Mining engineer Jobs

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Signaling Engineer is responsible for ensuring the reliability, availability, and safety of railway signaling systems through effective maintenance strategies, fault analysis, and technical leadership. The role focuses on optimizing system performance in an operational railway environment.</p><p>Key Responsibilities</p><ul><li>Monitor and maintain signaling system performance.</li><li>L1&amp;L2 investigation of signaling failures and perform root cause analysis.</li><li>Perform and review maintenance procedures, checklists, and schedules.</li><li>Perform and supervise field maintenance activities.</li><li>Analyze system logs to identify faults.</li><li>Coordinate with traffic controller and maintenance teams during incidents and service disruptions.</li><li>Support emergency response and restoration activities (including shift/on-call if required).</li><li>Ensure compliance with safety standards, maintenance procedures, and regulatory requirements.</li><li>Identify improvement opportunities and propose technical solutions (modifications, upgrades).</li><li>Prepare technical reports, failure analysis reports, and performance dashboards.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree in one of the following: Electrical Engineering Electronics Engineering Computer Engineering Railway Engineering (preferred)</li><li>Saudi National (must).</li></ul><p></p></section>

Job Summary:The HSE Engineer supports the Company HSE Manager/Project HSE Manager to implement the HSE management system. The role assists in planning, implementation, evaluation and analyzing HSE activities at site to ensure HSE target and objectives are measured and achieved.<br>Job Responsibilities:Assist in the implementation of and compliance to the Project Health and Safety Management Plan (PHSP)and Project HSE Management Programme. Arrange, conduct and participates in training sessions, HSE Committee and Coordination Meetings. Advise supervisory Staff with regards to accident prevention and improvement related to work methods. Assist in leading and supervising HSE officers onsite. Monitor the execution of HSE activities on a project to ensure HSE requirements are met as per the project HSE plan and HSEMS requirement. Ensure that existing hazards, unsafe work conditions and /or practices are identified on a daily basis andobservation reports are raised and corrective measures are recorded. Ensure to address and report violation on daily basis and make necessary recommendations. Monitor timely reporting of project HSE performance Ensure achievement of HSE goals on project. Ensure that existing hazards, unsafe work conditions and /or practices are identified on a daily basis andobservation reports are raised and corrective measures are recorded. Ensure to address and report violation on daily basis and make necessary recommendations. Monitor timely reporting of project HSE performance Ensure achievement of HSE goals on project. Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies.<br>Education and Experience:Fresh Graduate are encouraged to apply! Bachelor's Degree in Engineering (Environmental and Civil Engineer)

???? Location: Madinah | Makkah | Jeddah<br>We are looking for a motivated Biomedical Engineer to join our team. If you have a passion for medical technology, strong technical skills, and enjoy working in a customer-focused environment, we'd love to hear from you.<br>Job Summary:The Biomedical Engineer will be responsible for providing technical support and field service for laboratory equipment, ensuring timely response to customer service requests and maximizing equipment uptime. The role includes equipment installation, preventive and corrective maintenance, troubleshooting, and maintaining high levels of customer satisfaction.<br>Key Responsibilities:Install, configure, and commission laboratory instruments according to technical specifications. Perform preventive maintenance, calibration, and routine inspections to ensure equipment reliability and accuracy. Diagnose and resolve technical issues efficiently to minimize equipment downtime. Carry out corrective maintenance and recommend preventive solutions to improve equipment performance. Provide technical support and basic user training to customers on the proper use of laboratory instruments. Maintain accurate service reports and documentation for all service activities. Ensure compliance with company procedures and quality standards. Stay up to date with the latest technologies and advancements in laboratory equipment.<br>Qualifications & Experience:Bachelor's degree in Biomedical Engineering or a related field. Valid registration with the Saudi Council of Engineers. Minimum 1 year of relevant experience. Experience with laboratory equipment is preferred. Basic networking knowledge. Strong analytical and troubleshooting skills. Excellent communication and interpersonal skills. Ability to work independently and manage multiple tasks efficiently.<br>Preferred Attributes:Detail-oriented with a strong commitment to quality. Customer-focused with a professional attitude. Adaptable and able to perform effectively in a dynamic work environment. Committed to ensuring equipment reliability and customer satisfaction.<br>Language Professional proficiency in English.

Job Summary:The HSE Engineer supports the Company HSE Manager/Project HSE Manager to implement the HSE management system. The role assists in planning, implementation, evaluation and analyzing HSE activities at site to ensure HSE target and objectives are measured and achieved.<br>Job Responsibilities:Assist in the implementation of and compliance to the Project Health and Safety Management Plan (PHSP)and Project HSE Management Programme. Arrange, conduct and participates in training sessions, HSE Committee and Coordination Meetings. Advise supervisory Staff with regards to accident prevention and improvement related to work methods. Assist in leading and supervising HSE officers onsite. Monitor the execution of HSE activities on a project to ensure HSE requirements are met as per the project HSE plan and HSEMS requirement. Ensure that existing hazards, unsafe work conditions and /or practices are identified on a daily basis andobservation reports are raised and corrective measures are recorded. Ensure to address and report violation on daily basis and make necessary recommendations. Monitor timely reporting of project HSE performance Ensure achievement of HSE goals on project. Ensure that existing hazards, unsafe work conditions and /or practices are identified on a daily basis andobservation reports are raised and corrective measures are recorded. Ensure to address and report violation on daily basis and make necessary recommendations. Monitor timely reporting of project HSE performance Ensure achievement of HSE goals on project. Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies.<br>Education and Experience:Fresh Graduate are encouraged to apply! Bachelor's Degree in Engineering (Environmental and Civil Engineer)

Product Engineer – Plastics & Tooling - Saudi - VISA and relocation package <br>We are looking for an experienced Product Engineer – Plastics & Tooling to lead the industrialisation of injection moulded components from concept through to production launch.<br>This is a key technical role focused on DFM, Moldflow simulation, tooling development, and production ramp-up, with strong exposure to international industrialisation projects across Saudi Arabia.<br>You will support the initial plant ramp-up in Eastern Saudi Arabia, followed by the transfer and scaling of processes to Western Saudi Arabia, working closely with engineering, suppliers, and manufacturing teams.<br>???? What you will do Lead industrialisation of plastic components from concept to SOPSupport plant ramp-up and stable production launch in Eastern Saudi Arabia Transfer and scale processes to Western Saudi Arabia Perform feasibility studies and DFM optimisation Run and interpret Moldflow simulations (fill, pack, warp) Define tooling concepts and manage tool development with suppliers Lead tool trials (T0–T2) and ensure production readiness Troubleshoot moulding and process issues during ramp-up Work closely with engineering, suppliers, quality, and manufacturing teams Support technical discussions with OEM / Tier 1 customers<br>???? What we are looking for Degree in Mechanical Engineering, Plastics Engineering, or similar Strong experience in injection moulding / plastics engineering Solid knowledge of DFM, Moldflow, and tooling development Experience with tooling suppliers and production ramp-up International or greenfield project experience is a plus Willingness to work on projects in Saudi Arabia (Eastern & Western regions) Hands-on, structured, and solution-oriented mindset<br>???? Why this role? You will play a key role in shaping industrialisation across two major production sites and be part of a highly technical, global engineering environment.

Antal is partnering with a world-leading global PMC organization involved in large-scale railway and infrastructure projects across the globe.<br>We are currently seeking a Electronics Engineer (Transportation Systems Signals) to lead and oversee activities within major transit projects.<br>Role: Electronics Engineer (Transportation Systems Signals) Location: Riyadh, KSABudget: SAR 20,000 - 30,000<br>Responsibilities:<br>• Review and validate signalling system designs, technical submittals, and interface documents to ensure compliance with contract requirements, safety standards, and operational performance criteria.• Coordinate signalling system integration across ATC/ATO, CBTC/communications systems, track circuits, switches/points, PSDs, rolling stock, and station systems to ensure seamless automated operations.• Support Testing & Commissioning activities including Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), system integration tests, dynamic tests, and trial running related to signalling performance and safety.• Assess signalling-related hazards, failure modes, and risk mitigation actions in alignment with RAMS, SIL requirements, and safety assurance obligations for transit systems.• Ensure signalling systems support operational requirements including headways, speed profiles, degraded modes, emergency functions, and system reliability expectations.• Coordinate closely with rolling stock, telecoms, power, track, OCC/TCC, and broader transit systems teams to resolve interface issues and ensure signalling readiness for revenue service.• Prepare technical reports, integration logs, risk assessments, and commissioning progress documentation in line with project reporting obligations.<br>Must Have:<br>• Bachelor’s degree in Electronics Engineering, Electrical Engineering, Systems Engineering, or a related discipline, with 15+ years of experience.• Extensive experience with railway signalling systems, ATC/ATO, CBTC technologies, or comparable transit signalling environments.• Strong understanding of signalling system integration across rolling stock, telecoms, platform screen doors, power supply, track, and OCC/TCC operations.• Familiarity with RAMS frameworks, SIL classifications, safety standards (e.g., EN 50126/50129), and signalling safety assurance requirements.

Irrigation Sales Engineer – Valves & Irrigation Systems We are looking for a motivated and technically skilled Irrigation Sales Engineer to join our growing team. The ideal candidate will have strong experience in irrigation systems, control valves, hydraulic solutions, and landscape/agriculture irrigation products, combined with excellent client-facing and sales capabilities.<br>Key Responsibilities Develop and maintain relationships with consultants, contractors, developers, and end users. Promote and sell irrigation systems, valves, pumps, controllers, and related solutions. Provide technical support and product recommendations based on project requirements. Review drawings, specifications, BOQs, and irrigation layouts. Prepare technical and commercial proposals, quotations, and presentations. Conduct site visits, client meetings, and product demonstrations. Coordinate with internal engineering and operations teams to ensure successful project execution. Identify new business opportunities and achieve sales targets. Support project submittals, approvals, and after-sales activities.<br>Requirements Bachelor’s degree in Agricultural Engineering, Irrigation Engineering, Mechanical Engineering, or related field.3+ years of experience in irrigation systems and technical sales. Strong knowledge of:Irrigation networks Control valves Drip & sprinkler systems Hydraulic calculations Pumps and filtration systems Irrigation controllers and automation Ability to read irrigation drawings and technical specifications. Strong communication, negotiation, and presentation skills. Valid driving license preferred.<br>Preferred Experience Experience working with landscape, agriculture, or infrastructure projects. Familiarity with major irrigation brands and valve manufacturers. Knowledge of the Saudi market and contractor/consultant network is a plus.<br>What We Offer Competitive salary package Career growth opportunities Supportive and professional work environment Exposure to large-scale irrigation and landscape projects<br>#hiring #salesengineer #irrigation #valves #landscape #agriculture #engineeringjobs #saudijobs #riyadh #technicalsales

Company Description SHURFAT REAL STATE DEVELOPMENT - شرفات التطوير العقاري is a growing real estate development company focused on delivering high-quality residential and commercial projects. The organization emphasizes effective planning, sound engineering practices, and attention to detail in every development. Team members collaborate closely across disciplines to ensure projects are completed safely, on time, and within budget. The company values professionalism, integrity, and technical excellence, offering opportunities for growth and development for engineering professionals.<br>Role Description The Site Civil Engineer is a full-time, on-site role based in Jeddah, responsible for overseeing civil works on development projects from execution through completion. The role includes supervising construction activities, ensuring compliance with approved drawings, specifications, and local regulations, and coordinating with contractors, consultants, and internal project teams. Daily tasks involve reviewing and interpreting civil engineering designs, monitoring quality and safety on site, preparing progress reports, resolving technical issues, and supporting planning and scheduling of site activities. The Site Civil Engineer will also participate in inspections, verify materials and workmanship, and provide technical input to optimize stormwater management, infrastructure layouts, and site utilities.<br>Qualifications<br> Strong foundation in Civil Engineering and Civil Engineering Design, with the ability to interpret technical drawings and specifications. Experience working as part of Civil Engineers teams, contributing to multidisciplinary project coordination and site problem-solving. Skills in Planning and project scheduling for site activities, including resource allocation and progress tracking. Knowledge of Stormwater Management principles and infrastructure design, including drainage systems and site grading. Bachelor’s degree in Civil Engineering or a closely related field. Previous site engineering experience in real estate development, infrastructure, or construction projects, preferably in Jeddah or the wider region. Familiarity with local building codes, standards, and permitting processes. Proficiency in relevant engineering and design software (e.g., Auto CAD, civil design tools) and basic office productivity tools. Strong communication and reporting skills, with the ability to collaborate effectively with contractors, consultants, and internal stakeholders. Commitment to safety standards, quality control, and ethical professional practice on construction sites.

Company Description Hydrotech Engineering Services KSA is a technology-driven hydraulic solutions company established in the Kingdom of Saudi Arabia. The head office is based in Dammam, with branches across the Eastern Province, providing trading and services for a comprehensive range of pneumatic and hydraulic products. These offerings are supported by experienced engineers and technicians who emphasize innovation and customized solutions. The company is powered by a strong focus on fluid technology and is committed to delivering reliable, tailored support to industrial clients. Hydrotech values collaboration, technical excellence, and a service-oriented mindset across its team. Role Description The Sales Engineer will work full time on-site in Jeddah, supporting customers with hydraulic and pneumatic product solutions. Responsibilities include identifying customer needs, preparing technical and commercial proposals, delivering product presentations, and participating in negotiations to close sales. The role involves providing pre- and post-sales technical support, coordinating with engineering and service teams, and maintaining long-term customer relationships. The Sales Engineer will also monitor market trends, gather feedback, and contribute to sales forecasts and planning. Daily activities include visiting client sites, responding to inquiries, and ensuring that solutions align with Hydrotech’s standards for quality and innovation. Qualifications Strong skills in Sales Engineering and Technical Support to understand customer requirements and propose suitable hydraulic and pneumatic solutions. Proficiency in Sales and Customer Service to build relationships, manage accounts, and maintain a high level of client satisfaction. Effective Communication skills, including clear verbal and written communication in professional settings. Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Industrial Engineering, or a related technical field. Experience in hydraulic or pneumatic systems, components, or industrial equipment is highly beneficial. Ability to read technical drawings, specifications, and use relevant engineering tools or software. Strong problem-solving, organizational, and time management skills, with the ability to work independently and in cross-functional teams. Willingness to travel locally for customer visits and site meetings; valid driver’s license preferred.

Position Summary:<br>The Electrical Engineer will be responsible for designing, implementing, testing, and maintaining electrical, fire & security, and automation systems. The role includes ensuring system performance, reliability, compliance with applicable standards, and supporting installation, commissioning, troubleshooting, and ongoing technical improvements.*Saudi nationals are encouraged to apply.<br>Main Responsibilities:<br>Design, engineer, and oversee the installation of electrical, fire alarm, fire suppression, access control, intrusion detection, and automation systems for new projects, upgrades, and system expansions. Develop and maintain detailed electrical drawings, system schematics, technical specifications, and documentation to support installation, commissioning, operation, and maintenance activities. Collaborate with project management, operations, commissioning, and facility management teams to ensure the integration of electrical, fire protection, security, and automation systems. Monitor system performance, identify technical issues, and troubleshoot electrical, fire protection, security, and automation system faults. Ensure all electrical, fire protection, security, and automation systems comply with applicable safety codes, engineering standards, regulatory requirements, and company procedures. Comply with all relevant safety, quality, health, and environmental procedures to maintain a safe and efficient working environment. Stay up to date with advancements in electrical engineering, fire protection, security technologies, automation systems, and industry best practices.<br>Requirements:<br>Bachelor’s degree in electrical engineering or mechanical engineering. Minimum 2 years of experience in electrical engineering, preferably involving fire protection, security systems, automation, or industrial/building electrical systems. Registered with the Saudi Council of Engineers (SCE). Good understanding of electrical systems, fire alarm, fire suppression, access control, intrusion detection, and automation system principles. Familiarity with PLCs, building automation systems, industrial communication networks, electrical distribution, and control systems. Strong problem-solving, analytical, and troubleshooting skills to diagnose and resolve technical issues. Ability to perform electrical engineering calculations, including load calculations, voltage drop analysis, and equipment sizing. Proficient in engineering software such as Auto CAD. Strong communication and interpersonal skills with the ability to work effectively in a dynamic, fast-paced environment and collaborate with teams.

Job Title: Senior Geotechnical Engineer Location: Saudi Arabia (Jeddah) Company: SBU of Abunayyan Holding Company Industry: Solar Energy | Renewable Energy | Utility-Scale Infrastructure | Engineering About the Role We are looking for an experienced Senior Geotechnical Engineer to join our Engineering team and support the successful delivery of utility-scale Solar PV and infrastructure projects. The successful candidate will lead geotechnical investigations, foundation design, corrosion assessments, and construction support while working closely with Engineering, Project Management, Sales, Supply Chain, and global technical teams. Key Responsibilities Lead the review and interpretation of geotechnical investigation reports and site soil data. Analyze soil and rock conditions to determine geotechnical design parameters. Design and review shallow and deep foundation systems, including pile foundations, for utility-scale projects. Perform foundation analysis using L. PILE and other engineering software. Conduct corrosion assessments and recommend suitable foundation and steel pile protection systems. Prepare and review geotechnical and foundation design reports in accordance with international standards. Review pile load testing methodologies, witness testing activities, and validate test results. Collaborate with Engineering, Supply Chain, Project Management, and global technical teams to optimize foundation designs. Support value engineering initiatives to improve project cost, constructability, and performance. Provide technical guidance to junior engineers and support construction teams by resolving geotechnical issues during project execution. Participate in technical discussions with clients, consultants, and contractors throughout the project lifecycle. Qualifications Bachelors / Master's Degree in Geotechnical Engineering or a related discipline.5–10 years of experience in geotechnical engineering and foundation design. Experience in renewable energy, utility-scale infrastructure, or industrial projects. Technical Skills Geotechnical Investigation & Site Assessment Soil Mechanics & Foundation Engineering Shallow & Deep Foundation Design Pile Foundation Design Pile Load Testing & Interpretation Corrosion Assessment L. PILE Software SPT, CPT & DCPT Interpretation Settlement & Bearing Capacity Analysis International Geotechnical Design Standards STAAD. Pro, RISA, or other FEM software (Preferred) VBA or Python (Preferred) Core Competencies Technical Leadership Analytical & Problem-Solving Skills Engineering Design Excellence

We are seeking an experienced Senior Geotechnical Engineer with a strong background in design for major railway projects. The ideal candidate will possess at least 15 years of progressive experience in geotechnical engineering, have in-depth knowledge of ground investigation, soil and rock mechanics, and hold a track record of delivering successful rail or infrastructure projects in the Middle East, with preference given to experience within Saudi Arabia.<br>Responsibilities<br>Lead the geotechnical design for large-scale railway infrastructure projects, ensuring design meets international standards and local regulatory requirements. Conduct and supervise site investigations, soil and rock testing, and laboratory analysis. Interpret geotechnical data and prepare clear, comprehensive technical reports and design documents. Oversee and review the work of junior engineers and external consultants. Collaborate with multidisciplinary design teams including structural, civil, and environmental engineers. Provide technical leadership during all project phases, from feasibility to detailed design and construction. Liaise with clients, contractors, and local authorities, presenting findings and recommendations. Ensure all work complies with health, safety, and environmental regulations. Provide geotechnical input for construction methodologies, ground risk assessments, and value engineering. Stay updated with advances in geotechnical engineering and relevant railway standards, especially those applicable in the Saudi and broader Middle East context.<br><br>Qualifications and Experience Bachelor’s degree in Civil or Geotechnical Engineering (Master’s degree preferred). Minimum 15 years of relevant experience, with at least 5 years on railway or major infrastructure projects. Extensive hands-on design experience, including deep foundations, embankments, retaining structures, ground improvement, and tunneling. Proven track record of managing large, complex geotechnical design packages. Direct experience on Middle East projects essential; Saudi Arabia experience highly advantageous. Working knowledge of local geotechnical standards, railway codes, and environmental regulations. Proficiency in geotechnical analysis and design software (e.g., PLAXIS, Geo Studio, g INT, Slope/W). Excellent written and verbal communication skills in English. Arabic language skills are a plus. Chartered Engineer (CEng, PE, or equivalent) status preferred Strong leadership and client-facing abilities. Adaptability to multicultural, multidisciplinary environments. Demonstrated experience in delivering projects within fast-paced, schedule-driven contexts.

Company Description:- Ammico is a geotechnical specialist contracting company focused on foundation engineering and marine works for complex civil infrastructure projects. Its services include diaphragm wall design and installation, piling works, dewatering, deep excavation, earthworks, jet grouting, soil mixing, soil improvement, and earth retention systems. Ammico is also involved in marine works such as marine piling, jetties, revetments, and breakwaters. With over 45 years of experience, the company operates from offices in Qatar, Saudi Arabia, and the UAE, offering stable, long-term opportunities in a technically advanced environment.<br>Role Description:- The Senior QA/QC Engineer (Civil) is a full-time, on-site role based in the Kingdon of Saudi Araia, responsible for overseeing quality standards across geotechnical and foundation engineering projects. Daily tasks include developing and implementing project-specific QA/QC plans, monitoring compliance with specifications and standards, and conducting inspections and tests on materials, structures, and site activities. The role involves reviewing drawings and method statements, coordinating with project managers, site engineers, and subcontractors to resolve quality issues, and maintaining detailed documentation and reports for audits and client requirements. <br>Qualifications Bachelor’s degree in Civil Engineering or a related discipline; advanced certifications in QA/QC or quality management are an advantage. Minimum 10 years of experience in piling, shoring, and ground engineering works. Solid background in Quality Assurance and Quality Management systems, including developing and implementing QA/QC procedures. Proven experience in foundation engineering, geotechnical works, preferably in the GCC region. Strong knowledge of international and regional standards and codes relevant to civil and geotechnical engineering. Effective communication, reporting, and coordination skills, with the ability to work in multidisciplinary project environments. Proficiency in using common engineering and QA/QC tools (e.g., MS Office, quality reporting software); familiarity with construction management systems is beneficial. Ability to lead and mentor project teams, manage multiple priorities, and uphold safety and quality culture on site. Please send your updated CV to rizwan.imtiaz@ammico.biz with the subject line:Application – Senior QA/QC Engineer (Civil)<br>#Piling #Foundation # Geotechnical #Trevi #Golden Triangle #Jet Grouting

Position Summary:<br>The Electrical Engineer will be responsible for designing, implementing, testing, and maintaining electrical, fire & security, and automation systems. The role includes ensuring system performance, reliability, compliance with applicable standards, and supporting installation, commissioning, troubleshooting, and ongoing technical improvements.*Saudi nationals are encouraged to apply.<br>Main Responsibilities:<br>Design, engineer, and oversee the installation of electrical, fire alarm, fire suppression, access control, intrusion detection, and automation systems for new projects, upgrades, and system expansions. Develop and maintain detailed electrical drawings, system schematics, technical specifications, and documentation to support installation, commissioning, operation, and maintenance activities. Collaborate with project management, operations, commissioning, and facility management teams to ensure the integration of electrical, fire protection, security, and automation systems. Monitor system performance, identify technical issues, and troubleshoot electrical, fire protection, security, and automation system faults. Ensure all electrical, fire protection, security, and automation systems comply with applicable safety codes, engineering standards, regulatory requirements, and company procedures. Comply with all relevant safety, quality, health, and environmental procedures to maintain a safe and efficient working environment. Stay up to date with advancements in electrical engineering, fire protection, security technologies, automation systems, and industry best practices.<br>Requirements:<br>Bachelor’s degree in electrical engineering or mechanical engineering. Minimum 2 years of experience in electrical engineering, preferably involving fire protection, security systems, automation, or industrial/building electrical systems. Registered with the Saudi Council of Engineers (SCE). Good understanding of electrical systems, fire alarm, fire suppression, access control, intrusion detection, and automation system principles. Familiarity with PLCs, building automation systems, industrial communication networks, electrical distribution, and control systems. Strong problem-solving, analytical, and troubleshooting skills to diagnose and resolve technical issues. Ability to perform electrical engineering calculations, including load calculations, voltage drop analysis, and equipment sizing. Proficient in engineering software such as Auto CAD. Strong communication and interpersonal skills with the ability to work effectively in a dynamic, fast-paced environment and collaborate with teams.

Company Description Westeel Metal Industries (WMI) specializes in quality steel products tailored for diverse industrial applications. The company combines precision engineering with superior materials to deliver durable and reliable steel solutions that meet specific client requirements. With a strong legacy in fabrication and welding, WMI is recognized for steelworks that perform under demanding conditions and stand the test of time. A commitment to excellence and customer satisfaction drives continuous improvement in product quality, service, and engineering capabilities.<br>Role Description The Steel Structure Design Engineer is a full-time, on-site role based in Dammam. This role involves designing steel structures and components, preparing detailed engineering drawings and specifications, and ensuring compliance with relevant codes and standards. The engineer collaborates with project managers, fabrication teams, and other engineers to optimize designs for manufacturability, safety, and cost efficiency. Daily tasks include performing structural calculations, using STAAD, TEKLA & CAD software for modeling and detailing, reviewing shop drawings, and supporting quality assurance during fabrication and installation. The role also includes contributing to design reviews, resolving technical issues, and maintaining accurate documentation throughout the project lifecycle.<br>Qualifications Strong foundation in Structural, Civil, or, Mechanical Engineering or related Design Engineering disciplines, with the ability to apply engineering principles to steel structures. Proficiency in steel structures & PEB design. Proficiency in STAAD for steel structures designs. Basic Knowledge of TEKLA software. Proficiency in Computer-Aided Design (CAD) tools for 2D drafting and 3D modeling of steel structures and components. Experience in Product Design for industrial or structural applications, focusing on durability, safety, and manufacturability. Bachelor’s degree in Mechanical Engineering, Structural Engineering, or a closely related field; professional certification or registration is an advantage. Knowledge of relevant international and local steel design codes and standards, and familiarity with fabrication and welding practices. Ability to interpret technical drawings, perform structural calculations, and use engineering software for analysis and design. Effective communication skills, ability to work collaboratively with cross-functional teams, and strong attention to detail and safety. Prior experience in steel fabrication, construction, or industrial projects in a similar role is highly beneficial.

Company Description Westeel Metal Industries (WMI) specializes in quality steel products tailored for diverse industrial applications. The company combines precision engineering with superior materials to deliver durable and reliable steel solutions that meet specific client requirements. With a strong legacy in fabrication and welding, WMI is recognized for steelworks that perform under demanding conditions and stand the test of time. A commitment to excellence and customer satisfaction drives continuous improvement in product quality, service, and engineering capabilities.<br>Role Description The Steel Structure Design Engineer is a full-time, on-site role based in Dammam. This role involves designing steel structures and components, preparing detailed engineering drawings and specifications, and ensuring compliance with relevant codes and standards. The engineer collaborates with project managers, fabrication teams, and other engineers to optimize designs for manufacturability, safety, and cost efficiency. Daily tasks include performing structural calculations, using STAAD, TEKLA & CAD software for modeling and detailing, reviewing shop drawings, and supporting quality assurance during fabrication and installation. The role also includes contributing to design reviews, resolving technical issues, and maintaining accurate documentation throughout the project lifecycle.<br>Qualifications Strong foundation in Structural, Civil, or, Mechanical Engineering or related Design Engineering disciplines, with the ability to apply engineering principles to steel structures. Proficiency in steel structures & PEB design. Proficiency in STAAD for steel structures designs. Basic Knowledge of TEKLA software. Proficiency in Computer-Aided Design (CAD) tools for 2D drafting and 3D modeling of steel structures and components. Experience in Product Design for industrial or structural applications, focusing on durability, safety, and manufacturability. Bachelor’s degree in Mechanical Engineering, Structural Engineering, or a closely related field; professional certification or registration is an advantage. Knowledge of relevant international and local steel design codes and standards, and familiarity with fabrication and welding practices. Ability to interpret technical drawings, perform structural calculations, and use engineering software for analysis and design. Effective communication skills, ability to work collaboratively with cross-functional teams, and strong attention to detail and safety. Prior experience in steel fabrication, construction, or industrial projects in a similar role is highly beneficial.

Role Overview Khidmah is seeking a Senior Estimation & Procurement Engineer in Facilities Management to oversee end-to-end bidding, pricing, and vendor sourcing under tight deadlines.<br>Key Responsibilities<br>Estimation & Bidding: Review comprehensive tender documents (RFPs, BOQs, technical drawings, SLAs, and KPIs) to prepare accurate cost estimates, pricing schedules, commercial reports, and formal submissions. Support pre-bid meetings, site visits, value engineering, and post-tender clarifications.<br>Procurement & Negotiation: Issue RFQs, evaluate quotes for materials, equipment, and subcontracts, and negotiate prices, scopes of work, and delivery timelines to secure competitive commercial value.<br>Project Mobilization & Operations: Manage operational readiness for winning contracts by organizing manpower, materials, equipment, and logistics to ensure smooth project commencement.<br>Risk & Governance: Identify commercial/operational risks during bidding, document qualifications and exclusions, maintain pricing models and trackers for audit trails, and strictly adhere to HSE and Information Security standards.<br>Key Requirements<br>Education: Bachelor’s Degree in Electrical, Mechanical, or a related Engineering discipline.<br>Experience: 5 to 7 years in the Facilities Management industry, with at least 3 to 5 years directly focused on Estimation & Procurement.<br>Core Competencies: Expertise in FM operations, commercial risk assessment, contract documentation, and multi-tender management under strict timelines.

Avensys is a reputed global IT professional services company headquartered in Singapore. Our service spectrum includes enterprise solution consulting, business intelligence, business process automation and managed services. Given our decade of success, we have evolved to become one of the top trusted providers in Singapore and service a client base across banking and financial services, insurance, information technology, healthcare, retail and supply chain.<br>We are currently looking to hire for an "IT Deskside Support Engineer- 12 months contract "Location: Riyadh, Saudi Arabia Email - hanin@aven-sys.com<br>Job Summary:- IT Deskside Support Engineer- 12 months contract A Deskside Engineer provides on-site, hands-on IT support to end users. The role focuses on resolving hardware, software, and peripheral issues that cannot be handled remotely by the service desk, ensuring a smooth and productive end-user experience.<br>Responsibilities：Provide on-site Level 2 deskside support for end users, including desktops, laptops, monitors, printers, and peripherals Diagnose, troubleshoot, and resolve hardware and software issues in a timely and professional manner Perform IMACD activities (Install, Move, Add, Change, De-install) for end-user devices Support OS installation, reimaging, encryption, driver installation, and application deployment Handle incident and service request tickets via the ITSM/ticketing system and provide regular status updates to users<br><br>Technical Skill:Strong knowledge of: Windows OS (Windows 10/11), Office productivity tools, Desktop/laptop hardware and peripherals Hands-on experience with: Device imaging and deployment tools (e.g., SCCM / endpoint tools) and Active Directory basics (join domain, user/group support)<br> Soft Skills & Competencies Strong analytical and problem-solving abilities Effective communication with technical and non-technical stakeholders Ability to prioritize and manage multiple tasks in a fast-paced environment<br><br>Education:Bachelor’s degree in IT, Computer Science, or related field <br>WHAT’S ON OFFERYou will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression. To submit your application, please apply online or email your UPDATED CV in Microsoft Word format to hanin@aven-sys.com. Your interest will be treated with strict confidentiality. CONSULTANT DETAILSConsultant Name: hanin Avensys Consulting Pte Ltd EA Licence 12C5759Privacy Statement: Data collected will be used for recruitment purposes only. Personal data provided will be used strictly in accordance with the relevant data protection law and Avensys' personal information and privacy

Client is seeking a skilled and proactive Network Engineer with a minimum of 5 years of experience in designing, implementing, managing, and troubleshooting enterprise network infrastructure. The ideal candidate will have strong expertise in LAN/WAN technologies, routing and switching, firewalls, VPNs, wireless networking, and network security. The successful candidate will ensure high availability, optimal performance, and security of the organization's network infrastructure while supporting business continuity and future scalability.<br>Key Responsibilities:Design, implement, configure, and maintain enterprise network infrastructure. Install, configure, and support routers, switches, firewalls, wireless controllers, and access points. Monitor network performance and proactively identify and resolve issues. Configure and troubleshoot LAN, WAN, WLAN, VPN, and SD-WAN environments. Manage network security devices, firewall policies, and access control lists (ACLs). Ensure high availability through redundancy, failover, and disaster recovery solutions. Monitor bandwidth utilization and perform capacity planning. Perform firmware upgrades, patching, and preventive maintenance of network devices. Configure and manage VLANs, routing protocols, and switching technologies. Troubleshoot complex network connectivity and performance issues. Work with Internet Service Providers (ISPs), telecom vendors, and third-party service providers. Maintain accurate network diagrams, configurations, and technical documentation. Implement network monitoring and alerting solutions. Support cloud connectivity, remote access, and hybrid network environments. Participate in infrastructure projects, technology upgrades, and network expansion initiatives. Ensure compliance with organizational security standards and industry best practices.<br>Required Qualifications:Bachelor's degree in Computer Science, Information Technology, Electronics, Telecommunications, or a related field. Minimum 5 years of hands-on experience in enterprise network administration and engineering. Strong understanding of TCP/IP networking concepts and network architecture. Experience managing medium to large enterprise networks. Excellent troubleshooting, analytical, and communication skills.<br>Required Technical Skills<br>Networking LAN/WAN Technologies TCP/IPIPv4 & IPv6Routing & Switching VLANsSTP/RSTPOSPFBGPEIGRPNATDHCPDNS<br>Network Security Firewalls VPN (IPSec & SSL) ACLsNetwork Segmentation IDS/IPSNetwork Access Control (NAC) Multi-Factor Authentication (MFA)<br>Wireless Networking Enterprise Wi-FiWireless Controllers Access Point Deployment RF Optimization Wireless Security<br>Network Monitoring & Management Solar Winds PRTGZabbix Nagios Wireshark SNMPNet Flow<br>Vendors Experience with one or more of the following:Cisco Juniper Fortinet Aruba Palo Alto Networks HPE Networking<br>Cloud Networking (Preferred) Microsoft Azure Amazon Web Services (AWS) Google Cloud Platform (GCP)<br>Operating Systems Windows Server Linux<br>Automation (Preferred) Python Power Shell Ansible<br>Preferred Certifications:Candidates with one or more of the following certifications will have an advantage:Cisco Certified Network Professional (CCNP) Cisco Certified Network Associate (CCNA) Fortinet NSE Certification Palo Alto Networks Certified Network Security Engineer (PCNSE) Juniper Networks Certified Professional (JNCIP) Aruba Certified Professional AWS Certified Advanced Networking – Specialty Microsoft Azure Network Engineer Associate (AZ-700)

Job Title: Asphalt Plant Electrical Engineer Department/Section: Asphalt Production Location: Qiddiya Direct Manager: Asphalt Plant Maintenance Manager Availability : Immediately ( Required )<br>Job Purpose:The Electrical Engineer is responsible for ensuring the safe, reliable, and efficient operation of all electrical, instrumentation, automation, and control systems associated with the asphalt plant and its supporting facilities. The role includes preventive, predictive, and corrective maintenance of electrical equipment, troubleshooting plant breakdowns, managing electrical projects, ensuring statutory compliance, and maintaining electrical infrastructure across the entire plant premises.<br>The Electrical Engineer shall ensure maximum plant availability while complying with electrical safety regulations and company maintenance standards.<br><br>Key Responsibilities:<br>Ensure safe, reliable, and uninterrupted operation of all electrical, instrumentation, and automation systems of the asphalt plant. Perform preventive, predictive, and corrective maintenance of electrical equipment to maximize plant availability. Diagnose and rectify electrical, PLC, VFD, instrumentation, and control system faults with minimum downtime. Maintain all plant electrical assets, including motors, MCCs, transformers, switchgear, generators, lighting, and distribution systems. Oversee electrical maintenance of all plant premises, including offices, workshops, warehouses, security cabins, utilities, and external lighting. Maintain and calibrate field instruments, sensors, load cells, temperature, pressure, and weighing systems. Execute planned shutdown maintenance, equipment installation, commissioning, and electrical modification projects. Monitor power consumption, power factor, electrical load distribution, and recommend energy saving initiatives. Ensure compliance with electrical safety standards, LOTO procedures, statutory regulations, and company HSE policies. Prepare and maintain electrical drawings, preventive maintenance schedules, equipment history, calibration records, and technical documentation. Manage electrical spare parts inventory, recommend stock levels, and support procurement activities. Support the installation, testing, commissioning, and successful start-up of new asphalt plant equipment, electrical systems, and automation controls, when required. Supervise electrical technicians and contractors, ensuring work quality, safety, and timely completion. Conduct root cause analysis of electrical failures and implements corrective and preventive actions. Support production teams by ensuring high equipment reliability and continuous plant operation. Participate in continuous improvement initiatives to enhance plant performance, reliability, and operational efficiency.<br>Qualifications <br>Diploma or bachelor’s degree in electrical engineering or equivalent.<br>Experience & Skills:Minimum 5+ years' experience in asphalt plant and road construction industry Working knowledge of plant operations. Familiarity with OSHA and other workplace safety regulations and precautions. Reporting and documentation skills/ Communication and coordination skills & Computer skills Analytical and problem-solving skills.