Low Voltage Cable Jointer in Saudi

JOB PURPOSE:<br>To deliver hands-on, multi-disciplinary technical care across all integrated exhibit systems, ensuring safe, reliable, visually impeccable, and continuously available operation for public use.<br>KEY RESPONSIBILITIES & ACCOUNTABILITIES:<br>Asset Care & Maintenance Execution:Perform scheduled preventive maintenance on all assigned exhibit systems in accordance with CMMS schedules, approved SOPs, and OEM manuals. Perform daily exhibit readiness and condition inspections before public opening Execute corrective maintenance and repairs to restore exhibit functionality Perform functional testing, calibration, and verification after maintenance or resets Diagnose faults across integrated exhibit systems (mechanical, electrical, AV, control, and digital, etc.) Identify early signs of wear, degradation, or abnormal behavior and report them for corrective action Replace consumables, wear parts, and minor components before failure occurs Support reliability improvement by properly reporting repeat faults and abnormal trends<br>Vendor & System Support:Support specialist vendors during servicing, testing, and upgrades Verify exhibit functionality before and after vendor intervention Protect warranties by ensuring correct operating and maintenance practices<br>CMMS & Documentation:Ensure work orders are closed by recording all work performed in the CMMS, including findings, actions, time, and parts used.<br>Aesthetics & Visitor Experience:Maintain exhibit aesthetic integrity after every maintenance activity. Ensure panels, covers, screens, cables, and surfaces are clean, aligned, and visually acceptable.<br>Safety & Observation:Follow all safety, electrical, water, and public-protection procedures. Proactively identify and report emerging hazards caused by visitor behavior or misuse.<br><br>QUALIFICATIONS, EXPERIENCE & SKILLS:<br>Bachelor’s degree in maintenance or any related field. OR Associate Diploma in the maintenance field or any related field. Prior hands-on technician experience is preferred; exceptional fresh graduates with high potential may also be considered.

<p>Operate mobile cranes following OEM guidelines and lifting plans. Perform pre-operation checks on brakes, cables, safety systems, and hydraulic components. Ensure proper setup and load balance before each lift. Report mechanical faults or unsafe conditions to the maintenance team immediately. Maintain daily logs and operation records as per site requirements. Follow site supervisor instructions and comply with safety and environmental policies. Support team operations to ensure efficient and accident-free lifting activities.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum 3+ years of experience operating LTM1050 (50-ton) mobile cranes. Age: 40 years and below. GCC experience preferred with valid/unexpired operator license. Knowledge of crane load charts, rigging procedures, and lifting safety standards. Basic to intermediate English communication skills. Medically fit for heavy equipment operation. Saudi Aramco Certification Allowance: 300 SAR after passing certification.</p>

JOB PURPOSE:To support and execute project Electrical commissioning activities assigned. To implement ACWA Power Commissioning Standards and best practices on site for Electrical systems. To ensure Electrical commissioning, testing, and handover processes are carried out thoroughly and in compliance with project requirements. To collaborate with EPC, Project Company, and NOMAC teams to ensure safe, reliable, and efficient commissioning, and to demonstrate full operational readiness of assigned Electrical systems in accordance with OTS.<br>Assist in reviewing EPC Contractor’s Electrical commissioning procedures and test plans. Participate in pre-commissioning and commissioning activities of Electrical systems, including switchgear, transformers, protection systems, cables, UPS, battery chargers, and auxiliary systems. Execute functional testing, loop checks, and troubleshooting under the guidance of the Senior Electrical Commissioning Manager. Perform inspections and pre-commissioning checks to ensure compliance with design specifications and codes. Record test results and prepare commissioning reports for acceptance. Coordinate with design, construction, I&C, mechanical, and DCS teams to resolve technical issues. Liaise with vendors and manufacturers during testing and troubleshooting. Support documentation reviews (test reports, as-built drawings, commissioning records). Ensure compliance with project specifications, industry standards, and safety regulations. Implement safety measures during electrical energization, testing, and commissioning activities. Participate in safety audits and risk assessments. Work closely with Senior Electrical Commissioning Manager and commissioning team members. Share knowledge and collaborate with peers across commissioning disciplines. Support junior engineers and technicians in day-to-day commissioning tasks as delegated.<br>Minimum Qualifications Bachelor’s Degree Electrical Engineering or related discipline.<br>Minimum years of Experience5–7 years of experience in the Power and/or Water industry with a minimum of 5 years in Electrical commissioning roles on large projects. EPC-side commissioning or OEM testing experience is preferred. Minimum Skills Contribute to lessons learned by capturing challenges and solutions from ongoing projects. Support project teams in implementing corrective measures and enhancements in Electrical commissioning. Provide inputs to performance evaluations of EPC/vendor commissioning activities.

<ul><li><p>Install, maintain, and troubleshoot airfield ground lighting systems including runway lights,</p></li></ul><p>taxiway lights, approach lighting, and associated control systems.</p><ul><li><p>Conduct routine inspections and preventive maintenance of lighting fixtures, regulators,</p></li></ul><p>cables, connectors, and control equipment.</p><ul><li><p>Diagnose and repair faults in lighting circuits, control panels, and related electrical systems</p></li></ul><p>to ensure minimal operational disruption.</p><ul><li><p>Monitor system performance and promptly report irregularities or failures affecting airfield</p></li></ul><p>lighting operations.</p><ul><li><p>Assist in testing, calibration, and commissioning of newly installed or upgraded lighting</p></li></ul><p>systems.</p><ul><li><p>Coordinate with engineering teams and supervisors during maintenance activities and</p></li></ul><p>scheduled shutdowns.</p><ul><li><p>Maintain accurate records of maintenance activities, system faults, inspections, and repairs.</p></li><li><p>Ensure proper handling and maintenance of tools, spare parts, and testing equipment.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Diploma or technical certification in Electrical Engineering, Electronics Engineering, or a</p></li></ul><ul><li><p>Minimum 2 years of experience in electrical maintenance, lighting systems, or airfield ground</p></li></ul><p>lighting systems within large infrastructure or aviation environments.</p>

About the Company Majd Yanbu Industrial Company is a joint venture between Elsewedy Cables and Alfanar, building a state-of-the-art copper rod manufacturing facility (130,000 MT/year) in Yanbu Industrial City, with commercial production launching in 2026.<br>About the Role We are hiring a Senior Treasury Accountant to own the company's daily cash and banking operations as we scale toward full production. This is a ground-floor opportunity to build the treasury function of a greenfield industrial company from day one.<br>Key Responsibilities Manage daily cash positions across SAR/USD accounts and prepare rolling cash flow forecasts Execute and process payments on corporate banking platforms (HSBCnet, SNB, FAB) with full segregation of duties Manage bank account opening, mandates, signatory authority matrices, and KYC documentation end-to-end Execute, confirm, and settle FX conversion contracts (spot/forward) and maintain deal registers Manage Copper hedging contracts. Invest surplus cash in time deposits and track maturities, rollovers, and returns Prepare monthly bank reconciliations and treasury journal entries in ERPManage trade finance operations: issuance and amendment of letters of credit (LCs), letters of guarantee (LGs), and documentary collections, including reviewing terms, tracking margins and commissions, and coordinating document presentation with banks and suppliers Administer working capital facilities and term loan utilizations; monitor covenants and reporting deadlines Support external audit, IFRS reporting (IAS 7, IAS 21, IFRS 9), and internal controls<br>Requirements Bachelor's degree in Accounting or Finance (SOCPA, CMA, ACCA, or CTP is a plus)4–10 years of experience in corporate treasury and/or accounting within an industrial, manufacturing, or trading company Hands-on experience with Saudi corporate banking platforms and bank account/mandate management Practical ERP experience in bank reconciliations and treasury entries Working knowledge of IFRS relevant to treasury Fluent Arabic and English

Company Description Nadeen Events is a team of passionate event planners based in Al Khobar. We specialize in creating unforgettable experiences for a variety of events, from corporate events to weddings and parties. Our expertise lies in organizing and executing all kinds of events with creativity and precision. Role Description As a Lighting Technician at Nadeen Events, you will be responsible for the setup, operation, and maintenance of lighting equipment for a variety of events, including weddings, corporate events, and parties. You will work closely with the event planner and lighting designer to ensure that the lighting design is executed flawlessly. Responsibilities Set up and dismantle lighting equipment, including lights, cables, and controllers. Operate lighting equipment to create the desired lighting effects. Maintain inventory of lighting equipment. Qualifications Experience in lighting design and operation. Knowledge of DMX and other lighting control systems. Ability to work independently and as part of a team. Ability to work flexible hours, including evenings and weekends. Skills Lighting control Lighting Rigging Electrical wiring Theatrical production Audio engineering

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> We are looking for a talented and skilled Electrical Technician in Ferro Silicon Plant to join our multicultural and diverse team in Kuwait. You will be responsible to perform preventive, corrective and breakdown maintenance on electrical equipment and systems to ensure safe, reliable and efficient operation of the plant. Support electrical installation, testing and maintenance activities while comply with HSE requirements.<br><ul><li><span>Perform preventive, predictive, and corrective maintenance on electrical equipment and systems. Inspect, diagnose, troubleshooting, repair, and replace faulty electrical components including motors, MCCs, transformers, switchgear, cables, lighting systems, and other plant electrical equipment to ensure equipment reliability and minimize downtime.</span></li><li><span><span>Support the installation, inspection, testing, energization, and commissioning of electrical equipment and systems. Verify equipment readiness and work closely with the Project, Operations, and Engineering teams.</span>&nbsp;</span></li><li><span><span>Conduct routine inspections and testing of electrical equipment to identify abnormalities and recommend corrective actions. Complete maintenance work orders, inspection reports, equipment history records, and maintenance documentation accurately while supporting continuous improvement initiatives to enhance equipment reliability and performance.</span>&nbsp;</span></li><li><span>Support RCA investigations, inspect critical electrical spare parts, and maintain accurate SAP records to ensure equipment reliability and operational readiness.</span> </li><li><span><span>Perform all electrical maintenance activities in accordance with company HSE policies, electrical safety standards, and isolation procedures. Maintain good housekeeping and work closely with Operations, Mechanical, and Project teams to ensure maintenance activities are carried out safely and efficiently.</span></span></li></ul>Required Qualifications:<br><ul><li>Vocational/Technical Certificate or Diploma in Electrical Engineering, Electrical Maintenance, Industrial Electrical Systems, Electronics, Instrumentation, or related discipline.</li></ul>Preferred Qualifications:<br><ul><li>Vocational/Technical Certificate: Minimum 5 years of electrical maintenance experience in ferro silicon, steel industry, or heavy industry operations.</li><li>Diploma: Minimum 3 years of electrical maintenance experience in ferro silicon, steel industry, or heavy<br>industry operations.</li></ul>Relevant experience may include:<br><ul><li>Experience in maintenance, inspection, and troubleshooting of motors, transformers, switchgear, MCCs, power distribution systems, and other industrial electrical equipment.</li><li>Prior experience in ferroalloy plants, steel plants, smelters, power plants, or similar continuous process industries.</li><li>Exposure to preventive, corrective, and breakdown maintenance in high-temperature industrial environments.</li></ul>Job-Specific Skills:<br><ul><li>Ability to perform preventive, corrective, and breakdown maintenance of electrical equipment and systems.</li><li>Ability to inspect, test, troubleshoot, and repair electrical equipment including motors, MCCs, transformers, switchgear, cables, and associated control systems.</li><li>Ability to support installation, commissioning, testing, and energization of electrical equipment and systems.</li><li>Ability to identify electrical abnormalities, analyze faults, and recommend corrective actions to improve equipment reliability.</li><li>Ability to maintain accurate maintenance records, inspection reports, work orders, and equipment history documentation.</li><li>Ability to use electrical testing instruments and tools safely and effectively.</li><li>Ability to support maintenance activities during breakdowns, shutdowns, and project execution activities.</li><li>Strong adherence to Safety Standards, SOPs, Lockout/Tagout (LOTO), electrical isolation procedures, and emergency procedures.</li><li>Strong coordination, communication, troubleshooting, and reporting skills.</li></ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

SGS is the world’s leading Testing, Inspection and Certification company. We operate a network of over 2,500 laboratories and business facilities across 115 countries, supported by a team of 99,500 dedicated professionals. With over 145 years of service excellence, we combine the precision and accuracy that define Swiss companies to help organizations achieve the highest standards of quality, compliance, and sustainability.<br><br><br><br>Job Description<br><br>Support engineers in reviewing and developing quality documents, procedures, and checklists. Develop, implement, and review quality inspection procedures and quality-related documentation across the asset lifecycle, including design review, FAT, SAT, installation, commissioning, operation, maintenance, and decommissioning. Perform Quality Assurance (QA) and Quality Control (QC) inspections for telecommunication equipment within Power Generation and Transmission & Distribution networks up to 380k V. Ensure compliance with Saudi Standards and Specifications, international standards, and industry best practices. Conduct quality audits, compliance evaluations, gap analyses, and quality verification activities. Provide technical inspection expertise for telecommunication systems including FO/OPGW, Pilot Cables, SDH/PDH, MPLS, microwave systems, tele-protection systems, SCADA/SAS communication interfaces, SCADA, SAS, and RTUs. Apply quality and inspection management strategies across supplier qualification, EPC projects, testing and commissioning, and maintenance activities. Review telecom equipment drawings, technical specifications, and OEM manuals. Prepare, review, and maintain technical documentation, inspection reports, and quality records. Develop and review Inspection and Test Plans (ITPs), Method Statements, Quality Procedures, Checklists, and Work Instructions. Perform Root Cause Analysis and manage Non-Conformance Reports (NCRs). Conduct or support Type Testing, FAT, SAT, and commissioning activities for telecommunication equipment. Provide expertise in diagnostic assessments and condition monitoring of telecom equipment. Ensure compliance with safety and regulatory requirements for telecommunication equipment up to 380k V. Support preventive and corrective maintenance activities for telecommunication equipment. Apply knowledge of SCADA, SAS, field communication protocols, telecommunication standards, calibration procedures, and safety requirements. <br><br>Qualifications<br><br>Bachelor's Degree in Telecommunication Engineering or a relevant Engineering discipline. Saudi Council of Engineers Membership is highly preferable. Minimum 15-20 years of experience, including at least 5 years in the Middle East, performing Quality Inspection functions in Power Generation and Transmission & Distribution networks up to 380k V. Preferred experience with SE, GCC utilities, or equivalent operators in QA/QC inspection activities. Demonstrated knowledge of Saudi Standards and Specifications, as well as international standards and best practices. Proven experience in developing, implementing, and reviewing quality inspection procedures and quality-related documentation across all phases of the asset lifecycle. Fully qualified and experienced in Quality Assurance (QA) and Quality Control (QC) inspections, including inspection methodologies, quality verification processes, quality audits, compliance evaluation, and gap analysis. Strong working knowledge of ISO 9001 Quality Management Systems and ISO 55001 Asset Management. Thorough knowledge of international standards applicable to Power Generation and Transmission & Distribution telecommunication equipment up to 380k V. Familiarity with SE and GCC transmission standards related to materials, engineering, construction, commissioning, and maintenance. Strong background in quality management and technical documentation. Experience preparing, reviewing, and maintaining technical documentation, inspection reports, and quality records. Knowledge of Inspection and Test Plans (ITPs), Method Statements, Quality Procedures, Checklists, and Work Instructions. Expertise in Type Testing, FAT, SAT, commissioning, diagnostic assessment, and condition monitoring of telecommunication equipment. Professional proficiency in English, both written and spoken. Arabic language proficiency is an advantage but not mandatory.

<p>The incumbent will be responsible for the maintenance, troubleshooting, and smooth operation of electrical systems and equipment to ensure uninterrupted production and equipment reliability.</p><p>Key Responsibilities</p><ul><li>Carry out preventive, predictive, and breakdown maintenance of CCM electrical equipment.</li><li>Troubleshoot electrical faults in motors, drives, PLC-controlled systems, sensors, encoders, and field instruments.</li><li>Maintain and repair electrical panels, MCCs, VFDs, soft starters, transformers, and switchgear.</li><li>Ensure smooth operation of CCM equipment such as mould oscillation systems, withdrawal &amp; straightening units, tundish car, ladle turret, and cooling systems.</li><li>Attend electrical breakdowns promptly to minimize production downtime.</li><li>Perform routine inspection of cables, motors, limit switches, proximity sensors, and control circuits.</li><li>Execute maintenance activities as per planned maintenance schedules.</li><li>Coordinate with mechanical, automation, and production teams during shutdowns and maintenance activities.</li><li>Ensure compliance with electrical safety standards, LOTO procedures, and PPE requirements.</li><li>Maintain maintenance records and report equipment abnormalities to the supervisor.</li></ul><p>Required Skills</p><ul><li>Strong knowledge of industrial electrical maintenance in a steel plant.</li><li>Hands-on experience with PLC-based control systems (Siemens/ABB/Allen-Bradley preferred).</li><li>Knowledge of AC/DC motors, VFDs, MCCs, HT/LT electrical systems, and control panels.</li><li>Ability to read electrical drawings and troubleshoot electrical circuits.</li><li>Familiarity with electrical measuring instruments such as multimeters, clamp meters, insulation testers (Megger), etc.</li><li>Understanding of preventive and predictive maintenance practices.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Qualification:</strong> ITI</p><p><strong>Experience:</strong> 6</p><p><strong>Place of Posting -</strong> Saudi Arab</p><p><strong>Preferred Experience</strong></p><p>Minimum 6 years of experience in electrical maintenance of Continuous Casting Machine (CCM) in an integrated steel plant or Steel Melting Shop.</p><p>Experience in handling breakdown maintenance and shutdown activities in a high-temperature manufacturing environment.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong><span><span>To manage sub-contractor/departmental resources to achieve the desired productivity in tower erection and related activities to the satisfaction of the client</span><br></span></strong></p><br><ul><li><strong><span>Tower Assembly &amp; Rigging:</span></strong><span>&nbsp;Construct steel tower sections at heights using manual hoists, winches, and cranes.</span></li><li><strong><span>Structural Alignment:</span></strong><span>&nbsp;Ensure vertical alignment, precise bolting, and correct torque tightening of tower members as per SEC specifications.</span></li><li><strong><span>Stringing Support:</span></strong><span>&nbsp;Assist the stringing crew with conductor pulling, tensioning, and sagging using pullers and tensioners</span></li><li><strong><span>Safety Knowledge:</span></strong><span>&nbsp;Strict adherence to SEC HSE requirements, including the use of full-body harnesses, fall protection equipment, and compliance with ISMS safety regulations.</span></li><li><strong><span>Communication:</span></strong><span>&nbsp;Ability to read/interpret structural drawings.</span></li><li><strong><span>Physical &amp; Medical:</span></strong><span>&nbsp;Must be physically fit, able to work at heights, and possess a valid medical fitness certificate.</span></li></ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 1+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

???? Systems Engineer⏳ 12-month initial contract - with extensions???? Riyadh????️ Arabic speakers required<br>We are looking for an IT Systems Engineer – Technical Support to join a technical infrastructure environment supporting critical server, GPU, storage, networking and liquid-cooling systems. This is a highly hands-on role where you will take ownership of technical incidents from initial diagnosis through to resolution, working both remotely and onsite. You will be responsible for maintaining infrastructure, troubleshooting hardware and system issues, carrying out preventive maintenance, and working directly with customer technical teams to ensure systems remain operational and SLA requirements are met.<br>What You'll Be Doing Technical Support & Incident Management Provide 1st and 2nd level technical support across server, storage and network environments. Take ownership of assigned incidents and tickets through to resolution. Classify, investigate and analyse technical incidents. Troubleshoot issues remotely and onsite in line with agreed SLAs. Produce detailed technical analysis and incident reports. Identify potential escalations early and take proactive steps to prevent further impact. Hardware & Infrastructure Maintenance Perform hardware replacements and physical fault isolation. Carry out system health checks and operational readiness testing. Troubleshoot server, GPU, storage and networking hardware. Reseat and replace network cables and other physical components where required. Perform root cause analysis on hardware failures. Carry out firmware and BIOS updates. Support annual liquid-cooling maintenance activities. Conduct regular preventive maintenance and infrastructure health checks. Warranty & Documentation Manage and track RMA (Return Material Authorization) cases with hardware manufacturers. Maintain accurate records of all troubleshooting and maintenance activities within the ticketing system. Prepare technical and service-related documentation. Prepare, refurbish and test spare parts to ensure they are ready for deployment. On-Call & Onsite Support Participate in technical on-call rotations. Provide permanent onsite technical support when required. Respond quickly and effectively to critical infrastructure incidents. Customer Support Communicate independently and professionally with customer technical contacts. Provide clear updates throughout the incident lifecycle. Build strong working relationships with customer technical teams. Maintain a high standard of service quality and customer satisfaction.<br>What We're Looking For Experience & Qualifications Completed apprenticeship, vocational training or equivalent qualification in IT Systems Engineering, Systems Administration, IT Infrastructure or a related discipline.2–3+ years of professional experience working with server, storage and network infrastructure. Hands-on experience troubleshooting and maintaining enterprise hardware. Comfortable working from technical manuals, service documentation and manufacturer specifications. Technical Skills Strong understanding of IT infrastructure and hardware. Ability to independently diagnose and troubleshoot technical issues. Good knowledge of server, storage and networking environments. Experience with hardware maintenance and component replacement. Knowledge of firmware and BIOS updates. Understanding of preventive maintenance and system health checks. Strong documentation and ticket-management skills. Good working knowledge of Microsoft Office – particularly Word, Excel and Outlook.<br>The Ideal Candidate We're looking for someone who is hands-on, technically curious and comfortable working directly with physical infrastructure. You should be able to work independently, remain calm when dealing with critical incidents and communicate confidently with both technical teams and customers.

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركه الشبكات الرقميه للاتصالات عن <strong >فني شبكات اتصالات</strong> للانضمام إلى فريقها في المنطقة الشرقية. يهدف هذا الدور بدوام كامل إلى دعم عمليات الشبكات وضمان استمرارية خدمات الاتصالات، ويتطلب خبرة تتراوح بين 0-1 سنة.</p> <h3 >المهام الرئيسية</h3> <p >يتولى فني شبكات الاتصالات مسؤولية تنفيذ مهام التمديد والتوصيل والصيانة لضمان الأداء الفعال لشبكات الاتصالات. يشمل ذلك تركيب المعدات والأسلاك داخل المباني وخارجها، ومتابعة المشكلات الفنية وحلها تحت إشراف مباشر، بالإضافة إلى إعداد التقارير اللازمة.</p> <h3 >المسؤوليات الأساسية</h3> <ul > <li >تمديد الأسلاك وتوصيل المعدات اللازمة لتشغيل الشبكات.</li> <li >ضمان تشغيل خدمات الهواتف والإنترنت بشكل مستمر وفعال.</li> <li >توصيل كافة الأسلاك في المباني وخارجها وفقاً للمعايير الفنية.</li> <li >إعداد التقارير الفنية وتقديمها للمسؤول المباشر.</li> <li >فهم أنظمة الاتصالات بما في ذلك الإرسال والبث والتبديل والتحكم.</li> <li >متابعة مشاكل الشبكة والعمل على حلها تحت إشراف مهندس الشبكة.</li> <li >إجراء الصيانة الروتينية للمعدات والأدوات، وتحديد نوع الصيانة المطلوبة وتوقيتها.</li> <li >اختبار المعدات التي تم إصلاحها أو تثبيتها حديثًا أو تحديثها للتأكد من مطابقتها للمواصفات وعملها بشكل صحيح.</li> <li >اختبار الدوائر ومكونات معدات الاتصالات السلكية واللاسلكية المعطلة لتحديد مصادر الأعطال وإصلاحها.</li> </ul> <h3 >المؤهلات والخبرات</h3> <ul > <li >خبرة عملية تتراوح بين <strong >0 إلى 1 سنة</strong> في مجال شبكات الاتصالات أو ما يعادله.</li> <li >القدرة على العمل بفعالية ضمن فريق وتحت الإشراف.</li> <li >مهارات جيدة في حل المشكلات الفنية.</li> </ul> <h3 >بيئة العمل</h3> <p >يعمل فني شبكات الاتصالات بدوام كامل في المنطقة الشرقية بالمملكة العربية السعودية. تقدم شركه الشبكات الرقميه للاتصالات راتباً شهرياً يتراوح بين <strong >5000 و 6000 ريال سعودي</strong> لهذا الدور.</p> <h3 >التقديم للوظيفة</h3> <p >ندعو المهتمين والذين يستوفون المتطلبات المذكورة أعلاه للتقديم على هذه الفرصة ضمن فريق شركه الشبكات الرقميه للاتصالات.</p></div>

About Veolia<br><br>Veolia aims to be the benchmark company for ecological transformation. Our mission to “Resource the world” demonstrates the unwavering commitment of our 220,000 employees to creating a positive impact for our planet.<br><br>By joining Veolia Water Technologies, not only will you become a Resourcer, but you will also take part in providing complete solutions for water treatment. By innovating in key areas such as sustainable development, resource and product recovery, we want to offer water related solutions suited for every application. <br><br>At Veolia Water Technologies, Saudi Arabia, we are committed to empowering our employees, to make their own decisions and to make a real difference.<br><br>Become a player in ecological transformation by joining us! ????????<br><br><br><br>Job Description<br><br>Main tasks and responsibilities include but are not limited to the following:<br><br>Operate chemical systems and prepare chemicals according to approved procedures. Carry out installation and maintenance work under the supervision of the maintenance supervisor or engineer. Anticipate and use initiative to identify and resolve problems, assist engineers and fellow technicians in matters related to his area of expertise. Master water analysis tests and provide input during the initial survey, commissioning stage, and ongoing customer service in compliance with the Application Quality Plan. Clean containers and monitor chemical dosing systems regularly. Ensure proper usage of equipment and materials, take positive action to minimize waste and protect equipment from excessive wear or damage. Provide a comprehensive report on all work done, including a record of time spent, materials used, and other items required for invoicing. Perform any other duties related to his area of expertise as directed by the Chemical Director. <br><br><br><br>Qualifications<br><br>Qualifications: Technical Diploma in Chemistry<br><br>Experience: 0 - 1 year of experience<br><br><br><br>Additional Information<br><br>QHSE Commitments: <br><br> Implementing the QHSE policies and ISO Procedures. Follow the always safe rules and coach your colleagues on the same Follow the road traffic rules while driving to and from home to work (fasten seat belt, maintain speed limits, never use mobile / eat/drink/smoke while driving, drive in a fit condition). Being responsible towards Veolia’s specific sustainable development commitments. Ensure to read the safety moments / Alerts / other information shared by the HSE Team. Before visiting any site, factory, and/or warehouse, make sure to inform the safety team to get the right induction and prepare LMRA and the needed PPE. Always maintain office safety such as keeping your files/papers in the correct place, keeping the drawers closed after use, arranging the electrical cables secured to avoid slips & trips, reporting any lost connections or damaged electrical components, and ensuring your office is clean and tidy Report to HR/HSE if you are facing stress, fatigue, any form of harassment, or bullying at the workplace. Veolia Code of Conduct<br><br> Comply with applicable ethics and legislation referred to in Veolia Code of Conduct policy, particularly in the fight against corruption and influence peddling. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

About Veolia<br><br>Veolia aims to be the benchmark company for ecological transformation. Our mission to “Resource the world” demonstrates the unwavering commitment of our 220,000 employees to creating a positive impact for our planet.<br><br>By joining Veolia Water Technologies, not only will you become a Resourcer, but you will also take part in providing complete solutions for water treatment. By innovating in key areas such as sustainable development, resource and product recovery, we want to offer water related solutions suited for every application. <br><br>At Veolia Water Technologies, Saudi Arabia, we are committed to empowering our employees, to make their own decisions and to make a real difference.<br><br>Become a player in ecological transformation by joining us! ????????<br><br><br><br>Job Description<br><br>Main tasks and responsibilities include but are not limited to the following:<br><br>Conduct quality control tests on raw materials, in-process, and finished products using various analytical techniques to ensure compliance with standards. Generate and communicate accurate QC reports, monitor data trends, and identify potential issues in manufacturing processes. Maintain and calibrate lab equipment, and prepare chemical solutions for testing and calibration. Develop, optimize, and validate QC methods and procedures for improved efficiency and new products. Investigate quality deviations, implement corrective actions, and support continuous improvement initiatives. Manage lab inventory, ensure proper storage of chemicals, and handle laboratory waste in compliance with regulations. Adhere to QHSE requirements and maintain documentation for audits and regulatory compliance. Collaborate with cross-functional teams to address quality issues and implement solutions. Stay current with industry standards and best practices in quality control and analytical chemistry. Perform other quality control and laboratory duties as assigned by management. <br><br><br><br>Qualifications<br><br>Bachelor of Chemistry<br><br>Experience: 0 - 2 years of experience<br><br><br><br>Additional Information<br><br>Additional information<br><br>QHSE Commitments: <br><br> Implementing the QHSE policies and ISO Procedures. Follow the always safe rules and coach your colleagues on the same Follow the road traffic rules while driving to and from home to work (fasten seat belt, maintain speed limits, never use mobile / eat/drink/smoke while driving, drive in a fit condition). Being responsible towards Veolia’s specific sustainable development commitments. Ensure to read the safety moments / Alerts / other information shared by the HSE Team. Before visiting any site, factory, and/or warehouse, make sure to inform the safety team to get the right induction and prepare LMRA and the needed PPE. Always maintain office safety such as keeping your files/papers in the correct place, keeping the drawers closed after use, arranging the electrical cables secured to avoid slips & trips, reporting any lost connections or damaged electrical components, and ensuring your office is clean and tidy Report to HR/HSE if you are facing stress, fatigue, any form of harassment, or bullying at the workplace. Veolia Code of Conduct<br><br> Comply with applicable ethics and legislation referred to in Veolia Code of Conduct policy, particularly in the fight against corruption and influence peddling. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.<br><br>As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

Company Description Majd Yanbu Industrial Company is a Saudi limited liability company established as a strategic 50/50 joint venture between Elsewedy Cables and Alfanar Electrical Systems. Based in Yanbu Industrial City, the company specializes in manufacturing high-purity copper rods to serve industrial and infrastructure needs across Saudi Arabia and the wider GCC region.<br>Job Purpose Responsible for managing and coordinating employee and labor accommodation and related support services, ensuring that accommodation facilities are safe, clean, properly equipped, and maintained in accordance with company standards and operational requirements.<br>Key Responsibilities Manage labor accommodation operations, including room allocation, check-in and check-out procedures, occupancy monitoring, and accommodation records. Ensure the availability, proper condition, and maintenance of accommodation facilities, furniture, equipment, and essential supplies. Coordinate and monitor daily catering and meal services based on the number and requirements of employees and labor residing in the accommodation. Supervise company cleaning staff, including task allocation, work schedules, attendance, performance, and cleanliness standards. Coordinate and follow up on maintenance works, repairs, and facility-related issues until completion and resolution. Monitor accommodation-related supplies, services, and costs to ensure efficient utilization of company resources. Maintain accurate records and prepare periodic reports related to accommodation, occupancy, cleaning, and catering services. Address accommodation-related requests, concerns, and issues, ensuring timely resolution in coordination with the relevant departments.<br>Qualifications & Experience Bachelor’s degree or Diploma in Business Administration or any related field.2–4 years of relevant experience in facilities management, industrial labor accommodation, residential compound management, or support services. Strong organizational, communication, coordination, and problem-solving skills. Proficiency in Microsoft Office. Good command of the English language. Ability to work in an industrial and operational environment that requires field supervision, coordination, and multitasking.

<p>POSITION SUMMARY Follow all company policies and procedures; protect company assets. Address guests service needs. Exchange information with other employees using electronic devices. Develop and maintain positive working relationships with others. Communicate with other IS personnel to troubleshoot and resolve technical problems or issues related to computer software and systems, internet access, hardware and peripheral equipment. Refer major problems or defective products to vendors/technicians. Respond to program error messages by finding and correcting problems or terminating the program. Enter commands and activate controls on computer and peripheral equipment. Inspect, test, and diagnose computer equipment and systems. Maintain inventory of all technology devices. Maintain computer networks, support server system(s), and supporting software. Provide network communications support. Maintain and upgrade hardware, software and website technical architecture related to hardware and telecommunication connectivity. Perform system backups. Provide end-user support. Manage user accounts, including set up, removal, and resetting passwords in order to ensure confidentiality and proper use. Install, configure, and modify workstations. Modify workstations, including set up of cables, desktop computers, laptops, docking stations, and printers. Read technical manuals, confer with users, or conduct computer diagnostics to investigate and resolve problems or to provide technical assistance and support. Secure all backup tapes and computer/telephone rooms. Educate users regarding procedures for securing Personal Identifiable Information (PII). Move, lift, carry, push, pull, and place objects weighing less than or equal to 10 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: High school diploma or G.E.D. equivalent. Related Work Experience: At least 1 year of related work experience. Supervisory Experience: No supervisory experience. License or Certification: None</p>

Position Summary The Data Center Hardware & Equipment Specialist at KAUST's flagship supercomputer facility plays a crucial role in ensuring the physical infrastructure's security and operational continuity. This position oversees the installation, configuration, and maintenance of servers, including GPUs, within the CRAY supercomputer environment and other hosted equipment. This position ensures compliance with hardware tracking processes and updates the asset register, collaborating with various teams to meet procurement and regulatory requirements while maintaining high standards of security and operational efficiency.<br>Working within the Scientific Computing Center (SCC) data center and other Data Centers, hosting HPCs, including Shaheen III, the Data Center Hardware & Equipment Specialist manages data center hardware and equipment, ensuring that all components are properly installed and configured to support operations. The Specialist maintains detailed records of hardware assets, tracks equipment status, and ensures compliance with established protocols. This role is essential to maintaining the integrity and performance of the HPE/CRAY supercomputer's infrastructure.<br>Job Description Major Responsibilities:Oversee the installation, configuration, and maintenance of servers, including GPUsEnsure compliance with hardware tracking processes and update the asset register Perform regular inspections and maintenance of data center hardware Monitor physical conditions of servers and other IT infrastructure Manage network cables, server hardware and other equipment Collaborate with vendors to proactively manage backup part inventory to ensure uptime Work with compliance officers to ensure accurate accounting of controlled equipment Follow data center access protocols to ensure the security of the system and prevent unauthorized removal of parts Respond to alarms and incidents, providing immediate resolution Collaborate with procurement teams to acquire necessary equipment Ensure adherence to export control regulations and NIST SP 800-53 standards. Maintain detailed records of hardware assets and track equipment status Oversee/perform complex software/hardware troubleshooting, patches, and re-installations Manage infrastructure capacity and performance, verifying application logs and monitoring activity<br>Personal Requirements:<br>Competencies Demonstrates expertise in managing and maintaining HPE/CRAY supercomputer hardware infrastructure, including servers, storage systems, and networking equipment Shows proficiency in handling GPUs and optimizing the infrastructure performance within the supercomputer environment Exhibits strong understanding of HPC systems and architectures Communicates effectively with stakeholders Uses monitoring tools to optimize supercomputer infrastructure performance Demonstrates analytical skills to troubleshoot and resolve hardware issues Shows flexibility to adapt to new technologies and changing business needs Ensures compliance with hardware tracking processes Collaborates across teams to achieve goals Ability to manage logistics of heavy equipment and work in confined spaces<br>Experience Detailed knowledge of HPE/CRAY supercomputer hardware infrastructure and NVIDIA supercomputer GPUs, including installation, maintenance, and troubleshooting of the supporting infrastructure Experience working in data centers, managing large-scale hardware deployments, and ensuring uptime and reliability Proven track record in overseeing the installation, configuration, and maintenance of servers and data center equipment Familiarity with hardware tracking processes and asset register management<br><br>Qualifications Bachelor’s degree in Computer Science, Information Technology, Electrical Engineering, Electronics Engineering or related field Relevant certifications preferred (e.g., CDCTP, DCCA, CCNP Data Center, RCDD) Minimum of 7 years of experience in managing HPC hardware and data center equipment/infrastructure Knowledge of data center infrastructure and operations Understanding of IT asset management for controlled equipment

IT Support & Venue Technology Specialist Location: Riyadh, Saudi Arabia Contract: 7-Month Fixed-Term Contract Duration: 15 August 2026 – 28 February 2027Work Location: Primarily stadium-based<br>About the Role We are hiring an experienced IT Support & Venue Technology Specialist to provide technical support across stadiums and tournament-related venues in Riyadh. This is a 7-month contract role supporting venue preparation, technology testing, rehearsals and live football tournament operations. The successful candidate will combine IT help desk support, venue technology coordination, troubleshooting and IT asset management. The role requires flexibility to work evenings, weekends and extended hours during matchdays and other critical operational periods.<br>Key Responsibilities Provide first- and second-line IT support to venue teams, employees, contractors and operational stakeholders. Install, configure and troubleshoot laptops, desktops, printers, scanners, mobile devices and other IT equipment. Resolve hardware, software, Microsoft 365, email, user-access, network, Wi-Fi and connectivity issues. Log, prioritise and track incidents through the designated IT help desk or ticketing system. Set up and test IT equipment across stadium offices, accreditation areas, workforce centres, meeting rooms, control rooms and other operational spaces. Conduct venue technology checks before rehearsals, matchdays and live tournament activities. Operate from the venue IT help desk or technology operations centre during live events. Respond immediately to matchday incidents and prioritise issues according to their operational impact. Coordinate with network, telecommunications, audiovisual, access-control and specialist technology teams when required. Maintain live incident logs and provide regular updates until critical issues are resolved. Arrange temporary workarounds, backup equipment and escalation support to minimise operational disruption. Prepare, issue, track and recover IT equipment allocated to venue teams. Maintain accurate IT asset registers, equipment handover records and inventory reports. Ensure spare laptops, chargers, cables, adapters and other essential equipment are available at the venue. Support venue decommissioning and final equipment reconciliation at the end of the project. Follow all IT security, cybersecurity, access-control and data-protection requirements. Prepare daily reports covering incidents, outstanding issues, equipment status and operational risks.<br>Qualifications and Experience Diploma or bachelor’s degree in Information Technology, Computer Science or a related field. Minimum 3 years of experience in IT support, desktop support, IT help desk or venue technology. Previous experience supporting stadiums, football tournaments, sporting events or major live events is strongly preferred. Strong knowledge of Windows operating systems, Microsoft 365 and standard IT equipment. Experience troubleshooting wired networks, Wi-Fi, VPN and general connectivity issues. Familiarity with Active Directory, user-access administration and IT ticketing systems. Experience managing IT assets and equipment inventory. Ability to remain calm and resolve technical issues quickly during live operations. Strong communication, documentation and stakeholder-coordination skills. Good command of English; Arabic would be an advantage. ITIL, Comp TIA or Microsoft certifications would be advantageous. Important Requirements Must be available for the full contract from 15 August 2026 to 28 February 2027. Must be comfortable working primarily from stadiums and tournament venues. Must be flexible to work evenings, weekends, public holidays and extended hours during live tournament periods. Candidates should clearly highlight any stadium, matchday, sporting event or venue technology experience in their CV.

IT Support & Venue Technology Specialist Location: Jeddah, Saudi Arabia Contract: 7-Month Fixed-Term Contract Duration: 15 August 2026 – 28 February 2027Work Location: Primarily stadium-based<br>About the Role We are hiring an experienced IT Support & Venue Technology Specialist to provide technical support across stadiums and tournament-related venues in Jeddah. This is a 7-month contract role supporting venue preparation, technology testing, rehearsals and live football tournament operations. The successful candidate will combine IT help desk support, venue technology coordination, troubleshooting and IT asset management. The role requires flexibility to work evenings, weekends and extended hours during matchdays and other critical operational periods.<br>Key Responsibilities Provide first- and second-line IT support to venue teams, employees, contractors and operational stakeholders. Install, configure and troubleshoot laptops, desktops, printers, scanners, mobile devices and other IT equipment. Resolve hardware, software, Microsoft 365, email, user-access, network, Wi-Fi and connectivity issues. Log, prioritise and track incidents through the designated IT help desk or ticketing system. Set up and test IT equipment across stadium offices, accreditation areas, workforce centres, meeting rooms, control rooms and other operational spaces. Conduct venue technology checks before rehearsals, matchdays and live tournament activities. Operate from the venue IT help desk or technology operations centre during live events. Respond immediately to matchday incidents and prioritise issues according to their operational impact. Coordinate with network, telecommunications, audiovisual, access-control and specialist technology teams when required. Maintain live incident logs and provide regular updates until critical issues are resolved. Arrange temporary workarounds, backup equipment and escalation support to minimise operational disruption. Prepare, issue, track and recover IT equipment allocated to venue teams. Maintain accurate IT asset registers, equipment handover records and inventory reports. Ensure spare laptops, chargers, cables, adapters and other essential equipment are available at the venue. Support venue decommissioning and final equipment reconciliation at the end of the project. Follow all IT security, cybersecurity, access-control and data-protection requirements. Prepare daily reports covering incidents, outstanding issues, equipment status and operational risks. Qualifications and Experience Diploma or bachelor’s degree in Information Technology, Computer Science or a related field. Minimum 3 years of experience in IT support, desktop support, IT help desk or venue technology. Previous experience supporting stadiums, football tournaments, sporting events or major live events is strongly preferred. Strong knowledge of Windows operating systems, Microsoft 365 and standard IT equipment. Experience troubleshooting wired networks, Wi-Fi, VPN and general connectivity issues. Familiarity with Active Directory, user-access administration and IT ticketing systems. Experience managing IT assets and equipment inventory. Ability to remain calm and resolve technical issues quickly during live operations. Strong communication, documentation and stakeholder-coordination skills. Good command of English; Arabic would be an advantage. ITIL, Comp TIA or Microsoft certifications would be advantageous. Important Requirements Must be available for the full contract from 15 August 2026 to 28 February 2027. Must be comfortable working primarily from stadiums and tournament venues in Jeddah. Must be flexible to work evenings, weekends, public holidays and extended hours during live tournament periods. Candidates should clearly highlight any stadium, matchday, sporting event or venue technology experience in their CV.

<h3 >About SGS and the Role</h3> <p >SGS is recognized as the world’s leading testing, inspection, and certification company, setting the global benchmark for quality and integrity. With a network of 2,600 offices and laboratories supported by 93,000 employees, SGS works to enable a better, safer, and more interconnected world. We are currently seeking dedicated <strong >Quality Control Inspectors (QCI) specializing in Electrical &amp; Instrumentation (E&amp;I) for offshore operations</strong> to join our team in Saudi Arabia on a full-time basis.</p> <h3 >Role Overview</h3> <p >The Quality Control Inspector (QCI) E&amp;I Offshore will be responsible for executing professional inspection jobs on materials, equipment, and construction/installation activities within offshore environments. This role ensures strict conformity with quality control plans and approved inspection test plans, contributing to the overall quality and safety standards of projects.</p> <h3 >Key Responsibilities</h3> <ul > <li >Organize and execute inspection jobs with professionalism.</li> <li >Perform specific inspections on materials, equipment, and construction/installation activities directly on site.</li> <li >Issue relevant Quality Records and prepare non-conformance reports for the QC Supervisor when necessary.</li> <li >Verify conformity with the Quality Control Plan and obtain all necessary documentation.</li> <li >Check procedures and equipment designated for tests, controls, and inspections.</li> <li >Manage documentation that certifies tests, controls, and inspections.</li> <li >Ensure the correct implementation of the approved Inspection Test Plan.</li> <li >Verify special processes and the qualifications of workers involved.</li> <li >Conduct visual inspections, dimensional tests, and check ratings and material for connections.</li> </ul> <h3 >Inspection Scope</h3> <p >Inspectors will focus on a range of electrical and instrumentation components and systems, including but not limited to:</p> <ul > <li >Power transformers and switchboards.</li> <li >Accumulator batteries and sockets outlets.</li> <li >Lighting systems.</li> <li >Remote terminal units and various instruments.</li> <li >Cables and tunings.</li> </ul> <h3 >Required Experience</h3> <p >Candidates should possess <strong >5 to 10 years of relevant experience</strong> in quality control inspection, particularly within Electrical &amp; Instrumentation (E&amp;I) and offshore environments.</p> <h3 >Application Process</h3> <p >Interested candidates are invited to apply for this full-time position in Saudi Arabia.</p>