test Plans (ITPs) and product inspection plans for both internal and external requirements to ensure product quality Perform quality inspections on raw materials, in-process components, and finished products Record inspection results and analyse quality data to identify trends and issues Manage day-to-day inspection activities on the casting shop floor Liaise with third-party inspection agencies for inspections and related activities Ensure final product clearance in accordance with quality requirements.<br><br>Problem Solving & Continuous Improvement<br><br>Coordinate with the team on root cause analysis, corrective actions, and preventive actions Provide quality feedback to support the improvement of production processes.<br><br>Quality System Management<br><br>Maintain and improve quality management systems including ISO 9001 and API Q1Manage customer and third-party audits in coordination with the QA function.<br><br>Inspection Equipment Management<br><br>Manage calibration and maintenance of all inspection equipment Operate equipment to ensure measurement accuracy.<br><br>Requirements<br><br>Education<br><br>Bachelor's degree in Mechanical Engineering, Materials Science, Metallurgical Engineering, or a related field.<br><br>Experience<br><br>Minimum 5 years of experience in quality control within a manufacturing environment, preferably in the casting or forging industry Experience with API Q1, API 20A, and API 20B standards is essential.<br><br>Technical Skills<br><br>Proficiency in using inspection tools including calipers, micrometers, CMM, and ultrasonic testers Familiarity with quality inspection methods including visual inspection and NDEUnderstanding of metallurgical properties and heat treatment processes Exposure to ASTM, EN, API Q1, API 20A, and API 20B standards related to the casting and forging industry.<br><br>Certifications<br><br>NDE certification to ASNT or ISO 9712 Level IIQMS Internal Auditor certification.<br><br>Behavioral Competencies<br><br>Strong analytical thinking and problem-solving ability High attention to detail Effective communication skills.

Description<br><br>Tuwaiq Casting & Forging is seeking a technically competent and quality-driven QA Engineer to join the Quality Assurance Division. Reporting to the QA Manager, this role is responsible for supporting the implementation, maintenance, and continual improvement of the Quality Management System (QMS) to ensure that casting, forging, machining, heat treatment, welding repair, and final products comply with customer purchase orders, engineering specifications, internal procedures, and applicable international standards.<br><br>Key Responsibilities<br><br>Quality Management System Control<br><br>Implement and maintain the Quality Management System in accordance with ISO 9001, API Q1, API 20A, and API 20B requirements Prepare, review, and update procedures, work instructions, forms, and quality records Ensure effective document control and revision status across all departments Support internal audits and management review activities Promote continual improvement and risk-based thinking throughout the organization.<br><br>Production Process Quality Assurance<br><br>Monitor casting, forging, machining, heat treatment, and inspection activities for compliance with approved procedures Conduct process audits and identify gaps or deviations during manufacturing Ensure traceability of raw materials, heat numbers, batches, and finished products Support reduction of defects, scrap, rework, and process variation Verify implementation of Inspection and Test Plans (ITP) at all stages.<br><br>Standards & Technical Compliance<br><br>Ensure manufacturing activities comply with ASME, ASTM, API, ISO, and customer specifications Review purchase orders, drawings, datasheets, and technical requirements Maintain updated copies of applicable international codes and standards Coordinate technical clarifications with Engineering, QC, and Production teams Support qualification approvals, procedures, and product compliance documentation.<br><br>Supplier Quality & Non-Conformance Control<br><br>Participate in supplier qualification audits and periodic supplier evaluations Monitor supplier performance related to quality, certification, and delivery compliance Raise NCRs for internal and supplier-related non-conformities Support root cause analysis and implementation of corrective and preventive actions (CAPA) Ensure proper segregation, identification, and disposition of non-conforming products.<br><br>Reporting, Calibration & Cross-Functional Support<br><br>Coordinate calibration of measuring and testing equipment as per schedule Maintain accurate quality records, reports, KPIs, and management summaries Support customer audits, third-party audits, and certification assessments Coordinate with QC, Production, NDE, Lab, Warehouse, and Procurement teams on quality matters Conduct quality awareness training and promote a quality-focused culture.<br><br>Requirements<br><br>Education<br><br>Bachelor's degree in Mechanical Engineering, Metallurgical Engineering, Materials Engineering, Industrial Engineering, or a related discipline.<br><br>Experience<br><br>3–5 years of experience in QA within a foundry, forging, machining, valve, oil and gas, or heavy manufacturing environment Experience in QMS documentation, audits, and technical customer reviews is preferred.<br><br>Certifications & Knowledge<br><br>Knowledge of ISO 9001 and API Q1 systems; familiarity with API 20A and API 20B is preferred Internal Auditor or Lead Auditor certification is preferred Knowledge of ASME, ASTM, MSS, and EN standards is preferred.<br><br>Technical Skills<br><br>Root cause analysis and CAPA systems Data analysis and KPI reporting Knowledge of ERP, SAP, Oracle, or MES systems is preferred Strong report writing and documentation control.<br><br>Behavioral Competencies<br><br>Strong communication skills in English Leadership and cross-functional coordination ability Detail-oriented and disciplined with a strong analytical mindset Collaborative team player with a proactive attitude.

Required Qualifications & Experience:<br>Minimum 10 years of experience in electrical design and engineering, preferably in power plants, industrial, oil & gas, or EPC projects. Strong experience in Medium Voltage (MV) and Low Voltage (LV) electrical systems. Experience with MV/LV switchgear, transformers, MCCs, PCCs, distribution boards, and UPS systems. Good knowledge of electrical protection, coordination, and short-circuit calculations. Experience in preparation and review of:Single Line Diagrams (SLD) Load schedules Cable schedules Cable sizing and voltage-drop calculations Transformer and generator sizing Short-circuit calculations Protection coordination studies Earthing and lightning protection designs Lighting and small-power systems Electrical equipment specifications and datasheets Ability to review IFC drawings, vendor drawings, and technical submittals. Familiarity with international standards such as IEC, IEEE, NFPA, and NEC. Experience coordinating with civil, mechanical, instrumentation, and process disciplines. Good knowledge of electrical design software such as ETAP, Auto CAD, and/or EPLAN. Experience with FAT, SAT, testing, commissioning, and site technical support is preferred. Strong ability to coordinate with clients, consultants, vendors, and subcontractors. Good technical report writing and communication skills. Ability to work under pressure and meet project deadlines.<br>Preferred: Experience in power generation / gas turbine projects and Saudi Aramco/SEC or similar utility standards.<br>QUALIFICATIONS• Bachelor’s Degree in Electrical Engineering• Minimum 10 years of relevant electrical design & engineering experience• Strong knowledge of IEC, IEEE, NFPA and NEC standards• Proficiency in electrical design software such as ETAP, Auto CAD and/or EPLAN• Strong technical report writing and communication skills• Ability to coordinate effectively with clients, consultants, vendors and subcontractors• Ability to work under pressure and deliver within project deadlines

Job Description: Cost Control Engineer<br>We’re Hiring! We are seeking an experienced Cost Control Engineer to join our team for Saudi Aramco–approved and others Potential clients’ projects, ensuring high-quality construction, safety, and compliance with engineering standards.<br>Role Purpose<br>Responsible for monitoring and controlling project costs against approved budgets and providing timely forecasts and cost-performance information to project management.<br>Key Responsibilities<br>• Establish and maintain project cost-control structures.• Monitor budget, commitments, actual expenditures, and forecast costs.• Track purchase orders, subcontracts, manpower, equipment, and other project costs.• Prepare cost reports and forecasts.• Analyze budget variances and identify potential overruns.• Maintain cost-to-complete and Estimate at Completion (EAC).• Coordinate cost information with procurement, finance, planning, and project management.• Support change-order and variation cost assessments.• Support cash-flow and project financial forecasting.• Provide management with reliable cost-performance indicators.<br>Qualifications & Experience<br>• Bachelor’s Degree in Engineering, Quantity Surveying, Finance, or related discipline.• Minimum 5 years of project cost-control experience preferred.• EPC/construction background preferred. Technical Competencies• Cost budgeting and forecasting.• Commitments and actual-cost monitoring.• EAC/ETC.• Variance analysis.• Cash-flow forecasting.• Advanced Excel.• ERP/project-control systems experience is an advantage.<br>GENERAL RECRUITMENT REQUIREMENTSCandidates should demonstrate:<br>• Relevant academic/technical qualifications for the position.• Relevant industrial, construction, infrastructure, Oil & Gas, or EPC experience.• Good written and verbal communication skills.• Ability to work within multidisciplinary project teams.• Strong commitment to safety, quality, cost, and schedule.• Professional accountability and ability to work in a developing project organization.• Previous Saudi Arabia experience is preferred.• Familiarity with Saudi Aramco, SABIC, SEC, or other major Saudi industrial clients is an advantage where relevant to the position.<br>• English communication capability appropriate to the position. HEMAMCO reserves the right to assess candidates against project-specific client requirements, professional certifications, technical competencies, and relevant experience before final selection.

Main Duties:-Supporting the Lead Rolling Stock Engineer in project delivery by providing expert technical advice and support with regards to rolling stock to the wider project team Defining and developing interface specifications to support the supplier design Liaising with the project controls team to determine schedules and monitor design progress Establishing and maintaining adherence to project deliverables with respect to safety, quality, cost and schedule Analysing the rolling stock related RAMS performance against the client’s design specifications Analysing the rolling stock related operation and maintenance. Reviewing and approving the Design Build contractor’s rolling stock system and sub-system designs to ensure compliance with the client’s requirements Reviewing and monitoring the rolling stock design specifications and standards for all subsystems such as HVAC, door control, propulsion and control, auxiliary power, wiring, automatic train control (ATS), carbody, brakes, couplers ,gangway and bogies Overseeing the assessment of differing train configurations, passenger capacity, interface problems and performance quantifications Coordinating and monitoring the rolling stock related interfaces and integration with other disciplines such as platform screen doors, signaling, telecoms and power supply Conducting technical investigations or fault analyses Conducting site visit and inspections to verify and monitor rolling stock works quality and progress Ensuring all reporting requirements, are met and maintain accurate records concerning rolling stock related data.<br>Profile/Skills:-Mechanical / Electrical Engineering degree, diploma or professional qualification Minimum 12 years mechanical engineering work experience Experience of working on large, complex and multidisciplinary projects Current or recent broad knowledge of the rail industry Significant technical experience relevant to the design delivery of the mechanical aspects of rolling stock Demonstrable experience in the design of rolling stock Strong understanding of railway approvals, practices and standards including EN 50126, EN 50129, IEC 61133, IEC1287 and NFPA 130Strong understanding of railway approvals, practices and standards including UIC- 615, UIC-515, IEC 61133 and NFPA 130, EN12663,EN15827Railway interiors and paneling experience Working experience with Bombardier’s/Siemens rolling stock Chartered Engineer status Knowledge of rail communication concepts and principles Knowledge of overhead traction power reticulation systems Strong client-facing skills Excellent English language skills (written and verbal)