Mechanical Design Engineer Jobs in Saudi

<h2><strong>Key Responsibilities</strong></h2><ul><li><p>Lead design and technical review of electrical distribution systems (LV/MV networks, load calculations, cable sizing, single-line and schematic diagrams)</p></li><li><p>Approve specifications and supervise installation/testing of electrical panels, DBs, and MCC (Motor Control Center) panels</p></li><li><p>Own the technical strategy for light current/ELV systems: fire alarm, CCTV, access control, structured cabling, PA, and integration with BMS</p></li><li><p>Lead BMS design, integration, and commissioning across electrical, mechanical, and fire systems for centralized building control</p></li><li><p>Review and approve shop drawings, material submittals, and vendor technical proposals</p></li><li><p>Lead site inspections, factory acceptance tests (FAT), site acceptance tests (SAT), and full system commissioning</p></li><li><p>Ensure full compliance with codes (IEC, NEC, NFPA, or local authority standards) and safety regulations across the project</p></li><li><p>Act as primary technical point of contact with clients, consultants, and contractors on electrical/ELV matters</p></li><li><p>Review and validate BOQs, cost estimates, and value engineering proposals for the electrical scope</p></li><li><p>Manage risk, troubleshoot complex technical issues, and drive resolution during construction and handover</p></li><li><p>Support tendering, proposal development, and technical clarifications during bidding stages</p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p>Bachelor's degree in Electrical Engineering.</p></li><li><p>5-8 years of experience in MEP projects, with proven experience leading electrical scope on large-scale developments</p></li><li><p>Deep expertise in electrical distribution, panels, MCCs, and light current/ELV systems</p></li><li><p>Strong working knowledge of BMS platforms, protocols (BACnet, Modbus, etc.), and system integration</p></li><li><p>Advanced proficiency in AutoCAD, Revit MEP, and relevant design/simulation/load calculation software</p></li><li><p>Thorough command of applicable codes and standards (IEC, NFPA, local authority requirements)</p></li><li><p>Demonstrated leadership in managing engineering teams and coordinating multidisciplinary project stakeholders</p></li><li><p>Excellent communication, negotiation, and client-facing skills in English (and Arabic, if regionally relevant)</p></li></ul><p></p>

<ul><li><p>Develop, implement, and maintain the MEP Quality Management System in line with ISO 9001 and project requirements</p></li><li><p>Prepare and control project quality plans, procedures, ITPs, and checklists for all MEP disciplines</p></li><li><p>Ensure effective document control and quality records management</p></li></ul><ul><li><p>Oversee QA/QC activities for HVAC, plumbing, firefighting, electrical, ELV, and associated MEP systems</p></li><li><p>Review and approve method statements, material submittals, and technical documentation</p></li><li><p>Ensure inspections and tests are carried out as per approved Inspection & Test Plans (ITPs)</p></li></ul><ul><li><p>Coordinate and witness inspections, testing, and commissioning activities with consultants and clients</p></li><li><p>Manage non-conformance reports (NCRs), corrective actions, and preventive actions</p></li><li><p>Conduct internal quality audits and site quality inspections</p></li></ul><ul><li><p>Ensure compliance with contract specifications, drawings, authority requirements, and international standards</p></li><li><p>Monitor adherence to approved codes and standards (ASHRAE, NFPA, IEC, BS, local regulations)</p></li><li><p>Support authority approvals and final certification processes</p></li></ul><ul><li><p>Coordinate QA/QC matters with project managers, construction managers, engineers, and subcontractors</p></li><li><p>Act as the main point of contact for consultants and clients on MEP quality-related issues</p></li><li><p>Lead quality meetings and provide guidance on quality expectations</p></li></ul><ul><li><p>Ensure timely preparation and submission of as-built drawings, test reports, and O&M manuals</p></li><li><p>Support final inspections, snag clearance, and system handover</p></li><li><p>Maintain quality records for final acceptance and project closeout</p></li></ul><ul><li><p>Provide training and awareness sessions on quality procedures and standards</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s Degree in Mechanical or Electrical Engineering</p></li><li><p>15–18 years of experience in QA/QC for MEP construction</p></li><li><p>Strong knowledge of MEP systems, testing, commissioning, and quality standards</p></li></ul><ul><li><p>In-depth knowledge of QA/QC systems and ISO standards</p></li><li><p>Excellent documentation, reporting, and audit skills</p></li><li><p>Strong communication, coordination, and leadership abilities</p></li></ul>

Awtad is seeking a dedicated and proactive Safety Technician to join our team. In this role, you will support the implementation and monitoring of workplace safety programs to ensure compliance with health and safety regulations. You will assist in conducting safety inspections, identifying hazards, and promoting a culture of safety throughout the organization.<br><br>Responsibilities<br><br>Conduct regular safety inspections and audits to identify potential hazards and ensure compliance with safety standards Assist in the development and implementation of safety policies and procedures Report and document safety incidents, accidents, and near-misses Provide safety training and awareness sessions to employees Investigate safety incidents and recommend corrective actions Monitor compliance with safety regulations and standards Maintain safety equipment and ensure proper use and maintenance Collaborate with management to promote a culture of safety throughout the organization<br><br>Requirements<br><br>Technical diploma or degree in Occupational Health and Safety or a related field Relevant practical training in workplace safety and basic knowledge of safety practices Experience monitoring high-risk activities including electrical work, hot work, working at heights, mechanical maintenance, and lifting and material handling operations Experience ensuring proper use of personal protective equipment (PPE) Proficiency with safety management software and tools NEBOSH and OSHA certifications are required, along with Saudi Council of Engineers (SCE) accreditation as a Technician Professional proficiency in Arabic and English Saudi national Experience monitoring Permit to Work (PTW) activities is a plus Experience assisting with risk assessments and Job Safety Analysis (JSA) is a plus Experience working with maintenance teams and ensuring employee and contractor compliance with safety procedures is a plus<br><br>Benefits<br><br>Private Health Insurance Paid Time Off Training & Development

Project Manager – Facilities Management<br>About the Role ESOM is seeking an experienced Project Manager – Facilities Management to lead the delivery of integrated facilities management services across a medium-to-large project. The Project Manager will be responsible for overall project operations, contract performance, budget control, workforce management, client satisfaction, SLA compliance, risk management, and the effective delivery of both hard and soft FM services. The position may oversee a workforce of approximately 200–450 employees.<br>Key Responsibilities Lead the day-to-day delivery of hard and soft facilities management services. Manage the project contract, operational budget, revenue, costs, expenditure, and financial performance. Ensure compliance with contractual SLAs, KPIs, quality standards, safety requirements, and government regulations. Lead multidisciplinary teams, including engineers, supervisors, technicians, cleaners, and support-service personnel. Maintain strong client relationships, address operational concerns, and improve customer satisfaction. Manage project risks, contingency plans, resource allocation, procurement requirements, and vendor performance. Review operational reports, audits, workforce plans, and performance results to identify improvement opportunities. Drive process improvement, digitalization, sustainability, and operational efficiency initiatives.<br>Qualifications and Experience Bachelor’s degree in Mechanical, Electrical, or Civil Engineering. Minimum 10 years of experience in facilities management, operations, and maintenance. Proven experience managing a large FM project in a leadership or managerial capacity. Strong understanding of both hard services and soft services, including maintenance, cleaning, housekeeping, hospitality, and external-area services. Demonstrated experience in project budgeting, contract management, SLA performance, workforce planning, and client management. Professional certification in project management or facilities management is preferred. Experience in project estimation and proposal preparation is preferred.

<h3 >About AECOM</h3> <p >AECOM is a trusted global infrastructure consulting firm committed to delivering a better world. The company's work supports communities by improving commutes, ensuring access to power and clean water, and transforming urban landscapes. With a global team of over 50,000 professionals, AECOM partners with clients to address complex challenges and build lasting legacies for future generations. The firm is experiencing significant demand for its services due to accelerating infrastructure investment worldwide.</p> <h3 >The Role: Senior Cost Engineer</h3> <p >AECOM is seeking a <strong >Senior Cost Engineer</strong> to join its team in Makkah, Saudi Arabia. This full-time position focuses on managing and controlling project costs for design and construction projects within urban infrastructure and facilities development. The Senior Cost Engineer will be responsible for developing comprehensive cost estimates, providing strategic financial guidance, and leveraging commercial management expertise to support successful project delivery.</p> <h3 >Key Responsibilities</h3> <ul > <li >Develop detailed cost estimates and budgets for design and construction projects using industry-standard practices, calculation methodologies, and cost management software.</li> <li >Apply comprehensive knowledge of cost estimating standards, procedures, and specifications relevant to urban infrastructure and facilities projects.</li> <li >Analyze project costs, identify variances, and implement corrective actions to maintain budget compliance and financial performance.</li> <li >Conduct cost-benefit analyses and feasibility studies to support project decision-making and strategic planning for infrastructure and facilities development.</li> <li >Monitor and track project expenditures across design and construction phases, prepare detailed cost reports, and communicate financial performance to stakeholders.</li> <li >Collaborate with project managers, engineers, and procurement teams to forecast costs, manage financial resources effectively, and support commercial management objectives.</li> <li >Review and validate vendor quotes, contracts, and invoices to ensure accuracy, cost optimization, and compliance with project specifications.</li> <li >Develop and maintain cost models, databases, and historical cost information for urban infrastructure and facilities projects to support future estimating and planning.</li> <li >Provide cost engineering expertise and recommendations to senior management on project profitability, financial risk mitigation, and commercial viability.</li> <li >Mentor junior cost engineers and support the development of cost management processes, best practices, and calculation methodologies.</li> <li >Ensure compliance with organizational policies, industry standards, regional regulations, and cost estimating procedures in all cost management activities.</li> </ul> <h3 >Required Expertise</h3> <p >Candidates for this role should possess strong analytical expertise and technical knowledge to optimize resource allocation, identify cost-saving opportunities, and ensure projects remain within budget parameters while maintaining quality standards. A comprehensive understanding of cost estimating standards, procedures, and specifications relevant to urban infrastructure and facilities projects is essential.</p> <h3 >Work Environment and Recruitment Process</h3> <p >This is a full-time position based in Makkah, Saudi Arabia. AECOM is committed to maintaining a secure and trustworthy recruitment process. As a condition of employment, all newly hired employees are required to attend an in-person Day 1 onboarding at an AECOM office location.</p> <h3 >Join AECOM</h3> <p >Become part of a global team of professionals delivering projects that create a positive and tangible impact around the world. AECOM invites individuals to contribute their expertise to building legacies for future generations.</p>

About UMQ Design UMQ Design is a leading design and build company specializing in delivering high-quality interior fit-out and construction solutions across Saudi Arabia. We are committed to excellence in project execution, ensuring every project is delivered with the highest standards of quality, safety, and craftsmanship. About the Role UMQ Design is seeking an experienced Architectural Site Supervisor to join our Execution Department. The successful candidate will be responsible for supervising architectural and fit-out works on-site, ensuring that all activities are executed in accordance with approved drawings, project specifications, quality standards, and project schedules. The ideal candidate will have strong knowledge of interior fit-out and finishing works, excellent site coordination skills, and the ability to lead site teams while maintaining quality, safety, and timely project delivery. Key Responsibilities Supervise daily architectural and interior fit-out works on-site. Ensure all work is executed in accordance with approved shop drawings, specifications, and project requirements. Coordinate daily site activities with Project Engineers, Site Engineers, subcontractors, and other disciplines. Monitor the quality of architectural finishes, including gypsum works, ceilings, partitions, flooring, wall finishes, joinery, painting, and decorative elements. Inspect completed work and ensure compliance with quality standards before client or consultant inspections. Monitor manpower productivity and ensure work progresses according to the approved schedule. Coordinate material deliveries and verify that materials comply with approved submittals. Identify site issues and coordinate with the engineering team to resolve technical challenges. Ensure compliance with Health, Safety & Environment (HSE) requirements and company policies. Attend site inspections and support snagging, testing, and final project handover. Prepare daily progress updates and report site activities to the Project Engineer or Project Manager. Maintain proper housekeeping and ensure a safe and organized work environment. Qualifications Diploma or Bachelor's Degree in Architecture, Architectural Engineering, Civil Engineering, or a related field.2–4 years of experience in architectural site supervision, interior fit-out, or finishing projects. Experience supervising architectural finishing works on commercial, hospitality, office, or retail projects. Ability to read and interpret architectural drawings, shop drawings, and material specifications. Good knowledge of construction methods, finishing materials, and fit-out execution. Familiarity with quality control procedures and site safety requirements. Strong communication, coordination, and leadership skills. Ability to work in a fast-paced project environment and manage multiple site activities. Proficiency in Microsoft Office. Experience with Auto CAD is an advantage. Preferred Experience Interior Fit-Out Projects Commercial Buildings Corporate Offices Hospitality Projects Retail Projects Design & Build Contractors Employment Details Department: Execution Employment Type: Full-Time / Project-Based Location: Al Khobar, Saudi Arabia**If you are passionate about delivering high-quality architectural finishes and enjoy working in a dynamic site environment, we encourage you to join UMQ Design and contribute to the successful delivery of our projects.

<div dir="rtl"><h3 >نظرة عامة على الوظيفة</h3> <p >يبحث مكتب المنظور الشامل للاستشارات الهندسية عن <strong >مهندس معماري</strong> للانضمام إلى فريقه المتخصص. يهدف هذا الدور إلى تعزيز قدرات المكتب في تصميم وتطوير المشاريع المعمارية المتنوعة. يتطلب الدور خبرة عملية قوية تتراوح بين 5 إلى 10 سنوات في مجال الهندسة المعمارية، وسيكون العمل بدوام كامل ضمن بيئة مهنية ديناميكية، مع التركيز على مشاريع المكتب في مدينة الرياض.</p> <h3 >الموقع الجغرافي للعمل</h3> <p >يقع المقر الرئيسي لمكتب المنظور الشامل للاستشارات الهندسية في مدينة الخرج، حيث يتم تنسيق العمليات الإدارية والتشغيلية. ومع ذلك، فإن المهندس المعماري المطلوب لهذا الدور سيتمركز عمله بشكل أساسي في مدينة الرياض، حيث تتركز غالبية المشاريع الحالية والمستقبلية التي يتولى المكتب تنفيذها. هذا يتطلب القدرة على العمل بفاعلية في بيئة مدينة الرياض.</p> <h3 >المؤهلات والمتطلبات الأساسية</h3> <p >للنظر في هذا الدور، يجب أن يستوفي المتقدم المتطلبات الأساسية التالية لضمان التوافق مع طبيعة العمل ومتطلبات السوق المحلي:</p> <ul > <li >أن يكون المتقدم <strong >سعودي الجنسية</strong>، وذلك تماشياً مع اللوائح المحلية ومتطلبات التوظيف.</li> <li >امتلاك خبرة عملية مثبتة تتراوح بين <strong >5 إلى 10 سنوات</strong> في مجال الهندسة المعمارية، مما يعكس القدرة على التعامل مع تحديات المشاريع المختلفة وتقديم حلول تصميمية مبتكرة.</li> </ul> <h3 >طبيعة العمل والخبرة المطلوبة</h3> <p >تعتبر هذه الوظيفة بدوام كامل، مما يستلزم التفرغ التام والالتزام بتقديم أفضل مستويات الأداء. يتوقع من المهندس المعماري أن يمتلك فهماً عميقاً للمبادئ المعمارية، وأن يكون قادراً على تطبيق خبرته الواسعة في تصميم المشاريع والإشراف عليها. الخبرة المطلوبة بين 5 و10 سنوات تؤكد الحاجة إلى مرشح يتمتع بالاستقلالية والقدرة على اتخاذ القرارات المهنية والمساهمة الفعالة في نجاح المشاريع.</p> <h3 >عن مكتب المنظور الشامل للاستشارات الهندسية</h3> <p >مكتب المنظور الشامل للاستشارات الهندسية هو مؤسسة متخصصة في تقديم مجموعة واسعة من الخدمات الاستشارية الهندسية. يلتزم المكتب بتقديم حلول تصميمية وهندسية متكاملة وعالية الجودة لعملائه في مختلف القطاعات، مع التركيز على الابتكار والتميز في كل مشروع يتم تنفيذه.</p> <h3 >عملية التقديم</h3> <p >ندعو المهندسين المعماريين المؤهلين والمهتمين بهذا الدور إلى تقديم طلباتهم للانضمام إلى فريق عملنا. سيتم مراجعة جميع الطلبات بعناية، وسيتم التواصل مع المرشحين الذين يستوفون المتطلبات المذكورة لمناقشة الخطوات التالية في عملية التوظيف.</p></div>

<p>Independently develop and supervises the creation of engineering products that meet customer quality requirements. This includes defining the problem, establishing the work scope, preparing the budget and schedule, planning the work, providing technical direction, and reporting the work status. Typical products may include detailed calculations, drawings, procurement documents, design and installation packages, proposal evaluations, technical reports, and detailed analyses.</p><p>Provides support for other engineering activities as required.</p><p>Provides input and technical guidance to CAD Designer/Drafters, Designers, and lower-level Engineers working on the same project.</p><p>Performs other responsibilities associated with this position as may be appropriate.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelors in Mechanical Engineering (or similar) with minimum 10 years' experience and at least 4 years of Public Realm experience</p>

Overview<br><br>We are looking for a Senior UI/UX Designer to become the design function for our Generative AI team. We build AI products for web and mobile, and we build them quickly, with AI assistance in the loop. Today the engineers writing the code are also making the design decisions. That keeps us moving, and it shows: every project reinvents the same screen, and nothing looks like it came from the same company.<br><br>This role has two halves.<br><br>The first is the design work itself: the flows, the screens, the states, and the visual and interaction decisions across products that are shipping now. The second is the part most design roles stop short of, and it is why this role exists. You will turn your own design work into a design system, tokens, components, and patterns, and hand it to engineering in a form they build from directly.<br><br>A folder of mockups does not scale to several products and a team that ships daily with AI assistance. A system does. You will not be asked to be a front-end engineer, but you are expected to take your design all the way to the artifacts engineering builds from, and to use AI tooling to help you get there. The measure of success is how much good design work happens without you in the room, not how much passes through you.<br><br>Requirements<br><br>Key Responsibilities<br><br>The role spans four areas, and you will move between them continuously:2. Design System and Handoff to Engineering3. Designing for Generative AI Products4. Enablement and Adoption<br><br> Product Design Across Web and Mobile Design user flows, screens, states, and interactions for Generative AI products that are actively shipping to internal and external users Design the whole experience rather than the happy path: empty, loading, error, and edge cases, first run and hundredth Establish the visual language for the team's products and hold the line on it: typography, color, spacing, layout, iconography, and motion Prototype where it helps a decision get made faster than a discussion would Find the patterns across the screens you have designed, and decide what earns its place as a token, a component, or a documented pattern, and what stays a deliberate one-off Build and maintain the system in Figma to a standard other people can build from: variables, component properties, auto layout, and libraries Hand the system to engineering in a form they use directly: exported design tokens, the CSS or theme configuration generated from them, and written usage rules with examples Keep the system current as the products change. Version it, say what changed, and retire what nobody uses Design the patterns AI products need and most design systems do not cover: chat and conversational surfaces, streaming output, visible agent steps and tool calls, citations and sources, and human review and approval Design for uncertainty: latency, partial answers, model error, and the affordances that let someone correct or stop an agent Use AI tooling throughout your own work, in Figma, in Claude Design, and in the handoff layer, to get from a design decision to a usable artifact quickly Package the system so AI-assisted work follows it by default, as repository-level rules and skills that coding agents load, so a generated screen starts inside the system rather than beside it Work alongside the engineers as the system is adopted. Review what shipped against what was designed, and fix the system where the system was at fault Keep the whole thing non-blocking. Nobody should wait on you to build a screen<br><br>Requirements<br><br>We care more about how you think and what you have built than about a checklist.<br><br>Experience: Eight or more years in UI/UX or product design, with real ownership of the design decisions rather than execution against someone else's direction Craft and Judgment: Strong visual and interaction design. Your work holds up when someone looks closely, and you can explain a decision in terms of what it does for the person using the product rather than in terms of taste Systems Thinking: Experience turning design work into something reusable: tokens, components, patterns, or a documented library that other people built from Web and Mobile: Comfortable designing for both, and clear about where a shared system stops and platform convention takes over Figma: Strong Figma skills, including variables, component properties, auto layout, and libraries Handoff: Comfortable producing what engineering builds from, and willing to work into the token and CSS layer. You do not need to be a front-end engineer, and AI tooling can help you close the gap Working with AI: You use AI tools deliberately in your own work and can say where they helped and where you overrode them. This is how the team builds, so it matters Portfolio: Work you can walk us through and talk about. Confidential or unlaunched work is completely fine, and a walkthrough works as well as a link<br><br>Strong Assets<br><br>None of these are required, and their absence will not count against a strong candidate:<br><br>Experience designing for AI or agentic products Familiarity with design token pipelines such as Style Dictionary or the W3C design tokens format Front-end ability beyond the token layer, for example building components yourself Accessibility practice: keyboard and focus behavior, and screen reader semantics built into components Right-to-left and bilingual interfaces, particularly Arabic and English Motion and interaction design, dense or data-heavy interfaces, or data visualization Usability testing or research to validate design decisions<br><br>Why This Role?<br><br>Own the Design Function: You are not one designer among many. You set the visual and experience direction for the team's products, and you decide what the system is Unusual Leverage: Your design decisions do not stop at one screen. Once they become tokens and components, they shape every product the team ships, including the work generated with AI assistance Work at the Front of AI Product Design: You will design interaction patterns for agentic products that most design systems have no answer for yet, and work with AI tooling as a daily part of the craft rather than an experiment Close to the Build: You will sit with the engineers building your designs, see what shipped, and change the system when the system was wrong

<p>Join BEC Arabia as a QA/QC - MEP Team Leader in Khobar and play a pivotal role in ensuring the highest quality standards for our cutting-edge construction and infrastructure projects. Lead a dynamic team, collaborate on iconic mega-projects, and contribute to the success of Saudi Vision 2030 initiatives.</p> Job Description About the Role <p>BEC Arabia is seeking a highly skilled <strong>QA/QC - MEP Team Leader</strong> to join our team in Khobar. This role is critical in ensuring the quality and compliance of Mechanical, Electrical, and Plumbing (MEP) systems across our diverse portfolio of projects, which include commercial buildings, residential mega-projects, industrial facilities, and government infrastructure. As a QA/QC - MEP Team Leader, you will oversee a team of quality professionals, ensuring that all MEP installations meet the highest standards of safety, functionality, and regulatory compliance.</p> <p>You will work closely with project managers, site engineers, and subcontractors to implement and monitor quality assurance and quality control processes. Your expertise will directly contribute to maintaining BEC Arabia s reputation for delivering world-class construction projects that align with the ambitious goals of <strong>Saudi Vision 2030</strong>. This role offers a unique opportunity to lead quality initiatives on some of the most iconic and transformative projects in the Kingdom of Saudi Arabia.</p> <p>This position is ideal for a seasoned QA/QC professional with a strong background in MEP systems, a passion for excellence, and a commitment to fostering a culture of quality and safety. If you are ready to take your career to the next level with a company that values innovation, integrity, and professional growth, we encourage you to apply.</p> Key Responsibilities <ul> <li> <strong>Lead</strong> the QA/QC team for MEP works, ensuring compliance with project specifications, industry standards, and regulatory requirements.</li> <li> <strong>Develop</strong> and implement quality assurance plans, inspection test plans (ITPs), and checklists for MEP systems.</li> <li> <strong>Monitor</strong> and evaluate MEP installation activities on-site to ensure adherence to approved drawings, specifications, and quality standards.</li> <li> <strong>Coordinate</strong> with project managers, site engineers, and subcontractors to address quality issues and implement corrective actions.</li> <li> <strong>Conduct</strong> regular site inspections and audits to identify potential quality risks and recommend preventive measures.</li> <li> <strong>Ensure</strong> all MEP materials and equipment meet project requirements and are approved by relevant stakeholders.</li> <li> <strong>Prepare</strong> and maintain detailed QA/QC documentation, including inspection reports, non-conformance reports (NCRs), and quality records.</li> <li> <strong>Collaborate</strong> with the safety team to ensure MEP works comply with health, safety, and environmental standards.</li> <li> <strong>Train</strong> and mentor junior QA/QC staff to build a high-performing quality team.</li> <li> <strong>Liaise</strong> with clients, consultants, and third-party inspectors to resolve quality-related issues and ensure client satisfaction.</li> <li> <strong>Stay updated</strong> on the latest industry standards, technologies, and best practices in MEP quality management.</li> </ul> Working Conditions <ul> <li>Based in <strong>Khobar</strong>, with frequent visits to construction sites.</li> <li>Combination of office and site-based work environments.</li> <li>Exposure to outdoor conditions, including high temperatures typical of the region.</li> <li>Personal Protective Equipment (PPE) required when on-site.</li> <li>Standard working hours with occasional extended hours to meet project deadlines.</li> <li>Regional travel may be required to support projects across the Kingdom.</li> </ul> What We Offer <ul> <li>Competitive salary and comprehensive benefits package.</li> <li>Opportunities for professional growth and career advancement.</li> <li>Access to training programs and certifications to enhance your skills.</li> <li>A safety-first culture with a strong commitment to employee well-being.</li> <li>Exposure to iconic mega-projects that shape the future of Saudi Arabia.</li> <li>A diverse, inclusive, and collaborative work environment.</li> <li>Support for Saudi Vision 2030 initiatives and sustainable construction practices.</li> </ul> Skills <ul> <li> <strong>MEP systems quality assurance</strong> </li> <li> <strong>Inspection test plans (ITPs)</strong> </li> <li> <strong>AutoCAD</strong> </li> <li> <strong>Primavera P6</strong> </li> <li> <strong>ISO 9001</strong> </li> <li> <strong>Saudi Building Code (SBC)</strong> </li> </ul> Suggested Required Skills <ul> <li>MEP systems quality assurance</li> <li>Inspection test plans (ITPs)</li> <li>AutoCAD</li> <li>Primavera P6</li> <li>ISO 9001</li> <li>Saudi Building Code (SBC)</li> </ul> Suggested Preferred Skills <ul> <li>Certified Quality Engineer (CQE)</li> <li>LEED or Mostadam expertise</li> <li>BIM for MEP systems</li> <li>Experience on Saudi Vision 2030 projects</li> <li>Bilingual proficiency (English and Arabic)</li> </ul> Suggested Education <ul> <li>Bachelor of Science in Mechanical Engineering, Electrical Engineering, or a related field</li> </ul> Suggested Min Years Experience <p>8</p><p><strong>Desired Candidate Profile</strong></p><ul><li> <strong>Bachelor of Science in Mechanical Engineering, Electrical Engineering, or a related field</strong>.</li><li>Minimum <strong>8 years of experience</strong> in QA/QC roles within the construction industry, with at least <strong>3 years in a leadership capacity</strong>.</li><li>Proven expertise in <strong>MEP systems</strong> quality assurance and control.</li><li>Familiarity with <strong>Saudi Building Code (SBC)</strong> and other relevant standards.</li><li> <strong>Saudi Council of Engineers (SCE)</strong> registration (mandatory for KSA-based roles).</li><li>Proficiency in quality management tools and software, such as <strong>AutoCAD</strong>, <strong>Primavera P6</strong>, and <strong>MS Office</strong>.</li><li>Strong knowledge of <strong>ISO 9001</strong> quality management systems.</li><li>Excellent communication and leadership skills.</li></ul>

At Jacobs, we're challenging today to reinvent tomorrow by solving the world's most critical problems for thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery and cutting-edge manufacturing, turning abstract ideas into realities that transform the world for good.<br><br>Your impact<br><br>At Jacobs, we push the limits of what is possible to make the world smarter and more connected. We are seeking a Senior MEP Engineer to join our team at NEOM and provide technical leadership for the completion, commissioning, and handover of a major water infrastructure project.<br><br><strong>About The Opportunity<br><br></strong>Lead the Mechanical, Electrical and Plumbing (MEP) completion activities for a major water project entering its close-out phase. Working closely with project teams, contractors, consultants, and client stakeholders, you will ensure MEP systems are successfully installed, tested, commissioned, documented, and handed over in accordance with project requirements. This role will focus on construction completion, punch list closure, defect resolution, operational readiness, and handover activities to support the successful delivery and close out of the project.<br><br>Key Responsibilities<br><br><ul><li> Lead MEP completion and close-out activities across water infrastructure assets and facilities.</li><li> Monitor contractor progress against completion schedules and handover milestones.</li><li> Coordinate the resolution of technical issues, defects, NCRs, RFIs, and punch list items.</li><li> Oversee testing, commissioning, system integration, and performance verification activities.</li><li> Review commissioning documentation, test records, completion dossiers, and turnover packages.</li><li> Ensure all MEP installations comply with approved specifications, project requirements, and applicable industry standards.</li><li> Coordinate handover activities, including as-built documentation, asset registers, O&amp;M manuals, training records, and warranty documentation.</li><li> Act as the primary technical interface between contractors, consultants, operations teams, and client representatives during project close out.</li><li> Support quality inspections, operational readiness reviews, and final acceptance processes.</li><li> Promote safety, technical excellence, and compliance with project procedures, regulatory requirements, and HSE standards.<br><br><br></li></ul>Here's what you'll need<br><br><ul><li> Experience Minimum 10 years of experience in MEP Engineering on major infrastructure, utilities, water, wastewater, industrial, or construction projects.</li><li> Technical Strong knowledge of mechanical, electrical, plumbing, utility, pumping, water treatment, power distribution, HVAC, fire protection, testing &amp; commissioning, and handover processes.</li><li> Digital Experience with Autodesk Construction Cloud, AutoCAD, BIM platforms, document management systems, and digital project delivery environments.</li><li> Project &amp; Commercial Contractor management, project delivery, change management, risk management, commissioning coordination, and project close-out activities.</li><li> Behavioral Leadership, stakeholder management, communication, problem solving, decision making, collaboration, and mentoring mindset.</li><li> Education Bachelor's Degree in Mechanical Engineering, Electrical Engineering, Building Services Engineering, or a related discipline.<br><br><br></li></ul>Jacobs. A world where you can. From our inclusive employee networks to our positive mental health champions, we're committed to driving a culture of caring where you can be you. Joining Jacobs not only connects you locally but globally, and together, our diverse perspectives and unique backgrounds power our collective strength.<br><br>With safety and flexibility always top of mind, we've gone beyond traditional ways of working so you have the support, means and space to maximize your potential. You'll uncover flexible working arrangements, benefits, and opportunities to do good too, from participating in our global giving and volunteering program, to exploring new and inventive ways to help our clients make the world a better place.<br><br>Start your Jacobs career with a company that inspires and empowers you to deliver your best work so you can evolve, grow and succeed today and into tomorrow.<br><br>From our inclusive employee networks to our positive mental health champions – we’re committed to driving a culture of caring where you can be you. Joining Jacobs not only connects you locally but globally - and together, our diverse perspectives and unique backgrounds power our collective strength. We collaborate and share! By supporting one another, we all succeed.<br><br>With safety and flexibility always top of mind, we’ve gone beyond traditional ways of working so you have the support, means and space to maximize your potential. You’ll uncover flexible working arrangements, benefits and opportunities to do good too – from participating in our global giving and volunteering program, to exploring new and inventive ways to help our clients make the world a better place.<br><br>No matter what drives you, you’ll discover how you can cultivate, nurture and achieve your goals – all at a single global company.<br><br>Onsite employees are expected to attend a Jacobs Workplace on a full-time basis, as required by the nature of their role.<br><br>Your application experience is important to us, and we’re keen to adapt to make every interaction even better. If you require further support or reasonable adjustments with regards to the recruitment process (for example, you require the application form in a different format), please contact the team via Careers Support.

<div dir="rtl"><h3 >نبذة عن الوظيفة</h3> <p >تعلن شركة واحة الروز للمقاولات شركة شخصواحد عن توفر وظيفة <strong >مهندس معماري</strong> بدوام كامل في مدينة الرياض. يركز هذا الدور على تصميم المباني الجديدة، بالإضافة إلى تطوير الملحقات والتعديلات على الهياكل القائمة. كما يشمل تقديم المشورة المتخصصة في ترميم الممتلكات القديمة والمحافظة عليها، والمساهمة في اختيار المواقع والإشراف على مراحل أعمال الإنشاءات. هذه الفرصة مناسبة للمرشحين ذوي الخبرة من 0 إلى 1 سنة.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >تصميم المباني الجديدة أو الملحقات أو التعديلات على المباني القائمة.</li> <li >تقديم المشورة بشأن ترميم الممتلكات القديمة والمحافظة عليها.</li> <li >المساعدة في اختيار الموقع ومباشرة أعمال الإنشاءات.</li> <li >وضع التصاميم لمشاريع الإنشاءات وإدارة فريق التصميم في اختيار المواد وتطوير المواصفات.</li> <li >إعداد نماذج بالحجم الوهمي والرسومات والنماذج الرقمية.</li> <li >المساعدة في اختيار المقاولين واختيار المواد.</li> <li >تقديم الدعم لمشروعات الإنشاء، ومباشرة تنفيذ التصميم من قِبل المقاول.</li> <li >إعداد الوثائق والتقارير المتخصصة بالأعمال والمشروعات الهندسية ونسب تقدمها وعرضها وتوضيحها وحفظها في قاعدة البيانات الخاصة بها وفقاً للسياسات والإجراءات المعتمدة.</li> </ul> <h3 >المؤهلات والخبرات المطلوبة</h3> <p >يتطلب هذا الدور خبرة عملية تتراوح بين <strong >0 إلى 1 سنة</strong> في مجال الهندسة المعمارية أو مجال ذي صلة.</p> <h3 >بيئة العمل</h3> <p >تتوفر هذه الوظيفة بدوام كامل في مدينة <strong >الرياض</strong>، المملكة العربية السعودية.</p> <h3 >عن الشركة</h3> <p >شركة واحة الروز للمقاولات شركة شخصواحد هي كيان متخصص في قطاع المقاولات والإنشاءات، ملتزم بتقديم حلول معمارية وهندسية متكاملة. تسعى الشركة إلى المساهمة في تطوير المشاريع الإنشائية في المملكة العربية السعودية.</p> <h3 >تقديم الطلبات</h3> <p >ندعو المهندسين المعماريين الطموحين الذين يستوفون المتطلبات المذكورة أعلاه إلى تقديم طلباتهم لهذه الفرصة في الرياض.</p></div>

<p>Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International s founders established a simple yet powerful formula: Approach each client engagement as a partnership , create an environment that attracts the most talented professionals and allows them to flourish, and regulate growth to maintain excellence in our service standards.</p><p>Role Overview We are seeking a detail-oriented and technically capable Commissioning Coordinator to support commissioning activities for major mission-critical and data center projects in KSA. The role will support the Commissioning Manager in coordinating commissioning readiness, tracking L1 L5 commissioning activities , maintaining commissioning documentation, monitoring open issues and corrective actions, and coordinating contractors, consultants, vendors, and project stakeholders through testing, turnover, and handover. The ideal candidate will have practical knowledge of mission-critical MEP systems, commissioning processes, testing documentation, and project handover, with strong organizational, coordination, and reporting skills.</p><p>Responsibilities</p><ul><li>Support the implementation and maintenance of the Project Commissioning Management Plan .</li><li>Coordinate commissioning activities across contractors, consultants, vendors, and project stakeholders.</li><li>Maintain and update commissioning schedules, trackers, dashboards, and progress reports.</li><li>Track commissioning readiness against project milestones and stage-gate requirements.</li><li>Support coordination of L1 L5 commissioning activities , Functional Performance Testing, and Integrated Systems Testing.</li><li>Coordinate test schedules, witnessing requirements, vendor attendance, and required project resources.</li><li>Maintain commissioning test scripts, procedures, method statements, inspection records, and supporting documentation.</li><li>Track commissioning submissions, approvals, comments, and outstanding documentation.</li><li>Monitor commissioning issues, punch items, deficiencies, and corrective actions through closure.</li><li>Support readiness assessments by ensuring required documentation, systems, personnel, and prerequisites are available.</li><li>Coordinate with contractors and vendors to resolve outstanding commissioning actions and documentation gaps.</li><li>Assist in maintaining commissioning issue logs, action registers, and risk trackers.</li><li>Verify that commissioning test records, certificates, reports, and turnover packages are properly compiled and submitted.</li><li>Coordinate system turnover and handover documentation with construction, commissioning, document control, and operations teams.</li><li>Support preparation of commissioning progress reports, dashboards, meeting minutes, and management updates.</li><li>Organize commissioning meetings and follow up on assigned actions and deadlines.</li><li>Escalate significant commissioning delays, constraints, risks, and readiness gaps to the Commissioning Manager.</li><li>Support final project acceptance and operational readiness activities.</li><li>Maintain accurate records within electronic commissioning management and document control systems.</li></ul><p>Qualifications</p><p>Required Qualifications</p><ul><li>Bachelor s degree in Mechanical Engineering, Electrical Engineering, Electromechanical Engineering , or a related engineering discipline.</li><li>Relevant experience supporting commissioning activities on construction, mission-critical, industrial, or data center projects.</li><li>Good understanding of mechanical, electrical, controls, and mission-critical MEP systems.</li><li>Familiarity with commissioning planning, testing, documentation, and handover processes.</li><li>Understanding of L1 L5 commissioning processes .</li><li>Exposure to Functional Performance Testing and Integrated Systems Testing.</li><li>Experience maintaining commissioning trackers, issue logs, action registers, and testing documentation.</li><li>Good understanding of turnover documentation, test records, certificates, and handover packages.</li><li>Strong coordination and organizational skills.</li><li>Ability to follow multiple commissioning activities and priorities simultaneously.</li><li>Strong attention to detail and documentation accuracy.</li><li>Good written and verbal communication skills.</li><li>Ability to coordinate effectively with contractors, consultants, vendors, engineers, and project management teams.</li></ul><p>Preferred Qualifications</p><ul><li>Previous experience on data center or mission-critical projects .</li><li>Exposure to hyperscale data center commissioning environments.</li><li>Familiarity with ASHRAE commissioning guidelines .</li><li>Familiarity with CSA, BSRIA, or other recognized commissioning standards and frameworks.</li><li>Commissioning-related certification such as CxA, ACG, BCxP , or equivalent is advantageous.</li><li>Experience using electronic commissioning management systems.</li><li>Experience with electronic document control and turnover platforms.</li><li>Experience coordinating multi-disciplinary MEP commissioning activities.</li><li>Previous experience working within a PMC, consultant, or client-side project management environment is advantageous.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in Mechanical Engineering, Electrical Engineering, Electromechanical Engineering , or a related engineering discipline.</li><li>Relevant experience supporting commissioning activities on construction, mission-critical, industrial, or data center projects.</li><li>Good understanding of mechanical, electrical, controls, and mission-critical MEP systems.</li><li>Familiarity with commissioning planning, testing, documentation, and handover processes.</li><li>Understanding of L1 L5 commissioning processes .</li><li>Exposure to Functional Performance Testing and Integrated Systems Testing.</li><li>Experience maintaining commissioning trackers, issue logs, action registers, and testing documentation.</li><li>Good understanding of turnover documentation, test records, certificates, and handover packages.</li><li>Strong coordination and organizational skills.</li><li>Ability to follow multiple commissioning activities and priorities simultaneously.</li><li>Strong attention to detail and documentation accuracy.</li><li>Good written and verbal communication skills.</li><li>Ability to coordinate effectively with contractors, consultants, vendors, engineers, and project management teams.</li><li>Previous experience on data center or mission-critical projects .</li><li>Exposure to hyperscale data center commissioning environments.</li><li>Familiarity with ASHRAE commissioning guidelines .</li><li>Familiarity with CSA, BSRIA, or other recognized commissioning standards and frameworks.</li><li>Commissioning-related certification such as CxA, ACG, BCxP , or equivalent is advantageous.</li><li>Experience using electronic commissioning management systems.</li><li>Experience with electronic document control and turnover platforms.</li><li>Experience coordinating multi-disciplinary MEP commissioning activities.</li><li>Previous experience working within a PMC, consultant, or client-side project management environment is advantageous.</li></ul>

<h3>About Parsons</h3><p>Parsons is seeking an <strong>Associate Electrical Engineer (Saudi National)</strong> to join its team in Al Khobar, Eastern Province. This full-time position is part of the Tamkeen Program, designed for recent graduates looking to begin their careers in engineering.</p><h3>Role Overview</h3><p>The Associate Electrical Engineer will perform various engineering and design assignments, applying fundamental principles and theories learned in a Bachelor's degree program. This role offers an opportunity to gain practical experience within a professional engineering environment.</p><h3>Key Responsibilities</h3><ul><li>Perform various engineering and design assignments requiring the application of basic principles and fundamental theories.</li><li>Prepare or assist in preparing fundamental engineering computations, material quantity takeoffs, estimates, surveys, and designs.</li><li>Assist in the preparation of detailed requisitions for material purchase, services, and subcontracts.</li><li>Under the guidance of a senior engineer, assist in reviewing supplier drawing submittals and technical bid analyses.</li><li>Assist in the preparation and issuance of specifications, data sheets, and other construction documents.</li><li>Perform other responsibilities associated with this position as appropriate.</li></ul><h3>Qualifications and Experience</h3><ul><li>0-1 years of experience in a relevant field.</li><li>Bachelor's degree in Electrical Engineering or a related engineering discipline.</li></ul><h3>Required Skills</h3><ul><li>Excellent communication and interpersonal skills.</li><li>Highly motivated and ambitious.</li></ul><h3>Work Environment</h3><p>This is a full-time position based in Al Khobar, offering a structured environment for professional growth within Parsons.</p>

<p>Identify and attend to minor mechanical, hydraulic, pneumatic, and electrical issues in plant equipment and machinery. Perform first-level troubleshooting for breakdowns to minimize downtime. Coordinate with maintenance and OEM service teams for major repairs. Ensure daily, weekly, and preventive maintenance activities are carried out as per schedule. Maintain records of breakdowns, repairs, and corrective actions. Supervise operators, technicians, helpers, and contract workers. Allocate duties and shifts based on production requirements. Ensure operators are trained and competent to handle assigned equipment. Enforce discipline, attendance, and work efficiency on site. Conduct toolbox talks and safety briefings for plant and machinery operations. Identify unsafe acts and conditions and take corrective actions. Ensure compliance with statutory, environmental, and company safety standards.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Principal Engineer, Solutions Architecture</strong></p><br><p>When our customers seek trusted IT consulting expertise, where else would they turn but to the company driving human progress through technology? Our Solutions Architecture team within Professional Services stands at the forefront of solution customization, complex integration, and end-to-end delivery across targeted industry segments. Through deep consultation, rigorous analysis, and hands-on engineering, we architect and deliver new IT systems—or transform existing ones—to support our customers' strategic, operational, and financial goals.</p><br><p><strong>What&nbsp;you’ll&nbsp;achieve:</strong></p><br><p>As a Principal Engineer, you will lead high-impact initiatives centered on Dell storage solutions—including Dell PowerScale and ObjectScale, owning end-to-end architectures and complex integration strategies across enterprise and AI-driven environments. You will prototype solutions, validate design patterns, drive ecosystem integrations and data management tools, and ensure non-functional requirements—performance, scalability, resilience, and security—are met at scale.</p><br><p>Join us to do the best work of your career and make a profound social impact as a<strong> Principal Engineer </strong>on our <strong>Solutions Architecture </strong>team.</p><br><br><b>Who We Are</b><p>We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.</p><br><p>Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.<br> Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. <b>Read the full Equal Employment Opportunity Policy</b>.</p><br><p>Visit our <b><i>Culture Code</i></b>&nbsp;page to learn more about how we work and lead.</p><br><br>Responsibilities:<br><p><strong>You will:</strong></p><br><ul><li><strong>Architect &amp; Design:</strong> Create architectural designs and implementation plans for Dell PowerScale and ObjectScale deployments, emphasizing AI and data-intensive workloads.</li><li><strong>Drive Migrations &amp; Integrations: </strong>Lead data migrations using native Dell and third-party tooling. Integrate Dell storage with analytics, AI, and cloud-native platforms.</li><li><strong>Install, Customize &amp; Integrate: </strong>Oversee installation, customization, and integration of PowerScale and ObjectScale across diverse customer environments.</li><li><strong>Validate &amp; Benchmark: </strong>Conduct design reviews, PoCs, and performance benchmarking to validate PowerScale and ObjectScale architectures against customer requirements.</li><li><strong>Standardize &amp; Mentor: </strong>Document reusable design standards and reference architectures for block, file, and object storage. Mentor engineers in advanced design and delivery excellence.</li></ul><br>Qualifications:<br><p><strong>Take the first step towards your dream career</strong></p><br><p>Every Dell Technologies team member brings something unique to the table.&nbsp;Here’s&nbsp;what we are looking for with this role:</p><br><p><strong>Essential Requirements</strong></p><br><ul><li>8+ years of progressive experience in enterprise storage architecture, design, and delivery.</li><li>Proven track record in the delivery of complex storage design architectures, large-scale integrations, and data migrations across heterogeneous environments.</li><li>Hands-on experience designing and implementing Dell storage solutions in AI/ML, analytics, and high-performance computing projects.</li><li>Automation-first mindset with practical experience applying automation across build, test, and deploy pipelines to accelerate delivery and ensure repeatability.<br>&nbsp;</li></ul><p><strong>Desirable Requirements</strong></p><br><ul><li>Bachelor's degree in Computer Science, Information Technology, Engineering, or a related field.</li><li>Dell Technologies Proven Professional certification in Storage Design and Implementation (e.g., PowerScale, ObjectScale, and related tracks).</li></ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<ul><li><p>Develop and maintain detailed 3D BIM models for electrical systems</p></li><li><p>Prepare electrical layouts, shop drawings, installation drawings, sections, details, and coordinated drawings based on approved designs.</p></li><li><p>Interpret electrical design drawings, specifications, schematics, and project requirements.</p></li><li><p>Coordinate electrical models with architectural, structural, mechanical, plumbing, and other MEP services.</p></li><li><p>Identify and resolve clashes using BIM coordination/clash detection software such as Navisworks.</p></li><li><p>Incorporate design changes, RFIs, site requirements, and approved technical revisions into BIM models.</p></li><li><p>Prepare coordinated shop drawings and construction drawings for site execution.</p></li><li><p>Ensure models and drawings comply with project BIM standards, LOD requirements, and company procedures.</p></li><li><p>Assist BIM Engineers/Coordinators in preparing coordination models and resolving technical issues.</p></li><li><p>Extract quantities, schedules, and relevant information from BIM models when required.</p></li><li><p>Maintain proper model version control and follow project document management procedures.</p></li><li><p>Coordinate with site engineers and construction teams to ensure the BIM model reflects actual installation requirements.</p></li><li><p>Participate in BIM coordination meetings and provide technical input related to electrical services.</p></li><li><p>Ensure all drawings and models are completed within the agreed project schedule.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s Degree or Diploma in Electrical Engineering or a related</p></li><li><p>Minimum 4–6 years of experience as an Electrical BIM Modeler in construction/MEP projects.</p></li><li><p>GCC experience is preferred.</p></li><li><p>Strong hands-on experience in Revit MEP is essential.</p></li><li><p>Good knowledge of AutoCAD and Navisworks.</p></li></ul>

<p>We are hiring for one of our prestigious clients in Saudi Arabia for the following position: Position: Project Manager Cross-Country Pipeline Division: PMT Location: Saudi Arabia Educational Qualification: B.E./B.Tech in Mechanical Engineering (Preferred) Experience: 8 10+ years of experience in EPC Oil &amp; Gas Projects. Proven experience in the construction of Cross-Country Pipelines . Strong background in Engineering, Procurement, Construction (EPC), Pre-Commissioning, Commissioning, and Handover of hydrocarbon facilities. Key Responsibilities: Oversee and manage the complete project lifecycle from conceptual design through detailed engineering, procurement, construction, pre-commissioning, commissioning, and final handover. Execute projects involving hydrocarbon facilities, cross-country pipelines, piping systems, process equipment installation, structural steel fabrication and erection, civil works, electrical &amp; instrumentation, communication systems, and associated infrastructure. Lead and coordinate multidisciplinary engineering, procurement, construction, planning, and project control teams. Manage subcontractors and ensure timely execution of project activities. Review project scope, establish schedules, monitor deliverables, and ensure completion within budget and contractual timelines. Monitor project performance with respect to schedule, cost, quality, safety, and HSE compliance. Maintain strong relationships with clients' senior management and attend regular project review meetings. Ensure compliance with contractual terms and conditions throughout project execution. Identify opportunities for project optimization and efficient resource utilization. Prepare internal and external progress reports highlighting achievements, risks, and areas of concern. Oversee project budgets and maintain financial accountability. Identify, prepare, and negotiate contractual variations, change orders, and claims with clients. Provide technical guidance and practical solutions to meet client requirements. Support Engineering and Procurement teams throughout project execution. Ensure effective planning, scheduling, project controls, and resource management. Lead engineering management, procurement management, construction management, and subcontractor performance. Ensure compliance with international standards, quality requirements, and QHSE procedures. Coordinate project teams across all execution phases and ensure seamless communication among stakeholders. Establish project administration procedures, monitor project controls, and maintain proper documentation. Identify project interdependencies and proactively mitigate associated risks. Conduct periodic project performance reviews and implement continuous improvement initiatives. Supervise the selection of construction tools, materials, equipment, and inventory management. Review daily site progress and prepare weekly and monthly look-ahead plans. Analyze project risks and implement mitigation strategies. Ensure all contractual performance obligations are achieved. Liaise with QHSE teams to ensure full compliance with company policies and international standards. Demonstrate strong knowledge of international engineering codes and standards applicable to pipeline projects.</p><p><strong>Desired Candidate Profile</strong></p><p>B.E./B.Tech in Mechanical Engineering (Preferred) Experience: 8 10+ years of experience in EPC Oil &amp; Gas Projects. Proven experience in the construction of Cross-Country Pipelines . Strong background in Engineering, Procurement, Construction (EPC), Pre-Commissioning, Commissioning, and Handover of hydrocarbon facilities.</p>

<em>Certified as a Top Employer; KONE is dedicated to a better world of work and exhibits this through excellent people practices. We are committed to fostering a great work culture and inspiring the highest standards of quality and efficiency putting our people first and creating a workplace that nurtures collaboration, diversity, growth and wellbeing. <br><br></em><em><strong>It's time to make a move. Join our flow. <br><br></strong></em>We have an exciting opportunity for an experienced <strong>Quality Engineer</strong>, who will be assures quality requirements for the organization. he identifies and drives continuous improvement projects by data analysis, inspections and testing.<br><br>Quality Engineer actively builds and spreads quality awareness within the organization by giving training and sharing best business practices. S/he supports the Quality Manager with the deployment of KONE’s quality strategy, governance and goals.<br><br><em><strong>What will you do?<br><br></strong></em><ul><li>Prioritize quality performance improvement based on data analysis</li><li> Use continuous improvement methodologies to investigate non-conformances and determine root cause, identify corrective actions, and drive actions to closure</li><li>Create and analyses large datasets from multiple platforms and analyses trends.</li><li>Support Quality Manager with target setting.</li><li> Perform in-process or product inspections and execute measures, tests, sampling methods, and other procedures to validate that requirements are met.</li><li> Maintain and update quality records required by the quality procedures.</li><li> Shares skills and knowledge with the organization about quality methodology and tools and ensures they understand and develop the capability to execute the learnings with established quality procedures and standards.</li><li> Supports the quality manager with internal and external audits.</li><li> Is responsible for coordinating preventive and corrective actions of Quality Improvement teams in her/his area.<br><br></li></ul><em><strong>Are you the one?<br><br></strong></em><ul><li>Bachelor’s Degree in Mechanical or Electrical Engineering.</li><li>4 to 5 Years of Experience in Elevators &amp; Escalators industry with a proven track record in a similar role.</li><li>Quality Certificate ISO 9001 is recommended.</li><li>Deep knowledge of quality assurance terminology, methods, and tools</li><li>Superb computer skills, including database management..</li><li>Excellent analytical, problem-solving, and decision-making skills.</li><li>Proficiency in best practices for testing, version control, and defect management.</li><li>Professional certification, such as Six Sigma, CQE, or CQA.</li><li>Excellent skills in computer (Word, Excel, PowerPoint).<br><br></li></ul><em>At KONE, we are focused on creating an innovative and collaborative working culture where we value the contribution of each individual. Employee engagement is a key focus area for us and we encourage participation and the sharing of information and ideas. Sustainability is an integral part of our culture and the daily practice. We follow ethical business practices and we seek to develop a culture of working together where co-workers trust and respect each other and good performance is recognized. In being a great place to work, we are proud to offer a range of experiences and opportunities that will help you to achieve your career and personal goals and enable you to live a healthy and balanced life.<br><br></em>Read more on <em>https://careers.kone.com/en/</em>

<p>The Launch Engineer is responsible for planning, coordinating, and executing all launch activities associated with new vehicle programs, engineering changes, and manufacturing readiness. This role serves as a key interface between Engineering, Manufacturing, Quality, Supply Chain, Logistics, Program Management, and Product Development teams to ensure successful vehicle launches from concept through Start of Production (SOP). The Launch Engineer leads readiness assessments, build event coordination, issue management, validation activities, and operational readiness execution to ensure safety, quality, cost, timing, and volume objectives are achieved.</p><p>Key Responsibilities</p><ul><li>Launch Planning &amp; Readiness Support the development and execution of launch plans for new vehicle programs and major product changes. Update launch deliverables, milestones, and readiness criteria. Coordinate cross-functional activities to ensure launch requirements are achieved. Monitor launch timing and escalate risks that may impact program objectives. Support Open-to-Go assessments and build readiness reviews.</li><li>Build Event Coordination Lead preparation and execution of prototype, pilot, validation, and production builds. Coordinate vehicle scheduling and build plans with all participating functions. Ensure materials, tooling, equipment, manpower, and documentation are available and ready. Facilitate daily build reviews and issue resolution meetings. Track build performance metrics and lessons learned.</li><li>Issue Management &amp; Problem Resolution Collect, document, prioritize, and monitor launch-related issues. Drive closure plans with responsible teams. Utilize structured problem-solving methodologies to resolve launch issues. Escalate critical issues to leadership when required. Track issue trends and support management reporting.</li><li>Manufacturing Readiness Assess manufacturing process readiness against launch requirements. Support validation of equipment, tooling, automation, software, and production systems. Verify operational readiness of manufacturing shops. Ensure readiness metrics are achieved prior to production milestones.</li><li>Product &amp; Process Validation Support new product introduction (NPI) activities. Coordinate vehicle and process validation builds. Ensure engineering changes are properly implemented and validated. Track launch quality metrics and process capability indicators. Support root cause analysis and corrective action implementation.</li><li>Cross-Functional Leadership Facilitate communication between Engineering, Manufacturing, Quality, Supply Chain, Program Management, Logistics, and Supplier teams. Drive alignment on launch priorities and deliverables. Lead launch meetings and action-item tracking. Provide launch status updates to management and executive leadership.</li><li>Reporting &amp; Governance Develop launch readiness dashboards and reports. Maintain launch scorecards and milestone trackers. Support Launch Governance Reviews and executive launch reporting. Present launch status, risks, countermeasures, and recovery plans.</li><li>Continuous Improvement Capture lessons learned from launch activities. Support development of launch standards and best practices. Identify opportunities to improve launch efficiency and risk management processes. Contribute to future program readiness and organizational learning.</li></ul><p>Skills</p><ul><li>Deep understanding of vehicle assembly.</li><li>Understanding of APQP principles</li><li>Aware of Project management fundamentals</li><li>Experience with Data analysis and reporting tools</li><li>Microsoft Office Suite (Excel, Power BI, PowerPoint)</li><li>Experience launching manufacturing and production lines.</li><li>Hands-on experience with process validation, commissioning, and manufacturing quality systems.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Mechanical, Electrical, or Mechatronics Engineering (Master's preferred).</li><li>3+ years of experience in automotive manufacturing.</li></ul>