Inspection Engineer Jobs in Saudi

The Civil Engineer Inspector is responsible for planning, executing, documenting, and reporting construction site inspections to ensure full compliance with approved drawings, technical specifications, quality standards, and safety regulations. The role involves close coordination with clients, contractors, and internal stakeholders to maintain construction quality and project integrity.<br>Key Responsibilities<br>1. Pre-Inspection Planning & Preparation<br>Monitor daily schedules and email communications for newly assigned inspection activities Conduct a thorough review of all project documentation, including approved drawings, bar bending schedules, method statements, and inspection stages Prepare Inspection Notification Reports (INR) with complete client, project, and inspection scope details prior to site visits Coordinate with clients at least 24 hours in advance to confirm inspection timing and request required documentation Verify the availability and validity of approved construction drawings and ensure alignment with project specifications<br>2. On-Site Inspection Activities<br>Perform comprehensive physical site inspections in accordance with approved inspection procedures, quality standards, and safety regulations Conduct detailed visual inspections of construction activities and collect clear photographic evidence for all required inspection points Verify compliance of executed works against approved drawings, technical specifications, and applicable codes Identify, document, and classify construction deviations such as:* Structural inconsistencies* Missing or incorrect reinforcement* Improper installation methods* Workmanship and quality defects Communicate identified deviations to clients and contractors during inspections and provide guidance on corrective actions Ensure all photographic records are accurately labelled, catalogued, and stored in designated project folders<br>3. Documentation & Reporting<br>Prepare and issue inspection documentation based on site conditions:* INR reports for compliant works or minor deviations resolved during inspection* Schedule re-inspections for multiple minor non-conformities requiring correction* Issue RD5 reports for major deviations requiring formal documentation and escalation Submit detailed daily inspection reports via App Sheet or approved digital platforms Provide daily inspection status summaries to the Team Leader via email, including outcomes, deviations, and revisit requirements Maintain accurate, traceable, and auditable inspection records for all assigned projects<br>4. Client & Stakeholder Communication<br>Maintain professional, clear, and effective communication with clients, contractors, consultants, and internal teams Provide technical explanations regarding inspection findings, compliance requirements, and corrective measures Coordinate revisit inspections and verify the closure of corrective actions closure Promptly escalate major deviations to the Team Leader for further action and decision-making<br>Qualifications & Minimum Requirements<br>Education Bachelor’s Degree in Civil Engineering Experience Minimum 3 years of experience in civil construction inspection or site supervision Professional Registration Valid registration with the Saudi Council of Engineers (SCE)<br>Technical Knowledge - Strong understanding of:<br>Civil construction methods and materials Quality control and quality assurance processes Structural and concrete works inspection Approved drawings, specifications, and standards<br>Industrial Education & Training<br>Construction inspection methodologies and best practices Quality control and quality assurance systems Construction site health, safety, and environmental protocols Technical reporting and professional documentation standards Continuous professional development in construction technologies, regulations, and codes<br>Authorization to Sign<br>Inspection Notification Reports (INR) Site visit and inspection documentation Photographic evidence logs Daily inspection and activity reports<br>Physical Requirements (Mandatory for Technical Staff)<br>Ability to work in active construction environments, including adverse weather conditions Capability to safely navigate construction sites (climbing, walking on uneven surfaces, and working at heights) Strong visual acuity for detailed inspection and quality assessment Physical endurance for extended field inspections Ability to carry inspection tools and equipment (up to 20 kg)<br>Soft Skills<br>High attention to detail and strong analytical skills Excellent communication and interpersonal abilities Professional client-service mindset Effective problem-solving and decision-making skills Strong time management and organizational capabilities Adaptability to changing site conditions and schedules Integrity, accountability, and commitment to quality standards<br>Language Skills<br>English: Advanced proficiency (written and verbal) Arabic: Proficiency preferred for enhanced communication Strong professional and business communication skills in both languages<br>Other Requirements<br>Valid driving license and reliable transportation Proficiency in digital inspection, documentation, and reporting tools Willingness to work flexible hours and respond to urgent inspection requests Full compliance with health, safety, and PPE requirements

<p>Implement and maintain Quality of the Products, Management systems, review processes, and ensure continual quality improvements. Customer Relation Self-Development Admin Work Technical Skills Responsibilities Implementation, maintenance and further development of the process documentation, Quality Management System, and ISO 9001 certification within Center. Develop and maintain continuous improvement process as part of the QMS. Co-ordinate, conduct and represent Center for internal and external audits (ISO, HSE, other audits), Be the objective contact for all suppliers, customers, and subcontractors of Center issue. Responsible for all Quality tools and procedures implemented in Center Ensuring Compliance to Emerson, Customers, and project requirements Responsible for Record Retention Process within SYSS Carry out in-process inspections as required. Carry out inspections at sub-supplier place as per project requirements. Carry out final Inspection as per the customer PO &amp; specification. Raise non-conformation and follow corrective action on receiving, process and final inspection. Conduct Internal Audits. Building internal Quality awareness amongst employees through trainings &amp; internal communications. Coordinate with Process owners to implement corrective actions on per timeline defined in the Quality Management System. Verify effectiveness of implementation of corrective actions. Apply Now!</p>

<p><strong>Vacancy: Safety Engineer</strong></p><p>An engineering consultancy firm is announcing an opening for a <strong>Safety Engineer</strong> to join its team.</p><p><strong>Key Responsibilities:</strong></p><ul><li>Implement and monitor health and safety policies across the company's sites and offices</li><li>Ensure full compliance with Saudi Civil Defense requirements</li><li>Conduct periodic inspection rounds and address violations</li><li>Prepare risk assessments and investigate incidents</li><li>Develop emergency and evacuation plans and carry out regular drills</li><li>Follow up on safety-related licenses and permits</li></ul><p><strong>Requirements:</strong></p><ul><li>Bachelor's degree in Occupational Health and Safety or a related field</li><li>3–5 years of experience in safety (experience in engineering consultancy or construction is preferred)</li><li>NEBOSH IGC or IOSH Managing Safely certification (a plus)</li><li>Knowledge of ISO 45001 standards (a plus)</li><li>Fluency in both Arabic and English</li></ul><p>&nbsp;</p>

Job Role:We are seeking an experienced QA/QC Engineer to join our project team. This role is ideal for professionals with a Civil Engineering or Architectural background who have hands-on experience in fit-out projects and are looking to transition into quality assurance and quality control functions. The successful candidate will be responsible for ensuring project quality standards, monitoring compliance, and conducting inspections throughout the project lifecycle.<br>Key Responsibilities:Quality Planning & Strategy: Develop and implement quality assurance plans aligned with project specifications and client requirements. Site Inspections & Testing: Conduct regular site visits to inspect materials, workmanship, and construction methods; perform quality testing and sampling as per standards. Documentation & Reporting: Prepare detailed inspection reports, quality checklists, non-conformance reports (NCRs), and maintain comprehensive quality records. Compliance Monitoring: Verify compliance with project drawings, specifications, building codes, and relevant standards (MOI, SPA, international codes). Defect Management: Identify, document, and track defects; coordinate with contractors for corrective actions and re-inspection. Material Verification: Inspect incoming materials and equipment; verify certifications, test reports, and compliance with purchase orders. Coordination: Liaise between design team, contractors, and clients to resolve quality-related issues. Punch List Management: Manage project punch lists and ensure rectification of non-conformances prior to handover. Training & Awareness: Conduct quality awareness sessions with site teams and subcontractors. Photographic Documentation: Maintain photographic records of construction progress and quality issues.<br>Required Qualifications:Bachelor's Degree in Civil Engineering, Architecture, or related field Minimum 5 years of professional experience in construction/fit-out projects with hands-on QA/QC responsibilities. Proven experience working on fit-out, MEP, or interior construction projects. Strong knowledge of construction standards, specifications, and building codes (Saudi Building Code, MOI standards preferred). Proficiency in quality inspection methodologies and testing procedures. Experience with quality management software and MS Office suite. Excellent attention to detail and problem-solving skills. Strong communication and coordination abilities in English and Arabic.

Job Summary We are seeking a detail-oriented QA/QC Engineer to ensure that construction and engineering projects comply with quality standards, project specifications, and regulatory requirements. The ideal candidate will oversee inspections, maintain quality documentation, implement quality management procedures, and support continuous improvement initiatives throughout the project lifecycle. Key Responsibilities Implement and maintain the project's Quality Assurance and Quality Control (QA/QC) procedures. Conduct inspections and monitor construction activities to ensure compliance with project specifications, drawings, and applicable standards. Prepare, review, and maintain quality documentation, including Inspection and Test Plans (ITPs), method statements, checklists, and quality reports. Identify non-conformities (NCRs), investigate root causes, and follow up on corrective and preventive actions (CAPA). Coordinate with project managers, consultants, subcontractors, and site teams to ensure quality requirements are achieved. Ensure compliance with ISO standards, company quality policies, and client requirements. Monitor material inspections, testing activities, and quality records. Participate in internal and external quality audits. Prepare periodic quality reports and provide recommendations for process improvements. Promote a culture of quality, safety, and continuous improvement across project teams. Qualifications Bachelor's degree in Civil Engineering, Mechanical Engineering, or a related engineering discipline.3–5 years of experience in QA/QC within construction or engineering projects. Strong knowledge of ISO standards and Quality Management Systems (QMS). Experience in quality inspections, documentation, reporting, and compliance monitoring. Familiarity with construction codes, engineering standards, and quality control procedures. Proficiency in Microsoft Office and quality documentation systems. Bilingual proficiency in Arabic and English is preferred. Required Skills Strong understanding of QA/QC principles and quality management systems. Excellent inspection, documentation, and reporting skills. Strong analytical and problem-solving abilities. Excellent communication and interpersonal skills. High attention to detail and organizational skills. Ability to work collaboratively with multidisciplinary teams. Strong time management skills and the ability to manage multiple priorities. Commitment to maintaining high-quality standards and continuous improvement.

<h3><strong>About the Role</strong></h3><p>Cummins Arabia is seeking a <strong>Senior Project Engineer Power Generation</strong> to join their team in the Makkah region, specifically covering Jeddah and Makkah. This full-time, product-focused position involves applying specialized engineering principles and design practices to create optimized design concepts and mechanical specifications for power generation systems. The role requires consideration of application, cost, weight, performance, reliability, durability, manufacturing, assembly, and serviceability. It also involves effectively communicating design concept capabilities to meet cross-functional requirements and assessing alternative and competitive design concepts, working across various disciplines to develop corporate and customer requirements, including those needed to resolve product issues.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Obtain input and lead negotiations with cross-functional and cross-discipline technical experts and senior-level designers to communicate component and subsystem design intent through a thorough Design Review package to the Product Preceding Technology (PPT), Value Package Introduction (VPI), or Value Package Change Request (VPCR) team, requiring a holistic assessment of various design concepts.</li><li>Lead design decision-making in component and subsystem design concept selection, concept optimization, and design specifications that impact customers targeted by a given PPT, VPI, or VPCR initiative.</li><li>Apply and lead the execution of processes such as Critical Design Decisions, System Design and Validation Consideration Checklist, and Design Review.</li></ul><h3><strong>Technical Execution and Leadership</strong></h3><ul><li>Utilize and lead the application of tools such as iDFMEA, DVA, GD&amp;T, CREO, and ANSYS Workbench, required to enable high-quality subsystem-level design decision-making and design refinement.</li><li>Provide independent leadership for smaller business impact projects or ownership of complex components, products, systems, or services with greater elements of ambiguity than a senior or lead engineer level, with full accountability to the project team.</li><li>Deliver independent execution of established and emerging work processes and systems, while still developing technology or product knowledge.</li><li>Lead the development and improvement of work processes and systems across a functional discipline area within a business unit site.</li></ul><h3><strong>Team Collaboration and Mentorship</strong></h3><ul><li>Coordinate and direct work among technicians and temporary student employees.</li><li>Assist in the transfer of knowledge to less experienced engineers through either indirect (scope of influence) or direct management of a small, local group of engineers.</li><li>Provide support and guidance to influence technical direction within a project team and continue to develop proficiency in the competency areas critical to success in the role.</li><li>Operate as a recognized specialist in a discipline or product area within the immediate team.</li></ul><h3><strong>Required Experience</strong></h3><p>Candidates for this position should possess <strong>8 to 10 years of relevant experience</strong> in project engineering, specifically within power generation or a related product-focused engineering field.</p><h3><strong>Work Environment</strong></h3><p>This is a <strong>full-time</strong> position based in the <strong>Makkah region</strong>, covering operations in Jeddah and Makkah.</p>

<h3 >About the Role</h3> <p >Nahdi Medical Co. is seeking an <strong >Automation Senior Engineer</strong> to join our team in Jeddah and Makkah. This full-time role is crucial for providing technical support and ensuring the optimal performance of automated material handling equipment within our warehouses and distribution centers. The position requires 5-10 years of experience and involves complex troubleshooting and problem-solving to maintain operational continuity.</p> <h3 >Key Responsibilities</h3> <ul > <li >Modify and troubleshoot system interfaces between Programmable Logic Controls (PLC) and Material Flow Systems (MFS) to ensure continuous production flow.</li> <li >Resolve operational challenges by repairing damaged components such as sensors, scanners, visualization systems, motors, frequency inverters, and encoders.</li> <li >Identify the root cause of faults and production errors, then implement permanent solutions to assure operation continuity.</li> <li >Analyze daily system operation reports to track performance and identify opportunities for continuous improvement.</li> <li >Design and conduct maneuver testing scenarios to identify and address system issues.</li> <li >Design and deliver training programs for all users to enhance system knowledge, resolve issues, and prevent recurrence.</li> <li >Update the help-desk ticketing system to track, monitor, and resolve issues efficiently.</li> <li >Manage the performance of external suppliers and subcontractors to maximize business benefits.</li> <li >Monitor automated system machine performance and generate daily reports for management visibility.</li> <li >Represent Nahdi in an international team focused on automation practices to ensure maximum system uptime and performance.</li> <li >Collaborate with other Material Handling Equipment (MHE) engineers to achieve 360 synergy and full operational capacity.</li> <li >Design system manuals for use in employee induction and on-the-job training.</li> </ul> <h3 >Technical Expertise</h3> <p >The successful candidate will possess a strong foundation in electrical and electronic principles. This includes in-depth knowledge of motors, drivers, controllers, Human-Machine Interfaces (HMIs), and various communication protocols. The role demands proficiency in utilizing diverse technical tools for effective troubleshooting and problem-solving.</p> <h3 >Collaboration and System Uptime</h3> <p >This position requires active collaboration with external software developers and internal onsite teams to ensure maximum system uptime. The Automation Senior Engineer will play a critical role in identifying and implementing improvements, contributing to the overall efficiency and reliability of automated systems.</p> <h3 >Candidate Requirements</h3> <ul > <li >A minimum of 5 to 10 years of experience in a relevant engineering field.</li> <li >Demonstrated ability to perform complex troubleshooting and problem-solving.</li> <li >Commitment to being present whenever the system requires support, including during holidays or days off.</li> </ul> <h3 >Work Environment</h3> <p >The work environment for this role is primarily indoors (80%), with approximately 20% of time spent outdoors. The work schedule consists of 6 working days per week with 1 day off. Daily working hours are 8 hours, including a 1-hour break, and operate on rotating shifts.</p>

About the Company Astek Middle East is part of Astek, a global engineering and technology consulting group founded in France in 1988 and now present on five continents. The Middle East entity delivers IT and technology services across Saudi Arabia, the UAE, and Jordan, supporting clients in public and government, healthcare, transportation, banking, retail, airlines, and tourism. With 10,000 employees worldwide and revenue of €620 million in 2023, Astek focuses on digital transformation and complex systems engineering for international clients. The group promotes a strong culture of entrepreneurship, innovation, and continuous skills development. More information is available on the Astek Saudi Arabia and UAE country pages, and candidates can reach Astek Middle East at contact-astekme@astek-international.com.<br><br>About the Role We are seeking a Senior Mechanical Engineer to support the execution, operation, and maintenance of energy efficiency, building retrofit, and sustainability projects across Saudi Arabia. The role will provide technical mechanical engineering expertise across HVAC systems, plumbing, fire protection, and energy optimization initiatives. The successful candidate will work closely with project managers, contractors, consultants, and multidisciplinary engineering teams to deliver efficient, reliable, and compliant mechanical solutions.<br><br>Responsibilities Provide mechanical engineering expertise across energy efficiency, building retrofit, HVAC, and facility upgrade projects. Review and validate mechanical designs, technical drawings, specifications, and calculations. Conduct site inspections and technical assessments of existing mechanical systems to identify issues, inefficiencies, and opportunities for improvement. Support HVAC system upgrades and energy optimization initiatives aimed at improving building performance and reducing energy consumption. Coordinate with project managers, contractors, consultants, and electrical, civil, and other engineering disciplines. Monitor mechanical works to ensure compliance with approved designs, specifications, quality standards, and project schedules. Prepare and review technical reports, progress updates, engineering documentation, and project deliverables. Support testing, commissioning, and handover activities for mechanical installations. Provide technical solutions to mechanical engineering issues encountered during project execution. Support project planning, resource estimation, scheduling, and cost estimation for mechanical scopes. Ensure mechanical works comply with applicable Saudi regulations, codes, standards, and project requirements.<br><br>Qualifications Bachelor's degree in Mechanical Engineering from a recognized institution.3+ years of relevant professional experience in mechanical engineering. Candidates with extensive experience, including 10+ years, are also encouraged to apply. Professional experience in Saudi Arabia or the GCC is preferred. Demonstrated experience in project coordination, project execution, and/or project management. Valid Saudi Council of Engineers (SCE) registration and membership. Engineering profession reflected on the candidate's Iqama, where applicable. Good command of English, both written and spoken. Strong technical, analytical, communication, and problem-solving skills.<br><br>Required Skills Proficiency in Auto CAD, Revit MEP, or similar mechanical design and drafting software. Strong knowledge of HVAC systems, load calculations, equipment selection, and mechanical system sizing. Familiarity with energy modeling and analysis tools such as HAP, Energy Plus, or e QUEST is an advantage. Understanding of Saudi Building Code (SBC) and relevant ASHRAE standards. Knowledge of mechanical systems including HVAC, plumbing, and fire protection. Proficiency in Microsoft Office, particularly Excel, Word, Power Point, and Project. Familiarity with testing, commissioning, and performance assessment of mechanical systems.<br><br>Preferred Skills Certified Energy Manager (CEM) or Certified Energy Auditor (CEA) certification. PMP or equivalent project management certification. Experience with LEED or green building rating systems. Previous experience in energy services, building retrofit, energy efficiency, or facility upgrade projects. Experience working on projects in Saudi Arabia. Knowledge of renewable energy systems, including rooftop solar PV installations. Experience working within multidisciplinary engineering and project teams.<br><br>What We're Looking For We are looking for an experienced mechanical engineering professional with strong technical knowledge and the ability to take ownership of mechanical engineering activities across project sites. The position is open to candidates with 3+ years of relevant experience, including professionals with significantly more experience who meet the technical and qualification requirements. Interested candidates are encouraged to apply.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Description</b>Overview<p>AtkinsRéalis is seeking an experienced Materials Engineer to oversee material compliance, testing, approvals, and quality assurance activities for major high-rise residential, commercial, hospitality, mixed-use, and large-scale building developments in Madinah, Saudi Arabia. The successful candidate will ensure that all construction materials meet project specifications, Saudi regulations, international standards, and quality requirements throughout the project lifecycle.</p><br>Your role<ul><li>Review and approve material submittals, technical datasheets, manufacturers' certifications, and samples for compliance with project specifications.</li><li>Monitor the quality and suitability of construction materials used in structural, architectural, façade, fit-out, infrastructure, and MEP works.</li><li>Review and verify laboratory test reports, factory acceptance tests, and material certifications.</li><li>Coordinate with approved testing laboratories and witness material testing activities.</li><li>Ensure compliance with Saudi Building Code (SBC), ASTM, ACI, BS, EN, and project-specific material standards.</li><li>Conduct site inspections to verify proper storage, handling, and installation of approved materials.</li><li>Monitor concrete mix designs, trial mixes, and concrete production activities.</li><li>Review and assess material substitutions and value engineering proposals.</li><li>Maintain material approval logs, testing registers, and quality documentation.</li><li>Investigate material-related non-conformances and recommend corrective actions.</li><li>Support QA/QC teams in resolving material quality issues and ensuring compliance with project requirements.</li><li>Coordinate with contractors, suppliers, manufacturers, consultants, and project teams regarding material approvals and testing requirements.</li><li>Participate in technical review meetings, quality audits, and project inspections.</li><li>Monitor compliance with sustainability requirements and approved green building materials.</li><li>Prepare material engineering reports, technical recommendations, and status updates for project management.</li><li>Support project handover activities by ensuring all testing records and material certifications are complete.</li><li>Ensure timely approval of materials to support project construction schedules.</li><li>Assist in developing project material specifications and quality standards.</li><li>Identify risks related to material procurement, quality, and supply chain issues.</li></ul>About you<ul><li>Bachelor's Degree in Civil Engineering, Materials Engineering, Construction Engineering, or a related discipline.</li><li>Master's Degree in Materials Engineering or Construction Materials is preferred.</li><li>Professional registration with the Saudi Council of Engineers (SCE) is preferred.</li><li>Certification in Quality Management or Materials Testing is an advantage.</li><li>Membership in recognized engineering institutions is desirable.</li><li>10 to 15 years of professional experience as a Materials Engineer.</li><li>Minimum 5 years of experience on major high-rise and building construction projects.</li><li>Previous Saudi Arabia or GCC experience is highly preferred.</li><li>Experience working with consultants, PMCs, contractors, testing laboratories, and material suppliers.</li><li>Demonstrated experience in material approvals, laboratory testing, quality assurance, and construction supervision.</li><li>Experience with concrete mix design reviews, material durability assessments, and performance testing.</li><li>Knowledge of façade materials, architectural finishes, waterproofing systems, and specialty building products.</li><li>Ability to evaluate technical compliance and material suitability for complex building projects.</li></ul><span>Rewards &amp; benefits</span><p><span>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.</span></p><br><p><span>This includes:</span></p><br><ul><li>Tax-free salary.</li><li>Life insurance coverage.</li><li>Medical insurance.</li><li>Annual leave balance.</li><li>Company gratuity scheme.</li><li>Discretionary bonus program.</li><li>Annual flight contribution.</li><li>Transportation &amp; housing allowances.</li><li>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition.</li></ul><p><span>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</span></p><br><span>About AtkinsRéalis</span><p><span>We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people. </span></p><br><p><span>Find out more.</span></p><br><p><b>#Med</b></p><br><b>Worker Type</b>Employee<b>Job Type</b>Regular<p><span><i>At </i></span> <i><span>AtkinsRéalis</span></i><span><i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. &nbsp;</i></span></p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

We are looking for an experienced Electrical Testing Engineer to join our team. The ideal candidate will have strong hands-on experience in electrical testing, commissioning, inspection, and troubleshooting of electrical systems and equipment. Key Responsibilities:• Perform electrical testing, inspection, and commissioning activities for electrical systems and equipment.• Conduct testing of transformers, switchgear, circuit breakers, protection systems, CTs, PTs, and other electrical equipment.• Perform insulation resistance, continuity, earth resistance, transformer testing, and related electrical tests.• Carry out relay and protection system testing and verification.• Review electrical drawings, test procedures, and technical specifications.• Identify and troubleshoot electrical faults and testing issues.• Prepare detailed test reports, inspection reports, and technical documentation.• Ensure all testing activities comply with applicable international standards, safety requirements, and approved procedures.• Coordinate with project teams, clients, contractors, and other stakeholders during testing and commissioning activities.• Ensure testing equipment is properly calibrated and maintained.• Support site activities and provide technical recommendations when required. Requirements:• Bachelor’s degree in Electrical Engineering.• 4–6 years of relevant experience in electrical testing and commissioning.• Strong hands-on experience with electrical testing equipment and instruments.• Good knowledge of electrical protection systems and testing procedures.• Experience with LV, MV, and/or HV electrical systems is preferred.• Familiarity with relevant international standards such as IEC, IEEE, and NFPA.• Ability to read and interpret electrical drawings, single-line diagrams, and technical specifications.• Strong troubleshooting and analytical skills.• Good communication and reporting skills.• Willingness to travel to project sites when required. Preferred Certifications:• Electrical Testing & Commissioning certifications.• Protection Relay Testing certification.• Relevant safety certifications. Experience Level: 4–6 Years Employment Type: Full-time

<h3 >About Alqimma Equipment Company</h3> <p >Alqimma Equipment Company is a firm operating within the Makkah region, with a presence in both Jeddah and Makkah. The company is seeking to expand its engineering team with a dedicated professional.</p> <h3 >The Role: Mechanical Manufacturing Engineer</h3> <p >We are looking for a <strong >Mechanical Manufacturing Engineer</strong> to join our team in a <strong >full-time</strong> capacity. This role is designed for an individual with foundational knowledge in mechanical engineering and manufacturing processes, ready to contribute to the company's operational objectives.</p> <h3 >Key Responsibilities</h3> <ul > <li >Assist in the design, development, and improvement of mechanical components and manufacturing processes.</li> <li >Support the optimization of production lines and equipment for efficiency and quality.</li> <li >Participate in the implementation of quality control measures and adherence to engineering standards.</li> <li >Contribute to troubleshooting and resolving technical issues that arise during manufacturing.</li> <li >Prepare and maintain technical documentation, reports, and specifications related to projects.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Bachelor's degree in Mechanical Engineering or a closely related field.</li> <li >0-1 years of professional experience in mechanical engineering, manufacturing, or a relevant industrial setting.</li> <li >Demonstrated understanding of mechanical design principles and manufacturing methodologies.</li> <li >Ability to work effectively within a team environment.</li> </ul> <h3 >Work Location</h3> <p >This full-time position is based within the Makkah region, with work locations including Jeddah and Makkah.</p> <h3 >Application Process</h3> <p >Interested candidates are encouraged to apply for this Mechanical Manufacturing Engineer position. Salary for this role will be discussed directly with qualified applicants during the interview process.</p>

Job Title : Junior Architectural Engineer Interior Location : Saudi Arabia <br>Role Purpose The Interior Design Engineer supports the delivery of interior design and fit-out works by assisting in the coordination, review, and implementation of design and construction activities on site. Working under the guidance of the Senior Interior Design Architect and reporting to the Snr. Design / Technical Manager, the role contributes to shop drawing reviews, material approvals, site inspections, and multidisciplinary coordination to ensure interior works are executed in accordance with approved drawings, specifications, and design intent. The role is primarily site-focused, supporting day-to-day construction activities and resolution of detailing and finishing issues. As part of this, the Interior Design Engineer is expected to actively contribute to basic drafting, detailing, and preparation of sketches or redline drawings (e.g., joinery details, finish transitions, coordination fixes), ensuring timely and practical solutions without over-reliance on dedicated drafting resources.<br>Key Accountabilities Key Activities Site & Construction Support (Interior & Fit-Out) Provide day-to-day interior design and fit-out support on site, addressing construction queries, RFIs, and technical clarifications. Review interior works (finishes, partitions, ceilings, joinery, FF&E interfaces) to verify compliance with approved drawings and specifications. Identify site issues, detailing conflicts, or non-conformances and report to the Senior Interior Design Architect. Coordinate interior works with architectural, structural, MEPF, façade, and specialist contractors to avoid clashes. Support snagging, inspections, quality checks of interior finishes and fit-out works. Prepare and update sketches, mark-ups, and simple interior drawings/details to support site execution (e.g., joinery adjustments, finish interfaces, coordination fixes). Assist in producing red line drawings and as-built markups based on site conditions. Provide hands-on drafting support (Auto CAD/Revit) when required to resolve site issues efficiently. Ensure all sketches/drawings issued are clear, coordinated, and aligned with approved design intent. Shop Drawings, Submittals & As-Built Support Review interior shop drawings, material submittals, finishes, samples, and method statements under supervision. Ensure compliance with design intent, specifications, and project standards. Assist in preparing technical comments and tracking submittal status. Verify that approved materials, finishes, and details are correctly implemented on site. Support preparation and validation of interior as-built drawings and records. Technical Queries, RFIs & NCR Management Assist in preparing responses to RFIs, Technical Queries (TQs), and site clarifications related to interior works. Support investigation and close-out of NCRs, observations, and quality issues. Coordinate with the Senior Interior Design Architect to resolve detailing and coordination issues. Maintain records of technical correspondence and site decisions. Coordination & Communication Coordinate with site engineers, subcontractors, and suppliers on interior and fit-out matters. Interface with other disciplines (Architectural, Structural, MEPF) for coordinated delivery. Attend coordination meetings and provide updates to senior team members. Ensure proper use of document control systems and project workflows. Continuous Improvement & Knowledge Sharing Develop knowledge of interior detailing, materials, and fit-out construction practices. Support lessons learned and continuous improvement initiatives. Seek guidance from senior engineers and contribute to knowledge sharing. Promote best practices in interior construction quality and execution. JOB SPECIFICATIONSIndustry / Domain Design & Build projects with interior design and fit-out scope Multidisciplinary coordination across design and construction phases Interior environments requiring coordination of finishes, FF&E, and detailed fit-out works Necessary Knowledge and Experience Minimum 4–7 years of relevant experience in interior design or fit-out within construction or Design & Build environments Experience supporting shop drawing reviews, material approvals, and site execution Basic understanding of finishes, joinery, and interior detailing Familiarity with multidisciplinary coordination and construction workflows Good command of English (written and spoken) Education and Certification Minimum Requirements Bachelor’s degree in Architecture, Interior Design, or related field Professional certification is an advantage but not mandatory Job Specific and Technical Skills Working knowledge of Auto CAD, Revit, and BIM tools Ability to read and interpret interior drawings and specifications Basic understanding of interior materials, finishes, and detailing Ability to produce basic drawings, sketches, and redlines to support site delivery Good organizational and documentation skills Strong attention to detail (critical for finishes quality)

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Description</b>Overview<p>We are seeking an experienced Construction Engineer to support the delivery of a prestigious large-scale development project in Riyadh, Saudi Arabia. The Construction Engineer will be responsible for supervising and coordinating construction activities, ensuring compliance with project specifications, quality standards, approved schedules, and health and safety requirements. Working closely with the Resident Engineer, Construction Manager, contractors, and multidisciplinary teams, the successful candidate will provide technical oversight, monitor site execution, verify progress, and facilitate the successful completion of complex building and hospitality developments.</p><br>Your role<ul><li>Supervise and monitor construction activities to ensure compliance with approved drawings, specifications, contract requirements, and applicable standards.</li><li>Coordinate daily site activities among contractors, subcontractors, consultants, and project stakeholders.</li><li>Review construction methodologies, work procedures, method statements, and technical submissions.</li><li>Monitor project progress and ensure works are executed in accordance with approved schedules and milestones.</li><li>Assist in identifying construction risks, delays, and technical issues and recommend appropriate solutions.</li><li>Review shop drawings, material submittals, and technical documentation for compliance with project requirements.</li><li>Conduct regular site inspections and ensure construction quality is maintained throughout project execution.</li><li>Coordinate with civil, structural, architectural, MEP, and specialist disciplines to ensure integrated project delivery.</li><li>Verify that construction materials and workmanship meet approved quality standards and specifications.</li><li>Witness inspections, testing activities, and commissioning processes to ensure compliance with project requirements.</li><li>Monitor contractor performance, productivity, and resource allocation.</li><li>Review and respond to Requests for Information (RFIs), site queries, and technical clarifications.</li><li>Ensure compliance with approved Quality Assurance and Quality Control procedures.</li><li>Monitor Health, Safety, and Environmental (HSE) compliance and report unsafe conditions or practices.</li><li>Verify quantities and completed works to support progress reporting and payment certification.</li><li>Participate in project coordination meetings, technical reviews, and progress meetings.</li><li>Assist with the management of variations, site instructions, and non-conformance reports.</li><li>Support testing, commissioning, snagging, de-snagging, and handover activities.</li><li>Maintain accurate project records, inspection reports, and technical documentation.</li><li>Contribute to project closeout activities and final documentation submissions.</li></ul>About you<ul><li>Bachelor’s Degree in Civil Engineering, Construction Engineering, or a related engineering discipline.</li><li>Minimum 10+ years of overall professional experience in construction and site supervision.</li><li>Minimum 5 years of experience as a Construction Engineer on major building projects.</li><li>Proven experience in large-scale buildings, convention centers, hotels, resorts, mixed-use developments, commercial complexes, or hospitality projects.</li><li>Experience within Site Supervision Consultancy, PMC, or Engineering Consultancy environments is highly preferred.</li><li>Strong understanding of construction methodologies, sequencing, and project execution processes.</li><li>Experience reviewing shop drawings, material submissions, method statements, and technical reports.</li><li>Knowledge of international building codes, construction standards, and engineering best practices.</li><li>Familiarity with QA/QC procedures, inspection requirements, and testing protocols.</li><li>Working knowledge of construction contracts, including FIDIC principles, is desirable.</li><li>Strong problem-solving and technical coordination skills.</li><li>Proficiency in Microsoft Office and engineering software applications.</li><li>Experience working on projects in Saudi Arabia or the GCC region is highly preferred.</li><li>Excellent communication, report-writing, and stakeholder management skills.</li><li>Membership in a recognized professional engineering institution is an advantage.</li><li>Fluency in English is required; Arabic language skills are an advantage.</li></ul><span>Rewards &amp; benefits</span><p><span>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.</span></p><br><p><span>This includes:</span></p><br><ul><li>Tax-free salary.</li><li>Life insurance coverage.</li><li>Medical insurance.</li><li>Annual leave balance.</li><li>Company gratuity scheme.</li><li>Discretionary bonus program.</li><li>Annual flight contribution.</li><li>Transportation &amp; housing allowances.</li><li>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, familycare, personal health, fitness, and nutrition.</li></ul><p><span>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</span></p><br><span>About AtkinsRéalis</span><p><span>We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people. </span></p><br><p><span>Find out more.</span></p><br><b>Worker Type</b>Employee<b>Job Type</b>Regular<p><span><i>At </i></span> <i><span>AtkinsRéalis</span></i><span><i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. &nbsp;</i></span></p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h3 >About SYSTRA Arabia</h3> <p >SYSTRA Arabia is seeking a <strong >Track Design Engineer</strong> to provide Project Management Consultancy (PMC) services for a significant client in Saudi Arabia. This role is integral to supporting major rail projects within the region.</p> <h3 >The Role of Track Design Engineer</h3> <p >The Track Design Engineer will focus on leading and assuring track alignment design for various rail projects. This involves aligning multidisciplinary interfaces and ensuring project delivery adheres to client standards and specifications.</p> <h3 >Key Responsibilities</h3> <ul > <li >Support the Engineering Lead in reviewing horizontal and vertical alignment design for mainline, depot, and yard tracks using industry-standard tools such as Bentley OpenRail, Civil 3D, and MX.</li> <li >Define and enforce geometric design criteria, alignment control parameters, and tolerances across all project phases, including concept, preliminary, and detailed design.</li> <li >Conduct design checks, optioneering, and value engineering for alignments, turnouts, crossovers, and transition curves to optimize performance, maintainability, and cost efficiency.</li> <li >Ensure compliance with international and regional rail standards and client-specific requirements, integrating RAMS, maintainability, and ride quality considerations into designs.</li> <li >Act as the integrated PMC representative to the client, coordinating multi-disciplinary interfaces across civil, structures, trackwork, OCS, signaling, drainage, and utilities.</li> <li >Manage technical queries, change requests, and design approvals, maintaining clear audit trails and configuration control throughout the project lifecycle.</li> <li >Lead design risk management for alignment choices, considering factors such as ground conditions, utilities, third-party constraints, and environmental impacts.</li> <li >Oversee contractor and designer performance on alignment deliverables, ensuring adherence to baseline schedules and quality standards.</li> <li >Maintain design schedules, registers, and progress reporting for all alignment-related works.</li> <li >Prepare and present technical reports, design review comments, and decision logs to client stakeholders.</li> <li >Ensure constructability and staging are embedded in alignment design, providing support to site teams during construction and responding to Requests for Information (RFIs).</li> <li >Implement robust quality assurance processes, including independent design reviews and verification/validation activities.</li> <li >Align deliverables with Kingdom of Saudi Arabia (KSA) authority requirements and applicable standards, supporting permitting and approvals processes.</li> <li >Engage with stakeholders, authorities, and third parties to resolve constraints, protect corridors, and secure necessary approvals.</li> </ul> <h3 >Required Experience and Skills</h3> <p >Candidates for this position should possess a solid design background in track engineering.</p> <ul > <li >A minimum of <strong >5 to 10 years of experience</strong> in track design.</li> <li >Proficiency in industry-standard design tools such as Bentley OpenRail, Civil 3D, or MX.</li> <li >Demonstrated ability to define and enforce geometric design criteria and alignment control parameters.</li> <li >Strong understanding of international and regional rail standards, including KSA authority requirements.</li> <li >Experience in coordinating multi-disciplinary interfaces and managing design risks.</li> <li >Ability to prepare technical reports and present findings to stakeholders.</li> </ul> <h3 >Location and Work Type</h3> <p >This is a <strong >full-time</strong> position based in <strong >Dammam, Eastern, Saudi Arabia</strong>.</p> <h3 >Application Process</h3> <p >Interested candidates are invited to submit their application for consideration.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring for the position of <b>Shift Charge Engineer</b> in <b>Saudi Arabia / Middle East</b>. The requirement is for conventional power plant O&amp;M and water desalination operations involving steam turbines, gas turbines, conventional power generation systems, and desalination facilities. Skilled and motivated power-plant professionals with strong shift-operation and plant-safety expertise are encouraged to apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Lead and control shift operations of steam turbine, gas turbine, conventional power plant, and associated utility systems.<br></li><li>Monitor plant operating parameters and take corrective action to maintain safe, stable, and efficient operation.<br></li><li>Coordinate plant start-up, shutdown, synchronization, load changes, equipment changeovers, and emergency operating activities.<br></li><li>Supervise field operators and control-room personnel during assigned shifts.<br></li><li>Coordinate with maintenance teams for equipment isolation, permit-to-work activities, troubleshooting, and restoration.<br></li><li>Monitor water desalination and associated water-treatment systems where included within plant operations.<br></li><li>Respond to plant alarms, trips, abnormal operating conditions, and emergency situations according to approved operating procedures.<br></li><li>Maintain accurate shift logs, operating records, handover reports, incident documentation, and production data.<br></li></ul>Required Skills<br><p><b>Power Plant Operations:</b> Strong understanding of continuous operation and monitoring of conventional generating stations.<br></p><br><p><b>Steam Turbine Operations:</b> Knowledge of steam turbine auxiliaries, operating parameters, start-up, shutdown, protection, and troubleshooting.<br></p><br><p><b>Gas Turbine Operations:</b> Familiarity with gas turbine operation, auxiliaries, control systems, alarms, trips, and operating procedures.<br></p><br><p><b>Shift Operations &amp; Control:</b> Ability to supervise plant operating activities and coordinate safely across control-room and field teams.<br></p><br><p><b>Plant Safety &amp; Permit Systems:</b> Practical understanding of PTW, isolation, LOTO, emergency response, and safe operating procedures.<br></p><br>Preferred Skills<br><ul><li>Water desalination plant operating exposure.<br></li><li>Middle East power or utility-sector experience.<br></li><li>Experience with DCS-based power plant control and monitoring.<br></li></ul>Work Experience Requirements<br><p>The source does not specify an experience requirement. <b>Typical for this level of responsibility:</b> candidates generally require substantial hands-on experience in power-plant operations, including independent shift responsibilities and exposure to steam turbine, gas turbine, or conventional generation environments.<br></p><br><p>Supervisory experience in continuous-process power or utility facilities is typically preferred for a Shift Charge Engineer position.<br></p><br>Education<br><b>Minimum:</b> Typical — Degree/Diploma in Mechanical, Electrical, Power, or related Engineering discipline<br><br> <b>Preferred:</b> Relevant postgraduate qualification or advanced power-plant operations certification<br><br> <b>Additional:</b> Plant safety, PTW/LOTO, turbine operations, or utility-operation certifications where applicable<br><br>Contact No-9786888866<br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>We are looking for a highly talented Android Engineer to join the Fulfillment team in Riyadh . If you are looking for a place where you can gain hands-on experience and create a direct impact, then this may be the place for you! An ideal candidate will have a track record as a significant individual contributor as well as a strong team player.</p><p>You will be working on:</p><ul><li>Keep abreast of the latest software development methodologies in order to be able to provide best-in-class software solutions</li><li>Analyze product requirements in order to understand engineering requirements, evaluate the technical feasibility, estimate efforts, and provide the required solutions in collaboration with the Product Team</li><li>Assist in building development components and managing the programming of the different solution components in order to transform the requirements into actual working software accurately</li><li>Document all coding steps in order to ensure comprehensibility and facilitate future modifications and maintenance</li><li>Responsible for writing unit, integration, and UI / Snapshot testing.</li><li>Investigate and resolve issues and bugs through patches and other means</li><li>Collaborate with other colleagues in order to assist each other in code reviews and deliver code review reports accordingly</li><li>Perform functional and module testing in order to ensure the functionality of delivered solutions</li><li>Monitor evaluate and report on product development and recommend improvements where necessary</li><li>Assist in user trials and acceptance testing</li></ul><p><strong>Desired Candidate Profile</strong></p><p>3+ years of experience in developing software, with practical knowledge of design patterns and algorithms, ideally with Kotlin as a primary development language, but Java would suffice too. You are open-minded about technologies but particularly skilled in native Android development. Hands-on experience writing high-quality, testable code, also proficiency with modern mobile architectures. In-depth knowledge of mobile engineering lifecycle for fragments, activities, and practical experience with Agile methodologies (SCRUM or Kanban would do). Engineering excellence - a proven track record of substantially impacting the development of complex non-trivial systems. Open-source contributions and technical publications are very much welcome! Execution - getting things done mentality. Ability to manage multiple projects at the same time, with high prioritization skills and experience with versioning tools (Git). You are experienced and on track with Modern Android Development approaches skillsets and practices. We are looking for practical knowledge of ViewModel, LiveData, Paging, Navigation, SafeArgs, Retrofit2, RxJava2, Dagger2 (multi-module applications). Understanding of Modular App Architecture. Understanding of CI/CD pipeline. Ability to write new modules using maintainable architecture.</p><p>Nice-to-Have skills: Knowledge of Firebase, Google Maps API, Fastlane scripting, and Checkout.com SDK.</p>

<p>We are looking for a highly talented Senior Android Engineer to join the team in Riyadh . If you are looking for a place where you can gain hands-on experience and create a direct impact, then this may be the place for you! An ideal candidate will have a track record as a significant individual contributor as well as a strong team player.</p><p>You will be working on:</p><ul><li>Keep abreast of the latest software development methodologies in order to be able to provide best-in-class software solutions</li><li>Analyze product requirements in order to understand engineering requirements, evaluate the technical feasibility, estimate efforts, and provide the required solutions in collaboration with the Product Team</li><li>Assist in building development components and managing the programming of the different solution components in order to transform the requirements into actual working software accurately</li><li>Document all coding steps in order to ensure comprehensibility and facilitate future modifications and maintenance</li><li>Responsible for writing unit, integration, and UI / Snapshot testing.</li><li>Investigate and resolve issues and bugs through patches and other means</li><li>Collaborate with other colleagues in order to assist each other in code reviews and deliver code review reports accordingly</li><li>Perform functional and module testing in order to ensure the functionality of delivered solutions</li><li>Monitor evaluate and report on product development and recommend improvements where necessary</li><li>Assist in user trials and acceptance testing</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>5+ years of software development experience, with a strong foundation in design patterns and algorithms (Kotlin preferred, Java background accepted).</li><li>Technology-agnostic mindset with deep expertise in native Android development.</li><li>Hands-on experience delivering high-quality, testable code using modern mobile architectures.</li><li>In-depth understanding of the Android lifecycle (Activities, Fragments) and practical experience with Agile frameworks (Scrum/Kanban).</li><li>Engineering excellence-a proven track record of driving significant impact on complex, non-trivial systems.</li><li>Open-source contributions and technical publications are a strong plus.</li><li>Execution-driven mindset with strong project prioritization, multi-tasking abilities, and mastery of version control tools (Git).</li><li>Deep familiarity with Modern Android Development (MAD) practices and toolkits, including ViewModel, LiveData, Paging, Navigation, SafeArgs, Retrofit2, RxJava2, and multi-module Dagger2 setups.</li><li>Passion for elegant design and architectural modularization; experience with native iOS or Flutter is highly desirable.</li><li>Solid understanding of modular app architecture principles and CI/CD pipelines.</li><li>Ability to design and implement maintainable, scalable new modules.</li><li>Familiarity with AI tools, APIs, and machine learning integration within mobile applications.</li><li>Cross-platform versatility with hands-on experience in both Android and iOS ecosystems.</li><li>Nice to Have: Experience with Firebase, Google Maps API, Fastlane automation, and the Checkout.com SDK.</li></ul>

<h3 >About the Role</h3> <p >Wood (KSA) is seeking a <strong >Piping Engineer</strong> to join its Projects business. This full-time role supports a project site located approximately 150 km from Riyadh, Saudi Arabia, focusing on engineering design within the energy and materials sectors. The successful candidate will contribute to various projects, ensuring adherence to design principles and industry standards.</p> <h3 >Key Responsibilities</h3> <ul > <li >Responsible for piping design, plant layout, piping stress concepts, and general requirements from construction, maintenance, and operability perspectives.</li> <li >Originate new engineering deliverables and revise existing ones.</li> <li >Review and check engineering deliverables against company procedures, standards, and checklists.</li> <li >Supervise engineering work produced by junior team members.</li> <li >Participate in and conduct job-related training as required.</li> <li >Plan and complete work effectively within allocated man-hours, ensuring timely delivery.</li> <li >Interface, coordinate, and communicate effectively with the Project Manager and other team members.</li> <li >Delegate and distribute work, managing team billability.</li> <li >Coordinate with all disciplines as necessary for the preparation and development of deliverables, ensuring incorporation of other disciplines' input.</li> <li >Conduct site visits to verify conditions and perform mark-up drawings or as-built activities.</li> <li >Manage deliverables submission, including required quality checks and proper record management.</li> <li >Perform technical report writing and prepare presentations.</li> <li >Conduct vendor document review and manage subcontract scope.</li> </ul> <h3 >Required Experience and Qualifications</h3> <ul > <li >5-10 years of experience as an Engineer in oil and gas, hydrocarbon refinery, offshore, mining, or infrastructure industries, with a focus on engineering design projects.</li> <li >Possess full knowledge of Aramco standards.</li> </ul> <h3 >About Wood</h3> <p >Wood is a global leader in consulting, engineering, and operations for the energy and materials sectors. With a workforce of 33,000 professionals across approximately 50 countries, Wood supports clients throughout the full asset lifecycle. The company delivers safe, predictable outcomes while enabling resilient operations and contributing to a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara, a global partnership that unites leading multidisciplinary engineering, design, and project management companies.</p> <h3 >Work Location and Type</h3> <p >This is a <strong >full-time</strong> position based in <strong >Riyadh, Saudi Arabia</strong>, with work primarily supporting a project site located approximately 150 km from the city. The role involves working within a project-focused environment.</p> <h3 >Application Information</h3> <p >Candidates meeting the specified requirements are encouraged to apply for this position.</p>

<p><br></p><p><b>RESPONSIBILITIES</b></p><ul><li>Monitor MEP installation works to ensure compliance with approved drawings, specifications, method statements, and applicable standards.</li><li>Conduct regular site inspections and monitor workmanship, installation quality, and construction progress.</li><li>Witness inspections, testing, pre-commissioning, and commissioning activities for assigned MEP systems.</li><li>Review installation readiness and coordinate inspection requests with QA/QC teams.</li><li>Coordinate interfaces between MEP, CSA, commissioning, vendors, and contractor teams.</li><li>Monitor contractor progress, manpower, material availability, and work sequencing.</li><li>Identify installation deficiencies, clashes, incomplete works, and technical issues.</li><li>Report deficiencies, construction risks, and unresolved issues to the Senior Construction Manager.</li><li>Support resolution of technical queries, site issues, and coordination conflicts.</li><li>Review relevant shop drawings, technical submittments, method statements, and installation documentation.</li><li>Verify that installed systems align with approved design intent and project requirements.</li><li>Support progress measurement and preparation of site status reports.</li><li>Coordinate with contractors and vendors to close punch list items and outstanding works.</li><li>Support system testing, energization, functional testing, and commissioning activities.</li><li>Ensure required inspection records, test results, and site documentation are properly maintained.</li><li>Participate in site coordination, technical, and construction progress meetings.</li><li>Support final system turnover, handover, and closeout documentation.</li></ul><p>POSITION DETAILS</p><p>Position: MEP Site Engineer</p><p>Work Setting: Full-Time Onsite</p><p>Role Type: RFP Mandatory Key Personnel</p><p>Reporting To: Senior Construction Manager</p><p>Industry: Data Centers / Mission-Critical MEP Construction</p><p>PRODUCTIVITY TOOLS</p><ul><li>Microsoft Office</li><li>Microsoft Excel</li><li>Microsoft Word</li><li>Construction Management Systems</li><li>Inspection and Reporting Tools</li><li>Document Control Platforms</li><li>MEP Coordination and Drawing Review Tools</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><b>Required Qualifications</b></li><li>Bachelor's degree in Mechanical Engineering, Electrical Engineering, Electromechanical Engineering, or a related discipline.</li><li>Relevant professional registration or certification.</li><li>Minimum 10 years of overall professional experience.</li><li>Minimum 8 years of relevant MEP construction or site engineering experience.</li><li>Minimum 6 years of experience on similar large-scale projects.</li><li>Strong experience in MEP installation and construction supervision.</li><li>Experience with cooling systems, electrical distribution, mechanical systems, plumbing, controls, or other mission-critical MEP infrastructure.</li><li>Strong knowledge of approved drawings, technical specifications, inspection requirements, and construction standards.</li><li>Experience witnessing inspections, testing, and commissioning activities.</li><li>Strong coordination skills across MEP, CSA, commissioning, QA/QC, and contractor teams.</li><li>Ability to identify construction deficiencies and communicate corrective requirements clearly.</li><li>Strong technical, organizational, communication, and problem-solving skills.</li><li><b>Preferred Qualifications</b></li><li>Saudi Council of Engineers (SCE) registration.</li><li>Experience on hyperscale data center or mission-critical projects.</li><li>Strong experience with data center cooling systems and critical MEP infrastructure.</li><li>Experience on industrial construction or complex infrastructure projects.</li><li>Familiarity with commissioning and integrated systems testing.</li><li>Experience working in KSA or the wider GCC region.</li><li>Familiarity with electronic inspection, reporting, and document management systems.</li></ul>

<p>Looking for an experienced qualified and experienced inspection professionals to support GIS / PID activities for Saudi Aramco projects in Saudi Arabia. We currently looking for individuals in various categories, including:</p><p><br><strong>CURRENT REQUIREMENTS – APPLY NOW! </strong></p><ul><li><p><strong>Welding Inspectors – AWS / CSWIP 3.1 or equivalent </strong></p></li><li><p><strong>Electrical Inspectors </strong></p></li><li><p><strong>Instrumentation Inspectors </strong></p></li><li><p><strong>Communication Inspectors </strong></p></li><li><p><strong>Plumbing Inspectors </strong></p></li><li><p><strong>Rotating Equipment Inspectors </strong></p></li><li><p><strong>Senior Mechanical Inspectors – CSWIP 3.2 or equivalent </strong></p><br><p><strong>FUTURE REQUIREMENTS – BUILD YOUR OPPORTUNITY WITH US! </strong></p></li><li><p><strong>Civil Inspectors </strong></p></li><li><p><strong>Coating Inspectors – CSWIP-BGAS 2 / NACE Level 2 (AMPP) or equivalent </strong></p></li><li><p><strong>HVAC Inspectors </strong></p></li><li><p><strong>Piping/RTR Inspectors</strong></p></li><li><p><strong>Static Equipment Inspectors</strong></p></li></ul><br><p><strong>Basic Function:</strong></p><ul><li><p>The basic function of the Project Inspectors is to perform inspection services to verify the quality EPC work during the course of the projects.</p></li></ul><br><p><strong>Scope:</strong></p><ul><li><p>The incumbent will monitor and/or perform quality activities at all stages of projects. The incumbent will ensure contractor’s work is in compliance with all applicable requirements including without limitation SAUDI ARAMCO engineering requirements, standards, procedures, specifications, and schedule Q of the project contract. The incumbent will provide training to others as and when required. Duties may require physical exertion, working outdoors, confined spaces, high elevations, and remote work locations, and on or off-shore.</p></li></ul><br><p><strong>Principal Duties:</strong></p><ol type="1"><li><p>Perform “Hold”, “Witness” and “Surveillance” inspections and tests at manufacturing facilities or construction sites to ensure compliance with SAUDI ARAMCO requirements and project specifications.</p></li><li><p>Inspect material and equipment as applicable to ensure compliance with SAUDI ARAMCO requirements for proper handling, storage and protection at SAUDI ARAMCO facilities and/or construction sites.</p></li><li><p>Monitor Contractor’s Quality systems, records and Quality Personnel for compliance with requirements.</p></li><li><p>Review and evaluate Contractor’s Quality document submittals.</p></li><li><p>Witness on-site and off-site material and installations test for compliance with SAUDI ARAMCO STANDARDS.</p></li><li><p>Record legibly and accurately all controversial and non-complying construction practices, materials and equipment and report to supervisor detailed potential problems for early resolution.</p></li><li><p>Write inspection reports and initiate Non-Conformance Reports (NCRs), Worksheet (WSs) and Equipment Deficiency Report (EDRs) as needed.</p></li></ol><p><br></p><p><strong>Desired Candidate Profile</strong></p><p><strong>Minimum Requirements:</strong></p><ol type="1"><li><p>BS degree in Engineering in a respective inspection discipline with at least four (4) years of experience in the relevant inspection discipline. OR two (2) years of industrial/technical College Diploma plus a minimum of eight (8) years of relevant inspection experience.</p></li><li><p>Demonstrate thorough knowledge of applicable international standards.</p></li><li><p>Demonstrated full working knowledge of quality system standards and methods.</p></li><li><p>Inspectors are expected to hold internationally recognized certifications in the discipline for which they are qualified. For example; welding inspector AWS or CSWIP, coating BGAS/SCWIP or NACE, mechanical inspector API 563 for Tanks, API 570, API 510 or ASME certified for Pressure Vessels, Boilers and Heat Exchangers, and ASNT Level II in MT, PT, UT & VT, RTFI, Electrical Inspector NCPCCI, NFPA 70, ICBO, SMACNA, Uniform Mechanical Code, NFPA 90A, ASHRAE, communication inspector BICSI, API 936 for Civil Inspector if required, etc.</p></li></ol><p><br></p><p><strong>All the above positions require the following:</strong></p><ul><li><p>Preferably, candidates should have experience with Saudi ARAMCO or hold Saudi ARAMCO approval.</p></li><li><p>Candidates who have successfully passed a computer-based test (CBT) will have an added advantage.</p></li><li><p>Candidates must hold a valid Saudi or UAE driving license (for a four-wheel car).</p></li><li><p>Candidates should be available to start work immediately.</p></li></ul><p><br>DON’T MISS YOUR CHANCE – APPLY TODAY!</p><p><br></p><p><strong>Submit your application through our Candidate Information Form:</strong></p><ul><li><p>https://forms.gle/gsaGZ35P2sibR4h58<br><br></p></li></ul>