Maintenance Engineer Jobs in Saudi

The LOTO Engineer is responsible for developing, implementing, and managing the Lockout/Tagout (LOTO) and Energy Isolation Program during construction completion, pre-commissioning, commissioning, testing, and plant handover activities. The role ensures personnel safety by preventing inadvertent energization, startup, release of stored energy, or operation of equipment during work execution. The LOTO Engineer shall coordinate all isolation activities between EPC Contractors, OEMs, Commissioning Teams, Construction, HSE, and future Operations personnel.<br><br>Key Responsibilities LOTO Program Development Review and maintain the project Lockout/Tagout (LOTO) Procedure in accordance with project requirements, international standards, and company HSE policies Establish isolation management processes for mechanical, electrical, instrumentation, hydraulic, pneumatic, chemical, and thermal energy sources Develop isolation boundaries and energy isolation philosophy for all plant systems Ensure compliance with OSHA, NFPA 70E, IEC, and project-specific safety requirements<br>Isolation Planning and Coordination Review commissioning schedules and identify isolation requirements for testing and energization activities Coordinate with Construction, Commissioning, System Completion, and EPC teams to plan safe equipment release and energization Participate in System Handover and Ready for Commissioning reviews Ensure isolations are properly planned before commencement of commissioning activities<br>Commissioning Support Support first energization activities for:Gas Turbine Generator systems Steam Turbine systems HRSG systems Electrical substations MV and LV distribution systems DCS and control systems Auxiliary systems Coordinate temporary and permanent isolations during commissioning and testing Ensure safe management of simultaneous operations (SIMOPS)<br>Documentation and Reporting Maintain LOTO registers and isolation logs Track active isolations and provide daily isolation status repots Maintain isolation drawings, single-line diagrams, and mark-ups Prepare weekly and monthly reports on isolation activities and compliance<br>Training and Awareness Deliver LOTO awareness and competency training to project personnel Conduct toolbox talks and safety briefings related to energy isolation Support contractor onboarding regarding project LOTO requirements<br>Audits and Compliance Conduct routine audits of active isolations Identify and close LOTO-related non-conformances Participate in incident investigations involving energy isolation Recommend improvements to strengthen isolation controls<br>Qualifications Education Bachelor’s degree in electrical engineering, Mechanical Engineering, Instrumentation Engineering, or equivalent Experience Minimum 10 years of experience in power generation Minimum 5 years of experience in commissioning, startup, operations, or energy isolation management Experience with Combined Cycle Power Plants is preferred. Experience in commissioning and startup of CCGT projects <br>Technical Knowledge Lockout/Tagout systems and procedures. Permit-to-Work systems. Electrical safety and switching operations. Mechanical isolation techniques. Commissioning and startup processes. System Completion and Turnover processes. SIMOPS management. Risk assessment and Job Safety Analysis.<br>Preferred Certifications OSHA 30-Hour Construction Safety. NFPA 70E Awareness. Authorized LOTO Coordinator Training. NEBOSH IGC (preferred). Electrical Safety Training.

About Evostel:Evostel (previously AQESA), is part of the Ali Zaid Al Quraishi & Brothers Company (AZAQ Group), a closed joint stock company with a diversified investment portfolio. The Group takes pride in its Saudi roots and has been successfully operating in the GCC region for over 60 years. The Group has long-established associations and strategic relationships with several well-known international names.<br>Senior Sales Engineer – Electrical & Automation Solutions Job Purpose Collaborate with Sales team to produce technical, architectural, and engineering deliverables that lead to generate profitable sales. Serve customers by identifying their needs and engineer adaptations of products, equipment and services that ensure high customer satisfaction levels. Measures of success include new customer acquisition rates, renewal rates, up-selling, cross-selling and contribution to overall sales team.<br>Key Responsibilities Sales & Business Development Support the full sales cycle from customer engagement to project award. Identify customer requirements and recommend suitable technical solutions. Prepare and deliver technical presentations and product demonstrations. Develop opportunities within assigned accounts and maintain customer relationships. Support RFP/RFQ/RFI responses and proposal preparation. Gather market and competitor intelligence. Technical & Engineering Support Review customer specifications, drawings, and bid documents. Design and recommend Electrical and Automation solutions. Prepare technical and commercial quotations. Conduct site visits and technical assessments. Provide technical clarification to customers and suppliers throughout the bidding process. Prepare technical submittals, documentation, and final project dossiers. Procurement & Vendor Coordination Obtain quotations from suppliers and evaluate technical compliance. Coordinate with vendors on pricing, delivery schedules, and technical requirements. Issue purchase orders and monitor supplier commitments. Order & Delivery Management Review customer purchase orders for technical and commercial accuracy. Coordinate with logistics, warehouse, finance, and suppliers to ensure timely delivery. Support order execution until customer acceptance and project completion. Reporting & Administration Maintain accurate CRM and sales records. Monitor open orders and delivery status. Track customer receivables in coordination with finance. Ensure compliance with company policies and ISO procedures.<br>Qualifications Education Bachelor's Degree in Electrical Engineering or a related Engineering discipline. Experience Minimum 6 years of experience in technical sales, electrical engineering, or automation solutions. Languages Fluent English (Required) Arabic (Preferred) Certification CRM Certification (Preferred)<br>Required Knowledge Saudi Electrical & Automation market. Power Distribution Systems. Low & Medium Voltage Switchgear. Industrial Automation Systems. Sales and Business Development. Techno-commercial proposal preparation. Skills Technical Sales Proposal & Tender Preparation Customer Relationship Management Negotiation & Influencing Presentation Skills Analytical Thinking Communication Skills Teamwork Microsoft Office Core Competencies Customer Focus Results Orientation Problem Solving Initiative Business Acumen Leadership Time Management Decision Making

Matar Holding is seeking a highly motivated and experienced Procurement Engineer to manage procurement activities for Saudi Aramco and other Oil & Gas projects within our fabrication facility. The ideal candidate must have extensive experience procuring materials and services for the manufacturing of Pressure Vessels, Heat Exchangers, Shell & Tube Heat Exchangers, Structural Steel, Process Equipment, HVAC and Piping Systems in accordance with Saudi Aramco and international standards.<br><br>The Procurement Engineer will be responsible for the complete procurement cycle, including supplier sourcing, commercial negotiations, purchase order management, expediting, vendor evaluation, logistics coordination, and ensuring the timely delivery of materials required for production and project execution. The successful candidate should have strong knowledge of the Saudi market, Aramco-approved suppliers, and fabrication industry procurement practices.<br><br>Should have hands on experience in Pressure Vessel, Heat Exchanger, Skids manufacturing companies.<br><br>Requirements<br><br>Procurement & Sourcing<br><br>Source and procure materials, equipment, and services for Saudi Aramco fabrication projects Identify and develop reliable local and international suppliers Obtain competitive quotations, perform commercial evaluations, and negotiate pricing, payment terms, and delivery schedules Prepare and issue Purchase Orders (POs) in accordance with company procedures Ensure procurement activities comply with project specifications, Saudi Aramco requirements, and company procurement policies<br><br>Material Procurement<br><br>Responsible for procuring:<br><br>Pressure Vessel materials Heat Exchanger components Shell & Tube Heat Exchanger materials Structural Steel Stainless Steel and Carbon Steel plates Pipes, fittings, and flanges Valves and instrumentation items Welding consumables Fabrication tools and production consumables Mechanical equipment and spare parts Electrical and instrumentation materials<br><br>Vendor Management<br><br>Develop and maintain relationships with Aramco-approved vendors and manufacturers Evaluate supplier performance based on quality, delivery, pricing, and service Conduct supplier audits and vendor qualification activities when required Maintain an updated approved vendor list<br><br>Project Coordination<br><br>Coordinate closely with Engineering, QA/QC, Planning, Production, and Project Management teams Review Material Requisitions (MR), Bill of Materials (BOM), and technical specifications Monitor procurement schedules to ensure timely material availability Expedite suppliers to prevent project delays Resolve procurement-related technical and commercial issues<br><br>Documentation & Compliance<br><br>Ensure procurement documentation is complete and traceable Verify compliance with Saudi Aramco specifications such as SAMSS, IR Form,SAEP , Inspection Requirements, PIM, ASME codes, and project requirements Coordinate material inspection, certification, and documentation before delivery Maintain procurement reports and supplier performance records<br><br>Cost Control<br><br>Identify cost-saving opportunities through strategic sourcing and negotiations Analyze market trends and recommend alternative suppliers or materials where appropriate Support inventory optimization and procurement planning<br><br>Qualifications<br><br>Bachelor's Degree in Mechanical Engineering, Industrial Engineering, Supply Chain, or a related field Professional procurement certification is an advantage<br><br>Experience<br><br>Minimum 5-8 years of procurement experience in the fabrication industry Mandatory experience handling Saudi Aramco projects

About Evostel:Evostel (previously AQESA), is part of the Ali Zaid Al Quraishi & Brothers Company (AZAQ Group), a closed joint stock company with a diversified investment portfolio. The Group takes pride in its Saudi roots and has been successfully operating in the GCC region for over 60 years. The Group has long-established associations and strategic relationships with several well-known international names.<br>Senior Sales Engineer – Electrical & Automation Solutions Job Purpose Collaborate with Sales team to produce technical, architectural, and engineering deliverables that lead to generate profitable sales. Serve customers by identifying their needs and engineer adaptations of products, equipment and services that ensure high customer satisfaction levels. Measures of success include new customer acquisition rates, renewal rates, up-selling, cross-selling and contribution to overall sales team.<br>Key Responsibilities Sales & Business Development Support the full sales cycle from customer engagement to project award. Identify customer requirements and recommend suitable technical solutions. Prepare and deliver technical presentations and product demonstrations. Develop opportunities within assigned accounts and maintain customer relationships. Support RFP/RFQ/RFI responses and proposal preparation. Gather market and competitor intelligence. Technical & Engineering Support Review customer specifications, drawings, and bid documents. Design and recommend Electrical and Automation solutions. Prepare technical and commercial quotations. Conduct site visits and technical assessments. Provide technical clarification to customers and suppliers throughout the bidding process. Prepare technical submittals, documentation, and final project dossiers. Procurement & Vendor Coordination Obtain quotations from suppliers and evaluate technical compliance. Coordinate with vendors on pricing, delivery schedules, and technical requirements. Issue purchase orders and monitor supplier commitments. Order & Delivery Management Review customer purchase orders for technical and commercial accuracy. Coordinate with logistics, warehouse, finance, and suppliers to ensure timely delivery. Support order execution until customer acceptance and project completion. Reporting & Administration Maintain accurate CRM and sales records. Monitor open orders and delivery status. Track customer receivables in coordination with finance. Ensure compliance with company policies and ISO procedures.<br>Qualifications Education Bachelor's Degree in Electrical Engineering or a related Engineering discipline. Experience Minimum 6 years of experience in technical sales, electrical engineering, or automation solutions. Languages Fluent English (Required) Arabic (Preferred) Certification CRM Certification (Preferred)<br>Required Knowledge Saudi Electrical & Automation market. Power Distribution Systems. Low & Medium Voltage Switchgear. Industrial Automation Systems. Sales and Business Development. Techno-commercial proposal preparation. Skills Technical Sales Proposal & Tender Preparation Customer Relationship Management Negotiation & Influencing Presentation Skills Analytical Thinking Communication Skills Teamwork Microsoft Office Core Competencies Customer Focus Results Orientation Problem Solving Initiative Business Acumen Leadership Time Management Decision Making

Company Description Ironwood Solutions is a Riyadh-based interior design and project delivery firm specializing in high-end commercial and residential spaces across Saudi Arabia and the GCC. Founded in 2016, the company integrates interior design, brand identity, sensory design, furnishing, project management, and full execution into a single, cohesive service. This end-to-end approach keeps each project aligned to one clear vision from concept through completion, avoiding fragmented vendor handoffs. Ironwood Solutions partners with businesses seeking branded environments and individuals looking for distinctive homes, with a strong focus on design quality and on-schedule delivery. The team is based in Al Olaya, Riyadh, and works closely with clients who value consistent identity and reliable execution. Role Description The Technical Interior Engineer is a full-time, on-site role based in Riyadh, responsible for translating design concepts into precise, buildable technical solutions. This role involves developing detailed drawings and technical specifications, coordinating with interior designers, project managers, and contractors to ensure designs are feasible and aligned with codes and standards. Daily tasks include reviewing structural and MEP requirements, validating materials and finishes, preparing shop drawings, and resolving technical issues that arise during construction and installation. The Technical Interior Engineer monitors site progress, conducts inspections to confirm design compliance, and updates documentation to reflect changes. This position supports smooth project execution by bridging design intent with practical implementation and ensuring quality and safety across all phases of delivery. Things will be working on:BOQsShop Drawings Quotations Technical challenges on the design<br>Qualifications Candidates should possess strong technical design skills, including proficiency in CAD and BIM tools (e.g., Auto CAD, Revit), detailed drawing production, and coordination of layouts for interior fit-out. Candidates should possess skills in interior engineering and construction, including knowledge of materials and finishes, joinery and fit-out details, and integration with structural and MEP systems. Candidates should possess project coordination skills, including collaboration with designers, contractors, and suppliers, managing technical documentation, and supporting timelines and budgets. Candidates should possess quality and compliance skills, including familiarity with local building codes and regulations, safety standards, and best practices for luxury commercial and residential interiors. Candidates should possess strong analytical, problem-solving, and communication skills, with attention to detail and the ability to handle multiple projects simultaneously. Bachelor’s degree in Interior Engineering, Architecture, Civil Engineering, or a closely related field is preferred, along with prior experience in interior fit-out or design-build environments. Experience working in Saudi Arabia or the GCC, and professional proficiency in English; Arabic language skills are an advantage.

Company Description Remedium Network is a Saudi Arabia–based provider of Sustainability (ESG) management software and consulting services, founded in 2021. The organization offers industry-agnostic solutions that help companies across sectors take practical climate action, with a particular focus on the Saudi market since its debut in May 2023. Remedium Network serves a growing portfolio of reputable clients by combining scientific rigor with engineering-driven methodologies. The team is dedicated to making climate action accessible, measurable, and impactful for organizations ready to advance their sustainability goals. Potential applicants will join a mission-oriented company at the forefront of climate technology and advisory services. Role Description The Artificial Intelligence Engineer will work full time on-site in Jeddah, contributing to the design, development, and deployment of AI models that support ESG reporting management and climate action solutions. Day-to-day responsibilities include researching and implementing machine learning and deep learning algorithms, developing and optimizing our LLM workflows, and managing our on-prem GPU-Accelerated Server to process and analyze environmental and operational data. The role involves close collaboration with software developers, data scientists, and climate consultants to integrate AI models into production systems and ensure scalability, reliability, and performance. The AI Engineer will also participate in code reviews, maintain documentation, and support continuous model improvement based on client feedback and new scientific insights. This position is suited to individuals who enjoy working at the intersection of AI, engineering, and sustainability. Qualifications Strong foundation in Computer Science, including data structures, algorithms, and software engineering principles. Proficiency in LLM's and Neural Networks for building and optimizing machine learning and deep learning models. Experience with Natural Language Processing (NLP), including text processing, model training, and evaluation for real-world applications. Hands-on Software Development skills in languages such as Python, Shell, and Typescript, and familiarity with AI/ML frameworks (e.g., Tensor Flow, PyTorch, scikit-learn). Experience or familiarity with Web Development frameworks such as Svelte and Fast-APIBachelor’s or Master’s degree in Computer Science, Artificial Intelligence, Data Science, or a related engineering field. Experience working with large datasets, data pipelines, and cloud or distributed computing environments. Strong analytical and problem-solving abilities, with attention to code quality, testing, and documentation. Ability to collaborate effectively in cross-functional teams and communicate complex technical concepts clearly to non-technical stakeholders. Interest or prior experience in climate tech, environmental analytics, or sustainability-focused projects is highly beneficial. Interest or experience in Linux operating systems, SSH, and Networks is a plus. Interest or Experience in Docker, Docker compose, or Containerization is a plus.

About Evostel:Evostel (previously AQESA), is part of the Ali Zaid Al Quraishi & Brothers Company (AZAQ Group), a closed joint stock company with a diversified investment portfolio. The Group takes pride in its Saudi roots and has been successfully operating in the GCC region for over 60 years. The Group has long-established associations and strategic relationships with several well-known international names.<br>Senior Sales Engineer – Electrical & Automation Solutions Job Purpose Collaborate with Sales team to produce technical, architectural, and engineering deliverables that lead to generate profitable sales. Serve customers by identifying their needs and engineer adaptations of products, equipment and services that ensure high customer satisfaction levels. Measures of success include new customer acquisition rates, renewal rates, up-selling, cross-selling and contribution to overall sales team.<br>Key Responsibilities Sales & Business Development Support the full sales cycle from customer engagement to project award. Identify customer requirements and recommend suitable technical solutions. Prepare and deliver technical presentations and product demonstrations. Develop opportunities within assigned accounts and maintain customer relationships. Support RFP/RFQ/RFI responses and proposal preparation. Gather market and competitor intelligence. Technical & Engineering Support Review customer specifications, drawings, and bid documents. Design and recommend Electrical and Automation solutions. Prepare technical and commercial quotations. Conduct site visits and technical assessments. Provide technical clarification to customers and suppliers throughout the bidding process. Prepare technical submittals, documentation, and final project dossiers. Procurement & Vendor Coordination Obtain quotations from suppliers and evaluate technical compliance. Coordinate with vendors on pricing, delivery schedules, and technical requirements. Issue purchase orders and monitor supplier commitments. Order & Delivery Management Review customer purchase orders for technical and commercial accuracy. Coordinate with logistics, warehouse, finance, and suppliers to ensure timely delivery. Support order execution until customer acceptance and project completion. Reporting & Administration Maintain accurate CRM and sales records. Monitor open orders and delivery status. Track customer receivables in coordination with finance. Ensure compliance with company policies and ISO procedures.<br>Qualifications Education Bachelor's Degree in Electrical Engineering or a related Engineering discipline. Experience Minimum 6 years of experience in technical sales, electrical engineering, or automation solutions. Languages Fluent English (Required) Arabic (Preferred) Certification CRM Certification (Preferred)<br>Required Knowledge Saudi Electrical & Automation market. Power Distribution Systems. Low & Medium Voltage Switchgear. Industrial Automation Systems. Sales and Business Development. Techno-commercial proposal preparation. Skills Technical Sales Proposal & Tender Preparation Customer Relationship Management Negotiation & Influencing Presentation Skills Analytical Thinking Communication Skills Teamwork Microsoft Office Core Competencies Customer Focus Results Orientation Problem Solving Initiative Business Acumen Leadership Time Management Decision Making

Summary:We are looking for a BMS Engineer to join our team and support the execution, installation supervision, testing, commissioning, and handover of Building Management System works. The candidate should have practical site experience, strong technical understanding of BMS field devices and controllers, HVAC systems and the ability to coordinate effectively with project stakeholders. <br>Job Overview: Position: BMS Engineer Work Location: Projects Employment Focus: Site supervision, testing, commissioning, configurations, troubleshooting, documentation, and handover support Preferred Scope: BMS installations, DDC panels, field devices, HVAC controls, BMS communication networks, integrations, programming, graphics, alarms, and system operation<br>Key Responsibilities: Supervise BMS installation activities at site, including 1st, 2nd & 3rd fix works. Review site works to ensure compliance with approved drawings, specifications, material submittals, method statements, and quality requirements. Perform testing and commissioning activities, including point-to-point testing, loop checking, functional testing, sequence verification, alarm testing, and system readiness checks. Support controller configuration, programming modifications, graphics configuration, alarm configurations, and testing-related software changes required for commissioning and handover. Troubleshoot issues related to BMS controllers, sensors, actuators, communication networks, graphics, alarms, trends, and system operation. Coordinate with engineering, construction, QA/QC, vendors, subcontractors, and client representatives to close site issues and complete commissioning activities. Prepare and maintain testing records, commissioning reports, punch lists, inspection requests, redline markups, and handover documentation. Support client inspections, demonstrations, training sessions, and final system acceptance. Ensure that all site activities are performed safely and in accordance with project requirements, permits, and applicable procedures.<br>Requirements: Bachelor's degree or diploma in Electrical, Electronics, Instrumentation, Mechanical, Controls, or a related engineering field. Hands-on experience in BMS installation, testing, commissioning, and site supervision. Good understanding of HVAC control systems, DDC controllers, field devices, control wiring, networking, and BMS graphics. Ability to read and understand wiring drawings, shop drawings, wiring diagrams, control schematics, IO lists, and sequence of operation documents. Experience with major BMS platforms and Tridium is preferred. Strong troubleshooting, coordination, reporting, and documentation skills. Ability to work independently at site and follow up with multiple stakeholders until issues are closed. Some degree of experience with BMS design (IO lists, BOMs, Schematic Flow Drawings, Network Risers, Shop Drawings etc.)<br>Extra Value for:Experience with DEOS is significant added value Experience with Niagara Experience with SCADA systems Experience with other LC systems, such as Access Control, Fire Alarm, Lighting Control etc. Experience with MCCs and MCC design Any additional trainings and certifications related to the field Previous experience in Saudi Aramco, healthcare, commercial, or industrial projects is an advantage.

ABOUT THE JOB<br>We are currently seeking a highly skilled Senior Quality Engineer to join our Project and Construction Management team in Riyadh.<br>This opportunity lies within our Infrastructure Division and requires specific expertise in working on Civil Engineering and Transportation projects, particularly those involving roads, highways, bridges, and tunnels in urban environments.<br>KEY RESPONSABILITIES<br>Main descriptions of the job position:Monitor and inspect construction processes to ensure quality standards are met. Analyze data to identify areas for improvement in the construction process. Train and supervise staff on quality assurance practices. Participate in internal and external audits to ensure compliance with quality standards. Develop and maintain quality documentation, including test plans and protocols. Investigate Client complaints and implement corrective actions. Monitor inventory of materials and supplies to ensure quality. Collaborate with other departments to ensure quality of finished works.<br>ABOUT YOUBachelor's degree in Civil Engineering, Quality Assurance, Quality Management, or related field. Qualified with relevant Quality Qualifications: CQE (Certified Quality Engineer), CQA (Certified Quality Auditor), MQM (Master Quality Manager). Applicable Experience: over 12 years, mainly as a Consultant. Candidates with exclusive contractors experience will not be taken into consideration. At least experience in 1 or more projects of ROADS. Candidates without clear ROAD experience will not be taken into consideration. Proficiency level of English language. Arabic Language is a plus. Excellent communication skills. Report writing skills, social skills, communication, teamwork, problem solving, autonomy, flexibility, and technical rigor. Willingness to work in a multinational environment firm.<br>Additional requirements:<br>Transferable Iqama in case non-Saudi. Based in Riyadh. Valid SCE membership.<br><br><br>Only Linkedin CVs will be checked; we do not receive applications at our offices.<br><br><br>ABOUT US<br>We are an international consultancy working in the areas of engineering and architecture on projects that contribute to a more sustainable world. Our ownership structure creates a culture of engagement, offering the best service to our clients while fostering professional and personal development.<br>Therefore, our most important assets are the expertise and experience of our team. Highly qualified and skilled professionals, deeply united, working within a framework of professional freedom and integrity, with a strong commitment to progress, professional development, quality of service and innovation.<br>Since IDOM’s foundation in 1957, we have grown steadily to become a multidisciplinary and integrated multinational organization, with more than 5,000 people working in over 145 countries.<br>Are you ready to take the next step? As a member of our TEAM, you will have the opportunity for career development at the highest level in an environment of respect and professional integrity. Send us your CV if you share our philosophy and want to be part of our company. We look forward to meeting you!

Job Title: Cost Control Engineer Location: Saudi Arabia<br>Role Purpose The Cost Control Engineer is responsible for maintaining effective cost management systems across projects to ensure alignment with approved budgets and corporate financial objectives. The role oversees cost tracking, forecasting, and reporting, ensuring cost data integrity, transparency, and integration with planning and procurement systems. Works closely with project management, finance, and procurement teams to support proactive decision-making, cost optimization, and compliance with project control standards.<br>Key Accountabilities Key Activities Cost Monitoring & Reporting Track and monitor project expenditures, commitments, and accruals in coordination with planning, procurement, commercial and finance teams. Prepare periodic-to-date cost performance reports comparing actual vs. budgeted costs, highlighting key variances. Analyze cost deviations and recommend corrective measures to project management. Ensure cost reports are aligned with project schedules and earned value metrics. Budgeting & Forecasting Participate in the preparation of project budgets and cost baselines, ensuring accuracy and compliance with PMO standards. Update forecasts based on progress, scope changes, and market trends. Provide input for project cash flow projections and financial planning. Support management in developing estimate-at-completion analysis. Cost Analysis & Validation Review purchase orders, subcontracts, and variation orders to validate cost impacts. Verify coding structures and cost allocations across cost centers and WBS elements. Verifying contractor invoices. Ensure traceability of all cost transactions through ERP systems. Coordination & Support Collaborate with project managers, planners, accountants and procurement teams to maintain accurate cost data. Provide analytical support and cost performance presentations to management. Assist in cost close-out, reconciliation, and lessons-learned activities. Ensure integration of cost data with planning, finance and risk functions. Systems & Continuous Improvement Maintain and enhance cost databases, dashboards, and digital reporting tools. Contribute to the development and standardization of cost control procedures, coding library, templates, and workflows. Promote continuous improvement in cost management practices through automation and digitalization.<br>JOB SPECIFICATIONSIndustry / Domain Project Controls, Cost Management, Construction, Infrastructure, and Oil & Gas. Necessary Knowledge and Experience Minimum of 2–4 years of experience in cost control or project controls within construction or oil & gas industries. Strong understanding of cost accounting, budgeting, and forecasting principles. Proficient in ERP systems (SAP, Oracle, or similar) and advanced Excel tools. Familiar with project control standards and earned value management (EVM). Education and Certification Minimum Requirements Bachelor’s degree in engineering. Certification in cost engineering (e.g., CCP, AACE, or PMP) preferred. Job Specific Technical Skills Cost tracking and reporting. Budgeting and variance analysis. ERP and cost management software proficiency. Analytical, detail-oriented, and problem-solving mindset Strong communication and coordination skills with multidisciplinary teams Ability to link cost performance with schedule and risk data<br>Note: Prior experience with CCS & Oracle is preferred

Company Description Ironwood Solutions is a Riyadh-based interior design and project delivery firm specializing in high-end commercial and residential spaces across Saudi Arabia and the GCC. Founded in 2016, the company integrates interior design, brand identity, sensory design, furnishing, project management, and full execution into a single, cohesive service. This end-to-end approach keeps each project aligned to one clear vision from concept through completion, avoiding fragmented vendor handoffs. Ironwood Solutions partners with businesses seeking branded environments and individuals looking for distinctive homes, with a strong focus on design quality and on-schedule delivery. The team is based in Al Olaya, Riyadh, and works closely with clients who value consistent identity and reliable execution. Role Description The Technical Interior Engineer is a full-time, on-site role based in Riyadh, responsible for translating design concepts into precise, buildable technical solutions. This role involves developing detailed drawings and technical specifications, coordinating with interior designers, project managers, and contractors to ensure designs are feasible and aligned with codes and standards. Daily tasks include reviewing structural and MEP requirements, validating materials and finishes, preparing shop drawings, and resolving technical issues that arise during construction and installation. The Technical Interior Engineer monitors site progress, conducts inspections to confirm design compliance, and updates documentation to reflect changes. This position supports smooth project execution by bridging design intent with practical implementation and ensuring quality and safety across all phases of delivery. Things will be working on:BOQsShop Drawings Quotations Technical challenges on the design<br>Qualifications Candidates should possess strong technical design skills, including proficiency in CAD and BIM tools (e.g., Auto CAD, Revit), detailed drawing production, and coordination of layouts for interior fit-out. Candidates should possess skills in interior engineering and construction, including knowledge of materials and finishes, joinery and fit-out details, and integration with structural and MEP systems. Candidates should possess project coordination skills, including collaboration with designers, contractors, and suppliers, managing technical documentation, and supporting timelines and budgets. Candidates should possess quality and compliance skills, including familiarity with local building codes and regulations, safety standards, and best practices for luxury commercial and residential interiors. Candidates should possess strong analytical, problem-solving, and communication skills, with attention to detail and the ability to handle multiple projects simultaneously. Bachelor’s degree in Interior Engineering, Architecture, Civil Engineering, or a closely related field is preferred, along with prior experience in interior fit-out or design-build environments. Experience working in Saudi Arabia or the GCC, and professional proficiency in English; Arabic language skills are an advantage.

<p><p><br>Summary:<br>We are seeking a skilled Chemical Engineer Unit Head to oversee our Chemical Cleaning unit. The successful candidate will be responsible for managing the operations, leading the team, and ensuring the efficiency and effectiveness of the chemical cleaning processes.<br><br>Job Responsibility:<br>- Lead and manage the Chemical Cleaning unit, including overseeing operations, managing resources, and ensuring compliance with safety regulations.<br>- Develop and implement strategies to optimize chemical cleaning processes and improve overall efficiency.<br>- Coordinate with other departments to ensure seamless integration of chemical cleaning services into the overall operations.<br>- Train, mentor, and provide guidance to the team members to enhance their skills and performance.<br>- Monitor and analyze key performance indicators to identify areas for improvement and implement solutions accordingly.<br>- Collaborate with clients to understand their requirements and provide customized chemical cleaning solutions.<br>- Stay up-to-date with industry trends, technologies, and best practices to continuously improve the unit\'s performance.<br><br>Candidate Requirements:<br>- Bachelor\'s degree in Chemical Engineering or a related field. Master\'s degree is a plus.<br>- Proven experience in chemical cleaning operations, with a focus on managing teams and processes.<br>- Strong understanding of chemical cleaning principles, techniques, and equipment.<br>- Excellent leadership and communication skills to effectively lead and collaborate with a diverse team.<br>- Proficiency in analyzing data, identifying trends, and making data-driven decisions.<br>- Knowledge of safety regulations and best practices in chemical cleaning operations.<br>- Ability to multitask, prioritize work, and meet deadlines in a fast-paced environment.</p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Electrical Engineer (Contracts and Procurement) is a vital part of our team in the accounting field. This role aims to enhance operational efficiency for projects through effective management of procurement and contracts. You will have the opportunity to work with a diverse team of professionals, allowing you to develop your technical and managerial skills in a dynamic environment.</p><p>As part of this team, you will be able to explore multiple career paths, where we provide advanced training programs and guidance to team members. We believe that personal and professional growth is an integral part of our culture, and we encourage you to leverage available opportunities to expand your knowledge and skills. Continuous support from management will help you achieve your professional goals.</p><p>If you are looking for a work environment that encourages innovation and collaboration, we welcome you to be part of our team. We believe that every employee plays a crucial role in our collective success, and we will be glad to assist you in achieving your ambitions through your role as an Electrical Engineer (Contracts and Procurement) in our company.</p><p><b>Responsibilities:</b></p><ol><li>Manage procurement and contract operations for electrical projects, focusing on achieving efficiency and reducing costs through advanced project management systems.</li><li>Evaluate proposals submitted by suppliers and contractors, ensuring compliance with required standards and specifications, contributing to improved project quality.</li><li>Develop procurement strategies that enhance operational efficiency, analyzing data to identify potential cost-saving opportunities.</li><li>Collaborate with technical and engineering teams to ensure project requirements are met with the necessary materials and supplies, contributing to meeting the specified timelines.</li><li>Prepare regular reports on supplier and project performance, analyzing results to provide recommendations for improving operations.</li><li>Provide technical support to projects by assessing the suitability of materials and supplies, which enhances operational efficiency.</li><li>Build strong relationships with suppliers and contractors to ensure continuity of supplies and quality of materials, contributing to project success.</li><li>Participate in regular meetings with internal teams to discuss project progress and challenges, contributing to improved communication and coordination.</li><li>Provide training and support to new team members, helping to build a culture of continuous learning within the team.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Project Management: Ability to plan, organize, and manage projects effectively to achieve defined objectives.</li><li>Negotiation: Strong negotiation skills to secure the best terms with suppliers and contractors.</li><li>Data Analysis: Ability to analyze financial and commercial data to identify opportunities and challenges.</li><li>Communication: Effective communication skills to build strong relationships with internal teams and suppliers.</li><li>Strategic Thinking: Ability to develop procurement strategies that support company goals.</li><li>Technical Guidance: Providing technical advice on materials and supplies to ensure project requirements are met.</li><li>Training and Mentoring: Ability to train and mentor new team members to foster a culture of learning and growth.</li></ul></div>

As a Senior Software Engineer - Frontend (React) at Code Ninja, you will be integral to designing and developing cutting-edge frontend solutions. Your work will involve creating responsive and highly interactive web applications that enhance user engagement and performance. You will collaborate closely with designers and backend engineers to ensure seamless integration and optimal functionality. A strong focus on code quality, performance optimization, and user experience is paramount in this role.<br><br>Requirements<br><br>Must-Haves (Core Requirements)<br><br>Frontend Development<br><br> Extensive experience with React.js and React Native Strong proficiency in Java Script (ES6+) and Type Script In-depth knowledge of HTML5, CSS3, and modern frontend development practices Experience building scalable, maintainable, and reusable UI components <br><br>Mobile Application Development<br><br> Hands-on experience developing and maintaining cross-platform mobile applications using React Native Understanding of mobile application lifecycle, navigation, state management, and deployment processes Experience integrating native device features, APIs, and third-party libraries <br><br>Responsive & User-Centric Design<br><br> Experience developing responsive, visually appealing, and user-friendly interfaces across web and mobile platforms Strong understanding of modern CSS frameworks and styling solutions such as Tailwind CSS, Bootstrap, Styled Components, or Native Wind <br><br>State Management<br><br> Experience with state management solutions such as Redux, Redux Toolkit, Mob X, Zustand, or Context API <br><br>APIs & Integration<br><br> Strong experience integrating RESTful APIs and Graph QL Familiarity with Graph QL clients such as Apollo Client Experience handling authentication, authorization, and secure API consumption <br><br>Development Practices<br><br> Proficiency with Git and modern version control workflows Experience with automated testing frameworks such as Jest, React Testing Library, and React Native Testing Library Understanding of CI/CD pipelines and modern development workflows <br><br>Collaboration & Leadership<br><br> Ability to collaborate effectively with Product Managers, UI/UX Designers, Backend Engineers, and QA teams Experience mentoring junior developers and conducting code reviews Strong problem-solving, communication, and stakeholder management skills <br><br>Good-to-Haves (Preferred Qualifications)<br><br> Experience with Next.js and Server-Side Rendering (SSR) Experience with Expo and React Native ecosystem tools Familiarity with Progressive Web Applications (PWAs) Understanding of WCAG accessibility standards and inclusive design principles Experience with performance optimization tools such as Lighthouse, Web Page Test, and React profiling tools Knowledge of mobile app publishing processes for Google Play Store and Apple App Store Familiarity with analytics, crash reporting, and monitoring tools such as Firebase Analytics, Crashlytics, or Sentry Exposure to cloud platforms and frontend deployment practices <br><br>Ideal Experience<br><br> 4-7+ years of experience in frontend development At least 2+ years of hands-on React Native development Proven experience delivering production-grade web and mobile applications using React ecosystem technologies

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Senior Sales Engineer is responsible for achieving technical and commercial sales targets for power transformer products by providing specialized technical solutions to clients in the energy and industrial sectors, building long-term relationships with government and private entities, and ensuring the delivery of accurate technical and commercial proposals that align with project requirements&nbsp;</p><p>&nbsp;<b>What You’ll Bring :</b></p><ul><li>Identify and target new customers within the designated region who can benefit from power transformer products.&nbsp;</li><li>Conduct regular field visits to existing and potential clients to strengthen relationships and explore new business opportunities.&nbsp;</li><li>Collaborate closely with sales and engineering teams to understand customer requirements and provide the necessary technical support.&nbsp;</li><li>Achieve quarterly and annual sales targets through focused and effective sales strategies.&nbsp;</li><li>Prepare and analyse customer data, monitor performance indicators, and regularly update contact databases.&nbsp;</li><li>Secure new orders, renew contracts, and coordinate smooth delivery of products.&nbsp;</li><li>Recommend optimal products and tailored solutions that meet customer needs.&nbsp;</li><li>Contribute to product development efforts based on market demands and customer feedback.&nbsp;</li><li>Analyse tender documents and quantities, and provide well-studied technical and commercial assessments.&nbsp;</li><li>Coordinate with production and design teams to ensure final products meet client specifications and requirements.&nbsp;</li><li>Support the contracts management team throughout all project phases—from negotiation to signing and delivery.&nbsp;</li><li>Build and maintain strong professional relationships with utility companies, contractors, and consultants.&nbsp;</li><li>Monitor and analyse market trends and competitor activity to identify emerging opportunities.&nbsp;</li><li>Maintain full awareness of the company’s manufacturing and procurement strategies, as well as its production capabilities.&nbsp;</li><li>Provide after-sales support services to ensure client satisfaction and long-term cooperation.&nbsp;</li><li>Negotiate sales terms and conditions and successfully close deals.&nbsp;</li><li>Travelling to visit potential clients</li></ul><p><b>Preferred Qualifications :</b></p><p>&nbsp;<b>Academic and professional qualifications:&nbsp;</b>&nbsp;</p><ul><li>Bachelor’s degree in Electrical Engineering or an equivalent field&nbsp;&nbsp;</li><li>Certified Professional Sales Engineer (CPSE)&nbsp;</li><li>PMP is a plus&nbsp;</li></ul><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Experience:</b>&nbsp;</p><ul><li>At least 4 -7&nbsp;&nbsp;years of experience in sales of transformers or heavy electrical products.&nbsp;</li></ul><p><b>Skills &amp; Knowledge</b>&nbsp;&nbsp;</p><ul><li>Thorough knowledge of transformer types and designs (Step-up, Step-down, Dry type, Oil-immersed).&nbsp;</li><li>Ability to read and analyse electrical drawings (Single Line Diagrams, General Arrangement (GA) drawings).&nbsp;</li><li>Good knowledge of international standards (IEC, ANSI, IEEE).&nbsp;</li><li>Proficiency in using technical proposal tools and software (such as AutoCAD, and Excel).&nbsp;&nbsp;</li><li>Proficiency in using technical proposal tools and software (such as AutoCAD, and Excel).&nbsp;</li><li>Fluency in English, both spoken and written.&nbsp;</li><li>Excellent communication and interpersonal skills.&nbsp;&nbsp;</li><li>Problem-solving and critical-thinking skills.&nbsp;</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are on the lookout for a skilled Environmental Engineer to enhance our team at a leading accounting firm in Riyadh. The successful candidate will work in a dynamic environment where they will have the opportunity to apply their skills in problem-solving and critical thinking on diverse environmental projects. The role of the Environmental Engineer goes beyond applying technical knowledge; it also involves innovating sustainable solutions that contribute to improving the company's environmental performance.</p><p>At our company, we value continuous learning and provide opportunities for employees to develop their skills through specialized training programs and workshops. We believe that success comes from investing in our team, which is why we offer opportunities for professional growth and advancement. You will have the chance to work with a diverse group of professionals and projects, allowing you to expand your expertise and knowledge in new areas.</p><p>We are looking for someone who is passionate about the environment and eager to make a positive impact. If you are seeking to be part of a team striving for excellence in the field of environmental sustainability, we would love to hear from you. We believe that diversity in our backgrounds and ideas enhances innovation and leads to more effective solutions. As part of our team, you will play a vital role in developing environmental strategies that contribute to the success of our clients and assist in protecting our planet.</p><p><b>Responsibilities:</b></p><ol><li>Develop effective environmental strategies that align with the company's goals and ensure compliance with local and international environmental regulations.</li><li>Conduct comprehensive environmental impact assessments for current and future projects using advanced analytical tools to provide data-driven recommendations.</li><li>Collaborate with various specialized teams to design and implement innovative environmental solutions that enhance operational sustainability.</li><li>Provide technical guidance to clients on best environmental practices, contributing to improving the company's reputation and increasing client satisfaction.</li><li>Prepare regular reports detailing environmental performance and compliance, along with precise analyses to aid strategic decision-making.</li><li>Organize training workshops for employees to enhance environmental awareness and teach them how to implement sustainable practices in their daily work.</li><li>Monitor changes in environmental regulations and assess their impact on business operations, ensuring swift and effective adaptation.</li><li>Conduct in-depth research on new environmental technologies and provide ongoing recommendations for operational improvements.</li><li>Engage with governmental and non-governmental organizations to build strategic partnerships that enhance environmental sustainability efforts.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Data analysis for understanding environmental patterns and trends.</li><li>Strategic planning for developing sustainable projects.</li><li>Project management to ensure effective implementation of environmental solutions.</li><li>Effective communication with teams and stakeholders.</li><li>Familiarity with environmental regulations and standards.</li><li>Innovation in designing new environmental solutions and technologies.</li><li>Skills in presenting proposals to showcase results and recommendations clearly.</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>The Presales Engineer – Networking is responsible for designing, positioning, and supporting enterprise networking solutions for customers across the region.<br> The role acts as a technical advisor throughout the sales lifecycle, supporting opportunity qualification, solution design, technical presentations, and customer engagement activities.<br> Working closely with sales and delivery teams, the engineer develops scalable and high-performance networking solutions aligned with customer business and technical requirements.<br> The role focuses on enterprise networking technologies including routing, switching, wireless, and SD-WAN environments, while supporting solution positioning and customer success initiatives.<br> Responsibilities: Solutions Architecture &amp; Presales Support Design enterprise networking solutions aligned with customer requirements and business objectives Develop: High-Level Designs (HLD) Low-Level Designs (LLD) Technical proposals Bill of Quantities (BOQs) RFP/RFI responses Support networking solution architectures covering: LAN/WAN infrastructure Enterprise wireless solutions SD-WAN Network segmentation and connectivity Technical Expertise &amp; Solution Positioning Provide technical guidance on networking best practices, scalability, and infrastructure design Support positioning of Cisco-based networking solutions across enterprise environments Assist in solution comparison, technical assessments, and vendor positioning activities Stay updated on emerging networking technologies and vendor roadmaps Customer Engagement &amp; Technical Advisory Conduct customer meetings, workshops, presentations, and technical demonstrations Understand customer technical and business requirements and translate them into networking solutions Support technical discussions during pre-sales engagements and opportunity qualification Participate in Proof of Concepts (PoCs) and technical validation activities where required Cross-Functional Collaboration Work closely with Sales, Delivery, and Technical teams to ensure successful solution alignment and handover Support implementation readiness and technical clarification activities Contribute to customer success initiatives through technical support and engagement Documentation &amp; Best Practices Maintain accurate technical documentation and solution records Ensure proposed solutions align with customer standards and best practices Support continuous improvement of solution templates, technical documentation, and presales processes Bachelor’s degree in Computer Engineering, Network Engineering, or a related field 3–6 years of experience in networking, presales, or system integration environments Strong technical knowledge in: Routing &amp; Switching LAN/WAN networking TCP/IP, VLANs, BGP, OSPF Network design and architecture Enterprise wireless technologies SD-WAN fundamentals Experience developing: Technical proposals BOQs Network solution designs Good understanding of enterprise infrastructure environments Cisco networking technologies Hands-on or presales experience with: Fortinet solutions (basic security integration awareness is a plus)Experience supporting enterprise networking projects and customer engagements Strong customer-facing and technical solution positioning experience Certifications; Cisco (CCNA, CCNP), Fortinet (NSE 4 or above)</span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>Mindrift is looking for highly skilled Senior Python Data Scraping Engineers to join the Tendem project and drive specialized data scraping workflows within our hybrid AI + human system. In this role, as an AI Pilot that s how we refer to this role at Mindrift you ll collaborate with Tendem Agents that handle repetitive tasks, while you provide critical thinking, domain expertise, and quality control to deliver accurate and actionable results. This part-time remote opportunity is ideal for technical professionals with hands-on experience in web scraping, data extraction and processing. What We Do The Mindrift platform connects specialists with AI projects from major tech innovators. Our mission is to unlock the potential of Generative AI by tapping into real-world expertise from across the globe. This is a freelance role for a Tendem project. As a Senior Python Data Scraping Engineer , you'll handle data scraping tasks requiring technical precision for web extraction and processing, utilizing various tools such as our provided Apify and OpenRouter alongside your own resourceful approaches. Key Responsibilities: Own end-to-end data extraction workflows across complex websites, ensuring complete coverage, accuracy, and reliable delivery of structured datasets. Leverage internal tools (Apify, OpenRouter) alongside custom workflows to accelerate data collection, validation, and task execution while meeting defined requirements. Ensure reliable extraction from dynamic and interactive web sources, adapting approaches as needed to handle JavaScript-rendered content and changing site behavior. Enforce data quality standards through validation checks, cross-source consistency controls, adherence to formatting specifications, and systematic verification prior to delivery. Scale scraping operations for large datasets using efficient batching or parallelization, monitor failures, and maintain stability against minor site structure changes.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>At least 5+ years of relevant experience in data engineering, web scraping, automation, or software development (required).</li><li>Bachelor s or Master s Degree in Engineering, Applied Mathematics, Computer Science, or related technical fields is a plus.</li><li>Candidates should have a strong technical foundation and practical experience with scripting, automation, and AI-assisted workflows.</li><li>We are looking for specialists who can solve non-trivial problems, work confidently with LLMs, and systematically collect, structure, and validate data from diverse sources.</li><li>A methodical, detail-oriented approach and the ability to work independently are essential.</li><li>Strong experience in Python web scraping (BeautifulSoup, Selenium or similar), including dynamic content (JS, AJAX, infinite scroll) and APIs via proxies</li><li>Proven ability to extract data from complex structures (hierarchies, archived pages, inconsistent HTML)</li><li>Solid background in data cleaning, normalization, and validation, delivering structured datasets (CSV, JSON, Google Sheets)</li><li>Demonstrated experience handling anti-bot mechanisms and dynamic site structures at scale</li><li>Experience with cloud infrastructure (AWS or equivalent) and containerization (Docker) as part of real workflows</li><li>Hands-on experience with LLM frameworks (LangChain, OpenRouter, or similar) applied to automation tasks</li><li>Strong attention to detail and commitment to data accuracy</li><li>Self-directed work ethic with ability to troubleshoot independently</li><li>A link to GitHub is a plus</li><li>English proficiency: Upper-intermediate (B2) or above (required)</li></ul>

<p><h4>Job description</h4> <p>The resident engineer will play a crucial role in overseeing and managing construction projects, acting as a liaison between the client and the project team. They will be responsible for implementing effective project management procedures, monitoring performance, and ensuring compliance with contract requirements and client procedures. This role requires strong leadership, organizational, and communication skills, as well as the ability to work under pressure and meet tight deadlines.</p> <p><strong>Key responsibilities:</strong><br> <li>Communicate regularly with client representatives to discuss project progress and address concerns.</li> <li>Propose and implement project management procedures to meet contract and client expectations.</li> <li>Establish and maintain specific procedures for design and construction supervision management.</li> <li>Prepare special reports for the project director/manager, investigating and recommending solutions to service-related issues.</li> <li>Identify priorities, tasks, and organizational structure, providing clear direction to achieve project goals.</li> <li>Define roles and responsibilities for the project management staff.</li> <li>Attend executive and progress meetings, representing the project management team.</li> <li>Monitor performance to ensure successful delivery of key performance indicators and client requirements.</li> <li>Advise the project manager on potential variations in scope of work and their potential impact.</li> <li>Assist the project director in assessing variations and claims, presenting technical assessments to the client.</li> </p> <p><strong>Qualifications and skills:</strong><br> <li>Bachelor's degree in civil engineering, architecture, or construction management, or equivalent.</li> <li>A minimum of 15 years of experience in a construction management role.</li> <li>PMP, CIOB, RICS, or similar certification is highly preferred.</li> <li>Proven track record of delivering projects in dynamic and challenging environments.</li> <li>Proficiency in Microsoft Office applications, particularly Excel and Word.</li> <li>Excellent written and spoken English skills.</li> <li>Ability to work under pressure and meet tight deadlines.</li> <li>Strong communication, organizational, and leadership skills.</li> <li>Knowledge of quality, environmental, safety, and occupational health policies and procedures.</li> <li>Willingness to adapt and learn new skills as required.</li> </p></p><p></p>

<p><h4>Job description</h4> <p>The resident engineer will play a crucial role in overseeing and managing construction projects, acting as a liaison between the client and the project team. They will be responsible for implementing effective project management procedures, monitoring performance, and ensuring compliance with contract requirements and client procedures. This role requires strong leadership, organizational, and communication skills, as well as the ability to work under pressure and meet tight deadlines.</p> <p><strong>Key responsibilities:</strong><br> <li>Communicate regularly with client representatives to discuss project progress and address concerns.</li> <li>Propose and implement project management procedures to meet contract and client expectations.</li> <li>Establish and maintain specific procedures for design and construction supervision management.</li> <li>Prepare special reports for the project director/manager, investigating and recommending solutions to service-related issues.</li> <li>Identify priorities, tasks, and organizational structure, providing clear direction to achieve project goals.</li> <li>Define roles and responsibilities for the project management staff.</li> <li>Attend executive and progress meetings, representing the project management team.</li> <li>Monitor performance to ensure successful delivery of key performance indicators and client requirements.</li> <li>Advise the project manager on potential variations in scope of work and their potential impact.</li> <li>Assist the project director in assessing variations and claims, presenting technical assessments to the client.</li> </p> <p><strong>Qualifications and skills:</strong><br> <li>Bachelor's degree in civil engineering, architecture, or construction management, or equivalent.</li> <li>A minimum of 15 years of experience in a construction management role.</li> <li>PMP, CIOB, RICS, or similar certification is highly preferred.</li> <li>Proven track record of delivering projects in dynamic and challenging environments.</li> <li>Proficiency in Microsoft Office applications, particularly Excel and Word.</li> <li>Excellent written and spoken English skills.</li> <li>Ability to work under pressure and meet tight deadlines.</li> <li>Strong communication, organizational, and leadership skills.</li> <li>Knowledge of quality, environmental, safety, and occupational health policies and procedures.</li> <li>Willingness to adapt and learn new skills as required.</li> </p></p><p></p>